diff --git a/share/man/man5/rc.conf.5 b/share/man/man5/rc.conf.5 index d32a96b706ec..5692228c4db5 100644 --- a/share/man/man5/rc.conf.5 +++ b/share/man/man5/rc.conf.5 @@ -1,4695 +1,4695 @@ .\" Copyright (c) 1995 .\" Jordan K. Hubbard .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd July 1, 2021 .Dt RC.CONF 5 .Os .Sh NAME .Nm rc.conf .Nd system configuration information .Sh DESCRIPTION The file .Nm contains descriptive information about the local host name, configuration details for any potential network interfaces and which services should be started up at system initial boot time. In new installations, the .Nm file is generally initialized by the system installation utility. .Pp The purpose of .Nm is not to run commands or perform system startup actions directly. Instead, it is included by the various generic startup scripts in .Pa /etc which conditionalize their internal actions according to the settings found there. .Pp The .Pa /etc/rc.conf file is included from the file .Pa /etc/defaults/rc.conf , which specifies the default settings for all the available options. Options need only be specified in .Pa /etc/rc.conf when the system administrator wishes to override these defaults. The file .Pa /etc/defaults/vendor.conf allows vendors to override .Fx defaults. The file .Pa /etc/rc.conf.local is used to override settings in .Pa /etc/rc.conf for historical reasons. .Pp The sysrc(8) command provides a scripting interface to modify system config files. .Pp In addition to .Pa /etc/rc.conf.local you can also place smaller configuration files for each .Xr rc 8 script in the .Pa /etc/rc.conf.d directory or .Ao Ar dir Ac Ns Pa /rc.conf.d directories specified in .Va local_startup , which will be included by the .Va load_rc_config function. For jail configurations you could use the file .Pa /etc/rc.conf.d/jail to store jail specific configuration options. If .Va local_startup contains .Pa /usr/local/etc/rc.d and .Pa /opt/conf , .Pa /usr/local/rc.conf.d/jail and .Pa /opt/conf/rc.conf.d/jail will be loaded. If .Ao Ar dir Ac Ns Pa /rc.conf.d/ Ns Ao Ar name Ac is a directory, all of files in the directory will be loaded. Also see the .Va rc_conf_files variable below. .Pp Options are set with .Dq Ar name Ns Li = Ns Ar value assignments that use .Xr sh 1 syntax. The following list provides a name and short description for each variable that can be set in the .Nm file: .Bl -tag -width indent-two .It Va rc_debug .Pq Vt bool If set to .Dq Li YES , enable output of debug messages from rc scripts. This variable can be helpful in diagnosing mistakes when editing or integrating new scripts. Beware that this produces copious output to the terminal and .Xr syslog 3 . .It Va rc_info .Pq Vt bool If set to .Dq Li NO , disable informational messages from the rc scripts. Informational messages are displayed when a condition that is not serious enough to warrant a warning or an error occurs. .It Va rc_startmsgs .Pq Vt bool If set to .Dq Li YES , show .Dq Starting foo: when faststart is used (e.g., at boot time). .It Va early_late_divider .Pq Vt str The name of the script that should be used as the delimiter between the .Dq early and .Dq late stages of the boot process. The early stage should contain all the services needed to get the disks (local or remote) mounted so that the late stage can include scripts contained in the directories listed in the .Va local_startup variable (see below). Thus, the two likely candidates for this value are .Pa mountcritlocal for the typical system, and .Pa mountcritremote if the system needs remote file systems mounted to get access to the .Va local_startup directories; for example when .Pa /usr/local is NFS mounted. For .Pa rc.conf within a .Xr jail 8 .Pa NETWORKING is likely to be an appropriate value. Extreme care should be taken when changing this value, and before changing it one should ensure that there are adequate provisions to recover from a failed boot (such as physical contact with the machine, or reliable remote console access). .It Va always_force_depends .Pq Vt bool Various .Pa rc.d scripts use the force_depend function to check whether required services are already running, and to start them if necessary. By default during boot time this check is bypassed if the required service is enabled in .Pa /etc/rc.conf[.local] . Setting this option will bypass that check at boot time and always test whether or not the service is actually running. Enabling this option is likely to increase your boot time if services are enabled that utilize the force_depend check. .It Ao Ar name Ac Ns Va _chroot .Pq Vt str .Xr chroot 8 to this directory before running the service. .It Ao Ar name Ac Ns Va _user .Pq Vt str Run the service under this user account. .It Ao Ar name Ac Ns Va _group .Pq Vt str Run the chrooted service under this system group. Unlike the _user setting, this setting has no effect if the service is not chrooted. .It Ao Ar name Ac Ns Va _fib .Pq Vt int The .Xr setfib 1 value to run the service under. .It Ao Ar name Ac Ns Va _nice .Pq Vt int The .Xr nice 1 value to run the service under. .It Va apm_enable .Pq Vt bool If set to .Dq Li YES , enable support for Automatic Power Management with the .Xr apm 8 command. .It Va apmd_enable .Pq Vt bool Run .Xr apmd 8 to handle APM event from userland. This also enables support for APM. .It Va apmd_flags .Pq Vt str If .Va apmd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr apmd 8 daemon. .It Va devd_enable .Pq Vt bool Run .Xr devd 8 to handle device added, removed or unknown events from the kernel. .It Va ddb_enable .Pq Vt bool Run .Xr ddb 8 to install .Xr ddb 4 scripts at boot time. .It Va ddb_config .Pq Vt str Configuration file for .Xr ddb 8 . Default .Pa /etc/ddb.conf . .It Va devmatch_enable .Pq Vt bool If set to .Dq Li NO , disable auto-loading of kernel modules with .Xr devmatch 8 . .It Va devmatch_blocklist .Pq Vt str A whitespace-separated list of kernel modules to be ignored by .Xr devmatch 8 . .It Va devmatch_blacklist .Pq Vt str This variable is deprecated. Use .Va devmatch_blocklist instead. A whitespace-separated list of kernel modules to be ignored by .Xr devmatch 8 . .It Va kld_list .Pq Vt str A whitespace-separated list of kernel modules to load right after the local disks are mounted, without any .Pa .ko extension or path. Loading modules at this point in the boot process is much faster than doing it via .Pa /boot/loader.conf for those modules not necessary for mounting local disks. .It Va kldxref_enable .Pq Vt bool Set to .Dq Li NO by default. Set to .Dq Li YES to automatically rebuild .Pa linker.hints files with .Xr kldxref 8 at boot time. .It Va kldxref_clobber .Pq Vt bool Set to .Dq Li NO by default. If .Va kldxref_enable is true, setting to .Dq Li YES will overwrite existing .Pa linker.hints files at boot time. Otherwise, only missing .Pa linker.hints files are generated. .It Va kldxref_module_path .Pq Vt str Empty by default. A semi-colon .Pq Ql \&; delimited list of paths containing .Xr kld 4 modules. If empty, the contents of the .Va kern.module_path .Xr sysctl 8 are used. .It Va powerd_enable .Pq Vt bool If set to .Dq Li YES , enable the system power control facility with the .Xr powerd 8 daemon. .It Va powerd_flags .Pq Vt str If .Va powerd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr powerd 8 daemon. .It Va tmpmfs Controls the creation of a .Pa /tmp memory file system. Always happens if set to .Dq Li YES and never happens if set to .Dq Li NO . If set to anything else, a memory file system is created if .Pa /tmp is not writable. .It Va tmpsize Controls the size of a created .Pa /tmp memory file system. .It Va tmpmfs_flags Extra options passed to the .Xr mdmfs 8 utility when the memory file system for .Pa /tmp is created. The default is .Dq Li "-S" , which inhibits the use of softupdates on .Pa /tmp so that file system space is freed without delay after file truncation or deletion. See .Xr mdmfs 8 for other options you can use in .Va tmpmfs_flags . .It Va varmfs Controls the creation of a .Pa /var memory file system. Always happens if set to .Dq Li YES and never happens if set to .Dq Li NO . If set to anything else, a memory file system is created if .Pa /var is not writable. .It Va varsize Controls the size of a created .Pa /var memory file system. .It Va varmfs_flags Extra options passed to the .Xr mdmfs 8 utility when the memory file system for .Pa /var is created. The default is .Dq Li "-S" , which inhibits the use of softupdates on .Pa /var so that file system space is freed without delay after file truncation or deletion. See .Xr mdmfs 8 for other options you can use in .Va varmfs_flags . .It Va populate_var Controls the automatic population of the .Pa /var file system. Always happens if set to .Dq Li YES and never happens if set to .Dq Li NO . If set to anything else, a memory file system is created if .Pa /var is not writable. Note that this process requires access to certain commands in .Pa /usr before .Pa /usr is mounted on normal systems. .It Va cleanvar_enable .Pq Vt bool Clean the .Pa /var directory. .It Va local_startup .Pq Vt str List of directories to search for startup script files. .It Va script_name_sep .Pq Vt str The field separator to use for breaking down the list of startup script files into individual filenames. The default is a space. It is not necessary to change this unless there are startup scripts with names containing spaces. .It Va hostapd_enable .Pq Vt bool Set to .Dq Li YES to start .Xr hostapd 8 at system boot time. .It Va hostname .Pq Vt str The fully qualified domain name (FQDN) of this host on the network. This should almost certainly be set to something meaningful, even if there is no network connection. If .Xr dhclient 8 is used to set the hostname via DHCP, this variable should be set to an empty string. Within a .Xr jail 8 the hostname is generally already set and this variable may be absent. If this value remains unset when the system is done booting your console login will display the default hostname of .Dq Amnesiac . .It Va nisdomainname .Pq Vt str The NIS domain name of this host, or .Dq Li NO if NIS is not used. .It Va dhclient_program .Pq Vt str Path to the DHCP client program .Pa ( /sbin/dhclient , the .Ox DHCP client, is the default). .It Va dhclient_flags .Pq Vt str Additional flags to pass to the DHCP client program. For the .Ox DHCP client, see the .Xr dhclient 8 manpage for a description of the command line options available. .It Va dhclient_flags_ Ns Aq Ar iface Additional flags to pass to the DHCP client program running on .Ar iface only. When specified, this variable overrides .Va dhclient_flags . .It Va background_dhclient .Pq Vt bool Set to .Dq Li YES to start the DHCP client in background. This can cause trouble with applications depending on a working network, but it will provide a faster startup in many cases. .It Va background_dhclient_ Ns Aq Ar iface When specified, this variable overrides the .Va background_dhclient variable for interface .Ar iface only. .It Va synchronous_dhclient .Pq Vt bool Set to .Dq Li YES to start .Xr dhclient 8 synchronously at startup. This behavior can be overridden on a per-interface basis by replacing the .Dq Li DHCP keyword in the .Va ifconfig_ Ns Aq Ar interface variable with .Dq Li SYNCDHCP or .Dq Li NOSYNCDHCP . .It Va defaultroute_delay .Pq Vt int When set to a positive value, wait up to this long after configuring DHCP interfaces at startup to give the interfaces time to receive a lease. .It Va firewall_enable .Pq Vt bool Set to .Dq Li YES to load firewall rules at startup. If the kernel was not built with .Cd "options IPFIREWALL" , the .Pa ipfw.ko kernel module will be loaded. See also .Va ipfilter_enable . .It Va firewall_script .Pq Vt str This variable specifies the full path to the firewall script to run. The default is .Pa /etc/rc.firewall . .It Va firewall_type .Pq Vt str Names the firewall type from the selection in .Pa /etc/rc.firewall , or the file which contains the local firewall ruleset. Valid selections from .Pa /etc/rc.firewall are: .Pp .Bl -tag -width ".Li workstation" -compact .It Li open unrestricted IP access .It Li closed all IP services disabled, except via .Dq Li lo0 .It Li client basic protection for a workstation .It Li workstation basic protection for a workstation using stateful firewalling .It Li simple basic protection for a LAN. .El .Pp If a filename is specified, the full path must be given. .Pp Most of the predefined rulesets define additional configuration variables. These are documented in .Pa /etc/rc.firewall . .It Va firewall_quiet .Pq Vt bool Set to .Dq Li YES to disable the display of firewall rules on the console during boot. .It Va firewall_logging .Pq Vt bool Set to .Dq Li YES to enable firewall event logging. This is equivalent to the .Dv IPFIREWALL_VERBOSE kernel option. .It Va firewall_logif .Pq Vt bool Set to .Dq Li YES to create pseudo interface .Li ipfw0 for logging. For more details, see .Xr ipfw 8 manual page. .It Va firewall_flags .Pq Vt str Flags passed to .Xr ipfw 8 if .Va firewall_type specifies a filename. .It Va firewall_coscripts .Pq Vt str List of executables and/or rc scripts to run after firewall starts/stops. Default is empty. .