diff --git a/release/tools/ec2.conf b/release/tools/ec2.conf index 522aaa400520..963c6ff4957b 100644 --- a/release/tools/ec2.conf +++ b/release/tools/ec2.conf @@ -1,135 +1,140 @@ #!/bin/sh # Package which should be installed onto all EC2 AMIs: # * ebsnvme-id, which is very minimal and provides important EBS-specific # functionality, export VM_EXTRA_PACKAGES="${VM_EXTRA_PACKAGES} ebsnvme-id" # Services which should be enabled by default in rc.conf(5). export VM_RC_LIST="dev_aws_disk ntpd" # Build with a 7.9 GB partition; the growfs rc.d script will expand # the partition to fill the root disk after the EC2 instance is launched. # Note that if this is set to G, we will end up with an GB disk # image since VMSIZE is the size of the filesystem partition, not the disk # which it resides within. export VMSIZE=8000m # No swap space; it doesn't make sense to provision any as part of the disk # image when we could be launching onto a system with anywhere between 0.5 # and 4096 GB of RAM. export NOSWAP=YES ec2_common() { # Delete the pkg package and the repo database; they will likely be # long out of date before the EC2 instance is launched. mount -t devfs devfs ${DESTDIR}/dev chroot ${DESTDIR} ${EMULATOR} env ASSUME_ALWAYS_YES=yes \ /usr/sbin/pkg delete -f -y pkg umount ${DESTDIR}/dev rm ${DESTDIR}/var/db/pkg/repo-*.sqlite # Turn off IPv6 Duplicate Address Detection; the EC2 networking # configuration makes it unnecessary. echo 'net.inet6.ip6.dad_count=0' >> ${DESTDIR}/etc/sysctl.conf # Booting quickly is more important than giving users a chance to # access the boot loader via the serial port. echo 'autoboot_delay="-1"' >> ${DESTDIR}/boot/loader.conf echo 'beastie_disable="YES"' >> ${DESTDIR}/boot/loader.conf # The EFI RNG on Graviton 2 is particularly slow if we ask for the # default 2048 bytes of entropy; ask for 64 bytes instead. echo 'entropy_efi_seed_size="64"' >> ${DESTDIR}/boot/loader.conf # Tell gptboot not to wait 3 seconds for a keypress which will # never arrive. printf -- "-n\n" > ${DESTDIR}/boot.config # The emulated keyboard attached to EC2 instances is inaccessible to # users, and there is no mouse attached at all; disable to keyboard # and the keyboard controller (to which the mouse would attach, if # one existed) in order to save time in device probing. echo 'hint.atkbd.0.disabled=1' >> ${DESTDIR}/boot/loader.conf echo 'hint.atkbdc.0.disabled=1' >> ${DESTDIR}/boot/loader.conf # EC2 has two consoles: An emulated serial port ("system log"), # which has been present since 2006; and a VGA console ("instance # screenshot") which was introduced in 2016. echo 'boot_multicons="YES"' >> ${DESTDIR}/boot/loader.conf # Some older EC2 hardware used a version of Xen with a bug in its # emulated serial port. It is not clear if EC2 still has any such # nodes, but apply the workaround just in case. echo 'hw.broken_txfifo="1"' >> ${DESTDIR}/boot/loader.conf + # Graviton 1 through Graviton 4 have a bug in their ACPI where they + # mark the PL061's pins as needing to be configured in PullUp mode + # (in fact the PL061 has no