diff --git a/contrib/bmake/ChangeLog b/contrib/bmake/ChangeLog index 35235e1f8205..5eb2d7c5bb4a 100644 --- a/contrib/bmake/ChangeLog +++ b/contrib/bmake/ChangeLog @@ -1,3499 +1,3730 @@ +2021-12-15 Simon J Gerraty + + * cond.c: fix mem leak in CondParser_Leaf + +2021-12-12 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211212 + Merge with NetBSD make, pick up + o rename Parse_SetInput to Parse_PushInput + o remove remove period from end of error messages and warnings + to be more consistent + o arch.c: use simpler memory management for parsing archive members + o cond.c: rework and reduce recursion + o for.c: rename some functions to better reflect purpose + o suff.c: add Suff_NamesStr to provide .SUFFIXES as a string. + o var.c: in parse errors, mark whitespace more clearly + inline ParseEmptyArg into CondParser_FuncCallEmpty + minimize calls to LazyBuf_Get in ParseVarnameLong + treat .SUFFIXES as a read-only variable + +2021-12-07 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211207 + Merge with NetBSD make, pick up + o inline HashIter_Init + o parse.c: inline common subexpression in ParseRawLine + o var.c: merge branches for modifiers ':D' and ':U' + extract common code into Expr_Words + extract common code into Expr_Str + move low-level implementation details out of Var_Parse + +2021-12-06 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211206 + Merge with NetBSD make, pick up + o add unit-tests/varmod-loop-delete + o for.c: inline Str_Words - reduce memory allocation + o parse.c: do not try to expand fixed variable names + only allocate the name of an included file if necessary + clean up ParseInclude + o var.c: fix use-after-free in modifier ':@' + save a memory allocation in each modifier ':O' and ':u' + save a memory allocation in the modifier ':[...]' + in UnexportVars, replace Str_Words with Substring_Words to + reduce allocations and copying. + +2021-12-04 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211204 + Merge with NetBSD make, pick up + o flesh out a number of tests + o replace enums with bitfields, this simplifies a lot of code. + o var.c: refactor ParseModifierPartSubst + +2021-10-24 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211024 + Merge with NetBSD make, pick up + o Punt on write errors - ENOSPC etc. + +2021-10-22 Simon J Gerraty + + * configure.in: use_defshell, set both DEFSHELL_INDEX + and defshell_path if appropriate. + This makes it easier to use say the KSH specification with + and alternate path for the shell. + + * configure.in compat.c: for SCO we need to force UseShell + + * configure.in: SCO /bin/sh is not usable, provide a list of + alternatives for use as .SHELL. + We still have to mark some tests as broken, plus more if we end up + with ksh as .SHELL. + Issue a warning about skipped tests. + + * boot-strap: leave TOOL_DIFF to configure + + * configure.in: on SCO native cc is not usable, + gcc is to be found in /usr/gnu/bin + and while ancient is at least able to compile bmake. + Thus we add /usr/gnu/bin to PATH if it exists, and later + check if $CC would have been found via $PATH. + If not we set CC to the full path of $CC. + Also gnu diff is known to support -u, so if it exists use it. + + * configure.in: move getopt to AC_REPLACE_FUNCS + also add AC_C_INLINE - in an attempt to compile using + native cc on SCO. + + * configure.in: check for stresep as well as strsep, since we + define the later to the former if necessary, and if we have to + provide stresep we also need to provide a prototype. + + * configure.in: we no longer need to worry about + sys/cdefs.h providing __RCSID which simplifies things quite a bit. + + * make.h: make sure we have __RCSID + + * unit-tests/Makefile.config.in: add TOOL_DIFF so configure + can control it. + +2021-10-20 Simon J Gerraty + + * VERSION: 20211020 + Merge with NetBSD make, pick up + o confirm sync of unit-tests + +2021-10-18 Simon J Gerraty + + * configure.in: check if timezone Europe/Berlin is supported + if not try UTC-1 + * configure.in: if .OBJDIR is $srcdir/obj we need to create a + symlink unit-tests -> ../unit-tests/obj so that + unit-tests/Makefile.config is put in the right place. + * refine filtering of .OBJDIR in unit-tests + +2021-10-16 Simon J Gerraty + + * Fix unit-tests on Minix 3.2.0 + o job.c: do not punt if read of token pipe fails for EAGAIN. + On Minix at least, we are not ready to read the childExitJob pipe + when poll says we are. + There should actually be no reason for this pipe to be + non-blocking, but while that works fine on {Net,Free}BSD it + breaks another test case on Minix. + o unit-tests/Makefile: deal with variants of error messages + and use of obj as .OBJDIR + +2021-10-14 Simon J Gerraty + + * configure.in: add sigaction to AC_REPLACE_FUNCS + we also need to check for sigaddset etc just for the benefit of + sigact.c + + * Add sigact.c as sigaction.c so this "just works". + This should have been done back when bmake_signal started using + sigaction (I only just noticed that sigact.c wasn't here ;-) + Note: I no longer have access to any system where this would matter. + +2021-10-13 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211011 + + * Makefile: cleanup a little + + * configure.in: check for sigsetmask + +2021-10-01 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20211001 + Merge with NetBSD make, pick up + o reduce locations reducing text size + o remove unnecessary const + o cond.c: fix lint warning on i386 + do not allow unquoted 'left == right' after modifier ':?' + o hash.c: fix build for DEBUG_HASH_LOOKUP + o var.c: fix memory leak in error case of the ':?' modifier + +2021-09-11 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20210911 + Merge with NetBSD make, pick up + o var.c: replace remaining ModChain_ShouldEval with Expr_ShouldEval + +2021-09-08 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20210906 + Merge with NetBSD make, pick up + o more unit tests + o lint cleanup + o rename some functions to better fit purpose + o for.c: cleanup - remove unnecessary optimization + fix embedded newlines + o parse.c: correct case for CVS/RCS + +2021-08-11 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20210808 + Merge with NetBSD make, pick up + o var.c: remove redundant initialization in ApplyModifier_Order + + * mk/options.mk: issue warning for incorrect usage + +2021-08-03 Simon J Gerraty + + * var.c: use long for :On if we don't have a 64bit int type + + * VERSION (_MAKE_VERSION): 20210803 + Merge with NetBSD make, pick up + o rework varmod-order tests to avoid qsort instability + o make.1: clarify :On entry + +2021-07-31 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20210731 + Merge with NetBSD make, pick up + o fix some lint issues + o more unit tests + o var.c: rework of ApplyModifier_Order + +2021-07-30 Simon J Gerraty + + * util.c: add strto*l if HAVE_STRTO*L not defined + + * VERSION (_MAKE_VERSION): 20210730 + Merge with NetBSD make, pick up + o var.c: add :On and :Orn for numeric sort + disabled if no 64bit type available. + o _strtol.h: to implement strto*l functions + +2021-07-04 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20210704 + Merge with NetBSD make, pick up + o unit-tests: fix some tests to be more portable + - job-output-null not all shells do the same number of write calls + - objdir-writable if TMPDIR is set; /tmp may not be usable + +2021-07-01 Simon J Gerraty + + * VERSION (_MAKE_VERSION): 20210701 + Merge with NetBSD make, pick up + o unit-tests: allow for BROKEN_TESTS to list TESTS to be skipped; + some tests just cannot work in some environments. + o buf.c: simpler upper bound for length in Buf_AddInt + o cond.c: fix grammar in error message for malformed conditional + o for.c: prevent newline injection (from ${.newline}) in .for loops + o var.c: use more practical data type in RegexReplace + (avoid need for %zu) + extract RegexReplace from ModifyWord_SubstRegex + 2021-06-21 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210621 Merge with NetBSD make, pick up o var.c: only report error for unmatched regex subexpression when linting (-dL) since we cannot tell when an unmatched subexpression is an expected result. o move unmatched regex subexpression tests to varmod-subst-regex.mk and enable strict (lint) mode 2021-06-16 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210616 Merge with NetBSD make, pick up o more unit tests o cond.c: rename If_Eval to EvalBare improve function names for parsing conditions o job.c: fix error handling of targets that cannot be made o var.c: uncompress code in ApplyModifier_Unique 2021-05-18 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210518 Merge with NetBSD make, pick up o fix unit-tests/opt-chdir to cope with /nonexistent existing. o job.c: Print -de error information when running multiple jobs 2021-04-20 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210420 Merge with NetBSD make, pick up o use C99 bool type o convert VarEvalFlags back into an enum o cond.c: do not complain when skipping the condition 'no >= 10' o hash.c: avoid allocating memory for simple variable names o job.c: use distinct wording for writing to the shell commands file remove type name for the abort status in job handling rename PrintOutput to PrintFilteredOutput to avoid confusion o main.c: avoid double slash in name of temporary directory o var.c: use straight quotes for error 'Bad conditional expression' reduce memory allocations in the modifiers ':D' and ':U' rename members of ModifyWord_LoopArgs clean up pattern flags for the modifiers ':S' and ':C' reduce memory allocation and strlen calls in modifier ':from=to' in the ':Q' modifier, only allocate memory if necessary improve performance for LazyBuf remove redundant parameter from ParseVarnameLong migrate ParseModifierPart to use Substring avoid unnecessary calls to strlen when evaluating modifiers migrate ModifyWord functions to use Substring migrate handling of the modifier ':S,from,to,' to Substring reduce debug logging and memory allocation for ${:U...} reduce verbosity of the -dv debug logging for standard cases clean up debug logging for ':M' and ':N' disallow '$' in the variable name of the modifier ':@' simplify access to the name of an expression during evaluation 2021-03-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210330 Merge with NetBSD make, pick up o replace enum bit-field with struct bit-field for VarEvalFlags o rename VARE_NONE to VARE_PARSE_ONLY o var.c: rename ApplyModifiersState to ModChain fix double varname expansion in the variable modifier '::=' change debug log for variable evaluation flags to lowercase 2021-03-14 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210314 Merge with NetBSD make, pick up o var.c: avoid evaluating many modifiers in parse only mode in strict mode (-dL) many variable references are parsed twice, the first time just to report parse errors early, so we want to avoid side effects and wasted effort to the extent possible. 2021-02-26 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210226 Merge with NetBSD make, pick up o remove freestanding freeIt variables link via FStr o var.c: restructure code in ParseVarname to target human readers improve error message for; bad modifier in variable expression unclosed modifier unknown modifier remove redundant parameter of ApplySingleModifier explain non-obvious code around indirect variable modifiers quote ':S' in error message about missing delimiter extract ParseModifier_Match into separate function add context information to error message about ':range' modifier add quotes around variable name in an error message reorder code in ModifyWords use more common parameter order for VarSelectWords make ModifyWord_Subst a little easier to understand do not expand variable name from the command line twice extract ExistsInCmdline from Var_SetWithFlags save a hash map lookup when defining a cmdline variable clean up VarAdd, Var_Delete, Var_ReexportVars use bit-shift expressions for VarFlags constants rename constants for VarFlags rename ExprDefined constants for debug logging rename ExprStatus to ExprDefined split parameters for evaluating variable expressions reduce redundant code around ModifyWords print error about failed shell command before overwriting variable clean up ValidShortVarname, ParseVarnameShort rename VarExprStatus to ExprStatus add functions for assigning the value of an expression rename ApplyModifiersState_Define to Expr_Define condense the code for parsing :S and :C modifiers 2021-02-06 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210206 Merge with NetBSD make, pick up o unit-tests: use private TMPDIR to avoid errors from other users 2021-02-05 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210205 Merge with NetBSD make, pick up o avoid strdup in mkTempFile o always use vfork o rename context and ctxt to scope o rename some VAR constants to SCOPE o Var_ functions, move the scope to the front o use shortcut functions Global_Set and Global_Append o add shortcut Global_Delete for deleting a global variable o rename Var_Delete to Var_DeleteExpand, Var_DeleteVar to Var_Delete o compat.c: when exiting due to an error, print graph information o enum.c: remove overengineered Enum_ValueToString o make.c: remove unused INTERNAL flag remove unused return type of MakeBuildParent o parse.c: replace parse error "Need an operator" with better message o var.c: improve documentation about variable scopes rename Var_ValueDirect to GNode_ValueDirect rename old Var_SetWithFlags to Var_SetExpandWithFlags merge SetVar into Var_SetWithFlags split Var_Exists into plain Var_Exists and Var_ExistsExpand split Var_Append into Var_Append and Var_AppendExpand replace enum bit-set with bit-field o unit-tests/var-op-shell: use kill rather than kill -14 which broke on darwin with recent update. 2021-02-01 Simon J Gerraty * configure.in: check for sig_atomic_t and define it as 'int' if missing. * VERSION (_MAKE_VERSION): 20210201 Merge with NetBSD make, pick up o use sig_atomic_t for caught_sigchld 2021-01-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210130 Merge with NetBSD make, pick up o more unit tests o convert SearchPath to struct o split Buf_Destroy into Buf_Done and Buf_DoneData o for.c: split For_Eval into separate functions rename struct For to struct ForLoop o job.c: do not create empty shell files in jobs mode rename JobOpenTmpFile to JobWriteShellCommands reduce unnecessary calls to waitpid o parse.c: in -dp mode, print stack trace with each diagnostic 2021-01-23 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210123 Merge with NetBSD make, pick up o rename Dir_Expand to SearchPath_Expand o rename Dir_AddDir, reorder parameters of SearchPath_ToFlags o cond.c: fix debug output for comparison operators in conditionals o dir.c: split Dir_FindFile into separate functions 2021-01-20 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210120 Merge with NetBSD make, pick up o fix some more lint nits o refine some unit tests for portability o cond.c: rework parsing 2021-01-10 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210110 Merge with NetBSD make, pick up o fix lint warnings o consistently use boolean expressions in conditions 2021-01-08 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210108 Merge with NetBSD make, pick up o job.c: back to polling token pipe if we want a token o main.c: always print 'stopped in' on first call The execption is if we bail because of an abort token in which case just exit 6. 2021-01-01 Simon J Gerraty * VERSION (_MAKE_VERSION): 20210101 Merge with NetBSD make, pick up o Happy New Year! o rename CmdOpts.lint to strict o exit 2 on technical errors o replace pointers in controlling conditions with booleans o replace global preserveUndefined with VARE_KEEP_UNDEF o compat.c: re-export variables from the actual make process if using vfork this is the effect anyway o cond.c: clean up VarParseResult constants o for.c: fix undefined behavior in SubstVarLong make control flow in SubstVarLong of .for loops more obvious clean up SubstVarShort in .for loops extract ForSubstBody from ForReadMore clean up ForReadMore simplify termination condition for .for loop add error handling for .for loop items job.c: re-export variables from the actual make process parse.c: remove mmap for loading files, only allow files < 1 GiB fix edge case in := with undefined in variable name skip variable expansion in ParseDependencyTargetWord var.c: split ExportVar into separate functions clean up code in extracted ExportVar functions remove dead code from ApplyModifiersIndirect split Var_Subst into easily understandable functions clean up VarParseResult constants 2020-12-25 Simon J Gerraty * main.c: use .MAKE.DEPENDFILE as set by makefiles 2020-12-22 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201222 Merge with NetBSD make, pick up o make DEBUG macro return boolean o parse.c: fix assertion failure for files without trailing newline o var.c: allow .undef to undefine multiple variables at once remove excess newline from parse errors 2020-12-21 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201221 Merge with NetBSD make, pick up o some unit-test updates 2020-12-20 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201220 Merge with NetBSD make, pick up o more unit tests o return FStr from Var_Parse and Var_Value o spell nonexistent consistently o add str_basename to reduce duplicate code o compat.c: fix .ERROR_TARGET in compat -k mode extract InitSignals from Compat_Run extract UseShell from Compat_RunCommand o cond.c: error out if an '.endif' or '.else' contain extraneous text o for.c: rename ForIterate to ForReadMore o hash.c: clean up hash function for HashTable o lst.c: rename Vector.priv_cap to cap o main.c: remove constant parameter from MakeMode o make.c: use symbolic time for 0 in Make_Recheck extract MakeChildren from MakeStartJobs o parse.c: clean up memory handling in VarAssign_EvalShell, Parse_DoVar fix error message for .info/.warning/.error without argument extract Var_Undef from ParseDirective extract ParseSkippedBranches, ParseForLoop from ParseReadLine rename mode constants for ParseGetLine to be more expressive reduce debugging details in Parse_SetInput fix line numbers in .for loops split ParseGetLine into separate functions fix garbled output for failed shell command var.c: remove redundant assignment in ApplyModifier_SysV error out on unknown variable modifiers at parse time remove wrong error message for indirect modifier in lint mode extract ApplySingleModifier from ApplyModifiers use FStr for memory management in Var_SetWithFlags extract SetVar from Var_SetWithFlags use FStr in VarNew extract string functions from ApplyModifier_To error out if .undef has not exactly 1 argument extract Var_DeleteVar from Var_Delete extract Var_Undef from ParseDirective clean up memory management for expanding variable expressions 2020-12-12 Simon J Gerraty * avoid %zu * lst.c: avoid anonymous union * VERSION (_MAKE_VERSION): 20201212 Merge with NetBSD make, pick up o more unit tests o inline Targ_Ignore and Targ_Silent o split JobFlags into separate fields o remove const from function parameters (left overs from refactoring) o eliminate boolean argument of Var_Export o make API of Buf_Init simpler o rename ParseRunOptions to ParseCommandFlags o replace *line with line[0] o compat.c: fix wrong exit status for multiple failed main targets refactor Compat_Run to show the error condition more clearly don't make .END if the main targets already failed (-k mode) fix exit status in -k mode if a dependency fails o for.c: clean up Buf_AddEscaped in .for loops o job.c: extract ShellWriter_ErrOn from JobPrintCommand make Job_Touch simpler refactor JobFinish rename Shell.exitFlag to errFlag move Job.xtraced to ShellWriter make printing of shell commands independent from the job rename shell flags in struct Shell extract JobOpenTmpFile from JobStart rename RunFlags to CommandFlags split various Job.* into separate fields rename commandShell to shell extract InitShellNameAndPath from Shell_Init replace signal handling macros with local functions replace macro MESSAGE with local function parse.c: error out on null bytes in makefiles error out on misspelled directives rename IFile.nextbuf to readMore fix undefined behavior in ParseEOF str.c: remove redundant call to strlen in Str_Words var.c: error out on misspelled .unexport-env error out on misspelled .export directives extract ExportVars from Var_Export extract ExportVarsExpand from Var_Export eliminate boolean argument of Var_Export fix undefined behavior when exporting ${:U } rename Var_ExportVars to Var_ReexportVars rename Var_Export1 to ExportVar 2020-12-06 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201206 Merge with NetBSD make, pick up o more unit tests o inline macros for debug logging o use consistent variable names for list nodes o define constants for enum zero-values o dir.c: use fixed format for debug output of the directory cache remove Dir_InitDir o lst.c: inline Lst_Enqueue, Vector_Done o meta.c: remove unused parameter from meta_needed o parse.c: rename parse functions o suff.c: extract ExpandChildrenRegular from ExpandChildren o targ.c: don't concatenate identifiers in Targ_PrintType o var.c: remove comment decoration extract UnexportVars from Var_UnExport extract GetVarnamesToUnexport from Var_UnExport extract UnexportEnv from Var_UnExport extract UnexportVar from Var_UnExport move CleanEnv to UnexportVars replace pointer comparisons with enum add FStr to var.c to make memory handling simpler use FStr in Var_UnExport move type definitions in var.c to the top extract FreeEnvVar from Var_Parse extract ShuffleStrings from ApplyModifier_Order 2020-11-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201130 Merge with NetBSD make, pick up o add unit tests for META MODE o reduce memory allocation for dirSearchPath, GNode.parents, GNode.children, OpenDirs o reduce pointer indirection for GNode.cohorts and GNode.implicitParents o remove pointer indirection from GNode.commands o inline Lst_ForEachUntil in meta mode o dir.c: fix memory leak for lstat cache in -DCLEANUP mode clean up memory management for CachedDirs fix the reference count of dotLast going negative add debug logging for OpenDirs_Done extract CacheNewDir from Dir_AddDir add debug logging for reference counting of CachedDir rename some Dir functions to SearchPath o job.c: rename some global variables o main.c: reduce memory allocation in ReadBuiltinRules reduce memory allocation in CmdOpts.create, CmdOpts.variables, CmdOpts.makefiles Add .MAKE.UID and .MAKE.GID o make.c: reduce memory allocation for/in toBeMade, Make_ProcessWait, Make_ExpandUse o meta.c: reduce memory allocation in meta_oodate o parse.c: reduce memory allocations for parsing dependencies and targets o suff.c: reduce memory allocation in suffix handling 2020-11-24 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201124 Merge with NetBSD make, pick up o .MAKE.{UID,GID} represent uid and gid running make. o fix error handling for .BEGIN and .END dependency in -k mode o fix missing "Stop." after failed .END node in -k mode o use properly typed comparisons in boolean contexts o replace a few HashTable_CreateEntry with HashTable_Set o add HashSet type o compat.c: split Compat_Make into smaller functions extract DebugFailedTarget from Compat_RunCommand o dir.c: refactor Dir_UpdateMTime migrate CachedDir.files from HashTable to HashSet o make.c: add high-level API for GNode.made 2020-11-22 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201122 Merge with NetBSD make, pick up o rename GNode.context to vars o suff.c: cleanup and refactor rename some functions and vars to better reflect usage add high-level API for CandidateSearcher o targ.c: add more debug logging for suffix handling o more unit tests o add debug logging for setting and resetting the main target 2020-11-17 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201117 Merge with NetBSD make, pick up o fix some unit-tests when .SHELL is dash o rename Targ_NewGN to GNode_New o make some GNode functions const o main.c: call Targ_Init before Var_Init cleanup PrintOnError, getTmpdir and ParseBoolean o var.c: fix error message of failed :!cmd! modifier 2020-11-14 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201114 Merge with NetBSD make, pick up o replace a few HashTable_CreateEntry with HashTable_Set o clean up cached_stats o rename DEFAULT to defaultNode o remove redundant struct make_stat o cond.c: in lint mode, check for ".else " use bitset for IfState replace large switch with if-else in Cond_EvalLine o job.c: clean up JobExec, JobStart, JobDoOutput use stderr for error message about failed touch clean up Job_Touch replace macro DBPRINTF with JobPrintln rename JobState to JobStatus main.c: switch cache for realpath from GNode to HashTable clean up Fatal clean up InitDefSysIncPath use progname instead of hard-coded 'make' in warning rename Main_SetVarObjdir to SetVarObjdir make.1: document the -S option make.c: fix debug output for GNode details use symbolic names in debug output of GNodes 2020-11-12 Simon J Gerraty * configure.in: fix --with-force-machine-arch * VERSION (_MAKE_VERSION): 20201112 Merge with NetBSD make, pick up o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable checks in InitObjdir. Explicit .OBJDIR target always allows read-only directory. o cond.c: clean up Cond_EvalLine 2020-11-11 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201111 Merge with NetBSD make, pick up o more unit-tests o style cleanup remove redundant parentheses from sizeof operator replace character literal 0 with '\0'. replace pointer literal 0 with NULL. remove redundant parentheses. replace (expr & mask) == 0 with !(expr & mask). use strict typing in conditions of the form !var o rename Make_OODate to GNode_IsOODate o rename Make_TimeStamp to GNode_UpdateYoungestChild o rename Var_Set_with_flags to Var_SetWithFlags o rename dieQuietly to shouldDieQuietly o buf.c: make API of Buf_Init simpler o compat.c: clean up Compat_Make, Compat_RunCommand, CompatDeleteTarget and CompatInterrupt o cond.c: in lint mode, only allow '&&' and '||', not '&' and '|' clean up CondParser_Comparison o main.c: rename getBoolean and s2Boolean rename MAKEFILE_PREFERENCE for consistency o parse.c: replace strstr in ParseMaybeSubMake with optimized code o var.c: rename VARE_ASSIGN to VARE_KEEP_DOLLAR replace emptyString with allocated empty string error out on unclosed expressions after the colon 2020-11-01 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201101 Merge with NetBSD make, pick up o negate NoExecute to GNode_ShouldExecute o job.c: rename JobMatchShell to FindShellByName extract EscapeShellDblQuot from JobPrintCommand extract ParseRunOptions from JobPrintCommand o var.c: extract ApplyModifiersIndirect from ApplyModifiers treat malformed :range, :ts and :[...] as errors add tests for the variable modifiers :[words] and :range 2020-10-31 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201031 Merge with NetBSD make, pick up o format #include directives consistently o do not look up local variables like .TARGET anywhere else o main.c: Main_SetObjdir is first called for curdir which may be readonly reduce the scope where recursive expressions are detected remove redundant :tl from getBoolean clean up mkTempFile o meta.c: simplify memory allocation in meta_create and meta_oodate o parse.c: extract loadedfile_mmap from loadfile o trace.c: document possible undefined behavior with .CURDIR o var.c: make parsing of the :gmtime and :localtime modifiers stricter rename ismeta to is_shell_metachar remove debug logging for the :Q variable modifier rename VarIsDynamic to VarnameIsDynamic use consistent parameter order in varname parsing functions extract ParseVarnameLong from Var_Parse extract ParseVarnameShort from Var_Parse fix type of ParseModifierPart parameter delim extract IsEscapedModifierPart from ParseModifierPart clean up ModifyWords add test for combining the :@ and :? variable modifiers 2020-10-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201030 Merge with NetBSD make, pick up o change char * to void * in Var_Value o make iterating over HashTable simpler o rename VAR_CMD to VAR_CMDLINE o cond.c: clean up is_separator fix parse error in string literal in conditional o main.c: do not use objdir that is not writable in lint mode, exit with error status on errors o parse.c: clean up StrContainsWord fix out-of-bounds pointer in ParseTrackInput o var.c: rename Str_SYSVMatch and its parameters remove unsatisfiable conditions in Var_Set_with_flags document where the variable name is expanded fix documentation for VARP_SUB_ONE rename VAR_EXPORTED_YES to VAR_EXPORTED_SOME document VAR_READONLY prevent appending to read-only variables extract MayExport from Var_Export1 remove redundant evaluations in VarFind replace VarFindFlags with a simple Boolean rename FIND_CMD to FIND_CMDLINE, to match VAR_CMDLINE 2020-10-28 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201028 Merge with NetBSD make, pick up o rename defIncPath to defSysIncPath o initialize all CmdOpts fields o lst.c: inline Vector_Get o main.c: refactor main extract InitMaxJobs,InitObjdir,InitVarMake,InitRandom, ReadMakefiles,CleanUp,InitVpath,ReadBuiltinRules, InitDefIncPath,CmdOpts_Init,UnlimitFiles o parse.c: merge curFile into includes rename predecessor to order_pred sort ParseSpecial alphabetically remove unused, undocumented .NOEXPORT rename ParseSpecial enum values consistently rename some fields of struct IFile 2020-10-26 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201026 Merge with NetBSD make, pick up o group the command line options and arguments into a struct o rename GNode.cmgn to youngestChild o rename hash functions to identify the type name o negate OP_NOP and rename it to GNode_IsTarget o add GNode_Path to access the path of a GNode o remove macros MIN and MAX o remove unused Lst_Find and Lst_FindFrom o arch.c: and make Arch_FindLib simpler clean up code layout make Arch_ParseArchive simpler o cond.c: inline CondFindStrMatch into FuncMake o dir.c: replace Dir_CopyDir with Dir_CopyDirSearchPath omit trailing space in debug output for expanding file patterns refactor DirMatchFiles document that the SearchPath of Dir_FindFile may be NULL remove UNCONST from Dir_Expand inline DirFindName o for.c: clean up code for handling .for loops o hash.c: print hash in debug log with fixed width clean up hash table functions reduce amount of string hashing o job.c: refactor JobDeleteTarget use proper enum constants for aborting convert result of JobStart from macros to enum convert abort reason macros to enum rework Job_CheckCommands to reduce indentation rename Shell fields add field names in declaration of DEFSHELL_CUSTOM convert JobState and JobFlags to enum types move handling of the "..." command to JobPrintCommands o lst.c: clean up refactor LstNodeNew remove Lst_Open, Lst_Next, Lst_Close remove code for circular lists from Lst_Next o main.c: do not attempt to read .MAKE.DEPENFILE if set to /dev/null or anything starting with "no" convert macros for debug flags into enum o make.c: inline Lst_Copy in Make_ExpandUse o meta.c: inline Lst_Find in meta_oodate make Lst_RemoveIf simpler in meta_oodate o parse.c: convert error level for Parse_Error to an enum o suff.c: properly terminate debug output with newline add more details to DEBUG_SRC log replace Dir_CopyDir with Dir_CopyDirSearchPath don't modify GNode name while rebuilding the suffix graph o var.c: reduce duplicate code in VarFind 2020-10-22 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201022 Merge with NetBSD make, pick up o more refactoring and simplification to reduce code size o var.c: extract CanonicalVarname from VarFind o make.c: extract UpdateImplicitParentsVars from Make_Update o main.c: extract PrintVar from doPrintVars extract HandlePWD from main o lst.c: inline simple Lst getters remove unused Lst_ForEach o job.c: move struct Shell from job.h to job.c o more unit tests 2020-10-19 Simon J Gerraty * configure.in: remove inappropriate use of AC_INCLUDES_DEFAULT 2020-10-18 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201018 Merge with NetBSD make, pick up o remove USE_IOVEC o rename some Hash_* apis to Hash* o replace execError with execDie o rename Lst_Init to Lst_New o add tags to enum types o rename Stack to Vector o parse.c: more refactoring o unit-tests: make some tests use line buffered stdout o unit-tests/Makefile: in meta mode do not make all tests depend on Makefile, it isn't necessary. 2020-10-10 Simon J Gerraty * main.c: check for CTL_HW being defined. * unit-tests/Makefile: ensure export tests output are POSIX compliant disable opt-debug-jobs test until it works on ubuntu * VERSION (_MAKE_VERSION): 20201010 Merge with NetBSD make, pick up o dir.c: remove pathname limit for Dir_FindHereOrAbove o hash.c: replace strcpy with memcpy in Hash_CreateEntry o main.c: extract init_machine and init_machine_arch from main allow to disable debug logging options o parse.c: enable format string truncation warnings extract parsing of sources from ParseDoDependency split ParseDoSrc into smaller functions hide implementation details from Parse_DoVar clean up parsing of variable assignments split Parse_DoVar into manageable pieces don't modify the given line during Parse_DoVar fix out-of-bounds memory access in Parse_DoVar fix parsing of the :sh assignment modifier o var.c: rework memory allocation for the name of variables extract ApplyModifier_Literal into separate function in lint mode, reject modifiers without delimiter do not export variable names starting with '-' o fix double-free bug in -DCLEANUP mode o more cleanup to enable higher warnings level o more unit tests 2020-10-02 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201002 Merge with NetBSD make, pick up o dir.c: use hash table for looking up open directories by name o main.c: clean up option handling o parse.c: add missing const for Parse_AddIncludeDir o var.c: ApplyModifier_To, update pp in each branch o remove redundant function prototypes o more unit tests 2020-10-01 Simon J Gerraty * VERSION (_MAKE_VERSION): 20201001 Merge with NetBSD make, pick up o compat.c: comment about "..." 2020-09-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200930 Merge with NetBSD make, pick up o job.c: split Job.jobPipe into 2 separate fields replace Lst_Open with direct iteration o lst.c: remove redundant assertions o targ.c: replace Lst_Open with direct iteration o var.c: fix bug in evaluation of indirect variable modifiers extract ApplyModifier_Quote into separate function o make debug logging simpler 2020-09-27 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200927 Merge with NetBSD make, pick up o parse.c: ensure parse errors result in 'stopped in' message. o compat.c: make parameter of Compat_RunCommand const o main.c: extract InitVarTarget from main o parse.c: rename ParseFinishLine to FinishDependencyGroup refactor ParseDoDependency o var.c: Var_Subst no longer returns string result rename Var_ParsePP back to Var_Parse in lint mode, improve error handling for undefined variables extract ParseVarname from Var_Parse o rename Lst_ForEach to Lst_ForEachUntil o inline Lst_ForEachUntil in several cases o clean up API for finding and creating GNodes o fix assertion failure in -j mode with .END node o inline and remove LstNode_Prev and LstNode_Next o use fine-grained type names for lists and their nodes o more unit tests 2020-09-11 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200911 Merge with NetBSD make, pick up o cond.c: split EvalComparison into smaller functions reorder parameters of condition parsing functions reduce code size in CondParser_Eval rename CondGetString to CondParser_String add CondLexer_SkipWhitespace group the condition parsing state into a struct in CondGetString, replace repeated Buf_Add with Buf_AddStr o migrate Var_Parse to Var_ParsePP o add wrappers around ctype.h functions o lst.c: use a stack instead of a list for the nested include path o more unit tests 2020-09-04 Simon J Gerraty * make-bootstrap.sh.in: adjust object list 2020-09-02 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200902 Merge with NetBSD make, pick up o use make_stat to ensure no confusion over valid fields returned by cached_stat o var.c: make VarQuote const-correct o add unit tests for .for 2020-09-01 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200901 Merge with NetBSD make, pick up o rename Hash_Table fields o make data types in Dir_HasWildcards more precise 2020-08-31 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200831 Merge with NetBSD make, pick up o suff.c: fix unbalanced Lst_Open/Lst_Close in SuffFindCmds o lst.c: Lst_Open renable assert that list isn't open o unit test for .TARGET dependent flags o var.c: fix aliasing bug in VarUniq o more unit tests for :u 2020-08-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200830 Merge with NetBSD make, pick up o allow for strict type checking for Boolean o Var_Parse never returns NULL o Var_Subst never returns NULL o Lst_Find now takes boolean match function o rename Lst_Memeber to Lst_FindDatum o rename LstNode functions to match their type o rename GNode.iParents to implicitParents o fix assertion failure for .SUFFIXES in archives o compat.c: clean up documentation for CompatInterrupt and Compat_Run remove unreachable code from CompatRunCommand o main.c: simplify getBoolean o stc.c: replace brk_string with simpler Str_Words o suff.c: add debug macros 2020-08-28 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200828 Merge with NetBSD make, pick up o lst.c: inline LstIsValid and LstNodeIsValid o remove trailing S from Lst function names after migration complete o more comment cleanup/clarification o suff.c: clean up suffix handling o more unit tests 2020-08-26 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200826 Merge with NetBSD make, pick up o enum.c: distinguish between bitsets containing flags and ordinary enums o var.c: fix error message for ::!= modifier with shell error o fix bugs in -DCLEANUP mode 2020-08-24 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200824 Merge with NetBSD make, pick up o in debug mode, print GNode details in symbols 2020-08-23 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200823 Merge with NetBSD make, pick up o lst.c: more asserts, make args to Lst_Find match others. o var.c: pass flags to VarAdd o arch.c: use Buffer o str.c: brk_string return size_t for nwords o more unit tests 2020-08-22 Simon J Gerraty * VERSION (_MAKE_VERSION): Merge with NetBSD make, pick up o var.c: support for read-only variables eg .SHELL being the shell used to run scripts. o lst.c: more simplification o more documentation and style cleanup o more unit tests o ensure unit-test/Makefile is run by TEST_MAKE o reduce duplication of header inclusion 2020-08-21 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200821 Merge with NetBSD make, pick up o lst.c: revert invalid assertion - but document it o dir.c: split Dir_Init into two functions 2020-08-20 Simon J Gerraty * lst.c: needs inttypes.h on Linux * VERSION (_MAKE_VERSION): 20200820 Merge with NetBSD make, pick up o make.1: clarify some passages o var.c: more cleanup, clarify comments o make_malloc.c: remove unreachable code o cond.c: make CondGetString easier to debug o simplify list usage o unit-tests: more 2020-08-16 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200816 Merge with NetBSD make, pick up o refactor unit-tests to be more fine grained not all tests moved yet 2020-08-14 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200814 Merge with NetBSD make, pick up o more str_concat variants o more enums for flags o var.c: cleanup for higher warnings level 2020-08-10 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200810 Merge with NetBSD make, pick up o more unit tests o general comment and style cleanup 2020-08-08 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200808 Merge with NetBSD make, pick up o enum.[ch]: streamline, enums for use in flags and debug output o cond.c: cleanup o var.c: reduce duplicate code for modifiers debug logging for Var_Parse more detailed debug output o more unit tests 2020-08-06 Simon J Gerraty * unit-tests/Makefile: -r for recursive and include Makefile.inc so I can run tests in meta mode supress extra noise if in meta mode * VERSION (_MAKE_VERSION): 20200806 Merge with NetBSD make, pick up o parse.c: remove VARE_WANTRES for LINT we just want to check parsing (for now). 2020-08-05 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200805 Merge with NetBSD make, pick up o make.1: Rework the description of dependence operators 2020-08-03 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200803 Merge with NetBSD make, pick up o revert some C99 usage, for max portability o unit-tests/lint 2020-08-02 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200802 Merge with NetBSD make, pick up o more unit tests 2020-08-01 Simon J Gerraty * Remove NetBSD specific plumbing from unit-tests/Makefile * VERSION (_MAKE_VERSION): 20200801 Merge with NetBSD make, pick up o make Var_Value return const o size_t for buf sizes o optimize some buffer operations - avoid strlen 2020-07-31 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200731 Merge with NetBSD make, pick up o var.c: fix undefinded behavior for incomplete :t modifier fixes unit-test/moderrs on Ubuntu o parse.c: When parsing variable assignments other than := if DEBUG(LINT) test substition of value, so we get a file and line number in the resulting error. o dir.c: fix parsing of nested braces in dependency lines add unit-tests 2020-07-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200730 Merge with NetBSD make, pick up o var.c: minor cleanup o unit-tests: more tests to improve code coverage 2020-07-28 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200728 Merge with NetBSD make, pick up o var.c: more optimizations 2020-07-26 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200726 Merge with NetBSD make, pick up o collapse lsd.lib into lst.c - reduce code size and allow inlining o lots of function comment updates o var.c: more optimizations o make return of Var_Parse const 2020-07-20 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200720 Merge with NetBSD make, pick up o DEBUG_HASH report stats at end and tone down the noise o var.c: each flag type gets its own prefix. move SysV string matching to var.c make ampersand in ${VAR:from=to&} an ordinary character cleanup and simplify implementation of modifiers o make.1: move documentation for assignment modifiers 2020-07-18 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200718 Merge with NetBSD make, pick up o DEBUG_HASH to see how well the hash tables are working 2020-07-11 Simon J Gerraty * bsd.after-import.mk: make sure we update unit-tests/Makefile 2020-07-10 Simon J Gerraty * configure.in: use AC_INCLUDES_DEFAULT rather than AC_HEADER_STDC * VERSION (_MAKE_VERSION): 20200710 Merge with NetBSD make, pick up o filemon/filemon_dev.c: use O_CLOEXEC rather than extra syscall o meta.c: target flagged .META is out-of-date if meta file missing 2020-07-09 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200709 Merge with NetBSD make, pick up o cond.c: fix for compare_expression when doEval=0 o unit-tests/Makefile: rework o filemon/filemon_dev.c: ensure filemon fd is closed on exec. 2020-07-04 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200704 Merge with NetBSD make, pick up (most of this by rillig@) o lots of style and white-space cleanup o lots more unit tests for variable modifiers o simplified description of some functions o str.c: refactor Str_Match o var.c: debugging output for :@ constify VarModify parameter fix :hash modifier on 16-bit platforms remove unnecessary forward declarations refactor ApplyModifier_SysV to have less indentation simplify code for :E and :R clean up code for :H and :T refactor ApplyModifiers * var.c: we need stdint.h on some platforms to get uint32_t * unit-test/Makefile: we need to supress the specific error for RE substitution error in modmisc, since it varies accross different OS. 2020-07-02 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200702 Merge with NetBSD make, pick up o var.c: more improvements to avoiding unnecessary evaluation use enums for flags o remove flags arg to Var_Set which outside of var.c is always 0 2020-07-01 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200701 Merge with NetBSD make, pick up o var.c: with change to cond.c; ensure that nested variables within a variable name are expanded. o unit-tests/varmisc.mk: test for nested varname 2020-06-29 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200629 Merge with NetBSD make, pick up o cond.c: do not eval unnecessary terms of conditionals. 2020-06-25 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200625 Merge with NetBSD make, pick up o meta.c: report error if lseek in filemon_read fails 2020-06-22 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200622 Merge with NetBSD make, pick up o dieQuietly: ignore OP_SUBMAKE as too aggressive 2020-06-19 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200619 Merge with NetBSD make, pick up o str.c: performance improvement for Str_Match for multiple '*' o dieQuietly: supress the failure output from make when failing node is a sub-make or a sibling failed. This cuts down greatly on unhelpful noise at the end of build log. Disabled by -dj or .MAKE.DIE_QUIETLY=no 2020-06-10 Simon J Gerraty * FILES: add LICENSE to appease some packagers. This is an attempt to fairly represent the license on almost 200 files, which are almost all BSD-3-Clause The few exceptions being more liberal. * VERSION (_MAKE_VERSION): 20200610 Merge with NetBSD make, pick up o unit test for :Or 2020-06-06 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200606 Merge with NetBSD make, pick up o make.1: cleanup * Makefile: fix depends for main.o which broke MAKE_VERSION 2020-06-05 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200605 Merge with NetBSD make, pick up o dir.c: cached_stats - don't confuse stat and lstat results. o var.c: add :Or for reverse sort. 2020-05-24 Simon J Gerraty * configure.in: add AC_PROG_CC_C99 for mipspro compiler also if --with-filemon= specifies path to filemon.h set use_filemon=dev * dirname.c: remove include of namespace.h 2020-05-17 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200517 Merge with NetBSD make, pick up o modified dollar tests to avoid shell dependencies o new tests for .INCLUDEFROM 2020-05-16 Simon J Gerraty * unit-tests/dollar.mk: tweak '1 dollar literal' test to not depend so much on shell behavior 2020-05-10 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200510 Merge with NetBSD make, pick up o unit test for dollar handling 2020-05-06 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200506 Merge with NetBSD make, pick up o str.c: empty string does not match % pattern plus unit-test changes 2020-05-04 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200504 May the 4th be with you Merge with NetBSD make, pick up o var.c: import handling of old sysV style modifier using '%' o str.c: refactor brk_string o unit-tests: add test case for lazy conditions 2020-04-18 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200418 * configure.in: use_makefile=no for cygwin et al. case insensitive filesystems just don't work if both makefile and Makefile exist. NOTE: bmake does not support cygwin and likely never will, but if brave souls want to try it - help them out. 2020-04-02 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200402 Merge with NetBSD make, pick up o meta.c: meta_oodate, CHECK_VALID_META is too aggressive for CMD a blank command is perfectly valid. 2020-03-30 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200330 Merge with NetBSD make, pick up o make.h: extern debug_file 2020-03-18 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200318 Merge with NetBSD make, pick up o meta.c: meta_oodate, check for corrupted meta file earlier and more often. 2020-02-20 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200220 2020-02-19 Simon J Gerraty * boot-strap: unset MAKEFLAGS 2020-02-12 Simon J Gerraty * VERSION (_MAKE_VERSION): 20200212 * meta.c: meta_compat_parent check for USE_FILEMON patch from Soeren Tempel 2020-02-05 Simon J Gerraty * VERSION: 20200205 Merge with NetBSD make, pick up o meta.c: fix compat mode, need to call meta_job_output() o job.c: extra fds for meta mode not needed if using filemon_dev 2020-01-22 Simon J Gerraty * VERSION: 20200122 Merge with NetBSD make, pick up o meta.c: avoid passing NULL to filemon_*() when meta_needed() returns FALSE. 2020-01-21 Simon J Gerraty * VERSION: 20200121 Merge with NetBSD make, pick up o filemon/filemon_{dev,ktrace}.c: allow selection of filemon implementation. filemon_dev.c uses the kernel module while filemon_ktrace.c leverages the fktrace api available in NetBSD. filemon_ktrace.c can hopefully form the basis for adding support for other tracing mechanisms such as strace on Linux. o meta.c: when target is out-of-date per normal make rules record value of .OODATE in meta file. 2019-09-26 Simon J Gerraty * VERSION: 20190926 Merge with NetBSD make, pick up o parse.c: don't pass NULL to realpath(3) some versions cannot handle it. 2019-04-09 Simon J Gerraty * VERSION: 20190409 Merge with NetBSD make, pick up o parse.c: ParseDoDependency: free paths rather than assert 2018-12-22 Simon J Gerraty * VERSION: 20181222 * configure.in: add --without-makefile to avoid generating makefile and make-bootstrap.sh * include Makefile.inc if it exists * Use Makefile and Makefile.config.in in unit-tests so we can use just: make obj && make && make test when bmake is already available. We add --without-makefile to CONFIGURE_ARGS in this case. * tweak bsd.after-import.mk (captures Makefile.config etc after import to FreeBSD for example) to cope with all the above. 2018-12-21 Simon J Gerraty * VERSION: 20181221 Merge with NetBSD make, pick up o parse.c: ParseVErrorInternal use .PARSEDIR and apply if relative, and then use .PARSEFILE for consistent result. 2018-12-20 Simon J Gerraty * VERSION: 20181220 Merge with NetBSD make, pick up o parse.c: ParseVErrorInternal use .CURDIR if .PARSEDIR is relative o var.c: avoid SEGFAULT in .unexport-env when MAKELEVEL is not set 2018-12-16 Simon J Gerraty * VERSION: 20181216 Merge with NetBSD make, pick up o fix for unit-tests/varquote.mk on Debian 2018-09-21 Simon J. Gerraty * VERSION: 20180919 Merge with NetBSD make, pick up o var.c: add :q o dir.c: cleanup caching of stats 2018-09-21 Simon J Gerraty * Makefile.config.in: use += where it makes sense. 2018-05-12 Simon J. Gerraty * VERSION: 20180512 Merge with NetBSD make, pick up o job.c: skip polling job token pipe 2018-04-05 Simon J. Gerraty * VERSION: 20180405 Merge with NetBSD make, pick up o parse.c: be more cautious about detecting depenency line rather than sysV style include. 2018-02-22 Simon J. Gerraty * VERSION: 20180222 Merge with NetBSD make, pick up o parse.c: avoid calling sysconf for every call to loadfile 2018-02-18 Simon J. Gerraty * VERSION: 20180218 Merge with NetBSD make, pick up o var.c: Var_Set handle NULL value anytime. 2018-02-12 Simon J. Gerraty * VERSION: 20180212 Merge with NetBSD make, pick up o parse.c: do not treat .info as warning with -W 2017-12-07 Simon J. Gerraty * VERSION: 20171207 Merge with NetBSD make, pick up o var.c: Var_Append use Var_Set if var not previously set so that VAR_CMD is handled correctly. Add a suitable unit-test. 2017-11-26 Simon J. Gerraty * VERSION (_MAKE_VERSION): 20171126 * aclocal.m4: use AC_LINK_IFELSE for AC_C___ATTRIBUTE__ since AC_TRY_COMPILE puts input inside main() which upsets modern compilers. 2017-11-18 Simon J. Gerraty * VERSION: 20171118 Merge with NetBSD make, pick up o var.c: do not append to variable set on command line add unit-test to catch this. 2017-10-28 Simon J. Gerraty * VERSION: 20171028 Merge with NetBSD make, pick up o main.c: ignore empty MAKEOBJDIR * Makefile.config.in: make @prefix@ @machine*@ and @default_sys_path@ defaults. 2017-10-05 Simon J. Gerraty * VERSION: 20171005 * unit-tests/dotwait.mk: redirect stderr through pipe for more consistent result on some platforms. 2017-08-13 Simon J. Gerraty * machine.sh: entry for AIX 2017-08-12 Simon J. Gerraty * VERSION (_MAKE_VERSION): Move the setting of _MAKE_VERSION to a file that can be included by configure as well as make. This allows configure to set set _MAKE_VERSION in make-bootstrap.sh 2017-08-10 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170810 Merge with NetBSD make, pick up o meta.c: if target is in subdir we only need subdir name in meta_name. 2017-07-20 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170720 Merge with NetBSD make, pick up o compat.c: pass SIGINT etc onto child and wait for it to exit before we self-terminate. 2017-07-11 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170711 forgot to update after merge on 20170708 ;-) o main.c: refactor to reduce size of main function. add -v option to always fully expand values. o meta.c: ensure command output in meta file has ending newline even when filemon not being used. When matching ${.MAKE.META.IGNORE_PATTERNS} do not use pathname via ':L' since any ':' in pathname breaks that. Instead set a '${.p.}' to pathname in the target context and use that. 2017-05-10 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170510 Merge with NetBSD make, pick up o main.c: Main_SetObjdir: ensure buf2 is in scope 2017-05-08 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170505 see mk/ChangeLog 2017-05-05 Simon J. Gerraty * parse.c: not everyone has stdint.h 2017-05-01 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170501 see mk/ChangeLog 2017-04-21 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170421 Merge with NetBSD make, pick up o str.c: Str_Match: fix closure tests for [^] and add unit-test. 2017-04-20 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170420 Merge with NetBSD make, pick up o main.c: only use -C arg "as is" if it contains no relative component. 2017-04-18 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170418 Merge with NetBSD make, pick up o main.c: fix Main_SetObjdir() for relative paths (eg obj). 2017-04-17 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170417 Merge with NetBSD make, pick up o fixes a number of coverity complaints - check return value of fseek, fcntl - plug memory leak in Dir_FindFile, Var_LoopExpand, JobPrintCommand, ParseTraditionalInclude - use bmake_malloc() where NULL is not tollerated - use MAKE_ATTR_UNUSED rather that kludges like return(unused ? 0 : 0) - use purge_cached_realpaths() rather than abuse cached_realpath() 2017-04-13 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170413 Merge with NetBSD make, pick up o main.c: when setting .OBJDIR ignore '$' in paths. * job.c: use MALLOC_OPTIONS to set malloc_options. 2017-04-11 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170411 Merge with NetBSD make, pick up o str.c: Str_Match: allow [^a-z] to behave as expected. 2017-03-26 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170326 Merge with NetBSD make, pick up o main.c: purge relative paths from realpath cache when .OBJDIR is changed. 2017-03-11 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170311 Merge with NetBSD make, pick up o main.c: only use -C arg "as is" if it starts with '/'. 2017-03-01 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170301 Merge with NetBSD make, pick up o main.c: use -C arg "as is" rather than getcwd() if they identify the same directory. o parse.c: ensure loadfile buffer is \n terminated in non-mmap case 2017-02-01 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170201 Merge with NetBSD make, pick up o var.c: allow :_=var and avoid use of special context. 2017-01-30 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170130 Merge with NetBSD make, pick up o var.c: add :range and :_ o main.c: partially initialize Dir_* before MainParseArgs() can be called. If -V, skip Main_ExportMAKEFLAGS() 2017-01-14 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20170114 Merge with NetBSD make, pick up o var.c: allow specifying the utc value used by :{gm,local}time 2016-12-12 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20161212 Merge with NetBSD make, pick up o main.c: look for obj.${MACHINE}-${MACHINE_ARCH} too. 2016-12-09 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20161209 Merge with NetBSD make, pick up o main.c: cleanup setting of .OBJDIR o parse.c: avoid coredump from (var)=val 2016-11-26 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20161126 Merge with NetBSD make, pick up o make.c: Make_OODate: report src node name if path not set 2016-09-26 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160926 Merge with NetBSD make, pick up o support for .DELETE_ON_ERROR: (remove targets that fail) 2016-09-26 Simon J. Gerraty * Makefile MAN: tweak .Dt to match ${PROG} 2016-08-18 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160818 its a neater number; pick up whitespace fixes to man page. 2016-08-17 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160817 Merge with NetBSD make, pick up o meta.c: move handling of .MAKE.META.IGNORE_* to meta_ignore() so we can call it before adding entries to missingFiles. Thus we do not track files we have been told to ignore. 2016-08-15 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160815 Merge with NetBSD make, pick up o meta_oodate: apply .MAKE.META.IGNORE_FILTER (if defined) to pathnames, and skip if the expansion is empty. Useful for dirdeps.mk when checking DIRDEPS_CACHE. 2016-08-12 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160812 Merge with NetBSD make, pick up o meta.c: remove all missingFiles entries that match a deleted dir. o main.c: set .ERROR_CMD if possible. 2016-06-06 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160606 Merge with NetBSD make, pick up o dir.c: extend mtimes cache to others via cached_stat() 2016-06-04 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160604 Merge with NetBSD make, pick up o meta.c: missing filemon data is only relevant if we read a meta file. Also do not return oodate for a missing metafile if gn->path points to .CURDIR 2016-06-02 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160602 Merge with NetBSD make, pick up o cached_realpath(): avoid hitting filesystem more than necessary. o meta.c: refactor need_meta decision, add knobs for missing meta file and filemon data wrt out-of-datedness. 2016-05-28 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160528 * boot-strap, make-bootstrap.sh.in: Makefile now uses _MAKE_VERSION 2016-05-12 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160512 Merge with NetBSD make, pick up o meta.c: ignore paths that match .MAKE.META.IGNORE_PATTERNS this is useful for gcov builds. o propagate errors from filemon(4). 2016-05-09 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160509 Merge with NetBSD make, pick up o remove use of non-standard types u_int etc. o meta.c: apply realpath() before matching against metaIgnorePaths 2016-04-04 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160404 Merge with NetBSD make, pick up o allow makefile to set .MAKE.JOBS * Makefile (PROG_NAME): use ${_MAKE_VERSION} 2016-03-15 Simon J. Gerraty * Makefile (_MAKE_VERSION): 20160315 Merge with NetBSD make, pick up o fix handling of archive members 2016-03-13 Simon J. Gerraty * Makefile (_MAKE_VERSION): rename variable to avoid interference with checks for ${MAKE_VERSION} 2016-03-10 Simon J. Gerraty * Makefile (MAKE_VERSION): 20160310 Merge with NetBSD make, pick up o meta.c: treat missing Read file same as Write, incase we Delete it. 2016-03-07 Simon J. Gerraty * Makefile (MAKE_VERSION): 20160307 Merge with NetBSD make, pick up o var.c: fix :ts\nnn to be octal by default. o meta.c: meta_finish() to cleanup memory. 