diff --git a/share/mk/src.opts.mk b/share/mk/src.opts.mk index a205629fdb2c..2ea0cbf24268 100644 --- a/share/mk/src.opts.mk +++ b/share/mk/src.opts.mk @@ -1,525 +1,519 @@ # # Option file for FreeBSD /usr/src builds, at least the userland and boot loader # portions of the tree. These options generally chose what parts of the tree to # include or omit and are FreeBSD source tree specific. # # Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf # and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} # with sensible (usually) defaults. # # Makefiles must include bsd.opts.mk after defining specific MK_FOO options that # are applicable for that Makefile (typically there are none, but sometimes there # are exceptions). Recursive makes usually add MK_FOO=no for options that they wish # to omit from that make. # # Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO # variable. # # Makefiles may also assume that this file is included by src.opts.mk should it # need variables defined there prior to the end of the Makefile where # bsd.{subdir,lib.bin}.mk is traditionally included. # # The old-style YES_FOO and NO_FOO are being phased out. No new instances of them # should be added. Old instances should be removed since they were just to # bridge the gap between FreeBSD 4 and FreeBSD 5. # # Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an # exception is made for _WITHOUT_SRCONF which turns off this mechanism # completely inside bsd.*.mk files). # .if !target(____) ____: .include # # Define MK_* variables (which are either "yes" or "no") for users # to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the # make(1) environment. # These should be tested with `== "no"' or `!= "no"' in makefiles. # The NO_* variables should only be set by makefiles for variables # that haven't been converted over. # # These options are used by the src builds. Those listed in # __DEFAULT_YES_OPTIONS default to 'yes' and will build unless turned # off. __DEFAULT_NO_OPTIONS will default to 'no' and won't build # unless turned on. Any options listed in 'BROKEN_OPTIONS' will be # hard-wired to 'no'. "Broken" here means not working or # not-appropriate and/or not supported. It doesn't imply something is # wrong with the code. There's not a single good word for this, so # BROKEN was selected as the least imperfect one considered at the # time. Options are added to BROKEN_OPTIONS list on a per-arch basis. # At this time, there's no provision for mutually incompatible options. # Options listed in 'REQUIRED_OPTIONS' will be hard-wired to 'yes'; this # is intended as a transitional measure while options are in the process # of being removed. __DEFAULT_YES_OPTIONS = \ ACCT \ ACPI \ APM \ AT \ AUDIT \ AUTHPF \ AUTOFS \ BHYVE \ BLACKLIST \ BLUETOOTH \ BOOT \ BOOTPARAMD \ BOOTPD \ BSD_CPIO \ BSDINSTALL \ BSNMP \ BZIP2 \ CALENDAR \ CAROOT \ CCD \ CDDL \ CLANG \ CLANG_BOOTSTRAP \ CLEAN \ CPP \ CROSS_COMPILER \ CRYPT \ CUSE \ CXGBETOOL \ DICT \ DMAGENT \ DTRACE \ DYNAMICROOT \ EE \ EFI \ ELFTOOLCHAIN_BOOTSTRAP \ EXAMPLES \ FILE \ FINGER \ FLOPPY \ FORTH \ FP_LIBC \ FREEBSD_UPDATE \ FTP \ GAMES \ GH_BC \ GNU_DIFF \ GOOGLETEST \ GPIO \ HAST \ HTML \ HYPERV \ ICONV \ INET \ INET6 \ INETD \ IPFILTER \ IPFW \ ISCSI \ JAIL \ KDUMP \ KVM \ LDNS \ LDNS_UTILS \ LEGACY_CONSOLE \ LLD \ LLD_BOOTSTRAP \ LLVM_ASSERTIONS \ LLVM_COV \ LLVM_CXXFILT \ LOADER_GELI \ LOADER_KBOOT \ LOADER_LUA \ LOADER_OFW \ LOADER_UBOOT \ LOCALES \ LOCATE \ LPR \ LS_COLORS \ MACHDEP_OPTIMIZATIONS \ MAIL \ MAILWRAPPER \ MAKE \ MLX5TOOL \ NETCAT \ NETGRAPH \ NETLINK \ NETLINK_SUPPORT \ NLS_CATALOGS \ NS_CACHING \ NTP \ NUAGEINIT \ NVME \ OFED \ OPENSSL \ PAM \ PF \ PKGBOOTSTRAP \ PMC \ PPP \ PTHREADS_ASSERTIONS \ QUOTAS \ RADIUS_SUPPORT \ RBOOTD \ RESCUE \ ROUTED \ SENDMAIL \ SERVICESDB \ SETUID_LOGIN \ SHAREDOCS \ SOURCELESS \ SOURCELESS_HOST \ SOURCELESS_UCODE \ STATS \ SYSCONS \ SYSTEM_COMPILER \ SYSTEM_LINKER \ TALK \ TCP_WRAPPERS \ TCSH \ TELNET \ TEXTPROC \ TFTP \ UNBOUND \ USB \ UTMPX \ VI \ VIMAGE \ VT \ WIRELESS \ WPA_SUPPLICANT_EAPOL \ ZFS \ LOADER_ZFS \ ZONEINFO __DEFAULT_NO_OPTIONS = \ BEARSSL \ BHYVE_SNAPSHOT \ CLANG_EXTRAS \ CLANG_FORMAT \ DIALOG \ DETECT_TZ_CHANGES \ DISK_IMAGE_TOOLS_BOOTSTRAP \ DTRACE_ASAN \ DTRACE_TESTS \ EXPERIMENTAL \ HESIOD \ LOADER_BIOS_TEXTONLY \ LOADER_VERBOSE \ LOADER_VERIEXEC_PASS_MANIFEST \ LLVM_BINUTILS \ LLVM_FULL_DEBUGINFO \ MALLOC_PRODUCTION \ OFED_EXTRA \ OPENLDAP \ REPRODUCIBLE_BUILD \ RPCBIND_WARMSTART_SUPPORT \ SORT_THREADS \ ZONEINFO_LEAPSECONDS_SUPPORT \ __REQUIRED_OPTIONS = \ CAPSICUM \ CASPER # LEFT/RIGHT. Left options which default to "yes" unless their corresponding # RIGHT option is disabled. __DEFAULT_DEPENDENT_OPTIONS= \ CLANG_FULL/CLANG \ LLVM_TARGET_ALL/CLANG \ LOADER_VERIEXEC/BEARSSL \ LOADER_EFI_SECUREBOOT/LOADER_VERIEXEC \ LOADER_VERIEXEC_VECTX/LOADER_VERIEXEC \ VERIEXEC/BEARSSL \ __SINGLE_OPTIONS = \ LIBC_MALLOC __LIBC_MALLOC_OPTIONS= jemalloc __LIBC_MALLOC_DEFAULT= jemalloc # MK_*_SUPPORT options which default to "yes" unless their corresponding # MK_* variable is set to "no". # .for var in \ BLACKLIST \ BZIP2 \ INET \ INET6 \ KERBEROS \ KVM \ NETGRAPH \ PAM \ TESTS \ VIMAGE \ WIRELESS __DEFAULT_DEPENDENT_OPTIONS+= ${var}_SUPPORT/${var} .endfor # # Default behaviour of some options depends on the architecture. Unfortunately # this means that we have to test TARGET_ARCH (the buildworld case) as well # as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not # used at all in bsd.*.mk, but we have to make an exception here if we want # to allow defaults for some things like clang to vary by target architecture. # Additional, per-target behavior should be rarely added only after much # gnashing of teeth and grinding of gears. # .if defined(TARGET_ARCH) __T=${TARGET_ARCH} .else __T=${MACHINE_ARCH} .endif # All supported backends for LLVM_TARGET_XXX __LLVM_TARGETS= \ aarch64 \ arm \ powerpc \ riscv \ x86 __LLVM_TARGET_FILT= C/(amd64|i386)/x86/:C/powerpc.