diff --git a/sys/cam/ata/ata_da.c b/sys/cam/ata/ata_da.c index c29235e64e81..a8b67b2254a6 100644 --- a/sys/cam/ata/ata_da.c +++ b/sys/cam/ata/ata_da.c @@ -1,3698 +1,3716 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2009 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ada.h" #include #ifdef _KERNEL #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #endif /* _KERNEL */ #ifndef _KERNEL #include #include #endif /* _KERNEL */ #include #include #include #include #include #include #include #include #include #ifdef _KERNEL #define ATA_MAX_28BIT_LBA 268435455UL extern int iosched_debug; typedef enum { ADA_STATE_RAHEAD, ADA_STATE_WCACHE, ADA_STATE_LOGDIR, ADA_STATE_IDDIR, ADA_STATE_SUP_CAP, ADA_STATE_ZONE, ADA_STATE_NORMAL } ada_state; typedef enum { ADA_FLAG_CAN_48BIT = 0x00000002, ADA_FLAG_CAN_FLUSHCACHE = 0x00000004, ADA_FLAG_CAN_NCQ = 0x00000008, ADA_FLAG_CAN_DMA = 0x00000010, ADA_FLAG_NEED_OTAG = 0x00000020, ADA_FLAG_WAS_OTAG = 0x00000040, ADA_FLAG_CAN_TRIM = 0x00000080, ADA_FLAG_OPEN = 0x00000100, ADA_FLAG_SCTX_INIT = 0x00000200, ADA_FLAG_CAN_CFA = 0x00000400, ADA_FLAG_CAN_POWERMGT = 0x00000800, ADA_FLAG_CAN_DMA48 = 0x00001000, ADA_FLAG_CAN_LOG = 0x00002000, ADA_FLAG_CAN_IDLOG = 0x00004000, ADA_FLAG_CAN_SUPCAP = 0x00008000, ADA_FLAG_CAN_ZONE = 0x00010000, ADA_FLAG_CAN_WCACHE = 0x00020000, ADA_FLAG_CAN_RAHEAD = 0x00040000, ADA_FLAG_PROBED = 0x00080000, ADA_FLAG_ANNOUNCED = 0x00100000, ADA_FLAG_DIRTY = 0x00200000, ADA_FLAG_CAN_NCQ_TRIM = 0x00400000, /* CAN_TRIM also set */ ADA_FLAG_PIM_ATA_EXT = 0x00800000, ADA_FLAG_UNMAPPEDIO = 0x01000000, ADA_FLAG_ROTATING = 0x02000000 } ada_flags; #define ADA_FLAG_STRING \ "\020" \ "\002CAN_48BIT" \ "\003CAN_FLUSHCACHE" \ "\004CAN_NCQ" \ "\005CAN_DMA" \ "\006NEED_OTAG" \ "\007WAS_OTAG" \ "\010CAN_TRIM" \ "\011OPEN" \ "\012SCTX_INIT" \ "\013CAN_CFA" \ "\014CAN_POWERMGT" \ "\015CAN_DMA48" \ "\016CAN_LOG" \ "\017CAN_IDLOG" \ "\020CAN_SUPCAP" \ "\021CAN_ZONE" \ "\022CAN_WCACHE" \ "\023CAN_RAHEAD" \ "\024PROBED" \ "\025ANNOUNCED" \ "\026DIRTY" \ "\027CAN_NCQ_TRIM" \ "\030PIM_ATA_EXT" \ "\031UNMAPPEDIO" \ "\032ROTATING" typedef enum { ADA_Q_NONE = 0x00, ADA_Q_4K = 0x01, ADA_Q_NCQ_TRIM_BROKEN = 0x02, ADA_Q_LOG_BROKEN = 0x04, ADA_Q_SMR_DM = 0x08, ADA_Q_NO_TRIM = 0x10, ADA_Q_128KB = 0x20 } ada_quirks; #define ADA_Q_BIT_STRING \ "\020" \ "\0014K" \ "\002NCQ_TRIM_BROKEN" \ "\003LOG_BROKEN" \ "\004SMR_DM" \ "\005NO_TRIM" \ "\006128KB" typedef enum { ADA_CCB_RAHEAD = 0x01, ADA_CCB_WCACHE = 0x02, ADA_CCB_BUFFER_IO = 0x03, ADA_CCB_DUMP = 0x05, ADA_CCB_TRIM = 0x06, ADA_CCB_LOGDIR = 0x07, ADA_CCB_IDDIR = 0x08, ADA_CCB_SUP_CAP = 0x09, ADA_CCB_ZONE = 0x0a, ADA_CCB_TYPE_MASK = 0x0F, } ada_ccb_state; typedef enum { ADA_ZONE_NONE = 0x00, ADA_ZONE_DRIVE_MANAGED = 0x01, ADA_ZONE_HOST_AWARE = 0x02, ADA_ZONE_HOST_MANAGED = 0x03 } ada_zone_mode; typedef enum { ADA_ZONE_FLAG_RZ_SUP = 0x0001, ADA_ZONE_FLAG_OPEN_SUP = 0x0002, ADA_ZONE_FLAG_CLOSE_SUP = 0x0004, ADA_ZONE_FLAG_FINISH_SUP = 0x0008, ADA_ZONE_FLAG_RWP_SUP = 0x0010, ADA_ZONE_FLAG_SUP_MASK = (ADA_ZONE_FLAG_RZ_SUP | ADA_ZONE_FLAG_OPEN_SUP | ADA_ZONE_FLAG_CLOSE_SUP | ADA_ZONE_FLAG_FINISH_SUP | ADA_ZONE_FLAG_RWP_SUP), ADA_ZONE_FLAG_URSWRZ = 0x0020, ADA_ZONE_FLAG_OPT_SEQ_SET = 0x0040, ADA_ZONE_FLAG_OPT_NONSEQ_SET = 0x0080, ADA_ZONE_FLAG_MAX_SEQ_SET = 0x0100, ADA_ZONE_FLAG_SET_MASK = (ADA_ZONE_FLAG_OPT_SEQ_SET | ADA_ZONE_FLAG_OPT_NONSEQ_SET | ADA_ZONE_FLAG_MAX_SEQ_SET) } ada_zone_flags; static struct ada_zone_desc { ada_zone_flags value; const char *desc; } ada_zone_desc_table[] = { {ADA_ZONE_FLAG_RZ_SUP, "Report Zones" }, {ADA_ZONE_FLAG_OPEN_SUP, "Open" }, {ADA_ZONE_FLAG_CLOSE_SUP, "Close" }, {ADA_ZONE_FLAG_FINISH_SUP, "Finish" }, {ADA_ZONE_FLAG_RWP_SUP, "Reset Write Pointer" }, }; /* Offsets into our private area for storing information */ #define ccb_state ppriv_field0 #define ccb_bp ppriv_ptr1 typedef enum { ADA_DELETE_NONE, ADA_DELETE_DISABLE, ADA_DELETE_CFA_ERASE, ADA_DELETE_DSM_TRIM, ADA_DELETE_NCQ_DSM_TRIM, ADA_DELETE_MIN = ADA_DELETE_CFA_ERASE, ADA_DELETE_MAX = ADA_DELETE_NCQ_DSM_TRIM, } ada_delete_methods; static const char *ada_delete_method_names[] = { "NONE", "DISABLE", "CFA_ERASE", "DSM_TRIM", "NCQ_DSM_TRIM" }; #if 0 static const char *ada_delete_method_desc[] = { "NONE", "DISABLED", "CFA Erase", "DSM Trim", "DSM Trim via NCQ" }; #endif struct disk_params { u_int8_t heads; u_int8_t secs_per_track; u_int32_t cylinders; u_int32_t secsize; /* Number of bytes/logical sector */ u_int64_t sectors; /* Total number sectors */ }; #define TRIM_MAX_BLOCKS 8 #define TRIM_MAX_RANGES (TRIM_MAX_BLOCKS * ATA_DSM_BLK_RANGES) struct trim_request { uint8_t data[TRIM_MAX_RANGES * ATA_DSM_RANGE_SIZE]; TAILQ_HEAD(, bio) bps; }; struct ada_softc { struct cam_iosched_softc *cam_iosched; int outstanding_cmds; /* Number of active commands */ int refcount; /* Active xpt_action() calls */ ada_state state; ada_flags flags; ada_zone_mode zone_mode; ada_zone_flags zone_flags; struct ata_gp_log_dir ata_logdir; int valid_logdir_len; struct ata_identify_log_pages ata_iddir; int valid_iddir_len; uint64_t optimal_seq_zones; uint64_t optimal_nonseq_zones; uint64_t max_seq_zones; ada_quirks quirks; ada_delete_methods delete_method; int trim_max_ranges; int read_ahead; int write_cache; #ifdef CAM_TEST_FAILURE int force_read_error; int force_write_error; int periodic_read_error; int periodic_read_count; #endif struct ccb_pathinq cpi; struct disk_params params; struct disk *disk; struct task sysctl_task; struct sysctl_ctx_list sysctl_ctx; struct sysctl_oid *sysctl_tree; struct callout sendordered_c; struct trim_request trim_req; uint64_t trim_count; uint64_t trim_ranges; uint64_t trim_lbas; #ifdef CAM_IO_STATS struct sysctl_ctx_list sysctl_stats_ctx; struct sysctl_oid *sysctl_stats_tree; u_int timeouts; u_int errors; u_int invalidations; #endif #define ADA_ANNOUNCETMP_SZ 80 char announce_temp[ADA_ANNOUNCETMP_SZ]; #define ADA_ANNOUNCE_SZ 400 char announce_buffer[ADA_ANNOUNCE_SZ]; }; +static uma_zone_t ada_ccb_zone; + struct ada_quirk_entry { struct scsi_inquiry_pattern inq_pat; ada_quirks quirks; }; static struct ada_quirk_entry ada_quirk_table[] = { { /* Sandisk X400 */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SanDisk?SD8SB8U1T00*", "X4162000*" }, /*quirks*/ADA_Q_128KB }, { /* Hitachi Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Hitachi H??????????E3*", "*" }, /*quirks*/ADA_Q_4K }, { /* Samsung Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD155UI*", "*" }, /*quirks*/ADA_Q_4K }, { /* Samsung Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD204UI*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST????DL*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Barracuda Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST???DM*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Barracuda Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST????DM*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9500423AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9500424AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9640423AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9640424AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9750420AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9750422AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST9750423AS*", "*" }, /*quirks*/ADA_Q_4K }, { /* Seagate Momentus Thin Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST???LT*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Red Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????CX*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????RS*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Green/Red Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????RX*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Red Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD??????CX*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????AZEX*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD????FZEX*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD??????RS*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD??????RX*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Scorpio Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD???PKT*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Scorpio Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD?????PKT*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Scorpio Blue Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD???PVT*", "*" }, /*quirks*/ADA_Q_4K }, { /* WDC Scorpio Blue Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WD?????PVT*", "*" }, /*quirks*/ADA_Q_4K }, /* SSDs */ { /* * Corsair Force 2 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair CSSD-F*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Corsair Force 3 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Force 3*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Corsair Neutron GTX SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Neutron GTX*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Corsair Force GT & GS SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Force G*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Crucial M4 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "M4-CT???M4SSD2*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Crucial M500 SSDs MU07 firmware * NCQ Trim works */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*M500*", "MU07" }, /*quirks*/0 }, { /* * Crucial M500 SSDs all other firmware * NCQ Trim doesn't work */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*M500*", "*" }, /*quirks*/ADA_Q_NCQ_TRIM_BROKEN }, { /* * Crucial M550 SSDs * NCQ Trim doesn't work, but only on MU01 firmware */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*M550*", "MU01" }, /*quirks*/ADA_Q_NCQ_TRIM_BROKEN }, { /* * Crucial MX100 SSDs * NCQ Trim doesn't work, but only on MU01 firmware */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Crucial CT*MX100*", "MU01" }, /*quirks*/ADA_Q_NCQ_TRIM_BROKEN }, { /* * Crucial RealSSD C300 SSDs * 4k optimised */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "C300-CTFDDAC???MAG*", "*" }, /*quirks*/ADA_Q_4K }, { /* * FCCT M500 SSDs * NCQ Trim doesn't work */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "FCCT*M500*", "*" }, /*quirks*/ADA_Q_NCQ_TRIM_BROKEN }, { /* * Intel 320 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSA2CW*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Intel 330 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2CT*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Intel 510 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2MH*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Intel 520 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2BW*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Intel S3610 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSC2BX*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Intel X25-M Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "INTEL SSDSA2M*", "*" }, /*quirks*/ADA_Q_4K }, { /* * KingDian S200 60GB P0921B * Trimming crash the SSD */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "KingDian S200 *", "*" }, /*quirks*/ADA_Q_NO_TRIM }, { /* * Kingston E100 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "KINGSTON SE100S3*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Kingston HyperX 3k SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "KINGSTON SH103S3*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Marvell SSDs (entry taken from OpenSolaris) * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "MARVELL SD88SA02*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Micron M500 SSDs firmware MU07 * NCQ Trim works? */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron M500*", "MU07" }, /*quirks*/0 }, { /* * Micron M500 SSDs all other firmware * NCQ Trim doesn't work */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron M500*", "*" }, /*quirks*/ADA_Q_NCQ_TRIM_BROKEN }, { /* * Micron M5[15]0 SSDs * NCQ Trim doesn't work, but only MU01 firmware */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron M5[15]0*", "MU01" }, /*quirks*/ADA_Q_NCQ_TRIM_BROKEN }, { /* * Micron 5100 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Micron 5100 MTFDDAK*", "*" }, /*quirks*/ADA_Q_4K }, { /* * OCZ Agility 2 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-AGILITY2*", "*" }, /*quirks*/ADA_Q_4K }, { /* * OCZ Agility 3 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-AGILITY3*", "*" }, /*quirks*/ADA_Q_4K }, { /* * OCZ Deneva R Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "DENRSTE251M45*", "*" }, /*quirks*/ADA_Q_4K }, { /* * OCZ Vertex 2 SSDs (inc pro series) * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ?VERTEX2*", "*" }, /*quirks*/ADA_Q_4K }, { /* * OCZ Vertex 3 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-VERTEX3*", "*" }, /*quirks*/ADA_Q_4K }, { /* * OCZ Vertex 4 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-VERTEX4*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Samsung 750 SSDs * 4k optimised, NCQ TRIM seems to work */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 750*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Samsung 830 Series SSDs * 4k optimised, NCQ TRIM Broken (normal TRIM is fine) */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG SSD 830 Series*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * Samsung 840 SSDs * 4k optimised, NCQ TRIM Broken (normal TRIM is fine) */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 840*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * Samsung 845 SSDs * 4k optimised, NCQ TRIM Broken (normal TRIM is fine) */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 845*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * Samsung 850 SSDs * 4k optimised, NCQ TRIM broken (normal TRIM fine) */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Samsung SSD 850*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * Samsung SM863 Series SSDs (MZ7KM*) * 4k optimised, NCQ believed to be working */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG MZ7KM*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Samsung 843T Series SSDs (MZ7WD*) * Samsung PM851 Series SSDs (MZ7TE*) * Samsung PM853T Series SSDs (MZ7GE*) * 4k optimised, NCQ believed to be broken since these are * appear to be built with the same controllers as the 840/850. */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG MZ7*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * Same as for SAMSUNG MZ7* but enable the quirks for SSD * starting with MZ7* too */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "MZ7*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * Samsung PM851 Series SSDs Dell OEM * device model "SAMSUNG SSD PM851 mSATA 256GB" * 4k optimised, NCQ broken */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG SSD PM851*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* * SuperTalent TeraDrive CT SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "FTM??CT25H*", "*" }, /*quirks*/ADA_Q_4K }, { /* * XceedIOPS SATA SSDs * 4k optimised */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SG9XCS2D*", "*" }, /*quirks*/ADA_Q_4K }, { /* * Samsung drive that doesn't support READ LOG EXT or * READ LOG DMA EXT, despite reporting that it does in * ATA identify data: * SAMSUNG HD200HJ KF100-06 */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD200*", "*" }, /*quirks*/ADA_Q_LOG_BROKEN }, { /* * Samsung drive that doesn't support READ LOG EXT or * READ LOG DMA EXT, despite reporting that it does in * ATA identify data: * SAMSUNG HD501LJ CR100-10 */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "SAMSUNG HD501*", "*" }, /*quirks*/ADA_Q_LOG_BROKEN }, { /* * Seagate Lamarr 8TB Shingled Magnetic Recording (SMR) * Drive Managed SATA hard drive. This drive doesn't report * in firmware that it is a drive managed SMR drive. */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "ST8000AS000[23]*", "*" }, /*quirks*/ADA_Q_SMR_DM }, { /* WD Green SSD */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "WDC WDS?????G0*", "*" }, /*quirks*/ADA_Q_4K | ADA_Q_NCQ_TRIM_BROKEN }, { /* Default */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, /*vendor*/"*", /*product*/"*", /*revision*/"*" }, /*quirks*/0 }, }; static disk_strategy_t adastrategy; static dumper_t adadump; static periph_init_t adainit; static void adadiskgonecb(struct disk *dp); static periph_oninv_t adaoninvalidate; static periph_dtor_t adacleanup; static void adaasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg); static int adabitsysctl(SYSCTL_HANDLER_ARGS); static int adaflagssysctl(SYSCTL_HANDLER_ARGS); static int adazonesupsysctl(SYSCTL_HANDLER_ARGS); static void adasysctlinit(void *context, int pending); static int adagetattr(struct bio *bp); static void adasetflags(struct ada_softc *softc, struct ccb_getdev *cgd); static void adasetgeom(struct ada_softc *softc, struct ccb_getdev *cgd); static periph_ctor_t adaregister; static void ada_dsmtrim(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio); static void ada_cfaerase(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio); static int ada_zone_bio_to_ata(int disk_zone_cmd); static int ada_zone_cmd(struct cam_periph *periph, union ccb *ccb, struct bio *bp, int *queue_ccb); static periph_start_t adastart; static void adaprobedone(struct cam_periph *periph, union ccb *ccb); static void adazonedone(struct cam_periph *periph, union ccb *ccb); static void adadone(struct cam_periph *periph, union ccb *done_ccb); static int adaerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags); static callout_func_t adasendorderedtag; static void adashutdown(void *arg, int howto); static void adasuspend(void *arg); static void adaresume(void *arg); #ifndef ADA_DEFAULT_TIMEOUT #define ADA_DEFAULT_TIMEOUT 30 /* Timeout in seconds */ #endif #ifndef ADA_DEFAULT_RETRY #define ADA_DEFAULT_RETRY 4 #endif #ifndef ADA_DEFAULT_SEND_ORDERED #define ADA_DEFAULT_SEND_ORDERED 1 #endif #ifndef ADA_DEFAULT_SPINDOWN_SHUTDOWN #define ADA_DEFAULT_SPINDOWN_SHUTDOWN 1 #endif #ifndef ADA_DEFAULT_SPINDOWN_SUSPEND #define ADA_DEFAULT_SPINDOWN_SUSPEND 1 #endif #ifndef ADA_DEFAULT_READ_AHEAD #define ADA_DEFAULT_READ_AHEAD 1 #endif #ifndef ADA_DEFAULT_WRITE_CACHE #define ADA_DEFAULT_WRITE_CACHE 1 #endif #define ADA_RA (softc->read_ahead >= 0 ? \ softc->read_ahead : ada_read_ahead) #define ADA_WC (softc->write_cache >= 0 ? \ softc->write_cache : ada_write_cache) static int ada_retry_count = ADA_DEFAULT_RETRY; static int ada_default_timeout = ADA_DEFAULT_TIMEOUT; static int ada_send_ordered = ADA_DEFAULT_SEND_ORDERED; static int ada_spindown_shutdown = ADA_DEFAULT_SPINDOWN_SHUTDOWN; static int ada_spindown_suspend = ADA_DEFAULT_SPINDOWN_SUSPEND; static int ada_read_ahead = ADA_DEFAULT_READ_AHEAD; static int ada_write_cache = ADA_DEFAULT_WRITE_CACHE; static int ada_enable_biospeedup = 1; +static int ada_enable_uma_ccbs = 0; static SYSCTL_NODE(_kern_cam, OID_AUTO, ada, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "CAM Direct Access Disk driver"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, retry_count, CTLFLAG_RWTUN, &ada_retry_count, 0, "Normal I/O retry count"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, default_timeout, CTLFLAG_RWTUN, &ada_default_timeout, 0, "Normal I/O timeout (in seconds)"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, send_ordered, CTLFLAG_RWTUN, &ada_send_ordered, 0, "Send Ordered Tags"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, spindown_shutdown, CTLFLAG_RWTUN, &ada_spindown_shutdown, 0, "Spin down upon shutdown"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, spindown_suspend, CTLFLAG_RWTUN, &ada_spindown_suspend, 0, "Spin down upon suspend"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, read_ahead, CTLFLAG_RWTUN, &ada_read_ahead, 0, "Enable disk read-ahead"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, write_cache, CTLFLAG_RWTUN, &ada_write_cache, 0, "Enable disk write cache"); SYSCTL_INT(_kern_cam_ada, OID_AUTO, enable_biospeedup, CTLFLAG_RDTUN, &ada_enable_biospeedup, 0, "Enable BIO_SPEEDUP processing"); +SYSCTL_INT(_kern_cam_ada, OID_AUTO, enable_uma_ccbs, CTLFLAG_RWTUN, + &ada_enable_uma_ccbs, 0, "Use UMA for CCBs"); /* * ADA_ORDEREDTAG_INTERVAL determines how often, relative * to the default timeout, we check to see whether an ordered * tagged transaction is appropriate to prevent simple tag * starvation. Since we'd like to ensure that there is at least * 1/2 of the timeout length left for a starved transaction to * complete after we've sent an ordered tag, we must poll at least * four times in every timeout period. This takes care of the worst * case where a starved transaction starts during an interval that * meets the requirement "don't send an ordered tag" test so it takes * us two intervals to determine that a tag must be sent. */ #ifndef ADA_ORDEREDTAG_INTERVAL #define ADA_ORDEREDTAG_INTERVAL 4 #endif static struct periph_driver adadriver = { adainit, "ada", TAILQ_HEAD_INITIALIZER(adadriver.units), /* generation */ 0 }; static int adadeletemethodsysctl(SYSCTL_HANDLER_ARGS); PERIPHDRIVER_DECLARE(ada, adadriver); static MALLOC_DEFINE(M_ATADA, "ata_da", "ata_da buffers"); static int adaopen(struct disk *dp) { struct cam_periph *periph; struct ada_softc *softc; int error; periph = (struct cam_periph *)dp->d_drv1; if (cam_periph_acquire(periph) != 0) { return(ENXIO); } cam_periph_lock(periph); if ((error = cam_periph_hold(periph, PRIBIO|PCATCH)) != 0) { cam_periph_unlock(periph); cam_periph_release(periph); return (error); } CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH, ("adaopen\n")); softc = (struct ada_softc *)periph->softc; softc->flags |= ADA_FLAG_OPEN; cam_periph_unhold(periph); cam_periph_unlock(periph); return (0); } static int adaclose(struct disk *dp) { struct cam_periph *periph; struct ada_softc *softc; union ccb *ccb; int error; periph = (struct cam_periph *)dp->d_drv1; softc = (struct ada_softc *)periph->softc; cam_periph_lock(periph); CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH, ("adaclose\n")); /* We only sync the cache if the drive is capable of it. */ if ((softc->flags & ADA_FLAG_DIRTY) != 0 && (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) != 0 && (periph->flags & CAM_PERIPH_INVALID) == 0 && cam_periph_hold(periph, PRIBIO) == 0) { ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); cam_fill_ataio(&ccb->ataio, 1, NULL, CAM_DIR_NONE, 0, NULL, 0, ada_default_timeout*1000); if (softc->flags & ADA_FLAG_CAN_48BIT) ata_48bit_cmd(&ccb->ataio, ATA_FLUSHCACHE48, 0, 0, 0); else ata_28bit_cmd(&ccb->ataio, ATA_FLUSHCACHE, 0, 0, 0); error = cam_periph_runccb(ccb, adaerror, /*cam_flags*/0, /*sense_flags*/0, softc->disk->d_devstat); if (error != 0) xpt_print(periph->path, "Synchronize cache failed\n"); softc->flags &= ~ADA_FLAG_DIRTY; xpt_release_ccb(ccb); cam_periph_unhold(periph); } softc->flags &= ~ADA_FLAG_OPEN; while (softc->refcount != 0) cam_periph_sleep(periph, &softc->refcount, PRIBIO, "adaclose", 1); cam_periph_unlock(periph); cam_periph_release(periph); return (0); } static void adaschedule(struct cam_periph *periph) { struct ada_softc *softc = (struct ada_softc *)periph->softc; if (softc->state != ADA_STATE_NORMAL) return; cam_iosched_schedule(softc->cam_iosched, periph); } /* * Actually translate the requested transfer into one the physical driver * can understand. The transfer is described by a buf and will include * only one physical transfer. */ static void adastrategy(struct bio *bp) { struct cam_periph *periph; struct ada_softc *softc; periph = (struct cam_periph *)bp->bio_disk->d_drv1; softc = (struct ada_softc *)periph->softc; cam_periph_lock(periph); CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("adastrategy(%p)\n", bp)); /* * If the device has been made invalid, error out */ if ((periph->flags & CAM_PERIPH_INVALID) != 0) { cam_periph_unlock(periph); biofinish(bp, NULL, ENXIO); return; } /* * Zone commands must be ordered, because they can depend on the * effects of previously issued commands, and they may affect * commands after them. */ if (bp->bio_cmd == BIO_ZONE) bp->bio_flags |= BIO_ORDERED; /* * Place it in the queue of disk activities for this disk */ cam_iosched_queue_work(softc->cam_iosched, bp); /* * Schedule ourselves for performing the work. */ adaschedule(periph); cam_periph_unlock(periph); return; } static int adadump(void *arg, void *virtual, vm_offset_t physical, off_t offset, size_t length) { struct cam_periph *periph; struct ada_softc *softc; u_int secsize; struct ccb_ataio ataio; struct disk *dp; uint64_t lba; uint16_t count; int error = 0; dp = arg; periph = dp->d_drv1; softc = (struct ada_softc *)periph->softc; secsize = softc->params.secsize; lba = offset / secsize; count = length / secsize; if ((periph->flags & CAM_PERIPH_INVALID) != 0) return (ENXIO); memset(&ataio, 0, sizeof(ataio)); if (length > 0) { xpt_setup_ccb(&ataio.ccb_h, periph->path, CAM_PRIORITY_NORMAL); ataio.ccb_h.ccb_state = ADA_CCB_DUMP; cam_fill_ataio(&ataio, 0, NULL, CAM_DIR_OUT, 0, (u_int8_t *) virtual, length, ada_default_timeout*1000); if ((softc->flags & ADA_FLAG_CAN_48BIT) && (lba + count >= ATA_MAX_28BIT_LBA || count >= 256)) { ata_48bit_cmd(&ataio, ATA_WRITE_DMA48, 0, lba, count); } else { ata_28bit_cmd(&ataio, ATA_WRITE_DMA, 0, lba, count); } error = cam_periph_runccb((union ccb *)&ataio, adaerror, 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL); if (error != 0) printf("Aborting dump due to I/O error.\n"); return (error); } if (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) { xpt_setup_ccb(&ataio.ccb_h, periph->path, CAM_PRIORITY_NORMAL); /* * Tell the drive to flush its internal cache. if we * can't flush in 5s we have big problems. No need to * wait the default 60s to detect problems. */ ataio.ccb_h.ccb_state = ADA_CCB_DUMP; cam_fill_ataio(&ataio, 0, NULL, CAM_DIR_NONE, 0, NULL, 0, 5*1000); if (softc->flags & ADA_FLAG_CAN_48BIT) ata_48bit_cmd(&ataio, ATA_FLUSHCACHE48, 0, 0, 0); else ata_28bit_cmd(&ataio, ATA_FLUSHCACHE, 0, 0, 0); error = cam_periph_runccb((union ccb *)&ataio, adaerror, 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL); if (error != 0) xpt_print(periph->path, "Synchronize cache failed\n"); } return (error); } static void adainit(void) { cam_status status; + ada_ccb_zone = uma_zcreate("ada_ccb", + sizeof(struct ccb_ataio), NULL, NULL, NULL, NULL, + UMA_ALIGN_PTR, 0); + /* * Install a global async callback. This callback will * receive async callbacks like "new device found". */ status = xpt_register_async(AC_FOUND_DEVICE, adaasync, NULL, NULL); if (status != CAM_REQ_CMP) { printf("ada: Failed to attach master async callback " "due to status 0x%x!\n", status); } else if (ada_send_ordered) { /* Register our event handlers */ if ((EVENTHANDLER_REGISTER(power_suspend, adasuspend, NULL, EVENTHANDLER_PRI_LAST)) == NULL) printf("adainit: power event registration failed!\n"); if ((EVENTHANDLER_REGISTER(power_resume, adaresume, NULL, EVENTHANDLER_PRI_LAST)) == NULL) printf("adainit: power event registration failed!\n"); if ((EVENTHANDLER_REGISTER(shutdown_post_sync, adashutdown, NULL, SHUTDOWN_PRI_DEFAULT)) == NULL) printf("adainit: shutdown event registration failed!\n"); } } /* * Callback from GEOM, called when it has finished cleaning up its * resources. */ static void adadiskgonecb(struct disk *dp) { struct cam_periph *periph; periph = (struct cam_periph *)dp->d_drv1; cam_periph_release(periph); } static void adaoninvalidate(struct cam_periph *periph) { struct ada_softc *softc; softc = (struct ada_softc *)periph->softc; /* * De-register any async callbacks. */ xpt_register_async(0, adaasync, periph, periph->path); #ifdef CAM_IO_STATS softc->invalidations++; #endif /* * Return all queued I/O with ENXIO. * XXX Handle any transactions queued to the card * with XPT_ABORT_CCB. */ cam_iosched_flush(softc->cam_iosched, NULL, ENXIO); disk_gone(softc->disk); } static void adacleanup(struct cam_periph *periph) { struct ada_softc *softc; softc = (struct ada_softc *)periph->softc; cam_periph_unlock(periph); cam_iosched_fini(softc->cam_iosched); /* * If we can't free the sysctl tree, oh well... */ if ((softc->flags & ADA_FLAG_SCTX_INIT) != 0) { #ifdef CAM_IO_STATS if (sysctl_ctx_free(&softc->sysctl_stats_ctx) != 0) xpt_print(periph->path, "can't remove sysctl stats context\n"); #endif if (sysctl_ctx_free(&softc->sysctl_ctx) != 0) xpt_print(periph->path, "can't remove sysctl context\n"); } disk_destroy(softc->disk); callout_drain(&softc->sendordered_c); free(softc, M_DEVBUF); cam_periph_lock(periph); } static void adasetdeletemethod(struct ada_softc *softc) { if (softc->flags & ADA_FLAG_CAN_NCQ_TRIM) softc->delete_method = ADA_DELETE_NCQ_DSM_TRIM; else if (softc->flags & ADA_FLAG_CAN_TRIM) softc->delete_method = ADA_DELETE_DSM_TRIM; else if ((softc->flags & ADA_FLAG_CAN_CFA) && !(softc->flags & ADA_FLAG_CAN_48BIT)) softc->delete_method = ADA_DELETE_CFA_ERASE; else softc->delete_method = ADA_DELETE_NONE; } static void adaasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg) { struct ccb_getdev cgd; struct cam_periph *periph; struct ada_softc *softc; periph = (struct cam_periph *)callback_arg; switch (code) { case AC_FOUND_DEVICE: { struct ccb_getdev *cgd; cam_status status; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) break; if (cgd->protocol != PROTO_ATA) break; /* * Allocate a peripheral instance for * this device and start the probe * process. */ status = cam_periph_alloc(adaregister, adaoninvalidate, adacleanup, adastart, "ada", CAM_PERIPH_BIO, path, adaasync, AC_FOUND_DEVICE, cgd); if (status != CAM_REQ_CMP && status != CAM_REQ_INPROG) printf("adaasync: Unable to attach to new device " "due to status 0x%x\n", status); break; } case AC_GETDEV_CHANGED: { softc = (struct ada_softc *)periph->softc; memset(&cgd, 0, sizeof(cgd)); xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); /* * Update our information based on the new Identify data. */ adasetflags(softc, &cgd); adasetgeom(softc, &cgd); disk_resize(softc->disk, M_NOWAIT); cam_periph_async(periph, code, path, arg); break; } case AC_ADVINFO_CHANGED: { uintptr_t buftype; buftype = (uintptr_t)arg; if (buftype == CDAI_TYPE_PHYS_PATH) { struct ada_softc *softc; softc = periph->softc; disk_attr_changed(softc->disk, "GEOM::physpath", M_NOWAIT); } break; } case AC_SENT_BDR: case AC_BUS_RESET: { softc = (struct ada_softc *)periph->softc; cam_periph_async(periph, code, path, arg); if (softc->state != ADA_STATE_NORMAL) break; memset(&cgd, 0, sizeof(cgd)); xpt_setup_ccb(&cgd.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); if (ADA_RA >= 0 && softc->flags & ADA_FLAG_CAN_RAHEAD) softc->state = ADA_STATE_RAHEAD; else if (ADA_WC >= 0 && softc->flags & ADA_FLAG_CAN_WCACHE) softc->state = ADA_STATE_WCACHE; else if ((softc->flags & ADA_FLAG_CAN_LOG) && (softc->zone_mode != ADA_ZONE_NONE)) softc->state = ADA_STATE_LOGDIR; else break; if (cam_periph_acquire(periph) != 0) softc->state = ADA_STATE_NORMAL; else xpt_schedule(periph, CAM_PRIORITY_DEV); } default: cam_periph_async(periph, code, path, arg); break; } } static int adazonemodesysctl(SYSCTL_HANDLER_ARGS) { char tmpbuf[40]; struct ada_softc *softc; int error; softc = (struct ada_softc *)arg1; switch (softc->zone_mode) { case ADA_ZONE_DRIVE_MANAGED: snprintf(tmpbuf, sizeof(tmpbuf), "Drive Managed"); break; case ADA_ZONE_HOST_AWARE: snprintf(tmpbuf, sizeof(tmpbuf), "Host Aware"); break; case ADA_ZONE_HOST_MANAGED: snprintf(tmpbuf, sizeof(tmpbuf), "Host Managed"); break; case ADA_ZONE_NONE: default: snprintf(tmpbuf, sizeof(tmpbuf), "Not Zoned"); break; } error = sysctl_handle_string(oidp, tmpbuf, sizeof(tmpbuf), req); return (error); } static int adazonesupsysctl(SYSCTL_HANDLER_ARGS) { char tmpbuf[180]; struct ada_softc *softc; struct sbuf sb; int error, first; unsigned int i; softc = (struct ada_softc *)arg1; error = 0; first = 1; sbuf_new(&sb, tmpbuf, sizeof(tmpbuf), 0); for (i = 0; i < sizeof(ada_zone_desc_table) / sizeof(ada_zone_desc_table[0]); i++) { if (softc->zone_flags & ada_zone_desc_table[i].value) { if (first == 0) sbuf_printf(&sb, ", "); else first = 0; sbuf_cat(&sb, ada_zone_desc_table[i].desc); } } if (first == 1) sbuf_printf(&sb, "None"); sbuf_finish(&sb); error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req); return (error); } static void adasysctlinit(void *context, int pending) { struct cam_periph *periph; struct ada_softc *softc; char tmpstr[32], tmpstr2[16]; periph = (struct cam_periph *)context; /* periph was held for us when this task was enqueued */ if ((periph->flags & CAM_PERIPH_INVALID) != 0) { cam_periph_release(periph); return; } softc = (struct ada_softc *)periph->softc; snprintf(tmpstr, sizeof(tmpstr), "CAM ADA unit %d",periph->unit_number); snprintf(tmpstr2, sizeof(tmpstr2), "%d", periph->unit_number); sysctl_ctx_init(&softc->sysctl_ctx); softc->flags |= ADA_FLAG_SCTX_INIT; softc->sysctl_tree = SYSCTL_ADD_NODE_WITH_LABEL(&softc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_kern_cam_ada), OID_AUTO, tmpstr2, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, tmpstr, "device_index"); if (softc->sysctl_tree == NULL) { printf("adasysctlinit: unable to allocate sysctl tree\n"); cam_periph_release(periph); return; } SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "delete_method", CTLTYPE_STRING | CTLFLAG_RW | CTLFLAG_NEEDGIANT, softc, 0, adadeletemethodsysctl, "A", "BIO_DELETE execution method"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "trim_count", CTLFLAG_RD, &softc->trim_count, "Total number of dsm commands sent"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "trim_ranges", CTLFLAG_RD, &softc->trim_ranges, "Total number of ranges in dsm commands"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "trim_lbas", CTLFLAG_RD, &softc->trim_lbas, "Total lbas in the dsm commands sent"); SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "read_ahead", CTLFLAG_RW | CTLFLAG_MPSAFE, &softc->read_ahead, 0, "Enable disk read ahead."); SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "write_cache", CTLFLAG_RW | CTLFLAG_MPSAFE, &softc->write_cache, 0, "Enable disk write cache."); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "zone_mode", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, softc, 0, adazonemodesysctl, "A", "Zone Mode"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "zone_support", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, softc, 0, adazonesupsysctl, "A", "Zone Support"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "optimal_seq_zones", CTLFLAG_RD, &softc->optimal_seq_zones, "Optimal Number of Open Sequential Write Preferred Zones"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "optimal_nonseq_zones", CTLFLAG_RD, &softc->optimal_nonseq_zones, "Optimal Number of Non-Sequentially Written Sequential Write " "Preferred Zones"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "max_seq_zones", CTLFLAG_RD, &softc->max_seq_zones, "Maximum Number of Open Sequential Write Required Zones"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "flags", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, softc, 0, adaflagssysctl, "A", "Flags for drive"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "unmapped_io", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->flags, (u_int)ADA_FLAG_UNMAPPEDIO, adabitsysctl, "I", "Unmapped I/O support *DEPRECATED* gone in FreeBSD 14"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "rotating", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->flags, (u_int)ADA_FLAG_ROTATING, adabitsysctl, "I", "Rotating media *DEPRECATED* gone in FreeBSD 14"); #ifdef CAM_TEST_FAILURE /* * Add a 'door bell' sysctl which allows one to set it from userland * and cause something bad to happen. For the moment, we only allow * whacking the next read or write. */ SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "force_read_error", CTLFLAG_RW | CTLFLAG_MPSAFE, &softc->force_read_error, 0, "Force a read error for the next N reads."); SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "force_write_error", CTLFLAG_RW | CTLFLAG_MPSAFE, &softc->force_write_error, 0, "Force a write error for the next N writes."); SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "periodic_read_error", CTLFLAG_RW | CTLFLAG_MPSAFE, &softc->periodic_read_error, 0, "Force a read error every N reads (don't set too low)."); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "invalidate", CTLTYPE_U64 | CTLFLAG_RW | CTLFLAG_MPSAFE, periph, 0, cam_periph_invalidate_sysctl, "I", "Write 1 to invalidate the drive immediately"); #endif #ifdef CAM_IO_STATS softc->sysctl_stats_tree = SYSCTL_ADD_NODE(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "stats", CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "Statistics"); SYSCTL_ADD_INT(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_stats_tree), OID_AUTO, "timeouts", CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->timeouts, 0, "Device timeouts reported by the SIM"); SYSCTL_ADD_INT(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_stats_tree), OID_AUTO, "errors", CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->errors, 0, "Transport errors reported by the SIM."); SYSCTL_ADD_INT(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_stats_tree), OID_AUTO, "pack_invalidations", CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->invalidations, 0, "Device pack invalidations."); #endif cam_iosched_sysctl_init(softc->cam_iosched, &softc->sysctl_ctx, softc->sysctl_tree); cam_periph_release(periph); } static int adagetattr(struct bio *bp) { int ret; struct cam_periph *periph; if (g_handleattr_int(bp, "GEOM::canspeedup", ada_enable_biospeedup)) return (EJUSTRETURN); periph = (struct cam_periph *)bp->bio_disk->d_drv1; cam_periph_lock(periph); ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute, periph->path); cam_periph_unlock(periph); if (ret == 0) bp->bio_completed = bp->bio_length; return ret; } static int adadeletemethodsysctl(SYSCTL_HANDLER_ARGS) { char buf[16]; const char *p; struct ada_softc *softc; int i, error, value, methods; softc = (struct ada_softc *)arg1; value = softc->delete_method; if (value < 0 || value > ADA_DELETE_MAX) p = "UNKNOWN"; else p = ada_delete_method_names[value]; strncpy(buf, p, sizeof(buf)); error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); methods = 1 << ADA_DELETE_DISABLE; if ((softc->flags & ADA_FLAG_CAN_CFA) && !(softc->flags & ADA_FLAG_CAN_48BIT)) methods |= 1 << ADA_DELETE_CFA_ERASE; if (softc->flags & ADA_FLAG_CAN_TRIM) methods |= 1 << ADA_DELETE_DSM_TRIM; if (softc->flags & ADA_FLAG_CAN_NCQ_TRIM) methods |= 1 << ADA_DELETE_NCQ_DSM_TRIM; for (i = 0; i <= ADA_DELETE_MAX; i++) { if (!(methods & (1 << i)) || strcmp(buf, ada_delete_method_names[i]) != 0) continue; softc->delete_method = i; return (0); } return (EINVAL); } static int adabitsysctl(SYSCTL_HANDLER_ARGS) { u_int *flags = arg1; u_int test = arg2; int tmpout, error; tmpout = !!(*flags & test); error = SYSCTL_OUT(req, &tmpout, sizeof(tmpout)); if (error || !req->newptr) return (error); return (EPERM); } static int adaflagssysctl(SYSCTL_HANDLER_ARGS) { struct sbuf sbuf; struct ada_softc *softc = arg1; int error; sbuf_new_for_sysctl(&sbuf, NULL, 0, req); if (softc->flags != 0) sbuf_printf(&sbuf, "0x%b", (unsigned)softc->flags, ADA_FLAG_STRING); else sbuf_printf(&sbuf, "0"); error = sbuf_finish(&sbuf); sbuf_delete(&sbuf); return (error); } static void adasetflags(struct ada_softc *softc, struct ccb_getdev *cgd) { if ((cgd->ident_data.capabilities1 & ATA_SUPPORT_DMA) && (cgd->inq_flags & SID_DMA)) softc->flags |= ADA_FLAG_CAN_DMA; else softc->flags &= ~ADA_FLAG_CAN_DMA; if (cgd->ident_data.support.command2 & ATA_SUPPORT_ADDRESS48) { softc->flags |= ADA_FLAG_CAN_48BIT; if (cgd->inq_flags & SID_DMA48) softc->flags |= ADA_FLAG_CAN_DMA48; else softc->flags &= ~ADA_FLAG_CAN_DMA48; } else softc->flags &= ~(ADA_FLAG_CAN_48BIT | ADA_FLAG_CAN_DMA48); if (cgd->ident_data.support.command2 & ATA_SUPPORT_FLUSHCACHE) softc->flags |= ADA_FLAG_CAN_FLUSHCACHE; else softc->flags &= ~ADA_FLAG_CAN_FLUSHCACHE; if (cgd->ident_data.support.command1 & ATA_SUPPORT_POWERMGT) softc->flags |= ADA_FLAG_CAN_POWERMGT; else softc->flags &= ~ADA_FLAG_CAN_POWERMGT; if ((cgd->ident_data.satacapabilities & ATA_SUPPORT_NCQ) && (cgd->inq_flags & SID_DMA) && (cgd->inq_flags & SID_CmdQue)) softc->flags |= ADA_FLAG_CAN_NCQ; else softc->flags &= ~ADA_FLAG_CAN_NCQ; if ((cgd->ident_data.support_dsm & ATA_SUPPORT_DSM_TRIM) && (cgd->inq_flags & SID_DMA) && (softc->quirks & ADA_Q_NO_TRIM) == 0) { softc->flags |= ADA_FLAG_CAN_TRIM; softc->trim_max_ranges = TRIM_MAX_RANGES; if (cgd->ident_data.max_dsm_blocks != 0) { softc->trim_max_ranges = min(cgd->ident_data.max_dsm_blocks * ATA_DSM_BLK_RANGES, softc->trim_max_ranges); } /* * If we can do RCVSND_FPDMA_QUEUED commands, we may be able * to do NCQ trims, if we support trims at all. We also need * support from the SIM to do things properly. Perhaps we * should look at log 13 dword 0 bit 0 and dword 1 bit 0 are * set too... */ if ((softc->quirks & ADA_Q_NCQ_TRIM_BROKEN) == 0 && (softc->flags & ADA_FLAG_PIM_ATA_EXT) != 0 && (cgd->ident_data.satacapabilities2 & ATA_SUPPORT_RCVSND_FPDMA_QUEUED) != 0 && (softc->flags & ADA_FLAG_CAN_TRIM) != 0) softc->flags |= ADA_FLAG_CAN_NCQ_TRIM; else softc->flags &= ~ADA_FLAG_CAN_NCQ_TRIM; } else softc->flags &= ~(ADA_FLAG_CAN_TRIM | ADA_FLAG_CAN_NCQ_TRIM); if (cgd->ident_data.support.command2 & ATA_SUPPORT_CFA) softc->flags |= ADA_FLAG_CAN_CFA; else softc->flags &= ~ADA_FLAG_CAN_CFA; /* * Now that we've set the appropriate flags, setup the delete * method. */ adasetdeletemethod(softc); if ((cgd->ident_data.support.extension & ATA_SUPPORT_GENLOG) && ((softc->quirks & ADA_Q_LOG_BROKEN) == 0)) softc->flags |= ADA_FLAG_CAN_LOG; else softc->flags &= ~ADA_FLAG_CAN_LOG; if ((cgd->ident_data.support3 & ATA_SUPPORT_ZONE_MASK) == ATA_SUPPORT_ZONE_HOST_AWARE) softc->zone_mode = ADA_ZONE_HOST_AWARE; else if (((cgd->ident_data.support3 & ATA_SUPPORT_ZONE_MASK) == ATA_SUPPORT_ZONE_DEV_MANAGED) || (softc->quirks & ADA_Q_SMR_DM)) softc->zone_mode = ADA_ZONE_DRIVE_MANAGED; else softc->zone_mode = ADA_ZONE_NONE; if (cgd->ident_data.support.command1 & ATA_SUPPORT_LOOKAHEAD) softc->flags |= ADA_FLAG_CAN_RAHEAD; else softc->flags &= ~ADA_FLAG_CAN_RAHEAD; if (cgd->ident_data.support.command1 & ATA_SUPPORT_WRITECACHE) softc->flags |= ADA_FLAG_CAN_WCACHE; else softc->flags &= ~ADA_FLAG_CAN_WCACHE; } static cam_status adaregister(struct cam_periph *periph, void *arg) { struct ada_softc *softc; struct ccb_getdev *cgd; struct disk_params *dp; struct sbuf sb; char *announce_buf; caddr_t match; int quirks; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) { printf("adaregister: no getdev CCB, can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (struct ada_softc *)malloc(sizeof(*softc), M_DEVBUF, M_NOWAIT|M_ZERO); if (softc == NULL) { printf("adaregister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } announce_buf = softc->announce_temp; bzero(announce_buf, ADA_ANNOUNCETMP_SZ); if (cam_iosched_init(&softc->cam_iosched, periph) != 0) { printf("adaregister: Unable to probe new device. " "Unable to allocate iosched memory\n"); free(softc, M_DEVBUF); return(CAM_REQ_CMP_ERR); } periph->softc = softc; xpt_path_inq(&softc->cpi, periph->path); /* * See if this device has any quirks. */ match = cam_quirkmatch((caddr_t)&cgd->ident_data, (caddr_t)ada_quirk_table, nitems(ada_quirk_table), sizeof(*ada_quirk_table), ata_identify_match); if (match != NULL) softc->quirks = ((struct ada_quirk_entry *)match)->quirks; else softc->quirks = ADA_Q_NONE; TASK_INIT(&softc->sysctl_task, 0, adasysctlinit, periph); /* * Register this media as a disk */ (void)cam_periph_hold(periph, PRIBIO); cam_periph_unlock(periph); snprintf(announce_buf, ADA_ANNOUNCETMP_SZ, "kern.cam.ada.%d.quirks", periph->unit_number); quirks = softc->quirks; TUNABLE_INT_FETCH(announce_buf, &quirks); softc->quirks = quirks; softc->read_ahead = -1; snprintf(announce_buf, ADA_ANNOUNCETMP_SZ, "kern.cam.ada.%d.read_ahead", periph->unit_number); TUNABLE_INT_FETCH(announce_buf, &softc->read_ahead); softc->write_cache = -1; snprintf(announce_buf, ADA_ANNOUNCETMP_SZ, "kern.cam.ada.%d.write_cache", periph->unit_number); TUNABLE_INT_FETCH(announce_buf, &softc->write_cache); + /* + * Let XPT know we can use UMA-allocated CCBs. + */ + if (ada_enable_uma_ccbs) { + KASSERT(ada_ccb_zone != NULL, + ("%s: NULL ada_ccb_zone", __func__)); + periph->ccb_zone = ada_ccb_zone; + } + /* * Set support flags based on the Identify data and quirks. */ adasetflags(softc, cgd); if (softc->cpi.hba_misc & PIM_ATA_EXT) softc->flags |= ADA_FLAG_PIM_ATA_EXT; /* Disable queue sorting for non-rotational media by default. */ if (cgd->ident_data.media_rotation_rate == ATA_RATE_NON_ROTATING) { softc->flags &= ~ADA_FLAG_ROTATING; } else { softc->flags |= ADA_FLAG_ROTATING; } cam_iosched_set_sort_queue(softc->cam_iosched, (softc->flags & ADA_FLAG_ROTATING) ? -1 : 0); softc->disk = disk_alloc(); adasetgeom(softc, cgd); softc->disk->d_devstat = devstat_new_entry(periph->periph_name, periph->unit_number, softc->params.secsize, DEVSTAT_ALL_SUPPORTED, DEVSTAT_TYPE_DIRECT | XPORT_DEVSTAT_TYPE(softc->cpi.transport), DEVSTAT_PRIORITY_DISK); softc->disk->d_open = adaopen; softc->disk->d_close = adaclose; softc->disk->d_strategy = adastrategy; softc->disk->d_getattr = adagetattr; if (cam_sim_pollable(periph->sim)) softc->disk->d_dump = adadump; softc->disk->d_gone = adadiskgonecb; softc->disk->d_name = "ada"; softc->disk->d_drv1 = periph; softc->disk->d_unit = periph->unit_number; /* * Acquire a reference to the periph before we register with GEOM. * We'll release this reference once GEOM calls us back (via * adadiskgonecb()) telling us that our provider has been freed. */ if (cam_periph_acquire(periph) != 0) { xpt_print(periph->path, "%s: lost periph during " "registration!\n", __func__); cam_periph_lock(periph); return (CAM_REQ_CMP_ERR); } disk_create(softc->disk, DISK_VERSION); cam_periph_lock(periph); dp = &softc->params; snprintf(announce_buf, ADA_ANNOUNCETMP_SZ, "%juMB (%ju %u byte sectors)", ((uintmax_t)dp->secsize * dp->sectors) / (1024 * 1024), (uintmax_t)dp->sectors, dp->secsize); sbuf_new(&sb, softc->announce_buffer, ADA_ANNOUNCE_SZ, SBUF_FIXEDLEN); xpt_announce_periph_sbuf(periph, &sb, announce_buf); xpt_announce_quirks_sbuf(periph, &sb, softc->quirks, ADA_Q_BIT_STRING); sbuf_finish(&sb); sbuf_putbuf(&sb); /* * Create our sysctl variables, now that we know * we have successfully attached. */ if (cam_periph_acquire(periph) == 0) taskqueue_enqueue(taskqueue_thread, &softc->sysctl_task); /* * Add async callbacks for bus reset and * bus device reset calls. I don't bother * checking if this fails as, in most cases, * the system will function just fine without * them and the only alternative would be to * not attach the device on failure. */ xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE | AC_GETDEV_CHANGED | AC_ADVINFO_CHANGED, adaasync, periph, periph->path); /* * Schedule a periodic event to occasionally send an * ordered tag to a device. */ callout_init_mtx(&softc->sendordered_c, cam_periph_mtx(periph), 0); callout_reset(&softc->sendordered_c, (ada_default_timeout * hz) / ADA_ORDEREDTAG_INTERVAL, adasendorderedtag, softc); if (ADA_RA >= 0 && softc->flags & ADA_FLAG_CAN_RAHEAD) { softc->state = ADA_STATE_RAHEAD; } else if (ADA_WC >= 0 && softc->flags & ADA_FLAG_CAN_WCACHE) { softc->state = ADA_STATE_WCACHE; } else if ((softc->flags & ADA_FLAG_CAN_LOG) && (softc->zone_mode != ADA_ZONE_NONE)) { softc->state = ADA_STATE_LOGDIR; } else { /* * Nothing to probe, so we can just transition to the * normal state. */ adaprobedone(periph, NULL); return(CAM_REQ_CMP); } xpt_schedule(periph, CAM_PRIORITY_DEV); return(CAM_REQ_CMP); } static int ada_dsmtrim_req_create(struct ada_softc *softc, struct bio *bp, struct trim_request *req) { uint64_t lastlba = (uint64_t)-1, lbas = 0; int c, lastcount = 0, off, ranges = 0; bzero(req, sizeof(*req)); TAILQ_INIT(&req->bps); do { uint64_t lba = bp->bio_pblkno; int count = bp->bio_bcount / softc->params.secsize; /* Try to extend the previous range. */ if (lba == lastlba) { c = min(count, ATA_DSM_RANGE_MAX - lastcount); lastcount += c; off = (ranges - 1) * ATA_DSM_RANGE_SIZE; req->data[off + 6] = lastcount & 0xff; req->data[off + 7] = (lastcount >> 8) & 0xff; count -= c; lba += c; lbas += c; } while (count > 0) { c = min(count, ATA_DSM_RANGE_MAX); off = ranges * ATA_DSM_RANGE_SIZE; req->data[off + 0] = lba & 0xff; req->data[off + 1] = (lba >> 8) & 0xff; req->data[off + 2] = (lba >> 16) & 0xff; req->data[off + 3] = (lba >> 24) & 0xff; req->data[off + 4] = (lba >> 32) & 0xff; req->data[off + 5] = (lba >> 40) & 0xff; req->data[off + 6] = c & 0xff; req->data[off + 7] = (c >> 8) & 0xff; lba += c; lbas += c; count -= c; lastcount = c; ranges++; /* * Its the caller's responsibility to ensure the * request will fit so we don't need to check for * overrun here */ } lastlba = lba; TAILQ_INSERT_TAIL(&req->bps, bp, bio_queue); bp = cam_iosched_next_trim(softc->cam_iosched); if (bp == NULL) break; if (bp->bio_bcount / softc->params.secsize > (softc->trim_max_ranges - ranges) * ATA_DSM_RANGE_MAX) { cam_iosched_put_back_trim(softc->cam_iosched, bp); break; } } while (1); softc->trim_count++; softc->trim_ranges += ranges; softc->trim_lbas += lbas; return (ranges); } static void ada_dsmtrim(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio) { struct trim_request *req = &softc->trim_req; int ranges; ranges = ada_dsmtrim_req_create(softc, bp, req); cam_fill_ataio(ataio, ada_retry_count, adadone, CAM_DIR_OUT, 0, req->data, howmany(ranges, ATA_DSM_BLK_RANGES) * ATA_DSM_BLK_SIZE, ada_default_timeout * 1000); ata_48bit_cmd(ataio, ATA_DATA_SET_MANAGEMENT, ATA_DSM_TRIM, 0, howmany(ranges, ATA_DSM_BLK_RANGES)); } static void ada_ncq_dsmtrim(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio) { struct trim_request *req = &softc->trim_req; int ranges; ranges = ada_dsmtrim_req_create(softc, bp, req); cam_fill_ataio(ataio, ada_retry_count, adadone, CAM_DIR_OUT, 0, req->data, howmany(ranges, ATA_DSM_BLK_RANGES) * ATA_DSM_BLK_SIZE, ada_default_timeout * 1000); ata_ncq_cmd(ataio, ATA_SEND_FPDMA_QUEUED, 0, howmany(ranges, ATA_DSM_BLK_RANGES)); ataio->cmd.sector_count_exp = ATA_SFPDMA_DSM; ataio->ata_flags |= ATA_FLAG_AUX; ataio->aux = 1; } static void ada_cfaerase(struct ada_softc *softc, struct bio *bp, struct ccb_ataio *ataio) { struct trim_request *req = &softc->trim_req; uint64_t lba = bp->bio_pblkno; uint16_t count = bp->bio_bcount / softc->params.secsize; bzero(req, sizeof(*req)); TAILQ_INIT(&req->bps); TAILQ_INSERT_TAIL(&req->bps, bp, bio_queue); cam_fill_ataio(ataio, ada_retry_count, adadone, CAM_DIR_NONE, 0, NULL, 0, ada_default_timeout*1000); if (count >= 256) count = 0; ata_28bit_cmd(ataio, ATA_CFA_ERASE, 0, lba, count); } static int ada_zone_bio_to_ata(int disk_zone_cmd) { switch (disk_zone_cmd) { case DISK_ZONE_OPEN: return ATA_ZM_OPEN_ZONE; case DISK_ZONE_CLOSE: return ATA_ZM_CLOSE_ZONE; case DISK_ZONE_FINISH: return ATA_ZM_FINISH_ZONE; case DISK_ZONE_RWP: return ATA_ZM_RWP; } return -1; } static int ada_zone_cmd(struct cam_periph *periph, union ccb *ccb, struct bio *bp, int *queue_ccb) { struct ada_softc *softc; int error; error = 0; if (bp->bio_cmd != BIO_ZONE) { error = EINVAL; goto bailout; } softc = periph->softc; switch (bp->bio_zone.zone_cmd) { case DISK_ZONE_OPEN: case DISK_ZONE_CLOSE: case DISK_ZONE_FINISH: case DISK_ZONE_RWP: { int zone_flags; int zone_sa; uint64_t lba; zone_sa = ada_zone_bio_to_ata(bp->bio_zone.zone_cmd); if (zone_sa == -1) { xpt_print(periph->path, "Cannot translate zone " "cmd %#x to ATA\n", bp->bio_zone.zone_cmd); error = EINVAL; goto bailout; } zone_flags = 0; lba = bp->bio_zone.zone_params.rwp.id; if (bp->bio_zone.zone_params.rwp.flags & DISK_ZONE_RWP_FLAG_ALL) zone_flags |= ZBC_OUT_ALL; ata_zac_mgmt_out(&ccb->ataio, /*retries*/ ada_retry_count, /*cbfcnp*/ adadone, /*use_ncq*/ (softc->flags & ADA_FLAG_PIM_ATA_EXT) ? 1 : 0, /*zm_action*/ zone_sa, /*zone_id*/ lba, /*zone_flags*/ zone_flags, /*sector_count*/ 0, /*data_ptr*/ NULL, /*dxfer_len*/ 0, /*timeout*/ ada_default_timeout * 1000); *queue_ccb = 1; break; } case DISK_ZONE_REPORT_ZONES: { uint8_t *rz_ptr; uint32_t num_entries, alloc_size; struct disk_zone_report *rep; rep = &bp->bio_zone.zone_params.report; num_entries = rep->entries_allocated; if (num_entries == 0) { xpt_print(periph->path, "No entries allocated for " "Report Zones request\n"); error = EINVAL; goto bailout; } alloc_size = sizeof(struct scsi_report_zones_hdr) + (sizeof(struct scsi_report_zones_desc) * num_entries); alloc_size = min(alloc_size, softc->disk->d_maxsize); rz_ptr = malloc(alloc_size, M_ATADA, M_NOWAIT | M_ZERO); if (rz_ptr == NULL) { xpt_print(periph->path, "Unable to allocate memory " "for Report Zones request\n"); error = ENOMEM; goto bailout; } ata_zac_mgmt_in(&ccb->ataio, /*retries*/ ada_retry_count, /*cbcfnp*/ adadone, /*use_ncq*/ (softc->flags & ADA_FLAG_PIM_ATA_EXT) ? 1 : 0, /*zm_action*/ ATA_ZM_REPORT_ZONES, /*zone_id*/ rep->starting_id, /*zone_flags*/ rep->rep_options, /*data_ptr*/ rz_ptr, /*dxfer_len*/ alloc_size, /*timeout*/ ada_default_timeout * 1000); /* * For BIO_ZONE, this isn't normally needed. However, it * is used by devstat_end_transaction_bio() to determine * how much data was transferred. */ /* * XXX KDM we have a problem. But I'm not sure how to fix * it. devstat uses bio_bcount - bio_resid to calculate * the amount of data transferred. The GEOM disk code * uses bio_length - bio_resid to calculate the amount of * data in bio_completed. We have different structure * sizes above and below the ada(4) driver. So, if we * use the sizes above, the amount transferred won't be * quite accurate for devstat. If we use different sizes * for bio_bcount and bio_length (above and below * respectively), then the residual needs to match one or * the other. Everything is calculated after the bio * leaves the driver, so changing the values around isn't * really an option. For now, just set the count to the * passed in length. This means that the calculations * above (e.g. bio_completed) will be correct, but the * amount of data reported to devstat will be slightly * under or overstated. */ bp->bio_bcount = bp->bio_length; *queue_ccb = 1; break; } case DISK_ZONE_GET_PARAMS: { struct disk_zone_disk_params *params; params = &bp->bio_zone.zone_params.disk_params; bzero(params, sizeof(*params)); switch (softc->zone_mode) { case ADA_ZONE_DRIVE_MANAGED: params->zone_mode = DISK_ZONE_MODE_DRIVE_MANAGED; break; case ADA_ZONE_HOST_AWARE: params->zone_mode = DISK_ZONE_MODE_HOST_AWARE; break; case ADA_ZONE_HOST_MANAGED: params->zone_mode = DISK_ZONE_MODE_HOST_MANAGED; break; default: case ADA_ZONE_NONE: params->zone_mode = DISK_ZONE_MODE_NONE; break; } if (softc->zone_flags & ADA_ZONE_FLAG_URSWRZ) params->flags |= DISK_ZONE_DISK_URSWRZ; if (softc->zone_flags & ADA_ZONE_FLAG_OPT_SEQ_SET) { params->optimal_seq_zones = softc->optimal_seq_zones; params->flags |= DISK_ZONE_OPT_SEQ_SET; } if (softc->zone_flags & ADA_ZONE_FLAG_OPT_NONSEQ_SET) { params->optimal_nonseq_zones = softc->optimal_nonseq_zones; params->flags |= DISK_ZONE_OPT_NONSEQ_SET; } if (softc->zone_flags & ADA_ZONE_FLAG_MAX_SEQ_SET) { params->max_seq_zones = softc->max_seq_zones; params->flags |= DISK_ZONE_MAX_SEQ_SET; } if (softc->zone_flags & ADA_ZONE_FLAG_RZ_SUP) params->flags |= DISK_ZONE_RZ_SUP; if (softc->zone_flags & ADA_ZONE_FLAG_OPEN_SUP) params->flags |= DISK_ZONE_OPEN_SUP; if (softc->zone_flags & ADA_ZONE_FLAG_CLOSE_SUP) params->flags |= DISK_ZONE_CLOSE_SUP; if (softc->zone_flags & ADA_ZONE_FLAG_FINISH_SUP) params->flags |= DISK_ZONE_FINISH_SUP; if (softc->zone_flags & ADA_ZONE_FLAG_RWP_SUP) params->flags |= DISK_ZONE_RWP_SUP; break; } default: break; } bailout: return (error); } static void adastart(struct cam_periph *periph, union ccb *start_ccb) { struct ada_softc *softc = (struct ada_softc *)periph->softc; struct ccb_ataio *ataio = &start_ccb->ataio; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("adastart\n")); switch (softc->state) { case ADA_STATE_NORMAL: { struct bio *bp; u_int8_t tag_code; bp = cam_iosched_next_bio(softc->cam_iosched); if (bp == NULL) { xpt_release_ccb(start_ccb); break; } if ((bp->bio_flags & BIO_ORDERED) != 0 || (bp->bio_cmd != BIO_DELETE && (softc->flags & ADA_FLAG_NEED_OTAG) != 0)) { softc->flags &= ~ADA_FLAG_NEED_OTAG; softc->flags |= ADA_FLAG_WAS_OTAG; tag_code = 0; } else { tag_code = 1; } switch (bp->bio_cmd) { case BIO_WRITE: case BIO_READ: { uint64_t lba = bp->bio_pblkno; uint16_t count = bp->bio_bcount / softc->params.secsize; void *data_ptr; int rw_op; if (bp->bio_cmd == BIO_WRITE) { softc->flags |= ADA_FLAG_DIRTY; rw_op = CAM_DIR_OUT; } else { rw_op = CAM_DIR_IN; } data_ptr = bp->bio_data; if ((bp->bio_flags & (BIO_UNMAPPED|BIO_VLIST)) != 0) { rw_op |= CAM_DATA_BIO; data_ptr = bp; } #ifdef CAM_TEST_FAILURE int fail = 0; /* * Support the failure ioctls. If the command is a * read, and there are pending forced read errors, or * if a write and pending write errors, then fail this * operation with EIO. This is useful for testing * purposes. Also, support having every Nth read fail. * * This is a rather blunt tool. */ if (bp->bio_cmd == BIO_READ) { if (softc->force_read_error) { softc->force_read_error--; fail = 1; } if (softc->periodic_read_error > 0) { if (++softc->periodic_read_count >= softc->periodic_read_error) { softc->periodic_read_count = 0; fail = 1; } } } else { if (softc->force_write_error) { softc->force_write_error--; fail = 1; } } if (fail) { biofinish(bp, NULL, EIO); xpt_release_ccb(start_ccb); adaschedule(periph); return; } #endif KASSERT((bp->bio_flags & BIO_UNMAPPED) == 0 || round_page(bp->bio_bcount + bp->bio_ma_offset) / PAGE_SIZE == bp->bio_ma_n, ("Short bio %p", bp)); cam_fill_ataio(ataio, ada_retry_count, adadone, rw_op, 0, data_ptr, bp->bio_bcount, ada_default_timeout*1000); if ((softc->flags & ADA_FLAG_CAN_NCQ) && tag_code) { if (bp->bio_cmd == BIO_READ) { ata_ncq_cmd(ataio, ATA_READ_FPDMA_QUEUED, lba, count); } else { ata_ncq_cmd(ataio, ATA_WRITE_FPDMA_QUEUED, lba, count); } } else if ((softc->flags & ADA_FLAG_CAN_48BIT) && (lba + count >= ATA_MAX_28BIT_LBA || count > 256)) { if (softc->flags & ADA_FLAG_CAN_DMA48) { if (bp->bio_cmd == BIO_READ) { ata_48bit_cmd(ataio, ATA_READ_DMA48, 0, lba, count); } else { ata_48bit_cmd(ataio, ATA_WRITE_DMA48, 0, lba, count); } } else { if (bp->bio_cmd == BIO_READ) { ata_48bit_cmd(ataio, ATA_READ_MUL48, 0, lba, count); } else { ata_48bit_cmd(ataio, ATA_WRITE_MUL48, 0, lba, count); } } } else { if (count == 256) count = 0; if (softc->flags & ADA_FLAG_CAN_DMA) { if (bp->bio_cmd == BIO_READ) { ata_28bit_cmd(ataio, ATA_READ_DMA, 0, lba, count); } else { ata_28bit_cmd(ataio, ATA_WRITE_DMA, 0, lba, count); } } else { if (bp->bio_cmd == BIO_READ) { ata_28bit_cmd(ataio, ATA_READ_MUL, 0, lba, count); } else { ata_28bit_cmd(ataio, ATA_WRITE_MUL, 0, lba, count); } } } break; } case BIO_DELETE: switch (softc->delete_method) { case ADA_DELETE_NCQ_DSM_TRIM: ada_ncq_dsmtrim(softc, bp, ataio); break; case ADA_DELETE_DSM_TRIM: ada_dsmtrim(softc, bp, ataio); break; case ADA_DELETE_CFA_ERASE: ada_cfaerase(softc, bp, ataio); break; default: biofinish(bp, NULL, EOPNOTSUPP); xpt_release_ccb(start_ccb); adaschedule(periph); return; } start_ccb->ccb_h.ccb_state = ADA_CCB_TRIM; start_ccb->ccb_h.flags |= CAM_UNLOCKED; cam_iosched_submit_trim(softc->cam_iosched); goto out; case BIO_FLUSH: cam_fill_ataio(ataio, 1, adadone, CAM_DIR_NONE, 0, NULL, 0, ada_default_timeout*1000); if (softc->flags & ADA_FLAG_CAN_48BIT) ata_48bit_cmd(ataio, ATA_FLUSHCACHE48, 0, 0, 0); else ata_28bit_cmd(ataio, ATA_FLUSHCACHE, 0, 0, 0); break; case BIO_ZONE: { int error, queue_ccb; queue_ccb = 0; error = ada_zone_cmd(periph, start_ccb, bp, &queue_ccb); if ((error != 0) || (queue_ccb == 0)) { biofinish(bp, NULL, error); xpt_release_ccb(start_ccb); return; } break; } default: biofinish(bp, NULL, EOPNOTSUPP); xpt_release_ccb(start_ccb); return; } start_ccb->ccb_h.ccb_state = ADA_CCB_BUFFER_IO; start_ccb->ccb_h.flags |= CAM_UNLOCKED; out: start_ccb->ccb_h.ccb_bp = bp; softc->outstanding_cmds++; softc->refcount++; cam_periph_unlock(periph); xpt_action(start_ccb); cam_periph_lock(periph); /* May have more work to do, so ensure we stay scheduled */ adaschedule(periph); break; } case ADA_STATE_RAHEAD: case ADA_STATE_WCACHE: { cam_fill_ataio(ataio, 1, adadone, CAM_DIR_NONE, 0, NULL, 0, ada_default_timeout*1000); if (softc->state == ADA_STATE_RAHEAD) { ata_28bit_cmd(ataio, ATA_SETFEATURES, ADA_RA ? ATA_SF_ENAB_RCACHE : ATA_SF_DIS_RCACHE, 0, 0); start_ccb->ccb_h.ccb_state = ADA_CCB_RAHEAD; } else { ata_28bit_cmd(ataio, ATA_SETFEATURES, ADA_WC ? ATA_SF_ENAB_WCACHE : ATA_SF_DIS_WCACHE, 0, 0); start_ccb->ccb_h.ccb_state = ADA_CCB_WCACHE; } start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; xpt_action(start_ccb); break; } case ADA_STATE_LOGDIR: { struct ata_gp_log_dir *log_dir; if ((softc->flags & ADA_FLAG_CAN_LOG) == 0) { adaprobedone(periph, start_ccb); break; } log_dir = malloc(sizeof(*log_dir), M_ATADA, M_NOWAIT|M_ZERO); if (log_dir == NULL) { xpt_print(periph->path, "Couldn't malloc log_dir " "data\n"); softc->state = ADA_STATE_NORMAL; xpt_release_ccb(start_ccb); break; } ata_read_log(ataio, /*retries*/1, /*cbfcnp*/adadone, /*log_address*/ ATA_LOG_DIRECTORY, /*page_number*/ 0, /*block_count*/ 1, /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ? CAM_ATAIO_DMA : 0, /*data_ptr*/ (uint8_t *)log_dir, /*dxfer_len*/sizeof(*log_dir), /*timeout*/ada_default_timeout*1000); start_ccb->ccb_h.ccb_state = ADA_CCB_LOGDIR; xpt_action(start_ccb); break; } case ADA_STATE_IDDIR: { struct ata_identify_log_pages *id_dir; id_dir = malloc(sizeof(*id_dir), M_ATADA, M_NOWAIT | M_ZERO); if (id_dir == NULL) { xpt_print(periph->path, "Couldn't malloc id_dir " "data\n"); adaprobedone(periph, start_ccb); break; } ata_read_log(ataio, /*retries*/1, /*cbfcnp*/adadone, /*log_address*/ ATA_IDENTIFY_DATA_LOG, /*page_number*/ ATA_IDL_PAGE_LIST, /*block_count*/ 1, /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ? CAM_ATAIO_DMA : 0, /*data_ptr*/ (uint8_t *)id_dir, /*dxfer_len*/ sizeof(*id_dir), /*timeout*/ada_default_timeout*1000); start_ccb->ccb_h.ccb_state = ADA_CCB_IDDIR; xpt_action(start_ccb); break; } case ADA_STATE_SUP_CAP: { struct ata_identify_log_sup_cap *sup_cap; sup_cap = malloc(sizeof(*sup_cap), M_ATADA, M_NOWAIT|M_ZERO); if (sup_cap == NULL) { xpt_print(periph->path, "Couldn't malloc sup_cap " "data\n"); adaprobedone(periph, start_ccb); break; } ata_read_log(ataio, /*retries*/1, /*cbfcnp*/adadone, /*log_address*/ ATA_IDENTIFY_DATA_LOG, /*page_number*/ ATA_IDL_SUP_CAP, /*block_count*/ 1, /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ? CAM_ATAIO_DMA : 0, /*data_ptr*/ (uint8_t *)sup_cap, /*dxfer_len*/ sizeof(*sup_cap), /*timeout*/ada_default_timeout*1000); start_ccb->ccb_h.ccb_state = ADA_CCB_SUP_CAP; xpt_action(start_ccb); break; } case ADA_STATE_ZONE: { struct ata_zoned_info_log *ata_zone; ata_zone = malloc(sizeof(*ata_zone), M_ATADA, M_NOWAIT|M_ZERO); if (ata_zone == NULL) { xpt_print(periph->path, "Couldn't malloc ata_zone " "data\n"); adaprobedone(periph, start_ccb); break; } ata_read_log(ataio, /*retries*/1, /*cbfcnp*/adadone, /*log_address*/ ATA_IDENTIFY_DATA_LOG, /*page_number*/ ATA_IDL_ZDI, /*block_count*/ 1, /*protocol*/ softc->flags & ADA_FLAG_CAN_DMA ? CAM_ATAIO_DMA : 0, /*data_ptr*/ (uint8_t *)ata_zone, /*dxfer_len*/ sizeof(*ata_zone), /*timeout*/ada_default_timeout*1000); start_ccb->ccb_h.ccb_state = ADA_CCB_ZONE; xpt_action(start_ccb); break; } } } static void adaprobedone(struct cam_periph *periph, union ccb *ccb) { struct ada_softc *softc; softc = (struct ada_softc *)periph->softc; if (ccb != NULL) xpt_release_ccb(ccb); softc->state = ADA_STATE_NORMAL; softc->flags |= ADA_FLAG_PROBED; adaschedule(periph); if ((softc->flags & ADA_FLAG_ANNOUNCED) == 0) { softc->flags |= ADA_FLAG_ANNOUNCED; cam_periph_unhold(periph); } else { cam_periph_release_locked(periph); } } static void adazonedone(struct cam_periph *periph, union ccb *ccb) { struct bio *bp; bp = (struct bio *)ccb->ccb_h.ccb_bp; switch (bp->bio_zone.zone_cmd) { case DISK_ZONE_OPEN: case DISK_ZONE_CLOSE: case DISK_ZONE_FINISH: case DISK_ZONE_RWP: break; case DISK_ZONE_REPORT_ZONES: { uint32_t avail_len; struct disk_zone_report *rep; struct scsi_report_zones_hdr *hdr; struct scsi_report_zones_desc *desc; struct disk_zone_rep_entry *entry; uint32_t hdr_len, num_avail; uint32_t num_to_fill, i; rep = &bp->bio_zone.zone_params.report; avail_len = ccb->ataio.dxfer_len - ccb->ataio.resid; /* * Note that bio_resid isn't normally used for zone * commands, but it is used by devstat_end_transaction_bio() * to determine how much data was transferred. Because * the size of the SCSI/ATA data structures is different * than the size of the BIO interface structures, the * amount of data actually transferred from the drive will * be different than the amount of data transferred to * the user. */ hdr = (struct scsi_report_zones_hdr *)ccb->ataio.data_ptr; if (avail_len < sizeof(*hdr)) { /* * Is there a better error than EIO here? We asked * for at least the header, and we got less than * that. */ bp->bio_error = EIO; bp->bio_flags |= BIO_ERROR; bp->bio_resid = bp->bio_bcount; break; } hdr_len = le32dec(hdr->length); if (hdr_len > 0) rep->entries_available = hdr_len / sizeof(*desc); else rep->entries_available = 0; /* * NOTE: using the same values for the BIO version of the * same field as the SCSI/ATA values. This means we could * get some additional values that aren't defined in bio.h * if more values of the same field are defined later. */ rep->header.same = hdr->byte4 & SRZ_SAME_MASK; rep->header.maximum_lba = le64dec(hdr->maximum_lba); /* * If the drive reports no entries that match the query, * we're done. */ if (hdr_len == 0) { rep->entries_filled = 0; bp->bio_resid = bp->bio_bcount; break; } num_avail = min((avail_len - sizeof(*hdr)) / sizeof(*desc), hdr_len / sizeof(*desc)); /* * If the drive didn't return any data, then we're done. */ if (num_avail == 0) { rep->entries_filled = 0; bp->bio_resid = bp->bio_bcount; break; } num_to_fill = min(num_avail, rep->entries_allocated); /* * If the user didn't allocate any entries for us to fill, * we're done. */ if (num_to_fill == 0) { rep->entries_filled = 0; bp->bio_resid = bp->bio_bcount; break; } for (i = 0, desc = &hdr->desc_list[0], entry=&rep->entries[0]; i < num_to_fill; i++, desc++, entry++) { /* * NOTE: we're mapping the values here directly * from the SCSI/ATA bit definitions to the bio.h * definitions. There is also a warning in * disk_zone.h, but the impact is that if * additional values are added in the SCSI/ATA * specs these will be visible to consumers of * this interface. */ entry->zone_type = desc->zone_type & SRZ_TYPE_MASK; entry->zone_condition = (desc->zone_flags & SRZ_ZONE_COND_MASK) >> SRZ_ZONE_COND_SHIFT; entry->zone_flags |= desc->zone_flags & (SRZ_ZONE_NON_SEQ|SRZ_ZONE_RESET); entry->zone_length = le64dec(desc->zone_length); entry->zone_start_lba = le64dec(desc->zone_start_lba); entry->write_pointer_lba = le64dec(desc->write_pointer_lba); } rep->entries_filled = num_to_fill; /* * Note that this residual is accurate from the user's * standpoint, but the amount transferred isn't accurate * from the standpoint of what actually came back from the * drive. */ bp->bio_resid = bp->bio_bcount - (num_to_fill * sizeof(*entry)); break; } case DISK_ZONE_GET_PARAMS: default: /* * In theory we should not get a GET_PARAMS bio, since it * should be handled without queueing the command to the * drive. */ panic("%s: Invalid zone command %d", __func__, bp->bio_zone.zone_cmd); break; } if (bp->bio_zone.zone_cmd == DISK_ZONE_REPORT_ZONES) free(ccb->ataio.data_ptr, M_ATADA); } static void adadone(struct cam_periph *periph, union ccb *done_ccb) { struct ada_softc *softc; struct ccb_ataio *ataio; struct cam_path *path; uint32_t priority; int state; softc = (struct ada_softc *)periph->softc; ataio = &done_ccb->ataio; path = done_ccb->ccb_h.path; priority = done_ccb->ccb_h.pinfo.priority; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("adadone\n")); state = ataio->ccb_h.ccb_state & ADA_CCB_TYPE_MASK; switch (state) { case ADA_CCB_BUFFER_IO: case ADA_CCB_TRIM: { struct bio *bp; int error; cam_periph_lock(periph); bp = (struct bio *)done_ccb->ccb_h.ccb_bp; if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { error = adaerror(done_ccb, 0, 0); if (error == ERESTART) { /* A retry was scheduled, so just return. */ cam_periph_unlock(periph); return; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); /* * If we get an error on an NCQ DSM TRIM, fall back * to a non-NCQ DSM TRIM forever. Please note that if * CAN_NCQ_TRIM is set, CAN_TRIM is necessarily set too. * However, for this one trim, we treat it as advisory * and return success up the stack. */ if (state == ADA_CCB_TRIM && error != 0 && (softc->flags & ADA_FLAG_CAN_NCQ_TRIM) != 0) { softc->flags &= ~ADA_FLAG_CAN_NCQ_TRIM; error = 0; adasetdeletemethod(softc); } } else { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) panic("REQ_CMP with QFRZN"); error = 0; } bp->bio_error = error; if (error != 0) { bp->bio_resid = bp->bio_bcount; bp->bio_flags |= BIO_ERROR; } else { if (bp->bio_cmd == BIO_ZONE) adazonedone(periph, done_ccb); else if (state == ADA_CCB_TRIM) bp->bio_resid = 0; else bp->bio_resid = ataio->resid; if ((bp->bio_resid > 0) && (bp->bio_cmd != BIO_ZONE)) bp->bio_flags |= BIO_ERROR; } softc->outstanding_cmds--; if (softc->outstanding_cmds == 0) softc->flags |= ADA_FLAG_WAS_OTAG; /* * We need to call cam_iosched before we call biodone so that we * don't measure any activity that happens in the completion * routine, which in the case of sendfile can be quite * extensive. Release the periph refcount taken in adastart() * for each CCB. */ cam_iosched_bio_complete(softc->cam_iosched, bp, done_ccb); xpt_release_ccb(done_ccb); KASSERT(softc->refcount >= 1, ("adadone softc %p refcount %d", softc, softc->refcount)); softc->refcount--; if (state == ADA_CCB_TRIM) { TAILQ_HEAD(, bio) queue; struct bio *bp1; TAILQ_INIT(&queue); TAILQ_CONCAT(&queue, &softc->trim_req.bps, bio_queue); /* * Normally, the xpt_release_ccb() above would make sure * that when we have more work to do, that work would * get kicked off. However, we specifically keep * trim_running set to 0 before the call above to allow * other I/O to progress when many BIO_DELETE requests * are pushed down. We set trim_running to 0 and call * daschedule again so that we don't stall if there are * no other I/Os pending apart from BIO_DELETEs. */ cam_iosched_trim_done(softc->cam_iosched); adaschedule(periph); cam_periph_unlock(periph); while ((bp1 = TAILQ_FIRST(&queue)) != NULL) { TAILQ_REMOVE(&queue, bp1, bio_queue); bp1->bio_error = error; if (error != 0) { bp1->bio_flags |= BIO_ERROR; bp1->bio_resid = bp1->bio_bcount; } else bp1->bio_resid = 0; biodone(bp1); } } else { adaschedule(periph); cam_periph_unlock(periph); biodone(bp); } return; } case ADA_CCB_RAHEAD: { if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (adaerror(done_ccb, 0, 0) == ERESTART) { /* Drop freeze taken due to CAM_DEV_QFREEZE */ cam_release_devq(path, 0, 0, 0, FALSE); return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { cam_release_devq(path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } /* * Since our peripheral may be invalidated by an error * above or an external event, we must release our CCB * before releasing the reference on the peripheral. * The peripheral will only go away once the last reference * is removed, and we need it around for the CCB release * operation. */ xpt_release_ccb(done_ccb); softc->state = ADA_STATE_WCACHE; xpt_schedule(periph, priority); /* Drop freeze taken due to CAM_DEV_QFREEZE */ cam_release_devq(path, 0, 0, 0, FALSE); return; } case ADA_CCB_WCACHE: { if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (adaerror(done_ccb, 0, 0) == ERESTART) { /* Drop freeze taken due to CAM_DEV_QFREEZE */ cam_release_devq(path, 0, 0, 0, FALSE); return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { cam_release_devq(path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } /* Drop freeze taken due to CAM_DEV_QFREEZE */ cam_release_devq(path, 0, 0, 0, FALSE); if ((softc->flags & ADA_FLAG_CAN_LOG) && (softc->zone_mode != ADA_ZONE_NONE)) { xpt_release_ccb(done_ccb); softc->state = ADA_STATE_LOGDIR; xpt_schedule(periph, priority); } else { adaprobedone(periph, done_ccb); } return; } case ADA_CCB_LOGDIR: { int error; if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { error = 0; softc->valid_logdir_len = 0; bzero(&softc->ata_logdir, sizeof(softc->ata_logdir)); softc->valid_logdir_len = ataio->dxfer_len - ataio->resid; if (softc->valid_logdir_len > 0) bcopy(ataio->data_ptr, &softc->ata_logdir, min(softc->valid_logdir_len, sizeof(softc->ata_logdir))); /* * Figure out whether the Identify Device log is * supported. The General Purpose log directory * has a header, and lists the number of pages * available for each GP log identified by the * offset into the list. */ if ((softc->valid_logdir_len >= ((ATA_IDENTIFY_DATA_LOG + 1) * sizeof(uint16_t))) && (le16dec(softc->ata_logdir.header) == ATA_GP_LOG_DIR_VERSION) && (le16dec(&softc->ata_logdir.num_pages[ (ATA_IDENTIFY_DATA_LOG * sizeof(uint16_t)) - sizeof(uint16_t)]) > 0)){ softc->flags |= ADA_FLAG_CAN_IDLOG; } else { softc->flags &= ~ADA_FLAG_CAN_IDLOG; } } else { error = adaerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { /* * If we can't get the ATA log directory, * then ATA logs are effectively not * supported even if the bit is set in the * identify data. */ softc->flags &= ~(ADA_FLAG_CAN_LOG | ADA_FLAG_CAN_IDLOG); if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(ataio->data_ptr, M_ATADA); if ((error == 0) && (softc->flags & ADA_FLAG_CAN_IDLOG)) { softc->state = ADA_STATE_IDDIR; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); } else adaprobedone(periph, done_ccb); return; } case ADA_CCB_IDDIR: { int error; if ((ataio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { off_t entries_offset, max_entries; error = 0; softc->valid_iddir_len = 0; bzero(&softc->ata_iddir, sizeof(softc->ata_iddir)); softc->flags &= ~(ADA_FLAG_CAN_SUPCAP | ADA_FLAG_CAN_ZONE); softc->valid_iddir_len = ataio->dxfer_len - ataio->resid; if (softc->valid_iddir_len > 0) bcopy(ataio->data_ptr, &softc->ata_iddir, min(softc->valid_iddir_len, sizeof(softc->ata_iddir))); entries_offset = __offsetof(struct ata_identify_log_pages,entries); max_entries = softc->valid_iddir_len - entries_offset; if ((softc->valid_iddir_len > (entries_offset + 1)) && (le64dec(softc->ata_iddir.header) == ATA_IDLOG_REVISION) && (softc->ata_iddir.entry_count > 0)) { int num_entries, i; num_entries = softc->ata_iddir.entry_count; num_entries = min(num_entries, softc->valid_iddir_len - entries_offset); for (i = 0; i < num_entries && i < max_entries; i++) { if (softc->ata_iddir.entries[i] == ATA_IDL_SUP_CAP) softc->flags |= ADA_FLAG_CAN_SUPCAP; else if (softc->ata_iddir.entries[i]== ATA_IDL_ZDI) softc->flags |= ADA_FLAG_CAN_ZONE; if ((softc->flags & ADA_FLAG_CAN_SUPCAP) && (softc->flags & ADA_FLAG_CAN_ZONE)) break; } } } else { error = adaerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { /* * If we can't get the ATA Identify Data log * directory, then it effectively isn't * supported even if the ATA Log directory * a non-zero number of pages present for * this log. */ softc->flags &= ~ADA_FLAG_CAN_IDLOG; if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(ataio->data_ptr, M_ATADA); if ((error == 0) && (softc->flags & ADA_FLAG_CAN_SUPCAP)) { softc->state = ADA_STATE_SUP_CAP; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); } else adaprobedone(periph, done_ccb); return; } case ADA_CCB_SUP_CAP: { int error; if ((ataio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { uint32_t valid_len; size_t needed_size; struct ata_identify_log_sup_cap *sup_cap; error = 0; sup_cap = (struct ata_identify_log_sup_cap *) ataio->data_ptr; valid_len = ataio->dxfer_len - ataio->resid; needed_size = __offsetof(struct ata_identify_log_sup_cap, sup_zac_cap) + 1 + sizeof(sup_cap->sup_zac_cap); if (valid_len >= needed_size) { uint64_t zoned, zac_cap; zoned = le64dec(sup_cap->zoned_cap); if (zoned & ATA_ZONED_VALID) { /* * This should have already been * set, because this is also in the * ATA identify data. */ if ((zoned & ATA_ZONED_MASK) == ATA_SUPPORT_ZONE_HOST_AWARE) softc->zone_mode = ADA_ZONE_HOST_AWARE; else if ((zoned & ATA_ZONED_MASK) == ATA_SUPPORT_ZONE_DEV_MANAGED) softc->zone_mode = ADA_ZONE_DRIVE_MANAGED; } zac_cap = le64dec(sup_cap->sup_zac_cap); if (zac_cap & ATA_SUP_ZAC_CAP_VALID) { if (zac_cap & ATA_REPORT_ZONES_SUP) softc->zone_flags |= ADA_ZONE_FLAG_RZ_SUP; if (zac_cap & ATA_ND_OPEN_ZONE_SUP) softc->zone_flags |= ADA_ZONE_FLAG_OPEN_SUP; if (zac_cap & ATA_ND_CLOSE_ZONE_SUP) softc->zone_flags |= ADA_ZONE_FLAG_CLOSE_SUP; if (zac_cap & ATA_ND_FINISH_ZONE_SUP) softc->zone_flags |= ADA_ZONE_FLAG_FINISH_SUP; if (zac_cap & ATA_ND_RWP_SUP) softc->zone_flags |= ADA_ZONE_FLAG_RWP_SUP; } else { /* * This field was introduced in * ACS-4, r08 on April 28th, 2015. * If the drive firmware was written * to an earlier spec, it won't have * the field. So, assume all * commands are supported. */ softc->zone_flags |= ADA_ZONE_FLAG_SUP_MASK; } } } else { error = adaerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { /* * If we can't get the ATA Identify Data * Supported Capabilities page, clear the * flag... */ softc->flags &= ~ADA_FLAG_CAN_SUPCAP; /* * And clear zone capabilities. */ softc->zone_flags &= ~ADA_ZONE_FLAG_SUP_MASK; if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(ataio->data_ptr, M_ATADA); if ((error == 0) && (softc->flags & ADA_FLAG_CAN_ZONE)) { softc->state = ADA_STATE_ZONE; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); } else adaprobedone(periph, done_ccb); return; } case ADA_CCB_ZONE: { int error; if ((ataio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { struct ata_zoned_info_log *zi_log; uint32_t valid_len; size_t needed_size; zi_log = (struct ata_zoned_info_log *)ataio->data_ptr; valid_len = ataio->dxfer_len - ataio->resid; needed_size = __offsetof(struct ata_zoned_info_log, version_info) + 1 + sizeof(zi_log->version_info); if (valid_len >= needed_size) { uint64_t tmpvar; tmpvar = le64dec(zi_log->zoned_cap); if (tmpvar & ATA_ZDI_CAP_VALID) { if (tmpvar & ATA_ZDI_CAP_URSWRZ) softc->zone_flags |= ADA_ZONE_FLAG_URSWRZ; else softc->zone_flags &= ~ADA_ZONE_FLAG_URSWRZ; } tmpvar = le64dec(zi_log->optimal_seq_zones); if (tmpvar & ATA_ZDI_OPT_SEQ_VALID) { softc->zone_flags |= ADA_ZONE_FLAG_OPT_SEQ_SET; softc->optimal_seq_zones = (tmpvar & ATA_ZDI_OPT_SEQ_MASK); } else { softc->zone_flags &= ~ADA_ZONE_FLAG_OPT_SEQ_SET; softc->optimal_seq_zones = 0; } tmpvar =le64dec(zi_log->optimal_nonseq_zones); if (tmpvar & ATA_ZDI_OPT_NS_VALID) { softc->zone_flags |= ADA_ZONE_FLAG_OPT_NONSEQ_SET; softc->optimal_nonseq_zones = (tmpvar & ATA_ZDI_OPT_NS_MASK); } else { softc->zone_flags &= ~ADA_ZONE_FLAG_OPT_NONSEQ_SET; softc->optimal_nonseq_zones = 0; } tmpvar = le64dec(zi_log->max_seq_req_zones); if (tmpvar & ATA_ZDI_MAX_SEQ_VALID) { softc->zone_flags |= ADA_ZONE_FLAG_MAX_SEQ_SET; softc->max_seq_zones = (tmpvar & ATA_ZDI_MAX_SEQ_MASK); } else { softc->zone_flags &= ~ADA_ZONE_FLAG_MAX_SEQ_SET; softc->max_seq_zones = 0; } } } else { error = adaerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { softc->flags &= ~ADA_FLAG_CAN_ZONE; softc->flags &= ~ADA_ZONE_FLAG_SET_MASK; if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(ataio->data_ptr, M_ATADA); adaprobedone(periph, done_ccb); return; } case ADA_CCB_DUMP: /* No-op. We're polling */ return; default: break; } xpt_release_ccb(done_ccb); } static int adaerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags) { #ifdef CAM_IO_STATS struct ada_softc *softc; struct cam_periph *periph; periph = xpt_path_periph(ccb->ccb_h.path); softc = (struct ada_softc *)periph->softc; switch (ccb->ccb_h.status & CAM_STATUS_MASK) { case CAM_CMD_TIMEOUT: softc->timeouts++; break; case CAM_REQ_ABORTED: case CAM_REQ_CMP_ERR: case CAM_REQ_TERMIO: case CAM_UNREC_HBA_ERROR: case CAM_DATA_RUN_ERR: case CAM_ATA_STATUS_ERROR: softc->errors++; break; default: break; } #endif return(cam_periph_error(ccb, cam_flags, sense_flags)); } static void adasetgeom(struct ada_softc *softc, struct ccb_getdev *cgd) { struct disk_params *dp = &softc->params; u_int64_t lbasize48; u_int32_t lbasize; u_int maxio, d_flags; dp->secsize = ata_logical_sector_size(&cgd->ident_data); if ((cgd->ident_data.atavalid & ATA_FLAG_54_58) && cgd->ident_data.current_heads != 0 && cgd->ident_data.current_sectors != 0) { dp->heads = cgd->ident_data.current_heads; dp->secs_per_track = cgd->ident_data.current_sectors; dp->cylinders = cgd->ident_data.cylinders; dp->sectors = (u_int32_t)cgd->ident_data.current_size_1 | ((u_int32_t)cgd->ident_data.current_size_2 << 16); } else { dp->heads = cgd->ident_data.heads; dp->secs_per_track = cgd->ident_data.sectors; dp->cylinders = cgd->ident_data.cylinders; dp->sectors = cgd->ident_data.cylinders * (u_int32_t)(dp->heads * dp->secs_per_track); } lbasize = (u_int32_t)cgd->ident_data.lba_size_1 | ((u_int32_t)cgd->ident_data.lba_size_2 << 16); /* use the 28bit LBA size if valid or bigger than the CHS mapping */ if (cgd->ident_data.cylinders == 16383 || dp->sectors < lbasize) dp->sectors = lbasize; /* use the 48bit LBA size if valid */ lbasize48 = ((u_int64_t)cgd->ident_data.lba_size48_1) | ((u_int64_t)cgd->ident_data.lba_size48_2 << 16) | ((u_int64_t)cgd->ident_data.lba_size48_3 << 32) | ((u_int64_t)cgd->ident_data.lba_size48_4 << 48); if ((cgd->ident_data.support.command2 & ATA_SUPPORT_ADDRESS48) && lbasize48 > ATA_MAX_28BIT_LBA) dp->sectors = lbasize48; maxio = softc->cpi.maxio; /* Honor max I/O size of SIM */ if (maxio == 0) maxio = DFLTPHYS; /* traditional default */ else if (maxio > maxphys) maxio = maxphys; /* for safety */ if (softc->flags & ADA_FLAG_CAN_48BIT) maxio = min(maxio, 65536 * softc->params.secsize); else /* 28bit ATA command limit */ maxio = min(maxio, 256 * softc->params.secsize); if (softc->quirks & ADA_Q_128KB) maxio = min(maxio, 128 * 1024); softc->disk->d_maxsize = maxio; d_flags = DISKFLAG_DIRECT_COMPLETION | DISKFLAG_CANZONE; if (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) d_flags |= DISKFLAG_CANFLUSHCACHE; if (softc->flags & ADA_FLAG_CAN_TRIM) { d_flags |= DISKFLAG_CANDELETE; softc->disk->d_delmaxsize = softc->params.secsize * ATA_DSM_RANGE_MAX * softc->trim_max_ranges; } else if ((softc->flags & ADA_FLAG_CAN_CFA) && !(softc->flags & ADA_FLAG_CAN_48BIT)) { d_flags |= DISKFLAG_CANDELETE; softc->disk->d_delmaxsize = 256 * softc->params.secsize; } else softc->disk->d_delmaxsize = maxio; if ((softc->cpi.hba_misc & PIM_UNMAPPED) != 0) { d_flags |= DISKFLAG_UNMAPPED_BIO; softc->flags |= ADA_FLAG_UNMAPPEDIO; } softc->disk->d_flags = d_flags; strlcpy(softc->disk->d_descr, cgd->ident_data.model, MIN(sizeof(softc->disk->d_descr), sizeof(cgd->ident_data.model))); strlcpy(softc->disk->d_ident, cgd->ident_data.serial, MIN(sizeof(softc->disk->d_ident), sizeof(cgd->ident_data.serial))); softc->disk->d_sectorsize = softc->params.secsize; softc->disk->d_mediasize = (off_t)softc->params.sectors * softc->params.secsize; if (ata_physical_sector_size(&cgd->ident_data) != softc->params.secsize) { softc->disk->d_stripesize = ata_physical_sector_size(&cgd->ident_data); softc->disk->d_stripeoffset = (softc->disk->d_stripesize - ata_logical_sector_offset(&cgd->ident_data)) % softc->disk->d_stripesize; } else if (softc->quirks & ADA_Q_4K) { softc->disk->d_stripesize = 4096; softc->disk->d_stripeoffset = 0; } softc->disk->d_fwsectors = softc->params.secs_per_track; softc->disk->d_fwheads = softc->params.heads; softc->disk->d_rotation_rate = cgd->ident_data.media_rotation_rate; snprintf(softc->disk->d_attachment, sizeof(softc->disk->d_attachment), "%s%d", softc->cpi.dev_name, softc->cpi.unit_number); } static void adasendorderedtag(void *arg) { struct ada_softc *softc = arg; if (ada_send_ordered) { if (softc->outstanding_cmds > 0) { if ((softc->flags & ADA_FLAG_WAS_OTAG) == 0) softc->flags |= ADA_FLAG_NEED_OTAG; softc->flags &= ~ADA_FLAG_WAS_OTAG; } } /* Queue us up again */ callout_reset(&softc->sendordered_c, (ada_default_timeout * hz) / ADA_ORDEREDTAG_INTERVAL, adasendorderedtag, softc); } /* * Step through all ADA peripheral drivers, and if the device is still open, * sync the disk cache to physical media. */ static void adaflush(void) { struct cam_periph *periph; struct ada_softc *softc; union ccb *ccb; int error; CAM_PERIPH_FOREACH(periph, &adadriver) { softc = (struct ada_softc *)periph->softc; if (SCHEDULER_STOPPED()) { /* If we paniced with the lock held, do not recurse. */ if (!cam_periph_owned(periph) && (softc->flags & ADA_FLAG_OPEN)) { adadump(softc->disk, NULL, 0, 0, 0); } continue; } cam_periph_lock(periph); /* * We only sync the cache if the drive is still open, and * if the drive is capable of it.. */ if (((softc->flags & ADA_FLAG_OPEN) == 0) || (softc->flags & ADA_FLAG_CAN_FLUSHCACHE) == 0) { cam_periph_unlock(periph); continue; } ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); cam_fill_ataio(&ccb->ataio, 0, NULL, CAM_DIR_NONE, 0, NULL, 0, ada_default_timeout*1000); if (softc->flags & ADA_FLAG_CAN_48BIT) ata_48bit_cmd(&ccb->ataio, ATA_FLUSHCACHE48, 0, 0, 0); else ata_28bit_cmd(&ccb->ataio, ATA_FLUSHCACHE, 0, 0, 0); error = cam_periph_runccb(ccb, adaerror, /*cam_flags*/0, /*sense_flags*/ SF_NO_RECOVERY | SF_NO_RETRY, softc->disk->d_devstat); if (error != 0) xpt_print(periph->path, "Synchronize cache failed\n"); xpt_release_ccb(ccb); cam_periph_unlock(periph); } } static void adaspindown(uint8_t cmd, int flags) { struct cam_periph *periph; struct ada_softc *softc; struct ccb_ataio local_ccb; int error; CAM_PERIPH_FOREACH(periph, &adadriver) { /* If we paniced with lock held - not recurse here. */ if (cam_periph_owned(periph)) continue; cam_periph_lock(periph); softc = (struct ada_softc *)periph->softc; /* * We only spin-down the drive if it is capable of it.. */ if ((softc->flags & ADA_FLAG_CAN_POWERMGT) == 0) { cam_periph_unlock(periph); continue; } if (bootverbose) xpt_print(periph->path, "spin-down\n"); memset(&local_ccb, 0, sizeof(local_ccb)); xpt_setup_ccb(&local_ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL); local_ccb.ccb_h.ccb_state = ADA_CCB_DUMP; cam_fill_ataio(&local_ccb, 0, NULL, CAM_DIR_NONE | flags, 0, NULL, 0, ada_default_timeout*1000); ata_28bit_cmd(&local_ccb, cmd, 0, 0, 0); error = cam_periph_runccb((union ccb *)&local_ccb, adaerror, /*cam_flags*/0, /*sense_flags*/ SF_NO_RECOVERY | SF_NO_RETRY, softc->disk->d_devstat); if (error != 0) xpt_print(periph->path, "Spin-down disk failed\n"); cam_periph_unlock(periph); } } static void adashutdown(void *arg, int howto) { int how; adaflush(); /* * STANDBY IMMEDIATE saves any volatile data to the drive. It also spins * down hard drives. IDLE IMMEDIATE also saves the volatile data without * a spindown. We send the former when we expect to lose power soon. For * a warm boot, we send the latter to avoid a thundering herd of spinups * just after the kernel loads while probing. We have to do something to * flush the data because the BIOS in many systems resets the HBA * causing a COMINIT/COMRESET negotiation, which some drives interpret * as license to toss the volatile data, and others count as unclean * shutdown when in the Active PM state in SMART attributes. * * adaspindown will ensure that we don't send this to a drive that * doesn't support it. */ if (ada_spindown_shutdown != 0) { how = (howto & (RB_HALT | RB_POWEROFF | RB_POWERCYCLE)) ? ATA_STANDBY_IMMEDIATE : ATA_IDLE_IMMEDIATE; adaspindown(how, 0); } } static void adasuspend(void *arg) { adaflush(); /* * SLEEP also fushes any volatile data, like STANDBY IMEDIATE, * so we don't need to send it as well. */ if (ada_spindown_suspend != 0) adaspindown(ATA_SLEEP, CAM_DEV_QFREEZE); } static void adaresume(void *arg) { struct cam_periph *periph; struct ada_softc *softc; if (ada_spindown_suspend == 0) return; CAM_PERIPH_FOREACH(periph, &adadriver) { cam_periph_lock(periph); softc = (struct ada_softc *)periph->softc; /* * We only spin-down the drive if it is capable of it.. */ if ((softc->flags & ADA_FLAG_CAN_POWERMGT) == 0) { cam_periph_unlock(periph); continue; } if (bootverbose) xpt_print(periph->path, "resume\n"); /* * Drop freeze taken due to CAM_DEV_QFREEZE flag set on * sleep request. */ cam_release_devq(periph->path, /*relsim_flags*/0, /*openings*/0, /*timeout*/0, /*getcount_only*/0); cam_periph_unlock(periph); } } #endif /* _KERNEL */ diff --git a/sys/cam/ata/ata_xpt.c b/sys/cam/ata/ata_xpt.c index 0f94e556745a..c13c7b493c78 100644 --- a/sys/cam/ata/ata_xpt.c +++ b/sys/cam/ata/ata_xpt.c @@ -1,2288 +1,2295 @@ /*- * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 2009 Alexander Motin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for xpt_print below */ #include "opt_cam.h" struct ata_quirk_entry { struct scsi_inquiry_pattern inq_pat; u_int8_t quirks; #define CAM_QUIRK_MAXTAGS 0x01 u_int mintags; u_int maxtags; }; static periph_init_t aprobe_periph_init; static struct periph_driver aprobe_driver = { aprobe_periph_init, "aprobe", TAILQ_HEAD_INITIALIZER(aprobe_driver.units), /* generation */ 0, CAM_PERIPH_DRV_EARLY }; PERIPHDRIVER_DECLARE(aprobe, aprobe_driver); typedef enum { PROBE_RESET, PROBE_IDENTIFY, PROBE_SPINUP, PROBE_SETMODE, PROBE_SETPM, PROBE_SETAPST, PROBE_SETDMAAA, PROBE_SETAN, PROBE_SET_MULTI, PROBE_INQUIRY, PROBE_FULL_INQUIRY, PROBE_PM_PID, PROBE_PM_PRV, PROBE_IDENTIFY_SES, PROBE_IDENTIFY_SAFTE, PROBE_DONE, PROBE_INVALID } aprobe_action; static char *probe_action_text[] = { "PROBE_RESET", "PROBE_IDENTIFY", "PROBE_SPINUP", "PROBE_SETMODE", "PROBE_SETPM", "PROBE_SETAPST", "PROBE_SETDMAAA", "PROBE_SETAN", "PROBE_SET_MULTI", "PROBE_INQUIRY", "PROBE_FULL_INQUIRY", "PROBE_PM_PID", "PROBE_PM_PRV", "PROBE_IDENTIFY_SES", "PROBE_IDENTIFY_SAFTE", "PROBE_DONE", "PROBE_INVALID" }; #define PROBE_SET_ACTION(softc, newaction) \ do { \ char **text; \ text = probe_action_text; \ CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \ ("Probe %s to %s\n", text[(softc)->action], \ text[(newaction)])); \ (softc)->action = (newaction); \ } while(0) typedef enum { PROBE_NO_ANNOUNCE = 0x04 } aprobe_flags; typedef struct { TAILQ_HEAD(, ccb_hdr) request_ccbs; struct ata_params ident_data; aprobe_action action; aprobe_flags flags; uint32_t pm_pid; uint32_t pm_prv; int restart; int spinup; int faults; u_int caps; struct cam_periph *periph; } probe_softc; static struct ata_quirk_entry ata_quirk_table[] = { { /* Default tagged queuing parameters for all devices */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, /*vendor*/"*", /*product*/"*", /*revision*/"*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, }; static cam_status aproberegister(struct cam_periph *periph, void *arg); static void aprobeschedule(struct cam_periph *probe_periph); static void aprobestart(struct cam_periph *periph, union ccb *start_ccb); static void aproberequestdefaultnegotiation(struct cam_periph *periph); static void aprobedone(struct cam_periph *periph, union ccb *done_ccb); static void aprobecleanup(struct cam_periph *periph); static void ata_find_quirk(struct cam_ed *device); static void ata_scan_bus(struct cam_periph *periph, union ccb *ccb); static void ata_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *ccb); static void axptscandone(struct cam_periph *periph, union ccb *done_ccb); static struct cam_ed * ata_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static void ata_device_transport(struct cam_path *path); static void ata_get_transfer_settings(struct ccb_trans_settings *cts); static void ata_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_path *path, int async_update); static void ata_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg); static void ata_action(union ccb *start_ccb); static void ata_announce_periph(struct cam_periph *periph); static void ata_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb); static void ata_proto_announce(struct cam_ed *device); static void ata_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb); static void ata_proto_denounce(struct cam_ed *device); static void ata_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb); static void ata_proto_debug_out(union ccb *ccb); static void semb_proto_announce(struct cam_ed *device); static void semb_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb); static void semb_proto_denounce(struct cam_ed *device); static void semb_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb); static int ata_dma = 1; static int atapi_dma = 1; TUNABLE_INT("hw.ata.ata_dma", &ata_dma); TUNABLE_INT("hw.ata.atapi_dma", &atapi_dma); static struct xpt_xport_ops ata_xport_ops = { .alloc_device = ata_alloc_device, .action = ata_action, .async = ata_dev_async, .announce = ata_announce_periph, .announce_sbuf = ata_announce_periph_sbuf, }; #define ATA_XPT_XPORT(x, X) \ static struct xpt_xport ata_xport_ ## x = { \ .xport = XPORT_ ## X, \ .name = #x, \ .ops = &ata_xport_ops, \ }; \ CAM_XPT_XPORT(ata_xport_ ## x); ATA_XPT_XPORT(ata, ATA); ATA_XPT_XPORT(sata, SATA); #undef ATA_XPORT_XPORT static struct xpt_proto_ops ata_proto_ops_ata = { .announce = ata_proto_announce, .announce_sbuf = ata_proto_announce_sbuf, .denounce = ata_proto_denounce, .denounce_sbuf = ata_proto_denounce_sbuf, .debug_out = ata_proto_debug_out, }; static struct xpt_proto ata_proto_ata = { .proto = PROTO_ATA, .name = "ata", .ops = &ata_proto_ops_ata, }; static struct xpt_proto_ops ata_proto_ops_satapm = { .announce = ata_proto_announce, .announce_sbuf = ata_proto_announce_sbuf, .denounce = ata_proto_denounce, .denounce_sbuf = ata_proto_denounce_sbuf, .debug_out = ata_proto_debug_out, }; static struct xpt_proto ata_proto_satapm = { .proto = PROTO_SATAPM, .name = "satapm", .ops = &ata_proto_ops_satapm, }; static struct xpt_proto_ops ata_proto_ops_semb = { .announce = semb_proto_announce, .announce_sbuf = semb_proto_announce_sbuf, .denounce = semb_proto_denounce, .denounce_sbuf = semb_proto_denounce_sbuf, .debug_out = ata_proto_debug_out, }; static struct xpt_proto ata_proto_semb = { .proto = PROTO_SEMB, .name = "semb", .ops = &ata_proto_ops_semb, }; CAM_XPT_PROTO(ata_proto_ata); CAM_XPT_PROTO(ata_proto_satapm); CAM_XPT_PROTO(ata_proto_semb); static void aprobe_periph_init(void) { } static cam_status aproberegister(struct cam_periph *periph, void *arg) { union ccb *request_ccb; /* CCB representing the probe request */ probe_softc *softc; request_ccb = (union ccb *)arg; if (request_ccb == NULL) { printf("proberegister: no probe CCB, " "can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (probe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_ZERO | M_NOWAIT); if (softc == NULL) { printf("proberegister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } TAILQ_INIT(&softc->request_ccbs); TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); softc->flags = 0; periph->softc = softc; softc->periph = periph; softc->action = PROBE_INVALID; if (cam_periph_acquire(periph) != 0) return (CAM_REQ_CMP_ERR); CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n")); ata_device_transport(periph->path); aprobeschedule(periph); return(CAM_REQ_CMP); } static void aprobeschedule(struct cam_periph *periph) { union ccb *ccb; probe_softc *softc; softc = (probe_softc *)periph->softc; ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); if ((periph->path->device->flags & CAM_DEV_UNCONFIGURED) || periph->path->device->protocol == PROTO_SATAPM || periph->path->device->protocol == PROTO_SEMB) PROBE_SET_ACTION(softc, PROBE_RESET); else PROBE_SET_ACTION(softc, PROBE_IDENTIFY); if (ccb->crcn.flags & CAM_EXPECT_INQ_CHANGE) softc->flags |= PROBE_NO_ANNOUNCE; else softc->flags &= ~PROBE_NO_ANNOUNCE; xpt_schedule(periph, CAM_PRIORITY_XPT); } static void aprobestart(struct cam_periph *periph, union ccb *start_ccb) { struct ccb_trans_settings cts; struct ccb_ataio *ataio; struct ccb_scsiio *csio; probe_softc *softc; struct cam_path *path; struct ata_params *ident_buf; u_int oif; CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("aprobestart\n")); softc = (probe_softc *)periph->softc; path = start_ccb->ccb_h.path; ataio = &start_ccb->ataio; csio = &start_ccb->csio; ident_buf = &periph->path->device->ident_data; if (softc->restart) { softc->restart = 0; if ((path->device->flags & CAM_DEV_UNCONFIGURED) || path->device->protocol == PROTO_SATAPM || path->device->protocol == PROTO_SEMB) softc->action = PROBE_RESET; else softc->action = PROBE_IDENTIFY; } switch (softc->action) { case PROBE_RESET: cam_fill_ataio(ataio, 0, aprobedone, /*flags*/CAM_DIR_NONE, 0, /*data_ptr*/NULL, /*dxfer_len*/0, 15 * 1000); ata_reset_cmd(ataio); break; case PROBE_IDENTIFY: cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_IN, 0, /*data_ptr*/(u_int8_t *)&softc->ident_data, /*dxfer_len*/sizeof(softc->ident_data), 30 * 1000); if (path->device->protocol == PROTO_ATA) ata_28bit_cmd(ataio, ATA_ATA_IDENTIFY, 0, 0, 0); else ata_28bit_cmd(ataio, ATA_ATAPI_IDENTIFY, 0, 0, 0); break; case PROBE_SPINUP: if (bootverbose) xpt_print(path, "Spinning up device\n"); cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_NONE | CAM_HIGH_POWER, 0, /*data_ptr*/NULL, /*dxfer_len*/0, 30 * 1000); ata_28bit_cmd(ataio, ATA_SETFEATURES, ATA_SF_PUIS_SPINUP, 0, 0); break; case PROBE_SETMODE: { int mode, wantmode; mode = 0; /* Fetch user modes from SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_ATA) { if (cts.xport_specific.ata.valid & CTS_ATA_VALID_MODE) mode = cts.xport_specific.ata.mode; } else { if (cts.xport_specific.sata.valid & CTS_SATA_VALID_MODE) mode = cts.xport_specific.sata.mode; } if (path->device->protocol == PROTO_ATA) { if (ata_dma == 0 && (mode == 0 || mode > ATA_PIO_MAX)) mode = ATA_PIO_MAX; } else { if (atapi_dma == 0 && (mode == 0 || mode > ATA_PIO_MAX)) mode = ATA_PIO_MAX; } negotiate: /* Honor device capabilities. */ wantmode = mode = ata_max_mode(ident_buf, mode); /* Report modes to SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; if (path->device->transport == XPORT_ATA) { cts.xport_specific.ata.mode = mode; cts.xport_specific.ata.valid = CTS_ATA_VALID_MODE; } else { cts.xport_specific.sata.mode = mode; cts.xport_specific.sata.valid = CTS_SATA_VALID_MODE; } xpt_action((union ccb *)&cts); /* Fetch current modes from SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_ATA) { if (cts.xport_specific.ata.valid & CTS_ATA_VALID_MODE) mode = cts.xport_specific.ata.mode; } else { if (cts.xport_specific.sata.valid & CTS_SATA_VALID_MODE) mode = cts.xport_specific.sata.mode; } /* If SIM disagree - renegotiate. */ if (mode != wantmode) goto negotiate; /* Remember what transport thinks about DMA. */ oif = path->device->inq_flags; if (mode < ATA_DMA) path->device->inq_flags &= ~SID_DMA; else path->device->inq_flags |= SID_DMA; if (path->device->inq_flags != oif) xpt_async(AC_GETDEV_CHANGED, path, NULL); cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_NONE, 0, /*data_ptr*/NULL, /*dxfer_len*/0, 30 * 1000); ata_28bit_cmd(ataio, ATA_SETFEATURES, ATA_SF_SETXFER, 0, mode); break; } case PROBE_SETPM: cam_fill_ataio(ataio, 1, aprobedone, CAM_DIR_NONE, 0, NULL, 0, 30*1000); ata_28bit_cmd(ataio, ATA_SETFEATURES, (softc->caps & CTS_SATA_CAPS_H_PMREQ) ? 0x10 : 0x90, 0, 0x03); break; case PROBE_SETAPST: cam_fill_ataio(ataio, 1, aprobedone, CAM_DIR_NONE, 0, NULL, 0, 30*1000); ata_28bit_cmd(ataio, ATA_SETFEATURES, (softc->caps & CTS_SATA_CAPS_H_APST) ? 0x10 : 0x90, 0, 0x07); break; case PROBE_SETDMAAA: cam_fill_ataio(ataio, 1, aprobedone, CAM_DIR_NONE, 0, NULL, 0, 30*1000); ata_28bit_cmd(ataio, ATA_SETFEATURES, (softc->caps & CTS_SATA_CAPS_H_DMAAA) ? 0x10 : 0x90, 0, 0x02); break; case PROBE_SETAN: /* Remember what transport thinks about AEN. */ oif = path->device->inq_flags; if (softc->caps & CTS_SATA_CAPS_H_AN) path->device->inq_flags |= SID_AEN; else path->device->inq_flags &= ~SID_AEN; if (path->device->inq_flags != oif) xpt_async(AC_GETDEV_CHANGED, path, NULL); cam_fill_ataio(ataio, 1, aprobedone, CAM_DIR_NONE, 0, NULL, 0, 30*1000); ata_28bit_cmd(ataio, ATA_SETFEATURES, (softc->caps & CTS_SATA_CAPS_H_AN) ? 0x10 : 0x90, 0, 0x05); break; case PROBE_SET_MULTI: { u_int sectors, bytecount; bytecount = 8192; /* SATA maximum */ /* Fetch user bytecount from SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_ATA) { if (cts.xport_specific.ata.valid & CTS_ATA_VALID_BYTECOUNT) bytecount = cts.xport_specific.ata.bytecount; } else { if (cts.xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) bytecount = cts.xport_specific.sata.bytecount; } /* Honor device capabilities. */ sectors = max(1, min(ident_buf->sectors_intr & 0xff, bytecount / ata_logical_sector_size(ident_buf))); /* Report bytecount to SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; if (path->device->transport == XPORT_ATA) { cts.xport_specific.ata.bytecount = sectors * ata_logical_sector_size(ident_buf); cts.xport_specific.ata.valid = CTS_ATA_VALID_BYTECOUNT; } else { cts.xport_specific.sata.bytecount = sectors * ata_logical_sector_size(ident_buf); cts.xport_specific.sata.valid = CTS_SATA_VALID_BYTECOUNT; } xpt_action((union ccb *)&cts); /* Fetch current bytecount from SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_ATA) { if (cts.xport_specific.ata.valid & CTS_ATA_VALID_BYTECOUNT) bytecount = cts.xport_specific.ata.bytecount; } else { if (cts.xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) bytecount = cts.xport_specific.sata.bytecount; } sectors = bytecount / ata_logical_sector_size(ident_buf); cam_fill_ataio(ataio, 1, aprobedone, CAM_DIR_NONE, 0, NULL, 0, 30*1000); ata_28bit_cmd(ataio, ATA_SET_MULTI, 0, 0, sectors); break; } case PROBE_INQUIRY: { u_int bytecount; bytecount = 8192; /* SATA maximum */ /* Fetch user bytecount from SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_ATA) { if (cts.xport_specific.ata.valid & CTS_ATA_VALID_BYTECOUNT) bytecount = cts.xport_specific.ata.bytecount; } else { if (cts.xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT) bytecount = cts.xport_specific.sata.bytecount; } /* Honor device capabilities. */ bytecount &= ~1; bytecount = max(2, min(65534, bytecount)); if (ident_buf->satacapabilities != 0x0000 && ident_buf->satacapabilities != 0xffff) { bytecount = min(8192, bytecount); } /* Report bytecount to SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; if (path->device->transport == XPORT_ATA) { cts.xport_specific.ata.bytecount = bytecount; cts.xport_specific.ata.valid = CTS_ATA_VALID_BYTECOUNT; } else { cts.xport_specific.sata.bytecount = bytecount; cts.xport_specific.sata.valid = CTS_SATA_VALID_BYTECOUNT; } xpt_action((union ccb *)&cts); /* FALLTHROUGH */ } case PROBE_FULL_INQUIRY: { u_int inquiry_len; struct scsi_inquiry_data *inq_buf = &path->device->inq_data; if (softc->action == PROBE_INQUIRY) inquiry_len = SHORT_INQUIRY_LENGTH; else inquiry_len = SID_ADDITIONAL_LENGTH(inq_buf); /* * Some parallel SCSI devices fail to send an * ignore wide residue message when dealing with * odd length inquiry requests. Round up to be * safe. */ inquiry_len = roundup2(inquiry_len, 2); scsi_inquiry(csio, /*retries*/1, aprobedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)inq_buf, inquiry_len, /*evpd*/FALSE, /*page_code*/0, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } case PROBE_PM_PID: cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_NONE, 0, /*data_ptr*/NULL, /*dxfer_len*/0, 10 * 1000); ata_pm_read_cmd(ataio, 0, 15); break; case PROBE_PM_PRV: cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_NONE, 0, /*data_ptr*/NULL, /*dxfer_len*/0, 10 * 1000); ata_pm_read_cmd(ataio, 1, 15); break; case PROBE_IDENTIFY_SES: cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_IN, 0, /*data_ptr*/(u_int8_t *)&softc->ident_data, /*dxfer_len*/sizeof(softc->ident_data), 30 * 1000); ata_28bit_cmd(ataio, ATA_SEP_ATTN, 0xEC, 0x02, sizeof(softc->ident_data) / 4); break; case PROBE_IDENTIFY_SAFTE: cam_fill_ataio(ataio, 1, aprobedone, /*flags*/CAM_DIR_IN, 0, /*data_ptr*/(u_int8_t *)&softc->ident_data, /*dxfer_len*/sizeof(softc->ident_data), 30 * 1000); ata_28bit_cmd(ataio, ATA_SEP_ATTN, 0xEC, 0x00, sizeof(softc->ident_data) / 4); break; default: panic("aprobestart: invalid action state 0x%x\n", softc->action); } start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; xpt_action(start_ccb); } static void aproberequestdefaultnegotiation(struct cam_periph *periph) { struct ccb_trans_settings cts; bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) return; cts.xport_specific.valid = 0; cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); } static void aprobedone(struct cam_periph *periph, union ccb *done_ccb) { struct ccb_trans_settings cts; struct ata_params *ident_buf; struct scsi_inquiry_data *inq_buf; probe_softc *softc; struct cam_path *path; cam_status status; u_int32_t priority; u_int caps, oif; int changed, found = 1; static const uint8_t fake_device_id_hdr[8] = {0, SVPD_DEVICE_ID, 0, 12, SVPD_ID_CODESET_BINARY, SVPD_ID_TYPE_NAA, 0, 8}; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("aprobedone\n")); softc = (probe_softc *)periph->softc; path = done_ccb->ccb_h.path; priority = done_ccb->ccb_h.pinfo.priority; ident_buf = &path->device->ident_data; inq_buf = &path->device->inq_data; if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, softc->restart ? (SF_NO_RECOVERY | SF_NO_RETRY) : 0 ) == ERESTART) { out: /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ cam_release_devq(path, 0, 0, 0, FALSE); return; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE); } status = done_ccb->ccb_h.status & CAM_STATUS_MASK; if (softc->restart) { softc->faults++; if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_CMD_TIMEOUT) softc->faults += 4; if (softc->faults < 10) goto done; else softc->restart = 0; /* Old PIO2 devices may not support mode setting. */ } else if (softc->action == PROBE_SETMODE && status == CAM_ATA_STATUS_ERROR && ata_max_pmode(ident_buf) <= ATA_PIO2 && (ident_buf->capabilities1 & ATA_SUPPORT_IORDY) == 0) { goto noerror; /* * Some old WD SATA disks report supported and enabled * device-initiated interface power management, but return * ABORT on attempt to disable it. */ } else if (softc->action == PROBE_SETPM && status == CAM_ATA_STATUS_ERROR) { goto noerror; /* * Some old WD SATA disks have broken SPINUP handling. * If we really fail to spin up the disk, then there will be * some media access errors later on, but at least we will * have a device to interact with for recovery attempts. */ } else if (softc->action == PROBE_SPINUP && status == CAM_ATA_STATUS_ERROR) { goto noerror; /* * Some HP SATA disks report supported DMA Auto-Activation, * but return ABORT on attempt to enable it. */ } else if (softc->action == PROBE_SETDMAAA && status == CAM_ATA_STATUS_ERROR) { goto noerror; /* * SES and SAF-TE SEPs have different IDENTIFY commands, * but SATA specification doesn't tell how to identify them. * Until better way found, just try another if first fail. */ } else if (softc->action == PROBE_IDENTIFY_SES && status == CAM_ATA_STATUS_ERROR) { PROBE_SET_ACTION(softc, PROBE_IDENTIFY_SAFTE); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } /* * If we get to this point, we got an error status back * from the inquiry and the error status doesn't require * automatically retrying the command. Therefore, the * inquiry failed. If we had inquiry information before * for this device, but this latest inquiry command failed, * the device has probably gone away. If this device isn't * already marked unconfigured, notify the peripheral * drivers that this device is no more. */ device_fail: if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) xpt_async(AC_LOST_DEVICE, path, NULL); PROBE_SET_ACTION(softc, PROBE_INVALID); found = 0; goto done; } noerror: if (softc->restart) goto done; switch (softc->action) { case PROBE_RESET: { int sign = (done_ccb->ataio.res.lba_high << 8) + done_ccb->ataio.res.lba_mid; CAM_DEBUG(path, CAM_DEBUG_PROBE, ("SIGNATURE: %04x\n", sign)); if (sign == 0x0000 && done_ccb->ccb_h.target_id != 15) { path->device->protocol = PROTO_ATA; PROBE_SET_ACTION(softc, PROBE_IDENTIFY); } else if (sign == 0x9669 && done_ccb->ccb_h.target_id == 15) { /* Report SIM that PM is present. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.xport_specific.sata.pm_present = 1; cts.xport_specific.sata.valid = CTS_SATA_VALID_PM; xpt_action((union ccb *)&cts); path->device->protocol = PROTO_SATAPM; PROBE_SET_ACTION(softc, PROBE_PM_PID); } else if (sign == 0xc33c && done_ccb->ccb_h.target_id != 15) { path->device->protocol = PROTO_SEMB; PROBE_SET_ACTION(softc, PROBE_IDENTIFY_SES); } else if (sign == 0xeb14 && done_ccb->ccb_h.target_id != 15) { path->device->protocol = PROTO_SCSI; PROBE_SET_ACTION(softc, PROBE_IDENTIFY); } else { if (done_ccb->ccb_h.target_id != 15) { xpt_print(path, "Unexpected signature 0x%04x\n", sign); } goto device_fail; } xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } case PROBE_IDENTIFY: { struct ccb_pathinq cpi; int veto = 0; /* * Convert to host byte order, and fix the strings. */ ident_buf = &softc->ident_data; ata_param_fixup(ident_buf); /* * Allow others to veto this ATA disk attachment. This * is mainly used by VMs, whose disk controllers may * share the disks with the simulated ATA controllers. */ EVENTHANDLER_INVOKE(ada_probe_veto, path, ident_buf, &veto); if (veto) { goto device_fail; } /* Device may need spin-up before IDENTIFY become valid. */ if ((ident_buf->specconf == 0x37c8 || ident_buf->specconf == 0x738c) && ((ident_buf->config & ATA_RESP_INCOMPLETE) || softc->spinup == 0)) { PROBE_SET_ACTION(softc, PROBE_SPINUP); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } ident_buf = &path->device->ident_data; /* Check that it is the same device as we know. */ if ((periph->path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { if (bcmp(softc->ident_data.model, ident_buf->model, sizeof(ident_buf->model)) || bcmp(softc->ident_data.serial, ident_buf->serial, sizeof(ident_buf->serial))) { /* The device was replaced. */ changed = 2; xpt_async(AC_LOST_DEVICE, path, NULL); } else if (bcmp(&softc->ident_data, ident_buf, sizeof(*ident_buf))) { /* The device is the same, but has changed. */ changed = 1; } else { /* Nothing has changed. */ changed = 0; } } else { /* This is a new device. */ changed = 2; } if (changed != 0) bcopy(&softc->ident_data, ident_buf, sizeof(struct ata_params)); if (changed == 2) { /* Clean up from previous instance of this device */ if (path->device->serial_num != NULL) { free(path->device->serial_num, M_CAMXPT); path->device->serial_num = NULL; path->device->serial_num_len = 0; } if (path->device->device_id != NULL) { free(path->device->device_id, M_CAMXPT); path->device->device_id = NULL; path->device->device_id_len = 0; } path->device->serial_num = (u_int8_t *)malloc((sizeof(ident_buf->serial) + 1), M_CAMXPT, M_NOWAIT); if (path->device->serial_num != NULL) { bcopy(ident_buf->serial, path->device->serial_num, sizeof(ident_buf->serial)); path->device->serial_num[sizeof(ident_buf->serial)] = '\0'; path->device->serial_num_len = strlen(path->device->serial_num); } if (ident_buf->enabled.extension & ATA_SUPPORT_64BITWWN) { path->device->device_id = malloc(16, M_CAMXPT, M_NOWAIT); if (path->device->device_id != NULL) { path->device->device_id_len = 16; bcopy(&fake_device_id_hdr, path->device->device_id, 8); bcopy(ident_buf->wwn, path->device->device_id + 8, 8); ata_bswap(path->device->device_id + 8, 8); } } path->device->flags |= CAM_DEV_IDENTIFY_DATA_VALID; } if (changed == 1) xpt_async(AC_GETDEV_CHANGED, path, NULL); if (ident_buf->satacapabilities & ATA_SUPPORT_NCQ) { path->device->mintags = 2; path->device->maxtags = ATA_QUEUE_LEN(ident_buf->queue) + 1; } ata_find_quirk(path->device); if (path->device->mintags != 0 && path->bus->sim->max_tagged_dev_openings != 0) { /* Check if the SIM does not want queued commands. */ xpt_path_inq(&cpi, path); if (cpi.ccb_h.status == CAM_REQ_CMP && (cpi.hba_inquiry & PI_TAG_ABLE)) { /* Report SIM which tags are allowed. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.xport_specific.sata.tags = path->device->maxtags; cts.xport_specific.sata.valid = CTS_SATA_VALID_TAGS; xpt_action((union ccb *)&cts); } } ata_device_transport(path); if (changed == 2) aproberequestdefaultnegotiation(periph); PROBE_SET_ACTION(softc, PROBE_SETMODE); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } case PROBE_SPINUP: if (bootverbose) xpt_print(path, "Spin-up done\n"); softc->spinup = 1; PROBE_SET_ACTION(softc, PROBE_IDENTIFY); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; case PROBE_SETMODE: /* Set supported bits. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_SATA && cts.xport_specific.sata.valid & CTS_SATA_VALID_CAPS) caps = cts.xport_specific.sata.caps & CTS_SATA_CAPS_H; else if (path->device->transport == XPORT_ATA && cts.xport_specific.ata.valid & CTS_ATA_VALID_CAPS) caps = cts.xport_specific.ata.caps & CTS_ATA_CAPS_H; else caps = 0; if (path->device->transport == XPORT_SATA && ident_buf->satacapabilities != 0xffff) { if (ident_buf->satacapabilities & ATA_SUPPORT_IFPWRMNGTRCV) caps |= CTS_SATA_CAPS_D_PMREQ; if (ident_buf->satacapabilities & ATA_SUPPORT_HAPST) caps |= CTS_SATA_CAPS_D_APST; } /* Mask unwanted bits. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (path->device->transport == XPORT_SATA && cts.xport_specific.sata.valid & CTS_SATA_VALID_CAPS) caps &= cts.xport_specific.sata.caps; else if (path->device->transport == XPORT_ATA && cts.xport_specific.ata.valid & CTS_ATA_VALID_CAPS) caps &= cts.xport_specific.ata.caps; else caps = 0; /* * Remember what transport thinks about 48-bit DMA. If * capability information is not provided or transport is * SATA, we take support for granted. */ oif = path->device->inq_flags; if (!(path->device->inq_flags & SID_DMA) || (path->device->transport == XPORT_ATA && (cts.xport_specific.ata.valid & CTS_ATA_VALID_CAPS) && !(caps & CTS_ATA_CAPS_H_DMA48))) path->device->inq_flags &= ~SID_DMA48; else path->device->inq_flags |= SID_DMA48; if (path->device->inq_flags != oif) xpt_async(AC_GETDEV_CHANGED, path, NULL); /* Store result to SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; if (path->device->transport == XPORT_SATA) { cts.xport_specific.sata.caps = caps; cts.xport_specific.sata.valid = CTS_SATA_VALID_CAPS; } else { cts.xport_specific.ata.caps = caps; cts.xport_specific.ata.valid = CTS_ATA_VALID_CAPS; } xpt_action((union ccb *)&cts); softc->caps = caps; if (path->device->transport != XPORT_SATA) goto notsata; if ((ident_buf->satasupport & ATA_SUPPORT_IFPWRMNGT) && (!(softc->caps & CTS_SATA_CAPS_H_PMREQ)) != (!(ident_buf->sataenabled & ATA_SUPPORT_IFPWRMNGT))) { PROBE_SET_ACTION(softc, PROBE_SETPM); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } /* FALLTHROUGH */ case PROBE_SETPM: if (ident_buf->satacapabilities != 0xffff && (ident_buf->satacapabilities & ATA_SUPPORT_DAPST) && (!(softc->caps & CTS_SATA_CAPS_H_APST)) != (!(ident_buf->sataenabled & ATA_ENABLED_DAPST))) { PROBE_SET_ACTION(softc, PROBE_SETAPST); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } /* FALLTHROUGH */ case PROBE_SETAPST: if ((ident_buf->satasupport & ATA_SUPPORT_AUTOACTIVATE) && (!(softc->caps & CTS_SATA_CAPS_H_DMAAA)) != (!(ident_buf->sataenabled & ATA_SUPPORT_AUTOACTIVATE))) { PROBE_SET_ACTION(softc, PROBE_SETDMAAA); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } /* FALLTHROUGH */ case PROBE_SETDMAAA: if (path->device->protocol != PROTO_ATA && (ident_buf->satasupport & ATA_SUPPORT_ASYNCNOTIF) && (!(softc->caps & CTS_SATA_CAPS_H_AN)) != (!(ident_buf->sataenabled & ATA_SUPPORT_ASYNCNOTIF))) { PROBE_SET_ACTION(softc, PROBE_SETAN); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } /* FALLTHROUGH */ case PROBE_SETAN: notsata: if (path->device->protocol == PROTO_ATA) { PROBE_SET_ACTION(softc, PROBE_SET_MULTI); } else { PROBE_SET_ACTION(softc, PROBE_INQUIRY); } xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; case PROBE_SET_MULTI: if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); break; case PROBE_INQUIRY: case PROBE_FULL_INQUIRY: { u_int8_t periph_qual, len; path->device->flags |= CAM_DEV_INQUIRY_DATA_VALID; periph_qual = SID_QUAL(inq_buf); if (periph_qual != SID_QUAL_LU_CONNECTED && periph_qual != SID_QUAL_LU_OFFLINE) break; /* * We conservatively request only * SHORT_INQUIRY_LEN bytes of inquiry * information during our first try * at sending an INQUIRY. If the device * has more information to give, * perform a second request specifying * the amount of information the device * is willing to give. */ len = inq_buf->additional_length + offsetof(struct scsi_inquiry_data, additional_length) + 1; if (softc->action == PROBE_INQUIRY && len > SHORT_INQUIRY_LENGTH) { PROBE_SET_ACTION(softc, PROBE_FULL_INQUIRY); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } ata_device_transport(path); if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); break; } case PROBE_PM_PID: if ((path->device->flags & CAM_DEV_IDENTIFY_DATA_VALID) == 0) bzero(ident_buf, sizeof(*ident_buf)); softc->pm_pid = (done_ccb->ataio.res.lba_high << 24) + (done_ccb->ataio.res.lba_mid << 16) + (done_ccb->ataio.res.lba_low << 8) + done_ccb->ataio.res.sector_count; ((uint32_t *)ident_buf)[0] = softc->pm_pid; snprintf(ident_buf->model, sizeof(ident_buf->model), "Port Multiplier %08x", softc->pm_pid); PROBE_SET_ACTION(softc, PROBE_PM_PRV); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; case PROBE_PM_PRV: softc->pm_prv = (done_ccb->ataio.res.lba_high << 24) + (done_ccb->ataio.res.lba_mid << 16) + (done_ccb->ataio.res.lba_low << 8) + done_ccb->ataio.res.sector_count; ((uint32_t *)ident_buf)[1] = softc->pm_prv; snprintf(ident_buf->revision, sizeof(ident_buf->revision), "%04x", softc->pm_prv); path->device->flags |= CAM_DEV_IDENTIFY_DATA_VALID; ata_device_transport(path); if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) aproberequestdefaultnegotiation(periph); /* Set supported bits. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (cts.xport_specific.sata.valid & CTS_SATA_VALID_CAPS) caps = cts.xport_specific.sata.caps & CTS_SATA_CAPS_H; else caps = 0; /* All PMPs must support PM requests. */ caps |= CTS_SATA_CAPS_D_PMREQ; /* Mask unwanted bits. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (cts.xport_specific.sata.valid & CTS_SATA_VALID_CAPS) caps &= cts.xport_specific.sata.caps; else caps = 0; /* Remember what transport thinks about AEN. */ oif = path->device->inq_flags; if ((caps & CTS_SATA_CAPS_H_AN) && path->device->protocol != PROTO_ATA) path->device->inq_flags |= SID_AEN; else path->device->inq_flags &= ~SID_AEN; /* Store result to SIM. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.xport_specific.sata.caps = caps; cts.xport_specific.sata.valid = CTS_SATA_VALID_CAPS; xpt_action((union ccb *)&cts); softc->caps = caps; if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, path, done_ccb); } else { if (path->device->inq_flags != oif) xpt_async(AC_GETDEV_CHANGED, path, NULL); done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_SCSI_AEN, path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); break; case PROBE_IDENTIFY_SES: case PROBE_IDENTIFY_SAFTE: if ((periph->path->device->flags & CAM_DEV_UNCONFIGURED) == 0) { /* Check that it is the same device. */ if (bcmp(&softc->ident_data, ident_buf, 53)) { /* Device changed. */ changed = 2; xpt_async(AC_LOST_DEVICE, path, NULL); } else { bcopy(&softc->ident_data, ident_buf, sizeof(struct ata_params)); changed = 0; } } else changed = 2; if (changed) { bcopy(&softc->ident_data, ident_buf, sizeof(struct ata_params)); /* Clean up from previous instance of this device */ if (path->device->device_id != NULL) { free(path->device->device_id, M_CAMXPT); path->device->device_id = NULL; path->device->device_id_len = 0; } path->device->device_id = malloc(16, M_CAMXPT, M_NOWAIT); if (path->device->device_id != NULL) { path->device->device_id_len = 16; bcopy(&fake_device_id_hdr, path->device->device_id, 8); bcopy(((uint8_t*)ident_buf) + 2, path->device->device_id + 8, 8); } path->device->flags |= CAM_DEV_IDENTIFY_DATA_VALID; } ata_device_transport(path); if (changed) aproberequestdefaultnegotiation(periph); if (periph->path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); break; default: panic("aprobedone: invalid action state 0x%x\n", softc->action); } done: if (softc->restart) { softc->restart = 0; xpt_release_ccb(done_ccb); aprobeschedule(periph); goto out; } xpt_release_ccb(done_ccb); CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe completed\n")); while ((done_ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs))) { TAILQ_REMOVE(&softc->request_ccbs, &done_ccb->ccb_h, periph_links.tqe); done_ccb->ccb_h.status = found ? CAM_REQ_CMP : CAM_REQ_CMP_ERR; xpt_done(done_ccb); } /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ cam_release_devq(path, 0, 0, 0, FALSE); cam_periph_invalidate(periph); cam_periph_release_locked(periph); } static void aprobecleanup(struct cam_periph *periph) { free(periph->softc, M_CAMXPT); } static void ata_find_quirk(struct cam_ed *device) { struct ata_quirk_entry *quirk; caddr_t match; match = cam_quirkmatch((caddr_t)&device->ident_data, (caddr_t)ata_quirk_table, nitems(ata_quirk_table), sizeof(*ata_quirk_table), ata_identify_match); if (match == NULL) panic("xpt_find_quirk: device didn't match wildcard entry!!"); quirk = (struct ata_quirk_entry *)match; device->quirk = quirk; if (quirk->quirks & CAM_QUIRK_MAXTAGS) { device->mintags = quirk->mintags; device->maxtags = quirk->maxtags; } } typedef struct { union ccb *request_ccb; struct ccb_pathinq *cpi; int counter; } ata_scan_bus_info; /* * To start a scan, request_ccb is an XPT_SCAN_BUS ccb. * As the scan progresses, xpt_scan_bus is used as the * callback on completion function. */ static void ata_scan_bus(struct cam_periph *periph, union ccb *request_ccb) { struct cam_path *path; ata_scan_bus_info *scan_info; union ccb *work_ccb, *reset_ccb; struct mtx *mtx; cam_status status; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_scan_bus\n")); switch (request_ccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_SCAN_TGT: /* Find out the characteristics of the bus */ work_ccb = xpt_alloc_ccb_nowait(); if (work_ccb == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(request_ccb); return; } xpt_path_inq(&work_ccb->cpi, request_ccb->ccb_h.path); if (work_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = work_ccb->ccb_h.status; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } /* We may need to reset bus first, if we haven't done it yet. */ if ((work_ccb->cpi.hba_inquiry & (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE)) && !(work_ccb->cpi.hba_misc & PIM_NOBUSRESET) && !timevalisset(&request_ccb->ccb_h.path->bus->last_reset)) { reset_ccb = xpt_alloc_ccb_nowait(); if (reset_ccb == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } xpt_setup_ccb(&reset_ccb->ccb_h, request_ccb->ccb_h.path, CAM_PRIORITY_NONE); reset_ccb->ccb_h.func_code = XPT_RESET_BUS; xpt_action(reset_ccb); if (reset_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = reset_ccb->ccb_h.status; xpt_free_ccb(reset_ccb); xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } xpt_free_ccb(reset_ccb); } /* Save some state for use while we probe for devices */ scan_info = (ata_scan_bus_info *) malloc(sizeof(ata_scan_bus_info), M_CAMXPT, M_NOWAIT); if (scan_info == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } scan_info->request_ccb = request_ccb; scan_info->cpi = &work_ccb->cpi; /* If PM supported, probe it first. */ if (scan_info->cpi->hba_inquiry & PI_SATAPM) scan_info->counter = scan_info->cpi->max_target; else scan_info->counter = 0; work_ccb = xpt_alloc_ccb_nowait(); if (work_ccb == NULL) { free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(request_ccb); break; } mtx = xpt_path_mtx(scan_info->request_ccb->ccb_h.path); goto scan_next; case XPT_SCAN_LUN: work_ccb = request_ccb; /* Reuse the same CCB to query if a device was really found */ scan_info = (ata_scan_bus_info *)work_ccb->ccb_h.ppriv_ptr0; mtx = xpt_path_mtx(scan_info->request_ccb->ccb_h.path); mtx_lock(mtx); /* If there is PMP... */ if ((scan_info->cpi->hba_inquiry & PI_SATAPM) && (scan_info->counter == scan_info->cpi->max_target)) { if (work_ccb->ccb_h.status == CAM_REQ_CMP) { /* everything else will be probed by it */ /* Free the current request path- we're done with it. */ xpt_free_path(work_ccb->ccb_h.path); goto done; } else { struct ccb_trans_settings cts; /* Report SIM that PM is absent. */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, work_ccb->ccb_h.path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.xport_specific.sata.pm_present = 0; cts.xport_specific.sata.valid = CTS_SATA_VALID_PM; xpt_action((union ccb *)&cts); } } /* Free the current request path- we're done with it. */ xpt_free_path(work_ccb->ccb_h.path); if (scan_info->counter == ((scan_info->cpi->hba_inquiry & PI_SATAPM) ? 0 : scan_info->cpi->max_target)) { done: mtx_unlock(mtx); xpt_free_ccb(work_ccb); xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); break; } /* Take next device. Wrap from max (PMP) to 0. */ scan_info->counter = (scan_info->counter + 1 ) % (scan_info->cpi->max_target + 1); scan_next: status = xpt_create_path(&path, NULL, scan_info->request_ccb->ccb_h.path_id, scan_info->counter, 0); if (status != CAM_REQ_CMP) { if (request_ccb->ccb_h.func_code == XPT_SCAN_LUN) mtx_unlock(mtx); printf("xpt_scan_bus: xpt_create_path failed" " with status %#x, bus scan halted\n", status); xpt_free_ccb(work_ccb); xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = status; xpt_done(request_ccb); break; } xpt_setup_ccb(&work_ccb->ccb_h, path, scan_info->request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_SCAN_LUN; work_ccb->ccb_h.cbfcnp = ata_scan_bus; work_ccb->ccb_h.flags |= CAM_UNLOCKED; work_ccb->ccb_h.ppriv_ptr0 = scan_info; work_ccb->crcn.flags = scan_info->request_ccb->crcn.flags; mtx_unlock(mtx); if (request_ccb->ccb_h.func_code == XPT_SCAN_LUN) mtx = NULL; xpt_action(work_ccb); if (mtx != NULL) mtx_lock(mtx); break; default: break; } } static void ata_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *request_ccb) { struct ccb_pathinq cpi; cam_status status; struct cam_path *new_path; struct cam_periph *old_periph; int lock; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_scan_lun\n")); xpt_path_inq(&cpi, path); if (cpi.ccb_h.status != CAM_REQ_CMP) { if (request_ccb != NULL) { request_ccb->ccb_h.status = cpi.ccb_h.status; xpt_done(request_ccb); } return; } if (request_ccb == NULL) { request_ccb = xpt_alloc_ccb_nowait(); if (request_ccb == NULL) { xpt_print(path, "xpt_scan_lun: can't allocate CCB, " "can't continue\n"); return; } status = xpt_create_path(&new_path, NULL, path->bus->path_id, path->target->target_id, path->device->lun_id); if (status != CAM_REQ_CMP) { xpt_print(path, "xpt_scan_lun: can't create path, " "can't continue\n"); xpt_free_ccb(request_ccb); return; } xpt_setup_ccb(&request_ccb->ccb_h, new_path, CAM_PRIORITY_XPT); request_ccb->ccb_h.cbfcnp = axptscandone; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->crcn.flags = flags; } lock = (xpt_path_owned(path) == 0); if (lock) xpt_path_lock(path); if ((old_periph = cam_periph_find(path, "aprobe")) != NULL) { if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) { probe_softc *softc; softc = (probe_softc *)old_periph->softc; TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); softc->restart = 1; } else { request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; xpt_done(request_ccb); } } else { status = cam_periph_alloc(aproberegister, NULL, aprobecleanup, aprobestart, "aprobe", CAM_PERIPH_BIO, request_ccb->ccb_h.path, NULL, 0, request_ccb); if (status != CAM_REQ_CMP) { xpt_print(path, "xpt_scan_lun: cam_alloc_periph " "returned an error, can't continue probe\n"); request_ccb->ccb_h.status = status; xpt_done(request_ccb); } } if (lock) xpt_path_unlock(path); } static void axptscandone(struct cam_periph *periph, union ccb *done_ccb) { xpt_free_path(done_ccb->ccb_h.path); xpt_free_ccb(done_ccb); } static struct cam_ed * ata_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct ata_quirk_entry *quirk; struct cam_ed *device; device = xpt_alloc_device(bus, target, lun_id); if (device == NULL) return (NULL); /* * Take the default quirk entry until we have inquiry * data and can determine a better quirk to use. */ quirk = &ata_quirk_table[nitems(ata_quirk_table) - 1]; device->quirk = (void *)quirk; device->mintags = 0; device->maxtags = 0; bzero(&device->inq_data, sizeof(device->inq_data)); device->inq_flags = 0; device->queue_flags = 0; device->serial_num = NULL; device->serial_num_len = 0; return (device); } static void ata_device_transport(struct cam_path *path) { struct ccb_pathinq cpi; struct ccb_trans_settings cts; struct scsi_inquiry_data *inq_buf = NULL; struct ata_params *ident_buf = NULL; /* Get transport information from the SIM */ xpt_path_inq(&cpi, path); path->device->transport = cpi.transport; if ((path->device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0) inq_buf = &path->device->inq_data; if ((path->device->flags & CAM_DEV_IDENTIFY_DATA_VALID) != 0) ident_buf = &path->device->ident_data; if (path->device->protocol == PROTO_ATA) { path->device->protocol_version = ident_buf ? ata_version(ident_buf->version_major) : cpi.protocol_version; } else if (path->device->protocol == PROTO_SCSI) { path->device->protocol_version = inq_buf ? SID_ANSI_REV(inq_buf) : cpi.protocol_version; } path->device->transport_version = ident_buf ? ata_version(ident_buf->version_major) : cpi.transport_version; /* Tell the controller what we think */ bzero(&cts, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.transport = path->device->transport; cts.transport_version = path->device->transport_version; cts.protocol = path->device->protocol; cts.protocol_version = path->device->protocol_version; cts.proto_specific.valid = 0; if (ident_buf) { if (path->device->transport == XPORT_ATA) { cts.xport_specific.ata.atapi = (ident_buf->config == ATA_PROTO_CFA) ? 0 : ((ident_buf->config & ATA_PROTO_MASK) == ATA_PROTO_ATAPI_16) ? 16 : ((ident_buf->config & ATA_PROTO_MASK) == ATA_PROTO_ATAPI_12) ? 12 : 0; cts.xport_specific.ata.valid = CTS_ATA_VALID_ATAPI; } else { cts.xport_specific.sata.atapi = (ident_buf->config == ATA_PROTO_CFA) ? 0 : ((ident_buf->config & ATA_PROTO_MASK) == ATA_PROTO_ATAPI_16) ? 16 : ((ident_buf->config & ATA_PROTO_MASK) == ATA_PROTO_ATAPI_12) ? 12 : 0; cts.xport_specific.sata.valid = CTS_SATA_VALID_ATAPI; } } else cts.xport_specific.valid = 0; xpt_action((union ccb *)&cts); } static void ata_dev_advinfo(union ccb *start_ccb) { struct cam_ed *device; struct ccb_dev_advinfo *cdai; off_t amt; xpt_path_assert(start_ccb->ccb_h.path, MA_OWNED); start_ccb->ccb_h.status = CAM_REQ_INVALID; device = start_ccb->ccb_h.path->device; cdai = &start_ccb->cdai; switch(cdai->buftype) { case CDAI_TYPE_SCSI_DEVID: if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->device_id_len; if (device->device_id_len == 0) break; amt = device->device_id_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->device_id, amt); break; case CDAI_TYPE_SERIAL_NUM: if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->serial_num_len; if (device->serial_num_len == 0) break; amt = device->serial_num_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->serial_num, amt); break; case CDAI_TYPE_PHYS_PATH: if (cdai->flags & CDAI_FLAG_STORE) { if (device->physpath != NULL) free(device->physpath, M_CAMXPT); device->physpath_len = cdai->bufsiz; /* Clear existing buffer if zero length */ if (cdai->bufsiz == 0) break; device->physpath = malloc(cdai->bufsiz, M_CAMXPT, M_NOWAIT); if (device->physpath == NULL) { start_ccb->ccb_h.status = CAM_REQ_ABORTED; return; } memcpy(device->physpath, cdai->buf, cdai->bufsiz); } else { cdai->provsiz = device->physpath_len; if (device->physpath_len == 0) break; amt = device->physpath_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->physpath, amt); } break; default: return; } start_ccb->ccb_h.status = CAM_REQ_CMP; if (cdai->flags & CDAI_FLAG_STORE) { xpt_async(AC_ADVINFO_CHANGED, start_ccb->ccb_h.path, (void *)(uintptr_t)cdai->buftype); } } static void ata_action(union ccb *start_ccb) { + if (start_ccb->ccb_h.func_code != XPT_ATA_IO) { + KASSERT((start_ccb->ccb_h.alloc_flags & CAM_CCB_FROM_UMA) == 0, + ("%s: ccb %p, func_code %#x should not be allocated " + "from UMA zone\n", + __func__, start_ccb, start_ccb->ccb_h.func_code)); + } + switch (start_ccb->ccb_h.func_code) { case XPT_SET_TRAN_SETTINGS: { ata_set_transfer_settings(&start_ccb->cts, start_ccb->ccb_h.path, /*async_update*/FALSE); break; } case XPT_SCAN_BUS: case XPT_SCAN_TGT: ata_scan_bus(start_ccb->ccb_h.path->periph, start_ccb); break; case XPT_SCAN_LUN: ata_scan_lun(start_ccb->ccb_h.path->periph, start_ccb->ccb_h.path, start_ccb->crcn.flags, start_ccb); break; case XPT_GET_TRAN_SETTINGS: { ata_get_transfer_settings(&start_ccb->cts); break; } case XPT_SCSI_IO: { struct cam_ed *device; u_int maxlen = 0; device = start_ccb->ccb_h.path->device; if (device->protocol == PROTO_SCSI && (device->flags & CAM_DEV_IDENTIFY_DATA_VALID)) { uint16_t p = device->ident_data.config & ATA_PROTO_MASK; maxlen = (device->ident_data.config == ATA_PROTO_CFA) ? 0 : (p == ATA_PROTO_ATAPI_16) ? 16 : (p == ATA_PROTO_ATAPI_12) ? 12 : 0; } if (start_ccb->csio.cdb_len > maxlen) { start_ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(start_ccb); break; } xpt_action_default(start_ccb); break; } case XPT_DEV_ADVINFO: { ata_dev_advinfo(start_ccb); break; } default: xpt_action_default(start_ccb); break; } } static void ata_get_transfer_settings(struct ccb_trans_settings *cts) { struct ccb_trans_settings_ata *ata; struct ccb_trans_settings_scsi *scsi; struct cam_ed *device; device = cts->ccb_h.path->device; xpt_action_default((union ccb *)cts); if (cts->protocol == PROTO_UNKNOWN || cts->protocol == PROTO_UNSPECIFIED) { cts->protocol = device->protocol; cts->protocol_version = device->protocol_version; } if (cts->protocol == PROTO_ATA) { ata = &cts->proto_specific.ata; if ((ata->valid & CTS_ATA_VALID_TQ) == 0) { ata->valid |= CTS_ATA_VALID_TQ; if (cts->type == CTS_TYPE_USER_SETTINGS || (device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (device->inq_flags & SID_CmdQue) != 0) ata->flags |= CTS_ATA_FLAGS_TAG_ENB; } } if (cts->protocol == PROTO_SCSI) { scsi = &cts->proto_specific.scsi; if ((scsi->valid & CTS_SCSI_VALID_TQ) == 0) { scsi->valid |= CTS_SCSI_VALID_TQ; if (cts->type == CTS_TYPE_USER_SETTINGS || (device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (device->inq_flags & SID_CmdQue) != 0) scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; } } if (cts->transport == XPORT_UNKNOWN || cts->transport == XPORT_UNSPECIFIED) { cts->transport = device->transport; cts->transport_version = device->transport_version; } } static void ata_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_path *path, int async_update) { struct ccb_pathinq cpi; struct ccb_trans_settings_ata *ata; struct ccb_trans_settings_scsi *scsi; struct ata_params *ident_data; struct scsi_inquiry_data *inq_data; struct cam_ed *device; if (path == NULL || (device = path->device) == NULL) { cts->ccb_h.status = CAM_PATH_INVALID; xpt_done((union ccb *)cts); return; } if (cts->protocol == PROTO_UNKNOWN || cts->protocol == PROTO_UNSPECIFIED) { cts->protocol = device->protocol; cts->protocol_version = device->protocol_version; } if (cts->protocol_version == PROTO_VERSION_UNKNOWN || cts->protocol_version == PROTO_VERSION_UNSPECIFIED) cts->protocol_version = device->protocol_version; if (cts->protocol != device->protocol) { xpt_print(path, "Uninitialized Protocol %x:%x?\n", cts->protocol, device->protocol); cts->protocol = device->protocol; } if (cts->protocol_version > device->protocol_version) { if (bootverbose) { xpt_print(path, "Down reving Protocol " "Version from %d to %d?\n", cts->protocol_version, device->protocol_version); } cts->protocol_version = device->protocol_version; } if (cts->transport == XPORT_UNKNOWN || cts->transport == XPORT_UNSPECIFIED) { cts->transport = device->transport; cts->transport_version = device->transport_version; } if (cts->transport_version == XPORT_VERSION_UNKNOWN || cts->transport_version == XPORT_VERSION_UNSPECIFIED) cts->transport_version = device->transport_version; if (cts->transport != device->transport) { xpt_print(path, "Uninitialized Transport %x:%x?\n", cts->transport, device->transport); cts->transport = device->transport; } if (cts->transport_version > device->transport_version) { if (bootverbose) { xpt_print(path, "Down reving Transport " "Version from %d to %d?\n", cts->transport_version, device->transport_version); } cts->transport_version = device->transport_version; } ident_data = &device->ident_data; inq_data = &device->inq_data; if (cts->protocol == PROTO_ATA) ata = &cts->proto_specific.ata; else ata = NULL; if (cts->protocol == PROTO_SCSI) scsi = &cts->proto_specific.scsi; else scsi = NULL; xpt_path_inq(&cpi, path); /* Sanity checking */ if ((cpi.hba_inquiry & PI_TAG_ABLE) == 0 || (ata && (ident_data->satacapabilities & ATA_SUPPORT_NCQ) == 0) || (scsi && (INQ_DATA_TQ_ENABLED(inq_data)) == 0) || (device->queue_flags & SCP_QUEUE_DQUE) != 0 || (device->mintags == 0)) { /* * Can't tag on hardware that doesn't support tags, * doesn't have it enabled, or has broken tag support. */ if (ata) ata->flags &= ~CTS_ATA_FLAGS_TAG_ENB; if (scsi) scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; } /* Start/stop tags use. */ if (cts->type == CTS_TYPE_CURRENT_SETTINGS && ((ata && (ata->valid & CTS_ATA_VALID_TQ) != 0) || (scsi && (scsi->valid & CTS_SCSI_VALID_TQ) != 0))) { int nowt, newt = 0; nowt = ((device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (device->inq_flags & SID_CmdQue) != 0); if (ata) newt = (ata->flags & CTS_ATA_FLAGS_TAG_ENB) != 0; if (scsi) newt = (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0; if (newt && !nowt) { /* * Delay change to use tags until after a * few commands have gone to this device so * the controller has time to perform transfer * negotiations without tagged messages getting * in the way. */ device->tag_delay_count = CAM_TAG_DELAY_COUNT; device->flags |= CAM_DEV_TAG_AFTER_COUNT; } else if (nowt && !newt) xpt_stop_tags(path); } if (async_update == FALSE) xpt_action_default((union ccb *)cts); } /* * Handle any per-device event notifications that require action by the XPT. */ static void ata_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg) { cam_status status; struct cam_path newpath; /* * We only need to handle events for real devices. */ if (target->target_id == CAM_TARGET_WILDCARD || device->lun_id == CAM_LUN_WILDCARD) return; /* * We need our own path with wildcards expanded to * handle certain types of events. */ if ((async_code == AC_SENT_BDR) || (async_code == AC_BUS_RESET) || (async_code == AC_INQ_CHANGED)) status = xpt_compile_path(&newpath, NULL, bus->path_id, target->target_id, device->lun_id); else status = CAM_REQ_CMP_ERR; if (status == CAM_REQ_CMP) { if (async_code == AC_INQ_CHANGED) { /* * We've sent a start unit command, or * something similar to a device that * may have caused its inquiry data to * change. So we re-scan the device to * refresh the inquiry data for it. */ ata_scan_lun(newpath.periph, &newpath, CAM_EXPECT_INQ_CHANGE, NULL); } else { /* We need to reinitialize device after reset. */ ata_scan_lun(newpath.periph, &newpath, 0, NULL); } xpt_release_path(&newpath); } else if (async_code == AC_LOST_DEVICE && (device->flags & CAM_DEV_UNCONFIGURED) == 0) { device->flags |= CAM_DEV_UNCONFIGURED; xpt_release_device(device); } else if (async_code == AC_TRANSFER_NEG) { struct ccb_trans_settings *settings; struct cam_path path; settings = (struct ccb_trans_settings *)async_arg; xpt_compile_path(&path, NULL, bus->path_id, target->target_id, device->lun_id); ata_set_transfer_settings(settings, &path, /*async_update*/TRUE); xpt_release_path(&path); } } static void _ata_announce_periph(struct cam_periph *periph, struct ccb_trans_settings *cts, u_int *speed) { struct ccb_pathinq cpi; struct cam_path *path = periph->path; cam_periph_assert(periph, MA_OWNED); xpt_setup_ccb(&cts->ccb_h, path, CAM_PRIORITY_NORMAL); cts->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts->type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb*)cts); if ((cts->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) return; /* Ask the SIM for its base transfer speed */ xpt_path_inq(&cpi, path); /* Report connection speed */ *speed = cpi.base_transfer_speed; if (cts->transport == XPORT_ATA) { struct ccb_trans_settings_pata *pata = &cts->xport_specific.ata; if (pata->valid & CTS_ATA_VALID_MODE) *speed = ata_mode2speed(pata->mode); } if (cts->transport == XPORT_SATA) { struct ccb_trans_settings_sata *sata = &cts->xport_specific.sata; if (sata->valid & CTS_SATA_VALID_REVISION) *speed = ata_revision2speed(sata->revision); } } static void ata_announce_periph(struct cam_periph *periph) { struct ccb_trans_settings cts; u_int speed, mb; bzero(&cts, sizeof(cts)); _ata_announce_periph(periph, &cts, &speed); if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) return; mb = speed / 1000; if (mb > 0) printf("%s%d: %d.%03dMB/s transfers", periph->periph_name, periph->unit_number, mb, speed % 1000); else printf("%s%d: %dKB/s transfers", periph->periph_name, periph->unit_number, speed); /* Report additional information about connection */ if (cts.transport == XPORT_ATA) { struct ccb_trans_settings_pata *pata = &cts.xport_specific.ata; printf(" ("); if (pata->valid & CTS_ATA_VALID_MODE) printf("%s, ", ata_mode2string(pata->mode)); if ((pata->valid & CTS_ATA_VALID_ATAPI) && pata->atapi != 0) printf("ATAPI %dbytes, ", pata->atapi); if (pata->valid & CTS_ATA_VALID_BYTECOUNT) printf("PIO %dbytes", pata->bytecount); printf(")"); } if (cts.transport == XPORT_SATA) { struct ccb_trans_settings_sata *sata = &cts.xport_specific.sata; printf(" ("); if (sata->valid & CTS_SATA_VALID_REVISION) printf("SATA %d.x, ", sata->revision); else printf("SATA, "); if (sata->valid & CTS_SATA_VALID_MODE) printf("%s, ", ata_mode2string(sata->mode)); if ((sata->valid & CTS_ATA_VALID_ATAPI) && sata->atapi != 0) printf("ATAPI %dbytes, ", sata->atapi); if (sata->valid & CTS_SATA_VALID_BYTECOUNT) printf("PIO %dbytes", sata->bytecount); printf(")"); } printf("\n"); } static void ata_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb) { struct ccb_trans_settings cts; u_int speed, mb; _ata_announce_periph(periph, &cts, &speed); if ((cts.