pullup/pulldown resistors). + echo 'debug.acpi.quirks="8"' >> ${DESTDIR}/boot/loader.conf + # Load the kernel module for the Amazon "Elastic Network Adapter" echo 'if_ena_load="YES"' >> ${DESTDIR}/boot/loader.conf # Use the "nda" driver for accessing NVMe disks rather than the # historical "nvd" driver. echo 'hw.nvme.use_nvd="0"' >> ${DESTDIR}/boot/loader.conf # Disable KbdInteractiveAuthentication according to EC2 requirements. sed -i '' -e \ 's/^#KbdInteractiveAuthentication yes/KbdInteractiveAuthentication no/' \ ${DESTDIR}/etc/ssh/sshd_config # Use FreeBSD Update mirrors hosted in AWS sed -i '' -e 's/update.FreeBSD.org/aws.update.FreeBSD.org/' \ ${DESTDIR}/etc/freebsd-update.conf # Use the NTP service provided by Amazon sed -i '' -e 's/^pool/#pool/' \ -e '1,/^#server/s/^#server.*/server 169.254.169.123 iburst/' \ ${DESTDIR}/etc/ntp.conf # Provide a map for accessing Elastic File System mounts cat > ${DESTDIR}/etc/autofs/special_efs <<'EOF' #!/bin/sh if [ $# -eq 0 ]; then # No way to know which EFS filesystems exist and are # accessible to this EC2 instance. exit 0 fi # Provide instructions on how to mount the requested filesystem. FS=$1 REGION=`fetch -qo- http://169.254.169.254/latest/meta-data/placement/availability-zone | sed -e 's/[a-z]$//'` echo "-nfsv4,minorversion=1,oneopenown ${FS}.efs.${REGION}.amazonaws.com:/" EOF chmod 755 ${DESTDIR}/etc/autofs/special_efs # The first time the AMI boots, run "first boot" scripts. touch ${DESTDIR}/firstboot return 0 } ec2_base_networking () { # EC2 instances use DHCP to get their network configuration. IPv6 # requires accept_rtadv. echo 'ifconfig_DEFAULT="SYNCDHCP accept_rtadv"' >> ${DESTDIR}/etc/rc.conf # The EC2 DHCP server can be trusted to know whether an IP address is # assigned to us; we don't need to ARP to check if anyone else is using # the address before we start using it. echo 'dhclient_arpwait="NO"' >> ${DESTDIR}/etc/rc.conf # Enable IPv6 on all interfaces, and spawn DHCPv6 via rtsold echo 'ipv6_activate_all_interfaces="YES"' >> ${DESTDIR}/etc/rc.conf echo 'rtsold_enable="YES"' >> ${DESTDIR}/etc/rc.conf echo 'rtsold_flags="-M /usr/local/libexec/rtsold-M -a"' >> ${DESTDIR}/etc/rc.conf # Provide a script which rtsold can use to launch DHCPv6 mkdir -p ${DESTDIR}/usr/local/libexec cat > ${DESTDIR}/usr/local/libexec/rtsold-M <<'EOF' #!/bin/sh /usr/local/sbin/dhclient -6 -nw -N -cf /dev/null $1 EOF chmod 755 ${DESTDIR}/usr/local/libexec/rtsold-M return 0 } diff --git a/sys/dev/acpica/acpivar.h b/sys/dev/acpica/acpivar.h index afb0a6909e1a..eb6022cde159 100644 --- a/sys/dev/acpica/acpivar.h +++ b/sys/dev/acpica/acpivar.h @@ -1,608 +1,611 @@ /*- * Copyright (c) 2000 Mitsuru IWASAKI * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _ACPIVAR_H_ #define _ACPIVAR_H_ #ifdef _KERNEL #include "acpi_if.h" #include "bus_if.h" #include #ifdef INTRNG #include #endif #include #include #include #include #include #include #include #include struct apm_clone_data; struct acpi_softc { device_t acpi_dev; struct cdev *acpi_dev_t; int acpi_enabled; int acpi_sstate; int acpi_sleep_disabled; struct