2016-02-26 Simon J. Gerraty * Makefile (MAKE_VERSION): 20160226 Merge with NetBSD make, pick up o meta.c: allow meta file for makeDepend if makefiles want it. 2016-02-19 Simon J. Gerraty * var.c: default .MAKE.SAVE_DOLLARS to FALSE for backwards compatability. * Makefile (MAKE_VERSION): 20160220 Merge with NetBSD make, pick up o var.c: add knob to control handling of '$$' in := 2016-02-18 Simon J. Gerraty * Makefile (MAKE_VERSION): 20160218 Merge with NetBSD make, pick up o var.c: add .export-literal allows us to fix sys.clean-env.mk post the changes to Var_Subst. Var_Subst now takes flags, and does not consume '$$' in := 2016-02-17 Simon J. Gerraty * Makefile (MAKE_VERSION): 20160217 Merge with NetBSD make, pick up o var.c: preserve '$$' in := o parse.c: add .dinclude for handling included makefile like .depend 2015-12-20 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151220 Merge with NetBSD make, pick up o suff.c: re-initialize suffNull when clearing suffixes. 2015-12-01 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151201 Merge with NetBSD make, pick up o cond.c: CondCvtArg: avoid access beyond end of empty buffer. o meta.c: meta_oodate: use lstat(2) for checking link target in case it is a symlink. o var.c: avoid calling brk_string and Var_Export1 with empty strings. 2015-11-26 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151126 Merge with NetBSD make, pick up o parse.c: ParseTrackInput don't access beyond end of old value. 2015-10-22 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151022 * Add support for BSD/OS which lacks inttypes.h and really needs sys/param.h for sys/sysctl.h also 'type' is not a shell builtin. * var.c: eliminate uint32_t and need for inttypes.h * main.c: PrintOnError flush stdout before run .ERROR * parse.c: cope with _SC_PAGESIZE not being defined. 2015-10-20 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151020 Merge with NetBSD make, pick up o var.c: fix uninitialized var 2015-10-12 Simon J. Gerraty * var.c: the conditional expressions used with ':?' can be expensive, if already discarding do not evaluate or expand anything. 2015-10-10 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151010 Merge with NetBSD make, pick up o Add Boolean wantit flag to Var_Subst and Var_Parse when FALSE we know we are discarding the result and can skip operations like Cmd_Exec. 2015-10-09 Simon J. Gerraty * Makefile (MAKE_VERSION): 20151009 Merge with NetBSD make, pick up o var.c: don't check for NULL before free() o meta.c: meta_oodate, do not hard code ignore of makeDependfile 2015-09-10 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150910 Merge with NetBSD make, pick up o main.c: with -w print Enter/Leaving messages for objdir too if necessary. o centralize shell metachar handling * FILES: add metachar.[ch] 2015-06-06 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150606 Merge with NetBSD make, pick up o make.1: document .OBJDIR target 2015-05-05 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150505 Merge with NetBSD make, pick up o cond.c: be strict about lhs of comparison when evaluating .if but less so when called from variable expansion. o unit-tests/cond2.mk: test various error conditions 2015-05-04 Simon J. Gerraty * machine.sh (MACHINE): Add Bitrig patch from joerg@netbsd.org 2015-04-18 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150418 Merge with NetBSD make, pick up o job.c: use memmove() rather than memcpy() * unit-tests/varshell.mk: SunOS cannot handle the TERMINATED_BY_SIGNAL case, so skip it. 2015-04-11 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150411 bump version - only mk/ changes. 2015-04-10 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150410 Merge with NetBSD make, pick up o document different handling of '-' in jobs mode vs compat o fix jobs mode so that '-' only applies to whole job when shell lacks hasErrCtl o meta.c: use separate vars to track lcwd and latestdir (read) per process 2015-04-01 Simon J. Gerraty * Makefile (MAKE_VERSION): 20150401 Merge with NetBSD make, pick up o meta.c: close meta file in child * Makefile: use BINDIR.bmake if set. Same for MANDIR and SHAREDIR Handy for testing release candidates in various environments. 2015-03-26 Simon J. Gerraty * move initialization of savederr to block where it is used to avoid spurious warning from gcc5 2014-11-11 Simon J. Gerraty * Makefile (MAKE_VERSION): 20141111 just a cooler number 2014-11-05 Simon J. Gerraty * Makefile (MAKE_VERSION): 20141105 Merge with NetBSD make, pick up o revert major overhaul of suffix handling and POSIX compliance - too much breakage and impossible to make backwards compatible. o we still have the new unit test structure which is ok. o meta.c ensure "-- filemon" is at start of line. 2014-09-17 Simon J. Gerraty * configure.in: test that result of getconf PATH_MAX is numeric and discard if not. Apparently needed for Hurd. 2014-08-30 Simon J. Gerraty * Makefile (MAKE_VERSION): 20140830 Merge with NetBSD make, pick up o major overhaul of suffix handling o improved POSIX compliance o overhauled unit-tests 2014-06-20 Simon J. Gerraty * Makefile (MAKE_VERSION): 20140620 Merge with NetBSD make, pick up o var.c return varNoError rather than var_Error for ::= modifiers. 2014-05-22 Simon J. Gerraty * Makefile (MAKE_VERSION): 20140522 Merge with NetBSD make, pick up o var.c detect some parse errors. 2014-04-05 Simon J. Gerraty * Fix spelling errors - patch from Pedro Giffuni 2014-02-14 Simon J. Gerraty * Makefile (MAKE_VERSION): 20140214 Merge with NetBSD make, pick up o .INCLUDEFROM* o use Var_Value to get MAKEOBJDIR[PREFIX] o reduced realloc'ign in brk_string. * configure.in: add a check for compiler supporting __func__ 2014-01-03 Simon J. Gerraty * boot-strap: ignore mksrc=none 2014-01-02 Simon J. Gerraty * Makefile (DEFAULT_SYS_PATH?): use just ${prefix}/share/mk 2014-01-01 Simon J. Gerraty * Makefile (MAKE_VERSION): 20140101 * configure.in: set bmake_path_max to min(_SC_PATH_MAX,1024) * Makefile.config: defined BMAKE_PATH_MAX to bmake_path_max * make.h: use BMAKE_PATH_MAX if MAXPATHLEN not defined (needed for Hurd) * configure.in: Add AC_PREREQ and check for sysctl; patch from Andrew Shadura andrewsh at debian.org 2013-10-16 Simon J. Gerraty * Makefile (MAKE_VERSION): 20131010 * lose the const from arg to systcl to avoid problems on older BSDs. 2013-10-01 Simon J. Gerraty * Makefile (MAKE_VERSION): 20131001 Merge with NetBSD make, pick up o main.c: for NATIVE build sysctl to get MACHINE_ARCH from hw.machine_arch if necessary. o meta.c: meta_oodate - need to look at src of Link and target of Move as well. * main.c: check that CTL_HW and HW_MACHINE_ARCH exist. provide __arraycount() if needed. 2013-09-04 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130904 Merge with NetBSD make, pick up o Add VAR_INTERNAL context, so that internal setting of MAKEFILE does not override value set by makefiles. 2013-09-02 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130902 Merge with NetBSD make, pick up o CompatRunCommand: only apply shellErrFlag when errCheck is true 2013-08-28 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130828 Merge with NetBSD make, pick up o Fix VAR :sh = syntax from Will Andrews at freebsd.org o Call Job_SetPrefix() from Job_Init() so makefiles have opportunity to set .MAKE.JOB.PREFIX 2013-07-30 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130730 Merge with NetBSD make, pick up o Allow suppression of --- job -- tokens by setting .MAKE.JOB.PREFIX empty. 2013-07-16 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130716 Merge with NetBSD make, pick up o number of gmake compatibility tweaks -w for gmake style entering/leaving messages if .MAKE.LEVEL > 0 indicate it in progname "make[1]" etc. handle MAKEFLAGS containing only letters. o when overriding a GLOBAL variable on the command line, delete it from GLOBAL context so -V doesn't show the wrong value. 2013-07-06 Simon J. Gerraty * configure.in: We don't need MAKE_LEVEL_SAFE anymore. * Makefile (MAKE_VERSION): 20130706 Merge with NetBSD make, pick up o Shell_Init(): export shellErrFlag if commandShell hasErrCtl is true so that CompatRunCommand() can use it, to ensure consistent behavior with jobs mode. o use MAKE_LEVEL_ENV to define the variable to propagate .MAKE.LEVEL - currently set to MAKELEVEL (same as gmake). o meta.c: use .MAKE.META.IGNORE_PATHS to allow customization of paths to ignore. 2013-06-04 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130604 Merge with NetBSD make, pick up o job.c: JobCreatePipe: do fcntl() after any tweaking of fd's to avoid leaking descriptors. 2013-05-28 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130528 Merge with NetBSD make, pick up o var.c: cleanup some left-overs in VarHash() 2013-05-20 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130520 generate manifest from component FILES rather than have to update FILES when mk/FILES changes. 2013-05-18 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130518 Merge with NetBSD make, pick up o suff.c: don't skip all processsing for .PHONY targets else wildcard srcs do not get expanded. o var.c: expand name of variable to delete if necessary. 2013-03-30 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130330 Merge with NetBSD make, pick up o meta.c: refine the handling of .OODATE in commands. Rather than suppress command comparison for the entire script as though .NOMETA_CMP had been used, only suppress it for the one command line. This allows something like ${.OODATE:M.NOMETA_CMP} to be used to suppress comparison of a command without otherwise affecting it. o make.1: document that 2013-03-22 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130321 yes, not quite right but its a cooler number. Merge with NetBSD make, pick up o parse.c: fix ParseGmakeExport to be portable and add a unit-test. * meta.c: call meta_init() before makefiles are read and if built with filemon support set .MAKE.PATH_FILEMON to _PATH_FILEMON this let's makefiles test for support. Call meta_mode_init() to process .MAKE.MODE. 2013-03-13 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130305 Merge with NetBSD make, pick up o run .STALE: target when a dependency from .depend is missing. o job.c: add Job_RunTarget() for the above and .BEGIN 2013-03-03 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130303 Merge with NetBSD make, pick up o main.c: set .MAKE.OS to utsname.sysname o job.c: more checks for read and poll errors o var.c: lose VarChangeCase() saves 4% time 2013-03-02 Simon J. Gerraty * boot-strap: remove MAKEOBJDIRPREFIX from environment since we want to use MAKEOBJDIR 2013-01-27 Simon J. Gerraty * Merge with NetBSD make, pick up o make.1: more info on how shell commands are handled. o job.c,main.c: detect write errors to job pipes. 2013-01-25 Simon J. Gerraty * Makefile (MAKE_VERSION): 20130123 Merge with NetBSD make, pick up o meta.c: if script uses .OODATE and meta_oodate() decides rebuild is needed, .OODATE will be empty - set it to .ALLSRC. o var.c: in debug output indicate which variabale modifiers apply to. o remove Check_Cwd logic the makefiles have been fixed. 2012-12-12 Simon J. Gerraty * makefile.in: add a simple makefile for folk who insist on ./configure; make; make install it just runs boot-strap * include mk/* to accommodate the above * boot-strap: re-work to accommodate the above mksrc defaults to $Mydir/mk allow op={configure,build,install,clean,all} add options to facilitate install * Makefile.config.in: just the bits set by configure * Makefile: bump version to 20121212 abandon Makefile.in (NetBSD Makefile) leverage mk/* instead * configure.in: ensure srcdir is absolute 2012-11-11 Simon J. Gerraty * Makefile.in (MAKE_VERSION): 20121111 fix generation of bmake.cat1 2012-11-09 Simon J. Gerraty * Makefile.in (MAKE_VERSION): 20121109 Merge with NetBSD make, pick up o make.c: MakeBuildChild: return 0 so search continues if a .ORDER dependency is detected. o unit-tests/order: test the above 2012-11-02 Simon J. Gerraty * Makefile.in (MAKE_VERSION): 20121102 Merge with NetBSD make, pick up o cond.c: allow cond_state[] to grow. In meta mode with a very large tree, we can hit the limit while processing dirdeps. 2012-10-25 Simon J. Gerraty * Makefile.in: we need to use ${srcdir} not ${.CURDIR} 2012-10-10 Simon J. Gerraty * Makefile.in (MAKE_VERSION): 20121010 o protect syntax that only bmake parses correctly. o remove auto setting of FORCE_MACHINE, use configure's --with-force-machine=whatever if that is desired. 2012-10-08 Simon J. Gerraty * Makefile.in: do not lose history from make.1 when generating bmake.1 2012-10-07 Simon J. Gerraty * Makefile.in (MAKE_VERSION): 20121007 Merge with NetBSD make, pick up o compat.c: ignore empty commands - same as jobs mode. o make.1: document meta chars that cause use of shell 2012-09-11 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120911 * bsd.after-import.mk: include Makefile.inc early and allow it to override PROG 2012-08-31 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120831 Merge with NetBSD make, pick up o cast sizeof() to int for comparison o minor make.1 tweak 2012-08-30 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120830 Merge with NetBSD make, pick up o .MAKE.EXPAND_VARIABLES knob can control default behavior of -V o debug flag -dV causes -V to show raw value regardless. 2012-07-05 Simon J. Gerraty * bsd.after-import.mk (after-import): ensure unit-tests/Makefile gets SRCTOP set. 2012-07-04 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120704 Merge with NetBSD make, pick up o Job_ParseShell should call Shell_Init if it has been previously called. * Makefile.in: set USE_META based on configure result. also .PARSEDIR is safer indicator of bmake. 2012-06-26 Simon J. Gerraty * Makefile.in: bump version to 20120626 ensure CPPFLAGS is in CFLAGS * meta.c: avoid nested externs * bsd.after-import.mk: avoid ${.CURDIR}/Makefile as target 2012-06-20 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120620 Merge with NetBSD make, pick up o make_malloc.c: avoid including make_malloc.h again * Makefile.in: avoid bmake only syntax or protect with .if defined(.MAKE.LEVEL) * bsd.after-import.mk: replace .-include with .sinclude ensure? SRCTOP gets a value * configure.in: look for filemon.h in /usr/include/dev/filemon first. 2012-06-19 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120612 Merge with NetBSD make, pick up o use MAKE_ATTR_* rather than those defined by cdefs.h or compiler for greater portability. o unit-tests/forloop: check that .for works as expected wrt number of times and with "quoted strings". 2012-06-06 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120606 Merge with NetBSD make, pick up o compat.c: use kill(2) rather than raise(3). * configure.in: look for sys/dev/filemon * bsd.after-import.mk: add a .-include "Makefile.inc" to Makefile and pass BOOTSTRAP_XTRAS to boot-strap. 2012-06-04 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120604 Merge with NetBSD make, pick up o util.c and var.c share same var for tracking if environ has been reallocated. o util.c provide getenv with setenv. * Add MAKE_LEVEL_SAFE as an alternate means of passing MAKE_LEVEL when the shell actively strips .MAKE.* from the environment. We still refer to the variable always as .MAKE.LEVEL * util.c fix bug in findenv() was finding prefix of name. * compat.c: re-raising SIGINT etc after running .INTERRUPT results in more reliable termination of all activity on many platforms. 2012-06-02 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120602 Merge with NetBSD make, pick up o for.c: handle quoted items in .for list 2012-05-30 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120530 Merge with NetBSD make, pick up o compat.c: ignore empty command. 2012-05-24 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120524 * FILES: add bsd.after-import.mk: A simple means of integrating bmake into a BSD build system. 2012-05-20 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120520 Merge with NetBSD make, pick up o increased limit for nested conditionals. 2012-05-18 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120518 Merge with NetBSD make, pick up o use _exit(2) in signal hanlder o Don't use the [dir] cache when building nodes that might have changed since the last exec. o Avoid nested extern declaration warnings. 2012-04-27 Simon J. Gerraty * meta.c (fgetLine): avoid %z - not portable. * parse.c: Since we moved include of sys/mman.h and def's of MAP_COPY etc. we got dups from a merge. 2012-04-24 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120420 Merge with NetBSD make, pick up o restore duplicate supression in .MAKE.MAKEFILES runtime saving can be significant. o Var_Subst() uses Buf_DestroyCompact() to reduce memory consumption up to 20%. 2012-04-20 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120420 Merge with NetBSD make, pick up o remove duplicate supression in .MAKE.MAKEFILES o improved dir cache behavior o gmake'ish export command 2012-03-25 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20120325 Merge with NetBSD make, pick up o fix parsing of :[#] in conditionals. 2012-02-10 Simon J. Gerraty * Makefile.in: replace use of .Nx in bmake.1 with NetBSD since some systems cannot cope with .Nx 2011-11-14 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20111111 Merge with NetBSD make, pick up o debug output for .PARSEDIR and .PARSEFILE 2011-10-10 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20111010 2011-10-09 Simon J. Gerraty * boot-strap: check for an expected file in the dirs we look for. * make-bootstrap.sh: pass on LDSTATIC 2011-10-01 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20111001 Merge with NetBSD make, pick up o ensure .PREFIX is set for .PHONY and .TARGET set for .PHONY run via .END o __dead used consistently 2011-09-10 Simon J. Gerraty * Makefile.in (MAKE_VERSION): 20110909 is a better number ;-) 2011-09-05 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110905 Merge with NetBSD make, pick up o meta_oodate: ignore makeDependfile 2011-08-28 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110828 Merge with NetBSD make, pick up o silent=yes in .MAKE.MODE causes meta mode to mark targets as SILENT if a .meta file is created 2011-08-18 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110818 Merge with NetBSD make, pick up o in meta mode, if target flagged .META a missing .meta file means target is out-of-date o fixes for gcc 4.5 warnings o simplify job printing code 2011-08-09 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110808 Merge with NetBSD make, pick up o do not touch OP_SPECIAL targets when doing make -t 2011-06-22 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110622 Merge with NetBSD make, pick up o meta_oodate detect corrupted .meta file and declare oodate. * configure.in: add check for setsid 2011-06-07 Simon J. Gerraty * Merge with NetBSD make, pick up o unit-tests/modts now works on MirBSD 2011-06-04 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110606 Merge with NetBSD make, pick up o ApplyModifiers: when we parse a variable which is not the entire modifier string, or not followed by ':', do not consider it as containing modifiers. o loadfile: ensure newline at end of mapped file. 2011-05-05 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110505 Merge with NetBSD make, pick up o .MAKE.META.BAILIWICK - list of prefixes which define the scope of make's control. In meta mode, any generated file within said bailiwick, which is found to be missing, causes current target to be out-of-date. 2011-04-11 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110411 Merge with NetBSD make, pick up o when long modifiers fail to match, check sysV style. - add a test case 2011-04-10 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110410 Merge with NetBSD make, pick up o :hash - cheap 32bit hash of value o :localtime, :gmtime - use value as format string for strftime. 2011-03-30 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110330 mostly because its a cooler version. Merge with NetBSD make, pick up o NetBSD tags for meta.[ch] o job.c call meta_job_finish() after meta_job_error(). o meta_job_error() should call meta_job_finish() to ensure .meta file is closed, and safe to copy - if .ERROR target wants. meta_job_finish() is safe to call repeatedly. 2011-03-29 Simon J. Gerraty * unit-tests/modts: use printf if it is a builtin, to save us from MirBSD * Makefile.in (MAKE_VERSION): bump version to 20110329 Merge with NetBSD make, pick up o fix for use after free() in CondDoExists(). o meta_oodate() report extra commands and return earlier. 2011-03-27 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110327 Merge with NetBSD make, pick up o meta.c, if .MAKE.MODE contains curdirOk=yes allow creating .meta files in .CURDIR * boot-strap (TOOL_DIFF): aparently at least on linux distro formats the output of 'type' differently - so eat any "()" 2011-03-06 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110306 Merge with NetBSD make, pick up o meta.c, only do getcwd() once 2011-03-05 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110305 Merge with NetBSD make, pick up o correct sysV substitution handling of empty lhs and variable o correct exists() check for dir with trailing / o correct handling of modifiers for non-existant variables during evaluation of conditionals. o ensure MAP_FILE is defined. o meta.c use curdir[] now exported by main.c 2011-02-25 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110225 Merge with NetBSD make, pick up o fix for incorrect .PARSEDIR when .OBJDIR is re-computed after makefiles have been read. o fix example of :? modifier in man page. 2011-02-13 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110214 Merge with NetBSD make, pick up o meta.c handle realpath() failing when generating meta file name. * sigcompat.c: convert to ansi so we can use higher warning levels. 2011-02-07 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110207 Merge with NetBSD make, pick up o fix for bug in meta mode. 2011-01-03 Simon J. Gerraty * parse.c: SunOS 5.8 at least does not have MAP_FILE 2011-01-01 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20110101 Merge with NetBSD make, pick up o use mmap(2) if available, for reading makefiles 2010-12-15 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20101215 Merge with NetBSD make, pick up o ensure meta_job_error() does not report a previous .meta file as being culprit. 2010-12-10 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20101210 Merge with NetBSD make, pick up o meta_oodate: track cwd per process, and only consider target out-of-date if missing file is outside make's CWD. Ignore files in /tmp/ etc. o to ensure unit-tests results match, need to control LC_ALL as well as LANG. o fix for parsing bug in var.c 2010-11-26 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20101126 Merge with NetBSD make, pick up o if stale dependency is an IMPSRC, search via .PATH o meta_oodate: if a referenced file is missing, target is out-of-date. o meta_oodate: if a target uses .OODATE in its commands, it (.OODATE) needs to be recomputed. o keep a pointer to youngest child node, rather than just its mtime. 2010-11-02 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20101101 2010-10-16 Simon J. Gerraty * machine.sh: like os.sh, allow for uname -p producing useless drivel 2010-09-13 Simon J. Gerraty * boot-strap: document configure knobs for meta and filemon. * Makefile.in (MAKE_VERSION): bump version to 20100911 Merge with NetBSD make, pick up o meta.c - meta mode * make-bootstrap.sh.in: handle meta.c * configure.in: add knobs for use_meta and filemon_h also, look for dirname, str[e]sep and strlcpy * util.c: add simple err[x] and warn[x] 2010-08-08 Simon J. Gerraty * boot-strap (TOOL_DIFF): set this to ensure tests use the same version of diff that configure tested * Makefile.in (MAKE_VERSION): bump version to 20100808 Merge with NetBSD make, pick up o in jobs mode, when we discover we cannot make something, call PrintOnError before exit. 2010-08-06 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100806 Merge with NetBSD make, pick up o formatting fixes for ignored errors o ensure jobs are cleaned up regardless of where wait() was called. 2010-06-28 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100618 * os.sh (MACHINE_ARCH): watch out for drivel from uname -p 2010-06-16 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100616 Merge with NetBSD make, pick up o man page update o call PrintOnError from JobFinish when we detect an error we are not ignoring. 2010-06-06 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100606 Merge with NetBSD make, pick up o man page update 2010-06-05 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100605 Merge with NetBSD make, pick up o use bmake_signal() which is a wrapper around sigaction() in place of signal() o add .export-env to allow exporting variables to environment without tracking (so no re-export when the internal value is changed). 2010-05-24 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100524 Merge with NetBSD make, pick up o fix for .info et al being greedy. 2010-05-23 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100520 Merge with NetBSD make, pick up o back to using realpath on argv[0] but only if contains '/' and does not start with '/'. 2010-05-10 Simon J. Gerraty * boot-strap: use absolute path for bmake when running tests. * Makefile.in (MAKE_VERSION): bump version to 20100510 Merge with NetBSD make, pick up o revert use of realpath on argv[0] too many corner cases. o print MAKE_PRINT_VAR_ON_ERROR before running .ERROR target. 2010-05-05 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100505 Merge with NetBSD make, pick up o fix for missed SIGCHLD when compiled with SunPRO actually for bmake, defining FORCE_POSIX_SIGNALS would have done the job. 2010-04-30 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100430 Merge with NetBSD make, pick up o fflush stdout before writing to stdout 2010-04-23 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100423 Merge with NetBSD make, pick up o updated unit tests for Haiku (this time for sure). * boot-strap: based on patch from joerg honor --with-default-sys-path better. * boot-strap: remove mention of --with-prefix-sys-path 2010-04-22 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100422 * Merge with NetBSD make, pick up o fix for vfork() on Darwin. o fix for bogus $TMPDIR. o set .MAKE.MODE=compat for -B o set .MAKE.JOBS=max_jobs for -j max_jobs o allow unit-tests to run without any *.mk o unit-tests/modmisc be more conservative in dirs presumed to exist. * boot-strap: ignore /usr/share/mk except on NetBSD. * unit-tests/Makefile.in: set LANG=C when running unit-tests to ensure sort(1) behaves as expected. 2010-04-21 Simon J. Gerraty * boot-strap: add FindHereOrAbove so we can use -m .../mk 2010-04-20 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100420 * Merge with NetBSD make, pick up o fix for variable realpath() behavior. we have to stat(2) the result to be sure. o fix for .export (all) when nested vars use :sh 2010-04-14 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100414 * Merge with NetBSD make, pick up o use realpath to resolve argv[0] (for .MAKE) if needed. o add realpath from libc. o add :tA to resolve variable via realpath(3) if possible. 2010-04-08 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100408 * Merge with NetBSD make, pick up o unit tests for .ERROR, .error o fix for .ERROR to ensure it cannot be default target. 2010-04-06 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100406 * Merge with NetBSD make, pick up o fix for compat mode "Error code" going to debug_file. o fix for .ALLSRC being populated twice. o support for .info, .warning and .error directives o .MAKE.MODE to control make's operational mode o .MAKE.MAKEFILE_PREFERENCE to control the preferred makefile name(s). o .MAKE.DEPENDFILE to control the name of the depend file o .ERROR target - run on failure. 2010-03-18 Simon J. Gerraty * make-bootstrap.sh.in: extract MAKE_VERSION from Makefile * os.sh,arch.c: patch for Haiku from joerg at netbsd 2010-03-17 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100222 * Merge with NetBSD make, pick up o better error msg for .for with mutiple inter vars * boot-strap: o use make-bootstrap.sh from joerg at netbsd to avoid the need for a native make when bootstrapping. o add "" everywhere ;-) o if /usr/share/tmac/andoc.tmac exists install nroff bmake.1 otherwise the pre-formated version. 2010-01-04 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20100102 * Merge with NetBSD make, pick up: o fix for -m .../ 2009-11-18 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20091118 * Merge with NetBSD make, pick up: o .unexport o report lines that start with '.' and should have ':' (catch typo's of .el*if). 2009-10-30 Simon J. Gerraty * configure.in: Ensure that srcdir and mksrc are absolute paths. 2009-10-09 Simon J. Gerraty * Makefile.in (MAKE_VERSION): fix version to 20091007 2009-10-07 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 200910007 * Merge with NetBSD make, pick up: o fix for parsing of :S;...;...; applied to .for loop iterator appearing in a dependency line. 2009-09-09 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20090909 * Merge with NetBSD make, pick up: o fix for -C, .CURDIR and .OBJDIR * boot-strap: o allow share_dir to be set independent of prefix. o select default share_dir better when prefix ends in $HOST_TARGET o if FORCE_BSD_MK etc were set, include them in the suggested install-mk command. 2009-09-08 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20090908 * Merge with NetBSD make, pick up: o .MAKE.LEVEL for recursion tracking o fix for :M scanning \: 2009-09-03 Simon J. Gerraty * configure.in: Don't -D__EXTENSIONS__ if AC_USE_SYSTEM_EXTENSIONS says "no". 2009-08-26 Simon J. Gerraty * Makefile.in (MAKE_VERSION): bump version to 20090826 Simplify MAKE_VERSION to just the bare date. * Merge with NetBSD make, pick up: o -C directory support. o support for SIGINFO o use $TMPDIR for temp files. o child of vfork should be careful about modifying parent's state. 2009-03-26 Simon J. Gerraty * Appy some patches for MiNT from David Brownlee 2009-02-26 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20090222 * Merge with NetBSD make, pick up: o Possible null pointer de-ref in Var_Set. 2009-02-08 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20090204 * Merge with NetBSD make, pick up: o bmake_malloc et al moved to their own .c o Count both () and {} when looking for the end of a :M pattern o Change 'Buffer' so that it is the actual struct, not a pointer to it. o strlist.c - functions for processing extendable arrays of pointers to strings. o ClientData replaced with void *, so const void * can be used. o New debug flag C for DEBUG_CWD 2008-11-11 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20081111 Apply patch from Joerg Sonnenberge to configure.in: o remove some redundant checks o check for emlloc etc only in libutil and require the whole family. util.c: o remove [v]asprintf which is no longer used. 2008-11-04 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20081101 * Merge with NetBSD make, pick up: o util.c: avoid use of putenv() - christos 2008-10-30 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20081030 pick up man page tweaks. 2008-10-29 Simon J. Gerraty * Makefile.in: move processing of LIBOBJS to after is definition! thus we'll have getenv.c in SRCS only if needed. * make.1: add examples of how to use :? * Makefile.in (BMAKE_VERSION): bump version to 20081029 * Merge with NetBSD make, pick up: o fix for .END processing with -j o segfault from Parse_Error when no makefile is open o handle numeric expressions in any variable expansion o debug output now defaults to stderr, -dF to change it - apb o make now uses bmake_malloc etc so that it can build natively on A/UX - wasn't an issue for bmake, but we want to keep in sync. 2008-09-27 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20080808 * Merge with NetBSD make, pick up: o fix for PR/38840: Pierre Pronchery: make crashes while parsing long lines in Makefiles o optimizations for VarQuote by joerg o fix for PR/38756: dominik: make dumps core on invalid makefile 2008-05-15 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20080515 * Merge with NetBSD make, pick up: o fix skip setting vars in VAR_GLOBAL context, to handle cases where VAR_CMD is used for other than command line vars. 2008-05-14 Simon J. Gerraty * boot-strap (make_version): we may need to look in $prefix/share/mk for sys.mk * Makefile.in (BMAKE_VERSION): bump version to 20080514 * Merge with NetBSD make, pick up: o skip setting vars in VAR_GLOBAL context, when already set in VAR_CMD which takes precedence. 2008-03-30 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20080330 * Merge with NetBSD make, pick up: o fix for ?= when LHS contains variable reference. 2008-02-15 Simon J. Gerraty * merge some patches from NetBSD pkgsrc. * makefile.boot.in (BOOTSTRAP_SYS_PATH): Allow better control of the MAKSYSPATH used during bootstrap. * Makefile.in (BMAKE_VERSION): bump version to 20080215 * Merge with NetBSD make, pick up: o warn if non-space chars follow 'empty' in a conditional. 2008-01-18 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20080118 * Merge with NetBSD make, pick up: o consider dependencies read from .depend as optional - dsl o remember when buffer for reading makefile grows - dsl o add -dl (aka LOUD) - David O'Brien 2007-10-22 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20071022 * Merge with NetBSD make, pick up: o Allow .PATH to be used for .include "" * boot-strap: source default settings from .bmake-boot-strap.rc 2007-10-16 Simon J. Gerraty * Makefile.in: fix maninstall on various systems provided that our man.mk is used. For non-BSD systems we install the preformatted page into $MANDIR/cat1 2007-10-15 Simon J. Gerraty * boot-strap: make bmake.1 too, so maninstall works. 2007-10-14 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20071014 * Merge with NetBSD make, pick up: o revamped handling of defshell - configure no longer needs to know the content of the shells array - apb o stop Var_Subst modifying its input - apb o avoid calling ParseTrackInput too often - dsl 2007-10-11 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20071011 * Merge with NetBSD make, pick up: o fix Shell_Init for case that _BASENAME_DEFSHELL is absolute path. * sigcompat.c: some tweaks for HP-UX 11.x based on patch from Tobias Nygren * configure.in: update handling of --with-defshell to match new make behavior. --with-defshell=/usr/xpg4/bin/sh will now do what one might hope - provided the chosen shell behaves enough like sh. 2007-10-08 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20071008 * Merge with NetBSD make, pick up: o .MAKE.JOB.PREFIX - control the token output before jobs - sjg o .export/.MAKE.EXPORTED - export of variables - sjg o .MAKE.MAKEFILES - track all makefiles read - sjg o performance improvements - dsl o revamp parallel job scheduling - dsl 2006-07-28 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20060728 * Merge with NetBSD make, pick up: o extra debug info during variable and cond processing - sjg o shell definition now covers newline - rillig o minor mem leak in PrintOnError - sjg 2006-05-11 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20060511 * Merge with NetBSD make, pick up: o more memory leaks - coverity o possible overflow in ArchFindMember - coverity o extract variable modifier code out of Var_Parse() so it can be called recursively - sjg o unit-tests/moderrs - sjg 2006-04-12 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20060412 * Merge with NetBSD make, pick up: o fixes for some memory leaks - coverity o only read first sys.mk etc when searching sysIncPath - sjg * main.c (ReadMakefile): remove hack for __INTERIX that prevented setting ${MAKEFILE} - OBATA Akio 2006-03-18 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20060318 * Merge with NetBSD make, pick up: o cleanup of job.c to remove remote handling, distcc is more useful and this code was likely bit-rotting - dsl o fix for :P modifier - sjg * boot-strap: set default prefix to something reasonable (for me anyway). 2006-03-01 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20060301 * Merge with NetBSD make, pick up: o make .WAIT apply recursively, document and test case - apb o allow variable modifiers in a variable appear anywhere in modifier list, document and test case - sjg 2006-02-22 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20060222 * Merge with NetBSD make, pick up: o improved job token handling - dsl o SIG_DFL the correct signal before exec - dsl o more debug info during parsing - dsl o allow variable modifiers to be specified via variable - sjg * boot-strap: explain why we died if no mksrc 2005-11-05 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20051105 * configure.in: always set default_sys_path default is ${prefix}/share/mk - remove prefix_sys_path, anyone wanting more than above needs to set it manually. 2005-11-04 Simon J. Gerraty * boot-strap: make this a bit easier for pkgsrc folk. bootstrap still fails on IRIX64 since MACHINE_ARCH gets set to 'mips' while pkgsrc wants 'mipseb' or 'mipsel' 2005-11-02 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20051102 * job.c (JobFinish): fix likely ancient merge lossage fix from Todd Vierling. * boot-strap (srcdir): allow setting mksrc=none 2005-10-31 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20051031 * ranlib.h: skip on OSF too. (NetBSD PR 31864) 2005-10-10 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20051002 fix a silly typo 2005-10-09 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20051001 support for UnixWare and some other systems, based on patches from pkgsrc/bootstrap 2005-09-03 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20050901 * Merge with NetBSD make, pick up: o possible parse error causing us to wander off. 2005-06-06 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20050606 * Merge with NetBSD make, pick up: o :0x modifier for randomizing a list o fixes for a number of -Wuninitialized issues. 2005-05-30 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20050530 * Merge with NetBSD make, pick up: o Handle dependencies for .BEGIN, .END and .INTERRUPT * README: was seriously out of date. 2005-03-22 Simon J. Gerraty * Important to use .MAKE rather than MAKE. 2005-03-15 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20050315 * Merge with NetBSD make, pick up: o don't mistake .elsefoo for .else o use suffix-specific search path correctly o bunch of style nits 2004-05-11 Simon J. Gerraty * boot-strap: o ensure that args to --src and --with-mksrc are resolved before giving them to configure. o add -o "objdir" so that builder can control it, default is $OS as determined by os.sh o add -q to suppress all the install instructions. 2004-05-08 Simon J. Gerraty * Remove __IDSTRING() * Makefile.in (BMAKE_VERSION): bump to 20040508 * Merge with NetBSD make, pick up: o posix fixes - remove '-e' from compat mode - add support for '+' command-line prefix. o fix for handling '--' on command-line. o fix include in lst.lib/lstInt.h to simplify '-I's o we also picked up replacement of MAKE_BOOTSTRAP with !MAKE_NATIVE which is a noop, but possibly confusing. 2004-04-14 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20040414 * Merge with NetBSD make, pick up: o allow quoted strings on lhs of conditionals o issue warning when extra .else is seen o print line numer when errors encountered during parsing from string. 2004-02-20 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20040220 * Merge with NetBSD make, pick up: o fix for old :M parsing bug. o re-jigged unit-tests 2004-02-15 Simon J. Gerraty * Makefile.in (accept test): use ${.MAKE:S,^./,${.CURDIR}/,} so that './bmake -f Makefile test' works. 2004-02-14 Simon J. Gerraty * Makefile.in: (BMAKE_VERSION): bump to 20040214 * Merge with NetBSD make, pick up: o search upwards for *.mk o fix for double free of var substitution buffers o use of getopt replaced with custom code, since the usage (re-scanning) isn't posix compatible. 2004-02-12 Simon J. Gerraty * arch.c: don't include ranlib.h on ELF systems (thanks to Chuck Cranor ). 2004-01-18 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump to 20040118 * boot-strap (while): export vars we assign to on cmdline * unit-test/Makefile.in: ternary is .PHONY 2004-01-08 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20040108 * Merge with NetBSD make, pick up: o fix for ternary modifier 2004-01-06 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20040105 * Merge with NetBSD make, pick up: o fix for cond.c to handle compound expressions better o variable expansion within sysV style replacements 2003-12-22 Simon J. Gerraty * Make portable snprintf safer - output to /dev/null first to check space needed. * Makefile.in (BMAKE_VERSION): bump version to 20031222 * Merge with NetBSD make, pick up: o -dg3 to show input graph when things go wrong. o explicitly look for makefiles in objdir if not found in curdir so that errors in .depend etc will be reported accurarely. o avoid use of -e in shell scripts in jobs mode, use '|| exit $?' instead as it more accurately reflects the expected behavior and is more consistently implemented. o avoid use of asprintf. 2003-09-28 Simon J. Gerraty * util.c: Add asprintf and vasprintf. * Makefile.in (BMAKE_VERSION): bump version to 20030928 * Merge with NetBSD make, pick up: :[] modifier - allows picking words from a variable. :tW modifier - allows treating value as one big word. W flag for :C and :S - allows treating value as one big word. 2003-09-12 Simon J. Gerraty * Merge with NetBSD make pick up -de flag to enable printing failed command. don't skip 1st two dir entries (normally . and ..) since coda does not have them. 2003-09-09 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20030909 * Merge with NetBSD make, pick up: - changes for -V '${VAR}' to print fully expanded value cf. -V VAR - CompatRunCommand now prints the command that failed. - several files got updated 3 clause Berkeley license. 2003-08-02 Simon J. Gerraty * boot-strap: Allow setting configure args on command line. 2003-07-31 Simon J. Gerraty * configure.in: add --with-defshell to allow sh or ksh to be selected as default shell. * Makefile.in: bump version to 20030731 * Merge with NetBSD make Pick up .SHELL spec for ksh and associate man page changes. Also compat mode now uses the same shell specs. 2003-07-29 Simon J. Gerraty * var.c (Var_Parse): ensure delim is initialized. * unit-tests/Makefile.in: use single quotes to avoid problems from some shells. * makefile.boot.in: Run the unit-tests as part of the bootstrap procedure. 2003-07-28 Simon J. Gerraty * unit-tests/Makefile.in: always force complaints from ${TEST_MAKE} to be from 'make'. * configure.in: add check for 'diff -u' also fix some old autoconf'isms * Makefile.in (BMAKE_VERSION): bump version to 20030728. if using GCC add -Wno-cast-qual to CFLAGS for var.o * Merge with NetBSD make Pick up fix for :ts parsing error in some cases. Pick unit-tests. 2003-07-23 Simon J. Gerraty * Makefile.in (BMAKE_VERSION): bump version to 20030723. * var.c (Var_Parse): fix bug in :ts modifier, after const correctness fixes, must pass nstr to VarModify. 2003-07-14 Simon J. Gerraty * Makefile.in: BMAKE_VERSION switch to a date based version. We'll generally use the date of last import from NetBSD. * Merge with NetBSD make Pick up fixes for const-correctness, now passes WARNS=3 on NetBSD. Pick up :ts modifier, allows controlling the separator used between words in variable expansion. 2003-07-11 Simon J. Gerraty * FILES: include boot-strap and os.sh * Makefile.in: only set WARNS if we are NetBSD, the effect on FreeBSD is known to be bad. * makefile.boot.in (bootstrap): make this the default target. * Makefile.in: bump version to 3.1.19 * machine.sh: avoid A-Z with tr as it is bound to lose. 2003-07-10 Simon J. Gerraty * Merge with NetBSD make Pick up fix for PR/19781 - unhelpful error msg on unclosed ${var:foo Plus some doc fixes. 2003-04-27 Simon J. Gerraty * Merge with NetBSD make Pick up fix for PR/1523 - don't count a library as built, if there is no way to build it * Bump version to 3.1.18 2003-03-23 Simon J. Gerraty * Merge with NetBSD make Pick up fix for ParseDoSpecialSrc - we only use it if .WAIT appears in src list. 2003-03-21 Simon J. Gerraty * Merge with NetBSD make (mmm 10th anniversary!) pick up fix for .WAIT in srcs that refer to $@ or $* (PR#20828) pick up -X which tells us to not export VAR=val via setenv if we are already doing so via MAKEFLAGS. This saves valuable env space on systems like Darwin. set MAKE_VERSION to 3.1.17 * parse.c: pix up fix for suffix rules 2003-03-06 Simon J. Gerraty * Merge with NetBSD make. pick up fix for propagating -B via MAKEFLAGS. set MAKE_VERSION to 3.1.16 * Apply some patches from pkgsrc-bootstrap/bmake Originally by Grant Beattie I may have missed some - since they are based on bmake-3.1.12 2002-12-03 Simon J. Gerraty * makefile.boot.in (bmake): update install targets for those that use them, also clear MAKEFLAGS when invoking bmake.boot to avoid havoc from gmake -w. Thanks to Harlan Stenn . * bmake.cat1: update the pre-formatted man page! 2002-11-30 Simon J. Gerraty * Merge with NetBSD make. pick up fix for premature free of pointer used in call to Dir_InitCur(). set MAKE_VERSION to 3.1.15 2002-11-26 Simon J. Gerraty * configure.in: determine suitable value for MKSRC. override using --with-mksrc=PATH. * machine.sh: use `uname -p` for MACHINE_ARCH on modern SunOS systems. configs(8) will use 'sun4' as an alias for 'sparc'. 2002-11-25 Simon J. Gerraty * Merge with NetBSD make. pick up ${.PATH} pick up fix for finding ../cat.c via .PATH when .CURDIR=.. set MAKE_VERSION to 3.1.14 add configure checks for killpg and sys/socket.h 2002-09-16 Simon J. Gerraty * tag bmake-3-1-13 * makefile.boot.in (bmake): use install-mk Also setup ./mk before trying to invoke bmake.boot incase we needed install-mk to create a sys.mk for us. * configure.in: If we need to add -I${srcdir}/missing, make it an absolute path so that it works for lst.lib too. * make.h: always include sys/cdefs.h since we provide one if the host does not. * Makefile.in (install-mk): use MKSRC/install-mk which will do the right thing. use uname -p for ARCH if possible. since install-mk will setup links bsd.prog.mk -> prog.mk if needed, just .include bsd.prog.mk * Merge with NetBSD make (NetBSD-1.6) Code is ansi-C only now. Bug in handling of dotLast is fixed. Can now assign .OBJDIR and make will reset its notions of life. New modifiers :tu :tl for toUpper and toLower. Tue Oct 16 12:18:42 2001 Simon J. Gerraty * Merge with NetBSD make pick up fix for .END failure in compat mode. pick up fix for extra va_end() in ParseVErrorInternal. Thu Oct 11 13:20:06 2001 Simon J. Gerraty * configure.in: for systems that have sys/cdefs.h check if it is compatible. If not, include the one under missing, but tell it to include the native one too - necessary on Linux. * missing/sys/cdefs.h: if NEED_HOST_CDEFS_H is defined, use include_next (for gcc) to get the native sys/cdefs.h Tue Aug 21 02:29:34 2001 Simon J. Gerraty * job.c (JobFinish): Fix an earlier merge bug that resulted in leaking descriptors when using -jN. * job.c (JobPrintCommand): See if "curdir" exists before attempting to chdir(). Doing the chdir directly in make (when in compat mode) fails silently, so let the -jN version do the same. This can happen when building kernels in an object tree and playing clever games to reset .CURDIR. * Merged with NetBSD make pick up .USEBEFORE Tue Jun 26 23:45:11 2001 Simon J. Gerraty * makefile.boot.in: Give bmake.boot a MAKESYSPATH that might work. Tue Jun 12 16:48:57 2001 Simon J. Gerraty * var.c (Var_Set): Add 4th (flags) arg so VarLoopExpand can tell us not to export the iterator variable when using VAR_CMD context. Sun Jun 10 21:55:21 2001 Simon J. Gerraty * job.c (Job_CatchChildren): don't call Job_CatchOutput() here, its the wrong "fix". Sat Jun 9 00:11:24 2001 Simon J. Gerraty * Redesigned export of VAR_CMD's via MAKEFLAGS. We now simply append the variable names to .MAKEOVERRIDES, and handle duplicate suppression and quoting in ExportMAKEFLAGS using: ${.MAKEOVERRIDES:O:u:@v@$v=${$v:Q}@} Apart from fixing quoting bugs in previous version, this allows us to export vars to the environment by simply doing: .MAKEOVERRIDES+= PATH Merged again with NetBSD make, but the above is the only change. * configure.in: added --disable-pwd-override disable $PWD overriding getcwd() --disable-check-make-chdir disable make trying to guess when it should automatically cd ${.CURDIR} * Merge with NetBSD make, changes include: parse.c (ParseDoDependency): Spot that the syntax error is caused by an unresolved cvs/rcs conflict and say so. var.c: most of Var* functions now take a ctxt as 1st arg. now does variable substituion on rhs of sysv style modifiers. * var.c (Var_Set): exporting of command line variables (VAR_CMD) is now done here. We append the name='value' to .MAKEOVERRIDES rather than directly into MAKEFLAGS as this allows a Makefile to use .MAKEOVERRIDES= to disable this behaviour. GNU make uses a very similar mechanism. Note that in adding name='value' to .MAKEOVERRIDES we do the moral equivalent of: .MAKEOVERRIDES:= ${.MAKEOVERRIDES:Nname=*} name='val' Fri Jun 1 14:08:02 2001 Simon J. Gerraty * make-conf.h (USE_IOVEC): make it conditional on HAVE_SYS_UIO_H * Merged with NetBSD make make -dx can now be used to run commands via sh -x better error messages on exec failures. Thu May 31 01:44:54 2001 Simon J. Gerraty * Makefile.in (main.o): depends on ${SRCS} ${MAKEFILE} so that MAKE_VERSION gets updated. Also don't use ?= for MAKE_VERSION, MACHINE etc otherwise they propagate from the previous bmake. * configure.in (machine): allow --with-machine=generic to make configure use machine.sh to set MACHINE. * job.c (JobInterrupt): convert to using WAIT_T and friends. * Makefile.in: mention in bmake.1 that we use autoconf. * make.1: mention MAKE_PRINT_VAR_ON_ERROR. Wed May 30 23:17:18 2001 Simon J. Gerraty * main.c (ReadMakefile): don't set MAKEFILE if reading ".depend" as that rather defeats the usefulness of ${MAKEFILE}. * main.c (MainParseArgs): append command line variable assignments to MAKEFLAGS so that they get propagated to child make's. Apparently this is required POSIX behaviour? Its useful anyway. Tue May 29 02:20:07 2001 Simon J. Gerraty * compat.c (CompatRunCommand): don't use perror() since stdio may cause problems in child of vfork(). * compat.c, main.c: Call PrintOnError() when we are going to bail. This routine prints out the .curdir where we stopped and will also display any vars listed in ${MAKE_PRINT_VAR_ON_ERROR}. * main.c: add ${.newline} to hold a "\n" - sometimes handy in :@ expansion. * var.c: VarLoopExpand: ignore addSpace if a \n is present. * Added RCSid's for the files we've touched. Thu May 24 15:41:37 2001 Simon J. Gerraty * configure.in: Thanks to some clues from mdb@juniper.net, added autoconf magic to control setting of MACHINE, MACHINE_ARCH as well as what ends up in _PATH_DEFSYSPATH. We now have: --with-machine=MACHINE explicitly set MACHINE --with-force-machine=MACHINE set FORCE_MACHINE --with-machine_arch=MACHINE_ARCH explicitly set MACHINE_ARCH --with-default-sys-path=PATH:DIR:LIST use an explicit _PATH_DEFSYSPATH --with-prefix-sys-path=PATH:DIR:LIST prefix _PATH_PREFIX_SYSPATH --with-path-objdirprefix=PATH override _PATH_OBJDIRPREFIX If _PATH_OBJDIRPREFIX is set to "no" we won't define it. * makefile: added a pathetically simple makefile to drive bootstrapping. Running configure by hand is more useful. * Makefile.in: added MAKE_VERSION, and reworked things to be less dependent on NetBSD bsd.