*/powerpc/:C/armv[67]/arm/:C/riscv.*/riscv/ .for __llt in ${__LLVM_TARGETS} # Default enable the given TARGET's LLVM_TARGET support .if ${__T:${__LLVM_TARGET_FILT}} == ${__llt} __DEFAULT_YES_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu} # aarch64 needs arm for -m32 support. .elif ${__T} == "aarch64" && ${__llt:Marm*} != "" __DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_ARM/LLVM_TARGET_AARCH64 # Default the rest of the LLVM_TARGETs to the value of MK_LLVM_TARGET_ALL. .else __DEFAULT_DEPENDENT_OPTIONS+= LLVM_TARGET_${__llt:${__LLVM_TARGET_FILT}:tu}/LLVM_TARGET_ALL .endif .endfor __DEFAULT_NO_OPTIONS+=LLVM_TARGET_BPF LLVM_TARGET_MIPS .include .if ${__T} == "i386" || ${__T} == "amd64" __DEFAULT_NO_OPTIONS += FDT .else __DEFAULT_YES_OPTIONS += FDT .endif .if ${__T:Marm*} == "" && ${__T:Mriscv64*} == "" __DEFAULT_YES_OPTIONS+=LLDB .else __DEFAULT_NO_OPTIONS+=LLDB .endif # LIB32 is not supported on all 64-bit architectures. .if (${__T} == "amd64" || ${__T:Maarch64*} != "" || ${__T} == "powerpc64") __DEFAULT_YES_OPTIONS+=LIB32 .else BROKEN_OPTIONS+=LIB32 .endif # EFI doesn't exist on powerpc (well, officially) and doesn't work on i386 .if ${__T:Mpowerpc*} || ${__T} == "i386" BROKEN_OPTIONS+=EFI .endif # Bad coupling for libsecure stuff with bearssl and efi, so broken on EFI .if ${__T:Mpowerpc*} BROKEN_OPTIONS+=BEARSSL # bearssl brings in secure efi stuff xxx .endif # OFW is only for powerpc, exclude others .if ${__T:Mpowerpc*} == "" BROKEN_OPTIONS+=LOADER_OFW .endif # KBOOT is only for powerpc64 (powerpc64le broken) amd64 and aarch64 .if ${__T} != "powerpc64" && ${__T} != "amd64" && ${__T} != "aarch64" BROKEN_OPTIONS+=LOADER_KBOOT .endif # UBOOT is only for arm, and big-endian powerpc .if (${__T:Marm*} == "" && ${__T:Mpowerpc*} == "") || ${__T} == "powerpc64le" BROKEN_OPTIONS+=LOADER_UBOOT .endif # GELI and Lua in loader currently cause boot failures on powerpc. # Further debugging is required -- probably they are just broken on big # endian systems generically (they jump to null pointers or try to read # crazy high addresses, which is typical of endianness problems). .if ${__T:Mpowerpc*} BROKEN_OPTIONS+=LOADER_GELI LOADER_LUA .endif # Kernel TLS is enabled by default on amd64, aarch64 and powerpc64* .if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T:Mpowerpc64*} != "" __DEFAULT_YES_OPTIONS+=OPENSSL_KTLS .else __DEFAULT_NO_OPTIONS+=OPENSSL_KTLS .endif .if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ ${__T:Mpowerpc64*} == "" BROKEN_OPTIONS+=CXGBETOOL BROKEN_OPTIONS+=MLX5TOOL .endif .if ${__T} != "amd64" && ${__T} != "i386" && ${__T} != "aarch64" BROKEN_OPTIONS+=HYPERV .endif -# NVME is only aarch64, x86 and powerpc64* -.if ${__T} != "aarch64" && ${__T} != "amd64" && ${__T} != "i386" && \ - ${__T:Mpowerpc64*} == "" -BROKEN_OPTIONS+=NVME -.endif - .if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ ${__T:Mpowerpc64*} != "" || ${__T:Mriscv64*} != "" __DEFAULT_YES_OPTIONS+=OPENMP .else __DEFAULT_NO_OPTIONS+=OPENMP .endif # Broken on 32-bit arm, kernel module compile errors .if ${__T:Marm*} != "" BROKEN_OPTIONS+= OFED .endif # MK_host_egacy is set by local.sys.mk so is valid here .if ${MACHINE:Nhost*} == "" && ${MK_host_egacy} == "yes" # we cannot expect tests to work BROKEN_OPTIONS+= TESTS .endif .-include .include # # Force some options off if their dependencies are off. # Order is somewhat important. # .if ${MK_CAPSICUM} == "no" MK_CASPER:= no .endif .if ${MK_SOURCELESS} == "no" MK_SOURCELESS_HOST:= no MK_SOURCELESS_UCODE:= no .endif .if ${MK_CDDL} == "no" MK_CTF:= no MK_DTRACE:= no MK_LOADER_ZFS:= no MK_ZFS:= no .endif .if ${MK_CRYPT} == "no" MK_OPENSSL:= no MK_OPENSSH:= no MK_KERBEROS:= no MK_KERBEROS_SUPPORT:= no .endif .if ${MK_DTRACE} == "no" MK_CTF:= no .endif .if ${MK_MAIL} == "no" MK_MAILWRAPPER:= no MK_SENDMAIL:= no MK_DMAGENT:= no .endif .if ${MK_NETGRAPH} == "no" MK_BLUETOOTH:= no .endif .if ${MK_NLS} == "no" MK_NLS_CATALOGS:= no .endif .if ${MK_OPENSSL} == "no" MK_DMAGENT:= no MK_OPENSSH:= no MK_OPENSSL_KTLS:= no MK_KERBEROS:= no MK_KERBEROS_SUPPORT:= no MK_LDNS:= no MK_PKGBOOTSTRAP:= no MK_LOADER_ZFS:= no MK_ZFS:= no .endif .if ${MK_LDNS} == "no" MK_LDNS_UTILS:= no MK_UNBOUND:= no .endif .if ${MK_PF} == "no" MK_AUTHPF:= no .endif .if ${MK_OFED} == "no" MK_OFED_EXTRA:= no .endif .if ${MK_TESTS} == "no" MK_DTRACE_TESTS:= no .endif .if ${MK_TESTS_SUPPORT} == "no" MK_GOOGLETEST:= no .endif .if ${MK_ZONEINFO} == "no" MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no .endif .if ${MK_CROSS_COMPILER} == "no" MK_CLANG_BOOTSTRAP:= no MK_ELFTOOLCHAIN_BOOTSTRAP:= no MK_LLD_BOOTSTRAP:= no .endif .if ${MK_TOOLCHAIN} == "no" MK_CLANG:= no MK_LLD:= no MK_LLDB:= no MK_LLVM_BINUTILS:= no .endif .if ${MK_CLANG} == "no" MK_CLANG_EXTRAS:= no MK_CLANG_FORMAT:= no MK_CLANG_FULL:= no MK_LLVM_COV:= no .endif .if ${MK_ASAN} == "yes" # In order to get sensible backtraces from ASAN we have to install # llvm-symbolizer as /usr/bin/addr2line instead of the elftoolchain version. MK_LLVM_BINUTILS:= yes .endif .if ${MK_LLVM_BINUTILS} == "yes" # MK_LLVM_CXXFILT is a subset of MK_LLVM_BINUTILS and should therefore be # enabled if MK_LLVM_BINUTILS is set. MK_LLVM_CXXFILT:= yes .endif .if ${MK_LOADER_VERIEXEC} == "no" MK_LOADER_VERIEXEC_PASS_MANIFEST := no .endif # # MK_* options whose default value depends on another option. # .for vv in \ GSSAPI/KERBEROS \ MAN_UTILS/MAN .if defined(WITH_${vv:H}) MK_${vv:H}:= yes .elif defined(WITHOUT_${vv:H}) MK_${vv:H}:= no .else MK_${vv:H}:= ${MK_${vv:T}} .endif .endfor # # Set defaults for the MK_*_SUPPORT variables. # .endif # !target(____)