diff --git a/usr.sbin/i2c/i2c.c b/usr.sbin/i2c/i2c.c
index 12155f1a0663..e4a780ba828f 100644
--- a/usr.sbin/i2c/i2c.c
+++ b/usr.sbin/i2c/i2c.c
@@ -1,908 +1,908 @@
 /*-
  * SPDX-License-Identifier: BSD-2-Clause
  *
  * Copyright (C) 2008-2009 Semihalf, Michal Hajduk and Bartlomiej Sieka
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  */
 
 #include <sys/cdefs.h>
 #include <assert.h>
 #include <ctype.h>
 #include <err.h>
 #include <errno.h>
 #include <sysexits.h>
 #include <fcntl.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>
 #include <sys/endian.h>
 #include <sys/ioctl.h>
 
 #include <dev/iicbus/iic.h>
 
 #define	I2C_DEV			"/dev/iic0"
 #define	I2C_MODE_NOTSET		0
 #define	I2C_MODE_NONE		1
 #define	I2C_MODE_STOP_START	2
 #define	I2C_MODE_REPEATED_START	3
 #define	I2C_MODE_TRANSFER	4
 
 struct options {
 	const char	*width;
 	unsigned	count;
 	int		verbose;
 	int		binary;
 	const char	*skip;
 	int		mode;
 	char		dir;
 	uint32_t	addr;
 	uint32_t	off;
 	uint8_t		off_buf[2];
 	size_t		off_len;
 };
 
 #define N_FDCACHE 128
 static int fd_cache[N_FDCACHE];
 
 __dead2 static void
 usage(const char *msg)
 {
 
 	if (msg != NULL)
 		fprintf(stderr, "%s\n", msg);
 	fprintf(stderr, "usage: %s -a addr [-f device] [-d [r|w]] [-o offset] "
 	    "[-w [0|8|16|16LE|16BE]] [-c count] [-m [tr|ss|rs|no]] [-b] [-v]\n",
 	    getprogname());
 	fprintf(stderr, "       %s -s [-f device] [-n skip_addr] -v\n",
 	    getprogname());
 	fprintf(stderr, "       %s -r [-f device] -v\n", getprogname());
 	exit(EX_USAGE);
 }
 
 static int
 i2c_do_stop(int fd)
 {
 	int i;
 
 	i = ioctl(fd, I2CSTOP);
 	if (i < 0)
 		fprintf(stderr, "ioctl: error sending stop condition: %s\n",
 		    strerror(errno));
 	return (i);
 }
 
 static int
 i2c_do_start(int fd, struct iiccmd *cmd)
 {
 	int i;
 
 	i = ioctl(fd, I2CSTART, cmd);
 	if (i < 0)
 		fprintf(stderr, "ioctl: error sending start condition: %s\n",
 		    strerror(errno));
 	return (i);
 }
 
 static int
 i2c_do_repeatstart(int fd, struct iiccmd *cmd)
 {
 	int i;
 
 	i = ioctl(fd, I2CRPTSTART, cmd);
 	if (i < 0)
 		fprintf(stderr, "ioctl: error sending repeated start: %s\n",
 		    strerror(errno));
 	return (i);
 }
 
 static int
 i2c_do_write(int fd, struct iiccmd *cmd)
 {
 	int i;
 
 	i = ioctl(fd, I2CWRITE, cmd);
 	if (i < 0)
 		fprintf(stderr, "ioctl: error writing: %s\n",
 		    strerror(errno));
 	return (i);
 }
 
 static int
 i2c_do_read(int fd, struct iiccmd *cmd)
 {
 	int i;
 
 	i = ioctl(fd, I2CREAD, cmd);
 	if (i < 0)
 		fprintf(stderr, "ioctl: error reading: %s\n",
 		    strerror(errno));
 	return (i);
 }
 
 static int
 i2c_do_reset(int fd)
 {
 	struct iiccmd cmd;
 	int i;
 
 	memset(&cmd, 0, sizeof cmd);
 	i = ioctl(fd, I2CRSTCARD, &cmd);
 	if (i < 0)
 		fprintf(stderr, "ioctl: error resetting controller: %s\n",
 		    strerror(errno));
 	return (i);
 }
 