sysctl_ctx_list acpi_sysctl_ctx; struct sysctl_oid *acpi_sysctl_tree; int acpi_power_button_sx; int acpi_sleep_button_sx; int acpi_lid_switch_sx; int acpi_standby_sx; int acpi_suspend_sx; int acpi_sleep_delay; int acpi_s4bios; int acpi_do_disable; int acpi_verbose; int acpi_handle_reboot; vm_offset_t acpi_wakeaddr; vm_paddr_t acpi_wakephys; int acpi_next_sstate; /* Next suspend Sx state. */ struct apm_clone_data *acpi_clone; /* Pseudo-dev for devd(8). */ STAILQ_HEAD(,apm_clone_data) apm_cdevs; /* All apm/apmctl/acpi cdevs. */ struct callout susp_force_to; /* Force suspend if no acks. */ }; struct acpi_device { /* ACPI ivars */ ACPI_HANDLE ad_handle; void *ad_private; int ad_flags; int ad_cls_class; ACPI_BUFFER dsd; /* Device Specific Data */ const ACPI_OBJECT *dsd_pkg; /* Resources */ struct resource_list ad_rl; }; #ifdef INTRNG struct intr_map_data_acpi { struct intr_map_data hdr; u_int irq; u_int pol; u_int trig; }; #endif /* Track device (/dev/{apm,apmctl} and /dev/acpi) notification status. */ struct apm_clone_data { STAILQ_ENTRY(apm_clone_data) entries; struct cdev *cdev; int flags; #define ACPI_EVF_NONE 0 /* /dev/apm semantics */ #define ACPI_EVF_DEVD 1 /* /dev/acpi is handled via devd(8) */ #define ACPI_EVF_WRITE 2 /* Device instance is opened writable. */ int notify_status; #define APM_EV_NONE 0 /* Device not yet aware of pending sleep. */ #define APM_EV_NOTIFIED 1 /* Device saw next sleep state. */ #define APM_EV_ACKED 2 /* Device agreed sleep can occur. */ struct acpi_softc *acpi_sc; struct selinfo sel_read; }; #define ACPI_PRW_MAX_POWERRES 8 struct acpi_prw_data { ACPI_HANDLE gpe_handle; int gpe_bit; int lowest_wake; ACPI_OBJECT power_res[ACPI_PRW_MAX_POWERRES]; int power_res_count; }; /* Flags for each device defined in the AML namespace. */ #define ACPI_FLAG_WAKE_ENABLED 0x1 /* Macros for extracting parts of a PCI address from an _ADR value. */ #define ACPI_ADR_PCI_SLOT(adr) (((adr) & 0xffff0000) >> 16) #define ACPI_ADR_PCI_FUNC(adr) ((adr) & 0xffff) /* * Entry points to ACPI from above are global functions defined in this * file, sysctls, and I/O on the control device. Entry points from below * are interrupts (the SCI), notifies, task queue threads, and the thermal * zone polling thread. * * ACPI tables and global shared data are protected by a global lock * (acpi_mutex). * * Each ACPI device can have its own driver-specific mutex for protecting * shared access to local data. The ACPI_LOCK macros handle mutexes. * * Drivers that need to serialize access to functions (e.g., to route * interrupts, get/set control paths, etc.) should use the sx lock macros * (ACPI_SERIAL). * * ACPI-CA handles its own locking and should not be called with locks held. * * The most complicated path is: * GPE -> EC runs _Qxx -> _Qxx reads EC space -> GPE */ extern struct mtx acpi_mutex; #define ACPI_LOCK(sys) mtx_lock(&sys##_mutex) #define ACPI_UNLOCK(sys) mtx_unlock(&sys##_mutex) #define ACPI_LOCK_ASSERT(sys) mtx_assert(&sys##_mutex, MA_OWNED); #define ACPI_LOCK_DECL(sys, name) \ static struct mtx sys##_mutex; \ MTX_SYSINIT(sys##_mutex, &sys##_mutex, name, MTX_DEF) #define ACPI_SERIAL_BEGIN(sys) sx_xlock(&sys##_sxlock) #define ACPI_SERIAL_END(sys) sx_xunlock(&sys##_sxlock) #define ACPI_SERIAL_ASSERT(sys) sx_assert(&sys##_sxlock, SX_XLOCKED); #define ACPI_SERIAL_DECL(sys, name) \ static struct sx sys##_sxlock; \ SX_SYSINIT(sys##_sxlock, &sys##_sxlock, name) /* * ACPI CA does not define layers for non-ACPI CA drivers. * We define some here within the range provided. */ #define ACPI_AC_ADAPTER 0x00010000 #define ACPI_BATTERY 0x00020000 #define ACPI_BUS 0x00040000 #define ACPI_BUTTON 0x00080000 #define ACPI_EC 0x00100000 #define ACPI_FAN 0x00200000 #define ACPI_POWERRES 0x00400000 #define ACPI_PROCESSOR 0x00800000 #define ACPI_THERMAL 0x01000000 #define ACPI_TIMER 0x02000000 #define ACPI_OEM 0x04000000 /* * Constants for different interrupt models used with acpi_SetIntrModel(). */ #define ACPI_INTR_PIC 0 #define ACPI_INTR_APIC 1 #define ACPI_INTR_SAPIC 2 /* * Various features and capabilities for the acpi_get_features() method. * In particular, these are used for the ACPI 3.0 _PDC and _OSC methods. * See the Intel document titled "Intel Processor Vendor-Specific ACPI", * number 302223-007. */ #define ACPI_CAP_PERF_MSRS (1 << 0) /* Intel SpeedStep PERF_CTL MSRs */ #define ACPI_CAP_C1_IO_HALT (1 << 1) /* Intel C1 "IO then halt" sequence */ #define ACPI_CAP_THR_MSRS (1 << 2) /* Intel OnDemand throttling MSRs */ #define ACPI_CAP_SMP_SAME (1 << 3) /* MP C1, Px, and Tx (all the same) */ #define ACPI_CAP_SMP_SAME_C3 (1 << 4) /* MP C2 and C3 (all the same) */ #define ACPI_CAP_SMP_DIFF_PX (1 << 5) /* MP Px (different, using _PSD) */ #define ACPI_CAP_SMP_DIFF_CX (1 << 6) /* MP Cx (different, using _CSD) */ #define ACPI_CAP_SMP_DIFF_TX (1 << 7) /* MP Tx (different, using _TSD) */ #define ACPI_CAP_SMP_C1_NATIVE (1 << 8) /* MP C1 support other than halt */ #define ACPI_CAP_SMP_C3_NATIVE (1 << 9) /* MP C2 and C3 support */ #define ACPI_CAP_PX_HW_COORD (1 << 11) /* Intel P-state HW coordination */ #define ACPI_CAP_INTR_CPPC (1 << 12) /* Native Interrupt Handling for Collaborative Processor Performance Control notifications */ #define ACPI_CAP_HW_DUTY_C (1 << 13) /* Hardware Duty Cycling */ /* * Quirk flags. * * ACPI_Q_BROKEN: Disables all ACPI support. * ACPI_Q_TIMER: Disables support for the ACPI timer. * ACPI_Q_MADT_IRQ0: Specifies that ISA IRQ 0 is wired up to pin 0 of the * first APIC and that the MADT should force that by ignoring the PC-AT * compatible flag and ignoring overrides that redirect IRQ 0 to pin 2. + * ACPI_Q_AEI_NOPULL: Specifies that _AEI objects incorrectly designate pins + * as "PullUp" and they should be treated as "NoPull" instead. */ extern int acpi_quirks; #define ACPI_Q_OK 0 #define ACPI_Q_BROKEN (1 << 0) #define ACPI_Q_TIMER (1 << 1) #define ACPI_Q_MADT_IRQ0 (1 << 2) +#define ACPI_Q_AEI_NOPULL (1 << 3) #if defined(__amd64__) || defined(__i386__) /* * Certain Intel BIOSes have buggy AML that specify an IRQ that is * edge-sensitive and active-lo. Normally, edge-sensitive IRQs should * be active-hi. If this value is