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) return; mb = speed / 1000; if (mb > 0) sbuf_printf(sb, "%s%d: %d.%03dMB/s transfers", periph->periph_name, periph->unit_number, mb, speed % 1000); else sbuf_printf(sb, "%s%d: %dKB/s transfers", periph->periph_name, periph->unit_number, speed); /* Report additional information about connection */ if (cts.transport == XPORT_ATA) { struct ccb_trans_settings_pata *pata = &cts.xport_specific.ata; sbuf_printf(sb, " ("); if (pata->valid & CTS_ATA_VALID_MODE) sbuf_printf(sb, "%s, ", ata_mode2string(pata->mode)); if ((pata->valid & CTS_ATA_VALID_ATAPI) && pata->atapi != 0) sbuf_printf(sb, "ATAPI %dbytes, ", pata->atapi); if (pata->valid & CTS_ATA_VALID_BYTECOUNT) sbuf_printf(sb, "PIO %dbytes", pata->bytecount); sbuf_printf(sb, ")"); } if (cts.transport == XPORT_SATA) { struct ccb_trans_settings_sata *sata = &cts.xport_specific.sata; sbuf_printf(sb, " ("); if (sata->valid & CTS_SATA_VALID_REVISION) sbuf_printf(sb, "SATA %d.x, ", sata->revision); else sbuf_printf(sb, "SATA, "); if (sata->valid & CTS_SATA_VALID_MODE) sbuf_printf(sb, "%s, ", ata_mode2string(sata->mode)); if ((sata->valid & CTS_ATA_VALID_ATAPI) && sata->atapi != 0) sbuf_printf(sb, "ATAPI %dbytes, ", sata->atapi); if (sata->valid & CTS_SATA_VALID_BYTECOUNT) sbuf_printf(sb, "PIO %dbytes", sata->bytecount); sbuf_printf(sb, ")"); } sbuf_printf(sb, "\n"); } static void ata_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb) { ata_print_ident_sbuf(&device->ident_data, sb); } static void ata_proto_announce(struct cam_ed *device) { ata_print_ident(&device->ident_data); } static void ata_proto_denounce(struct cam_ed *device) { ata_print_ident_short(&device->ident_data); } static void ata_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb) { ata_print_ident_short_sbuf(&device->ident_data, sb); } static void semb_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb) { semb_print_ident_sbuf((struct sep_identify_data *)&device->ident_data, sb); } static void semb_proto_announce(struct cam_ed *device) { semb_print_ident((struct sep_identify_data *)&device->ident_data); } static void semb_proto_denounce(struct cam_ed *device) { semb_print_ident_short((struct sep_identify_data *)&device->ident_data); } static void semb_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb) { semb_print_ident_short_sbuf((struct sep_identify_data *)&device->ident_data, sb); } static void ata_proto_debug_out(union ccb *ccb) { char cdb_str[(sizeof(struct ata_cmd) * 3) + 1]; if (ccb->ccb_h.func_code != XPT_ATA_IO) return; CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_CDB,("%s. ACB: %s\n", ata_op_string(&ccb->ataio.cmd), ata_cmd_string(&ccb->ataio.cmd, cdb_str, sizeof(cdb_str)))); } diff --git a/sys/cam/cam_ccb.h b/sys/cam/cam_ccb.h index 221b24a7c187..2545e40e192d 100644 --- a/sys/cam/cam_ccb.h +++ b/sys/cam/cam_ccb.h @@ -1,1544 +1,1556 @@ /*- * Data structures and definitions for CAM Control Blocks (CCBs). * * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997, 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _CAM_CAM_CCB_H #define _CAM_CAM_CCB_H 1 #include #include #include #include #ifndef _KERNEL #include #endif #include #include #include #include #include /* General allocation length definitions for CCB structures */ #define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */ #define VUHBALEN 14 /* Vendor Unique HBA length */ #define SIM_IDLEN 16 /* ASCII string len for SIM ID */ #define HBA_IDLEN 16 /* ASCII string len for HBA ID */ #define DEV_IDLEN 16 /* ASCII string len for device names */ #define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */ #define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */ /* Struct definitions for CAM control blocks */ /* Common CCB header */ + +/* CCB memory allocation flags */ +typedef enum { + CAM_CCB_FROM_UMA = 0x00000001,/* CCB from a periph UMA zone */ +} ccb_alloc_flags; + /* CAM CCB flags */ typedef enum { CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */ CAM_unused1 = 0x00000002, CAM_unused2 = 0x00000004, CAM_NEGOTIATE = 0x00000008,/* * Perform transport negotiation * with this command. */ CAM_DATA_ISPHYS = 0x00000010,/* Data type with physical addrs */ CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */ CAM_DIR_BOTH = 0x00000000,/* Data direction (00:IN/OUT) */ CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */ CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */ CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */ CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */ CAM_DATA_VADDR = 0x00000000,/* Data type (000:Virtual) */ CAM_DATA_PADDR = 0x00000010,/* Data type (001:Physical) */ CAM_DATA_SG = 0x00040000,/* Data type (010:sglist) */ CAM_DATA_SG_PADDR = 0x00040010,/* Data type (011:sglist phys) */ CAM_DATA_BIO = 0x00200000,/* Data type (100:bio) */ CAM_DATA_MASK = 0x00240010,/* Data type mask */ CAM_unused3 = 0x00000100, CAM_unused4 = 0x00000200, CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */ CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */ CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */ CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */ CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/ CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/ CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/ CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */ CAM_unused5 = 0x00080000, CAM_unused6 = 0x00100000, CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */ CAM_unused7 = 0x00800000, /* Phase cognizant mode flags */ CAM_unused8 = 0x01000000, CAM_unused9 = 0x02000000, CAM_unused10 = 0x04000000, CAM_unused11 = 0x08000000, CAM_unused12 = 0x10000000, CAM_unused13 = 0x20000000, CAM_unused14 = 0x40000000, /* Host target Mode flags */ CAM_SEND_SENSE = 0x08000000,/* Send sense data with status */ CAM_unused15 = 0x10000000, CAM_unused16 = 0x20000000, CAM_SEND_STATUS = 0x40000000,/* Send status after data phase */ CAM_UNLOCKED = 0x80000000 /* Call callback without lock. */ } ccb_flags; typedef enum { CAM_USER_DATA_ADDR = 0x00000002,/* Userspace data pointers */ CAM_SG_FORMAT_IOVEC = 0x00000004,/* iovec instead of busdma S/G*/ CAM_UNMAPPED_BUF = 0x00000008 /* use unmapped I/O */ } ccb_xflags; /* XPT Opcodes for xpt_action */ typedef enum { /* Function code flags are bits greater than 0xff */ XPT_FC_QUEUED = 0x100, /* Non-immediate function code */ XPT_FC_USER_CCB = 0x200, XPT_FC_XPT_ONLY = 0x400, /* Only for the transport layer device */ XPT_FC_DEV_QUEUED = 0x800 | XPT_FC_QUEUED, /* Passes through the device queues */ /* Common function commands: 0x00->0x0F */ XPT_NOOP = 0x00, /* Execute Nothing */ XPT_SCSI_IO = 0x01 | XPT_FC_DEV_QUEUED, /* Execute the requested I/O operation */ XPT_GDEV_TYPE = 0x02, /* Get type information for specified device */ XPT_GDEVLIST = 0x03, /* Get a list of peripheral devices */ XPT_PATH_INQ = 0x04, /* Path routing inquiry */ XPT_REL_SIMQ = 0x05, /* Release a frozen device queue */ XPT_SASYNC_CB = 0x06, /* Set Asynchronous Callback Parameters */ XPT_SDEV_TYPE = 0x07, /* Set device type information */ XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB | XPT_FC_XPT_ONLY, /* (Re)Scan the SCSI Bus */ XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY, /* Get EDT entries matching the given pattern */ XPT_DEBUG = 0x0a, /* Turn on debugging for a bus, target or lun */ XPT_PATH_STATS = 0x0b, /* Path statistics (error counts, etc.) */ XPT_GDEV_STATS = 0x0c, /* Device statistics (error counts, etc.) */ XPT_DEV_ADVINFO = 0x0e, /* Get/Set Device advanced information */ XPT_ASYNC = 0x0f | XPT_FC_QUEUED | XPT_FC_USER_CCB | XPT_FC_XPT_ONLY, /* Asynchronous event */ /* SCSI Control Functions: 0x10->0x1F */ XPT_ABORT = 0x10, /* Abort the specified CCB */ XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY, /* Reset the specified SCSI bus */ XPT_RESET_DEV = 0x12 | XPT_FC_DEV_QUEUED, /* Bus Device Reset the specified SCSI device */ XPT_TERM_IO = 0x13, /* Terminate the I/O process */ XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB | XPT_FC_XPT_ONLY, /* Scan Logical Unit */ XPT_GET_TRAN_SETTINGS = 0x15, /* * Get default/user transfer settings * for the target */ XPT_SET_TRAN_SETTINGS = 0x16, /* * Set transfer rate/width * negotiation settings */ XPT_CALC_GEOMETRY = 0x17, /* * Calculate the geometry parameters for * a device give the sector size and * volume size. */ XPT_ATA_IO = 0x18 | XPT_FC_DEV_QUEUED, /* Execute the requested ATA I/O operation */ XPT_GET_SIM_KNOB_OLD = 0x18, /* Compat only */ XPT_SET_SIM_KNOB = 0x19, /* * Set SIM specific knob values. */ XPT_GET_SIM_KNOB = 0x1a, /* * Get SIM specific knob values. */ XPT_SMP_IO = 0x1b | XPT_FC_DEV_QUEUED, /* Serial Management Protocol */ XPT_NVME_IO = 0x1c | XPT_FC_DEV_QUEUED, /* Execute the requested NVMe I/O operation */ XPT_MMC_IO = 0x1d | XPT_FC_DEV_QUEUED, /* Placeholder for MMC / SD / SDIO I/O stuff */ XPT_SCAN_TGT = 0x1e | XPT_FC_QUEUED | XPT_FC_USER_CCB | XPT_FC_XPT_ONLY, /* Scan Target */ XPT_NVME_ADMIN = 0x1f | XPT_FC_DEV_QUEUED, /* Execute the requested NVMe Admin operation */ /* HBA engine commands 0x20->0x2F */ XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY, /* HBA engine feature inquiry */ XPT_ENG_EXEC = 0x21 | XPT_FC_DEV_QUEUED, /* HBA execute engine request */ /* Target mode commands: 0x30->0x3F */ XPT_EN_LUN = 0x30, /* Enable LUN as a target */ XPT_TARGET_IO = 0x31 | XPT_FC_DEV_QUEUED, /* Execute target I/O request */ XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Accept Host Target Mode CDB */ XPT_CONT_TARGET_IO = 0x33 | XPT_FC_DEV_QUEUED, /* Continue Host Target I/O Connection */ XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Notify Host Target driver of event (obsolete) */ XPT_NOTIFY_ACK = 0x35, /* Acknowledgement of event (obsolete) */ XPT_IMMEDIATE_NOTIFY = 0x36 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Notify Host Target driver of event */ XPT_NOTIFY_ACKNOWLEDGE = 0x37 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Acknowledgement of event */ XPT_REPROBE_LUN = 0x38 | XPT_FC_QUEUED | XPT_FC_USER_CCB, /* Query device capacity and notify GEOM */ /* Vendor Unique codes: 0x80->0x8F */ XPT_VUNIQUE = 0x80 } xpt_opcode; #define XPT_FC_GROUP_MASK 0xF0 #define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK) #define XPT_FC_GROUP_COMMON 0x00 #define XPT_FC_GROUP_SCSI_CONTROL 0x10 #define XPT_FC_GROUP_HBA_ENGINE 0x20 #define XPT_FC_GROUP_TMODE 0x30 #define XPT_FC_GROUP_VENDOR_UNIQUE 0x80 #define XPT_FC_IS_DEV_QUEUED(ccb) \ (((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED) #define XPT_FC_IS_QUEUED(ccb) \ (((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0) typedef enum { PROTO_UNKNOWN, PROTO_UNSPECIFIED, PROTO_SCSI, /* Small Computer System Interface */ PROTO_ATA, /* AT Attachment */ PROTO_ATAPI, /* AT Attachment Packetized Interface */ PROTO_SATAPM, /* SATA Port Multiplier */ PROTO_SEMB, /* SATA Enclosure Management Bridge */ PROTO_NVME, /* NVME */ PROTO_MMCSD, /* MMC, SD, SDIO */ } cam_proto; typedef enum { XPORT_UNKNOWN, XPORT_UNSPECIFIED, XPORT_SPI, /* SCSI Parallel Interface */ XPORT_FC, /* Fiber Channel */ XPORT_SSA, /* Serial Storage Architecture */ XPORT_USB, /* Universal Serial Bus */ XPORT_PPB, /* Parallel Port Bus */ XPORT_ATA, /* AT Attachment */ XPORT_SAS, /* Serial Attached SCSI */ XPORT_SATA, /* Serial AT Attachment */ XPORT_ISCSI, /* iSCSI */ XPORT_SRP, /* SCSI RDMA Protocol */ XPORT_NVME, /* NVMe over PCIe */ XPORT_MMCSD, /* MMC, SD, SDIO card */ } cam_xport; #define XPORT_IS_NVME(t) ((t) == XPORT_NVME) #define XPORT_IS_ATA(t) ((t) == XPORT_ATA || (t) == XPORT_SATA) #define XPORT_IS_SCSI(t) ((t) != XPORT_UNKNOWN && \ (t) != XPORT_UNSPECIFIED && \ !XPORT_IS_ATA(t) && !XPORT_IS_NVME(t)) #define XPORT_DEVSTAT_TYPE(t) (XPORT_IS_ATA(t) ? DEVSTAT_TYPE_IF_IDE : \ XPORT_IS_SCSI(t) ? DEVSTAT_TYPE_IF_SCSI : \ DEVSTAT_TYPE_IF_OTHER) #define PROTO_VERSION_UNKNOWN (UINT_MAX - 1) #define PROTO_VERSION_UNSPECIFIED UINT_MAX #define XPORT_VERSION_UNKNOWN (UINT_MAX - 1) #define XPORT_VERSION_UNSPECIFIED UINT_MAX typedef union { LIST_ENTRY(ccb_hdr) le; SLIST_ENTRY(ccb_hdr) sle; TAILQ_ENTRY(ccb_hdr) tqe; STAILQ_ENTRY(ccb_hdr) stqe; } camq_entry; typedef union { void *ptr; u_long field; u_int8_t bytes[sizeof(uintptr_t)]; } ccb_priv_entry; typedef union { ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE]; u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)]; } ccb_ppriv_area; typedef union { ccb_priv_entry entries[CCB_SIM_PRIV_SIZE]; u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)]; } ccb_spriv_area; typedef struct { struct timeval *etime; uintptr_t sim_data; uintptr_t periph_data; } ccb_qos_area; struct ccb_hdr { cam_pinfo pinfo; /* Info for priority scheduling */ camq_entry xpt_links; /* For chaining in the XPT layer */ camq_entry sim_links; /* For chaining in the SIM layer */ camq_entry periph_links; /* For chaining in the type driver */ - u_int32_t retry_count; +#if BYTE_ORDER == LITTLE_ENDIAN + u_int16_t retry_count; + u_int16_t alloc_flags; /* ccb_alloc_flags */ +#else + u_int16_t alloc_flags; /* ccb_alloc_flags */ + u_int16_t retry_count; +#endif void (*cbfcnp)(struct cam_periph *, union ccb *); /* Callback on completion function */ xpt_opcode func_code; /* XPT function code */ u_int32_t status; /* Status returned by CAM subsystem */ struct cam_path *path; /* Compiled path for this ccb */ path_id_t path_id; /* Path ID for the request */ target_id_t target_id; /* Target device ID */ lun_id_t target_lun; /* Target LUN number */ u_int32_t flags; /* ccb_flags */ u_int32_t xflags; /* Extended flags */ ccb_ppriv_area periph_priv; ccb_spriv_area sim_priv; ccb_qos_area qos; u_int32_t timeout; /* Hard timeout value in mseconds */ struct timeval softtimeout; /* Soft timeout value in sec + usec */ }; /* Get Device Information CCB */ struct ccb_getdev { struct ccb_hdr ccb_h; cam_proto protocol; struct scsi_inquiry_data inq_data; struct ata_params ident_data; u_int8_t serial_num[252]; u_int8_t inq_flags; u_int8_t serial_num_len; void *padding[2]; }; /* Device Statistics CCB */ struct ccb_getdevstats { struct ccb_hdr ccb_h; int dev_openings; /* Space left for more work on device*/ int dev_active; /* Transactions running on the device */ int allocated; /* CCBs allocated for the device */ int queued; /* CCBs queued to be sent to the device */ int held; /* * CCBs held by peripheral drivers * for this device */ int maxtags; /* * Boundary conditions for number of * tagged operations */ int mintags; struct timeval last_reset; /* Time of last bus reset/loop init */ }; typedef enum { CAM_GDEVLIST_LAST_DEVICE, CAM_GDEVLIST_LIST_CHANGED, CAM_GDEVLIST_MORE_DEVS, CAM_GDEVLIST_ERROR } ccb_getdevlist_status_e; struct ccb_getdevlist { struct ccb_hdr ccb_h; char periph_name[DEV_IDLEN]; u_int32_t unit_number; unsigned int generation; u_int32_t index; ccb_getdevlist_status_e status; }; typedef enum { PERIPH_MATCH_NONE = 0x000, PERIPH_MATCH_PATH = 0x001, PERIPH_MATCH_TARGET = 0x002, PERIPH_MATCH_LUN = 0x004, PERIPH_MATCH_NAME = 0x008, PERIPH_MATCH_UNIT = 0x010, PERIPH_MATCH_ANY = 0x01f } periph_pattern_flags; struct periph_match_pattern { char periph_name[DEV_IDLEN]; u_int32_t unit_number; path_id_t path_id; target_id_t target_id; lun_id_t target_lun; periph_pattern_flags flags; }; typedef enum { DEV_MATCH_NONE = 0x000, DEV_MATCH_PATH = 0x001, DEV_MATCH_TARGET = 0x002, DEV_MATCH_LUN = 0x004, DEV_MATCH_INQUIRY = 0x008, DEV_MATCH_DEVID = 0x010, DEV_MATCH_ANY = 0x00f } dev_pattern_flags; struct device_id_match_pattern { uint8_t id_len; uint8_t id[256]; }; struct device_match_pattern { path_id_t path_id; target_id_t target_id; lun_id_t target_lun; dev_pattern_flags flags; union { struct scsi_static_inquiry_pattern inq_pat; struct device_id_match_pattern devid_pat; } data; }; typedef enum { BUS_MATCH_NONE = 0x000, BUS_MATCH_PATH = 0x001, BUS_MATCH_NAME = 0x002, BUS_MATCH_UNIT = 0x004, BUS_MATCH_BUS_ID = 0x008, BUS_MATCH_ANY = 0x00f } bus_pattern_flags; struct bus_match_pattern { path_id_t path_id; char dev_name[DEV_IDLEN]; u_int32_t unit_number; u_int32_t bus_id; bus_pattern_flags flags; }; union match_pattern { struct periph_match_pattern periph_pattern; struct device_match_pattern device_pattern; struct bus_match_pattern bus_pattern; }; typedef enum { DEV_MATCH_PERIPH, DEV_MATCH_DEVICE, DEV_MATCH_BUS } dev_match_type; struct dev_match_pattern { dev_match_type type; union match_pattern pattern; }; struct periph_match_result { char periph_name[DEV_IDLEN]; u_int32_t unit_number; path_id_t path_id; target_id_t target_id; lun_id_t target_lun; }; typedef enum { DEV_RESULT_NOFLAG = 0x00, DEV_RESULT_UNCONFIGURED = 0x01 } dev_result_flags; struct device_match_result { path_id_t path_id; target_id_t target_id; lun_id_t target_lun; cam_proto protocol; struct scsi_inquiry_data inq_data; struct ata_params ident_data; dev_result_flags flags; }; struct bus_match_result { path_id_t path_id; char dev_name[DEV_IDLEN]; u_int32_t unit_number; u_int32_t bus_id; }; union match_result { struct periph_match_result periph_result; struct device_match_result device_result; struct bus_match_result bus_result; }; struct dev_match_result { dev_match_type type; union match_result result; }; typedef enum { CAM_DEV_MATCH_LAST, CAM_DEV_MATCH_MORE, CAM_DEV_MATCH_LIST_CHANGED, CAM_DEV_MATCH_SIZE_ERROR, CAM_DEV_MATCH_ERROR } ccb_dev_match_status; typedef enum { CAM_DEV_POS_NONE = 0x000, CAM_DEV_POS_BUS = 0x001, CAM_DEV_POS_TARGET = 0x002, CAM_DEV_POS_DEVICE = 0x004, CAM_DEV_POS_PERIPH = 0x008, CAM_DEV_POS_PDPTR = 0x010, CAM_DEV_POS_TYPEMASK = 0xf00, CAM_DEV_POS_EDT = 0x100, CAM_DEV_POS_PDRV = 0x200 } dev_pos_type; struct ccb_dm_cookie { void *bus; void *target; void *device; void *periph; void *pdrv; }; struct ccb_dev_position { u_int generations[4]; #define CAM_BUS_GENERATION 0x00 #define CAM_TARGET_GENERATION 0x01 #define CAM_DEV_GENERATION 0x02 #define CAM_PERIPH_GENERATION 0x03 dev_pos_type position_type; struct ccb_dm_cookie cookie; }; struct ccb_dev_match { struct ccb_hdr ccb_h; ccb_dev_match_status status; u_int32_t num_patterns; u_int32_t pattern_buf_len; struct dev_match_pattern *patterns; u_int32_t num_matches; u_int32_t match_buf_len; struct dev_match_result *matches; struct ccb_dev_position pos; }; /* * Definitions for the path inquiry CCB fields. */ #define CAM_VERSION 0x19 /* Hex value for current version */ typedef enum { PI_MDP_ABLE = 0x80, /* Supports MDP message */ PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */ PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */ PI_SDTR_ABLE = 0x10, /* Supports SDTR message */ PI_LINKED_CDB = 0x08, /* Supports linked CDBs */ PI_SATAPM = 0x04, /* Supports SATA PM */ PI_TAG_ABLE = 0x02, /* Supports tag queue messages */ PI_SOFT_RST = 0x01 /* Supports soft reset alternative */ } pi_inqflag; typedef enum { PIT_PROCESSOR = 0x80, /* Target mode processor mode */ PIT_PHASE = 0x40, /* Target mode phase cog. mode */ PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */ PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */ PIT_GRP_6 = 0x08, /* Group 6 commands supported */ PIT_GRP_7 = 0x04 /* Group 7 commands supported */ } pi_tmflag; typedef enum { PIM_ATA_EXT = 0x200,/* ATA requests can understand ata_ext requests */ PIM_EXTLUNS = 0x100,/* 64bit extended LUNs supported */ PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */ PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */ PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */ PIM_NOBUSRESET = 0x10, /* User has disabled initial BUS RESET */ PIM_NO_6_BYTE = 0x08, /* Do not send 6-byte commands */ PIM_SEQSCAN = 0x04, /* Do bus scans sequentially, not in parallel */ PIM_UNMAPPED = 0x02, PIM_NOSCAN = 0x01 /* SIM does its own scanning */ } pi_miscflag; /* Path Inquiry CCB */ struct ccb_pathinq_settings_spi { u_int8_t ppr_options; }; struct ccb_pathinq_settings_fc { u_int64_t wwnn; /* world wide node name */ u_int64_t wwpn; /* world wide port name */ u_int32_t port; /* 24 bit port id, if known */ u_int32_t bitrate; /* Mbps */ }; struct ccb_pathinq_settings_sas { u_int32_t bitrate; /* Mbps */ }; #define NVME_DEV_NAME_LEN 52 struct ccb_pathinq_settings_nvme { uint32_t nsid; /* Namespace ID for this path */ uint32_t domain; uint8_t bus; uint8_t slot; uint8_t function; uint8_t extra; char dev_name[NVME_DEV_NAME_LEN]; /* nvme controller dev name for this device */ }; _Static_assert(sizeof(struct ccb_pathinq_settings_nvme) == 64, "ccb_pathinq_settings_nvme too big"); #define PATHINQ_SETTINGS_SIZE 128 struct ccb_pathinq { struct ccb_hdr ccb_h; u_int8_t version_num; /* Version number for the SIM/HBA */ u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */ u_int16_t target_sprt; /* Flags for target mode support */ u_int32_t hba_misc; /* Misc HBA features */ u_int16_t hba_eng_cnt; /* HBA engine count */ /* Vendor Unique capabilities */ u_int8_t vuhba_flags[VUHBALEN]; u_int32_t max_target; /* Maximum supported Target */ u_int32_t max_lun; /* Maximum supported Lun */ u_int32_t async_flags; /* Installed Async handlers */ path_id_t hpath_id; /* Highest Path ID in the subsystem */ target_id_t initiator_id; /* ID of the HBA on the SCSI bus */ char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */ char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */ char dev_name[DEV_IDLEN];/* Device name for SIM */ u_int32_t unit_number; /* Unit number for SIM */ u_int32_t bus_id; /* Bus ID for SIM */ u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */ cam_proto protocol; u_int protocol_version; cam_xport transport; u_int transport_version; union { struct ccb_pathinq_settings_spi spi; struct ccb_pathinq_settings_fc fc; struct ccb_pathinq_settings_sas sas; struct ccb_pathinq_settings_nvme nvme; char ccb_pathinq_settings_opaque[PATHINQ_SETTINGS_SIZE]; } xport_specific; u_int maxio; /* Max supported I/O size, in bytes. */ u_int16_t hba_vendor; /* HBA vendor ID */ u_int16_t hba_device; /* HBA device ID */ u_int16_t hba_subvendor; /* HBA subvendor ID */ u_int16_t hba_subdevice; /* HBA subdevice ID */ }; /* Path Statistics CCB */ struct ccb_pathstats { struct ccb_hdr ccb_h; struct timeval last_reset; /* Time of last bus reset/loop init */ }; typedef enum { SMP_FLAG_NONE = 0x00, SMP_FLAG_REQ_SG = 0x01, SMP_FLAG_RSP_SG = 0x02 } ccb_smp_pass_flags; /* * Serial Management Protocol CCB * XXX Currently the semantics for this CCB are that it is executed either * by the addressed device, or that device's parent (i.e. an expander for * any device on an expander) if the addressed device doesn't support SMP. * Later, once we have the ability to probe SMP-only devices and put them * in CAM's topology, the CCB will only be executed by the addressed device * if possible. */ struct ccb_smpio { struct ccb_hdr ccb_h; uint8_t *smp_request; int smp_request_len; uint16_t smp_request_sglist_cnt; uint8_t *smp_response; int smp_response_len; uint16_t smp_response_sglist_cnt; ccb_smp_pass_flags flags; }; typedef union { u_int8_t *sense_ptr; /* * Pointer to storage * for sense information */ /* Storage Area for sense information */ struct scsi_sense_data sense_buf; } sense_t; typedef union { u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */ /* Area for the CDB send */ u_int8_t cdb_bytes[IOCDBLEN]; } cdb_t; /* * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO * function codes. */ struct ccb_scsiio { struct ccb_hdr ccb_h; union ccb *next_ccb; /* Ptr for next CCB for action */ u_int8_t *req_map; /* Ptr to mapping info */ u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ u_int32_t dxfer_len; /* Data transfer length */ /* Autosense storage */ struct scsi_sense_data sense_data; u_int8_t sense_len; /* Number of bytes to autosense */ u_int8_t cdb_len; /* Number of bytes for the CDB */ u_int16_t sglist_cnt; /* Number of SG list entries */ u_int8_t scsi_status; /* Returned SCSI status */ u_int8_t sense_resid; /* Autosense resid length: 2's comp */ u_int32_t resid; /* Transfer residual length: 2's comp */ cdb_t cdb_io; /* Union for CDB bytes/pointer */ u_int8_t *msg_ptr; /* Pointer to the message buffer */ u_int16_t msg_len; /* Number of bytes for the Message */ u_int8_t tag_action; /* What to do for tag queueing */ /* * The tag action should be either the define below (to send a * non-tagged transaction) or one of the defined scsi tag messages * from scsi_message.h. */ #define CAM_TAG_ACTION_NONE 0x00 uint8_t priority; /* Command priority for SIMPLE tag */ u_int tag_id; /* tag id from initator (target mode) */ u_int init_id; /* initiator id of who selected */ #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) struct bio *bio; /* Associated bio */ #endif }; static __inline uint8_t * scsiio_cdb_ptr(struct ccb_scsiio *ccb) { return ((ccb->ccb_h.flags & CAM_CDB_POINTER) ? ccb->cdb_io.cdb_ptr : ccb->cdb_io.cdb_bytes); } /* * ATA I/O Request CCB used for the XPT_ATA_IO function code. */ struct ccb_ataio { struct ccb_hdr ccb_h; union ccb *next_ccb; /* Ptr for next CCB for action */ struct ata_cmd cmd; /* ATA command register set */ struct ata_res res; /* ATA result register set */ u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ u_int32_t dxfer_len; /* Data transfer length */ u_int32_t resid; /* Transfer residual length: 2's comp */ u_int8_t ata_flags; /* Flags for the rest of the buffer */ #define ATA_FLAG_AUX 0x1 #define ATA_FLAG_ICC 0x2 uint8_t icc; /* Isochronous Command Completion */ uint32_t aux; uint32_t unused; }; /* * MMC I/O Request CCB used for the XPT_MMC_IO function code. */ struct ccb_mmcio { struct ccb_hdr ccb_h; union ccb *next_ccb; /* Ptr for next CCB for action */ struct mmc_command cmd; struct mmc_command stop; }; struct ccb_accept_tio { struct ccb_hdr ccb_h; cdb_t cdb_io; /* Union for CDB bytes/pointer */ u_int8_t cdb_len; /* Number of bytes for the CDB */ u_int8_t tag_action; /* What to do for tag queueing */ u_int8_t sense_len; /* Number of bytes of Sense Data */ uint8_t priority; /* Command priority for SIMPLE tag */ u_int tag_id; /* tag id from initator (target mode) */ u_int init_id; /* initiator id of who selected */ struct scsi_sense_data sense_data; }; static __inline uint8_t * atio_cdb_ptr(struct ccb_accept_tio *ccb) { return ((ccb->ccb_h.flags & CAM_CDB_POINTER) ? ccb->cdb_io.cdb_ptr : ccb->cdb_io.cdb_bytes); } /* Release SIM Queue */ struct ccb_relsim { struct ccb_hdr ccb_h; u_int32_t release_flags; #define RELSIM_ADJUST_OPENINGS 0x01 #define RELSIM_RELEASE_AFTER_TIMEOUT 0x02 #define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04 #define RELSIM_RELEASE_AFTER_QEMPTY 0x08 u_int32_t openings; u_int32_t release_timeout; /* Abstract argument. */ u_int32_t qfrozen_cnt; }; /* * NVMe I/O Request CCB used for the XPT_NVME_IO and XPT_NVME_ADMIN function codes. */ struct ccb_nvmeio { struct ccb_hdr ccb_h; union ccb *next_ccb; /* Ptr for next CCB for action */ struct nvme_command cmd; /* NVME command, per NVME standard */ struct nvme_completion cpl; /* NVME completion, per NVME standard */ uint8_t *data_ptr; /* Ptr to the data buf/SG list */ uint32_t dxfer_len; /* Data transfer length */ uint16_t sglist_cnt; /* Number of SG list entries */ uint16_t unused; /* padding for removed uint32_t */ }; /* * Definitions for the asynchronous callback CCB fields. */ typedef enum { AC_UNIT_ATTENTION = 0x4000,/* Device reported UNIT ATTENTION */ AC_ADVINFO_CHANGED = 0x2000,/* Advance info might have changes */ AC_CONTRACT = 0x1000,/* A contractual callback */ AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */ AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */ AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */ AC_LOST_DEVICE = 0x100,/* A device went away */ AC_FOUND_DEVICE = 0x080,/* A new device was found */ AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */ AC_PATH_REGISTERED = 0x020,/* A new path has been registered */ AC_SENT_BDR = 0x010,/* A BDR message was sent to target */ AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */ AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */ AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */ } ac_code; typedef void ac_callback_t (void *softc, u_int32_t code, struct cam_path *path, void *args); /* * Generic Asynchronous callbacks. * * Generic arguments passed bac which are then interpreted between a per-system * contract number. */ #define AC_CONTRACT_DATA_MAX (128 - sizeof (u_int64_t)) struct ac_contract { u_int64_t contract_number; u_int8_t contract_data[AC_CONTRACT_DATA_MAX]; }; #define AC_CONTRACT_DEV_CHG 1 struct ac_device_changed { u_int64_t wwpn; u_int32_t port; target_id_t target; u_int8_t arrived; }; /* Set Asynchronous Callback CCB */ struct ccb_setasync { struct ccb_hdr ccb_h; u_int32_t event_enable; /* Async Event enables */ ac_callback_t *callback; void *callback_arg; }; /* Set Device Type CCB */ struct ccb_setdev { struct ccb_hdr ccb_h; u_int8_t dev_type; /* Value for dev type field in EDT */ }; /* SCSI Control Functions */ /* Abort XPT request CCB */ struct ccb_abort { struct ccb_hdr ccb_h; union ccb *abort_ccb; /* Pointer to CCB to abort */ }; /* Reset SCSI Bus CCB */ struct ccb_resetbus { struct ccb_hdr ccb_h; }; /* Reset SCSI Device CCB */ struct ccb_resetdev { struct ccb_hdr ccb_h; }; /* Terminate I/O Process Request CCB */ struct ccb_termio { struct ccb_hdr ccb_h; union ccb *termio_ccb; /* Pointer to CCB to terminate */ }; typedef enum { CTS_TYPE_CURRENT_SETTINGS, CTS_TYPE_USER_SETTINGS } cts_type; struct ccb_trans_settings_scsi { u_int valid; /* Which fields to honor */ #define CTS_SCSI_VALID_TQ 0x01 u_int flags; #define CTS_SCSI_FLAGS_TAG_ENB 0x01 }; struct ccb_trans_settings_ata { u_int valid; /* Which fields to honor */ #define CTS_ATA_VALID_TQ 0x01 u_int flags; #define CTS_ATA_FLAGS_TAG_ENB 0x01 }; struct ccb_trans_settings_spi { u_int valid; /* Which fields to honor */ #define CTS_SPI_VALID_SYNC_RATE 0x01 #define CTS_SPI_VALID_SYNC_OFFSET 0x02 #define CTS_SPI_VALID_BUS_WIDTH 0x04 #define CTS_SPI_VALID_DISC 0x08 #define CTS_SPI_VALID_PPR_OPTIONS 0x10 u_int flags; #define CTS_SPI_FLAGS_DISC_ENB 0x01 u_int sync_period; u_int sync_offset; u_int bus_width; u_int ppr_options; }; struct ccb_trans_settings_fc { u_int valid; /* Which fields to honor */ #define CTS_FC_VALID_WWNN 0x8000 #define CTS_FC_VALID_WWPN 0x4000 #define CTS_FC_VALID_PORT 0x2000 #define CTS_FC_VALID_SPEED 0x1000 u_int64_t wwnn; /* world wide node name */ u_int64_t wwpn; /* world wide port name */ u_int32_t port; /* 24 bit port id, if known */ u_int32_t bitrate; /* Mbps */ }; struct ccb_trans_settings_sas { u_int valid; /* Which fields to honor */ #define CTS_SAS_VALID_SPEED 0x1000 u_int32_t bitrate; /* Mbps */ }; struct ccb_trans_settings_pata { u_int valid; /* Which fields to honor */ #define CTS_ATA_VALID_MODE 0x01 #define CTS_ATA_VALID_BYTECOUNT 0x02 #define CTS_ATA_VALID_ATAPI 0x20 #define CTS_ATA_VALID_CAPS 0x40 int mode; /* Mode */ u_int bytecount; /* Length of PIO transaction */ u_int atapi; /* Length of ATAPI CDB */ u_int caps; /* Device and host SATA caps. */ #define CTS_ATA_CAPS_H 0x0000ffff #define CTS_ATA_CAPS_H_DMA48 0x00000001 /* 48-bit DMA */ #define CTS_ATA_CAPS_D 0xffff0000 }; struct ccb_trans_settings_sata { u_int valid; /* Which fields to honor */ #define CTS_SATA_VALID_MODE 0x01 #define CTS_SATA_VALID_BYTECOUNT 0x02 #define CTS_SATA_VALID_REVISION 0x04 #define CTS_SATA_VALID_PM 0x08 #define CTS_SATA_VALID_TAGS 0x10 #define CTS_SATA_VALID_ATAPI 0x20 #define CTS_SATA_VALID_CAPS 0x40 int mode; /* Legacy PATA mode */ u_int bytecount; /* Length of PIO transaction */ int revision; /* SATA revision */ u_int pm_present; /* PM is present (XPT->SIM) */ u_int tags; /* Number of allowed tags */ u_int atapi; /* Length of ATAPI CDB */ u_int caps; /* Device and host SATA caps. */ #define CTS_SATA_CAPS_H 0x0000ffff #define CTS_SATA_CAPS_H_PMREQ 0x00000001 #define CTS_SATA_CAPS_H_APST 0x00000002 #define CTS_SATA_CAPS_H_DMAAA 0x00000010 /* Auto-activation */ #define CTS_SATA_CAPS_H_AN 0x00000020 /* Async. notification */ #define CTS_SATA_CAPS_D 0xffff0000 #define CTS_SATA_CAPS_D_PMREQ 0x00010000 #define CTS_SATA_CAPS_D_APST 0x00020000 }; struct ccb_trans_settings_nvme { u_int valid; /* Which fields to honor */ #define CTS_NVME_VALID_SPEC 0x01 #define CTS_NVME_VALID_CAPS 0x02 #define CTS_NVME_VALID_LINK 0x04 uint32_t spec; /* NVMe spec implemented -- same as vs register */ uint32_t max_xfer; /* Max transfer size (0 -> unlimited */ uint32_t caps; uint8_t lanes; /* Number of PCIe lanes */ uint8_t speed; /* PCIe generation for each lane */ uint8_t max_lanes; /* Number of PCIe lanes */ uint8_t max_speed; /* PCIe generation for each lane */ }; #include struct ccb_trans_settings_mmc { struct mmc_ios ios; #define MMC_CLK (1 << 1) #define MMC_VDD (1 << 2) #define MMC_CS (1 << 3) #define MMC_BW (1 << 4) #define MMC_PM (1 << 5) #define MMC_BT (1 << 6) #define MMC_BM (1 << 7) #define MMC_VCCQ (1 << 8) uint32_t ios_valid; /* The folowing is used only for GET_TRAN_SETTINGS */ uint32_t host_ocr; int host_f_min; int host_f_max; /* Copied from sys/dev/mmc/bridge.h */ #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can do 4-bit data transfers */ #define MMC_CAP_8_BIT_DATA (1 << 1) /* Can do 8-bit data transfers */ #define MMC_CAP_HSPEED (1 << 2) /* Can do High Speed transfers */ #define MMC_CAP_BOOT_NOACC (1 << 4) /* Cannot access boot partitions */ #define MMC_CAP_WAIT_WHILE_BUSY (1 << 5) /* Host waits for busy responses */ #define MMC_CAP_UHS_SDR12 (1 << 6) /* Can do UHS SDR12 */ #define MMC_CAP_UHS_SDR25 (1 << 7) /* Can do UHS SDR25 */ #define MMC_CAP_UHS_SDR50 (1 << 8) /* Can do UHS SDR50 */ #define MMC_CAP_UHS_SDR104 (1 << 9) /* Can do UHS SDR104 */ #define MMC_CAP_UHS_DDR50 (1 << 10) /* Can do UHS DDR50 */ #define MMC_CAP_MMC_DDR52_120 (1 << 11) /* Can do eMMC DDR52 at 1.2 V */ #define MMC_CAP_MMC_DDR52_180 (1 << 12) /* Can do eMMC DDR52 at 1.8 V */ #define MMC_CAP_MMC_DDR52 (MMC_CAP_MMC_DDR52_120 | MMC_CAP_MMC_DDR52_180) #define MMC_CAP_MMC_HS200_120 (1 << 13) /* Can do eMMC HS200 at 1.2 V */ #define MMC_CAP_MMC_HS200_180 (1 << 14) /* Can do eMMC HS200 at 1.8 V */ #define MMC_CAP_MMC_HS200 (MMC_CAP_MMC_HS200_120| MMC_CAP_MMC_HS200_180) #define MMC_CAP_MMC_HS400_120 (1 << 15) /* Can do eMMC HS400 at 1.2 V */ #define MMC_CAP_MMC_HS400_180 (1 << 16) /* Can do eMMC HS400 at 1.8 V */ #define MMC_CAP_MMC_HS400 (MMC_CAP_MMC_HS400_120 | MMC_CAP_MMC_HS400_180) #define MMC_CAP_MMC_HSX00_120 (MMC_CAP_MMC_HS200_120 | MMC_CAP_MMC_HS400_120) #define MMC_CAP_MMC_ENH_STROBE (1 << 17) /* Can do eMMC Enhanced Strobe */ #define MMC_CAP_SIGNALING_120 (1 << 18) /* Can do signaling at 1.2 V */ #define MMC_CAP_SIGNALING_180 (1 << 19) /* Can do signaling at 1.8 V */ #define MMC_CAP_SIGNALING_330 (1 << 20) /* Can do signaling at 3.3 V */ #define MMC_CAP_DRIVER_TYPE_A (1 << 21) /* Can do Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 22) /* Can do Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 23) /* Can do Driver Type D */ uint32_t host_caps; uint32_t host_max_data; }; /* Get/Set transfer rate/width/disconnection/tag queueing settings */ struct ccb_trans_settings { struct ccb_hdr ccb_h; cts_type type; /* Current or User settings */ cam_proto protocol; u_int protocol_version; cam_xport transport; u_int transport_version; union { u_int valid; /* Which fields to honor */ struct ccb_trans_settings_ata ata; struct ccb_trans_settings_scsi scsi; struct ccb_trans_settings_nvme nvme; struct ccb_trans_settings_mmc mmc; } proto_specific; union { u_int valid; /* Which fields to honor */ struct ccb_trans_settings_spi spi; struct ccb_trans_settings_fc fc; struct ccb_trans_settings_sas sas; struct ccb_trans_settings_pata ata; struct ccb_trans_settings_sata sata; struct ccb_trans_settings_nvme nvme; } xport_specific; }; /* * Calculate the geometry parameters for a device * give the block size and volume size in blocks. */ struct ccb_calc_geometry { struct ccb_hdr ccb_h; u_int32_t block_size; u_int64_t volume_size; u_int32_t cylinders; u_int8_t heads; u_int8_t secs_per_track; }; /* * Set or get SIM (and transport) specific knobs */ #define KNOB_VALID_ADDRESS 0x1 #define KNOB_VALID_ROLE 0x2 #define KNOB_ROLE_NONE 0x0 #define KNOB_ROLE_INITIATOR 0x1 #define KNOB_ROLE_TARGET 0x2 #define KNOB_ROLE_BOTH 0x3 struct ccb_sim_knob_settings_spi { u_int valid; u_int initiator_id; u_int role; }; struct ccb_sim_knob_settings_fc { u_int valid; u_int64_t wwnn; /* world wide node name */ u_int64_t wwpn; /* world wide port name */ u_int role; }; struct ccb_sim_knob_settings_sas { u_int valid; u_int64_t wwnn; /* world wide node name */ u_int role; }; #define KNOB_SETTINGS_SIZE 128 struct ccb_sim_knob { struct ccb_hdr ccb_h; union { u_int valid; /* Which fields to honor */ struct ccb_sim_knob_settings_spi spi; struct ccb_sim_knob_settings_fc fc; struct ccb_sim_knob_settings_sas sas; char pad[KNOB_SETTINGS_SIZE]; } xport_specific; }; /* * Rescan the given bus, or bus/target/lun */ struct ccb_rescan { struct ccb_hdr ccb_h; cam_flags flags; }; /* * Turn on debugging for the given bus, bus/target, or bus/target/lun. */ struct ccb_debug { struct ccb_hdr ccb_h; cam_debug_flags flags; }; /* Target mode structures. */ struct ccb_en_lun { struct ccb_hdr ccb_h; u_int16_t grp6_len; /* Group 6 VU CDB length */ u_int16_t grp7_len; /* Group 7 VU CDB length */ u_int8_t enable; }; /* old, barely used immediate notify, binary compatibility */ struct ccb_immed_notify { struct ccb_hdr ccb_h; struct scsi_sense_data sense_data; u_int8_t sense_len; /* Number of bytes in sense buffer */ u_int8_t initiator_id; /* Id of initiator that selected */ u_int8_t message_args[7]; /* Message Arguments */ }; struct ccb_notify_ack { struct ccb_hdr ccb_h; u_int16_t seq_id; /* Sequence identifier */ u_int8_t event; /* Event flags */ }; struct ccb_immediate_notify { struct ccb_hdr ccb_h; u_int tag_id; /* Tag for immediate notify */ u_int seq_id; /* Tag for target of notify */ u_int initiator_id; /* Initiator Identifier */ u_int arg; /* Function specific */ }; struct ccb_notify_acknowledge { struct ccb_hdr ccb_h; u_int tag_id; /* Tag for immediate notify */ u_int seq_id; /* Tar for target of notify */ u_int initiator_id; /* Initiator Identifier */ u_int arg; /* Response information */ /* * Lower byte of arg is one of RESPONSE CODE values defined below * (subset of response codes from SPL-4 and FCP-4 specifications), * upper 3 bytes is code-specific ADDITIONAL RESPONSE INFORMATION. */ #define CAM_RSP_TMF_COMPLETE 0x00 #define CAM_RSP_TMF_REJECTED 0x04 #define CAM_RSP_TMF_FAILED 0x05 #define CAM_RSP_TMF_SUCCEEDED 0x08 #define CAM_RSP_TMF_INCORRECT_LUN 0x09 }; /* HBA engine structures. */ typedef enum { EIT_BUFFER, /* Engine type: buffer memory */ EIT_LOSSLESS, /* Engine type: lossless compression */ EIT_LOSSY, /* Engine type: lossy compression */ EIT_ENCRYPT /* Engine type: encryption */ } ei_type; typedef enum { EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */ EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */ EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */ EAD_LZ2V2 /* Engine algorithm ID: LZ2 var.2 */ } ei_algo; struct ccb_eng_inq { struct ccb_hdr ccb_h; u_int16_t eng_num; /* The engine number for this inquiry */ ei_type eng_type; /* Returned engine type */ ei_algo eng_algo; /* Returned engine algorithm type */ u_int32_t eng_memeory; /* Returned engine memory size */ }; struct ccb_eng_exec { /* This structure must match SCSIIO size */ struct ccb_hdr ccb_h; u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */ u_int8_t *req_map; /* Ptr for mapping info on the req. */ u_int8_t *data_ptr; /* Pointer to the data buf/SG list */ u_int32_t dxfer_len; /* Data transfer length */ u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */ u_int16_t sglist_cnt; /* Num of scatter gather list entries */ u_int32_t dmax_len; /* Destination data maximum length */ u_int32_t dest_len; /* Destination data length */ int32_t src_resid; /* Source residual length: 2's comp */ u_int32_t timeout; /* Timeout value */ u_int16_t eng_num; /* Engine number for this request */ u_int16_t vu_flags; /* Vendor Unique flags */ }; /* * Definitions for the timeout field in the SCSI I/O CCB. */ #define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */ #define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */ #define CAM_SUCCESS 0 /* For signaling general success */ #define CAM_FAILURE 1 /* For signaling general failure */ #define CAM_FALSE 0 #define CAM_TRUE 1 #define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */ /* * CCB for working with advanced device information. This operates in a fashion * similar to XPT_GDEV_TYPE. Specify the target in ccb_h, the buffer * type requested, and provide a buffer size/buffer to write to. If the * buffer is too small, provsiz will be larger than bufsiz. */ struct ccb_dev_advinfo { struct ccb_hdr ccb_h; uint32_t flags; #define CDAI_FLAG_NONE 0x0 /* No flags set */ #define CDAI_FLAG_STORE 0x1 /* If set, action becomes store */ uint32_t buftype; /* IN: Type of data being requested */ /* NB: buftype is interpreted on a per-transport basis */ #define CDAI_TYPE_SCSI_DEVID 1 #define CDAI_TYPE_SERIAL_NUM 2 #define CDAI_TYPE_PHYS_PATH 3 #define CDAI_TYPE_RCAPLONG 4 #define CDAI_TYPE_EXT_INQ 5 #define CDAI_TYPE_NVME_CNTRL 6 /* NVMe Identify Controller data */ #define CDAI_TYPE_NVME_NS 7 /* NVMe Identify Namespace data */ #define CDAI_TYPE_MMC_PARAMS 8 /* MMC/SD ident */ off_t bufsiz; /* IN: Size of external buffer */ #define CAM_SCSI_DEVID_MAXLEN 65536 /* length in buffer is an uint16_t */ off_t provsiz; /* OUT: Size required/used */ uint8_t *buf; /* IN/OUT: Buffer for requested data */ }; /* * CCB for sending async events */ struct ccb_async { struct ccb_hdr ccb_h; uint32_t async_code; off_t async_arg_size; void *async_arg_ptr; }; /* * Union of all CCB types for kernel space allocation. This union should * never be used for manipulating CCBs - its only use is for the allocation * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc * and the argument to xpt_ccb_free. */ union ccb { struct ccb_hdr ccb_h; /* For convenience */ struct ccb_scsiio csio; struct ccb_getdev cgd; struct ccb_getdevlist cgdl; struct ccb_pathinq cpi; struct ccb_relsim crs; struct ccb_setasync csa; struct ccb_setdev csd; struct ccb_pathstats cpis; struct ccb_getdevstats cgds; struct ccb_dev_match cdm; struct ccb_trans_settings cts; struct ccb_calc_geometry ccg; struct ccb_sim_knob knob; struct ccb_abort cab; struct ccb_resetbus crb; struct ccb_resetdev crd; struct ccb_termio tio; struct ccb_accept_tio atio; struct ccb_scsiio ctio; struct ccb_en_lun cel; struct ccb_immed_notify cin; struct ccb_notify_ack cna; struct ccb_immediate_notify cin1; struct ccb_notify_acknowledge cna2; struct ccb_eng_inq cei; struct ccb_eng_exec cee; struct ccb_smpio smpio; struct ccb_rescan crcn; struct ccb_debug cdbg; struct ccb_ataio ataio; struct ccb_dev_advinfo cdai; struct ccb_async casync; struct ccb_nvmeio nvmeio; struct ccb_mmcio mmcio; }; #define CCB_CLEAR_ALL_EXCEPT_HDR(ccbp) \ bzero((char *)(ccbp) + sizeof((ccbp)->ccb_h), \ sizeof(*(ccbp)) - sizeof((ccbp)->ccb_h)) __BEGIN_DECLS static __inline void cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int8_t tag_action, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, u_int8_t cdb_len, u_int32_t timeout) { csio->ccb_h.func_code = XPT_SCSI_IO; csio->ccb_h.flags = flags; csio->ccb_h.xflags = 0; csio->ccb_h.retry_count = retries; csio->ccb_h.cbfcnp = cbfcnp; csio->ccb_h.timeout = timeout; csio->data_ptr = data_ptr; csio->dxfer_len = dxfer_len; csio->sense_len = sense_len; csio->cdb_len = cdb_len; csio->tag_action = tag_action; csio->priority = 0; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) csio->bio = NULL; #endif } static __inline void cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int tag_action, u_int tag_id, u_int init_id, u_int scsi_status, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int32_t timeout) { csio->ccb_h.func_code = XPT_CONT_TARGET_IO; csio->ccb_h.flags = flags; csio->ccb_h.xflags = 0; csio->ccb_h.retry_count = retries; csio->ccb_h.cbfcnp = cbfcnp; csio->ccb_h.timeout = timeout; csio->data_ptr = data_ptr; csio->dxfer_len = dxfer_len; csio->scsi_status = scsi_status; csio->tag_action = tag_action; csio->priority = 0; csio->tag_id = tag_id; csio->init_id = init_id; } static __inline void cam_fill_ataio(struct ccb_ataio *ataio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int tag_action __unused, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int32_t timeout) { ataio->ccb_h.func_code = XPT_ATA_IO; ataio->ccb_h.flags = flags; ataio->ccb_h.retry_count = retries; ataio->ccb_h.cbfcnp = cbfcnp; ataio->ccb_h.timeout = timeout; ataio->data_ptr = data_ptr; ataio->dxfer_len = dxfer_len; ataio->ata_flags = 0; } static __inline void cam_fill_smpio(struct ccb_smpio *smpio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint32_t flags, uint8_t *smp_request, int smp_request_len, uint8_t *smp_response, int smp_response_len, uint32_t timeout) { #ifdef _KERNEL KASSERT((flags & CAM_DIR_MASK) == CAM_DIR_BOTH, ("direction != CAM_DIR_BOTH")); KASSERT((smp_request != NULL) && (smp_response != NULL), ("need valid request and response buffers")); KASSERT((smp_request_len != 0) && (smp_response_len != 0), ("need non-zero request and response lengths")); #endif /*_KERNEL*/ smpio->ccb_h.func_code = XPT_SMP_IO; smpio->ccb_h.flags = flags; smpio->ccb_h.retry_count = retries; smpio->ccb_h.cbfcnp = cbfcnp; smpio->ccb_h.timeout = timeout; smpio->smp_request = smp_request; smpio->smp_request_len = smp_request_len; smpio->smp_response = smp_response; smpio->smp_response_len = smp_response_len; } static __inline void cam_fill_mmcio(struct ccb_mmcio *mmcio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint32_t flags, uint32_t mmc_opcode, uint32_t mmc_arg, uint32_t mmc_flags, struct mmc_data *mmc_d, uint32_t timeout) { mmcio->ccb_h.func_code = XPT_MMC_IO; mmcio->ccb_h.flags = flags; mmcio->ccb_h.retry_count = retries; mmcio->ccb_h.cbfcnp = cbfcnp; mmcio->ccb_h.timeout = timeout; mmcio->cmd.opcode = mmc_opcode; mmcio->cmd.arg = mmc_arg; mmcio->cmd.flags = mmc_flags; mmcio->stop.opcode = 0; mmcio->stop.arg = 0; mmcio->stop.flags = 0; if (mmc_d != NULL) { mmcio->cmd.data = mmc_d; } else mmcio->cmd.data = NULL; mmcio->cmd.resp[0] = 0; mmcio->cmd.resp[1] = 0; mmcio->cmd.resp[2] = 0; mmcio->cmd.resp[3] = 0; } static __inline void cam_set_ccbstatus(union ccb *ccb, cam_status status) { ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= status; } static __inline cam_status cam_ccb_status(union ccb *ccb) { return ((cam_status)(ccb->ccb_h.status & CAM_STATUS_MASK)); } void cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended); static __inline void cam_fill_nvmeio(struct ccb_nvmeio *nvmeio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int32_t timeout) { nvmeio->ccb_h.func_code = XPT_NVME_IO; nvmeio->ccb_h.flags = flags; nvmeio->ccb_h.retry_count = retries; nvmeio->ccb_h.cbfcnp = cbfcnp; nvmeio->ccb_h.timeout = timeout; nvmeio->data_ptr = data_ptr; nvmeio->dxfer_len = dxfer_len; } static __inline void cam_fill_nvmeadmin(struct ccb_nvmeio *nvmeio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int32_t flags, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int32_t timeout) { nvmeio->ccb_h.func_code = XPT_NVME_ADMIN; nvmeio->ccb_h.flags = flags; nvmeio->ccb_h.retry_count = retries; nvmeio->ccb_h.cbfcnp = cbfcnp; nvmeio->ccb_h.timeout = timeout; nvmeio->data_ptr = data_ptr; nvmeio->dxfer_len = dxfer_len; } __END_DECLS #endif /* _CAM_CAM_CCB_H */ diff --git a/sys/cam/cam_periph.h b/sys/cam/cam_periph.h index 15a239decf0a..9c323394797c 100644 --- a/sys/cam/cam_periph.h +++ b/sys/cam/cam_periph.h @@ -1,274 +1,277 @@ /*- * Data structures and definitions for CAM peripheral ("type") drivers. * * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997, 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _CAM_CAM_PERIPH_H #define _CAM_CAM_PERIPH_H 1 #include #include #ifdef _KERNEL #include #include #include #include +#include + #include struct devstat; extern struct cam_periph *xpt_periph; extern struct periph_driver **periph_drivers; void periphdriver_register(void *); int periphdriver_unregister(void *); void periphdriver_init(int level); #include #define PERIPHDRIVER_DECLARE(name, driver) \ static int name ## _modevent(module_t mod, int type, void *data) \ { \ switch (type) { \ case MOD_LOAD: \ periphdriver_register(data); \ break; \ case MOD_UNLOAD: \ return (periphdriver_unregister(data)); \ default: \ return EOPNOTSUPP; \ } \ return 0; \ } \ static moduledata_t name ## _mod = { \ #name, \ name ## _modevent, \ (void *)&driver \ }; \ DECLARE_MODULE(name, name ## _mod, SI_SUB_DRIVERS, SI_ORDER_ANY); \ MODULE_DEPEND(name, cam, 1, 1, 1) /* * Callback informing the peripheral driver it can perform it's * initialization since the XPT is now fully initialized. */ typedef void (periph_init_t)(void); /* * Callback requesting the peripheral driver to remove its instances * and shutdown, if possible. */ typedef int (periph_deinit_t)(void); struct periph_driver { periph_init_t *init; char *driver_name; TAILQ_HEAD(,cam_periph) units; u_int generation; u_int flags; #define CAM_PERIPH_DRV_EARLY 0x01 periph_deinit_t *deinit; }; typedef enum { CAM_PERIPH_BIO } cam_periph_type; /* Generically useful offsets into the peripheral private area */ #define ppriv_ptr0 periph_priv.entries[0].ptr #define ppriv_ptr1 periph_priv.entries[1].ptr #define ppriv_field0 periph_priv.entries[0].field #define ppriv_field1 periph_priv.entries[1].field typedef void periph_start_t (struct cam_periph *periph, union ccb *start_ccb); typedef cam_status periph_ctor_t (struct cam_periph *periph, void *arg); typedef void periph_oninv_t (struct cam_periph *periph); typedef void periph_dtor_t (struct cam_periph *periph); struct cam_periph { periph_start_t *periph_start; periph_oninv_t *periph_oninval; periph_dtor_t *periph_dtor; char *periph_name; struct cam_path *path; /* Compiled path to device */ void *softc; struct cam_sim *sim; u_int32_t unit_number; cam_periph_type type; u_int32_t flags; #define CAM_PERIPH_RUNNING 0x01 #define CAM_PERIPH_LOCKED 0x02 #define CAM_PERIPH_LOCK_WANTED 0x04 #define CAM_PERIPH_INVALID 0x08 #define CAM_PERIPH_NEW_DEV_FOUND 0x10 #define CAM_PERIPH_RECOVERY_INPROG 0x20 #define CAM_PERIPH_RUN_TASK 0x40 #define CAM_PERIPH_FREE 0x80 #define CAM_PERIPH_ANNOUNCED 0x100 #define CAM_PERIPH_RECOVERY_WAIT 0x200 #define CAM_PERIPH_RECOVERY_WAIT_FAILED 0x400 uint32_t scheduled_priority; uint32_t immediate_priority; int periph_allocating; int periph_allocated; u_int32_t refcount; SLIST_HEAD(, ccb_hdr) ccb_list; /* For "immediate" requests */ SLIST_ENTRY(cam_periph) periph_links; TAILQ_ENTRY(cam_periph) unit_links; ac_callback_t *deferred_callback; ac_code deferred_ac; struct task periph_run_task; + uma_zone_t ccb_zone; }; #define CAM_PERIPH_MAXMAPS 2 struct cam_periph_map_info { int num_bufs_used; void *orig[CAM_PERIPH_MAXMAPS]; struct buf *bp[CAM_PERIPH_MAXMAPS]; }; cam_status cam_periph_alloc(periph_ctor_t *periph_ctor, periph_oninv_t *periph_oninvalidate, periph_dtor_t *periph_dtor, periph_start_t *periph_start, char *name, cam_periph_type type, struct cam_path *, ac_callback_t *, ac_code, void *arg); struct cam_periph *cam_periph_find(struct cam_path *path, char *name); int cam_periph_list(struct cam_path *, struct sbuf *); int cam_periph_acquire(struct cam_periph *periph); void cam_periph_doacquire(struct cam_periph *periph); void cam_periph_release(struct cam_periph *periph); void cam_periph_release_locked(struct cam_periph *periph); void cam_periph_release_locked_buses(struct cam_periph *periph); int cam_periph_hold(struct cam_periph *periph, int priority); void cam_periph_unhold(struct cam_periph *periph); void cam_periph_invalidate(struct cam_periph *periph); int cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo, u_int maxmap); void cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo); union ccb *cam_periph_getccb(struct cam_periph *periph, u_int32_t priority); int cam_periph_runccb(union ccb *ccb, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags), cam_flags camflags, u_int32_t sense_flags, struct devstat *ds); int cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr, int (*error_routine)(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags)); void cam_freeze_devq(struct cam_path *path); u_int32_t cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, u_int32_t opening_reduction, u_int32_t arg, int getcount_only); void cam_periph_async(struct cam_periph *periph, u_int32_t code, struct cam_path *path, void *arg); void cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle_ms); void cam_periph_freeze_after_event(struct cam_periph *periph, struct timeval* event_time, u_int duration_ms); int cam_periph_error(union ccb *ccb, cam_flags camflags, u_int32_t sense_flags); int cam_periph_invalidate_sysctl(SYSCTL_HANDLER_ARGS); static __inline struct mtx * cam_periph_mtx(struct cam_periph *periph) { if (periph != NULL) return (xpt_path_mtx(periph->path)); else return (NULL); } #define cam_periph_owned(periph) \ mtx_owned(xpt_path_mtx((periph)->path)) #define cam_periph_lock(periph) \ mtx_lock(xpt_path_mtx((periph)->path)) #define cam_periph_unlock(periph) \ mtx_unlock(xpt_path_mtx((periph)->path)) #define cam_periph_assert(periph, what) \ mtx_assert(xpt_path_mtx((periph)->path), (what)) #define cam_periph_sleep(periph, chan, priority, wmesg, timo) \ xpt_path_sleep((periph)->path, (chan), (priority), (wmesg), (timo)) static inline struct cam_periph * cam_periph_acquire_first(struct periph_driver *driver) { struct cam_periph *periph; xpt_lock_buses(); periph = TAILQ_FIRST(&driver->units); while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0) periph = TAILQ_NEXT(periph, unit_links); if (periph != NULL) periph->refcount++; xpt_unlock_buses(); return (periph); } static inline struct cam_periph * cam_periph_acquire_next(struct cam_periph *pperiph) { struct cam_periph *periph = pperiph; cam_periph_assert(pperiph, MA_NOTOWNED); xpt_lock_buses(); do { periph = TAILQ_NEXT(periph, unit_links); } while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0); if (periph != NULL) periph->refcount++; xpt_unlock_buses(); cam_periph_release(pperiph); return (periph); } #define CAM_PERIPH_FOREACH(periph, driver) \ for ((periph) = cam_periph_acquire_first(driver); \ (periph) != NULL; \ (periph) = cam_periph_acquire_next(periph)) #define CAM_PERIPH_PRINT(p, msg, args...) \ printf("%s%d:" msg, (periph)->periph_name, (periph)->unit_number, ##args) #endif /* _KERNEL */ #endif /* _CAM_CAM_PERIPH_H */ diff --git a/sys/cam/cam_xpt.c b/sys/cam/cam_xpt.c index b7bc2b74da6c..33361cfb68a5 100644 --- a/sys/cam/cam_xpt.c +++ b/sys/cam/cam_xpt.c @@ -1,5643 +1,5669 @@ /*- * Implementation of the Common Access Method Transport (XPT) layer. * * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "opt_printf.h" #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for xpt_print below */ #include "opt_cam.h" /* Wild guess based on not wanting to grow the stack too much */ #define XPT_PRINT_MAXLEN 512 #ifdef PRINTF_BUFR_SIZE #define XPT_PRINT_LEN PRINTF_BUFR_SIZE #else #define XPT_PRINT_LEN 128 #endif _Static_assert(XPT_PRINT_LEN <= XPT_PRINT_MAXLEN, "XPT_PRINT_LEN is too large"); /* * This is the maximum number of high powered commands (e.g. start unit) * that can be outstanding at a particular time. */ #ifndef CAM_MAX_HIGHPOWER #define CAM_MAX_HIGHPOWER 4 #endif /* Datastructures internal to the xpt layer */ MALLOC_DEFINE(M_CAMXPT, "CAM XPT", "CAM XPT buffers"); MALLOC_DEFINE(M_CAMDEV, "CAM DEV", "CAM devices"); MALLOC_DEFINE(M_CAMCCB, "CAM CCB", "CAM CCBs"); MALLOC_DEFINE(M_CAMPATH, "CAM path", "CAM paths"); struct xpt_softc { uint32_t xpt_generation; /* number of high powered commands that can go through right now */ struct mtx xpt_highpower_lock; STAILQ_HEAD(highpowerlist, cam_ed) highpowerq; int num_highpower; /* queue for handling async rescan requests. */ TAILQ_HEAD(, ccb_hdr) ccb_scanq; int buses_to_config; int buses_config_done; int announce_nosbuf; /* * Registered buses * * N.B., "busses" is an archaic spelling of "buses". In new code * "buses" is preferred. */ TAILQ_HEAD(,cam_eb) xpt_busses; u_int bus_generation; int boot_delay; struct callout boot_callout; struct task boot_task; struct root_hold_token xpt_rootmount; struct mtx xpt_topo_lock; struct taskqueue *xpt_taskq; }; typedef enum { DM_RET_COPY = 0x01, DM_RET_FLAG_MASK = 0x0f, DM_RET_NONE = 0x00, DM_RET_STOP = 0x10, DM_RET_DESCEND = 0x20, DM_RET_ERROR = 0x30, DM_RET_ACTION_MASK = 0xf0 } dev_match_ret; typedef enum { XPT_DEPTH_BUS, XPT_DEPTH_TARGET, XPT_DEPTH_DEVICE, XPT_DEPTH_PERIPH } xpt_traverse_depth; struct xpt_traverse_config { xpt_traverse_depth depth; void *tr_func; void *tr_arg; }; typedef int xpt_busfunc_t (struct cam_eb *bus, void *arg); typedef int xpt_targetfunc_t (struct cam_et *target, void *arg); typedef int xpt_devicefunc_t (struct cam_ed *device, void *arg); typedef int xpt_periphfunc_t (struct cam_periph *periph, void *arg); typedef int xpt_pdrvfunc_t (struct periph_driver **pdrv, void *arg); /* Transport layer configuration information */ static struct xpt_softc xsoftc; MTX_SYSINIT(xpt_topo_init, &xsoftc.xpt_topo_lock, "XPT topology lock", MTX_DEF); SYSCTL_INT(_kern_cam, OID_AUTO, boot_delay, CTLFLAG_RDTUN, &xsoftc.boot_delay, 0, "Bus registration wait time"); SYSCTL_UINT(_kern_cam, OID_AUTO, xpt_generation, CTLFLAG_RD, &xsoftc.xpt_generation, 0, "CAM peripheral generation count"); SYSCTL_INT(_kern_cam, OID_AUTO, announce_nosbuf, CTLFLAG_RWTUN, &xsoftc.announce_nosbuf, 0, "Don't use sbuf for announcements"); struct cam_doneq { struct mtx_padalign cam_doneq_mtx; STAILQ_HEAD(, ccb_hdr) cam_doneq; int cam_doneq_sleep; }; static struct cam_doneq cam_doneqs[MAXCPU]; static u_int __read_mostly cam_num_doneqs; static struct proc *cam_proc; static struct cam_doneq cam_async; SYSCTL_INT(_kern_cam, OID_AUTO, num_doneqs, CTLFLAG_RDTUN, &cam_num_doneqs, 0, "Number of completion queues/threads"); struct cam_periph *xpt_periph; static periph_init_t xpt_periph_init; static struct periph_driver xpt_driver = { xpt_periph_init, "xpt", TAILQ_HEAD_INITIALIZER(xpt_driver.units), /* generation */ 0, CAM_PERIPH_DRV_EARLY }; PERIPHDRIVER_DECLARE(xpt, xpt_driver); static d_open_t xptopen; static d_close_t xptclose; static d_ioctl_t xptioctl; static d_ioctl_t xptdoioctl; static struct cdevsw xpt_cdevsw = { .d_version = D_VERSION, .d_flags = 0, .d_open = xptopen, .d_close = xptclose, .d_ioctl = xptioctl, .d_name = "xpt", }; /* Storage for debugging datastructures */ struct cam_path *cam_dpath; u_int32_t __read_mostly cam_dflags = CAM_DEBUG_FLAGS; SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RWTUN, &cam_dflags, 0, "Enabled debug flags"); u_int32_t cam_debug_delay = CAM_DEBUG_DELAY; SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RWTUN, &cam_debug_delay, 0, "Delay in us after each debug message"); /* Our boot-time initialization hook */ static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *); static moduledata_t cam_moduledata = { "cam", cam_module_event_handler, NULL }; static int xpt_init(void *); DECLARE_MODULE(cam, cam_moduledata, SI_SUB_CONFIGURE, SI_ORDER_SECOND); MODULE_VERSION(cam, 1); static void xpt_async_bcast(struct async_list *async_head, u_int32_t async_code, struct cam_path *path, void *async_arg); static path_id_t xptnextfreepathid(void); static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus); static union ccb *xpt_get_ccb(struct cam_periph *periph); static union ccb *xpt_get_ccb_nowait(struct cam_periph *periph); static void xpt_run_allocq(struct cam_periph *periph, int sleep); static void xpt_run_allocq_task(void *context, int pending); static void xpt_run_devq(struct cam_devq *devq); static callout_func_t xpt_release_devq_timeout; static void xpt_acquire_bus(struct cam_eb *bus); static void xpt_release_bus(struct cam_eb *bus); static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count); static int xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue); static struct cam_et* xpt_alloc_target(struct cam_eb *bus, target_id_t target_id); static void xpt_acquire_target(struct cam_et *target); static void xpt_release_target(struct cam_et *target); static struct cam_eb* xpt_find_bus(path_id_t path_id); static struct cam_et* xpt_find_target(struct cam_eb *bus, target_id_t target_id); static struct cam_ed* xpt_find_device(struct cam_et *target, lun_id_t lun_id); static void xpt_config(void *arg); static void xpt_hold_boot_locked(void); static int xpt_schedule_dev(struct camq *queue, cam_pinfo *dev_pinfo, u_int32_t new_priority); static xpt_devicefunc_t xptpassannouncefunc; static void xptaction(struct cam_sim *sim, union ccb *work_ccb); static void xptpoll(struct cam_sim *sim); static void camisr_runqueue(void); static void xpt_done_process(struct ccb_hdr *ccb_h); static void xpt_done_td(void *); static void xpt_async_td(void *); static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_eb *bus); static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_ed *device); static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_periph *periph); static xpt_busfunc_t xptedtbusfunc; static xpt_targetfunc_t xptedttargetfunc; static xpt_devicefunc_t xptedtdevicefunc; static xpt_periphfunc_t xptedtperiphfunc; static xpt_pdrvfunc_t xptplistpdrvfunc; static xpt_periphfunc_t xptplistperiphfunc; static int xptedtmatch(struct ccb_dev_match *cdm); static int xptperiphlistmatch(struct ccb_dev_match *cdm); static int xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg); static int xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target, xpt_targetfunc_t *tr_func, void *arg); static int xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device, xpt_devicefunc_t *tr_func, void *arg); static int xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg); static int xptpdrvtraverse(struct periph_driver **start_pdrv, xpt_pdrvfunc_t *tr_func, void *arg); static int xptpdperiphtraverse(struct periph_driver **pdrv, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg); static xpt_busfunc_t xptdefbusfunc; static xpt_targetfunc_t xptdeftargetfunc; static xpt_devicefunc_t xptdefdevicefunc; static xpt_periphfunc_t xptdefperiphfunc; static void xpt_finishconfig_task(void *context, int pending); static void xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg); static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static xpt_devicefunc_t xptsetasyncfunc; static xpt_busfunc_t xptsetasyncbusfunc; static cam_status xptregister(struct cam_periph *periph, void *arg); static __inline int xpt_schedule_devq(struct cam_devq *devq, struct cam_ed *dev) { int retval; mtx_assert(&devq->send_mtx, MA_OWNED); if ((dev->ccbq.queue.entries > 0) && (dev->ccbq.dev_openings > 0) && (dev->ccbq.queue.qfrozen_cnt == 0)) { /* * The priority of a device waiting for controller * resources is that of the highest priority CCB * enqueued. */ retval = xpt_schedule_dev(&devq->send_queue, &dev->devq_entry, CAMQ_GET_PRIO(&dev->ccbq.queue)); } else { retval = 0; } return (retval); } static __inline int device_is_queued(struct cam_ed *device) { return (device->devq_entry.index != CAM_UNQUEUED_INDEX); } static void xpt_periph_init(void) { make_dev(&xpt_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "xpt0"); } static int xptopen(struct cdev *dev, int flags, int fmt, struct thread *td) { /* * Only allow read-write access. */ if (((flags & FWRITE) == 0) || ((flags & FREAD) == 0)) return(EPERM); /* * We don't allow nonblocking access. */ if ((flags & O_NONBLOCK) != 0) { printf("%s: can't do nonblocking access\n", devtoname(dev)); return(ENODEV); } return(0); } static int xptclose(struct cdev *dev, int flag, int fmt, struct thread *td) { return(0); } /* * Don't automatically grab the xpt softc lock here even though this is going * through the xpt device. The xpt device is really just a back door for * accessing other devices and SIMs, so the right thing to do is to grab * the appropriate SIM lock once the bus/SIM is located. */ static int xptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { int error; if ((error = xptdoioctl(dev, cmd, addr, flag, td)) == ENOTTY) { error = cam_compat_ioctl(dev, cmd, addr, flag, td, xptdoioctl); } return (error); } static int xptdoioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { int error; error = 0; switch(cmd) { /* * For the transport layer CAMIOCOMMAND ioctl, we really only want * to accept CCB types that don't quite make sense to send through a * passthrough driver. XPT_PATH_INQ is an exception to this, as stated * in the CAM spec. */ case CAMIOCOMMAND: { union ccb *ccb; union ccb *inccb; struct cam_eb *bus; inccb = (union ccb *)addr; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) if (inccb->ccb_h.func_code == XPT_SCSI_IO) inccb->csio.bio = NULL; #endif if (inccb->ccb_h.flags & CAM_UNLOCKED) return (EINVAL); bus = xpt_find_bus(inccb->ccb_h.path_id); if (bus == NULL) return (EINVAL); switch (inccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_RESET_BUS: if (inccb->ccb_h.target_id != CAM_TARGET_WILDCARD || inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) { xpt_release_bus(bus); return (EINVAL); } break; case XPT_SCAN_TGT: if (inccb->ccb_h.target_id == CAM_TARGET_WILDCARD || inccb->ccb_h.target_lun != CAM_LUN_WILDCARD) { xpt_release_bus(bus); return (EINVAL); } break; default: break; } switch(inccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_RESET_BUS: case XPT_PATH_INQ: case XPT_ENG_INQ: case XPT_SCAN_LUN: case XPT_SCAN_TGT: ccb = xpt_alloc_ccb(); /* * Create a path using the bus, target, and lun the * user passed in. */ if (xpt_create_path(&ccb->ccb_h.path, NULL, inccb->ccb_h.path_id, inccb->ccb_h.target_id, inccb->ccb_h.target_lun) != CAM_REQ_CMP){ error = EINVAL; xpt_free_ccb(ccb); break; } /* Ensure all of our fields are correct */ xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, inccb->ccb_h.pinfo.priority); xpt_merge_ccb(ccb, inccb); xpt_path_lock(ccb->ccb_h.path); cam_periph_runccb(ccb, NULL, 0, 0, NULL); xpt_path_unlock(ccb->ccb_h.path); bcopy(ccb, inccb, sizeof(union ccb)); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); break; case XPT_DEBUG: { union ccb ccb; /* * This is an immediate CCB, so it's okay to * allocate it on the stack. */ memset(&ccb, 0, sizeof(ccb)); /* * Create a path using the bus, target, and lun the * user passed in. */ if (xpt_create_path(&ccb.ccb_h.path, NULL, inccb->ccb_h.path_id, inccb->ccb_h.target_id, inccb->ccb_h.target_lun) != CAM_REQ_CMP){ error = EINVAL; break; } /* Ensure all of our fields are correct */ xpt_setup_ccb(&ccb.ccb_h, ccb.ccb_h.path, inccb->ccb_h.pinfo.priority); xpt_merge_ccb(&ccb, inccb); xpt_action(&ccb); bcopy(&ccb, inccb, sizeof(union ccb)); xpt_free_path(ccb.ccb_h.path); break; } case XPT_DEV_MATCH: { struct cam_periph_map_info mapinfo; struct cam_path *old_path; /* * We can't deal with physical addresses for this * type of transaction. */ if ((inccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) { error = EINVAL; break; } /* * Save this in case the caller had it set to * something in particular. */ old_path = inccb->ccb_h.path; /* * We really don't need a path for the matching * code. The path is needed because of the * debugging statements in xpt_action(). They * assume that the CCB has a valid path. */ inccb->ccb_h.path = xpt_periph->path; bzero(&mapinfo, sizeof(mapinfo)); /* * Map the pattern and match buffers into kernel * virtual address space. */ error = cam_periph_mapmem(inccb, &mapinfo, maxphys); if (error) { inccb->ccb_h.path = old_path; break; } /* * This is an immediate CCB, we can send it on directly. */ xpt_action(inccb); /* * Map the buffers back into user space. */ cam_periph_unmapmem(inccb, &mapinfo); inccb->ccb_h.path = old_path; error = 0; break; } default: error = ENOTSUP; break; } xpt_release_bus(bus); break; } /* * This is the getpassthru ioctl. It takes a XPT_GDEVLIST ccb as input, * with the periphal driver name and unit name filled in. The other * fields don't really matter as input. The passthrough driver name * ("pass"), and unit number are passed back in the ccb. The current * device generation number, and the index into the device peripheral * driver list, and the status are also passed back. Note that * since we do everything in one pass, unlike the XPT_GDEVLIST ccb, * we never return a status of CAM_GDEVLIST_LIST_CHANGED. It is * (or rather should be) impossible for the device peripheral driver * list to change since we look at the whole thing in one pass, and * we do it with lock protection. * */ case CAMGETPASSTHRU: { union ccb *ccb; struct cam_periph *periph; struct periph_driver **p_drv; char *name; u_int unit; int base_periph_found; ccb = (union ccb *)addr; unit = ccb->cgdl.unit_number; name = ccb->cgdl.periph_name; base_periph_found = 0; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) if (ccb->ccb_h.func_code == XPT_SCSI_IO) ccb->csio.bio = NULL; #endif /* * Sanity check -- make sure we don't get a null peripheral * driver name. */ if (*ccb->cgdl.periph_name == '\0') { error = EINVAL; break; } /* Keep the list from changing while we traverse it */ xpt_lock_buses(); /* first find our driver in the list of drivers */ for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) if (strcmp((*p_drv)->driver_name, name) == 0) break; if (*p_drv == NULL) { xpt_unlock_buses(); ccb->ccb_h.status = CAM_REQ_CMP_ERR; ccb->cgdl.status = CAM_GDEVLIST_ERROR; *ccb->cgdl.periph_name = '\0'; ccb->cgdl.unit_number = 0; error = ENOENT; break; } /* * Run through every peripheral instance of this driver * and check to see whether it matches the unit passed * in by the user. If it does, get out of the loops and * find the passthrough driver associated with that * peripheral driver. */ for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL; periph = TAILQ_NEXT(periph, unit_links)) { if (periph->unit_number == unit) break; } /* * If we found the peripheral driver that the user passed * in, go through all of the peripheral drivers for that * particular device and look for a passthrough driver. */ if (periph != NULL) { struct cam_ed *device; int i; base_periph_found = 1; device = periph->path->device; for (i = 0, periph = SLIST_FIRST(&device->periphs); periph != NULL; periph = SLIST_NEXT(periph, periph_links), i++) { /* * Check to see whether we have a * passthrough device or not. */ if (strcmp(periph->periph_name, "pass") == 0) { /* * Fill in the getdevlist fields. */ strlcpy(ccb->cgdl.periph_name, periph->periph_name, sizeof(ccb->cgdl.periph_name)); ccb->cgdl.unit_number = periph->unit_number; if (SLIST_NEXT(periph, periph_links)) ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; else ccb->cgdl.status = CAM_GDEVLIST_LAST_DEVICE; ccb->cgdl.generation = device->generation; ccb->cgdl.index = i; /* * Fill in some CCB header fields * that the user may want. */ ccb->ccb_h.path_id = periph->path->bus->path_id; ccb->ccb_h.target_id = periph->path->target->target_id; ccb->ccb_h.target_lun = periph->path->device->lun_id; ccb->ccb_h.status = CAM_REQ_CMP; break; } } } /* * If the periph is null here, one of two things has * happened. The first possibility is that we couldn't * find the unit number of the particular peripheral driver * that the user is asking about. e.g. the user asks for * the passthrough driver for "da11". We find the list of * "da" peripherals all right, but there is no unit 11. * The other possibility is that we went through the list * of peripheral drivers attached to the device structure, * but didn't find one with the name "pass". Either way, * we return ENOENT, since we couldn't find something. */ if (periph == NULL) { ccb->ccb_h.status = CAM_REQ_CMP_ERR; ccb->cgdl.status = CAM_GDEVLIST_ERROR; *ccb->cgdl.periph_name = '\0'; ccb->cgdl.unit_number = 0; error = ENOENT; /* * It is unfortunate that this is even necessary, * but there are many, many clueless users out there. * If this is true, the user is looking for the * passthrough driver, but doesn't have one in his * kernel. */ if (base_periph_found == 1) { printf("xptioctl: pass driver is not in the " "kernel\n"); printf("xptioctl: put \"device pass\" in " "your kernel config file\n"); } } xpt_unlock_buses(); break; } default: error = ENOTTY; break; } return(error); } static int cam_module_event_handler(module_t mod, int what, void *arg) { int error; switch (what) { case MOD_LOAD: if ((error = xpt_init(NULL)) != 0) return (error); break; case MOD_UNLOAD: return EBUSY; default: return EOPNOTSUPP; } return 0; } static struct xpt_proto * xpt_proto_find(cam_proto proto) { struct xpt_proto **pp; SET_FOREACH(pp, cam_xpt_proto_set) { if ((*pp)->proto == proto) return *pp; } return NULL; } static void xpt_rescan_done(struct cam_periph *periph, union ccb *done_ccb) { if (done_ccb->ccb_h.ppriv_ptr1 == NULL) { xpt_free_path(done_ccb->ccb_h.path); xpt_free_ccb(done_ccb); } else { done_ccb->ccb_h.cbfcnp = done_ccb->ccb_h.ppriv_ptr1; (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb); } xpt_release_boot(); } /* thread to handle bus rescans */ static void xpt_scanner_thread(void *dummy) { union ccb *ccb; struct mtx *mtx; struct cam_ed *device; xpt_lock_buses(); for (;;) { if (TAILQ_EMPTY(&xsoftc.ccb_scanq)) msleep(&xsoftc.ccb_scanq, &xsoftc.xpt_topo_lock, PRIBIO, "-", 0); if ((ccb = (union ccb *)TAILQ_FIRST(&xsoftc.ccb_scanq)) != NULL) { TAILQ_REMOVE(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe); xpt_unlock_buses(); /* * We need to lock the device's mutex which we use as * the path mutex. We can't do it directly because the * cam_path in the ccb may wind up going away because * the path lock may be dropped and the path retired in * the completion callback. We do this directly to keep * the reference counts in cam_path sane. We also have * to copy the device pointer because ccb_h.path may * be freed in the callback. */ mtx = xpt_path_mtx(ccb->ccb_h.path); device = ccb->ccb_h.path->device; xpt_acquire_device(device); mtx_lock(mtx); xpt_action(ccb); mtx_unlock(mtx); xpt_release_device(device); xpt_lock_buses(); } } } void xpt_rescan(union ccb *ccb) { struct ccb_hdr *hdr; /* Prepare request */ if (ccb->ccb_h.path->target->target_id == CAM_TARGET_WILDCARD && ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_BUS; else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD && ccb->ccb_h.path->device->lun_id == CAM_LUN_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_TGT; else if (ccb->ccb_h.path->target->target_id != CAM_TARGET_WILDCARD && ccb->ccb_h.path->device->lun_id != CAM_LUN_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_LUN; else { xpt_print(ccb->ccb_h.path, "illegal scan path\n"); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); return; } CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_rescan: func %#x %s\n", ccb->ccb_h.func_code, xpt_action_name(ccb->ccb_h.func_code))); ccb->ccb_h.ppriv_ptr1 = ccb->ccb_h.cbfcnp; ccb->ccb_h.cbfcnp = xpt_rescan_done; xpt_setup_ccb(&ccb->ccb_h, ccb->ccb_h.path, CAM_PRIORITY_XPT); /* Don't make duplicate entries for the same paths. */ xpt_lock_buses(); if (ccb->ccb_h.ppriv_ptr1 == NULL) { TAILQ_FOREACH(hdr, &xsoftc.ccb_scanq, sim_links.tqe) { if (xpt_path_comp(hdr->path, ccb->ccb_h.path) == 0) { wakeup(&xsoftc.ccb_scanq); xpt_unlock_buses(); xpt_print(ccb->ccb_h.path, "rescan already queued\n"); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); return; } } } TAILQ_INSERT_TAIL(&xsoftc.ccb_scanq, &ccb->ccb_h, sim_links.tqe); xpt_hold_boot_locked(); wakeup(&xsoftc.ccb_scanq); xpt_unlock_buses(); } /* Functions accessed by the peripheral drivers */ static int xpt_init(void *dummy) { struct cam_sim *xpt_sim; struct cam_path *path; struct cam_devq *devq; cam_status status; int error, i; TAILQ_INIT(&xsoftc.xpt_busses); TAILQ_INIT(&xsoftc.ccb_scanq); STAILQ_INIT(&xsoftc.highpowerq); xsoftc.num_highpower = CAM_MAX_HIGHPOWER; mtx_init(&xsoftc.xpt_highpower_lock, "XPT highpower lock", NULL, MTX_DEF); xsoftc.xpt_taskq = taskqueue_create("CAM XPT task", M_WAITOK, taskqueue_thread_enqueue, /*context*/&xsoftc.xpt_taskq); #ifdef CAM_BOOT_DELAY /* * Override this value at compile time to assist our users * who don't use loader to boot a kernel. */ xsoftc.boot_delay = CAM_BOOT_DELAY; #endif /* * The xpt layer is, itself, the equivalent of a SIM. * Allow 16 ccbs in the ccb pool for it. This should * give decent parallelism when we probe buses and * perform other XPT functions. */ devq = cam_simq_alloc(16); xpt_sim = cam_sim_alloc(xptaction, xptpoll, "xpt", /*softc*/NULL, /*unit*/0, /*mtx*/NULL, /*max_dev_transactions*/0, /*max_tagged_dev_transactions*/0, devq); if (xpt_sim == NULL) return (ENOMEM); if ((status = xpt_bus_register(xpt_sim, NULL, 0)) != CAM_SUCCESS) { printf("xpt_init: xpt_bus_register failed with status %#x," " failing attach\n", status); return (EINVAL); } /* * Looking at the XPT from the SIM layer, the XPT is * the equivalent of a peripheral driver. Allocate * a peripheral driver entry for us. */ if ((status = xpt_create_path(&path, NULL, CAM_XPT_PATH_ID, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD)) != CAM_REQ_CMP) { printf("xpt_init: xpt_create_path failed with status %#x," " failing attach\n", status); return (EINVAL); } xpt_path_lock(path); cam_periph_alloc(xptregister, NULL, NULL, NULL, "xpt", CAM_PERIPH_BIO, path, NULL, 0, xpt_sim); xpt_path_unlock(path); xpt_free_path(path); if (cam_num_doneqs < 1) cam_num_doneqs = 1 + mp_ncpus / 6; else if (cam_num_doneqs > MAXCPU) cam_num_doneqs = MAXCPU; for (i = 0; i < cam_num_doneqs; i++) { mtx_init(&cam_doneqs[i].cam_doneq_mtx, "CAM doneq", NULL, MTX_DEF); STAILQ_INIT(&cam_doneqs[i].cam_doneq); error = kproc_kthread_add(xpt_done_td, &cam_doneqs[i], &cam_proc, NULL, 0, 0, "cam", "doneq%d", i); if (error != 0) { cam_num_doneqs = i; break; } } if (cam_num_doneqs < 1) { printf("xpt_init: Cannot init completion queues " "- failing attach\n"); return (ENOMEM); } mtx_init(&cam_async.cam_doneq_mtx, "CAM async", NULL, MTX_DEF); STAILQ_INIT(&cam_async.cam_doneq); if (kproc_kthread_add(xpt_async_td, &cam_async, &cam_proc, NULL, 0, 0, "cam", "async") != 0) { printf("xpt_init: Cannot init async thread " "- failing attach\n"); return (ENOMEM); } /* * Register a callback for when interrupts are enabled. */ config_intrhook_oneshot(xpt_config, NULL); return (0); } static cam_status xptregister(struct cam_periph *periph, void *arg) { struct cam_sim *xpt_sim; if (periph == NULL) { printf("xptregister: periph was NULL!!