\" ----- firewall_nat_enable setting -------------------------------- .It Va firewall_nat_enable .Pq Vt bool The .Xr ipfw 8 equivalent of .Va natd_enable . Setting this to .Dq Li YES will automatically load the .Xr ipfw 8 NAT kernel module if .Va firewall_enable is also set to .Dq Li YES . .It Va firewall_nat_interface .Pq Vt str The .Xr ipfw 8 equivalent of .Va natd_interface . This is the name of the public interface or IP address on which kernel NAT should run. .It Va firewall_nat_flags .Pq Vt str Additional configuration parameters for kernel NAT should be placed here. .It Va firewall_nat64_enable .Pq Vt bool Setting this to .Dq Li YES will automatically load the .Xr ipfw 8 NAT64 kernel module if .Va firewall_enable is also set to .Dq Li YES . .It Va firewall_nptv6_enable .Pq Vt bool Setting this to .Dq Li YES will automatically load the .Xr ipfw 8 NPTv6 kernel module if .Va firewall_enable is also set to .Dq Li YES . .It Va firewall_pmod_enable .Pq Vt bool Setting this to .Dq Li YES will automatically load the .Xr ipfw 8 pmod kernel module if .Va firewall_enable is also set to .Dq Li YES . .It Va dummynet_enable .Pq Vt bool Setting this to .Dq Li YES will automatically load the .Xr dummynet 4 module if .Va firewall_enable is also set to .Dq Li YES . .\" ------------------------------------------------------------------- .It Va ipfw_netflow_enable .Pq Vt bool Setting this to .Dq Li YES will enable netflow logging via .Xr ng_netflow 4 .Pp By default a ipfw rule is inserted and all packets are duplicated with the ngtee command and netflow packets are sent to 127.0.0.1 on the netflow port using protocol version 5. .It Va ipfw_netflow_hook .Pq Vt int netflow hook name, must be numerical (default .Pa 9995 ) . .It Va ipfw_netflow_rule .Pq Vt int ipfw rule number (default .Pa 1000 ) . .It Va ipfw_netflow_ip .Pq Vt str Destination server ip for receiving netflow data (default .Pa 127.0.0.1 ) . .It Va ipfw_netflow_port .Pq Vt int Destination server port for receiving netflow data (default .Pa 9995 ) . .It Va ipfw_netflow_version .Pq Vt int Do not set for using version 5 of the netflow protocol, set it to 9 for using version 9. .It Va ipfw_netflow_fib .Pq Vt int Only match packet in FIB .Pa ipfw_netflow_fib (default is undefined meaning all FIBs). .It Va natd_program .Pq Vt str Path to .Xr natd 8 . .It Va natd_enable .Pq Vt bool Set to .Dq Li YES to enable .Xr natd 8 . .Va firewall_enable must also be set to .Dq Li YES , and .Xr divert 4 sockets must be enabled in the kernel. If the kernel was not built with .Cd "options IPDIVERT" , the .Pa ipdivert.ko kernel module will be loaded. .It Va natd_interface .Pq Vt str This is the name of the public interface on which .Xr natd 8 should run. The interface may be given as an interface name or as an IP address. .It Va natd_flags .Pq Vt str Additional .Xr natd 8 flags should be placed here. The .Fl n or .Fl a flag is automatically added with the above .Va natd_interface as an argument. .\" ----- ipfilter_enable setting -------------------------------- .It Va ipfilter_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr ipf 8 packet filtering. .Pp Typical usage will require putting .Bd -literal ipfilter_enable="YES" ipnat_enable="YES" ipmon_enable="YES" ipfs_enable="YES" .Ed .Pp into .Pa /etc/rc.conf and editing .Pa /etc/ipf.rules and .Pa /etc/ipnat.rules appropriately. .Pp Note that .Va ipfilter_enable and .Va ipnat_enable can be enabled independently. .Va ipmon_enable and .Va ipfs_enable both require at least one of .Va ipfilter_enable and .Va ipnat_enable to be enabled. .Pp Having .Bd -literal options IPFILTER options IPFILTER_LOG options IPFILTER_DEFAULT_BLOCK .Ed .Pp in the kernel configuration file is a good idea, too. .\" ----- ipfilter_program setting ------------------------------ .It Va ipfilter_program .Pq Vt str Path to .Xr ipf 8 (default .Pa /sbin/ipf ) . .\" ----- ipfilter_rules setting -------------------------------- .It Va ipfilter_rules .Pq Vt str Set to .Pa /etc/ipf.rules by default. This variable contains the name of the filter rule definition file. The file is expected to be readable for the .Xr ipf 8 command to execute. .\" ----- ipfilter_flags setting -------------------------------- .It Va ipfilter_flags .Pq Vt str Empty by default. This variable contains flags passed to the .Xr ipf 8 program. .\" ----- ipnat_enable setting ---------------------------------- .It Va ipnat_enable .Pq Vt bool Set to .Dq Li NO by default. Set it to .Dq Li YES to enable .Xr ipnat 8 network address translation. See .Va ipfilter_enable for a detailed discussion. .\" ----- ipnat_program setting --------------------------------- .It Va ipnat_program .Pq Vt str Path to .Xr ipnat 8 (default .Pa /sbin/ipnat ) . .\" ----- ipnat_rules setting ----------------------------------- .It Va ipnat_rules .Pq Vt str Set to .Pa /etc/ipnat.rules by default. This variable contains the name of the file holding the network address translation definition. This file is expected to be readable for the .Xr ipnat 8 command to execute. .\" ----- ipnat_flags setting ----------------------------------- .It Va ipnat_flags .Pq Vt str Empty by default. This variable contains flags passed to the .Xr ipnat 8 program. .\" ----- ipmon_enable setting ---------------------------------- .It Va ipmon_enable .Pq Vt bool Set to .Dq Li NO by default. Set it to .Dq Li YES to enable .Xr ipmon 8 monitoring (logging .Xr ipf 8 and .Xr ipnat 8 events). Setting this variable needs setting .Va ipfilter_enable or .Va ipnat_enable too. See .Va ipfilter_enable for a detailed discussion. .\" ----- ipmon_program setting --------------------------------- .It Va ipmon_program .Pq Vt str Path to .Xr ipmon 8 (default .Pa /sbin/ipmon ) . .\" ----- ipmon_flags setting ----------------------------------- .It Va ipmon_flags .Pq Vt str Set to .Dq Li -Ds by default. This variable contains flags passed to the .Xr ipmon 8 program. Another typical example would be .Dq Fl D Pa /var/log/ipflog to have .Xr ipmon 8 log directly to a file bypassing .Xr syslogd 8 . Make sure to adjust .Pa /etc/newsyslog.conf in such case like this: .Bd -literal /var/log/ipflog 640 10 100 * Z /var/run/ipmon.pid .Ed .\" ----- ipfs_enable setting ----------------------------------- .It Va ipfs_enable .Pq Vt bool Set to .Dq Li NO by default. Set it to .Dq Li YES to enable .Xr ipfs 8 saving the filter and NAT state tables during shutdown and reloading them during startup again. Setting this variable needs setting .Va ipfilter_enable or .Va ipnat_enable to .Dq Li YES too. See .Va ipfilter_enable for a detailed discussion. Note that if .Va kern_securelevel is set to 3, .Va ipfs_enable cannot be used because the raised securelevel will prevent .Xr ipfs 8 from saving the state tables at shutdown time. .\" ----- ipfs_program setting ---------------------------------- .It Va ipfs_program .Pq Vt str Path to .Xr ipfs 8 (default .Pa /sbin/ipfs ) . .\" ----- ipfs_flags setting ------------------------------------ .It Va ipfs_flags .Pq Vt str Empty by default. This variable contains flags passed to the .Xr ipfs 8 program. .\" ----- end of added ipf hook --------------------------------- .It Va pf_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr pf 4 packet filtering. .Pp Typical usage will require putting .Pp .Dl pf_enable="YES" .Pp into .Pa /etc/rc.conf and editing .Pa /etc/pf.conf appropriately. Adding .Pp .Dl "device pf" .Pp builds support for .Xr pf 4 into the kernel, otherwise the kernel module will be loaded. .It Va pf_rules .Pq Vt str Path to .Xr pf 4 ruleset configuration file (default .Pa /etc/pf.conf ) . .It Va pf_program .Pq Vt str Path to .Xr pfctl 8 (default .Pa /sbin/pfctl ) . .It Va pf_flags .Pq Vt str If .Va pf_enable is set to .Dq Li YES , these flags are passed to the .Xr pfctl 8 program when loading the ruleset. .It Va pflog_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr pflogd 8 which logs packets from the .Xr pf 4 packet filter. .It Va pflog_logfile .Pq Vt str If .Va pflog_enable is set to .Dq Li YES this controls where .Xr pflogd 8 stores the logfile (default .Pa /var/log/pflog ) . Check .Pa /etc/newsyslog.conf to adjust logfile rotation for this. .It Va pflog_program .Pq Vt str Path to .Xr pflogd 8 (default .Pa /sbin/pflogd ) . .It Va pflog_flags .Pq Vt str Empty by default. This variable contains additional flags passed to the .Xr pflogd 8 program. .It Va pflog_instances .Pq Vt str If logging to more than one .Xr pflog 4 interface is desired, .Va pflog_instances is set to the list of .Xr pflogd 8 instances that should be started at system boot time. If .Va pflog_instances is set, for each whitespace-separated .Ar element in the list, .Ao Ar element Ac Ns Va _dev and .Ao Ar element Ac Ns Va _logfile elements are assumed to exist. .Ao Ar element Ac Ns Va _dev must contain the .Xr pflog 4 interface to be watched by the named .Xr pflogd 8 instance. .Ao Ar element Ac Ns Va _logfile must contain the name of the logfile that will be used by the .Xr pflogd 8 instance. .It Va ftpproxy_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables .Xr ftp-proxy 8 which supports the .Xr pf 4 packet filter in translating ftp connections. .It Va ftpproxy_flags .Pq Vt str Empty by default. This variable contains additional flags passed to the .Xr ftp-proxy 8 program. .It Va ftpproxy_instances .Pq Vt str Empty by default. If multiple instances of .Xr ftp-proxy 8 are desired at boot time, .Va ftpproxy_instances should contain a whitespace-separated list of instance names. For each .Ar element in the list, a variable named .Ao Ar element Ac Ns Va _flags should be defined, containing the command-line flags to be passed to the .Xr ftp-proxy 8 instance. .It Va pfsync_enable .Pq Vt bool Set to .Dq Li NO by default. Setting this to .Dq Li YES enables exposing .Xr pf 4 state changes to other hosts over the network by means of .Xr pfsync 4 . The .Va pfsync_syncdev variable must also be set then. .It Va pfsync_syncdev .Pq Vt str Empty by default. This variable specifies the name of the network interface .Xr pfsync 4 should operate through. It must be set accordingly if .Va pfsync_enable is set to .Dq Li YES . .It Va pfsync_syncpeer .Pq Vt str Empty by default. This variable is optional. By default, state change messages are sent out on the synchronisation interface using IP multicast packets. The protocol is IP protocol 240, PFSYNC, and the multicast group used is 224.0.0.240. When a peer address is specified using the .Va pfsync_syncpeer option, the peer address is used as a destination for the pfsync traffic, and the traffic can then be protected using .Xr ipsec 4 . See the .Xr pfsync 4 manpage for more details about using .Xr ipsec 4 with .Xr pfsync 4 interfaces. .It Va pfsync_ifconfig .Pq Vt str Empty by default. This variable can contain additional options to be passed to the .Xr ifconfig 8 command used to set up .Xr pfsync 4 . .It Va tcp_extensions .Pq Vt bool Set to .Dq Li YES by default. Setting this to .Dq Li NO disables certain TCP options as described by .Rs .