non-zero, edge-sensitive ISA IRQs * are forced to be active-hi instead. At least some AMD systems use * active-lo edge-sensitive ISA IRQs, so this setting is only enabled * by default on systems with Intel CPUs. */ extern int acpi_override_isa_irq_polarity; #endif /* * Plug and play information for device matching. Matching table format * is compatible with ids parameter of ACPI_ID_PROBE bus method. * * XXX: While ACPI_ID_PROBE matches against _HID and all _CIDs, current * acpi_pnpinfo() exports only _HID and first _CID. That means second * and further _CIDs should be added to both acpi_pnpinfo() and * ACPICOMPAT_PNP_INFO if device matching against them is required. */ #define ACPICOMPAT_PNP_INFO(t, busname) \ MODULE_PNP_INFO("Z:_HID", busname, t##hid, t, nitems(t)-1); \ MODULE_PNP_INFO("Z:_CID", busname, t##cid, t, nitems(t)-1); #define ACPI_PNP_INFO(t) ACPICOMPAT_PNP_INFO(t, acpi) /* * Note that the low ivar values are reserved to provide * interface compatibility with ISA drivers which can also * attach to ACPI. */ #define ACPI_IVAR_HANDLE 0x100 #define ACPI_IVAR_UNUSED 0x101 /* Unused/reserved. */ #define ACPI_IVAR_PRIVATE 0x102 #define ACPI_IVAR_FLAGS 0x103 /* * Accessor functions for our ivars. Default value for BUS_READ_IVAR is * (type) 0. The accessor functions don't check return values. */ #define __ACPI_BUS_ACCESSOR(varp, var, ivarp, ivar, type) \ \ static __inline type varp ## _get_ ## var(device_t dev) \ { \ uintptr_t v = 0; \ BUS_READ_IVAR(device_get_parent(dev), dev, \ ivarp ## _IVAR_ ## ivar, &v); \ return ((type) v); \ } \ \ static __inline void varp ## _set_ ## var(device_t dev, type t) \ { \ uintptr_t v = (uintptr_t) t; \ BUS_WRITE_IVAR(device_get_parent(dev), dev, \ ivarp ## _IVAR_ ## ivar, v); \ } __ACPI_BUS_ACCESSOR(acpi, handle, ACPI, HANDLE, ACPI_HANDLE) __ACPI_BUS_ACCESSOR(acpi, private, ACPI, PRIVATE, void *) __ACPI_BUS_ACCESSOR(acpi, flags, ACPI, FLAGS, int) void acpi_fake_objhandler(ACPI_HANDLE h, void *data); static __inline device_t acpi_get_device(ACPI_HANDLE handle) { void *dev = NULL; AcpiGetData(handle, acpi_fake_objhandler, &dev); return ((device_t)dev); } static __inline ACPI_OBJECT_TYPE acpi_get_type(device_t dev) { ACPI_HANDLE h; ACPI_OBJECT_TYPE t; if ((h = acpi_get_handle(dev)) == NULL) return (ACPI_TYPE_NOT_FOUND); if (ACPI_FAILURE(AcpiGetType(h, &t))) return (ACPI_TYPE_NOT_FOUND); return (t); } /* Find the difference between two PM tick counts. */ static __inline uint32_t acpi_TimerDelta(uint32_t end, uint32_t start) { if (end < start && (AcpiGbl_FADT.Flags & ACPI_FADT_32BIT_TIMER) == 0) end |= 0x01000000; return (end - start); } #ifdef ACPI_DEBUGGER void acpi_EnterDebugger(void); #endif #ifdef ACPI_DEBUG #include #define STEP(x) do {printf x, printf("\n"); cngetc();} while (0) #else #define STEP(x) #endif #define ACPI_VPRINT(dev, acpi_sc, x...) do { \ if (acpi_get_verbose(acpi_sc)) \ device_printf(dev, x); \ } while (0) /* Values for the first status word returned by _OSC. */ #define ACPI_OSC_FAILURE (1 << 1) #define ACPI_OSC_BAD_UUID (1 << 2) #define ACPI_OSC_BAD_REVISION (1 << 