 static void
 parse_skip(const char *skip, char blacklist[128])
 {
 	const char *p;
 	unsigned x, y;
 
 	for (p = skip; *p != '\0';) {
 		if (*p == '0' && p[1] == 'x')
 			p += 2;
 		if (!isxdigit(*p))
 			usage("Bad -n argument, expected (first) hex-digit");
 		x = digittoint(*p++) << 4;
 		if (!isxdigit(*p))
 			usage("Bad -n argument, expected (second) hex-digit");
 		x |= digittoint(*p++);
 		if (x == 0 || x > 0x7f)
 			usage("Bad -n argument, (01..7f)");
 		if (*p == ':' || *p == ',' || *p == '\0') {
 			blacklist[x] = 1;
 			if (*p != '\0')
 				p++;
 			continue;
 		}
 		if (*p == '-') {
 			p++;
 		} else if (*p == '.' && p[1] == '.') {
 			p += 2;
 		} else {
 			usage("Bad -n argument, ([:|,|..|-])");
 		}
 		if (*p == '0' && p[1] == 'x')
 			p += 2;
 		if (!isxdigit(*p))
 			usage("Bad -n argument, expected (first) hex-digit");
 		y = digittoint(*p++) << 4;
 		if (!isxdigit(*p))
 			usage("Bad -n argument, expected (second) hex-digit");
 		y |= digittoint(*p++);
 		if (y == 0 || y > 0x7f)
 			usage("Bad -n argument, (01..7f)");
 		if (y < x)
 			usage("Bad -n argument, (end < start)");
 		for (;x <= y; x++)
 			blacklist[x] = 1;
 		if (*p == ':' || *p == ',')
 			p++;
 	}
 }
 
 static int
 scan_bus(const char *dev, int fd, const char *skip, int verbose)
 {
 	struct iiccmd cmd;
 	struct iic_msg rdmsg;
 	struct iic_rdwr_data rdwrdata;
 	int error;
 	unsigned u;
 	int num_found = 0, use_read_xfer;
 	uint8_t rdbyte;
 	char blacklist[128];
 	const char *sep = "";
 
 	memset(blacklist, 0, sizeof blacklist);
 
 	if (skip != NULL)
 		parse_skip(skip, blacklist);
 
 	for (use_read_xfer = 0; use_read_xfer < 2; use_read_xfer++) {
 		for (u = 1; u < 127; u++) {
 			if (blacklist[u])
 				continue;
 
 			cmd.slave = u << 1;
 			cmd.last = 1;
 			cmd.count = 0;
 			if (i2c_do_reset(fd))
 				return (EX_NOINPUT);
 
 			if (use_read_xfer) {
 				rdmsg.buf = &rdbyte;
 				rdmsg.len = 1;
 				rdmsg.flags = IIC_M_RD;
 				rdmsg.slave = u << 1;
 				rdwrdata.msgs = &rdmsg;
 				rdwrdata.nmsgs = 1;
 				error = ioctl(fd, I2CRDWR, &rdwrdata);
 			} else {
 				error = ioctl(fd, I2CSTART, &cmd);
 				if (errno == ENODEV || errno == EOPNOTSUPP)
 					break; /* Try reads instead */
 				(void)ioctl(fd, I2CSTOP);
 			}
 			if (error == 0) {
 				if (!num_found++ && verbose) {
 					fprintf(stderr,
 					    "Scanning I2C devices on %s:\n",
 					    dev);
 				}
 				printf("%s%02x", sep, u);
 				sep = " ";
 			}
 		}
 		if (num_found > 0)
 			break;
 		if (verbose && !use_read_xfer)
 			fprintf(stderr,
 			    "Hardware may not support START/STOP scanning; "
 			    "trying less-reliable read method.\n");
 	}
 	if (num_found == 0 && verbose)
 		printf("<Nothing Found>");
 
 	printf("\n");
 
 	return (i2c_do_reset(fd));
 }
 
 static int
 reset_bus(const char *dev, int fd, int verbose)
 {
 
 	if (verbose)
 		fprintf(stderr, "Resetting I2C controller on %s\n", dev);
 	return (i2c_do_reset(fd));
 }
 
 static const char *
 encode_offset(const char *width, unsigned offset, uint8_t *dst, size_t *len)
 {
 