%T "RFC 1323" .Re Setting this to .Dq Li NO might help remedy such problems with connections as randomly hanging or other weird behavior. Some network devices are known to be broken with respect to these options. .It Va log_in_vain .Pq Vt int Set to 0 by default. The .Xr sysctl 8 variables, .Va net.inet.tcp.log_in_vain and .Va net.inet.udp.log_in_vain , as described in .Xr tcp 4 and .Xr udp 4 , are set to the given value. .It Va tcp_keepalive .Pq Vt bool Set to .Dq Li YES by default. Setting to .Dq Li NO will disable probing idle TCP connections to verify that the peer is still up and reachable. .It Va tcp_drop_synfin .Pq Vt bool Set to .Dq Li NO by default. Setting to .Dq Li YES will cause the kernel to ignore TCP frames that have both the SYN and FIN flags set. This prevents OS fingerprinting, but may break some legitimate applications. .It Va icmp_drop_redirect .Pq Vt bool Set to .Dq Li AUTO by default. This setting will be identical to .Dq Li YES , if a dynamicrouting daemon is enabled, because redirect processing may cause performance issues for large routing tables. If no such service is enabled, this setting behaves like a .Dq Li NO . Setting to .Dq Li YES will cause the kernel to ignore ICMP REDIRECT packets. Setting to .Dq Li NO will cause the kernel to process ICMP REDIRECT packets. Refer to .Xr icmp 4 for more information. .It Va icmp_log_redirect .Pq Vt bool Set to .Dq Li NO by default. Setting to .Dq Li YES will cause the kernel to log ICMP REDIRECT packets. Note that the log messages are not rate-limited, so this option should only be used for troubleshooting networks. Refer to .Xr icmp 4 for more information. .It Va icmp_bmcastecho .Pq Vt bool Set to .Dq Li YES to respond to broadcast or multicast ICMP ping packets. Refer to .Xr icmp 4 for more information. .It Va ip_portrange_first .Pq Vt int If not set to .Dq Li NO , this is the first port in the default portrange. Refer to .Xr ip 4 for more information. .It Va ip_portrange_last .Pq Vt int If not set to .Dq Li NO , this is the last port in the default portrange. Refer to .Xr ip 4 for more information. .It Va network_interfaces .Pq Vt str Set to the list of network interfaces to configure on this host or .Dq Li AUTO (the default) for all current interfaces. Setting the .Va network_interfaces variable to anything other than the default is deprecated. Interfaces that the administrator wishes to store configuration for, but not start at boot should be configured with the .Dq Li NOAUTO keyword in their .Va ifconfig_ Ns Aq Ar interface variables as described below. .Pp An .Va ifconfig_ Ns Aq Ar interface variable is also assumed to exist for each value of .Ar interface . When an interface name contains any of the characters .Dq Li .-/+ they are translated to .Dq Li _ before lookup. The variable can contain arguments to .Xr ifconfig 8 , as well as special case-insensitive keywords described below. Such keywords are removed before passing the value to .Xr ifconfig 8 while the order of the other arguments is preserved. .Pp It is possible to add IP alias entries using .Xr ifconfig 8 syntax with the address family keyword such as .Li inet . Assuming that the interface in question was .Li em0 , it might look something like this: .Bd -literal ifconfig_em0_alias0="inet 127.0.0.253 netmask 0xffffffff" ifconfig_em0_alias1="inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp It also possible to configure multiple IP addresses in Classless Inter-Domain Routing .Pq CIDR address notation, whose each address component can be a range like .Li inet 192.0.2.5-23/24 or .Li inet6 2001:db8:1-f::1/64 . This notation allows address and prefix length part only, not the other address modifiers. Note that the maximum number of the generated addresses from a range specification is limited to an integer value specified in .Va netif_ipexpand_max in .Nm because a small typo can unexpectedly generate a large number of addresses. The default value is .Li 2048 . It can be increased by adding the following line into .Nm : .Bd -literal netif_ipexpand_max="4096" .Ed .Pp In the case of .Li 192.0.2.5-23/24 , the address 192.0.2.5 will be configured with the netmask /24 and the addresses 192.0.2.6 to 192.0.2.23 with the non-conflicting netmask /32 as explained in the .Xr ifconfig 8 alias section. Note that this special netmask handling is only for .Li inet , not for the other address families such as .Li inet6 . .Pp With the interface in question being .Li em0 , an example could look like: .Bd -literal ifconfig_em0_alias2="inet 192.0.2.129/27" ifconfig_em0_alias3="inet 192.0.2.1-5/28" .Ed .Pp and so on. .Pp Note that deprecated .Va ipv4_addrs_ Ns Aq Ar interface variable was supported for IPv4 CIDR address notation. The .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n variable replaces it, though .Va ipv4_addrs_ Ns Aq Ar interface is still supported for backward compatibility. .Pp For each .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n entry with an address family keyword, its contents are passed to .Xr ifconfig 8 . Execution stops at the first unsuccessful access, so if something like this is present: .Bd -literal ifconfig_em0_alias0="inet 127.0.0.251 netmask 0xffffffff" ifconfig_em0_alias1="inet 127.0.0.252 netmask 0xffffffff" ifconfig_em0_alias2="inet 127.0.0.253 netmask 0xffffffff" ifconfig_em0_alias4="inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp Then note that alias4 would .Em not be added since the search would stop with the missing .Dq Li alias3 entry. Because of this difficult to manage behavior, there is .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _aliases variable, which has the same functionality as .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n and can have all of entries in a variable like the following: .Bd -literal ifconfig_em0_aliases="\\ inet 127.0.0.251 netmask 0xffffffff \\ inet 127.0.0.252 netmask 0xffffffff \\ inet 127.0.0.253 netmask 0xffffffff \\ inet 127.0.0.254 netmask 0xffffffff" .Ed .Pp It also supports CIDR notation. .Pp If the -.Pa /etc/start_if. Ns Aq Ar interface +.Pa /etc/start_if . Ns Aq Ar interface file is present, it is read and executed by the .Xr sh 1 interpreter before configuring the interface as specified in the .Va ifconfig_ Ns Aq Ar interface and .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n variables. .Pp If a .Va vlans_ Ns Aq Ar interface variable is set, a .Xr vlan 4 interface will be created for each item in the list with the .Ar vlandev argument set to .Ar interface . If a vlan interface's name is a number, then that number is used as the vlan tag and the new vlan interface is named .Ar interface . Ns Ar tag . Otherwise, the vlan tag must be specified via a .Va vlan parameter in the .Va create_args_ Ns Aq Ar interface variable. .Pp To create a vlan device named .Li em0.101 on .Li em0 with the vlan tag 101 and the optional the IPv4 address 192.0.2.1/24: .Bd -literal vlans_em0="101" ifconfig_em0_101="inet 192.0.2.1/24" .Ed .Pp To create a vlan device named .Li myvlan on .Li em0 with the vlan tag 102: .Bd -literal vlans_em0="myvlan" create_args_myvlan="vlan 102" .Ed .Pp If a .Va wlans_ Ns Aq Ar interface variable is set, an .Xr wlan 4 interface will be created for each item in the list with the .Ar wlandev argument set to .Ar interface . Further wlan cloning arguments may be passed to the .Xr ifconfig 8 .Cm create command by setting the .Va create_args_ Ns Aq Ar interface variable. One or more .Xr wlan 4 devices must be created for each wireless devices as of .Fx 8.0 . Debugging flags for .Xr wlan 4 devices as set by .Xr wlandebug 8 may be specified with an .Va wlandebug_ Ns Aq Ar interface variable. The contents of this variable will be passed directly to .Xr wlandebug 8 . .Pp If the .Va ifconfig_ Ns Aq Ar interface contains the keyword .Dq Li NOAUTO then the interface will not be configured at boot or by .Pa /etc/pccard_ether when .Va network_interfaces is set to .Dq Li AUTO . .Pp It is possible to bring up an interface with DHCP by adding .Dq Li DHCP to the .Va ifconfig_ Ns Aq Ar interface variable. For instance, to initialize the .Li em0 device via DHCP, it is possible to use something like: .Bd -literal ifconfig_em0="DHCP" .Ed .Pp If you want to configure your wireless interface with .Xr wpa_supplicant 8 for use with WPA, EAP/LEAP or WEP, you need to add .Dq Li WPA to the .Va ifconfig_ Ns Aq Ar interface variable. .Pp On the other hand, if you want to configure your wireless interface with .Xr hostapd 8 , you need to add .Dq Li HOSTAP to the .Va ifconfig_ Ns Aq Ar interface variable. .Xr hostapd 8 will use the settings from .Pa /etc/hostapd- Ns Ao Ar interface Ac Ns .conf .Pp Finally, you can add .Xr ifconfig 8 options in this variable, in addition to the -.Pa /etc/start_if. Ns Aq Ar interface +.Pa /etc/start_if . Ns Aq Ar interface file. For instance, to configure an .Xr ath 4 wireless device in station mode with an address obtained via DHCP, using WPA authentication and 802.11b mode, it is possible to use something like: .Bd -literal wlans_ath0="wlan0" ifconfig_wlan0="DHCP WPA mode 11b" .Ed .Pp In addition to the .Va ifconfig_ Ns Aq Ar interface form, a fallback variable .Va ifconfig_DEFAULT may be configured. It will be used for all interfaces with no .Va ifconfig_ Ns Aq Ar interface variable. This is intended to replace the no longer supported .Va pccard_ifconfig variable. .Pp It is also possible to rename an interface by doing: .Bd -literal ifconfig_em0_name="net0" ifconfig_net0="inet 192.0.2.1 netmask 0xffffff00" .Ed .It Va ipv6_enable .Pq Vt bool This variable is deprecated. Use .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 and .Va ipv6_activate_all_interfaces if necessary. .Pp If the variable is .Dq Li YES , .Dq Li inet6 accept_rtadv is added to all of .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 and the .Va ipv6_activate_all_interfaces is defined as .Dq Li YES . .It Va ipv6_prefer .Pq Vt bool This variable is deprecated. Use .Va ip6addrctl_policy instead. .Pp If the variable is .Dq Li YES , the default address selection policy table set by .Xr ip6addrctl 8 will be IPv6-preferred. .Pp If the variable is .Dq Li NO , the default address selection policy table set by .Xr ip6addrctl 8 will be IPv4-preferred. .It Va ipv6_activate_all_interfaces .Pq Vt bool This controls initial configuration on IPv6-capable interfaces with no corresponding .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 variable. Note that it is not always necessary to set this variable to .Dq YES to use IPv6 functionality on .Fx . In most cases, just configuring .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 variables works. .Pp If the variable is .Dq Li NO , all interfaces which do not have a corresponding .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 variable will be marked as .Dq Li IFDISABLED at creation. This means that all of IPv6 functionality on that interface is completely disabled to enforce a security policy. If the variable is set to .Dq YES , the flag will be cleared on all of the interfaces. .Pp In most cases, just defining an .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 for an IPv6-capable interface should be sufficient. However, if an interface is added dynamically .Pq by some tunneling protocols such as PPP, for example , it is often difficult to define the variable in advance. In such a case, configuring the .Dq Li IFDISABLED flag can be disabled by setting this variable to .Dq YES . .Pp For more details of the .Dq Li IFDISABLED flag and keywords .Dq Li inet6 ifdisabled , see .Xr ifconfig 8 . .Pp Default is .Dq Li NO . .It Va ipv6_privacy .Pq Vt bool If the variable is .Dq Li YES privacy addresses will be generated for each IPv6 interface as described in RFC 4941. .It Va ipv6_network_interfaces .Pq Vt str This is the IPv6 equivalent of .Va network_interfaces . Normally manual configuration of this variable is not needed. .It Va ipv6_cpe_wanif .Pq Vt str If the variable is set to an interface name, the .Xr ifconfig 8 options .Dq inet6 -no_radr accept_rtadv will be added to the specified interface automatically before evaluating .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 , and two .Xr sysctl 8 variables .Va net.inet6.ip6.rfc6204w3 and .Va net.inet6.ip6.no_radr will be set to 1. .Pp This means the specified interface will accept ICMPv6 Router Advertisement messages on that link and add the discovered routers into the Default Router List. While the other interfaces can still accept RA messages if the .Dq inet6 accept_rtadv option is specified, adding routes into the Default Router List will be disabled by .Dq inet6 no_radr option by default. See .Xr ifconfig 8 for more details. .Pp Note that ICMPv6 Router Advertisement messages will be accepted even when .Va net.inet6.ip6.forwarding is 1 .Pq packet forwarding is enabled when .Va net.inet6.ip6.rfc6204w3 is set to 1. .Pp Default is .Dq Li NO . .It Va ifconfig_ Ns Ao Ar interface Ac Ns _descr .Pq Vt str This assigns arbitrary description to an interface. The .Xr sysctl 8 variable .Va net.ifdescr_maxlen limits its length. This static setting may be overridden by commands started with dynamic interface configuration utilities like .Xr dhclient 8 hooks. The description can be seen with .Xr ifconfig 8 command and it may be exported with .Xr bsnmpd 1 daemon using its MIB-2 module. .It Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 .Pq Vt str IPv6 functionality on an interface should be configured by .