*.mk * pathnames.h: allow NO_PATH_OBJDIRPREFIX to stop us defining _PATH_OBJDIRPREFIX for those that don't want a default. construct _PATH_DEFSYSPATH from the info we get from configure. * main.c: allow for no _PATH_OBJDIRPREFIX, set ${MAKE_VERSION} if MAKE_VERSION is defined. * compat.c: when we bail, print out the .CURDIR we were in. Sat May 12 00:34:12 2001 Simon J. Gerraty * Merged with NetBSD make * var.c: fixed a bug in the handling of the modifier :P if the node as found but the path was null, we segfault trying to duplicate it. Mon Mar 5 16:20:33 2001 Simon J. Gerraty * Merged with NetBSD make * make.c: Make_OODate's test for a library out of date was using cmtime where it should have used mtime (my bug). * compat.c: Use perror() to tell us what really went wrong when we cannot exec a command. Fri Dec 15 10:11:08 2000 Simon J. Gerraty * Merged with NetBSD make Sat Jun 10 10:11:08 2000 Simon J. Gerraty * Merged with NetBSD make Thu Jun 1 10:11:08 2000 Simon J. Gerraty * Merged with NetBSD make Tue May 30 10:11:08 2000 Simon J. Gerraty * Merged with NetBSD make Thu Apr 27 00:07:47 2000 Simon J. Gerraty * util.c: don't provide signal() since we use sigcompat.c * Makefile.in: added a build target. * var.c (Var_Parse): added ODE modifiers :U, :D, :L, :P, :@ and :! These allow some quite clever magic. * main.c (main): added support for getenv(MAKESYSPATH). Mon Apr 2 16:25:13 2000 Simon J. Gerraty * Disable $PWD overriding getcwd() if MAKEOBJDIRPREFIX is set. This avoids objdir having a different value depending on how a directory was reached (via command line, or subdir.mk). * If FORCE_MACHINE is defined, ignore getenv("MACHINE"). Mon Apr 2 23:15:31 2000 Simon J. Gerraty * Do a chdir(${.CURDIR}) before invoking ${.MAKE} or ${.MAKE:T} if MAKEOBJDIRPREFIX is set and NOCHECKMAKECHDIR is not. I've been testing this in NetBSD's make for some weeks. * Turn Makefile into Makefile.in and make it useful. Tue Feb 29 22:08:00 2000 Simon J. Gerraty * Imported NetBSD's -current make(1) and resolve conflicts. * Applied autoconf patches from bmake v2 * Imported clean code base from NetBSD-1.0 diff --git a/contrib/bmake/FILES b/contrib/bmake/FILES index dc0f6f33c763..53b961468db6 100644 --- a/contrib/bmake/FILES +++ b/contrib/bmake/FILES @@ -1,849 +1,860 @@ ChangeLog FILES LICENSE Makefile Makefile.config.in PSD.doc/Makefile PSD.doc/tutorial.ms README VERSION +_strtol.h aclocal.m4 arch.c bmake.1 bmake.cat1 boot-strap bsd.after-import.mk buf.c buf.h compat.c cond.c config.h.in configure configure.in dir.c dir.h dirname.c -enum.c -enum.h filemon/filemon.h filemon/filemon_dev.c filemon/filemon_ktrace.c find_lib.sh for.c getopt.c hash.c hash.h install-sh job.c job.h lst.c lst.h machine.sh main.c make-bootstrap.sh.in make-conf.h make.1 make.c make.h make_malloc.c make_malloc.h makefile.in meta.c meta.h metachar.c metachar.h missing/sys/cdefs.h mkdeps.sh nonints.h os.sh parse.c pathnames.h ranlib.h realpath.c setenv.c +sigact.h +sigaction.c sigcompat.c str.c str.h stresep.c strlcpy.c suff.c targ.c trace.c trace.h unit-tests/Makefile unit-tests/Makefile.config.in unit-tests/archive-suffix.exp unit-tests/archive-suffix.mk unit-tests/archive.exp unit-tests/archive.mk unit-tests/cmd-errors-jobs.exp unit-tests/cmd-errors-jobs.mk unit-tests/cmd-errors-lint.exp unit-tests/cmd-errors-lint.mk unit-tests/cmd-errors.exp unit-tests/cmd-errors.mk unit-tests/cmd-interrupt.exp unit-tests/cmd-interrupt.mk unit-tests/cmdline-redirect-stdin.exp unit-tests/cmdline-redirect-stdin.mk unit-tests/cmdline-undefined.exp unit-tests/cmdline-undefined.mk unit-tests/cmdline.exp unit-tests/cmdline.mk unit-tests/comment.exp unit-tests/comment.mk unit-tests/compat-error.exp unit-tests/compat-error.mk unit-tests/cond-cmp-numeric-eq.exp unit-tests/cond-cmp-numeric-eq.mk unit-tests/cond-cmp-numeric-ge.exp unit-tests/cond-cmp-numeric-ge.mk unit-tests/cond-cmp-numeric-gt.exp unit-tests/cond-cmp-numeric-gt.mk unit-tests/cond-cmp-numeric-le.exp unit-tests/cond-cmp-numeric-le.mk unit-tests/cond-cmp-numeric-lt.exp unit-tests/cond-cmp-numeric-lt.mk unit-tests/cond-cmp-numeric-ne.exp unit-tests/cond-cmp-numeric-ne.mk unit-tests/cond-cmp-numeric.exp unit-tests/cond-cmp-numeric.mk unit-tests/cond-cmp-string.exp unit-tests/cond-cmp-string.mk unit-tests/cond-cmp-unary.exp unit-tests/cond-cmp-unary.mk unit-tests/cond-eof.exp unit-tests/cond-eof.mk unit-tests/cond-func-commands.exp unit-tests/cond-func-commands.mk unit-tests/cond-func-defined.exp unit-tests/cond-func-defined.mk unit-tests/cond-func-empty.exp unit-tests/cond-func-empty.mk unit-tests/cond-func-exists.exp unit-tests/cond-func-exists.mk unit-tests/cond-func-make-main.exp unit-tests/cond-func-make-main.mk unit-tests/cond-func-make.exp unit-tests/cond-func-make.mk unit-tests/cond-func-target.exp unit-tests/cond-func-target.mk unit-tests/cond-func.exp unit-tests/cond-func.mk unit-tests/cond-late.exp unit-tests/cond-late.mk unit-tests/cond-op-and-lint.exp unit-tests/cond-op-and-lint.mk unit-tests/cond-op-and.exp unit-tests/cond-op-and.mk unit-tests/cond-op-not.exp unit-tests/cond-op-not.mk unit-tests/cond-op-or-lint.exp unit-tests/cond-op-or-lint.mk unit-tests/cond-op-or.exp unit-tests/cond-op-or.mk unit-tests/cond-op-parentheses.exp unit-tests/cond-op-parentheses.mk unit-tests/cond-op.exp unit-tests/cond-op.mk unit-tests/cond-short.exp unit-tests/cond-short.mk unit-tests/cond-token-number.exp unit-tests/cond-token-number.mk unit-tests/cond-token-plain.exp unit-tests/cond-token-plain.mk unit-tests/cond-token-string.exp unit-tests/cond-token-string.mk unit-tests/cond-token-var.exp unit-tests/cond-token-var.mk unit-tests/cond-undef-lint.exp unit-tests/cond-undef-lint.mk unit-tests/cond1.exp unit-tests/cond1.mk unit-tests/counter-append.exp unit-tests/counter-append.mk unit-tests/counter.exp unit-tests/counter.mk unit-tests/dep-colon-bug-cross-file.exp unit-tests/dep-colon-bug-cross-file.mk unit-tests/dep-colon.exp unit-tests/dep-colon.mk unit-tests/dep-double-colon-indep.exp unit-tests/dep-double-colon-indep.mk unit-tests/dep-double-colon.exp unit-tests/dep-double-colon.mk unit-tests/dep-exclam.exp unit-tests/dep-exclam.mk unit-tests/dep-none.exp unit-tests/dep-none.mk unit-tests/dep-percent.exp unit-tests/dep-percent.mk unit-tests/dep-var.exp unit-tests/dep-var.mk unit-tests/dep-wildcards.exp unit-tests/dep-wildcards.mk unit-tests/dep.exp unit-tests/dep.mk unit-tests/depsrc-end.exp unit-tests/depsrc-end.mk unit-tests/depsrc-exec.exp unit-tests/depsrc-exec.mk unit-tests/depsrc-ignore.exp unit-tests/depsrc-ignore.mk unit-tests/depsrc-made.exp unit-tests/depsrc-made.mk unit-tests/depsrc-make.exp unit-tests/depsrc-make.mk unit-tests/depsrc-meta.exp unit-tests/depsrc-meta.mk unit-tests/depsrc-nometa.exp unit-tests/depsrc-nometa.mk unit-tests/depsrc-nometa_cmp.exp unit-tests/depsrc-nometa_cmp.mk unit-tests/depsrc-nopath.exp unit-tests/depsrc-nopath.mk unit-tests/depsrc-notmain.exp unit-tests/depsrc-notmain.mk unit-tests/depsrc-optional.exp unit-tests/depsrc-optional.mk unit-tests/depsrc-phony.exp unit-tests/depsrc-phony.mk unit-tests/depsrc-precious.exp unit-tests/depsrc-precious.mk unit-tests/depsrc-recursive.exp unit-tests/depsrc-recursive.mk unit-tests/depsrc-silent.exp unit-tests/depsrc-silent.mk unit-tests/depsrc-use.exp unit-tests/depsrc-use.mk unit-tests/depsrc-usebefore-double-colon.exp unit-tests/depsrc-usebefore-double-colon.mk unit-tests/depsrc-usebefore.exp unit-tests/depsrc-usebefore.mk unit-tests/depsrc-wait.exp unit-tests/depsrc-wait.mk unit-tests/depsrc.exp unit-tests/depsrc.mk unit-tests/deptgt-begin-fail-indirect.exp unit-tests/deptgt-begin-fail-indirect.mk unit-tests/deptgt-begin-fail.exp unit-tests/deptgt-begin-fail.mk unit-tests/deptgt-begin.exp unit-tests/deptgt-begin.mk unit-tests/deptgt-default.exp unit-tests/deptgt-default.mk unit-tests/deptgt-delete_on_error.exp unit-tests/deptgt-delete_on_error.mk unit-tests/deptgt-end-fail-all.exp unit-tests/deptgt-end-fail-all.mk unit-tests/deptgt-end-fail-indirect.exp unit-tests/deptgt-end-fail-indirect.mk unit-tests/deptgt-end-fail.exp unit-tests/deptgt-end-fail.mk unit-tests/deptgt-end-jobs.exp unit-tests/deptgt-end-jobs.mk unit-tests/deptgt-end.exp unit-tests/deptgt-end.mk unit-tests/deptgt-error.exp unit-tests/deptgt-error.mk unit-tests/deptgt-ignore.exp unit-tests/deptgt-ignore.mk unit-tests/deptgt-interrupt.exp unit-tests/deptgt-interrupt.mk unit-tests/deptgt-main.exp unit-tests/deptgt-main.mk unit-tests/deptgt-makeflags.exp unit-tests/deptgt-makeflags.mk unit-tests/deptgt-no_parallel.exp unit-tests/deptgt-no_parallel.mk unit-tests/deptgt-nopath.exp unit-tests/deptgt-nopath.mk unit-tests/deptgt-notparallel.exp unit-tests/deptgt-notparallel.mk unit-tests/deptgt-objdir.exp unit-tests/deptgt-objdir.mk unit-tests/deptgt-order.exp unit-tests/deptgt-order.mk unit-tests/deptgt-path-suffix.exp unit-tests/deptgt-path-suffix.mk unit-tests/deptgt-path.exp unit-tests/deptgt-path.mk unit-tests/deptgt-phony.exp unit-tests/deptgt-phony.mk unit-tests/deptgt-precious.exp unit-tests/deptgt-precious.mk unit-tests/deptgt-shell.exp unit-tests/deptgt-shell.mk unit-tests/deptgt-silent.exp unit-tests/deptgt-silent.mk unit-tests/deptgt-stale.exp unit-tests/deptgt-stale.mk unit-tests/deptgt-suffixes.exp unit-tests/deptgt-suffixes.mk unit-tests/deptgt.exp unit-tests/deptgt.mk unit-tests/dir-expand-path.exp unit-tests/dir-expand-path.mk unit-tests/dir.exp unit-tests/dir.mk unit-tests/directive-dinclude.exp unit-tests/directive-dinclude.mk unit-tests/directive-elif.exp unit-tests/directive-elif.mk unit-tests/directive-elifdef.exp unit-tests/directive-elifdef.mk unit-tests/directive-elifmake.exp unit-tests/directive-elifmake.mk unit-tests/directive-elifndef.exp unit-tests/directive-elifndef.mk unit-tests/directive-elifnmake.exp unit-tests/directive-elifnmake.mk unit-tests/directive-else.exp unit-tests/directive-else.mk unit-tests/directive-endfor.exp unit-tests/directive-endfor.mk unit-tests/directive-endif.exp unit-tests/directive-endif.mk unit-tests/directive-error.exp unit-tests/directive-error.mk unit-tests/directive-export-env.exp unit-tests/directive-export-env.mk unit-tests/directive-export-gmake.exp unit-tests/directive-export-gmake.mk unit-tests/directive-export-impl.exp unit-tests/directive-export-impl.mk unit-tests/directive-export-literal.exp unit-tests/directive-export-literal.mk unit-tests/directive-export.exp unit-tests/directive-export.mk unit-tests/directive-for-errors.exp unit-tests/directive-for-errors.mk unit-tests/directive-for-escape.exp unit-tests/directive-for-escape.mk unit-tests/directive-for-generating-endif.exp unit-tests/directive-for-generating-endif.mk +unit-tests/directive-for-if.exp +unit-tests/directive-for-if.mk unit-tests/directive-for-lines.exp unit-tests/directive-for-lines.mk unit-tests/directive-for-null.exp unit-tests/directive-for-null.mk unit-tests/directive-for.exp unit-tests/directive-for.mk unit-tests/directive-hyphen-include.exp unit-tests/directive-hyphen-include.mk unit-tests/directive-if-nested.exp unit-tests/directive-if-nested.mk unit-tests/directive-if.exp unit-tests/directive-if.mk unit-tests/directive-ifdef.exp unit-tests/directive-ifdef.mk unit-tests/directive-ifmake.exp unit-tests/directive-ifmake.mk unit-tests/directive-ifndef.exp unit-tests/directive-ifndef.mk unit-tests/directive-ifnmake.exp unit-tests/directive-ifnmake.mk unit-tests/directive-include-fatal.exp unit-tests/directive-include-fatal.mk unit-tests/directive-include.exp unit-tests/directive-include.mk unit-tests/directive-info.exp unit-tests/directive-info.mk unit-tests/directive-misspellings.exp unit-tests/directive-misspellings.mk unit-tests/directive-sinclude.exp unit-tests/directive-sinclude.mk unit-tests/directive-undef.exp unit-tests/directive-undef.mk unit-tests/directive-unexport-env.exp unit-tests/directive-unexport-env.mk unit-tests/directive-unexport.exp unit-tests/directive-unexport.mk unit-tests/directive-warning.exp unit-tests/directive-warning.mk unit-tests/directive.exp unit-tests/directive.mk unit-tests/dollar.exp unit-tests/dollar.mk unit-tests/doterror.exp unit-tests/doterror.mk unit-tests/dotwait.exp unit-tests/dotwait.mk unit-tests/envfirst.exp unit-tests/envfirst.mk unit-tests/error.exp unit-tests/error.mk unit-tests/escape.exp unit-tests/escape.mk unit-tests/export-all.exp unit-tests/export-all.mk unit-tests/export-env.exp unit-tests/export-env.mk unit-tests/export-variants.exp unit-tests/export-variants.mk unit-tests/export.exp unit-tests/export.mk unit-tests/forloop.exp unit-tests/forloop.mk unit-tests/forsubst.exp unit-tests/forsubst.mk unit-tests/gnode-submake.exp unit-tests/gnode-submake.mk unit-tests/hanoi-include.exp unit-tests/hanoi-include.mk unit-tests/impsrc.exp unit-tests/impsrc.mk unit-tests/include-main.exp unit-tests/include-main.mk unit-tests/include-sub.mk unit-tests/include-subsub.mk unit-tests/job-flags.exp unit-tests/job-flags.mk unit-tests/job-output-long-lines.exp unit-tests/job-output-long-lines.mk unit-tests/job-output-null.exp unit-tests/job-output-null.mk unit-tests/jobs-empty-commands-error.exp unit-tests/jobs-empty-commands-error.mk unit-tests/jobs-empty-commands.exp unit-tests/jobs-empty-commands.mk unit-tests/jobs-error-indirect.exp unit-tests/jobs-error-indirect.mk unit-tests/jobs-error-nested-make.exp unit-tests/jobs-error-nested-make.mk unit-tests/jobs-error-nested.exp unit-tests/jobs-error-nested.mk unit-tests/lint.exp unit-tests/lint.mk unit-tests/make-exported.exp unit-tests/make-exported.mk unit-tests/meta-cmd-cmp.exp unit-tests/meta-cmd-cmp.mk unit-tests/moderrs.exp unit-tests/moderrs.mk unit-tests/modmatch.exp unit-tests/modmatch.mk unit-tests/modmisc.exp unit-tests/modmisc.mk unit-tests/modts.exp unit-tests/modts.mk unit-tests/modword.exp unit-tests/modword.mk unit-tests/objdir-writable.exp unit-tests/objdir-writable.mk unit-tests/opt-backwards.exp unit-tests/opt-backwards.mk unit-tests/opt-chdir.exp unit-tests/opt-chdir.mk unit-tests/opt-debug-all.exp unit-tests/opt-debug-all.mk unit-tests/opt-debug-archive.exp unit-tests/opt-debug-archive.mk unit-tests/opt-debug-cond.exp unit-tests/opt-debug-cond.mk unit-tests/opt-debug-curdir.exp unit-tests/opt-debug-curdir.mk unit-tests/opt-debug-dir.exp unit-tests/opt-debug-dir.mk unit-tests/opt-debug-errors-jobs.exp unit-tests/opt-debug-errors-jobs.mk unit-tests/opt-debug-errors.exp unit-tests/opt-debug-errors.mk unit-tests/opt-debug-file.exp unit-tests/opt-debug-file.mk unit-tests/opt-debug-for.exp unit-tests/opt-debug-for.mk unit-tests/opt-debug-graph1.exp unit-tests/opt-debug-graph1.mk unit-tests/opt-debug-graph2.exp unit-tests/opt-debug-graph2.mk unit-tests/opt-debug-graph3.exp unit-tests/opt-debug-graph3.mk unit-tests/opt-debug-hash.exp unit-tests/opt-debug-hash.mk unit-tests/opt-debug-jobs.exp unit-tests/opt-debug-jobs.mk unit-tests/opt-debug-lint.exp unit-tests/opt-debug-lint.mk unit-tests/opt-debug-loud.exp unit-tests/opt-debug-loud.mk unit-tests/opt-debug-making.exp unit-tests/opt-debug-making.mk unit-tests/opt-debug-meta.exp unit-tests/opt-debug-meta.mk unit-tests/opt-debug-no-rm.exp unit-tests/opt-debug-no-rm.mk unit-tests/opt-debug-parse.exp unit-tests/opt-debug-parse.mk unit-tests/opt-debug-suff.exp unit-tests/opt-debug-suff.mk unit-tests/opt-debug-targets.exp unit-tests/opt-debug-targets.mk unit-tests/opt-debug-var.exp unit-tests/opt-debug-var.mk unit-tests/opt-debug-varraw.exp unit-tests/opt-debug-varraw.mk unit-tests/opt-debug-x-trace.exp unit-tests/opt-debug-x-trace.mk unit-tests/opt-debug.exp unit-tests/opt-debug.mk unit-tests/opt-define.exp unit-tests/opt-define.mk unit-tests/opt-env.exp unit-tests/opt-env.mk unit-tests/opt-file.exp unit-tests/opt-file.mk unit-tests/opt-ignore.exp unit-tests/opt-ignore.mk unit-tests/opt-include-dir.exp unit-tests/opt-include-dir.mk unit-tests/opt-jobs-internal.exp unit-tests/opt-jobs-internal.mk unit-tests/opt-jobs-no-action.exp unit-tests/opt-jobs-no-action.mk unit-tests/opt-jobs.exp unit-tests/opt-jobs.mk unit-tests/opt-keep-going-multiple.exp unit-tests/opt-keep-going-multiple.mk unit-tests/opt-keep-going.exp unit-tests/opt-keep-going.mk unit-tests/opt-m-include-dir.exp unit-tests/opt-m-include-dir.mk unit-tests/opt-no-action-at-all.exp unit-tests/opt-no-action-at-all.mk unit-tests/opt-no-action-runflags.exp unit-tests/opt-no-action-runflags.mk unit-tests/opt-no-action-touch.exp unit-tests/opt-no-action-touch.mk unit-tests/opt-no-action.exp unit-tests/opt-no-action.mk unit-tests/opt-query.exp unit-tests/opt-query.mk unit-tests/opt-raw.exp unit-tests/opt-raw.mk unit-tests/opt-silent.exp unit-tests/opt-silent.mk unit-tests/opt-touch-jobs.exp unit-tests/opt-touch-jobs.mk unit-tests/opt-touch.exp unit-tests/opt-touch.mk unit-tests/opt-tracefile.exp unit-tests/opt-tracefile.mk unit-tests/opt-var-expanded.exp unit-tests/opt-var-expanded.mk unit-tests/opt-var-literal.exp unit-tests/opt-var-literal.mk unit-tests/opt-warnings-as-errors.exp unit-tests/opt-warnings-as-errors.mk unit-tests/opt-where-am-i.exp unit-tests/opt-where-am-i.mk unit-tests/opt-x-reduce-exported.exp unit-tests/opt-x-reduce-exported.mk unit-tests/opt.exp unit-tests/opt.mk unit-tests/order.exp unit-tests/order.mk unit-tests/parse-var.exp unit-tests/parse-var.mk unit-tests/phony-end.exp unit-tests/phony-end.mk unit-tests/posix.exp unit-tests/posix.mk unit-tests/posix1.exp unit-tests/posix1.mk unit-tests/recursive.exp unit-tests/recursive.mk unit-tests/sh-dots.exp unit-tests/sh-dots.mk unit-tests/sh-errctl.exp unit-tests/sh-errctl.mk unit-tests/sh-flags.exp unit-tests/sh-flags.mk unit-tests/sh-jobs-error.exp unit-tests/sh-jobs-error.mk unit-tests/sh-jobs.exp unit-tests/sh-jobs.mk unit-tests/sh-leading-at.exp unit-tests/sh-leading-at.mk unit-tests/sh-leading-hyphen.exp unit-tests/sh-leading-hyphen.mk unit-tests/sh-leading-plus.exp unit-tests/sh-leading-plus.mk unit-tests/sh-meta-chars.exp unit-tests/sh-meta-chars.mk unit-tests/sh-multi-line.exp unit-tests/sh-multi-line.mk unit-tests/sh-single-line.exp unit-tests/sh-single-line.mk unit-tests/sh.exp unit-tests/sh.mk unit-tests/shell-csh.exp unit-tests/shell-csh.mk unit-tests/shell-custom.exp unit-tests/shell-custom.mk unit-tests/shell-ksh.exp unit-tests/shell-ksh.mk unit-tests/shell-sh.exp unit-tests/shell-sh.mk unit-tests/suff-add-later.exp unit-tests/suff-add-later.mk unit-tests/suff-clear-regular.exp unit-tests/suff-clear-regular.mk unit-tests/suff-clear-single.exp unit-tests/suff-clear-single.mk unit-tests/suff-incomplete.exp unit-tests/suff-incomplete.mk unit-tests/suff-lookup.exp unit-tests/suff-lookup.mk unit-tests/suff-main-several.exp unit-tests/suff-main-several.mk unit-tests/suff-main.exp unit-tests/suff-main.mk unit-tests/suff-phony.exp unit-tests/suff-phony.mk unit-tests/suff-rebuild.exp unit-tests/suff-rebuild.mk unit-tests/suff-self.exp unit-tests/suff-self.mk unit-tests/suff-transform-debug.exp unit-tests/suff-transform-debug.mk unit-tests/suff-transform-endless.exp unit-tests/suff-transform-endless.mk unit-tests/suff-transform-expand.exp unit-tests/suff-transform-expand.mk unit-tests/suff-transform-select.exp unit-tests/suff-transform-select.mk unit-tests/sunshcmd.exp unit-tests/sunshcmd.mk unit-tests/ternary.exp unit-tests/ternary.mk unit-tests/unexport-env.exp unit-tests/unexport-env.mk unit-tests/unexport.exp unit-tests/unexport.mk unit-tests/use-inference.exp unit-tests/use-inference.mk unit-tests/var-class-cmdline.exp unit-tests/var-class-cmdline.mk unit-tests/var-class-env.exp unit-tests/var-class-env.mk unit-tests/var-class-global.exp unit-tests/var-class-global.mk unit-tests/var-class-local-legacy.exp unit-tests/var-class-local-legacy.mk unit-tests/var-class-local.exp unit-tests/var-class-local.mk unit-tests/var-class.exp unit-tests/var-class.mk unit-tests/var-eval-short.exp unit-tests/var-eval-short.mk unit-tests/var-op-append.exp unit-tests/var-op-append.mk unit-tests/var-op-assign.exp unit-tests/var-op-assign.mk unit-tests/var-op-default.exp unit-tests/var-op-default.mk unit-tests/var-op-expand.exp unit-tests/var-op-expand.mk unit-tests/var-op-shell.exp unit-tests/var-op-shell.mk unit-tests/var-op-sunsh.exp unit-tests/var-op-sunsh.mk unit-tests/var-op.exp unit-tests/var-op.mk unit-tests/var-recursive.exp unit-tests/var-recursive.mk unit-tests/varcmd.exp unit-tests/varcmd.mk unit-tests/vardebug.exp unit-tests/vardebug.mk unit-tests/varfind.exp unit-tests/varfind.mk unit-tests/varmisc.exp unit-tests/varmisc.mk unit-tests/varmod-assign.exp unit-tests/varmod-assign.mk unit-tests/varmod-defined.exp unit-tests/varmod-defined.mk unit-tests/varmod-edge.exp unit-tests/varmod-edge.mk unit-tests/varmod-exclam-shell.exp unit-tests/varmod-exclam-shell.mk unit-tests/varmod-extension.exp unit-tests/varmod-extension.mk unit-tests/varmod-gmtime.exp unit-tests/varmod-gmtime.mk unit-tests/varmod-hash.exp unit-tests/varmod-hash.mk unit-tests/varmod-head.exp unit-tests/varmod-head.mk unit-tests/varmod-ifelse.exp unit-tests/varmod-ifelse.mk unit-tests/varmod-indirect.exp unit-tests/varmod-indirect.mk unit-tests/varmod-l-name-to-value.exp unit-tests/varmod-l-name-to-value.mk unit-tests/varmod-localtime.exp unit-tests/varmod-localtime.mk +unit-tests/varmod-loop-delete.exp +unit-tests/varmod-loop-delete.mk unit-tests/varmod-loop-varname.exp unit-tests/varmod-loop-varname.mk unit-tests/varmod-loop.exp unit-tests/varmod-loop.mk unit-tests/varmod-match-escape.exp unit-tests/varmod-match-escape.mk unit-tests/varmod-match.exp unit-tests/varmod-match.mk unit-tests/varmod-no-match.exp unit-tests/varmod-no-match.mk +unit-tests/varmod-order-numeric.exp +unit-tests/varmod-order-numeric.mk unit-tests/varmod-order-reverse.exp unit-tests/varmod-order-reverse.mk unit-tests/varmod-order-shuffle.exp unit-tests/varmod-order-shuffle.mk +unit-tests/varmod-order-string.exp +unit-tests/varmod-order-string.mk unit-tests/varmod-order.exp unit-tests/varmod-order.mk unit-tests/varmod-path.exp unit-tests/varmod-path.mk unit-tests/varmod-quote-dollar.exp unit-tests/varmod-quote-dollar.mk unit-tests/varmod-quote.exp unit-tests/varmod-quote.mk unit-tests/varmod-range.exp unit-tests/varmod-range.mk unit-tests/varmod-remember.exp unit-tests/varmod-remember.mk unit-tests/varmod-root.exp unit-tests/varmod-root.mk unit-tests/varmod-select-words.exp unit-tests/varmod-select-words.mk unit-tests/varmod-shell.exp unit-tests/varmod-shell.mk unit-tests/varmod-subst-regex.exp unit-tests/varmod-subst-regex.mk unit-tests/varmod-subst.exp unit-tests/varmod-subst.mk unit-tests/varmod-sun-shell.exp unit-tests/varmod-sun-shell.mk unit-tests/varmod-sysv.exp unit-tests/varmod-sysv.mk unit-tests/varmod-tail.exp unit-tests/varmod-tail.mk unit-tests/varmod-to-abs.exp unit-tests/varmod-to-abs.mk unit-tests/varmod-to-lower.exp unit-tests/varmod-to-lower.mk unit-tests/varmod-to-many-words.exp unit-tests/varmod-to-many-words.mk unit-tests/varmod-to-one-word.exp unit-tests/varmod-to-one-word.mk unit-tests/varmod-to-separator.exp unit-tests/varmod-to-separator.mk unit-tests/varmod-to-upper.exp unit-tests/varmod-to-upper.mk unit-tests/varmod-undefined.exp unit-tests/varmod-undefined.mk unit-tests/varmod-unique.exp unit-tests/varmod-unique.mk unit-tests/varmod.exp unit-tests/varmod.mk unit-tests/varname-dollar.exp unit-tests/varname-dollar.mk unit-tests/varname-dot-alltargets.exp unit-tests/varname-dot-alltargets.mk unit-tests/varname-dot-curdir.exp unit-tests/varname-dot-curdir.mk unit-tests/varname-dot-includedfromdir.exp unit-tests/varname-dot-includedfromdir.mk unit-tests/varname-dot-includedfromfile.exp unit-tests/varname-dot-includedfromfile.mk unit-tests/varname-dot-includes.exp unit-tests/varname-dot-includes.mk unit-tests/varname-dot-libs.exp unit-tests/varname-dot-libs.mk unit-tests/varname-dot-make-dependfile.exp unit-tests/varname-dot-make-dependfile.mk unit-tests/varname-dot-make-expand_variables.exp unit-tests/varname-dot-make-expand_variables.mk unit-tests/varname-dot-make-exported.exp unit-tests/varname-dot-make-exported.mk unit-tests/varname-dot-make-jobs-prefix.exp unit-tests/varname-dot-make-jobs-prefix.mk unit-tests/varname-dot-make-jobs.exp unit-tests/varname-dot-make-jobs.mk unit-tests/varname-dot-make-level.exp unit-tests/varname-dot-make-level.mk unit-tests/varname-dot-make-makefile_preference.exp unit-tests/varname-dot-make-makefile_preference.mk unit-tests/varname-dot-make-makefiles.exp unit-tests/varname-dot-make-makefiles.mk unit-tests/varname-dot-make-meta-bailiwick.exp unit-tests/varname-dot-make-meta-bailiwick.mk unit-tests/varname-dot-make-meta-created.exp unit-tests/varname-dot-make-meta-created.mk unit-tests/varname-dot-make-meta-files.exp unit-tests/varname-dot-make-meta-files.mk unit-tests/varname-dot-make-meta-ignore_filter.exp unit-tests/varname-dot-make-meta-ignore_filter.mk unit-tests/varname-dot-make-meta-ignore_paths.exp unit-tests/varname-dot-make-meta-ignore_paths.mk unit-tests/varname-dot-make-meta-ignore_patterns.exp unit-tests/varname-dot-make-meta-ignore_patterns.mk unit-tests/varname-dot-make-meta-prefix.exp unit-tests/varname-dot-make-meta-prefix.mk unit-tests/varname-dot-make-mode.exp unit-tests/varname-dot-make-mode.mk unit-tests/varname-dot-make-path_filemon.exp unit-tests/varname-dot-make-path_filemon.mk unit-tests/varname-dot-make-pid.exp unit-tests/varname-dot-make-pid.mk unit-tests/varname-dot-make-ppid.exp unit-tests/varname-dot-make-ppid.mk unit-tests/varname-dot-make-save_dollars.exp unit-tests/varname-dot-make-save_dollars.mk unit-tests/varname-dot-makeflags.exp unit-tests/varname-dot-makeflags.mk unit-tests/varname-dot-makeoverrides.exp unit-tests/varname-dot-makeoverrides.mk unit-tests/varname-dot-newline.exp unit-tests/varname-dot-newline.mk unit-tests/varname-dot-objdir.exp unit-tests/varname-dot-objdir.mk unit-tests/varname-dot-parsedir.exp unit-tests/varname-dot-parsedir.mk unit-tests/varname-dot-parsefile.exp unit-tests/varname-dot-parsefile.mk unit-tests/varname-dot-path.exp unit-tests/varname-dot-path.mk unit-tests/varname-dot-shell.exp unit-tests/varname-dot-shell.mk +unit-tests/varname-dot-suffixes.exp +unit-tests/varname-dot-suffixes.mk unit-tests/varname-dot-targets.exp unit-tests/varname-dot-targets.mk unit-tests/varname-empty.exp unit-tests/varname-empty.mk unit-tests/varname-make.exp unit-tests/varname-make.mk unit-tests/varname-make_print_var_on_error-jobs.exp unit-tests/varname-make_print_var_on_error-jobs.mk unit-tests/varname-make_print_var_on_error.exp unit-tests/varname-make_print_var_on_error.mk unit-tests/varname-makefile.exp unit-tests/varname-makefile.mk unit-tests/varname-makeflags.exp unit-tests/varname-makeflags.mk unit-tests/varname-pwd.exp unit-tests/varname-pwd.mk unit-tests/varname-vpath.exp unit-tests/varname-vpath.mk unit-tests/varname.exp unit-tests/varname.mk unit-tests/varparse-dynamic.exp unit-tests/varparse-dynamic.mk unit-tests/varparse-errors.exp unit-tests/varparse-errors.mk unit-tests/varparse-mod.exp unit-tests/varparse-mod.mk unit-tests/varparse-undef-partial.exp unit-tests/varparse-undef-partial.mk unit-tests/varquote.exp unit-tests/varquote.mk util.c var.c wait.h diff --git a/contrib/bmake/Makefile b/contrib/bmake/Makefile index 38ccb8a6a636..82d9db52af76 100644 --- a/contrib/bmake/Makefile +++ b/contrib/bmake/Makefile @@ -1,220 +1,221 @@ -# $Id: Makefile,v 1.114 2020/11/13 21:47:25 sjg Exp $ +# $Id: Makefile,v 1.117 2021/12/04 18:51:30 sjg Exp $ PROG= bmake SRCS= \ arch.c \ buf.c \ compat.c \ cond.c \ dir.c \ - enum.c \ for.c \ hash.c \ job.c \ lst.c \ main.c \ make.c \ make_malloc.c \ meta.c \ metachar.c \ parse.c \ str.c \ suff.c \ targ.c \ trace.c \ util.c \ var.c .-include "VERSION" .-include "Makefile.inc" # this file gets generated by configure .-include "Makefile.config" .if !empty(LIBOBJS) SRCS+= ${LIBOBJS:T:.o=.c} .endif # just in case prefix?= /usr srcdir?= ${.CURDIR} DEFAULT_SYS_PATH?= ${prefix}/share/mk CPPFLAGS+= -DUSE_META CFLAGS+= ${CPPFLAGS} CFLAGS+= -D_PATH_DEFSYSPATH=\"${DEFAULT_SYS_PATH}\" CFLAGS+= -I. -I${srcdir} ${XDEFS} -DMAKE_NATIVE CFLAGS+= ${COPTS.${.ALLSRC:M*.c:T:u}} COPTS.main.c+= "-DMAKE_VERSION=\"${_MAKE_VERSION}\"" .for x in FORCE_MACHINE FORCE_MACHINE_ARCH .ifdef $x COPTS.main.c+= "-D$x=\"${$x}\"" .endif .endfor # meta mode can be useful even without filemon # should be set by now USE_FILEMON ?= no .if ${USE_FILEMON:tl} != "no" .PATH: ${srcdir}/filemon SRCS+= filemon_${USE_FILEMON}.c COPTS.meta.c+= -DUSE_FILEMON -DUSE_FILEMON_${USE_FILEMON:tu} COPTS.job.c+= ${COPTS.meta.c} .if ${USE_FILEMON} == "dev" FILEMON_H ?= /usr/include/dev/filemon/filemon.h .if exists(${FILEMON_H}) && ${FILEMON_H:T} == "filemon.h" COPTS.filemon_dev.c += -DHAVE_FILEMON_H -I${FILEMON_H:H} .endif .endif # USE_FILEMON == dev .endif # USE_FILEMON .PATH: ${srcdir} .if make(obj) || make(clean) SUBDIR+= unit-tests .endif # start-delete1 for bsd.after-import.mk # we skip a lot of this when building as part of FreeBSD etc. # list of OS's which are derrived from BSD4.4 BSD44_LIST= NetBSD FreeBSD OpenBSD DragonFly MirBSD Bitrig # we are... OS := ${.MAKE.OS:U${uname -s:L:sh}} # are we 4.4BSD ? isBSD44:=${BSD44_LIST:M${OS}} .if ${isBSD44} == "" MANTARGET= cat INSTALL?=${srcdir}/install-sh -.if (${MACHINE} == "sun386") +.if ${MACHINE} == "sun386" # even I don't have one of these anymore :-) CFLAGS+= -DPORTAR -.elif (${MACHINE} != "sunos") +.elif ${OS} != "SunOS" +# assume the worst SRCS+= sigcompat.c CFLAGS+= -DSIGNAL_FLAGS=SA_RESTART .endif .else MANTARGET?= man .endif # turn this on by default - ignored if we are root WITH_INSTALL_AS_USER= # suppress with -DWITHOUT_* OPTIONS_DEFAULT_YES+= \ AUTOCONF_MK \ INSTALL_MK \ PROG_LINK OPTIONS_DEFAULT_NO+= \ PROG_VERSION # process options now .include .if ${MK_PROG_VERSION} == "yes" PROG_NAME= ${PROG}-${_MAKE_VERSION} .if ${MK_PROG_LINK} == "yes" SYMLINKS+= ${PROG_NAME} ${BINDIR}/${PROG} .endif .endif EXTRACT_MAN=no # end-delete1 MAN= ${PROG}.1 MAN1= ${MAN} -.if (${PROG} != "make") +.if ${PROG} != "make" CLEANFILES+= my.history .if make(${MAN}) || !exists(${srcdir}/${MAN}) my.history: @(echo ".Nm"; \ echo "is derived from NetBSD"; \ echo ".Xr make 1 ."; \ echo "It uses autoconf to facilitate portability to other platforms."; \ echo ".Pp") > $@ .NOPATH: ${MAN} ${MAN}: make.1 my.history @echo making $@ @sed \ -e '/^.Dt/s/MAKE/${PROG:tu}/' \ -e 's/^.Nx/NetBSD/' \ -e '/^.Nm/s/make/${PROG}/' \ -e '/^.Sh HISTORY/rmy.history' \ -e '/^.Sh HISTORY/,$$s,^.Nm,make,' ${srcdir}/make.1 > $@ all beforeinstall: ${MAN} _mfromdir=. .endif .endif MANTARGET?= cat MANDEST?= ${MANDIR}/${MANTARGET}1 .if ${MANTARGET} == "cat" _mfromdir=${srcdir} .endif .include CPPFLAGS+= -DMAKE_NATIVE -DHAVE_CONFIG_H COPTS.var.c += -Wno-cast-qual COPTS.job.c += -Wno-format-nonliteral COPTS.parse.c += -Wno-format-nonliteral COPTS.var.c += -Wno-format-nonliteral # Force these SHAREDIR= ${SHAREDIR.bmake:U${prefix}/share} BINDIR= ${BINDIR.bmake:U${prefix}/bin} MANDIR= ${MANDIR.bmake:U${SHAREDIR}/man} .if !exists(.depend) ${OBJS}: config.h .endif # start-delete2 for bsd.after-import.mk # make sure that MAKE_VERSION gets updated. main.o: ${srcdir}/VERSION .if ${MK_AUTOCONF_MK} == "yes" CONFIGURE_DEPS += ${.CURDIR}/VERSION # we do not need or want the generated makefile CONFIGURE_ARGS += --without-makefile +AUTOCONF_GENERATED_MAKEFILE = Makefile.config .include .endif -SHARE_MK?=${SHAREDIR}/mk -MKSRC=${srcdir}/mk -INSTALL?=${srcdir}/install-sh +SHARE_MK ?= ${SHAREDIR}/mk +MKSRC = ${srcdir}/mk +INSTALL ?= ${srcdir}/install-sh .if ${MK_INSTALL_MK} == "yes" install: install-mk .endif beforeinstall: test -d ${DESTDIR}${BINDIR} || ${INSTALL} -m 775 -d ${DESTDIR}${BINDIR} test -d ${DESTDIR}${MANDEST} || ${INSTALL} -m 775 -d ${DESTDIR}${MANDEST} install-mk: .if exists(${MKSRC}/install-mk) test -d ${DESTDIR}${SHARE_MK} || ${INSTALL} -m 775 -d ${DESTDIR}${SHARE_MK} sh ${MKSRC}/install-mk -v -m 644 ${DESTDIR}${SHARE_MK} .else @echo need to unpack mk.tar.gz under ${srcdir} or set MKSRC; false .endif # end-delete2 # A simple unit-test driver to help catch regressions TEST_MAKE ?= ${.OBJDIR}/${PROG:T} accept test: cd ${.CURDIR}/unit-tests && \ MAKEFLAGS= ${TEST_MAKE} -r -m / ${.TARGET} ${TESTS:DTESTS=${TESTS:Q}} diff --git a/contrib/bmake/Makefile.config.in b/contrib/bmake/Makefile.config.in index 55cd60ca80ba..042b2570ff88 100644 --- a/contrib/bmake/Makefile.config.in +++ b/contrib/bmake/Makefile.config.in @@ -1,22 +1,22 @@ # things set by configure _MAKE_VERSION?=@_MAKE_VERSION@ prefix?= @prefix@ srcdir= @srcdir@ -CC?= @CC@ +CC= @CC@ @force_machine@MACHINE?= @machine@ @force_machine_arch@MACHINE_ARCH?= @machine_arch@ DEFAULT_SYS_PATH?= @default_sys_path@ CPPFLAGS+= @CPPFLAGS@ CFLAGS+= ${CPPFLAGS} @DEFS@ LDFLAGS+= @LDFLAGS@ LIBOBJS+= @LIBOBJS@ LDADD+= @LIBS@ USE_META?= @use_meta@ USE_FILEMON?= @use_filemon@ FILEMON_H?= @filemon_h@ BMAKE_PATH_MAX?= @bmake_path_max@ # used if MAXPATHLEN not defined CPPFLAGS+= -DBMAKE_PATH_MAX=${BMAKE_PATH_MAX} diff --git a/contrib/bmake/VERSION b/contrib/bmake/VERSION index 7c28f11013b7..8485c4810bf0 100644 --- a/contrib/bmake/VERSION +++ b/contrib/bmake/VERSION @@ -1,2 +1,2 @@ # keep this compatible with sh and make -_MAKE_VERSION=20210621 +_MAKE_VERSION=20211212 diff --git a/contrib/bmake/_strtol.h b/contrib/bmake/_strtol.h new file mode 100644 index 000000000000..51c71490ae57 --- /dev/null +++ b/contrib/bmake/_strtol.h @@ -0,0 +1,213 @@ +/* $NetBSD: _strtol.h,v 1.11 2017/07/06 21:08:44 joerg Exp $ */ + +/*- + * Copyright (c) 1990, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Original version ID: + * NetBSD: src/lib/libc/locale/_wcstol.h,v 1.2 2003/08/07 16:43:03 agc Exp + */ + +/* + * function template for strtol, strtoll and strtoimax. + * + * parameters: + * _FUNCNAME : function name + * __INT : return type + * __INT_MIN : lower limit of the return type + * __INT_MAX : upper limit of the return type + */ +#if defined(_KERNEL) || defined(_STANDALONE) || defined(HAVE_NBTOOL_CONFIG_H) || defined(BCS_ONLY) +__INT +_FUNCNAME(const char *nptr, char **endptr, int base) +#else +#include +#include "setlocale_local.h" +#define INT_FUNCNAME_(pre, name, post) pre ## name ## post +#define INT_FUNCNAME(pre, name, post) INT_FUNCNAME_(pre, name, post) + +static __INT +INT_FUNCNAME(_int_, _FUNCNAME, _l)(const char *nptr, char **endptr, + int base, locale_t loc) +#endif +{ + const char *s; + __INT acc, cutoff; + unsigned char c; + int i, neg, any, cutlim; + + _DIAGASSERT(nptr != NULL); + /* endptr may be NULL */ + + /* check base value */ + if (base && (base < 2 || base > 36)) { +#if !defined(_KERNEL) && !defined(_STANDALONE) + errno = EINVAL; + if (endptr != NULL) + /* LINTED interface specification */ + *endptr = __UNCONST(nptr); + return 0; +#else + panic("%s: invalid base %d", __func__, base); +#endif + } + + /* + * Skip white space and pick up leading +/- sign if any. + * If base is 0, allow 0x for hex and 0 for octal, else + * assume decimal; if base is already 16, allow 0x. + */ + s = nptr; +#if defined(_KERNEL) || defined(_STANDALONE) || \ + defined(HAVE_NBTOOL_CONFIG_H) || defined(BCS_ONLY) + do { + c = *s++; + } while (isspace(c)); +#else + do { + c = *s++; + } while (isspace_l(c, loc)); +#endif + if (c == '-') { + neg = 1; + c = *s++; + } else { + neg = 0; + if (c == '+') + c = *s++; + } + if ((base == 0 || base == 16) && + c == '0' && (*s == 'x' || *s == 'X') && + ((s[1] >= '0' && s[1] <= '9') || + (s[1] >= 'a' && s[1] <= 'f') || + (s[1] >= 'A' && s[1] <= 'F'))) { + c = s[1]; + s += 2; + base = 16; +#if 0 + } else if ((base == 0 || base == 2) && + c == '0' && (*s == 'b' || *s == 'B') && + (s[1] >= '0' && s[1] <= '1')) { + c = s[1]; + s += 2; + base = 2; +#endif + } else if (base == 0) + base = (c == '0' ? 8 : 10); + + /* + * Compute the cutoff value between legal numbers and illegal + * numbers. That is the largest legal value, divided by the + * base. An input number that is greater than this value, if + * followed by a legal input character, is too big. One that + * is equal to this value may be valid or not; the limit + * between valid and invalid numbers is then based on the last + * digit. For instance, if the range for longs is + * [-2147483648..2147483647] and the input base is 10, + * cutoff will be set to 214748364 and cutlim to either + * 7 (neg==0) or 8 (neg==1), meaning that if we have accumulated + * a value > 214748364, or equal but the next digit is > 7 (or 8), + * the number is too big, and we will return a range error. + * + * Set any if any `digits' consumed; make it negative to indicate + * overflow. + */ + cutoff = (__INT)(neg ? __INT_MIN : __INT_MAX); + cutlim = (int)(cutoff % base); + cutoff /= base; + if (neg) { + if (cutlim > 0) { + cutlim -= base; + cutoff += 1; + } + cutlim = -cutlim; + } + for (acc = 0, any = 0;; c = *s++) { + if (c >= '0' && c <= '9') + i = c - '0'; + else if (c >= 'a' && c <= 'z') + i = (c - 'a') + 10; + else if (c >= 'A' && c <= 'Z') + i = (c - 'A') + 10; + else + break; + if (i >= base) + break; + if (any < 0) + continue; + if (neg) { + if (acc < cutoff || (acc == cutoff && i > cutlim)) { + acc = __INT_MIN; +#if !defined(_KERNEL) && !defined(_STANDALONE) + any = -1; + errno = ERANGE; +#else + any = 0; + break; +#endif + } else { + any = 1; + acc *= base; + acc -= i; + } + } else { + if (acc > cutoff || (acc == cutoff && i > cutlim)) { + acc = __INT_MAX; +#if !defined(_KERNEL) && !defined(_STANDALONE) + any = -1; + errno = ERANGE; +#else + any = 0; + break; +#endif + } else { + any = 1; + acc *= base; + acc += i; + } + } + } + if (endptr != NULL) + /* LINTED interface specification */ + *endptr = __UNCONST(any ? s - 1 : nptr); + return(acc); +} + +#if !defined(_KERNEL) && !defined(_STANDALONE) && \ + !defined(HAVE_NBTOOL_CONFIG_H) && !defined(BCS_ONLY) +__INT +_FUNCNAME(const char *nptr, char **endptr, int base) +{ + return INT_FUNCNAME(_int_, _FUNCNAME, _l)(nptr, endptr, base, _current_locale()); +} + +__INT +INT_FUNCNAME(, _FUNCNAME, _l)(const char *nptr, char **endptr, int base, locale_t loc) +{ + return INT_FUNCNAME(_int_, _FUNCNAME, _l)(nptr, endptr, base, loc); +} +#endif diff --git a/contrib/bmake/arch.c b/contrib/bmake/arch.c index 6d9dd60dfbe9..515713af7af7 100644 --- a/contrib/bmake/arch.c +++ b/contrib/bmake/arch.c @@ -1,1148 +1,1150 @@ -/* $NetBSD: arch.c,v 1.200 2021/05/30 21:16:54 rillig Exp $ */ +/* $NetBSD: arch.c,v 1.205 2021/12/12 22:41:47 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Manipulate libraries, archives and their members. * * The first time an archive is referenced, all of its members' headers are * read and cached and the archive closed again. All cached archives are kept * on a list which is searched each time an archive member is referenced. * * The interface to this module is: * * Arch_Init Initialize this module. * * Arch_End Clean up this module. * * Arch_ParseArchive * Parse an archive specification such as * "archive.a(member1 member2)". * * Arch_Touch Alter the modification time of the archive * member described by the given node to be * the time when make was started. * * Arch_TouchLib Update the modification time of the library * described by the given node. This is special * because it also updates the modification time * of the library's table of contents. * * Arch_UpdateMTime * Find the modification time of a member of * an archive *in the archive* and place it in the * member's GNode. * * Arch_UpdateMemberMTime * Find the modification time of a member of * an archive. Called when the member doesn't * already exist. Looks in the archive for the * modification time. Returns the modification * time. * * Arch_FindLib Search for a library along a path. The * library name in the GNode should be in * -l format. * * Arch_LibOODate Decide if a library node is out-of-date. */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include #include #include #ifdef HAVE_AR_H #include #else struct ar_hdr { char ar_name[16]; /* name */ char ar_date[12]; /* modification time */ char ar_uid[6]; /* user id */ char ar_gid[6]; /* group id */ char ar_mode[8]; /* octal file permissions */ char ar_size[10]; /* size in bytes */ #ifndef ARFMAG #define ARFMAG "`\n" #endif char ar_fmag[2]; /* consistency check */ }; #endif #if defined(HAVE_RANLIB_H) && !(defined(__ELF__) || defined(NO_RANLIB)) #include #endif #ifdef HAVE_UTIME_H #include #endif #include "make.h" #include "dir.h" /* "@(#)arch.c 8.2 (Berkeley) 1/2/94" */ -MAKE_RCSID("$NetBSD: arch.c,v 1.200 2021/05/30 21:16:54 rillig Exp $"); +MAKE_RCSID("$NetBSD: arch.c,v 1.205 2021/12/12 22:41:47 rillig Exp $"); typedef struct List ArchList; typedef struct ListNode ArchListNode; static ArchList archives; /* The archives we've already examined */ typedef struct Arch { char *name; /* Name of archive */ HashTable members; /* All the members of the archive described * by key/value pairs */ char *fnametab; /* Extended name table strings */ size_t fnamesize; /* Size of the string table */ } Arch; static FILE *ArchFindMember(const char *, const char *, struct ar_hdr *, const char *); #if defined(__svr4__) || defined(__SVR4) || defined(__ELF__) #define SVR4ARCHIVES static int ArchSVR4Entry(Arch *, char *, size_t, FILE *); #endif #if defined(_AIX) # define AR_NAME _ar_name.ar_name # define AR_FMAG _ar_name.ar_fmag # define SARMAG SAIAMAG # define ARMAG AIAMAG # define ARFMAG AIAFMAG #endif #ifndef AR_NAME # define AR_NAME ar_name #endif #ifndef AR_DATE # define AR_DATE ar_date #endif #ifndef AR_SIZE # define AR_SIZE ar_size #endif #ifndef AR_FMAG # define AR_FMAG ar_fmag #endif #ifndef ARMAG # define ARMAG "!\n" #endif #ifndef SARMAG # define SARMAG 8 #endif #ifdef CLEANUP static void ArchFree(void *ap) { Arch *a = ap; HashIter hi; /* Free memory from hash entries */ HashIter_Init(&hi, &a->members); while (HashIter_Next(&hi) != NULL) free(hi.entry->value); free(a->name); free(a->fnametab); HashTable_Done(&a->members); free(a); } #endif /* Return "archive(member)". */ static char * FullName(const char *archive, const char *member) { size_t len1 = strlen(archive); size_t len3 = strlen(member); char *result = bmake_malloc(len1 + 1 + len3 + 1 + 1); memcpy(result, archive, len1); memcpy(result + len1, "(", 1); memcpy(result + len1 + 1, member, len3); memcpy(result + len1 + 1 + len3, ")", 1 + 1); return result; } /* * Parse an archive specification such as "archive.a(member1 member2.${EXT})", * adding nodes for the expanded members to gns. Nodes are created as * necessary. * * Input: * pp The start of the specification. * gns The list on which to place the nodes. * scope The scope in which to expand variables. * * Output: * return True if it was a valid specification. * *pp Points to the first non-space after the archive spec. */ bool Arch_ParseArchive(char **pp, GNodeList *gns, GNode *scope) { char *cp; /* Pointer into line */ GNode *gn; /* New node */ MFStr libName; /* Library-part of specification */ - char *memName; /* Member-part of specification */ + FStr mem; /* Member-part of specification */ char saveChar; /* Ending delimiter of member-name */ bool expandLibName; /* Whether the parsed libName contains * variable expressions that need to be * expanded */ libName = MFStr_InitRefer(*pp); expandLibName = false; for (cp = libName.str; *cp != '(' && *cp != '\0';) { if (*cp == '$') { /* Expand nested variable expressions. */ /* XXX: This code can probably be shortened. */ const char *nested_p = cp; FStr result; bool isError; /* XXX: is expanded twice: once here and once below */ (void)Var_Parse(&nested_p, scope, VARE_UNDEFERR, &result); /* TODO: handle errors */ isError = result.str == var_Error; FStr_Done(&result); if (isError) return false; expandLibName = true; cp += nested_p - cp; } else cp++; } *cp++ = '\0'; if (expandLibName) { char *expanded; (void)Var_Subst(libName.str, scope, VARE_UNDEFERR, &expanded); /* TODO: handle errors */ libName = MFStr_InitOwn(expanded); } for (;;) { /* * First skip to the start of the member's name, mark that * place and skip to the end of it (either white-space or * a close paren). */ bool doSubst = false; pp_skip_whitespace(&cp); - memName = cp; + mem = FStr_InitRefer(cp); while (*cp != '\0' && *cp != ')' && !ch_isspace(*cp)) { if (*cp == '$') { /* Expand nested variable expressions. */ /* XXX: This code can probably be shortened. */ FStr result; bool isError; const char *nested_p = cp; (void)Var_Parse(&nested_p, scope, VARE_UNDEFERR, &result); /* TODO: handle errors */ isError = result.str == var_Error; FStr_Done(&result); if (isError) return false; doSubst = true; cp += nested_p - cp; } else { cp++; } } /* * If the specification ends without a closing parenthesis, * chances are there's something wrong (like a missing * backslash), so it's better to return failure than allow * such things to happen */ if (*cp == '\0') { Parse_Error(PARSE_FATAL, "No closing parenthesis " "in archive specification"); return false; } /* * If we didn't move anywhere, we must be done */ - if (cp == memName) + if (cp == mem.str) break; saveChar = *cp; *cp = '\0'; /* * XXX: This should be taken care of intelligently by * SuffExpandChildren, both for the archive and the member * portions. */ /* * If member contains variables, try and substitute for them. * This will slow down archive specs with dynamic sources, of * course, since we'll be (non-)substituting them three * times, but them's the breaks -- we need to do this since * SuffExpandChildren calls us, otherwise we could assume the * thing would be taken care of later. */ if (doSubst) { char *fullName; - char *p; - char *unexpandedMemName = memName; + char *p, *expandedMem; + const char *unexpandedMem = mem.str; - (void)Var_Subst(memName, scope, VARE_UNDEFERR, - &memName); + (void)Var_Subst(mem.str, scope, VARE_UNDEFERR, + &expandedMem); /* TODO: handle errors */ + mem = FStr_InitOwn(expandedMem); /* * Now form an archive spec and recurse to deal with * nested variables and multi-word variable values. */ - fullName = FullName(libName.str, memName); + fullName = FullName(libName.str, mem.str); p = fullName; - if (strchr(memName, '$') != NULL && - strcmp(memName, unexpandedMemName) == 0) { + if (strcmp(mem.str, unexpandedMem) == 0) { /* * Must contain dynamic sources, so we can't * deal with it now. Just create an ARCHV node * for the thing and let SuffExpandChildren * handle it. */ gn = Targ_GetNode(fullName); gn->type |= OP_ARCHV; Lst_Append(gns, gn); } else if (!Arch_ParseArchive(&p, gns, scope)) { /* Error in nested call. */ free(fullName); /* XXX: does unexpandedMemName leak? */ return false; } free(fullName); /* XXX: does unexpandedMemName leak? */ - } else if (Dir_HasWildcards(memName)) { + } else if (Dir_HasWildcards(mem.str)) { StringList members = LST_INIT; - SearchPath_Expand(&dirSearchPath, memName, &members); + SearchPath_Expand(&dirSearchPath, mem.str, &members); while (!Lst_IsEmpty(&members)) { char *member = Lst_Dequeue(&members); char *fullname = FullName(libName.str, member); free(member); gn = Targ_GetNode(fullname); free(fullname); gn->type |= OP_ARCHV; Lst_Append(gns, gn); } Lst_Done(&members); } else { - char *fullname = FullName(libName.str, memName); + char *fullname = FullName(libName.str, mem.str); gn = Targ_GetNode(fullname); free(fullname); /* * We've found the node, but have to make sure the * rest of the world knows it's an archive member, * without having to constantly check for parentheses, * so we type the thing with the OP_ARCHV bit before * we place it on the end of the provided list. */ gn->type |= OP_ARCHV; Lst_Append(gns, gn); } - if (doSubst) - free(memName); + FStr_Done(&mem); *cp = saveChar; } MFStr_Done(&libName); cp++; /* skip the ')' */ /* We promised that pp would be set up at the next non-space. */ pp_skip_whitespace(&cp); *pp = cp; return true; } /* * Locate a member of an archive, given the path of the archive and the path * of the desired member. * * Input: * archive Path to the archive * member Name of member; only its basename is used. * addToCache True if archive should be cached if not already so. * * Results: * The ar_hdr for the member, or NULL. * * See ArchFindMember for an almost identical copy of this code. */ static struct ar_hdr * ArchStatMember(const char *archive, const char *member, bool addToCache) { #define AR_MAX_NAME_LEN (sizeof arh.ar_name - 1) FILE *arch; size_t size; /* Size of archive member */ char magic[SARMAG]; ArchListNode *ln; Arch *ar; /* Archive descriptor */ struct ar_hdr arh; /* archive-member header for reading archive */ char memName[MAXPATHLEN + 1]; /* Current member name while hashing. */ /* * Because of space constraints and similar things, files are archived * using their basename, not the entire path. */ member = str_basename(member); for (ln = archives.first; ln != NULL; ln = ln->next) { const Arch *a = ln->datum; if (strcmp(a->name, archive) == 0) break; } if (ln != NULL) { struct ar_hdr *hdr; ar = ln->datum; hdr = HashTable_FindValue(&ar->members, member); if (hdr != NULL) return hdr; { /* Try truncated name */ char copy[AR_MAX_NAME_LEN + 1]; size_t len = strlen(member); if (len > AR_MAX_NAME_LEN) { snprintf(copy, sizeof copy, "%s", member); hdr = HashTable_FindValue(&ar->members, copy); } return hdr; } } if (!addToCache) { /* * Caller doesn't want the thing cached, just use * ArchFindMember to read the header for the member out and * close down the stream again. Since the archive is not to be * cached, we assume there's no need to allocate extra room * for the header we're returning, so just declare it static. */ static struct ar_hdr sarh; arch = ArchFindMember(archive, member, &sarh, "r"); if (arch == NULL) return NULL; fclose(arch); return &sarh; } /* * We don't have this archive on the list yet, so we want to find out * everything that's in it and cache it so we can get at it quickly. */ arch = fopen(archive, "r"); if (arch == NULL) return NULL; /* * We use the ARMAG string to make sure this is an archive we * can handle... */ if (fread(magic, SARMAG, 1, arch) != 1 || strncmp(magic, ARMAG, SARMAG) != 0) { (void)fclose(arch); return NULL; } ar = bmake_malloc(sizeof *ar); ar->name = bmake_strdup(archive); ar->fnametab = NULL; ar->fnamesize = 0; HashTable_Init(&ar->members); memName[AR_MAX_NAME_LEN] = '\0'; while (fread(&arh, sizeof arh, 1, arch) == 1) { char *nameend; /* If the header is bogus, there's no way we can recover. */ if (strncmp(arh.AR_FMAG, ARFMAG, sizeof arh.AR_FMAG) != 0) goto badarch; /* * We need to advance the stream's pointer to the start of the * next header. Files are padded with newlines to an even-byte * boundary, so we need to extract the size of the file from * the 'size' field of the header and round it up during the * seek. */ arh.AR_SIZE[sizeof arh.AR_SIZE - 1] = '\0'; size = (size_t)strtol(arh.AR_SIZE, NULL, 10); memcpy(memName, arh.AR_NAME, sizeof arh.AR_NAME); nameend = memName + AR_MAX_NAME_LEN; while (nameend > memName && *nameend == ' ') nameend--; nameend[1] = '\0'; #ifdef SVR4ARCHIVES /* * svr4 names are slash-terminated. * Also svr4 extended the AR format. */ if (memName[0] == '/') { /* svr4 magic mode; handle it */ switch (ArchSVR4Entry(ar, memName, size, arch)) { case -1: /* Invalid data */ goto badarch; case 0: /* List of files entry */ continue; default: /* Got the entry */ break; } } else { if (nameend[0] == '/') nameend[0] = '\0'; } #endif #ifdef AR_EFMT1 /* * BSD 4.4 extended AR format: #1/, with name as the * first bytes of the file */ if (strncmp(memName, AR_EFMT1, sizeof AR_EFMT1 - 1) == 0 && ch_isdigit(memName[sizeof AR_EFMT1 - 1])) { - int elen = atoi(memName + sizeof AR_EFMT1 - 1); + size_t elen = atoi(memName + sizeof AR_EFMT1 - 1); - if ((unsigned int)elen > MAXPATHLEN) + if (elen > MAXPATHLEN) goto badarch; - if (fread(memName, (size_t)elen, 1, arch) != 1) + if (fread(memName, elen, 1, arch) != 1) goto badarch; memName[elen] = '\0'; - if (fseek(arch, -elen, SEEK_CUR) != 0) + if (fseek(arch, -(long)elen, SEEK_CUR) != 0) goto badarch; if (DEBUG(ARCH) || DEBUG(MAKE)) debug_printf( "ArchStatMember: " "Extended format entry for %s\n", memName); } #endif { struct ar_hdr *cached_hdr = bmake_malloc( sizeof *cached_hdr); memcpy(cached_hdr, &arh, sizeof arh); HashTable_Set(&ar->members, memName, cached_hdr); } if (fseek(arch, ((long)size + 1) & ~1, SEEK_CUR) != 0) goto badarch; } fclose(arch); Lst_Append(&archives, ar); /* * Now that the archive has been read and cached, we can look into * the addToCache table to find the desired member's header. */ return HashTable_FindValue(&ar->members, member); badarch: fclose(arch); HashTable_Done(&ar->members); free(ar->fnametab); free(ar); return NULL; } #ifdef SVR4ARCHIVES /* * Parse an SVR4 style entry that begins with a slash. * If it is "//", then load the table of filenames. * If it is "/", then try to substitute the long file name * from offset of a table previously read. * If a table is read, the file pointer is moved to the next archive member. * * Results: * -1: Bad data in archive * 0: A table was loaded from the file * 1: Name was successfully substituted from table * 2: Name was not successfully substituted from table */ static int ArchSVR4Entry(Arch *ar, char *inout_name, size_t size, FILE *arch) { #define ARLONGNAMES1 "//" #define ARLONGNAMES2 "/ARFILENAMES" size_t entry; char *ptr, *eptr; if (strncmp(inout_name, ARLONGNAMES1, sizeof ARLONGNAMES1 - 1) == 0 || strncmp(inout_name, ARLONGNAMES2, sizeof ARLONGNAMES2 - 1) == 0) { if (ar->fnametab != NULL) { DEBUG0(ARCH, "Attempted to redefine an SVR4 name table\n"); return -1; } /* * This is a table of archive names, so we build one for * ourselves */ ar->fnametab = bmake_malloc(size); ar->fnamesize = size; if (fread(ar->fnametab, size, 1, arch) != 1) { DEBUG0(ARCH, "Reading an SVR4 name table failed\n"); return -1; } eptr = ar->fnametab + size; for (entry = 0, ptr = ar->fnametab; ptr < eptr; ptr++) if (*ptr == '/') { entry++; *ptr = '\0'; } DEBUG1(ARCH, "Found svr4 archive name table with %lu entries\n", (unsigned long)entry); return 0; } if (inout_name[1] == ' ' || inout_name[1] == '\0') return 2; entry = (size_t)strtol(&inout_name[1], &eptr, 0); if ((*eptr != ' ' && *eptr != '\0') || eptr == &inout_name[1]) { DEBUG1(ARCH, "Could not parse SVR4 name %s\n", inout_name); return 2; } if (entry >= ar->fnamesize) { DEBUG2(ARCH, "SVR4 entry offset %s is greater than %lu\n", inout_name, (unsigned long)ar->fnamesize); return 2; } DEBUG2(ARCH, "Replaced %s with %s\n", inout_name, &ar->fnametab[entry]); snprintf(inout_name, MAXPATHLEN + 1, "%s", &ar->fnametab[entry]); return 1; } #endif static bool ArchiveMember_HasName(const struct ar_hdr *hdr, const char *name, size_t namelen) { const size_t ar_name_len = sizeof hdr->AR_NAME; const char *ar_name = hdr->AR_NAME; if (strncmp(ar_name, name, namelen) != 0) return false; if (namelen >= ar_name_len) return namelen == ar_name_len; /* hdr->AR_NAME is space-padded to the right. */ if (ar_name[namelen] == ' ') return true; /* In archives created by GNU binutils 2.27, the member names end with * a slash. */ if (ar_name[namelen] == '/' && (namelen == ar_name_len || ar_name[namelen + 1] == ' ')) return true; return false; } /* * Locate a member of an archive, given the path of the archive and the path * of the desired member. * * Input: * archive Path to the archive * member Name of member. If it is a path, only the last * component is used. * out_arh Archive header to be filled in * mode "r" for read-only access, "r+" for read-write access * * Output: * return The archive file, positioned at the start of the * member's struct ar_hdr, or NULL if the member doesn't * exist. * *out_arh The current struct ar_hdr for member. * * See ArchStatMember for an almost identical copy of this code. */ static FILE * ArchFindMember(const char *archive, const char *member, struct ar_hdr *out_arh, const char *mode) { FILE *arch; /* Stream to archive */ int size; /* Size of archive member */ char magic[SARMAG]; size_t len; arch = fopen(archive, mode); if (arch == NULL) return NULL; /* * We use the ARMAG string to make sure this is an archive we * can handle... */ if (fread(magic, SARMAG, 1, arch) != 1 || strncmp(magic, ARMAG, SARMAG) != 0) { fclose(arch); return NULL; } /* * Because of space constraints and similar things, files are archived * using their basename, not the entire path. */ member = str_basename(member); len = strlen(member); while (fread(out_arh, sizeof *out_arh, 1, arch) == 1) { if (strncmp(out_arh->AR_FMAG, ARFMAG, sizeof out_arh->AR_FMAG) != 0) { /* * The header is bogus, so the archive is bad * and there's no way we can recover... */ fclose(arch); return NULL; } DEBUG5(ARCH, "Reading archive %s member %.*s mtime %.*s\n", archive, (int)sizeof out_arh->AR_NAME, out_arh->AR_NAME, (int)sizeof out_arh->ar_date, out_arh->ar_date); if (ArchiveMember_HasName(out_arh, member, len)) { /* * To make life easier for callers that want to update * the archive, we reposition the file at the start of * the header we just read before we return the * stream. In a more general situation, it might be * better to leave the file at the actual member, * rather than its header, but not here. */ if (fseek(arch, -(long)sizeof *out_arh, SEEK_CUR) != 0) { fclose(arch); return NULL; } return arch; } #ifdef AR_EFMT1 /* * BSD 4.4 extended AR format: #1/, with name as the * first bytes of the file */ if (strncmp(out_arh->AR_NAME, AR_EFMT1, sizeof AR_EFMT1 - 1) == 0 && (ch_isdigit(out_arh->AR_NAME[sizeof AR_EFMT1 - 1]))) { - int elen = atoi(&out_arh->AR_NAME[sizeof AR_EFMT1 - 1]); + size_t elen = atoi( + &out_arh->AR_NAME[sizeof AR_EFMT1 - 1]); char ename[MAXPATHLEN + 1]; - if ((unsigned int)elen > MAXPATHLEN) { + if (elen > MAXPATHLEN) { fclose(arch); return NULL; } - if (fread(ename, (size_t)elen, 1, arch) != 1) { + if (fread(ename, elen, 1, arch) != 1) { fclose(arch); return NULL; } ename[elen] = '\0'; if (DEBUG(ARCH) || DEBUG(MAKE)) debug_printf( "ArchFindMember: " "Extended format entry for %s\n", ename); if (strncmp(ename, member, len) == 0) { /* Found as extended name */ if (fseek(arch, - -(long)sizeof(struct ar_hdr) - elen, - SEEK_CUR) != 0) { + -(long)(sizeof(struct ar_hdr) - elen), + SEEK_CUR) != 0) { fclose(arch); return NULL; } return arch; } - if (fseek(arch, -elen, SEEK_CUR) != 0) { + if (fseek(arch, -(long)elen, SEEK_CUR) != 0) { fclose(arch); return NULL; } } #endif /* * This isn't the member we're after, so we need to advance the * stream's pointer to the start of the next header. Files are * padded with newlines to an even-byte boundary, so we need to * extract the size of the file from the 'size' field of the * header and round it up during the seek. */ out_arh->AR_SIZE[sizeof out_arh->AR_SIZE - 1] = '\0'; size = (int)strtol(out_arh->AR_SIZE, NULL, 10); - if (fseek(arch, (size + 1) & ~1, SEEK_CUR) != 0) { + if (fseek(arch, (size + 1) & ~1L, SEEK_CUR) != 0) { fclose(arch); return NULL; } } fclose(arch); return NULL; } /* * Touch a member of an archive, on disk. * The GNode's modification time is left as-is. * * The st_mtime of the entire archive is also changed. * For a library, it may be required to run ranlib after this. * * Input: * gn Node of member to touch * * Results: * The 'time' field of the member's header is updated. */ void Arch_Touch(GNode *gn) { FILE *f; struct ar_hdr arh; f = ArchFindMember(GNode_VarArchive(gn), GNode_VarMember(gn), &arh, "r+"); if (f == NULL) return; snprintf(arh.ar_date, sizeof arh.ar_date, "%-ld", (unsigned long)now); (void)fwrite(&arh, sizeof arh, 1, f); fclose(f); /* TODO: handle errors */ } /* * Given a node which represents a library, touch the thing, making sure that * the table of contents is also touched. * * Both the modification time of the library and of the RANLIBMAG member are * set to 'now'. */ /*ARGSUSED*/ void Arch_TouchLib(GNode *gn MAKE_ATTR_UNUSED) { #ifdef RANLIBMAG FILE *f; struct ar_hdr arh; /* Header describing table of contents */ struct utimbuf times; f = ArchFindMember(gn->path, RANLIBMAG, &arh, "r+"); if (f == NULL) return; snprintf(arh.ar_date, sizeof arh.ar_date, "%-ld", (unsigned long)now); (void)fwrite(&arh, sizeof arh, 1, f); fclose(f); /* TODO: handle errors */ times.actime = times.modtime = now; utime(gn->path, ×); /* TODO: handle errors */ #endif } /* * Update the mtime of the GNode with the mtime from the archive member on * disk (or in the cache). */ void Arch_UpdateMTime(GNode *gn) { struct ar_hdr *arh; arh = ArchStatMember(GNode_VarArchive(gn), GNode_VarMember(gn), true); if (arh != NULL) gn->mtime = (time_t)strtol(arh->ar_date, NULL, 10); else gn->mtime = 0; } /* * Given a nonexistent archive member's node, update gn->mtime from its * archived form, if it exists. */ void Arch_UpdateMemberMTime(GNode *gn) { GNodeListNode *ln; for (ln = gn->parents.first; ln != NULL; ln = ln->next) { GNode *pgn = ln->datum; if (pgn->type & OP_ARCHV) { /* * If the parent is an archive specification and is * being made and its member's name matches the name * of the node we were given, record the modification * time of the parent in the child. We keep searching * its parents in case some other parent requires this * child to exist. */ const char *nameStart = strchr(pgn->name, '(') + 1; const char *nameEnd = strchr(nameStart, ')'); size_t nameLen = (size_t)(nameEnd - nameStart); - if ((pgn->flags & REMAKE) && + if (pgn->flags.remake && strncmp(nameStart, gn->name, nameLen) == 0) { Arch_UpdateMTime(pgn); gn->mtime = pgn->mtime; } - } else if (pgn->flags & REMAKE) { + } else if (pgn->flags.remake) { /* * Something which isn't a library depends on the * existence of this target, so it needs to exist. */ gn->mtime = 0; break; } } } /* * Search for a library along the given search path. * * The node's 'path' field is set to the found path (including the * actual file name, not -l...). If the system can handle the -L * flag when linking (or we cannot find the library), we assume that * the user has placed the .LIBS variable in the final linking * command (or the linker will know where to find it) and set the * TARGET variable for this node to be the node's name. Otherwise, * we set the TARGET variable to be the full path of the library, * as returned by Dir_FindFile. * * Input: * gn Node of library to find */ void Arch_FindLib(GNode *gn, SearchPath *path) { char *libName = str_concat3("lib", gn->name + 2, ".a"); gn->path = Dir_FindFile(libName, path); free(libName); #ifdef LIBRARIES Var_Set(gn, TARGET, gn->name); #else Var_Set(gn, TARGET, GNode_Path(gn)); #endif } +/* ARGSUSED */ +static bool +RanlibOODate(const GNode *gn MAKE_ATTR_UNUSED) +{ +#ifdef RANLIBMAG + struct ar_hdr *arh; /* Header for __.SYMDEF */ + int tocModTime; /* The table-of-contents' mod time */ + + arh = ArchStatMember(gn->path, RANLIBMAG, false); + + if (arh == NULL) { + /* A library without a table of contents is out-of-date. */ + if (DEBUG(ARCH) || DEBUG(MAKE)) + debug_printf("no toc..."); + return true; + } + + tocModTime = (int)strtol(arh->ar_date, NULL, 10); + + if (DEBUG(ARCH) || DEBUG(MAKE)) + debug_printf("%s modified %s...", + RANLIBMAG, Targ_FmtTime(tocModTime)); + return gn->youngestChild == NULL || + gn->youngestChild->mtime > tocModTime; +#else + return false; +#endif +} + /* * Decide if a node with the OP_LIB attribute is out-of-date. Called from * GNode_IsOODate to make its life easier. * The library is cached if it hasn't been already. * * There are several ways for a library to be out-of-date that are * not available to ordinary files. In addition, there are ways * that are open to regular files that are not available to * libraries. * * A library that is only used as a source is never * considered out-of-date by itself. This does not preclude the * library's modification time from making its parent be out-of-date. * A library will be considered out-of-date for any of these reasons, * given that it is a target on a dependency line somewhere: * * Its modification time is less than that of one of its sources * (gn->mtime < gn->youngestChild->mtime). * * Its modification time is greater than the time at which the make * began (i.e. it's been modified in the course of the make, probably * by archiving). * * The modification time of one of its sources is greater than the one * of its RANLIBMAG member (i.e. its table of contents is out-of-date). * We don't compare the archive time vs. TOC time because they can be * too close. In my opinion we should not bother with the TOC at all * since this is used by 'ar' rules that affect the data contents of the * archive, not by ranlib rules, which affect the TOC. */ bool Arch_LibOODate(GNode *gn) { - bool oodate; if (gn->type & OP_PHONY) { - oodate = true; + return true; } else if (!GNode_IsTarget(gn) && Lst_IsEmpty(&gn->children)) { - oodate = false; + return false; } else if ((!Lst_IsEmpty(&gn->children) && gn->youngestChild == NULL) || (gn->mtime > now) || (gn->youngestChild != NULL && gn->mtime < gn->youngestChild->mtime)) { - oodate = true; + return true; } else { -#ifdef RANLIBMAG - struct ar_hdr *arh; /* Header for __.SYMDEF */ - int modTimeTOC; /* The table-of-contents' mod time */ - - arh = ArchStatMember(gn->path, RANLIBMAG, false); - - if (arh != NULL) { - modTimeTOC = (int)strtol(arh->ar_date, NULL, 10); - - if (DEBUG(ARCH) || DEBUG(MAKE)) - debug_printf("%s modified %s...", - RANLIBMAG, - Targ_FmtTime(modTimeTOC)); - oodate = gn->youngestChild == NULL || - gn->youngestChild->mtime > modTimeTOC; - } else { - /* - * A library without a table of contents is out-of-date. - */ - if (DEBUG(ARCH) || DEBUG(MAKE)) - debug_printf("no toc..."); - oodate = true; - } -#else - oodate = false; -#endif + return RanlibOODate(gn); } - return oodate; } /* Initialize the archives module. */ void Arch_Init(void) { Lst_Init(&archives); } /* Clean up the archives module. */ void Arch_End(void) { #ifdef CLEANUP Lst_DoneCall(&archives, ArchFree); #endif } bool Arch_IsLib(GNode *gn) { static const char armag[] = "!\n"; char buf[sizeof armag - 1]; int fd; if ((fd = open(gn->path, O_RDONLY)) == -1) return false; if (read(fd, buf, sizeof buf) != sizeof buf) { (void)close(fd); return false; } (void)close(fd); return memcmp(buf, armag, sizeof buf) == 0; } diff --git a/contrib/bmake/bmake.1 b/contrib/bmake/bmake.1 index e0d8267994c1..daea73cf538d 100644 --- a/contrib/bmake/bmake.1 +++ b/contrib/bmake/bmake.1 @@ -1,2474 +1,2489 @@ -.\" $NetBSD: make.1,v 1.296 2021/02/04 21:42:46 rillig Exp $ +.\" $NetBSD: make.1,v 1.300 2021/12/12 20:45:48 sjg Exp $ .\" .\" Copyright (c) 1990, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" from: @(#)make.1 8.4 (Berkeley) 3/19/94 .\" -.Dd December 22, 2020 +.Dd December 12, 2021 .Dt BMAKE 1 .Os .Sh NAME .Nm bmake .Nd maintain program dependencies .Sh SYNOPSIS .Nm .Op Fl BeikNnqrSstWwX .Op Fl C Ar directory .Op Fl D Ar variable .Op Fl d Ar flags .Op Fl f Ar makefile .Op Fl I Ar directory .Op Fl J Ar private .Op Fl j Ar max_jobs .Op Fl m Ar directory .Op Fl T Ar file .Op Fl V Ar variable .Op Fl v Ar variable .Op Ar variable=value .Op Ar target ... .Sh DESCRIPTION .Nm is a program designed to simplify the maintenance of other programs. Its input is a list of specifications as to the files upon which programs and other files depend. If no .Fl f Ar makefile makefile option is given, .Nm will try to open .Ql Pa makefile then .Ql Pa Makefile in order to find the specifications. If the file .Ql Pa .depend exists, it is read (see .Xr mkdep 1 ) . .Pp This manual page is intended as a reference document only. For a more thorough description of .Nm and makefiles, please refer to .