\n"); return(CAM_REQ_CMP_ERR); } xpt_sim = (struct cam_sim *)arg; xpt_sim->softc = periph; xpt_periph = periph; periph->softc = NULL; return(CAM_REQ_CMP); } int32_t xpt_add_periph(struct cam_periph *periph) { struct cam_ed *device; int32_t status; TASK_INIT(&periph->periph_run_task, 0, xpt_run_allocq_task, periph); device = periph->path->device; status = CAM_REQ_CMP; if (device != NULL) { mtx_lock(&device->target->bus->eb_mtx); device->generation++; SLIST_INSERT_HEAD(&device->periphs, periph, periph_links); mtx_unlock(&device->target->bus->eb_mtx); atomic_add_32(&xsoftc.xpt_generation, 1); } return (status); } void xpt_remove_periph(struct cam_periph *periph) { struct cam_ed *device; device = periph->path->device; if (device != NULL) { mtx_lock(&device->target->bus->eb_mtx); device->generation++; SLIST_REMOVE(&device->periphs, periph, cam_periph, periph_links); mtx_unlock(&device->target->bus->eb_mtx); atomic_add_32(&xsoftc.xpt_generation, 1); } } void xpt_announce_periph(struct cam_periph *periph, char *announce_string) { struct cam_path *path = periph->path; struct xpt_proto *proto; cam_periph_assert(periph, MA_OWNED); periph->flags |= CAM_PERIPH_ANNOUNCED; printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->bus->path_id, path->target->target_id, (uintmax_t)path->device->lun_id); printf("%s%d: ", periph->periph_name, periph->unit_number); proto = xpt_proto_find(path->device->protocol); if (proto) proto->ops->announce(path->device); else printf("%s%d: Unknown protocol device %d\n", periph->periph_name, periph->unit_number, path->device->protocol); if (path->device->serial_num_len > 0) { /* Don't wrap the screen - print only the first 60 chars */ printf("%s%d: Serial Number %.60s\n", periph->periph_name, periph->unit_number, path->device->serial_num); } /* Announce transport details. */ path->bus->xport->ops->announce(periph); /* Announce command queueing. */ if (path->device->inq_flags & SID_CmdQue || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) { printf("%s%d: Command Queueing enabled\n", periph->periph_name, periph->unit_number); } /* Announce caller's details if they've passed in. */ if (announce_string != NULL) printf("%s%d: %s\n", periph->periph_name, periph->unit_number, announce_string); } void xpt_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb, char *announce_string) { struct cam_path *path = periph->path; struct xpt_proto *proto; cam_periph_assert(periph, MA_OWNED); periph->flags |= CAM_PERIPH_ANNOUNCED; /* Fall back to the non-sbuf method if necessary */ if (xsoftc.announce_nosbuf != 0) { xpt_announce_periph(periph, announce_string); return; } proto = xpt_proto_find(path->device->protocol); if (((proto != NULL) && (proto->ops->announce_sbuf == NULL)) || (path->bus->xport->ops->announce_sbuf == NULL)) { xpt_announce_periph(periph, announce_string); return; } sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->bus->path_id, path->target->target_id, (uintmax_t)path->device->lun_id); sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number); if (proto) proto->ops->announce_sbuf(path->device, sb); else sbuf_printf(sb, "%s%d: Unknown protocol device %d\n", periph->periph_name, periph->unit_number, path->device->protocol); if (path->device->serial_num_len > 0) { /* Don't wrap the screen - print only the first 60 chars */ sbuf_printf(sb, "%s%d: Serial Number %.60s\n", periph->periph_name, periph->unit_number, path->device->serial_num); } /* Announce transport details. */ path->bus->xport->ops->announce_sbuf(periph, sb); /* Announce command queueing. */ if (path->device->inq_flags & SID_CmdQue || path->device->flags & CAM_DEV_TAG_AFTER_COUNT) { sbuf_printf(sb, "%s%d: Command Queueing enabled\n", periph->periph_name, periph->unit_number); } /* Announce caller's details if they've passed in. */ if (announce_string != NULL) sbuf_printf(sb, "%s%d: %s\n", periph->periph_name, periph->unit_number, announce_string); } void xpt_announce_quirks(struct cam_periph *periph, int quirks, char *bit_string) { if (quirks != 0) { printf("%s%d: quirks=0x%b\n", periph->periph_name, periph->unit_number, quirks, bit_string); } } void xpt_announce_quirks_sbuf(struct cam_periph *periph, struct sbuf *sb, int quirks, char *bit_string) { if (xsoftc.announce_nosbuf != 0) { xpt_announce_quirks(periph, quirks, bit_string); return; } if (quirks != 0) { sbuf_printf(sb, "%s%d: quirks=0x%b\n", periph->periph_name, periph->unit_number, quirks, bit_string); } } void xpt_denounce_periph(struct cam_periph *periph) { struct cam_path *path = periph->path; struct xpt_proto *proto; cam_periph_assert(periph, MA_OWNED); printf("%s%d at %s%d bus %d scbus%d target %d lun %jx\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->bus->path_id, path->target->target_id, (uintmax_t)path->device->lun_id); printf("%s%d: ", periph->periph_name, periph->unit_number); proto = xpt_proto_find(path->device->protocol); if (proto) proto->ops->denounce(path->device); else printf("%s%d: Unknown protocol device %d\n", periph->periph_name, periph->unit_number, path->device->protocol); if (path->device->serial_num_len > 0) printf(" s/n %.60s", path->device->serial_num); printf(" detached\n"); } void xpt_denounce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb) { struct cam_path *path = periph->path; struct xpt_proto *proto; cam_periph_assert(periph, MA_OWNED); /* Fall back to the non-sbuf method if necessary */ if (xsoftc.announce_nosbuf != 0) { xpt_denounce_periph(periph); return; } proto = xpt_proto_find(path->device->protocol); if ((proto != NULL) && (proto->ops->denounce_sbuf == NULL)) { xpt_denounce_periph(periph); return; } sbuf_printf(sb, "%s%d at %s%d bus %d scbus%d target %d lun %jx\n", periph->periph_name, periph->unit_number, path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id, path->bus->path_id, path->target->target_id, (uintmax_t)path->device->lun_id); sbuf_printf(sb, "%s%d: ", periph->periph_name, periph->unit_number); if (proto) proto->ops->denounce_sbuf(path->device, sb); else sbuf_printf(sb, "%s%d: Unknown protocol device %d\n", periph->periph_name, periph->unit_number, path->device->protocol); if (path->device->serial_num_len > 0) sbuf_printf(sb, " s/n %.60s", path->device->serial_num); sbuf_printf(sb, " detached\n"); } int xpt_getattr(char *buf, size_t len, const char *attr, struct cam_path *path) { int ret = -1, l, o; struct ccb_dev_advinfo cdai; struct scsi_vpd_device_id *did; struct scsi_vpd_id_descriptor *idd; xpt_path_assert(path, MA_OWNED); memset(&cdai, 0, sizeof(cdai)); xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL); cdai.ccb_h.func_code = XPT_DEV_ADVINFO; cdai.flags = CDAI_FLAG_NONE; cdai.bufsiz = len; cdai.buf = buf; if (!strcmp(attr, "GEOM::ident")) cdai.buftype = CDAI_TYPE_SERIAL_NUM; else if (!strcmp(attr, "GEOM::physpath")) cdai.buftype = CDAI_TYPE_PHYS_PATH; else if (strcmp(attr, "GEOM::lunid") == 0 || strcmp(attr, "GEOM::lunname") == 0) { cdai.buftype = CDAI_TYPE_SCSI_DEVID; cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN; cdai.buf = malloc(cdai.bufsiz, M_CAMXPT, M_NOWAIT); if (cdai.buf == NULL) { ret = ENOMEM; goto out; } } else goto out; xpt_action((union ccb *)&cdai); /* can only be synchronous */ if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); if (cdai.provsiz == 0) goto out; switch(cdai.buftype) { case CDAI_TYPE_SCSI_DEVID: did = (struct scsi_vpd_device_id *)cdai.buf; if (strcmp(attr, "GEOM::lunid") == 0) { idd = scsi_get_devid(did, cdai.provsiz, scsi_devid_is_lun_naa); if (idd == NULL) idd = scsi_get_devid(did, cdai.provsiz, scsi_devid_is_lun_eui64); if (idd == NULL) idd = scsi_get_devid(did, cdai.provsiz, scsi_devid_is_lun_uuid); if (idd == NULL) idd = scsi_get_devid(did, cdai.provsiz, scsi_devid_is_lun_md5); } else idd = NULL; if (idd == NULL) idd = scsi_get_devid(did, cdai.provsiz, scsi_devid_is_lun_t10); if (idd == NULL) idd = scsi_get_devid(did, cdai.provsiz, scsi_devid_is_lun_name); if (idd == NULL) break; ret = 0; if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_ASCII) { if (idd->length < len) { for (l = 0; l < idd->length; l++) buf[l] = idd->identifier[l] ? idd->identifier[l] : ' '; buf[l] = 0; } else ret = EFAULT; break; } if ((idd->proto_codeset & SVPD_ID_CODESET_MASK) == SVPD_ID_CODESET_UTF8) { l = strnlen(idd->identifier, idd->length); if (l < len) { bcopy(idd->identifier, buf, l); buf[l] = 0; } else ret = EFAULT; break; } if ((idd->id_type & SVPD_ID_TYPE_MASK) == SVPD_ID_TYPE_UUID && idd->identifier[0] == 0x10) { if ((idd->length - 2) * 2 + 4 >= len) { ret = EFAULT; break; } for (l = 2, o = 0; l < idd->length; l++) { if (l == 6 || l == 8 || l == 10 || l == 12) o += sprintf(buf + o, "-"); o += sprintf(buf + o, "%02x", idd->identifier[l]); } break; } if (idd->length * 2 < len) { for (l = 0; l < idd->length; l++) sprintf(buf + l * 2, "%02x", idd->identifier[l]); } else ret = EFAULT; break; default: if (cdai.provsiz < len) { cdai.buf[cdai.provsiz] = 0; ret = 0; } else ret = EFAULT; break; } out: if ((char *)cdai.buf != buf) free(cdai.buf, M_CAMXPT); return ret; } static dev_match_ret xptbusmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_eb *bus) { dev_match_ret retval; u_int i; retval = DM_RET_NONE; /* * If we aren't given something to match against, that's an error. */ if (bus == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this bus matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_DESCEND | DM_RET_COPY); for (i = 0; i < num_patterns; i++) { struct bus_match_pattern *cur_pattern; /* * If the pattern in question isn't for a bus node, we * aren't interested. However, we do indicate to the * calling routine that we should continue descending the * tree, since the user wants to match against lower-level * EDT elements. */ if (patterns[i].type != DEV_MATCH_BUS) { if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_DESCEND; continue; } cur_pattern = &patterns[i].pattern.bus_pattern; /* * If they want to match any bus node, we give them any * device node. */ if (cur_pattern->flags == BUS_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * If we've already decided on an action, go ahead * and return. */ if ((retval & DM_RET_ACTION_MASK) != DM_RET_NONE) return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == BUS_MATCH_NONE) continue; if (((cur_pattern->flags & BUS_MATCH_PATH) != 0) && (cur_pattern->path_id != bus->path_id)) continue; if (((cur_pattern->flags & BUS_MATCH_BUS_ID) != 0) && (cur_pattern->bus_id != bus->sim->bus_id)) continue; if (((cur_pattern->flags & BUS_MATCH_UNIT) != 0) && (cur_pattern->unit_number != bus->sim->unit_number)) continue; if (((cur_pattern->flags & BUS_MATCH_NAME) != 0) && (strncmp(cur_pattern->dev_name, bus->sim->sim_name, DEV_IDLEN) != 0)) continue; /* * If we get to this point, the user definitely wants * information on this bus. So tell the caller to copy the * data out. */ retval |= DM_RET_COPY; /* * If the return action has been set to descend, then we * know that we've already seen a non-bus matching * expression, therefore we need to further descend the tree. * This won't change by continuing around the loop, so we * go ahead and return. If we haven't seen a non-bus * matching expression, we keep going around the loop until * we exhaust the matching expressions. We'll set the stop * flag once we fall out of the loop. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND) return(retval); } /* * If the return action hasn't been set to descend yet, that means * we haven't seen anything other than bus matching patterns. So * tell the caller to stop descending the tree -- the user doesn't * want to match against lower level tree elements. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_STOP; return(retval); } static dev_match_ret xptdevicematch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_ed *device) { dev_match_ret retval; u_int i; retval = DM_RET_NONE; /* * If we aren't given something to match against, that's an error. */ if (device == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this device matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_DESCEND | DM_RET_COPY); for (i = 0; i < num_patterns; i++) { struct device_match_pattern *cur_pattern; struct scsi_vpd_device_id *device_id_page; /* * If the pattern in question isn't for a device node, we * aren't interested. */ if (patterns[i].type != DEV_MATCH_DEVICE) { if ((patterns[i].type == DEV_MATCH_PERIPH) && ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE)) retval |= DM_RET_DESCEND; continue; } cur_pattern = &patterns[i].pattern.device_pattern; /* Error out if mutually exclusive options are specified. */ if ((cur_pattern->flags & (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID)) == (DEV_MATCH_INQUIRY|DEV_MATCH_DEVID)) return(DM_RET_ERROR); /* * If they want to match any device node, we give them any * device node. */ if (cur_pattern->flags == DEV_MATCH_ANY) goto copy_dev_node; /* * Not sure why someone would do this... */ if (cur_pattern->flags == DEV_MATCH_NONE) continue; if (((cur_pattern->flags & DEV_MATCH_PATH) != 0) && (cur_pattern->path_id != device->target->bus->path_id)) continue; if (((cur_pattern->flags & DEV_MATCH_TARGET) != 0) && (cur_pattern->target_id != device->target->target_id)) continue; if (((cur_pattern->flags & DEV_MATCH_LUN) != 0) && (cur_pattern->target_lun != device->lun_id)) continue; if (((cur_pattern->flags & DEV_MATCH_INQUIRY) != 0) && (cam_quirkmatch((caddr_t)&device->inq_data, (caddr_t)&cur_pattern->data.inq_pat, 1, sizeof(cur_pattern->data.inq_pat), scsi_static_inquiry_match) == NULL)) continue; device_id_page = (struct scsi_vpd_device_id *)device->device_id; if (((cur_pattern->flags & DEV_MATCH_DEVID) != 0) && (device->device_id_len < SVPD_DEVICE_ID_HDR_LEN || scsi_devid_match((uint8_t *)device_id_page->desc_list, device->device_id_len - SVPD_DEVICE_ID_HDR_LEN, cur_pattern->data.devid_pat.id, cur_pattern->data.devid_pat.id_len) != 0)) continue; copy_dev_node: /* * If we get to this point, the user definitely wants * information on this device. So tell the caller to copy * the data out. */ retval |= DM_RET_COPY; /* * If the return action has been set to descend, then we * know that we've already seen a peripheral matching * expression, therefore we need to further descend the tree. * This won't change by continuing around the loop, so we * go ahead and return. If we haven't seen a peripheral * matching expression, we keep going around the loop until * we exhaust the matching expressions. We'll set the stop * flag once we fall out of the loop. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_DESCEND) return(retval); } /* * If the return action hasn't been set to descend yet, that means * we haven't seen any peripheral matching patterns. So tell the * caller to stop descending the tree -- the user doesn't want to * match against lower level tree elements. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_NONE) retval |= DM_RET_STOP; return(retval); } /* * Match a single peripheral against any number of match patterns. */ static dev_match_ret xptperiphmatch(struct dev_match_pattern *patterns, u_int num_patterns, struct cam_periph *periph) { dev_match_ret retval; u_int i; /* * If we aren't given something to match against, that's an error. */ if (periph == NULL) return(DM_RET_ERROR); /* * If there are no match entries, then this peripheral matches no * matter what. */ if ((patterns == NULL) || (num_patterns == 0)) return(DM_RET_STOP | DM_RET_COPY); /* * There aren't any nodes below a peripheral node, so there's no * reason to descend the tree any further. */ retval = DM_RET_STOP; for (i = 0; i < num_patterns; i++) { struct periph_match_pattern *cur_pattern; /* * If the pattern in question isn't for a peripheral, we * aren't interested. */ if (patterns[i].type != DEV_MATCH_PERIPH) continue; cur_pattern = &patterns[i].pattern.periph_pattern; /* * If they want to match on anything, then we will do so. */ if (cur_pattern->flags == PERIPH_MATCH_ANY) { /* set the copy flag */ retval |= DM_RET_COPY; /* * We've already set the return action to stop, * since there are no nodes below peripherals in * the tree. */ return(retval); } /* * Not sure why someone would do this... */ if (cur_pattern->flags == PERIPH_MATCH_NONE) continue; if (((cur_pattern->flags & PERIPH_MATCH_PATH) != 0) && (cur_pattern->path_id != periph->path->bus->path_id)) continue; /* * For the target and lun id's, we have to make sure the * target and lun pointers aren't NULL. The xpt peripheral * has a wildcard target and device. */ if (((cur_pattern->flags & PERIPH_MATCH_TARGET) != 0) && ((periph->path->target == NULL) ||(cur_pattern->target_id != periph->path->target->target_id))) continue; if (((cur_pattern->flags & PERIPH_MATCH_LUN) != 0) && ((periph->path->device == NULL) || (cur_pattern->target_lun != periph->path->device->lun_id))) continue; if (((cur_pattern->flags & PERIPH_MATCH_UNIT) != 0) && (cur_pattern->unit_number != periph->unit_number)) continue; if (((cur_pattern->flags & PERIPH_MATCH_NAME) != 0) && (strncmp(cur_pattern->periph_name, periph->periph_name, DEV_IDLEN) != 0)) continue; /* * If we get to this point, the user definitely wants * information on this peripheral. So tell the caller to * copy the data out. */ retval |= DM_RET_COPY; /* * The return action has already been set to stop, since * peripherals don't have any nodes below them in the EDT. */ return(retval); } /* * If we get to this point, the peripheral that was passed in * doesn't match any of the patterns. */ return(retval); } static int xptedtbusfunc(struct cam_eb *bus, void *arg) { struct ccb_dev_match *cdm; struct cam_et *target; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; /* * If our position is for something deeper in the tree, that means * that we've already seen this node. So, we keep going down. */ if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target != NULL)) retval = DM_RET_DESCEND; else retval = xptbusmatch(cdm->patterns, cdm->num_patterns, bus); /* * If we got an error, bail out of the search. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this bus out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS; cdm->pos.cookie.bus = bus; cdm->pos.generations[CAM_BUS_GENERATION]= xsoftc.bus_generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_BUS; cdm->matches[j].result.bus_result.path_id = bus->path_id; cdm->matches[j].result.bus_result.bus_id = bus->sim->bus_id; cdm->matches[j].result.bus_result.unit_number = bus->sim->unit_number; strlcpy(cdm->matches[j].result.bus_result.dev_name, bus->sim->sim_name, sizeof(cdm->matches[j].result.bus_result.dev_name)); } /* * If the user is only interested in buses, there's no * reason to descend to the next level in the tree. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP) return(1); /* * If there is a target generation recorded, check it to * make sure the target list hasn't changed. */ mtx_lock(&bus->eb_mtx); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target != NULL)) { if ((cdm->pos.generations[CAM_TARGET_GENERATION] != bus->generation)) { mtx_unlock(&bus->eb_mtx); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return (0); } target = (struct cam_et *)cdm->pos.cookie.target; target->refcount++; } else target = NULL; mtx_unlock(&bus->eb_mtx); return (xpttargettraverse(bus, target, xptedttargetfunc, arg)); } static int xptedttargetfunc(struct cam_et *target, void *arg) { struct ccb_dev_match *cdm; struct cam_eb *bus; struct cam_ed *device; cdm = (struct ccb_dev_match *)arg; bus = target->bus; /* * If there is a device list generation recorded, check it to * make sure the device list hasn't changed. */ mtx_lock(&bus->eb_mtx); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device != NULL)) { if (cdm->pos.generations[CAM_DEV_GENERATION] != target->generation) { mtx_unlock(&bus->eb_mtx); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } device = (struct cam_ed *)cdm->pos.cookie.device; device->refcount++; } else device = NULL; mtx_unlock(&bus->eb_mtx); return (xptdevicetraverse(target, device, xptedtdevicefunc, arg)); } static int xptedtdevicefunc(struct cam_ed *device, void *arg) { struct cam_eb *bus; struct cam_periph *periph; struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; bus = device->target->bus; /* * If our position is for something deeper in the tree, that means * that we've already seen this node. So, we keep going down. */ if ((cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device == device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) retval = DM_RET_DESCEND; else retval = xptdevicematch(cdm->patterns, cdm->num_patterns, device); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this device out. */ if (retval & DM_RET_COPY) { int spaceleft, j; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS | CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE; cdm->pos.cookie.bus = device->target->bus; cdm->pos.generations[CAM_BUS_GENERATION]= xsoftc.bus_generation; cdm->pos.cookie.target = device->target; cdm->pos.generations[CAM_TARGET_GENERATION] = device->target->bus->generation; cdm->pos.cookie.device = device; cdm->pos.generations[CAM_DEV_GENERATION] = device->target->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_DEVICE; cdm->matches[j].result.device_result.path_id = device->target->bus->path_id; cdm->matches[j].result.device_result.target_id = device->target->target_id; cdm->matches[j].result.device_result.target_lun = device->lun_id; cdm->matches[j].result.device_result.protocol = device->protocol; bcopy(&device->inq_data, &cdm->matches[j].result.device_result.inq_data, sizeof(struct scsi_inquiry_data)); bcopy(&device->ident_data, &cdm->matches[j].result.device_result.ident_data, sizeof(struct ata_params)); /* Let the user know whether this device is unconfigured */ if (device->flags & CAM_DEV_UNCONFIGURED) cdm->matches[j].result.device_result.flags = DEV_RESULT_UNCONFIGURED; else cdm->matches[j].result.device_result.flags = DEV_RESULT_NOFLAG; } /* * If the user isn't interested in peripherals, don't descend * the tree any further. */ if ((retval & DM_RET_ACTION_MASK) == DM_RET_STOP) return(1); /* * If there is a peripheral list generation recorded, make sure * it hasn't changed. */ xpt_lock_buses(); mtx_lock(&bus->eb_mtx); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus == bus) && (cdm->pos.position_type & CAM_DEV_POS_TARGET) && (cdm->pos.cookie.target == device->target) && (cdm->pos.position_type & CAM_DEV_POS_DEVICE) && (cdm->pos.cookie.device == device) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) { if (cdm->pos.generations[CAM_PERIPH_GENERATION] != device->generation) { mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } periph = (struct cam_periph *)cdm->pos.cookie.periph; periph->refcount++; } else periph = NULL; mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); return (xptperiphtraverse(device, periph, xptedtperiphfunc, arg)); } static int xptedtperiphfunc(struct cam_periph *periph, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this peripheral out. */ if (retval & DM_RET_COPY) { int spaceleft, j; size_t l; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_EDT | CAM_DEV_POS_BUS | CAM_DEV_POS_TARGET | CAM_DEV_POS_DEVICE | CAM_DEV_POS_PERIPH; cdm->pos.cookie.bus = periph->path->bus; cdm->pos.generations[CAM_BUS_GENERATION]= xsoftc.bus_generation; cdm->pos.cookie.target = periph->path->target; cdm->pos.generations[CAM_TARGET_GENERATION] = periph->path->bus->generation; cdm->pos.cookie.device = periph->path->device; cdm->pos.generations[CAM_DEV_GENERATION] = periph->path->target->generation; cdm->pos.cookie.periph = periph; cdm->pos.generations[CAM_PERIPH_GENERATION] = periph->path->device->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_PERIPH; cdm->matches[j].result.periph_result.path_id = periph->path->bus->path_id; cdm->matches[j].result.periph_result.target_id = periph->path->target->target_id; cdm->matches[j].result.periph_result.target_lun = periph->path->device->lun_id; cdm->matches[j].result.periph_result.unit_number = periph->unit_number; l = sizeof(cdm->matches[j].result.periph_result.periph_name); strlcpy(cdm->matches[j].result.periph_result.periph_name, periph->periph_name, l); } return(1); } static int xptedtmatch(struct ccb_dev_match *cdm) { struct cam_eb *bus; int ret; cdm->num_matches = 0; /* * Check the bus list generation. If it has changed, the user * needs to reset everything and start over. */ xpt_lock_buses(); if ((cdm->pos.position_type & CAM_DEV_POS_BUS) && (cdm->pos.cookie.bus != NULL)) { if (cdm->pos.generations[CAM_BUS_GENERATION] != xsoftc.bus_generation) { xpt_unlock_buses(); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } bus = (struct cam_eb *)cdm->pos.cookie.bus; bus->refcount++; } else bus = NULL; xpt_unlock_buses(); ret = xptbustraverse(bus, xptedtbusfunc, cdm); /* * If we get back 0, that means that we had to stop before fully * traversing the EDT. It also means that one of the subroutines * has set the status field to the proper value. If we get back 1, * we've fully traversed the EDT and copied out any matching entries. */ if (ret == 1) cdm->status = CAM_DEV_MATCH_LAST; return(ret); } static int xptplistpdrvfunc(struct periph_driver **pdrv, void *arg) { struct cam_periph *periph; struct ccb_dev_match *cdm; cdm = (struct ccb_dev_match *)arg; xpt_lock_buses(); if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv == pdrv) && (cdm->pos.position_type & CAM_DEV_POS_PERIPH) && (cdm->pos.cookie.periph != NULL)) { if (cdm->pos.generations[CAM_PERIPH_GENERATION] != (*pdrv)->generation) { xpt_unlock_buses(); cdm->status = CAM_DEV_MATCH_LIST_CHANGED; return(0); } periph = (struct cam_periph *)cdm->pos.cookie.periph; periph->refcount++; } else periph = NULL; xpt_unlock_buses(); return (xptpdperiphtraverse(pdrv, periph, xptplistperiphfunc, arg)); } static int xptplistperiphfunc(struct cam_periph *periph, void *arg) { struct ccb_dev_match *cdm; dev_match_ret retval; cdm = (struct ccb_dev_match *)arg; retval = xptperiphmatch(cdm->patterns, cdm->num_patterns, periph); if ((retval & DM_RET_ACTION_MASK) == DM_RET_ERROR) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } /* * If the copy flag is set, copy this peripheral out. */ if (retval & DM_RET_COPY) { int spaceleft, j; size_t l; spaceleft = cdm->match_buf_len - (cdm->num_matches * sizeof(struct dev_match_result)); /* * If we don't have enough space to put in another * match result, save our position and tell the * user there are more devices to check. */ if (spaceleft < sizeof(struct dev_match_result)) { struct periph_driver **pdrv; pdrv = NULL; bzero(&cdm->pos, sizeof(cdm->pos)); cdm->pos.position_type = CAM_DEV_POS_PDRV | CAM_DEV_POS_PDPTR | CAM_DEV_POS_PERIPH; /* * This may look a bit non-sensical, but it is * actually quite logical. There are very few * peripheral drivers, and bloating every peripheral * structure with a pointer back to its parent * peripheral driver linker set entry would cost * more in the long run than doing this quick lookup. */ for (pdrv = periph_drivers; *pdrv != NULL; pdrv++) { if (strcmp((*pdrv)->driver_name, periph->periph_name) == 0) break; } if (*pdrv == NULL) { cdm->status = CAM_DEV_MATCH_ERROR; return(0); } cdm->pos.cookie.pdrv = pdrv; /* * The periph generation slot does double duty, as * does the periph pointer slot. They are used for * both edt and pdrv lookups and positioning. */ cdm->pos.cookie.periph = periph; cdm->pos.generations[CAM_PERIPH_GENERATION] = (*pdrv)->generation; cdm->status = CAM_DEV_MATCH_MORE; return(0); } j = cdm->num_matches; cdm->num_matches++; cdm->matches[j].type = DEV_MATCH_PERIPH; cdm->matches[j].result.periph_result.path_id = periph->path->bus->path_id; /* * The transport layer peripheral doesn't have a target or * lun. */ if (periph->path->target) cdm->matches[j].result.periph_result.target_id = periph->path->target->target_id; else cdm->matches[j].result.periph_result.target_id = CAM_TARGET_WILDCARD; if (periph->path->device) cdm->matches[j].result.periph_result.target_lun = periph->path->device->lun_id; else cdm->matches[j].result.periph_result.target_lun = CAM_LUN_WILDCARD; cdm->matches[j].result.periph_result.unit_number = periph->unit_number; l = sizeof(cdm->matches[j].result.periph_result.periph_name); strlcpy(cdm->matches[j].result.periph_result.periph_name, periph->periph_name, l); } return(1); } static int xptperiphlistmatch(struct ccb_dev_match *cdm) { int ret; cdm->num_matches = 0; /* * At this point in the edt traversal function, we check the bus * list generation to make sure that no buses have been added or * removed since the user last sent a XPT_DEV_MATCH ccb through. * For the peripheral driver list traversal function, however, we * don't have to worry about new peripheral driver types coming or * going; they're in a linker set, and therefore can't change * without a recompile. */ if ((cdm->pos.position_type & CAM_DEV_POS_PDPTR) && (cdm->pos.cookie.pdrv != NULL)) ret = xptpdrvtraverse( (struct periph_driver **)cdm->pos.cookie.pdrv, xptplistpdrvfunc, cdm); else ret = xptpdrvtraverse(NULL, xptplistpdrvfunc, cdm); /* * If we get back 0, that means that we had to stop before fully * traversing the peripheral driver tree. It also means that one of * the subroutines has set the status field to the proper value. If * we get back 1, we've fully traversed the EDT and copied out any * matching entries. */ if (ret == 1) cdm->status = CAM_DEV_MATCH_LAST; return(ret); } static int xptbustraverse(struct cam_eb *start_bus, xpt_busfunc_t *tr_func, void *arg) { struct cam_eb *bus, *next_bus; int retval; retval = 1; if (start_bus) bus = start_bus; else { xpt_lock_buses(); bus = TAILQ_FIRST(&xsoftc.xpt_busses); if (bus == NULL) { xpt_unlock_buses(); return (retval); } bus->refcount++; xpt_unlock_buses(); } for (; bus != NULL; bus = next_bus) { retval = tr_func(bus, arg); if (retval == 0) { xpt_release_bus(bus); break; } xpt_lock_buses(); next_bus = TAILQ_NEXT(bus, links); if (next_bus) next_bus->refcount++; xpt_unlock_buses(); xpt_release_bus(bus); } return(retval); } static int xpttargettraverse(struct cam_eb *bus, struct cam_et *start_target, xpt_targetfunc_t *tr_func, void *arg) { struct cam_et *target, *next_target; int retval; retval = 1; if (start_target) target = start_target; else { mtx_lock(&bus->eb_mtx); target = TAILQ_FIRST(&bus->et_entries); if (target == NULL) { mtx_unlock(&bus->eb_mtx); return (retval); } target->refcount++; mtx_unlock(&bus->eb_mtx); } for (; target != NULL; target = next_target) { retval = tr_func(target, arg); if (retval == 0) { xpt_release_target(target); break; } mtx_lock(&bus->eb_mtx); next_target = TAILQ_NEXT(target, links); if (next_target) next_target->refcount++; mtx_unlock(&bus->eb_mtx); xpt_release_target(target); } return(retval); } static int xptdevicetraverse(struct cam_et *target, struct cam_ed *start_device, xpt_devicefunc_t *tr_func, void *arg) { struct cam_eb *bus; struct cam_ed *device, *next_device; int retval; retval = 1; bus = target->bus; if (start_device) device = start_device; else { mtx_lock(&bus->eb_mtx); device = TAILQ_FIRST(&target->ed_entries); if (device == NULL) { mtx_unlock(&bus->eb_mtx); return (retval); } device->refcount++; mtx_unlock(&bus->eb_mtx); } for (; device != NULL; device = next_device) { mtx_lock(&device->device_mtx); retval = tr_func(device, arg); mtx_unlock(&device->device_mtx); if (retval == 0) { xpt_release_device(device); break; } mtx_lock(&bus->eb_mtx); next_device = TAILQ_NEXT(device, links); if (next_device) next_device->refcount++; mtx_unlock(&bus->eb_mtx); xpt_release_device(device); } return(retval); } static int xptperiphtraverse(struct cam_ed *device, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg) { struct cam_eb *bus; struct cam_periph *periph, *next_periph; int retval; retval = 1; bus = device->target->bus; if (start_periph) periph = start_periph; else { xpt_lock_buses(); mtx_lock(&bus->eb_mtx); periph = SLIST_FIRST(&device->periphs); while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0) periph = SLIST_NEXT(periph, periph_links); if (periph == NULL) { mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); return (retval); } periph->refcount++; mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); } for (; periph != NULL; periph = next_periph) { retval = tr_func(periph, arg); if (retval == 0) { cam_periph_release_locked(periph); break; } xpt_lock_buses(); mtx_lock(&bus->eb_mtx); next_periph = SLIST_NEXT(periph, periph_links); while (next_periph != NULL && (next_periph->flags & CAM_PERIPH_FREE) != 0) next_periph = SLIST_NEXT(next_periph, periph_links); if (next_periph) next_periph->refcount++; mtx_unlock(&bus->eb_mtx); xpt_unlock_buses(); cam_periph_release_locked(periph); } return(retval); } static int xptpdrvtraverse(struct periph_driver **start_pdrv, xpt_pdrvfunc_t *tr_func, void *arg) { struct periph_driver **pdrv; int retval; retval = 1; /* * We don't traverse the peripheral driver list like we do the * other lists, because it is a linker set, and therefore cannot be * changed during runtime. If the peripheral driver list is ever * re-done to be something other than a linker set (i.e. it can * change while the system is running), the list traversal should * be modified to work like the other traversal functions. */ for (pdrv = (start_pdrv ? start_pdrv : periph_drivers); *pdrv != NULL; pdrv++) { retval = tr_func(pdrv, arg); if (retval == 0) return(retval); } return(retval); } static int xptpdperiphtraverse(struct periph_driver **pdrv, struct cam_periph *start_periph, xpt_periphfunc_t *tr_func, void *arg) { struct cam_periph *periph, *next_periph; int retval; retval = 1; if (start_periph) periph = start_periph; else { xpt_lock_buses(); periph = TAILQ_FIRST(&(*pdrv)->units); while (periph != NULL && (periph->flags & CAM_PERIPH_FREE) != 0) periph = TAILQ_NEXT(periph, unit_links); if (periph == NULL) { xpt_unlock_buses(); return (retval); } periph->refcount++; xpt_unlock_buses(); } for (; periph != NULL; periph = next_periph) { cam_periph_lock(periph); retval = tr_func(periph, arg); cam_periph_unlock(periph); if (retval == 0) { cam_periph_release(periph); break; } xpt_lock_buses(); next_periph = TAILQ_NEXT(periph, unit_links); while (next_periph != NULL && (next_periph->flags & CAM_PERIPH_FREE) != 0) next_periph = TAILQ_NEXT(next_periph, unit_links); if (next_periph) next_periph->refcount++; xpt_unlock_buses(); cam_periph_release(periph); } return(retval); } static int xptdefbusfunc(struct cam_eb *bus, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_BUS) { xpt_busfunc_t *tr_func; tr_func = (xpt_busfunc_t *)tr_config->tr_func; return(tr_func(bus, tr_config->tr_arg)); } else return(xpttargettraverse(bus, NULL, xptdeftargetfunc, arg)); } static int xptdeftargetfunc(struct cam_et *target, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_TARGET) { xpt_targetfunc_t *tr_func; tr_func = (xpt_targetfunc_t *)tr_config->tr_func; return(tr_func(target, tr_config->tr_arg)); } else return(xptdevicetraverse(target, NULL, xptdefdevicefunc, arg)); } static int xptdefdevicefunc(struct cam_ed *device, void *arg) { struct xpt_traverse_config *tr_config; tr_config = (struct xpt_traverse_config *)arg; if (tr_config->depth == XPT_DEPTH_DEVICE) { xpt_devicefunc_t *tr_func; tr_func = (xpt_devicefunc_t *)tr_config->tr_func; return(tr_func(device, tr_config->tr_arg)); } else return(xptperiphtraverse(device, NULL, xptdefperiphfunc, arg)); } static int xptdefperiphfunc(struct cam_periph *periph, void *arg) { struct xpt_traverse_config *tr_config; xpt_periphfunc_t *tr_func; tr_config = (struct xpt_traverse_config *)arg; tr_func = (xpt_periphfunc_t *)tr_config->tr_func; /* * Unlike the other default functions, we don't check for depth * here. The peripheral driver level is the last level in the EDT, * so if we're here, we should execute the function in question. */ return(tr_func(periph, tr_config->tr_arg)); } /* * Execute the given function for every bus in the EDT. */ static int xpt_for_all_busses(xpt_busfunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_BUS; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } /* * Execute the given function for every device in the EDT. */ static int xpt_for_all_devices(xpt_devicefunc_t *tr_func, void *arg) { struct xpt_traverse_config tr_config; tr_config.depth = XPT_DEPTH_DEVICE; tr_config.tr_func = tr_func; tr_config.tr_arg = arg; return(xptbustraverse(NULL, xptdefbusfunc, &tr_config)); } static int xptsetasyncfunc(struct cam_ed *device, void *arg) { struct cam_path path; struct ccb_getdev cgd; struct ccb_setasync *csa = (struct ccb_setasync *)arg; /* * Don't report unconfigured devices (Wildcard devs, * devices only for target mode, device instances * that have been invalidated but are waiting for * their last reference count to be released). */ if ((device->flags & CAM_DEV_UNCONFIGURED) != 0) return (1); memset(&cgd, 0, sizeof(cgd)); xpt_compile_path(&path, NULL, device->target->bus->path_id, device->target->target_id, device->lun_id); xpt_setup_ccb(&cgd.ccb_h, &path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); csa->callback(csa->callback_arg, AC_FOUND_DEVICE, &path, &cgd); xpt_release_path(&path); return(1); } static int xptsetasyncbusfunc(struct cam_eb *bus, void *arg) { struct cam_path path; struct ccb_pathinq cpi; struct ccb_setasync *csa = (struct ccb_setasync *)arg; xpt_compile_path(&path, /*periph*/NULL, bus->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); xpt_path_lock(&path); xpt_path_inq(&cpi, &path); csa->callback(csa->callback_arg, AC_PATH_REGISTERED, &path, &cpi); xpt_path_unlock(&path); xpt_release_path(&path); return(1); } void xpt_action(union ccb *start_ccb) { CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_action: func %#x %s\n", start_ccb->ccb_h.func_code, xpt_action_name(start_ccb->ccb_h.func_code))); start_ccb->ccb_h.status = CAM_REQ_INPROG; (*(start_ccb->ccb_h.path->bus->xport->ops->action))(start_ccb); } void xpt_action_default(union ccb *start_ccb) { struct cam_path *path; struct cam_sim *sim; struct mtx *mtx; path = start_ccb->ccb_h.path; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_action_default: func %#x %s\n", start_ccb->ccb_h.func_code, xpt_action_name(start_ccb->ccb_h.func_code))); switch (start_ccb->ccb_h.func_code) { case XPT_SCSI_IO: { struct cam_ed *device; /* * For the sake of compatibility with SCSI-1 * devices that may not understand the identify * message, we include lun information in the * second byte of all commands. SCSI-1 specifies * that luns are a 3 bit value and reserves only 3 * bits for lun information in the CDB. Later * revisions of the SCSI spec allow for more than 8 * luns, but have deprecated lun information in the * CDB. So, if the lun won't fit, we must omit. * * Also be aware that during initial probing for devices, * the inquiry information is unknown but initialized to 0. * This means that this code will be exercised while probing * devices with an ANSI revision greater than 2. */ device = path->device; if (device->protocol_version <= SCSI_REV_2 && start_ccb->ccb_h.target_lun < 8 && (start_ccb->ccb_h.flags & CAM_CDB_POINTER) == 0) { start_ccb->csio.cdb_io.cdb_bytes[1] |= start_ccb->ccb_h.target_lun << 5; } start_ccb->csio.scsi_status = SCSI_STATUS_OK; } /* FALLTHROUGH */ case XPT_TARGET_IO: case XPT_CONT_TARGET_IO: start_ccb->csio.sense_resid = 0; start_ccb->csio.resid = 0; /* FALLTHROUGH */ case XPT_ATA_IO: if (start_ccb->ccb_h.func_code == XPT_ATA_IO) start_ccb->ataio.resid = 0; /* FALLTHROUGH */ case XPT_NVME_IO: case XPT_NVME_ADMIN: case XPT_MMC_IO: case XPT_RESET_DEV: case XPT_ENG_EXEC: case XPT_SMP_IO: { struct cam_devq *devq; devq = path->bus->sim->devq; mtx_lock(&devq->send_mtx); cam_ccbq_insert_ccb(&path->device->ccbq, start_ccb); if (xpt_schedule_devq(devq, path->device) != 0) xpt_run_devq(devq); mtx_unlock(&devq->send_mtx); break; } case XPT_CALC_GEOMETRY: /* Filter out garbage */ if (start_ccb->ccg.block_size == 0 || start_ccb->ccg.volume_size == 0) { start_ccb->ccg.cylinders = 0; start_ccb->ccg.heads = 0; start_ccb->ccg.secs_per_track = 0; start_ccb->ccb_h.status = CAM_REQ_CMP; break; } goto call_sim; case XPT_ABORT: { union ccb* abort_ccb; abort_ccb = start_ccb->cab.abort_ccb; if (XPT_FC_IS_DEV_QUEUED(abort_ccb)) { struct cam_ed *device; struct cam_devq *devq; device = abort_ccb->ccb_h.path->device; devq = device->sim->devq; mtx_lock(&devq->send_mtx); if (abort_ccb->ccb_h.pinfo.index > 0) { cam_ccbq_remove_ccb(&device->ccbq, abort_ccb); abort_ccb->ccb_h.status = CAM_REQ_ABORTED|CAM_DEV_QFRZN; xpt_freeze_devq_device(device, 1); mtx_unlock(&devq->send_mtx); xpt_done(abort_ccb); start_ccb->ccb_h.status = CAM_REQ_CMP; break; } mtx_unlock(&devq->send_mtx); if (abort_ccb->ccb_h.pinfo.index == CAM_UNQUEUED_INDEX && (abort_ccb->ccb_h.status & CAM_SIM_QUEUED) == 0) { /* * We've caught this ccb en route to * the SIM. Flag it for abort and the * SIM will do so just before starting * real work on the CCB. */ abort_ccb->ccb_h.status = CAM_REQ_ABORTED|CAM_DEV_QFRZN; xpt_freeze_devq(abort_ccb->ccb_h.path, 1); start_ccb->ccb_h.status = CAM_REQ_CMP; break; } } if (XPT_FC_IS_QUEUED(abort_ccb) && (abort_ccb->ccb_h.pinfo.index == CAM_DONEQ_INDEX)) { /* * It's already completed but waiting * for our SWI to get to it. */ start_ccb->ccb_h.status = CAM_UA_ABORT; break; } /* * If we weren't able to take care of the abort request * in the XPT, pass the request down to the SIM for processing. */ } /* FALLTHROUGH */ case XPT_ACCEPT_TARGET_IO: case XPT_EN_LUN: case XPT_IMMED_NOTIFY: case XPT_NOTIFY_ACK: case XPT_RESET_BUS: case XPT_IMMEDIATE_NOTIFY: case XPT_NOTIFY_ACKNOWLEDGE: case XPT_GET_SIM_KNOB_OLD: case XPT_GET_SIM_KNOB: case XPT_SET_SIM_KNOB: case XPT_GET_TRAN_SETTINGS: case XPT_SET_TRAN_SETTINGS: case XPT_PATH_INQ: call_sim: sim = path->bus->sim; mtx = sim->mtx; if (mtx && !mtx_owned(mtx)) mtx_lock(mtx); else mtx = NULL; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("Calling sim->sim_action(): func=%#x\n", start_ccb->ccb_h.func_code)); (*(sim->sim_action))(sim, start_ccb); CAM_DEBUG(path, CAM_DEBUG_TRACE, ("sim->sim_action returned: status=%#x\n", start_ccb->ccb_h.status)); if (mtx) mtx_unlock(mtx); break; case XPT_PATH_STATS: start_ccb->cpis.last_reset = path->bus->last_reset; start_ccb->ccb_h.status = CAM_REQ_CMP; break; case XPT_GDEV_TYPE: { struct cam_ed *dev; dev = path->device; if ((dev->flags & CAM_DEV_UNCONFIGURED) != 0) { start_ccb->ccb_h.status = CAM_DEV_NOT_THERE; } else { struct ccb_getdev *cgd; cgd = &start_ccb->cgd; cgd->protocol = dev->protocol; cgd->inq_data = dev->inq_data; cgd->ident_data = dev->ident_data; cgd->inq_flags = dev->inq_flags; cgd->ccb_h.status = CAM_REQ_CMP; cgd->serial_num_len = dev->serial_num_len; if ((dev->serial_num_len > 0) && (dev->serial_num != NULL)) bcopy(dev->serial_num, cgd->serial_num, dev->serial_num_len); } break; } case XPT_GDEV_STATS: { struct ccb_getdevstats *cgds = &start_ccb->cgds; struct cam_ed *dev = path->device; struct cam_eb *bus = path->bus; struct cam_et *tar = path->target; struct cam_devq *devq = bus->sim->devq; mtx_lock(&devq->send_mtx); cgds->dev_openings = dev->ccbq.dev_openings; cgds->dev_active = dev->ccbq.dev_active; cgds->allocated = dev->ccbq.allocated; cgds->queued = cam_ccbq_pending_ccb_count(&dev->ccbq); cgds->held = cgds->allocated - cgds->dev_active - cgds->queued; cgds->last_reset = tar->last_reset; cgds->maxtags = dev->maxtags; cgds->mintags = dev->mintags; if (timevalcmp(&tar->last_reset, &bus->last_reset, <)) cgds->last_reset = bus->last_reset; mtx_unlock(&devq->send_mtx); cgds->ccb_h.status = CAM_REQ_CMP; break; } case XPT_GDEVLIST: { struct cam_periph *nperiph; struct periph_list *periph_head; struct ccb_getdevlist *cgdl; u_int i; struct cam_ed *device; int found; found = 0; /* * Don't want anyone mucking with our data. */ device = path->device; periph_head = &device->periphs; cgdl = &start_ccb->cgdl; /* * Check and see if the list has changed since the user * last requested a list member. If so, tell them that the * list has changed, and therefore they need to start over * from the beginning. */ if ((cgdl->index != 0) && (cgdl->generation != device->generation)) { cgdl->status = CAM_GDEVLIST_LIST_CHANGED; break; } /* * Traverse the list of peripherals and attempt to find * the requested peripheral. */ for (nperiph = SLIST_FIRST(periph_head), i = 0; (nperiph != NULL) && (i <= cgdl->index); nperiph = SLIST_NEXT(nperiph, periph_links), i++) { if (i == cgdl->index) { strlcpy(cgdl->periph_name, nperiph->periph_name, sizeof(cgdl->periph_name)); cgdl->unit_number = nperiph->unit_number; found = 1; } } if (found == 0) { cgdl->status = CAM_GDEVLIST_ERROR; break; } if (nperiph == NULL) cgdl->status = CAM_GDEVLIST_LAST_DEVICE; else cgdl->status = CAM_GDEVLIST_MORE_DEVS; cgdl->index++; cgdl->generation = device->generation; cgdl->ccb_h.status = CAM_REQ_CMP; break; } case XPT_DEV_MATCH: { dev_pos_type position_type; struct ccb_dev_match *cdm; cdm = &start_ccb->cdm; /* * There are two ways of getting at information in the EDT. * The first way is via the primary EDT tree. It starts * with a list of buses, then a list of targets on a bus, * then devices/luns on a target, and then peripherals on a * device/lun. The "other" way is by the peripheral driver * lists. The peripheral driver lists are organized by * peripheral driver. (obviously) So it makes sense to * use the peripheral driver list if the user is looking * for something like "da1", or all "da" devices. If the * user is looking for something on a particular bus/target * or lun, it's generally better to go through the EDT tree. */ if (cdm->pos.position_type != CAM_DEV_POS_NONE) position_type = cdm->pos.position_type; else { u_int i; position_type = CAM_DEV_POS_NONE; for (i = 0; i < cdm->num_patterns; i++) { if ((cdm->patterns[i].type == DEV_MATCH_BUS) ||(cdm->patterns[i].type == DEV_MATCH_DEVICE)){ position_type = CAM_DEV_POS_EDT; break; } } if (cdm->num_patterns == 0) position_type = CAM_DEV_POS_EDT; else if (position_type == CAM_DEV_POS_NONE) position_type = CAM_DEV_POS_PDRV; } switch(position_type & CAM_DEV_POS_TYPEMASK) { case CAM_DEV_POS_EDT: xptedtmatch(cdm); break; case CAM_DEV_POS_PDRV: xptperiphlistmatch(cdm); break; default: cdm->status = CAM_DEV_MATCH_ERROR; break; } if (cdm->status == CAM_DEV_MATCH_ERROR) start_ccb->ccb_h.status = CAM_REQ_CMP_ERR; else start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_SASYNC_CB: { struct ccb_setasync *csa; struct async_node *cur_entry; struct async_list *async_head; u_int32_t added; csa = &start_ccb->csa; added = csa->event_enable; async_head = &path->device->asyncs; /* * If there is already an entry for us, simply * update it. */ cur_entry = SLIST_FIRST(async_head); while (cur_entry != NULL) { if ((cur_entry->callback_arg == csa->callback_arg) && (cur_entry->callback == csa->callback)) break; cur_entry = SLIST_NEXT(cur_entry, links); } if (cur_entry != NULL) { /* * If the request has no flags set, * remove the entry. */ added &= ~cur_entry->event_enable; if (csa->event_enable == 0) { SLIST_REMOVE(async_head, cur_entry, async_node, links); xpt_release_device(path->device); free(cur_entry, M_CAMXPT); } else { cur_entry->event_enable = csa->event_enable; } csa->event_enable = added; } else { cur_entry = malloc(sizeof(*cur_entry), M_CAMXPT, M_NOWAIT); if (cur_entry == NULL) { csa->ccb_h.status = CAM_RESRC_UNAVAIL; break; } cur_entry->event_enable = csa->event_enable; cur_entry->event_lock = (path->bus->sim->mtx && mtx_owned(path->bus->sim->mtx)) ? 1 : 0; cur_entry->callback_arg = csa->callback_arg; cur_entry->callback = csa->callback; SLIST_INSERT_HEAD(async_head, cur_entry, links); xpt_acquire_device(path->device); } start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_REL_SIMQ: { struct ccb_relsim *crs; struct cam_ed *dev; crs = &start_ccb->crs; dev = path->device; if (dev == NULL) { crs->ccb_h.status = CAM_DEV_NOT_THERE; break; } if ((crs->release_flags & RELSIM_ADJUST_OPENINGS) != 0) { /* Don't ever go below one opening */ if (crs->openings > 0) { xpt_dev_ccbq_resize(path, crs->openings); if (bootverbose) { xpt_print(path, "number of openings is now %d\n", crs->openings); } } } mtx_lock(&dev->sim->devq->send_mtx); if ((crs->release_flags & RELSIM_RELEASE_AFTER_TIMEOUT) != 0) { if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) { /* * Just extend the old timeout and decrement * the freeze count so that a single timeout * is sufficient for releasing the queue. */ start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; callout_stop(&dev->callout); } else { start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } callout_reset_sbt(&dev->callout, SBT_1MS * crs->release_timeout, 0, xpt_release_devq_timeout, dev, 0); dev->flags |= CAM_DEV_REL_TIMEOUT_PENDING; } if ((crs->release_flags & RELSIM_RELEASE_AFTER_CMDCMPLT) != 0) { if ((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0) { /* * Decrement the freeze count so that a single * completion is still sufficient to unfreeze * the queue. */ start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; } else { dev->flags |= CAM_DEV_REL_ON_COMPLETE; start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } } if ((crs->release_flags & RELSIM_RELEASE_AFTER_QEMPTY) != 0) { if ((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0 || (dev->ccbq.dev_active == 0)) { start_ccb->ccb_h.flags &= ~CAM_DEV_QFREEZE; } else { dev->flags |= CAM_DEV_REL_ON_QUEUE_EMPTY; start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; } } mtx_unlock(&dev->sim->devq->send_mtx); if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) == 0) xpt_release_devq(path, /*count*/1, /*run_queue*/TRUE); start_ccb->crs.qfrozen_cnt = dev->ccbq.queue.qfrozen_cnt; start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_DEBUG: { struct cam_path *oldpath; /* Check that all request bits are supported. */ if (start_ccb->cdbg.flags & ~(CAM_DEBUG_COMPILE)) { start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; break; } cam_dflags = CAM_DEBUG_NONE; if (cam_dpath != NULL) { oldpath = cam_dpath; cam_dpath = NULL; xpt_free_path(oldpath); } if (start_ccb->cdbg.flags != CAM_DEBUG_NONE) { if (xpt_create_path(&cam_dpath, NULL, start_ccb->ccb_h.path_id, start_ccb->ccb_h.target_id, start_ccb->ccb_h.target_lun) != CAM_REQ_CMP) { start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; } else { cam_dflags = start_ccb->cdbg.flags; start_ccb->ccb_h.status = CAM_REQ_CMP; xpt_print(cam_dpath, "debugging flags now %x\n", cam_dflags); } } else start_ccb->ccb_h.status = CAM_REQ_CMP; break; } case XPT_NOOP: if ((start_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) xpt_freeze_devq(path, 1); start_ccb->ccb_h.status = CAM_REQ_CMP; break; case XPT_REPROBE_LUN: xpt_async(AC_INQ_CHANGED, path, NULL); start_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(start_ccb); break; case XPT_ASYNC: /* * Queue the async operation so it can be run from a sleepable * context. */ start_ccb->ccb_h.status = CAM_REQ_CMP; mtx_lock(&cam_async.cam_doneq_mtx); STAILQ_INSERT_TAIL(&cam_async.cam_doneq, &start_ccb->ccb_h, sim_links.stqe); start_ccb->ccb_h.pinfo.index = CAM_ASYNC_INDEX; mtx_unlock(&cam_async.cam_doneq_mtx); wakeup(&cam_async.cam_doneq); break; default: case XPT_SDEV_TYPE: case XPT_TERM_IO: case XPT_ENG_INQ: /* XXX Implement */ xpt_print(start_ccb->ccb_h.path, "%s: CCB type %#x %s not supported\n", __func__, start_ccb->ccb_h.func_code, xpt_action_name(start_ccb->ccb_h.func_code)); start_ccb->ccb_h.status = CAM_PROVIDE_FAIL; if (start_ccb->ccb_h.func_code & XPT_FC_DEV_QUEUED) { xpt_done(start_ccb); } break; } CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_action_default: func= %#x %s status %#x\n", start_ccb->ccb_h.func_code, xpt_action_name(start_ccb->ccb_h.func_code), start_ccb->ccb_h.status)); } /* * Call the sim poll routine to allow the sim to complete * any inflight requests, then call camisr_runqueue to * complete any CCB that the polling completed. */ void xpt_sim_poll(struct cam_sim *sim) { struct mtx *mtx; KASSERT(cam_sim_pollable(sim), ("%s: non-pollable sim", __func__)); mtx = sim->mtx; if (mtx) mtx_lock(mtx); (*(sim->sim_poll))(sim); if (mtx) mtx_unlock(mtx); camisr_runqueue(); } uint32_t xpt_poll_setup(union ccb *start_ccb) { u_int32_t timeout; struct cam_sim *sim; struct cam_devq *devq; struct cam_ed *dev; timeout = start_ccb->ccb_h.timeout * 10; sim = start_ccb->ccb_h.path->bus->sim; devq = sim->devq; dev = start_ccb->ccb_h.path->device; KASSERT(cam_sim_pollable(sim), ("%s: non-pollable sim", __func__)); /* * Steal an opening so that no other queued requests * can get it before us while we simulate interrupts. */ mtx_lock(&devq->send_mtx); dev->ccbq.dev_openings--; while((devq->send_openings <= 0 || dev->ccbq.dev_openings < 0) && (--timeout > 0)) { mtx_unlock(&devq->send_mtx); DELAY(100); xpt_sim_poll(sim); mtx_lock(&devq->send_mtx); } dev->ccbq.dev_openings++; mtx_unlock(&devq->send_mtx); return (timeout); } void xpt_pollwait(union ccb *start_ccb, uint32_t timeout) { KASSERT(cam_sim_pollable(start_ccb->ccb_h.path->bus->sim), ("%s: non-pollable sim", __func__)); while (--timeout > 0) { xpt_sim_poll(start_ccb->ccb_h.path->bus->sim); if ((start_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_INPROG) break; DELAY(100); } if (timeout == 0) { /* * XXX Is it worth adding a sim_timeout entry * point so we can attempt recovery? If * this is only used for dumps, I don't think * it is. */ start_ccb->ccb_h.status = CAM_CMD_TIMEOUT; } } void xpt_polled_action(union ccb *start_ccb) { uint32_t timeout; struct cam_ed *dev; timeout = start_ccb->ccb_h.timeout * 10; dev = start_ccb->ccb_h.path->device; mtx_unlock(&dev->device_mtx); timeout = xpt_poll_setup(start_ccb); if (timeout > 0) { xpt_action(start_ccb); xpt_pollwait(start_ccb, timeout); } else { start_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; } mtx_lock(&dev->device_mtx); } /* * Schedule a peripheral driver to receive a ccb when its * target device has space for more transactions. */ void xpt_schedule(struct cam_periph *periph, u_int32_t new_priority) { CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("xpt_schedule\n")); cam_periph_assert(periph, MA_OWNED); if (new_priority < periph->scheduled_priority) { periph->scheduled_priority = new_priority; xpt_run_allocq(periph, 0); } } /* * Schedule a device to run on a given queue. * If the device was inserted as a new entry on the queue, * return 1 meaning the device queue should be run. If we * were already queued, implying someone else has already * started the queue, return 0 so the caller doesn't attempt * to run the queue. */ static int xpt_schedule_dev(struct camq *queue, cam_pinfo *pinfo, u_int32_t new_priority) { int retval; u_int32_t old_priority; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_schedule_dev\n")); old_priority = pinfo->priority; /* * Are we already queued? */ if (pinfo->index != CAM_UNQUEUED_INDEX) { /* Simply reorder based on new priority */ if (new_priority < old_priority) { camq_change_priority(queue, pinfo->index, new_priority); CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("changed priority to %d\n", new_priority)); retval = 1; } else retval = 0; } else { /* New entry on the queue */ if (new_priority < old_priority) pinfo->priority = new_priority; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("Inserting onto queue\n")); pinfo->generation = ++queue->generation; camq_insert(queue, pinfo); retval = 1; } return (retval); } static void xpt_run_allocq_task(void *context, int pending) { struct cam_periph *periph = context; cam_periph_lock(periph); periph->flags &= ~CAM_PERIPH_RUN_TASK; xpt_run_allocq(periph, 1); cam_periph_unlock(periph); cam_periph_release(periph); } static void xpt_run_allocq(struct cam_periph *periph, int sleep) { struct cam_ed *device; union ccb *ccb; uint32_t prio; cam_periph_assert(periph, MA_OWNED); if (periph->periph_allocating) return; cam_periph_doacquire(periph); periph->periph_allocating = 1; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_allocq(%p)\n", periph)); device = periph->path->device; ccb = NULL; restart: while ((prio = min(periph->scheduled_priority, periph->immediate_priority)) != CAM_PRIORITY_NONE && (periph->periph_allocated - (ccb != NULL ? 1 : 0) < device->ccbq.total_openings || prio <= CAM_PRIORITY_OOB)) { if (ccb == NULL && (ccb = xpt_get_ccb_nowait(periph)) == NULL) { if (sleep) { ccb = xpt_get_ccb(periph); goto restart; } if (periph->flags & CAM_PERIPH_RUN_TASK) break; cam_periph_doacquire(periph); periph->flags |= CAM_PERIPH_RUN_TASK; taskqueue_enqueue(xsoftc.xpt_taskq, &periph->periph_run_task); break; } xpt_setup_ccb(&ccb->ccb_h, periph->path, prio); if (prio == periph->immediate_priority) { periph->immediate_priority = CAM_PRIORITY_NONE; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("waking cam_periph_getccb()\n")); SLIST_INSERT_HEAD(&periph->ccb_list, &ccb->ccb_h, periph_links.sle); wakeup(&periph->ccb_list); } else { periph->scheduled_priority = CAM_PRIORITY_NONE; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("calling periph_start()\n")); periph->periph_start(periph, ccb); } ccb = NULL; } if (ccb != NULL) xpt_release_ccb(ccb); periph->periph_allocating = 0; cam_periph_release_locked(periph); } static void xpt_run_devq(struct cam_devq *devq) { struct mtx *mtx; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_run_devq\n")); devq->send_queue.qfrozen_cnt++; while ((devq->send_queue.entries > 0) && (devq->send_openings > 0) && (devq->send_queue.qfrozen_cnt <= 1)) { struct cam_ed *device; union ccb *work_ccb; struct cam_sim *sim; struct xpt_proto *proto; device = (struct cam_ed *)camq_remove(&devq->send_queue, CAMQ_HEAD); CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("running device %p\n", device)); work_ccb = cam_ccbq_peek_ccb(&device->ccbq, CAMQ_HEAD); if (work_ccb == NULL) { printf("device on run queue with no ccbs???