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 , instead of setting ifconfig parameters in .Va ifconfig_ Ns Aq Ar interface . If this variable is empty, all of IPv6 configurations on the specified interface by other variables such as .Va ipv6_prefix_ Ns Ao Ar interface Ac will be ignored. .Pp Aliases should be set by .Va ifconfig_ Ns Ao Ar interface Ac Ns Va _alias Ns Aq Ar n with .Dq Li inet6 keyword. For example: .Bd -literal ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" .Ed .Pp Interfaces that have an .Dq Li inet6 accept_rtadv keyword in .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 setting will be automatically configured by SLAAC .Pq StateLess Address AutoConfiguration described in .Rs .%T "RFC 4862" .Re .Pp Note that a link-local address will be automatically configured in addition to the configured global-scope addresses because the IPv6 specifications require it on each link. The address is calculated from the MAC address by using an algorithm defined in .Rs .%T "RFC 4862" .%O "Section 5.3" .Re .Pp If only a link-local address is needed on the interface, the following configuration can be used: .Bd -literal ifconfig_em0_ipv6="inet6 auto_linklocal" .Ed .Pp A link-local address can also be configured manually. This is useful for the default router address of an IPv6 router so that it does not change when the network interface card is replaced. For example: .Bd -literal ifconfig_em0_ipv6="inet6 fe80::1 prefixlen 64" .Ed .It Va ipv6_prefix_ Ns Aq Ar interface .Pq Vt str If one or more prefixes are defined in .Va ipv6_prefix_ Ns Aq Ar interface addresses based on each prefix and the EUI-64 interface index will be configured on that interface. Note that this variable will be ignored when .Va ifconfig_ Ns Ao Ar interface Ac Ns _ipv6 is empty. .Pp For example, the following configuration .Bd -literal ipv6_prefix_em0="2001:db8:1:0 2001:db8:2:0" .Ed .Pp is equivalent to the following: .Bd -literal ifconfig_em0_alias0="inet6 2001:db8:1:: eui64 prefixlen 64" ifconfig_em0_alias1="inet6 2001:db8:1:: prefixlen 64 anycast" ifconfig_em0_alias2="inet6 2001:db8:2:: eui64 prefixlen 64" ifconfig_em0_alias3="inet6 2001:db8:2:: prefixlen 64 anycast" .Ed .Pp These Subnet-Router anycast addresses will be added only when .Va ipv6_gateway_enable is YES. .It Va ipv6_default_interface .Pq Vt str If not set to .Dq Li NO , this is the default output interface for scoped addresses. This works only with ipv6_gateway_enable="NO". .It Va ip6addrctl_enable .Pq Vt bool This variable is to enable configuring default address selection policy table .Pq RFC 3484 . The table can be specified in another variable .Va ip6addrctl_policy . For .Va ip6addrctl_policy the following keywords can be specified: .Dq Li ipv4_prefer , .Dq Li ipv6_prefer , or .Dq Li AUTO . .Pp If .Dq Li ipv4_prefer or .Dq Li ipv6_prefer is specified, .Xr ip6addrctl 8 installs a pre-defined policy table described in Section 10.3 .Pq IPv4-preferred or 2.1 .Pq IPv6-preferred of RFC 3484. .Pp If .Dq Li AUTO is specified, it attempts to read a file .Pa /etc/ip6addrctl.conf first. If this file is found, .Xr ip6addrctl 8 reads and installs it. If not found, a policy is automatically set according to .Va ipv6_activate_all_interfaces variable; if the variable is set to .Dq Li YES the IPv6-preferred one is used. Otherwise IPv4-preferred. .Pp The default value of .Va ip6addrctl_enable and .Va ip6addrctl_policy are .Dq Li YES and .Dq Li AUTO , respectively. .It Va cloned_interfaces .Pq Vt str Set to the list of clonable network interfaces to create on this host. Further cloning arguments may be passed to the .Xr ifconfig 8 .Cm create command for each interface by setting the .Va create_args_ Ns Aq Ar interface variable. If an interface name is specified with .Dq :sticky keyword, the interface will not be destroyed even when .Pa rc.d/netif script is invoked with .Dq stop argument. This is useful when reconfiguring the interface without destroying it. Entries in .Va cloned_interfaces are automatically appended to .Va network_interfaces for configuration. .It Va cloned_interfaces_sticky .Pq Vt bool This variable is to globally enable functionality of .Dq :sticky keyword in .Va cloned_interfaces for all interfaces. The default value is .Dq NO . Even if this variable is specified to .Dq YES , .Dq :nosticky keyword can be used to override it on per interface basis. .It Va gif_interfaces Set to the list of .Xr gif 4 tunnel interfaces to configure on this host. A .Va gifconfig_ Ns Aq Ar interface variable is assumed to exist for each value of .Ar interface . The value of this variable is used to configure the link layer of the tunnel using the .Cm tunnel option to -.Xr ifconfig . +.Xr ifconfig 8 . Additionally, this option ensures that each listed interface is created via the .Cm create option to -.Xr ifconfig +.Xr ifconfig 8 before attempting to configure it. .Pp For example, configure two -.Xr gif +.Xr gif 4 interfaces with: .Bd -literal gif_interfaces="gif0 gif1" gifconfig_gif0="100.64.0.1 100.64.0.2" ifconfig_gif0="inet 10.0.0.1 10.0.0.2 netmask 255.255.255.252" gifconfig_gif1="inet6 2a00::1 2a01::1" ifconfig_gif1="inet 10.1.0.1 10.1.0.2 netmask 255.255.255.252" .Ed .It Va sppp_interfaces .Pq Vt str Set to the list of .Xr sppp 4 interfaces to configure on this host. A .Va spppconfig_ Ns Aq Ar interface variable is assumed to exist for each value of .Ar interface . Each interface should also be configured by a general .Va ifconfig_ Ns Aq Ar interface setting. Refer to .Xr spppcontrol 8 for more information about available options. .It Va ppp_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ppp 8 daemon. .It Va ppp_profile .Pq Vt str The name of the profile to use from .Pa /etc/ppp/ppp.conf . Also used for per-profile overrides of .Va ppp_mode and .Va ppp_nat , and .Va ppp_ Ns Ao Ar profile Ac Ns _unit . When the profile name contains any of the characters .Dq Li .-/+ they are translated to .Dq Li _ for the proposes of the override variable names. .It Va ppp_mode .Pq Vt str Mode in which to run the .Xr ppp 8 daemon. .It Va ppp_ Ns Ao Ar profile Ac Ns _mode .Pq Vt str Overrides the global .Va ppp_mode for .Ar profile . Accepted modes are .Dq Li auto , .Dq Li ddial , .Dq Li direct and .Dq Li dedicated . See the manual for a full description. .It Va ppp_nat .Pq Vt bool If set to .Dq Li YES , enables network address translation. Used in conjunction with .Va gateway_enable allows hosts on private network addresses access to the Internet using this host as a network address translating router. Default is .Dq Li YES . .It Va ppp_ Ns Ao Ar profile Ac Ns _nat .Pq Vt str Overrides the global .Va ppp_nat for .Ar profile . .It Va ppp_ Ns Ao Ar profile Ac Ns _unit .Pq Vt int Set the unit number to be used for this profile. See the manual description of .Fl unit Ns Ar N for details. .It Va ppp_user .Pq Vt str The name of the user under which .Xr ppp 8 should be started. By default, .Xr ppp 8 is started as .Dq Li root . .It Va rc_conf_files .Pq Vt str This option is used to specify a list of files that will override the settings in .Pa /etc/defaults/rc.conf . The files will be read in the order in which they are specified and should include the full path to the file. By default, the files specified are .Pa /etc/rc.conf and .Pa /etc/rc.conf.local .It Va zfs_enable .Pq Vt bool If set to .Dq Li YES , .Pa /etc/rc.d/zfs will attempt to automatically mount ZFS file systems and initialize ZFS volumes (ZVOLs). .It Va gptboot_enable .Pq Vt bool If set to .Dq Li YES , .Pa /etc/rc.d/gptboot will log if the system successfully (or not) booted from a GPT partition, which had the .Ar bootonce attribute set using .Xr gpart 8 utility. .It Va gbde_autoattach_all .Pq Vt bool If set to .Dq Li YES , .Pa /etc/rc.d/gbde will attempt to automatically initialize your .bde devices in .Pa /etc/fstab . .It Va gbde_devices .Pq Vt str List the devices that the script should try to attach, or .Dq Li AUTO . .It Va gbde_lockdir .Pq Vt str The directory where the .Xr gbde 4 lockfiles are located. The default lockfile directory is .Pa /etc . .Pp The lockfile for each individual .Xr gbde 4 device can be overridden by setting the variable .Va gbde_lock_ Ns Aq Ar device , where .Ar device is the encrypted device without the .Dq Pa /dev/ and .Dq Pa .bde parts. .It Va gbde_attach_attempts .Pq Vt int Number of times to attempt attaching to a .Xr gbde 4 device, i.e., how many times the user is asked for the pass-phrase. Default is 3. .It Va geli_devices .Pq Vt str List of devices to automatically attach on boot. Note that .eli devices from .Pa /etc/fstab are automatically appended to this list. .It Va geli_groups .Pq Vt str List of groups containing devices to automatically attach on boot with the same keyfiles and passphrase. This must be accompanied with a corresponding .Va geli_ Ns Ao Ar group Ac Ns Va _devices variable. .It Va geli_tries .Pq Vt int Number of times user is asked for the pass-phrase. If empty, it will be taken from .Va kern.geom.eli.tries sysctl variable. .It Va geli_default_flags .Pq Vt str Default flags to use by .Xr geli 8 when configuring disk encryption. Flags can be configured for every device separately by defining the .Va geli_ Ns Ao Ar device Ac Ns Va _flags variable, and for every group separately by defining the .Va geli_ Ns Ao Ar group Ac Ns Va _flags variable. .It Va geli_autodetach .Pq Vt str Specifies if GELI devices should be marked for detach on last close after file systems are mounted. Default is .Dq Li YES . This can be changed for every device separately by defining the .Va geli_ Ns Ao Ar device Ac Ns Va _autodetach variable. .It Va root_rw_mount .Pq Vt bool Set to .Dq Li YES by default. After the file systems are checked at boot time, the root file system is remounted as read-write if this is set to .Dq Li YES . Diskless systems that mount their root file system from a read-only remote NFS share should set this to .Dq Li NO in their .Pa rc.conf . .It Va fsck_y_enable .Pq Vt bool If set to .Dq Li YES , .Xr fsck 8 will be run with the .Fl y flag if the initial preen of the file systems fails. .It Va background_fsck .Pq Vt bool If set to .Dq Li NO , the system will not attempt to run .Xr fsck 8 in the background where possible. .It Va background_fsck_delay .Pq Vt int The amount of time in seconds to sleep before starting a background .Xr fsck 8 . It defaults to sixty seconds to allow large applications such as the X server to start before disk I/O bandwidth is monopolized by .Xr fsck 8 . If set to a negative number, the background file system check will be delayed indefinitely to allow the administrator to run it at a more convenient time. For example it may be run from .Xr cron 8 by adding a line like .Pp .Dl "0 4 * * * root /etc/rc.d/bgfsck forcestart" .Pp to .Pa /etc/crontab . .It Va netfs_types .Pq Vt str List of file system types that are network-based. This list should generally not be modified by end users. Use .Va extra_netfs_types instead. .It Va extra_netfs_types .Pq Vt str If set to something other than .Dq Li NO (the default), this variable extends the list of file system types for which automatic mounting at startup by .Xr rc 8 should be delayed until the network is initialized. It should contain a whitespace-separated list of network file system descriptor pairs, each consisting of a file system type as passed to .Xr mount 8 and a human-readable, one-word description, joined with a colon .Pq Ql \&: . Extending the default list in this way is only necessary when third party file system types are used. .It Va syslogd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr syslogd 8 daemon. .It Va syslogd_program .Pq Vt str Path to .Xr syslogd 8 (default .Pa /usr/sbin/syslogd ) . .It Va syslogd_flags .Pq Vt str If .Va syslogd_enable is set to .Dq Li YES , these are the flags to pass to .Xr syslogd 8 . .It Va inetd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr inetd 8 daemon. .It Va inetd_program .Pq Vt str Path to .Xr inetd 8 (default .Pa /usr/sbin/inetd ) . .It Va inetd_flags .Pq Vt str If .Va inetd_enable