diff --git a/share/man/man7/networking.7 b/share/man/man7/networking.7
index 869812c05a9b..03e80793e98d 100644
--- a/share/man/man7/networking.7
+++ b/share/man/man7/networking.7
@@ -1,101 +1,94 @@
 .\"-
 .\" SPDX-License-Identifier: BSD-2-Clause
 .\"
-.\" Copyright (c) 2024 Alexander Ziaee <concussious@runbox.com>
+.\" Copyright (c) 2024 Alexander Ziaee. Ohio.
 .\"
 .Dd April 17, 2024
 .Dt "NETWORKING" 7
 .Os
 .Sh NAME
 .Nm networking ,
 .Nm wifi
 .Nd quickstart guide to connecting to a network
 .Sh DESCRIPTION
 In the following examples, it is assumed that we are connecting to Ethernet
 with the first interface found by the
 .Xr em 4
 driver, and Wi-Fi with the first interface found by the
 .Xr iwn 4
 driver, though your hardware will vary.
 .Sh EXAMPLES
 .Bl -tag -width 0n
 .It Sy Connecting to an Ethernet network with DHCP:
 .Bd -literal -offset 2n
 .Ic # dhclient em0
 .Ed
 .It Sy Connecting to a cellular network with USB tethering:
 .Pp
 Load the USB tethering driver,
 .Xr urndis 4 :
 .Bd -literal -offset 2n
 .Ic # kldload urndis
 .Ed
 .Pp
 Ask for a DHCP lease on the USB tethering interface:
 .Bd -literal -offset 2n
 .Ic # dhclient ue0
 .Ed
 .It Sy Connecting to a Wi-Fi network:
 .Pp
 Identify your Wi-Fi hardware:
 .Bd -literal -offset 2n
 .Ic % sysctl net.wlan.devices
 .Ed
 .Pp
 Configure your Wi-Fi hardware as wlan0 interface:
 .Ed
 .Bd -literal -offset 2n
 .Ic # sysrc wlans_iwn0="wlan0"
 .Ed
 .Pp
 Set that interface to negotiate a DHCP lease with
 .Xr wpa_supplicant 8 :
 .Bd -literal -offset 2n
 .Ic # sysrc ifconfig_wlan0="WPA SYNCDHCP"
 .Ed
 .Pp
 Enter the details of the Wi-Fi network:
 .Bd -literal -offset 2n
 .Ic # wpa_passphrase \(dqmyssid\(dq \(dqmypassphrase\(dq >> wpa_supplicant.conf
 .Ed
 .Pp
 Restart the network interface daemon:
 .Bd -literal -offset 2n
 .Ic # service netif restart
 .Ed
 .Pp
 .It Sy Scanning for Wi-Fi networks:
 .Bd -literal -offset 2n
 .Ic % ifconfig wlan0 scan
 .Ed
 .It Sy Airplane mode:
 .Bd -literal -offset 2n
 .Ic # service netif stop
 .Ed
 .El
 .Sh SEE ALSO
 .Xr bsdconfig 8 ,
 .Xr dhclient 8 ,
 .Xr ifconfig 8 ,
 .Xr wpa_passphrase 8
 .Pp
 The Advanced Networking chapter of the
 .Fx
 Handbook.
 .Sh CAVEATS
 Shell Special Characters in the
 .Ar SSID
 or
 .Ar passphrase
 will need to be escaped for
 .Xr wpa_passphrase 8 ,
 commonly using
 .Ql \e ,
 see the manual page for your shell for more details.
-.Pp
-Currently
-.Ql Ic service netif restart
-does not restart routing.
-A common workaround is to issue
-.Ql Ic service netif restart && service routing restart
-instead.