 	if (!strcmp(width, "0")) {
 		*len = 0;
 		return (NULL);
 	}
 	if (!strcmp(width, "8")) {
 		if (offset > 0xff)
 			return ("Invalid 8-bit offset\n");
 		*dst = offset;
 		*len = 1;
 		return (NULL);
 	}
 	if (offset > 0xffff)
 		return ("Invalid 16-bit offset\n");
 	if (!strcmp(width, "16LE") || !strcmp(width, "16")) {
 		le16enc(dst, offset);
 		*len = 2;
 		return (NULL);
 	}
 	if (!strcmp(width, "16BE")) {
 		be16enc(dst, offset);
 		*len = 2;
 		return (NULL);
 	}
 	return ("Invalid offset width, must be: 0|8|16|16LE|16BE\n");
 }
 
 static int
 write_offset(int fd, struct options i2c_opt, struct iiccmd *cmd)
 {
 
 	if (i2c_opt.off_len > 0) {
 		cmd->count = i2c_opt.off_len;
 		cmd->buf = (void*)i2c_opt.off_buf;
 		return (i2c_do_write(fd, cmd));
 	}
 	return (0);
 }
 
 static int
 i2c_write(int fd, struct options i2c_opt, uint8_t *i2c_buf)
 {
 	struct iiccmd cmd;
 	char buf[i2c_opt.off_len + i2c_opt.count];
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.slave = i2c_opt.addr;
 
 	if (i2c_do_start(fd, &cmd))
 		return (i2c_do_stop(fd) | 1);
 
 	switch(i2c_opt.mode) {
 	case I2C_MODE_STOP_START:
 		if (write_offset(fd, i2c_opt, &cmd))
 			return (i2c_do_stop(fd) | 1);
 
 		if (i2c_do_stop(fd))
 			return (1);
 
 		if (i2c_do_start(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 
 		/*
 		 * Write the data
 		 */
 		cmd.count = i2c_opt.count;
 		cmd.buf = (void*)i2c_buf;
 		cmd.last = 0;
 		if (i2c_do_write(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 		break;
 
 	case I2C_MODE_REPEATED_START:
 		if (write_offset(fd, i2c_opt, &cmd))
 			return (i2c_do_stop(fd) | 1);
 
 		if (i2c_do_repeatstart(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 
 		/*
 		 * Write the data
 		 */
 		cmd.count = i2c_opt.count;
 		cmd.buf = (void*)i2c_buf;
 		cmd.last = 0;
 		if (i2c_do_write(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 		break;
 
 	case I2C_MODE_NONE: /* fall through */
 	default:
 		memcpy(buf, i2c_opt.off_buf, i2c_opt.off_len);
 		memcpy(buf + i2c_opt.off_len, i2c_buf, i2c_opt.count);
 		/*
 		 * Write offset and data
 		 */
 		cmd.count = i2c_opt.off_len + i2c_opt.count;
 		cmd.buf = (void*)buf;
 		cmd.last = 0;
 		if (i2c_do_write(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 		break;
 	}
 
 	return (i2c_do_stop(fd));
 }
 
 static int
 i2c_read(int fd, struct options i2c_opt, uint8_t *i2c_buf)
 {
 	struct iiccmd cmd;
 	char data = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.slave = i2c_opt.addr;
 
 	if (i2c_opt.off_len) {
 		cmd.count = 1;
 		cmd.last = 0;
 		cmd.buf = &data;
 		if (i2c_do_start(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 
 		if (write_offset(fd, i2c_opt, &cmd))
 			return (i2c_do_stop(fd) | 1);
 
 		if (i2c_opt.mode == I2C_MODE_STOP_START && i2c_do_stop(fd))
 			return (1);
 	}
 	cmd.slave = i2c_opt.addr | 1;
 	cmd.count = 1;
 	cmd.last = 0;
 	cmd.buf = &data;
 	if (i2c_opt.mode == I2C_MODE_STOP_START || i2c_opt.off_len == 0) {
 		if (i2c_do_start(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 	} else if (i2c_opt.mode == I2C_MODE_REPEATED_START) {
 		if (i2c_do_repeatstart(fd, &cmd))
 			return (i2c_do_stop(fd) | 1);
 	}
 