is set to .Dq Li YES , these are the flags to pass to .Xr inetd 8 . .It Va hastd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr hastd 8 daemon. .It Va hastd_program .Pq Vt str Path to .Xr hastd 8 (default .Pa /sbin/hastd ) . .It Va hastd_flags .Pq Vt str If .Va hastd_enable is set to .Dq Li YES , these are the flags to pass to .Xr hastd 8 . .It Va local_unbound_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr unbound 8 daemon as a local caching resolver. .It Va kdc_enable .Pq Vt bool Set to .Dq Li YES to start a Kerberos 5 authentication server at boot time. .It Va kdc_program .Pq Vt str If .Va kdc_enable is set to .Dq Li YES this is the path to Kerberos 5 Authentication Server. .It Va kdc_flags .Pq Vt str Empty by default. This variable contains additional flags to be passed to the Kerberos 5 authentication server. .It Va kadmind_enable .Pq Vt bool Set to .Dq Li YES to start .Xr kadmind 8 , the Kerberos 5 Administration Daemon; set to .Dq Li NO on a slave server. .It Va kadmind_program .Pq Vt str If .Va kadmind_enable is set to .Dq Li YES this is the path to Kerberos 5 Administration Daemon. .It Va kpasswdd_enable .Pq Vt bool Set to .Dq Li YES to start .Xr kpasswdd 8 , the Kerberos 5 Password-Changing Daemon; set to .Dq Li NO on a slave server. .It Va kpasswdd_program .Pq Vt str If .Va kpasswdd_enable is set to .Dq Li YES this is the path to Kerberos 5 Password-Changing Daemon. .It Va kfd_enable .Pq Vt bool Set to .Dq Li YES to start .Xr kfd 8 , the Kerberos 5 ticket forwarding daemon, at the boot time. .It Va kfd_program .Pq Vt str Path to .Xr kfd 8 (default .Pa /usr/libexec/kfd ) . .It Va rwhod_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rwhod 8 daemon at boot time. .It Va rwhod_flags .Pq Vt str If .Va rwhod_enable is set to .Dq Li YES , these are the flags to pass to it. .It Va amd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr amd 8 daemon at boot time. .It Va amd_flags .Pq Vt str If .Va amd_enable is set to .Dq Li YES , these are the flags to pass to it. See the .Xr amd 8 manpage for more information. .It Va amd_map_program .Pq Vt str If set, the specified program is run to get the list of .Xr amd 8 maps. For example, if the .Xr amd 8 maps are stored in NIS, one can set this to run .Xr ypcat 1 to get a list of .Xr amd 8 maps from the .Pa amd.master NIS map. .It Va update_motd .Pq Vt bool If set to .Dq Li YES , .Pa /etc/motd will be updated at boot time to reflect the kernel release being run. If set to .Dq Li NO , .Pa /etc/motd will not be updated. .It Va nfs_client_enable .Pq Vt bool If set to .Dq Li YES , run the NFS client daemons at boot time. .It Va nfs_access_cache .Pq Vt int If .Va nfs_client_enable is set to .Dq Li YES , this can be set to .Dq Li 0 to disable NFS ACCESS RPC caching, or to the number of seconds for which NFS ACCESS results should be cached. A value of 2-10 seconds will substantially reduce network traffic for many NFS operations. .It Va nfs_server_enable .Pq Vt bool If set to .Dq Li YES , run the NFS server daemons at boot time. .It Va nfs_server_flags .Pq Vt str If .Va nfs_server_enable is set to .Dq Li YES , these are the flags to pass to the .Xr nfsd 8 daemon. .It Va nfsv4_server_enable .Pq Vt bool If .Va nfs_server_enable is set to .Dq Li YES and .Va nfsv4_server_enable are set to .Dq Li YES , enable the server for NFSv4 as well as NFSv2 and NFSv3. .It Va nfsuserd_enable .Pq Vt bool If .Va nfsuserd_enable is set to .Dq Li YES , run the nfsuserd daemon, which is needed for NFSv4 in order to map between user/group names vs uid/gid numbers. If .Va nfsv4_server_enable is set to .Dq Li YES , this will be forced enabled. .It Va nfsuserd_flags .Pq Vt str If .Va nfsuserd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr nfsuserd 8 daemon. .It Va nfscbd_enable .Pq Vt bool If .Va nfscbd_enable is set to .Dq Li YES , run the nfscbd daemon, which enables callbacks/delegations for the NFSv4 client. .It Va nfscbd_flags .Pq Vt str If .Va nfscbd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr nfscbd 8 daemon. .It Va mountd_enable .Pq Vt bool If set to .Dq Li YES , and no .Va nfs_server_enable is set, start .Xr mountd 8 , but not .Xr nfsd 8 daemon. It is commonly needed to run CFS without real NFS used. .It Va mountd_flags .Pq Vt str If .Va mountd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr mountd 8 daemon. .It Va weak_mountd_authentication .Pq Vt bool If set to .Dq Li YES , allow services like PCNFSD to make non-privileged mount requests. .It Va nfs_reserved_port_only .Pq Vt bool If set to .Dq Li YES , provide NFS services only on a secure port. .It Va nfs_bufpackets .Pq Vt int If set to a number, indicates the number of packets worth of socket buffer space to reserve on an NFS client. The kernel default is typically 4. Using a higher number may be useful on gigabit networks to improve performance. The minimum value is 2 and the maximum is 64. .It Va rpc_lockd_enable .Pq Vt bool If set to .Dq Li YES and also an NFS server or client, run .Xr rpc.lockd 8 at boot time. .It Va rpc_lockd_flags .Pq Vt str If .Va rpc_lockd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpc.lockd 8 daemon. .It Va rpc_statd_enable .Pq Vt bool If set to .Dq Li YES and also an NFS server or client, run .Xr rpc.statd 8 at boot time. .It Va rpc_statd_flags .Pq Vt str If .Va rpc_statd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpc.statd 8 daemon. .It Va rpcbind_program .Pq Vt str Path to .Xr rpcbind 8 (default .Pa /usr/sbin/rpcbind ) . .It Va rpcbind_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rpcbind 8 service at boot time. .It Va rpcbind_flags .Pq Vt str If .Va rpcbind_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpcbind 8 daemon. .It Va keyserv_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr keyserv 8 daemon on boot for running Secure RPC. .It Va keyserv_flags .Pq Vt str If .Va keyserv_enable is set to .Dq Li YES , these are the flags to pass to .Xr keyserv 8 daemon. .It Va pppoed_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr pppoed 8 daemon at boot time to provide PPP over Ethernet services. .It Va pppoed_ Ns Aq Ar provider .Pq Vt str .Xr pppoed 8 listens to requests to this .Ar provider and ultimately runs .Xr ppp 8 with a .Ar system argument of the same name. .It Va pppoed_flags .Pq Vt str Additional flags to pass to .Xr pppoed 8 . .It Va pppoed_interface .Pq Vt str The network interface to run .Xr pppoed 8 on. This is mandatory when .Va pppoed_enable is set to .Dq Li YES . .It Va ntpdate_enable .Pq Vt bool If set to .Dq Li YES , run .Xr ntpdate 8 at system startup. This command is intended to synchronize the system clock only .Em once from some standard reference. .Pp Note that the use of the .Va ntpd_sync_on_start variable is a preferred alternative to the .Xr ntpdate 8 utility as .Xr ntpdate 8 is to be retired from the NTP distribution. .It Va ntpdate_config .Pq Vt str Configuration file for .Xr ntpdate 8 . Default .Pa /etc/ntp.conf . .It Va ntpdate_hosts .Pq Vt str A whitespace-separated list of NTP servers to synchronize with at startup. The default is to use the servers listed in .Va ntpdate_config , if that file exists. .It Va ntpdate_program .Pq Vt str Path to .Xr ntpdate 8 (default .Pa /usr/sbin/ntpdate ) . .It Va ntpdate_flags .Pq Vt str If .Va ntpdate_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ntpdate 8 command (typically a hostname). .It Va ntpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ntpd 8 command at boot time. .It Va ntpd_program .Pq Vt str Path to .Xr ntpd 8 (default .Pa /usr/sbin/ntpd ) . .It Va ntpd_config .Pq Vt str Path to .Xr ntpd 8 configuration file. Default .Pa /etc/ntp.conf . .It Va ntpd_flags .Pq Vt str If .Va ntpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ntpd 8 daemon. .It Va ntpd_sync_on_start .Pq Vt bool If set to .Dq Li YES , .Xr ntpd 8 is run with the .Fl g flag, which syncs the system's clock on startup. See .Xr ntpd 8 for more information regarding the .Fl g option. This is a preferred alternative to using .Xr ntpdate 8 or specifying the .Va ntpdate_enable variable. .It Va nis_client_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypbind 8 service at system boot time. .It Va nis_client_flags .Pq Vt str If .Va nis_client_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypbind 8 service. .It Va nis_ypldap_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypldap 8 daemon at system boot time. .It Va nis_ypldap_flags .Pq Vt str If .Va nis.ypldap_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypldap 8 daemon. .It Va nis_ypset_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypset 8 daemon at system boot time. .It Va nis_ypset_flags .Pq Vt str If .Va nis_ypset_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypset 8 daemon. .It Va nis_server_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr ypserv 8 daemon at system boot time. .It Va nis_server_flags .Pq Vt str If .Va nis_server_enable is set to .Dq Li YES , these are the flags to pass to the .Xr ypserv 8 daemon. .It Va nis_ypxfrd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rpc.ypxfrd 8 daemon at system boot time. .It Va nis_ypxfrd_flags .Pq Vt str If .Va nis_ypxfrd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpc.ypxfrd 8 daemon. .It Va nis_yppasswdd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rpc.yppasswdd 8 daemon at system boot time. .It Va nis_yppasswdd_flags .Pq Vt str If .Va nis_yppasswdd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rpc.yppasswdd 8 daemon. .It Va rpc_ypupdated_enable .Pq Vt bool If set to .Dq Li YES , run the .Nm rpc.ypupdated daemon at system boot time. .It Va bsnmpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr bsnmpd 1 daemon at system boot time. Be sure to understand the security implications of running SNMP daemon on your host. .It Va bsnmpd_flags .Pq Vt str If .Va bsnmpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr bsnmpd 1 daemon. .It Va defaultrouter .Pq Vt str If not set to .Dq Li NO , create a default route to this host name or IP address (use an IP address if this router is also required to get to the name server!). .It Va defaultrouter_fibN .Pq Vt str If not set to .Dq Li NO , create a default route in FIB N to this host name or IP address. .It Va ipv6_defaultrouter .Pq Vt str The IPv6 equivalent of .Va defaultrouter . .It Va ipv6_defaultrouter_fibN .Pq Vt str The IPv6 equivalent of .Va defaultrouter_fibN . .It Va static_arp_pairs .Pq Vt str Set to the list of static ARP pairs that are to be added at system boot time. For each whitespace separated .Ar element in the value, a .Va static_arp_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm arp Cm -S operation. For example .Bd -literal static_arp_pairs="gw" static_arp_gw="192.168.1.1 00:01:02:03:04:05" .Ed .It Va static_ndp_pairs .Pq Vt str Set to the list of static NDP pairs that are to be added at system boot time. For each whitespace separated .Ar element in the value, a .Va static_ndp_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm ndp Cm -s operation. For example .Bd -literal static_ndp_pairs="gw" static_ndp_gw="2001:db8:3::1 00:01:02:03:04:05" .Ed .It Va static_routes .Pq Vt str Set to the list of static routes that are to be added at system boot time. If not set to .Dq Li NO then for each whitespace separated .Ar element in the value, a .Va route_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm route Cm add operation. For example: .Bd -literal static_routes="ext mcast:gif0 gif0local:gif0" route_ext="-net 10.0.0.0/24 -gateway 192.168.0.1" route_mcast="-net 224.0.0.0/4 -iface gif0" route_gif0local="-host 169.254.1.1 -iface lo0" .Ed .Pp When an .Ar element is in the form of .Li name:ifname , the route is specific to the interface .Li ifname . .It Va ipv6_static_routes .Pq Vt str The IPv6 equivalent of .Va static_routes . If not set to .Dq Li NO then for each whitespace separated .Ar element in the value, a .Va ipv6_route_ Ns Aq Ar element variable is assumed to exist whose contents will later be passed to a .Dq Nm route Cm add Fl inet6 operation. .It Va gateway_enable .Pq Vt bool If set to .Dq Li YES , configure host to act as an IP router, e.g.