%T "PMake \- A Tutorial" . .Pp .Nm will prepend the contents of the .Va MAKEFLAGS environment variable to the command line arguments before parsing them. .Pp The options are as follows: .Bl -tag -width Ds .It Fl B Try to be backwards compatible by executing a single shell per command and by executing the commands to make the sources of a dependency line in sequence. .It Fl C Ar directory Change to .Ar directory before reading the makefiles or doing anything else. If multiple .Fl C options are specified, each is interpreted relative to the previous one: .Fl C Pa / Fl C Pa etc is equivalent to .Fl C Pa /etc . .It Fl D Ar variable Define .Ar variable to be 1, in the global scope. .It Fl d Ar [-]flags Turn on debugging, and specify which portions of .Nm are to print debugging information. Unless the flags are preceded by .Ql \- they are added to the .Va MAKEFLAGS environment variable and will be processed by any child make processes. By default, debugging information is printed to standard error, but this can be changed using the .Ar F debugging flag. The debugging output is always unbuffered; in addition, if debugging is enabled but debugging output is not directed to standard output, then the standard output is line buffered. .Ar Flags is one or more of the following: .Bl -tag -width Ds .It Ar A Print all possible debugging information; equivalent to specifying all of the debugging flags. .It Ar a Print debugging information about archive searching and caching. .It Ar C Print debugging information about current working directory. .It Ar c Print debugging information about conditional evaluation. .It Ar d Print debugging information about directory searching and caching. .It Ar e Print debugging information about failed commands and targets. .It Ar F Ns Oo Sy \&+ Oc Ns Ar filename Specify where debugging output is written. This must be the last flag, because it consumes the remainder of the argument. If the character immediately after the .Ql F flag is .Ql \&+ , then the file will be opened in append mode; otherwise the file will be overwritten. If the file name is .Ql stdout or .Ql stderr then debugging output will be written to the standard output or standard error output file descriptors respectively (and the .Ql \&+ option has no effect). Otherwise, the output will be written to the named file. If the file name ends .Ql .%d then the .Ql %d is replaced by the pid. .It Ar f Print debugging information about loop evaluation. .It Ar "g1" Print the input graph before making anything. .It Ar "g2" Print the input graph after making everything, or before exiting on error. .It Ar "g3" Print the input graph before exiting on error. .It Ar h Print debugging information about hash table operations. .It Ar j Print debugging information about running multiple shells. .It Ar L Turn on lint checks. This will throw errors for variable assignments that do not parse correctly, at the time of assignment so the file and line number are available. .It Ar l Print commands in Makefiles regardless of whether or not they are prefixed by .Ql @ or other "quiet" flags. Also known as "loud" behavior. .It Ar M Print debugging information about "meta" mode decisions about targets. .It Ar m Print debugging information about making targets, including modification dates. .It Ar n Don't delete the temporary command scripts created when running commands. These temporary scripts are created in the directory referred to by the .Ev TMPDIR environment variable, or in .Pa /tmp if .Ev TMPDIR is unset or set to the empty string. The temporary scripts are created by .Xr mkstemp 3 , and have names of the form .Pa makeXXXXXX . .Em NOTE : This can create many files in .Ev TMPDIR or .Pa /tmp , so use with care. .It Ar p Print debugging information about makefile parsing. .It Ar s Print debugging information about suffix-transformation rules. .It Ar t Print debugging information about target list maintenance. .It Ar V Force the .Fl V option to print raw values of variables, overriding the default behavior set via .Va .MAKE.EXPAND_VARIABLES . .It Ar v Print debugging information about variable assignment. .It Ar x Run shell commands with .Fl x so the actual commands are printed as they are executed. .El .It Fl e Specify that environment variables override macro assignments within makefiles. .It Fl f Ar makefile Specify a makefile to read instead of the default .Ql Pa makefile . If .Ar makefile is .Ql Fl , standard input is read. Multiple makefiles may be specified, and are read in the order specified. .It Fl I Ar directory Specify a directory in which to search for makefiles and included makefiles. The system makefile directory (or directories, see the .Fl m option) is automatically included as part of this list. .It Fl i Ignore non-zero exit of shell commands in the makefile. Equivalent to specifying .Ql Fl before each command line in the makefile. .It Fl J Ar private This option should .Em not be specified by the user. .Pp When the .Ar j option is in use in a recursive build, this option is passed by a make to child makes to allow all the make processes in the build to cooperate to avoid overloading the system. .It Fl j Ar max_jobs Specify the maximum number of jobs that .Nm may have running at any one time. The value is saved in .Va .MAKE.JOBS . Turns compatibility mode off, unless the .Ar B flag is also specified. When compatibility mode is off, all commands associated with a target are executed in a single shell invocation as opposed to the traditional one shell invocation per line. This can break traditional scripts which change directories on each command invocation and then expect to start with a fresh environment on the next line. It is more efficient to correct the scripts rather than turn backwards compatibility on. .It Fl k Continue processing after errors are encountered, but only on those targets that do not depend on the target whose creation caused the error. .It Fl m Ar directory Specify a directory in which to search for sys.mk and makefiles included via the .Li \&< Ns Ar file Ns Li \&> Ns -style include statement. The .Fl m option can be used multiple times to form a search path. This path will override the default system include path: /usr/share/mk. Furthermore the system include path will be appended to the search path used for .Li \*q Ns Ar file Ns Li \*q Ns -style include statements (see the .Fl I option). .Pp If a file or directory name in the .Fl m argument (or the .Ev MAKESYSPATH environment variable) starts with the string .Qq \&.../ then .Nm will search for the specified file or directory named in the remaining part of the argument string. The search starts with the current directory of the Makefile and then works upward towards the root of the file system. If the search is successful, then the resulting directory replaces the .Qq \&.../ specification in the .Fl m argument. If used, this feature allows .Nm to easily search in the current source tree for customized sys.mk files (e.g., by using .Qq \&.../mk/sys.mk as an argument). .It Fl n Display the commands that would have been executed, but do not actually execute them unless the target depends on the .MAKE special source (see below) or the command is prefixed with .Ql Ic + . .It Fl N Display the commands which would have been executed, but do not actually execute any of them; useful for debugging top-level makefiles without descending into subdirectories. .It Fl q Do not execute any commands, but exit 0 if the specified targets are up-to-date and 1, otherwise. .It Fl r Do not use the built-in rules specified in the system makefile. .It Fl S Stop processing if an error is encountered. This is the default behavior and the opposite of .Fl k . .It Fl s Do not echo any commands as they are executed. Equivalent to specifying .Ql Ic @ before each command line in the makefile. .It Fl T Ar tracefile When used with the .Fl j flag, append a trace record to .Ar tracefile for each job started and completed. .It Fl t Rather than re-building a target as specified in the makefile, create it or update its modification time to make it appear up-to-date. .It Fl V Ar variable Print the value of .Ar variable . Do not build any targets. Multiple instances of this option may be specified; the variables will be printed one per line, with a blank line for each null or undefined variable. The value printed is extracted from the global scope after all makefiles have been read. By default, the raw variable contents (which may include additional unexpanded variable references) are shown. If .Ar variable contains a .Ql \&$ then the value will be recursively expanded to its complete resultant text before printing. The expanded value will also be printed if .Va .MAKE.EXPAND_VARIABLES is set to true and the .Fl dV option has not been used to override it. Note that loop-local and target-local variables, as well as values taken temporarily by global variables during makefile processing, are not accessible via this option. The .Fl dv debug mode can be used to see these at the cost of generating substantial extraneous output. .It Fl v Ar variable Like .Fl V but the variable is always expanded to its complete value. .It Fl W Treat any warnings during makefile parsing as errors. .It Fl w Print entering and leaving directory messages, pre and post processing. .It Fl X Don't export variables passed on the command line to the environment individually. Variables passed on the command line are still exported via the .Va MAKEFLAGS environment variable. This option may be useful on systems which have a small limit on the size of command arguments. .It Ar variable=value Set the value of the variable .Ar variable to .Ar value . Normally, all values passed on the command line are also exported to sub-makes in the environment. The .Fl X flag disables this behavior. Variable assignments should follow options for POSIX compatibility but no ordering is enforced. .El .Pp There are seven different types of lines in a makefile: file dependency specifications, shell commands, variable assignments, include statements, conditional directives, for loops, and comments. .Pp In general, lines may be continued from one line to the next by ending them with a backslash .Pq Ql \e . The trailing newline character and initial whitespace on the following line are compressed into a single space. .Sh FILE DEPENDENCY SPECIFICATIONS Dependency lines consist of one or more targets, an operator, and zero or more sources. This creates a relationship where the targets .Dq depend on the sources and are customarily created from them. A target is considered out-of-date if it does not exist, or if its modification time is less than that of any of its sources. An out-of-date target will be re-created, but not until all sources have been examined and themselves re-created as needed. Three operators may be used: .Bl -tag -width flag .It Ic \&: Many dependency lines may name this target but only one may have attached shell commands. All sources named in all dependency lines are considered together, and if needed the attached shell commands are run to create or re-create the target. If .Nm is interrupted, the target is removed. .It Ic \&! The same, but the target is always re-created whether or not it is out of date. .It Ic \&:: Any dependency line may have attached shell commands, but each one is handled independently: its sources are considered and the attached shell commands are run if the target is out of date with respect to (only) those sources. Thus, different groups of the attached shell commands may be run depending on the circumstances. Furthermore, unlike .Ic \&:, for dependency lines with no sources, the attached shell commands are always run. Also unlike .Ic \&:, the target will not be removed if .Nm is interrupted. .El All dependency lines mentioning a particular target must use the same operator. .Pp Targets and sources may contain the shell wildcard values .Ql \&? , .Ql * , .Ql [] , and .Ql {} . The values .Ql \&? , .Ql * , and .Ql [] may only be used as part of the final component of the target or source, and must be used to describe existing files. The value .Ql {} need not necessarily be used to describe existing files. Expansion is in directory order, not alphabetically as done in the shell. .Sh SHELL COMMANDS Each target may have associated with it one or more lines of shell commands, normally used to create the target. Each of the lines in this script .Em must be preceded by a tab. (For historical reasons, spaces are not accepted.) While targets can appear in many dependency lines if desired, by default only one of these rules may be followed by a creation script. If the .Ql Ic \&:: operator is used, however, all rules may include scripts and the scripts are executed in the order found. .Pp Each line is treated as a separate shell command, unless the end of line is escaped with a backslash .Pq Ql \e in which case that line and the next are combined. .\" The escaped newline is retained and passed to the shell, which .\" normally ignores it. .\" However, the tab at the beginning of the following line is removed. If the first characters of the command are any combination of .Ql Ic @ , .Ql Ic + , or .Ql Ic \- , the command is treated specially. A .Ql Ic @ causes the command not to be echoed before it is executed. A .Ql Ic + causes the command to be executed even when .Fl n is given. This is similar to the effect of the .MAKE special source, except that the effect can be limited to a single line of a script. A .Ql Ic \- in compatibility mode causes any non-zero exit status of the command line to be ignored. .Pp When .Nm is run in jobs mode with .Fl j Ar max_jobs , the entire script for the target is fed to a single instance of the shell. In compatibility (non-jobs) mode, each command is run in a separate process. If the command contains any shell meta characters .Pq Ql #=|^(){};&<>*?[]:$`\e\en it will be passed to the shell; otherwise .Nm will attempt direct execution. If a line starts with .Ql Ic \- and the shell has ErrCtl enabled then failure of the command line will be ignored as in compatibility mode. Otherwise .Ql Ic \- affects the entire job; the script will stop at the first command line that fails, but the target will not be deemed to have failed. .Pp Makefiles should be written so that the mode of .Nm operation does not change their behavior. For example, any command which needs to use .Dq cd or .Dq chdir without potentially changing the directory for subsequent commands should be put in parentheses so it executes in a subshell. To force the use of one shell, escape the line breaks so as to make the whole script one command. For example: .Bd -literal -offset indent avoid-chdir-side-effects: @echo Building $@ in `pwd` @(cd ${.CURDIR} && ${MAKE} $@) @echo Back in `pwd` ensure-one-shell-regardless-of-mode: @echo Building $@ in `pwd`; \e (cd ${.CURDIR} && ${MAKE} $@); \e echo Back in `pwd` .Ed .Pp Since .Nm will .Xr chdir 2 to .Ql Va .OBJDIR before executing any targets, each child process starts with that as its current working directory. .Sh VARIABLE ASSIGNMENTS Variables in make are much like variables in the shell, and, by tradition, consist of all upper-case letters. .Ss Variable assignment modifiers The five operators that can be used to assign values to variables are as follows: .Bl -tag -width Ds .It Ic \&= Assign the value to the variable. Any previous value is overridden. .It Ic \&+= Append the value to the current value of the variable. .It Ic \&?= Assign the value to the variable if it is not already defined. .It Ic \&:= Assign with expansion, i.e. expand the value before assigning it to the variable. Normally, expansion is not done until the variable is referenced. .Em NOTE : References to undefined variables are .Em not expanded. This can cause problems when variable modifiers are used. .It Ic \&!= Expand the value and pass it to the shell for execution and assign the result to the variable. Any newlines in the result are replaced with spaces. .El .Pp Any white-space before the assigned .Ar value is removed; if the value is being appended, a single space is inserted between the previous contents of the variable and the appended value. .Pp Variables are expanded by surrounding the variable name with either curly braces .Pq Ql {} or parentheses .Pq Ql () and preceding it with a dollar sign .Pq Ql \&$ . If the variable name contains only a single letter, the surrounding braces or parentheses are not required. This shorter form is not recommended. .Pp If the variable name contains a dollar, then the name itself is expanded first. This allows almost arbitrary variable names, however names containing dollar, braces, parentheses, or whitespace are really best avoided! .Pp If the result of expanding a variable contains a dollar sign .Pq Ql \&$ the string is expanded again. .Pp Variable substitution occurs at three distinct times, depending on where the variable is being used. .Bl -enum .It Variables in dependency lines are expanded as the line is read. .It Variables in shell commands are expanded when the shell command is executed. .It .Dq .for loop index variables are expanded on each loop iteration. Note that other variables are not expanded inside loops so the following example code: .Bd -literal -offset indent .Dv .for i in 1 2 3 a+= ${i} j= ${i} b+= ${j} .Dv .endfor all: @echo ${a} @echo ${b} .Ed will print: .Bd -literal -offset indent 1 2 3 3 3 3 .Ed Because while ${a} contains .Dq 1 2 3 after the loop is executed, ${b} contains .Dq ${j} ${j} ${j} which expands to .Dq 3 3 3 since after the loop completes ${j} contains .Dq 3 . .El .Ss Variable classes The four different classes of variables (in order of increasing precedence) are: .Bl -tag -width Ds .It Environment variables Variables defined as part of .Nm Ns 's environment. .It Global variables Variables defined in the makefile or in included makefiles. .It Command line variables Variables defined as part of the command line. .It Local variables Variables that are defined specific to a certain target. .El .Pp Local variables are all built in and their values vary magically from target to target. It is not currently possible to define new local variables. The seven local variables are as follows: .Bl -tag -width ".ARCHIVE" -offset indent .It Va .ALLSRC The list of all sources for this target; also known as .Ql Va \&> . .It Va .ARCHIVE The name of the archive file; also known as .Ql Va \&! . .It Va .IMPSRC In suffix-transformation rules, the name/path of the source from which the target is to be transformed (the .Dq implied source); also known as .Ql Va \&< . It is not defined in explicit rules. .It Va .MEMBER The name of the archive member; also known as .Ql Va % . .It Va .OODATE The list of sources for this target that were deemed out-of-date; also known as .Ql Va \&? . .It Va .PREFIX The file prefix of the target, containing only the file portion, no suffix or preceding directory components; also known as .Ql Va * . The suffix must be one of the known suffixes declared with .Ic .SUFFIXES or it will not be recognized. .It Va .TARGET The name of the target; also known as .Ql Va @ . For compatibility with other makes this is an alias for .Ic .ARCHIVE in archive member rules. .El .Pp The shorter forms .Ql ( Va > , .Ql Va \&! , .Ql Va < , .Ql Va % , .Ql Va \&? , .Ql Va * , and .Ql Va @ ) are permitted for backward compatibility with historical makefiles and legacy POSIX make and are not recommended. .Pp Variants of these variables with the punctuation followed immediately by .Ql D or .Ql F , e.g. .Ql Va $(@D) , are legacy forms equivalent to using the .Ql :H and .Ql :T modifiers. These forms are accepted for compatibility with .At V makefiles and POSIX but are not recommended. .Pp Four of the local variables may be used in sources on dependency lines because they expand to the proper value for each target on the line. These variables are .Ql Va .TARGET , .Ql Va .PREFIX , .Ql Va .ARCHIVE , and .Ql Va .MEMBER . .Ss Additional built-in variables In addition, .Nm sets or knows about the following variables: .Bl -tag -width .MAKEOVERRIDES .It Va \&$ A single dollar sign .Ql \&$ , i.e. .Ql \&$$ expands to a single dollar sign. .It Va .ALLTARGETS The list of all targets encountered in the Makefile. If evaluated during Makefile parsing, lists only those targets encountered thus far. .It Va .CURDIR A path to the directory where .Nm was executed. Refer to the description of .Ql Ev PWD for more details. .It Va .INCLUDEDFROMDIR The directory of the file this Makefile was included from. .It Va .INCLUDEDFROMFILE The filename of the file this Makefile was included from. .It Ev MAKE The name that .Nm was executed with .Pq Va argv[0] . For compatibility .Nm also sets .Va .MAKE with the same value. The preferred variable to use is the environment variable .Ev MAKE because it is more compatible with other versions of .Nm and cannot be confused with the special target with the same name. .It Va .MAKE.DEPENDFILE Names the makefile (default .Ql Pa .depend ) from which generated dependencies are read. .It Va .MAKE.EXPAND_VARIABLES A boolean that controls the default behavior of the .Fl V option. If true, variable values printed with .Fl V are fully expanded; if false, the raw variable contents (which may include additional unexpanded variable references) are shown. .It Va .MAKE.EXPORTED The list of variables exported by .Nm . .It Va .MAKE.JOBS The argument to the .Fl j option. .It Va .MAKE.JOB.PREFIX If .Nm is run with .Ar j then output for each target is prefixed with a token .Ql --- target --- the first part of which can be controlled via .Va .MAKE.JOB.PREFIX . If .Va .MAKE.JOB.PREFIX is empty, no token is printed. .br For example: .Li .MAKE.JOB.PREFIX=${.newline}---${.MAKE:T}[${.MAKE.PID}] would produce tokens like .Ql ---make[1234] target --- making it easier to track the degree of parallelism being achieved. .It Ev MAKEFLAGS The environment variable .Ql Ev MAKEFLAGS may contain anything that may be specified on .Nm Ns 's command line. Anything specified on .Nm Ns 's command line is appended to the .Ql Ev MAKEFLAGS variable which is then entered into the environment for all programs which .Nm executes. .It Va .MAKE.LEVEL The recursion depth of .Nm . The initial instance of .Nm will be 0, and an incremented value is put into the environment to be seen by the next generation. This allows tests like: .Li .if ${.MAKE.LEVEL} == 0 to protect things which should only be evaluated in the initial instance of .Nm . .It Va .MAKE.MAKEFILE_PREFERENCE The ordered list of makefile names (default .Ql Pa makefile , .Ql Pa Makefile ) that .Nm will look for. .It Va .MAKE.MAKEFILES The list of makefiles read by .Nm , which is useful for tracking dependencies. Each makefile is recorded only once, regardless of the number of times read. .It Va .MAKE.MODE Processed after reading all makefiles. Can affect the mode that .Nm runs in. It can contain a number of keywords: .Bl -hang -width missing-filemon=bf. .It Pa compat Like .Fl B , puts .Nm into "compat" mode. .It Pa meta Puts .Nm into "meta" mode, where meta files are created for each target to capture the command run, the output generated and if .Xr filemon 4 is available, the system calls which are of interest to .Nm . The captured output can be very useful when diagnosing errors. .It Pa curdirOk= Ar bf Normally .Nm will not create .meta files in .Ql Va .CURDIR . This can be overridden by setting .Va bf to a value which represents True. .It Pa missing-meta= Ar bf If .Va bf is True, then a missing .meta file makes the target out-of-date. .It Pa missing-filemon= Ar bf If .Va bf is True, then missing filemon data makes the target out-of-date. .It Pa nofilemon Do not use .Xr filemon 4 . .It Pa env For debugging, it can be useful to include the environment in the .meta file. .It Pa verbose If in "meta" mode, print a clue about the target being built. This is useful if the build is otherwise running silently. The message printed the value of: .Va .MAKE.META.PREFIX . .It Pa ignore-cmd Some makefiles have commands which are simply not stable. This keyword causes them to be ignored for determining whether a target is out of date in "meta" mode. See also .Ic .NOMETA_CMP . .It Pa silent= Ar bf If .Va bf is True, when a .meta file is created, mark the target .Ic .SILENT . .El .It Va .MAKE.META.BAILIWICK In "meta" mode, provides a list of prefixes which match the directories controlled by .Nm . If a file that was generated outside of .Va .OBJDIR but within said bailiwick is missing, the current target is considered out-of-date. .It Va .MAKE.META.CREATED In "meta" mode, this variable contains a list of all the meta files updated. If not empty, it can be used to trigger processing of .Va .MAKE.META.FILES . .It Va .MAKE.META.FILES In "meta" mode, this variable contains a list of all the meta files used (updated or not). This list can be used to process the meta files to extract dependency information. .It Va .MAKE.META.IGNORE_PATHS Provides a list of path prefixes that should be ignored; because the contents are expected to change over time. The default list includes: .Ql Pa /dev /etc /proc /tmp /var/run /var/tmp .It Va .MAKE.META.IGNORE_PATTERNS Provides a list of patterns to match against pathnames. Ignore any that match. .It Va .MAKE.META.IGNORE_FILTER Provides a list of variable modifiers to apply to each pathname. Ignore if the expansion is an empty string. .It Va .MAKE.META.PREFIX Defines the message printed for each meta file updated in "meta verbose" mode. The default value is: .Dl Building ${.TARGET:H:tA}/${.TARGET:T} .It Va .MAKEOVERRIDES This variable is used to record the names of variables assigned to on the command line, so that they may be exported as part of .Ql Ev MAKEFLAGS . This behavior can be disabled by assigning an empty value to .Ql Va .MAKEOVERRIDES within a makefile. Extra variables can be exported from a makefile by appending their names to .Ql Va .MAKEOVERRIDES . .Ql Ev MAKEFLAGS is re-exported whenever .Ql Va .MAKEOVERRIDES is modified. .It Va .MAKE.PATH_FILEMON If .Nm was built with .Xr filemon 4 support, this is set to the path of the device node. This allows makefiles to test for this support. .It Va .MAKE.PID The process-id of .Nm . .It Va .MAKE.PPID The parent process-id of .Nm . .It Va .MAKE.SAVE_DOLLARS value should be a boolean that controls whether .Ql $$ are preserved when doing .Ql := assignments. The default is false, for backwards compatibility. Set to true for compatability with other makes. If set to false, .Ql $$ becomes .Ql $ per normal evaluation rules. .It Va .MAKE.UID The user-id running .Nm . .It Va .MAKE.GID The group-id running .Nm . .It Va MAKE_PRINT_VAR_ON_ERROR When .Nm stops due to an error, it sets .Ql Va .ERROR_TARGET to the name of the target that failed, .Ql Va .ERROR_CMD to the commands of the failed target, and in "meta" mode, it also sets .Ql Va .ERROR_CWD to the .Xr getcwd 3 , and .Ql Va .ERROR_META_FILE to the path of the meta file (if any) describing the failed target. It then prints its name and the value of .Ql Va .CURDIR as well as the value of any variables named in .Ql Va MAKE_PRINT_VAR_ON_ERROR . .It Va .newline This variable is simply assigned a newline character as its value. This allows expansions using the .Cm \&:@ modifier to put a newline between iterations of the loop rather than a space. For example, the printing of .Ql Va MAKE_PRINT_VAR_ON_ERROR could be done as ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@}. .It Va .OBJDIR A path to the directory where the targets are built. Its value is determined by trying to .Xr chdir 2 to the following directories in order and using the first match: .Bl -enum .It .Ev ${MAKEOBJDIRPREFIX}${.CURDIR} .Pp (Only if .Ql Ev MAKEOBJDIRPREFIX is set in the environment or on the command line.) .It .Ev ${MAKEOBJDIR} .Pp (Only if .Ql Ev MAKEOBJDIR is set in the environment or on the command line.) .It .Ev ${.CURDIR} Ns Pa /obj. Ns Ev ${MACHINE} .It .Ev ${.CURDIR} Ns Pa /obj .It .Pa /usr/obj/ Ns Ev ${.CURDIR} .It .Ev ${.CURDIR} .El .Pp Variable expansion is performed on the value before it's used, so expressions such as .Dl ${.CURDIR:S,^/usr/src,/var/obj,} may be used. This is especially useful with .Ql Ev MAKEOBJDIR . .Pp .Ql Va .OBJDIR may be modified in the makefile via the special target .Ql Ic .OBJDIR . In all cases, .Nm will .Xr chdir 2 to the specified directory if it exists, and set .Ql Va .OBJDIR and .Ql Ev PWD to that directory before executing any targets. .Pp Except in the case of an explicit .Ql Ic .OBJDIR target, .Nm will check that the specified directory is writable and ignore it if not. This check can be skipped by setting the environment variable .Ql Ev MAKE_OBJDIR_CHECK_WRITABLE to "no". . .It Va .PARSEDIR A path to the directory of the current .Ql Pa Makefile being parsed. .It Va .PARSEFILE The basename of the current .Ql Pa Makefile being parsed. This variable and .Ql Va .PARSEDIR are both set only while the .Ql Pa Makefiles are being parsed. If you want to retain their current values, assign them to a variable using assignment with expansion: .Pq Ql Cm \&:= . .It Va .PATH A variable that represents the list of directories that .Nm will search for files. The search list should be updated using the target .Ql Va .PATH rather than the variable. .It Ev PWD Alternate path to the current directory. .Nm normally sets .Ql Va .CURDIR to the canonical path given by .Xr getcwd 3 . However, if the environment variable .Ql Ev PWD is set and gives a path to the current directory, then .Nm sets .Ql Va .CURDIR to the value of .Ql Ev PWD instead. This behavior is disabled if .Ql Ev MAKEOBJDIRPREFIX is set or .Ql Ev MAKEOBJDIR contains a variable transform. .Ql Ev PWD is set to the value of .Ql Va .OBJDIR for all programs which .Nm executes. .It Ev .SHELL The pathname of the shell used to run target scripts. It is read-only. +.It Ev .SUFFIXES +The list of known suffixes. +It is read-only. .It Ev .TARGETS The list of targets explicitly specified on the command line, if any. .It Ev VPATH Colon-separated .Pq Dq \&: lists of directories that .Nm will search for files. The variable is supported for compatibility with old make programs only, use .Ql Va .PATH instead. .El .Ss Variable modifiers Variable expansion may be modified to select or modify each word of the variable (where a .Dq word is white-space delimited sequence of characters). The general format of a variable expansion is as follows: .Pp .Dl ${variable[:modifier[:...]]} .Pp Each modifier begins with a colon, which may be escaped with a backslash .Pq Ql \e . .Pp A set of modifiers can be specified via a variable, as follows: .Pp .Dl modifier_variable=modifier[:...] .Dl ${variable:${modifier_variable}[:...]} .Pp In this case the first modifier in the modifier_variable does not start with a colon, since that must appear in the referencing variable. If any of the modifiers in the modifier_variable contain a dollar sign .Pq Ql $ , these must be doubled to avoid early expansion. .Pp The supported modifiers are: .Bl -tag -width EEE .It Cm \&:E Replaces each word in the variable with its suffix. .It Cm \&:H Replaces each word in the variable with everything but the last component. .It Cm \&:M Ns Ar pattern Selects only those words that match .Ar pattern . The standard shell wildcard characters .Pf ( Ql * , .Ql \&? , and .Ql Oo Oc ) may be used. The wildcard characters may be escaped with a backslash .Pq Ql \e . As a consequence of the way values are split into words, matched, and then joined, a construct like .Dl ${VAR:M*} will normalize the inter-word spacing, removing all leading and trailing space, and converting multiple consecutive spaces to single spaces. . .It Cm \&:N Ns Ar pattern This is identical to .Ql Cm \&:M , but selects all words which do not match .Ar pattern . .It Cm \&:O Orders every word in variable alphabetically. +.It Cm \&:On +Orders every word in variable numerically. +A number followed by one of +.Ql k , +.Ql M +or +.Ql G +is multiplied by the appropriate factor (1024 (k), 1048576 (M), or +1073741824 (G)). +Both upper- and lower-case letters are accepted. .It Cm \&:Or Orders every word in variable in reverse alphabetical order. +.It Cm \&:Orn +Orders every word in variable in reverse numerical order. .It Cm \&:Ox Shuffles the words in variable. The results will be different each time you are referring to the modified variable; use the assignment with expansion .Pq Ql Cm \&:= to prevent such behavior. For example, .Bd -literal -offset indent LIST= uno due tre quattro RANDOM_LIST= ${LIST:Ox} STATIC_RANDOM_LIST:= ${LIST:Ox} all: @echo "${RANDOM_LIST}" @echo "${RANDOM_LIST}" @echo "${STATIC_RANDOM_LIST}" @echo "${STATIC_RANDOM_LIST}" .Ed may produce output similar to: .Bd -literal -offset indent quattro due tre uno tre due quattro uno due uno quattro tre due uno quattro tre .Ed .It Cm \&:Q Quotes every shell meta-character in the variable, so that it can be passed safely to the shell. .It Cm \&:q Quotes every shell meta-character in the variable, and also doubles .Sq $ characters so that it can be passed safely through recursive invocations of .Nm . This is equivalent to: .Sq \&:S/\e\&$/&&/g:Q . .It Cm \&:R Replaces each word in the variable with everything but its suffix. .It Cm \&:range[=count] The value is an integer sequence representing the words of the original value, or the supplied .Va count . .It Cm \&:gmtime[=utc] The value is a format string for .Xr strftime 3 , using .Xr gmtime 3 . If a .Va utc value is not provided or is 0, the current time is used. .It Cm \&:hash Computes a 32-bit hash of the value and encode it as hex digits. .It Cm \&:localtime[=utc] The value is a format string for .Xr strftime 3 , using .Xr localtime 3 . If a .Va utc value is not provided or is 0, the current time is used. .It Cm \&:tA Attempts to convert variable to an absolute path using .Xr realpath 3 , if that fails, the value is unchanged. .It Cm \&:tl Converts variable to lower-case letters. .It Cm \&:ts Ns Ar c Words in the variable are normally separated by a space on expansion. This modifier sets the separator to the character .Ar c . If .Ar c is omitted, then no separator is used. The common escapes (including octal numeric codes) work as expected. .It Cm \&:tu Converts variable to upper-case letters. .It Cm \&:tW Causes the value to be treated as a single word (possibly containing embedded white space). See also .Ql Cm \&:[*] . .It Cm \&:tw Causes the value to be treated as a sequence of words delimited by white space. See also .Ql Cm \&:[@] . .Sm off .It Cm \&:S No \&/ Ar old_string No \&/ Ar new_string No \&/ Op Cm 1gW .Sm on Modifies the first occurrence of .Ar old_string in each word of the variable's value, replacing it with .Ar new_string . If a .Ql g is appended to the last delimiter of the pattern, all occurrences in each word are replaced. If a .Ql 1 is appended to the last delimiter of the pattern, only the first occurrence is affected. If a .Ql W is appended to the last delimiter of the pattern, then the value is treated as a single word (possibly containing embedded white space). If .Ar old_string begins with a caret .Pq Ql ^ , .Ar old_string is anchored at the beginning of each word. If .Ar old_string ends with a dollar sign .Pq Ql \&$ , it is anchored at the end of each word. Inside .Ar new_string , an ampersand .Pq Ql & is replaced by .Ar old_string (without any .Ql ^ or .Ql \&$ ) . Any character may be used as a delimiter for the parts of the modifier string. The anchoring, ampersand and delimiter characters may be escaped with a backslash .Pq Ql \e . .Pp Variable expansion occurs in the normal fashion inside both .Ar old_string and .Ar new_string with the single exception that a backslash is used to prevent the expansion of a dollar sign .Pq Ql \&$ , not a preceding dollar sign as is usual. .Sm off .It Cm \&:C No \&/ Ar pattern No \&/ Ar replacement No \&/ Op Cm 1gW .Sm on The .Cm \&:C modifier is just like the .Cm \&:S modifier except that the old and new strings, instead of being simple strings, are an extended regular expression (see .Xr regex 3 ) string .Ar pattern and an .Xr ed 1 Ns \-style string .Ar replacement . Normally, the first occurrence of the pattern .Ar pattern in each word of the value is substituted with .Ar replacement . The .Ql 1 modifier causes the substitution to apply to at most one word; the .Ql g modifier causes the substitution to apply to as many instances of the search pattern .Ar pattern as occur in the word or words it is found in; the .Ql W modifier causes the value to be treated as a single word (possibly containing embedded white space). .Pp As for the .Cm \&:S modifier, the .Ar pattern and .Ar replacement are subjected to variable expansion before being parsed as regular expressions. .It Cm \&:T Replaces each word in the variable with its last path component. .It Cm \&:u Removes adjacent duplicate words (like .Xr uniq 1 ) . .Sm off .It Cm \&:\&? Ar true_string Cm \&: Ar false_string .Sm on If the variable name (not its value), when parsed as a .if conditional expression, evaluates to true, return as its value the .Ar true_string , otherwise return the .Ar false_string . Since the variable name is used as the expression, \&:\&? must be the first modifier after the variable name itself - which will, of course, usually contain variable expansions. A common error is trying to use expressions like .Dl ${NUMBERS:M42:?match:no} which actually tests defined(NUMBERS), to determine if any words match "42" you need to use something like: .Dl ${"${NUMBERS:M42}" != \&"\&":?match:no} . .It Ar :old_string=new_string This is the .At V style variable substitution. It must be the last modifier specified. If .Ar old_string or .Ar new_string do not contain the pattern matching character .Ar % then it is assumed that they are anchored at the end of each word, so only suffixes or entire words may be replaced. Otherwise .Ar % is the substring of .Ar old_string to be replaced in .Ar new_string . If only .Ar old_string contains the pattern matching character .Ar % , and .Ar old_string matches, then the result is the .Ar new_string . If only the .Ar new_string contains the pattern matching character .Ar % , then it is not treated specially and it is printed as a literal .Ar % on match. If there is more than one pattern matching character .Ar ( % ) in either the .Ar new_string or .Ar old_string , only the first instance is treated specially (as the pattern character); all subsequent instances are treated as regular characters. .Pp Variable expansion occurs in the normal fashion inside both .Ar old_string and .Ar new_string with the single exception that a backslash is used to prevent the expansion of a dollar sign .Pq Ql \&$ , not a preceding dollar sign as is usual. .Sm off .It Cm \&:@ Ar temp Cm @ Ar string Cm @ .Sm on This is the loop expansion mechanism from the OSF Development Environment (ODE) make. Unlike .Cm \&.for loops, expansion occurs at the time of reference. Assigns .Ar temp to each word in the variable and evaluates .Ar string . The ODE convention is that .Ar temp should start and end with a period. For example. .Dl ${LINKS:@.LINK.@${LN} ${TARGET} ${.LINK.}@} .Pp However a single character variable is often more readable: .Dl ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@} .It Cm \&:_[=var] Saves the current variable value in .Ql $_ or the named .Va var for later reference. Example usage: .Bd -literal -offset indent M_cmpv.units = 1 1000 1000000 M_cmpv = S,., ,g:_:range:@i@+ $${_:[-$$i]} \&\\ \\* $${M_cmpv.units:[$$i]}@:S,^,expr 0 ,1:sh .Dv .if ${VERSION:${M_cmpv}} < ${3.1.12:L:${M_cmpv}} .Ed Here .Ql $_ is used to save the result of the .Ql :S modifier which is later referenced using the index values from .Ql :range . .It Cm \&:U Ns Ar newval If the variable is undefined, .Ar newval is the value. If the variable is defined, the existing value is returned. This is another ODE make feature. It is handy for setting per-target CFLAGS for instance: .Dl ${_${.TARGET:T}_CFLAGS:U${DEF_CFLAGS}} If a value is only required if the variable is undefined, use: .Dl ${VAR:D:Unewval} .It Cm \&:D Ns Ar newval If the variable is defined, .Ar newval is the value. .It Cm \&:L The name of the variable is the value. .It Cm \&:P The path of the node which has the same name as the variable is the value. If no such node exists or its path is null, then the name of the variable is used. In order for this modifier to work, the name (node) must at least have appeared on the rhs of a dependency. .Sm off .It Cm \&:\&! Ar cmd Cm \&! .Sm on The output of running .Ar cmd is the value. .It Cm \&:sh If the variable is non-empty it is run as a command and the output becomes the new value. .It Cm \&::= Ns Ar str The variable is assigned the value .Ar str after substitution. This modifier and its variations are useful in obscure situations such as wanting to set a variable when shell commands are being parsed. These assignment modifiers always expand to nothing, so if appearing in a rule line by themselves should be preceded with something to keep .Nm happy. .Pp The .Ql Cm \&:: helps avoid false matches with the .At V style .Cm \&:= modifier and since substitution always occurs the .Cm \&::= form is vaguely appropriate. .It Cm \&::?= Ns Ar str As for .Cm \&::= but only if the variable does not already have a value. .It Cm \&::+= Ns Ar str Append .Ar str to the variable. .It Cm \&::!= Ns Ar cmd Assign the output of .Ar cmd to the variable. .It Cm \&:\&[ Ns Ar range Ns Cm \&] Selects one or more words from the value, or performs other operations related to the way in which the value is divided into words. .Pp Ordinarily, a value is treated as a sequence of words delimited by white space. Some modifiers suppress this behavior, causing a value to be treated as a single word (possibly containing embedded white space). An empty value, or a value that consists entirely of white-space, is treated as a single word. For the purposes of the .Ql Cm \&:[] modifier, the words are indexed both forwards using positive integers (where index 1 represents the first word), and backwards using negative integers (where index \-1 represents the last word). .Pp The .Ar range is subjected to variable expansion, and the expanded result is then interpreted as follows: .Bl -tag -width index .\" :[n] .It Ar index Selects a single word from the value. .\" :[start..end] .It Ar start Ns Cm \&.. Ns Ar end Selects all words from .Ar start to .Ar end , inclusive. For example, .Ql Cm \&:[2..-1] selects all words from the second word to the last word. If .Ar start is greater than .Ar end , then the words are output in reverse order. For example, .Ql Cm \&:[-1..1] selects all the words from last to first. If the list is already ordered, then this effectively reverses the list, but it is more efficient to use .Ql Cm \&:Or instead of .Ql Cm \&:O:[-1..1] . .\" :[*] .It Cm \&* Causes subsequent modifiers to treat the value as a single word (possibly containing embedded white space). Analogous to the effect of \&"$*\&" in Bourne shell. .\" :[0] .It 0 Means the same as .Ql Cm \&:[*] . .\" :[*] .It Cm \&@ Causes subsequent modifiers to treat the value as a sequence of words delimited by white space. Analogous to the effect of \&"$@\&" in Bourne shell. .\" :[#] .It Cm \&# Returns the number of words in the value. .El \" :[range] .El .Sh INCLUDE STATEMENTS, CONDITIONALS AND FOR LOOPS Makefile inclusion, conditional structures and for loops reminiscent of the C programming language are provided in .Nm . All such structures are identified by a line beginning with a single dot .Pq Ql \&. character. Files are included with either .Cm \&.include \&< Ns Ar file Ns Cm \&> or .Cm \&.include \&\*q Ns Ar file Ns Cm \&\*q . Variables between the angle brackets or double quotes are expanded to form the file name. If angle brackets are used, the included makefile is expected to be in the system makefile directory. If double quotes are used, the including makefile's directory and any directories specified using the .Fl I option are searched before the system makefile directory. For compatibility with other versions of .Nm .Ql include file ... is also accepted. .Pp If the include statement is written as .Cm .-include or as .Cm .sinclude then errors locating and/or opening include files are ignored. .Pp If the include statement is written as .Cm .dinclude not only are errors locating and/or opening include files ignored, but stale dependencies within the included file will be ignored just like .Va .MAKE.DEPENDFILE . .Pp Conditional expressions are also preceded by a single dot as the first character of a line. The possible conditionals are as follows: .Bl -tag -width Ds .It Ic .error Ar message The message is printed along with the name of the makefile and line number, then .Nm will exit immediately. .It Ic .export Ar variable ... Export the specified global variable. If no variable list is provided, all globals are exported except for internal variables (those that start with .Ql \&. ) . This is not affected by the .Fl X flag, so should be used with caution. For compatibility with other .Nm programs .Ql export variable=value is also accepted. .Pp Appending a variable name to .Va .MAKE.EXPORTED is equivalent to exporting a variable. .It Ic .export-env Ar variable ... The same as .Ql .export , except that the variable is not appended to .Va .MAKE.EXPORTED . This allows exporting a value to the environment which is different from that used by .Nm internally. .It Ic .export-literal Ar variable ... The same as .Ql .export-env , except that variables in the value are not expanded. .It Ic .info Ar message The message is printed along with the name of the makefile and line number. .It Ic .undef Ar variable ... Un-define the specified global variables. Only global variables can be un-defined. .It Ic .unexport Ar variable ... The opposite of .Ql .export . The specified global .Va variable will be removed from .Va .MAKE.EXPORTED . If no variable list is provided, all globals are unexported, and .Va .MAKE.EXPORTED deleted. .It Ic .unexport-env Unexport all globals previously exported and clear the environment inherited from the parent. This operation will cause a memory leak of the original environment, so should be used sparingly. Testing for .Va .MAKE.LEVEL being 0, would make sense. Also note that any variables which originated in the parent environment should be explicitly preserved if desired. For example: .Bd -literal -offset indent .Li .if ${.MAKE.LEVEL} == 0 PATH := ${PATH} .Li .unexport-env .Li .export PATH .Li .endif .Pp .Ed Would result in an environment containing only .Ql Ev PATH , which is the minimal useful environment. Actually .Ql Ev .MAKE.LEVEL will also be pushed into the new environment. .It Ic .warning Ar message The message prefixed by .Ql Pa warning: is printed along with the name of the makefile and line number. .It Ic \&.if Oo \&! Oc Ns Ar expression Op Ar operator expression ... Test the value of an expression. .It Ic .ifdef Oo \&! Oc Ns Ar variable Op Ar operator variable ... Test the value of a variable. .It Ic .ifndef Oo \&! Oc Ns Ar variable Op Ar operator variable ... Test the value of a variable. .It Ic .ifmake Oo \&! Oc Ns Ar target Op Ar operator target ... Test the target being built. .It Ic .ifnmake Oo \&! Ns Oc Ar target Op Ar operator target ... Test the target being built. .It Ic .else Reverse the sense of the last conditional. .It Ic .elif Oo \&! Ns Oc Ar expression Op Ar operator expression ... A combination of .Ql Ic .else followed by .Ql Ic .if . .It Ic .elifdef Oo \&! Oc Ns Ar variable Op Ar operator variable ... A combination of .Ql Ic .else followed by .Ql Ic .ifdef . .It Ic .elifndef Oo \&! Oc Ns Ar variable Op Ar operator variable ... A combination of .Ql Ic .else followed by .Ql Ic .ifndef . .It Ic .elifmake Oo \&! Oc Ns Ar target Op Ar operator target ... A combination of .Ql Ic .else followed by .Ql Ic .ifmake . .It Ic .elifnmake Oo \&! Oc Ns Ar target Op Ar operator target ... A combination of .Ql Ic .else followed by .Ql Ic .ifnmake . .It Ic .endif End the body of the conditional. .El .Pp The .Ar operator may be any one of the following: .Bl -tag -width "Cm XX" .It Cm \&|\&| Logical OR. .It Cm \&&& Logical .Tn AND ; of higher precedence than .Dq \&|\&| . .El .Pp As in C, .Nm will only evaluate a conditional as far as is necessary to determine its value. Parentheses may be used to change the order of evaluation. The boolean operator .Ql Ic \&! may be used to logically negate an entire conditional. It is of higher precedence than .Ql Ic \&&& . .Pp The value of .Ar expression may be any of the following: .Bl -tag -width defined .It Ic defined Takes a variable name as an argument and evaluates to true if the variable has been defined. .It Ic make Takes a target name as an argument and evaluates to true if the target was specified as part of .Nm Ns 's command line or was declared the default target (either implicitly or explicitly, see .Va .MAIN ) before the line containing the conditional. .It Ic empty Takes a variable, with possible modifiers, and evaluates to true if the expansion of the variable would result in an empty string. .It Ic exists Takes a file name as an argument and evaluates to true if the file exists. The file is searched for on the system search path (see .Va .PATH ) . .It Ic target Takes a target name as an argument and evaluates to true if the target has been defined. .It Ic commands Takes a target name as an argument and evaluates to true if the target has been defined and has commands associated with it. .El .Pp .Ar Expression may also be an arithmetic or string comparison. Variable expansion is performed on both sides of the comparison, after which the numerical values are compared. A value is interpreted as hexadecimal if it is preceded by 0x, otherwise it is decimal; octal numbers are not supported. The standard C relational operators are all supported. If after variable expansion, either the left or right hand side of a .Ql Ic == or .Ql Ic "!=" operator is not a numerical value, then string comparison is performed between the expanded variables. If no relational operator is given, it is assumed that the expanded variable is being compared against 0, or an empty string in the case of a string comparison. .Pp When .Nm is evaluating one of these conditional expressions, and it encounters a (white-space separated) word it doesn't recognize, either the .Dq make or .Dq defined expression is applied to it, depending on the form of the conditional. If the form is .Ql Ic .ifdef , .Ql Ic .ifndef , or .Ql Ic .if the .Dq defined expression is applied. Similarly, if the form is .Ql Ic .ifmake or .Ql Ic .ifnmake , the .Dq make expression is applied. .Pp If the conditional evaluates to true the parsing of the makefile continues as before. If it evaluates to false, the following lines are skipped. In both cases this continues until a .Ql Ic .else or .Ql Ic .endif is found. .Pp For loops are typically used to apply a set of rules to a list of files. The syntax of a for loop is: .Pp .Bl -tag -compact -width Ds .It Ic \&.for Ar variable Oo Ar variable ... Oc Ic in Ar expression .It Aq make-lines .It Ic \&.endfor .El .Pp After the for .Ic expression is evaluated, it is split into words. On each iteration of the loop, one word is taken and assigned to each .Ic variable , in order, and these .Ic variables are substituted into the .Ic make-lines inside the body of the for loop. The number of words must come out even; that is, if there are three iteration variables, the number of words provided must be a multiple of three. .Sh COMMENTS Comments begin with a hash .Pq Ql \&# character, anywhere but in a shell command line, and continue to the end of an unescaped new line. .Sh SPECIAL SOURCES (ATTRIBUTES) .Bl -tag -width .IGNOREx .It Ic .EXEC Target is never out of date, but always execute commands anyway. .It Ic .IGNORE Ignore any errors from the commands associated with this target, exactly as if they all were preceded by a dash .Pq Ql \- . .\" .It Ic .INVISIBLE .\" XXX .\" .It Ic .JOIN .\" XXX .It Ic .MADE Mark all sources of this target as being up-to-date. .It Ic .MAKE Execute the commands associated with this target even if the .Fl n or .Fl t options were specified. Normally used to mark recursive .Nm Ns s . .It Ic .META Create a meta file for the target, even if it is flagged as .Ic .PHONY , .Ic .MAKE , or .Ic .SPECIAL . Usage in conjunction with .Ic .MAKE is the most likely case. In "meta" mode, the target is out-of-date if the meta file is missing. .It Ic .NOMETA Do not create a meta file for the target. Meta files are also not created for .Ic .PHONY , .Ic .MAKE , or .Ic .SPECIAL targets. .It Ic .NOMETA_CMP Ignore differences in commands when deciding if target is out of date. This is useful if the command contains a value which always changes. If the number of commands change, though, the target will still be out of date. The same effect applies to any command line that uses the variable .Va .OODATE , which can be used for that purpose even when not otherwise needed or desired: .Bd -literal -offset indent skip-compare-for-some: @echo this will be compared @echo this will not ${.OODATE:M.NOMETA_CMP} @echo this will also be compared .Ed The .Cm \&:M pattern suppresses any expansion of the unwanted variable. .It Ic .NOPATH Do not search for the target in the directories specified by .Ic .PATH . .It Ic .NOTMAIN Normally .Nm selects the first target it encounters as the default target to be built if no target was specified. This source prevents this target from being selected. .It Ic .OPTIONAL If a target is marked with this attribute and .Nm can't figure out how to create it, it will ignore this fact and assume the file isn't needed or already exists. .It Ic .PHONY The target does not correspond to an actual file; it is always considered to be out of date, and will not be created with the .Fl t option. Suffix-transformation rules are not applied to .Ic .PHONY targets. .It Ic .PRECIOUS When .Nm is interrupted, it normally removes any partially made targets. This source prevents the target from being removed. .It Ic .RECURSIVE Synonym for .Ic .MAKE . .It Ic .SILENT Do not echo any of the commands associated with this target, exactly as if they all were preceded by an at sign .Pq Ql @ . .It Ic .USE Turn the target into .Nm Ns 's version of a macro. When the target is used as a source for another target, the other target acquires the commands, sources, and attributes (except for .Ic .USE ) of the source. If the target already has commands, the .Ic .USE target's commands are appended to them. .It Ic .USEBEFORE Exactly like .Ic .USE , but prepend the .Ic .USEBEFORE target commands to the target. .It Ic .WAIT If .Ic .WAIT appears in a dependency line, the sources that precede it are made before the sources that succeed it in the line. Since the dependents of files are not made until the file itself could be made, this also stops the dependents being built unless they are needed for another branch of the dependency tree. So given: .Bd -literal x: a .WAIT b echo x a: echo a b: b1 echo b b1: echo b1 .Ed the output is always .Ql a , .Ql b1 , .Ql b , .Ql x . .br The ordering imposed by .Ic .WAIT is only relevant for parallel makes. .El .Sh SPECIAL TARGETS Special targets may not be included with other targets, i.e. they must be the only target specified. .Bl -tag -width .BEGINx .It Ic .BEGIN Any command lines attached to this target are executed before anything else is done. .It Ic .DEFAULT This is sort of a .Ic .USE rule for any target (that was used only as a source) that .Nm can't figure out any other way to create. Only the shell script is used. The .Ic .IMPSRC variable of a target that inherits .Ic .DEFAULT Ns 's commands is set to the target's own name. .It Ic .DELETE_ON_ERROR If this target is present in the makefile, it globally causes make to delete targets whose commands fail. (By default, only targets whose commands are interrupted during execution are deleted. This is the historical behavior.) This setting can be used to help prevent half-finished or malformed targets from being left around and corrupting future rebuilds. .It Ic .END Any command lines attached to this target are executed after everything else is done. .It Ic .ERROR Any command lines attached to this target are executed when another target fails. The .Ic .ERROR_TARGET variable is set to the target that failed. See also .Ic MAKE_PRINT_VAR_ON_ERROR . .It Ic .IGNORE Mark each of the sources with the .Ic .IGNORE attribute. If no sources are specified, this is the equivalent of specifying the .Fl i option. .It Ic .INTERRUPT If .Nm is interrupted, the commands for this target will be executed. .It Ic .MAIN If no target is specified when .Nm is invoked, this target will be built. .It Ic .MAKEFLAGS This target provides a way to specify flags for .Nm when the makefile is used. The flags are as if typed to the shell, though the .Fl f option will have no effect. .\" XXX: NOT YET!!!! .\" .It Ic .NOTPARALLEL .\" The named targets are executed in non parallel mode. .\" If no targets are .\" specified, then all targets are executed in non parallel mode. .It Ic .NOPATH Apply the .Ic .NOPATH attribute to any specified sources. .It Ic .NOTPARALLEL Disable parallel mode. .It Ic .NO_PARALLEL Synonym for .Ic .NOTPARALLEL , for compatibility with other pmake variants. .It Ic .OBJDIR The source is a new value for .Ql Va .OBJDIR . If it exists, .Nm will .Xr chdir 2 to it and update the value of .Ql Va .OBJDIR . .It Ic .ORDER The named targets are made in sequence. This ordering does not add targets to the list of targets to be made. Since the dependents of a target do not get built until the target itself could be built, unless .Ql a is built by another part of the dependency graph, the following is a dependency loop: .Bd -literal \&.ORDER: b a b: a .Ed .Pp The ordering imposed by .Ic .ORDER is only relevant for parallel makes. .\" XXX: NOT YET!!!! .\" .It Ic .PARALLEL .\" The named targets are executed in parallel mode. .\" If no targets are .\" specified, then all targets are executed in parallel mode. .It Ic .PATH The sources are directories which are to be searched for files not found in the current directory. If no sources are specified, any previously specified directories are deleted. If the source is the special .Ic .DOTLAST target, then the current working directory is searched last. .It Ic .PATH. Ns Va suffix Like .Ic .PATH but applies only to files with a particular suffix. The suffix must have been previously declared with .Ic .SUFFIXES . .It Ic .PHONY Apply the .Ic .PHONY attribute to any specified sources. .It Ic .PRECIOUS Apply the .Ic .PRECIOUS attribute to any specified sources. If no sources are specified, the .Ic .PRECIOUS attribute is applied to every target in the file. .It Ic .SHELL Sets the shell that .Nm will use to execute commands. The sources are a set of .Ar field=value pairs. .Bl -tag -width hasErrCtls .It Ar name This is the minimal specification, used to select one of the built-in shell specs; .Ar sh , .Ar ksh , and .Ar csh . .It Ar path Specifies the path to the shell. .It Ar hasErrCtl Indicates whether the shell supports exit on error. .It Ar check The command to turn on error checking. .It Ar ignore The command to disable error checking. .It Ar echo The command to turn on echoing of commands executed. .It Ar quiet The command to turn off echoing of commands executed. .It Ar filter The output to filter after issuing the .Ar quiet command. It is typically identical to .Ar quiet . .It Ar errFlag The flag to pass the shell to enable error checking. .It Ar echoFlag The flag to pass the shell to enable command echoing. .It Ar newline The string literal to pass the shell that results in a single newline character when used outside of any quoting characters. .El Example: .Bd -literal \&.SHELL: name=ksh path=/bin/ksh hasErrCtl=true \e check="set \-e" ignore="set +e" \e echo="set \-v" quiet="set +v" filter="set +v" \e echoFlag=v errFlag=e newline="'\en'" .Ed .It Ic .SILENT Apply the .Ic .SILENT attribute to any specified sources. If no sources are specified, the .Ic .SILENT attribute is applied to every command in the file. .It Ic .STALE This target gets run when a dependency file contains stale entries, having .Va .ALLSRC set to the name of that dependency file. .It Ic .SUFFIXES Each source specifies a suffix to .Nm . If no sources are specified, any previously specified suffixes are deleted. It allows the creation of suffix-transformation rules. .Pp Example: .Bd -literal \&.SUFFIXES: .o \&.c.o: cc \-o ${.TARGET} \-c ${.IMPSRC} .Ed .El .Sh ENVIRONMENT .Nm uses the following environment variables, if they exist: .Ev MACHINE , .Ev MACHINE_ARCH , .Ev MAKE , .Ev MAKEFLAGS , .Ev MAKEOBJDIR , .Ev MAKEOBJDIRPREFIX , .Ev MAKESYSPATH , .Ev PWD , and .Ev TMPDIR . .Pp .Ev MAKEOBJDIRPREFIX and .Ev MAKEOBJDIR may only be set in the environment or on the command line to .Nm and not as makefile variables; see the description of .Ql Va .OBJDIR for more details. .Sh FILES .Bl -tag -width /usr/share/mk -compact .It .depend list of dependencies .It Makefile list of dependencies .It makefile list of dependencies .It sys.mk system makefile .It /usr/share/mk system makefile directory .El .Sh COMPATIBILITY The basic make syntax is compatible between different versions of make; however the special variables, variable modifiers and conditionals are not. .Ss Older versions An incomplete list of changes in older versions of .Nm : .Pp The way that .for loop variables are substituted changed after NetBSD 5.0 so that they still appear to be variable expansions. In particular this stops them being treated as syntax, and removes some obscure problems using them in .if statements. .Pp The way that parallel makes are scheduled changed in NetBSD 4.0 so that .ORDER and .WAIT apply recursively to the dependent nodes. The algorithms used may change again in the future. .Ss Other make dialects Other make dialects (GNU make, SVR4 make, POSIX make, etc.) do not support most of the features of .Nm as described in this manual. Most notably: .Bl -bullet -offset indent .It The .Ic .WAIT and .Ic .ORDER declarations and most functionality pertaining to parallelization. (GNU make supports parallelization but lacks these features needed to control it effectively.) .It Directives, including for loops and conditionals and most of the forms of include files. (GNU make has its own incompatible and less powerful syntax for conditionals.) .It All built-in variables that begin with a dot. .It Most of the special sources and targets that begin with a dot, with the notable exception of .Ic .PHONY , .Ic .PRECIOUS , and .Ic .SUFFIXES . .It Variable modifiers, except for the .Dl :old=new string substitution, which does not portably support globbing with .Ql % and historically only works on declared suffixes. .It The .Ic $> variable even in its short form; most makes support this functionality but its name varies. .El .Pp Some features are somewhat more portable, such as assignment with .Ic += , .Ic ?