\n"); continue; } if ((work_ccb->ccb_h.flags & CAM_HIGH_POWER) != 0) { mtx_lock(&xsoftc.xpt_highpower_lock); if (xsoftc.num_highpower <= 0) { /* * We got a high power command, but we * don't have any available slots. Freeze * the device queue until we have a slot * available. */ xpt_freeze_devq_device(device, 1); STAILQ_INSERT_TAIL(&xsoftc.highpowerq, device, highpowerq_entry); mtx_unlock(&xsoftc.xpt_highpower_lock); continue; } else { /* * Consume a high power slot while * this ccb runs. */ xsoftc.num_highpower--; } mtx_unlock(&xsoftc.xpt_highpower_lock); } cam_ccbq_remove_ccb(&device->ccbq, work_ccb); cam_ccbq_send_ccb(&device->ccbq, work_ccb); devq->send_openings--; devq->send_active++; xpt_schedule_devq(devq, device); mtx_unlock(&devq->send_mtx); if ((work_ccb->ccb_h.flags & CAM_DEV_QFREEZE) != 0) { /* * The client wants to freeze the queue * after this CCB is sent. */ xpt_freeze_devq(work_ccb->ccb_h.path, 1); } /* In Target mode, the peripheral driver knows best... */ if (work_ccb->ccb_h.func_code == XPT_SCSI_IO) { if ((device->inq_flags & SID_CmdQue) != 0 && work_ccb->csio.tag_action != CAM_TAG_ACTION_NONE) work_ccb->ccb_h.flags |= CAM_TAG_ACTION_VALID; else /* * Clear this in case of a retried CCB that * failed due to a rejected tag. */ work_ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID; } KASSERT(device == work_ccb->ccb_h.path->device, ("device (%p) / path->device (%p) mismatch", device, work_ccb->ccb_h.path->device)); proto = xpt_proto_find(device->protocol); if (proto && proto->ops->debug_out) proto->ops->debug_out(work_ccb); /* * Device queues can be shared among multiple SIM instances * that reside on different buses. Use the SIM from the * queued device, rather than the one from the calling bus. */ sim = device->sim; mtx = sim->mtx; if (mtx && !mtx_owned(mtx)) mtx_lock(mtx); else mtx = NULL; work_ccb->ccb_h.qos.periph_data = cam_iosched_now(); (*(sim->sim_action))(sim, work_ccb); if (mtx) mtx_unlock(mtx); mtx_lock(&devq->send_mtx); } devq->send_queue.qfrozen_cnt--; } /* * This function merges stuff from the src ccb into the dst ccb, while keeping * important fields in the dst ccb constant. */ void xpt_merge_ccb(union ccb *dst_ccb, union ccb *src_ccb) { /* * Pull fields that are valid for peripheral drivers to set * into the dst CCB along with the CCB "payload". */ dst_ccb->ccb_h.retry_count = src_ccb->ccb_h.retry_count; dst_ccb->ccb_h.func_code = src_ccb->ccb_h.func_code; dst_ccb->ccb_h.timeout = src_ccb->ccb_h.timeout; dst_ccb->ccb_h.flags = src_ccb->ccb_h.flags; bcopy(&(&src_ccb->ccb_h)[1], &(&dst_ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); } void xpt_setup_ccb_flags(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority, u_int32_t flags) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_setup_ccb\n")); ccb_h->pinfo.priority = priority; ccb_h->path = path; ccb_h->path_id = path->bus->path_id; if (path->target) ccb_h->target_id = path->target->target_id; else ccb_h->target_id = CAM_TARGET_WILDCARD; if (path->device) { ccb_h->target_lun = path->device->lun_id; ccb_h->pinfo.generation = ++path->device->ccbq.queue.generation; } else { ccb_h->target_lun = CAM_TARGET_WILDCARD; } ccb_h->pinfo.index = CAM_UNQUEUED_INDEX; ccb_h->flags = flags; ccb_h->xflags = 0; } void xpt_setup_ccb(struct ccb_hdr *ccb_h, struct cam_path *path, u_int32_t priority) { xpt_setup_ccb_flags(ccb_h, path, priority, /*flags*/ 0); } /* Path manipulation functions */ cam_status xpt_create_path(struct cam_path **new_path_ptr, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { struct cam_path *path; cam_status status; path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT); if (path == NULL) { status = CAM_RESRC_UNAVAIL; return(status); } status = xpt_compile_path(path, perph, path_id, target_id, lun_id); if (status != CAM_REQ_CMP) { free(path, M_CAMPATH); path = NULL; } *new_path_ptr = path; return (status); } cam_status xpt_create_path_unlocked(struct cam_path **new_path_ptr, struct cam_periph *periph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { return (xpt_create_path(new_path_ptr, periph, path_id, target_id, lun_id)); } cam_status xpt_compile_path(struct cam_path *new_path, struct cam_periph *perph, path_id_t path_id, target_id_t target_id, lun_id_t lun_id) { struct cam_eb *bus; struct cam_et *target; struct cam_ed *device; cam_status status; status = CAM_REQ_CMP; /* Completed without error */ target = NULL; /* Wildcarded */ device = NULL; /* Wildcarded */ /* * We will potentially modify the EDT, so block interrupts * that may attempt to create cam paths. */ bus = xpt_find_bus(path_id); if (bus == NULL) { status = CAM_PATH_INVALID; } else { xpt_lock_buses(); mtx_lock(&bus->eb_mtx); target = xpt_find_target(bus, target_id); if (target == NULL) { /* Create one */ struct cam_et *new_target; new_target = xpt_alloc_target(bus, target_id); if (new_target == NULL) { status = CAM_RESRC_UNAVAIL; } else { target = new_target; } } xpt_unlock_buses(); if (target != NULL) { device = xpt_find_device(target, lun_id); if (device == NULL) { /* Create one */ struct cam_ed *new_device; new_device = (*(bus->xport->ops->alloc_device))(bus, target, lun_id); if (new_device == NULL) { status = CAM_RESRC_UNAVAIL; } else { device = new_device; } } } mtx_unlock(&bus->eb_mtx); } /* * Only touch the user's data if we are successful. */ if (status == CAM_REQ_CMP) { new_path->periph = perph; new_path->bus = bus; new_path->target = target; new_path->device = device; CAM_DEBUG(new_path, CAM_DEBUG_TRACE, ("xpt_compile_path\n")); } else { if (device != NULL) xpt_release_device(device); if (target != NULL) xpt_release_target(target); if (bus != NULL) xpt_release_bus(bus); } return (status); } cam_status xpt_clone_path(struct cam_path **new_path_ptr, struct cam_path *path) { struct cam_path *new_path; new_path = (struct cam_path *)malloc(sizeof(*path), M_CAMPATH, M_NOWAIT); if (new_path == NULL) return(CAM_RESRC_UNAVAIL); *new_path = *path; if (path->bus != NULL) xpt_acquire_bus(path->bus); if (path->target != NULL) xpt_acquire_target(path->target); if (path->device != NULL) xpt_acquire_device(path->device); *new_path_ptr = new_path; return (CAM_REQ_CMP); } void xpt_release_path(struct cam_path *path) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_path\n")); if (path->device != NULL) { xpt_release_device(path->device); path->device = NULL; } if (path->target != NULL) { xpt_release_target(path->target); path->target = NULL; } if (path->bus != NULL) { xpt_release_bus(path->bus); path->bus = NULL; } } void xpt_free_path(struct cam_path *path) { CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_free_path\n")); xpt_release_path(path); free(path, M_CAMPATH); } void xpt_path_counts(struct cam_path *path, uint32_t *bus_ref, uint32_t *periph_ref, uint32_t *target_ref, uint32_t *device_ref) { xpt_lock_buses(); if (bus_ref) { if (path->bus) *bus_ref = path->bus->refcount; else *bus_ref = 0; } if (periph_ref) { if (path->periph) *periph_ref = path->periph->refcount; else *periph_ref = 0; } xpt_unlock_buses(); if (target_ref) { if (path->target) *target_ref = path->target->refcount; else *target_ref = 0; } if (device_ref) { if (path->device) *device_ref = path->device->refcount; else *device_ref = 0; } } /* * Return -1 for failure, 0 for exact match, 1 for match with wildcards * in path1, 2 for match with wildcards in path2. */ int xpt_path_comp(struct cam_path *path1, struct cam_path *path2) { int retval = 0; if (path1->bus != path2->bus) { if (path1->bus->path_id == CAM_BUS_WILDCARD) retval = 1; else if (path2->bus->path_id == CAM_BUS_WILDCARD) retval = 2; else return (-1); } if (path1->target != path2->target) { if (path1->target->target_id == CAM_TARGET_WILDCARD) { if (retval == 0) retval = 1; } else if (path2->target->target_id == CAM_TARGET_WILDCARD) retval = 2; else return (-1); } if (path1->device != path2->device) { if (path1->device->lun_id == CAM_LUN_WILDCARD) { if (retval == 0) retval = 1; } else if (path2->device->lun_id == CAM_LUN_WILDCARD) retval = 2; else return (-1); } return (retval); } int xpt_path_comp_dev(struct cam_path *path, struct cam_ed *dev) { int retval = 0; if (path->bus != dev->target->bus) { if (path->bus->path_id == CAM_BUS_WILDCARD) retval = 1; else if (dev->target->bus->path_id == CAM_BUS_WILDCARD) retval = 2; else return (-1); } if (path->target != dev->target) { if (path->target->target_id == CAM_TARGET_WILDCARD) { if (retval == 0) retval = 1; } else if (dev->target->target_id == CAM_TARGET_WILDCARD) retval = 2; else return (-1); } if (path->device != dev) { if (path->device->lun_id == CAM_LUN_WILDCARD) { if (retval == 0) retval = 1; } else if (dev->lun_id == CAM_LUN_WILDCARD) retval = 2; else return (-1); } return (retval); } void xpt_print_path(struct cam_path *path) { struct sbuf sb; char buffer[XPT_PRINT_LEN]; sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN); xpt_path_sbuf(path, &sb); sbuf_finish(&sb); printf("%s", sbuf_data(&sb)); sbuf_delete(&sb); } void xpt_print_device(struct cam_ed *device) { if (device == NULL) printf("(nopath): "); else { printf("(noperiph:%s%d:%d:%d:%jx): ", device->sim->sim_name, device->sim->unit_number, device->sim->bus_id, device->target->target_id, (uintmax_t)device->lun_id); } } void xpt_print(struct cam_path *path, const char *fmt, ...) { va_list ap; struct sbuf sb; char buffer[XPT_PRINT_LEN]; sbuf_new(&sb, buffer, XPT_PRINT_LEN, SBUF_FIXEDLEN); xpt_path_sbuf(path, &sb); va_start(ap, fmt); sbuf_vprintf(&sb, fmt, ap); va_end(ap); sbuf_finish(&sb); printf("%s", sbuf_data(&sb)); sbuf_delete(&sb); } int xpt_path_string(struct cam_path *path, char *str, size_t str_len) { struct sbuf sb; int len; sbuf_new(&sb, str, str_len, 0); len = xpt_path_sbuf(path, &sb); sbuf_finish(&sb); return (len); } int xpt_path_sbuf(struct cam_path *path, struct sbuf *sb) { if (path == NULL) sbuf_printf(sb, "(nopath): "); else { if (path->periph != NULL) sbuf_printf(sb, "(%s%d:", path->periph->periph_name, path->periph->unit_number); else sbuf_printf(sb, "(noperiph:"); if (path->bus != NULL) sbuf_printf(sb, "%s%d:%d:", path->bus->sim->sim_name, path->bus->sim->unit_number, path->bus->sim->bus_id); else sbuf_printf(sb, "nobus:"); if (path->target != NULL) sbuf_printf(sb, "%d:", path->target->target_id); else sbuf_printf(sb, "X:"); if (path->device != NULL) sbuf_printf(sb, "%jx): ", (uintmax_t)path->device->lun_id); else sbuf_printf(sb, "X): "); } return(sbuf_len(sb)); } path_id_t xpt_path_path_id(struct cam_path *path) { return(path->bus->path_id); } target_id_t xpt_path_target_id(struct cam_path *path) { if (path->target != NULL) return (path->target->target_id); else return (CAM_TARGET_WILDCARD); } lun_id_t xpt_path_lun_id(struct cam_path *path) { if (path->device != NULL) return (path->device->lun_id); else return (CAM_LUN_WILDCARD); } struct cam_sim * xpt_path_sim(struct cam_path *path) { return (path->bus->sim); } struct cam_periph* xpt_path_periph(struct cam_path *path) { return (path->periph); } /* * Release a CAM control block for the caller. Remit the cost of the structure * to the device referenced by the path. If the this device had no 'credits' * and peripheral drivers have registered async callbacks for this notification * call them now. */ void xpt_release_ccb(union ccb *free_ccb) { struct cam_ed *device; struct cam_periph *periph; CAM_DEBUG_PRINT(CAM_DEBUG_XPT, ("xpt_release_ccb\n")); xpt_path_assert(free_ccb->ccb_h.path, MA_OWNED); device = free_ccb->ccb_h.path->device; periph = free_ccb->ccb_h.path->periph; xpt_free_ccb(free_ccb); periph->periph_allocated--; cam_ccbq_release_opening(&device->ccbq); xpt_run_allocq(periph, 0); } /* Functions accessed by SIM drivers */ static struct xpt_xport_ops xport_default_ops = { .alloc_device = xpt_alloc_device_default, .action = xpt_action_default, .async = xpt_dev_async_default, }; static struct xpt_xport xport_default = { .xport = XPORT_UNKNOWN, .name = "unknown", .ops = &xport_default_ops, }; CAM_XPT_XPORT(xport_default); /* * A sim structure, listing the SIM entry points and instance * identification info is passed to xpt_bus_register to hook the SIM * into the CAM framework. xpt_bus_register creates a cam_eb entry * for this new bus and places it in the array of buses and assigns * it a path_id. The path_id may be influenced by "hard wiring" * information specified by the user. Once interrupt services are * available, the bus will be probed. */ int32_t xpt_bus_register(struct cam_sim *sim, device_t parent, u_int32_t bus) { struct cam_eb *new_bus; struct cam_eb *old_bus; struct ccb_pathinq cpi; struct cam_path *path; cam_status status; sim->bus_id = bus; new_bus = (struct cam_eb *)malloc(sizeof(*new_bus), M_CAMXPT, M_NOWAIT|M_ZERO); if (new_bus == NULL) { /* Couldn't satisfy request */ return (CAM_RESRC_UNAVAIL); } mtx_init(&new_bus->eb_mtx, "CAM bus lock", NULL, MTX_DEF); TAILQ_INIT(&new_bus->et_entries); cam_sim_hold(sim); new_bus->sim = sim; timevalclear(&new_bus->last_reset); new_bus->flags = 0; new_bus->refcount = 1; /* Held until a bus_deregister event */ new_bus->generation = 0; xpt_lock_buses(); sim->path_id = new_bus->path_id = xptpathid(sim->sim_name, sim->unit_number, sim->bus_id); old_bus = TAILQ_FIRST(&xsoftc.xpt_busses); while (old_bus != NULL && old_bus->path_id < new_bus->path_id) old_bus = TAILQ_NEXT(old_bus, links); if (old_bus != NULL) TAILQ_INSERT_BEFORE(old_bus, new_bus, links); else TAILQ_INSERT_TAIL(&xsoftc.xpt_busses, new_bus, links); xsoftc.bus_generation++; xpt_unlock_buses(); /* * Set a default transport so that a PATH_INQ can be issued to * the SIM. This will then allow for probing and attaching of * a more appropriate transport. */ new_bus->xport = &xport_default; status = xpt_create_path(&path, /*periph*/NULL, sim->path_id, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) { xpt_release_bus(new_bus); return (CAM_RESRC_UNAVAIL); } xpt_path_inq(&cpi, path); if (cpi.ccb_h.status == CAM_REQ_CMP) { struct xpt_xport **xpt; SET_FOREACH(xpt, cam_xpt_xport_set) { if ((*xpt)->xport == cpi.transport) { new_bus->xport = *xpt; break; } } if (new_bus->xport == NULL) { xpt_print(path, "No transport found for %d\n", cpi.transport); xpt_release_bus(new_bus); free(path, M_CAMXPT); return (CAM_RESRC_UNAVAIL); } } /* Notify interested parties */ if (sim->path_id != CAM_XPT_PATH_ID) { xpt_async(AC_PATH_REGISTERED, path, &cpi); if ((cpi.hba_misc & PIM_NOSCAN) == 0) { union ccb *scan_ccb; /* Initiate bus rescan. */ scan_ccb = xpt_alloc_ccb_nowait(); if (scan_ccb != NULL) { scan_ccb->ccb_h.path = path; scan_ccb->ccb_h.func_code = XPT_SCAN_BUS; scan_ccb->crcn.flags = 0; xpt_rescan(scan_ccb); } else { xpt_print(path, "Can't allocate CCB to scan bus\n"); xpt_free_path(path); } } else xpt_free_path(path); } else xpt_free_path(path); return (CAM_SUCCESS); } int32_t xpt_bus_deregister(path_id_t pathid) { struct cam_path bus_path; cam_status status; status = xpt_compile_path(&bus_path, NULL, pathid, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) return (status); xpt_async(AC_LOST_DEVICE, &bus_path, NULL); xpt_async(AC_PATH_DEREGISTERED, &bus_path, NULL); /* Release the reference count held while registered. */ xpt_release_bus(bus_path.bus); xpt_release_path(&bus_path); return (CAM_REQ_CMP); } static path_id_t xptnextfreepathid(void) { struct cam_eb *bus; path_id_t pathid; const char *strval; mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED); pathid = 0; bus = TAILQ_FIRST(&xsoftc.xpt_busses); retry: /* Find an unoccupied pathid */ while (bus != NULL && bus->path_id <= pathid) { if (bus->path_id == pathid) pathid++; bus = TAILQ_NEXT(bus, links); } /* * Ensure that this pathid is not reserved for * a bus that may be registered in the future. */ if (resource_string_value("scbus", pathid, "at", &strval) == 0) { ++pathid; /* Start the search over */ goto retry; } return (pathid); } static path_id_t xptpathid(const char *sim_name, int sim_unit, int sim_bus) { path_id_t pathid; int i, dunit, val; char buf[32]; const char *dname; pathid = CAM_XPT_PATH_ID; snprintf(buf, sizeof(buf), "%s%d", sim_name, sim_unit); if (strcmp(buf, "xpt0") == 0 && sim_bus == 0) return (pathid); i = 0; while ((resource_find_match(&i, &dname, &dunit, "at", buf)) == 0) { if (strcmp(dname, "scbus")) { /* Avoid a bit of foot shooting. */ continue; } if (dunit < 0) /* unwired?! */ continue; if (resource_int_value("scbus", dunit, "bus", &val) == 0) { if (sim_bus == val) { pathid = dunit; break; } } else if (sim_bus == 0) { /* Unspecified matches bus 0 */ pathid = dunit; break; } else { printf("Ambiguous scbus configuration for %s%d " "bus %d, cannot wire down. The kernel " "config entry for scbus%d should " "specify a controller bus.\n" "Scbus will be assigned dynamically.\n", sim_name, sim_unit, sim_bus, dunit); break; } } if (pathid == CAM_XPT_PATH_ID) pathid = xptnextfreepathid(); return (pathid); } static const char * xpt_async_string(u_int32_t async_code) { switch (async_code) { case AC_BUS_RESET: return ("AC_BUS_RESET"); case AC_UNSOL_RESEL: return ("AC_UNSOL_RESEL"); case AC_SCSI_AEN: return ("AC_SCSI_AEN"); case AC_SENT_BDR: return ("AC_SENT_BDR"); case AC_PATH_REGISTERED: return ("AC_PATH_REGISTERED"); case AC_PATH_DEREGISTERED: return ("AC_PATH_DEREGISTERED"); case AC_FOUND_DEVICE: return ("AC_FOUND_DEVICE"); case AC_LOST_DEVICE: return ("AC_LOST_DEVICE"); case AC_TRANSFER_NEG: return ("AC_TRANSFER_NEG"); case AC_INQ_CHANGED: return ("AC_INQ_CHANGED"); case AC_GETDEV_CHANGED: return ("AC_GETDEV_CHANGED"); case AC_CONTRACT: return ("AC_CONTRACT"); case AC_ADVINFO_CHANGED: return ("AC_ADVINFO_CHANGED"); case AC_UNIT_ATTENTION: return ("AC_UNIT_ATTENTION"); } return ("AC_UNKNOWN"); } static int xpt_async_size(u_int32_t async_code) { switch (async_code) { case AC_BUS_RESET: return (0); case AC_UNSOL_RESEL: return (0); case AC_SCSI_AEN: return (0); case AC_SENT_BDR: return (0); case AC_PATH_REGISTERED: return (sizeof(struct ccb_pathinq)); case AC_PATH_DEREGISTERED: return (0); case AC_FOUND_DEVICE: return (sizeof(struct ccb_getdev)); case AC_LOST_DEVICE: return (0); case AC_TRANSFER_NEG: return (sizeof(struct ccb_trans_settings)); case AC_INQ_CHANGED: return (0); case AC_GETDEV_CHANGED: return (0); case AC_CONTRACT: return (sizeof(struct ac_contract)); case AC_ADVINFO_CHANGED: return (-1); case AC_UNIT_ATTENTION: return (sizeof(struct ccb_scsiio)); } return (0); } static int xpt_async_process_dev(struct cam_ed *device, void *arg) { union ccb *ccb = arg; struct cam_path *path = ccb->ccb_h.path; void *async_arg = ccb->casync.async_arg_ptr; u_int32_t async_code = ccb->casync.async_code; int relock; if (path->device != device && path->device->lun_id != CAM_LUN_WILDCARD && device->lun_id != CAM_LUN_WILDCARD) return (1); /* * The async callback could free the device. * If it is a broadcast async, it doesn't hold * device reference, so take our own reference. */ xpt_acquire_device(device); /* * If async for specific device is to be delivered to * the wildcard client, take the specific device lock. * XXX: We may need a way for client to specify it. */ if ((device->lun_id == CAM_LUN_WILDCARD && path->device->lun_id != CAM_LUN_WILDCARD) || (device->target->target_id == CAM_TARGET_WILDCARD && path->target->target_id != CAM_TARGET_WILDCARD) || (device->target->bus->path_id == CAM_BUS_WILDCARD && path->target->bus->path_id != CAM_BUS_WILDCARD)) { mtx_unlock(&device->device_mtx); xpt_path_lock(path); relock = 1; } else relock = 0; (*(device->target->bus->xport->ops->async))(async_code, device->target->bus, device->target, device, async_arg); xpt_async_bcast(&device->asyncs, async_code, path, async_arg); if (relock) { xpt_path_unlock(path); mtx_lock(&device->device_mtx); } xpt_release_device(device); return (1); } static int xpt_async_process_tgt(struct cam_et *target, void *arg) { union ccb *ccb = arg; struct cam_path *path = ccb->ccb_h.path; if (path->target != target && path->target->target_id != CAM_TARGET_WILDCARD && target->target_id != CAM_TARGET_WILDCARD) return (1); if (ccb->casync.async_code == AC_SENT_BDR) { /* Update our notion of when the last reset occurred */ microtime(&target->last_reset); } return (xptdevicetraverse(target, NULL, xpt_async_process_dev, ccb)); } static void xpt_async_process(struct cam_periph *periph, union ccb *ccb) { struct cam_eb *bus; struct cam_path *path; void *async_arg; u_int32_t async_code; path = ccb->ccb_h.path; async_code = ccb->casync.async_code; async_arg = ccb->casync.async_arg_ptr; CAM_DEBUG(path, CAM_DEBUG_TRACE | CAM_DEBUG_INFO, ("xpt_async(%s)\n", xpt_async_string(async_code))); bus = path->bus; if (async_code == AC_BUS_RESET) { /* Update our notion of when the last reset occurred */ microtime(&bus->last_reset); } xpttargettraverse(bus, NULL, xpt_async_process_tgt, ccb); /* * If this wasn't a fully wildcarded async, tell all * clients that want all async events. */ if (bus != xpt_periph->path->bus) { xpt_path_lock(xpt_periph->path); xpt_async_process_dev(xpt_periph->path->device, ccb); xpt_path_unlock(xpt_periph->path); } if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD) xpt_release_devq(path, 1, TRUE); else xpt_release_simq(path->bus->sim, TRUE); if (ccb->casync.async_arg_size > 0) free(async_arg, M_CAMXPT); xpt_free_path(path); xpt_free_ccb(ccb); } static void xpt_async_bcast(struct async_list *async_head, u_int32_t async_code, struct cam_path *path, void *async_arg) { struct async_node *cur_entry; struct mtx *mtx; cur_entry = SLIST_FIRST(async_head); while (cur_entry != NULL) { struct async_node *next_entry; /* * Grab the next list entry before we call the current * entry's callback. This is because the callback function * can delete its async callback entry. */ next_entry = SLIST_NEXT(cur_entry, links); if ((cur_entry->event_enable & async_code) != 0) { mtx = cur_entry->event_lock ? path->device->sim->mtx : NULL; if (mtx) mtx_lock(mtx); cur_entry->callback(cur_entry->callback_arg, async_code, path, async_arg); if (mtx) mtx_unlock(mtx); } cur_entry = next_entry; } } void xpt_async(u_int32_t async_code, struct cam_path *path, void *async_arg) { union ccb *ccb; int size; ccb = xpt_alloc_ccb_nowait(); if (ccb == NULL) { xpt_print(path, "Can't allocate CCB to send %s\n", xpt_async_string(async_code)); return; } if (xpt_clone_path(&ccb->ccb_h.path, path) != CAM_REQ_CMP) { xpt_print(path, "Can't allocate path to send %s\n", xpt_async_string(async_code)); xpt_free_ccb(ccb); return; } ccb->ccb_h.path->periph = NULL; ccb->ccb_h.func_code = XPT_ASYNC; ccb->ccb_h.cbfcnp = xpt_async_process; ccb->ccb_h.flags |= CAM_UNLOCKED; ccb->casync.async_code = async_code; ccb->casync.async_arg_size = 0; size = xpt_async_size(async_code); CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_async: func %#x %s aync_code %d %s\n", ccb->ccb_h.func_code, xpt_action_name(ccb->ccb_h.func_code), async_code, xpt_async_string(async_code))); if (size > 0 && async_arg != NULL) { ccb->casync.async_arg_ptr = malloc(size, M_CAMXPT, M_NOWAIT); if (ccb->casync.async_arg_ptr == NULL) { xpt_print(path, "Can't allocate argument to send %s\n", xpt_async_string(async_code)); xpt_free_path(ccb->ccb_h.path); xpt_free_ccb(ccb); return; } memcpy(ccb->casync.async_arg_ptr, async_arg, size); ccb->casync.async_arg_size = size; } else if (size < 0) { ccb->casync.async_arg_ptr = async_arg; ccb->casync.async_arg_size = size; } if (path->device != NULL && path->device->lun_id != CAM_LUN_WILDCARD) xpt_freeze_devq(path, 1); else xpt_freeze_simq(path->bus->sim, 1); xpt_action(ccb); } static void xpt_dev_async_default(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg) { /* * We only need to handle events for real devices. */ if (target->target_id == CAM_TARGET_WILDCARD || device->lun_id == CAM_LUN_WILDCARD) return; printf("%s called\n", __func__); } static uint32_t xpt_freeze_devq_device(struct cam_ed *dev, u_int count) { struct cam_devq *devq; uint32_t freeze; devq = dev->sim->devq; mtx_assert(&devq->send_mtx, MA_OWNED); CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_freeze_devq_device(%d) %u->%u\n", count, dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt + count)); freeze = (dev->ccbq.queue.qfrozen_cnt += count); /* Remove frozen device from sendq. */ if (device_is_queued(dev)) camq_remove(&devq->send_queue, dev->devq_entry.index); return (freeze); } u_int32_t xpt_freeze_devq(struct cam_path *path, u_int count) { struct cam_ed *dev = path->device; struct cam_devq *devq; uint32_t freeze; devq = dev->sim->devq; mtx_lock(&devq->send_mtx); CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_freeze_devq(%d)\n", count)); freeze = xpt_freeze_devq_device(dev, count); mtx_unlock(&devq->send_mtx); return (freeze); } u_int32_t xpt_freeze_simq(struct cam_sim *sim, u_int count) { struct cam_devq *devq; uint32_t freeze; devq = sim->devq; mtx_lock(&devq->send_mtx); freeze = (devq->send_queue.qfrozen_cnt += count); mtx_unlock(&devq->send_mtx); return (freeze); } static void xpt_release_devq_timeout(void *arg) { struct cam_ed *dev; struct cam_devq *devq; dev = (struct cam_ed *)arg; CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_timeout\n")); devq = dev->sim->devq; mtx_assert(&devq->send_mtx, MA_OWNED); if (xpt_release_devq_device(dev, /*count*/1, /*run_queue*/TRUE)) xpt_run_devq(devq); } void xpt_release_devq(struct cam_path *path, u_int count, int run_queue) { struct cam_ed *dev; struct cam_devq *devq; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("xpt_release_devq(%d, %d)\n", count, run_queue)); dev = path->device; devq = dev->sim->devq; mtx_lock(&devq->send_mtx); if (xpt_release_devq_device(dev, count, run_queue)) xpt_run_devq(dev->sim->devq); mtx_unlock(&devq->send_mtx); } static int xpt_release_devq_device(struct cam_ed *dev, u_int count, int run_queue) { mtx_assert(&dev->sim->devq->send_mtx, MA_OWNED); CAM_DEBUG_DEV(dev, CAM_DEBUG_TRACE, ("xpt_release_devq_device(%d, %d) %u->%u\n", count, run_queue, dev->ccbq.queue.qfrozen_cnt, dev->ccbq.queue.qfrozen_cnt - count)); if (count > dev->ccbq.queue.qfrozen_cnt) { #ifdef INVARIANTS printf("xpt_release_devq(): requested %u > present %u\n", count, dev->ccbq.queue.qfrozen_cnt); #endif count = dev->ccbq.queue.qfrozen_cnt; } dev->ccbq.queue.qfrozen_cnt -= count; if (dev->ccbq.queue.qfrozen_cnt == 0) { /* * No longer need to wait for a successful * command completion. */ dev->flags &= ~CAM_DEV_REL_ON_COMPLETE; /* * Remove any timeouts that might be scheduled * to release this queue. */ if ((dev->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) { callout_stop(&dev->callout); dev->flags &= ~CAM_DEV_REL_TIMEOUT_PENDING; } /* * Now that we are unfrozen schedule the * device so any pending transactions are * run. */ xpt_schedule_devq(dev->sim->devq, dev); } else run_queue = 0; return (run_queue); } void xpt_release_simq(struct cam_sim *sim, int run_queue) { struct cam_devq *devq; devq = sim->devq; mtx_lock(&devq->send_mtx); if (devq->send_queue.qfrozen_cnt <= 0) { #ifdef INVARIANTS printf("xpt_release_simq: requested 1 > present %u\n", devq->send_queue.qfrozen_cnt); #endif } else devq->send_queue.qfrozen_cnt--; if (devq->send_queue.qfrozen_cnt == 0) { /* * If there is a timeout scheduled to release this * sim queue, remove it. The queue frozen count is * already at 0. */ if ((sim->flags & CAM_SIM_REL_TIMEOUT_PENDING) != 0){ callout_stop(&sim->callout); sim->flags &= ~CAM_SIM_REL_TIMEOUT_PENDING; } if (run_queue) { /* * Now that we are unfrozen run the send queue. */ xpt_run_devq(sim->devq); } } mtx_unlock(&devq->send_mtx); } void xpt_done(union ccb *done_ccb) { struct cam_doneq *queue; int run, hash; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) if (done_ccb->ccb_h.func_code == XPT_SCSI_IO && done_ccb->csio.bio != NULL) biotrack(done_ccb->csio.bio, __func__); #endif CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done: func= %#x %s status %#x\n", done_ccb->ccb_h.func_code, xpt_action_name(done_ccb->ccb_h.func_code), done_ccb->ccb_h.status)); if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0) return; /* Store the time the ccb was in the sim */ done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data); hash = (u_int)(done_ccb->ccb_h.path_id + done_ccb->ccb_h.target_id + done_ccb->ccb_h.target_lun) % cam_num_doneqs; queue = &cam_doneqs[hash]; mtx_lock(&queue->cam_doneq_mtx); run = (queue->cam_doneq_sleep && STAILQ_EMPTY(&queue->cam_doneq)); STAILQ_INSERT_TAIL(&queue->cam_doneq, &done_ccb->ccb_h, sim_links.stqe); done_ccb->ccb_h.pinfo.index = CAM_DONEQ_INDEX; mtx_unlock(&queue->cam_doneq_mtx); if (run) wakeup(&queue->cam_doneq); } void xpt_done_direct(union ccb *done_ccb) { CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xpt_done_direct: status %#x\n", done_ccb->ccb_h.status)); if ((done_ccb->ccb_h.func_code & XPT_FC_QUEUED) == 0) return; /* Store the time the ccb was in the sim */ done_ccb->ccb_h.qos.periph_data = cam_iosched_delta_t(done_ccb->ccb_h.qos.periph_data); xpt_done_process(&done_ccb->ccb_h); } union ccb * xpt_alloc_ccb(void) { union ccb *new_ccb; new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK); return (new_ccb); } union ccb * xpt_alloc_ccb_nowait(void) { union ccb *new_ccb; new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT); return (new_ccb); } void xpt_free_ccb(union ccb *free_ccb) { - free(free_ccb, M_CAMCCB); + struct cam_periph *periph; + + if (free_ccb->ccb_h.alloc_flags & CAM_CCB_FROM_UMA) { + /* + * Looks like a CCB allocated from a periph UMA zone. + */ + periph = free_ccb->ccb_h.path->periph; + uma_zfree(periph->ccb_zone, free_ccb); + } else { + free(free_ccb, M_CAMCCB); + } } /* Private XPT functions */ /* * Get a CAM control block for the caller. Charge the structure to the device * referenced by the path. If we don't have sufficient resources to allocate * more ccbs, we return NULL. */ static union ccb * xpt_get_ccb_nowait(struct cam_periph *periph) { union ccb *new_ccb; + int alloc_flags; - new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT); + if (periph->ccb_zone != NULL) { + alloc_flags = CAM_CCB_FROM_UMA; + new_ccb = uma_zalloc(periph->ccb_zone, M_ZERO|M_NOWAIT); + } else { + alloc_flags = 0; + new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_NOWAIT); + } if (new_ccb == NULL) return (NULL); + new_ccb->ccb_h.alloc_flags = alloc_flags; periph->periph_allocated++; cam_ccbq_take_opening(&periph->path->device->ccbq); return (new_ccb); } static union ccb * xpt_get_ccb(struct cam_periph *periph) { union ccb *new_ccb; + int alloc_flags; cam_periph_unlock(periph); - new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK); + if (periph->ccb_zone != NULL) { + alloc_flags = CAM_CCB_FROM_UMA; + new_ccb = uma_zalloc(periph->ccb_zone, M_ZERO|M_WAITOK); + } else { + alloc_flags = 0; + new_ccb = malloc(sizeof(*new_ccb), M_CAMCCB, M_ZERO|M_WAITOK); + } + new_ccb->ccb_h.alloc_flags = alloc_flags; cam_periph_lock(periph); periph->periph_allocated++; cam_ccbq_take_opening(&periph->path->device->ccbq); return (new_ccb); } union ccb * cam_periph_getccb(struct cam_periph *periph, u_int32_t priority) { struct ccb_hdr *ccb_h; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("cam_periph_getccb\n")); cam_periph_assert(periph, MA_OWNED); while ((ccb_h = SLIST_FIRST(&periph->ccb_list)) == NULL || ccb_h->pinfo.priority != priority) { if (priority < periph->immediate_priority) { periph->immediate_priority = priority; xpt_run_allocq(periph, 0); } else cam_periph_sleep(periph, &periph->ccb_list, PRIBIO, "cgticb", 0); } SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle); return ((union ccb *)ccb_h); } static void xpt_acquire_bus(struct cam_eb *bus) { xpt_lock_buses(); bus->refcount++; xpt_unlock_buses(); } static void xpt_release_bus(struct cam_eb *bus) { xpt_lock_buses(); KASSERT(bus->refcount >= 1, ("bus->refcount >= 1")); if (--bus->refcount > 0) { xpt_unlock_buses(); return; } TAILQ_REMOVE(&xsoftc.xpt_busses, bus, links); xsoftc.bus_generation++; xpt_unlock_buses(); KASSERT(TAILQ_EMPTY(&bus->et_entries), ("destroying bus, but target list is not empty")); cam_sim_release(bus->sim); mtx_destroy(&bus->eb_mtx); free(bus, M_CAMXPT); } static struct cam_et * xpt_alloc_target(struct cam_eb *bus, target_id_t target_id) { struct cam_et *cur_target, *target; mtx_assert(&xsoftc.xpt_topo_lock, MA_OWNED); mtx_assert(&bus->eb_mtx, MA_OWNED); target = (struct cam_et *)malloc(sizeof(*target), M_CAMXPT, M_NOWAIT|M_ZERO); if (target == NULL) return (NULL); TAILQ_INIT(&target->ed_entries); target->bus = bus; target->target_id = target_id; target->refcount = 1; target->generation = 0; target->luns = NULL; mtx_init(&target->luns_mtx, "CAM LUNs lock", NULL, MTX_DEF); timevalclear(&target->last_reset); /* * Hold a reference to our parent bus so it * will not go away before we do. */ bus->refcount++; /* Insertion sort into our bus's target list */ cur_target = TAILQ_FIRST(&bus->et_entries); while (cur_target != NULL && cur_target->target_id < target_id) cur_target = TAILQ_NEXT(cur_target, links); if (cur_target != NULL) { TAILQ_INSERT_BEFORE(cur_target, target, links); } else { TAILQ_INSERT_TAIL(&bus->et_entries, target, links); } bus->generation++; return (target); } static void xpt_acquire_target(struct cam_et *target) { struct cam_eb *bus = target->bus; mtx_lock(&bus->eb_mtx); target->refcount++; mtx_unlock(&bus->eb_mtx); } static void xpt_release_target(struct cam_et *target) { struct cam_eb *bus = target->bus; mtx_lock(&bus->eb_mtx); if (--target->refcount > 0) { mtx_unlock(&bus->eb_mtx); return; } TAILQ_REMOVE(&bus->et_entries, target, links); bus->generation++; mtx_unlock(&bus->eb_mtx); KASSERT(TAILQ_EMPTY(&target->ed_entries), ("destroying target, but device list is not empty")); xpt_release_bus(bus); mtx_destroy(&target->luns_mtx); if (target->luns) free(target->luns, M_CAMXPT); free(target, M_CAMXPT); } static struct cam_ed * xpt_alloc_device_default(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; device = xpt_alloc_device(bus, target, lun_id); if (device == NULL) return (NULL); device->mintags = 1; device->maxtags = 1; return (device); } static void xpt_destroy_device(void *context, int pending) { struct cam_ed *device = context; mtx_lock(&device->device_mtx); mtx_destroy(&device->device_mtx); free(device, M_CAMDEV); } struct cam_ed * xpt_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct cam_ed *cur_device, *device; struct cam_devq *devq; cam_status status; mtx_assert(&bus->eb_mtx, MA_OWNED); /* Make space for us in the device queue on our bus */ devq = bus->sim->devq; mtx_lock(&devq->send_mtx); status = cam_devq_resize(devq, devq->send_queue.array_size + 1); mtx_unlock(&devq->send_mtx); if (status != CAM_REQ_CMP) return (NULL); device = (struct cam_ed *)malloc(sizeof(*device), M_CAMDEV, M_NOWAIT|M_ZERO); if (device == NULL) return (NULL); cam_init_pinfo(&device->devq_entry); device->target = target; device->lun_id = lun_id; device->sim = bus->sim; if (cam_ccbq_init(&device->ccbq, bus->sim->max_dev_openings) != 0) { free(device, M_CAMDEV); return (NULL); } SLIST_INIT(&device->asyncs); SLIST_INIT(&device->periphs); device->generation = 0; device->flags = CAM_DEV_UNCONFIGURED; device->tag_delay_count = 0; device->tag_saved_openings = 0; device->refcount = 1; mtx_init(&device->device_mtx, "CAM device lock", NULL, MTX_DEF); callout_init_mtx(&device->callout, &devq->send_mtx, 0); TASK_INIT(&device->device_destroy_task, 0, xpt_destroy_device, device); /* * Hold a reference to our parent bus so it * will not go away before we do. */ target->refcount++; cur_device = TAILQ_FIRST(&target->ed_entries); while (cur_device != NULL && cur_device->lun_id < lun_id) cur_device = TAILQ_NEXT(cur_device, links); if (cur_device != NULL) TAILQ_INSERT_BEFORE(cur_device, device, links); else TAILQ_INSERT_TAIL(&target->ed_entries, device, links); target->generation++; return (device); } void xpt_acquire_device(struct cam_ed *device) { struct cam_eb *bus = device->target->bus; mtx_lock(&bus->eb_mtx); device->refcount++; mtx_unlock(&bus->eb_mtx); } void xpt_release_device(struct cam_ed *device) { struct cam_eb *bus = device->target->bus; struct cam_devq *devq; mtx_lock(&bus->eb_mtx); if (--device->refcount > 0) { mtx_unlock(&bus->eb_mtx); return; } TAILQ_REMOVE(&device->target->ed_entries, device,links); device->target->generation++; mtx_unlock(&bus->eb_mtx); /* Release our slot in the devq */ devq = bus->sim->devq; mtx_lock(&devq->send_mtx); cam_devq_resize(devq, devq->send_queue.array_size - 1); KASSERT(SLIST_EMPTY(&device->periphs), ("destroying device, but periphs list is not empty")); KASSERT(device->devq_entry.index == CAM_UNQUEUED_INDEX, ("destroying device while still queued for ccbs")); /* The send_mtx must be held when accessing the callout */ if ((device->flags & CAM_DEV_REL_TIMEOUT_PENDING) != 0) callout_stop(&device->callout); mtx_unlock(&devq->send_mtx); xpt_release_target(device->target); cam_ccbq_fini(&device->ccbq); /* * Free allocated memory. free(9) does nothing if the * supplied pointer is NULL, so it is safe to call without * checking. */ free(device->supported_vpds, M_CAMXPT); free(device->device_id, M_CAMXPT); free(device->ext_inq, M_CAMXPT); free(device->physpath, M_CAMXPT); free(device->rcap_buf, M_CAMXPT); free(device->serial_num, M_CAMXPT); free(device->nvme_data, M_CAMXPT); free(device->nvme_cdata, M_CAMXPT); taskqueue_enqueue(xsoftc.xpt_taskq, &device->device_destroy_task); } u_int32_t xpt_dev_ccbq_resize(struct cam_path *path, int newopenings) { int result; struct cam_ed *dev; dev = path->device; mtx_lock(&dev->sim->devq->send_mtx); result = cam_ccbq_resize(&dev->ccbq, newopenings); mtx_unlock(&dev->sim->devq->send_mtx); if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (dev->inq_flags & SID_CmdQue) != 0) dev->tag_saved_openings = newopenings; return (result); } static struct cam_eb * xpt_find_bus(path_id_t path_id) { struct cam_eb *bus; xpt_lock_buses(); for (bus = TAILQ_FIRST(&xsoftc.xpt_busses); bus != NULL; bus = TAILQ_NEXT(bus, links)) { if (bus->path_id == path_id) { bus->refcount++; break; } } xpt_unlock_buses(); return (bus); } static struct cam_et * xpt_find_target(struct cam_eb *bus, target_id_t target_id) { struct cam_et *target; mtx_assert(&bus->eb_mtx, MA_OWNED); for (target = TAILQ_FIRST(&bus->et_entries); target != NULL; target = TAILQ_NEXT(target, links)) { if (target->target_id == target_id) { target->refcount++; break; } } return (target); } static struct cam_ed * xpt_find_device(struct cam_et *target, lun_id_t lun_id) { struct cam_ed *device; mtx_assert(&target->bus->eb_mtx, MA_OWNED); for (device = TAILQ_FIRST(&target->ed_entries); device != NULL; device = TAILQ_NEXT(device, links)) { if (device->lun_id == lun_id) { device->refcount++; break; } } return (device); } void xpt_start_tags(struct cam_path *path) { struct ccb_relsim crs; struct cam_ed *device; struct cam_sim *sim; int newopenings; device = path->device; sim = path->bus->sim; device->flags &= ~CAM_DEV_TAG_AFTER_COUNT; xpt_freeze_devq(path, /*count*/1); device->inq_flags |= SID_CmdQue; if (device->tag_saved_openings != 0) newopenings = device->tag_saved_openings; else newopenings = min(device->maxtags, sim->max_tagged_dev_openings); xpt_dev_ccbq_resize(path, newopenings); xpt_async(AC_GETDEV_CHANGED, path, NULL); memset(&crs, 0, sizeof(crs)); xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY; crs.openings = crs.release_timeout = crs.qfrozen_cnt = 0; xpt_action((union ccb *)&crs); } void xpt_stop_tags(struct cam_path *path) { struct ccb_relsim crs; struct cam_ed *device; struct cam_sim *sim; device = path->device; sim = path->bus->sim; device->flags &= ~CAM_DEV_TAG_AFTER_COUNT; device->tag_delay_count = 0; xpt_freeze_devq(path, /*count*/1); device->inq_flags &= ~SID_CmdQue; xpt_dev_ccbq_resize(path, sim->max_dev_openings); xpt_async(AC_GETDEV_CHANGED, path, NULL); memset(&crs, 0, sizeof(crs)); xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL); crs.ccb_h.func_code = XPT_REL_SIMQ; crs.release_flags = RELSIM_RELEASE_AFTER_QEMPTY; crs.openings = crs.release_timeout = crs.qfrozen_cnt = 0; xpt_action((union ccb *)&crs); } /* * Assume all possible buses are detected by this time, so allow boot * as soon as they all are scanned. */ static void xpt_boot_delay(void *arg) { xpt_release_boot(); } /* * Now that all config hooks have completed, start boot_delay timer, * waiting for possibly still undetected buses (USB) to appear. */ static void xpt_ch_done(void *arg) { callout_init(&xsoftc.boot_callout, 1); callout_reset_sbt(&xsoftc.boot_callout, SBT_1MS * xsoftc.boot_delay, 0, xpt_boot_delay, NULL, 0); } SYSINIT(xpt_hw_delay, SI_SUB_INT_CONFIG_HOOKS, SI_ORDER_ANY, xpt_ch_done, NULL); /* * Now that interrupts are enabled, go find our devices */ static void xpt_config(void *arg) { if (taskqueue_start_threads(&xsoftc.xpt_taskq, 1, PRIBIO, "CAM taskq")) printf("xpt_config: failed to create taskqueue thread.\n"); /* Setup debugging path */ if (cam_dflags != CAM_DEBUG_NONE) { if (xpt_create_path(&cam_dpath, NULL, CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN) != CAM_REQ_CMP) { printf("xpt_config: xpt_create_path() failed for debug" " target %d:%d:%d, debugging disabled\n", CAM_DEBUG_BUS, CAM_DEBUG_TARGET, CAM_DEBUG_LUN); cam_dflags = CAM_DEBUG_NONE; } } else cam_dpath = NULL; periphdriver_init(1); xpt_hold_boot(); /* Fire up rescan thread. */ if (kproc_kthread_add(xpt_scanner_thread, NULL, &cam_proc, NULL, 0, 0, "cam", "scanner")) { printf("xpt_config: failed to create rescan thread.\n"); } } void xpt_hold_boot_locked(void) { if (xsoftc.buses_to_config++ == 0) root_mount_hold_token("CAM", &xsoftc.xpt_rootmount); } void xpt_hold_boot(void) { xpt_lock_buses(); xpt_hold_boot_locked(); xpt_unlock_buses(); } void xpt_release_boot(void) { xpt_lock_buses(); if (--xsoftc.buses_to_config == 0) { if (xsoftc.buses_config_done == 0) { xsoftc.buses_config_done = 1; xsoftc.buses_to_config++; TASK_INIT(&xsoftc.boot_task, 0, xpt_finishconfig_task, NULL); taskqueue_enqueue(taskqueue_thread, &xsoftc.boot_task); } else root_mount_rel(&xsoftc.xpt_rootmount); } xpt_unlock_buses(); } /* * If the given device only has one peripheral attached to it, and if that * peripheral is the passthrough driver, announce it. This insures that the * user sees some sort of announcement for every peripheral in their system. */ static int xptpassannouncefunc(struct cam_ed *device, void *arg) { struct cam_periph *periph; int i; for (periph = SLIST_FIRST(&device->periphs), i = 0; periph != NULL; periph = SLIST_NEXT(periph, periph_links), i++); periph = SLIST_FIRST(&device->periphs); if ((i == 1) && (strncmp(periph->periph_name, "pass", 4) == 0)) xpt_announce_periph(periph, NULL); return(1); } static void xpt_finishconfig_task(void *context, int pending) { periphdriver_init(2); /* * Check for devices with no "standard" peripheral driver * attached. For any devices like that, announce the * passthrough driver so the user will see something. */ if (!bootverbose) xpt_for_all_devices(xptpassannouncefunc, NULL); xpt_release_boot(); } cam_status xpt_register_async(int event, ac_callback_t *cbfunc, void *cbarg, struct cam_path *path) { struct ccb_setasync csa; cam_status status; int xptpath = 0; if (path == NULL) { status = xpt_create_path(&path, /*periph*/NULL, CAM_XPT_PATH_ID, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); if (status != CAM_REQ_CMP) return (status); xpt_path_lock(path); xptpath = 1; } memset(&csa, 0, sizeof(csa)); xpt_setup_ccb(&csa.ccb_h, path, CAM_PRIORITY_NORMAL); csa.ccb_h.func_code = XPT_SASYNC_CB; csa.event_enable = event; csa.callback = cbfunc; csa.callback_arg = cbarg; xpt_action((union ccb *)&csa); status = csa.ccb_h.status; CAM_DEBUG(csa.ccb_h.path, CAM_DEBUG_TRACE, ("xpt_register_async: func %p\n", cbfunc)); if (xptpath) { xpt_path_unlock(path); xpt_free_path(path); } if ((status == CAM_REQ_CMP) && (csa.event_enable & AC_FOUND_DEVICE)) { /* * Get this peripheral up to date with all * the currently existing devices. */ xpt_for_all_devices(xptsetasyncfunc, &csa); } if ((status == CAM_REQ_CMP) && (csa.event_enable & AC_PATH_REGISTERED)) { /* * Get this peripheral up to date with all * the currently existing buses. */ xpt_for_all_busses(xptsetasyncbusfunc, &csa); } return (status); } static void xptaction(struct cam_sim *sim, union ccb *work_ccb) { CAM_DEBUG(work_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("xptaction\n")); switch (work_ccb->ccb_h.func_code) { /* Common cases first */ case XPT_PATH_INQ: /* Path routing inquiry */ { struct ccb_pathinq *cpi; cpi = &work_ccb->cpi; cpi->version_num = 1; /* XXX??? */ cpi->hba_inquiry = 0; cpi->target_sprt = 0; cpi->hba_misc = 0; cpi->hba_eng_cnt = 0; cpi->max_target = 0; cpi->max_lun = 0; cpi->initiator_id = 0; strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strlcpy(cpi->hba_vid, "", HBA_IDLEN); strlcpy(cpi->dev_name, sim->sim_name, DEV_IDLEN); cpi->unit_number = sim->unit_number; cpi->bus_id = sim->bus_id; cpi->base_transfer_speed = 0; cpi->protocol = PROTO_UNSPECIFIED; cpi->protocol_version = PROTO_VERSION_UNSPECIFIED; cpi->transport = XPORT_UNSPECIFIED; cpi->transport_version = XPORT_VERSION_UNSPECIFIED; cpi->ccb_h.status = CAM_REQ_CMP; break; } default: work_ccb->ccb_h.status = CAM_REQ_INVALID; break; } xpt_done(work_ccb); } /* * The xpt as a "controller" has no interrupt sources, so polling * is a no-op. */ static void xptpoll(struct cam_sim *sim) { } void xpt_lock_buses(void) { mtx_lock(&xsoftc.xpt_topo_lock); } void xpt_unlock_buses(void) { mtx_unlock(&xsoftc.xpt_topo_lock); } struct mtx * xpt_path_mtx(struct cam_path *path) { return (&path->device->device_mtx); } static void xpt_done_process(struct ccb_hdr *ccb_h) { struct cam_sim *sim = NULL; struct cam_devq *devq = NULL; struct mtx *mtx = NULL; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) struct ccb_scsiio *csio; if (ccb_h->func_code == XPT_SCSI_IO) { csio = &((union ccb *)ccb_h)->csio; if (csio->bio != NULL) biotrack(csio->bio, __func__); } #endif if (ccb_h->flags & CAM_HIGH_POWER) { struct highpowerlist *hphead; struct cam_ed *device; mtx_lock(&xsoftc.xpt_highpower_lock); hphead = &xsoftc.highpowerq; device = STAILQ_FIRST(hphead); /* * Increment the count since this command is done. */ xsoftc.num_highpower++; /* * Any high powered commands queued up? */ if (device != NULL) { STAILQ_REMOVE_HEAD(hphead, highpowerq_entry); mtx_unlock(&xsoftc.xpt_highpower_lock); mtx_lock(&device->sim->devq->send_mtx); xpt_release_devq_device(device, /*count*/1, /*runqueue*/TRUE); mtx_unlock(&device->sim->devq->send_mtx); } else mtx_unlock(&xsoftc.xpt_highpower_lock); } /* * Insulate against a race where the periph is destroyed but CCBs are * still not all processed. This shouldn't happen, but allows us better * bug diagnostic when it does. */ if (ccb_h->path->bus) sim = ccb_h->path->bus->sim; if (ccb_h->status & CAM_RELEASE_SIMQ) { KASSERT(sim, ("sim missing for CAM_RELEASE_SIMQ request")); xpt_release_simq(sim, /*run_queue*/FALSE); ccb_h->status &= ~CAM_RELEASE_SIMQ; } if ((ccb_h->flags & CAM_DEV_QFRZDIS) && (ccb_h->status & CAM_DEV_QFRZN)) { xpt_release_devq(ccb_h->path, /*count*/1, /*run_queue*/TRUE); ccb_h->status &= ~CAM_DEV_QFRZN; } if ((ccb_h->func_code & XPT_FC_USER_CCB) == 0) { struct cam_ed *dev = ccb_h->path->device; if (sim) devq = sim->devq; KASSERT(devq, ("Periph disappeared with CCB %p %s request pending.", ccb_h, xpt_action_name(ccb_h->func_code))); mtx_lock(&devq->send_mtx); devq->send_active--; devq->send_openings++; cam_ccbq_ccb_done(&dev->ccbq, (union ccb *)ccb_h); if (((dev->flags & CAM_DEV_REL_ON_QUEUE_EMPTY) != 0 && (dev->ccbq.dev_active == 0))) { dev->flags &= ~CAM_DEV_REL_ON_QUEUE_EMPTY; xpt_release_devq_device(dev, /*count*/1, /*run_queue*/FALSE); } if (((dev->flags & CAM_DEV_REL_ON_COMPLETE) != 0 && (ccb_h->status&CAM_STATUS_MASK) != CAM_REQUEUE_REQ)) { dev->flags &= ~CAM_DEV_REL_ON_COMPLETE; xpt_release_devq_device(dev, /*count*/1, /*run_queue*/FALSE); } if (!device_is_queued(dev)) (void)xpt_schedule_devq(devq, dev); xpt_run_devq(devq); mtx_unlock(&devq->send_mtx); if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0) { mtx = xpt_path_mtx(ccb_h->path); mtx_lock(mtx); if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 && (--dev->tag_delay_count == 0)) xpt_start_tags(ccb_h->path); } } if ((ccb_h->flags & CAM_UNLOCKED) == 0) { if (mtx == NULL) { mtx = xpt_path_mtx(ccb_h->path); mtx_lock(mtx); } } else { if (mtx != NULL) { mtx_unlock(mtx); mtx = NULL; } } /* Call the peripheral driver's callback */ ccb_h->pinfo.index = CAM_UNQUEUED_INDEX; (*ccb_h->cbfcnp)(ccb_h->path->periph, (union ccb *)ccb_h); if (mtx != NULL) mtx_unlock(mtx); } /* * Parameterize instead and use xpt_done_td? */ static void xpt_async_td(void *arg) { struct cam_doneq *queue = arg; struct ccb_hdr *ccb_h; STAILQ_HEAD(, ccb_hdr) doneq; STAILQ_INIT(&doneq); mtx_lock(&queue->cam_doneq_mtx); while (1) { while (STAILQ_EMPTY(&queue->cam_doneq)) msleep(&queue->cam_doneq, &queue->cam_doneq_mtx, PRIBIO, "-", 0); STAILQ_CONCAT(&doneq, &queue->cam_doneq); mtx_unlock(&queue->cam_doneq_mtx); while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) { STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe); xpt_done_process(ccb_h); } mtx_lock(&queue->cam_doneq_mtx); } } void xpt_done_td(void *arg) { struct cam_doneq *queue = arg; struct ccb_hdr *ccb_h; STAILQ_HEAD(, ccb_hdr) doneq; STAILQ_INIT(&doneq); mtx_lock(&queue->cam_doneq_mtx); while (1) { while (STAILQ_EMPTY(&queue->cam_doneq)) { queue->cam_doneq_sleep = 1; msleep(&queue->cam_doneq, &queue->cam_doneq_mtx, PRIBIO, "-", 0); queue->cam_doneq_sleep = 0; } STAILQ_CONCAT(&doneq, &queue->cam_doneq); mtx_unlock(&queue->cam_doneq_mtx); THREAD_NO_SLEEPING(); while ((ccb_h = STAILQ_FIRST(&doneq)) != NULL) { STAILQ_REMOVE_HEAD(&doneq, sim_links.stqe); xpt_done_process(ccb_h); } THREAD_SLEEPING_OK(); mtx_lock(&queue->cam_doneq_mtx); } } static void camisr_runqueue(void) { struct ccb_hdr *ccb_h; struct cam_doneq *queue; int i; /* Process global queues. */ for (i = 0; i < cam_num_doneqs; i++) { queue = &cam_doneqs[i]; mtx_lock(&queue->cam_doneq_mtx); while ((ccb_h = STAILQ_FIRST(&queue->cam_doneq)) != NULL) { STAILQ_REMOVE_HEAD(&queue->cam_doneq, sim_links.stqe); mtx_unlock(&queue->cam_doneq_mtx); xpt_done_process(ccb_h); mtx_lock(&queue->cam_doneq_mtx); } mtx_unlock(&queue->cam_doneq_mtx); } } struct kv { uint32_t v; const char *name; }; static struct kv map[] = { { XPT_NOOP, "XPT_NOOP" }, { XPT_SCSI_IO, "XPT_SCSI_IO" }, { XPT_GDEV_TYPE, "XPT_GDEV_TYPE" }, { XPT_GDEVLIST, "XPT_GDEVLIST" }, { XPT_PATH_INQ, "XPT_PATH_INQ" }, { XPT_REL_SIMQ, "XPT_REL_SIMQ" }, { XPT_SASYNC_CB, "XPT_SASYNC_CB" }, { XPT_SDEV_TYPE, "XPT_SDEV_TYPE" }, { XPT_SCAN_BUS, "XPT_SCAN_BUS" }, { XPT_DEV_MATCH, "XPT_DEV_MATCH" }, { XPT_DEBUG, "XPT_DEBUG" }, { XPT_PATH_STATS, "XPT_PATH_STATS" }, { XPT_GDEV_STATS, "XPT_GDEV_STATS" }, { XPT_DEV_ADVINFO, "XPT_DEV_ADVINFO" }, { XPT_ASYNC, "XPT_ASYNC" }, { XPT_ABORT, "XPT_ABORT" }, { XPT_RESET_BUS, "XPT_RESET_BUS" }, { XPT_RESET_DEV, "XPT_RESET_DEV" }, { XPT_TERM_IO, "XPT_TERM_IO" }, { XPT_SCAN_LUN, "XPT_SCAN_LUN" }, { XPT_GET_TRAN_SETTINGS, "XPT_GET_TRAN_SETTINGS" }, { XPT_SET_TRAN_SETTINGS, "XPT_SET_TRAN_SETTINGS" }, { XPT_CALC_GEOMETRY, "XPT_CALC_GEOMETRY" }, { XPT_ATA_IO, "XPT_ATA_IO" }, { XPT_GET_SIM_KNOB, "XPT_GET_SIM_KNOB" }, { XPT_SET_SIM_KNOB, "XPT_SET_SIM_KNOB" }, { XPT_NVME_IO, "XPT_NVME_IO" }, { XPT_MMC_IO, "XPT_MMC_IO" }, { XPT_SMP_IO, "XPT_SMP_IO" }, { XPT_SCAN_TGT, "XPT_SCAN_TGT" }, { XPT_NVME_ADMIN, "XPT_NVME_ADMIN" }, { XPT_ENG_INQ, "XPT_ENG_INQ" }, { XPT_ENG_EXEC, "XPT_ENG_EXEC" }, { XPT_EN_LUN, "XPT_EN_LUN" }, { XPT_TARGET_IO, "XPT_TARGET_IO" }, { XPT_ACCEPT_TARGET_IO, "XPT_ACCEPT_TARGET_IO" }, { XPT_CONT_TARGET_IO, "XPT_CONT_TARGET_IO" }, { XPT_IMMED_NOTIFY, "XPT_IMMED_NOTIFY" }, { XPT_NOTIFY_ACK, "XPT_NOTIFY_ACK" }, { XPT_IMMEDIATE_NOTIFY, "XPT_IMMEDIATE_NOTIFY" }, { XPT_NOTIFY_ACKNOWLEDGE, "XPT_NOTIFY_ACKNOWLEDGE" }, { 0, 0 } }; const char * xpt_action_name(uint32_t action) { static char buffer[32]; /* Only for unknown messages -- racy */ struct kv *walker = map; while (walker->name != NULL) { if (walker->v == action) return (walker->name); walker++; } snprintf(buffer, sizeof(buffer), "%#x", action); return (buffer); } diff --git a/sys/cam/scsi/scsi_da.c b/sys/cam/scsi/scsi_da.c index baba5d9ed839..05dd9b6e7566 100644 --- a/sys/cam/scsi/scsi_da.c +++ b/sys/cam/scsi/scsi_da.c @@ -1,6642 +1,6660 @@ /*- * Implementation of SCSI Direct Access Peripheral driver for CAM. * * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #ifdef _KERNEL #include "opt_da.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #endif /* _KERNEL */ #ifndef _KERNEL #include #include #endif /* _KERNEL */ #include #include #include #include #ifdef _KERNEL #include #endif /* _KERNEL */ #include #include #include #include #ifdef _KERNEL /* * Note that there are probe ordering dependencies here. The order isn't * controlled by this enumeration, but by explicit state transitions in * dastart() and dadone(). Here are some of the dependencies: * * 1. RC should come first, before RC16, unless there is evidence that RC16 * is supported. * 2. BDC needs to come before any of the ATA probes, or the ZONE probe. * 3. The ATA probes should go in this order: * ATA -> LOGDIR -> IDDIR -> SUP -> ATA_ZONE */ typedef enum { DA_STATE_PROBE_WP, DA_STATE_PROBE_RC, DA_STATE_PROBE_RC16, DA_STATE_PROBE_LBP, DA_STATE_PROBE_BLK_LIMITS, DA_STATE_PROBE_BDC, DA_STATE_PROBE_ATA, DA_STATE_PROBE_ATA_LOGDIR, DA_STATE_PROBE_ATA_IDDIR, DA_STATE_PROBE_ATA_SUP, DA_STATE_PROBE_ATA_ZONE, DA_STATE_PROBE_ZONE, DA_STATE_NORMAL } da_state; typedef enum { DA_FLAG_PACK_INVALID = 0x000001, DA_FLAG_NEW_PACK = 0x000002, DA_FLAG_PACK_LOCKED = 0x000004, DA_FLAG_PACK_REMOVABLE = 0x000008, DA_FLAG_ROTATING = 0x000010, DA_FLAG_NEED_OTAG = 0x000020, DA_FLAG_WAS_OTAG = 0x000040, DA_FLAG_RETRY_UA = 0x000080, DA_FLAG_OPEN = 0x000100, DA_FLAG_SCTX_INIT = 0x000200, DA_FLAG_CAN_RC16 = 0x000400, DA_FLAG_PROBED = 0x000800, DA_FLAG_DIRTY = 0x001000, DA_FLAG_ANNOUNCED = 0x002000, DA_FLAG_CAN_ATA_DMA = 0x004000, DA_FLAG_CAN_ATA_LOG = 0x008000, DA_FLAG_CAN_ATA_IDLOG = 0x010000, DA_FLAG_CAN_ATA_SUPCAP = 0x020000, DA_FLAG_CAN_ATA_ZONE = 0x040000, DA_FLAG_TUR_PENDING = 0x080000, DA_FLAG_UNMAPPEDIO = 0x100000 } da_flags; #define DA_FLAG_STRING \ "\020" \ "\001PACK_INVALID" \ "\002NEW_PACK" \ "\003PACK_LOCKED" \ "\004PACK_REMOVABLE" \ "\005ROTATING" \ "\006NEED_OTAG" \ "\007WAS_OTAG" \ "\010RETRY_UA" \ "\011OPEN" \ "\012SCTX_INIT" \ "\013CAN_RC16" \ "\014PROBED" \ "\015DIRTY" \ "\016ANNOUCNED" \ "\017CAN_ATA_DMA" \ "\020CAN_ATA_LOG" \ "\021CAN_ATA_IDLOG" \ "\022CAN_ATA_SUPACP" \ "\023CAN_ATA_ZONE" \ "\024TUR_PENDING" \ "\025UNMAPPEDIO" typedef enum { DA_Q_NONE = 0x00, DA_Q_NO_SYNC_CACHE = 0x01, DA_Q_NO_6_BYTE = 0x02, DA_Q_NO_PREVENT = 0x04, DA_Q_4K = 0x08, DA_Q_NO_RC16 = 0x10, DA_Q_NO_UNMAP = 0x20, DA_Q_RETRY_BUSY = 0x40, DA_Q_SMR_DM = 0x80, DA_Q_STRICT_UNMAP = 0x100, DA_Q_128KB = 0x200 } da_quirks; #define DA_Q_BIT_STRING \ "\020" \ "\001NO_SYNC_CACHE" \ "\002NO_6_BYTE" \ "\003NO_PREVENT" \ "\0044K" \ "\005NO_RC16" \ "\006NO_UNMAP" \ "\007RETRY_BUSY" \ "\010SMR_DM" \ "\011STRICT_UNMAP" \ "\012128KB" typedef enum { DA_CCB_PROBE_RC = 0x01, DA_CCB_PROBE_RC16 = 0x02, DA_CCB_PROBE_LBP = 0x03, DA_CCB_PROBE_BLK_LIMITS = 0x04, DA_CCB_PROBE_BDC = 0x05, DA_CCB_PROBE_ATA = 0x06, DA_CCB_BUFFER_IO = 0x07, DA_CCB_DUMP = 0x0A, DA_CCB_DELETE = 0x0B, DA_CCB_TUR = 0x0C, DA_CCB_PROBE_ZONE = 0x0D, DA_CCB_PROBE_ATA_LOGDIR = 0x0E, DA_CCB_PROBE_ATA_IDDIR = 0x0F, DA_CCB_PROBE_ATA_SUP = 0x10, DA_CCB_PROBE_ATA_ZONE = 0x11, DA_CCB_PROBE_WP = 0x12, DA_CCB_TYPE_MASK = 0x1F, DA_CCB_RETRY_UA = 0x20 } da_ccb_state; /* * Order here is important for method choice * * We prefer ATA_TRIM as tests run against a Sandforce 2281 SSD attached to * LSI 2008 (mps) controller (FW: v12, Drv: v14) resulted 20% quicker deletes * using ATA_TRIM than the corresponding UNMAP results for a real world mysql * import taking 5mins. * */ typedef enum { DA_DELETE_NONE, DA_DELETE_DISABLE, DA_DELETE_ATA_TRIM, DA_DELETE_UNMAP, DA_DELETE_WS16, DA_DELETE_WS10, DA_DELETE_ZERO, DA_DELETE_MIN = DA_DELETE_ATA_TRIM, DA_DELETE_MAX = DA_DELETE_ZERO } da_delete_methods; /* * For SCSI, host managed drives show up as a separate device type. For * ATA, host managed drives also have a different device signature. * XXX KDM figure out the ATA host managed signature. */ typedef enum { DA_ZONE_NONE = 0x00, DA_ZONE_DRIVE_MANAGED = 0x01, DA_ZONE_HOST_AWARE = 0x02, DA_ZONE_HOST_MANAGED = 0x03 } da_zone_mode; /* * We distinguish between these interface cases in addition to the drive type: * o ATA drive behind a SCSI translation layer that knows about ZBC/ZAC * o ATA drive behind a SCSI translation layer that does not know about * ZBC/ZAC, and so needs to be managed via ATA passthrough. In this * case, we would need to share the ATA code with the ada(4) driver. * o SCSI drive. */ typedef enum { DA_ZONE_IF_SCSI, DA_ZONE_IF_ATA_PASS, DA_ZONE_IF_ATA_SAT, } da_zone_interface; typedef enum { DA_ZONE_FLAG_RZ_SUP = 0x0001, DA_ZONE_FLAG_OPEN_SUP = 0x0002, DA_ZONE_FLAG_CLOSE_SUP = 0x0004, DA_ZONE_FLAG_FINISH_SUP = 0x0008, DA_ZONE_FLAG_RWP_SUP = 0x0010, DA_ZONE_FLAG_SUP_MASK = (DA_ZONE_FLAG_RZ_SUP | DA_ZONE_FLAG_OPEN_SUP | DA_ZONE_FLAG_CLOSE_SUP | DA_ZONE_FLAG_FINISH_SUP | DA_ZONE_FLAG_RWP_SUP), DA_ZONE_FLAG_URSWRZ = 0x0020, DA_ZONE_FLAG_OPT_SEQ_SET = 0x0040, DA_ZONE_FLAG_OPT_NONSEQ_SET = 0x0080, DA_ZONE_FLAG_MAX_SEQ_SET = 0x0100, DA_ZONE_FLAG_SET_MASK = (DA_ZONE_FLAG_OPT_SEQ_SET | DA_ZONE_FLAG_OPT_NONSEQ_SET | DA_ZONE_FLAG_MAX_SEQ_SET) } da_zone_flags; static struct da_zone_desc { da_zone_flags value; const char *desc; } da_zone_desc_table[] = { {DA_ZONE_FLAG_RZ_SUP, "Report Zones" }, {DA_ZONE_FLAG_OPEN_SUP, "Open" }, {DA_ZONE_FLAG_CLOSE_SUP, "Close" }, {DA_ZONE_FLAG_FINISH_SUP, "Finish" }, {DA_ZONE_FLAG_RWP_SUP, "Reset Write Pointer" }, }; typedef void da_delete_func_t (struct cam_periph *periph, union ccb *ccb, struct bio *bp); static da_delete_func_t da_delete_trim; static da_delete_func_t da_delete_unmap; static da_delete_func_t da_delete_ws; static const void * da_delete_functions[] = { NULL, NULL, da_delete_trim, da_delete_unmap, da_delete_ws, da_delete_ws, da_delete_ws }; static const char *da_delete_method_names[] = { "NONE", "DISABLE", "ATA_TRIM", "UNMAP", "WS16", "WS10", "ZERO" }; static const char *da_delete_method_desc[] = { "NONE", "DISABLED", "ATA TRIM", "UNMAP", "WRITE SAME(16) with UNMAP", "WRITE SAME(10) with UNMAP", "ZERO" }; /* Offsets into our private area for storing information */ #define ccb_state ppriv_field0 #define ccb_bp ppriv_ptr1 struct disk_params { u_int8_t heads; u_int32_t cylinders; u_int8_t secs_per_track; u_int32_t secsize; /* Number of bytes/sector */ u_int64_t sectors; /* total number sectors */ u_int stripesize; u_int stripeoffset; }; #define UNMAP_RANGE_MAX 0xffffffff #define UNMAP_HEAD_SIZE 8 #define UNMAP_RANGE_SIZE 16 #define UNMAP_MAX_RANGES 2048 /* Protocol Max is 4095 */ #define UNMAP_BUF_SIZE ((UNMAP_MAX_RANGES * UNMAP_RANGE_SIZE) + \ UNMAP_HEAD_SIZE) #define WS10_MAX_BLKS 0xffff #define WS16_MAX_BLKS 0xffffffff #define ATA_TRIM_MAX_RANGES ((UNMAP_BUF_SIZE / \ (ATA_DSM_RANGE_SIZE * ATA_DSM_BLK_SIZE)) * ATA_DSM_BLK_SIZE) #define DA_WORK_TUR (1 << 16) typedef enum { DA_REF_OPEN = 1, DA_REF_OPEN_HOLD, DA_REF_CLOSE_HOLD, DA_REF_PROBE_HOLD, DA_REF_TUR, DA_REF_GEOM, DA_REF_SYSCTL, DA_REF_REPROBE, DA_REF_MAX /* KEEP LAST */ } da_ref_token; struct da_softc { struct cam_iosched_softc *cam_iosched; struct bio_queue_head delete_run_queue; LIST_HEAD(, ccb_hdr) pending_ccbs; int refcount; /* Active xpt_action() calls */ da_state state; da_flags flags; da_quirks quirks; int minimum_cmd_size; int error_inject; int trim_max_ranges; int delete_available; /* Delete methods possibly available */ da_zone_mode zone_mode; da_zone_interface zone_interface; da_zone_flags zone_flags; struct ata_gp_log_dir ata_logdir; int valid_logdir_len; struct ata_identify_log_pages ata_iddir; int valid_iddir_len; uint64_t optimal_seq_zones; uint64_t optimal_nonseq_zones; uint64_t max_seq_zones; u_int maxio; uint32_t unmap_max_ranges; uint32_t unmap_max_lba; /* Max LBAs in UNMAP req */ uint32_t unmap_gran; uint32_t unmap_gran_align; uint64_t ws_max_blks; uint64_t trim_count; uint64_t trim_ranges; uint64_t trim_lbas; da_delete_methods delete_method_pref; da_delete_methods delete_method; da_delete_func_t *delete_func; int p_type; struct disk_params params; struct disk *disk; union ccb saved_ccb; struct task sysctl_task; struct sysctl_ctx_list sysctl_ctx; struct sysctl_oid *sysctl_tree; struct callout sendordered_c; uint64_t wwpn; uint8_t unmap_buf[UNMAP_BUF_SIZE]; struct scsi_read_capacity_data_long rcaplong; struct callout mediapoll_c; int ref_flags[DA_REF_MAX]; #ifdef CAM_IO_STATS struct sysctl_ctx_list sysctl_stats_ctx; struct sysctl_oid *sysctl_stats_tree; u_int errors; u_int timeouts; u_int invalidations; #endif #define DA_ANNOUNCETMP_SZ 160 char announce_temp[DA_ANNOUNCETMP_SZ]; #define DA_ANNOUNCE_SZ 400 char announcebuf[DA_ANNOUNCE_SZ]; }; #define dadeleteflag(softc, delete_method, enable) \ if (enable) { \ softc->delete_available |= (1 << delete_method); \ } else { \ softc->delete_available &= ~(1 << delete_method); \ } +static uma_zone_t da_ccb_zone; + struct da_quirk_entry { struct scsi_inquiry_pattern inq_pat; da_quirks quirks; }; static const char quantum[] = "QUANTUM"; static const char microp[] = "MICROP"; static struct da_quirk_entry da_quirk_table[] = { /* SPI, FC devices */ { /* * Fujitsu M2513A MO drives. * Tested devices: M2513A2 firmware versions 1200 & 1300. * (dip switch selects whether T_DIRECT or T_OPTICAL device) * Reported by: W.Scholten */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "FUJITSU", "M2513A", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* See above. */ {T_OPTICAL, SIP_MEDIA_REMOVABLE, "FUJITSU", "M2513A", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * This particular Fujitsu drive doesn't like the * synchronize cache command. * Reported by: Tom Jackson */ {T_DIRECT, SIP_MEDIA_FIXED, "FUJITSU", "M2954*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * This drive doesn't like the synchronize cache command * either. Reported by: Matthew Jacob * in NetBSD PR kern/6027, August 24, 1998. */ {T_DIRECT, SIP_MEDIA_FIXED, microp, "2217*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * This drive doesn't like the synchronize cache command * either. Reported by: Hellmuth Michaelis (hm@kts.org) * (PR 8882). */ {T_DIRECT, SIP_MEDIA_FIXED, microp, "2112*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Doesn't like the synchronize cache command. * Reported by: Blaz Zupan */ {T_DIRECT, SIP_MEDIA_FIXED, "NEC", "D3847*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Doesn't like the synchronize cache command. * Reported by: Blaz Zupan */ {T_DIRECT, SIP_MEDIA_FIXED, quantum, "MAVERICK 540S", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Doesn't like the synchronize cache command. */ {T_DIRECT, SIP_MEDIA_FIXED, quantum, "LPS525S", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Doesn't like the synchronize cache command. * Reported by: walter@pelissero.de */ {T_DIRECT, SIP_MEDIA_FIXED, quantum, "LPS540S", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Doesn't work correctly with 6 byte reads/writes. * Returns illegal request, and points to byte 9 of the * 6-byte CDB. * Reported by: Adam McDougall */ {T_DIRECT, SIP_MEDIA_FIXED, quantum, "VIKING 4*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE }, { /* See above. */ {T_DIRECT, SIP_MEDIA_FIXED, quantum, "VIKING 2*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE }, { /* * Doesn't like the synchronize cache command. * Reported by: walter@pelissero.de */ {T_DIRECT, SIP_MEDIA_FIXED, "CONNER", "CP3500*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * The CISS RAID controllers do not support SYNC_CACHE */ {T_DIRECT, SIP_MEDIA_FIXED, "COMPAQ", "RAID*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * The STEC SSDs sometimes hang on UNMAP. */ {T_DIRECT, SIP_MEDIA_FIXED, "STEC", "*", "*"}, /*quirks*/ DA_Q_NO_UNMAP }, { /* * VMware returns BUSY status when storage has transient * connectivity problems, so better wait. * Also VMware returns odd errors on misaligned UNMAPs. */ {T_DIRECT, SIP_MEDIA_FIXED, "VMware*", "*", "*"}, /*quirks*/ DA_Q_RETRY_BUSY | DA_Q_STRICT_UNMAP }, /* USB mass storage devices supported by umass(4) */ { /* * EXATELECOM (Sigmatel) i-Bead 100/105 USB Flash MP3 Player * PR: kern/51675 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "EXATEL", "i-BEAD10*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Power Quotient Int. (PQI) USB flash key * PR: kern/53067 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "USB Flash Disk*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Creative Nomad MUVO mp3 player (USB) * PR: kern/53094 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "CREATIVE", "NOMAD_MUVO", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT }, { /* * Jungsoft NEXDISK USB flash key * PR: kern/54737 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "JUNGSOFT", "NEXDISK*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * FreeDik USB Mini Data Drive * PR: kern/54786 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "FreeDik*", "Mini Data Drive", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Sigmatel USB Flash MP3 Player * PR: kern/57046 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "SigmaTel", "MSCN", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT }, { /* * Neuros USB Digital Audio Computer * PR: kern/63645 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "NEUROS", "dig. audio comp.", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * SEAGRAND NP-900 MP3 Player * PR: kern/64563 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "SEAGRAND", "NP-900*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT }, { /* * iRiver iFP MP3 player (with UMS Firmware) * PR: kern/54881, i386/63941, kern/66124 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "iRiver", "iFP*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Frontier Labs NEX IA+ Digital Audio Player, rev 1.10/0.01 * PR: kern/70158 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "FL" , "Nex*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * ZICPlay USB MP3 Player with FM * PR: kern/75057 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "ACTIONS*" , "USB DISK*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * TEAC USB floppy mechanisms */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "TEAC" , "FD-05*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Kingston DataTraveler II+ USB Pen-Drive. * Reported by: Pawel Jakub Dawidek */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Kingston" , "DataTraveler II+", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * USB DISK Pro PMAP * Reported by: jhs * PR: usb/96381 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, " ", "USB DISK Pro", "PMAP"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Motorola E398 Mobile Phone (TransFlash memory card). * Reported by: Wojciech A. Koszek * PR: usb/89889 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Motorola" , "Motorola Phone", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Qware BeatZkey! Pro * PR: usb/79164 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "GENERIC", "USB DISK DEVICE", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Time DPA20B 1GB MP3 Player * PR: usb/81846 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "USB2.0*", "(FS) FLASH DISK*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Samsung USB key 128Mb * PR: usb/90081 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "USB-DISK", "FreeDik-FlashUsb", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Kingston DataTraveler 2.0 USB Flash memory. * PR: usb/89196 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Kingston", "DataTraveler 2.0", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Creative MUVO Slim mp3 player (USB) * PR: usb/86131 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "CREATIVE", "MuVo Slim", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE|DA_Q_NO_PREVENT }, { /* * United MP5512 Portable MP3 Player (2-in-1 USB DISK/MP3) * PR: usb/80487 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "MUSIC DISK", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * SanDisk Micro Cruzer 128MB * PR: usb/75970 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "SanDisk" , "Micro Cruzer", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * TOSHIBA TransMemory USB sticks * PR: kern/94660 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "TOSHIBA", "TransMemory", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * PNY USB 3.0 Flash Drives */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "PNY", "USB 3.0 FD*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_NO_RC16 }, { /* * PNY USB Flash keys * PR: usb/75578, usb/72344, usb/65436 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "*" , "USB DISK*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Genesys GL3224 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "STORAGE DEVICE*", "120?"