\& to forward packets between interfaces. .It Va ipv6_gateway_enable .Pq Vt bool The IPv6 equivalent of .Va gateway_enable . .It Va routed_enable .Pq Vt bool If set to .Dq Li YES , run a routing daemon of some sort, based on the settings of .Va routed_program and .Va routed_flags . .It Va route6d_enable .Pq Vt bool The IPv6 equivalent of .Va routed_enable . If set to .Dq Li YES , run a routing daemon of some sort, based on the settings of .Va route6d_program and .Va route6d_flags . .It Va routed_program .Pq Vt str If .Va routed_enable is set to .Dq Li YES , this is the name of the routing daemon to use. .It Va route6d_program .Pq Vt str The IPv6 equivalent of .Va routed_program . .It Va routed_flags .Pq Vt str If .Va routed_enable is set to .Dq Li YES , these are the flags to pass to the routing daemon. .It Va route6d_flags .Pq Vt str The IPv6 equivalent of .Va routed_flags . .It Va rtadvd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rtadvd 8 daemon at boot time. The .Xr rtadvd 8 utility sends ICMPv6 Router Advertisement messages to the interfaces specified in .Va rtadvd_interfaces . This should only be enabled with great care. You may want to fine-tune .Xr rtadvd.conf 5 . .It Va rtadvd_interfaces .Pq Vt str If .Va rtadvd_enable is set to .Dq Li YES this is the list of interfaces to use. .It Va arpproxy_all .Pq Vt bool If set to .Dq Li YES , enable global proxy ARP. .It Va forward_sourceroute .Pq Vt bool If set to .Dq Li YES and .Va gateway_enable is also set to .Dq Li YES , source-routed packets are forwarded. .It Va accept_sourceroute .Pq Vt bool If set to .Dq Li YES , the system will accept source-routed packets directed at it. .It Va rarpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr rarpd 8 daemon at system boot time. .It Va rarpd_flags .Pq Vt str If .Va rarpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr rarpd 8 daemon. .It Va bootparamd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr bootparamd 8 daemon at system boot time. .It Va bootparamd_flags .Pq Vt str If .Va bootparamd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr bootparamd 8 daemon. .It Va stf_interface_ipv4addr .Pq Vt str If not set to .Dq Li NO , this is the local IPv4 address for 6to4 (IPv6 over IPv4 tunneling interface). Specify this entry to enable the 6to4 interface. .It Va stf_interface_ipv4plen .Pq Vt int Prefix length for 6to4 IPv4 addresses, to limit peer address range. An effective value is 0-31. .It Va stf_interface_ipv6_ifid .Pq Vt str IPv6 interface ID for .Xr stf 4 . This can be set to .Dq Li AUTO . .It Va stf_interface_ipv6_slaid .Pq Vt str IPv6 Site Level Aggregator for .Xr stf 4 . .It Va ipv6_ipv4mapping .Pq Vt bool If set to .Dq Li YES this enables IPv4 mapped IPv6 address communication (like .Li ::ffff:a.b.c.d ) . .It Va rtsold_enable .Pq Vt bool Set to .Dq Li YES to enable the .Xr rtsold 8 daemon to send ICMPv6 Router Solicitation messages. .It Va rtsold_flags .Pq Vt str If .Va rtsold_enable is set to .Dq Li YES , these are the flags to pass to .Xr rtsold 8 . .It Va rtsol_flags .Pq Vt str For interfaces configured with the .Dq Li inet6 accept_rtadv keyword, these are the flags to pass to .Xr rtsol 8 . .Pp Note that .Va rtsold_enable is mutually exclusive to .Va rtsol_flags ; .Va rtsold_enable takes precedence. .It Va keybell .Pq Vt str The keyboard bell sound. Set to .Dq Li normal , .Dq Li visual , .Dq Li off , or .Dq Li NO if the default behavior is desired. For details, refer to the .Xr kbdcontrol 1 manpage. .It Va keyboard .Pq Vt str If set to a non-null string, the virtual console's keyboard input is set to this device. .It Va keymap .Pq Vt str If set to .Dq Li NO , no keymap is installed, otherwise the value is used to install the keymap file found in .Pa /usr/share/syscons/keymaps/ Ns Ao Ar value Ac Ns Pa .kbd (if using .Xr syscons 4 ) or .Pa /usr/share/vt/keymaps/ Ns Ao Ar value Ac Ns Pa .kbd (if using .Xr vt 4 ) . .It Va keyrate .Pq Vt str The keyboard repeat speed. Set to .Dq Li slow , .Dq Li normal , .Dq Li fast , or .Dq Li NO if the default behavior is desired. .It Va keychange .Pq Vt str If not set to .Dq Li NO , attempt to program the function keys with the value. The value should be a single string of the form: .Dq Ar funkey_number new_value Op Ar funkey_number new_value ... . .It Va cursor .Pq Vt str Can be set to the value of .Dq Li normal , .Dq Li blink , .Dq Li destructive , or .Dq Li NO to set the cursor behavior explicitly or choose the default behavior. .It Va scrnmap .Pq Vt str If set to .Dq Li NO , no screen map is installed, otherwise the value is used to install the screen map file in .Pa /usr/share/syscons/scrnmaps/ Ns Aq Ar value . This parameter is ignored when using .Xr vt 4 as the console driver. .It Va font8x16 .Pq Vt str If set to .Dq Li NO , the default 8x16 font value is used for screen size requests, otherwise the value in .Pa /usr/share/syscons/fonts/ Ns Aq Ar value or .Pa /usr/share/vt/fonts/ Ns Aq Ar value is used (depending on the console driver being used). .It Va font8x14 .Pq Vt str If set to .Dq Li NO , the default 8x14 font value is used for screen size requests, otherwise the value in .Pa /usr/share/syscons/fonts/ Ns Aq Ar value or .Pa /usr/share/vt/fonts/ Ns Aq Ar value is used (depending on the console driver being used). .It Va font8x8 .Pq Vt str If set to .Dq Li NO , the default 8x8 font value is used for screen size requests, otherwise the value in .Pa /usr/share/syscons/fonts/ Ns Aq Ar value or .Pa /usr/share/vt/fonts/ Ns Aq Ar value is used (depending on the console driver being used). .It Va blanktime .Pq Vt int If set to .Dq Li NO , the default screen blanking interval is used, otherwise it is set to .Ar value seconds. .It Va saver .Pq Vt str If not set to .Dq Li NO , this is the actual screen saver to use .Li ( blank , snake , daemon , etc). .It Va moused_nondefault_enable .Pq Vt str If set to .Dq Li NO , the mouse device specified on the command line is not automatically treated as enabled by the .Pa /etc/rc.d/moused script. Having this variable set to .Dq Li YES allows a .Xr usb 4 mouse, for example, to be enabled as soon as it is plugged in. .It Va moused_enable .Pq Vt str If set to .Dq Li YES , the .Xr moused 8 daemon is started for doing cut/paste selection on the console. .It Va moused_type .Pq Vt str This is the protocol type of the mouse connected to this host. This variable must be set if .Va moused_enable is set to .Dq Li YES . The .Xr moused 8 daemon is able to detect the appropriate mouse type automatically in many cases. Set this variable to .Dq Li auto to let the daemon detect it, or select one from the following list if the automatic detection fails. .Pp If the mouse is attached to the PS/2 mouse port, choose .Dq Li auto or .Dq Li ps/2 , regardless of the brand and model of the mouse. Likewise, if the mouse is attached to the bus mouse port, choose .Dq Li auto or .Dq Li busmouse . All other protocols are for serial mice and will not work with the PS/2 and bus mice. If this is a USB mouse, .Dq Li auto is the only protocol type which will work. .Pp .Bl -tag -width ".Li x10mouseremote" -compact .It Li microsoft Microsoft mouse (serial) .It Li intellimouse Microsoft IntelliMouse (serial) .It Li mousesystems Mouse systems Corp.\& mouse (serial) .It Li mmseries MM Series mouse (serial) .It Li logitech Logitech mouse (serial) .It Li busmouse A bus mouse .It Li mouseman Logitech MouseMan and TrackMan (serial) .It Li glidepoint ALPS GlidePoint (serial) .It Li thinkingmouse Kensington ThinkingMouse (serial) .It Li ps/2 PS/2 mouse .It Li mmhittab MM HitTablet (serial) .It Li x10mouseremote X10 MouseRemote (serial) .It Li versapad Interlink VersaPad (serial) .El .Pp Even if the mouse is not in the above list, it may be compatible with one in the list. Refer to the manual page for .Xr moused 8 for compatibility information. .Pp It should also be noted that while this is enabled, any other client of the mouse (such as an X server) should access the mouse through the virtual mouse device, .Pa /dev/sysmouse , and configure it as a .Dq Li sysmouse type mouse, since all mouse data is converted to this single canonical format when using .Xr moused 8 . If the client program does not support the .Dq Li sysmouse type, specify the .Dq Li mousesystems type. It is the second preferred type. .It Va moused_port .Pq Vt str If .Va moused_enable is set to .Dq Li YES , this is the actual port the mouse is on. It might be .Pa /dev/cuau0 for a COM1 serial mouse, or .Pa /dev/psm0 for a PS/2 mouse, for example. .It Va moused_flags .Pq Vt str If .Va moused_flags is set, its value is used as an additional set of flags to pass to the .Xr moused 8 daemon. .It Va "moused_" Ns Ar XXX Ns Va "_flags" When .Va moused_nondefault_enable is enabled, and a .Xr moused 8 daemon is started for a non-default port, the .Va "moused_" Ns Ar XXX Ns Va "_flags" set of options has precedence over and replaces the default .Va moused_flags (where .Ar XXX is the name of the non-default port, i.e.,\& .Ar ums0 ) . By setting .Va "moused_" Ns Ar XXX Ns Va "_flags" it is possible to set up a different set of default flags for each .Xr moused 8 instance. For example, you can use .Dq Li "-3" for the default .Va moused_flags to make your laptop's touchpad more comfortable to use, but an empty set of options for .Va moused_ums0_flags when your .Xr usb 4 mouse has three or more buttons. .It Va mousechar_start .Pq Vt int If set to .Dq Li NO , the default mouse cursor character range .Li 0xd0 Ns - Ns Li 0xd3 is used, otherwise the range start is set to .Ar value character, see .Xr vidcontrol 1 . Use if the default range is occupied in the language code table. .It Va allscreens_flags .Pq Vt str If set, .Xr vidcontrol 1 is run with these options for each of the virtual terminals .Pq Pa /dev/ttyv* . For example, .Dq Fl m Cm on will enable the mouse pointer on all virtual terminals if .Va moused_enable is set to .Dq Li YES . .It Va allscreens_kbdflags .Pq Vt str If set, .Xr kbdcontrol 1 is run with these options for each of the virtual terminals .Pq Pa /dev/ttyv* . For example, .Dq Fl h Li 200 will set the .Xr syscons 4 or .Xr vt 4 scrollback (history) buffer to 200 lines. .It Va cron_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr cron 8 daemon at system boot time. .It Va cron_program .Pq Vt str Path to .Xr cron 8 (default .Pa /usr/sbin/cron ) . .It Va cron_flags .Pq Vt str If .Va cron_enable is set to .Dq Li YES , these are the flags to pass to .Xr cron 8 . .It Va cron_dst .Pq Vt bool If set to .Dq Li YES , enable the special handling of transitions to and from the Daylight Saving Time in .Xr cron 8 (equivalent to using the flag .Fl s ) . .It Va lpd_program .Pq Vt str Path to .Xr lpd 8 (default .Pa /usr/sbin/lpd ) . .It Va lpd_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr lpd 8 daemon at system boot time. .It Va lpd_flags .Pq Vt str If .Va lpd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr lpd 8 daemon. .It Va chkprintcap_enable .Pq Vt bool If set to .Dq Li YES , run the .Xr chkprintcap 8 command before starting the .Xr lpd 8 daemon. .It Va chkprintcap_flags .Pq Vt str If .Va lpd_enable and .Va chkprintcap_enable are set to .Dq Li YES , these are the flags to pass to the .Xr chkprintcap 8 program. The default is .Dq Li -d , which causes missing directories to be created. .It Va mta_start_script .Pq Vt str This variable specifies the full path to the script to run to start a mail transfer agent. The default is .Pa /etc/rc.sendmail . The .Va sendmail_* variables which .Pa /etc/rc.sendmail uses are documented in the .Xr rc.sendmail 8 manual page. .It Va dumpdev .Pq Vt str Indicates the device (usually a swap partition) to which a crash dump should be written in the event of a system crash. If the value of this variable is .Dq Li AUTO , the first suitable swap device listed in .Pa /etc/fstab will be used as dump device. Otherwise, the value of this variable is passed as the argument to .Xr dumpon 8 and .Xr savecore 8 . To disable crash dumps, set this variable to .Dq Li NO . .It Va dumpon_flags .Pq Vt str Flags to pass to .Xr dumpon 8 when configuring .Va dumpdev as the system dump device. .It Va dumpdir .Pq Vt str When the system reboots after a crash and a crash dump is found on the device specified by the .Va dumpdev variable, .Xr savecore 8 will save that crash dump and a copy of the kernel to the directory specified by the .Va dumpdir variable. The default value is .Pa /var/crash . Set to .Dq Li NO to not run .Xr savecore 8 at boot time when .Va dumpdir is set. .It Va savecore_enable .Pq Vt bool If set to .Dq Li NO , disable automatic extraction of the crash dump from the .Va dumpdev . .It Va savecore_flags .Pq Vt str If crash dumps are enabled, these are the flags to pass