 	cmd.count = i2c_opt.count;
 	cmd.buf = (void*)i2c_buf;
 	cmd.last = 1;
 	if (i2c_do_read(fd, &cmd))
 		return (i2c_do_stop(fd) | 1);
 
 	return (i2c_do_stop(fd));
 }
 
 /*
  * i2c_rdwr_transfer() - use I2CRDWR to conduct a complete i2c transfer.
  *
  * Some i2c hardware is unable to provide direct control over START, REPEAT-
  * START, and STOP operations.  Such hardware can only perform a complete
  * START-<data>-STOP or START-<data>-REPEAT-START-<data>-STOP sequence as a
  * single operation.  The driver framework refers to this sequence as a
  * "transfer" so we call it "transfer mode".  We assemble either one or two
  * iic_msg structures to describe the IO operations, and hand them off to the
  * driver to be handled as a single transfer.
  */
 static int
 i2c_rdwr_transfer(int fd, struct options i2c_opt, uint8_t *i2c_buf)
 {
 	struct iic_msg msgs[2], *msgp = msgs;
 	struct iic_rdwr_data xfer;
 	int flag = 0;
 
 	if (i2c_opt.off_len) {
 		msgp->flags = IIC_M_WR | IIC_M_NOSTOP;
 		msgp->slave = i2c_opt.addr;
 		msgp->buf   = i2c_opt.off_buf;
 		msgp->len   = i2c_opt.off_len;
 		msgp++;
 		flag = IIC_M_NOSTART;
 	}
 
 	/*
 	 * If the transfer direction is write and we did a write of the offset
 	 * above, then we need to elide the start; this transfer is just more
 	 * writing that follows the one started above.  For a read, we always do
 	 * a start; if we did an offset write above it'll be a repeat-start
 	 * because of the NOSTOP flag used above.
 	 */
 	if (i2c_opt.dir == 'w')
 		msgp->flags = IIC_M_WR | flag;
 	else
 		msgp->flags = IIC_M_RD;
 	msgp->slave = i2c_opt.addr;
 	msgp->len   = i2c_opt.count;
 	msgp->buf   = i2c_buf;
 	msgp++;
 
 	xfer.msgs = msgs;
 	xfer.nmsgs = msgp - msgs;
 
 	if (ioctl(fd, I2CRDWR, &xfer) == -1 )
 		err(1, "ioctl(I2CRDWR) failed");
 
 	return (0);
 }
 
 static int
 access_bus(int fd, struct options i2c_opt)
 {
 	uint8_t i2c_buf[i2c_opt.count];
 	int error;
 	unsigned u, chunk_size = 16;
 
 	/*
 	 * For a write, read the data to be written to the chip from stdin.
 	 */
 	if (i2c_opt.dir == 'w') {
 		if (i2c_opt.verbose && !i2c_opt.binary)
 			fprintf(stderr, "Enter %u bytes of data: ",
 			    i2c_opt.count);
 		if (fread(i2c_buf, 1, i2c_opt.count, stdin) != i2c_opt.count)
 			err(1, "not enough data, exiting\n");
 	}
 
 	if (i2c_opt.mode == I2C_MODE_TRANSFER)
 		error = i2c_rdwr_transfer(fd, i2c_opt, i2c_buf);
 	else if (i2c_opt.dir == 'w')
 		error = i2c_write(fd, i2c_opt, i2c_buf);
 	else
 		error = i2c_read(fd, i2c_opt, i2c_buf);
 
 	if (error == 0) {
 		if (i2c_opt.dir == 'r' && i2c_opt.binary) {
 			(void)fwrite(i2c_buf, 1, i2c_opt.count, stdout);
 		} else if (i2c_opt.verbose || i2c_opt.dir == 'r') {
 			if (i2c_opt.verbose)
 				fprintf(stderr, "\nData %s (hex):\n",
 				    i2c_opt.dir == 'r' ?  "read" : "written");
 
 			for (u = 0; u < i2c_opt.count; u++) {
 				printf("%02hhx ", i2c_buf[u]);
 				if ((u % chunk_size) == chunk_size - 1)
 					printf("\n");
 			}
 			if ((u % chunk_size) != 0)
 				printf("\n");
 		}
 	}
 