}, /*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_4K | DA_Q_NO_RC16 }, { /* * Genesys 6-in-1 Card Reader * PR: usb/94647 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic*", "STORAGE DEVICE*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Rekam Digital CAMERA * PR: usb/98713 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "CAMERA*", "4MP-9J6*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * iRiver H10 MP3 player * PR: usb/102547 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "iriver", "H10*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * iRiver U10 MP3 player * PR: usb/92306 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "iriver", "U10*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * X-Micro Flash Disk * PR: usb/96901 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "X-Micro", "Flash Disk", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * EasyMP3 EM732X USB 2.0 Flash MP3 Player * PR: usb/96546 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "EM732X", "MP3 Player*", "1.00"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Denver MP3 player * PR: usb/107101 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "DENVER", "MP3 PLAYER", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Philips USB Key Audio KEY013 * PR: usb/68412 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "PHILIPS", "Key*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_NO_PREVENT }, { /* * JNC MP3 Player * PR: usb/94439 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "JNC*" , "MP3 Player*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * SAMSUNG MP0402H * PR: usb/108427 */ {T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "MP0402H", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * I/O Magic USB flash - Giga Bank * PR: usb/108810 */ {T_DIRECT, SIP_MEDIA_FIXED, "GS-Magic", "stor*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * JoyFly 128mb USB Flash Drive * PR: 96133 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "USB 2.0", "Flash Disk*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * ChipsBnk usb stick * PR: 103702 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "ChipsBnk", "USB*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Storcase (Kingston) InfoStation IFS FC2/SATA-R 201A * PR: 129858 */ {T_DIRECT, SIP_MEDIA_FIXED, "IFS", "FC2/SATA-R*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Samsung YP-U3 mp3-player * PR: 125398 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Samsung", "YP-U3", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { {T_DIRECT, SIP_MEDIA_REMOVABLE, "Netac", "OnlyDisk*", "2000"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Sony Cyber-Shot DSC cameras * PR: usb/137035 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "Sony", "Sony DSC", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE | DA_Q_NO_PREVENT }, { {T_DIRECT, SIP_MEDIA_REMOVABLE, "Kingston", "DataTraveler G3", "1.00"}, /*quirks*/ DA_Q_NO_PREVENT }, { /* At least several Transcent USB sticks lie on RC16. */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "JetFlash", "Transcend*", "*"}, /*quirks*/ DA_Q_NO_RC16 }, { /* * I-O Data USB Flash Disk * PR: usb/211716 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "I-O DATA", "USB Flash Disk*", "*"}, /*quirks*/ DA_Q_NO_RC16 }, { /* * SLC CHIPFANCIER USB drives * PR: usb/234503 (RC10 right, RC16 wrong) * 16GB, 32GB and 128GB confirmed to have same issue */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "*SLC", "CHIPFANCIER", "*"}, /*quirks*/ DA_Q_NO_RC16 }, /* ATA/SATA devices over SAS/USB/... */ { /* Sandisk X400 */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SanDisk SD8SB8U1*", "*" }, /*quirks*/DA_Q_128KB }, { /* Hitachi Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "Hitachi", "H??????????E3*", "*" }, /*quirks*/DA_Q_4K }, { /* Micron Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Micron 5100 MTFDDAK*", "*" }, /*quirks*/DA_Q_4K }, { /* Samsung Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG HD155UI*", "*" }, /*quirks*/DA_Q_4K }, { /* Samsung Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "HD155UI*", "*" }, /*quirks*/DA_Q_4K }, { /* Samsung Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG HD204UI*", "*" }, /*quirks*/DA_Q_4K }, { /* Samsung Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "HD204UI*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST????DL*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST????DL", "*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST???DM*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST???DM*", "*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST????DM*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Barracuda Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST????DM", "*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9500423AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST950042", "3AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9500424AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST950042", "4AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9640423AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST964042", "3AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9640424AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST964042", "4AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9750420AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST975042", "0AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9750422AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST975042", "2AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST9750423AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST975042", "3AS*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Thin Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST???LT*", "*" }, /*quirks*/DA_Q_4K }, { /* Seagate Momentus Thin Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ST???LT*", "*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD????RS*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "??RS*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD????RX*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "??RX*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD??????RS*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "????RS*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD??????RX*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Caviar Green Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "????RX*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD???PKT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "?PKT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD?????PKT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Black Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "???PKT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Blue Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD???PVT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Blue Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "?PVT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Blue Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "WDC WD?????PVT*", "*" }, /*quirks*/DA_Q_4K }, { /* WDC Scorpio Blue Advanced Format (4k) drives */ { T_DIRECT, SIP_MEDIA_FIXED, "WDC WD??", "???PVT*", "*" }, /*quirks*/DA_Q_4K }, { /* * Olympus digital cameras (C-3040ZOOM, C-2040ZOOM, C-1) * PR: usb/97472 */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "C*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE | DA_Q_NO_SYNC_CACHE }, { /* * Olympus digital cameras (D-370) * PR: usb/97472 */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "D*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE }, { /* * Olympus digital cameras (E-100RS, E-10). * PR: usb/97472 */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "E*", "*"}, /*quirks*/ DA_Q_NO_6_BYTE | DA_Q_NO_SYNC_CACHE }, { /* * Olympus FE-210 camera */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "OLYMPUS", "FE210*", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Pentax Digital Camera * PR: usb/93389 */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "PENTAX", "DIGITAL CAMERA", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * LG UP3S MP3 player */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "LG", "UP3S", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * Laser MP3-2GA13 MP3 player */ {T_DIRECT, SIP_MEDIA_REMOVABLE, "USB 2.0", "(HS) Flash Disk", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, { /* * LaCie external 250GB Hard drive des by Porsche * Submitted by: Ben Stuyts * PR: 121474 */ {T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "HM250JI", "*"}, /*quirks*/ DA_Q_NO_SYNC_CACHE }, /* SATA SSDs */ { /* * Corsair Force 2 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Corsair CSSD-F*", "*" }, /*quirks*/DA_Q_4K }, { /* * Corsair Force 3 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Corsair Force 3*", "*" }, /*quirks*/DA_Q_4K }, { /* * Corsair Neutron GTX SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "Corsair Neutron GTX*", "*" }, /*quirks*/DA_Q_4K }, { /* * Corsair Force GT & GS SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Corsair Force G*", "*" }, /*quirks*/DA_Q_4K }, { /* * Crucial M4 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "M4-CT???M4SSD2*", "*" }, /*quirks*/DA_Q_4K }, { /* * Crucial RealSSD C300 SSDs * 4k optimised */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "C300-CTFDDAC???MAG*", "*" }, /*quirks*/DA_Q_4K }, { /* * Intel 320 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSA2CW*", "*" }, /*quirks*/DA_Q_4K }, { /* * Intel 330 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2CT*", "*" }, /*quirks*/DA_Q_4K }, { /* * Intel 510 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2MH*", "*" }, /*quirks*/DA_Q_4K }, { /* * Intel 520 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2BW*", "*" }, /*quirks*/DA_Q_4K }, { /* * Intel S3610 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSC2BX*", "*" }, /*quirks*/DA_Q_4K }, { /* * Intel X25-M Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "INTEL SSDSA2M*", "*" }, /*quirks*/DA_Q_4K }, { /* * Kingston E100 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "KINGSTON SE100S3*", "*" }, /*quirks*/DA_Q_4K }, { /* * Kingston HyperX 3k SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "KINGSTON SH103S3*", "*" }, /*quirks*/DA_Q_4K }, { /* * Marvell SSDs (entry taken from OpenSolaris) * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "MARVELL SD88SA02*", "*" }, /*quirks*/DA_Q_4K }, { /* * OCZ Agility 2 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "*", "OCZ-AGILITY2*", "*" }, /*quirks*/DA_Q_4K }, { /* * OCZ Agility 3 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ-AGILITY3*", "*" }, /*quirks*/DA_Q_4K }, { /* * OCZ Deneva R Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "DENRSTE251M45*", "*" }, /*quirks*/DA_Q_4K }, { /* * OCZ Vertex 2 SSDs (inc pro series) * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ?VERTEX2*", "*" }, /*quirks*/DA_Q_4K }, { /* * OCZ Vertex 3 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ-VERTEX3*", "*" }, /*quirks*/DA_Q_4K }, { /* * OCZ Vertex 4 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "OCZ-VERTEX4*", "*" }, /*quirks*/DA_Q_4K }, { /* * Samsung 750 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 750*", "*" }, /*quirks*/DA_Q_4K }, { /* * Samsung 830 Series SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG SSD 830 Series*", "*" }, /*quirks*/DA_Q_4K }, { /* * Samsung 840 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 840*", "*" }, /*quirks*/DA_Q_4K }, { /* * Samsung 845 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 845*", "*" }, /*quirks*/DA_Q_4K }, { /* * Samsung 850 SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "Samsung SSD 850*", "*" }, /*quirks*/DA_Q_4K }, { /* * Samsung 843T Series SSDs (MZ7WD*) * Samsung PM851 Series SSDs (MZ7TE*) * Samsung PM853T Series SSDs (MZ7GE*) * Samsung SM863 Series SSDs (MZ7KM*) * 4k optimised */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SAMSUNG MZ7*", "*" }, /*quirks*/DA_Q_4K }, { /* * Same as for SAMSUNG MZ7* but enable the quirks for SSD * starting with MZ7* too */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "MZ7*", "*" }, /*quirks*/DA_Q_4K }, { /* * Same as above but enable the quirks for SSD SAMSUNG MZ7* * connected via SATA-to-SAS interposer and because of this * starting without "ATA" */ { T_DIRECT, SIP_MEDIA_FIXED, "SAMSUNG", "MZ7*", "*" }, /*quirks*/DA_Q_4K }, { /* * SuperTalent TeraDrive CT SSDs * 4k optimised & trim only works in 4k requests + 4k aligned */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "FTM??CT25H*", "*" }, /*quirks*/DA_Q_4K }, { /* * XceedIOPS SATA SSDs * 4k optimised */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "SG9XCS2D*", "*" }, /*quirks*/DA_Q_4K }, { /* * Hama Innostor USB-Stick */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "Innostor", "Innostor*", "*" }, /*quirks*/DA_Q_NO_RC16 }, { /* * Seagate Lamarr 8TB Shingled Magnetic Recording (SMR) * Drive Managed SATA hard drive. This drive doesn't report * in firmware that it is a drive managed SMR drive. */ { T_DIRECT, SIP_MEDIA_FIXED, "ATA", "ST8000AS000[23]*", "*" }, /*quirks*/DA_Q_SMR_DM }, { /* * MX-ES USB Drive by Mach Xtreme */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "MX", "MXUB3*", "*"}, /*quirks*/DA_Q_NO_RC16 }, }; static disk_strategy_t dastrategy; static dumper_t dadump; static periph_init_t dainit; static void daasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg); static void dasysctlinit(void *context, int pending); static int dasysctlsofttimeout(SYSCTL_HANDLER_ARGS); static int dacmdsizesysctl(SYSCTL_HANDLER_ARGS); static int dadeletemethodsysctl(SYSCTL_HANDLER_ARGS); static int dabitsysctl(SYSCTL_HANDLER_ARGS); static int daflagssysctl(SYSCTL_HANDLER_ARGS); static int dazonemodesysctl(SYSCTL_HANDLER_ARGS); static int dazonesupsysctl(SYSCTL_HANDLER_ARGS); static int dadeletemaxsysctl(SYSCTL_HANDLER_ARGS); static void dadeletemethodset(struct da_softc *softc, da_delete_methods delete_method); static off_t dadeletemaxsize(struct da_softc *softc, da_delete_methods delete_method); static void dadeletemethodchoose(struct da_softc *softc, da_delete_methods default_method); static void daprobedone(struct cam_periph *periph, union ccb *ccb); static periph_ctor_t daregister; static periph_dtor_t dacleanup; static periph_start_t dastart; static periph_oninv_t daoninvalidate; static void dazonedone(struct cam_periph *periph, union ccb *ccb); static void dadone(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probewp(struct cam_periph *periph, union ccb *done_ccb); static void dadone_proberc(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probelbp(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probeblklimits(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probebdc(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probeata(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probeatalogdir(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probeataiddir(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probeatasup(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probeatazone(struct cam_periph *periph, union ccb *done_ccb); static void dadone_probezone(struct cam_periph *periph, union ccb *done_ccb); static void dadone_tur(struct cam_periph *periph, union ccb *done_ccb); static int daerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags); static void daprevent(struct cam_periph *periph, int action); static void dareprobe(struct cam_periph *periph); static void dasetgeom(struct cam_periph *periph, uint32_t block_len, uint64_t maxsector, struct scsi_read_capacity_data_long *rcaplong, size_t rcap_size); static callout_func_t dasendorderedtag; static void dashutdown(void *arg, int howto); static callout_func_t damediapoll; #ifndef DA_DEFAULT_POLL_PERIOD #define DA_DEFAULT_POLL_PERIOD 3 #endif #ifndef DA_DEFAULT_TIMEOUT #define DA_DEFAULT_TIMEOUT 60 /* Timeout in seconds */ #endif #ifndef DA_DEFAULT_SOFTTIMEOUT #define DA_DEFAULT_SOFTTIMEOUT 0 #endif #ifndef DA_DEFAULT_RETRY #define DA_DEFAULT_RETRY 4 #endif #ifndef DA_DEFAULT_SEND_ORDERED #define DA_DEFAULT_SEND_ORDERED 1 #endif static int da_poll_period = DA_DEFAULT_POLL_PERIOD; static int da_retry_count = DA_DEFAULT_RETRY; static int da_default_timeout = DA_DEFAULT_TIMEOUT; static sbintime_t da_default_softtimeout = DA_DEFAULT_SOFTTIMEOUT; static int da_send_ordered = DA_DEFAULT_SEND_ORDERED; static int da_disable_wp_detection = 0; static int da_enable_biospeedup = 1; +static int da_enable_uma_ccbs = 0; static SYSCTL_NODE(_kern_cam, OID_AUTO, da, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "CAM Direct Access Disk driver"); SYSCTL_INT(_kern_cam_da, OID_AUTO, poll_period, CTLFLAG_RWTUN, &da_poll_period, 0, "Media polling period in seconds"); SYSCTL_INT(_kern_cam_da, OID_AUTO, retry_count, CTLFLAG_RWTUN, &da_retry_count, 0, "Normal I/O retry count"); SYSCTL_INT(_kern_cam_da, OID_AUTO, default_timeout, CTLFLAG_RWTUN, &da_default_timeout, 0, "Normal I/O timeout (in seconds)"); SYSCTL_INT(_kern_cam_da, OID_AUTO, send_ordered, CTLFLAG_RWTUN, &da_send_ordered, 0, "Send Ordered Tags"); SYSCTL_INT(_kern_cam_da, OID_AUTO, disable_wp_detection, CTLFLAG_RWTUN, &da_disable_wp_detection, 0, "Disable detection of write-protected disks"); SYSCTL_INT(_kern_cam_da, OID_AUTO, enable_biospeedup, CTLFLAG_RDTUN, &da_enable_biospeedup, 0, "Enable BIO_SPEEDUP processing"); +SYSCTL_INT(_kern_cam_da, OID_AUTO, enable_uma_ccbs, CTLFLAG_RWTUN, + &da_enable_uma_ccbs, 0, "Use UMA for CCBs"); SYSCTL_PROC(_kern_cam_da, OID_AUTO, default_softtimeout, CTLTYPE_UINT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, NULL, 0, dasysctlsofttimeout, "I", "Soft I/O timeout (ms)"); TUNABLE_INT64("kern.cam.da.default_softtimeout", &da_default_softtimeout); /* * DA_ORDEREDTAG_INTERVAL determines how often, relative * to the default timeout, we check to see whether an ordered * tagged transaction is appropriate to prevent simple tag * starvation. Since we'd like to ensure that there is at least * 1/2 of the timeout length left for a starved transaction to * complete after we've sent an ordered tag, we must poll at least * four times in every timeout period. This takes care of the worst * case where a starved transaction starts during an interval that * meets the requirement "don't send an ordered tag" test so it takes * us two intervals to determine that a tag must be sent. */ #ifndef DA_ORDEREDTAG_INTERVAL #define DA_ORDEREDTAG_INTERVAL 4 #endif static struct periph_driver dadriver = { dainit, "da", TAILQ_HEAD_INITIALIZER(dadriver.units), /* generation */ 0 }; PERIPHDRIVER_DECLARE(da, dadriver); static MALLOC_DEFINE(M_SCSIDA, "scsi_da", "scsi_da buffers"); /* * This driver takes out references / holds in well defined pairs, never * recursively. These macros / inline functions enforce those rules. They * are only enabled with DA_TRACK_REFS or INVARIANTS. If DA_TRACK_REFS is * defined to be 2 or larger, the tracking also includes debug printfs. */ #if defined(DA_TRACK_REFS) || defined(INVARIANTS) #ifndef DA_TRACK_REFS #define DA_TRACK_REFS 1 #endif #if DA_TRACK_REFS > 1 static const char *da_ref_text[] = { "bogus", "open", "open hold", "close hold", "reprobe hold", "Test Unit Ready", "Geom", "sysctl", "reprobe", "max -- also bogus" }; #define DA_PERIPH_PRINT(periph, msg, args...) \ CAM_PERIPH_PRINT(periph, msg, ##args) #else #define DA_PERIPH_PRINT(periph, msg, args...) #endif static inline void token_sanity(da_ref_token token) { if ((unsigned)token >= DA_REF_MAX) panic("Bad token value passed in %d\n", token); } static inline int da_periph_hold(struct cam_periph *periph, int priority, da_ref_token token) { int err = cam_periph_hold(periph, priority); token_sanity(token); DA_PERIPH_PRINT(periph, "Holding device %s (%d): %d\n", da_ref_text[token], token, err); if (err == 0) { int cnt; struct da_softc *softc = periph->softc; cnt = atomic_fetchadd_int(&softc->ref_flags[token], 1); if (cnt != 0) panic("Re-holding for reason %d, cnt = %d", token, cnt); } return (err); } static inline void da_periph_unhold(struct cam_periph *periph, da_ref_token token) { int cnt; struct da_softc *softc = periph->softc; token_sanity(token); DA_PERIPH_PRINT(periph, "Unholding device %s (%d)\n", da_ref_text[token], token); cnt = atomic_fetchadd_int(&softc->ref_flags[token], -1); if (cnt != 1) panic("Unholding %d with cnt = %d", token, cnt); cam_periph_unhold(periph); } static inline int da_periph_acquire(struct cam_periph *periph, da_ref_token token) { int err = cam_periph_acquire(periph); token_sanity(token); DA_PERIPH_PRINT(periph, "acquiring device %s (%d): %d\n", da_ref_text[token], token, err); if (err == 0) { int cnt; struct da_softc *softc = periph->softc; cnt = atomic_fetchadd_int(&softc->ref_flags[token], 1); if (cnt != 0) panic("Re-refing for reason %d, cnt = %d", token, cnt); } return (err); } static inline void da_periph_release(struct cam_periph *periph, da_ref_token token) { int cnt; struct da_softc *softc = periph->softc; token_sanity(token); DA_PERIPH_PRINT(periph, "releasing device %s (%d)\n", da_ref_text[token], token); cnt = atomic_fetchadd_int(&softc->ref_flags[token], -1); if (cnt != 1) panic("Releasing %d with cnt = %d", token, cnt); cam_periph_release(periph); } static inline void da_periph_release_locked(struct cam_periph *periph, da_ref_token token) { int cnt; struct da_softc *softc = periph->softc; token_sanity(token); DA_PERIPH_PRINT(periph, "releasing device (locked) %s (%d)\n", da_ref_text[token], token); cnt = atomic_fetchadd_int(&softc->ref_flags[token], -1); if (cnt != 1) panic("releasing (locked) %d with cnt = %d", token, cnt); cam_periph_release_locked(periph); } #define cam_periph_hold POISON #define cam_periph_unhold POISON #define cam_periph_acquire POISON #define cam_periph_release POISON #define cam_periph_release_locked POISON #else #define da_periph_hold(periph, prio, token) cam_periph_hold((periph), (prio)) #define da_periph_unhold(periph, token) cam_periph_unhold((periph)) #define da_periph_acquire(periph, token) cam_periph_acquire((periph)) #define da_periph_release(periph, token) cam_periph_release((periph)) #define da_periph_release_locked(periph, token) cam_periph_release_locked((periph)) #endif static int daopen(struct disk *dp) { struct cam_periph *periph; struct da_softc *softc; int error; periph = (struct cam_periph *)dp->d_drv1; if (da_periph_acquire(periph, DA_REF_OPEN) != 0) { return (ENXIO); } cam_periph_lock(periph); if ((error = da_periph_hold(periph, PRIBIO|PCATCH, DA_REF_OPEN_HOLD)) != 0) { cam_periph_unlock(periph); da_periph_release(periph, DA_REF_OPEN); return (error); } CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH, ("daopen\n")); softc = (struct da_softc *)periph->softc; dareprobe(periph); /* Wait for the disk size update. */ error = cam_periph_sleep(periph, &softc->disk->d_mediasize, PRIBIO, "dareprobe", 0); if (error != 0) xpt_print(periph->path, "unable to retrieve capacity data\n"); if (periph->flags & CAM_PERIPH_INVALID) error = ENXIO; if (error == 0 && (softc->flags & DA_FLAG_PACK_REMOVABLE) != 0 && (softc->quirks & DA_Q_NO_PREVENT) == 0) daprevent(periph, PR_PREVENT); if (error == 0) { softc->flags &= ~DA_FLAG_PACK_INVALID; softc->flags |= DA_FLAG_OPEN; } da_periph_unhold(periph, DA_REF_OPEN_HOLD); cam_periph_unlock(periph); if (error != 0) da_periph_release(periph, DA_REF_OPEN); return (error); } static int daclose(struct disk *dp) { struct cam_periph *periph; struct da_softc *softc; union ccb *ccb; periph = (struct cam_periph *)dp->d_drv1; softc = (struct da_softc *)periph->softc; cam_periph_lock(periph); CAM_DEBUG(periph->path, CAM_DEBUG_TRACE | CAM_DEBUG_PERIPH, ("daclose\n")); if (da_periph_hold(periph, PRIBIO, DA_REF_CLOSE_HOLD) == 0) { /* Flush disk cache. */ if ((softc->flags & DA_FLAG_DIRTY) != 0 && (softc->quirks & DA_Q_NO_SYNC_CACHE) == 0 && (softc->flags & DA_FLAG_PACK_INVALID) == 0) { ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); scsi_synchronize_cache(&ccb->csio, /*retries*/1, /*cbfcnp*/NULL, MSG_SIMPLE_Q_TAG, /*begin_lba*/0, /*lb_count*/0, SSD_FULL_SIZE, 5 * 60 * 1000); cam_periph_runccb(ccb, daerror, /*cam_flags*/0, /*sense_flags*/SF_RETRY_UA | SF_QUIET_IR, softc->disk->d_devstat); softc->flags &= ~DA_FLAG_DIRTY; xpt_release_ccb(ccb); } /* Allow medium removal. */ if ((softc->flags & DA_FLAG_PACK_REMOVABLE) != 0 && (softc->quirks & DA_Q_NO_PREVENT) == 0) daprevent(periph, PR_ALLOW); da_periph_unhold(periph, DA_REF_CLOSE_HOLD); } /* * If we've got removable media, mark the blocksize as * unavailable, since it could change when new media is * inserted. */ if ((softc->flags & DA_FLAG_PACK_REMOVABLE) != 0) softc->disk->d_devstat->flags |= DEVSTAT_BS_UNAVAILABLE; softc->flags &= ~DA_FLAG_OPEN; while (softc->refcount != 0) cam_periph_sleep(periph, &softc->refcount, PRIBIO, "daclose", 1); cam_periph_unlock(periph); da_periph_release(periph, DA_REF_OPEN); return (0); } static void daschedule(struct cam_periph *periph) { struct da_softc *softc = (struct da_softc *)periph->softc; if (softc->state != DA_STATE_NORMAL) return; cam_iosched_schedule(softc->cam_iosched, periph); } /* * Actually translate the requested transfer into one the physical driver * can understand. The transfer is described by a buf and will include * only one physical transfer. */ static void dastrategy(struct bio *bp) { struct cam_periph *periph; struct da_softc *softc; periph = (struct cam_periph *)bp->bio_disk->d_drv1; softc = (struct da_softc *)periph->softc; cam_periph_lock(periph); /* * If the device has been made invalid, error out */ if ((softc->flags & DA_FLAG_PACK_INVALID)) { cam_periph_unlock(periph); biofinish(bp, NULL, ENXIO); return; } CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dastrategy(%p)\n", bp)); /* * Zone commands must be ordered, because they can depend on the * effects of previously issued commands, and they may affect * commands after them. */ if (bp->bio_cmd == BIO_ZONE) bp->bio_flags |= BIO_ORDERED; /* * Place it in the queue of disk activities for this disk */ cam_iosched_queue_work(softc->cam_iosched, bp); /* * Schedule ourselves for performing the work. */ daschedule(periph); cam_periph_unlock(periph); return; } static int dadump(void *arg, void *virtual, vm_offset_t physical, off_t offset, size_t length) { struct cam_periph *periph; struct da_softc *softc; u_int secsize; struct ccb_scsiio csio; struct disk *dp; int error = 0; dp = arg; periph = dp->d_drv1; softc = (struct da_softc *)periph->softc; secsize = softc->params.secsize; if ((softc->flags & DA_FLAG_PACK_INVALID) != 0) return (ENXIO); memset(&csio, 0, sizeof(csio)); if (length > 0) { xpt_setup_ccb(&csio.ccb_h, periph->path, CAM_PRIORITY_NORMAL); csio.ccb_h.ccb_state = DA_CCB_DUMP; scsi_read_write(&csio, /*retries*/0, /*cbfcnp*/NULL, MSG_ORDERED_Q_TAG, /*read*/SCSI_RW_WRITE, /*byte2*/0, /*minimum_cmd_size*/ softc->minimum_cmd_size, offset / secsize, length / secsize, /*data_ptr*/(u_int8_t *) virtual, /*dxfer_len*/length, /*sense_len*/SSD_FULL_SIZE, da_default_timeout * 1000); error = cam_periph_runccb((union ccb *)&csio, cam_periph_error, 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL); if (error != 0) printf("Aborting dump due to I/O error.\n"); return (error); } /* * Sync the disk cache contents to the physical media. */ if ((softc->quirks & DA_Q_NO_SYNC_CACHE) == 0) { xpt_setup_ccb(&csio.ccb_h, periph->path, CAM_PRIORITY_NORMAL); csio.ccb_h.ccb_state = DA_CCB_DUMP; scsi_synchronize_cache(&csio, /*retries*/0, /*cbfcnp*/NULL, MSG_SIMPLE_Q_TAG, /*begin_lba*/0,/* Cover the whole disk */ /*lb_count*/0, SSD_FULL_SIZE, 5 * 1000); error = cam_periph_runccb((union ccb *)&csio, cam_periph_error, 0, SF_NO_RECOVERY | SF_NO_RETRY, NULL); if (error != 0) xpt_print(periph->path, "Synchronize cache failed\n"); } return (error); } static int dagetattr(struct bio *bp) { int ret; struct cam_periph *periph; if (g_handleattr_int(bp, "GEOM::canspeedup", da_enable_biospeedup)) return (EJUSTRETURN); periph = (struct cam_periph *)bp->bio_disk->d_drv1; cam_periph_lock(periph); ret = xpt_getattr(bp->bio_data, bp->bio_length, bp->bio_attribute, periph->path); cam_periph_unlock(periph); if (ret == 0) bp->bio_completed = bp->bio_length; return ret; } static void dainit(void) { cam_status status; /* * Install a global async callback. This callback will * receive async callbacks like "new device found". */ status = xpt_register_async(AC_FOUND_DEVICE, daasync, NULL, NULL); if (status != CAM_REQ_CMP) { printf("da: Failed to attach master async callback " "due to status 0x%x!\n", status); } else if (da_send_ordered) { /* Register our shutdown event handler */ if ((EVENTHANDLER_REGISTER(shutdown_post_sync, dashutdown, NULL, SHUTDOWN_PRI_DEFAULT)) == NULL) printf("dainit: shutdown event registration failed!\n"); } + + da_ccb_zone = uma_zcreate("da_ccb", + sizeof(struct ccb_scsiio), NULL, NULL, NULL, NULL, + UMA_ALIGN_PTR, 0); } /* * Callback from GEOM, called when it has finished cleaning up its * resources. */ static void dadiskgonecb(struct disk *dp) { struct cam_periph *periph; periph = (struct cam_periph *)dp->d_drv1; da_periph_release(periph, DA_REF_GEOM); } static void daoninvalidate(struct cam_periph *periph) { struct da_softc *softc; cam_periph_assert(periph, MA_OWNED); softc = (struct da_softc *)periph->softc; /* * De-register any async callbacks. */ xpt_register_async(0, daasync, periph, periph->path); softc->flags |= DA_FLAG_PACK_INVALID; #ifdef CAM_IO_STATS softc->invalidations++; #endif /* * Return all queued I/O with ENXIO. * XXX Handle any transactions queued to the card * with XPT_ABORT_CCB. */ cam_iosched_flush(softc->cam_iosched, NULL, ENXIO); /* * Tell GEOM that we've gone away, we'll get a callback when it is * done cleaning up its resources. */ disk_gone(softc->disk); } static void dacleanup(struct cam_periph *periph) { struct da_softc *softc; softc = (struct da_softc *)periph->softc; cam_periph_unlock(periph); cam_iosched_fini(softc->cam_iosched); /* * If we can't free the sysctl tree, oh well... */ if ((softc->flags & DA_FLAG_SCTX_INIT) != 0) { #ifdef CAM_IO_STATS if (sysctl_ctx_free(&softc->sysctl_stats_ctx) != 0) xpt_print(periph->path, "can't remove sysctl stats context\n"); #endif if (sysctl_ctx_free(&softc->sysctl_ctx) != 0) xpt_print(periph->path, "can't remove sysctl context\n"); } callout_drain(&softc->mediapoll_c); disk_destroy(softc->disk); callout_drain(&softc->sendordered_c); free(softc, M_DEVBUF); cam_periph_lock(periph); } static void daasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg) { struct cam_periph *periph; struct da_softc *softc; periph = (struct cam_periph *)callback_arg; switch (code) { case AC_FOUND_DEVICE: /* callback to create periph, no locking yet */ { struct ccb_getdev *cgd; cam_status status; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) break; if (cgd->protocol != PROTO_SCSI) break; if (SID_QUAL(&cgd->inq_data) != SID_QUAL_LU_CONNECTED) break; if (SID_TYPE(&cgd->inq_data) != T_DIRECT && SID_TYPE(&cgd->inq_data) != T_RBC && SID_TYPE(&cgd->inq_data) != T_OPTICAL && SID_TYPE(&cgd->inq_data) != T_ZBC_HM) break; /* * Allocate a peripheral instance for * this device and start the probe * process. */ status = cam_periph_alloc(daregister, daoninvalidate, dacleanup, dastart, "da", CAM_PERIPH_BIO, path, daasync, AC_FOUND_DEVICE, cgd); if (status != CAM_REQ_CMP && status != CAM_REQ_INPROG) printf("daasync: Unable to attach to new device " "due to status 0x%x\n", status); return; } case AC_ADVINFO_CHANGED: /* Doesn't touch periph */ { uintptr_t buftype; buftype = (uintptr_t)arg; if (buftype == CDAI_TYPE_PHYS_PATH) { struct da_softc *softc; softc = periph->softc; disk_attr_changed(softc->disk, "GEOM::physpath", M_NOWAIT); } break; } case AC_UNIT_ATTENTION: { union ccb *ccb; int error_code, sense_key, asc, ascq; softc = (struct da_softc *)periph->softc; ccb = (union ccb *)arg; /* * Handle all UNIT ATTENTIONs except our own, as they will be * handled by daerror(). Since this comes from a different periph, * that periph's lock is held, not ours, so we have to take it ours * out to touch softc flags. */ if (xpt_path_periph(ccb->ccb_h.path) != periph && scsi_extract_sense_ccb(ccb, &error_code, &sense_key, &asc, &ascq)) { if (asc == 0x2A && ascq == 0x09) { xpt_print(ccb->ccb_h.path, "Capacity data has changed\n"); cam_periph_lock(periph); softc->flags &= ~DA_FLAG_PROBED; dareprobe(periph); cam_periph_unlock(periph); } else if (asc == 0x28 && ascq == 0x00) { cam_periph_lock(periph); softc->flags &= ~DA_FLAG_PROBED; cam_periph_unlock(periph); disk_media_changed(softc->disk, M_NOWAIT); } else if (asc == 0x3F && ascq == 0x03) { xpt_print(ccb->ccb_h.path, "INQUIRY data has changed\n"); cam_periph_lock(periph); softc->flags &= ~DA_FLAG_PROBED; dareprobe(periph); cam_periph_unlock(periph); } } break; } case AC_SCSI_AEN: /* Called for this path: periph locked */ /* * Appears to be currently unused for SCSI devices, only ata SIMs * generate this. */ cam_periph_assert(periph, MA_OWNED); softc = (struct da_softc *)periph->softc; if (!cam_iosched_has_work_flags(softc->cam_iosched, DA_WORK_TUR) && (softc->flags & DA_FLAG_TUR_PENDING) == 0) { if (da_periph_acquire(periph, DA_REF_TUR) == 0) { cam_iosched_set_work_flags(softc->cam_iosched, DA_WORK_TUR); daschedule(periph); } } /* FALLTHROUGH */ case AC_SENT_BDR: /* Called for this path: periph locked */ case AC_BUS_RESET: /* Called for this path: periph locked */ { struct ccb_hdr *ccbh; cam_periph_assert(periph, MA_OWNED); softc = (struct da_softc *)periph->softc; /* * Don't fail on the expected unit attention * that will occur. */ softc->flags |= DA_FLAG_RETRY_UA; LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le) ccbh->ccb_state |= DA_CCB_RETRY_UA; break; } case AC_INQ_CHANGED: /* Called for this path: periph locked */ cam_periph_assert(periph, MA_OWNED); softc = (struct da_softc *)periph->softc; softc->flags &= ~DA_FLAG_PROBED; dareprobe(periph); break; default: break; } cam_periph_async(periph, code, path, arg); } static void dasysctlinit(void *context, int pending) { struct cam_periph *periph; struct da_softc *softc; char tmpstr[32], tmpstr2[16]; struct ccb_trans_settings cts; periph = (struct cam_periph *)context; /* * periph was held for us when this task was enqueued */ if (periph->flags & CAM_PERIPH_INVALID) { da_periph_release(periph, DA_REF_SYSCTL); return; } softc = (struct da_softc *)periph->softc; snprintf(tmpstr, sizeof(tmpstr), "CAM DA unit %d", periph->unit_number); snprintf(tmpstr2, sizeof(tmpstr2), "%d", periph->unit_number); sysctl_ctx_init(&softc->sysctl_ctx); cam_periph_lock(periph); softc->flags |= DA_FLAG_SCTX_INIT; cam_periph_unlock(periph); softc->sysctl_tree = SYSCTL_ADD_NODE_WITH_LABEL(&softc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_kern_cam_da), OID_AUTO, tmpstr2, CTLFLAG_RD | CTLFLAG_MPSAFE, 0, tmpstr, "device_index"); if (softc->sysctl_tree == NULL) { printf("dasysctlinit: unable to allocate sysctl tree\n"); da_periph_release(periph, DA_REF_SYSCTL); return; } /* * Now register the sysctl handler, so the user can change the value on * the fly. */ SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "delete_method", CTLTYPE_STRING | CTLFLAG_RWTUN | CTLFLAG_NEEDGIANT, softc, 0, dadeletemethodsysctl, "A", "BIO_DELETE execution method"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "delete_max", CTLTYPE_U64 | CTLFLAG_RW | CTLFLAG_NEEDGIANT, softc, 0, dadeletemaxsysctl, "Q", "Maximum BIO_DELETE size"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "minimum_cmd_size", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, &softc->minimum_cmd_size, 0, dacmdsizesysctl, "I", "Minimum CDB size"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "trim_count", CTLFLAG_RD, &softc->trim_count, "Total number of unmap/dsm commands sent"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "trim_ranges", CTLFLAG_RD, &softc->trim_ranges, "Total number of ranges in unmap/dsm commands"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "trim_lbas", CTLFLAG_RD, &softc->trim_lbas, "Total lbas in the unmap/dsm commands sent"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "zone_mode", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, softc, 0, dazonemodesysctl, "A", "Zone Mode"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "zone_support", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_NEEDGIANT, softc, 0, dazonesupsysctl, "A", "Zone Support"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "optimal_seq_zones", CTLFLAG_RD, &softc->optimal_seq_zones, "Optimal Number of Open Sequential Write Preferred Zones"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "optimal_nonseq_zones", CTLFLAG_RD, &softc->optimal_nonseq_zones, "Optimal Number of Non-Sequentially Written Sequential Write " "Preferred Zones"); SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "max_seq_zones", CTLFLAG_RD, &softc->max_seq_zones, "Maximum Number of Open Sequential Write Required Zones"); SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "error_inject", CTLFLAG_RW, &softc->error_inject, 0, "error_inject leaf"); SYSCTL_ADD_INT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "p_type", CTLFLAG_RD, &softc->p_type, 0, "DIF protection type"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "flags", CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, softc, 0, daflagssysctl, "A", "Flags for drive"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "rotating", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->flags, (u_int)DA_FLAG_ROTATING, dabitsysctl, "I", "Rotating media *DEPRECATED* gone in FreeBSD 14"); SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "unmapped_io", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, &softc->flags, (u_int)DA_FLAG_UNMAPPEDIO, dabitsysctl, "I", "Unmapped I/O support *DEPRECATED* gone in FreeBSD 14"); #ifdef CAM_TEST_FAILURE SYSCTL_ADD_PROC(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "invalidate", CTLTYPE_U64 | CTLFLAG_RW | CTLFLAG_MPSAFE, periph, 0, cam_periph_invalidate_sysctl, "I", "Write 1 to invalidate the drive immediately"); #endif /* * Add some addressing info. */ memset(&cts, 0, sizeof (cts)); xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cam_periph_lock(periph); xpt_action((union ccb *)&cts); cam_periph_unlock(periph); if (cts.ccb_h.status != CAM_REQ_CMP) { da_periph_release(periph, DA_REF_SYSCTL); return; } if (cts.protocol == PROTO_SCSI && cts.transport == XPORT_FC) { struct ccb_trans_settings_fc *fc = &cts.xport_specific.fc; if (fc->valid & CTS_FC_VALID_WWPN) { softc->wwpn = fc->wwpn; SYSCTL_ADD_UQUAD(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "wwpn", CTLFLAG_RD, &softc->wwpn, "World Wide Port Name"); } } #ifdef CAM_IO_STATS /* * Now add some useful stats. * XXX These should live in cam_periph and be common to all periphs */ softc->sysctl_stats_tree = SYSCTL_ADD_NODE(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_tree), OID_AUTO, "stats", CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "Statistics"); SYSCTL_ADD_INT(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_stats_tree), OID_AUTO, "errors", CTLFLAG_RD, &softc->errors, 0, "Transport errors reported by the SIM"); SYSCTL_ADD_INT(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_stats_tree), OID_AUTO, "timeouts", CTLFLAG_RD, &softc->timeouts, 0, "Device timeouts reported by the SIM"); SYSCTL_ADD_INT(&softc->sysctl_stats_ctx, SYSCTL_CHILDREN(softc->sysctl_stats_tree), OID_AUTO, "pack_invalidations", CTLFLAG_RD, &softc->invalidations, 0, "Device pack invalidations"); #endif cam_iosched_sysctl_init(softc->cam_iosched, &softc->sysctl_ctx, softc->sysctl_tree); da_periph_release(periph, DA_REF_SYSCTL); } static int dadeletemaxsysctl(SYSCTL_HANDLER_ARGS) { int error; uint64_t value; struct da_softc *softc; softc = (struct da_softc *)arg1; value = softc->disk->d_delmaxsize; error = sysctl_handle_64(oidp, &value, 0, req); if ((error != 0) || (req->newptr == NULL)) return (error); /* only accept values smaller than the calculated value */ if (value > dadeletemaxsize(softc, softc->delete_method)) { return (EINVAL); } softc->disk->d_delmaxsize = value; return (0); } static int dacmdsizesysctl(SYSCTL_HANDLER_ARGS) { int error, value; value = *(int *)arg1; error = sysctl_handle_int(oidp, &value, 0, req); if ((error != 0) || (req->newptr == NULL)) return (error); /* * Acceptable values here are 6, 10, 12 or 16. */ if (value < 6) value = 6; else if ((value > 6) && (value <= 10)) value = 10; else if ((value > 10) && (value <= 12)) value = 12; else if (value > 12) value = 16; *(int *)arg1 = value; return (0); } static int dasysctlsofttimeout(SYSCTL_HANDLER_ARGS) { sbintime_t value; int error; value = da_default_softtimeout / SBT_1MS; error = sysctl_handle_int(oidp, (int *)&value, 0, req); if ((error != 0) || (req->newptr == NULL)) return (error); /* XXX Should clip this to a reasonable level */ if (value > da_default_timeout * 1000) return (EINVAL); da_default_softtimeout = value * SBT_1MS; return (0); } static void dadeletemethodset(struct da_softc *softc, da_delete_methods delete_method) { softc->delete_method = delete_method; softc->disk->d_delmaxsize = dadeletemaxsize(softc, delete_method); softc->delete_func = da_delete_functions[delete_method]; if (softc->delete_method > DA_DELETE_DISABLE) softc->disk->d_flags |= DISKFLAG_CANDELETE; else softc->disk->d_flags &= ~DISKFLAG_CANDELETE; } static off_t dadeletemaxsize(struct da_softc *softc, da_delete_methods delete_method) { off_t sectors; switch(delete_method) { case DA_DELETE_UNMAP: sectors = (off_t)softc->unmap_max_lba; break; case DA_DELETE_ATA_TRIM: sectors = (off_t)ATA_DSM_RANGE_MAX * softc->trim_max_ranges; break; case DA_DELETE_WS16: sectors = omin(softc->ws_max_blks, WS16_MAX_BLKS); break; case DA_DELETE_ZERO: case DA_DELETE_WS10: sectors = omin(softc->ws_max_blks, WS10_MAX_BLKS); break; default: return 0; } return (off_t)softc->params.secsize * omin(sectors, softc->params.sectors); } static void daprobedone(struct cam_periph *periph, union ccb *ccb) { struct da_softc *softc; softc = (struct da_softc *)periph->softc; cam_periph_assert(periph, MA_OWNED); dadeletemethodchoose(softc, DA_DELETE_NONE); if (bootverbose && (softc->flags & DA_FLAG_ANNOUNCED) == 0) { char buf[80]; int i, sep; snprintf(buf, sizeof(buf), "Delete methods: <"); sep = 0; for (i = 0; i <= DA_DELETE_MAX; i++) { if ((softc->delete_available & (1 << i)) == 0 && i != softc->delete_method) continue; if (sep) strlcat(buf, ",", sizeof(buf)); strlcat(buf, da_delete_method_names[i], sizeof(buf)); if (i == softc->delete_method) strlcat(buf, "(*)", sizeof(buf)); sep = 1; } strlcat(buf, ">", sizeof(buf)); printf("%s%d: %s\n", periph->periph_name, periph->unit_number, buf); } if ((softc->disk->d_flags & DISKFLAG_WRITE_PROTECT) != 0 && (softc->flags & DA_FLAG_ANNOUNCED) == 0) { printf("%s%d: Write Protected\n", periph->periph_name, periph->unit_number); } /* * Since our peripheral may be invalidated by an error * above or an external event, we must release our CCB * before releasing the probe lock on the peripheral. * The peripheral will only go away once the last lock * is removed, and we need it around for the CCB release * operation. */ xpt_release_ccb(ccb); softc->state = DA_STATE_NORMAL; softc->flags |= DA_FLAG_PROBED; daschedule(periph); wakeup(&softc->disk->d_mediasize); if ((softc->flags & DA_FLAG_ANNOUNCED) == 0) { softc->flags |= DA_FLAG_ANNOUNCED; da_periph_unhold(periph, DA_REF_PROBE_HOLD); } else da_periph_release_locked(periph, DA_REF_REPROBE); } static void dadeletemethodchoose(struct da_softc *softc, da_delete_methods default_method) { int i, methods; /* If available, prefer the method requested by user. */ i = softc->delete_method_pref; methods = softc->delete_available | (1 << DA_DELETE_DISABLE); if (methods & (1 << i)) { dadeletemethodset(softc, i); return; } /* Use the pre-defined order to choose the best performing delete. */ for (i = DA_DELETE_MIN; i <= DA_DELETE_MAX; i++) { if (i == DA_DELETE_ZERO) continue; if (softc->delete_available & (1 << i)) { dadeletemethodset(softc, i); return; } } /* Fallback to default. */ dadeletemethodset(softc, default_method); } static int dabitsysctl(SYSCTL_HANDLER_ARGS) { u_int *flags = arg1; u_int test = arg2; int tmpout, error; tmpout = !!(*flags & test); error = SYSCTL_OUT(req, &tmpout, sizeof(tmpout)); if (error || !req->newptr) return (error); return (EPERM); } static int daflagssysctl(SYSCTL_HANDLER_ARGS) { struct sbuf sbuf; struct da_softc *softc = arg1; int error; sbuf_new_for_sysctl(&sbuf, NULL, 0, req); if (softc->flags != 0) sbuf_printf(&sbuf, "0x%b", (unsigned)softc->flags, DA_FLAG_STRING); else sbuf_printf(&sbuf, "0"); error = sbuf_finish(&sbuf); sbuf_delete(&sbuf); return (error); } static int dadeletemethodsysctl(SYSCTL_HANDLER_ARGS) { char buf[16]; const char *p; struct da_softc *softc; int i, error, value; softc = (struct da_softc *)arg1; value = softc->delete_method; if (value < 0 || value > DA_DELETE_MAX) p = "UNKNOWN"; else p = da_delete_method_names[value]; strncpy(buf, p, sizeof(buf)); error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); for (i = 0; i <= DA_DELETE_MAX; i++) { if (strcmp(buf, da_delete_method_names[i]) == 0) break; } if (i > DA_DELETE_MAX) return (EINVAL); softc->delete_method_pref = i; dadeletemethodchoose(softc, DA_DELETE_NONE); return (0); } static int dazonemodesysctl(SYSCTL_HANDLER_ARGS) { char tmpbuf[40]; struct da_softc *softc; int error; softc = (struct da_softc *)arg1; switch (softc->zone_mode) { case DA_ZONE_DRIVE_MANAGED: snprintf(tmpbuf, sizeof(tmpbuf), "Drive Managed"); break; case DA_ZONE_HOST_AWARE: snprintf(tmpbuf, sizeof(tmpbuf), "Host Aware"); break; case DA_ZONE_HOST_MANAGED: snprintf(tmpbuf, sizeof(tmpbuf), "Host Managed"); break; case DA_ZONE_NONE: default: snprintf(tmpbuf, sizeof(tmpbuf), "Not Zoned"); break; } error = sysctl_handle_string(oidp, tmpbuf, sizeof(tmpbuf), req); return (error); } static int dazonesupsysctl(SYSCTL_HANDLER_ARGS) { char tmpbuf[180]; struct da_softc *softc; struct sbuf sb; int error, first; unsigned int i; softc = (struct da_softc *)arg1; error = 0; first = 1; sbuf_new(&sb, tmpbuf, sizeof(tmpbuf), 0); for (i = 0; i < sizeof(da_zone_desc_table) / sizeof(da_zone_desc_table[0]); i++) { if (softc->zone_flags & da_zone_desc_table[i].value) { if (first == 0) sbuf_printf(&sb, ", "); else first = 0; sbuf_cat(&sb, da_zone_desc_table[i].desc); } } if (first == 1) sbuf_printf(&sb, "None"); sbuf_finish(&sb); error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req); return (error); } static cam_status daregister(struct cam_periph *periph, void *arg) { struct da_softc *softc; struct ccb_pathinq cpi; struct ccb_getdev *cgd; char tmpstr[80]; caddr_t match; int quirks; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) { printf("daregister: no getdev CCB, can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (struct da_softc *)malloc(sizeof(*softc), M_DEVBUF, M_NOWAIT|M_ZERO); if (softc == NULL) { printf("daregister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } if (cam_iosched_init(&softc->cam_iosched, periph) != 0) { printf("daregister: Unable to probe new device. " "Unable to allocate iosched memory\n"); free(softc, M_DEVBUF); return(CAM_REQ_CMP_ERR); } LIST_INIT(&softc->pending_ccbs); softc->state = DA_STATE_PROBE_WP; bioq_init(&softc->delete_run_queue); if (SID_IS_REMOVABLE(&cgd->inq_data)) softc->flags |= DA_FLAG_PACK_REMOVABLE; softc->unmap_max_ranges = UNMAP_MAX_RANGES; softc->unmap_max_lba = UNMAP_RANGE_MAX; softc->unmap_gran = 0; softc->unmap_gran_align = 0; softc->ws_max_blks = WS16_MAX_BLKS; softc->trim_max_ranges = ATA_TRIM_MAX_RANGES; softc->flags |= DA_FLAG_ROTATING; periph->softc = softc; /* * See if this device has any quirks. */ match = cam_quirkmatch((caddr_t)&cgd->inq_data, (caddr_t)da_quirk_table, nitems(da_quirk_table), sizeof(*da_quirk_table), scsi_inquiry_match); if (match != NULL) softc->quirks = ((struct da_quirk_entry *)match)->quirks; else softc->quirks = DA_Q_NONE; /* Check if the SIM does not want 6 byte commands */ xpt_path_inq(&cpi, periph->path); if (cpi.ccb_h.status == CAM_REQ_CMP && (cpi.hba_misc & PIM_NO_6_BYTE)) softc->quirks |= DA_Q_NO_6_BYTE; /* Override quirks if tunable is set */ snprintf(tmpstr, sizeof(tmpstr), "kern.cam.da.%d.quirks", periph->unit_number); quirks = softc->quirks; TUNABLE_INT_FETCH(tmpstr, &quirks); softc->quirks = quirks; if (SID_TYPE(&cgd->inq_data) == T_ZBC_HM) softc->zone_mode = DA_ZONE_HOST_MANAGED; else if (softc->quirks & DA_Q_SMR_DM) softc->zone_mode = DA_ZONE_DRIVE_MANAGED; else softc->zone_mode = DA_ZONE_NONE; if (softc->zone_mode != DA_ZONE_NONE) { if (scsi_vpd_supported_page(periph, SVPD_ATA_INFORMATION)) { if (scsi_vpd_supported_page(periph, SVPD_ZONED_BDC)) softc->zone_interface = DA_ZONE_IF_ATA_SAT; else softc->zone_interface = DA_ZONE_IF_ATA_PASS; } else softc->zone_interface = DA_ZONE_IF_SCSI; } TASK_INIT(&softc->sysctl_task, 0, dasysctlinit, periph); + /* + * Let XPT know we can use UMA-allocated CCBs. + */ + if (da_enable_uma_ccbs) { + KASSERT(da_ccb_zone != NULL, + ("%s: NULL da_ccb_zone", __func__)); + periph->ccb_zone = da_ccb_zone; + } + /* * Take an exclusive section lock on the periph while dastart is called * to finish the probe. The lock will be dropped in dadone at the end * of probe. This locks out daopen and daclose from racing with the * probe. * * XXX if cam_periph_hold returns an error, we don't hold a refcount. */ (void)da_periph_hold(periph, PRIBIO, DA_REF_PROBE_HOLD); /* * Schedule a periodic event to occasionally send an * ordered tag to a device. */ callout_init_mtx(&softc->sendordered_c, cam_periph_mtx(periph), 0); callout_reset(&softc->sendordered_c, (da_default_timeout * hz) / DA_ORDEREDTAG_INTERVAL, dasendorderedtag, periph); cam_periph_unlock(periph); /* * RBC devices don't have to support READ(6), only READ(10). */ if (softc->quirks & DA_Q_NO_6_BYTE || SID_TYPE(&cgd->inq_data) == T_RBC) softc->minimum_cmd_size = 10; else softc->minimum_cmd_size = 6; /* * Load the user's default, if any. */ snprintf(tmpstr, sizeof(tmpstr), "kern.cam.da.%d.minimum_cmd_size", periph->unit_number); TUNABLE_INT_FETCH(tmpstr, &softc->minimum_cmd_size); /* * 6, 10, 12 and 16 are the currently permissible values. */ if (softc->minimum_cmd_size > 12) softc->minimum_cmd_size = 16; else if (softc->minimum_cmd_size > 10) softc->minimum_cmd_size = 12; else if (softc->minimum_cmd_size > 6) softc->minimum_cmd_size = 10; else softc->minimum_cmd_size = 6; /* Predict whether device may support READ CAPACITY(16). */ if (SID_ANSI_REV(&cgd->inq_data) >= SCSI_REV_SPC3 && (softc->quirks & DA_Q_NO_RC16) == 0) { softc->flags |= DA_FLAG_CAN_RC16; } /* * Register this media as a disk. */ softc->disk = disk_alloc(); softc->disk->d_devstat = devstat_new_entry(periph->periph_name, periph->unit_number, 0, DEVSTAT_BS_UNAVAILABLE, SID_TYPE(&cgd->inq_data) | XPORT_DEVSTAT_TYPE(cpi.transport), DEVSTAT_PRIORITY_DISK); softc->disk->d_open = daopen; softc->disk->d_close = daclose; softc->disk->d_strategy = dastrategy; if (cam_sim_pollable(periph->sim)) softc->disk->d_dump = dadump; softc->disk->d_getattr = dagetattr; softc->disk->d_gone = dadiskgonecb; softc->disk->d_name = "da"; softc->disk->d_drv1 = periph; if (cpi.maxio == 0) softc->maxio = DFLTPHYS; /* traditional default */ else if (cpi.maxio > maxphys) softc->maxio = maxphys; /* for safety */ else softc->maxio = cpi.maxio; if (softc->quirks & DA_Q_128KB) softc->maxio = min(softc->maxio, 128 * 1024); softc->disk->d_maxsize = softc->maxio; softc->disk->d_unit = periph->unit_number; softc->disk->d_flags = DISKFLAG_DIRECT_COMPLETION | DISKFLAG_CANZONE; if ((softc->quirks & DA_Q_NO_SYNC_CACHE) == 0) softc->disk->d_flags |= DISKFLAG_CANFLUSHCACHE; if ((cpi.hba_misc & PIM_UNMAPPED) != 0) { softc->flags |= DA_FLAG_UNMAPPEDIO; softc->disk->d_flags |= DISKFLAG_UNMAPPED_BIO; } cam_strvis(softc->disk->d_descr, cgd->inq_data.vendor, sizeof(cgd->inq_data.vendor), sizeof(softc->disk->d_descr)); strlcat(softc->disk->d_descr, " ", sizeof(softc->disk->d_descr)); cam_strvis(&softc->disk->d_descr[strlen(softc->disk->d_descr)], cgd->inq_data.product, sizeof(cgd->inq_data.product), sizeof(softc->disk->d_descr) - strlen(softc->disk->d_descr)); softc->disk->d_hba_vendor = cpi.hba_vendor; softc->disk->d_hba_device = cpi.hba_device; softc->disk->d_hba_subvendor = cpi.hba_subvendor; softc->disk->d_hba_subdevice = cpi.hba_subdevice; snprintf(softc->disk->d_attachment, sizeof(softc->disk->d_attachment), "%s%d", cpi.dev_name, cpi.unit_number); /* * Acquire a reference to the periph before we register with GEOM. * We'll release this reference once GEOM calls us back (via * dadiskgonecb()) telling us that our provider has been freed. */ if (da_periph_acquire(periph, DA_REF_GEOM) != 0) { xpt_print(periph->path, "%s: lost periph during " "registration!\n", __func__); cam_periph_lock(periph); return (CAM_REQ_CMP_ERR); } disk_create(softc->disk, DISK_VERSION); cam_periph_lock(periph); /* * Add async callbacks for events of interest. * I don't bother checking if this fails as, * in most cases, the system will function just * fine without them and the only alternative * would be to not attach the device on failure. */ xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE | AC_ADVINFO_CHANGED | AC_SCSI_AEN | AC_UNIT_ATTENTION | AC_INQ_CHANGED, daasync, periph, periph->path); /* * Emit an attribute changed notification just in case * physical path information arrived before our async * event handler was registered, but after anyone attaching * to our disk device polled it. */ disk_attr_changed(softc->disk, "GEOM::physpath", M_NOWAIT); /* * Schedule a periodic media polling events. */ callout_init_mtx(&softc->mediapoll_c, cam_periph_mtx(periph), 0); if ((softc->flags & DA_FLAG_PACK_REMOVABLE) && (cgd->inq_flags & SID_AEN) == 0 && da_poll_period != 0) callout_reset(&softc->mediapoll_c, da_poll_period * hz, damediapoll, periph); xpt_schedule(periph, CAM_PRIORITY_DEV); return(CAM_REQ_CMP); } static int da_zone_bio_to_scsi(int disk_zone_cmd) { switch (disk_zone_cmd) { case DISK_ZONE_OPEN: return ZBC_OUT_SA_OPEN; case DISK_ZONE_CLOSE: return ZBC_OUT_SA_CLOSE; case DISK_ZONE_FINISH: return ZBC_OUT_SA_FINISH; case DISK_ZONE_RWP: return ZBC_OUT_SA_RWP; } return -1; } static int da_zone_cmd(struct cam_periph *periph, union ccb *ccb, struct bio *bp, int *queue_ccb) { struct da_softc *softc; int error; error = 0; if (bp->bio_cmd != BIO_ZONE) { error = EINVAL; goto bailout; } softc = periph->softc; switch (bp->bio_zone.zone_cmd) { case DISK_ZONE_OPEN: case DISK_ZONE_CLOSE: case DISK_ZONE_FINISH: case DISK_ZONE_RWP: { int zone_flags; int zone_sa; uint64_t lba; zone_sa = da_zone_bio_to_scsi(bp->bio_zone.zone_cmd); if (zone_sa == -1) { xpt_print(periph->path, "Cannot translate zone " "cmd %#x to SCSI\n", bp->bio_zone.zone_cmd); error = EINVAL; goto bailout; } zone_flags = 0; lba = bp->bio_zone.zone_params.rwp.id; if (bp->bio_zone.zone_params.rwp.flags & DISK_ZONE_RWP_FLAG_ALL) zone_flags |= ZBC_OUT_ALL; if (softc->zone_interface != DA_ZONE_IF_ATA_PASS) { scsi_zbc_out(&ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*service_action*/ zone_sa, /*zone_id*/ lba, /*zone_flags*/ zone_flags, /*data_ptr*/ NULL, /*dxfer_len*/ 0, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); } else { /* * Note that in this case, even though we can * technically use NCQ, we don't bother for several * reasons: * 1. It hasn't been tested on a SAT layer that * supports it. This is new as of SAT-4. * 2. Even when there is a SAT layer that supports * it, that SAT layer will also probably support * ZBC -> ZAC translation, since they are both * in the SAT-4 spec. * 3. Translation will likely be preferable to ATA * passthrough. LSI / Avago at least single * steps ATA passthrough commands in the HBA, * regardless of protocol, so unless that * changes, there is a performance penalty for * doing ATA passthrough no matter whether * you're using NCQ/FPDMA, DMA or PIO. * 4. It requires a 32-byte CDB, which at least at * this point in CAM requires a CDB pointer, which * would require us to allocate an additional bit * of storage separate from the CCB. */ error = scsi_ata_zac_mgmt_out(&ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*use_ncq*/ 0, /*zm_action*/ zone_sa, /*zone_id*/ lba, /*zone_flags*/ zone_flags, /*data_ptr*/ NULL, /*dxfer_len*/ 0, /*cdb_storage*/ NULL, /*cdb_storage_len*/ 0, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); if (error != 0) { error = EINVAL; xpt_print(periph->path, "scsi_ata_zac_mgmt_out() returned an " "error!"); goto bailout; } } *queue_ccb = 1; break; } case DISK_ZONE_REPORT_ZONES: { uint8_t *rz_ptr; uint32_t num_entries, alloc_size; struct disk_zone_report *rep; rep = &bp->bio_zone.zone_params.report; num_entries = rep->entries_allocated; if (num_entries == 0) { xpt_print(periph->path, "No entries allocated for " "Report Zones request\n"); error = EINVAL; goto bailout; } alloc_size = sizeof(struct scsi_report_zones_hdr) + (sizeof(struct scsi_report_zones_desc) * num_entries); alloc_size = min(alloc_size, softc->disk->d_maxsize); rz_ptr = malloc(alloc_size, M_SCSIDA, M_NOWAIT | M_ZERO); if (rz_ptr == NULL) { xpt_print(periph->path, "Unable to allocate memory " "for Report Zones request\n"); error = ENOMEM; goto bailout; } if (softc->zone_interface != DA_ZONE_IF_ATA_PASS) { scsi_zbc_in(&ccb->csio, /*retries*/ da_retry_count, /*cbcfnp*/ dadone, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*service_action*/ ZBC_IN_SA_REPORT_ZONES, /*zone_start_lba*/ rep->starting_id, /*zone_options*/ rep->rep_options, /*data_ptr*/ rz_ptr, /*dxfer_len*/ alloc_size, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); } else { /* * Note that in this case, even though we can * technically use NCQ, we don't bother for several * reasons: * 1. It hasn't been tested on a SAT layer that * supports it. This is new as of SAT-4. * 2. Even when there is a SAT layer that supports * it, that SAT layer will also probably support * ZBC -> ZAC translation, since they are both * in the SAT-4 spec. * 3. Translation will likely be preferable to ATA * passthrough. LSI / Avago at least single * steps ATA passthrough commands in the HBA, * regardless of protocol, so unless that * changes, there is a performance penalty for * doing ATA passthrough no matter whether * you're using NCQ/FPDMA, DMA or PIO. * 4. It requires a 32-byte CDB, which at least at * this point in CAM requires a CDB pointer, which * would require us to allocate an additional bit * of storage separate from the CCB. */ error = scsi_ata_zac_mgmt_in(&ccb->csio, /*retries*/ da_retry_count, /*cbcfnp*/ dadone, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*use_ncq*/ 0, /*zm_action*/ ATA_ZM_REPORT_ZONES, /*zone_id*/ rep->starting_id, /*zone_flags*/ rep->rep_options, /*data_ptr*/ rz_ptr, /*dxfer_len*/ alloc_size, /*cdb_storage*/ NULL, /*cdb_storage_len*/ 0, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); if (error != 0) { error = EINVAL; xpt_print(periph->path, "scsi_ata_zac_mgmt_in() returned an " "error!"); goto bailout; } } /* * For BIO_ZONE, this isn't normally needed. However, it * is used by devstat_end_transaction_bio() to determine * how much data was transferred. */ /* * XXX KDM we have a problem. But I'm not sure how to fix * it. devstat uses bio_bcount - bio_resid to calculate * the amount of data transferred. The GEOM disk code * uses bio_length - bio_resid to calculate the amount of * data in bio_completed. We have different structure * sizes above and below the ada(4) driver. So, if we * use the sizes above, the amount transferred won't be * quite accurate for devstat. If we use different sizes * for bio_bcount and bio_length (above and below * respectively), then the residual needs to match one or * the other. Everything is calculated after the bio * leaves the driver, so changing the values around isn't * really an option. For now, just set the count to the * passed in length. This means that the calculations * above (e.g. bio_completed) will be correct, but the * amount of data reported to devstat will be slightly * under or overstated. */ bp->bio_bcount = bp->bio_length; *queue_ccb = 1; break; } case DISK_ZONE_GET_PARAMS: { struct disk_zone_disk_params *params; params = &bp->bio_zone.zone_params.disk_params; bzero(params, sizeof(*params)); switch (softc->zone_mode) { case DA_ZONE_DRIVE_MANAGED: params->zone_mode = DISK_ZONE_MODE_DRIVE_MANAGED; break; case DA_ZONE_HOST_AWARE: params->zone_mode = DISK_ZONE_MODE_HOST_AWARE; break; case DA_ZONE_HOST_MANAGED: params->zone_mode = DISK_ZONE_MODE_HOST_MANAGED; break; default: case DA_ZONE_NONE: params->zone_mode = DISK_ZONE_MODE_NONE; break; } if (softc->zone_flags & DA_ZONE_FLAG_URSWRZ) params->flags |= DISK_ZONE_DISK_URSWRZ; if (softc->zone_flags & DA_ZONE_FLAG_OPT_SEQ_SET) { params->optimal_seq_zones = softc->optimal_seq_zones; params->flags |= DISK_ZONE_OPT_SEQ_SET; } if (softc->zone_flags & DA_ZONE_FLAG_OPT_NONSEQ_SET) { params->optimal_nonseq_zones = softc->optimal_nonseq_zones; params->flags |= DISK_ZONE_OPT_NONSEQ_SET; } if (softc->zone_flags & DA_ZONE_FLAG_MAX_SEQ_SET) { params->max_seq_zones = softc->max_seq_zones; params->flags |= DISK_ZONE_MAX_SEQ_SET; } if (softc->zone_flags & DA_ZONE_FLAG_RZ_SUP) params->flags |= DISK_ZONE_RZ_SUP; if (softc->zone_flags & DA_ZONE_FLAG_OPEN_SUP) params->flags |= DISK_ZONE_OPEN_SUP; if (softc->zone_flags & DA_ZONE_FLAG_CLOSE_SUP) params->flags |= DISK_ZONE_CLOSE_SUP; if (softc->zone_flags & DA_ZONE_FLAG_FINISH_SUP) params->flags |= DISK_ZONE_FINISH_SUP; if (softc->zone_flags & DA_ZONE_FLAG_RWP_SUP) params->flags |= DISK_ZONE_RWP_SUP; break; } default: break; } bailout: return (error); } static void dastart(struct cam_periph *periph, union ccb *start_ccb) { struct da_softc *softc; cam_periph_assert(periph, MA_OWNED); softc = (struct da_softc *)periph->softc; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dastart\n")); skipstate: switch (softc->state) { case DA_STATE_NORMAL: { struct bio *bp; uint8_t tag_code; more: bp = cam_iosched_next_bio(softc->cam_iosched); if (bp == NULL) { if (cam_iosched_has_work_flags(softc->cam_iosched, DA_WORK_TUR)) { softc->flags |= DA_FLAG_TUR_PENDING; cam_iosched_clr_work_flags(softc->cam_iosched, DA_WORK_TUR); scsi_test_unit_ready(&start_ccb->csio, /*retries*/ da_retry_count, dadone_tur, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_TUR; xpt_action(start_ccb); } else xpt_release_ccb(start_ccb); break; } if (bp->bio_cmd == BIO_DELETE) { if (softc->delete_func != NULL) { softc->delete_func(periph, start_ccb, bp); goto out; } else { /* * Not sure this is possible, but failsafe by * lying and saying "sure, done." */ biofinish(bp, NULL, 0); goto more; } } if (cam_iosched_has_work_flags(softc->cam_iosched, DA_WORK_TUR)) { cam_iosched_clr_work_flags(softc->cam_iosched, DA_WORK_TUR); da_periph_release_locked(periph, DA_REF_TUR); } if ((bp->bio_flags & BIO_ORDERED) != 0 || (softc->flags & DA_FLAG_NEED_OTAG) != 0) { softc->flags &= ~DA_FLAG_NEED_OTAG; softc->flags |= DA_FLAG_WAS_OTAG; tag_code = MSG_ORDERED_Q_TAG; } else { tag_code = MSG_SIMPLE_Q_TAG; } switch (bp->bio_cmd) { case BIO_WRITE: case BIO_READ: { void *data_ptr; int rw_op; biotrack(bp, __func__); if (bp->bio_cmd == BIO_WRITE) { softc->flags |= DA_FLAG_DIRTY; rw_op = SCSI_RW_WRITE; } else { rw_op = SCSI_RW_READ; } data_ptr = bp->bio_data; if ((bp->bio_flags & (BIO_UNMAPPED|BIO_VLIST)) != 0) { rw_op |= SCSI_RW_BIO; data_ptr = bp; } scsi_read_write(&start_ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone, /*tag_action*/tag_code, rw_op, /*byte2*/0, softc->minimum_cmd_size, /*lba*/bp->bio_pblkno, /*block_count*/bp->bio_bcount / softc->params.secsize, data_ptr, /*dxfer_len*/ bp->bio_bcount, /*sense_len*/SSD_FULL_SIZE, da_default_timeout * 1000); #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) start_ccb->csio.bio = bp; #endif break; } case BIO_FLUSH: /* * If we don't support sync cache, or the disk * isn't dirty, FLUSH is a no-op. Use the * allocated CCB for the next bio if one is * available. */ if ((softc->quirks & DA_Q_NO_SYNC_CACHE) != 0 || (softc->flags & DA_FLAG_DIRTY) == 0) { biodone(bp); goto skipstate; } /* * BIO_FLUSH doesn't currently communicate * range data, so we synchronize the cache * over the whole disk. */ scsi_synchronize_cache(&start_ccb->csio, /*retries*/1, /*cbfcnp*/dadone, /*tag_action*/tag_code, /*begin_lba*/0, /*lb_count*/0, SSD_FULL_SIZE, da_default_timeout*1000); /* * Clear the dirty flag before sending the command. * Either this sync cache will be successful, or it * will fail after a retry. If it fails, it is * unlikely to be successful if retried later, so * we'll save ourselves time by just marking the * device clean. */ softc->flags &= ~DA_FLAG_DIRTY; break; case BIO_ZONE: { int error, queue_ccb; queue_ccb = 0; error = da_zone_cmd(periph, start_ccb, bp,&queue_ccb); if ((error != 0) || (queue_ccb == 0)) { biofinish(bp, NULL, error); xpt_release_ccb(start_ccb); return; } break; } default: biofinish(bp, NULL, EOPNOTSUPP); xpt_release_ccb(start_ccb); return; } start_ccb->ccb_h.ccb_state = DA_CCB_BUFFER_IO; start_ccb->ccb_h.flags |= CAM_UNLOCKED; start_ccb->ccb_h.softtimeout = sbttotv(da_default_softtimeout); out: LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h, periph_links.le); /* We expect a unit attention from this device */ if ((softc->flags & DA_FLAG_RETRY_UA) != 0) { start_ccb->ccb_h.ccb_state |= DA_CCB_RETRY_UA; softc->flags &= ~DA_FLAG_RETRY_UA; } start_ccb->ccb_h.ccb_bp = bp; softc->refcount++; cam_periph_unlock(periph); xpt_action(start_ccb); cam_periph_lock(periph); /* May have more work to do, so ensure we stay scheduled */ daschedule(periph); break; } case DA_STATE_PROBE_WP: { void *mode_buf; int mode_buf_len; if (da_disable_wp_detection) { if ((softc->flags & DA_FLAG_CAN_RC16) != 0) softc->state = DA_STATE_PROBE_RC16; else softc->state = DA_STATE_PROBE_RC; goto skipstate; } mode_buf_len = 192; mode_buf = malloc(mode_buf_len, M_SCSIDA, M_NOWAIT); if (mode_buf == NULL) { xpt_print(periph->path, "Unable to send mode sense - " "malloc failure\n"); if ((softc->flags & DA_FLAG_CAN_RC16) != 0) softc->state = DA_STATE_PROBE_RC16; else softc->state = DA_STATE_PROBE_RC; goto skipstate; } scsi_mode_sense_len(&start_ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone_probewp, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*dbd*/ FALSE, /*pc*/ SMS_PAGE_CTRL_CURRENT, /*page*/ SMS_ALL_PAGES_PAGE, /*param_buf*/ mode_buf, /*param_len*/ mode_buf_len, /*minimum_cmd_size*/ softc->minimum_cmd_size, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_WP; xpt_action(start_ccb); break; } case DA_STATE_PROBE_RC: { struct scsi_read_capacity_data *rcap; rcap = (struct scsi_read_capacity_data *) malloc(sizeof(*rcap), M_SCSIDA, M_NOWAIT|M_ZERO); if (rcap == NULL) { printf("dastart: Couldn't malloc read_capacity data\n"); /* da_free_periph??? */ break; } scsi_read_capacity(&start_ccb->csio, /*retries*/da_retry_count, dadone_proberc, MSG_SIMPLE_Q_TAG, rcap, SSD_FULL_SIZE, /*timeout*/5000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_RC; xpt_action(start_ccb); break; } case DA_STATE_PROBE_RC16: { struct scsi_read_capacity_data_long *rcaplong; rcaplong = (struct scsi_read_capacity_data_long *) malloc(sizeof(*rcaplong), M_SCSIDA, M_NOWAIT|M_ZERO); if (rcaplong == NULL) { printf("dastart: Couldn't malloc read_capacity data\n"); /* da_free_periph??? */ break; } scsi_read_capacity_16(&start_ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone_proberc, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*lba*/ 0, /*reladr*/ 0, /*pmi*/ 0, /*rcap_buf*/ (uint8_t *)rcaplong, /*rcap_buf_len*/ sizeof(*rcaplong), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_RC16; xpt_action(start_ccb); break; } case DA_STATE_PROBE_LBP: { struct scsi_vpd_logical_block_prov *lbp; if (!scsi_vpd_supported_page(periph, SVPD_LBP)) { /* * If we get here we don't support any SBC-3 delete * methods with UNMAP as the Logical Block Provisioning * VPD page support is required for devices which * support it according to T10/1799-D Revision 31 * however older revisions of the spec don't mandate * this so we currently don't remove these methods * from the available set. */ softc->state = DA_STATE_PROBE_BLK_LIMITS; goto skipstate; } lbp = (struct scsi_vpd_logical_block_prov *) malloc(sizeof(*lbp), M_SCSIDA, M_NOWAIT|M_ZERO); if (lbp == NULL) { printf("dastart: Couldn't malloc lbp data\n"); /* da_free_periph??? */ break; } scsi_inquiry(&start_ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone_probelbp, /*tag_action*/MSG_SIMPLE_Q_TAG, /*inq_buf*/(u_int8_t *)lbp, /*inq_len*/sizeof(*lbp), /*evpd*/TRUE, /*page_code*/SVPD_LBP, /*sense_len*/SSD_MIN_SIZE, /*timeout*/da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_LBP; xpt_action(start_ccb); break; } case DA_STATE_PROBE_BLK_LIMITS: { struct scsi_vpd_block_limits *block_limits; if (!scsi_vpd_supported_page(periph, SVPD_BLOCK_LIMITS)) { /* Not supported skip to next probe */ softc->state = DA_STATE_PROBE_BDC; goto skipstate; } block_limits = (struct scsi_vpd_block_limits *) malloc(sizeof(*block_limits), M_SCSIDA, M_NOWAIT|M_ZERO); if (block_limits == NULL) { printf("dastart: Couldn't malloc block_limits data\n"); /* da_free_periph??? */ break; } scsi_inquiry(&start_ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone_probeblklimits, /*tag_action*/MSG_SIMPLE_Q_TAG, /*inq_buf*/(u_int8_t *)block_limits, /*inq_len*/sizeof(*block_limits), /*evpd*/TRUE, /*page_code*/SVPD_BLOCK_LIMITS, /*sense_len*/SSD_MIN_SIZE, /*timeout*/da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_BLK_LIMITS; xpt_action(start_ccb); break; } case DA_STATE_PROBE_BDC: { struct scsi_vpd_block_device_characteristics *bdc; if (!scsi_vpd_supported_page(periph, SVPD_BDC)) { softc->state = DA_STATE_PROBE_ATA; goto skipstate; } bdc = (struct scsi_vpd_block_device_characteristics *) malloc(sizeof(*bdc), M_SCSIDA, M_NOWAIT|M_ZERO); if (bdc == NULL) { printf("dastart: Couldn't malloc bdc data\n"); /* da_free_periph??? */ break; } scsi_inquiry(&start_ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone_probebdc, /*tag_action*/MSG_SIMPLE_Q_TAG, /*inq_buf*/(u_int8_t *)bdc, /*inq_len*/sizeof(*bdc), /*evpd*/TRUE, /*page_code*/SVPD_BDC, /*sense_len*/SSD_MIN_SIZE, /*timeout*/da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_BDC; xpt_action(start_ccb); break; } case DA_STATE_PROBE_ATA: { struct ata_params *ata_params; if (!scsi_vpd_supported_page(periph, SVPD_ATA_INFORMATION)) { if ((softc->zone_mode == DA_ZONE_HOST_AWARE) || (softc->zone_mode == DA_ZONE_HOST_MANAGED)) { /* * Note that if the ATA VPD page isn't * supported, we aren't talking to an ATA * device anyway. Support for that VPD * page is mandatory for SCSI to ATA (SAT) * translation layers. */ softc->state = DA_STATE_PROBE_ZONE; goto skipstate; } daprobedone(periph, start_ccb); break; } ata_params = &periph->path->device->ident_data; scsi_ata_identify(&start_ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone_probeata, /*tag_action*/MSG_SIMPLE_Q_TAG, /*data_ptr*/(u_int8_t *)ata_params, /*dxfer_len*/sizeof(*ata_params), /*sense_len*/SSD_FULL_SIZE, /*timeout*/da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA; xpt_action(start_ccb); break; } case DA_STATE_PROBE_ATA_LOGDIR: { struct ata_gp_log_dir *log_dir; int retval; retval = 0; if ((softc->flags & DA_FLAG_CAN_ATA_LOG) == 0) { /* * If we don't have log support, not much point in * trying to probe zone support. */ daprobedone(periph, start_ccb); break; } /* * If we have an ATA device (the SCSI ATA Information VPD * page should be present and the ATA identify should have * succeeded) and it supports logs, ask for the log directory. */ log_dir = malloc(sizeof(*log_dir), M_SCSIDA, M_NOWAIT|M_ZERO); if (log_dir == NULL) { xpt_print(periph->path, "Couldn't malloc log_dir " "data\n"); daprobedone(periph, start_ccb); break; } retval = scsi_ata_read_log(&start_ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone_probeatalogdir, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*log_address*/ ATA_LOG_DIRECTORY, /*page_number*/ 0, /*block_count*/ 1, /*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ? AP_PROTO_DMA : AP_PROTO_PIO_IN, /*data_ptr*/ (uint8_t *)log_dir, /*dxfer_len*/ sizeof(*log_dir), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); if (retval != 0) { xpt_print(periph->path, "scsi_ata_read_log() failed!"); free(log_dir, M_SCSIDA); daprobedone(periph, start_ccb); break; } start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_LOGDIR; xpt_action(start_ccb); break; } case DA_STATE_PROBE_ATA_IDDIR: { struct ata_identify_log_pages *id_dir; int retval; retval = 0; /* * Check here to see whether the Identify Device log is * supported in the directory of logs. If so, continue * with requesting the log of identify device pages. */ if ((softc->flags & DA_FLAG_CAN_ATA_IDLOG) == 0) { daprobedone(periph, start_ccb); break; } id_dir = malloc(sizeof(*id_dir), M_SCSIDA, M_NOWAIT | M_ZERO); if (id_dir == NULL) { xpt_print(periph->path, "Couldn't malloc id_dir " "data\n"); daprobedone(periph, start_ccb); break; } retval = scsi_ata_read_log(&start_ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone_probeataiddir, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*log_address*/ ATA_IDENTIFY_DATA_LOG, /*page_number*/ ATA_IDL_PAGE_LIST, /*block_count*/ 1, /*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ? AP_PROTO_DMA : AP_PROTO_PIO_IN, /*data_ptr*/ (uint8_t *)id_dir, /*dxfer_len*/ sizeof(*id_dir), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); if (retval != 0) { xpt_print(periph->path, "scsi_ata_read_log() failed!"); free(id_dir, M_SCSIDA); daprobedone(periph, start_ccb); break; } start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_IDDIR; xpt_action(start_ccb); break; } case DA_STATE_PROBE_ATA_SUP: { struct ata_identify_log_sup_cap *sup_cap; int retval; retval = 0; /* * Check here to see whether the Supported Capabilities log * is in the list of Identify Device logs. */ if ((softc->flags & DA_FLAG_CAN_ATA_SUPCAP) == 0) { daprobedone(periph, start_ccb); break; } sup_cap = malloc(sizeof(*sup_cap), M_SCSIDA, M_NOWAIT|M_ZERO); if (sup_cap == NULL) { xpt_print(periph->path, "Couldn't malloc sup_cap " "data\n"); daprobedone(periph, start_ccb); break; } retval = scsi_ata_read_log(&start_ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone_probeatasup, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*log_address*/ ATA_IDENTIFY_DATA_LOG, /*page_number*/ ATA_IDL_SUP_CAP, /*block_count*/ 1, /*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ? AP_PROTO_DMA : AP_PROTO_PIO_IN, /*data_ptr*/ (uint8_t *)sup_cap, /*dxfer_len*/ sizeof(*sup_cap), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); if (retval != 0) { xpt_print(periph->path, "scsi_ata_read_log() failed!"); free(sup_cap, M_SCSIDA); daprobedone(periph, start_ccb); break; } start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_SUP; xpt_action(start_ccb); break; } case DA_STATE_PROBE_ATA_ZONE: { struct ata_zoned_info_log *ata_zone; int retval; retval = 0; /* * Check here to see whether the zoned device information * page is supported. If so, continue on to request it. * If not, skip to DA_STATE_PROBE_LOG or done. */ if ((softc->flags & DA_FLAG_CAN_ATA_ZONE) == 0) { daprobedone(periph, start_ccb); break; } ata_zone = malloc(sizeof(*ata_zone), M_SCSIDA, M_NOWAIT|M_ZERO); if (ata_zone == NULL) { xpt_print(periph->path, "Couldn't malloc ata_zone " "data\n"); daprobedone(periph, start_ccb); break; } retval = scsi_ata_read_log(&start_ccb->csio, /*retries*/ da_retry_count, /*cbfcnp*/ dadone_probeatazone, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*log_address*/ ATA_IDENTIFY_DATA_LOG, /*page_number*/ ATA_IDL_ZDI, /*block_count*/ 1, /*protocol*/ softc->flags & DA_FLAG_CAN_ATA_DMA ? AP_PROTO_DMA : AP_PROTO_PIO_IN, /*data_ptr*/ (uint8_t *)ata_zone, /*dxfer_len*/ sizeof(*ata_zone), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ da_default_timeout * 1000); if (retval != 0) { xpt_print(periph->path, "scsi_ata_read_log() failed!"); free(ata_zone, M_SCSIDA); daprobedone(periph, start_ccb); break; } start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ATA_ZONE; xpt_action(start_ccb); break; } case DA_STATE_PROBE_ZONE: { struct scsi_vpd_zoned_bdc *bdc; /* * Note that this page will be supported for SCSI protocol * devices that support ZBC (SMR devices), as well as ATA * protocol devices that are behind a SAT (SCSI to ATA * Translation) layer that supports converting ZBC commands * to their ZAC equivalents. */ if (!scsi_vpd_supported_page(periph, SVPD_ZONED_BDC)) { daprobedone(periph, start_ccb); break; } bdc = (struct scsi_vpd_zoned_bdc *) malloc(sizeof(*bdc), M_SCSIDA, M_NOWAIT|M_ZERO); if (bdc == NULL) { xpt_release_ccb(start_ccb); xpt_print(periph->path, "Couldn't malloc zone VPD " "data\n"); break; } scsi_inquiry(&start_ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone_probezone, /*tag_action*/MSG_SIMPLE_Q_TAG, /*inq_buf*/(u_int8_t *)bdc, /*inq_len*/sizeof(*bdc), /*evpd*/TRUE, /*page_code*/SVPD_ZONED_BDC, /*sense_len*/SSD_FULL_SIZE, /*timeout*/da_default_timeout * 1000); start_ccb->ccb_h.ccb_bp = NULL; start_ccb->ccb_h.ccb_state = DA_CCB_PROBE_ZONE; xpt_action(start_ccb); break; } } } /* * In each of the methods below, while its the caller's * responsibility to ensure the request will fit into a * single device request, we might have changed the delete * method due to the device incorrectly advertising either * its supported methods or limits. * * To prevent this causing further issues we validate the * against the methods limits, and warn which would * otherwise be unnecessary. */ static void da_delete_unmap(struct cam_periph *periph, union ccb *ccb, struct bio *bp) { struct da_softc *softc = (struct da_softc *)periph->softc; struct bio *bp1; uint8_t *buf = softc->unmap_buf; struct scsi_unmap_desc *d = (void *)&buf[UNMAP_HEAD_SIZE]; uint64_t lba, lastlba = (uint64_t)-1; uint64_t totalcount = 0; uint64_t count; uint32_t c, lastcount = 0, ranges = 0; /* * Currently this doesn't take the UNMAP * Granularity and Granularity Alignment * fields into account. * * This could result in both unoptimal unmap * requests as as well as UNMAP calls unmapping * fewer LBA's than requested. */ bzero(softc->unmap_buf, sizeof(softc->unmap_buf)); bp1 = bp; do { /* * Note: ada and da are different in how they store the * pending bp's in a trim. ada stores all of them in the * trim_req.bps. da stores all but the first one in the * delete_run_queue. ada then completes all the bps in * its adadone() loop. da completes all the bps in the * delete_run_queue in dadone, and relies on the biodone * after to complete. This should be reconciled since there's * no real reason to do it differently. XXX */ if (bp1 != bp) bioq_insert_tail(&softc->delete_run_queue, bp1); lba = bp1->bio_pblkno; count = bp1->bio_bcount / softc->params.secsize; /* Try to extend the previous range. */ if (lba == lastlba) { c = omin(count, UNMAP_RANGE_MAX - lastcount); lastlba += c; lastcount += c; scsi_ulto4b(lastcount, d[ranges - 1].length); count -= c; lba += c; totalcount += c; } else if ((softc->quirks & DA_Q_STRICT_UNMAP) && softc->unmap_gran != 0) { /* Align length of the previous range. */ if ((c = lastcount % softc->unmap_gran) != 0) { if (lastcount <= c) { totalcount -= lastcount; lastlba = (uint64_t)-1; lastcount = 0; ranges--; } else { totalcount -= c; lastlba -= c; lastcount -= c; scsi_ulto4b(lastcount, d[ranges - 1].length); } } /* Align beginning of the new range. */ c = (lba - softc->unmap_gran_align) % softc->unmap_gran; if (c != 0) { c = softc->unmap_gran - c; if (count <= c) { count = 0; } else { lba += c; count -= c; } } } while (count > 0) { c = omin(count, UNMAP_RANGE_MAX); if (totalcount + c > softc->unmap_max_lba || ranges >= softc->unmap_max_ranges) { xpt_print(periph->path, "%s issuing short delete %ld > %ld" "|| %d >= %d", da_delete_method_desc[softc->delete_method], totalcount + c, softc->unmap_max_lba, ranges, softc->unmap_max_ranges); break; } scsi_u64to8b(lba, d[ranges].lba); scsi_ulto4b(c, d[ranges].length); lba += c; totalcount += c; ranges++; count -= c; lastlba = lba; lastcount = c; } bp1 = cam_iosched_next_trim(softc->cam_iosched); if (bp1 == NULL) break; if (ranges >= softc->unmap_max_ranges || totalcount + bp1->bio_bcount / softc->params.secsize > softc->unmap_max_lba) { cam_iosched_put_back_trim(softc->cam_iosched, bp1); break; } } while (1); /* Align length of the last range. */ if ((softc->quirks & DA_Q_STRICT_UNMAP) && softc->unmap_gran != 0 && (c = lastcount % softc->unmap_gran) != 0) { if (lastcount <= c) ranges--; else scsi_ulto4b(lastcount - c, d[ranges - 1].length); } scsi_ulto2b(ranges * 16 + 6, &buf[0]); scsi_ulto2b(ranges * 16, &buf[2]); scsi_unmap(&ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone, /*tag_action*/MSG_SIMPLE_Q_TAG, /*byte2*/0, /*data_ptr*/ buf, /*dxfer_len*/ ranges * 16 + 8, /*sense_len*/SSD_FULL_SIZE, da_default_timeout * 1000); ccb->ccb_h.ccb_state = DA_CCB_DELETE; ccb->ccb_h.flags |= CAM_UNLOCKED; softc->trim_count++; softc->trim_ranges += ranges; softc->trim_lbas += totalcount; cam_iosched_submit_trim(softc->cam_iosched); } static void da_delete_trim(struct cam_periph *periph, union ccb *ccb, struct bio *bp) { struct da_softc *softc = (struct da_softc *)periph->softc; struct bio *bp1; uint8_t *buf = softc->unmap_buf; uint64_t lastlba = (uint64_t)-1; uint64_t count; uint64_t lba; uint32_t lastcount = 0, c, requestcount; int ranges = 0, off, block_count; bzero(softc->unmap_buf, sizeof(softc->unmap_buf)); bp1 = bp; do { if (bp1 != bp)//XXX imp XXX bioq_insert_tail(&softc->delete_run_queue, bp1); lba = bp1->bio_pblkno; count = bp1->bio_bcount / softc->params.secsize; requestcount = count; /* Try to extend the previous range. */ if (lba == lastlba) { c = omin(count, ATA_DSM_RANGE_MAX - lastcount); lastcount += c; off = (ranges - 1) * 8; buf[off + 6] = lastcount & 0xff; buf[off + 7] = (lastcount >> 8) & 0xff; count -= c; lba += c; } while (count > 0) { c = omin(count, ATA_DSM_RANGE_MAX); off = ranges * 8; buf[off + 0] = lba & 0xff; buf[off + 1] = (lba >> 8) & 0xff; buf[off + 2] = (lba >> 16) & 0xff; buf[off + 3] = (lba >> 24) & 0xff; buf[off + 4] = (lba >> 32) & 0xff; buf[off + 5] = (lba >> 40) & 0xff; buf[off + 6] = c & 0xff; buf[off + 7] = (c >> 8) & 0xff; lba += c; ranges++; count -= c; lastcount = c; if (count != 0 && ranges == softc->trim_max_ranges) { xpt_print(periph->path, "%s issuing short delete %ld > %ld\n", da_delete_method_desc[softc->delete_method], requestcount, (softc->trim_max_ranges - ranges) * ATA_DSM_RANGE_MAX); break; } } lastlba = lba; bp1 = cam_iosched_next_trim(softc->cam_iosched); if (bp1 == NULL) break; if (bp1->bio_bcount / softc->params.secsize > (softc->trim_max_ranges - ranges) * ATA_DSM_RANGE_MAX) { cam_iosched_put_back_trim(softc->cam_iosched, bp1); break; } } while (1); block_count = howmany(ranges, ATA_DSM_BLK_RANGES); scsi_ata_trim(&ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone, /*tag_action*/MSG_SIMPLE_Q_TAG, block_count, /*data_ptr*/buf, /*dxfer_len*/block_count * ATA_DSM_BLK_SIZE, /*sense_len*/SSD_FULL_SIZE, da_default_timeout * 1000); ccb->ccb_h.ccb_state = DA_CCB_DELETE; ccb->ccb_h.flags |= CAM_UNLOCKED; cam_iosched_submit_trim(softc->cam_iosched); } /* * We calculate ws_max_blks here based off d_delmaxsize instead * of using softc->ws_max_blks as it is absolute max for the * device not the protocol max which may well be lower. */ static void da_delete_ws(struct cam_periph *periph, union ccb *ccb, struct bio *bp) { struct da_softc *softc; struct bio *bp1; uint64_t ws_max_blks; uint64_t lba; uint64_t count; /* forward compat with WS32 */ softc = (struct da_softc *)periph->softc; ws_max_blks = softc->disk->d_delmaxsize / softc->params.secsize; lba = bp->bio_pblkno; count = 0; bp1 = bp; do { if (bp1 != bp)//XXX imp XXX bioq_insert_tail(&softc->delete_run_queue, bp1); count += bp1->bio_bcount / softc->params.secsize; if (count > ws_max_blks) { xpt_print(periph->path, "%s issuing short delete %ld > %ld\n", da_delete_method_desc[softc->delete_method], count, ws_max_blks); count = omin(count, ws_max_blks); break; } bp1 = cam_iosched_next_trim(softc->cam_iosched); if (bp1 == NULL) break; if (lba + count != bp1->bio_pblkno || count + bp1->bio_bcount / softc->params.secsize > ws_max_blks) { cam_iosched_put_back_trim(softc->cam_iosched, bp1); break; } } while (1); scsi_write_same(&ccb->csio, /*retries*/da_retry_count, /*cbfcnp*/dadone, /*tag_action*/MSG_SIMPLE_Q_TAG, /*byte2*/softc->delete_method == DA_DELETE_ZERO ? 