to the .Xr savecore 8 utility. .It Va quota_enable .Pq Vt bool Set to .Dq Li YES to turn on user and group disk quotas on system startup via the .Xr quotaon 8 command for all file systems marked as having quotas enabled in .Pa /etc/fstab . The kernel must be built with .Cd "options QUOTA" for disk quotas to function. .It Va check_quotas .Pq Vt bool Set to .Dq Li YES to enable user and group disk quota checking via the .Xr quotacheck 8 command. .It Va quotacheck_flags .Pq Vt str If .Va quota_enable is set to .Dq Li YES , and .Va check_quotas is set to .Dq Li YES , these are the flags to pass to the .Xr quotacheck 8 utility. The default is .Dq Li "-a" , which checks quotas for all file systems with quotas enabled in .Pa /etc/fstab . .It Va quotaon_flags .Pq Vt str If .Va quota_enable is set to .Dq Li YES , these are the flags to pass to the .Xr quotaon 8 utility. The default is .Dq Li "-a" , which enables quotas for all file systems with quotas enabled in .Pa /etc/fstab . .It Va quotaoff_flags .Pq Vt str If .Va quota_enable is set to .Dq Li YES , these are the flags to pass to the .Xr quotaoff 8 utility when shutting down the quota system. The default is .Dq Li "-a" , which disables quotas for all file systems with quotas enabled in .Pa /etc/fstab . .It Va accounting_enable .Pq Vt bool Set to .Dq Li YES to enable system accounting through the .Xr accton 8 facility. .It Va firstboot_sentinel .Pq Vt str This variable specifies the full path to a .Dq first boot sentinel file. If a file exists with this path, .Pa rc.d scripts with the .Dq firstboot keyword will be run on startup and the sentinel file will be deleted after the boot process completes. The sentinel file must be located on a writable file system which is mounted no later than .Va early_late_divider to function properly. The default is .Pa /firstboot . .It Va linux_enable .Pq Vt bool Set to .Dq Li YES to enable Linux/ELF binary emulation at system initial boot time. .It Va sysvipc_enable .Pq Vt bool If set to .Dq Li YES , load System V IPC primitives at boot time. .It Va clear_tmp_enable .Pq Vt bool Set to .Dq Li YES to have .Pa /tmp cleaned at startup. .It Va clear_tmp_X .Pq Vt bool Set to .Dq Li NO to disable removing of X11 lock files, and the removal and (secure) recreation of the various socket directories for X11 related programs. .It Va ldconfig_paths .Pq Vt str Set to the list of shared library paths to use with .Xr ldconfig 8 . NOTE: .Pa /lib and .Pa /usr/lib will always be added first, so they need not appear in this list. .It Va ldconfig32_paths .Pq Vt str Set to the list of 32-bit compatibility shared library paths to use with .Xr ldconfig 8 . .It Va ldconfig_insecure .Pq Vt bool The .Xr ldconfig 8 utility normally refuses to use directories which are writable by anyone except root. Set this variable to .Dq Li YES to disable that security check during system startup. .It Va ldconfig_local_dirs .Pq Vt str Set to the list of local .Xr ldconfig 8 directories. The names of all files in the directories listed will be passed as arguments to .Xr ldconfig 8 . .It Va ldconfig_local32_dirs .Pq Vt str Set to the list of local 32-bit compatibility .Xr ldconfig 8 directories. The names of all files in the directories listed will be passed as arguments to .Dq Nm ldconfig Fl 32 . .It Va kern_securelevel_enable .Pq Vt bool Set to .Dq Li YES to set the kernel security level at system startup. .It Va kern_securelevel .Pq Vt int The kernel security level to set at startup. The allowed range of .Ar value ranges from \-1 (the compile time default) to 3 (the most secure). See .Xr security 7 for the list of possible security levels and their effect on system operation. .It Va sshd_program .Pq Vt str Path to the SSH server program .Pa ( /usr/sbin/sshd is the default). .It Va sshd_enable .Pq Vt bool Set to .Dq Li YES to start .Xr sshd 8 at system boot time. .It Va sshd_flags .Pq Vt str If .Va sshd_enable is set to .Dq Li YES , these are the flags to pass to the .Xr sshd 8 daemon. .It Va ftpd_program .Pq Vt str Path to the FTP server program .Pa ( /usr/libexec/ftpd is the default). .It Va ftpd_enable .Pq Vt bool Set to .Dq Li YES to start .Xr ftpd 8 as a stand-alone daemon at system boot time. .It Va ftpd_flags .Pq Vt str If .Va ftpd_enable is set to .Dq Li YES , these are the additional flags to pass to the .Xr ftpd 8 daemon. .It Va watchdogd_enable .Pq Vt bool If set to .Dq Li YES , start the .Xr watchdogd 8 daemon at boot time. This requires that the kernel have been compiled with a .Xr watchdog 4 compatible device. .It Va watchdogd_flags .Pq Vt str If .Va watchdogd_enable is set to .Dq Li YES , these are the flags passed to the .Xr watchdogd 8 daemon. .It Va watchdogd_timeout .Pq Vt int If .Va watchdogd_enable is set to .Dq Li YES , this is a timeout that will be used by the .Xr watchdogd 8 daemon. If this option is set, it overrides .Fl t in .Va watchdogd_flags . .It Va watchdogd_shutdown_timeout .Pq Vt int If .Va watchdogd_enable is set to .Dq Li YES , this is a timeout that will be set by the .Xr watchdogd 8 daemon when it exits during the system shutdown. This timeout will not be set when returning to the single-user mode or when the watchdogd service is stopped individually using the .Xr service 8 command or the rc.d script. Note that the timeout will be applied if .Xr watchdogd 8 is stopped outside of .Xr rc 8 framework. If this option is set, it overrides .Fl x in .Va watchdogd_flags . .It Va devfs_rulesets .Pq Vt str List of files containing sets of rules for .Xr devfs 8 . .It Va devfs_system_ruleset .Pq Vt str Rule name(s) to apply to the system .Pa /dev itself. .It Va devfs_set_rulesets .Pq Vt str Pairs of already-mounted .Pa dev directories and rulesets that should be applied to them. For example: /mount/dev=ruleset_name .It Va devfs_load_rulesets .Pq Vt bool If set, always load the default rulesets listed in .Va devfs_rulesets . .It Va performance_cx_lowest .Pq Vt str CPU idle state to use while on AC power. The string .Dq Li LOW indicates that .Xr acpi 4 should use the lowest power state available while .Dq Li HIGH indicates that the lowest latency state (less power savings) should be used. .It Va performance_cpu_freq .Pq Vt str CPU clock frequency to use while on AC power. The string .Dq Li LOW indicates that .Xr cpufreq 4 should use the lowest frequency available while .Dq Li HIGH indicates that the highest frequency (less power savings) should be used. .It Va economy_cx_lowest .Pq Vt str CPU idle state to use when off AC power. The string .Dq Li LOW indicates that .Xr acpi 4 should use the lowest power state available while .Dq Li HIGH indicates that the lowest latency state (less power savings) should be used. .It Va economy_cpu_freq .Pq Vt str CPU clock frequency to use when off AC power. The string .Dq Li LOW indicates that .Xr cpufreq 4 should use the lowest frequency available while .Dq Li HIGH indicates that the highest frequency (less power savings) should be used. .It Va jail_enable .Pq Vt bool If set to .Dq Li NO , any configured jails will not be started. .It Va jail_conf .Pq Vt str The configuration filename used by .Xr jail 8 utility. The default value is .Pa /etc/jail.conf . .It Va jail_parallel_start .Pq Vt bool If set to .Dq Li YES , all configured jails will be started in the background (in parallel). .It Va jail_flags .Pq Vt str Unset by default. When set, use as default value for .Va jail_ Ns Ao Ar jname Ac Ns Va _flags for every jail in .Va jail_list . .It Va jail_list .Pq Vt str A space-delimited list of jail names. When left empty, all of the .Xr jail 8 instances defined in the configuration file are started. The names specified in this list control the jail startup order. .Xr jail 8 instances missing from .Va jail_list must be started manually. Note that a jail's .Va depend parameter in the configuration file may override this list. .It Va jail_reverse_stop .Pq Vt bool When set to .Dq Li YES , all configured jails in .Va jail_list are stopped in reverse order. .It Va jail_ Ns * variables Note that older releases supported per-jail configuration via .Nm variables. For example, hostname of a jail named .Li vjail was able to be set by .Li jail_vjail_hostname . These per-jail configuration variables are now obsolete in favor of .Xr jail 8 configuration file. For backward compatibility, when per-jail configuration variables are defined, .Xr jail 8 configuration files are created as -.Pa /var/run/jail. Ns Ao Ar jname Ac Ns Pa .conf +.Pa /var/run/jail . Ns Ao Ar jname Ac Ns Pa .conf and used. .Pp The following per-jail parameters are handled by .Pa rc.d/jail script out of their corresponding .Nm variables. In addition to them, parameters in .Va jail_ Ns Ao Ar jname Ac Ns Va _parameters will be added to the configuration file. They must be a semi-colon .Pq Ql \&; delimited list of .Dq key=value . For more details, see .Xr jail 8 manual page. .Bl -tag -width "host.hostname" -offset indent .It Li path set from .Va jail_ Ns Ao Ar jname Ac Ns Va _rootdir .It Li host.hostname set from .Va jail_ Ns Ao Ar jname Ac Ns Va _hostname .It Li exec.consolelog set from .Va jail_ Ns Ao Ar jname Ac Ns Va _consolelog . The default value is .Pa /var/log/jail_ Ao Ar jname Ac Pa _console.log . .It Li interface set from .Va jail_ Ns Ao Ar jname Ac Ns Va _interface . .It Li vnet.interface set from .Va jail_ Ns Ao Ar jname Ac Ns Va _vnet_interface . This implies .Li vnet parameter will be enabled and cannot be specified with .Va jail_ Ns Ao Ar jname Ac Ns Va _interface , .Va jail_ Ns Ao Ar jname Ac Ns Va _ip and/or .Va jail_ Ns Ao Ar jname Ac Ns Va _ip_multi Ns Aq Ar n at the same time. .It Li fstab set from .Va jail_ Ns Ao Ar jname Ac Ns Va _fstab .It Li mount set from .Va jail_ Ns Ao Ar jname Ac Ns Va _procfs_enable . .It Li exec.fib set from .Va jail_ Ns Ao Ar jname Ac Ns Va _fib .It Li exec.start set from .Va jail_ Ns Ao Ar jname Ac Ns Va _exec_start . The parameter name was .Li command in some older releases. .It Li exec.prestart set from .Va jail_ Ns Ao Ar jname Ac Ns Va _exec_prestart .It Li exec.poststart set from .Va jail_ Ns Ao Ar jname Ac Ns Va _exec_poststart .It Li exec.stop set from .Va jail_ Ns Ao Ar jname Ac Ns Va _exec_stop .It Li exec.prestop set from .Va jail_ Ns Ao Ar jname Ac Ns Va _exec_prestop .It Li exec.poststop set from .Va jail_ Ns Ao Ar jname Ac Ns Va _exec_poststop .It Li ip4.addr set if .Va jail_ Ns Ao Ar jname Ac Ns Va _ip or .Va jail_ Ns Ao Ar jname Ac Ns Va _ip_multi Ns Aq Ar n contain IPv4 addresses .It Li ip6.addr set if .Va jail_ Ns Ao Ar jname Ac Ns Va _ip or .Va jail_ Ns Ao Ar jname Ac Ns Va _ip_multi Ns Aq Ar n contain IPv6 addresses .It Li allow.mount set from .Va jail_ Ns Ao Ar jname Ac Ns Va _mount_enable .It Li mount.devfs set from .Va jail_ Ns Ao Ar jname Ac Ns Va _devfs_enable .It Li devfs_ruleset set from .Va jail_ Ns Ao Ar jname Ac Ns Va _devfs_ruleset . This must be an integer, not a string. .It Li mount.fdescfs set from .Va jail_ Ns Ao Ar jname Ac Ns Va _fdescfs_enable .It Li allow.set_hostname set from .Va jail_ Ns Ao Ar jname Ac Ns Va _set_hostname_allow .It Li allow.rawsocket set from .Va jail_ Ns Ao Ar jname Ac Ns Va _socket_unixiproute_only .It Li allow.sysvipc set from .Va jail_ Ns Ao Ar jname Ac Ns Va _sysvipc_allow .El .