 	return (error);
 }
 
 static const char *widths[] = {
 	"0",
 	"8",
 	"16LE",
 	"16BE",
 	"16",
 	NULL,
 };
 
 static int
 command_bus(struct options i2c_opt, char *cmd)
 {
 	int error, fd;
 	char devbuf[64];
 	uint8_t dbuf[BUFSIZ];
 	unsigned bus;
 	const char *width = NULL;
 	const char *err_msg;
 	unsigned offset;
 	unsigned u;
 	size_t length;
 
 	while (isspace(*cmd))
 		cmd++;
 
 	switch(*cmd) {
 	case 0:
 	case '#':
 		return (0);
 	case 'p':
 	case 'P':
 		printf("%s", cmd);
 		return (0);
 	case 'r':
 	case 'R':
 		i2c_opt.dir = 'r';
 		break;
 	case 'w':
 	case 'W':
 		i2c_opt.dir = 'w';
 		break;
 	default:
 		fprintf(stderr,
 		    "Did not understand command: 0x%02x ", *cmd);
 		if (isgraph(*cmd))
 			fprintf(stderr, "'%c'", *cmd);
 		fprintf(stderr, "\n");
 		return(-1);
 	}
 	cmd++;
 
 	bus = strtoul(cmd, &cmd, 0);
 	if (bus == 0 && errno == EINVAL) {
 		fprintf(stderr, "Could not translate bus number\n");
 		return(-1);
 	}
 
 	i2c_opt.addr = strtoul(cmd, &cmd, 0);
 	if (i2c_opt.addr == 0 && errno == EINVAL) {
 		fprintf(stderr, "Could not translate device\n");
 		return(-1);
 	}
 	if (i2c_opt.addr < 1 || i2c_opt.addr > 0x7f) {
 		fprintf(stderr, "Invalid device (0x%x)\n", i2c_opt.addr);
 		return(-1);
 	}
 	i2c_opt.addr <<= 1;
 
 	while(isspace(*cmd))
 		cmd++;
 
 	for(u = 0; widths[u]; u++) {
 		length = strlen(widths[u]);
 		if (memcmp(cmd, widths[u], length))
 			continue;
 		if (!isspace(cmd[length]))
 			continue;
 		width = widths[u];
 		cmd += length;
 		break;
 	}
 	if (width == NULL) {
 		fprintf(stderr, "Invalid width\n");
 		return(-1);
 	}
 
 	offset = strtoul(cmd, &cmd, 0);
 	if (offset == 0 && errno == EINVAL) {
 		fprintf(stderr, "Could not translate offset\n");
 		return(-1);
 	}
 
 	err_msg = encode_offset(width, offset,
 	    i2c_opt.off_buf, &i2c_opt.off_len);
 	if (err_msg) {
 		fprintf(stderr, "%s", err_msg);
 		return(-1);
 	}
 
 	if (i2c_opt.dir == 'r') {
 		i2c_opt.count = strtoul(cmd, &cmd, 0);
 		if (i2c_opt.count == 0 && errno == EINVAL) {
 			fprintf(stderr, "Could not translate length\n");
 			return(-1);
 		}
 	} else {
 		i2c_opt.count = 0;
 		while (1) {
 			while(isspace(*cmd))
 				cmd++;
 			if (!*cmd)
 				break;
 			if (!isxdigit(*cmd)) {
 				fprintf(stderr, "Not a hex digit.\n");
 				return(-1);
 			}
 			dbuf[i2c_opt.count] = digittoint(*cmd++) << 4;
 			while(isspace(*cmd))
 				cmd++;
 			if (!*cmd) {
 				fprintf(stderr,
 				    "Uneven number of hex digits.\n");
 				return(-1);
 			}
 			if (!isxdigit(*cmd)) {
 				fprintf(stderr, "Not a hex digit.\n");
 				return(-1);
 			}
 			dbuf[i2c_opt.count++] |= digittoint(*cmd++);
 		}
 	}
 	assert(bus < N_FDCACHE);
 	fd = fd_cache[bus];
 	if (fd < 0) {
 		(void)sprintf(devbuf, "/dev/iic%u", bus);
 		fd = open(devbuf, O_RDWR);
 		if (fd == -1) {
 			fprintf(stderr, "Error opening I2C controller (%s): %s\n",
 			    devbuf, strerror(errno));
 			return (EX_NOINPUT);
 		}
 		fd_cache[bus] = fd;
 	}
 