0 : SWS_UNMAP, softc->delete_method == DA_DELETE_WS16 ? 16 : 10, /*lba*/lba, /*block_count*/count, /*data_ptr*/ __DECONST(void *, zero_region), /*dxfer_len*/ softc->params.secsize, /*sense_len*/SSD_FULL_SIZE, da_default_timeout * 1000); ccb->ccb_h.ccb_state = DA_CCB_DELETE; ccb->ccb_h.flags |= CAM_UNLOCKED; cam_iosched_submit_trim(softc->cam_iosched); } static int cmd6workaround(union ccb *ccb) { struct scsi_rw_6 cmd6; struct scsi_rw_10 *cmd10; struct da_softc *softc; u_int8_t *cdb; struct bio *bp; int frozen; cdb = ccb->csio.cdb_io.cdb_bytes; softc = (struct da_softc *)xpt_path_periph(ccb->ccb_h.path)->softc; if (ccb->ccb_h.ccb_state == DA_CCB_DELETE) { da_delete_methods old_method = softc->delete_method; /* * Typically there are two reasons for failure here * 1. Delete method was detected as supported but isn't * 2. Delete failed due to invalid params e.g. too big * * While we will attempt to choose an alternative delete method * this may result in short deletes if the existing delete * requests from geom are big for the new method chosen. * * This method assumes that the error which triggered this * will not retry the io otherwise a panic will occur */ dadeleteflag(softc, old_method, 0); dadeletemethodchoose(softc, DA_DELETE_DISABLE); if (softc->delete_method == DA_DELETE_DISABLE) xpt_print(ccb->ccb_h.path, "%s failed, disabling BIO_DELETE\n", da_delete_method_desc[old_method]); else xpt_print(ccb->ccb_h.path, "%s failed, switching to %s BIO_DELETE\n", da_delete_method_desc[old_method], da_delete_method_desc[softc->delete_method]); while ((bp = bioq_takefirst(&softc->delete_run_queue)) != NULL) cam_iosched_queue_work(softc->cam_iosched, bp); cam_iosched_queue_work(softc->cam_iosched, (struct bio *)ccb->ccb_h.ccb_bp); ccb->ccb_h.ccb_bp = NULL; return (0); } /* Detect unsupported PREVENT ALLOW MEDIUM REMOVAL. */ if ((ccb->ccb_h.flags & CAM_CDB_POINTER) == 0 && (*cdb == PREVENT_ALLOW) && (softc->quirks & DA_Q_NO_PREVENT) == 0) { if (bootverbose) xpt_print(ccb->ccb_h.path, "PREVENT ALLOW MEDIUM REMOVAL not supported.\n"); softc->quirks |= DA_Q_NO_PREVENT; return (0); } /* Detect unsupported SYNCHRONIZE CACHE(10). */ if ((ccb->ccb_h.flags & CAM_CDB_POINTER) == 0 && (*cdb == SYNCHRONIZE_CACHE) && (softc->quirks & DA_Q_NO_SYNC_CACHE) == 0) { if (bootverbose) xpt_print(ccb->ccb_h.path, "SYNCHRONIZE CACHE(10) not supported.\n"); softc->quirks |= DA_Q_NO_SYNC_CACHE; softc->disk->d_flags &= ~DISKFLAG_CANFLUSHCACHE; return (0); } /* Translation only possible if CDB is an array and cmd is R/W6 */ if ((ccb->ccb_h.flags & CAM_CDB_POINTER) != 0 || (*cdb != READ_6 && *cdb != WRITE_6)) return 0; xpt_print(ccb->ccb_h.path, "READ(6)/WRITE(6) not supported, " "increasing minimum_cmd_size to 10.\n"); softc->minimum_cmd_size = 10; bcopy(cdb, &cmd6, sizeof(struct scsi_rw_6)); cmd10 = (struct scsi_rw_10 *)cdb; cmd10->opcode = (cmd6.opcode == READ_6) ? READ_10 : WRITE_10; cmd10->byte2 = 0; scsi_ulto4b(scsi_3btoul(cmd6.addr), cmd10->addr); cmd10->reserved = 0; scsi_ulto2b(cmd6.length, cmd10->length); cmd10->control = cmd6.control; ccb->csio.cdb_len = sizeof(*cmd10); /* Requeue request, unfreezing queue if necessary */ frozen = (ccb->ccb_h.status & CAM_DEV_QFRZN) != 0; ccb->ccb_h.status = CAM_REQUEUE_REQ; xpt_action(ccb); if (frozen) { cam_release_devq(ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } return (ERESTART); } static void dazonedone(struct cam_periph *periph, union ccb *ccb) { struct da_softc *softc; struct bio *bp; softc = periph->softc; bp = (struct bio *)ccb->ccb_h.ccb_bp; switch (bp->bio_zone.zone_cmd) { case DISK_ZONE_OPEN: case DISK_ZONE_CLOSE: case DISK_ZONE_FINISH: case DISK_ZONE_RWP: break; case DISK_ZONE_REPORT_ZONES: { uint32_t avail_len; struct disk_zone_report *rep; struct scsi_report_zones_hdr *hdr; struct scsi_report_zones_desc *desc; struct disk_zone_rep_entry *entry; uint32_t hdr_len, num_avail; uint32_t num_to_fill, i; int ata; rep = &bp->bio_zone.zone_params.report; avail_len = ccb->csio.dxfer_len - ccb->csio.resid; /* * Note that bio_resid isn't normally used for zone * commands, but it is used by devstat_end_transaction_bio() * to determine how much data was transferred. Because * the size of the SCSI/ATA data structures is different * than the size of the BIO interface structures, the * amount of data actually transferred from the drive will * be different than the amount of data transferred to * the user. */ bp->bio_resid = ccb->csio.resid; hdr = (struct scsi_report_zones_hdr *)ccb->csio.data_ptr; if (avail_len < sizeof(*hdr)) { /* * Is there a better error than EIO here? We asked * for at least the header, and we got less than * that. */ bp->bio_error = EIO; bp->bio_flags |= BIO_ERROR; bp->bio_resid = bp->bio_bcount; break; } if (softc->zone_interface == DA_ZONE_IF_ATA_PASS) ata = 1; else ata = 0; hdr_len = ata ? le32dec(hdr->length) : scsi_4btoul(hdr->length); if (hdr_len > 0) rep->entries_available = hdr_len / sizeof(*desc); else rep->entries_available = 0; /* * NOTE: using the same values for the BIO version of the * same field as the SCSI/ATA values. This means we could * get some additional values that aren't defined in bio.h * if more values of the same field are defined later. */ rep->header.same = hdr->byte4 & SRZ_SAME_MASK; rep->header.maximum_lba = ata ? le64dec(hdr->maximum_lba) : scsi_8btou64(hdr->maximum_lba); /* * If the drive reports no entries that match the query, * we're done. */ if (hdr_len == 0) { rep->entries_filled = 0; break; } num_avail = min((avail_len - sizeof(*hdr)) / sizeof(*desc), hdr_len / sizeof(*desc)); /* * If the drive didn't return any data, then we're done. */ if (num_avail == 0) { rep->entries_filled = 0; break; } num_to_fill = min(num_avail, rep->entries_allocated); /* * If the user didn't allocate any entries for us to fill, * we're done. */ if (num_to_fill == 0) { rep->entries_filled = 0; break; } for (i = 0, desc = &hdr->desc_list[0], entry=&rep->entries[0]; i < num_to_fill; i++, desc++, entry++) { /* * NOTE: we're mapping the values here directly * from the SCSI/ATA bit definitions to the bio.h * definitons. There is also a warning in * disk_zone.h, but the impact is that if * additional values are added in the SCSI/ATA * specs these will be visible to consumers of * this interface. */ entry->zone_type = desc->zone_type & SRZ_TYPE_MASK; entry->zone_condition = (desc->zone_flags & SRZ_ZONE_COND_MASK) >> SRZ_ZONE_COND_SHIFT; entry->zone_flags |= desc->zone_flags & (SRZ_ZONE_NON_SEQ|SRZ_ZONE_RESET); entry->zone_length = ata ? le64dec(desc->zone_length) : scsi_8btou64(desc->zone_length); entry->zone_start_lba = ata ? le64dec(desc->zone_start_lba) : scsi_8btou64(desc->zone_start_lba); entry->write_pointer_lba = ata ? le64dec(desc->write_pointer_lba) : scsi_8btou64(desc->write_pointer_lba); } rep->entries_filled = num_to_fill; break; } case DISK_ZONE_GET_PARAMS: default: /* * In theory we should not get a GET_PARAMS bio, since it * should be handled without queueing the command to the * drive. */ panic("%s: Invalid zone command %d", __func__, bp->bio_zone.zone_cmd); break; } if (bp->bio_zone.zone_cmd == DISK_ZONE_REPORT_ZONES) free(ccb->csio.data_ptr, M_SCSIDA); } static void dadone(struct cam_periph *periph, union ccb *done_ccb) { struct bio *bp, *bp1; struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; da_ccb_state state; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) if (csio->bio != NULL) biotrack(csio->bio, __func__); #endif state = csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK; cam_periph_lock(periph); bp = (struct bio *)done_ccb->ccb_h.ccb_bp; if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { int error; int sf; if ((csio->ccb_h.ccb_state & DA_CCB_RETRY_UA) != 0) sf = SF_RETRY_UA; else sf = 0; error = daerror(done_ccb, CAM_RETRY_SELTO, sf); if (error == ERESTART) { /* A retry was scheduled, so just return. */ cam_periph_unlock(periph); return; } bp = (struct bio *)done_ccb->ccb_h.ccb_bp; if (error != 0) { int queued_error; /* * return all queued I/O with EIO, so that * the client can retry these I/Os in the * proper order should it attempt to recover. */ queued_error = EIO; if (error == ENXIO && (softc->flags & DA_FLAG_PACK_INVALID)== 0) { /* * Catastrophic error. Mark our pack as * invalid. * * XXX See if this is really a media * XXX change first? */ xpt_print(periph->path, "Invalidating pack\n"); softc->flags |= DA_FLAG_PACK_INVALID; #ifdef CAM_IO_STATS softc->invalidations++; #endif queued_error = ENXIO; } cam_iosched_flush(softc->cam_iosched, NULL, queued_error); if (bp != NULL) { bp->bio_error = error; bp->bio_resid = bp->bio_bcount; bp->bio_flags |= BIO_ERROR; } } else if (bp != NULL) { if (state == DA_CCB_DELETE) bp->bio_resid = 0; else bp->bio_resid = csio->resid; bp->bio_error = 0; if (bp->bio_resid != 0) bp->bio_flags |= BIO_ERROR; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } else if (bp != NULL) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) panic("REQ_CMP with QFRZN"); if (bp->bio_cmd == BIO_ZONE) dazonedone(periph, done_ccb); else if (state == DA_CCB_DELETE) bp->bio_resid = 0; else bp->bio_resid = csio->resid; if ((csio->resid > 0) && (bp->bio_cmd != BIO_ZONE)) bp->bio_flags |= BIO_ERROR; if (softc->error_inject != 0) { bp->bio_error = softc->error_inject; bp->bio_resid = bp->bio_bcount; bp->bio_flags |= BIO_ERROR; softc->error_inject = 0; } } if (bp != NULL) biotrack(bp, __func__); LIST_REMOVE(&done_ccb->ccb_h, periph_links.le); if (LIST_EMPTY(&softc->pending_ccbs)) softc->flags |= DA_FLAG_WAS_OTAG; /* * We need to call cam_iosched before we call biodone so that we don't * measure any activity that happens in the completion routine, which in * the case of sendfile can be quite extensive. Release the periph * refcount taken in dastart() for each CCB. */ cam_iosched_bio_complete(softc->cam_iosched, bp, done_ccb); xpt_release_ccb(done_ccb); KASSERT(softc->refcount >= 1, ("dadone softc %p refcount %d", softc, softc->refcount)); softc->refcount--; if (state == DA_CCB_DELETE) { TAILQ_HEAD(, bio) queue; TAILQ_INIT(&queue); TAILQ_CONCAT(&queue, &softc->delete_run_queue.queue, bio_queue); softc->delete_run_queue.insert_point = NULL; /* * Normally, the xpt_release_ccb() above would make sure * that when we have more work to do, that work would * get kicked off. However, we specifically keep * delete_running set to 0 before the call above to * allow other I/O to progress when many BIO_DELETE * requests are pushed down. We set delete_running to 0 * and call daschedule again so that we don't stall if * there are no other I/Os pending apart from BIO_DELETEs. */ cam_iosched_trim_done(softc->cam_iosched); daschedule(periph); cam_periph_unlock(periph); while ((bp1 = TAILQ_FIRST(&queue)) != NULL) { TAILQ_REMOVE(&queue, bp1, bio_queue); bp1->bio_error = bp->bio_error; if (bp->bio_flags & BIO_ERROR) { bp1->bio_flags |= BIO_ERROR; bp1->bio_resid = bp1->bio_bcount; } else bp1->bio_resid = 0; biodone(bp1); } } else { daschedule(periph); cam_periph_unlock(periph); } if (bp != NULL) biodone(bp); return; } static void dadone_probewp(struct cam_periph *periph, union ccb *done_ccb) { struct scsi_mode_header_6 *mode_hdr6; struct scsi_mode_header_10 *mode_hdr10; struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; uint8_t dev_spec; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probewp\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); KASSERT(softc->state == DA_STATE_PROBE_WP, ("State (%d) not PROBE_WP in dadone_probewp, periph %p ccb %p", softc->state, periph, done_ccb)); KASSERT((csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK) == DA_CCB_PROBE_WP, ("CCB State (%lu) not PROBE_WP in dadone_probewp, periph %p ccb %p", (unsigned long)csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK, periph, done_ccb)); if (softc->minimum_cmd_size > 6) { mode_hdr10 = (struct scsi_mode_header_10 *)csio->data_ptr; dev_spec = mode_hdr10->dev_spec; } else { mode_hdr6 = (struct scsi_mode_header_6 *)csio->data_ptr; dev_spec = mode_hdr6->dev_spec; } if (cam_ccb_status(done_ccb) == CAM_REQ_CMP) { if ((dev_spec & 0x80) != 0) softc->disk->d_flags |= DISKFLAG_WRITE_PROTECT; else softc->disk->d_flags &= ~DISKFLAG_WRITE_PROTECT; } else { int error; error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(csio->data_ptr, M_SCSIDA); if ((softc->flags & DA_FLAG_CAN_RC16) != 0) softc->state = DA_STATE_PROBE_RC16; else softc->state = DA_STATE_PROBE_RC; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } static void dadone_proberc(struct cam_periph *periph, union ccb *done_ccb) { struct scsi_read_capacity_data *rdcap; struct scsi_read_capacity_data_long *rcaplong; struct da_softc *softc; struct ccb_scsiio *csio; da_ccb_state state; char *announce_buf; u_int32_t priority; int lbp, n; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_proberc\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; state = csio->ccb_h.ccb_state & DA_CCB_TYPE_MASK; KASSERT(softc->state == DA_STATE_PROBE_RC || softc->state == DA_STATE_PROBE_RC16, ("State (%d) not PROBE_RC* in dadone_proberc, periph %p ccb %p", softc->state, periph, done_ccb)); KASSERT(state == DA_CCB_PROBE_RC || state == DA_CCB_PROBE_RC16, ("CCB State (%lu) not PROBE_RC* in dadone_probewp, periph %p ccb %p", (unsigned long)state, periph, done_ccb)); lbp = 0; rdcap = NULL; rcaplong = NULL; /* XXX TODO: can this be a malloc? */ announce_buf = softc->announce_temp; bzero(announce_buf, DA_ANNOUNCETMP_SZ); if (state == DA_CCB_PROBE_RC) rdcap =(struct scsi_read_capacity_data *)csio->data_ptr; else rcaplong = (struct scsi_read_capacity_data_long *) csio->data_ptr; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { struct disk_params *dp; uint32_t block_size; uint64_t maxsector; u_int lalba; /* Lowest aligned LBA. */ if (state == DA_CCB_PROBE_RC) { block_size = scsi_4btoul(rdcap->length); maxsector = scsi_4btoul(rdcap->addr); lalba = 0; /* * According to SBC-2, if the standard 10 * byte READ CAPACITY command returns 2^32, * we should issue the 16 byte version of * the command, since the device in question * has more sectors than can be represented * with the short version of the command. */ if (maxsector == 0xffffffff) { free(rdcap, M_SCSIDA); softc->state = DA_STATE_PROBE_RC16; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } } else { block_size = scsi_4btoul(rcaplong->length); maxsector = scsi_8btou64(rcaplong->addr); lalba = scsi_2btoul(rcaplong->lalba_lbp); } /* * Because GEOM code just will panic us if we * give them an 'illegal' value we'll avoid that * here. */ if (block_size == 0) { block_size = 512; if (maxsector == 0) maxsector = -1; } if (block_size >= maxphys) { xpt_print(periph->path, "unsupportable block size %ju\n", (uintmax_t) block_size); announce_buf = NULL; cam_periph_invalidate(periph); } else { /* * We pass rcaplong into dasetgeom(), * because it will only use it if it is * non-NULL. */ dasetgeom(periph, block_size, maxsector, rcaplong, sizeof(*rcaplong)); lbp = (lalba & SRC16_LBPME_A); dp = &softc->params; n = snprintf(announce_buf, DA_ANNOUNCETMP_SZ, "%juMB (%ju %u byte sectors", ((uintmax_t)dp->secsize * dp->sectors) / (1024 * 1024), (uintmax_t)dp->sectors, dp->secsize); if (softc->p_type != 0) { n += snprintf(announce_buf + n, DA_ANNOUNCETMP_SZ - n, ", DIF type %d", softc->p_type); } snprintf(announce_buf + n, DA_ANNOUNCETMP_SZ - n, ")"); } } else { int error; /* * Retry any UNIT ATTENTION type errors. They * are expected at boot. */ error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) { /* * A retry was scheuled, so * just return. */ return; } else if (error != 0) { int asc, ascq; int sense_key, error_code; int have_sense; cam_status status; struct ccb_getdev cgd; /* Don't wedge this device's queue */ status = done_ccb->ccb_h.status; if ((status & CAM_DEV_QFRZN) != 0) cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); memset(&cgd, 0, sizeof(cgd)); xpt_setup_ccb(&cgd.ccb_h, done_ccb->ccb_h.path, CAM_PRIORITY_NORMAL); cgd.ccb_h.func_code = XPT_GDEV_TYPE; xpt_action((union ccb *)&cgd); if (scsi_extract_sense_ccb(done_ccb, &error_code, &sense_key, &asc, &ascq)) have_sense = TRUE; else have_sense = FALSE; /* * If we tried READ CAPACITY(16) and failed, * fallback to READ CAPACITY(10). */ if ((state == DA_CCB_PROBE_RC16) && (softc->flags & DA_FLAG_CAN_RC16) && (((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INVALID) || ((have_sense) && (error_code == SSD_CURRENT_ERROR || error_code == SSD_DESC_CURRENT_ERROR) && (sense_key == SSD_KEY_ILLEGAL_REQUEST)))) { cam_periph_assert(periph, MA_OWNED); softc->flags &= ~DA_FLAG_CAN_RC16; free(rdcap, M_SCSIDA); softc->state = DA_STATE_PROBE_RC; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } /* * Attach to anything that claims to be a * direct access or optical disk device, * as long as it doesn't return a "Logical * unit not supported" (0x25) error. * "Internal Target Failure" (0x44) is also * special and typically means that the * device is a SATA drive behind a SATL * translation that's fallen into a * terminally fatal state. */ if ((have_sense) && (asc != 0x25) && (asc != 0x44) && (error_code == SSD_CURRENT_ERROR || error_code == SSD_DESC_CURRENT_ERROR)) { const char *sense_key_desc; const char *asc_desc; dasetgeom(periph, 512, -1, NULL, 0); scsi_sense_desc(sense_key, asc, ascq, &cgd.inq_data, &sense_key_desc, &asc_desc); snprintf(announce_buf, DA_ANNOUNCETMP_SZ, "Attempt to query device " "size failed: %s, %s", sense_key_desc, asc_desc); } else { if (have_sense) scsi_sense_print(&done_ccb->csio); else { xpt_print(periph->path, "got CAM status %#x\n", done_ccb->ccb_h.status); } xpt_print(periph->path, "fatal error, " "failed to attach to device\n"); announce_buf = NULL; /* * Free up resources. */ cam_periph_invalidate(periph); } } } free(csio->data_ptr, M_SCSIDA); if (announce_buf != NULL && ((softc->flags & DA_FLAG_ANNOUNCED) == 0)) { struct sbuf sb; sbuf_new(&sb, softc->announcebuf, DA_ANNOUNCE_SZ, SBUF_FIXEDLEN); xpt_announce_periph_sbuf(periph, &sb, announce_buf); xpt_announce_quirks_sbuf(periph, &sb, softc->quirks, DA_Q_BIT_STRING); sbuf_finish(&sb); sbuf_putbuf(&sb); /* * Create our sysctl variables, now that we know * we have successfully attached. */ /* increase the refcount */ if (da_periph_acquire(periph, DA_REF_SYSCTL) == 0) { taskqueue_enqueue(taskqueue_thread, &softc->sysctl_task); } else { /* XXX This message is useless! */ xpt_print(periph->path, "fatal error, " "could not acquire reference count\n"); } } /* We already probed the device. */ if (softc->flags & DA_FLAG_PROBED) { daprobedone(periph, done_ccb); return; } /* Ensure re-probe doesn't see old delete. */ softc->delete_available = 0; dadeleteflag(softc, DA_DELETE_ZERO, 1); if (lbp && (softc->quirks & DA_Q_NO_UNMAP) == 0) { /* * Based on older SBC-3 spec revisions * any of the UNMAP methods "may" be * available via LBP given this flag so * we flag all of them as available and * then remove those which further * probes confirm aren't available * later. * * We could also check readcap(16) p_type * flag to exclude one or more invalid * write same (X) types here */ dadeleteflag(softc, DA_DELETE_WS16, 1); dadeleteflag(softc, DA_DELETE_WS10, 1); dadeleteflag(softc, DA_DELETE_UNMAP, 1); softc->state = DA_STATE_PROBE_LBP; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } softc->state = DA_STATE_PROBE_BDC; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } static void dadone_probelbp(struct cam_periph *periph, union ccb *done_ccb) { struct scsi_vpd_logical_block_prov *lbp; struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probelbp\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; lbp = (struct scsi_vpd_logical_block_prov *)csio->data_ptr; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { /* * T10/1799-D Revision 31 states at least one of these * must be supported but we don't currently enforce this. */ dadeleteflag(softc, DA_DELETE_WS16, (lbp->flags & SVPD_LBP_WS16)); dadeleteflag(softc, DA_DELETE_WS10, (lbp->flags & SVPD_LBP_WS10)); dadeleteflag(softc, DA_DELETE_UNMAP, (lbp->flags & SVPD_LBP_UNMAP)); } else { int error; error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } /* * Failure indicates we don't support any SBC-3 * delete methods with UNMAP */ } } free(lbp, M_SCSIDA); softc->state = DA_STATE_PROBE_BLK_LIMITS; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } static void dadone_probeblklimits(struct cam_periph *periph, union ccb *done_ccb) { struct scsi_vpd_block_limits *block_limits; struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeblklimits\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; block_limits = (struct scsi_vpd_block_limits *)csio->data_ptr; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { uint32_t max_txfer_len = scsi_4btoul( block_limits->max_txfer_len); uint32_t max_unmap_lba_cnt = scsi_4btoul( block_limits->max_unmap_lba_cnt); uint32_t max_unmap_blk_cnt = scsi_4btoul( block_limits->max_unmap_blk_cnt); uint32_t unmap_gran = scsi_4btoul( block_limits->opt_unmap_grain); uint32_t unmap_gran_align = scsi_4btoul( block_limits->unmap_grain_align); uint64_t ws_max_blks = scsi_8btou64( block_limits->max_write_same_length); if (max_txfer_len != 0) { softc->disk->d_maxsize = MIN(softc->maxio, (off_t)max_txfer_len * softc->params.secsize); } /* * We should already support UNMAP but we check lba * and block count to be sure */ if (max_unmap_lba_cnt != 0x00L && max_unmap_blk_cnt != 0x00L) { softc->unmap_max_lba = max_unmap_lba_cnt; softc->unmap_max_ranges = min(max_unmap_blk_cnt, UNMAP_MAX_RANGES); if (unmap_gran > 1) { softc->unmap_gran = unmap_gran; if (unmap_gran_align & 0x80000000) { softc->unmap_gran_align = unmap_gran_align & 0x7fffffff; } } } else { /* * Unexpected UNMAP limits which means the * device doesn't actually support UNMAP */ dadeleteflag(softc, DA_DELETE_UNMAP, 0); } if (ws_max_blks != 0x00L) softc->ws_max_blks = ws_max_blks; } else { int error; error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } /* * Failure here doesn't mean UNMAP is not * supported as this is an optional page. */ softc->unmap_max_lba = 1; softc->unmap_max_ranges = 1; } } free(block_limits, M_SCSIDA); softc->state = DA_STATE_PROBE_BDC; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } static void dadone_probebdc(struct cam_periph *periph, union ccb *done_ccb) { struct scsi_vpd_block_device_characteristics *bdc; struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probebdc\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; bdc = (struct scsi_vpd_block_device_characteristics *)csio->data_ptr; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { uint32_t valid_len; /* * Disable queue sorting for non-rotational media * by default. */ u_int16_t old_rate = softc->disk->d_rotation_rate; valid_len = csio->dxfer_len - csio->resid; if (SBDC_IS_PRESENT(bdc, valid_len, medium_rotation_rate)) { softc->disk->d_rotation_rate = scsi_2btoul(bdc->medium_rotation_rate); if (softc->disk->d_rotation_rate == SVPD_NON_ROTATING) { cam_iosched_set_sort_queue( softc->cam_iosched, 0); softc->flags &= ~DA_FLAG_ROTATING; } if (softc->disk->d_rotation_rate != old_rate) { disk_attr_changed(softc->disk, "GEOM::rotation_rate", M_NOWAIT); } } if ((SBDC_IS_PRESENT(bdc, valid_len, flags)) && (softc->zone_mode == DA_ZONE_NONE)) { int ata_proto; if (scsi_vpd_supported_page(periph, SVPD_ATA_INFORMATION)) ata_proto = 1; else ata_proto = 0; /* * The Zoned field will only be set for * Drive Managed and Host Aware drives. If * they are Host Managed, the device type * in the standard INQUIRY data should be * set to T_ZBC_HM (0x14). */ if ((bdc->flags & SVPD_ZBC_MASK) == SVPD_HAW_ZBC) { softc->zone_mode = DA_ZONE_HOST_AWARE; softc->zone_interface = (ata_proto) ? DA_ZONE_IF_ATA_SAT : DA_ZONE_IF_SCSI; } else if ((bdc->flags & SVPD_ZBC_MASK) == SVPD_DM_ZBC) { softc->zone_mode =DA_ZONE_DRIVE_MANAGED; softc->zone_interface = (ata_proto) ? DA_ZONE_IF_ATA_SAT : DA_ZONE_IF_SCSI; } else if ((bdc->flags & SVPD_ZBC_MASK) != SVPD_ZBC_NR) { xpt_print(periph->path, "Unknown zoned " "type %#x", bdc->flags & SVPD_ZBC_MASK); } } } else { int error; error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(bdc, M_SCSIDA); softc->state = DA_STATE_PROBE_ATA; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } static void dadone_probeata(struct cam_periph *periph, union ccb *done_ccb) { struct ata_params *ata_params; struct ccb_scsiio *csio; struct da_softc *softc; u_int32_t priority; int continue_probe; int error; int16_t *ptr; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeata\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; ata_params = (struct ata_params *)csio->data_ptr; ptr = (uint16_t *)ata_params; continue_probe = 0; error = 0; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { uint16_t old_rate; ata_param_fixup(ata_params); if (ata_params->support_dsm & ATA_SUPPORT_DSM_TRIM && (softc->quirks & DA_Q_NO_UNMAP) == 0) { dadeleteflag(softc, DA_DELETE_ATA_TRIM, 1); if (ata_params->max_dsm_blocks != 0) softc->trim_max_ranges = min( softc->trim_max_ranges, ata_params->max_dsm_blocks * ATA_DSM_BLK_RANGES); } /* * Disable queue sorting for non-rotational media * by default. */ old_rate = softc->disk->d_rotation_rate; softc->disk->d_rotation_rate = ata_params->media_rotation_rate; if (softc->disk->d_rotation_rate == ATA_RATE_NON_ROTATING) { cam_iosched_set_sort_queue(softc->cam_iosched, 0); softc->flags &= ~DA_FLAG_ROTATING; } if (softc->disk->d_rotation_rate != old_rate) { disk_attr_changed(softc->disk, "GEOM::rotation_rate", M_NOWAIT); } cam_periph_assert(periph, MA_OWNED); if (ata_params->capabilities1 & ATA_SUPPORT_DMA) softc->flags |= DA_FLAG_CAN_ATA_DMA; if (ata_params->support.extension & ATA_SUPPORT_GENLOG) softc->flags |= DA_FLAG_CAN_ATA_LOG; /* * At this point, if we have a SATA host aware drive, * we communicate via ATA passthrough unless the * SAT layer supports ZBC -> ZAC translation. In * that case, * * XXX KDM figure out how to detect a host managed * SATA drive. */ if (softc->zone_mode == DA_ZONE_NONE) { /* * Note that we don't override the zone * mode or interface if it has already been * set. This is because it has either been * set as a quirk, or when we probed the * SCSI Block Device Characteristics page, * the zoned field was set. The latter * means that the SAT layer supports ZBC to * ZAC translation, and we would prefer to * use that if it is available. */ if ((ata_params->support3 & ATA_SUPPORT_ZONE_MASK) == ATA_SUPPORT_ZONE_HOST_AWARE) { softc->zone_mode = DA_ZONE_HOST_AWARE; softc->zone_interface = DA_ZONE_IF_ATA_PASS; } else if ((ata_params->support3 & ATA_SUPPORT_ZONE_MASK) == ATA_SUPPORT_ZONE_DEV_MANAGED) { softc->zone_mode =DA_ZONE_DRIVE_MANAGED; softc->zone_interface = DA_ZONE_IF_ATA_PASS; } } } else { error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } if ((softc->zone_mode == DA_ZONE_HOST_AWARE) || (softc->zone_mode == DA_ZONE_HOST_MANAGED)) { /* * If the ATA IDENTIFY failed, we could be talking * to a SCSI drive, although that seems unlikely, * since the drive did report that it supported the * ATA Information VPD page. If the ATA IDENTIFY * succeeded, and the SAT layer doesn't support * ZBC -> ZAC translation, continue on to get the * directory of ATA logs, and complete the rest of * the ZAC probe. If the SAT layer does support * ZBC -> ZAC translation, we want to use that, * and we'll probe the SCSI Zoned Block Device * Characteristics VPD page next. */ if ((error == 0) && (softc->flags & DA_FLAG_CAN_ATA_LOG) && (softc->zone_interface == DA_ZONE_IF_ATA_PASS)) softc->state = DA_STATE_PROBE_ATA_LOGDIR; else softc->state = DA_STATE_PROBE_ZONE; continue_probe = 1; } if (continue_probe != 0) { xpt_schedule(periph, priority); xpt_release_ccb(done_ccb); return; } else daprobedone(periph, done_ccb); return; } static void dadone_probeatalogdir(struct cam_periph *periph, union ccb *done_ccb) { struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; int error; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeatalogdir\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { error = 0; softc->valid_logdir_len = 0; bzero(&softc->ata_logdir, sizeof(softc->ata_logdir)); softc->valid_logdir_len = csio->dxfer_len - csio->resid; if (softc->valid_logdir_len > 0) bcopy(csio->data_ptr, &softc->ata_logdir, min(softc->valid_logdir_len, sizeof(softc->ata_logdir))); /* * Figure out whether the Identify Device log is * supported. The General Purpose log directory * has a header, and lists the number of pages * available for each GP log identified by the * offset into the list. */ if ((softc->valid_logdir_len >= ((ATA_IDENTIFY_DATA_LOG + 1) * sizeof(uint16_t))) && (le16dec(softc->ata_logdir.header) == ATA_GP_LOG_DIR_VERSION) && (le16dec(&softc->ata_logdir.num_pages[ (ATA_IDENTIFY_DATA_LOG * sizeof(uint16_t)) - sizeof(uint16_t)]) > 0)){ softc->flags |= DA_FLAG_CAN_ATA_IDLOG; } else { softc->flags &= ~DA_FLAG_CAN_ATA_IDLOG; } } else { error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { /* * If we can't get the ATA log directory, * then ATA logs are effectively not * supported even if the bit is set in the * identify data. */ softc->flags &= ~(DA_FLAG_CAN_ATA_LOG | DA_FLAG_CAN_ATA_IDLOG); if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(csio->data_ptr, M_SCSIDA); if ((error == 0) && (softc->flags & DA_FLAG_CAN_ATA_IDLOG)) { softc->state = DA_STATE_PROBE_ATA_IDDIR; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } daprobedone(periph, done_ccb); return; } static void dadone_probeataiddir(struct cam_periph *periph, union ccb *done_ccb) { struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; int error; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeataiddir\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { off_t entries_offset, max_entries; error = 0; softc->valid_iddir_len = 0; bzero(&softc->ata_iddir, sizeof(softc->ata_iddir)); softc->flags &= ~(DA_FLAG_CAN_ATA_SUPCAP | DA_FLAG_CAN_ATA_ZONE); softc->valid_iddir_len = csio->dxfer_len - csio->resid; if (softc->valid_iddir_len > 0) bcopy(csio->data_ptr, &softc->ata_iddir, min(softc->valid_iddir_len, sizeof(softc->ata_iddir))); entries_offset = __offsetof(struct ata_identify_log_pages,entries); max_entries = softc->valid_iddir_len - entries_offset; if ((softc->valid_iddir_len > (entries_offset + 1)) && (le64dec(softc->ata_iddir.header) == ATA_IDLOG_REVISION) && (softc->ata_iddir.entry_count > 0)) { int num_entries, i; num_entries = softc->ata_iddir.entry_count; num_entries = min(num_entries, softc->valid_iddir_len - entries_offset); for (i = 0; i < num_entries && i < max_entries; i++) { if (softc->ata_iddir.entries[i] == ATA_IDL_SUP_CAP) softc->flags |= DA_FLAG_CAN_ATA_SUPCAP; else if (softc->ata_iddir.entries[i] == ATA_IDL_ZDI) softc->flags |= DA_FLAG_CAN_ATA_ZONE; if ((softc->flags & DA_FLAG_CAN_ATA_SUPCAP) && (softc->flags & DA_FLAG_CAN_ATA_ZONE)) break; } } } else { error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { /* * If we can't get the ATA Identify Data log * directory, then it effectively isn't * supported even if the ATA Log directory * a non-zero number of pages present for * this log. */ softc->flags &= ~DA_FLAG_CAN_ATA_IDLOG; if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(csio->data_ptr, M_SCSIDA); if ((error == 0) && (softc->flags & DA_FLAG_CAN_ATA_SUPCAP)) { softc->state = DA_STATE_PROBE_ATA_SUP; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } daprobedone(periph, done_ccb); return; } static void dadone_probeatasup(struct cam_periph *periph, union ccb *done_ccb) { struct da_softc *softc; struct ccb_scsiio *csio; u_int32_t priority; int error; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeatasup\n")); softc = (struct da_softc *)periph->softc; priority = done_ccb->ccb_h.pinfo.priority; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { uint32_t valid_len; size_t needed_size; struct ata_identify_log_sup_cap *sup_cap; error = 0; sup_cap = (struct ata_identify_log_sup_cap *)csio->data_ptr; valid_len = csio->dxfer_len - csio->resid; needed_size = __offsetof(struct ata_identify_log_sup_cap, sup_zac_cap) + 1 + sizeof(sup_cap->sup_zac_cap); if (valid_len >= needed_size) { uint64_t zoned, zac_cap; zoned = le64dec(sup_cap->zoned_cap); if (zoned & ATA_ZONED_VALID) { /* * This should have already been * set, because this is also in the * ATA identify data. */ if ((zoned & ATA_ZONED_MASK) == ATA_SUPPORT_ZONE_HOST_AWARE) softc->zone_mode = DA_ZONE_HOST_AWARE; else if ((zoned & ATA_ZONED_MASK) == ATA_SUPPORT_ZONE_DEV_MANAGED) softc->zone_mode = DA_ZONE_DRIVE_MANAGED; } zac_cap = le64dec(sup_cap->sup_zac_cap); if (zac_cap & ATA_SUP_ZAC_CAP_VALID) { if (zac_cap & ATA_REPORT_ZONES_SUP) softc->zone_flags |= DA_ZONE_FLAG_RZ_SUP; if (zac_cap & ATA_ND_OPEN_ZONE_SUP) softc->zone_flags |= DA_ZONE_FLAG_OPEN_SUP; if (zac_cap & ATA_ND_CLOSE_ZONE_SUP) softc->zone_flags |= DA_ZONE_FLAG_CLOSE_SUP; if (zac_cap & ATA_ND_FINISH_ZONE_SUP) softc->zone_flags |= DA_ZONE_FLAG_FINISH_SUP; if (zac_cap & ATA_ND_RWP_SUP) softc->zone_flags |= DA_ZONE_FLAG_RWP_SUP; } else { /* * This field was introduced in * ACS-4, r08 on April 28th, 2015. * If the drive firmware was written * to an earlier spec, it won't have * the field. So, assume all * commands are supported. */ softc->zone_flags |= DA_ZONE_FLAG_SUP_MASK; } } } else { error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { /* * If we can't get the ATA Identify Data * Supported Capabilities page, clear the * flag... */ softc->flags &= ~DA_FLAG_CAN_ATA_SUPCAP; /* * And clear zone capabilities. */ softc->zone_flags &= ~DA_ZONE_FLAG_SUP_MASK; if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(csio->data_ptr, M_SCSIDA); if ((error == 0) && (softc->flags & DA_FLAG_CAN_ATA_ZONE)) { softc->state = DA_STATE_PROBE_ATA_ZONE; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); return; } daprobedone(periph, done_ccb); return; } static void dadone_probeatazone(struct cam_periph *periph, union ccb *done_ccb) { struct da_softc *softc; struct ccb_scsiio *csio; int error; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probeatazone\n")); softc = (struct da_softc *)periph->softc; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { struct ata_zoned_info_log *zi_log; uint32_t valid_len; size_t needed_size; zi_log = (struct ata_zoned_info_log *)csio->data_ptr; valid_len = csio->dxfer_len - csio->resid; needed_size = __offsetof(struct ata_zoned_info_log, version_info) + 1 + sizeof(zi_log->version_info); if (valid_len >= needed_size) { uint64_t tmpvar; tmpvar = le64dec(zi_log->zoned_cap); if (tmpvar & ATA_ZDI_CAP_VALID) { if (tmpvar & ATA_ZDI_CAP_URSWRZ) softc->zone_flags |= DA_ZONE_FLAG_URSWRZ; else softc->zone_flags &= ~DA_ZONE_FLAG_URSWRZ; } tmpvar = le64dec(zi_log->optimal_seq_zones); if (tmpvar & ATA_ZDI_OPT_SEQ_VALID) { softc->zone_flags |= DA_ZONE_FLAG_OPT_SEQ_SET; softc->optimal_seq_zones = (tmpvar & ATA_ZDI_OPT_SEQ_MASK); } else { softc->zone_flags &= ~DA_ZONE_FLAG_OPT_SEQ_SET; softc->optimal_seq_zones = 0; } tmpvar =le64dec(zi_log->optimal_nonseq_zones); if (tmpvar & ATA_ZDI_OPT_NS_VALID) { softc->zone_flags |= DA_ZONE_FLAG_OPT_NONSEQ_SET; softc->optimal_nonseq_zones = (tmpvar & ATA_ZDI_OPT_NS_MASK); } else { softc->zone_flags &= ~DA_ZONE_FLAG_OPT_NONSEQ_SET; softc->optimal_nonseq_zones = 0; } tmpvar = le64dec(zi_log->max_seq_req_zones); if (tmpvar & ATA_ZDI_MAX_SEQ_VALID) { softc->zone_flags |= DA_ZONE_FLAG_MAX_SEQ_SET; softc->max_seq_zones = (tmpvar & ATA_ZDI_MAX_SEQ_MASK); } else { softc->zone_flags &= ~DA_ZONE_FLAG_MAX_SEQ_SET; softc->max_seq_zones = 0; } } } else { error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { softc->flags &= ~DA_FLAG_CAN_ATA_ZONE; softc->flags &= ~DA_ZONE_FLAG_SET_MASK; if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(csio->data_ptr, M_SCSIDA); daprobedone(periph, done_ccb); return; } static void dadone_probezone(struct cam_periph *periph, union ccb *done_ccb) { struct da_softc *softc; struct ccb_scsiio *csio; int error; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_probezone\n")); softc = (struct da_softc *)periph->softc; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); if ((csio->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { uint32_t valid_len; size_t needed_len; struct scsi_vpd_zoned_bdc *zoned_bdc; error = 0; zoned_bdc = (struct scsi_vpd_zoned_bdc *)csio->data_ptr; valid_len = csio->dxfer_len - csio->resid; needed_len = __offsetof(struct scsi_vpd_zoned_bdc, max_seq_req_zones) + 1 + sizeof(zoned_bdc->max_seq_req_zones); if ((valid_len >= needed_len) && (scsi_2btoul(zoned_bdc->page_length) >= SVPD_ZBDC_PL)) { if (zoned_bdc->flags & SVPD_ZBDC_URSWRZ) softc->zone_flags |= DA_ZONE_FLAG_URSWRZ; else softc->zone_flags &= ~DA_ZONE_FLAG_URSWRZ; softc->optimal_seq_zones = scsi_4btoul(zoned_bdc->optimal_seq_zones); softc->zone_flags |= DA_ZONE_FLAG_OPT_SEQ_SET; softc->optimal_nonseq_zones = scsi_4btoul( zoned_bdc->optimal_nonseq_zones); softc->zone_flags |= DA_ZONE_FLAG_OPT_NONSEQ_SET; softc->max_seq_zones = scsi_4btoul(zoned_bdc->max_seq_req_zones); softc->zone_flags |= DA_ZONE_FLAG_MAX_SEQ_SET; } /* * All of the zone commands are mandatory for SCSI * devices. * * XXX KDM this is valid as of September 2015. * Re-check this assumption once the SAT spec is * updated to support SCSI ZBC to ATA ZAC mapping. * Since ATA allows zone commands to be reported * as supported or not, this may not necessarily * be true for an ATA device behind a SAT (SCSI to * ATA Translation) layer. */ softc->zone_flags |= DA_ZONE_FLAG_SUP_MASK; } else { error = daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA|SF_NO_PRINT); if (error == ERESTART) return; else if (error != 0) { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge this device's queue */ cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } } } free(csio->data_ptr, M_SCSIDA); daprobedone(periph, done_ccb); return; } static void dadone_tur(struct cam_periph *periph, union ccb *done_ccb) { struct da_softc *softc; struct ccb_scsiio *csio; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("dadone_tur\n")); softc = (struct da_softc *)periph->softc; csio = &done_ccb->csio; cam_periph_assert(periph, MA_OWNED); if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (daerror(done_ccb, CAM_RETRY_SELTO, SF_RETRY_UA | SF_NO_RECOVERY | SF_NO_PRINT) == ERESTART) return; /* Will complete again, keep reference */ if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } softc->flags &= ~DA_FLAG_TUR_PENDING; xpt_release_ccb(done_ccb); da_periph_release_locked(periph, DA_REF_TUR); return; } static void dareprobe(struct cam_periph *periph) { struct da_softc *softc; int status; softc = (struct da_softc *)periph->softc; cam_periph_assert(periph, MA_OWNED); /* Probe in progress; don't interfere. */ if (softc->state != DA_STATE_NORMAL) return; status = da_periph_acquire(periph, DA_REF_REPROBE); KASSERT(status == 0, ("dareprobe: cam_periph_acquire failed")); softc->state = DA_STATE_PROBE_WP; xpt_schedule(periph, CAM_PRIORITY_DEV); } static int daerror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags) { struct da_softc *softc; struct cam_periph *periph; int error, error_code, sense_key, asc, ascq; #if defined(BUF_TRACKING) || defined(FULL_BUF_TRACKING) if (ccb->csio.bio != NULL) biotrack(ccb->csio.bio, __func__); #endif periph = xpt_path_periph(ccb->ccb_h.path); softc = (struct da_softc *)periph->softc; cam_periph_assert(periph, MA_OWNED); /* * Automatically detect devices that do not support * READ(6)/WRITE(6) and upgrade to using 10 byte cdbs. */ error = 0; if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INVALID) { error = cmd6workaround(ccb); } else if (scsi_extract_sense_ccb(ccb, &error_code, &sense_key, &asc, &ascq)) { if (sense_key == SSD_KEY_ILLEGAL_REQUEST) error = cmd6workaround(ccb); /* * If the target replied with CAPACITY DATA HAS CHANGED UA, * query the capacity and notify upper layers. */ else if (sense_key == SSD_KEY_UNIT_ATTENTION && asc == 0x2A && ascq == 0x09) { xpt_print(periph->path, "Capacity data has changed\n"); softc->flags &= ~DA_FLAG_PROBED; dareprobe(periph); sense_flags |= SF_NO_PRINT; } else if (sense_key == SSD_KEY_UNIT_ATTENTION && asc == 0x28 && ascq == 0x00) { softc->flags &= ~DA_FLAG_PROBED; disk_media_changed(softc->disk, M_NOWAIT); } else if (sense_key == SSD_KEY_UNIT_ATTENTION && asc == 0x3F && ascq == 0x03) { xpt_print(periph->path, "INQUIRY data has changed\n"); softc->flags &= ~DA_FLAG_PROBED; dareprobe(periph); sense_flags |= SF_NO_PRINT; } else if (sense_key == SSD_KEY_NOT_READY && asc == 0x3a && (softc->flags & DA_FLAG_PACK_INVALID) == 0) { softc->flags |= DA_FLAG_PACK_INVALID; disk_media_gone(softc->disk, M_NOWAIT); } } if (error == ERESTART) return (ERESTART); #ifdef CAM_IO_STATS switch (ccb->ccb_h.status & CAM_STATUS_MASK) { case CAM_CMD_TIMEOUT: softc->timeouts++; break; case CAM_REQ_ABORTED: case CAM_REQ_CMP_ERR: case CAM_REQ_TERMIO: case CAM_UNREC_HBA_ERROR: case CAM_DATA_RUN_ERR: softc->errors++; break; default: break; } #endif /* * XXX * Until we have a better way of doing pack validation, * don't treat UAs as errors. */ sense_flags |= SF_RETRY_UA; if (softc->quirks & DA_Q_RETRY_BUSY) sense_flags |= SF_RETRY_BUSY; return(cam_periph_error(ccb, cam_flags, sense_flags)); } static void damediapoll(void *arg) { struct cam_periph *periph = arg; struct da_softc *softc = periph->softc; if (!cam_iosched_has_work_flags(softc->cam_iosched, DA_WORK_TUR) && (softc->flags & DA_FLAG_TUR_PENDING) == 0 && softc->state == DA_STATE_NORMAL && LIST_EMPTY(&softc->pending_ccbs)) { if (da_periph_acquire(periph, DA_REF_TUR) == 0) { cam_iosched_set_work_flags(softc->cam_iosched, DA_WORK_TUR); daschedule(periph); } } /* Queue us up again */ if (da_poll_period != 0) callout_schedule(&softc->mediapoll_c, da_poll_period * hz); } static void daprevent(struct cam_periph *periph, int action) { struct da_softc *softc; union ccb *ccb; int error; cam_periph_assert(periph, MA_OWNED); softc = (struct da_softc *)periph->softc; if (((action == PR_ALLOW) && (softc->flags & DA_FLAG_PACK_LOCKED) == 0) || ((action == PR_PREVENT) && (softc->flags & DA_FLAG_PACK_LOCKED) != 0)) { return; } ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); scsi_prevent(&ccb->csio, /*retries*/1, /*cbcfp*/NULL, MSG_SIMPLE_Q_TAG, action, SSD_FULL_SIZE, 5000); error = cam_periph_runccb(ccb, daerror, CAM_RETRY_SELTO, SF_RETRY_UA | SF_NO_PRINT, softc->disk->d_devstat); if (error == 0) { if (action == PR_ALLOW) softc->flags &= ~DA_FLAG_PACK_LOCKED; else softc->flags |= DA_FLAG_PACK_LOCKED; } xpt_release_ccb(ccb); } static void dasetgeom(struct cam_periph *periph, uint32_t block_len, uint64_t maxsector, struct scsi_read_capacity_data_long *rcaplong, size_t rcap_len) { struct ccb_calc_geometry ccg; struct da_softc *softc; struct disk_params *dp; u_int lbppbe, lalba; int error; softc = (struct da_softc *)periph->softc; dp = &softc->params; dp->secsize = block_len; dp->sectors = maxsector + 1; if (rcaplong != NULL) { lbppbe = rcaplong->prot_lbppbe & SRC16_LBPPBE; lalba = scsi_2btoul(rcaplong->lalba_lbp); lalba &= SRC16_LALBA_A; if (rcaplong->prot & SRC16_PROT_EN) softc->p_type = ((rcaplong->prot & SRC16_P_TYPE) >> SRC16_P_TYPE_SHIFT) + 1; else softc->p_type = 0; } else { lbppbe = 0; lalba = 0; softc->p_type = 0; } if (lbppbe > 0) { dp->stripesize = block_len << lbppbe; dp->stripeoffset = (dp->stripesize - block_len * lalba) % dp->stripesize; } else if (softc->quirks & DA_Q_4K) { dp->stripesize = 4096; dp->stripeoffset = 0; } else if (softc->unmap_gran != 0) { dp->stripesize = block_len * softc->unmap_gran; dp->stripeoffset = (dp->stripesize - block_len * softc->unmap_gran_align) % dp->stripesize; } else { dp->stripesize = 0; dp->stripeoffset = 0; } /* * Have the controller provide us with a geometry * for this disk. The only time the geometry * matters is when we boot and the controller * is the only one knowledgeable enough to come * up with something that will make this a bootable * device. */ memset(&ccg, 0, sizeof(ccg)); xpt_setup_ccb(&ccg.ccb_h, periph->path, CAM_PRIORITY_NORMAL); ccg.ccb_h.func_code = XPT_CALC_GEOMETRY; ccg.block_size = dp->secsize; ccg.volume_size = dp->sectors; ccg.heads = 0; ccg.secs_per_track = 0; ccg.cylinders = 0; xpt_action((union ccb*)&ccg); if ((ccg.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { /* * We don't know what went wrong here- but just pick * a geometry so we don't have nasty things like divide * by zero. */ dp->heads = 255; dp->secs_per_track = 255; dp->cylinders = dp->sectors / (255 * 255); if (dp->cylinders == 0) { dp->cylinders = 1; } } else { dp->heads = ccg.heads; dp->secs_per_track = ccg.secs_per_track; dp->cylinders = ccg.cylinders; } /* * If the user supplied a read capacity buffer, and if it is * different than the previous buffer, update the data in the EDT. * If it's the same, we don't bother. This avoids sending an * update every time someone opens this device. */ if ((rcaplong != NULL) && (bcmp(rcaplong, &softc->rcaplong, min(sizeof(softc->rcaplong), rcap_len)) != 0)) { struct ccb_dev_advinfo cdai; memset(&cdai, 0, sizeof(cdai)); xpt_setup_ccb(&cdai.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cdai.ccb_h.func_code = XPT_DEV_ADVINFO; cdai.buftype = CDAI_TYPE_RCAPLONG; cdai.flags = CDAI_FLAG_STORE; cdai.bufsiz = rcap_len; cdai.buf = (uint8_t *)rcaplong; xpt_action((union ccb *)&cdai); if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE); if (cdai.ccb_h.status != CAM_REQ_CMP) { xpt_print(periph->path, "%s: failed to set read " "capacity advinfo\n", __func__); /* Use cam_error_print() to decode the status */ cam_error_print((union ccb *)&cdai, CAM_ESF_CAM_STATUS, CAM_EPF_ALL); } else { bcopy(rcaplong, &softc->rcaplong, min(sizeof(softc->rcaplong), rcap_len)); } } softc->disk->d_sectorsize = softc->params.secsize; softc->disk->d_mediasize = softc->params.secsize * (off_t)softc->params.sectors; softc->disk->d_stripesize = softc->params.stripesize; softc->disk->d_stripeoffset = softc->params.stripeoffset; /* XXX: these are not actually "firmware" values, so they may be wrong */ softc->disk->d_fwsectors = softc->params.secs_per_track; softc->disk->d_fwheads = softc->params.heads; softc->disk->d_devstat->block_size = softc->params.secsize; softc->disk->d_devstat->flags &= ~DEVSTAT_BS_UNAVAILABLE; error = disk_resize(softc->disk, M_NOWAIT); if (error != 0) xpt_print(periph->path, "disk_resize(9) failed, error = %d\n", error); } static void dasendorderedtag(void *arg) { struct cam_periph *periph = arg; struct da_softc *softc = periph->softc; cam_periph_assert(periph, MA_OWNED); if (da_send_ordered) { if (!LIST_EMPTY(&softc->pending_ccbs)) { if ((softc->flags & DA_FLAG_WAS_OTAG) == 0) softc->flags |= DA_FLAG_NEED_OTAG; softc->flags &= ~DA_FLAG_WAS_OTAG; } } /* Queue us up again */ callout_reset(&softc->sendordered_c, (da_default_timeout * hz) / DA_ORDEREDTAG_INTERVAL, dasendorderedtag, periph); } /* * Step through all DA peripheral drivers, and if the device is still open, * sync the disk cache to physical media. */ static void dashutdown(void * arg, int howto) { struct cam_periph *periph; struct da_softc *softc; union ccb *ccb; int error; CAM_PERIPH_FOREACH(periph, &dadriver) { softc = (struct da_softc *)periph->softc; if (SCHEDULER_STOPPED()) { /* If we paniced with the lock held, do not recurse. */ if (!cam_periph_owned(periph) && (softc->flags & DA_FLAG_OPEN)) { dadump(softc->disk, NULL, 0, 0, 0); } continue; } cam_periph_lock(periph); /* * We only sync the cache if the drive is still open, and * if the drive is capable of it.. */ if (((softc->flags & DA_FLAG_OPEN) == 0) || (softc->quirks & DA_Q_NO_SYNC_CACHE)) { cam_periph_unlock(periph); continue; } ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL); scsi_synchronize_cache(&ccb->csio, /*retries*/0, /*cbfcnp*/NULL, MSG_SIMPLE_Q_TAG, /*begin_lba*/0, /* whole disk */ /*lb_count*/0, SSD_FULL_SIZE, 60 * 60 * 1000); error = cam_periph_runccb(ccb, daerror, /*cam_flags*/0, /*sense_flags*/ SF_NO_RECOVERY | SF_NO_RETRY | SF_QUIET_IR, softc->disk->d_devstat); if (error != 0) xpt_print(periph->path, "Synchronize cache failed\n"); xpt_release_ccb(ccb); cam_periph_unlock(periph); } } #else /* !_KERNEL */ /* * XXX These are only left out of the kernel build to silence warnings. If, * for some reason these functions are used in the kernel, the ifdefs should * be moved so they are included both in the kernel and userland. */ void scsi_format_unit(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, u_int8_t byte2, u_int16_t ileave, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, u_int32_t timeout) { struct scsi_format_unit *scsi_cmd; scsi_cmd = (struct scsi_format_unit *)&csio->cdb_io.cdb_bytes; scsi_cmd->opcode = FORMAT_UNIT; scsi_cmd->byte2 = byte2; scsi_ulto2b(ileave, scsi_cmd->interleave); cam_fill_csio(csio, retries, cbfcnp, /*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE, tag_action, data_ptr, dxfer_len, sense_len, sizeof(*scsi_cmd), timeout); } void scsi_read_defects(struct ccb_scsiio *csio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, uint8_t list_format, uint32_t addr_desc_index, uint8_t *data_ptr, uint32_t dxfer_len, int minimum_cmd_size, uint8_t sense_len, uint32_t timeout) { uint8_t cdb_len; /* * These conditions allow using the 10 byte command. Otherwise we * need to use the 12 byte command. */ if ((minimum_cmd_size <= 10) && (addr_desc_index == 0) && (dxfer_len <= SRDD10_MAX_LENGTH)) { struct scsi_read_defect_data_10 *cdb10; cdb10 = (struct scsi_read_defect_data_10 *) &csio->cdb_io.cdb_bytes; cdb_len = sizeof(*cdb10); bzero(cdb10, cdb_len); cdb10->opcode = READ_DEFECT_DATA_10; cdb10->format = list_format; scsi_ulto2b(dxfer_len, cdb10->alloc_length); } else { struct scsi_read_defect_data_12 *cdb12; cdb12 = (struct scsi_read_defect_data_12 *) &csio->cdb_io.cdb_bytes; cdb_len = sizeof(*cdb12); bzero(cdb12, cdb_len); cdb12->opcode = READ_DEFECT_DATA_12; cdb12->format = list_format; scsi_ulto4b(dxfer_len, cdb12->alloc_length); scsi_ulto4b(addr_desc_index, cdb12->address_descriptor_index); } cam_fill_csio(csio, retries, cbfcnp, /*flags*/ CAM_DIR_IN, tag_action, data_ptr, dxfer_len, sense_len, cdb_len, timeout); } void scsi_sanitize(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int8_t tag_action, u_int8_t byte2, u_int16_t control, u_int8_t *data_ptr, u_int32_t dxfer_len, u_int8_t sense_len, u_int32_t timeout) { struct scsi_sanitize *scsi_cmd; scsi_cmd = (struct scsi_sanitize *)&csio->cdb_io.cdb_bytes; scsi_cmd->opcode = SANITIZE; scsi_cmd->byte2 = byte2; scsi_cmd->control = control; scsi_ulto2b(dxfer_len, scsi_cmd->length); cam_fill_csio(csio, retries, cbfcnp, /*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE, tag_action, data_ptr, dxfer_len, sense_len, sizeof(*scsi_cmd), timeout); } #endif /* _KERNEL */ void scsi_zbc_out(struct ccb_scsiio *csio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, uint8_t service_action, uint64_t zone_id, uint8_t zone_flags, uint8_t *data_ptr, uint32_t dxfer_len, uint8_t sense_len, uint32_t timeout) { struct scsi_zbc_out *scsi_cmd; scsi_cmd = (struct scsi_zbc_out *)&csio->cdb_io.cdb_bytes; scsi_cmd->opcode = ZBC_OUT; scsi_cmd->service_action = service_action; scsi_u64to8b(zone_id, scsi_cmd->zone_id); scsi_cmd->zone_flags = zone_flags; cam_fill_csio(csio, retries, cbfcnp, /*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE, tag_action, data_ptr, dxfer_len, sense_len, sizeof(*scsi_cmd), timeout); } void scsi_zbc_in(struct ccb_scsiio *csio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, uint8_t service_action, uint64_t zone_start_lba, uint8_t zone_options, uint8_t *data_ptr, uint32_t dxfer_len, uint8_t sense_len, uint32_t timeout) { struct scsi_zbc_in *scsi_cmd; scsi_cmd = (struct scsi_zbc_in *)&csio->cdb_io.cdb_bytes; scsi_cmd->opcode = ZBC_IN; scsi_cmd->service_action = service_action; scsi_ulto4b(dxfer_len, scsi_cmd->length); scsi_u64to8b(zone_start_lba, scsi_cmd->zone_start_lba); scsi_cmd->zone_options = zone_options; cam_fill_csio(csio, retries, cbfcnp, /*flags*/ (dxfer_len > 0) ? CAM_DIR_IN : CAM_DIR_NONE, tag_action, data_ptr, dxfer_len, sense_len, sizeof(*scsi_cmd), timeout); } int scsi_ata_zac_mgmt_out(struct ccb_scsiio *csio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, int use_ncq, uint8_t zm_action, uint64_t zone_id, uint8_t zone_flags, uint8_t *data_ptr, uint32_t dxfer_len, uint8_t *cdb_storage, size_t cdb_storage_len, uint8_t sense_len, uint32_t timeout) { uint8_t command_out, protocol, ata_flags; uint16_t features_out; uint32_t sectors_out, auxiliary; int retval; retval = 0; if (use_ncq == 0) { command_out = ATA_ZAC_MANAGEMENT_OUT; features_out = (zm_action & 0xf) | (zone_flags << 8); ata_flags = AP_FLAG_BYT_BLOK_BLOCKS; if (dxfer_len == 0) { protocol = AP_PROTO_NON_DATA; ata_flags |= AP_FLAG_TLEN_NO_DATA; sectors_out = 0; } else { protocol = AP_PROTO_DMA; ata_flags |= AP_FLAG_TLEN_SECT_CNT | AP_FLAG_TDIR_TO_DEV; sectors_out = ((dxfer_len >> 9) & 0xffff); } auxiliary = 0; } else { ata_flags = AP_FLAG_BYT_BLOK_BLOCKS; if (dxfer_len == 0) { command_out = ATA_NCQ_NON_DATA; features_out = ATA_NCQ_ZAC_MGMT_OUT; /* * We're assuming the SCSI to ATA translation layer * will set the NCQ tag number in the tag field. * That isn't clear from the SAT-4 spec (as of rev 05). */ sectors_out = 0; ata_flags |= AP_FLAG_TLEN_NO_DATA; } else { command_out = ATA_SEND_FPDMA_QUEUED; /* * Note that we're defaulting to normal priority, * and assuming that the SCSI to ATA translation * layer will insert the NCQ tag number in the tag * field. That isn't clear in the SAT-4 spec (as * of rev 05). */ sectors_out = ATA_SFPDMA_ZAC_MGMT_OUT << 8; ata_flags |= AP_FLAG_TLEN_FEAT | AP_FLAG_TDIR_TO_DEV; /* * For SEND FPDMA QUEUED, the transfer length is * encoded in the FEATURE register, and 0 means * that 65536 512 byte blocks are to be tranferred. * In practice, it seems unlikely that we'll see * a transfer that large, and it may confuse the * the SAT layer, because generally that means that * 0 bytes should be transferred. */ if (dxfer_len == (65536 * 512)) { features_out = 0; } else if (dxfer_len <= (65535 * 512)) { features_out = ((dxfer_len >> 9) & 0xffff); } else { /* The transfer is too big. */ retval = 1; goto bailout; } } auxiliary = (zm_action & 0xf) | (zone_flags << 8); protocol = AP_PROTO_FPDMA; } protocol |= AP_EXTEND; retval = scsi_ata_pass(csio, retries, cbfcnp, /*flags*/ (dxfer_len > 0) ? CAM_DIR_OUT : CAM_DIR_NONE, tag_action, /*protocol*/ protocol, /*ata_flags*/ ata_flags, /*features*/ features_out, /*sector_count*/ sectors_out, /*lba*/ zone_id, /*command*/ command_out, /*device*/ 0, /*icc*/ 0, /*auxiliary*/ auxiliary, /*control*/ 0, /*data_ptr*/ data_ptr, /*dxfer_len*/ dxfer_len, /*cdb_storage*/ cdb_storage, /*cdb_storage_len*/ cdb_storage_len, /*minimum_cmd_size*/ 0, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ timeout); bailout: return (retval); } int scsi_ata_zac_mgmt_in(struct ccb_scsiio *csio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint8_t tag_action, int use_ncq, uint8_t zm_action, uint64_t zone_id, uint8_t zone_flags, uint8_t *data_ptr, uint32_t dxfer_len, uint8_t *cdb_storage, size_t cdb_storage_len, uint8_t sense_len, uint32_t timeout) { uint8_t command_out, protocol; uint16_t features_out, sectors_out; uint32_t auxiliary; int ata_flags; int retval; retval = 0; ata_flags = AP_FLAG_TDIR_FROM_DEV | AP_FLAG_BYT_BLOK_BLOCKS; if (use_ncq == 0) { command_out = ATA_ZAC_MANAGEMENT_IN; /* XXX KDM put a macro here */ features_out = (zm_action & 0xf) | (zone_flags << 8); sectors_out = dxfer_len >> 9; /* XXX KDM macro */ protocol = AP_PROTO_DMA; ata_flags |= AP_FLAG_TLEN_SECT_CNT; auxiliary = 0; } else { ata_flags |= AP_FLAG_TLEN_FEAT; command_out = ATA_RECV_FPDMA_QUEUED; sectors_out = ATA_RFPDMA_ZAC_MGMT_IN << 8; /* * For RECEIVE FPDMA QUEUED, the transfer length is * encoded in the FEATURE register, and 0 means * that 65536 512 byte blocks are to be tranferred. * In practice, it seems unlikely that we'll see * a transfer that large, and it may confuse the * the SAT layer, because generally that means that * 0 bytes should be transferred. */ if (dxfer_len == (65536 * 512)) { features_out = 0; } else if (dxfer_len <= (65535 * 512)) { features_out = ((dxfer_len >> 9) & 0xffff); } else { /* The transfer is too big. */ retval = 1; goto bailout; } auxiliary = (zm_action & 0xf) | (zone_flags << 8), protocol = AP_PROTO_FPDMA; } protocol |= AP_EXTEND; retval = scsi_ata_pass(csio, retries, cbfcnp, /*flags*/ CAM_DIR_IN, tag_action, /*protocol*/ protocol, /*ata_flags*/ ata_flags, /*features*/ features_out, /*sector_count*/ sectors_out, /*lba*/ zone_id, /*command*/ command_out, /*device*/ 0, /*icc*/ 0, /*auxiliary*/ auxiliary, /*control*/ 0, /*data_ptr*/ data_ptr, /*dxfer_len*/ (dxfer_len >> 9) * 512, /* XXX KDM */ /*cdb_storage*/ cdb_storage, /*cdb_storage_len*/ cdb_storage_len, /*minimum_cmd_size*/ 0, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ timeout); bailout: return (retval); } diff --git a/sys/cam/scsi/scsi_xpt.c b/sys/cam/scsi/scsi_xpt.c index 67b94488dff0..bdc23e4b51b7 100644 --- a/sys/cam/scsi/scsi_xpt.c +++ b/sys/cam/scsi/scsi_xpt.c @@ -1,3238 +1,3245 @@ /*- * Implementation of the SCSI Transport * * SPDX-License-Identifier: BSD-2-Clause-FreeBSD * * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs. * Copyright (c) 1997, 1998, 1999 Kenneth D. Merry. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for xpt_print below */ #include "opt_cam.h" struct scsi_quirk_entry { struct scsi_inquiry_pattern inq_pat; u_int8_t quirks; #define CAM_QUIRK_NOLUNS 0x01 #define CAM_QUIRK_NOVPDS 0x02 #define CAM_QUIRK_HILUNS 0x04 #define CAM_QUIRK_NOHILUNS 0x08 #define CAM_QUIRK_NORPTLUNS 0x10 u_int mintags; u_int maxtags; }; #define SCSI_QUIRK(dev) ((struct scsi_quirk_entry *)((dev)->quirk)) static int cam_srch_hi = 0; static int sysctl_cam_search_luns(SYSCTL_HANDLER_ARGS); SYSCTL_PROC(_kern_cam, OID_AUTO, cam_srch_hi, CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_NEEDGIANT, 0, 0, sysctl_cam_search_luns, "I", "allow search above LUN 7 for SCSI3 and greater devices"); #define CAM_SCSI2_MAXLUN 8 #define CAM_CAN_GET_SIMPLE_LUN(x, i) \ ((((x)->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) == \ RPL_LUNDATA_ATYP_PERIPH) || \ (((x)->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK) == \ RPL_LUNDATA_ATYP_FLAT)) #define CAM_GET_SIMPLE_LUN(lp, i, lval) \ if (((lp)->luns[(i)].lundata[0] & RPL_LUNDATA_ATYP_MASK) == \ RPL_LUNDATA_ATYP_PERIPH) { \ (lval) = (lp)->luns[(i)].lundata[1]; \ } else { \ (lval) = (lp)->luns[(i)].lundata[0]; \ (lval) &= RPL_LUNDATA_FLAT_LUN_MASK; \ (lval) <<= 8; \ (lval) |= (lp)->luns[(i)].lundata[1]; \ } #define CAM_GET_LUN(lp, i, lval) \ (lval) = scsi_8btou64((lp)->luns[(i)].lundata); \ (lval) = CAM_EXTLUN_BYTE_SWIZZLE(lval); /* * If we're not quirked to search <= the first 8 luns * and we are either quirked to search above lun 8, * or we're > SCSI-2 and we've enabled hilun searching, * or we're > SCSI-2 and the last lun was a success, * we can look for luns above lun 8. */ #define CAN_SRCH_HI_SPARSE(dv) \ (((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_NOHILUNS) == 0) \ && ((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_HILUNS) \ || (SID_ANSI_REV(&dv->inq_data) > SCSI_REV_2 && cam_srch_hi))) #define CAN_SRCH_HI_DENSE(dv) \ (((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_NOHILUNS) == 0) \ && ((SCSI_QUIRK(dv)->quirks & CAM_QUIRK_HILUNS) \ || (SID_ANSI_REV(&dv->inq_data) > SCSI_REV_2))) static periph_init_t probe_periph_init; static struct periph_driver probe_driver = { probe_periph_init, "probe", TAILQ_HEAD_INITIALIZER(probe_driver.units), /* generation */ 0, CAM_PERIPH_DRV_EARLY }; PERIPHDRIVER_DECLARE(probe, probe_driver); typedef enum { PROBE_TUR, PROBE_INQUIRY, /* this counts as DV0 for Basic Domain Validation */ PROBE_FULL_INQUIRY, PROBE_REPORT_LUNS, PROBE_MODE_SENSE, PROBE_SUPPORTED_VPD_LIST, PROBE_DEVICE_ID, PROBE_EXTENDED_INQUIRY, PROBE_SERIAL_NUM, PROBE_TUR_FOR_NEGOTIATION, PROBE_INQUIRY_BASIC_DV1, PROBE_INQUIRY_BASIC_DV2, PROBE_DV_EXIT, PROBE_DONE, PROBE_INVALID } probe_action; static char *probe_action_text[] = { "PROBE_TUR", "PROBE_INQUIRY", "PROBE_FULL_INQUIRY", "PROBE_REPORT_LUNS", "PROBE_MODE_SENSE", "PROBE_SUPPORTED_VPD_LIST", "PROBE_DEVICE_ID", "PROBE_EXTENDED_INQUIRY", "PROBE_SERIAL_NUM", "PROBE_TUR_FOR_NEGOTIATION", "PROBE_INQUIRY_BASIC_DV1", "PROBE_INQUIRY_BASIC_DV2", "PROBE_DV_EXIT", "PROBE_DONE", "PROBE_INVALID" }; #define PROBE_SET_ACTION(softc, newaction) \ do { \ char **text; \ text = probe_action_text; \ CAM_DEBUG((softc)->periph->path, CAM_DEBUG_PROBE, \ ("Probe %s to %s\n", text[(softc)->action], \ text[(newaction)])); \ (softc)->action = (newaction); \ } while(0) typedef enum { PROBE_INQUIRY_CKSUM = 0x01, PROBE_SERIAL_CKSUM = 0x02, PROBE_NO_ANNOUNCE = 0x04, PROBE_EXTLUN = 0x08 } probe_flags; typedef struct { TAILQ_HEAD(, ccb_hdr) request_ccbs; probe_action action; union ccb saved_ccb; probe_flags flags; MD5_CTX context; u_int8_t digest[16]; struct cam_periph *periph; } probe_softc; static const char quantum[] = "QUANTUM"; static const char sony[] = "SONY"; static const char west_digital[] = "WDIGTL"; static const char samsung[] = "SAMSUNG"; static const char seagate[] = "SEAGATE"; static const char microp[] = "MICROP"; static struct scsi_quirk_entry scsi_quirk_table[] = { { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP39100*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP34550*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "XP32275*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, microp, "4421-07*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "HP", "C372*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, microp, "3391*", "x43h" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Unfortunately, the Quantum Atlas III has the same * problem as the Atlas II drives above. * Reported by: "Johan Granlund" * * For future reference, the drive with the problem was: * QUANTUM QM39100TD-SW N1B0 * * It's possible that Quantum will fix the problem in later * firmware revisions. If that happens, the quirk entry * will need to be made specific to the firmware revisions * with the problem. * */ /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "QM39100*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* * 18 Gig Atlas III, same problem as the 9G version. * Reported by: Andre Albsmeier * * * For future reference, the drive with the problem was: * QUANTUM QM318000TD-S N491 */ /* Reports QUEUE FULL for temporary resource shortages */ { T_DIRECT, SIP_MEDIA_FIXED, quantum, "QM318000*", "*" }, /*quirks*/0, /*mintags*/24, /*maxtags*/32 }, { /* * Broken tagged queuing drive * Reported by: Bret Ford * and: Martin Renters */ { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST410800*", "71*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, /* * The Seagate Medalist Pro drives have very poor write * performance with anything more than 2 tags. * * Reported by: Paul van der Zwan * Drive: * * Reported by: Jeremy Lea * Drive: * * No one has actually reported that the 9G version * (ST39140*) of the Medalist Pro has the same problem, but * we're assuming that it does because the 4G and 6.5G * versions of the drive are broken. */ { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST34520*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST36530*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST39140*", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/2 }, { /* * Experiences command timeouts under load with a * tag count higher than 55. */ { T_DIRECT, SIP_MEDIA_FIXED, seagate, "ST3146855LW", "*"}, /*quirks*/0, /*mintags*/2, /*maxtags*/55 }, { /* * Slow when tagged queueing is enabled. Write performance * steadily drops off with more and more concurrent * transactions. Best sequential write performance with * tagged queueing turned off and write caching turned on. * * PR: kern/10398 * Submitted by: Hideaki Okada * Drive: DCAS-34330 w/ "S65A" firmware. * * The drive with the problem had the "S65A" firmware * revision, and has also been reported (by Stephen J. * Roznowski ) for a drive with the "S61A" * firmware revision. * * Although no one has reported problems with the 2 gig * version of the DCAS drive, the assumption is that it * has the same problems as the 4 gig version. Therefore * this quirk entries disables tagged queueing for all * DCAS drives. */ { T_DIRECT, SIP_MEDIA_FIXED, "IBM", "DCAS*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_REMOVABLE, "iomega", "jaz*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* Broken tagged queuing drive */ { T_DIRECT, SIP_MEDIA_FIXED, "CONNER", "CFP2107*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* This does not support other than LUN 0 */ { T_DIRECT, SIP_MEDIA_FIXED, "VMware*", "*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/2, /*maxtags*/255 }, { /* * Broken tagged queuing drive. * Submitted by: * NAKAJI Hiroyuki * in PR kern/9535 */ { T_DIRECT, SIP_MEDIA_FIXED, samsung, "WN34324U*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Slow when tagged queueing is enabled. (1.5MB/sec versus * 8MB/sec.) * Submitted by: Andrew Gallatin * Best performance with these drives is achieved with * tagged queueing turned off, and write caching turned on. */ { T_DIRECT, SIP_MEDIA_FIXED, west_digital, "WDE*", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Slow when tagged queueing is enabled. (1.5MB/sec versus * 8MB/sec.) * Submitted by: Andrew Gallatin * Best performance with these drives is achieved with * tagged queueing turned off, and write caching turned on. */ { T_DIRECT, SIP_MEDIA_FIXED, west_digital, "ENTERPRISE", "*" }, /*quirks*/0, /*mintags*/0, /*maxtags*/0 }, { /* * Doesn't handle queue full condition correctly, * so we need to limit maxtags to what the device * can handle instead of determining this automatically. */ { T_DIRECT, SIP_MEDIA_FIXED, samsung, "WN321010S*", "*" }, /*quirks*/0, /*mintags*/2, /*maxtags*/32 }, { /* Really only one LUN */ { T_ENCLOSURE, SIP_MEDIA_FIXED, "SUN", "SENA", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* I can't believe we need a quirk for DPT volumes. */ { T_ANY, SIP_MEDIA_FIXED|SIP_MEDIA_REMOVABLE, "DPT", "*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/255 }, { /* * Many Sony CDROM drives don't like multi-LUN probing. */ { T_CDROM, SIP_MEDIA_REMOVABLE, sony, "CD-ROM CDU*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * This drive doesn't like multiple LUN probing. * Submitted by: Parag Patel */ { T_WORM, SIP_MEDIA_REMOVABLE, sony, "CD-R CDU9*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { { T_WORM, SIP_MEDIA_REMOVABLE, "YAMAHA", "CDR100*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * The 8200 doesn't like multi-lun probing, and probably * don't like serial number requests either. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "EXABYTE", "EXB-8200*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * Let's try the same as above, but for a drive that says * it's an IPL-6860 but is actually an EXB 8200. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "EXABYTE", "IPL-6860*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * These Hitachi drives don't like multi-lun probing. * The PR submitter has a DK319H, but says that the Linux * kernel has a similar work-around for the DK312 and DK314, * so all DK31* drives are quirked here. * PR: misc/18793 * Submitted by: Paul Haddad */ { T_DIRECT, SIP_MEDIA_FIXED, "HITACHI", "DK31*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/2, /*maxtags*/255 }, { /* * The Hitachi CJ series with J8A8 firmware apparently has * problems with tagged commands. * PR: 23536 * Reported by: amagai@nue.org */ { T_DIRECT, SIP_MEDIA_FIXED, "HITACHI", "DK32CJ*", "J8A8" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * These are the large storage arrays. * Submitted by: William Carrel */ { T_DIRECT, SIP_MEDIA_FIXED, "HITACHI", "OPEN*", "*" }, CAM_QUIRK_HILUNS, 2, 1024 }, { /* * This old revision of the TDC3600 is also SCSI-1, and * hangs upon serial number probing. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "TANDBERG", " TDC 3600", "U07:" }, CAM_QUIRK_NOVPDS, /*mintags*/0, /*maxtags*/0 }, { /* * Would repond to all LUNs if asked for. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "CALIPER", "CP150", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* * Would repond to all LUNs if asked for. */ { T_SEQUENTIAL, SIP_MEDIA_REMOVABLE, "KENNEDY", "96X2*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* Submitted by: Matthew Dodd */ { T_PROCESSOR, SIP_MEDIA_FIXED, "Cabletrn", "EA41*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* Submitted by: Matthew Dodd */ { T_PROCESSOR, SIP_MEDIA_FIXED, "CABLETRN", "EA41*", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* TeraSolutions special settings for TRC-22 RAID */ { T_DIRECT, SIP_MEDIA_FIXED, "TERASOLU", "TRC-22", "*" }, /*quirks*/0, /*mintags*/55, /*maxtags*/255 }, { /* Veritas Storage Appliance */ { T_DIRECT, SIP_MEDIA_FIXED, "VERITAS", "*", "*" }, CAM_QUIRK_HILUNS, /*mintags*/2, /*maxtags*/1024 }, { /* * Would respond to all LUNs. Device type and removable * flag are jumper-selectable. */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, "MaxOptix", "Tahiti 1", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { /* EasyRAID E5A aka. areca ARC-6010 */ { T_DIRECT, SIP_MEDIA_FIXED, "easyRAID", "*", "*" }, CAM_QUIRK_NOHILUNS, /*mintags*/2, /*maxtags*/255 }, { { T_ENCLOSURE, SIP_MEDIA_FIXED, "DP", "BACKPLANE", "*" }, CAM_QUIRK_NOLUNS, /*mintags*/0, /*maxtags*/0 }, { { T_DIRECT, SIP_MEDIA_REMOVABLE, "Garmin", "*", "*" }, CAM_QUIRK_NORPTLUNS, /*mintags*/2, /*maxtags*/255 }, { { T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic", "STORAGE DEVICE*", "120?" }, CAM_QUIRK_NORPTLUNS, /*mintags*/2, /*maxtags*/255 }, { { T_DIRECT, SIP_MEDIA_REMOVABLE, "Generic", "MassStorageClass", "1533" }, CAM_QUIRK_NORPTLUNS, /*mintags*/2, /*maxtags*/255 }, { /* Default tagged queuing parameters for all devices */ { T_ANY, SIP_MEDIA_REMOVABLE|SIP_MEDIA_FIXED, /*vendor*/"*", /*product*/"*", /*revision*/"*" }, /*quirks*/0, /*mintags*/2, /*maxtags*/255 }, }; static cam_status proberegister(struct cam_periph *periph, void *arg); static void probeschedule(struct cam_periph *probe_periph); static void probestart(struct cam_periph *periph, union ccb *start_ccb); static void proberequestdefaultnegotiation(struct cam_periph *periph); static int proberequestbackoff(struct cam_periph *periph, struct cam_ed *device); static void probedone(struct cam_periph *periph, union ccb *done_ccb); static void probe_purge_old(struct cam_path *path, struct scsi_report_luns_data *new, probe_flags flags); static void probecleanup(struct cam_periph *periph); static void scsi_find_quirk(struct cam_ed *device); static void scsi_scan_bus(struct cam_periph *periph, union ccb *ccb); static void scsi_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *ccb); static void xptscandone(struct cam_periph *periph, union ccb *done_ccb); static struct cam_ed * scsi_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id); static void scsi_devise_transport(struct cam_path *path); static void scsi_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_path *path, int async_update); static void scsi_toggle_tags(struct cam_path *path); static void scsi_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg); static void scsi_action(union ccb *start_ccb); static void scsi_announce_periph(struct cam_periph *periph); static void scsi_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb); static void scsi_proto_announce(struct cam_ed *device); static void scsi_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb); static void scsi_proto_denounce(struct cam_ed *device); static void scsi_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb); static void scsi_proto_debug_out(union ccb *ccb); static void _scsi_announce_periph(struct cam_periph *, u_int *, u_int *, struct ccb_trans_settings *); static struct xpt_xport_ops scsi_xport_ops = { .alloc_device = scsi_alloc_device, .action = scsi_action, .async = scsi_dev_async, .announce = scsi_announce_periph, .announce_sbuf = scsi_announce_periph_sbuf, }; #define SCSI_XPT_XPORT(x, X) \ static struct xpt_xport scsi_xport_ ## x = { \ .xport = XPORT_ ## X, \ .name = #x, \ .ops = &scsi_xport_ops, \ }; \ CAM_XPT_XPORT(scsi_xport_ ## x); SCSI_XPT_XPORT(spi, SPI); SCSI_XPT_XPORT(sas, SAS); SCSI_XPT_XPORT(fc, FC); SCSI_XPT_XPORT(usb, USB); SCSI_XPT_XPORT(iscsi, ISCSI); SCSI_XPT_XPORT(srp, SRP); SCSI_XPT_XPORT(ppb, PPB); #undef SCSI_XPORT_XPORT static struct xpt_proto_ops scsi_proto_ops = { .announce = scsi_proto_announce, .announce_sbuf = scsi_proto_announce_sbuf, .denounce = scsi_proto_denounce, .denounce_sbuf = scsi_proto_denounce_sbuf, .debug_out = scsi_proto_debug_out, }; static struct xpt_proto scsi_proto = { .proto = PROTO_SCSI, .name = "scsi", .ops = &scsi_proto_ops, }; CAM_XPT_PROTO(scsi_proto); static void probe_periph_init(void) { } static cam_status proberegister(struct cam_periph *periph, void *arg) { union ccb *request_ccb; /* CCB representing the probe request */ probe_softc *softc; request_ccb = (union ccb *)arg; if (request_ccb == NULL) { printf("proberegister: no probe CCB, " "can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (probe_softc *)malloc(sizeof(*softc), M_CAMXPT, M_NOWAIT); if (softc == NULL) { printf("proberegister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } TAILQ_INIT(&softc->request_ccbs); TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); softc->flags = 0; periph->softc = softc; softc->periph = periph; softc->action = PROBE_INVALID; if (cam_periph_acquire(periph) != 0) return (CAM_REQ_CMP_ERR); CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe started\n")); scsi_devise_transport(periph->path); /* * Ensure we've waited at least a bus settle * delay before attempting to probe the device. * For HBAs that don't do bus resets, this won't make a difference. */ cam_periph_freeze_after_event(periph, &periph->path->bus->last_reset, scsi_delay); probeschedule(periph); return(CAM_REQ_CMP); } static void probeschedule(struct cam_periph *periph) { struct ccb_pathinq cpi; union ccb *ccb; probe_softc *softc; softc = (probe_softc *)periph->softc; ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); xpt_path_inq(&cpi, periph->path); /* * If a device has gone away and another device, or the same one, * is back in the same place, it should have a unit attention * condition pending. It will not report the unit attention in * response to an inquiry, which may leave invalid transfer * negotiations in effect. The TUR will reveal the unit attention * condition. Only send the TUR for lun 0, since some devices * will get confused by commands other than inquiry to non-existent * luns. If you think a device has gone away start your scan from * lun 0. This will insure that any bogus transfer settings are * invalidated. * * If we haven't seen the device before and the controller supports * some kind of transfer negotiation, negotiate with the first * sent command if no bus reset was performed at startup. This * ensures that the device is not confused by transfer negotiation * settings left over by loader or BIOS action. */ if (((ccb->ccb_h.path->device->flags & CAM_DEV_UNCONFIGURED) == 0) && (ccb->ccb_h.target_lun == 0)) { PROBE_SET_ACTION(softc, PROBE_TUR); } else if ((cpi.hba_inquiry & (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE)) != 0 && (cpi.hba_misc & PIM_NOBUSRESET) != 0) { proberequestdefaultnegotiation(periph); PROBE_SET_ACTION(softc, PROBE_INQUIRY); } else { PROBE_SET_ACTION(softc, PROBE_INQUIRY); } if (ccb->crcn.flags & CAM_EXPECT_INQ_CHANGE) softc->flags |= PROBE_NO_ANNOUNCE; else softc->flags &= ~PROBE_NO_ANNOUNCE; if (cpi.hba_misc & PIM_EXTLUNS) softc->flags |= PROBE_EXTLUN; else softc->flags &= ~PROBE_EXTLUN; xpt_schedule(periph, CAM_PRIORITY_XPT); } static void probestart(struct cam_periph *periph, union ccb *start_ccb) { /* Probe the device that our peripheral driver points to */ struct ccb_scsiio *csio; probe_softc *softc; CAM_DEBUG(start_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("probestart\n")); softc = (probe_softc *)periph->softc; csio = &start_ccb->csio; again: switch (softc->action) { case PROBE_TUR: case PROBE_TUR_FOR_NEGOTIATION: case PROBE_DV_EXIT: { scsi_test_unit_ready(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/60000); break; } case PROBE_INQUIRY: case PROBE_FULL_INQUIRY: case PROBE_INQUIRY_BASIC_DV1: case PROBE_INQUIRY_BASIC_DV2: { u_int inquiry_len; struct scsi_inquiry_data *inq_buf; inq_buf = &periph->path->device->inq_data; /* * If the device is currently configured, we calculate an * MD5 checksum of the inquiry data, and if the serial number * length is greater than 0, add the serial number data * into the checksum as well. Once the inquiry and the * serial number check finish, we attempt to figure out * whether we still have the same device. */ if (((periph->path->device->flags & CAM_DEV_UNCONFIGURED) == 0) && ((softc->flags & PROBE_INQUIRY_CKSUM) == 0)) { MD5Init(&softc->context); MD5Update(&softc->context, (unsigned char *)inq_buf, sizeof(struct scsi_inquiry_data)); softc->flags |= PROBE_INQUIRY_CKSUM; if (periph->path->device->serial_num_len > 0) { MD5Update(&softc->context, periph->path->device->serial_num, periph->path->device->serial_num_len); softc->flags |= PROBE_SERIAL_CKSUM; } MD5Final(softc->digest, &softc->context); } if (softc->action == PROBE_INQUIRY) inquiry_len = SHORT_INQUIRY_LENGTH; else inquiry_len = SID_ADDITIONAL_LENGTH(inq_buf); /* * Some parallel SCSI devices fail to send an * ignore wide residue message when dealing with * odd length inquiry requests. Round up to be * safe. */ inquiry_len = roundup2(inquiry_len, 2); if (softc->action == PROBE_INQUIRY_BASIC_DV1 || softc->action == PROBE_INQUIRY_BASIC_DV2) { inq_buf = malloc(inquiry_len, M_CAMXPT, M_NOWAIT); } if (inq_buf == NULL) { xpt_print(periph->path, "malloc failure- skipping Basic" "Domain Validation\n"); PROBE_SET_ACTION(softc, PROBE_DV_EXIT); scsi_test_unit_ready(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, SSD_FULL_SIZE, /*timeout*/60000); break; } scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)inq_buf, inquiry_len, /*evpd*/FALSE, /*page_code*/0, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } case PROBE_REPORT_LUNS: { void *rp; rp = malloc(periph->path->target->rpl_size, M_CAMXPT, M_NOWAIT | M_ZERO); if (rp == NULL) { struct scsi_inquiry_data *inq_buf; inq_buf = &periph->path->device->inq_data; xpt_print(periph->path, "Unable to alloc report luns storage\n"); if (INQ_DATA_TQ_ENABLED(inq_buf)) PROBE_SET_ACTION(softc, PROBE_MODE_SENSE); else PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); goto again; } scsi_report_luns(csio, 5, probedone, MSG_SIMPLE_Q_TAG, RPL_REPORT_DEFAULT, rp, periph->path->target->rpl_size, SSD_FULL_SIZE, 60000); break; break; } case PROBE_MODE_SENSE: { void *mode_buf; int mode_buf_len; mode_buf_len = sizeof(struct scsi_mode_header_6) + sizeof(struct scsi_mode_blk_desc) + sizeof(struct scsi_control_page); mode_buf = malloc(mode_buf_len, M_CAMXPT, M_NOWAIT); if (mode_buf != NULL) { scsi_mode_sense(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, /*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SMS_CONTROL_MODE_PAGE, mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60000); break; } xpt_print(periph->path, "Unable to mode sense control page - " "malloc failure\n"); PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); } /* FALLTHROUGH */ case PROBE_SUPPORTED_VPD_LIST: { struct scsi_vpd_supported_page_list *vpd_list; struct cam_ed *device; vpd_list = NULL; device = periph->path->device; if ((SCSI_QUIRK(device)->quirks & CAM_QUIRK_NOVPDS) == 0) vpd_list = malloc(sizeof(*vpd_list), M_CAMXPT, M_NOWAIT | M_ZERO); if (vpd_list != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)vpd_list, sizeof(*vpd_list), /*evpd*/TRUE, SVPD_SUPPORTED_PAGE_LIST, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } done: /* * We'll have to do without, let our probedone * routine finish up for us. */ start_ccb->csio.data_ptr = NULL; cam_freeze_devq(periph->path); cam_periph_doacquire(periph); probedone(periph, start_ccb); return; } case PROBE_DEVICE_ID: { struct scsi_vpd_device_id *devid; devid = NULL; if (scsi_vpd_supported_page(periph, SVPD_DEVICE_ID)) devid = malloc(SVPD_DEVICE_ID_MAX_SIZE, M_CAMXPT, M_NOWAIT | M_ZERO); if (devid != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (uint8_t *)devid, SVPD_DEVICE_ID_MAX_SIZE, /*evpd*/TRUE, SVPD_DEVICE_ID, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } goto done; } case PROBE_EXTENDED_INQUIRY: { struct scsi_vpd_extended_inquiry_data *ext_inq; ext_inq = NULL; if (scsi_vpd_supported_page(periph, SVPD_EXTENDED_INQUIRY_DATA)) ext_inq = malloc(sizeof(*ext_inq), M_CAMXPT, M_NOWAIT | M_ZERO); if (ext_inq != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (uint8_t *)ext_inq, sizeof(*ext_inq), /*evpd*/TRUE, SVPD_EXTENDED_INQUIRY_DATA, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } /* * We'll have to do without, let our probedone * routine finish up for us. */ goto done; } case PROBE_SERIAL_NUM: { struct scsi_vpd_unit_serial_number *serial_buf; struct cam_ed* device; serial_buf = NULL; device = periph->path->device; if (device->serial_num != NULL) { free(device->serial_num, M_CAMXPT); device->serial_num = NULL; device->serial_num_len = 0; } if (scsi_vpd_supported_page(periph, SVPD_UNIT_SERIAL_NUMBER)) serial_buf = (struct scsi_vpd_unit_serial_number *) malloc(sizeof(*serial_buf), M_CAMXPT, M_NOWAIT|M_ZERO); if (serial_buf != NULL) { scsi_inquiry(csio, /*retries*/4, probedone, MSG_SIMPLE_Q_TAG, (u_int8_t *)serial_buf, sizeof(*serial_buf), /*evpd*/TRUE, SVPD_UNIT_SERIAL_NUMBER, SSD_MIN_SIZE, /*timeout*/60 * 1000); break; } goto done; } default: panic("probestart: invalid action state 0x%x\n", softc->action); } start_ccb->ccb_h.flags |= CAM_DEV_QFREEZE; cam_periph_doacquire(periph); xpt_action(start_ccb); } static void proberequestdefaultnegotiation(struct cam_periph *periph) { struct ccb_trans_settings cts; memset(&cts, 0, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_USER_SETTINGS; xpt_action((union ccb *)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) { return; } cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); } /* * Backoff Negotiation Code- only pertinent for SPI devices. */ static int proberequestbackoff(struct cam_periph *periph, struct cam_ed *device) { struct ccb_trans_settings cts; struct ccb_trans_settings_spi *spi; memset(&cts, 0, sizeof (cts)); xpt_setup_ccb(&cts.ccb_h, periph->path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) { if (bootverbose) { xpt_print(periph->path, "failed to get current device settings\n"); } return (0); } if (cts.transport != XPORT_SPI) { if (bootverbose) { xpt_print(periph->path, "not SPI transport\n"); } return (0); } spi = &cts.xport_specific.spi; /* * We cannot renegotiate sync rate if we don't have one. */ if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) { if (bootverbose) { xpt_print(periph->path, "no sync rate known\n"); } return (0); } /* * We'll assert that we don't have to touch PPR options- the * SIM will see what we do with period and offset and adjust * the PPR options as appropriate. */ /* * A sync rate with unknown or zero offset is nonsensical. * A sync period of zero means Async. */ if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0 || spi->sync_offset == 0 || spi->sync_period == 0) { if (bootverbose) { xpt_print(periph->path, "no sync rate available\n"); } return (0); } if (device->flags & CAM_DEV_DV_HIT_BOTTOM) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("hit async: giving up on DV\n")); return (0); } /* * Jump sync_period up by one, but stop at 5MHz and fall back to Async. * We don't try to remember 'last' settings to see if the SIM actually * gets into the speed we want to set. We check on the SIM telling * us that a requested speed is bad, but otherwise don't try and * check the speed due to the asynchronous and handshake nature * of speed setting. */ spi->valid = CTS_SPI_VALID_SYNC_RATE | CTS_SPI_VALID_SYNC_OFFSET; for (;;) { spi->sync_period++; if (spi->sync_period >= 0xf) { spi->sync_period = 0; spi->sync_offset = 0; CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("setting to async for DV\n")); /* * Once we hit async, we don't want to try * any more settings. */ device->flags |= CAM_DEV_DV_HIT_BOTTOM; } else if (bootverbose) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("DV: period 0x%x\n", spi->sync_period)); printf("setting period to 0x%x\n", spi->sync_period); } cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb *)&cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) { break; } CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("DV: failed to set period 0x%x\n", spi->sync_period)); if (spi->sync_period == 0) { return (0); } } return (1); } #define CCB_COMPLETED_OK(ccb) (((ccb).status & CAM_STATUS_MASK) == CAM_REQ_CMP) static void probedone(struct cam_periph *periph, union ccb *done_ccb) { probe_softc *softc; struct cam_path *path; struct scsi_inquiry_data *inq_buf; u_int32_t priority; CAM_DEBUG(done_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("probedone\n")); softc = (probe_softc *)periph->softc; path = done_ccb->ccb_h.path; priority = done_ccb->ccb_h.pinfo.priority; cam_periph_assert(periph, MA_OWNED); switch (softc->action) { case PROBE_TUR: { if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, SF_NO_PRINT) == ERESTART) { outr: /* Drop freeze taken due to CAM_DEV_QFREEZE */ cam_release_devq(path, 0, 0, 0, FALSE); return; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } PROBE_SET_ACTION(softc, PROBE_INQUIRY); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); out: /* Drop freeze taken due to CAM_DEV_QFREEZE and release. */ cam_release_devq(path, 0, 0, 0, FALSE); cam_periph_release_locked(periph); return; } case PROBE_INQUIRY: case PROBE_FULL_INQUIRY: { if (cam_ccb_status(done_ccb) == CAM_REQ_CMP) { u_int8_t periph_qual; path->device->flags |= CAM_DEV_INQUIRY_DATA_VALID; scsi_find_quirk(path->device); inq_buf = &path->device->inq_data; periph_qual = SID_QUAL(inq_buf); if (periph_qual == SID_QUAL_LU_CONNECTED || periph_qual == SID_QUAL_LU_OFFLINE) { /* * We conservatively request only * SHORT_INQUIRY_LEN bytes of inquiry * information during our first try * at sending an INQUIRY. If the device * has more information to give, * perform a second request specifying * the amount of information the device * is willing to give. */ if (softc->action == PROBE_INQUIRY && SID_ADDITIONAL_LENGTH(inq_buf) > SHORT_INQUIRY_LENGTH) { PROBE_SET_ACTION(softc, PROBE_FULL_INQUIRY); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } scsi_devise_transport(path); if (path->device->lun_id == 0 && SID_ANSI_REV(inq_buf) > SCSI_REV_SPC2 && (SCSI_QUIRK(path->device)->quirks & CAM_QUIRK_NORPTLUNS) == 0) { PROBE_SET_ACTION(softc, PROBE_REPORT_LUNS); /* * Start with room for *one* lun. */ periph->path->target->rpl_size = 16; } else if (INQ_DATA_TQ_ENABLED(inq_buf)) PROBE_SET_ACTION(softc, PROBE_MODE_SENSE); else PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } else if (path->device->lun_id == 0 && SID_ANSI_REV(inq_buf) >= SCSI_REV_SPC2 && (SCSI_QUIRK(path->device)->quirks & CAM_QUIRK_NORPTLUNS) == 0) { PROBE_SET_ACTION(softc, PROBE_REPORT_LUNS); periph->path->target->rpl_size = 16; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } } else if (cam_periph_error(done_ccb, 0, done_ccb->ccb_h.target_lun > 0 ? SF_RETRY_UA|SF_QUIET_IR : SF_RETRY_UA) == ERESTART) { goto outr; } else { if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } path->device->flags &= ~CAM_DEV_INQUIRY_DATA_VALID; } /* * If we get to this point, we got an error status back * from the inquiry and the error status doesn't require * automatically retrying the command. Therefore, the * inquiry failed. If we had inquiry information before * for this device, but this latest inquiry command failed, * the device has probably gone away. If this device isn't * already marked unconfigured, notify the peripheral * drivers that this device is no more. */ if ((path->device->flags & CAM_DEV_UNCONFIGURED) == 0) /* Send the async notification. */ xpt_async(AC_LOST_DEVICE, path, NULL); PROBE_SET_ACTION(softc, PROBE_INVALID); xpt_release_ccb(done_ccb); break; } case PROBE_REPORT_LUNS: { struct ccb_scsiio *csio; struct scsi_report_luns_data *lp; u_int nlun, maxlun; csio = &done_ccb->csio; lp = (struct scsi_report_luns_data *)csio->data_ptr; nlun = scsi_4btoul(lp->length) / 8; maxlun = (csio->dxfer_len / 8) - 1; if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, done_ccb->ccb_h.target_lun > 0 ? SF_RETRY_UA|SF_QUIET_IR : SF_RETRY_UA) == ERESTART) { goto outr; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { xpt_release_devq(done_ccb->ccb_h.path, 1, TRUE); } free(lp, M_CAMXPT); lp = NULL; } else if (nlun > maxlun) { /* * Reallocate and retry to cover all luns */ CAM_DEBUG(path, CAM_DEBUG_PROBE, ("Probe: reallocating REPORT_LUNS for %u luns\n", nlun)); free(lp, M_CAMXPT); path->target->rpl_size = (nlun << 3) + 8; xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } else if (nlun == 0) { /* * If there don't appear to be any luns, bail. */ free(lp, M_CAMXPT); lp = NULL; } else { lun_id_t lun; int idx; CAM_DEBUG(path, CAM_DEBUG_PROBE, ("Probe: %u lun(s) reported\n", nlun)); CAM_GET_LUN(lp, 0, lun); /* * If the first lun is not lun 0, then either there * is no lun 0 in the list, or the list is unsorted. */ if (lun != 0) { for (idx = 0; idx < nlun; idx++) { CAM_GET_LUN(lp, idx, lun); if (lun == 0) { break; } } if (idx != nlun) { uint8_t tlun[8]; memcpy(tlun, lp->luns[0].lundata, 8); memcpy(lp->luns[0].lundata, lp->luns[idx].lundata, 8); memcpy(lp->luns[idx].lundata, tlun, 8); CAM_DEBUG(path, CAM_DEBUG_PROBE, ("lun 0 in position %u\n", idx)); } } /* * If we have an old lun list, We can either * retest luns that appear to have been dropped, * or just nuke them. We'll opt for the latter. * This function will also install the new list * in the target structure. */ probe_purge_old(path, lp, softc->flags); lp = NULL; } /* The processing above should either exit via a `goto * out` or leave the `lp` variable `NULL` and (if * applicable) `free()` the storage to which it had * pointed. Assert here that is the case. */ KASSERT(lp == NULL, ("%s: lp is not NULL", __func__)); inq_buf = &path->device->inq_data; if (path->device->flags & CAM_DEV_INQUIRY_DATA_VALID && (SID_QUAL(inq_buf) == SID_QUAL_LU_CONNECTED || SID_QUAL(inq_buf) == SID_QUAL_LU_OFFLINE)) { if (INQ_DATA_TQ_ENABLED(inq_buf)) PROBE_SET_ACTION(softc, PROBE_MODE_SENSE); else PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } PROBE_SET_ACTION(softc, PROBE_INVALID); xpt_release_ccb(done_ccb); break; } case PROBE_MODE_SENSE: { struct ccb_scsiio *csio; struct scsi_mode_header_6 *mode_hdr; csio = &done_ccb->csio; mode_hdr = (struct scsi_mode_header_6 *)csio->data_ptr; if (cam_ccb_status(done_ccb) == CAM_REQ_CMP) { struct scsi_control_page *page; u_int8_t *offset; offset = ((u_int8_t *)&mode_hdr[1]) + mode_hdr->blk_desc_len; page = (struct scsi_control_page *)offset; path->device->queue_flags = page->queue_flags; } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT) == ERESTART) { goto outr; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } xpt_release_ccb(done_ccb); free(mode_hdr, M_CAMXPT); PROBE_SET_ACTION(softc, PROBE_SUPPORTED_VPD_LIST); xpt_schedule(periph, priority); goto out; } case PROBE_SUPPORTED_VPD_LIST: { struct ccb_scsiio *csio; struct scsi_vpd_supported_page_list *page_list; csio = &done_ccb->csio; page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; if (path->device->supported_vpds != NULL) { free(path->device->supported_vpds, M_CAMXPT); path->device->supported_vpds = NULL; path->device->supported_vpds_len = 0; } if (page_list == NULL) { /* * Don't process the command as it was never sent */ } else if (CCB_COMPLETED_OK(csio->ccb_h)) { /* Got vpd list */ path->device->supported_vpds_len = page_list->length + SVPD_SUPPORTED_PAGES_HDR_LEN; path->device->supported_vpds = (uint8_t *)page_list; xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_DEVICE_ID); xpt_schedule(periph, priority); goto out; } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT) == ERESTART) { goto outr; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } if (page_list) free(page_list, M_CAMXPT); /* No VPDs available, skip to device check. */ csio->data_ptr = NULL; goto probe_device_check; } case PROBE_DEVICE_ID: { struct scsi_vpd_device_id *devid; struct ccb_scsiio *csio; uint32_t length = 0; csio = &done_ccb->csio; devid = (struct scsi_vpd_device_id *)csio->data_ptr; /* Clean up from previous instance of this device */ if (path->device->device_id != NULL) { path->device->device_id_len = 0; free(path->device->device_id, M_CAMXPT); path->device->device_id = NULL; } if (devid == NULL) { /* Don't process the command as it was never sent */ } else if (CCB_COMPLETED_OK(csio->ccb_h)) { length = scsi_2btoul(devid->length); if (length != 0) { /* * NB: device_id_len is actual response * size, not buffer size. */ path->device->device_id_len = length + SVPD_DEVICE_ID_HDR_LEN; path->device->device_id = (uint8_t *)devid; } } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA) == ERESTART) { goto outr; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* Free the device id space if we don't use it */ if (devid && length == 0) free(devid, M_CAMXPT); xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_EXTENDED_INQUIRY); xpt_schedule(periph, priority); goto out; } case PROBE_EXTENDED_INQUIRY: { struct scsi_vpd_extended_inquiry_data *ext_inq; struct ccb_scsiio *csio; int32_t length = 0; csio = &done_ccb->csio; ext_inq = (struct scsi_vpd_extended_inquiry_data *) csio->data_ptr; if (path->device->ext_inq != NULL) { path->device->ext_inq_len = 0; free(path->device->ext_inq, M_CAMXPT); path->device->ext_inq = NULL; } if (ext_inq == NULL) { /* Don't process the command as it was never sent */ } else if (CCB_COMPLETED_OK(csio->ccb_h)) { length = scsi_2btoul(ext_inq->page_length) + __offsetof(struct scsi_vpd_extended_inquiry_data, flags1); length = min(length, sizeof(*ext_inq)); length -= csio->resid; if (length > 0) { path->device->ext_inq_len = length; path->device->ext_inq = (uint8_t *)ext_inq; } } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA) == ERESTART) { goto outr; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* Free the device id space if we don't use it */ if (ext_inq && length <= 0) free(ext_inq, M_CAMXPT); xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_SERIAL_NUM); xpt_schedule(periph, priority); goto out; } probe_device_check: case PROBE_SERIAL_NUM: { struct ccb_scsiio *csio; struct scsi_vpd_unit_serial_number *serial_buf; u_int32_t priority; int changed; int have_serialnum; changed = 1; have_serialnum = 0; csio = &done_ccb->csio; priority = done_ccb->ccb_h.pinfo.priority; serial_buf = (struct scsi_vpd_unit_serial_number *)csio->data_ptr; if (serial_buf == NULL) { /* * Don't process the command as it was never sent */ } else if (cam_ccb_status(done_ccb) == CAM_REQ_CMP && (serial_buf->length > 0)) { have_serialnum = 1; path->device->serial_num = (u_int8_t *)malloc((serial_buf->length + 1), M_CAMXPT, M_NOWAIT); if (path->device->serial_num != NULL) { int start, slen; start = strspn(serial_buf->serial_num, " "); slen = serial_buf->length - start; if (slen <= 0) { /* * SPC5r05 says that an all-space serial * number means no product serial number * is available */ slen = 0; } memcpy(path->device->serial_num, &serial_buf->serial_num[start], slen); path->device->serial_num_len = slen; path->device->serial_num[slen] = '\0'; } } else if (cam_periph_error(done_ccb, 0, SF_RETRY_UA|SF_NO_PRINT) == ERESTART) { goto outr; } else if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* * Let's see if we have seen this device before. */ if ((softc->flags & PROBE_INQUIRY_CKSUM) != 0) { MD5_CTX context; u_int8_t digest[16]; MD5Init(&context); MD5Update(&context, (unsigned char *)&path->device->inq_data, sizeof(struct scsi_inquiry_data)); if (have_serialnum) MD5Update(&context, path->device->serial_num, path->device->serial_num_len); MD5Final(digest, &context); if (bcmp(softc->digest, digest, 16) == 0) changed = 0; /* * XXX Do we need to do a TUR in order to ensure * that the device really hasn't changed??? */ if ((changed != 0) && ((softc->flags & PROBE_NO_ANNOUNCE) == 0)) xpt_async(AC_LOST_DEVICE, path, NULL); } if (serial_buf != NULL) free(serial_buf, M_CAMXPT); if (changed != 0) { /* * Now that we have all the necessary * information to safely perform transfer * negotiations... Controllers don't perform * any negotiation or tagged queuing until * after the first XPT_SET_TRAN_SETTINGS ccb is * received. So, on a new device, just retrieve * the user settings, and set them as the current * settings to set the device up. */ proberequestdefaultnegotiation(periph); xpt_release_ccb(done_ccb); /* * Perform a TUR to allow the controller to * perform any necessary transfer negotiation. */ PROBE_SET_ACTION(softc, PROBE_TUR_FOR_NEGOTIATION); xpt_schedule(periph, priority); goto out; } xpt_release_ccb(done_ccb); break; } case PROBE_TUR_FOR_NEGOTIATION: case PROBE_DV_EXIT: if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, SF_NO_PRINT | SF_NO_RECOVERY | SF_NO_RETRY) == ERESTART) goto outr; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } /* * Do Domain Validation for lun 0 on devices that claim * to support Synchronous Transfer modes. */ if (softc->action == PROBE_TUR_FOR_NEGOTIATION && done_ccb->ccb_h.target_lun == 0 && (path->device->inq_data.flags & SID_Sync) != 0 && (path->device->flags & CAM_DEV_IN_DV) == 0) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Begin Domain Validation\n")); path->device->flags |= CAM_DEV_IN_DV; xpt_release_ccb(done_ccb); PROBE_SET_ACTION(softc, PROBE_INQUIRY_BASIC_DV1); xpt_schedule(periph, priority); goto out; } if (softc->action == PROBE_DV_EXIT) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Leave Domain Validation\n")); } if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } path->device->flags &= ~(CAM_DEV_IN_DV|CAM_DEV_DV_HIT_BOTTOM); if ((softc->flags & PROBE_NO_ANNOUNCE) == 0) { /* Inform the XPT that a new device has been found */ done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, done_ccb->ccb_h.path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); xpt_release_ccb(done_ccb); break; case PROBE_INQUIRY_BASIC_DV1: case PROBE_INQUIRY_BASIC_DV2: { struct scsi_inquiry_data *nbuf; struct ccb_scsiio *csio; if (cam_ccb_status(done_ccb) != CAM_REQ_CMP) { if (cam_periph_error(done_ccb, 0, SF_NO_PRINT | SF_NO_RECOVERY | SF_NO_RETRY) == ERESTART) goto outr; } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) { /* Don't wedge the queue */ xpt_release_devq(done_ccb->ccb_h.path, /*count*/1, /*run_queue*/TRUE); } csio = &done_ccb->csio; nbuf = (struct scsi_inquiry_data *)csio->data_ptr; if (bcmp(nbuf, &path->device->inq_data, SHORT_INQUIRY_LENGTH)) { xpt_print(path, "inquiry data fails comparison at DV%d step\n", softc->action == PROBE_INQUIRY_BASIC_DV1 ? 1 : 2); if (proberequestbackoff(periph, path->device)) { path->device->flags &= ~CAM_DEV_IN_DV; PROBE_SET_ACTION(softc, PROBE_TUR_FOR_NEGOTIATION); } else { /* give up */ PROBE_SET_ACTION(softc, PROBE_DV_EXIT); } free(nbuf, M_CAMXPT); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } free(nbuf, M_CAMXPT); if (softc->action == PROBE_INQUIRY_BASIC_DV1) { PROBE_SET_ACTION(softc, PROBE_INQUIRY_BASIC_DV2); xpt_release_ccb(done_ccb); xpt_schedule(periph, priority); goto out; } if (softc->action == PROBE_INQUIRY_BASIC_DV2) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Leave Domain Validation Successfully\n")); } if (path->device->flags & CAM_DEV_UNCONFIGURED) { path->device->flags &= ~CAM_DEV_UNCONFIGURED; xpt_acquire_device(path->device); } path->device->flags &= ~(CAM_DEV_IN_DV|CAM_DEV_DV_HIT_BOTTOM); if ((softc->flags & PROBE_NO_ANNOUNCE) == 0) { /* Inform the XPT that a new device has been found */ done_ccb->ccb_h.func_code = XPT_GDEV_TYPE; xpt_action(done_ccb); xpt_async(AC_FOUND_DEVICE, done_ccb->ccb_h.path, done_ccb); } PROBE_SET_ACTION(softc, PROBE_DONE); xpt_release_ccb(done_ccb); break; } default: panic("probedone: invalid action state 0x%x\n", softc->action); } done_ccb = (union ccb *)TAILQ_FIRST(&softc->request_ccbs); TAILQ_REMOVE(&softc->request_ccbs, &done_ccb->ccb_h, periph_links.tqe); done_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(done_ccb); if (TAILQ_FIRST(&softc->request_ccbs) == NULL) { CAM_DEBUG(periph->path, CAM_DEBUG_PROBE, ("Probe completed\n")); /* Drop freeze taken due to CAM_DEV_QFREEZE flag set. */ cam_release_devq(path, 0, 0, 0, FALSE); cam_periph_release_locked(periph); cam_periph_invalidate(periph); cam_periph_release_locked(periph); } else { probeschedule(periph); goto out; } } static void probe_purge_old(struct cam_path *path, struct scsi_report_luns_data *new, probe_flags flags) { struct cam_path *tp; struct scsi_report_luns_data *old; u_int idx1, idx2, nlun_old, nlun_new; lun_id_t this_lun; u_int8_t *ol, *nl; if (path->target == NULL) { return; } mtx_lock(&path->target->luns_mtx); old = path->target->luns; path->target->luns = new; mtx_unlock(&path->target->luns_mtx); if (old == NULL) return; nlun_old = scsi_4btoul(old->length) / 8; nlun_new = scsi_4btoul(new->length) / 8; /* * We are not going to assume sorted lists. Deal. */ for (idx1 = 0; idx1 < nlun_old; idx1++) { ol = old->luns[idx1].lundata; for (idx2 = 0; idx2 < nlun_new; idx2++) { nl = new->luns[idx2].lundata; if (memcmp(nl, ol, 8) == 0) { break; } } if (idx2 < nlun_new) { continue; } /* * An 'old' item not in the 'new' list. * Nuke it. Except that if it is lun 0, * that would be what the probe state * machine is currently working on, * so we won't do that. */ CAM_GET_LUN(old, idx1, this_lun); if (this_lun == 0) { continue; } /* * We also cannot nuke it if it is * not in a lun format we understand * and replace the LUN with a "simple" LUN * if that is all the HBA supports. */ if (!(flags & PROBE_EXTLUN)) { if (!CAM_CAN_GET_SIMPLE_LUN(old, idx1)) continue; CAM_GET_SIMPLE_LUN(old, idx1, this_lun); } if (xpt_create_path(&tp, NULL, xpt_path_path_id(path), xpt_path_target_id(path), this_lun) == CAM_REQ_CMP) { xpt_async(AC_LOST_DEVICE, tp, NULL); xpt_free_path(tp); } } free(old, M_CAMXPT); } static void probecleanup(struct cam_periph *periph) { free(periph->softc, M_CAMXPT); } static void scsi_find_quirk(struct cam_ed *device) { struct scsi_quirk_entry *quirk; caddr_t match; match = cam_quirkmatch((caddr_t)&device->inq_data, (caddr_t)scsi_quirk_table, nitems(scsi_quirk_table), sizeof(*scsi_quirk_table), scsi_inquiry_match); if (match == NULL) panic("xpt_find_quirk: device didn't match wildcard entry!!"); quirk = (struct scsi_quirk_entry *)match; device->quirk = quirk; device->mintags = quirk->mintags; device->maxtags = quirk->maxtags; } static int sysctl_cam_search_luns(SYSCTL_HANDLER_ARGS) { int error, val; val = cam_srch_hi; error = sysctl_handle_int(oidp, &val, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (val == 0 || val == 1) { cam_srch_hi = val; return (0); } else { return (EINVAL); } } typedef struct { union ccb *request_ccb; struct ccb_pathinq *cpi; int counter; int lunindex[0]; } scsi_scan_bus_info; /* * To start a scan, request_ccb is an XPT_SCAN_BUS ccb. * As the scan progresses, scsi_scan_bus is used as the * callback on completion function. */ static void scsi_scan_bus(struct cam_periph *periph, union ccb *request_ccb) { struct mtx *mtx; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("scsi_scan_bus\n")); switch (request_ccb->ccb_h.func_code) { case XPT_SCAN_BUS: case XPT_SCAN_TGT: { scsi_scan_bus_info *scan_info; union ccb *work_ccb, *reset_ccb; struct cam_path *path; u_int i; u_int low_target, max_target; u_int initiator_id; /* Find out the characteristics of the bus */ work_ccb = xpt_alloc_ccb_nowait(); if (work_ccb == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(request_ccb); return; } xpt_setup_ccb(&work_ccb->ccb_h, request_ccb->ccb_h.path, request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_PATH_INQ; xpt_action(work_ccb); if (work_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = work_ccb->ccb_h.status; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } if ((work_ccb->cpi.hba_misc & PIM_NOINITIATOR) != 0) { /* * Can't scan the bus on an adapter that * cannot perform the initiator role. */ request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } /* We may need to reset bus first, if we haven't done it yet. */ if ((work_ccb->cpi.hba_inquiry & (PI_WIDE_32|PI_WIDE_16|PI_SDTR_ABLE)) && !(work_ccb->cpi.hba_misc & PIM_NOBUSRESET) && !timevalisset(&request_ccb->ccb_h.path->bus->last_reset) && (reset_ccb = xpt_alloc_ccb_nowait()) != NULL) { xpt_setup_ccb(&reset_ccb->ccb_h, request_ccb->ccb_h.path, CAM_PRIORITY_NONE); reset_ccb->ccb_h.func_code = XPT_RESET_BUS; xpt_action(reset_ccb); if (reset_ccb->ccb_h.status != CAM_REQ_CMP) { request_ccb->ccb_h.status = reset_ccb->ccb_h.status; xpt_free_ccb(reset_ccb); xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } xpt_free_ccb(reset_ccb); } /* Save some state for use while we probe for devices */ scan_info = (scsi_scan_bus_info *) malloc(sizeof(scsi_scan_bus_info) + (work_ccb->cpi.max_target * sizeof (u_int)), M_CAMXPT, M_ZERO|M_NOWAIT); if (scan_info == NULL) { request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_free_ccb(work_ccb); xpt_done(request_ccb); return; } CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("SCAN start for %p\n", scan_info)); scan_info->request_ccb = request_ccb; scan_info->cpi = &work_ccb->cpi; /* Cache on our stack so we can work asynchronously */ max_target = scan_info->cpi->max_target; low_target = 0; initiator_id = scan_info->cpi->initiator_id; /* * We can scan all targets in parallel, or do it sequentially. */ if (request_ccb->ccb_h.func_code == XPT_SCAN_TGT) { max_target = low_target = request_ccb->ccb_h.target_id; scan_info->counter = 0; } else if (scan_info->cpi->hba_misc & PIM_SEQSCAN) { max_target = 0; scan_info->counter = 0; } else { scan_info->counter = scan_info->cpi->max_target + 1; if (scan_info->cpi->initiator_id < scan_info->counter) { scan_info->counter--; } } mtx = xpt_path_mtx(scan_info->request_ccb->ccb_h.path); mtx_unlock(mtx); for (i = low_target; i <= max_target; i++) { cam_status status; if (i == initiator_id) continue; status = xpt_create_path(&path, NULL, request_ccb->ccb_h.path_id, i, 0); if (status != CAM_REQ_CMP) { printf("scsi_scan_bus: xpt_create_path failed" " with status %#x, bus scan halted\n", status); free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = status; xpt_free_ccb(work_ccb); xpt_done(request_ccb); break; } work_ccb = xpt_alloc_ccb_nowait(); if (work_ccb == NULL) { xpt_free_ccb((union ccb *)scan_info->cpi); free(scan_info, M_CAMXPT); xpt_free_path(path); request_ccb->ccb_h.status = CAM_RESRC_UNAVAIL; xpt_done(request_ccb); break; } xpt_setup_ccb(&work_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); work_ccb->ccb_h.func_code = XPT_SCAN_LUN; work_ccb->ccb_h.cbfcnp = scsi_scan_bus; work_ccb->ccb_h.flags |= CAM_UNLOCKED; work_ccb->ccb_h.ppriv_ptr0 = scan_info; work_ccb->crcn.flags = request_ccb->crcn.flags; xpt_action(work_ccb); } mtx_lock(mtx); break; } case XPT_SCAN_LUN: { cam_status status; struct cam_path *path, *oldpath; scsi_scan_bus_info *scan_info; struct cam_et *target; struct cam_ed *device, *nextdev; int next_target; path_id_t path_id; target_id_t target_id; lun_id_t lun_id; oldpath = request_ccb->ccb_h.path; status = cam_ccb_status(request_ccb); scan_info = (scsi_scan_bus_info *)request_ccb->ccb_h.ppriv_ptr0; path_id = request_ccb->ccb_h.path_id; target_id = request_ccb->ccb_h.target_id; lun_id = request_ccb->ccb_h.target_lun; target = request_ccb->ccb_h.path->target; next_target = 1; mtx = xpt_path_mtx(scan_info->request_ccb->ccb_h.path); mtx_lock(mtx); mtx_lock(&target->luns_mtx); if (target->luns) { lun_id_t first; u_int nluns = scsi_4btoul(target->luns->length) / 8; /* * Make sure we skip over lun 0 if it's the first member * of the list as we've actually just finished probing * it. */ CAM_GET_LUN(target->luns, 0, first); if (first == 0 && scan_info->lunindex[target_id] == 0) { scan_info->lunindex[target_id]++; } /* * Skip any LUNs that the HBA can't deal with. */ while (scan_info->lunindex[target_id] < nluns) { if (scan_info->cpi->hba_misc & PIM_EXTLUNS) { CAM_GET_LUN(target->luns, scan_info->lunindex[target_id], lun_id); break; } if (CAM_CAN_GET_SIMPLE_LUN(target->luns, scan_info->lunindex[target_id])) { CAM_GET_SIMPLE_LUN(target->luns, scan_info->lunindex[target_id], lun_id); break; } scan_info->lunindex[target_id]++; } if (scan_info->lunindex[target_id] < nluns) { mtx_unlock(&target->luns_mtx); next_target = 0; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_PROBE, ("next lun to try at index %u is %jx\n", scan_info->lunindex[target_id], (uintmax_t)lun_id)); scan_info->lunindex[target_id]++; } else { mtx_unlock(&target->luns_mtx); /* We're done with scanning all luns. */ } } else { mtx_unlock(&target->luns_mtx); device = request_ccb->ccb_h.path->device; /* Continue sequential LUN scan if: */ /* -- we have more LUNs that need recheck */ mtx_lock(&target->bus->eb_mtx); nextdev = device; while ((nextdev = TAILQ_NEXT(nextdev, links)) != NULL) if ((nextdev->flags & CAM_DEV_UNCONFIGURED) == 0) break; mtx_unlock(&target->bus->eb_mtx); if (nextdev != NULL) { next_target = 0; /* -- stop if CAM_QUIRK_NOLUNS is set. */ } else if (SCSI_QUIRK(device)->quirks & CAM_QUIRK_NOLUNS) { next_target = 1; /* -- this LUN is connected and its SCSI version * allows more LUNs. */ } else if ((device->flags & CAM_DEV_UNCONFIGURED) == 0) { if (lun_id < (CAM_SCSI2_MAXLUN-1) || CAN_SRCH_HI_DENSE(device)) next_target = 0; /* -- this LUN is disconnected, its SCSI version * allows more LUNs and we guess they may be. */ } else if ((device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0) { if (lun_id < (CAM_SCSI2_MAXLUN-1) || CAN_SRCH_HI_SPARSE(device)) next_target = 0; } if (next_target == 0) { lun_id++; if (lun_id > scan_info->cpi->max_lun) next_target = 1; } } /* * Check to see if we scan any further luns. */ if (next_target) { int done; /* * Free the current request path- we're done with it. */ xpt_free_path(oldpath); hop_again: done = 0; if (scan_info->request_ccb->ccb_h.func_code == XPT_SCAN_TGT) { done = 1; } else if (scan_info->cpi->hba_misc & PIM_SEQSCAN) { scan_info->counter++; if (scan_info->counter == scan_info->cpi->initiator_id) { scan_info->counter++; } if (scan_info->counter >= scan_info->cpi->max_target+1) { done = 1; } } else { scan_info->counter--; if (scan_info->counter == 0) { done = 1; } } if (done) { mtx_unlock(mtx); xpt_free_ccb(request_ccb); xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; CAM_DEBUG(request_ccb->ccb_h.path, CAM_DEBUG_TRACE, ("SCAN done for %p\n", scan_info)); free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); break; } if ((scan_info->cpi->hba_misc & PIM_SEQSCAN) == 0) { mtx_unlock(mtx); xpt_free_ccb(request_ccb); break; } status = xpt_create_path(&path, NULL, scan_info->request_ccb->ccb_h.path_id, scan_info->counter, 0); if (status != CAM_REQ_CMP) { mtx_unlock(mtx); printf("scsi_scan_bus: xpt_create_path failed" " with status %#x, bus scan halted\n", status); xpt_free_ccb(request_ccb); xpt_free_ccb((union ccb *)scan_info->cpi); request_ccb = scan_info->request_ccb; free(scan_info, M_CAMXPT); request_ccb->ccb_h.status = status; xpt_done(request_ccb); break; } xpt_setup_ccb(&request_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.cbfcnp = scsi_scan_bus; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->ccb_h.ppriv_ptr0 = scan_info; request_ccb->crcn.flags = scan_info->request_ccb->crcn.flags; } else { status = xpt_create_path(&path, NULL, path_id, target_id, lun_id); /* * Free the old request path- we're done with it. We * do this *after* creating the new path so that * we don't remove a target that has our lun list * in the case that lun 0 is not present. */ xpt_free_path(oldpath); if (status != CAM_REQ_CMP) { printf("scsi_scan_bus: xpt_create_path failed " "with status %#x, halting LUN scan\n", status); goto hop_again; } xpt_setup_ccb(&request_ccb->ccb_h, path, request_ccb->ccb_h.pinfo.priority); request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.cbfcnp = scsi_scan_bus; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->ccb_h.ppriv_ptr0 = scan_info; request_ccb->crcn.flags = scan_info->request_ccb->crcn.flags; } mtx_unlock(mtx); xpt_action(request_ccb); break; } default: break; } } static void scsi_scan_lun(struct cam_periph *periph, struct cam_path *path, cam_flags flags, union ccb *request_ccb) { struct ccb_pathinq cpi; cam_status status; struct cam_path *new_path; struct cam_periph *old_periph; int lock; CAM_DEBUG(path, CAM_DEBUG_TRACE, ("scsi_scan_lun\n")); memset(&cpi, 0, sizeof(cpi)); xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); if (cpi.ccb_h.status != CAM_REQ_CMP) { if (request_ccb != NULL) { request_ccb->ccb_h.status = cpi.ccb_h.status; xpt_done(request_ccb); } return; } if ((cpi.hba_misc & PIM_NOINITIATOR) != 0) { /* * Can't scan the bus on an adapter that * cannot perform the initiator role. */ if (request_ccb != NULL) { request_ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(request_ccb); } return; } if (request_ccb == NULL) { request_ccb = xpt_alloc_ccb_nowait(); if (request_ccb == NULL) { xpt_print(path, "scsi_scan_lun: can't allocate CCB, " "can't continue\n"); return; } status = xpt_create_path(&new_path, NULL, path->bus->path_id, path->target->target_id, path->device->lun_id); if (status != CAM_REQ_CMP) { xpt_print(path, "scsi_scan_lun: can't create path, " "can't continue\n"); xpt_free_ccb(request_ccb); return; } xpt_setup_ccb(&request_ccb->ccb_h, new_path, CAM_PRIORITY_XPT); request_ccb->ccb_h.cbfcnp = xptscandone; request_ccb->ccb_h.func_code = XPT_SCAN_LUN; request_ccb->ccb_h.flags |= CAM_UNLOCKED; request_ccb->crcn.flags = flags; } lock = (xpt_path_owned(path) == 0); if (lock) xpt_path_lock(path); if ((old_periph = cam_periph_find(path, "probe")) != NULL) { if ((old_periph->flags & CAM_PERIPH_INVALID) == 0) { probe_softc *softc; softc = (probe_softc *)old_periph->softc; TAILQ_INSERT_TAIL(&softc->request_ccbs, &request_ccb->ccb_h, periph_links.tqe); } else { request_ccb->ccb_h.status = CAM_REQ_CMP_ERR; xpt_done(request_ccb); } } else { status = cam_periph_alloc(proberegister, NULL, probecleanup, probestart, "probe", CAM_PERIPH_BIO, request_ccb->ccb_h.path, NULL, 0, request_ccb); if (status != CAM_REQ_CMP) { xpt_print(path, "scsi_scan_lun: cam_alloc_periph " "returned an error, can't continue probe\n"); request_ccb->ccb_h.status = status; xpt_done(request_ccb); } } if (lock) xpt_path_unlock(path); } static void xptscandone(struct cam_periph *periph, union ccb *done_ccb) { xpt_free_path(done_ccb->ccb_h.path); xpt_free_ccb(done_ccb); } static struct cam_ed * scsi_alloc_device(struct cam_eb *bus, struct cam_et *target, lun_id_t lun_id) { struct scsi_quirk_entry *quirk; struct cam_ed *device; device = xpt_alloc_device(bus, target, lun_id); if (device == NULL) return (NULL); /* * Take the default quirk entry until we have inquiry * data and can determine a better quirk to use. */ quirk = &scsi_quirk_table[nitems(scsi_quirk_table) - 1]; device->quirk = (void *)quirk; device->mintags = quirk->mintags; device->maxtags = quirk->maxtags; bzero(&device->inq_data, sizeof(device->inq_data)); device->inq_flags = 0; device->queue_flags = 0; device->serial_num = NULL; device->serial_num_len = 0; device->device_id = NULL; device->device_id_len = 0; device->supported_vpds = NULL; device->supported_vpds_len = 0; return (device); } static void scsi_devise_transport(struct cam_path *path) { struct ccb_pathinq cpi; struct ccb_trans_settings cts; struct scsi_inquiry_data *inq_buf; /* Get transport information from the SIM */ memset(&cpi, 0, sizeof(cpi)); xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); inq_buf = NULL; if ((path->device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0) inq_buf = &path->device->inq_data; path->device->protocol = PROTO_SCSI; path->device->protocol_version = inq_buf != NULL ? SID_ANSI_REV(inq_buf) : cpi.protocol_version; path->device->transport = cpi.transport; path->device->transport_version = cpi.transport_version; /* * Any device not using SPI3 features should * be considered SPI2 or lower. */ if (inq_buf != NULL) { if (path->device->transport == XPORT_SPI && (inq_buf->spi3data & SID_SPI_MASK) == 0 && path->device->transport_version > 2) path->device->transport_version = 2; } else { struct cam_ed* otherdev; for (otherdev = TAILQ_FIRST(&path->target->ed_entries); otherdev != NULL; otherdev = TAILQ_NEXT(otherdev, links)) { if (otherdev != path->device) break; } if (otherdev != NULL) { /* * Initially assume the same versioning as * prior luns for this target. */ path->device->protocol_version = otherdev->protocol_version; path->device->transport_version = otherdev->transport_version; } else { /* Until we know better, opt for safety */ path->device->protocol_version = 2; if (path->device->transport == XPORT_SPI) path->device->transport_version = 2; else path->device->transport_version = 0; } } /* * XXX * For a device compliant with SPC-2 we should be able * to determine the transport version supported by * scrutinizing the version descriptors in the * inquiry buffer. */ /* Tell the controller what we think */ memset(&cts, 0, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.ccb_h.func_code = XPT_SET_TRAN_SETTINGS; cts.type = CTS_TYPE_CURRENT_SETTINGS; cts.transport = path->device->transport; cts.transport_version = path->device->transport_version; cts.protocol = path->device->protocol; cts.protocol_version = path->device->protocol_version; cts.proto_specific.valid = 0; cts.xport_specific.valid = 0; xpt_action((union ccb *)&cts); } static void scsi_dev_advinfo(union ccb *start_ccb) { struct cam_ed *device; struct ccb_dev_advinfo *cdai; off_t amt; xpt_path_assert(start_ccb->ccb_h.path, MA_OWNED); start_ccb->ccb_h.status = CAM_REQ_INVALID; device = start_ccb->ccb_h.path->device; cdai = &start_ccb->cdai; switch(cdai->buftype) { case CDAI_TYPE_SCSI_DEVID: if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->device_id_len; if (device->device_id_len == 0) break; amt = device->device_id_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->device_id, amt); break; case CDAI_TYPE_SERIAL_NUM: if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->serial_num_len; if (device->serial_num_len == 0) break; amt = device->serial_num_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->serial_num, amt); break; case CDAI_TYPE_PHYS_PATH: if (cdai->flags & CDAI_FLAG_STORE) { if (device->physpath != NULL) { free(device->physpath, M_CAMXPT); device->physpath = NULL; device->physpath_len = 0; } /* Clear existing buffer if zero length */ if (cdai->bufsiz == 0) break; device->physpath = malloc(cdai->bufsiz, M_CAMXPT, M_NOWAIT); if (device->physpath == NULL) { start_ccb->ccb_h.status = CAM_REQ_ABORTED; return; } device->physpath_len = cdai->bufsiz; memcpy(device->physpath, cdai->buf, cdai->bufsiz); } else { cdai->provsiz = device->physpath_len; if (device->physpath_len == 0) break; amt = device->physpath_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->physpath, amt); } break; case CDAI_TYPE_RCAPLONG: if (cdai->flags & CDAI_FLAG_STORE) { if (device->rcap_buf != NULL) { free(device->rcap_buf, M_CAMXPT); device->rcap_buf = NULL; } device->rcap_len = cdai->bufsiz; /* Clear existing buffer if zero length */ if (cdai->bufsiz == 0) break; device->rcap_buf = malloc(cdai->bufsiz, M_CAMXPT, M_NOWAIT); if (device->rcap_buf == NULL) { start_ccb->ccb_h.status = CAM_REQ_ABORTED; return; } memcpy(device->rcap_buf, cdai->buf, cdai->bufsiz); } else { cdai->provsiz = device->rcap_len; if (device->rcap_len == 0) break; amt = device->rcap_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->rcap_buf, amt); } break; case CDAI_TYPE_EXT_INQ: /* * We fetch extended inquiry data during probe, if * available. We don't allow changing it. */ if (cdai->flags & CDAI_FLAG_STORE) return; cdai->provsiz = device->ext_inq_len; if (device->ext_inq_len == 0) break; amt = device->ext_inq_len; if (cdai->provsiz > cdai->bufsiz) amt = cdai->bufsiz; memcpy(cdai->buf, device->ext_inq, amt); break; default: return; } start_ccb->ccb_h.status = CAM_REQ_CMP; if (cdai->flags & CDAI_FLAG_STORE) { xpt_async(AC_ADVINFO_CHANGED, start_ccb->ccb_h.path, (void *)(uintptr_t)cdai->buftype); } } static void scsi_action(union ccb *start_ccb) { + if (start_ccb->ccb_h.func_code != XPT_SCSI_IO) { + KASSERT((start_ccb->ccb_h.alloc_flags & CAM_CCB_FROM_UMA) == 0, + ("%s: ccb %p, func_code %#x should not be allocated " + "from UMA zone\n", + __func__, start_ccb, start_ccb->ccb_h.func_code)); + } + switch (start_ccb->ccb_h.func_code) { case XPT_SET_TRAN_SETTINGS: { scsi_set_transfer_settings(&start_ccb->cts, start_ccb->ccb_h.path, /*async_update*/FALSE); break; } case XPT_SCAN_BUS: case XPT_SCAN_TGT: scsi_scan_bus(start_ccb->ccb_h.path->periph, start_ccb); break; case XPT_SCAN_LUN: scsi_scan_lun(start_ccb->ccb_h.path->periph, start_ccb->ccb_h.path, start_ccb->crcn.flags, start_ccb); break; case XPT_DEV_ADVINFO: { scsi_dev_advinfo(start_ccb); break; } default: xpt_action_default(start_ccb); break; } } static void scsi_set_transfer_settings(struct ccb_trans_settings *cts, struct cam_path *path, int async_update) { struct ccb_pathinq cpi; struct ccb_trans_settings cur_cts; struct ccb_trans_settings_scsi *scsi; struct ccb_trans_settings_scsi *cur_scsi; struct scsi_inquiry_data *inq_data; struct cam_ed *device; if (path == NULL || (device = path->device) == NULL) { cts->ccb_h.status = CAM_PATH_INVALID; xpt_done((union ccb *)cts); return; } if (cts->protocol == PROTO_UNKNOWN || cts->protocol == PROTO_UNSPECIFIED) { cts->protocol = device->protocol; cts->protocol_version = device->protocol_version; } if (cts->protocol_version == PROTO_VERSION_UNKNOWN || cts->protocol_version == PROTO_VERSION_UNSPECIFIED) cts->protocol_version = device->protocol_version; if (cts->protocol != device->protocol) { xpt_print(path, "Uninitialized Protocol %x:%x?\n", cts->protocol, device->protocol); cts->protocol = device->protocol; } if (cts->protocol_version > device->protocol_version) { if (bootverbose) { xpt_print(path, "Down reving Protocol " "Version from %d to %d?\n", cts->protocol_version, device->protocol_version); } cts->protocol_version = device->protocol_version; } if (cts->transport == XPORT_UNKNOWN || cts->transport == XPORT_UNSPECIFIED) { cts->transport = device->transport; cts->transport_version = device->transport_version; } if (cts->transport_version == XPORT_VERSION_UNKNOWN || cts->transport_version == XPORT_VERSION_UNSPECIFIED) cts->transport_version = device->transport_version; if (cts->transport != device->transport) { xpt_print(path, "Uninitialized Transport %x:%x?\n", cts->transport, device->transport); cts->transport = device->transport; } if (cts->transport_version > device->transport_version) { if (bootverbose) { xpt_print(path, "Down reving Transport " "Version from %d to %d?\n", cts->transport_version, device->transport_version); } cts->transport_version = device->transport_version; } /* * Nothing more of interest to do unless * this is a device connected via the * SCSI protocol. */ if (cts->protocol != PROTO_SCSI) { if (async_update == FALSE) xpt_action_default((union ccb *)cts); return; } inq_data = &device->inq_data; scsi = &cts->proto_specific.scsi; memset(&cpi, 0, sizeof(cpi)); xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NONE); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); /* SCSI specific sanity checking */ if ((cpi.hba_inquiry & PI_TAG_ABLE) == 0 || (INQ_DATA_TQ_ENABLED(inq_data)) == 0 || (device->queue_flags & SCP_QUEUE_DQUE) != 0 || (device->mintags == 0)) { /* * Can't tag on hardware that doesn't support tags, * doesn't have it enabled, or has broken tag support. */ scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; } if (async_update == FALSE) { /* * Perform sanity checking against what the * controller and device can do. */ memset(&cur_cts, 0, sizeof(cur_cts)); xpt_setup_ccb(&cur_cts.ccb_h, path, CAM_PRIORITY_NONE); cur_cts.ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cur_cts.type = cts->type; xpt_action((union ccb *)&cur_cts); if (cam_ccb_status((union ccb *)&cur_cts) != CAM_REQ_CMP) { return; } cur_scsi = &cur_cts.proto_specific.scsi; if ((scsi->valid & CTS_SCSI_VALID_TQ) == 0) { scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; scsi->flags |= cur_scsi->flags & CTS_SCSI_FLAGS_TAG_ENB; } if ((cur_scsi->valid & CTS_SCSI_VALID_TQ) == 0) scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; } /* SPI specific sanity checking */ if (cts->transport == XPORT_SPI && async_update == FALSE) { u_int spi3caps; struct ccb_trans_settings_spi *spi; struct ccb_trans_settings_spi *cur_spi; spi = &cts->xport_specific.spi; cur_spi = &cur_cts.xport_specific.spi; /* Fill in any gaps in what the user gave us */ if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) spi->sync_period = cur_spi->sync_period; if ((cur_spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) spi->sync_period = 0; if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) spi->sync_offset = cur_spi->sync_offset; if ((cur_spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) spi->sync_offset = 0; if ((spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) spi->ppr_options = cur_spi->ppr_options; if ((cur_spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) spi->ppr_options = 0; if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) == 0) spi->bus_width = cur_spi->bus_width; if ((cur_spi->valid & CTS_SPI_VALID_BUS_WIDTH) == 0) spi->bus_width = 0; if ((spi->valid & CTS_SPI_VALID_DISC) == 0) { spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; spi->flags |= cur_spi->flags & CTS_SPI_FLAGS_DISC_ENB; } if ((cur_spi->valid & CTS_SPI_VALID_DISC) == 0) spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0 && (inq_data->flags & SID_Sync) == 0 && cts->type == CTS_TYPE_CURRENT_SETTINGS) || ((cpi.hba_inquiry & PI_SDTR_ABLE) == 0)) { /* Force async */ spi->sync_period = 0; spi->sync_offset = 0; } switch (spi->bus_width) { case MSG_EXT_WDTR_BUS_32_BIT: if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) == 0 || (inq_data->flags & SID_WBus32) != 0 || cts->type == CTS_TYPE_USER_SETTINGS) && (cpi.hba_inquiry & PI_WIDE_32) != 0) break; /* Fall Through to 16-bit */ case MSG_EXT_WDTR_BUS_16_BIT: if (((device->flags & CAM_DEV_INQUIRY_DATA_VALID) == 0 || (inq_data->flags & SID_WBus16) != 0 || cts->type == CTS_TYPE_USER_SETTINGS) && (cpi.hba_inquiry & PI_WIDE_16) != 0) { spi->bus_width = MSG_EXT_WDTR_BUS_16_BIT; break; } /* Fall Through to 8-bit */ default: /* New bus width?? */ case MSG_EXT_WDTR_BUS_8_BIT: /* All targets can do this */ spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT; break; } spi3caps = cpi.xport_specific.spi.ppr_options; if ((device->flags & CAM_DEV_INQUIRY_DATA_VALID) != 0 && cts->type == CTS_TYPE_CURRENT_SETTINGS) spi3caps &= inq_data->spi3data; if ((spi3caps & SID_SPI_CLOCK_DT) == 0) spi->ppr_options &= ~MSG_EXT_PPR_DT_REQ; if ((spi3caps & SID_SPI_IUS) == 0) spi->ppr_options &= ~MSG_EXT_PPR_IU_REQ; if ((spi3caps & SID_SPI_QAS) == 0) spi->ppr_options &= ~MSG_EXT_PPR_QAS_REQ; /* No SPI Transfer settings are allowed unless we are wide */ if (spi->bus_width == 0) spi->ppr_options = 0; if ((spi->valid & CTS_SPI_VALID_DISC) && ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) == 0)) { /* * Can't tag queue without disconnection. */ scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; scsi->valid |= CTS_SCSI_VALID_TQ; } /* * If we are currently performing tagged transactions to * this device and want to change its negotiation parameters, * go non-tagged for a bit to give the controller a chance to * negotiate unhampered by tag messages. */ if (cts->type == CTS_TYPE_CURRENT_SETTINGS && (device->inq_flags & SID_CmdQue) != 0 && (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0 && (spi->flags & (CTS_SPI_VALID_SYNC_RATE| CTS_SPI_VALID_SYNC_OFFSET| CTS_SPI_VALID_BUS_WIDTH)) != 0) scsi_toggle_tags(path); } if (cts->type == CTS_TYPE_CURRENT_SETTINGS && (scsi->valid & CTS_SCSI_VALID_TQ) != 0) { int device_tagenb; /* * If we are transitioning from tags to no-tags or * vice-versa, we need to carefully freeze and restart * the queue so that we don't overlap tagged and non-tagged * commands. We also temporarily stop tags if there is * a change in transfer negotiation settings to allow * "tag-less" negotiation. */ if ((device->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || (device->inq_flags & SID_CmdQue) != 0) device_tagenb = TRUE; else device_tagenb = FALSE; if (((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0 && device_tagenb == FALSE) || ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) == 0 && device_tagenb == TRUE)) { if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0) { /* * Delay change to use tags until after a * few commands have gone to this device so * the controller has time to perform transfer * negotiations without tagged messages getting * in the way. */ device->tag_delay_count = CAM_TAG_DELAY_COUNT; device->flags |= CAM_DEV_TAG_AFTER_COUNT; } else { xpt_stop_tags(path); } } } if (async_update == FALSE) xpt_action_default((union ccb *)cts); } static void scsi_toggle_tags(struct cam_path *path) { struct cam_ed *dev; /* * Give controllers a chance to renegotiate * before starting tag operations. We * "toggle" tagged queuing off then on * which causes the tag enable command delay * counter to come into effect. */ dev = path->device; if ((dev->flags & CAM_DEV_TAG_AFTER_COUNT) != 0 || ((dev->inq_flags & SID_CmdQue) != 0 && (dev->inq_flags & (SID_Sync|SID_WBus16|SID_WBus32)) != 0)) { struct ccb_trans_settings cts; memset(&cts, 0, sizeof(cts)); xpt_setup_ccb(&cts.ccb_h, path, CAM_PRIORITY_NONE); cts.protocol = PROTO_SCSI; cts.protocol_version = PROTO_VERSION_UNSPECIFIED; cts.transport = XPORT_UNSPECIFIED; cts.transport_version = XPORT_VERSION_UNSPECIFIED; cts.proto_specific.scsi.flags = 0; cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ; scsi_set_transfer_settings(&cts, path, /*async_update*/TRUE); cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB; scsi_set_transfer_settings(&cts, path, /*async_update*/TRUE); } } /* * Handle any per-device event notifications that require action by the XPT. */ static void scsi_dev_async(u_int32_t async_code, struct cam_eb *bus, struct cam_et *target, struct cam_ed *device, void *async_arg) { cam_status status; struct cam_path newpath; /* * We only need to handle events for real devices. */ if (target->target_id == CAM_TARGET_WILDCARD || device->lun_id == CAM_LUN_WILDCARD) return; /* * We need our own path with wildcards expanded to * handle certain types of events. */ if ((async_code == AC_SENT_BDR) || (async_code == AC_BUS_RESET) || (async_code == AC_INQ_CHANGED)) status = xpt_compile_path(&newpath, NULL, bus->path_id, target->target_id, device->lun_id); else status = CAM_REQ_CMP_ERR; if (status == CAM_REQ_CMP) { /* * Allow transfer negotiation to occur in a * tag free environment and after settle delay. */ if (async_code == AC_SENT_BDR || async_code == AC_BUS_RESET) { cam_freeze_devq(&newpath); cam_release_devq(&newpath, RELSIM_RELEASE_AFTER_TIMEOUT, /*reduction*/0, /*timeout*/scsi_delay, /*getcount_only*/0); scsi_toggle_tags(&newpath); } if (async_code == AC_INQ_CHANGED) { /* * We've sent a start unit command, or * something similar to a device that * may have caused its inquiry data to * change. So we re-scan the device to * refresh the inquiry data for it. */ scsi_scan_lun(newpath.periph, &newpath, CAM_EXPECT_INQ_CHANGE, NULL); } xpt_release_path(&newpath); } else if (async_code == AC_LOST_DEVICE && (device->flags & CAM_DEV_UNCONFIGURED) == 0) { device->flags |= CAM_DEV_UNCONFIGURED; xpt_release_device(device); } else if (async_code == AC_TRANSFER_NEG) { struct ccb_trans_settings *settings; struct cam_path path; settings = (struct ccb_trans_settings *)async_arg; xpt_compile_path(&path, NULL, bus->path_id, target->target_id, device->lun_id); scsi_set_transfer_settings(settings, &path, /*async_update*/TRUE); xpt_release_path(&path); } } static void _scsi_announce_periph(struct cam_periph *periph, u_int *speed, u_int *freq, struct ccb_trans_settings *cts) { struct ccb_pathinq cpi; struct cam_path *path = periph->path; cam_periph_assert(periph, MA_OWNED); xpt_setup_ccb(&cts->ccb_h, path, CAM_PRIORITY_NORMAL); cts->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; cts->type = CTS_TYPE_CURRENT_SETTINGS; xpt_action((union ccb*)cts); if (cam_ccb_status((union ccb *)cts) != CAM_REQ_CMP) return; /* Ask the SIM for its base transfer speed */ memset(&cpi, 0, sizeof(cpi)); xpt_setup_ccb(&cpi.ccb_h, path, CAM_PRIORITY_NORMAL); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); /* Report connection speed */ *speed = cpi.base_transfer_speed; *freq = 0; if (cts->ccb_h.status == CAM_REQ_CMP && cts->transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0 && spi->sync_offset != 0) { *freq = scsi_calc_syncsrate(spi->sync_period); *speed = *freq; } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) *speed *= (0x01 << spi->bus_width); } if (cts->ccb_h.status == CAM_REQ_CMP && cts->transport == XPORT_FC) { struct ccb_trans_settings_fc *fc = &cts->xport_specific.fc; if (fc->valid & CTS_FC_VALID_SPEED) *speed = fc->bitrate; } if (cts->ccb_h.status == CAM_REQ_CMP && cts->transport == XPORT_SAS) { struct ccb_trans_settings_sas *sas = &cts->xport_specific.sas; if (sas->valid & CTS_SAS_VALID_SPEED) *speed = sas->bitrate; } } static void scsi_announce_periph_sbuf(struct cam_periph *periph, struct sbuf *sb) { struct ccb_trans_settings cts; u_int speed, freq, mb; memset(&cts, 0, sizeof(cts)); _scsi_announce_periph(periph, &speed, &freq, &cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) return; mb = speed / 1000; if (mb > 0) sbuf_printf(sb, "%s%d: %d.%03dMB/s transfers", periph->periph_name, periph->unit_number, mb, speed % 1000); else sbuf_printf(sb, "%s%d: %dKB/s transfers", periph->periph_name, periph->unit_number, speed); /* Report additional information about SPI connections */ if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi; spi = &cts.xport_specific.spi; if (freq != 0) { sbuf_printf(sb, " (%d.%03dMHz%s, offset %d", freq / 1000, freq % 1000, (spi->ppr_options & MSG_EXT_PPR_DT_REQ) != 0 ? " DT" : "", spi->sync_offset); } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0 && spi->bus_width > 0) { if (freq != 0) { sbuf_printf(sb, ", "); } else { sbuf_printf(sb, " ("); } sbuf_printf(sb, "%dbit)", 8 * (0x01 << spi->bus_width)); } else if (freq != 0) { sbuf_printf(sb, ")"); } } if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_FC) { struct ccb_trans_settings_fc *fc; fc = &cts.xport_specific.fc; if (fc->valid & CTS_FC_VALID_WWNN) sbuf_printf(sb, " WWNN 0x%llx", (long long) fc->wwnn); if (fc->valid & CTS_FC_VALID_WWPN) sbuf_printf(sb, " WWPN 0x%llx", (long long) fc->wwpn); if (fc->valid & CTS_FC_VALID_PORT) sbuf_printf(sb, " PortID 0x%x", fc->port); } sbuf_printf(sb, "\n"); } static void scsi_announce_periph(struct cam_periph *periph) { struct ccb_trans_settings cts; u_int speed, freq, mb; _scsi_announce_periph(periph, &speed, &freq, &cts); if (cam_ccb_status((union ccb *)&cts) != CAM_REQ_CMP) return; mb = speed / 1000; if (mb > 0) printf("%s%d: %d.%03dMB/s transfers", periph->periph_name, periph->unit_number, mb, speed % 1000); else printf("%s%d: %dKB/s transfers", periph->periph_name, periph->unit_number, speed); /* Report additional information about SPI connections */ if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi; spi = &cts.xport_specific.spi; if (freq != 0) { printf(" (%d.%03dMHz%s, offset %d", freq / 1000, freq % 1000, (spi->ppr_options & MSG_EXT_PPR_DT_REQ) != 0 ? " DT" : "", spi->sync_offset); } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0 && spi->bus_width > 0) { if (freq != 0) { printf(", "); } else { printf(" ("); } printf("%dbit)", 8 * (0x01 << spi->bus_width)); } else if (freq != 0) { printf(")"); } } if (cts.ccb_h.status == CAM_REQ_CMP && cts.transport == XPORT_FC) { struct ccb_trans_settings_fc *fc; fc = &cts.xport_specific.fc; if (fc->valid & CTS_FC_VALID_WWNN) printf(" WWNN 0x%llx", (long long) fc->wwnn); if (fc->valid & CTS_FC_VALID_WWPN) printf(" WWPN 0x%llx", (long long) fc->wwpn); if (fc->valid & CTS_FC_VALID_PORT) printf(" PortID 0x%x", fc->port); } printf("\n"); } static void scsi_proto_announce_sbuf(struct cam_ed *device, struct sbuf *sb) { scsi_print_inquiry_sbuf(sb, &device->inq_data); } static void scsi_proto_announce(struct cam_ed *device) { scsi_print_inquiry(&device->inq_data); } static void scsi_proto_denounce_sbuf(struct cam_ed *device, struct sbuf *sb) { scsi_print_inquiry_short_sbuf(sb, &device->inq_data); } static void scsi_proto_denounce(struct cam_ed *device) { scsi_print_inquiry_short(&device->inq_data); } static void scsi_proto_debug_out(union ccb *ccb) { char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1]; struct cam_ed *device; if (ccb->ccb_h.func_code != XPT_SCSI_IO) return; device = ccb->ccb_h.path->device; CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_CDB,("%s. CDB: %s\n", scsi_op_desc(scsiio_cdb_ptr(&ccb->csio)[0], &device->inq_data), scsi_cdb_string(scsiio_cdb_ptr(&ccb->csio), cdb_str, sizeof(cdb_str)))); }