\" ----------------------------------------------------- .It Va harvest_mask .Pq Vt int Set to a bit-mask representing the entropy sources you wish to harvest. Refer to .Xr random 4 for more information. .It Va entropy_dir .Pq Vt str Set to .Dq Li NO to disable caching entropy via .Xr cron 8 . Otherwise set to the directory in which the entropy files are stored. To be useful, there must be a system cron job that regularly writes and rotates files here. All files found will be used at boot time. The default is .Pa /var/db/entropy . .It Va entropy_file .Pq Vt str Set to .Dq Li NO to disable caching entropy through reboots. Otherwise set to the name of a file used to store cached entropy. This file should be located on a file system that is readable before all the volumes specified in .Xr fstab 5 are mounted. By default, .Pa /entropy is used, but if .Pa /var/db/entropy-file is found it will also be used. This will be of some use to .Xr bsdinstall 8 . .It Va entropy_boot_file .Pq Vt str Set to .Dq Li NO to disable very early caching entropy through reboots. Otherwise set to the filename used to read very early reboot cached entropy. This file should be located where .Xr loader 8 can read it. See also .Xr loader.conf 5 . The default location is .Pa /boot/entropy . .It Va entropy_save_sz .Pq Vt int Size of the entropy cache files saved by .Nm save-entropy periodically. .It Va entropy_save_num .Pq Vt int Number of entropy cache files to save by .Nm save-entropy periodically. .It Va ipsec_enable .Pq Vt bool Set to .Dq Li YES to run .Xr setkey 8 on .Va ipsec_file at boot time. .It Va ipsec_file .Pq Vt str Configuration file for .Xr setkey 8 . .It Va dmesg_enable .Pq Vt bool Set to .Dq Li YES to save .Xr dmesg 8 to .Pa /var/run/dmesg.boot on boot. .It Va rcshutdown_timeout .Pq Vt int If set, start a watchdog timer in the background which will terminate .Pa rc.shutdown if .Xr shutdown 8 has not completed within the specified time (in seconds). Notice that in addition to this soft timeout, .Xr init 8 also applies a hard timeout for the execution of .Pa rc.shutdown . This is configured via .Xr sysctl 8 variable .Va kern.init_shutdown_timeout and defaults to 120 seconds. Setting the value of .Va rcshutdown_timeout to more than 120 seconds will have no effect until the .Xr sysctl 8 variable .Va kern.init_shutdown_timeout is also increased. .It Va virecover_enable .Pq Vt bool Set to .Dq Li NO to prevent the system from trying to recover pre-maturely terminated .Xr vi 1 sessions. .It Va ugidfw_enable .Pq Vt bool Set to .Dq Li YES to load the .Xr mac_bsdextended 4 module upon system initialization and load a default ruleset file. .It Va bsdextended_script .Pq Vt str The default .Xr mac_bsdextended 4 ruleset file to load. The default value of this variable is .Pa /etc/rc.bsdextended . .It Va newsyslog_enable .Pq Vt bool If set to .Dq Li YES , run .Xr newsyslog 8 command at startup. .It Va newsyslog_flags .Pq Vt str If .Va newsyslog_enable is set to .Dq Li YES , these are the flags to pass to the .Xr newsyslog 8 program. The default is .Dq Li -CN , which causes log files flagged with a .Cm C to be created. .It Va mdconfig_md Ns Aq Ar X .Pq Vt str Arguments to .Xr mdconfig 8 for .Xr md 4 device .Ar X . At minimum a .Fl t Ar type must be specified and either a .Fl s Ar size for malloc or swap backed .Xr md 4 devices or a .Fl f Ar file for vnode backed .Xr md 4 devices. Note that .Va mdconfig_md Ns Aq Ar X variables are evaluated until one variable is unset or null. .It Va mdconfig_md Ns Ao Ar X Ac Ns Va _newfs .Pq Vt str Optional arguments passed to .Xr newfs 8 to initialize .Xr md 4 device .Ar X . .It Va mdconfig_md Ns Ao Ar X Ac Ns Va _owner .Pq Vt str An ownership specification passed to .Xr chown 8 after the specified .Xr md 4 device .Ar X has been mounted. Both the .Xr md 4 device and the mount point will be changed. .It Va mdconfig_md Ns Ao Ar X Ac Ns Va _perms .Pq Vt str A mode string passed to .Xr chmod 1 after the specified .Xr md 4 device .Ar X has been mounted. Both the .Xr md 4 device and the mount point will be changed. .It Va mdconfig_md Ns Ao Ar X Ac Ns Va _files .Pq Vt str Files to be copied to the mount point of the .Xr md 4 device .Ar X after it has been mounted. .It Va mdconfig_md Ns Ao Ar X Ac Ns Va _cmd .Pq Vt str Command to execute after the specified .Xr md 4 device .Ar X has been mounted. Note that the command is passed to .Ic eval and that both .Va _dev and .Va _mp variables can be used to reference respectively the .Xr md 4 device and the mount point. Assuming that the .Xr md 4 device is .Li md0 , one could set the following: .Bd -literal mdconfig_md0_cmd="tar xfzC /var/file.tgz \e${_mp}" .Ed .It Va autobridge_interfaces .Pq Vt str Set to the list of bridge interfaces that will have newly arriving interfaces checked against to be automatically added. If not set to .Dq Li NO then for each whitespace separated .Ar element in the value, a .Va autobridge_ Ns Aq Ar element variable is assumed to exist which has a whitespace separated list of interface names to match, these names can use wildcards. For example: .Bd -literal autobridge_interfaces="bridge0" autobridge_bridge0="tap* dc0 vlan[345]" .Ed .It Va mixer_enable .Pq Vt bool If set to .Dq Li YES , enable support for sound mixer. .It Va hcsecd_enable .Pq Vt bool If set to .Dq Li YES , enable Bluetooth security daemon. .It Va hcsecd_config .Pq Vt str Configuration file for .Xr hcsecd 8 . Default .Pa /etc/bluetooth/hcsecd.conf . .It Va sdpd_enable .Pq Vt bool If set to .Dq Li YES , enable Bluetooth Service Discovery Protocol daemon. .It Va sdpd_control .Pq Vt str Path to .Xr sdpd 8 control socket. Default .Pa /var/run/sdp . .It Va sdpd_groupname .Pq Vt str Sets .Xr sdpd 8 group to run as after it initializes. Default .Dq Li nobody . .It Va sdpd_username .Pq Vt str Sets .Xr sdpd 8 user to run as after it initializes. Default .Dq Li nobody . .It Va bthidd_enable .Pq Vt bool If set to .Dq Li YES , enable Bluetooth Human Interface Device daemon. .It Va bthidd_config .Pq Vt str Configuration file for .Xr bthidd 8 . Default .Pa /etc/bluetooth/bthidd.conf . .It Va bthidd_hids .Pq Vt str Path to a file, where .Xr bthidd 8 will store information about known HID devices. Default .Pa /var/db/bthidd.hids . .It Va rfcomm_pppd_server_enable .Pq Vt bool If set to .Dq Li YES , enable Bluetooth RFCOMM PPP wrapper daemon. .It Va rfcomm_pppd_server_profile .Pq Vt str The name of the profile to use from .Pa /etc/ppp/ppp.conf . Multiple profiles can be specified here. Also used to specify per-profile overrides. When the profile name contains any of the characters .Dq Li .-/+ they are translated to .Dq Li _ for the proposes of the override variable names. .It Va rfcomm_pppd_server_ Ns Ao Ar profile Ac Ns _bdaddr .Pq Vt str Overrides local address to listen on. By default .Xr rfcomm_pppd 8 will listen on .Dq Li ANY address. The address can be specified as BD_ADDR or name. .It Va rfcomm_pppd_server_ Ns Ao Ar profile Ac Ns _channel .Pq Vt str Overrides local RFCOMM channel to listen on. By default .Xr rfcomm_pppd 8 will listen on RFCOMM channel 1. Must set properly if multiple profiles used in the same time. .It Va rfcomm_pppd_server_ Ns Ao Ar profile Ac Ns _register_sp .Pq Vt bool Tells .Xr rfcomm_pppd 8 if it should register Serial Port service on the specified RFCOMM channel. Default .Dq Li NO . .It Va rfcomm_pppd_server_ Ns Ao Ar profile Ac Ns _register_dun .Pq Vt bool Tells .Xr rfcomm_pppd 8 if it should register Dial-Up Networking service on the specified RFCOMM channel. Default .Dq Li NO . .It Va ubthidhci_enable .Pq Vt bool If set to .Dq Li YES , change the USB Bluetooth controller from HID mode to HCI mode. You also need to specify the location of USB Bluetooth controller with the .Va ubthidhci_busnum and .Va ubthidhci_addr variables. .It Va ubthidhci_busnum Bus number where the USB Bluetooth controller is located. Check the output of .Xr usbconfig 8 on your system to find this information. .It Va ubthidhci_addr Bus address of the USB Bluetooth controller. Check the output of .Xr usbconfig 8 on your system to find this information. .It Va netwait_enable .Pq Vt bool If set to .Dq Li YES , delays the start of network-reliant services until .Va netwait_if is up and ICMP packets to a destination defined in .Va netwait_ip are flowing. Link state is examined first, followed by .Dq Li pinging an IP address to verify network usability. If no destination can be reached or timeouts are exceeded, network services are started anyway with no guarantee that the network is usable. Use of this variable requires both .Va netwait_ip and .Va netwait_if to be set. .It Va netwait_ip .Pq Vt str Empty by default. This variable contains a space-delimited list of IP addresses to .Xr ping 8 . DNS hostnames should not be used as resolution is not guaranteed to be functional at this point. If multiple IP addresses are specified, each will be tried until one is successful or the list is exhausted. .It Va netwait_timeout .Pq Vt int Indicates the total number of seconds to perform a .Dq Li ping against each IP address in .Va netwait_ip , at a rate of one ping per second. If any of the pings are successful, full network connectivity is considered reliable. The default is 60. .It Va netwait_if .Pq Vt str Empty by default. Defines the name of the network interface on which watch for link. .Xr ifconfig 8 is used to monitor the interface, looking for .Dq Li status: no carrier . Once gone, the link is considered up. This can be a .Xr vlan 4 interface if desired. .It Va netwait_if_timeout .Pq Vt int Defines the total number of seconds to wait for link to become usable, polled at a 1-second interval. The default is 30. .It Va rctl_enable .Pq Vt bool If set to .Dq Li YES , load .Xr rctl 8 rules from the defined ruleset. The kernel must be built with .Cd "options RACCT" and .Cd "options RCTL" . .It Va rctl_rules .Pq Vt str Set to .Pa /etc/rctl.conf by default. This variables contains the .Xr rctl.conf 5 ruleset to load for .Xr rctl 8 . .It Va iovctl_files .Pq Vt str A space-separated list of configuration files used by .Xr iovctl 8 . The default value is an empty string. .It Va autofs_enable .Pq Vt bool If set to .Dq Li YES , start the .Xr automount 8 utility and the .Xr automountd 8 and .Xr autounmountd 8 daemons at boot time. .It Va automount_flags .Pq Vt str If .Va autofs_enable is set to .Dq Li YES , these are the flags to pass to the .Xr automount 8 program. By default no flags are passed. .It Va automountd_flags .Pq Vt str If .Va autofs_enable is set to .Dq Li YES , these are the flags to pass to the .Xr automountd 8 daemon. By default no flags are passed. .It Va autounmountd_flags .Pq Vt str If .Va autofs_enable is set to .Dq Li YES , these are the flags to pass to the .Xr autounmountd 8 daemon. By default no flags are passed. .It Va ctld_enable .Pq Vt bool If set to .Dq Li YES , start the .Xr ctld 8 daemon at boot time. .It Va iscsid_enable .Pq Vt bool If set to .Dq Li YES , start the .Xr iscsid 8 daemon at boot time. .It Va iscsictl_enable .Pq Vt bool If set to .Dq Li YES , start the .Xr iscsictl 8 utility at boot time. .It Va iscsictl_flags .Pq Vt str If .Va iscsictl_enable is set to .Dq Li YES , these are the flags to pass to the .Xr iscsictl 8 program. The default is .Dq Li -Aa , which configures sessions based on the .Pa /etc/iscsi.conf configuration file. .It Va cfumass_enable .Pq Vt bool If set to .Dq Li YES , create and export an USB LUN using .Xr cfumass 4 at boot time. .It Va cfumass_dir .Pq Vt str The directory where the files exported by USB LUN are located. The default directory is .Pa /var/cfumass . .It Va service_delete_empty .Pq Vt bool If set to .Dq Li YES , .Ql Li service delete removes empty .Dq Li rc.conf.d files. .It Va zfs_bootonce_activate .Pq Vt bool If set to .Dq Li YES , and a boot environment marked bootonce is successfully booted, it will be made permanently active. .El .Sh FILES .Bl -tag -width ".Pa /etc/defaults/rc.conf" -compact .It Pa /etc/defaults/rc.conf .It Pa /etc/defaults/vendor.conf .It Pa /etc/rc.conf .It Pa /etc/rc.conf.local .El .Sh SEE ALSO .Xr chmod 1 , .Xr gdb 1 , .Xr info 1 , .Xr kbdcontrol 1 , -.Xr makewhatis 1 , .Xr sh 1 , .Xr vi 1 , .Xr vidcontrol 1 , .Xr bridge 4 , .Xr dummynet 4 , .Xr ip 4 , .Xr ipf 4 , .Xr ipfw 4 , .Xr ipnat 4 , .Xr kld 4 , .Xr pf 4 , .Xr pflog 4 , .Xr pfsync 4 , .Xr tcp 4 , .Xr udp 4 , .Xr exports 5 , .Xr fstab 5 , .Xr ipf 5 , .Xr ipnat 5 , .Xr jail.conf 5 , .Xr loader.conf 5 , .Xr motd 5 , .Xr newsyslog.conf 5 , .Xr pf.conf 5 , .Xr firewall 7 , .Xr growfs 7 , .Xr security 7 , .Xr tuning 7 , .Xr accton 8 , .Xr amd 8 , .Xr apm 8 , .Xr bsdinstall 8 , .Xr bthidd 8 , .Xr chkprintcap 8 , .Xr chown 8 , .Xr cron 8 , .Xr devfs 8 , .Xr dhclient 8 , .Xr ftpd 8 , .Xr geli 8 , .Xr hcsecd 8 , .Xr ifconfig 8 , .Xr inetd 8 , .Xr iovctl 8 , .Xr ipf 8 , .Xr ipfw 8 , .Xr ipnat 8 , .Xr jail 8 , .Xr kldxref 8 , .Xr loader 8 , .Xr lpd 8 , +.Xr makewhatis 8 , .Xr mdconfig 8 , .Xr mdmfs 8 , .Xr mixer 8 , .Xr mountd 8 , .Xr moused 8 , .Xr newfs 8 , .Xr newsyslog 8 , .Xr nfsd 8 , .Xr ntpd 8 , .Xr ntpdate 8 , .Xr pfctl 8 , .Xr pflogd 8 , .Xr ping 8 , .Xr powerd 8 , .Xr quotacheck 8 , .Xr quotaon 8 , .Xr rc 8 , .Xr rc.sendmail 8 , .Xr rcorder 8 , .Xr rfcomm_pppd 8 , .Xr route 8 , .Xr routed 8 , .Xr rpc.lockd 8 , .Xr rpc.statd 8 , .Xr rpcbind 8 , .Xr rwhod 8 , .Xr savecore 8 , .Xr sdpd 8 , .Xr service 8 , .Xr sshd 8 , .Xr swapon 8 , .Xr sysctl 8 , .Xr syslogd 8 , .Xr sysrc 8 , .Xr unbound 8 , .Xr usbconfig 8 , .Xr wlandebug 8 , .Xr yp 8 , .Xr ypbind 8 , .Xr ypserv 8 , .Xr ypset 8 .Sh HISTORY The .Nm file appeared in .Fx 2.2.2 . .Sh AUTHORS .An Jordan K. Hubbard .