= , and .Ic != . The .Ic .PATH functionality is based on an older feature .Ic VPATH found in GNU make and many versions of SVR4 make; however, historically its behavior is too ill-defined (and too buggy) to rely upon. .Pp The .Ic $@ and .Ic $< variables are more or less universally portable, as is the .Ic $(MAKE) variable. Basic use of suffix rules (for files only in the current directory, not trying to chain transformations together, etc.) is also reasonably portable. .Sh SEE ALSO .Xr mkdep 1 .Sh HISTORY .Nm is derived from NetBSD .Xr make 1 . It uses autoconf to facilitate portability to other platforms. .Pp A make command appeared in .At v7 . This make implementation is based on Adam De Boor's pmake program which was written for Sprite at Berkeley. It was designed to be a parallel distributed make running jobs on different machines using a daemon called .Dq customs . .Pp Historically the target/dependency .Dq FRC has been used to FoRCe rebuilding (since the target/dependency does not exist... unless someone creates an .Dq FRC file). .Sh BUGS The make syntax is difficult to parse without actually acting on the data. For instance, finding the end of a variable's use should involve scanning each of the modifiers, using the correct terminator for each field. In many places make just counts {} and () in order to find the end of a variable expansion. .Pp There is no way of escaping a space character in a filename. diff --git a/contrib/bmake/bmake.cat1 b/contrib/bmake/bmake.cat1 index d9723b35cf7f..73191dea7344 100644 --- a/contrib/bmake/bmake.cat1 +++ b/contrib/bmake/bmake.cat1 @@ -1,1584 +1,1594 @@ BMAKE(1) FreeBSD General Commands Manual BMAKE(1) NAME bmake -- maintain program dependencies SYNOPSIS bmake [-BeikNnqrSstWwX] [-C directory] [-D variable] [-d flags] [-f makefile] [-I directory] [-J private] [-j max_jobs] [-m directory] [-T file] [-V variable] [-v variable] [variable=value] [target ...] DESCRIPTION bmake is a program designed to simplify the maintenance of other pro- grams. Its input is a list of specifications as to the files upon which programs and other files depend. If no -f makefile makefile option is given, bmake will try to open `makefile' then `Makefile' in order to find the specifications. If the file `.depend' exists, it is read (see mkdep(1)). This manual page is intended as a reference document only. For a more thorough description of bmake and makefiles, please refer to PMake - A Tutorial. bmake will prepend the contents of the MAKEFLAGS environment variable to the command line arguments before parsing them. The options are as follows: -B Try to be backwards compatible by executing a single shell per command and by executing the commands to make the sources of a dependency line in sequence. -C directory Change to directory before reading the makefiles or doing any- thing else. If multiple -C options are specified, each is inter- preted relative to the previous one: -C / -C etc is equivalent to -C /etc. -D variable Define variable to be 1, in the global scope. -d [-]flags Turn on debugging, and specify which portions of bmake are to print debugging information. Unless the flags are preceded by `-' they are added to the MAKEFLAGS environment variable and will be processed by any child make processes. By default, debugging information is printed to standard error, but this can be changed using the F debugging flag. The debugging output is always un- buffered; in addition, if debugging is enabled but debugging out- put is not directed to standard output, then the standard output is line buffered. Flags is one or more of the following: A Print all possible debugging information; equivalent to specifying all of the debugging flags. a Print debugging information about archive searching and caching. C Print debugging information about current working direc- tory. c Print debugging information about conditional evaluation. d Print debugging information about directory searching and caching. e Print debugging information about failed commands and targets. F[+]filename Specify where debugging output is written. This must be the last flag, because it consumes the remainder of the argument. If the character immediately after the `F' flag is `+', then the file will be opened in append mode; otherwise the file will be overwritten. If the file name is `stdout' or `stderr' then debugging output will be written to the standard output or standard error output file descriptors respectively (and the `+' option has no effect). Otherwise, the output will be written to the named file. If the file name ends `.%d' then the `%d' is replaced by the pid. f Print debugging information about loop evaluation. g1 Print the input graph before making anything. g2 Print the input graph after making everything, or before exiting on error. g3 Print the input graph before exiting on error. h Print debugging information about hash table operations. j Print debugging information about running multiple shells. L Turn on lint checks. This will throw errors for variable assignments that do not parse correctly, at the time of assignment so the file and line number are available. l Print commands in Makefiles regardless of whether or not they are prefixed by `@' or other "quiet" flags. Also known as "loud" behavior. M Print debugging information about "meta" mode decisions about targets. m Print debugging information about making targets, includ- ing modification dates. n Don't delete the temporary command scripts created when running commands. These temporary scripts are created in the directory referred to by the TMPDIR environment vari- able, or in /tmp if TMPDIR is unset or set to the empty string. The temporary scripts are created by mkstemp(3), and have names of the form makeXXXXXX. NOTE: This can create many files in TMPDIR or /tmp, so use with care. p Print debugging information about makefile parsing. s Print debugging information about suffix-transformation rules. t Print debugging information about target list mainte- nance. V Force the -V option to print raw values of variables, overriding the default behavior set via .MAKE.EXPAND_VARIABLES. v Print debugging information about variable assignment. x Run shell commands with -x so the actual commands are printed as they are executed. -e Specify that environment variables override macro assignments within makefiles. -f makefile Specify a makefile to read instead of the default `makefile'. If makefile is `-', standard input is read. Multiple makefiles may be specified, and are read in the order specified. -I directory Specify a directory in which to search for makefiles and included makefiles. The system makefile directory (or directories, see the -m option) is automatically included as part of this list. -i Ignore non-zero exit of shell commands in the makefile. Equiva- lent to specifying `-' before each command line in the makefile. -J private This option should not be specified by the user. When the j option is in use in a recursive build, this option is passed by a make to child makes to allow all the make processes in the build to cooperate to avoid overloading the system. -j max_jobs Specify the maximum number of jobs that bmake may have running at any one time. The value is saved in .MAKE.JOBS. Turns compati- bility mode off, unless the B flag is also specified. When com- patibility mode is off, all commands associated with a target are executed in a single shell invocation as opposed to the tradi- tional one shell invocation per line. This can break traditional scripts which change directories on each command invocation and then expect to start with a fresh environment on the next line. It is more efficient to correct the scripts rather than turn backwards compatibility on. -k Continue processing after errors are encountered, but only on those targets that do not depend on the target whose creation caused the error. -m directory Specify a directory in which to search for sys.mk and makefiles included via the <file>-style include statement. The -m option can be used multiple times to form a search path. This path will override the default system include path: /usr/share/mk. Fur- thermore the system include path will be appended to the search path used for "file"-style include statements (see the -I op- tion). If a file or directory name in the -m argument (or the MAKESYSPATH environment variable) starts with the string ".../" then bmake will search for the specified file or directory named in the remaining part of the argument string. The search starts with the current directory of the Makefile and then works upward towards the root of the file system. If the search is success- ful, then the resulting directory replaces the ".../" specifica- tion in the -m argument. If used, this feature allows bmake to easily search in the current source tree for customized sys.mk files (e.g., by using ".../mk/sys.mk" as an argument). -n Display the commands that would have been executed, but do not actually execute them unless the target depends on the .MAKE spe- cial source (see below) or the command is prefixed with `+'. -N Display the commands which would have been executed, but do not actually execute any of them; useful for debugging top-level makefiles without descending into subdirectories. -q Do not execute any commands, but exit 0 if the specified targets are up-to-date and 1, otherwise. -r Do not use the built-in rules specified in the system makefile. -S Stop processing if an error is encountered. This is the default behavior and the opposite of -k. -s Do not echo any commands as they are executed. Equivalent to specifying `@' before each command line in the makefile. -T tracefile When used with the -j flag, append a trace record to tracefile for each job started and completed. -t Rather than re-building a target as specified in the makefile, create it or update its modification time to make it appear up- to-date. -V variable Print the value of variable. Do not build any targets. Multiple instances of this option may be specified; the variables will be printed one per line, with a blank line for each null or unde- fined variable. The value printed is extracted from the global scope after all makefiles have been read. By default, the raw variable contents (which may include additional unexpanded vari- able references) are shown. If variable contains a `$' then the value will be recursively expanded to its complete resultant text before printing. The expanded value will also be printed if .MAKE.EXPAND_VARIABLES is set to true and the -dV option has not been used to override it. Note that loop-local and target-local variables, as well as values taken temporarily by global vari- ables during makefile processing, are not accessible via this op- tion. The -dv debug mode can be used to see these at the cost of generating substantial extraneous output. -v variable Like -V but the variable is always expanded to its complete value. -W Treat any warnings during makefile parsing as errors. -w Print entering and leaving directory messages, pre and post pro- cessing. -X Don't export variables passed on the command line to the environ- ment individually. Variables passed on the command line are still exported via the MAKEFLAGS environment variable. This op- tion may be useful on systems which have a small limit on the size of command arguments. variable=value Set the value of the variable variable to value. Normally, all values passed on the command line are also exported to sub-makes in the environment. The -X flag disables this behavior. Vari- able assignments should follow options for POSIX compatibility but no ordering is enforced. There are seven different types of lines in a makefile: file dependency specifications, shell commands, variable assignments, include statements, conditional directives, for loops, and comments. In general, lines may be continued from one line to the next by ending them with a backslash (`\'). The trailing newline character and initial whitespace on the following line are compressed into a single space. FILE DEPENDENCY SPECIFICATIONS Dependency lines consist of one or more targets, an operator, and zero or more sources. This creates a relationship where the targets "depend" on the sources and are customarily created from them. A target is consid- ered out-of-date if it does not exist, or if its modification time is less than that of any of its sources. An out-of-date target will be re- created, but not until all sources have been examined and themselves re- created as needed. Three operators may be used: : Many dependency lines may name this target but only one may have attached shell commands. All sources named in all dependency lines are considered together, and if needed the attached shell commands are run to create or re-create the target. If bmake is inter- rupted, the target is removed. ! The same, but the target is always re-created whether or not it is out of date. :: Any dependency line may have attached shell commands, but each one is handled independently: its sources are considered and the at- tached shell commands are run if the target is out of date with re- spect to (only) those sources. Thus, different groups of the at- tached shell commands may be run depending on the circumstances. Furthermore, unlike :, for dependency lines with no sources, the attached shell commands are always run. Also unlike :, the target will not be removed if bmake is interrupted. All dependency lines mentioning a particular target must use the same op- erator. Targets and sources may contain the shell wildcard values `?', `*', `[]', and `{}'. The values `?', `*', and `[]' may only be used as part of the final component of the target or source, and must be used to describe ex- isting files. The value `{}' need not necessarily be used to describe existing files. Expansion is in directory order, not alphabetically as done in the shell. SHELL COMMANDS Each target may have associated with it one or more lines of shell com- mands, normally used to create the target. Each of the lines in this script must be preceded by a tab. (For historical reasons, spaces are not accepted.) While targets can appear in many dependency lines if de- sired, by default only one of these rules may be followed by a creation script. If the `::' operator is used, however, all rules may include scripts and the scripts are executed in the order found. Each line is treated as a separate shell command, unless the end of line is escaped with a backslash (`\') in which case that line and the next are combined. If the first characters of the command are any combination of `@', `+', or `-', the command is treated specially. A `@' causes the command not to be echoed before it is executed. A `+' causes the command to be executed even when -n is given. This is similar to the effect of the .MAKE special source, except that the effect can be limited to a sin- gle line of a script. A `-' in compatibility mode causes any non-zero exit status of the command line to be ignored. When bmake is run in jobs mode with -j max_jobs, the entire script for the target is fed to a single instance of the shell. In compatibility (non-jobs) mode, each command is run in a separate process. If the com- mand contains any shell meta characters (`#=|^(){};&<>*?[]:$`\\n') it will be passed to the shell; otherwise bmake will attempt direct execu- tion. If a line starts with `-' and the shell has ErrCtl enabled then failure of the command line will be ignored as in compatibility mode. Otherwise `-' affects the entire job; the script will stop at the first command line that fails, but the target will not be deemed to have failed. Makefiles should be written so that the mode of bmake operation does not change their behavior. For example, any command which needs to use "cd" or "chdir" without potentially changing the directory for subsequent com- mands should be put in parentheses so it executes in a subshell. To force the use of one shell, escape the line breaks so as to make the whole script one command. For example: avoid-chdir-side-effects: @echo Building $@ in `pwd` @(cd ${.CURDIR} && ${MAKE} $@) @echo Back in `pwd` ensure-one-shell-regardless-of-mode: @echo Building $@ in `pwd`; \ (cd ${.CURDIR} && ${MAKE} $@); \ echo Back in `pwd` Since bmake will chdir(2) to `.OBJDIR' before executing any targets, each child process starts with that as its current working directory. VARIABLE ASSIGNMENTS Variables in make are much like variables in the shell, and, by tradi- tion, consist of all upper-case letters. Variable assignment modifiers The five operators that can be used to assign values to variables are as follows: = Assign the value to the variable. Any previous value is overrid- den. += Append the value to the current value of the variable. ?= Assign the value to the variable if it is not already defined. := Assign with expansion, i.e. expand the value before assigning it to the variable. Normally, expansion is not done until the vari- able is referenced. NOTE: References to undefined variables are not expanded. This can cause problems when variable modifiers are used. != Expand the value and pass it to the shell for execution and as- sign the result to the variable. Any newlines in the result are replaced with spaces. Any white-space before the assigned value is removed; if the value is be- ing appended, a single space is inserted between the previous contents of the variable and the appended value. Variables are expanded by surrounding the variable name with either curly braces (`{}') or parentheses (`()') and preceding it with a dollar sign (`$'). If the variable name contains only a single letter, the surround- ing braces or parentheses are not required. This shorter form is not recommended. If the variable name contains a dollar, then the name itself is expanded first. This allows almost arbitrary variable names, however names con- taining dollar, braces, parentheses, or whitespace are really best avoided! If the result of expanding a variable contains a dollar sign (`$') the string is expanded again. Variable substitution occurs at three distinct times, depending on where the variable is being used. 1. Variables in dependency lines are expanded as the line is read. 2. Variables in shell commands are expanded when the shell command is executed. 3. ".for" loop index variables are expanded on each loop iteration. Note that other variables are not expanded inside loops so the fol- lowing example code: .for i in 1 2 3 a+= ${i} j= ${i} b+= ${j} .endfor all: @echo ${a} @echo ${b} will print: 1 2 3 3 3 3 Because while ${a} contains "1 2 3" after the loop is executed, ${b} contains "${j} ${j} ${j}" which expands to "3 3 3" since after the loop completes ${j} contains "3". Variable classes The four different classes of variables (in order of increasing prece- dence) are: Environment variables Variables defined as part of bmake's environment. Global variables Variables defined in the makefile or in included makefiles. Command line variables Variables defined as part of the command line. Local variables Variables that are defined specific to a certain target. Local variables are all built in and their values vary magically from target to target. It is not currently possible to define new local vari- ables. The seven local variables are as follows: .ALLSRC The list of all sources for this target; also known as `>'. .ARCHIVE The name of the archive file; also known as `!'. .IMPSRC In suffix-transformation rules, the name/path of the source from which the target is to be transformed (the "implied" source); also known as `<'. It is not defined in explicit rules. .MEMBER The name of the archive member; also known as `%'. .OODATE The list of sources for this target that were deemed out- of-date; also known as `?'. .PREFIX The file prefix of the target, containing only the file portion, no suffix or preceding directory components; also known as `*'. The suffix must be one of the known suffixes declared with .SUFFIXES or it will not be recog- nized. .TARGET The name of the target; also known as `@'. For compati- bility with other makes this is an alias for .ARCHIVE in archive member rules. The shorter forms (`>', `!', `<', `%', `?', `*', and `@') are permitted for backward compatibility with historical makefiles and legacy POSIX make and are not recommended. Variants of these variables with the punctuation followed immediately by `D' or `F', e.g. `$(@D)', are legacy forms equivalent to using the `:H' and `:T' modifiers. These forms are accepted for compatibility with AT&T System V UNIX makefiles and POSIX but are not recommended. Four of the local variables may be used in sources on dependency lines because they expand to the proper value for each target on the line. These variables are `.TARGET', `.PREFIX', `.ARCHIVE', and `.MEMBER'. Additional built-in variables In addition, bmake sets or knows about the following variables: $ A single dollar sign `$', i.e. `$$' expands to a single dollar sign. .ALLTARGETS The list of all targets encountered in the Makefile. If evaluated during Makefile parsing, lists only those tar- gets encountered thus far. .CURDIR A path to the directory where bmake was executed. Refer to the description of `PWD' for more details. .INCLUDEDFROMDIR The directory of the file this Makefile was included from. .INCLUDEDFROMFILE The filename of the file this Makefile was included from. MAKE The name that bmake was executed with (argv[0]). For compatibility bmake also sets .MAKE with the same value. The preferred variable to use is the environment variable MAKE because it is more compatible with other versions of bmake and cannot be confused with the special target with the same name. .MAKE.DEPENDFILE Names the makefile (default `.depend') from which gener- ated dependencies are read. .MAKE.EXPAND_VARIABLES A boolean that controls the default behavior of the -V option. If true, variable values printed with -V are fully expanded; if false, the raw variable contents (which may include additional unexpanded variable refer- ences) are shown. .MAKE.EXPORTED The list of variables exported by bmake. .MAKE.JOBS The argument to the -j option. .MAKE.JOB.PREFIX If bmake is run with j then output for each target is prefixed with a token `--- target ---' the first part of which can be controlled via .MAKE.JOB.PREFIX. If .MAKE.JOB.PREFIX is empty, no token is printed. For example: .MAKE.JOB.PREFIX=${.newline}---${.MAKE:T}[${.MAKE.PID}] would produce tokens like `---make[1234] target ---' mak- ing it easier to track the degree of parallelism being achieved. MAKEFLAGS The environment variable `MAKEFLAGS' may contain anything that may be specified on bmake's command line. Anything specified on bmake's command line is appended to the `MAKEFLAGS' variable which is then entered into the envi- ronment for all programs which bmake executes. .MAKE.LEVEL The recursion depth of bmake. The initial instance of bmake will be 0, and an incremented value is put into the environment to be seen by the next generation. This al- lows tests like: .if ${.MAKE.LEVEL} == 0 to protect things which should only be evaluated in the initial in- stance of bmake. .MAKE.MAKEFILE_PREFERENCE The ordered list of makefile names (default `makefile', `Makefile') that bmake will look for. .MAKE.MAKEFILES The list of makefiles read by bmake, which is useful for tracking dependencies. Each makefile is recorded only once, regardless of the number of times read. .MAKE.MODE Processed after reading all makefiles. Can affect the mode that bmake runs in. It can contain a number of key- words: compat Like -B, puts bmake into "compat" mode. meta Puts bmake into "meta" mode, where meta files are created for each tar- get to capture the command run, the output generated and if filemon(4) is available, the system calls which are of interest to bmake. The cap- tured output can be very useful when diagnosing errors. curdirOk= bf Normally bmake will not create .meta files in `.CURDIR'. This can be overridden by setting bf to a value which represents True. missing-meta= bf If bf is True, then a missing .meta file makes the target out-of-date. missing-filemon= bf If bf is True, then missing filemon data makes the target out-of-date. nofilemon Do not use filemon(4). env For debugging, it can be useful to include the environment in the .meta file. verbose If in "meta" mode, print a clue about the target being built. This is useful if the build is otherwise running silently. The message printed the value of: .MAKE.META.PREFIX. ignore-cmd Some makefiles have commands which are simply not stable. This keyword causes them to be ignored for deter- mining whether a target is out of date in "meta" mode. See also .NOMETA_CMP. silent= bf If bf is True, when a .meta file is created, mark the target .SILENT. .MAKE.META.BAILIWICK In "meta" mode, provides a list of prefixes which match the directories controlled by bmake. If a file that was generated outside of .OBJDIR but within said bailiwick is missing, the current target is considered out-of-date. .MAKE.META.CREATED In "meta" mode, this variable contains a list of all the meta files updated. If not empty, it can be used to trigger processing of .MAKE.META.FILES. .MAKE.META.FILES In "meta" mode, this variable contains a list of all the meta files used (updated or not). This list can be used to process the meta files to extract dependency informa- tion. .MAKE.META.IGNORE_PATHS Provides a list of path prefixes that should be ignored; because the contents are expected to change over time. The default list includes: `/dev /etc /proc /tmp /var/run /var/tmp' .MAKE.META.IGNORE_PATTERNS Provides a list of patterns to match against pathnames. Ignore any that match. .MAKE.META.IGNORE_FILTER Provides a list of variable modifiers to apply to each pathname. Ignore if the expansion is an empty string. .MAKE.META.PREFIX Defines the message printed for each meta file updated in "meta verbose" mode. The default value is: Building ${.TARGET:H:tA}/${.TARGET:T} .MAKEOVERRIDES This variable is used to record the names of variables assigned to on the command line, so that they may be ex- ported as part of `MAKEFLAGS'. This behavior can be dis- abled by assigning an empty value to `.MAKEOVERRIDES' within a makefile. Extra variables can be exported from a makefile by appending their names to `.MAKEOVERRIDES'. `MAKEFLAGS' is re-exported whenever `.MAKEOVERRIDES' is modified. .MAKE.PATH_FILEMON If bmake was built with filemon(4) support, this is set to the path of the device node. This allows makefiles to test for this support. .MAKE.PID The process-id of bmake. .MAKE.PPID The parent process-id of bmake. .MAKE.SAVE_DOLLARS value should be a boolean that controls whether `$$' are preserved when doing `:=' assignments. The default is false, for backwards compatibility. Set to true for com- patability with other makes. If set to false, `$$' be- comes `$' per normal evaluation rules. .MAKE.UID The user-id running bmake. .MAKE.GID The group-id running bmake. MAKE_PRINT_VAR_ON_ERROR When bmake stops due to an error, it sets `.ERROR_TARGET' to the name of the target that failed, `.ERROR_CMD' to the commands of the failed target, and in "meta" mode, it also sets `.ERROR_CWD' to the getcwd(3), and `.ERROR_META_FILE' to the path of the meta file (if any) describing the failed target. It then prints its name and the value of `.CURDIR' as well as the value of any variables named in `MAKE_PRINT_VAR_ON_ERROR'. .newline This variable is simply assigned a newline character as its value. This allows expansions using the :@ modifier to put a newline between iterations of the loop rather than a space. For example, the printing of `MAKE_PRINT_VAR_ON_ERROR' could be done as ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@}. .OBJDIR A path to the directory where the targets are built. Its value is determined by trying to chdir(2) to the follow- ing directories in order and using the first match: 1. ${MAKEOBJDIRPREFIX}${.CURDIR} (Only if `MAKEOBJDIRPREFIX' is set in the environ- ment or on the command line.) 2. ${MAKEOBJDIR} (Only if `MAKEOBJDIR' is set in the environment or on the command line.) 3. ${.CURDIR}/obj.${MACHINE} 4. ${.CURDIR}/obj 5. /usr/obj/${.CURDIR} 6. ${.CURDIR} Variable expansion is performed on the value before it's used, so expressions such as ${.CURDIR:S,^/usr/src,/var/obj,} may be used. This is especially useful with `MAKEOBJDIR'. `.OBJDIR' may be modified in the makefile via the special target `.OBJDIR'. In all cases, bmake will chdir(2) to the specified directory if it exists, and set `.OBJDIR' and `PWD' to that directory before executing any targets. Except in the case of an explicit `.OBJDIR' target, bmake will check that the specified directory is writable and ignore it if not. This check can be skipped by setting the environment variable `MAKE_OBJDIR_CHECK_WRITABLE' to "no". .PARSEDIR A path to the directory of the current `Makefile' being parsed. .PARSEFILE The basename of the current `Makefile' being parsed. This variable and `.PARSEDIR' are both set only while the `Makefiles' are being parsed. If you want to retain their current values, assign them to a variable using as- signment with expansion: (`:='). .PATH A variable that represents the list of directories that bmake will search for files. The search list should be updated using the target `.PATH' rather than the vari- able. PWD Alternate path to the current directory. bmake normally sets `.CURDIR' to the canonical path given by getcwd(3). However, if the environment variable `PWD' is set and gives a path to the current directory, then bmake sets `.CURDIR' to the value of `PWD' instead. This behavior is disabled if `MAKEOBJDIRPREFIX' is set or `MAKEOBJDIR' contains a variable transform. `PWD' is set to the value of `.OBJDIR' for all programs which bmake executes. .SHELL The pathname of the shell used to run target scripts. It is read-only. + .SUFFIXES The list of known suffixes. It is read-only. + .TARGETS The list of targets explicitly specified on the command line, if any. VPATH Colon-separated (":") lists of directories that bmake will search for files. The variable is supported for compatibility with old make programs only, use `.PATH' instead. Variable modifiers Variable expansion may be modified to select or modify each word of the variable (where a "word" is white-space delimited sequence of charac- ters). The general format of a variable expansion is as follows: ${variable[:modifier[:...]]} Each modifier begins with a colon, which may be escaped with a backslash (`\'). A set of modifiers can be specified via a variable, as follows: modifier_variable=modifier[:...] ${variable:${modifier_variable}[:...]} In this case the first modifier in the modifier_variable does not start with a colon, since that must appear in the referencing variable. If any of the modifiers in the modifier_variable contain a dollar sign (`$'), these must be doubled to avoid early expansion. The supported modifiers are: :E Replaces each word in the variable with its suffix. :H Replaces each word in the variable with everything but the last com- ponent. :Mpattern Selects only those words that match pattern. The standard shell wildcard characters (`*', `?', and `[]') may be used. The wildcard characters may be escaped with a backslash (`\'). As a consequence of the way values are split into words, matched, and then joined, a construct like ${VAR:M*} will normalize the inter-word spacing, removing all leading and trailing space, and converting multiple consecutive spaces to single spaces. :Npattern This is identical to `:M', but selects all words which do not match pattern. :O Orders every word in variable alphabetically. + :On Orders every word in variable numerically. A number followed by one + of `k', `M' or `G' is multiplied by the appropriate factor (1024 + (k), 1048576 (M), or 1073741824 (G)). Both upper- and lower-case + letters are accepted. + :Or Orders every word in variable in reverse alphabetical order. + :Orn + Orders every word in variable in reverse numerical order. + :Ox Shuffles the words in variable. The results will be different each time you are referring to the modified variable; use the assignment with expansion (`:=') to prevent such behavior. For example, LIST= uno due tre quattro RANDOM_LIST= ${LIST:Ox} STATIC_RANDOM_LIST:= ${LIST:Ox} all: @echo "${RANDOM_LIST}" @echo "${RANDOM_LIST}" @echo "${STATIC_RANDOM_LIST}" @echo "${STATIC_RANDOM_LIST}" may produce output similar to: quattro due tre uno tre due quattro uno due uno quattro tre due uno quattro tre :Q Quotes every shell meta-character in the variable, so that it can be passed safely to the shell. :q Quotes every shell meta-character in the variable, and also doubles `$' characters so that it can be passed safely through recursive in- vocations of bmake. This is equivalent to: `:S/\$/&&/g:Q'. :R Replaces each word in the variable with everything but its suffix. :range[=count] The value is an integer sequence representing the words of the orig- inal value, or the supplied count. :gmtime[=utc] The value is a format string for strftime(3), using gmtime(3). If a utc value is not provided or is 0, the current time is used. :hash Computes a 32-bit hash of the value and encode it as hex digits. :localtime[=utc] The value is a format string for strftime(3), using localtime(3). If a utc value is not provided or is 0, the current time is used. :tA Attempts to convert variable to an absolute path using realpath(3), if that fails, the value is unchanged. :tl Converts variable to lower-case letters. :tsc Words in the variable are normally separated by a space on expan- sion. This modifier sets the separator to the character c. If c is omitted, then no separator is used. The common escapes (including octal numeric codes) work as expected. :tu Converts variable to upper-case letters. :tW Causes the value to be treated as a single word (possibly containing embedded white space). See also `:[*]'. :tw Causes the value to be treated as a sequence of words delimited by white space. See also `:[@]'. :S/old_string/new_string/[1gW] Modifies the first occurrence of old_string in each word of the variable's value, replacing it with new_string. If a `g' is ap- pended to the last delimiter of the pattern, all occurrences in each word are replaced. If a `1' is appended to the last delimiter of the pattern, only the first occurrence is affected. If a `W' is ap- pended to the last delimiter of the pattern, then the value is treated as a single word (possibly containing embedded white space). If old_string begins with a caret (`^'), old_string is anchored at the beginning of each word. If old_string ends with a dollar sign (`$'), it is anchored at the end of each word. Inside new_string, an ampersand (`&') is replaced by old_string (without any `^' or `$'). Any character may be used as a delimiter for the parts of the modifier string. The anchoring, ampersand and delimiter characters may be escaped with a backslash (`\'). Variable expansion occurs in the normal fashion inside both old_string and new_string with the single exception that a backslash is used to prevent the expansion of a dollar sign (`$'), not a pre- ceding dollar sign as is usual. :C/pattern/replacement/[1gW] The :C modifier is just like the :S modifier except that the old and new strings, instead of being simple strings, are an extended regu- lar expression (see regex(3)) string pattern and an ed(1)-style string replacement. Normally, the first occurrence of the pattern pattern in each word of the value is substituted with replacement. The `1' modifier causes the substitution to apply to at most one word; the `g' modifier causes the substitution to apply to as many instances of the search pattern pattern as occur in the word or words it is found in; the `W' modifier causes the value to be treated as a single word (possibly containing embedded white space). As for the :S modifier, the pattern and replacement are subjected to variable expansion before being parsed as regular expressions. :T Replaces each word in the variable with its last path component. :u Removes adjacent duplicate words (like uniq(1)). :?true_string:false_string If the variable name (not its value), when parsed as a .if condi- tional expression, evaluates to true, return as its value the true_string, otherwise return the false_string. Since the variable name is used as the expression, :? must be the first modifier after the variable name itself - which will, of course, usually contain variable expansions. A common error is trying to use expressions like ${NUMBERS:M42:?match:no} which actually tests defined(NUMBERS), to determine if any words match "42" you need to use something like: ${"${NUMBERS:M42}" != "":?match:no}. :old_string=new_string This is the AT&T System V UNIX style variable substitution. It must be the last modifier specified. If old_string or new_string do not contain the pattern matching character % then it is assumed that they are anchored at the end of each word, so only suffixes or en- tire words may be replaced. Otherwise % is the substring of old_string to be replaced in new_string. If only old_string con- tains the pattern matching character %, and old_string matches, then the result is the new_string. If only the new_string contains the pattern matching character %, then it is not treated specially and it is printed as a literal % on match. If there is more than one pattern matching character (%) in either the new_string or old_string, only the first instance is treated specially (as the pattern character); all subsequent instances are treated as regular characters. Variable expansion occurs in the normal fashion inside both old_string and new_string with the single exception that a backslash is used to prevent the expansion of a dollar sign (`$'), not a pre- ceding dollar sign as is usual. :@temp@string@ This is the loop expansion mechanism from the OSF Development Envi- ronment (ODE) make. Unlike .for loops, expansion occurs at the time of reference. Assigns temp to each word in the variable and evalu- ates string. The ODE convention is that temp should start and end with a period. For example. ${LINKS:@.LINK.@${LN} ${TARGET} ${.LINK.}@} However a single character variable is often more readable: ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@} :_[=var] Saves the current variable value in `$_' or the named var for later reference. Example usage: M_cmpv.units = 1 1000 1000000 M_cmpv = S,., ,g:_:range:@i@+ $${_:[-$$i]} \ \* $${M_cmpv.units:[$$i]}@:S,^,expr 0 ,1:sh .if ${VERSION:${M_cmpv}} < ${3.1.12:L:${M_cmpv}} Here `$_' is used to save the result of the `:S' modifier which is later referenced using the index values from `:range'. :Unewval If the variable is undefined, newval is the value. If the variable is defined, the existing value is returned. This is another ODE make feature. It is handy for setting per-target CFLAGS for in- stance: ${_${.TARGET:T}_CFLAGS:U${DEF_CFLAGS}} If a value is only required if the variable is undefined, use: ${VAR:D:Unewval} :Dnewval If the variable is defined, newval is the value. :L The name of the variable is the value. :P The path of the node which has the same name as the variable is the value. If no such node exists or its path is null, then the name of the variable is used. In order for this modifier to work, the name (node) must at least have appeared on the rhs of a dependency. :!cmd! The output of running cmd is the value. :sh If the variable is non-empty it is run as a command and the output becomes the new value. ::=str The variable is assigned the value str after substitution. This modifier and its variations are useful in obscure situations such as wanting to set a variable when shell commands are being parsed. These assignment modifiers always expand to nothing, so if appearing in a rule line by themselves should be preceded with something to keep bmake happy. The `::' helps avoid false matches with the AT&T System V UNIX style := modifier and since substitution always occurs the ::= form is vaguely appropriate. ::?=str As for ::= but only if the variable does not already have a value. ::+=str Append str to the variable. ::!=cmd Assign the output of cmd to the variable. :[range] Selects one or more words from the value, or performs other opera- tions related to the way in which the value is divided into words. Ordinarily, a value is treated as a sequence of words delimited by white space. Some modifiers suppress this behavior, causing a value to be treated as a single word (possibly containing embedded white space). An empty value, or a value that consists entirely of white- space, is treated as a single word. For the purposes of the `:[]' modifier, the words are indexed both forwards using positive inte- gers (where index 1 represents the first word), and backwards using negative integers (where index -1 represents the last word). The range is subjected to variable expansion, and the expanded re- sult is then interpreted as follows: index Selects a single word from the value. start..end Selects all words from start to end, inclusive. For example, `:[2..-1]' selects all words from the second word to the last word. If start is greater than end, then the words are out- put in reverse order. For example, `:[-1..1]' selects all the words from last to first. If the list is already or- dered, then this effectively reverses the list, but it is more efficient to use `:Or' instead of `:O:[-1..1]'. * Causes subsequent modifiers to treat the value as a single word (possibly containing embedded white space). Analogous to the effect of "$*" in Bourne shell. 0 Means the same as `:[*]'. @ Causes subsequent modifiers to treat the value as a sequence of words delimited by white space. Analogous to the effect of "$@" in Bourne shell. # Returns the number of words in the value. INCLUDE STATEMENTS, CONDITIONALS AND FOR LOOPS Makefile inclusion, conditional structures and for loops reminiscent of the C programming language are provided in bmake. All such structures are identified by a line beginning with a single dot (`.') character. Files are included with either .include <file> or .include "file". Vari- ables between the angle brackets or double quotes are expanded to form the file name. If angle brackets are used, the included makefile is ex- pected to be in the system makefile directory. If double quotes are used, the including makefile's directory and any directories specified using the -I option are searched before the system makefile directory. For compatibility with other versions of bmake `include file ...' is also accepted. If the include statement is written as .-include or as .sinclude then er- rors locating and/or opening include files are ignored. If the include statement is written as .dinclude not only are errors lo- cating and/or opening include files ignored, but stale dependencies within the included file will be ignored just like .MAKE.DEPENDFILE. Conditional expressions are also preceded by a single dot as the first character of a line. The possible conditionals are as follows: .error message The message is printed along with the name of the makefile and line number, then bmake will exit immediately. .export variable ... Export the specified global variable. If no variable list is provided, all globals are exported except for internal variables (those that start with `.'). This is not affected by the -X flag, so should be used with caution. For compatibility with other bmake programs `export variable=value' is also accepted. Appending a variable name to .MAKE.EXPORTED is equivalent to ex- porting a variable. .export-env variable ... The same as `.export', except that the variable is not appended to .MAKE.EXPORTED. This allows exporting a value to the environ- ment which is different from that used by bmake internally. .export-literal variable ... The same as `.export-env', except that variables in the value are not expanded. .info message The message is printed along with the name of the makefile and line number. .undef variable ... Un-define the specified global variables. Only global variables can be un-defined. .unexport variable ... The opposite of `.export'. The specified global variable will be removed from .MAKE.EXPORTED. If no variable list is provided, all globals are unexported, and .MAKE.EXPORTED deleted. .unexport-env Unexport all globals previously exported and clear the environ- ment inherited from the parent. This operation will cause a mem- ory leak of the original environment, so should be used spar- ingly. Testing for .MAKE.LEVEL being 0, would make sense. Also note that any variables which originated in the parent environ- ment should be explicitly preserved if desired. For example: .if ${.MAKE.LEVEL} == 0 PATH := ${PATH} .unexport-env .export PATH .endif Would result in an environment containing only `PATH', which is the minimal useful environment. Actually `.MAKE.LEVEL' will also be pushed into the new environment. .warning message The message prefixed by `warning:' is printed along with the name of the makefile and line number. .if [!]expression [operator expression ...] Test the value of an expression. .ifdef [!]variable [operator variable ...] Test the value of a variable. .ifndef [!]variable [operator variable ...] Test the value of a variable. .ifmake [!]target [operator target ...] Test the target being built. .ifnmake [!] target [operator target ...] Test the target being built. .else Reverse the sense of the last conditional. .elif [!] expression [operator expression ...] A combination of `.else' followed by `.if'. .elifdef [!]variable [operator variable ...] A combination of `.else' followed by `.ifdef'. .elifndef [!]variable [operator variable ...] A combination of `.else' followed by `.ifndef'. .elifmake [!]target [operator target ...] A combination of `.else' followed by `.ifmake'. .elifnmake [!]target [operator target ...] A combination of `.else' followed by `.ifnmake'. .endif End the body of the conditional. The operator may be any one of the following: || Logical OR. && Logical AND; of higher precedence than "||". As in C, bmake will only evaluate a conditional as far as is necessary to determine its value. Parentheses may be used to change the order of evaluation. The boolean operator `!' may be used to logically negate an entire conditional. It is of higher precedence than `&&'. The value of expression may be any of the following: defined Takes a variable name as an argument and evaluates to true if the variable has been defined. make Takes a target name as an argument and evaluates to true if the target was specified as part of bmake's command line or was de- clared the default target (either implicitly or explicitly, see .MAIN) before the line containing the conditional. empty Takes a variable, with possible modifiers, and evaluates to true if the expansion of the variable would result in an empty string. exists Takes a file name as an argument and evaluates to true if the file exists. The file is searched for on the system search path (see .PATH). target Takes a target name as an argument and evaluates to true if the target has been defined. commands Takes a target name as an argument and evaluates to true if the target has been defined and has commands associated with it. Expression may also be an arithmetic or string comparison. Variable ex- pansion is performed on both sides of the comparison, after which the nu- merical values are compared. A value is interpreted as hexadecimal if it is preceded by 0x, otherwise it is decimal; octal numbers are not sup- ported. The standard C relational operators are all supported. If after variable expansion, either the left or right hand side of a `==' or `!=' operator is not a numerical value, then string comparison is performed between the expanded variables. If no relational operator is given, it is assumed that the expanded variable is being compared against 0, or an empty string in the case of a string comparison. When bmake is evaluating one of these conditional expressions, and it en- counters a (white-space separated) word it doesn't recognize, either the "make" or "defined" expression is applied to it, depending on the form of the conditional. If the form is `.ifdef', `.ifndef', or `.if' the "defined" expression is applied. Similarly, if the form is `.ifmake' or `.ifnmake', the "make" expression is applied. If the conditional evaluates to true the parsing of the makefile contin- ues as before. If it evaluates to false, the following lines are skipped. In both cases this continues until a `.else' or `.endif' is found. For loops are typically used to apply a set of rules to a list of files. The syntax of a for loop is: .for variable [variable ...] in expression .endfor After the for expression is evaluated, it is split into words. On each iteration of the loop, one word is taken and assigned to each variable, in order, and these variables are substituted into the make-lines inside the body of the for loop. The number of words must come out even; that is, if there are three iteration variables, the number of words provided must be a multiple of three. COMMENTS Comments begin with a hash (`#') character, anywhere but in a shell com- mand line, and continue to the end of an unescaped new line. SPECIAL SOURCES (ATTRIBUTES) .EXEC Target is never out of date, but always execute commands any- way. .IGNORE Ignore any errors from the commands associated with this tar- get, exactly as if they all were preceded by a dash (`-'). .MADE Mark all sources of this target as being up-to-date. .MAKE Execute the commands associated with this target even if the -n or -t options were specified. Normally used to mark recursive bmakes. .META Create a meta file for the target, even if it is flagged as .PHONY, .MAKE, or .SPECIAL. Usage in conjunction with .MAKE is the most likely case. In "meta" mode, the target is out-of- date if the meta file is missing. .NOMETA Do not create a meta file for the target. Meta files are also not created for .PHONY, .MAKE, or .SPECIAL targets. .NOMETA_CMP Ignore differences in commands when deciding if target is out of date. This is useful if the command contains a value which always changes. If the number of commands change, though, the target will still be out of date. The same effect applies to any command line that uses the variable .OODATE, which can be used for that purpose even when not otherwise needed or de- sired: skip-compare-for-some: @echo this will be compared @echo this will not ${.OODATE:M.NOMETA_CMP} @echo this will also be compared The :M pattern suppresses any expansion of the unwanted vari- able. .NOPATH Do not search for the target in the directories specified by .PATH. .NOTMAIN Normally bmake selects the first target it encounters as the default target to be built if no target was specified. This source prevents this target from being selected. .OPTIONAL If a target is marked with this attribute and bmake can't fig- ure out how to create it, it will ignore this fact and assume the file isn't needed or already exists. .PHONY The target does not correspond to an actual file; it is always considered to be out of date, and will not be created with the -t option. Suffix-transformation rules are not applied to .PHONY targets. .PRECIOUS When bmake is interrupted, it normally removes any partially made targets. This source prevents the target from being re- moved. .RECURSIVE Synonym for .MAKE. .SILENT Do not echo any of the commands associated with this target, exactly as if they all were preceded by an at sign (`@'). .USE Turn the target into bmake's version of a macro. When the tar- get is used as a source for another target, the other target acquires the commands, sources, and attributes (except for .USE) of the source. If the target already has commands, the .USE target's commands are appended to them. .USEBEFORE Exactly like .USE, but prepend the .USEBEFORE target commands to the target. .WAIT If .WAIT appears in a dependency line, the sources that precede it are made before the sources that succeed it in the line. Since the dependents of files are not made until the file it- self could be made, this also stops the dependents being built unless they are needed for another branch of the dependency tree. So given: x: a .WAIT b echo x a: echo a b: b1 echo b b1: echo b1 the output is always `a', `b1', `b', `x'. The ordering imposed by .WAIT is only relevant for parallel makes. SPECIAL TARGETS Special targets may not be included with other targets, i.e. they must be the only target specified. .BEGIN Any command lines attached to this target are executed before anything else is done. .DEFAULT This is sort of a .USE rule for any target (that was used only as a source) that bmake can't figure out any other way to cre- ate. Only the shell script is used. The .IMPSRC variable of a target that inherits .DEFAULT's commands is set to the target's own name. .DELETE_ON_ERROR If this target is present in the makefile, it globally causes make to delete targets whose commands fail. (By default, only targets whose commands are interrupted during execution are deleted. This is the historical behavior.) This setting can be used to help prevent half-finished or malformed targets from be- ing left around and corrupting future rebuilds. .END Any command lines attached to this target are executed after ev- erything else is done. .ERROR Any command lines attached to this target are executed when an- other target fails. The .ERROR_TARGET variable is set to the target that failed. See also MAKE_PRINT_VAR_ON_ERROR. .IGNORE Mark each of the sources with the .IGNORE attribute. If no sources are specified, this is the equivalent of specifying the -i option. .INTERRUPT If bmake is interrupted, the commands for this target will be executed. .MAIN If no target is specified when bmake is invoked, this target will be built. .MAKEFLAGS This target provides a way to specify flags for bmake when the makefile is used. The flags are as if typed to the shell, though the -f option will have no effect. .NOPATH Apply the .NOPATH attribute to any specified sources. .NOTPARALLEL Disable parallel mode. .NO_PARALLEL Synonym for .NOTPARALLEL, for compatibility with other pmake variants. .OBJDIR The source is a new value for `.OBJDIR'. If it exists, bmake will chdir(2) to it and update the value of `.OBJDIR'. .ORDER The named targets are made in sequence. This ordering does not add targets to the list of targets to be made. Since the depen- dents of a target do not get built until the target itself could be built, unless `a' is built by another part of the dependency graph, the following is a dependency loop: .ORDER: b a b: a The ordering imposed by .ORDER is only relevant for parallel makes. .PATH The sources are directories which are to be searched for files not found in the current directory. If no sources are speci- fied, any previously specified directories are deleted. If the source is the special .DOTLAST target, then the current working directory is searched last. .PATH.suffix Like .PATH but applies only to files with a particular suffix. The suffix must have been previously declared with .SUFFIXES. .PHONY Apply the .PHONY attribute to any specified sources. .PRECIOUS Apply the .PRECIOUS attribute to any specified sources. If no sources are specified, the .PRECIOUS attribute is applied to ev- ery target in the file. .SHELL Sets the shell that bmake will use to execute commands. The sources are a set of field=value pairs. name This is the minimal specification, used to select one of the built-in shell specs; sh, ksh, and csh. path Specifies the path to the shell. hasErrCtl Indicates whether the shell supports exit on error. check The command to turn on error checking. ignore The command to disable error checking. echo The command to turn on echoing of commands executed. quiet The command to turn off echoing of commands exe- cuted. filter The output to filter after issuing the quiet com- mand. It is typically identical to quiet. errFlag The flag to pass the shell to enable error checking. echoFlag The flag to pass the shell to enable command echo- ing. newline The string literal to pass the shell that results in a single newline character when used outside of any quoting characters. Example: .SHELL: name=ksh path=/bin/ksh hasErrCtl=true \ check="set -e" ignore="set +e" \ echo="set -v" quiet="set +v" filter="set +v" \ echoFlag=v errFlag=e newline="'\n'" .SILENT Apply the .SILENT attribute to any specified sources. If no sources are specified, the .SILENT attribute is applied to every command in the file. .STALE This target gets run when a dependency file contains stale en- tries, having .ALLSRC set to the name of that dependency file. .SUFFIXES Each source specifies a suffix to bmake. If no sources are specified, any previously specified suffixes are deleted. It allows the creation of suffix-transformation rules. Example: .SUFFIXES: .o .c.o: cc -o ${.TARGET} -c ${.IMPSRC} ENVIRONMENT bmake uses the following environment variables, if they exist: MACHINE, MACHINE_ARCH, MAKE, MAKEFLAGS, MAKEOBJDIR, MAKEOBJDIRPREFIX, MAKESYSPATH, PWD, and TMPDIR. MAKEOBJDIRPREFIX and MAKEOBJDIR may only be set in the environment or on the command line to bmake and not as makefile variables; see the descrip- tion of `.OBJDIR' for more details. FILES .depend list of dependencies Makefile list of dependencies makefile list of dependencies sys.mk system makefile /usr/share/mk system makefile directory COMPATIBILITY The basic make syntax is compatible between different versions of make; however the special variables, variable modifiers and conditionals are not. Older versions An incomplete list of changes in older versions of bmake: The way that .for loop variables are substituted changed after NetBSD 5.0 so that they still appear to be variable expansions. In particular this stops them being treated as syntax, and removes some obscure problems us- ing them in .if statements. The way that parallel makes are scheduled changed in NetBSD 4.0 so that .ORDER and .WAIT apply recursively to the dependent nodes. The algo- rithms used may change again in the future. Other make dialects Other make dialects (GNU make, SVR4 make, POSIX make, etc.) do not sup- port most of the features of bmake as described in this manual. Most no- tably: +o The .WAIT and .ORDER declarations and most functionality per- taining to parallelization. (GNU make supports parallelization but lacks these features needed to control it effectively.) +o Directives, including for loops and conditionals and most of the forms of include files. (GNU make has its own incompatible and less powerful syntax for conditionals.) +o All built-in variables that begin with a dot. +o Most of the special sources and targets that begin with a dot, with the notable exception of .PHONY, .PRECIOUS, and .SUFFIXES. +o Variable modifiers, except for the :old=new string substitution, which does not portably support globbing with `%' and historically only works on declared suffixes. +o The $> variable even in its short form; most makes support this functionality but its name varies. Some features are somewhat more portable, such as assignment with +=, ?