 	error = i2c_rdwr_transfer(fd, i2c_opt, dbuf);
 	if (error)
 		return(-1);
 
 	if (i2c_opt.dir == 'r') {
 		for (u = 0; u < i2c_opt.count; u++)
 			printf("%02x", dbuf[u]);
 		printf("\n");
 	}
 	return (0);
 }
 
 static int
 exec_bus(struct options i2c_opt, char *cmd)
 {
 	int error;
 
 	while (isspace(*cmd))
 		cmd++;
 	if (*cmd == '#' || *cmd == '\0')
 		return (0);
 	error = command_bus(i2c_opt, cmd);
 	if (i2c_opt.verbose) {
 		(void)fflush(stderr);
 		printf(error ? "ERROR\n" : "OK\n");
 		error = 0;
 	} else if (error) {
 		fprintf(stderr, "  in: %s", cmd);
 	}
 	(void)fflush(stdout);
 	return (error);
 }
 
 static int
 instruct_bus(struct options i2c_opt, int argc, char **argv)
 {
 	char buf[BUFSIZ];
 	int rd_cmds = (argc == 0);
 	int error;
 
 	while (argc-- > 0) {
 		if (argc == 0 && !strcmp(*argv, "-")) {
 			rd_cmds = 1;
 		} else {
 			error = exec_bus(i2c_opt, *argv);
 			if (error)
 				return (error);
 		}
 		argv++;
 	}
 	if (!rd_cmds)
 		return (0);
 	while (fgets(buf, sizeof buf, stdin) != NULL) {
 		error = exec_bus(i2c_opt, buf);
 		if (error)
 			return (error);
 	}
 	return (0);
 }
 
 int
 main(int argc, char** argv)
 {
 	struct options i2c_opt;
 	const char *dev, *err_msg;
 	int fd, error = 0, ch;
 	const char *optflags = "a:f:d:o:iw:c:m:n:sbvrh";
 	char do_what = 0;
 
 	dev = I2C_DEV;
 	for (ch = 0; ch < N_FDCACHE; ch++)
 		fd_cache[ch] = -1;
 
 	/* Default values */
 	i2c_opt.off = 0;
+	i2c_opt.addr = 0;
 	i2c_opt.verbose = 0;
 	i2c_opt.dir = 'r';	/* direction = read */
 	i2c_opt.width = "8";
 	i2c_opt.count = 1;
 	i2c_opt.binary = 0;	/* ASCII text output */
 	i2c_opt.skip = NULL;	/* scan all addresses */
 	i2c_opt.mode = I2C_MODE_TRANSFER;
 
 	/* Find out what we are going to do */
 
 	while ((ch = getopt(argc, argv, optflags)) != -1) {
 		switch(ch) {
 		case 'a':
 		case 'i':
 		case 'r':
 		case 's':
 			if (do_what)
 				usage("Only one of [-a|-h|-r|-s]");
 			do_what = ch;
 			break;
 		case 'h':
 			usage("Help:");
 			break;
 		default:
 			break;
 		}
 	}
 
 	/* Then handle the legal subset of arguments */
 
 	switch (do_what) {
 	case 0: usage("Pick one of [-a|-h|-i|-r|-s]"); break;
 	case 'a': optflags = "a:f:d:w:o:c:m:bv"; break;
 	case 'i': optflags = "iv"; break;
 	case 'r': optflags = "rf:v"; break;
 	case 's': optflags = "sf:n:v"; break;
 	default: assert("Bad do_what");
 	}
 
 	optreset = 1;
 	optind = 1;
 