3) #define ACPI_OSC_CAPS_MASKED (1 << 4) #define ACPI_DEVINFO_PRESENT(x, flags) \ (((x) & (flags)) == (flags)) #define ACPI_DEVICE_PRESENT(x) \ ACPI_DEVINFO_PRESENT(x, ACPI_STA_DEVICE_PRESENT | \ ACPI_STA_DEVICE_FUNCTIONING) #define ACPI_BATTERY_PRESENT(x) \ ACPI_DEVINFO_PRESENT(x, ACPI_STA_DEVICE_PRESENT | \ ACPI_STA_DEVICE_FUNCTIONING | ACPI_STA_BATTERY_PRESENT) /* Callback function type for walking subtables within a table. */ typedef void acpi_subtable_handler(ACPI_SUBTABLE_HEADER *, void *); BOOLEAN acpi_DeviceIsPresent(device_t dev); BOOLEAN acpi_BatteryIsPresent(device_t dev); ACPI_STATUS acpi_GetHandleInScope(ACPI_HANDLE parent, char *path, ACPI_HANDLE *result); ACPI_STATUS acpi_GetProperty(device_t dev, ACPI_STRING propname, const ACPI_OBJECT **value); ACPI_BUFFER *acpi_AllocBuffer(int size); ACPI_STATUS acpi_ConvertBufferToInteger(ACPI_BUFFER *bufp, UINT32 *number); ACPI_STATUS acpi_GetInteger(ACPI_HANDLE handle, char *path, UINT32 *number); ACPI_STATUS acpi_SetInteger(ACPI_HANDLE handle, char *path, UINT32 number); ACPI_STATUS acpi_ForeachPackageObject(ACPI_OBJECT *obj, void (*func)(ACPI_OBJECT *comp, void *arg), void *arg); ACPI_STATUS acpi_FindIndexedResource(ACPI_BUFFER *buf, int index, ACPI_RESOURCE **resp); ACPI_STATUS acpi_AppendBufferResource(ACPI_BUFFER *buf, ACPI_RESOURCE *res); UINT64 acpi_DSMQuery(ACPI_HANDLE h, const uint8_t *uuid, int revision); ACPI_STATUS acpi_EvaluateDSM(ACPI_HANDLE handle, const uint8_t *uuid, int revision, UINT64 function, ACPI_OBJECT *package, ACPI_BUFFER *out_buf); ACPI_STATUS acpi_EvaluateDSMTyped(ACPI_HANDLE handle, const uint8_t *uuid, int revision, UINT64 function, ACPI_OBJECT *package, ACPI_BUFFER *out_buf, ACPI_OBJECT_TYPE type); ACPI_STATUS acpi_EvaluateOSC(ACPI_HANDLE handle, uint8_t *uuid, int revision, int count, uint32_t *caps_in, uint32_t *caps_out, bool query); ACPI_STATUS acpi_OverrideInterruptLevel(UINT32 InterruptNumber); ACPI_STATUS acpi_SetIntrModel(int model); int acpi_ReqSleepState(struct acpi_softc *sc, int state); int acpi_AckSleepState(struct apm_clone_data *clone, int error); ACPI_STATUS acpi_SetSleepState(struct acpi_softc *sc, int state); int acpi_wake_set_enable(device_t dev, int enable); int acpi_parse_prw(ACPI_HANDLE h, struct acpi_prw_data *prw); ACPI_STATUS acpi_Startup(void); void acpi_UserNotify(const char *subsystem, ACPI_HANDLE h, uint8_t notify); int acpi_bus_alloc_gas(device_t dev, int *type, int *rid, ACPI_GENERIC_ADDRESS *gas, struct resource **res, u_int flags); void acpi_walk_subtables(void *first, void *end, acpi_subtable_handler *handler, void *arg); BOOLEAN acpi_has_hid(ACPI_HANDLE handle); int acpi_MatchHid(ACPI_HANDLE h, const char *hid); #define ACPI_MATCHHID_NOMATCH 0 #define ACPI_MATCHHID_HID 1 #define ACPI_MATCHHID_CID 2 static __inline bool acpi_HasProperty(device_t dev, ACPI_STRING propname) { return ACPI_SUCCESS(acpi_GetProperty(dev, propname, NULL)); } struct acpi_parse_resource_set { void (*set_init)(device_t dev, void *arg, void **context); void (*set_done)(device_t dev, void *context); void (*set_ioport)(device_t