=, and !=. The .PATH functionality is based on an older feature VPATH found in GNU make and many versions of SVR4 make; however, historically its be- havior is too ill-defined (and too buggy) to rely upon. The $@ and $< variables are more or less universally portable, as is the $(MAKE) variable. Basic use of suffix rules (for files only in the cur- rent directory, not trying to chain transformations together, etc.) is also reasonably portable. SEE ALSO mkdep(1) HISTORY bmake is derived from NetBSD make(1). It uses autoconf to facilitate portability to other platforms. A make command appeared in Version 7 AT&T UNIX. This make implementation is based on Adam De Boor's pmake program which was written for Sprite at Berkeley. It was designed to be a parallel distributed make running jobs on different machines using a daemon called "customs". Historically the target/dependency "FRC" has been used to FoRCe rebuild- ing (since the target/dependency does not exist... unless someone creates an "FRC" file). BUGS The make syntax is difficult to parse without actually acting on the data. For instance, finding the end of a variable's use should involve scanning each of the modifiers, using the correct terminator for each field. In many places make just counts {} and () in order to find the end of a variable expansion. There is no way of escaping a space character in a filename. -FreeBSD 13.0 December 22, 2020 FreeBSD 13.0 +FreeBSD 13.0 December 12, 2021 FreeBSD 13.0 diff --git a/contrib/bmake/boot-strap b/contrib/bmake/boot-strap index d251649db670..40984edcbe62 100755 --- a/contrib/bmake/boot-strap +++ b/contrib/bmake/boot-strap @@ -1,487 +1,476 @@ : # NAME: # boot-strap # # SYNOPSIS: # boot-strap ["options"] # boot-strap --prefix=/opt --install # boot-strap --prefix=$HOME --install-host-target -DWITH_PROG_VERSION # boot-strap ["options"] op=build # boot-strap ["options"] op=install # # DESCRIPTION: # This script is used to configure/build bmake it builds for # each host-target in a different subdir to keep the src clean. # There is no requirement for an existing make(1). # # On successful completion if no '--install' flag is given, # it echos a command to do installation. # # The variable "op" defaults to 'all', and is affected by # '--install' flag as above. # Other values include: # # configure # Just run 'configure' # # build # If 'configure' has not been done, do it, then # run the build script, and finally 'test'. # # install # If 'build' has not been done, do it, 'test' then # install. # # clean # attempt to clean up # # test # run the unit-tests. Done automatically after 'build' # and before 'install'. # # The above are leveraged by a trivial makefile for the benefit # of those that have './configure; make; make install' baked # into them. # # Options: # # -c "rc" # Pick up settings from "rc". # We look for '.bmake-boot-strap.rc' before processing # options (unless SKIP_RC is set in environment). # # --share "share_dir" # Where to put man pages and mk files. # If $prefix ends in $HOST_TARGET, and $prefix/../share # exits, the default will be that rather than $prefix/share. # # --mksrc "mksrc" # Indicate where the mk files can be found. # Default is $Mydir/mk # # --install # If build and test work, run bmake install. # BINDIR=$prefix/bin # SHAREDIR=$prefix/share # # --install-host-target # As for '--install' but BINDIR=$prefix/$HOST_TARGET/bin # This is useful when $prefix/ is shared by multiple # machines. # # Flags relevant when installing: # # -DWITHOUT_INSTALL_MK # Skip installing mk files. # By default they will be installed to $prefix/share/mk # # -DWITH_PROG_VERSION # Install 'bmake' as 'bmake-$MAKE_VERSION' # A symlink will be made as 'bmake' unless # -DWITHOUT_PROG_LINK is set. # # Possibly useful configure_args: # # --without-meta # disable use of meta mode. # # --without-filemon # disable use of filemon(9) which is currently only # available for NetBSD and FreeBSD. # # --with-filemon=ktrace # on NetBSD or others with fktrace(2), use ktrace # version of filemon. # # --with-filemon="path/to/filemon.h" # enables use of filemon(9) by meta mode. # # --with-machine="machine" # set "machine" to override that determined by # machine.sh # # --with-force-machine="machine" # force "machine" even if uname(3) provides a value. # # --with-machine_arch="machine_arch" # set "machine_arch" to override that determined by # machine.sh # # --with-force_machine_arch="machine_arch" # force "machine_arch" to override that determined by # machine.sh # # --with-default-sys-path="syspath" # set an explicit default "syspath" which is where bmake # will look for sys.mk and friends. # # AUTHOR: # Simon J. Gerraty # RCSid: -# $Id: boot-strap,v 1.54 2020/11/13 21:47:25 sjg Exp $ +# $Id: boot-strap,v 1.57 2021/10/22 20:32:21 sjg Exp $ # # @(#) Copyright (c) 2001 Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # Mydir=`dirname $0` . "$Mydir/os.sh" case "$Mydir" in /*) ;; *) Mydir=`cd "$Mydir" && 'pwd'`;; esac Usage() { [ "$1" ] && echo "ERROR: $@" >&2 echo "Usage:" >&2 echo "$0 [-- ...][][--install]" >&2 exit 1 } Error() { echo "ERROR: $@" >&2 exit 1 } source_rc() { rc="$1"; shift for d in ${*:-""} do r="${d:+$d/}$rc" [ -f "$r" -a -s "$r" ] || continue echo "NOTE: reading $r" . "$r" break done } cmd_args="$@" # clear some things from the environment that we care about unset MAKEOBJDIR MAKEOBJDIRPREFIX # or that might be incompatible unset MAKE MAKEFLAGS # --install[-host-target] will set this INSTALL_PREFIX= # other things we pass to install step INSTALL_ARGS= CONFIGURE_ARGS= MAKESYSPATH= # pick a useful default prefix (for me at least ;-) for prefix in /opt/$HOST_TARGET "$HOME/$HOST_TARGET" /usr/pkg /usr/local "" do [ -d "${prefix:-.}" ] || continue case "$prefix" in */$HOST_TARGET) p=`dirname $prefix` if [ -d $p/share ]; then INSTALL_BIN=$HOST_TARGET/bin prefix=$p fi ;; esac echo "NOTE: default prefix=$prefix ${INSTALL_BIN:+INSTALL_BIN=$INSTALL_BIN}" break done srcdir=$Mydir mksrc=$Mydir/mk objdir= quiet=: ${SKIP_RC:+:} source_rc .bmake-boot-strap.rc . "$Mydir/.." "$HOME" get_optarg() { expr "x$1" : "x[^=]*=\\(.*\\)" } here=`'pwd'` if [ $here = $Mydir ]; then # avoid pollution OBJROOT=../ fi op=all BMAKE= while : do case "$1" in --) shift; break;; --help) sed -n -e "1d;/RCSid/,\$d" -e '/^#\.[a-z]/d' -e '/^#/s,^# *,,p' $0; exit 0;; --prefix) prefix="$2"; shift;; --prefix=*) prefix=`get_optarg "$1"`;; --src=*) srcdir=`get_optarg "$1"`;; --with-mksrc=*|--mksrc=*) mksrc=`get_optarg "$1"`;; --share=*) share_dir=`get_optarg "$1"`;; --share) share_dir="$2"; shift;; --with-default-sys-path=*) CONFIGURE_ARGS="$1";; --with-default-sys-path) CONFIGURE_ARGS="$1 $2";; --install) INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix};; --install-host-target) INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} INSTALL_BIN=$HOST_TARGET/bin;; --install-destdir=*) INSTALL_DESTDIR=`get_optarg "$1"`;; --install-prefix=*) INSTALL_PREFIX=`get_optarg "$1"`;; -DWITH*) INSTALL_ARGS="$INSTALL_ARGS $1";; -s|--src) srcdir="$2"; shift;; -m|--mksrc) mksrc="$2"; shift;; -o|--objdir) objdir="$2"; shift;; -q) quiet=;; -c) source_rc "$2"; shift;; --*) CONFIGURE_ARGS="$CONFIGURE_ARGS $1";; *=*) eval "$1"; export `expr "x$1" : "x\\(.[^=]*\\)=.*"`;; *) break;; esac shift done AddConfigure() { case " $CONFIGURE_ARGS " in *" $1"*) ;; *) CONFIGURE_ARGS="$CONFIGURE_ARGS $1$2";; esac } GetDir() { match="$1" shift fmatch="$1" shift for dir in $* do [ -d "$dir" ] || continue case "/$dir/" in *$match*) ;; *) continue;; esac case "$fmatch" in .) ;; *) [ -s $dir/$fmatch ] || continue;; esac case "$dir/" in *./*) cd "$dir" && 'pwd';; /*) echo $dir;; *) cd "$dir" && 'pwd';; esac break done } FindHereOrAbove() { ( _t=-s while : do case "$1" in -C) cd "$2"; shift; shift;; -?) _t=$1; shift;; *) break;; esac done case "$1" in /*) # we shouldn't be here [ $_t "$1" ] && echo "$1" return ;; .../*) want=`echo "$1" | sed 's,^.../*,,'`;; *) want="$1";; esac here=`'pwd'` while : do if [ $_t "./$want" ]; then echo "$here/$want" return fi cd .. here=`'pwd'` case "$here" in /) return;; esac done ) } # is $1 missing from $2 (or PATH) ? no_path() { eval "__p=\$${2:-PATH}" case ":$__p:" in *:"$1":*) return 1;; *) return 0;; esac } # if $1 exists and is not in path, append it add_path () { case "$1" in -?) t=$1; shift;; *) t=-d;; esac case "$2,$1" in MAKESYSPATH,.../*) ;; *) [ $t ${1:-.} ] || return;; esac no_path $* && eval ${2:-PATH}="$__p${__p:+:}$1" } srcdir=`GetDir /bmake make-bootstrap.sh.in "$srcdir" "$2" "$Mydir" ./bmake* "$Mydir"/../bmake*` [ -d "${srcdir:-/dev/null}" ] || Usage case "$mksrc" in none|-) # we ignore this now mksrc=$Mydir/mk ;; .../*) # find here or above mksrc=`FindHereOrAbove -C "$Mydir" -s "$mksrc/sys.mk"` # that found a file mksrc=`dirname $mksrc` ;; *) # guess we want mksrc... mksrc=`GetDir /mk sys.mk "$mksrc" "$3" ./mk* "$srcdir"/mk* "$srcdir"/../mk*` [ -d "${mksrc:-/dev/null}" ] || Usage "Use '-m none' to build without mksrc" ;; esac # Ok, get to work... objdir="${objdir:-$OBJROOT$HOST_TARGET}" [ -d "$objdir" ] || mkdir -p "$objdir" [ -d "$objdir" ] || mkdir "$objdir" cd "$objdir" || exit 1 # make it absolute objdir=`'pwd'` ShareDir() { case "/$1" in /) [ -d /share ] || return;; */$HOST_TARGET) if [ -d "$1/../share" ]; then echo `dirname "$1"`/share return fi ;; esac echo $1/share } # make it easy to force prefix to use $HOST_TARGET : looking at "$prefix" case "$prefix" in */host?target) prefix=`echo "$prefix" | sed "s,host.target,${HOST_TARGET},"`;; esac share_dir="${share_dir:-`ShareDir $prefix`}" AddConfigure --prefix= "$prefix" case "$CONFIGURE_ARGS" in *--with-*-sys-path*) ;; # skip *) [ "$share_dir" ] && AddConfigure --with-default-sys-path= "$share_dir/mk";; esac if [ "$mksrc" ]; then AddConfigure --with-mksrc= "$mksrc" # not all cc's support this CFLAGS_MF= CFLAGS_MD= export CFLAGS_MF CFLAGS_MD fi # this makes it easy to run the bmake we just built # the :tA dance is needed because 'pwd' and even /bin/pwd # may not give the same result as realpath(). Bmake() { ( cd $Mydir && MAKESYSPATH=$mksrc SRCTOP=$Mydir OBJTOP=$objdir \ MAKEOBJDIR='${.CURDIR:S,${SRCTOP:tA},${OBJTOP:tA},}' \ ${BMAKE:-$objdir/bmake} -f $Mydir/Makefile "$@" ) } -# there is actually a shell where type is not a builtin -# if type is missing, which(1) had better exists! -if (type cat) > /dev/null 2>&1; then -which() { - type "$@" | sed 's,[()],,g;s,^[^/][^/]*,,;q' -} -fi -# make sure test below uses the same diff that configure did -TOOL_DIFF=`which diff` -export TOOL_DIFF - op_configure() { $srcdir/configure $CONFIGURE_ARGS || exit 1 } op_build() { [ -s make-bootstrap.sh ] || op_configure chmod 755 make-bootstrap.sh || exit 1 ./make-bootstrap.sh || exit 1 case "$op" in build) op_test;; esac } op_test() { [ -x bmake ] || op_build - Bmake test || exit 1 + Bmake test "$@" || exit 1 } op_clean() { if [ -x bmake ]; then ln bmake bmake$$ BMAKE=$objdir/bmake$$ Bmake clean rm -f bmake$$ elif [ $objdir != $srcdir ]; then rm -rf * fi } op_install() { op_test case "$INSTALL_PREFIX,$INSTALL_BIN,$prefix" in ,$HOST_TARGET/bin,*/$HOST_TARGET) INSTALL_PREFIX=`dirname $prefix` ;; esac INSTALL_PREFIX=${INSTALL_PREFIX:-$prefix} Bmake install prefix=$INSTALL_PREFIX BINDIR=$INSTALL_PREFIX/${INSTALL_BIN:-bin} ${INSTALL_DESTDIR:+DESTDIR=$INSTALL_DESTDIR} $INSTALL_ARGS || exit 1 } op_all() { rm -f make-bootstrap.sh bmake *.o if [ -n "$INSTALL_PREFIX" ]; then op_install else op_test MAKE_VERSION=`sed -n '/^_MAKE_VERSION/ { s,.*= *,,;p; }' $srcdir/Makefile` cat << EOM You can install by running: $0 $cmd_args op=install Use --install-prefix=/something to install somewhere other than $prefix Use --install-destdir=/somewhere to set DESTDIR during install Use --install-host-target to use INSTALL_BIN=$HOST_TARGET/bin Use -DWITH_PROG_VERSION to install as bmake-$MAKE_VERSION Use -DWITHOUT_PROG_LINK to suppress bmake -> bmake-$MAKE_VERSION symlink Use -DWITHOUT_INSTALL_MK to skip installing files to $prefix/share/mk EOM fi cat << EOM Note: bmake.cat1 contains ANSI escape sequences. You may need the -r or -R option to more/less to view it correctly. EOM } -op_$op +op_$op "$@" exit 0 diff --git a/contrib/bmake/bsd.after-import.mk b/contrib/bmake/bsd.after-import.mk index 0d48f3c26648..fec42c9deeed 100644 --- a/contrib/bmake/bsd.after-import.mk +++ b/contrib/bmake/bsd.after-import.mk @@ -1,126 +1,127 @@ -# $Id: bsd.after-import.mk,v 1.16 2020/07/12 03:39:01 sjg Exp $ +# $Id: bsd.after-import.mk,v 1.17 2021/10/22 06:31:32 sjg Exp $ # This makefile is for use when integrating bmake into a BSD build # system. Use this makefile after importing bmake. # It will bootstrap the new version, # capture the generated files we need, and add an after-import # target to allow the process to be easily repeated. # The goal is to allow the benefits of autoconf without # the overhead of running configure. all: _makefile _utmakefile all: after-import # we rely on bmake .if !defined(.PARSEDIR) .error this makefile requires bmake .endif _this := ${MAKEFILE:tA} BMAKE_SRC := ${.PARSEDIR} # it helps to know where the top of the tree is. .if !defined(SRCTOP) srctop := ${.MAKE.MAKEFILES:M*src/share/mk/sys.mk:H:H:H} .if empty(srctop) # likely locations? .for d in contrib/bmake external/bsd/bmake/dist .if ${BMAKE_SRC:M*/$d} != "" srctop := ${BMAKE_SRC:tA:S,/$d,,} .endif .endfor .endif .if !empty(srctop) SRCTOP := ${srctop} .endif .endif # This lets us match what boot-strap does .if defined(.MAKE.OS) HOST_OS:= ${.MAKE.OS} .elif !defined(HOST_OS) HOST_OS!= uname .endif BOOTSTRAP_ARGS = \ --prefix /usr \ --share /usr/share .if !empty(DEFAULT_SYS_PATH) BOOTSTRAP_ARGS += --with-default-sys-path='${DEFAULT_SYS_PATH}' .endif # run boot-strap with minimal influence bootstrap: ${BMAKE_SRC}/boot-strap ${MAKEFILE} HOME=/ ${BMAKE_SRC}/boot-strap -o ${HOST_OS} ${BOOTSTRAP_ARGS} ${BOOTSTRAP_XTRAS} touch ${.TARGET} # Makefiles need a little more tweaking than say config.h MAKEFILE_SED = sed -e '/^MACHINE/d' \ -e '/include.*VERSION/d' \ + -e '/^CC=/s,=,?=,' \ -e '/^PROG/ { s,=,?=,;s,bmake,$${.CURDIR:T},; }' \ -e 's,^.-include,.sinclude,' \ -e '/^\..*include * ${.CURDIR}/$f .endfor .for f in ${configured_files:M*Makefile*} @echo Capturing $f @mkdir -p ${${.CURDIR}/$f:L:H} @(echo '# This is a generated file, do NOT edit!'; \ echo '# See ${_this:S,${SRCTOP}/,,}'; \ echo '#'; echo '# $$${HOST_OS}$$'; echo; \ echo 'SRCTOP?= $${.CURDIR:${${.CURDIR}/$f:L:H:S,${SRCTOP}/,,:C,[^/]+,H,g:S,/,:,g}}'; echo; \ ${MAKEFILE_SED} ${HOST_OS}/$f ) > ${.CURDIR}/$f .endfor # this needs the most work _makefile: bootstrap ${MAKEFILE} @echo Generating ${.CURDIR}/Makefile @(echo '# This is a generated file, do NOT edit!'; \ echo '# See ${_this:S,${SRCTOP}/,,}'; \ echo '#'; echo '# $$${HOST_OS}$$'; \ echo; echo 'SRCTOP?= $${.CURDIR:${.CURDIR:S,${SRCTOP}/,,:C,[^/]+,H,g:S,/,:,g}}'; \ echo; echo '# look here first for config.h'; \ echo 'CFLAGS+= -I$${.CURDIR}'; echo; \ echo '# for after-import'; \ echo 'CLEANDIRS+= ${HOST_OS}'; \ echo 'CLEANFILES+= bootstrap'; echo; \ ${MAKEFILE_SED} \ ${1 2:L:@n@-e '/start-delete$n/,/end-delete$n/d'@} \ ${BMAKE_SRC}/Makefile; \ echo; echo '# override some simple things'; \ echo 'BINDIR= /usr/bin'; \ echo 'MANDIR= ${MANDIR:U/usr/share/man}'; \ echo; echo '# make sure we get this'; \ echo 'CFLAGS+= $${COPTS.$${.IMPSRC:T}}'; \ echo; echo 'after-import: ${_this:S,${SRCTOP},\${SRCTOP},}'; \ echo ' cd $${.CURDIR} && $${.MAKE} -f ${_this:S,${SRCTOP},\${SRCTOP},}'; \ echo ) > ${.TARGET} @cmp -s ${.TARGET} ${.CURDIR}/Makefile || \ mv ${.TARGET} ${.CURDIR}/Makefile _utmakefile: bootstrap ${MAKEFILE} @echo Generating ${.CURDIR}/unit-tests/Makefile @mkdir -p ${.CURDIR}/unit-tests @(echo '# This is a generated file, do NOT edit!'; \ echo '# See ${_this:S,${SRCTOP}/,,}'; \ echo '#'; echo '# $$${HOST_OS}$$'; \ ${MAKEFILE_SED} \ -e '/^UNIT_TESTS/s,=.*,= $${srcdir},' \ ${BMAKE_SRC}/unit-tests/Makefile ) > ${.TARGET} @cmp -s ${.TARGET} ${.CURDIR}/unit-tests/Makefile || \ mv ${.TARGET} ${.CURDIR}/unit-tests/Makefile .include diff --git a/contrib/bmake/buf.c b/contrib/bmake/buf.c index cef082247278..8c26cfa24955 100644 --- a/contrib/bmake/buf.c +++ b/contrib/bmake/buf.c @@ -1,220 +1,223 @@ -/* $NetBSD: buf.c,v 1.51 2021/01/30 21:18:14 rillig Exp $ */ +/* $NetBSD: buf.c,v 1.53 2021/11/28 22:48:06 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* Automatically-expanding null-terminated character buffers. */ #include #include "make.h" /* "@(#)buf.c 8.1 (Berkeley) 6/6/93" */ -MAKE_RCSID("$NetBSD: buf.c,v 1.51 2021/01/30 21:18:14 rillig Exp $"); +MAKE_RCSID("$NetBSD: buf.c,v 1.53 2021/11/28 22:48:06 rillig Exp $"); /* Make space in the buffer for adding at least 16 more bytes. */ void Buf_Expand(Buffer *buf) { buf->cap += buf->cap > 16 ? buf->cap : 16; buf->data = bmake_realloc(buf->data, buf->cap); } /* Add the bytes to the buffer. */ void Buf_AddBytes(Buffer *buf, const char *bytes, size_t bytes_len) { size_t old_len = buf->len; char *end; if (old_len + bytes_len >= buf->cap) { size_t minIncr = bytes_len + 16; buf->cap += buf->cap > minIncr ? buf->cap : minIncr; buf->data = bmake_realloc(buf->data, buf->cap); } end = buf->data + old_len; buf->len = old_len + bytes_len; memcpy(end, bytes, bytes_len); end[bytes_len] = '\0'; } /* Add the bytes between start and end to the buffer. */ void Buf_AddBytesBetween(Buffer *buf, const char *start, const char *end) { Buf_AddBytes(buf, start, (size_t)(end - start)); } /* Add the string to the buffer. */ void Buf_AddStr(Buffer *buf, const char *str) { Buf_AddBytes(buf, str, strlen(str)); } /* Add the number to the buffer. */ void Buf_AddInt(Buffer *buf, int n) { - enum { - bits = sizeof(int) * CHAR_BIT, - max_octal_digits = (bits + 2) / 3, - max_decimal_digits = /* at most */ max_octal_digits, - max_sign_chars = 1, - str_size = max_sign_chars + max_decimal_digits + 1 - }; - char str[str_size]; + char str[sizeof(int) * CHAR_BIT + 1]; size_t len = (size_t)snprintf(str, sizeof str, "%d", n); Buf_AddBytes(buf, str, len); } +void +Buf_AddFlag(Buffer *buf, bool flag, const char *name) +{ + if (flag) { + if (buf->len > 0) + Buf_AddByte(buf, '|'); + Buf_AddBytes(buf, name, strlen(name)); + } +} + /* Mark the buffer as empty, so it can be filled with data again. */ void Buf_Empty(Buffer *buf) { buf->len = 0; buf->data[0] = '\0'; } /* Initialize a buffer. */ void Buf_InitSize(Buffer *buf, size_t cap) { buf->cap = cap; buf->len = 0; buf->data = bmake_malloc(cap); buf->data[0] = '\0'; } void Buf_Init(Buffer *buf) { Buf_InitSize(buf, 256); } /* * Free the data from the buffer. * Leave the buffer itself in an indeterminate state. */ void Buf_Done(Buffer *buf) { free(buf->data); #ifdef CLEANUP buf->cap = 0; buf->len = 0; buf->data = NULL; #endif } /* * Return the data from the buffer. * Leave the buffer itself in an indeterminate state. */ char * Buf_DoneData(Buffer *buf) { char *data = buf->data; #ifdef CLEANUP buf->cap = 0; buf->len = 0; buf->data = NULL; #endif return data; } #ifndef BUF_COMPACT_LIMIT # define BUF_COMPACT_LIMIT 128 /* worthwhile saving */ #endif /* * Return the data from the buffer. * Leave the buffer itself in an indeterminate state. * * If the buffer size is much greater than its content, * a new buffer will be allocated and the old one freed. */ char * Buf_DoneDataCompact(Buffer *buf) { #if BUF_COMPACT_LIMIT > 0 if (buf->cap - buf->len >= BUF_COMPACT_LIMIT) { /* We trust realloc to be smart */ char *data = bmake_realloc(buf->data, buf->len + 1); data[buf->len] = '\0'; /* XXX: unnecessary */ Buf_DoneData(buf); return data; } #endif return Buf_DoneData(buf); } diff --git a/contrib/bmake/buf.h b/contrib/bmake/buf.h index 938820e4745f..af36773405b0 100644 --- a/contrib/bmake/buf.h +++ b/contrib/bmake/buf.h @@ -1,121 +1,122 @@ -/* $NetBSD: buf.h,v 1.43 2021/04/03 11:08:40 rillig Exp $ */ +/* $NetBSD: buf.h,v 1.44 2021/11/28 22:48:06 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)buf.h 8.1 (Berkeley) 6/6/93 */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)buf.h 8.1 (Berkeley) 6/6/93 */ /* Automatically growing null-terminated buffers of characters. */ #ifndef MAKE_BUF_H #define MAKE_BUF_H #include /* An automatically growing null-terminated buffer of characters. */ typedef struct Buffer { size_t cap; /* Allocated size of the buffer, including the '\0' */ size_t len; /* Number of bytes in buffer, excluding the '\0' */ char *data; /* The buffer itself (always null-terminated) */ } Buffer; void Buf_Expand(Buffer *); /* Buf_AddByte adds a single byte to a buffer. */ MAKE_INLINE void Buf_AddByte(Buffer *buf, char byte) { size_t old_len = buf->len++; char *end; if (old_len + 1 >= buf->cap) Buf_Expand(buf); end = buf->data + old_len; end[0] = byte; end[1] = '\0'; } MAKE_INLINE bool Buf_EndsWith(const Buffer *buf, char ch) { return buf->len > 0 && buf->data[buf->len - 1] == ch; } void Buf_AddBytes(Buffer *, const char *, size_t); void Buf_AddBytesBetween(Buffer *, const char *, const char *); void Buf_AddStr(Buffer *, const char *); void Buf_AddInt(Buffer *, int); +void Buf_AddFlag(Buffer *, bool, const char *); void Buf_Empty(Buffer *); void Buf_Init(Buffer *); void Buf_InitSize(Buffer *, size_t); void Buf_Done(Buffer *); char *Buf_DoneData(Buffer *); char *Buf_DoneDataCompact(Buffer *); #endif /* MAKE_BUF_H */ diff --git a/contrib/bmake/compat.c b/contrib/bmake/compat.c index f8c47397f3df..df487dbdf254 100644 --- a/contrib/bmake/compat.c +++ b/contrib/bmake/compat.c @@ -1,762 +1,762 @@ -/* $NetBSD: compat.c,v 1.227 2021/04/27 15:19:25 christos Exp $ */ +/* $NetBSD: compat.c,v 1.229 2021/11/28 23:12:51 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * compat.c -- * The routines in this file implement the full-compatibility * mode of PMake. Most of the special functionality of PMake * is available in this mode. Things not supported: * - different shells. * - friendly variable substitution. * * Interface: * Compat_Run Initialize things for this module and recreate * thems as need creatin' */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include #include "wait.h" #include #include #include "make.h" #include "dir.h" #include "job.h" #include "metachar.h" #include "pathnames.h" /* "@(#)compat.c 8.2 (Berkeley) 3/19/94" */ -MAKE_RCSID("$NetBSD: compat.c,v 1.227 2021/04/27 15:19:25 christos Exp $"); +MAKE_RCSID("$NetBSD: compat.c,v 1.229 2021/11/28 23:12:51 rillig Exp $"); static GNode *curTarg = NULL; static pid_t compatChild; static int compatSigno; /* * CompatDeleteTarget -- delete the file of a failed, interrupted, or * otherwise duffed target if not inhibited by .PRECIOUS. */ static void CompatDeleteTarget(GNode *gn) { if (gn != NULL && !Targ_Precious(gn)) { const char *file = GNode_VarTarget(gn); if (!opts.noExecute && eunlink(file) != -1) { Error("*** %s removed", file); } } } /* * Interrupt the creation of the current target and remove it if it ain't * precious. Then exit. * * If .INTERRUPT exists, its commands are run first WITH INTERRUPTS IGNORED. * * XXX: is .PRECIOUS supposed to inhibit .INTERRUPT? I doubt it, but I've * left the logic alone for now. - dholland 20160826 */ static void CompatInterrupt(int signo) { CompatDeleteTarget(curTarg); if (curTarg != NULL && !Targ_Precious(curTarg)) { /* * Run .INTERRUPT only if hit with interrupt signal */ if (signo == SIGINT) { GNode *gn = Targ_FindNode(".INTERRUPT"); if (gn != NULL) { Compat_Make(gn, gn); } } } if (signo == SIGQUIT) _exit(signo); /* * If there is a child running, pass the signal on. * We will exist after it has exited. */ compatSigno = signo; if (compatChild > 0) { KILLPG(compatChild, signo); } else { bmake_signal(signo, SIG_DFL); kill(myPid, signo); } } static void DebugFailedTarget(const char *cmd, const GNode *gn) { const char *p = cmd; debug_printf("\n*** Failed target: %s\n*** Failed command: ", gn->name); /* Replace runs of whitespace with a single space, to reduce * the amount of whitespace for multi-line command lines. */ while (*p != '\0') { if (ch_isspace(*p)) { debug_printf(" "); cpp_skip_whitespace(&p); } else { debug_printf("%c", *p); p++; } } debug_printf("\n"); } static bool UseShell(const char *cmd MAKE_ATTR_UNUSED) { -#if !defined(MAKE_NATIVE) +#if defined(FORCE_USE_SHELL) || !defined(MAKE_NATIVE) /* * In a non-native build, the host environment might be weird enough * that it's necessary to go through a shell to get the correct * behaviour. Or perhaps the shell has been replaced with something * that does extra logging, and that should not be bypassed. */ return true; #else /* * Search for meta characters in the command. If there are no meta * characters, there's no need to execute a shell to execute the * command. * * Additionally variable assignments and empty commands * go to the shell. Therefore treat '=' and ':' like shell * meta characters as documented in make(1). */ return needshell(cmd); #endif } /* * Execute the next command for a target. If the command returns an error, * the node's made field is set to ERROR and creation stops. * * Input: * cmdp Command to execute * gn Node from which the command came * ln List node that contains the command * * Results: * 0 if the command succeeded, 1 if an error occurred. */ int Compat_RunCommand(const char *cmdp, GNode *gn, StringListNode *ln) { char *cmdStart; /* Start of expanded command */ char *bp; bool silent; /* Don't print command */ bool doIt; /* Execute even if -n */ volatile bool errCheck; /* Check errors */ WAIT_T reason; /* Reason for child's death */ WAIT_T status; /* Description of child's death */ pid_t cpid; /* Child actually found */ pid_t retstat; /* Result of wait */ const char **volatile av; /* Argument vector for thing to exec */ char **volatile mav; /* Copy of the argument vector for freeing */ bool useShell; /* True if command should be executed * using a shell */ const char *volatile cmd = cmdp; - silent = (gn->type & OP_SILENT) != 0; + silent = (gn->type & OP_SILENT) != OP_NONE; errCheck = !(gn->type & OP_IGNORE); doIt = false; (void)Var_Subst(cmd, gn, VARE_WANTRES, &cmdStart); /* TODO: handle errors */ if (cmdStart[0] == '\0') { free(cmdStart); return 0; } cmd = cmdStart; LstNode_Set(ln, cmdStart); if (gn->type & OP_SAVE_CMDS) { GNode *endNode = Targ_GetEndNode(); if (gn != endNode) { /* * Append the expanded command, to prevent the * local variables from being interpreted in the * scope of the .END node. * * A probably unintended side effect of this is that * the expanded command will be expanded again in the * .END node. Therefore, a literal '$' in these * commands must be written as '$$$$' instead of the * usual '$$'. */ Lst_Append(&endNode->commands, cmdStart); return 0; } } if (strcmp(cmdStart, "...") == 0) { gn->type |= OP_SAVE_CMDS; return 0; } for (;;) { if (*cmd == '@') silent = !DEBUG(LOUD); else if (*cmd == '-') errCheck = false; else if (*cmd == '+') { doIt = true; if (shellName == NULL) /* we came here from jobs */ Shell_Init(); } else break; cmd++; } while (ch_isspace(*cmd)) cmd++; /* * If we did not end up with a command, just skip it. */ if (cmd[0] == '\0') return 0; useShell = UseShell(cmd); /* * Print the command before echoing if we're not supposed to be quiet * for this one. We also print the command if -n given. */ if (!silent || !GNode_ShouldExecute(gn)) { printf("%s\n", cmd); fflush(stdout); } /* * If we're not supposed to execute any commands, this is as far as * we go... */ if (!doIt && !GNode_ShouldExecute(gn)) return 0; DEBUG1(JOB, "Execute: '%s'\n", cmd); if (useShell) { /* * We need to pass the command off to the shell, typically * because the command contains a "meta" character. */ static const char *shargv[5]; /* The following work for any of the builtin shell specs. */ int shargc = 0; shargv[shargc++] = shellPath; if (errCheck && shellErrFlag != NULL) shargv[shargc++] = shellErrFlag; shargv[shargc++] = DEBUG(SHELL) ? "-xc" : "-c"; shargv[shargc++] = cmd; shargv[shargc] = NULL; av = shargv; bp = NULL; mav = NULL; } else { /* * No meta-characters, so no need to exec a shell. Break the * command into words to form an argument vector we can * execute. */ Words words = Str_Words(cmd, false); mav = words.words; bp = words.freeIt; av = (void *)mav; } #ifdef USE_META if (useMeta) { meta_compat_start(); } #endif Var_ReexportVars(); /* * Fork and execute the single command. If the fork fails, we abort. */ compatChild = cpid = vfork(); if (cpid < 0) { Fatal("Could not fork"); } if (cpid == 0) { #ifdef USE_META if (useMeta) { meta_compat_child(); } #endif (void)execvp(av[0], (char *const *)UNCONST(av)); execDie("exec", av[0]); } free(mav); free(bp); /* XXX: Memory management looks suspicious here. */ /* XXX: Setting a list item to NULL is unexpected. */ LstNode_SetNull(ln); #ifdef USE_META if (useMeta) { meta_compat_parent(cpid); } #endif /* * The child is off and running. Now all we can do is wait... */ while ((retstat = wait(&reason)) != cpid) { if (retstat > 0) JobReapChild(retstat, reason, false); /* not ours? */ if (retstat == -1 && errno != EINTR) { break; } } if (retstat < 0) Fatal("error in wait: %d: %s", retstat, strerror(errno)); if (WIFSTOPPED(reason)) { status = WSTOPSIG(reason); /* stopped */ } else if (WIFEXITED(reason)) { status = WEXITSTATUS(reason); /* exited */ #if defined(USE_META) && defined(USE_FILEMON_ONCE) if (useMeta) { meta_cmd_finish(NULL); } #endif if (status != 0) { if (DEBUG(ERROR)) DebugFailedTarget(cmd, gn); printf("*** Error code %d", status); } } else { status = WTERMSIG(reason); /* signaled */ printf("*** Signal %d", status); } if (!WIFEXITED(reason) || status != 0) { if (errCheck) { #ifdef USE_META if (useMeta) { meta_job_error(NULL, gn, false, status); } #endif gn->made = ERROR; if (opts.keepgoing) { /* * Abort the current target, * but let others continue. */ printf(" (continuing)\n"); } else { printf("\n"); } if (deleteOnError) CompatDeleteTarget(gn); } else { /* * Continue executing commands for this target. * If we return 0, this will happen... */ printf(" (ignored)\n"); status = 0; } } free(cmdStart); compatChild = 0; if (compatSigno != 0) { bmake_signal(compatSigno, SIG_DFL); kill(myPid, compatSigno); } return status; } static void RunCommands(GNode *gn) { StringListNode *ln; for (ln = gn->commands.first; ln != NULL; ln = ln->next) { const char *cmd = ln->datum; if (Compat_RunCommand(cmd, gn, ln) != 0) break; } } static void MakeNodes(GNodeList *gnodes, GNode *pgn) { GNodeListNode *ln; for (ln = gnodes->first; ln != NULL; ln = ln->next) { GNode *cohort = ln->datum; Compat_Make(cohort, pgn); } } static bool MakeUnmade(GNode *gn, GNode *pgn) { assert(gn->made == UNMADE); /* * First mark ourselves to be made, then apply whatever transformations * the suffix module thinks are necessary. Once that's done, we can * descend and make all our children. If any of them has an error * but the -k flag was given, our 'make' field will be set to false * again. This is our signal to not attempt to do anything but abort * our parent as well. */ - gn->flags |= REMAKE; + gn->flags.remake = true; gn->made = BEINGMADE; if (!(gn->type & OP_MADE)) Suff_FindDeps(gn); MakeNodes(&gn->children, gn); - if (!(gn->flags & REMAKE)) { + if (!gn->flags.remake) { gn->made = ABORTED; - pgn->flags &= ~(unsigned)REMAKE; + pgn->flags.remake = false; return false; } if (Lst_FindDatum(&gn->implicitParents, pgn) != NULL) Var_Set(pgn, IMPSRC, GNode_VarTarget(gn)); /* * All the children were made ok. Now youngestChild->mtime contains the * modification time of the newest child, we need to find out if we * exist and when we were modified last. The criteria for datedness * are defined by GNode_IsOODate. */ DEBUG1(MAKE, "Examining %s...", gn->name); if (!GNode_IsOODate(gn)) { gn->made = UPTODATE; DEBUG0(MAKE, "up-to-date.\n"); return false; } /* * If the user is just seeing if something is out-of-date, exit now * to tell him/her "yes". */ DEBUG0(MAKE, "out-of-date.\n"); if (opts.queryFlag) exit(1); /* * We need to be re-made. * Ensure that $? (.OODATE) and $> (.ALLSRC) are both set. */ GNode_SetLocalVars(gn); /* * Alter our type to tell if errors should be ignored or things * should not be printed so Compat_RunCommand knows what to do. */ if (opts.ignoreErrors) gn->type |= OP_IGNORE; if (opts.beSilent) gn->type |= OP_SILENT; if (Job_CheckCommands(gn, Fatal)) { /* * Our commands are ok, but we still have to worry about * the -t flag. */ if (!opts.touchFlag || (gn->type & OP_MAKE)) { curTarg = gn; #ifdef USE_META if (useMeta && GNode_ShouldExecute(gn)) { meta_job_start(NULL, gn); } #endif RunCommands(gn); curTarg = NULL; } else { - Job_Touch(gn, (gn->type & OP_SILENT) != 0); + Job_Touch(gn, (gn->type & OP_SILENT) != OP_NONE); } } else { gn->made = ERROR; } #ifdef USE_META if (useMeta && GNode_ShouldExecute(gn)) { if (meta_job_finish(NULL) != 0) gn->made = ERROR; } #endif if (gn->made != ERROR) { /* * If the node was made successfully, mark it so, update * its modification time and timestamp all its parents. * This is to keep its state from affecting that of its parent. */ gn->made = MADE; if (Make_Recheck(gn) == 0) - pgn->flags |= FORCE; + pgn->flags.force = true; if (!(gn->type & OP_EXEC)) { - pgn->flags |= CHILDMADE; + pgn->flags.childMade = true; GNode_UpdateYoungestChild(pgn, gn); } } else if (opts.keepgoing) { - pgn->flags &= ~(unsigned)REMAKE; + pgn->flags.remake = false; } else { PrintOnError(gn, "\nStop."); exit(1); } return true; } static void MakeOther(GNode *gn, GNode *pgn) { if (Lst_FindDatum(&gn->implicitParents, pgn) != NULL) { const char *target = GNode_VarTarget(gn); Var_Set(pgn, IMPSRC, target != NULL ? target : ""); } switch (gn->made) { case BEINGMADE: Error("Graph cycles through %s", gn->name); gn->made = ERROR; - pgn->flags &= ~(unsigned)REMAKE; + pgn->flags.remake = false; break; case MADE: if (!(gn->type & OP_EXEC)) { - pgn->flags |= CHILDMADE; + pgn->flags.childMade = true; GNode_UpdateYoungestChild(pgn, gn); } break; case UPTODATE: if (!(gn->type & OP_EXEC)) GNode_UpdateYoungestChild(pgn, gn); break; default: break; } } /* * Make a target. * * If an error is detected and not being ignored, the process exits. * * Input: * gn The node to make * pgn Parent to abort if necessary * * Output: * gn->made * UPTODATE gn was already up-to-date. * MADE gn was recreated successfully. * ERROR An error occurred while gn was being created, * either due to missing commands or in -k mode. * ABORTED gn was not remade because one of its * dependencies could not be made due to errors. */ void Compat_Make(GNode *gn, GNode *pgn) { if (shellName == NULL) /* we came here from jobs */ Shell_Init(); if (gn->made == UNMADE && (gn == pgn || !(pgn->type & OP_MADE))) { if (!MakeUnmade(gn, pgn)) goto cohorts; /* XXX: Replace with GNode_IsError(gn) */ } else if (gn->made == ERROR) { /* * Already had an error when making this. * Tell the parent to abort. */ - pgn->flags &= ~(unsigned)REMAKE; + pgn->flags.remake = false; } else { MakeOther(gn, pgn); } cohorts: MakeNodes(&gn->cohorts, pgn); } static void MakeBeginNode(void) { GNode *gn = Targ_FindNode(".BEGIN"); if (gn == NULL) return; Compat_Make(gn, gn); if (GNode_IsError(gn)) { PrintOnError(gn, "\nStop."); exit(1); } } static void InitSignals(void) { if (bmake_signal(SIGINT, SIG_IGN) != SIG_IGN) bmake_signal(SIGINT, CompatInterrupt); if (bmake_signal(SIGTERM, SIG_IGN) != SIG_IGN) bmake_signal(SIGTERM, CompatInterrupt); if (bmake_signal(SIGHUP, SIG_IGN) != SIG_IGN) bmake_signal(SIGHUP, CompatInterrupt); if (bmake_signal(SIGQUIT, SIG_IGN) != SIG_IGN) bmake_signal(SIGQUIT, CompatInterrupt); } /* * Initialize this module and start making. * * Input: * targs The target nodes to re-create */ void Compat_Run(GNodeList *targs) { GNode *errorNode = NULL; if (shellName == NULL) Shell_Init(); InitSignals(); /* Create the .END node now, to keep the (debug) output of the * counter.mk test the same as before 2020-09-23. This implementation * detail probably doesn't matter though. */ (void)Targ_GetEndNode(); if (!opts.queryFlag) MakeBeginNode(); /* * Expand .USE nodes right now, because they can modify the structure * of the tree. */ Make_ExpandUse(targs); while (!Lst_IsEmpty(targs)) { GNode *gn = Lst_Dequeue(targs); Compat_Make(gn, gn); if (gn->made == UPTODATE) { printf("`%s' is up to date.\n", gn->name); } else if (gn->made == ABORTED) { printf("`%s' not remade because of errors.\n", gn->name); } if (GNode_IsError(gn) && errorNode == NULL) errorNode = gn; } /* If the user has defined a .END target, run its commands. */ if (errorNode == NULL) { GNode *endNode = Targ_GetEndNode(); Compat_Make(endNode, endNode); if (GNode_IsError(endNode)) errorNode = endNode; } if (errorNode != NULL) { if (DEBUG(GRAPH2)) Targ_PrintGraph(2); else if (DEBUG(GRAPH3)) Targ_PrintGraph(3); PrintOnError(errorNode, "\nStop."); exit(1); } } diff --git a/contrib/bmake/cond.c b/contrib/bmake/cond.c index a8d88d1d6816..96609682866b 100644 --- a/contrib/bmake/cond.c +++ b/contrib/bmake/cond.c @@ -1,1368 +1,1332 @@ -/* $NetBSD: cond.c,v 1.267 2021/06/11 14:52:03 rillig Exp $ */ +/* $NetBSD: cond.c,v 1.302 2021/12/12 09:36:00 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Handling of conditionals in a makefile. * * Interface: * Cond_EvalLine Evaluate the conditional directive, such as * '.if ', '.elifnmake ', '.else', '.endif'. * * Cond_EvalCondition * Evaluate the conditional, which is either the argument * of one of the .if directives or the condition in a * ':?then:else' variable modifier. * * Cond_save_depth * Cond_restore_depth * Save and restore the nesting of the conditions, at * the start and end of including another makefile, to * ensure that in each makefile the conditional * directives are well-balanced. */ #include #include "make.h" #include "dir.h" /* "@(#)cond.c 8.2 (Berkeley) 1/2/94" */ -MAKE_RCSID("$NetBSD: cond.c,v 1.267 2021/06/11 14:52:03 rillig Exp $"); +MAKE_RCSID("$NetBSD: cond.c,v 1.302 2021/12/12 09:36:00 rillig Exp $"); /* * The parsing of conditional expressions is based on this grammar: - * Or -> And '||' Or - * Or -> And - * And -> Term '&&' And - * And -> Term + * Or -> And ('||' And)* + * And -> Term ('&&' Term)* * Term -> Function '(' Argument ')' * Term -> Leaf Operator Leaf * Term -> Leaf * Term -> '(' Or ')' * Term -> '!' Term * Leaf -> "string" * Leaf -> Number * Leaf -> VariableExpression * Leaf -> Symbol * Operator -> '==' | '!=' | '>' | '<' | '>=' | '<=' * * 'Symbol' is an unquoted string literal to which the default function is * applied. * * The tokens are scanned by CondToken, which returns: * TOK_AND for '&&' * TOK_OR for '||' * TOK_NOT for '!' * TOK_LPAREN for '(' * TOK_RPAREN for ')' * * Other terminal symbols are evaluated using either the default function or * the function given in the terminal, they return either TOK_TRUE or * TOK_FALSE. */ typedef enum Token { TOK_FALSE, TOK_TRUE, TOK_AND, TOK_OR, TOK_NOT, TOK_LPAREN, TOK_RPAREN, TOK_EOF, TOK_NONE, TOK_ERROR } Token; typedef enum CondResult { CR_FALSE, CR_TRUE, CR_ERROR } CondResult; typedef enum ComparisonOp { LT, LE, GT, GE, EQ, NE } ComparisonOp; typedef struct CondParser { /* * The plain '.if ${VAR}' evaluates to true if the value of the * expression has length > 0. The other '.if' variants delegate * to evalBare instead. */ bool plain; /* The function to apply on unquoted bare words. */ - bool (*evalBare)(size_t, const char *); + bool (*evalBare)(const char *); bool negateEvalBare; + /* + * Whether the left-hand side of a comparison may be an unquoted + * string. This is allowed for expressions of the form + * ${condition:?:}, see ApplyModifier_IfElse. Such a condition is + * expanded before it is evaluated, due to ease of implementation. + * This means that at the point where the condition is evaluated, + * make cannot know anymore whether the left-hand side had originally + * been a variable expression or a plain word. + * + * In all other contexts, the left-hand side must either be a + * variable expression, a quoted string or a number. + */ + bool leftUnquotedOK; + const char *p; /* The remaining condition to parse */ Token curr; /* Single push-back token used in parsing */ /* * Whether an error message has already been printed for this * condition. The first available error message is usually the most * specific one, therefore it makes sense to suppress the standard * "Malformed conditional" message. */ bool printedError; } CondParser; static CondResult CondParser_Or(CondParser *par, bool); static unsigned int cond_depth = 0; /* current .if nesting level */ static unsigned int cond_min_depth = 0; /* depth at makefile open */ -static const char *opname[] = { "<", "<=", ">", ">=", "==", "!=" }; - -/* - * Indicate when we should be strict about lhs of comparisons. - * In strict mode, the lhs must be a variable expression or a string literal - * in quotes. In non-strict mode it may also be an unquoted string literal. - * - * True when CondEvalExpression is called from Cond_EvalLine (.if etc). - * False when CondEvalExpression is called from ApplyModifier_IfElse - * since lhs is already expanded, and at that point we cannot tell if - * it was a variable reference or not. - */ -static bool lhsStrict; +/* Names for ComparisonOp. */ +static const char opname[][3] = { "<", "<=", ">", ">=", "==", "!=" }; static bool -is_token(const char *str, const char *tok, size_t len) +is_token(const char *str, const char *tok, unsigned char len) { - return strncmp(str, tok, len) == 0 && !ch_isalpha(str[len]); + return strncmp(str, tok, (size_t)len) == 0 && !ch_isalpha(str[len]); } static Token ToToken(bool cond) { return cond ? TOK_TRUE : TOK_FALSE; } -/* Push back the most recent token read. We only need one level of this. */ -static void -CondParser_PushBack(CondParser *par, Token t) -{ - assert(par->curr == TOK_NONE); - assert(t != TOK_NONE); - - par->curr = t; -} - static void CondParser_SkipWhitespace(CondParser *par) { cpp_skip_whitespace(&par->p); } /* - * Parse the argument of a built-in function. + * Parse a single word, taking into account balanced parentheses as well as + * embedded expressions. Used for the argument of a built-in function as + * well as for bare words, which are then passed to the default function. * * Arguments: * *pp initially points at the '(', * upon successful return it points right after the ')'. * * *out_arg receives the argument as string. * * func says whether the argument belongs to an actual function, or - * whether the parsed argument is passed to the default function. + * NULL when parsing a bare word. * - * Return the length of the argument, or 0 on error. + * Return the length of the argument, or an ambiguous 0 on error. */ static size_t -ParseFuncArg(CondParser *par, const char **pp, bool doEval, const char *func, +ParseWord(CondParser *par, const char **pp, bool doEval, const char *func, char **out_arg) { const char *p = *pp; Buffer argBuf; int paren_depth; size_t argLen; if (func != NULL) p++; /* Skip opening '(' - verified by caller */ - if (*p == '\0') { - *out_arg = NULL; /* Missing closing parenthesis: */ - return 0; /* .if defined( */ - } - cpp_skip_hspace(&p); Buf_InitSize(&argBuf, 16); paren_depth = 0; for (;;) { char ch = *p; if (ch == '\0' || ch == ' ' || ch == '\t') break; if ((ch == '&' || ch == '|') && paren_depth == 0) break; if (*p == '$') { /* * Parse the variable expression and install it as * part of the argument if it's valid. We tell * Var_Parse to complain on an undefined variable, * (XXX: but Var_Parse ignores that request) * so we don't need to do it. Nor do we return an * error, though perhaps we should. */ VarEvalMode emode = doEval ? VARE_UNDEFERR : VARE_PARSE_ONLY; FStr nestedVal; (void)Var_Parse(&p, SCOPE_CMDLINE, emode, &nestedVal); /* TODO: handle errors */ Buf_AddStr(&argBuf, nestedVal.str); FStr_Done(&nestedVal); continue; } if (ch == '(') paren_depth++; else if (ch == ')' && --paren_depth < 0) break; Buf_AddByte(&argBuf, *p); p++; } argLen = argBuf.len; *out_arg = Buf_DoneData(&argBuf); cpp_skip_hspace(&p); if (func != NULL && *p++ != ')') { Parse_Error(PARSE_FATAL, "Missing closing parenthesis for %s()", func); par->printedError = true; return 0; } *pp = p; return argLen; } /* Test whether the given variable is defined. */ -/*ARGSUSED*/ static bool -FuncDefined(size_t argLen MAKE_ATTR_UNUSED, const char *arg) +FuncDefined(const char *arg) { FStr value = Var_Value(SCOPE_CMDLINE, arg); bool result = value.str != NULL; FStr_Done(&value); return result; } -/* See if the given target is being made. */ -/*ARGSUSED*/ +/* See if the given target is requested to be made. */ static bool -FuncMake(size_t argLen MAKE_ATTR_UNUSED, const char *arg) +FuncMake(const char *arg) { StringListNode *ln; for (ln = opts.create.first; ln != NULL; ln = ln->next) if (Str_Match(ln->datum, arg)) return true; return false; } /* See if the given file exists. */ -/*ARGSUSED*/ static bool -FuncExists(size_t argLen MAKE_ATTR_UNUSED, const char *arg) +FuncExists(const char *arg) { bool result; char *path; path = Dir_FindFile(arg, &dirSearchPath); DEBUG2(COND, "exists(%s) result is \"%s\"\n", arg, path != NULL ? path : ""); result = path != NULL; free(path); return result; } /* See if the given node exists and is an actual target. */ -/*ARGSUSED*/ static bool -FuncTarget(size_t argLen MAKE_ATTR_UNUSED, const char *arg) +FuncTarget(const char *arg) { GNode *gn = Targ_FindNode(arg); return gn != NULL && GNode_IsTarget(gn); } /* * See if the given node exists and is an actual target with commands * associated with it. */ -/*ARGSUSED*/ static bool -FuncCommands(size_t argLen MAKE_ATTR_UNUSED, const char *arg) +FuncCommands(const char *arg) { GNode *gn = Targ_FindNode(arg); return gn != NULL && GNode_IsTarget(gn) && !Lst_IsEmpty(&gn->commands); } /* * Convert the given number into a double. * We try a base 10 or 16 integer conversion first, if that fails * then we try a floating point conversion instead. * * Results: * Returns true if the conversion succeeded. * Sets 'out_value' to the converted number. */ static bool TryParseNumber(const char *str, double *out_value) { char *end; unsigned long ul_val; double dbl_val; - errno = 0; if (str[0] == '\0') { /* XXX: why is an empty string a number? */ *out_value = 0.0; return true; } + errno = 0; ul_val = strtoul(str, &end, str[1] == 'x' ? 16 : 10); if (*end == '\0' && errno != ERANGE) { *out_value = str[0] == '-' ? -(double)-ul_val : (double)ul_val; return true; } if (*end != '\0' && *end != '.' && *end != 'e' && *end != 'E') return false; /* skip the expensive strtod call */ dbl_val = strtod(str, &end); if (*end != '\0') return false; *out_value = dbl_val; return true; } static bool is_separator(char ch) { return ch == '\0' || ch_isspace(ch) || ch == '!' || ch == '=' || ch == '>' || ch == '<' || ch == ')' /* but not '(' */; } /* * In a quoted or unquoted string literal or a number, parse a variable * expression. * * Example: .if x${CENTER}y == "${PREFIX}${SUFFIX}" || 0x${HEX} */ static bool CondParser_StringExpr(CondParser *par, const char *start, - bool const doEval, bool const quoted, - Buffer *buf, FStr *const inout_str) + bool doEval, bool quoted, + Buffer *buf, FStr *inout_str) { VarEvalMode emode; const char *nested_p; bool atStart; VarParseResult parseResult; - /* if we are in quotes, an undefined variable is ok */ - emode = doEval && !quoted ? VARE_UNDEFERR - : doEval ? VARE_WANTRES + emode = doEval && quoted ? VARE_WANTRES + : doEval ? VARE_UNDEFERR : VARE_PARSE_ONLY; nested_p = par->p; atStart = nested_p == start; parseResult = Var_Parse(&nested_p, SCOPE_CMDLINE, emode, inout_str); /* TODO: handle errors */ if (inout_str->str == var_Error) { if (parseResult == VPR_ERR) { /* * FIXME: Even if an error occurs, there is no * guarantee that it is reported. * * See cond-token-plain.mk $$$$$$$$. */ par->printedError = true; } /* * XXX: Can there be any situation in which a returned * var_Error needs to be freed? */ FStr_Done(inout_str); /* * Even if !doEval, we still report syntax errors, which is * what getting var_Error back with !doEval means. */ *inout_str = FStr_InitRefer(NULL); return false; } par->p = nested_p; /* * If the '$' started the string literal (which means no quotes), and * the variable expression is followed by a space, looks like a * comparison operator or is the end of the expression, we are done. */ if (atStart && is_separator(par->p[0])) return false; Buf_AddStr(buf, inout_str->str); FStr_Done(inout_str); *inout_str = FStr_InitRefer(NULL); /* not finished yet */ return true; } /* * Parse a string from a variable expression or an optionally quoted * string. This is called for the left-hand and right-hand sides of * comparisons. * * Results: * Returns the string, absent any quotes, or NULL on error. * Sets out_quoted if the leaf was a quoted string literal. */ static void -CondParser_Leaf(CondParser *par, bool doEval, bool strictLHS, +CondParser_Leaf(CondParser *par, bool doEval, bool unquotedOK, FStr *out_str, bool *out_quoted) { Buffer buf; FStr str; bool quoted; const char *start; Buf_Init(&buf); str = FStr_InitRefer(NULL); *out_quoted = quoted = par->p[0] == '"'; start = par->p; if (quoted) par->p++; while (par->p[0] != '\0' && str.str == NULL) { switch (par->p[0]) { case '\\': par->p++; if (par->p[0] != '\0') { Buf_AddByte(&buf, par->p[0]); par->p++; } continue; case '"': par->p++; if (quoted) goto got_str; /* skip the closing quote */ Buf_AddByte(&buf, '"'); continue; case ')': /* see is_separator */ case '!': case '=': case '>': case '<': case ' ': case '\t': if (!quoted) goto got_str; Buf_AddByte(&buf, par->p[0]); par->p++; continue; case '$': if (!CondParser_StringExpr(par, start, doEval, quoted, &buf, &str)) goto cleanup; continue; default: - if (strictLHS && !quoted && *start != '$' && + if (!unquotedOK && !quoted && *start != '$' && !ch_isdigit(*start)) { /* * The left-hand side must be quoted, - * a variable reference or a number. + * a variable expression or a number. */ str = FStr_InitRefer(NULL); goto cleanup; } Buf_AddByte(&buf, par->p[0]); par->p++; continue; } } got_str: str = FStr_InitOwn(buf.data); + buf.data = NULL; cleanup: - Buf_DoneData(&buf); /* XXX: memory leak on failure? */ + Buf_Done(&buf); *out_str = str; } static bool -EvalBare(const CondParser *par, const char *arg, size_t arglen) +EvalBare(const CondParser *par, const char *arg) { - bool res = par->evalBare(arglen, arg); + bool res = par->evalBare(arg); return par->negateEvalBare ? !res : res; } /* * Evaluate a "comparison without operator", such as in ".if ${VAR}" or * ".if 0". */ static bool EvalNotEmpty(CondParser *par, const char *value, bool quoted) { double num; /* For .ifxxx "...", check for non-empty string. */ if (quoted) return value[0] != '\0'; /* For .ifxxx , compare against zero */ if (TryParseNumber(value, &num)) return num != 0.0; /* For .if ${...}, check for non-empty string. This is different from * the evaluation function from that .if variant, which would test * whether a variable of the given name were defined. */ - /* XXX: Whitespace should count as empty, just as in ParseEmptyArg. */ + /* + * XXX: Whitespace should count as empty, just as in + * CondParser_FuncCallEmpty. + */ if (par->plain) return value[0] != '\0'; - return EvalBare(par, value, strlen(value)); + return EvalBare(par, value); } /* Evaluate a numerical comparison, such as in ".if ${VAR} >= 9". */ static bool EvalCompareNum(double lhs, ComparisonOp op, double rhs) { DEBUG3(COND, "lhs = %f, rhs = %f, op = %.2s\n", lhs, rhs, opname[op]); switch (op) { case LT: return lhs < rhs; case LE: return lhs <= rhs; case GT: return lhs > rhs; case GE: return lhs >= rhs; case NE: return lhs != rhs; default: return lhs == rhs; } } static Token EvalCompareStr(CondParser *par, const char *lhs, ComparisonOp op, const char *rhs) { if (op != EQ && op != NE) { Parse_Error(PARSE_FATAL, "String comparison operator must be either == or !="); par->printedError = true; return TOK_ERROR; } DEBUG3(COND, "lhs = \"%s\", rhs = \"%s\", op = %.2s\n", lhs, rhs, opname[op]); return ToToken((op == EQ) == (strcmp(lhs, rhs) == 0)); } /* Evaluate a comparison, such as "${VAR} == 12345". */ static Token EvalCompare(CondParser *par, const char *lhs, bool lhsQuoted, ComparisonOp op, const char *rhs, bool rhsQuoted) { double left, right; if (!rhsQuoted && !lhsQuoted) if (TryParseNumber(lhs, &left) && TryParseNumber(rhs, &right)) return ToToken(EvalCompareNum(left, op, right)); return EvalCompareStr(par, lhs, op, rhs); } static bool CondParser_ComparisonOp(CondParser *par, ComparisonOp *out_op) { const char *p = par->p; if (p[0] == '<' && p[1] == '=') { *out_op = LE; goto length_2; } else if (p[0] == '<') { *out_op = LT; goto length_1; } else if (p[0] == '>' && p[1] == '=') { *out_op = GE; goto length_2; } else if (p[0] == '>') { *out_op = GT; goto length_1; } else if (p[0] == '=' && p[1] == '=') { *out_op = EQ; goto length_2; } else if (p[0] == '!' && p[1] == '=') { *out_op = NE; goto length_2; } return false; length_2: par->p = p + 2; return true; length_1: par->p = p + 1; return true; } /* * Parse a comparison condition such as: * * 0 * ${VAR:Mpattern} * ${VAR} == value * ${VAR:U0} < 12345 */ static Token CondParser_Comparison(CondParser *par, bool doEval) { Token t = TOK_ERROR; FStr lhs, rhs; ComparisonOp op; bool lhsQuoted, rhsQuoted; - /* - * Parse the variable spec and skip over it, saving its - * value in lhs. - */ - CondParser_Leaf(par, doEval, lhsStrict, &lhs, &lhsQuoted); + CondParser_Leaf(par, doEval, par->leftUnquotedOK, &lhs, &lhsQuoted); if (lhs.str == NULL) goto done_lhs; CondParser_SkipWhitespace(par); if (!CondParser_ComparisonOp(par, &op)) { /* Unknown operator, compare against an empty string or 0. */ t = ToToken(doEval && EvalNotEmpty(par, lhs.str, lhsQuoted)); goto done_lhs; } CondParser_SkipWhitespace(par); if (par->p[0] == '\0') { Parse_Error(PARSE_FATAL, - "Missing right-hand-side of operator '%s'", opname[op]); + "Missing right-hand side of operator '%s'", opname[op]); par->printedError = true; goto done_lhs; } - CondParser_Leaf(par, doEval, false, &rhs, &rhsQuoted); + CondParser_Leaf(par, doEval, true, &rhs, &rhsQuoted); if (rhs.str == NULL) goto done_rhs; if (!doEval) { t = TOK_FALSE; goto done_rhs; } t = EvalCompare(par, lhs.str, lhsQuoted, op, rhs.str, rhsQuoted); done_rhs: FStr_Done(&rhs); done_lhs: FStr_Done(&lhs); return t; } /* * The argument to empty() is a variable name, optionally followed by * variable modifiers. */ -/*ARGSUSED*/ -static size_t -ParseEmptyArg(CondParser *par MAKE_ATTR_UNUSED, const char **pp, - bool doEval, const char *func MAKE_ATTR_UNUSED, - char **out_arg) +static bool +CondParser_FuncCallEmpty(CondParser *par, bool doEval, Token *out_token) { + const char *cp = par->p; + Token tok; FStr val; - size_t magic_res; - /* We do all the work here and return the result as the length */ - *out_arg = NULL; + if (!is_token(cp, "empty", 5)) + return false; + cp += 5; + + cpp_skip_whitespace(&cp); + if (*cp != '(') + return false; - (*pp)--; /* Make (*pp)[1] point to the '('. */ - (void)Var_Parse(pp, SCOPE_CMDLINE, + cp--; /* Make cp[1] point to the '('. */ + (void)Var_Parse(&cp, SCOPE_CMDLINE, doEval ? VARE_WANTRES : VARE_PARSE_ONLY, &val); /* TODO: handle errors */ - /* If successful, *pp points beyond the closing ')' now. */ - if (val.str == var_Error) { - FStr_Done(&val); - return (size_t)-1; + if (val.str == var_Error) + tok = TOK_ERROR; + else { + cpp_skip_whitespace(&val.str); + tok = val.str[0] != '\0' && doEval ? TOK_FALSE : TOK_TRUE; } - /* - * A variable is empty when it just contains spaces... - * 4/15/92, christos - */ - cpp_skip_whitespace(&val.str); - - /* - * For consistency with the other functions we can't generate the - * true/false here. - */ - magic_res = val.str[0] != '\0' ? 