 	while ((ch = getopt(argc, argv, optflags)) != -1) {
 		switch(ch) {
 		case 'a':
 			i2c_opt.addr = strtoul(optarg, 0, 16);
 			if (i2c_opt.addr == 0 && errno == EINVAL)
 				usage("Bad -a argument (hex)");
 			if (i2c_opt.addr == 0 || i2c_opt.addr > 0x7f)
 				usage("Bad -a argument (01..7f)");
 			i2c_opt.addr <<= 1;
 			break;
 		case 'b':
 			i2c_opt.binary = 1;
 			break;
 		case 'c':
 			i2c_opt.count = (strtoul(optarg, 0, 10));
 			if (i2c_opt.count == 0 && errno == EINVAL)
 				usage("Bad -c argument (decimal)");
 			break;
 		case 'd':
 			if (strcmp(optarg, "r") && strcmp(optarg, "w"))
 				usage("Bad -d argument ([r|w])");
 			i2c_opt.dir = optarg[0];
 			break;
 		case 'f':
 			dev = optarg;
 			break;
 		case 'i': break;
 		case 'm':
 			if (!strcmp(optarg, "no"))
 				i2c_opt.mode = I2C_MODE_NONE;
 			else if (!strcmp(optarg, "ss"))
 				i2c_opt.mode = I2C_MODE_STOP_START;
 			else if (!strcmp(optarg, "rs"))
 				i2c_opt.mode = I2C_MODE_REPEATED_START;
 			else if (!strcmp(optarg, "tr"))
 				i2c_opt.mode = I2C_MODE_TRANSFER;
 			else
 				usage("Bad -m argument ([no|ss|rs|tr])");
 			break;
 		case 'n':
 			i2c_opt.skip = optarg;
 			break;
 		case 'o':
 			i2c_opt.off = strtoul(optarg, 0, 16);
 			if (i2c_opt.off == 0 && errno == EINVAL)
 				usage("Bad -o argument (hex)");
 			break;
 		case 'r': break;
 		case 's': break;
 		case 'v':
 			i2c_opt.verbose = 1;
 			break;
 		case 'w':
 			i2c_opt.width = optarg;		// checked later.
 			break;
 		default:
 			fprintf(stderr, "Illegal -%c option", ch);
 			usage(NULL);
 		}
 	}
 	argc -= optind;
 	argv += optind;
 	if (do_what == 'i')
 		return(instruct_bus(i2c_opt, argc, argv));
 	if (argc > 0)
 		usage("Too many arguments");
 
 	/* Set default mode if option -m is not specified */
 	if (i2c_opt.mode == I2C_MODE_NOTSET) {
 		if (i2c_opt.dir == 'r')
 			i2c_opt.mode = I2C_MODE_STOP_START;
 		else if (i2c_opt.dir == 'w')
 			i2c_opt.mode = I2C_MODE_NONE;
 	}
 
 	err_msg = encode_offset(i2c_opt.width, i2c_opt.off,
 	    i2c_opt.off_buf, &i2c_opt.off_len);
 	if (err_msg != NULL) {
 		fprintf(stderr, "%s", err_msg);
 		return(EX_USAGE);
 	}
 
-	if (i2c_opt.verbose)
-		fprintf(stderr, "dev: %s, addr: 0x%x, r/w: %c, "
-		    "offset: 0x%02x, width: %s, count: %u\n", dev,
-		    i2c_opt.addr >> 1, i2c_opt.dir, i2c_opt.off,
-		    i2c_opt.width, i2c_opt.count);
-
 	fd = open(dev, O_RDWR);
 	if (fd == -1) {
 		fprintf(stderr, "Error opening I2C controller (%s): %s\n",
 		    dev, strerror(errno));
 		return (EX_NOINPUT);
 	}
 
 	switch (do_what) {
 	case 'a':
+		if (i2c_opt.verbose)
+			fprintf(stderr, "dev: %s, addr: 0x%x, r/w: %c, "
+			    "offset: 0x%02x, width: %s, count: %u\n", dev,
+			    i2c_opt.addr >> 1, i2c_opt.dir, i2c_opt.off,
+			    i2c_opt.width, i2c_opt.count);
 		error = access_bus(fd, i2c_opt);
 		break;
 	case 's':
 		error = scan_bus(dev, fd, i2c_opt.skip, i2c_opt.verbose);
 		break;
 	case 'r':
 		error = reset_bus(dev, fd, i2c_opt.verbose);
 		break;
 	default:
 		assert("Bad do_what");
 	}
 
 	ch = close(fd);
 	assert(ch == 0);
 	return (error);
 }