dev, void *context, uint64_t base, uint64_t length); void (*set_iorange)(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align); void (*set_memory)(device_t dev, void *context, uint64_t base, uint64_t length); void (*set_memoryrange)(device_t dev, void *context, uint64_t low, uint64_t high, uint64_t length, uint64_t align); void (*set_irq)(device_t dev, void *context, uint8_t *irq, int count, int trig, int pol); void (*set_ext_irq)(device_t dev, void *context, uint32_t *irq, int count, int trig, int pol); void (*set_drq)(device_t dev, void *context, uint8_t *drq, int count); void (*set_start_dependent)(device_t dev, void *context, int preference); void (*set_end_dependent)(device_t dev, void *context); }; extern struct acpi_parse_resource_set acpi_res_parse_set; int acpi_identify(void); void acpi_config_intr(device_t dev, ACPI_RESOURCE *res); #ifdef INTRNG int acpi_map_intr(device_t dev, u_int irq, ACPI_HANDLE handle); #endif ACPI_STATUS acpi_lookup_irq_resource(device_t dev, int rid, struct resource *res, ACPI_RESOURCE *acpi_res); ACPI_STATUS acpi_parse_resources(device_t dev, ACPI_HANDLE handle, struct acpi_parse_resource_set *set, void *arg); struct resource *acpi_alloc_sysres(device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags); /* ACPI event handling */ UINT32 acpi_event_power_button_sleep(void *context); UINT32 acpi_event_power_button_wake(void *context); UINT32 acpi_event_sleep_button_sleep(void *context); UINT32 acpi_event_sleep_button_wake(void *context); #define ACPI_EVENT_PRI_FIRST 0 #define ACPI_EVENT_PRI_DEFAULT 10000 #define ACPI_EVENT_PRI_LAST 20000 typedef void (*acpi_event_handler_t)(void *, int); EVENTHANDLER_DECLARE(acpi_sleep_event, acpi_event_handler_t); EVENTHANDLER_DECLARE(acpi_wakeup_event, acpi_event_handler_t); EVENTHANDLER_DECLARE(acpi_acad_event, acpi_event_handler_t); EVENTHANDLER_DECLARE(acpi_video_event, acpi_event_handler_t); /* Device power control. */ ACPI_STATUS acpi_pwr_wake_enable(ACPI_HANDLE consumer, int enable); ACPI_STATUS acpi_pwr_switch_consumer(ACPI_HANDLE consumer, int state); acpi_pwr_for_sleep_t acpi_device_pwr_for_sleep; int acpi_set_powerstate(device_t child, int state); /* APM emulation */ void acpi_apm_init(struct acpi_softc *); /* Misc. */ static __inline struct acpi_softc * acpi_device_get_parent_softc(device_t child) { device_t parent; parent = device_get_parent(child); if (parent == NULL) return (NULL); return (device_get_softc(parent)); } static __inline int acpi_get_verbose(struct acpi_softc *sc) { if (sc) return (sc->acpi_verbose); return (0); } char *acpi_name(ACPI_HANDLE handle); int acpi_avoid(ACPI_HANDLE handle); int acpi_disabled(char *subsys); int acpi_get_acpi_device_path(device_t bus, device_t child, const char *locator, struct sbuf *sb); int acpi_machdep_init(device_t dev); void acpi_install_wakeup_handler(struct acpi_softc *sc); int acpi_sleep_machdep(struct acpi_softc *sc, int state); int acpi_wakeup_machdep(struct acpi_softc *sc, int state, int sleep_result, int intr_enabled); int acpi_table_quirks(int *quirks); int acpi_machdep_quirks(int *quirks); int acpi_pnpinfo(ACPI_HANDLE handle, struct sbuf *sb); uint32_t hpet_get_uid(device_t dev); /* Battery Abstraction. */ struct acpi_battinfo; int acpi_battery_register(device_t dev); int acpi_battery_remove(device_t dev); int acpi_battery_get_units(void); int acpi_battery_get_info_expire(void); int acpi_battery_bst_valid(struct acpi_bst *bst); int acpi_battery_bix_valid(struct acpi_bix *bix); int acpi_battery_get_battinfo(device_t dev, struct acpi_battinfo *info); /* Embedded controller. */ void acpi_ec_ecdt_probe(device_t); /* AC adapter interface. */ int acpi_acad_get_acline(int *); /* Package manipulation convenience functions. */ #define ACPI_PKG_VALID(pkg, size) \ ((pkg) != NULL && (pkg)->Type == ACPI_TYPE_PACKAGE && \ (pkg)->Package.Count >= (size)) #define ACPI_PKG_VALID_EQ(pkg, size) \ ((pkg) != NULL && (pkg)->Type == ACPI_TYPE_PACKAGE && \ (pkg)->Package.Count == (size)) int acpi_PkgInt(ACPI_OBJECT *res, int idx, UINT64 *dst); int acpi_PkgInt32(ACPI_OBJECT *res, int idx, uint32_t *dst); int acpi_PkgInt16(ACPI_OBJECT *res, int idx, uint16_t *dst); int acpi_PkgStr(ACPI_OBJECT *res, int idx, void *dst, size_t size); int acpi_PkgGas(device_t dev, ACPI_OBJECT *res, int idx, int *type, int *rid, struct resource **dst, u_int flags); int acpi_PkgFFH_IntelCpu(ACPI_OBJECT *res, int idx, int *vendor, int *class, uint64_t *address, int *accsize); ACPI_HANDLE acpi_GetReference(ACPI_HANDLE scope, ACPI_OBJECT *obj); /* * Base level for BUS_ADD_CHILD. Special devices are added at orders less * than this, and normal devices at or above this level. This keeps the * probe order sorted so that things like sysresource are available before * their children need them. */ #define ACPI_DEV_BASE_ORDER 100 /* Default maximum number of tasks to enqueue. */ #ifndef ACPI_MAX_TASKS #define ACPI_MAX_TASKS MAX(32, MAXCPU * 4) #endif /* Default number of task queue threads to start. */ #ifndef ACPI_MAX_THREADS #define ACPI_MAX_THREADS 3 #endif /* Use the device logging level for ktr(4). */ #define KTR_ACPI KTR_DEV SYSCTL_DECL(_debug_acpi); /* * Parse and use proximity information in SRAT and SLIT. */ int acpi_pxm_init(int ncpus, vm_paddr_t maxphys); void acpi_pxm_parse_tables(void); void acpi_pxm_set_mem_locality(void); void acpi_pxm_set_cpu_locality(void); int acpi_pxm_get_cpu_locality(int apic_id); /* * Map a PXM to a VM domain. * * Returns the VM domain ID if found, or -1 if not found / invalid. */ int acpi_map_pxm_to_vm_domainid(int pxm); bus_get_cpus_t acpi_get_cpus; bus_get_domain_t acpi_get_domain; #ifdef __aarch64__ /* * ARM specific ACPI interfaces, relating to IORT table. */ int acpi_iort_map_pci_msi(u_int seg, u_int rid, u_int *xref, u_int *devid); int acpi_iort_map_pci_smmuv3(u_int seg, u_int rid, u_int *xref, u_int *devid); int acpi_iort_its_lookup(u_int its_id, u_int *xref, int *pxm); int acpi_iort_map_named_msi(const char *devname, u_int rid, u_int *xref, u_int *devid); int acpi_iort_map_named_smmuv3(const char *devname, u_int rid, u_int *xref, u_int *devid); #endif #endif /* _KERNEL */ #endif /* !_ACPIVAR_H_ */