2 : 1; FStr_Done(&val); - return magic_res; -} - -/*ARGSUSED*/ -static bool -FuncEmpty(size_t arglen, const char *arg MAKE_ATTR_UNUSED) -{ - /* Magic values ahead, see ParseEmptyArg. */ - return arglen == 1; + *out_token = tok; + par->p = cp; + return true; } /* Parse a function call expression, such as 'defined(${file})'. */ static bool CondParser_FuncCall(CondParser *par, bool doEval, Token *out_token) { static const struct fn_def { - const char *fn_name; - size_t fn_name_len; - size_t (*fn_parse)(CondParser *, const char **, bool, - const char *, char **); - bool (*fn_eval)(size_t, const char *); + const char fn_name[9]; + unsigned char fn_name_len; + bool (*fn_eval)(const char *); } fns[] = { - { "defined", 7, ParseFuncArg, FuncDefined }, - { "make", 4, ParseFuncArg, FuncMake }, - { "exists", 6, ParseFuncArg, FuncExists }, - { "empty", 5, ParseEmptyArg, FuncEmpty }, - { "target", 6, ParseFuncArg, FuncTarget }, - { "commands", 8, ParseFuncArg, FuncCommands } + { "defined", 7, FuncDefined }, + { "make", 4, FuncMake }, + { "exists", 6, FuncExists }, + { "target", 6, FuncTarget }, + { "commands", 8, FuncCommands } }; const struct fn_def *fn; char *arg = NULL; size_t arglen; const char *cp = par->p; - const struct fn_def *fns_end = fns + sizeof fns / sizeof fns[0]; - - for (fn = fns; fn != fns_end; fn++) { - if (!is_token(cp, fn->fn_name, fn->fn_name_len)) - continue; + const struct fn_def *last_fn = fns + sizeof fns / sizeof fns[0] - 1; - cp += fn->fn_name_len; - cpp_skip_whitespace(&cp); - if (*cp != '(') - break; + for (fn = fns; !is_token(cp, fn->fn_name, fn->fn_name_len); fn++) + if (fn == last_fn) + return false; - arglen = fn->fn_parse(par, &cp, doEval, fn->fn_name, &arg); - if (arglen == 0 || arglen == (size_t)-1) { - par->p = cp; - *out_token = arglen == 0 ? TOK_FALSE : TOK_ERROR; - return true; - } + cp += fn->fn_name_len; + cpp_skip_whitespace(&cp); + if (*cp != '(') + return false; - /* Evaluate the argument using the required function. */ - *out_token = ToToken(!doEval || fn->fn_eval(arglen, arg)); - free(arg); - par->p = cp; - return true; - } + arglen = ParseWord(par, &cp, doEval, fn->fn_name, &arg); + *out_token = ToToken(arglen != 0 && (!doEval || fn->fn_eval(arg))); - return false; + free(arg); + par->p = cp; + return true; } /* - * Parse a comparison such as '${VAR} == "value"', or a simple leaf without + * Parse a comparison that neither starts with '"' nor '$', such as the + * unusual 'bare == right' or '3 == ${VAR}', or a simple leaf without * operator, which is a number, a variable expression or a string literal. + * + * TODO: Can this be merged into CondParser_Comparison? */ static Token CondParser_ComparisonOrLeaf(CondParser *par, bool doEval) { Token t; char *arg = NULL; - size_t arglen; const char *cp; const char *cp1; /* Push anything numeric through the compare expression */ cp = par->p; if (ch_isdigit(cp[0]) || cp[0] == '-' || cp[0] == '+') return CondParser_Comparison(par, doEval); /* * Most likely we have a naked token to apply the default function to. * However ".if a == b" gets here when the "a" is unquoted and doesn't * start with a '$'. This surprises people. * If what follows the function argument is a '=' or '!' then the * syntax would be invalid if we did "defined(a)" - so instead treat * as an expression. */ /* * XXX: Is it possible to have a variable expression evaluated twice * at this point? */ - arglen = ParseFuncArg(par, &cp, doEval, NULL, &arg); + (void)ParseWord(par, &cp, doEval, NULL, &arg); cp1 = cp; cpp_skip_whitespace(&cp1); if (*cp1 == '=' || *cp1 == '!' || *cp1 == '<' || *cp1 == '>') return CondParser_Comparison(par, doEval); par->p = cp; /* * Evaluate the argument using the default function. * This path always treats .if as .ifdef. To get here, the character * after .if must have been taken literally, so the argument cannot * be empty - even if it contained a variable expansion. */ - t = ToToken(!doEval || EvalBare(par, arg, arglen)); + t = ToToken(!doEval || EvalBare(par, arg)); free(arg); return t; } /* Return the next token or comparison result from the parser. */ static Token CondParser_Token(CondParser *par, bool doEval) { Token t; t = par->curr; if (t != TOK_NONE) { par->curr = TOK_NONE; return t; } cpp_skip_hspace(&par->p); switch (par->p[0]) { case '(': par->p++; return TOK_LPAREN; case ')': par->p++; return TOK_RPAREN; case '|': par->p++; if (par->p[0] == '|') par->p++; else if (opts.strict) { Parse_Error(PARSE_FATAL, "Unknown operator '|'"); par->printedError = true; return TOK_ERROR; } return TOK_OR; case '&': par->p++; if (par->p[0] == '&') par->p++; else if (opts.strict) { Parse_Error(PARSE_FATAL, "Unknown operator '&'"); par->printedError = true; return TOK_ERROR; } return TOK_AND; case '!': par->p++; return TOK_NOT; case '#': /* XXX: see unit-tests/cond-token-plain.mk */ case '\n': /* XXX: why should this end the condition? */ /* Probably obsolete now, from 1993-03-21. */ case '\0': return TOK_EOF; case '"': case '$': return CondParser_Comparison(par, doEval); default: + if (CondParser_FuncCallEmpty(par, doEval, &t)) + return t; if (CondParser_FuncCall(par, doEval, &t)) return t; return CondParser_ComparisonOrLeaf(par, doEval); } } +/* Skip the next token if it equals t. */ +static bool +CondParser_Skip(CondParser *par, Token t) +{ + Token actual; + + actual = CondParser_Token(par, false); + if (actual == t) + return true; + + assert(par->curr == TOK_NONE); + assert(actual != TOK_NONE); + par->curr = actual; + return false; +} + /* * Term -> '(' Or ')' * Term -> '!' Term * Term -> Leaf Operator Leaf * Term -> Leaf */ static CondResult CondParser_Term(CondParser *par, bool doEval) { CondResult res; Token t; t = CondParser_Token(par, doEval); if (t == TOK_TRUE) return CR_TRUE; if (t == TOK_FALSE) return CR_FALSE; if (t == TOK_LPAREN) { res = CondParser_Or(par, doEval); if (res == CR_ERROR) return CR_ERROR; if (CondParser_Token(par, doEval) != TOK_RPAREN) return CR_ERROR; return res; } if (t == TOK_NOT) { res = CondParser_Term(par, doEval); if (res == CR_TRUE) res = CR_FALSE; else if (res == CR_FALSE) res = CR_TRUE; return res; } return CR_ERROR; } /* - * And -> Term '&&' And - * And -> Term + * And -> Term ('&&' Term)* */ static CondResult CondParser_And(CondParser *par, bool doEval) { - CondResult res; - Token op; - - res = CondParser_Term(par, doEval); - if (res == CR_ERROR) - return CR_ERROR; + CondResult res, rhs; - op = CondParser_Token(par, doEval); - if (op == TOK_AND) { - if (res == CR_TRUE) - return CondParser_And(par, doEval); - if (CondParser_And(par, false) == CR_ERROR) + res = CR_TRUE; + do { + if ((rhs = CondParser_Term(par, doEval)) == CR_ERROR) return CR_ERROR; - return res; - } + if (rhs == CR_FALSE) { + res = CR_FALSE; + doEval = false; + } + } while (CondParser_Skip(par, TOK_AND)); - CondParser_PushBack(par, op); return res; } /* - * Or -> And '||' Or - * Or -> And + * Or -> And ('||' And)* */ static CondResult CondParser_Or(CondParser *par, bool doEval) { - CondResult res; - Token op; + CondResult res, rhs; - res = CondParser_And(par, doEval); - if (res == CR_ERROR) - return CR_ERROR; - - op = CondParser_Token(par, doEval); - if (op == TOK_OR) { - if (res == CR_FALSE) - return CondParser_Or(par, doEval); - if (CondParser_Or(par, false) == CR_ERROR) + res = CR_FALSE; + do { + if ((rhs = CondParser_And(par, doEval)) == CR_ERROR) return CR_ERROR; - return res; - } + if (rhs == CR_TRUE) { + res = CR_TRUE; + doEval = false; + } + } while (CondParser_Skip(par, TOK_OR)); - CondParser_PushBack(par, op); return res; } static CondEvalResult CondParser_Eval(CondParser *par, bool *out_value) { CondResult res; DEBUG1(COND, "CondParser_Eval: %s\n", par->p); res = CondParser_Or(par, true); if (res == CR_ERROR) return COND_INVALID; if (CondParser_Token(par, false) != TOK_EOF) return COND_INVALID; *out_value = res == CR_TRUE; return COND_PARSE; } /* * Evaluate the condition, including any side effects from the variable * expressions in the condition. The condition consists of &&, ||, !, * function(arg), comparisons and parenthetical groupings thereof. * * Results: * COND_PARSE if the condition was valid grammatically * COND_INVALID if not a valid conditional. * - * (*value) is set to the boolean value of the condition + * *out_value is set to the boolean value of the condition */ static CondEvalResult CondEvalExpression(const char *cond, bool *out_value, bool plain, - bool (*evalBare)(size_t, const char *), bool negate, - bool eprint, bool strictLHS) + bool (*evalBare)(const char *), bool negate, + bool eprint, bool leftUnquotedOK) { CondParser par; CondEvalResult rval; - lhsStrict = strictLHS; - cpp_skip_hspace(&cond); par.plain = plain; par.evalBare = evalBare; par.negateEvalBare = negate; + par.leftUnquotedOK = leftUnquotedOK; par.p = cond; par.curr = TOK_NONE; par.printedError = false; rval = CondParser_Eval(&par, out_value); if (rval == COND_INVALID && eprint && !par.printedError) Parse_Error(PARSE_FATAL, "Malformed conditional (%s)", cond); return rval; } /* * Evaluate a condition in a :? modifier, such as * ${"${VAR}" == value:?yes:no}. */ CondEvalResult Cond_EvalCondition(const char *cond, bool *out_value) { return CondEvalExpression(cond, out_value, true, - FuncDefined, false, false, false); + FuncDefined, false, false, true); } static bool IsEndif(const char *p) { return p[0] == 'e' && p[1] == 'n' && p[2] == 'd' && p[3] == 'i' && p[4] == 'f' && !ch_isalpha(p[5]); } static bool DetermineKindOfConditional(const char **pp, bool *out_plain, - bool (**out_evalBare)(size_t, const char *), + bool (**out_evalBare)(const char *), bool *out_negate) { const char *p = *pp; p += 2; *out_plain = false; *out_evalBare = FuncDefined; *out_negate = false; if (*p == 'n') { p++; *out_negate = true; } if (is_token(p, "def", 3)) { /* .ifdef and .ifndef */ p += 3; } else if (is_token(p, "make", 4)) { /* .ifmake and .ifnmake */ p += 4; *out_evalBare = FuncMake; } else if (is_token(p, "", 0) && !*out_negate) { /* plain .if */ *out_plain = true; } else { /* * TODO: Add error message about unknown directive, * since there is no other known directive that starts * with 'el' or 'if'. * * Example: .elifx 123 */ return false; } *pp = p; return true; } /* * Evaluate the conditional directive in the line, which is one of: * * .if * .ifmake * .ifnmake * .ifdef * .ifndef * .elif * .elifmake * .elifnmake * .elifdef * .elifndef * .else * .endif * * In these directives, consists of &&, ||, !, function(arg), * comparisons, expressions, bare words, numbers and strings, and * parenthetical groupings thereof. * * Results: * COND_PARSE to continue parsing the lines that follow the * conditional (when evaluates to true) * COND_SKIP to skip the lines after the conditional * (when evaluates to false, or when a previous * branch has already been taken) * COND_INVALID if the conditional was not valid, either because of * a syntax error or because some variable was undefined * or because the condition could not be evaluated */ CondEvalResult Cond_EvalLine(const char *line) { typedef enum IfState { /* None of the previous evaluated to true. */ IFS_INITIAL = 0, /* The previous evaluated to true. * The lines following this condition are interpreted. */ IFS_ACTIVE = 1 << 0, /* The previous directive was an '.else'. */ IFS_SEEN_ELSE = 1 << 1, /* One of the previous evaluated to true. */ IFS_WAS_ACTIVE = 1 << 2 } IfState; static enum IfState *cond_states = NULL; static unsigned int cond_states_cap = 128; bool plain; - bool (*evalBare)(size_t, const char *); + bool (*evalBare)(const char *); bool negate; bool isElif; bool value; IfState state; const char *p = line; if (cond_states == NULL) { cond_states = bmake_malloc( cond_states_cap * sizeof *cond_states); cond_states[0] = IFS_ACTIVE; } p++; /* skip the leading '.' */ cpp_skip_hspace(&p); if (IsEndif(p)) { /* It is an '.endif'. */ if (p[5] != '\0') { Parse_Error(PARSE_FATAL, - "The .endif directive does not take arguments."); + "The .endif directive does not take arguments"); } if (cond_depth == cond_min_depth) { Parse_Error(PARSE_FATAL, "if-less endif"); return COND_PARSE; } /* Return state for previous conditional */ cond_depth--; return cond_states[cond_depth] & IFS_ACTIVE ? COND_PARSE : COND_SKIP; } /* Parse the name of the directive, such as 'if', 'elif', 'endif'. */ if (p[0] == 'e') { if (p[1] != 'l') { /* * Unknown directive. It might still be a - * transformation rule like '.elisp.scm', + * transformation rule like '.err.txt', * therefore no error message here. */ return COND_INVALID; } /* Quite likely this is 'else' or 'elif' */ p += 2; if (is_token(p, "se", 2)) { /* It is an 'else'. */ if (p[2] != '\0') Parse_Error(PARSE_FATAL, - "The .else directive " - "does not take arguments."); + "The .else directive " + "does not take arguments"); if (cond_depth == cond_min_depth) { Parse_Error(PARSE_FATAL, "if-less else"); return COND_PARSE; } state = cond_states[cond_depth]; if (state == IFS_INITIAL) { state = IFS_ACTIVE | IFS_SEEN_ELSE; } else { if (state & IFS_SEEN_ELSE) Parse_Error(PARSE_WARNING, "extra else"); state = IFS_WAS_ACTIVE | IFS_SEEN_ELSE; } cond_states[cond_depth] = state; return state & IFS_ACTIVE ? COND_PARSE : COND_SKIP; } /* Assume for now it is an elif */ isElif = true; } else isElif = false; if (p[0] != 'i' || p[1] != 'f') { /* * Unknown directive. It might still be a transformation rule * like '.elisp.scm', therefore no error message here. */ return COND_INVALID; /* Not an ifxxx or elifxxx line */ } if (!DetermineKindOfConditional(&p, &plain, &evalBare, &negate)) return COND_INVALID; if (isElif) { if (cond_depth == cond_min_depth) { Parse_Error(PARSE_FATAL, "if-less elif"); return COND_PARSE; } state = cond_states[cond_depth]; if (state & IFS_SEEN_ELSE) { Parse_Error(PARSE_WARNING, "extra elif"); cond_states[cond_depth] = IFS_WAS_ACTIVE | IFS_SEEN_ELSE; return COND_SKIP; } if (state != IFS_INITIAL) { cond_states[cond_depth] = IFS_WAS_ACTIVE; return COND_SKIP; } } else { /* Normal .if */ if (cond_depth + 1 >= cond_states_cap) { /* * This is rare, but not impossible. * In meta mode, dirdeps.mk (only runs at level 0) * can need more than the default. */ cond_states_cap += 32; cond_states = bmake_realloc(cond_states, cond_states_cap * sizeof *cond_states); } state = cond_states[cond_depth]; cond_depth++; if (!(state & IFS_ACTIVE)) { /* * If we aren't parsing the data, * treat as always false. */ cond_states[cond_depth] = IFS_WAS_ACTIVE; return COND_SKIP; } } /* And evaluate the conditional expression */ if (CondEvalExpression(p, &value, plain, evalBare, negate, - true, true) == COND_INVALID) { + true, false) == COND_INVALID) { /* Syntax error in conditional, error message already output. */ /* Skip everything to matching .endif */ /* XXX: An extra '.else' is not detected in this case. */ cond_states[cond_depth] = IFS_WAS_ACTIVE; return COND_SKIP; } if (!value) { cond_states[cond_depth] = IFS_INITIAL; return COND_SKIP; } cond_states[cond_depth] = IFS_ACTIVE; return COND_PARSE; } void Cond_restore_depth(unsigned int saved_depth) { unsigned int open_conds = cond_depth - cond_min_depth; if (open_conds != 0 || saved_depth > cond_depth) { Parse_Error(PARSE_FATAL, "%u open conditional%s", open_conds, open_conds == 1 ? "" : "s"); cond_depth = cond_min_depth; } cond_min_depth = saved_depth; } unsigned int Cond_save_depth(void) { unsigned int depth = cond_min_depth; cond_min_depth = cond_depth; return depth; } diff --git a/contrib/bmake/config.h.in b/contrib/bmake/config.h.in index 18f07aeda37f..aebebe783a44 100644 --- a/contrib/bmake/config.h.in +++ b/contrib/bmake/config.h.in @@ -1,347 +1,393 @@ /* config.h.in. Generated from configure.in by autoheader. */ /* Define if building universal (internal helper macro) */ #undef AC_APPLE_UNIVERSAL_BUILD /* Path of default shell */ #undef DEFSHELL_CUSTOM /* Shell spec to use by default */ #undef DEFSHELL_INDEX +/* Path of default shell */ +#undef DEFSHELL_PATH + /* Define to 1 if you have the header file. */ #undef HAVE_AR_H /* Define to 1 if you have the declaration of `sys_siglist', and to 0 if you don't. */ #undef HAVE_DECL_SYS_SIGLIST /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_DIRENT_H /* Define to 1 if you have the `dirname' function. */ #undef HAVE_DIRNAME /* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ #undef HAVE_DOPRNT /* Define to 1 if you have the `err' function. */ #undef HAVE_ERR /* Define to 1 if you have the `errx' function. */ #undef HAVE_ERRX /* Define to 1 if you have the header file. */ #undef HAVE_ERR_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the `fork' function. */ #undef HAVE_FORK /* Define to 1 if you have the `getcwd' function. */ #undef HAVE_GETCWD /* Define to 1 if you have the `getenv' function. */ #undef HAVE_GETENV /* Define to 1 if you have the `getopt' function. */ #undef HAVE_GETOPT /* Define to 1 if you have the `getwd' function. */ #undef HAVE_GETWD /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the `killpg' function. */ #undef HAVE_KILLPG /* Define to 1 if you have the header file. */ #undef HAVE_LIBGEN_H /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H +/* Define to 1 if the system has the type `long long int'. */ +#undef HAVE_LONG_LONG_INT + /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `mmap' function. */ #undef HAVE_MMAP /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_PATHS_H /* Define to 1 if you have the header file. */ #undef HAVE_POLL_H /* Define to 1 if you have the `putenv' function. */ #undef HAVE_PUTENV /* Define to 1 if you have the header file. */ #undef HAVE_RANLIB_H /* Define to 1 if you have the `realpath' function. */ #undef HAVE_REALPATH /* Define to 1 if you have the `select' function. */ #undef HAVE_SELECT /* Define to 1 if you have the `setenv' function. */ #undef HAVE_SETENV /* Define to 1 if you have the `setpgid' function. */ #undef HAVE_SETPGID +/* Define to 1 if you have the `setrlimit' function. */ +#undef HAVE_SETRLIMIT + /* Define to 1 if you have the `setsid' function. */ #undef HAVE_SETSID /* Define to 1 if you have the `sigaction' function. */ #undef HAVE_SIGACTION +/* Define to 1 if you have the `sigaddset' function. */ +#undef HAVE_SIGADDSET + +/* Define to 1 if you have the `sigpending' function. */ +#undef HAVE_SIGPENDING + +/* Define to 1 if you have the `sigprocmask' function. */ +#undef HAVE_SIGPROCMASK + +/* Define to 1 if you have the `sigsetmask' function. */ +#undef HAVE_SIGSETMASK + +/* Define to 1 if you have the `sigsuspend' function. */ +#undef HAVE_SIGSUSPEND + /* Define to 1 if you have the `sigvec' function. */ #undef HAVE_SIGVEC +/* Define to 1 if the system has the type `sig_atomic_t'. */ +#undef HAVE_SIG_ATOMIC_T + /* Define to 1 if you have the `snprintf' function. */ #undef HAVE_SNPRINTF /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the `stresep' function. */ #undef HAVE_STRESEP /* Define to 1 if you have the `strftime' function. */ #undef HAVE_STRFTIME /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strlcpy' function. */ #undef HAVE_STRLCPY /* Define to 1 if you have the `strsep' function. */ #undef HAVE_STRSEP /* Define to 1 if you have the `strtod' function. */ #undef HAVE_STRTOD /* Define to 1 if you have the `strtol' function. */ #undef HAVE_STRTOL +/* Define to 1 if you have the `strtoll' function. */ +#undef HAVE_STRTOLL + +/* Define to 1 if you have the `strtoul' function. */ +#undef HAVE_STRTOUL + /* Define to 1 if `st_rdev' is a member of `struct stat'. */ #undef HAVE_STRUCT_STAT_ST_RDEV /* Define to 1 if your `struct stat' has `st_rdev'. Deprecated, use `HAVE_STRUCT_STAT_ST_RDEV' instead. */ #undef HAVE_ST_RDEV /* Define to 1 if you have the `sysctl' function. */ #undef HAVE_SYSCTL /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_DIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_MMAN_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SELECT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SOCKET_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SYSCTL_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_UIO_H /* Define to 1 if you have that is POSIX.1 compatible. */ #undef HAVE_SYS_WAIT_H /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the `unsetenv' function. */ #undef HAVE_UNSETENV +/* Define to 1 if the system has the type `unsigned long long int'. */ +#undef HAVE_UNSIGNED_LONG_LONG_INT + /* Define to 1 if you have the header file. */ #undef HAVE_UTIME_H /* Define to 1 if you have the `vfork' function. */ #undef HAVE_VFORK /* Define to 1 if you have the header file. */ #undef HAVE_VFORK_H /* Define to 1 if you have the `vprintf' function. */ #undef HAVE_VPRINTF /* Define to 1 if you have the `vsnprintf' function. */ #undef HAVE_VSNPRINTF /* Define to 1 if you have the `wait3' function. */ #undef HAVE_WAIT3 /* Define to 1 if you have the `wait4' function. */ #undef HAVE_WAIT4 /* Define to 1 if you have the `waitpid' function. */ #undef HAVE_WAITPID /* Define to 1 if you have the `warn' function. */ #undef HAVE_WARN /* Define to 1 if you have the `warnx' function. */ #undef HAVE_WARNX /* Define to 1 if `fork' works. */ #undef HAVE_WORKING_FORK /* Define to 1 if `vfork' works. */ #undef HAVE_WORKING_VFORK /* define if your compiler has __attribute__ */ #undef HAVE___ATTRIBUTE__ /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define as the return type of signal handlers (`int' or `void'). */ #undef RETSIGTYPE /* Define to 1 if the `S_IS*' macros in do not work properly. */ #undef STAT_MACROS_BROKEN /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* Enable extensions on AIX 3, Interix. */ #ifndef _ALL_SOURCE # undef _ALL_SOURCE #endif /* Enable GNU extensions on systems that have them. */ #ifndef _GNU_SOURCE # undef _GNU_SOURCE #endif /* Enable threading extensions on Solaris. */ #ifndef _POSIX_PTHREAD_SEMANTICS # undef _POSIX_PTHREAD_SEMANTICS #endif /* Enable extensions on HP NonStop. */ #ifndef _TANDEM_SOURCE # undef _TANDEM_SOURCE #endif /* Enable general extensions on Solaris. */ #ifndef __EXTENSIONS__ # undef __EXTENSIONS__ #endif /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel). */ #if defined AC_APPLE_UNIVERSAL_BUILD # if defined __BIG_ENDIAN__ # define WORDS_BIGENDIAN 1 # endif #else # ifndef WORDS_BIGENDIAN # undef WORDS_BIGENDIAN # endif #endif /* Define to 1 if on MINIX. */ #undef _MINIX /* Define to 2 if the system does not provide POSIX.1 features except with this defined. */ #undef _POSIX_1_SOURCE /* Define to 1 if you need to in order for `stat' and other things to work. */ #undef _POSIX_SOURCE /* Define for Solaris 2.5.1 so the uint32_t typedef from , , or is not used. If the typedef were allowed, the #define below would cause a syntax error. */ #undef _UINT32_T /* C99 function name */ #undef __func__ /* Define to empty if `const' does not conform to ANSI C. */ #undef const +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +#undef inline +#endif + +/* Define to the type of a signed integer type of width exactly 64 bits if + such a type exists and the standard includes do not define it. */ +#undef int64_t + /* Define to `int' if does not define. */ #undef mode_t /* Define to `long int' if does not define. */ #undef off_t /* Define to `int' if does not define. */ #undef pid_t /* type that signal handlers can safely frob */ #undef sig_atomic_t /* Define to `unsigned int' if does not define. */ #undef size_t /* Define to the type of an unsigned integer type of width exactly 32 bits if such a type exists and the standard includes do not define it. */ #undef uint32_t /* Define as `fork' if `vfork' does not work. */ #undef vfork diff --git a/contrib/bmake/configure b/contrib/bmake/configure index 6dbf5ad31a00..42295d1db3e3 100755 --- a/contrib/bmake/configure +++ b/contrib/bmake/configure @@ -1,7467 +1,7840 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for bmake 20210201. +# Generated by GNU Autoconf 2.69 for bmake 20211020. # # Report bugs to . # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. # # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # Use a proper internal environment variable to ensure we don't fall # into an infinite loop, continuously re-executing ourselves. if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then _as_can_reexec=no; export _as_can_reexec; # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 as_fn_exit 255 fi # We don't want this to propagate to other subprocesses. { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1 test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : export CONFIG_SHELL # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. # Preserve -v and -x to the replacement shell. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV case $- in # (((( *v*x* | *x*v* ) as_opts=-vx ;; *v* ) as_opts=-v ;; *x* ) as_opts=-x ;; * ) as_opts= ;; esac exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} # Admittedly, this is quite paranoid, since all the known shells bail # out after a failed `exec'. $as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 exit 255 fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org and sjg@NetBSD.org $0: about your system, including any error possibly output $0: before this message. Then install a modern shell, or $0: manually run the script under such a shell if you do $0: have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # If we had to re-execute with $CONFIG_SHELL, we're ensured to have # already done that, so ensure we don't try to do so again and fall # in an infinite loop. This has already happened in practice. _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" test -n "$DJDIR" || exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME='bmake' PACKAGE_TARNAME='bmake' -PACKAGE_VERSION='20210201' -PACKAGE_STRING='bmake 20210201' +PACKAGE_VERSION='20211020' +PACKAGE_STRING='bmake 20211020' PACKAGE_BUGREPORT='sjg@NetBSD.org' PACKAGE_URL='' # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='LTLIBOBJS +UTC_1 _MAKE_VERSION filemon_h use_filemon use_meta diff_u +diff GCC INSTALL default_sys_path mksrc force_machine_arch machine_arch force_machine machine LIBOBJS bmake_path_max ac_exe_suffix INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM EGREP GREP CPP OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking with_defshell with_makefile with_meta with_filemon with_machine with_force_machine with_force_machine_arch with_machine_arch with_default_sys_path with_path_objdirprefix enable_pwd_override enable_check_make_chdir with_mksrc ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *=) ac_optarg= ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error $? "unrecognized option: \`$ac_option' Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures bmake 20210201 to adapt to many kinds of systems. +\`configure' configures bmake 20211020 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/bmake] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of bmake 20210201:";; + short | recursive ) echo "Configuration of bmake 20211020:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-pwd-override disable $PWD overriding getcwd() --disable-check-make-chdir disable make trying to guess when it should automatically cd ${.CURDIR} Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-defshell=SHELL use SHELL by default - must be sh compatible, use sh or ksh to pick the internal definitions --without-makefile disable use of generated makefile --without-meta disable use of meta-mode --with-filemon={no,dev,ktrace,path/filemon.h} indicate filemon method for meta-mode. Path to filemon.h implies dev --with-machine=MACHINE explicitly set MACHINE --with-force-machine=MACHINE set FORCE_MACHINE --with-force-machine-arch=MACHINE set FORCE_MACHINE_ARCH --with-machine_arch=MACHINE_ARCH explicitly set MACHINE_ARCH --with-default-sys-path=PATH:DIR:LIST use an explicit _PATH_DEFSYSPATH MAKESYSPATH is a ':' separated list of directories that bmake will search for system .mk files. _PATH_DEFSYSPATH is its default value. --with-path-objdirprefix=PATH override _PATH_OBJDIRPREFIX --with-mksrc=PATH tell makefile.boot where to find mk src Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to . _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -bmake configure 20210201 +bmake configure 20211020 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } > conftest.i && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if eval \${$3+:} false; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.i conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ( $as_echo "## ----------------------------- ## ## Report this to sjg@NetBSD.org ## ## ----------------------------- ##" ) | sed "s/^/$as_me: WARNING: /" >&2 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_mongrel # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_header_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || test -x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno as_fn_set_status $ac_retval } # ac_fn_c_try_link +# ac_fn_c_find_intX_t LINENO BITS VAR +# ----------------------------------- +# Finds a signed integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_intX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 +$as_echo_n "checking for int$2_t... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in int$2_t 'int' 'long int' \ + 'long long int' 'short int' 'signed char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + enum { N = $2 / 2 - 1 }; +int +main () +{ +static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + enum { N = $2 / 2 - 1 }; +int +main () +{ +static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) + < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + case $ac_type in #( + int$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if eval test \"x\$"$3"\" = x"no"; then : + +else + break +fi + done +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_find_intX_t + # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_type # ac_fn_c_find_uintX_t LINENO BITS VAR # ------------------------------------ # Finds an unsigned integer type with width BITS, setting cache variable VAR # accordingly. ac_fn_c_find_uintX_t () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 $as_echo_n "checking for uint$2_t... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else eval "$3=no" # Order is important - never check a type that is potentially smaller # than half of the expected target width. for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ 'unsigned long long int' 'unsigned short int' 'unsigned char'; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; test_array [0] = 0; return test_array [0]; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : case $ac_type in #( uint$2_t) : eval "$3=yes" ;; #( *) : eval "$3=\$ac_type" ;; esac fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if eval test \"x\$"$3"\" = x"no"; then : else break fi done fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_find_uintX_t # ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES # --------------------------------------------- # Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR # accordingly. ac_fn_c_check_decl () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack as_decl_name=`echo $2|sed 's/ *(.*//'` as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 $as_echo_n "checking whether $as_decl_name is declared... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { #ifndef $as_decl_name #ifdef __cplusplus (void) $as_decl_use; #else (void) $as_decl_name; #endif #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_decl # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if eval \${$3+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func # ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES # ---------------------------------------------------- # Tries to find if the field MEMBER exists in type AGGR, after including # INCLUDES, setting cache variable VAR accordingly. ac_fn_c_check_member () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 $as_echo_n "checking for $2.$3... " >&6; } if eval \${$4+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int main () { static $2 ac_aggr; if (ac_aggr.$3) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$4=yes" else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $5 int main () { static $2 ac_aggr; if (sizeof ac_aggr.$3) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$4=yes" else eval "$4=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$4 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_member cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by bmake $as_me 20210201, which was +It was created by bmake $as_me 20211020, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo $as_echo "## ---------------- ## ## Cache variables. ## ## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo $as_echo "## ----------------- ## ## Output variables. ## ## ----------------- ##" echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then $as_echo "## ------------------- ## ## File substitutions. ## ## ------------------- ##" echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then $as_echo "## ----------- ## ## confdefs.h. ## ## ----------- ##" echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then # We do not want a PATH search for config.site. case $CONFIG_SITE in #(( -*) ac_site_file1=./$CONFIG_SITE;; */*) ac_site_file1=$CONFIG_SITE;; *) ac_site_file1=./$CONFIG_SITE;; esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" \ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "failed to load site script $ac_site_file See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special files # actually), so we avoid doing that. DJGPP emulates it as a regular file. if test /dev/null != "$cache_file" && test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_config_headers="$ac_config_headers config.h" case "$srcdir" in /*) ;; -*) srcdir=`cd $srcdir && pwd`;; +*) srcdir=`cd $srcdir && 'pwd'`;; esac . $srcdir/VERSION OS=`uname -s` +use_defshell() { + case "$defshell_path$DEFSHELL_INDEX" in + "") ;; + *) return 0;; + esac + case "$1" in + *csh) # we must be desperate + DEFSHELL_INDEX=DEFSHELL_INDEX_CSH;; + *ksh) + DEFSHELL_INDEX=DEFSHELL_INDEX_KSH;; + sh|/bin/sh) + DEFSHELL_INDEX=DEFSHELL_INDEX_SH;; + *) DEFSHELL_INDEX=DEFSHELL_INDEX_CUSTOM + defshell_path=$1 + ;; + esac + case "$1" in + /bin/*) ;; + */*) defshell_path=$1;; + esac +} # Check whether --with-defshell was given. if test "${with_defshell+set}" = set; then : withval=$with_defshell; case "${withval}" in yes) as_fn_error $? "bad value ${withval} given for bmake DEFSHELL" "$LINENO" 5 ;; no) ;; -*) case "$with_defshell" in - sh) DEFSHELL_INDEX=DEFSHELL_INDEX_SH;; # it's the default anyway - ksh) DEFSHELL_INDEX=DEFSHELL_INDEX_KSH;; - csh) DEFSHELL_INDEX=DEFSHELL_INDEX_CSH;; # kidding right? - *) defshell_path=$with_defshell;; # better be sh compatible! - esac - ;; - esac +*) use_defshell $with_defshell;; +esac fi case "$OS" in CYGWIN*|MINGW*) use_makefile=no;; *) use_makefile=yes;; esac # Check whether --with-makefile was given. if test "${with_makefile+set}" = set; then : withval=$with_makefile; case "${withval}" in yes|no) use_makefile=${withval};; *) as_fn_error $? "bad value ${withval} given for makefile" "$LINENO" 5 ;; esac fi use_meta=yes # Check whether --with-meta was given. if test "${with_meta+set}" = set; then : withval=$with_meta; case "${withval}" in yes|no) use_meta=${withval};; *) as_fn_error $? "bad value ${withval} given for meta" "$LINENO" 5 ;; esac fi # Check whether --with-filemon was given. if test "${with_filemon+set}" = set; then : withval=$with_filemon; case "/${withval}" in /no) use_filemon=no;; /*trace) filemon_h=no use_filemon="${withval}";; */filemon.h) filemon_h="${withval}";; */filemon*) filemon_h="${withval}/filemon.h";; *) as_fn_error $? "bad value ${withval} given for filemon" "$LINENO" 5 ;; esac case "$use_filemon,$filemon_h" in ,*.h) use_filemon=dev;; esac else case "$OS" in NetBSD) filemon_h=no use_filemon=ktrace;; *) for d in "/usr/include/dev/filemon" "$prefix/include/dev/filemon" "$srcdir/../../sys/dev/filemon" do for x in "/$OS" "" do filemon_h="$d$x/filemon.h" test -s "$filemon_h" && break done test -s "$filemon_h" && { use_filemon=dev; break; } done ;; esac use_filemon=${use_filemon:-no} case "$use_filemon" in dev) ;; *) filemon_h=no;; esac fi case "$use_meta" in yes) case "$use_filemon" in no) ;; *) echo "Using: filemon_${use_filemon}.c" >&6;; esac ;; esac +case "$OS" in +Minix) CPPFLAGS="${CPPFLAGS} -D_NETBSD_SOURCE" + test -x /usr/pkg/bin/clang && CC=${CC:-clang} + ;; +SCO_SV) # /bin/sh is not usable + ALT_DEF_SHELLS="/bin/lsh /usr/bin/bash /bin/ksh" + CPPFLAGS="${CPPFLAGS} -DFORCE_USE_SHELL" + ;; +esac +echo $ECHO_N "checking whether system has timezone Europe/Berlin... $ECHO_C" >&6 +if test -f /usr/share/zoneinfo/Europe/Berlin; then + echo yes >&6 + # seems a safe bet + UTC_1=Europe/Berlin +else + utcH=`TZ=UTC date +%H 2> /dev/null` + utc_1H=`TZ=UTC-1 date +%H 2> /dev/null` + if test ${utcH-0} -lt ${utc_1H-0}; then + UTC_1=UTC-1 + echo no, using UTC-1 >&6 + else + echo no >&6 + fi +fi +oldPATH=$PATH +for d in /usr/gnu/bin +do + test -d $d || continue + PATH=$PATH:$d +done +export PATH ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi if test -z "$ac_file"; then : { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error 77 "C compiler cannot create executables See \`config.log' for more details" "$LINENO" 5; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files="$ac_clean_files conftest.out" # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } if test "$cross_compiling" != yes; then { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } if { ac_try='./conftest$ac_cv_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details" "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out ac_clean_files=$ac_clean_files_save { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "cannot compute suffix of object files: cannot compile See \`config.log' for more details" "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if ${ac_cv_prog_CPP+:} false; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.i conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.i conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.i conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details" "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" if test "x$ac_cv_header_minix_config_h" = xyes; then : MINIX=yes else MINIX= fi if test "$MINIX" = yes; then $as_echo "#define _POSIX_SOURCE 1" >>confdefs.h $as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h $as_echo "#define _MINIX 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 $as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } if ${ac_cv_safe_to_define___extensions__+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ # define __EXTENSIONS__ 1 $ac_includes_default int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_safe_to_define___extensions__=yes else ac_cv_safe_to_define___extensions__=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 $as_echo "$ac_cv_safe_to_define___extensions__" >&6; } test $ac_cv_safe_to_define___extensions__ = yes && $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h $as_echo "#define _ALL_SOURCE 1" >>confdefs.h $as_echo "#define _GNU_SOURCE 1" >>confdefs.h $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error $? "no acceptable C compiler found in \$PATH See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 fi rm -f conftest.er1 conftest.err $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C99" >&5 $as_echo_n "checking for $CC option to accept ISO C99... " >&6; } if ${ac_cv_prog_cc_c99+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c99=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include #include // Check varargs macros. These examples are taken from C99 6.10.3.5. #define debug(...) fprintf (stderr, __VA_ARGS__) #define showlist(...) puts (#__VA_ARGS__) #define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) static void test_varargs_macros (void) { int x = 1234; int y = 5678; debug ("Flag"); debug ("X = %d\n", x); showlist (The first, second, and third items.); report (x>y, "x is %d but y is %d", x, y); } // Check long long types. #define BIG64 18446744073709551615ull #define BIG32 4294967295ul #define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) #if !BIG_OK your preprocessor is broken; #endif #if BIG_OK #else your preprocessor is broken; #endif static long long int bignum = -9223372036854775807LL; static unsigned long long int ubignum = BIG64; struct incomplete_array { int datasize; double data[]; }; struct named_init { int number; const wchar_t *name; double average; }; typedef const char *ccp; static inline int test_restrict (ccp restrict text) { // See if C++-style comments work. // Iterate through items via the restricted pointer. // Also check for declarations in for loops. for (unsigned int i = 0; *(text+i) != '\0'; ++i) continue; return 0; } // Check varargs and va_copy. static void test_varargs (const char *format, ...) { va_list args; va_start (args, format); va_list args_copy; va_copy (args_copy, args); const char *str; int number; float fnumber; while (*format) { switch (*format++) { case 's': // string str = va_arg (args_copy, const char *); break; case 'd': // int number = va_arg (args_copy, int); break; case 'f': // float fnumber = va_arg (args_copy, double); break; default: break; } } va_end (args_copy); va_end (args); } int main () { // Check bool. _Bool success = false; // Check restrict. if (test_restrict ("String literal") == 0) success = true; char *restrict newvar = "Another string"; // Check varargs. test_varargs ("s, d' f .", "string", 65, 34.234); test_varargs_macros (); // Check flexible array members. struct incomplete_array *ia = malloc (sizeof (struct incomplete_array) + (sizeof (double) * 10)); ia->datasize = 10; for (int i = 0; i < ia->datasize; ++i) ia->data[i] = i * 1.234; // Check named initializers. struct named_init ni = { .number = 34, .name = L"Test wide string", .average = 543.34343, }; ni.number = 58; int dynamic_array[ni.number]; dynamic_array[ni.number - 1] = 543; // work around unused variable warnings return (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == 'x' || dynamic_array[ni.number - 1] != 543); ; return 0; } _ACEOF for ac_arg in '' -std=gnu99 -std=c99 -c99 -AC99 -D_STDC_C99= -qlanglvl=extc99 do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c99=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c99" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c99" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c99" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 $as_echo "$ac_cv_prog_cc_c99" >&6; } ;; esac if test "x$ac_cv_prog_cc_c99" != xno; then : fi ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' if test -x /usr/bin/getconf; then bmake_path_max=`getconf PATH_MAX / 2> /dev/null` # only a numeric response is useful test ${bmake_path_max:-0} -gt 0 2> /dev/null || bmake_path_max= fi bmake_path_max=${bmake_path_max:-1024} if test $bmake_path_max -gt 1024; then # this is all we expect bmake_path_max=1024 fi echo "Using: BMAKE_PATH_MAX=$bmake_path_max" >&6 - +if (type cat) > /dev/null 2>&1; then +: which +which() { + type "$@" | sed 's,[()],,g;s,^[^/][^/]*,,;q' +} +fi +case "$CC" in +/*) ;; +*) + for x in $CC + do + _cc=`which $x` + break + done + if test -x ${_cc:-/dev/null}; then + _cc_dir=`dirname $_cc` + case ":$oldPATH:" in + *:$_cc_dir:*) ;; + *) CC=$_cc_dir/$CC;; + esac + fi + ;; +esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 $as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } if ${ac_cv_header_sys_wait_h+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif int main () { int s; wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_sys_wait_h=yes else ac_cv_header_sys_wait_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 $as_echo "$ac_cv_header_sys_wait_h" >&6; } if test $ac_cv_header_sys_wait_h = yes; then $as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 $as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } if eval \${$as_ac_Header+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include <$ac_hdr> int main () { if ((DIR *) 0) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$as_ac_Header=yes" else eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$as_ac_Header { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if ${ac_cv_search_opendir+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' dir; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_opendir=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_opendir+:} false; then : break fi done if ${ac_cv_search_opendir+:} false; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if ${ac_cv_search_opendir+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' x; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi if ac_fn_c_try_link "$LINENO"; then : ac_cv_search_opendir=$ac_res fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext if ${ac_cv_search_opendir+:} false; then : break fi done if ${ac_cv_search_opendir+:} false; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi for ac_header in sys/param.h do : ac_fn_c_check_header_mongrel "$LINENO" "sys/param.h" "ac_cv_header_sys_param_h" "$ac_includes_default" if test "x$ac_cv_header_sys_param_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SYS_PARAM_H 1 _ACEOF fi done for ac_header in sys/sysctl.h do : ac_fn_c_check_header_compile "$LINENO" "sys/sysctl.h" "ac_cv_header_sys_sysctl_h" "#ifdef HAVE_SYS_PARAM_H # include # endif " if test "x$ac_cv_header_sys_sysctl_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SYS_SYSCTL_H 1 _ACEOF fi done for ac_header in \ ar.h \ err.h \ fcntl.h \ libgen.h \ limits.h \ paths.h \ poll.h \ ranlib.h \ sys/mman.h \ sys/select.h \ sys/socket.h \ sys/time.h \ sys/uio.h \ utime.h \ do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done ac_fn_c_check_header_mongrel "$LINENO" "sys/cdefs.h" "ac_cv_header_sys_cdefs_h" "$ac_includes_default" if test "x$ac_cv_header_sys_cdefs_h" = xyes; then : - echo $ECHO_N "checking whether sys/cdefs.h is compatible... $ECHO_C" >&6 -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#ifdef __RCSID -yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then : - echo yes >&6 -else - echo no >&6; CPPFLAGS="${CPPFLAGS} -I`cd ${srcdir}/missing && pwd` -DNEED_HOST_CDEFS_H" -fi -rm -f conftest* else CPPFLAGS="${CPPFLAGS} -I`cd ${srcdir}/missing && pwd`" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __attribute__" >&5 $as_echo_n "checking for __attribute__... " >&6; } if ${ac_cv___attribute__+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include static void foo(void) __attribute__ ((noreturn)); static void foo(void) { exit(1); } int main(int argc, char **argv) { foo(); } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv___attribute__=yes else ac_cv___attribute__=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi if test "$ac_cv___attribute__" = "yes"; then $as_echo "#define HAVE___ATTRIBUTE__ 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv___attribute__" >&5 $as_echo "$ac_cv___attribute__" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 $as_echo_n "checking whether byte ordering is bigendian... " >&6; } if ${ac_cv_c_bigendian+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_c_bigendian=unknown # See if we're dealing with a universal compiler. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifndef __APPLE_CC__ not a universal capable compiler #endif typedef int dummy; _ACEOF if ac_fn_c_try_compile "$LINENO"; then : # Check for potential -arch flags. It is not universal unless # there are at least two -arch flags with different values. ac_arch= ac_prev= for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do if test -n "$ac_prev"; then case $ac_word in i?86 | x86_64 | ppc | ppc64) if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then ac_arch=$ac_word else ac_cv_c_bigendian=universal break fi ;; esac ac_prev= elif test "x$ac_word" = "x-arch"; then ac_prev=arch fi done fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_c_bigendian = unknown; then # See if sys/param.h defines the BYTE_ORDER macro. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { #if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ && LITTLE_ENDIAN) bogus endian macros #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : # It does; now see whether it defined to BIG_ENDIAN or not. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_bigendian=yes else ac_cv_c_bigendian=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test $ac_cv_c_bigendian = unknown; then # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { #if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) bogus endian macros #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : # It does; now see whether it defined to _BIG_ENDIAN or not. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { #ifndef _BIG_ENDIAN not big endian #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_bigendian=yes else ac_cv_c_bigendian=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi if test $ac_cv_c_bigendian = unknown; then # Compile a test program. if test "$cross_compiling" = yes; then : # Try to guess by grepping values from an object file. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; int use_ascii (int i) { return ascii_mm[i] + ascii_ii[i]; } short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; int use_ebcdic (int i) { return ebcdic_mm[i] + ebcdic_ii[i]; } extern int foo; int main () { return use_ascii (foo) == use_ebcdic (foo); ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then ac_cv_c_bigendian=yes fi if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then if test "$ac_cv_c_bigendian" = unknown; then ac_cv_c_bigendian=no else # finding both strings is unlikely to happen, but who knows? ac_cv_c_bigendian=unknown fi fi fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { /* Are we little or big endian? From Harbison&Steele. */ union { long int l; char c[sizeof (long int)]; } u; u.l = 1; return u.c[sizeof (long int) - 1] == 1; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_c_bigendian=no else ac_cv_c_bigendian=yes fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 $as_echo "$ac_cv_c_bigendian" >&6; } case $ac_cv_c_bigendian in #( yes) $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h ;; #( no) ;; #( universal) $as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h ;; #( *) as_fn_error $? "unknown endianness presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if ${ac_cv_c_const+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __cplusplus /* Ultrix mips cc rejects this sort of thing. */ typedef int charset[2]; const charset cs = { 0, 0 }; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this sort of thing. */ char tx; char *t = &tx; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; } bx; struct s *b = &bx; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then $as_echo "#define const /**/" >>confdefs.h fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 +$as_echo_n "checking for inline... " >&6; } +if ${ac_cv_c_inline+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __cplusplus +typedef int foo_t; +static $ac_kw foo_t static_foo () {return 0; } +$ac_kw foo_t foo () {return 0; } +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_inline=$ac_kw +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + test "$ac_cv_c_inline" != no && break +done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 +$as_echo "$ac_cv_c_inline" >&6; } + +case $ac_cv_c_inline in + inline | yes) ;; + *) + case $ac_cv_c_inline in + no) ac_val=;; + *) ac_val=$ac_cv_c_inline;; + esac + cat >>confdefs.h <<_ACEOF +#ifndef __cplusplus +#define inline $ac_val +#endif +_ACEOF + ;; +esac + +ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" +case $ac_cv_c_int64_t in #( + no|yes) ;; #( + *) + +cat >>confdefs.h <<_ACEOF +#define int64_t $ac_cv_c_int64_t +_ACEOF +;; +esac + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for unsigned long long int" >&5 +$as_echo_n "checking for unsigned long long int... " >&6; } +if ${ac_cv_type_unsigned_long_long_int+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_type_unsigned_long_long_int=yes + if test "x${ac_cv_prog_cc_c99-no}" = xno; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + /* For now, do not test the preprocessor; as of 2007 there are too many + implementations with broken preprocessors. Perhaps this can + be revisited in 2012. In the meantime, code should not expect + #if to work with literals wider than 32 bits. */ + /* Test literals. */ + long long int ll = 9223372036854775807ll; + long long int nll = -9223372036854775807LL; + unsigned long long int ull = 18446744073709551615ULL; + /* Test constant expressions. */ + typedef int a[((-9223372036854775807LL < 0 && 0 < 9223372036854775807ll) + ? 1 : -1)]; + typedef int b[(18446744073709551615ULL <= (unsigned long long int) -1 + ? 1 : -1)]; + int i = 63; +int +main () +{ +/* Test availability of runtime routines for shift and division. */ + long long int llmax = 9223372036854775807ll; + unsigned long long int ullmax = 18446744073709551615ull; + return ((ll << 63) | (ll >> 63) | (ll < i) | (ll > i) + | (llmax / ll) | (llmax % ll) + | (ull << 63) | (ull >> 63) | (ull << i) | (ull >> i) + | (ullmax / ull) | (ullmax % ull)); + ; + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + ac_cv_type_unsigned_long_long_int=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_unsigned_long_long_int" >&5 +$as_echo "$ac_cv_type_unsigned_long_long_int" >&6; } + if test $ac_cv_type_unsigned_long_long_int = yes; then + +$as_echo "#define HAVE_UNSIGNED_LONG_LONG_INT 1" >>confdefs.h + + fi + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for long long int" >&5 +$as_echo_n "checking for long long int... " >&6; } +if ${ac_cv_type_long_long_int+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_type_long_long_int=yes + if test "x${ac_cv_prog_cc_c99-no}" = xno; then + ac_cv_type_long_long_int=$ac_cv_type_unsigned_long_long_int + if test $ac_cv_type_long_long_int = yes; then + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #ifndef LLONG_MAX + # define HALF \ + (1LL << (sizeof (long long int) * CHAR_BIT - 2)) + # define LLONG_MAX (HALF - 1 + HALF) + #endif +int +main () +{ +long long int n = 1; + int i; + for (i = 0; ; i++) + { + long long int m = n << i; + if (m >> i != n) + return 1; + if (LLONG_MAX / 2 < m) + break; + } + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_type_long_long_int=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_long_long_int" >&5 +$as_echo "$ac_cv_type_long_long_int" >&6; } + if test $ac_cv_type_long_long_int = yes; then + +$as_echo "#define HAVE_LONG_LONG_INT 1" >>confdefs.h + + fi + ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default" if test "x$ac_cv_type_mode_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define mode_t int _ACEOF fi ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default" if test "x$ac_cv_type_off_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define off_t long int _ACEOF fi ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" if test "x$ac_cv_type_pid_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define pid_t int _ACEOF fi ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" if test "x$ac_cv_type_size_t" = xyes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t" case $ac_cv_c_uint32_t in #( no|yes) ;; #( *) $as_echo "#define _UINT32_T 1" >>confdefs.h cat >>confdefs.h <<_ACEOF #define uint32_t $ac_cv_c_uint32_t _ACEOF ;; esac ac_fn_c_check_decl "$LINENO" "sys_siglist" "ac_cv_have_decl_sys_siglist" "#include /* NetBSD declares sys_siglist in unistd.h. */ #ifdef HAVE_UNISTD_H # include #endif " if test "x$ac_cv_have_decl_sys_siglist" = xyes; then : ac_have_decl=1 else ac_have_decl=0 fi cat >>confdefs.h <<_ACEOF #define HAVE_DECL_SYS_SIGLIST $ac_have_decl _ACEOF { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 $as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } if ${ac_cv_header_time+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_time=yes else ac_cv_header_time=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 $as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then $as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } if ${ac_cv_struct_tm+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { struct tm tm; int *p = &tm.tm_sec; return !p; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_tm=time.h else ac_cv_struct_tm=sys/time.h fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 $as_echo "$ac_cv_struct_tm" >&6; } if test $ac_cv_struct_tm = sys/time.h; then $as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h fi ac_fn_c_check_type "$LINENO" "sig_atomic_t" "ac_cv_type_sig_atomic_t" " #ifdef HAVE_SYS_TYPES_H #include #endif #include " if test "x$ac_cv_type_sig_atomic_t" = xyes; then : -else - -$as_echo "#define sig_atomic_t int" >>confdefs.h +cat >>confdefs.h <<_ACEOF +#define HAVE_SIG_ATOMIC_T 1 +_ACEOF fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 $as_echo_n "checking return type of signal handlers... " >&6; } if ${ac_cv_type_signal+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include int main () { return *(signal (0, 0)) (0) == 1; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_type_signal=int else ac_cv_type_signal=void fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 $as_echo "$ac_cv_type_signal" >&6; } cat >>confdefs.h <<_ACEOF #define RETSIGTYPE $ac_cv_type_signal _ACEOF for ac_header in vfork.h do : ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" if test "x$ac_cv_header_vfork_h" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_VFORK_H 1 _ACEOF fi done for ac_func in fork vfork do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done if test "x$ac_cv_func_fork" = xyes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 $as_echo_n "checking for working fork... " >&6; } if ${ac_cv_func_fork_works+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_fork_works=cross else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { /* By Ruediger Kuhlmann. */ return fork () < 0; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_fork_works=yes else ac_cv_func_fork_works=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 $as_echo "$ac_cv_func_fork_works" >&6; } else ac_cv_func_fork_works=$ac_cv_func_fork fi if test "x$ac_cv_func_fork_works" = xcross; then case $host in *-*-amigaos* | *-*-msdosdjgpp*) # Override, as these systems have only a dummy fork() stub ac_cv_func_fork_works=no ;; *) ac_cv_func_fork_works=yes ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} fi ac_cv_func_vfork_works=$ac_cv_func_vfork if test "x$ac_cv_func_vfork" = xyes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 $as_echo_n "checking for working vfork... " >&6; } if ${ac_cv_func_vfork_works+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_vfork_works=cross else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Thanks to Paul Eggert for this test. */ $ac_includes_default #include #ifdef HAVE_VFORK_H # include #endif /* On some sparc systems, changes by the child to local and incoming argument registers are propagated back to the parent. The compiler is told about this with #include , but some compilers (e.g. gcc -O) don't grok . Test for this by using a static variable whose address is put into a register that is clobbered by the vfork. */ static void #ifdef __cplusplus sparc_address_test (int arg) # else sparc_address_test (arg) int arg; #endif { static pid_t child; if (!child) { child = vfork (); if (child < 0) { perror ("vfork"); _exit(2); } if (!child) { arg = getpid(); write(-1, "", 0); _exit (arg); } } } int main () { pid_t parent = getpid (); pid_t child; sparc_address_test (0); child = vfork (); if (child == 0) { /* Here is another test for sparc vfork register problems. This test uses lots of local variables, at least as many local variables as main has allocated so far including compiler temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should reuse the register of parent for one of the local variables, since it will think that parent can't possibly be used any more in this routine. Assigning to the local variable will thus munge parent in the parent process. */ pid_t p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); /* Convince the compiler that p..p7 are live; otherwise, it might use the same hardware register for all 8 local variables. */ if (p != p1 || p != p2 || p != p3 || p != p4 || p != p5 || p != p6 || p != p7) _exit(1); /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent from child file descriptors. If the child closes a descriptor before it execs or exits, this munges the parent's descriptor as well. Test for this by closing stdout in the child. */ _exit(close(fileno(stdout)) != 0); } else { int status; struct stat st; while (wait(&status) != child) ; return ( /* Was there some problem with vforking? */ child < 0 /* Did the child fail? (This shouldn't happen.) */ || status /* Did the vfork/compiler bug occur? */ || parent != getpid() /* Did the file descriptor bug occur? */ || fstat(fileno(stdout), &st) != 0 ); } } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_vfork_works=yes else ac_cv_func_vfork_works=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 $as_echo "$ac_cv_func_vfork_works" >&6; } fi; if test "x$ac_cv_func_fork_works" = xcross; then ac_cv_func_vfork_works=$ac_cv_func_vfork { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} fi if test "x$ac_cv_func_vfork_works" = xyes; then $as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h else $as_echo "#define vfork fork" >>confdefs.h fi if test "x$ac_cv_func_fork_works" = xyes; then $as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h fi for ac_func in vprintf do : ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf" if test "x$ac_cv_func_vprintf" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_VPRINTF 1 _ACEOF ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt" if test "x$ac_cv_func__doprnt" = xyes; then : $as_echo "#define HAVE_DOPRNT 1" >>confdefs.h fi fi done { $as_echo "$as_me:${as_lineno-$LINENO}: checking for wait3 that fills in rusage" >&5 $as_echo_n "checking for wait3 that fills in rusage... " >&6; } if ${ac_cv_func_wait3_rusage+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : ac_cv_func_wait3_rusage=no else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default #include #include #include /* HP-UX has wait3 but does not fill in rusage at all. */ int main () { struct rusage r; int i; /* Use a field that we can force nonzero -- voluntary context switches. For systems like NeXT and OSF/1 that don't set it, also use the system CPU time. And page faults (I/O) for Linux. */ r.ru_nvcsw = 0; r.ru_stime.tv_sec = 0; r.ru_stime.tv_usec = 0; r.ru_majflt = r.ru_minflt = 0; switch (fork ()) { case 0: /* Child. */ sleep(1); /* Give up the CPU. */ _exit(0); break; case -1: /* What can we do? */ _exit(0); break; default: /* Parent. */ wait3(&i, 0, &r); /* Avoid "text file busy" from rm on fast HP-UX machines. */ sleep(2); return (r.ru_nvcsw == 0 && r.ru_majflt == 0 && r.ru_minflt == 0 && r.ru_stime.tv_sec == 0 && r.ru_stime.tv_usec == 0); } } _ACEOF if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_wait3_rusage=yes else ac_cv_func_wait3_rusage=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_wait3_rusage" >&5 $as_echo "$ac_cv_func_wait3_rusage" >&6; } if test $ac_cv_func_wait3_rusage = yes; then $as_echo "#define HAVE_WAIT3 1" >>confdefs.h fi for ac_func in \ err \ errx \ getcwd \ getenv \ - getopt \ getwd \ killpg \ mmap \ putenv \ select \ setenv \ setpgid \ + setrlimit \ setsid \ - sigaction \ + sigaddset \ + sigpending \ + sigprocmask \ + sigsetmask \ + sigsuspend \ sigvec \ snprintf \ strerror \ + stresep \ strftime \ strsep \ strtod \ strtol \ + strtoll \ + strtoul \ sysctl \ unsetenv \ vsnprintf \ wait3 \ wait4 \ waitpid \ warn \ warnx \ do : as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done +ac_fn_c_check_func "$LINENO" "getopt" "ac_cv_func_getopt" +if test "x$ac_cv_func_getopt" = xyes; then : + $as_echo "#define HAVE_GETOPT 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" getopt.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS getopt.$ac_objext" + ;; +esac + +fi + ac_fn_c_check_func "$LINENO" "realpath" "ac_cv_func_realpath" if test "x$ac_cv_func_realpath" = xyes; then : $as_echo "#define HAVE_REALPATH 1" >>confdefs.h else case " $LIBOBJS " in *" realpath.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS realpath.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "dirname" "ac_cv_func_dirname" if test "x$ac_cv_func_dirname" = xyes; then : $as_echo "#define HAVE_DIRNAME 1" >>confdefs.h else case " $LIBOBJS " in *" dirname.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS dirname.$ac_objext" ;; esac fi +ac_fn_c_check_func "$LINENO" "sigaction" "ac_cv_func_sigaction" +if test "x$ac_cv_func_sigaction" = xyes; then : + $as_echo "#define HAVE_SIGACTION 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" sigaction.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS sigaction.$ac_objext" + ;; +esac + +fi + ac_fn_c_check_func "$LINENO" "stresep" "ac_cv_func_stresep" if test "x$ac_cv_func_stresep" = xyes; then : $as_echo "#define HAVE_STRESEP 1" >>confdefs.h else case " $LIBOBJS " in *" stresep.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS stresep.$ac_objext" ;; esac fi ac_fn_c_check_func "$LINENO" "strlcpy" "ac_cv_func_strlcpy" if test "x$ac_cv_func_strlcpy" = xyes; then : $as_echo "#define HAVE_STRLCPY 1" >>confdefs.h else case " $LIBOBJS " in *" strlcpy.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS strlcpy.$ac_objext" ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for emalloc in -lutil" >&5 $as_echo_n "checking for emalloc in -lutil... " >&6; } if ${ac_cv_lib_util_emalloc+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lutil $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char emalloc (); int main () { return emalloc (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_util_emalloc=yes else ac_cv_lib_util_emalloc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_emalloc" >&5 $as_echo "$ac_cv_lib_util_emalloc" >&6; } if test "x$ac_cv_lib_util_emalloc" = xyes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for erealloc in -lutil" >&5 $as_echo_n "checking for erealloc in -lutil... " >&6; } if ${ac_cv_lib_util_erealloc+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lutil $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char erealloc (); int main () { return erealloc (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_util_erealloc=yes else ac_cv_lib_util_erealloc=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_erealloc" >&5 $as_echo "$ac_cv_lib_util_erealloc" >&6; } if test "x$ac_cv_lib_util_erealloc" = xyes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for estrdup in -lutil" >&5 $as_echo_n "checking for estrdup in -lutil... " >&6; } if ${ac_cv_lib_util_estrdup+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lutil $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char estrdup (); int main () { return estrdup (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_util_estrdup=yes else ac_cv_lib_util_estrdup=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_estrdup" >&5 $as_echo "$ac_cv_lib_util_estrdup" >&6; } if test "x$ac_cv_lib_util_estrdup" = xyes; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for estrndup in -lutil" >&5 $as_echo_n "checking for estrndup in -lutil... " >&6; } if ${ac_cv_lib_util_estrndup+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lutil $LIBS" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char estrndup (); int main () { return estrndup (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_util_estrndup=yes else ac_cv_lib_util_estrndup=no fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_estrndup" >&5 $as_echo "$ac_cv_lib_util_estrndup" >&6; } if test "x$ac_cv_lib_util_estrndup" = xyes; then : LIBS="$LIBS -lutil" CPPFLAGS="$CPPFLAGS -DUSE_EMALLOC" fi fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5 $as_echo_n "checking whether stat file-mode macros are broken... " >&6; } if ${ac_cv_header_stat_broken+:} false; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if defined S_ISBLK && defined S_IFDIR extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1]; #endif #if defined S_ISBLK && defined S_IFCHR extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1]; #endif #if defined S_ISLNK && defined S_IFREG extern char c3[S_ISLNK (S_IFREG) ? -1 : 1]; #endif #if defined S_ISSOCK && defined S_IFREG extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1]; #endif _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stat_broken=no else ac_cv_header_stat_broken=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5 $as_echo "$ac_cv_header_stat_broken" >&6; } if test $ac_cv_header_stat_broken = yes; then $as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h fi ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default" if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_STAT_ST_RDEV 1 _ACEOF $as_echo "#define HAVE_ST_RDEV 1" >>confdefs.h fi echo "checking if compiler supports __func__" >&6 ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { const char *func = __func__; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else $as_echo "#define __func__ __FUNCTION__" >>confdefs.h fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -echo $ECHO_N "checking if diff -u works... $ECHO_C" >&6 -if diff -u /dev/null /dev/null > /dev/null 2>&1; then - diff_u=-u - echo yes >&6 -else - diff_u= - echo no >&6 +if test -x /usr/gnu/bin/diff; then + diff=/usr/gnu/bin/diff + diff_u=-u +else + diff=${diff:-diff} + echo $ECHO_N "checking if $diff -u works... $ECHO_C" >&6 + if $diff -u /dev/null /dev/null > /dev/null 2>&1; then + diff_u=-u + echo yes >&6 + else + diff_u= + echo no >&6 + fi fi echo "checking for MACHINE & MACHINE_ARCH..." >&6 cat > conftest.$ac_ext < #ifdef MACHINE machine=MACHINE #endif #ifdef MACHINE_ARCH machine_arch=MACHINE_ARCH #endif EOF default_machine=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep machine= | tr -d ' "'` rm -rf conftest* if test "$default_machine"; then eval "$default_machine" fi machine=${machine:-`$srcdir/machine.sh`} machine_arch=${machine_arch:-`$srcdir/machine.sh arch`} echo "defaults: MACHINE=$machine, MACHINE_ARCH=$machine_arch" 1>&6 # Check whether --with-machine was given. if test "${with_machine+set}" = set; then : withval=$with_machine; case "${withval}" in yes) as_fn_error $? "bad value ${withval} given for bmake MACHINE" "$LINENO" 5 ;; no) ;; generic) machine=`$srcdir/machine.sh`;; *) machine=$with_machine;; esac fi force_machine= # Check whether --with-force_machine was given. if test "${with_force_machine+set}" = set; then : withval=$with_force_machine; case "${withval}" in yes) force_machine=FORCE_;; no) ;; *) force_machine=FORCE_; machine=$with_force_machine;; esac fi force_machine_arch= # Check whether --with-force_machine_arch was given. if test "${with_force_machine_arch+set}" = set; then : withval=$with_force_machine_arch; case "${withval}" in yes) force_machine_arch=FORCE_;; no) ;; *) force_machine_arch=FORCE_; machine_arch=$with_force_machine_arch;; esac fi # Check whether --with-machine_arch was given. if test "${with_machine_arch+set}" = set; then : withval=$with_machine_arch; case "${withval}" in yes) as_fn_error $? "bad value ${withval} given for bmake MACHINE_ARCH" "$LINENO" 5 ;; no) ;; *) machine_arch=$with_machine_arch;; esac fi echo "Using: ${force_machine}MACHINE=$machine, ${force_machine_arch}MACHINE_ARCH=$machine_arch" 1>&6 default_sys_path=\${prefix}/share/mk # Check whether --with-default-sys-path was given. if test "${with_default_sys_path+set}" = set; then : withval=$with_default_sys_path; case "${withval}" in yes) as_fn_error $? "bad value ${withval} given for bmake _PATH_DEFSYSPATH" "$LINENO" 5 ;; no) ;; *) default_sys_path="$with_default_sys_path" ;; esac fi # Check whether --with-path-objdirprefix was given. if test "${with_path_objdirprefix+set}" = set; then : withval=$with_path_objdirprefix; case "${withval}" in yes) as_fn_error $? "bad value ${withval} given for bmake _PATH_OBJDIRPREFIX" "$LINENO" 5 ;; no) CPPFLAGS="$CPPFLAGS -DNO_PATH_OBJDIRPREFIX" ;; *) CPPFLAGS="$CPPFLAGS \"-D_PATH_OBJDIRPREFIX=\\\"$with_path-objdir\\\"\"" ;; esac fi # Check whether --enable-pwd-override was given. if test "${enable_pwd_override+set}" = set; then : enableval=$enable_pwd_override; case "${enableval}" in yes) ;; no) CPPFLAGS="$CPPFLAGS -DNO_PWD_OVERRIDE" ;; *) as_fn_error $? "bad value ${enableval} given for pwd-override option" "$LINENO" 5 ;; esac fi # Check whether --enable-check-make-chdir was given. if test "${enable_check_make_chdir+set}" = set; then : enableval=$enable_check_make_chdir; case "${enableval}" in yes) ;; no) CPPFLAGS="$CPPFLAGS -DNO_CHECK_MAKE_CHDIR" ;; *) as_fn_error $? "bad value ${enableval} given for check-make-chdir option" "$LINENO" 5 ;; esac fi # Check whether --with-mksrc was given. if test "${with_mksrc+set}" = set; then : withval=$with_mksrc; case "${withval}" in ""|yes|no) ;; *) test -s $withval/install-mk && mksrc=$withval || as_fn_error $? "bad value ${withval} given for mksrc cannot find install-mk" "$LINENO" 5 ;; esac fi srcdir=`cd $srcdir && pwd` for mksrc in $mksrc $srcdir/mk $srcdir/../mk mk do test -s $mksrc/install-mk || continue mksrc=`cd $mksrc && pwd` break done mksrc=`echo $mksrc | sed "s,$srcdir,\\\${srcdir},"` echo "Using: MKSRC=$mksrc" 1>&6 -if test -x /usr/xpg4/bin/sh; then - defshell_path=${defshell_path:-/usr/xpg4/bin/sh} -fi -if test -n "$defshell_path"; then +for sh in /usr/xpg4/bin/sh $ALT_DEF_SHELLS +do + test -x $sh || continue + use_defshell $sh + break +done +case "$defshell_path$DEFSHELL_INDEX" in +"") ;; +*DEFSHELL_INDEX_CUSTOM) echo "Using: SHELL=$defshell_path" >&6 cat >>confdefs.h <<_ACEOF #define DEFSHELL_CUSTOM "$defshell_path" _ACEOF -fi -if test -n "$DEFSHELL_INDEX"; then + ;; +/*INDEX*) + echo "Using: SHELL=$DEFSHELL_INDEX ($defshell_path)" | sed 's,DEFSHELL_INDEX_,,' >&6 cat >>confdefs.h <<_ACEOF #define DEFSHELL_INDEX $DEFSHELL_INDEX _ACEOF -fi + +cat >>confdefs.h <<_ACEOF +#define DEFSHELL_PATH "$defshell_path" +_ACEOF + + ;; +*) + echo "Using: SHELL=$DEFSHELL_INDEX" | sed 's,DEFSHELL_INDEX_,,' >&6 + +cat >>confdefs.h <<_ACEOF +#define DEFSHELL_INDEX $DEFSHELL_INDEX +_ACEOF + + ;; +esac + + bm_outfiles="Makefile.config unit-tests/Makefile.config make-bootstrap.sh" if test $use_makefile = yes; then bm_outfiles="makefile $bm_outfiles" fi + +here=`'pwd'` +: srcdir=$srcdir +: here= $here +case "$here" in +$srcdir/obj*) # make sure we put unit-tests/Makefile.config in the right place + obj=`basename $here` + mkdir -p $srcdir/unit-tests/$obj + test -d unit-tests || ln -s ../unit-tests/$obj unit-tests + ;; +esac + ac_config_files="$ac_config_files $bm_outfiles" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then if test "x$cache_file" != "x/dev/null"; then { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} if test ! -f "$cache_file" || test -h "$cache_file"; then cat confcache >"$cache_file" else case $cache_file in #( */* | ?:*) mv -f confcache "$cache_file"$$ && mv -f "$cache_file"$$ "$cache_file" ;; #( *) mv -f confcache "$cache_file" ;; esac fi fi else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. as_myself= case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error STATUS ERROR [LINENO LOG_FD] # ---------------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with STATUS, using 1 if that was 0. as_fn_error () { as_status=$1; test $as_status -eq 0 && as_status=1 if test "$4"; then as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 fi $as_echo "$as_me: error: $2" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -pR' fi else as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi # as_fn_executable_p FILE # ----------------------- # Test if FILE is an executable regular file. as_fn_executable_p () { test -f "$1" && test -x "$1" } # as_fn_executable_p as_test_x='test -x' as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by bmake $as_me 20210201, which was +This file was extended by bmake $as_me 20211020, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit --config print configuration, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -bmake config.status 20210201 +bmake config.status 20211020 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; --*=) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg= ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --config | --confi | --conf | --con | --co | --c ) $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; '') as_fn_error $? "missing file argument" ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error $? "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error $? "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "$bm_outfiles") CONFIG_FILES="$CONFIG_FILES $bm_outfiles" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= ac_tmp= trap 'exit_status=$? : "${ac_tmp:=$tmp}" { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove sole $(srcdir), # ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ h s/// s/^/:/ s/[ ]*$/:/ s/:\$(srcdir):/:/g s/:\${srcdir}:/:/g s/:@srcdir@:/:/g s/^:*// s/:*$// x s/\(=[ ]*\).*/\1/ G s/\n// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_tt=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_tt"; then break elif $ac_last_try; then as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$ac_tmp/stdin" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ "$ac_tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined" >&2;} rm -f "$ac_tmp/stdin" case $ac_file in -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" } >"$ac_tmp/config.h" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$ac_tmp/config.h" "$ac_file" \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error $? "could not create -" "$LINENO" 5 fi ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi cat <&6 case "$use_meta" in yes) case "$use_filemon" in no) ;; *) echo "Using: filemon_${use_filemon}.c" >&6;; esac ;; esac dnl dnl Check for OS problems +dnl +dnl Minix 3 at least has bugs in headers where _NETBSD_SOURCE +dnl is needed for compilation +case "$OS" in +Minix) CPPFLAGS="${CPPFLAGS} -D_NETBSD_SOURCE" + test -x /usr/pkg/bin/clang && CC=${CC:-clang} + ;; +SCO_SV) # /bin/sh is not usable + ALT_DEF_SHELLS="/bin/lsh /usr/bin/bash /bin/ksh" + CPPFLAGS="${CPPFLAGS} -DFORCE_USE_SHELL" + ;; +esac +dnl +dnl Not everyone groks TZ=Europe/Berlin +dnl which is used by the localtime tests +echo $ECHO_N "checking whether system has timezone Europe/Berlin... $ECHO_C" >&6 +if test -f /usr/share/zoneinfo/Europe/Berlin; then + echo yes >&6 + # seems a safe bet + UTC_1=Europe/Berlin +else + utcH=`TZ=UTC date +%H 2> /dev/null` + utc_1H=`TZ=UTC-1 date +%H 2> /dev/null` + if test ${utcH-0} -lt ${utc_1H-0}; then + UTC_1=UTC-1 + echo no, using UTC-1 >&6 + else + echo no >&6 + fi +fi +dnl +dnl Add some places to look for compilers +oldPATH=$PATH +for d in /usr/gnu/bin +do + test -d $d || continue + PATH=$PATH:$d +done +export PATH dnl Solaris's signal.h only privides sigset_t etc if one of dnl _EXTENSIONS_ _POSIX_C_SOURCE or _XOPEN_SOURCE are defined. dnl The later two seem to cause more problems than they solve so if we dnl see _EXTENSIONS_ we use it. AC_USE_SYSTEM_EXTENSIONS dnl Checks for programs. AC_PROG_CC AC_PROG_CC_C99 dnl AC_PROG_GCC_TRADITIONAL AC_PROG_INSTALL dnl Executable suffix - normally empty; .exe on os2. AC_SUBST(ac_exe_suffix)dnl dnl dnl Hurd refuses to define PATH_MAX or MAXPATHLEN if test -x /usr/bin/getconf; then bmake_path_max=`getconf PATH_MAX / 2> /dev/null` # only a numeric response is useful test ${bmake_path_max:-0} -gt 0 2> /dev/null || bmake_path_max= fi bmake_path_max=${bmake_path_max:-1024} if test $bmake_path_max -gt 1024; then # this is all we expect bmake_path_max=1024 fi echo "Using: BMAKE_PATH_MAX=$bmake_path_max" >&6 AC_SUBST(bmake_path_max)dnl dnl dnl AC_C_CROSS dnl - +dnl if type does not work which(1) had better! +dnl note we cannot rely on type returning non-zero on failure +if (type cat) > /dev/null 2>&1; then +: which +which() { + type "$@" | sed 's,[[()]],,g;s,^[[^/]][[^/]]*,,;q' +} +fi +dnl if CC is somewhere that was not in PATH we need its full path +dnl watch out for included flags! +case "$CC" in +/*) ;; +*) + for x in $CC + do + _cc=`which $x` + break + done + if test -x ${_cc:-/dev/null}; then + _cc_dir=`dirname $_cc` + case ":$oldPATH:" in + *:$_cc_dir:*) ;; + *) CC=$_cc_dir/$CC;; + esac + fi + ;; +esac dnl Checks for header files. AC_HEADER_SYS_WAIT AC_HEADER_DIRENT dnl Keep this list sorted AC_CHECK_HEADERS(sys/param.h) dnl On BSDi at least we really need sys/param.h for sys/sysctl.h AC_CHECK_HEADERS([sys/sysctl.h], [], [], [#ifdef HAVE_SYS_PARAM_H # include # endif ]) AC_CHECK_HEADERS( \ ar.h \ err.h \ fcntl.h \ libgen.h \ limits.h \ paths.h \ poll.h \ ranlib.h \ sys/mman.h \ sys/select.h \ sys/socket.h \ sys/time.h \ sys/uio.h \ utime.h \ ) dnl Both *BSD and Linux have sys/cdefs.h, most do not. dnl If it is missing, we add -I${srcdir}/missing to CFLAGS -dnl also if sys/cdefs.h does not have __RCSID we need to use ours -dnl but we need to include the host's one too *sigh* -AC_CHECK_HEADER(sys/cdefs.h, -echo $ECHO_N "checking whether sys/cdefs.h is compatible... $ECHO_C" >&6 -AC_EGREP_CPP(yes, -[#include -#ifdef __RCSID -yes -#endif -], -echo yes >&6, -echo no >&6; CPPFLAGS="${CPPFLAGS} -I`cd ${srcdir}/missing && pwd` -DNEED_HOST_CDEFS_H"), +AC_CHECK_HEADER(sys/cdefs.h,, CPPFLAGS="${CPPFLAGS} -I`cd ${srcdir}/missing && pwd`") dnl Checks for typedefs, structures, and compiler characteristics. AC_C___ATTRIBUTE__ AC_C_BIGENDIAN AC_C_CONST +AC_C_INLINE +AC_TYPE_INT64_T +AC_TYPE_LONG_LONG_INT AC_TYPE_MODE_T AC_TYPE_OFF_T AC_TYPE_PID_T AC_TYPE_SIZE_T AC_TYPE_UINT32_T AC_DECL_SYS_SIGLIST AC_HEADER_TIME AC_STRUCT_TM dnl we need sig_atomic_t AH_TEMPLATE([sig_atomic_t],[type that signal handlers can safely frob]) -AC_CHECK_TYPE(sig_atomic_t,,[ -AC_DEFINE([sig_atomic_t],[int],) -],[ +AC_CHECK_TYPES([sig_atomic_t],[],[], +[ #ifdef HAVE_SYS_TYPES_H #include #endif #include ]) dnl Checks for library functions. AC_TYPE_SIGNAL AC_FUNC_VFORK AC_FUNC_VPRINTF AC_FUNC_WAIT3 dnl Keep this list sorted AC_CHECK_FUNCS( \ err \ errx \ getcwd \ getenv \ - getopt \ getwd \ killpg \ mmap \ putenv \ select \ setenv \ setpgid \ + setrlimit \ setsid \ - sigaction \ + sigaddset \ + sigpending \ + sigprocmask \ + sigsetmask \ + sigsuspend \ sigvec \ snprintf \ strerror \ + stresep \ strftime \ strsep \ strtod \ strtol \ + strtoll \ + strtoul \ sysctl \ unsetenv \ vsnprintf \ wait3 \ wait4 \ waitpid \ warn \ warnx \ ) dnl functions which we may need to provide AC_REPLACE_FUNCS( \ + getopt \ realpath \ dirname \ + sigaction \ stresep \ strlcpy \ ) AC_CHECK_LIB([util], [emalloc], [ AC_CHECK_LIB([util], [erealloc], [ AC_CHECK_LIB([util], [estrdup], [ AC_CHECK_LIB([util], [estrndup], [ LIBS="$LIBS -lutil" CPPFLAGS="$CPPFLAGS -DUSE_EMALLOC" ])])])]) dnl dnl Structures dnl AC_HEADER_STAT AC_STRUCT_ST_RDEV dnl echo "checking if compiler supports __func__" >&6 AC_LANG(C) AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[[const char *func = __func__;]])],, AC_DEFINE(__func__, __FUNCTION__, C99 function name)) dnl dnl we want this for unit-tests/Makefile -echo $ECHO_N "checking if diff -u works... $ECHO_C" >&6 -if diff -u /dev/null /dev/null > /dev/null 2>&1; then - diff_u=-u - echo yes >&6 +dnl GNU diff is known to support -u +if test -x /usr/gnu/bin/diff; then + diff=/usr/gnu/bin/diff + diff_u=-u else - diff_u= - echo no >&6 + diff=${diff:-diff} + echo $ECHO_N "checking if $diff -u works... $ECHO_C" >&6 + if $diff -u /dev/null /dev/null > /dev/null 2>&1; then + diff_u=-u + echo yes >&6 + else + diff_u= + echo no >&6 + fi fi dnl dnl AC_* don't quite cut it. dnl echo "checking for MACHINE & MACHINE_ARCH..." >&6 cat > conftest.$ac_ext < #ifdef MACHINE machine=MACHINE #endif #ifdef MACHINE_ARCH machine_arch=MACHINE_ARCH #endif EOF default_machine=`(eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep machine= | tr -d ' "'` rm -rf conftest* if test "$default_machine"; then eval "$default_machine" fi machine=${machine:-`$srcdir/machine.sh`} machine_arch=${machine_arch:-`$srcdir/machine.sh arch`} echo "defaults: MACHINE=$machine, MACHINE_ARCH=$machine_arch" 1>&6 dnl dnl now allow overrides dnl AC_ARG_WITH(machine, [ --with-machine=MACHINE explicitly set MACHINE], [case "${withval}" in yes) AC_MSG_ERROR(bad value ${withval} given for bmake MACHINE) ;; no) ;; generic) machine=`$srcdir/machine.sh`;; *) machine=$with_machine;; esac]) force_machine= AC_ARG_WITH(force_machine, [ --with-force-machine=MACHINE set FORCE_MACHINE], [case "${withval}" in yes) force_machine=FORCE_;; no) ;; *) force_machine=FORCE_; machine=$with_force_machine;; esac]) dnl force_machine_arch= AC_ARG_WITH(force_machine_arch, [ --with-force-machine-arch=MACHINE set FORCE_MACHINE_ARCH], [case "${withval}" in yes) force_machine_arch=FORCE_;; no) ;; *) force_machine_arch=FORCE_; machine_arch=$with_force_machine_arch;; esac]) dnl AC_ARG_WITH(machine_arch, [ --with-machine_arch=MACHINE_ARCH explicitly set MACHINE_ARCH], [case "${withval}" in yes) AC_MSG_ERROR(bad value ${withval} given for bmake MACHINE_ARCH) ;; no) ;; *) machine_arch=$with_machine_arch;; esac]) dnl dnl Tell them what we ended up with dnl echo "Using: ${force_machine}MACHINE=$machine, ${force_machine_arch}MACHINE_ARCH=$machine_arch" 1>&6 dnl dnl Allow folk to control _PATH_DEFSYSPATH dnl default_sys_path=\${prefix}/share/mk AC_ARG_WITH(default-sys-path, [ --with-default-sys-path=PATH:DIR:LIST use an explicit _PATH_DEFSYSPATH MAKESYSPATH is a ':' separated list of directories that bmake will search for system .mk files. _PATH_DEFSYSPATH is its default value.], [case "${withval}" in yes) AC_MSG_ERROR(bad value ${withval} given for bmake _PATH_DEFSYSPATH) ;; no) ;; *) default_sys_path="$with_default_sys_path" ;; esac]) dnl dnl Some folk don't like this one dnl AC_ARG_WITH(path-objdirprefix, [ --with-path-objdirprefix=PATH override _PATH_OBJDIRPREFIX], [case "${withval}" in yes) AC_MSG_ERROR(bad value ${withval} given for bmake _PATH_OBJDIRPREFIX) ;; no) CPPFLAGS="$CPPFLAGS -DNO_PATH_OBJDIRPREFIX" ;; *) CPPFLAGS="$CPPFLAGS \"-D_PATH_OBJDIRPREFIX=\\\"$with_path-objdir\\\"\"" ;; esac]) dnl dnl And this can be handy to do with out. dnl AC_ARG_ENABLE(pwd-override, [ --disable-pwd-override disable $PWD overriding getcwd()], [case "${enableval}" in yes) ;; no) CPPFLAGS="$CPPFLAGS -DNO_PWD_OVERRIDE" ;; *) AC_MSG_ERROR(bad value ${enableval} given for pwd-override option) ;; esac]) dnl dnl Just for grins dnl AC_ARG_ENABLE(check-make-chdir, [ --disable-check-make-chdir disable make trying to guess when it should automatically cd ${.CURDIR}], [case "${enableval}" in yes) ;; no) CPPFLAGS="$CPPFLAGS -DNO_CHECK_MAKE_CHDIR" ;; *) AC_MSG_ERROR(bad value ${enableval} given for check-make-chdir option) ;; esac]) dnl dnl On non-BSD systems, bootstrap won't work without mk dnl AC_ARG_WITH(mksrc, [ --with-mksrc=PATH tell makefile.boot where to find mk src], [case "${withval}" in ""|yes|no) ;; *) test -s $withval/install-mk && mksrc=$withval || AC_MSG_ERROR(bad value ${withval} given for mksrc cannot find install-mk) ;; esac ]) dnl dnl Now make sure we have a value dnl srcdir=`cd $srcdir && pwd` for mksrc in $mksrc $srcdir/mk $srcdir/../mk mk do test -s $mksrc/install-mk || continue mksrc=`cd $mksrc && pwd` break done mksrc=`echo $mksrc | sed "s,$srcdir,\\\${srcdir},"` echo "Using: MKSRC=$mksrc" 1>&6 dnl On some systems we want a different default shell by default -if test -x /usr/xpg4/bin/sh; then - defshell_path=${defshell_path:-/usr/xpg4/bin/sh} -fi -if test -n "$defshell_path"; then +for sh in /usr/xpg4/bin/sh $ALT_DEF_SHELLS +do + test -x $sh || continue + use_defshell $sh + break +done +case "$defshell_path$DEFSHELL_INDEX" in +"") ;; +*DEFSHELL_INDEX_CUSTOM) echo "Using: SHELL=$defshell_path" >&6 AC_DEFINE_UNQUOTED(DEFSHELL_CUSTOM, "$defshell_path", Path of default shell) -fi -if test -n "$DEFSHELL_INDEX"; then - AC_DEFINE_UNQUOTED(DEFSHELL_INDEX, $DEFSHELL_INDEX, Shell spec to use by default) -fi + ;; +/*INDEX*) + echo "Using: SHELL=$DEFSHELL_INDEX ($defshell_path)" | sed 's,DEFSHELL_INDEX_,,' >&6 + AC_DEFINE_UNQUOTED(DEFSHELL_INDEX, $DEFSHELL_INDEX, Shell spec to use by default) +AC_DEFINE_UNQUOTED(DEFSHELL_PATH, "$defshell_path", Path of default shell) + ;; +*) + echo "Using: SHELL=$DEFSHELL_INDEX" | sed 's,DEFSHELL_INDEX_,,' >&6 + AC_DEFINE_UNQUOTED(DEFSHELL_INDEX, $DEFSHELL_INDEX, Shell spec to use by default) + ;; +esac dnl AC_SUBST(machine) AC_SUBST(force_machine) AC_SUBST(machine_arch) AC_SUBST(force_machine_arch) AC_SUBST(mksrc) AC_SUBST(default_sys_path) AC_SUBST(INSTALL) AC_SUBST(GCC) +AC_SUBST(diff) AC_SUBST(diff_u) AC_SUBST(use_meta) AC_SUBST(use_filemon) AC_SUBST(filemon_h) AC_SUBST(_MAKE_VERSION) +AC_SUBST(UTC_1) bm_outfiles="Makefile.config unit-tests/Makefile.config make-bootstrap.sh" if test $use_makefile = yes; then bm_outfiles="makefile $bm_outfiles" fi + +here=`'pwd'` +: srcdir=$srcdir +: here= $here +case "$here" in +$srcdir/obj*) # make sure we put unit-tests/Makefile.config in the right place + obj=`basename $here` + mkdir -p $srcdir/unit-tests/$obj + test -d unit-tests || ln -s ../unit-tests/$obj unit-tests + ;; +esac + AC_OUTPUT($bm_outfiles) cat < #include #include #include #include "make.h" #include "dir.h" #include "job.h" /* "@(#)dir.c 8.2 (Berkeley) 1/2/94" */ -MAKE_RCSID("$NetBSD: dir.c,v 1.272 2021/04/04 10:13:09 rillig Exp $"); +MAKE_RCSID("$NetBSD: dir.c,v 1.275 2021/11/28 21:46:17 rillig Exp $"); /* * A search path is a list of CachedDir structures. A CachedDir has in it the * name of the directory and the names of all the files in the directory. * This is used to cut down on the number of system calls necessary to find * implicit dependents and their like. Since these searches are made before * any actions are taken, we need not worry about the directory changing due * to creation commands. If this hampers the style of some makefiles, they * must be changed. * * All previously-read directories are kept in openDirs, which is checked * first before a directory is opened. * * The need for the caching of whole directories is brought about by the * multi-level transformation code in suff.c, which tends to search for far * more files than regular make does. In the initial implementation, the * amount of time spent performing "stat" calls was truly astronomical. * The problem with caching at the start is, of course, that pmake doesn't * then detect changes to these directories during the course of the make. * Three possibilities suggest themselves: * * 1) just use stat to test for a file's existence. As mentioned above, * this is very inefficient due to the number of checks engendered by * the multi-level transformation code. * * 2) use readdir() and company to search the directories, keeping them * open between checks. I have tried this and while it didn't slow down * the process too much, it could severely affect the amount of * parallelism available as each directory open would take another file * descriptor out of play for handling I/O for another job. Given that * it is only recently (as of 1993 or earlier) that UNIX OS's have taken * to allowing more than 20 or 32 file descriptors for a process, this * doesn't seem acceptable to me. * * 3) record the mtime of the directory in the CachedDir structure and * verify the directory hasn't changed since the contents were cached. * This will catch the creation or deletion of files, but not the * updating of files. However, since it is the creation and deletion * that is the problem, this could be a good thing to do. Unfortunately, * if the directory (say ".") were fairly large and changed fairly * frequently, the constant reloading could seriously degrade * performance. It might be good in such cases to keep track of the * number of reloadings and if the number goes over a (small) limit, * resort to using stat in its place. * * An additional thing to consider is that pmake is used primarily to create * C programs and until recently (as of 1993 or earlier) pcc-based compilers * refused to allow you to specify where the resulting object file should be * placed. This forced all objects to be created in the current directory. * This isn't meant as a full excuse, just an explanation of some of the * reasons for the caching used here. * * One more note: the location of a target's file is only performed on the * downward traversal of the graph and then only for terminal nodes in the * graph. This could be construed as wrong in some cases, but prevents * inadvertent modification of files when the "installed" directory for a * file is provided in the search path. * * Another data structure maintained by this module is an mtime cache used * when the searching of cached directories fails to find a file. In the past, * Dir_FindFile would simply perform an access() call in such a case to * determine if the file could be found using just the name given. When this * hit, however, all that was gained was the knowledge that the file existed. * Given that an access() is essentially a stat() without the copyout() call, * and that the same filesystem overhead would have to be incurred in * Dir_MTime, it made sense to replace the access() with a stat() and record * the mtime in a cache for when Dir_UpdateMTime was actually called. */ /* A cache for the filenames in a directory. */ struct CachedDir { /* * Name of directory, either absolute or relative to the current * directory. The name is not normalized in any way, that is, "." * and "./." are different. * * Not sure what happens when .CURDIR is assigned a new value; see * Parse_Var. */ char *name; /* * The number of SearchPaths that refer to this directory. * Plus the number of global variables that refer to this directory. * References from openDirs do not count though. */ int refCount; /* The number of times a file in this directory has been found. */ int hits; /* The names of the directory entries. */ HashSet files; }; typedef List CachedDirList; typedef ListNode CachedDirListNode; typedef ListNode SearchPathNode; /* A list of cached directories, with fast lookup by directory name. */ typedef struct OpenDirs { CachedDirList list; HashTable /* of CachedDirListNode */ table; } OpenDirs; -typedef enum CachedStatsFlags { - CST_NONE = 0, - CST_LSTAT = 1 << 0, /* call lstat(2) instead of stat(2) */ - CST_UPDATE = 1 << 1 /* ignore existing cached entry */ -} CachedStatsFlags; - SearchPath dirSearchPath = { LST_INIT }; /* main search path */ static OpenDirs openDirs; /* all cached directories */ /* * Variables for gathering statistics on the efficiency of the caching * mechanism. */ static int hits; /* Found in directory cache */ static int misses; /* Sad, but not evil misses */ static int nearmisses; /* Found under search path */ static int bigmisses; /* Sought by itself */ /* The cached contents of ".", the relative current directory. */ static CachedDir *dot = NULL; /* The cached contents of the absolute current directory. */ static CachedDir *cur = NULL; /* A fake path entry indicating we need to look for '.' last. */ static CachedDir *dotLast = NULL; /* * Results of doing a last-resort stat in Dir_FindFile -- if we have to go to * the system to find the file, we might as well have its mtime on record. * * XXX: If this is done way early, there's a chance other rules will have * already updated the file, in which case we'll update it again. Generally, * there won't be two rules to update a single file, so this should be ok, * but... */ static HashTable mtimes; static HashTable lmtimes; /* same as mtimes but for lstat */ static void OpenDirs_Remove(OpenDirs *, const char *); static CachedDir * CachedDir_New(const char *name) { CachedDir *dir = bmake_malloc(sizeof *dir); dir->name = bmake_strdup(name); dir->refCount = 0; dir->hits = 0; HashSet_Init(&dir->files); #ifdef DEBUG_REFCNT DEBUG2(DIR, "CachedDir %p new for \"%s\"\n", dir, dir->name); #endif return dir; } static CachedDir * CachedDir_Ref(CachedDir *dir) { dir->refCount++; #ifdef DEBUG_REFCNT DEBUG3(DIR, "CachedDir %p ++ %d for \"%s\"\n", dir, dir->refCount, dir->name); #endif return dir; } static void CachedDir_Unref(CachedDir *dir) { dir->refCount--; #ifdef DEBUG_REFCNT DEBUG3(DIR, "CachedDir %p -- %d for \"%s\"\n", dir, dir->refCount, dir->name); #endif if (dir->refCount > 0) return; #ifdef DEBUG_REFCNT DEBUG2(DIR, "CachedDir %p free for \"%s\"\n", dir, dir->name); #endif OpenDirs_Remove(&openDirs, dir->name); free(dir->name); HashSet_Done(&dir->files); free(dir); } /* Update the value of the CachedDir variable, updating the reference counts. */ static void CachedDir_Assign(CachedDir **var, CachedDir *dir) { CachedDir *prev; prev = *var; *var = dir; if (dir != NULL) CachedDir_Ref(dir); if (prev != NULL) CachedDir_Unref(prev); } static void OpenDirs_Init(OpenDirs *odirs) { Lst_Init(&odirs->list); HashTable_Init(&odirs->table); } #ifdef CLEANUP static void OpenDirs_Done(OpenDirs *odirs) { CachedDirListNode *ln = odirs->list.first; DEBUG1(DIR, "OpenDirs_Done: %u entries to remove\n", odirs->table.numEntries); while (ln != NULL) { CachedDirListNode *next = ln->next; CachedDir *dir = ln->datum; DEBUG2(DIR, "OpenDirs_Done: refCount %d for \"%s\"\n", dir->refCount, dir->name); CachedDir_Unref(dir); /* removes the dir from odirs->list */ ln = next; } Lst_Done(&odirs->list); HashTable_Done(&odirs->table); } #endif static CachedDir * OpenDirs_Find(OpenDirs *odirs, const char *name) { CachedDirListNode *ln = HashTable_FindValue(&odirs->table, name); return ln != NULL ? ln->datum : NULL; } static void OpenDirs_Add(OpenDirs *odirs, CachedDir *cdir) { if (HashTable_FindEntry(&odirs->table, cdir->name) != NULL) return; Lst_Append(&odirs->list, cdir); HashTable_Set(&odirs->table, cdir->name, odirs->list.last); } static void OpenDirs_Remove(OpenDirs *odirs, const char *name) { HashEntry *he = HashTable_FindEntry(&odirs->table, name); CachedDirListNode *ln; if (he == NULL) return; ln = HashEntry_Get(he); HashTable_DeleteEntry(&odirs->table, he); Lst_Remove(&odirs->list, ln); } /* * Returns 0 and the result of stat(2) or lstat(2) in *out_cst, * or -1 on error. */ static int cached_stats(const char *pathname, struct cached_stat *out_cst, - CachedStatsFlags flags) + bool useLstat, bool forceRefresh) { - HashTable *tbl = flags & CST_LSTAT ? &lmtimes : &mtimes; + HashTable *tbl = useLstat ? &lmtimes : &mtimes; struct stat sys_st; struct cached_stat *cst; int rc; if (pathname == NULL || pathname[0] == '\0') return -1; /* This can happen in meta mode. */ cst = HashTable_FindValue(tbl, pathname); - if (cst != NULL && !(flags & CST_UPDATE)) { + if (cst != NULL && !forceRefresh) { *out_cst = *cst; DEBUG2(DIR, "Using cached time %s for %s\n", Targ_FmtTime(cst->cst_mtime), pathname); return 0; } - rc = (flags & CST_LSTAT ? lstat : stat)(pathname, &sys_st); + rc = (useLstat ? lstat : stat)(pathname, &sys_st); if (rc == -1) return -1; /* don't cache negative lookups */ if (sys_st.st_mtime == 0) sys_st.st_mtime = 1; /* avoid confusion with missing file */ if (cst == NULL) { cst = bmake_malloc(sizeof *cst); HashTable_Set(tbl, pathname, cst); } cst->cst_mtime = sys_st.st_mtime; cst->cst_mode = sys_st.st_mode; *out_cst = *cst; DEBUG2(DIR, " Caching %s for %s\n", Targ_FmtTime(sys_st.st_mtime), pathname); return 0; } int cached_stat(const char *pathname, struct cached_stat *cst) { - return cached_stats(pathname, cst, CST_NONE); + return cached_stats(pathname, cst, false, false); } int cached_lstat(const char *pathname, struct cached_stat *cst) { - return cached_stats(pathname, cst, CST_LSTAT); + return cached_stats(pathname, cst, true, false); } /* Initialize the directories module. */ void Dir_Init(void) { OpenDirs_Init(&openDirs); HashTable_Init(&mtimes); HashTable_Init(&lmtimes); CachedDir_Assign(&dotLast, CachedDir_New(".DOTLAST")); } /* * Called by Dir_InitDir and whenever .CURDIR is assigned to. */ void Dir_InitCur(const char *newCurdir) { CachedDir *dir; if (newCurdir == NULL) return; /* * Our build directory is not the same as our source directory. * Keep this one around too. */ dir = SearchPath_Add(NULL, newCurdir); if (dir == NULL) return; CachedDir_Assign(&cur, dir); } /* * (Re)initialize "dot" (current/object directory) path hash. * Some directories may be cached. */ void Dir_InitDot(void) { CachedDir *dir; dir = SearchPath_Add(NULL, "."); if (dir == NULL) { Error("Cannot open `.' (%s)", strerror(errno)); exit(2); /* Not 1 so -q can distinguish error */ } CachedDir_Assign(&dot, dir); Dir_SetPATH(); /* initialize */ } /* Clean up the directories module. */ void Dir_End(void) { #ifdef CLEANUP CachedDir_Assign(&cur, NULL); CachedDir_Assign(&dot, NULL); CachedDir_Assign(&dotLast, NULL); SearchPath_Clear(&dirSearchPath); OpenDirs_Done(&openDirs); HashTable_Done(&mtimes); HashTable_Done(&lmtimes); #endif } /* * We want ${.PATH} to indicate the order in which we will actually * search, so we rebuild it after any .PATH: target. * This is the simplest way to deal with the effect of .DOTLAST. */ void Dir_SetPATH(void) { CachedDirListNode *ln; bool seenDotLast = false; /* true if we should search '.' last */ Global_Delete(".PATH"); if ((ln = dirSearchPath.dirs.first) != NULL) { CachedDir *dir = ln->datum; if (dir == dotLast) { seenDotLast = true; Global_Append(".PATH", dotLast->name); } } if (!seenDotLast) { if (dot != NULL) Global_Append(".PATH", dot->name); if (cur != NULL) Global_Append(".PATH", cur->name); } for (ln = dirSearchPath.dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; if (dir == dotLast) continue; if (dir == dot && seenDotLast) continue; Global_Append(".PATH", dir->name); } if (seenDotLast) { if (dot != NULL) Global_Append(".PATH", dot->name); if (cur != NULL) Global_Append(".PATH", cur->name); } } /* * See if the given name has any wildcard characters in it and all braces and * brackets are properly balanced. * * XXX: This code is not 100% correct ([^]] fails etc.). I really don't think * that make(1) should be expanding patterns, because then you have to set a * mechanism for escaping the expansion! * * Return true if the word should be expanded, false otherwise. */ bool Dir_HasWildcards(const char *name) { const char *p; bool wild = false; int braces = 0, brackets = 0; for (p = name; *p != '\0'; p++) { switch (*p) { case '{': braces++; wild = true; break; case '}': braces--; break; case '[': brackets++; wild = true; break; case ']': brackets--; break; case '?': case '*': wild = true; break; default: break; } } return wild && brackets == 0 && braces == 0; } /* * See if any files match the pattern and add their names to the 'expansions' * list if they do. * * This is incomplete -- wildcards are only expanded in the final path * component, but not in directories like src/lib*c/file*.c, but it * will do for now (now being 1993 until at least 2020). To expand these, * delegate the work to the shell, using the '!=' variable assignment * operator, the ':sh' variable modifier or the ':!...!' variable modifier, * such as in ${:!echo src/lib*c/file*.c!}. * * Input: * pattern Pattern to look for * dir Directory to search * expansion Place to store the results */ static void DirMatchFiles(const char *pattern, CachedDir *dir, StringList *expansions) { const char *dirName = dir->name; bool isDot = dirName[0] == '.' && dirName[1] == '\0'; HashIter hi; /* * XXX: Iterating over all hash entries is inefficient. If the * pattern is a plain string without any wildcards, a direct lookup * is faster. */ HashIter_InitSet(&hi, &dir->files); while (HashIter_Next(&hi) != NULL) { const char *base = hi.entry->key; if (!Str_Match(base, pattern)) continue; /* * Follow the UNIX convention that dot files are only found * if the pattern begins with a dot. The pattern '.*' does * not match '.' or '..' since these are not included in the * directory cache. * * This means that the pattern '[a-z.]*' does not find * '.file', which is consistent with NetBSD sh, NetBSD ksh, * bash, dash, csh and probably many other shells as well. */ if (base[0] == '.' && pattern[0] != '.') continue; { char *fullName = isDot ? bmake_strdup(base) : str_concat3(dirName, "/", base); Lst_Append(expansions, fullName); } } } /* * Find the next closing brace in the string, taking nested braces into * account. */ static const char * closing_brace(const char *p) { int nest = 0; while (*p != '\0') { if (*p == '}' && nest == 0) break; if (*p == '{') nest++; if (*p == '}') nest--; p++; } return p; } /* * Find the next closing brace or comma in the string, taking nested braces * into account. */ static const char * separator_comma(const char *p) { int nest = 0; while (*p != '\0') { if ((*p == '}' || *p == ',') && nest == 0) break; if (*p == '{') nest++; if (*p == '}') nest--; p++; } return p; } static bool contains_wildcard(const char *p) { for (; *p != '\0'; p++) { switch (*p) { case '*': case '?': case '{': case '[': return true; } } return false; } static char * concat3(const char *a, size_t a_len, const char *b, size_t b_len, const char *c, size_t c_len) { size_t s_len = a_len + b_len + c_len; char *s = bmake_malloc(s_len + 1); memcpy(s, a, a_len); memcpy(s + a_len, b, b_len); memcpy(s + a_len + b_len, c, c_len); s[s_len] = '\0'; return s; } /* * Expand curly braces like the C shell. Brace expansion by itself is purely * textual, the expansions are not looked up in the file system. But if an * expanded word contains wildcard characters, it is expanded further, * matching only the actually existing files. * * Example: "{a{b,c}}" expands to "ab" and "ac". * Example: "{a}" expands to "a". * Example: "{a,*.c}" expands to "a" and all "*.c" files that exist. * * Input: * word Entire word to expand * brace First curly brace in it * path Search path to use * expansions Place to store the expansions */ static void DirExpandCurly(const char *word, const char *brace, SearchPath *path, StringList *expansions) { const char *prefix, *middle, *piece, *middle_end, *suffix; size_t prefix_len, suffix_len; /* Split the word into prefix '{' middle '}' suffix. */ middle = brace + 1; middle_end = closing_brace(middle); if (*middle_end == '\0') { Error("Unterminated {} clause \"%s\"", middle); return; } prefix = word; prefix_len = (size_t)(brace - prefix); suffix = middle_end + 1; suffix_len = strlen(suffix); /* Split the middle into pieces, separated by commas. */ piece = middle; while (piece < middle_end + 1) { const char *piece_end = separator_comma(piece); size_t piece_len = (size_t)(piece_end - piece); char *file = concat3(prefix, prefix_len, piece, piece_len, suffix, suffix_len); if (contains_wildcard(file)) { SearchPath_Expand(path, file, expansions); free(file); } else { Lst_Append(expansions, file); } /* skip over the comma or closing brace */ piece = piece_end + 1; } } /* Expand the word in each of the directories from the path. */ static void DirExpandPath(const char *word, SearchPath *path, StringList *expansions) { SearchPathNode *ln; for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; DirMatchFiles(word, dir, expansions); } } static void PrintExpansions(StringList *expansions) { const char *sep = ""; StringListNode *ln; for (ln = expansions->first; ln != NULL; ln = ln->next) { const char *word = ln->datum; debug_printf("%s%s", sep, word); sep = " "; } debug_printf("\n"); } /* * The wildcard isn't in the first component. * Find all the components up to the one with the wildcard. */ static void SearchPath_ExpandMiddle(SearchPath *path, const char *pattern, const char *wildcardComponent, StringList *expansions) { char *prefix, *dirpath, *end; SearchPath *partPath; prefix = bmake_strsedup(pattern, wildcardComponent + 1); /* * XXX: Check the "the directory is added to the path" part. * It is probably surprising that the directory before a * wildcard gets added to the path. */ /* * XXX: Only the first match of the prefix in the path is * taken, any others are ignored. The expectation may be * that the pattern is expanded in the whole path. */ dirpath = Dir_FindFile(prefix, path); free(prefix); /* * dirpath is null if can't find the leading component * * XXX: Dir_FindFile won't find internal components. i.e. if the * path contains ../Etc/Object and we're looking for Etc, it won't * be found. Ah well. Probably not important. * * XXX: Check whether the above comment is still true. */ if (dirpath == NULL) return; end = &dirpath[strlen(dirpath) - 1]; /* XXX: What about multiple trailing slashes? */ if (*end == '/') *end = '\0'; partPath = SearchPath_New(); (void)SearchPath_Add(partPath, dirpath); DirExpandPath(wildcardComponent + 1, partPath, expansions); SearchPath_Free(partPath); } /* * Expand the given pattern into a list of existing filenames by globbing it, * looking in each directory from the search path. * * Input: * path the directories in which to find the files * pattern the pattern to expand * expansions the list on which to place the results */ void SearchPath_Expand(SearchPath *path, const char *pattern, StringList *expansions) { const char *brace, *slash, *wildcard, *wildcardComponent; assert(path != NULL); assert(expansions != NULL); DEBUG1(DIR, "Expanding \"%s\"... ", pattern); brace = strchr(pattern, '{'); if (brace != NULL) { DirExpandCurly(pattern, brace, path, expansions); goto done; } /* At this point, the pattern does not contain '{'. */ slash = strchr(pattern, '/'); if (slash == NULL) { /* The pattern has no directory component. */ /* First the files in dot. */ DirMatchFiles(pattern, dot, expansions); /* Then the files in every other directory on the path. */ DirExpandPath(pattern, path, expansions); goto done; } /* At this point, the pattern has a directory component. */ /* Find the first wildcard in the pattern. */ for (wildcard = pattern; *wildcard != '\0'; wildcard++) if (*wildcard == '?' || *wildcard == '[' || *wildcard == '*') break; if (*wildcard == '\0') { /* * No directory component and no wildcard at all -- this * should never happen as in such a simple case there is no * need to expand anything. */ DirExpandPath(pattern, path, expansions); goto done; } /* Back up to the start of the component containing the wildcard. */ /* XXX: This handles '///' and '/' differently. */ wildcardComponent = wildcard; while (wildcardComponent > pattern && *wildcardComponent != '/') wildcardComponent--; if (wildcardComponent == pattern) { /* The first component contains the wildcard. */ /* Start the search from the local directory */ DirExpandPath(pattern, path, expansions); } else { SearchPath_ExpandMiddle(path, pattern, wildcardComponent, expansions); } done: if (DEBUG(DIR)) PrintExpansions(expansions); } /* * Find if the file with the given name exists in the given path. * Return the freshly allocated path to the file, or NULL. */ static char * DirLookup(CachedDir *dir, const char *base) { char *file; /* the current filename to check */ DEBUG1(DIR, " %s ...\n", dir->name); if (!HashSet_Contains(&dir->files, base)) return NULL; file = str_concat3(dir->name, "/", base); DEBUG1(DIR, " returning %s\n", file); dir->hits++; hits++; return file; } /* * Find if the file with the given name exists in the given directory. * Return the freshly allocated path to the file, or NULL. */ static char * DirLookupSubdir(CachedDir *dir, const char *name) { struct cached_stat cst; char *file = dir == dot ? bmake_strdup(name) : str_concat3(dir->name, "/", name); DEBUG1(DIR, "checking %s ...\n", file); if (cached_stat(file, &cst) == 0) { nearmisses++; return file; } free(file); return NULL; } /* * Find if the file with the given name exists in the given path. * Return the freshly allocated path to the file, the empty string, or NULL. * Returning the empty string means that the search should be terminated. */ static char * DirLookupAbs(CachedDir *dir, const char *name, const char *cp) { const char *dnp; /* pointer into dir->name */ const char *np; /* pointer into name */ DEBUG1(DIR, " %s ...\n", dir->name); /* * If the file has a leading path component and that component * exactly matches the entire name of the current search * directory, we can attempt another cache lookup. And if we don't * have a hit, we can safely assume the file does not exist at all. */ for (dnp = dir->name, np = name; *dnp != '\0' && *dnp == *np; dnp++, np++) continue; if (*dnp != '\0' || np != cp - 1) return NULL; if (!HashSet_Contains(&dir->files, cp)) { DEBUG0(DIR, " must be here but isn't -- returning\n"); return bmake_strdup(""); /* to terminate the search */ } dir->hits++; hits++; DEBUG1(DIR, " returning %s\n", name); return bmake_strdup(name); } /* * Find the file given on "." or curdir. * Return the freshly allocated path to the file, or NULL. */ static char * DirFindDot(const char *name, const char *base) { if (HashSet_Contains(&dot->files, base)) { DEBUG0(DIR, " in '.'\n"); hits++; dot->hits++; return bmake_strdup(name); } if (cur != NULL && HashSet_Contains(&cur->files, base)) { DEBUG1(DIR, " in ${.CURDIR} = %s\n", cur->name); hits++; cur->hits++; return str_concat3(cur->name, "/", base); } return NULL; } static bool FindFileRelative(SearchPath *path, bool seenDotLast, const char *name, char **out_file) { SearchPathNode *ln; bool checkedDot = false; char *file; DEBUG0(DIR, " Trying subdirectories...\n"); if (!seenDotLast) { if (dot != NULL) { checkedDot = true; if ((file = DirLookupSubdir(dot, name)) != NULL) goto found; } if (cur != NULL && (file = DirLookupSubdir(cur, name)) != NULL) goto found; } for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; if (dir == dotLast) continue; if (dir == dot) { if (checkedDot) continue; checkedDot = true; } if ((file = DirLookupSubdir(dir, name)) != NULL) goto found; } if (seenDotLast) { if (dot != NULL && !checkedDot) { checkedDot = true; if ((file = DirLookupSubdir(dot, name)) != NULL) goto found; } if (cur != NULL && (file = DirLookupSubdir(cur, name)) != NULL) goto found; } if (checkedDot) { /* * Already checked by the given name, since . was in * the path, so no point in proceeding. */ DEBUG0(DIR, " Checked . already, returning NULL\n"); file = NULL; goto found; } return false; found: *out_file = file; return true; } static bool -FindFileAbsolute(SearchPath *path, bool const seenDotLast, - const char *const name, const char *const base, - char **out_file) +FindFileAbsolute(SearchPath *path, bool seenDotLast, + const char *name, const char *base, char **out_file) { char *file; SearchPathNode *ln; /* * For absolute names, compare directory path prefix against * the the directory path of each member on the search path * for an exact match. If we have an exact match on any member * of the search path, use the cached contents of that member * to lookup the final file component. If that lookup fails we * can safely assume that the file does not exist at all. * This is signified by DirLookupAbs() returning an empty * string. */ DEBUG0(DIR, " Trying exact path matches...\n"); if (!seenDotLast && cur != NULL && ((file = DirLookupAbs(cur, name, base)) != NULL)) goto found; for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; if (dir == dotLast) continue; if ((file = DirLookupAbs(dir, name, base)) != NULL) goto found; } if (seenDotLast && cur != NULL && ((file = DirLookupAbs(cur, name, base)) != NULL)) goto found; return false; found: if (file[0] == '\0') { free(file); file = NULL; } *out_file = file; return true; } /* * Find the file with the given name along the given search path. * * If the file is found in a directory that is not on the path * already (either 'name' is absolute or it is a relative path * [ dir1/.../dirn/file ] which exists below one of the directories * already on the search path), its directory is added to the end * of the path, on the assumption that there will be more files in * that directory later on. Sometimes this is true. Sometimes not. * * Input: * name the file to find * path the directories to search, or NULL * * Results: * The freshly allocated path to the file, or NULL. */ char * Dir_FindFile(const char *name, SearchPath *path) { char *file; /* the current filename to check */ bool seenDotLast = false; /* true if we should search dot last */ struct cached_stat cst; /* Buffer for stat, if necessary */ const char *trailing_dot = "."; const char *base = str_basename(name); DEBUG1(DIR, "Searching for %s ...", name); if (path == NULL) { DEBUG0(DIR, "couldn't open path, file not found\n"); misses++; return NULL; } if (path->dirs.first != NULL) { CachedDir *dir = path->dirs.first->datum; if (dir == dotLast) { seenDotLast = true; DEBUG0(DIR, "[dot last]..."); } } DEBUG0(DIR, "\n"); /* * If there's no leading directory components or if the leading * directory component is exactly `./', consult the cached contents * of each of the directories on the search path. */ if (base == name || (base - name == 2 && *name == '.')) { SearchPathNode *ln; /* * We look through all the directories on the path seeking one * which contains the final component of the given name. If * such a file is found, we concatenate the directory name * and the final component and return the resulting string. * If we don't find any such thing, we go on to phase two. * * No matter what, we always look for the file in the current * directory before anywhere else (unless we found the magic * DOTLAST path, in which case we search it last) and we *do * not* add the ./ to it if it exists. * This is so there are no conflicts between what the user * specifies (fish.c) and what pmake finds (./fish.c). */ if (!seenDotLast && (file = DirFindDot(name, base)) != NULL) return file; for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; if (dir == dotLast) continue; if ((file = DirLookup(dir, base)) != NULL) return file; } if (seenDotLast && (file = DirFindDot(name, base)) != NULL) return file; } /* * We didn't find the file on any directory in the search path. * If the name doesn't contain a slash, that means it doesn't exist. * If it *does* contain a slash, however, there is still hope: it * could be in a subdirectory of one of the members of the search * path. (eg. /usr/include and sys/types.h. The above search would * fail to turn up types.h in /usr/include, but it *is* in * /usr/include/sys/types.h). * [ This no longer applies: If we find such a file, we assume there * will be more (what else can we assume?) and add all but the last * component of the resulting name onto the search path (at the * end).] * This phase is only performed if the file is *not* absolute. */ if (base == name) { DEBUG0(DIR, " failed.\n"); misses++; return NULL; } if (*base == '\0') { /* we were given a trailing "/" */ base = trailing_dot; } if (name[0] != '/') { if (FindFileRelative(path, seenDotLast, name, &file)) return file; } else { if (FindFileAbsolute(path, seenDotLast, name, base, &file)) return file; } /* * Didn't find it that way, either. Sigh. Phase 3. Add its directory * onto the search path in any case, just in case, then look for the * thing in the hash table. If we find it, grand. We return a new * copy of the name. Otherwise we sadly return a NULL pointer. Sigh. * Note that if the directory holding the file doesn't exist, this * will do an extra search of the final directory on the path. Unless * something weird happens, this search won't succeed and life will * be groovy. * * Sigh. We cannot add the directory onto the search path because * of this amusing case: * $(INSTALLDIR)/$(FILE): $(FILE) * * $(FILE) exists in $(INSTALLDIR) but not in the current one. * When searching for $(FILE), we will find it in $(INSTALLDIR) * b/c we added it here. This is not good... */ #if 0 { CachedDir *dir; char *prefix; if (base == trailing_dot) { base = strrchr(name, '/'); base++; } prefix = bmake_strsedup(name, base - 1); (void)SearchPath_Add(path, prefix); free(prefix); bigmisses++; if (path->last == NULL) return NULL; dir = path->last->datum; if (HashSet_Contains(&dir->files, base)) return bmake_strdup(name); return NULL; } #else DEBUG1(DIR, " Looking for \"%s\" ...\n", name); bigmisses++; if (cached_stat(name, &cst) == 0) { return bmake_strdup(name); } DEBUG0(DIR, " failed. Returning NULL\n"); return NULL; #endif } /* * Search for a path starting at a given directory and then working our way * up towards the root. * * Input: * here starting directory * search_path the relative path we are looking for * * Results: * The found path, or NULL. */ char * Dir_FindHereOrAbove(const char *here, const char *search_path) { struct cached_stat cst; char *dirbase, *dirbase_end; char *try, *try_end; /* copy out our starting point */ dirbase = bmake_strdup(here); dirbase_end = dirbase + strlen(dirbase); /* loop until we determine a result */ for (;;) { /* try and stat(2) it ... */ try = str_concat3(dirbase, "/", search_path); if (cached_stat(try, &cst) != -1) { /* * success! if we found a file, chop off * the filename so we return a directory. */ if ((cst.cst_mode & S_IFMT) != S_IFDIR) { try_end = try + strlen(try); while (try_end > try && *try_end != '/') try_end--; if (try_end > try) *try_end = '\0'; /* chop! */ } free(dirbase); return try; } free(try); /* * nope, we didn't find it. if we used up dirbase we've * reached the root and failed. */ if (dirbase_end == dirbase) break; /* failed! */ /* * truncate dirbase from the end to move up a dir */ while (dirbase_end > dirbase && *dirbase_end != '/') dirbase_end--; *dirbase_end = '\0'; /* chop! */ } free(dirbase); return NULL; } /* * This is an implied source, and it may have moved, * see if we can find it via the current .PATH */ static char * ResolveMovedDepends(GNode *gn) { char *fullName; const char *base = str_basename(gn->name); if (base == gn->name) return NULL; fullName = Dir_FindFile(base, Suff_FindPath(gn)); if (fullName == NULL) return NULL; /* * Put the found file in gn->path so that we give that to the compiler. */ /* * XXX: Better just reset gn->path to NULL; updating it is already done * by Dir_UpdateMTime. */ gn->path = bmake_strdup(fullName); if (!Job_RunTarget(".STALE", gn->fname)) fprintf(stdout, /* XXX: Why stdout? */ "%s: %s, %d: ignoring stale %s for %s, found %s\n", progname, gn->fname, gn->lineno, makeDependfile, gn->name, fullName); return fullName; } static char * ResolveFullName(GNode *gn) { char *fullName; fullName = gn->path; if (fullName == NULL && !(gn->type & OP_NOPATH)) { fullName = Dir_FindFile(gn->name, Suff_FindPath(gn)); - if (fullName == NULL && gn->flags & FROM_DEPEND && + if (fullName == NULL && gn->flags.fromDepend && !Lst_IsEmpty(&gn->implicitParents)) fullName = ResolveMovedDepends(gn); DEBUG2(DIR, "Found '%s' as '%s'\n", gn->name, fullName != NULL ? fullName : "(not found)"); } if (fullName == NULL) fullName = bmake_strdup(gn->name); /* XXX: Is every piece of memory freed as it should? */ return fullName; } /* * Search gn along dirSearchPath and store its modification time in gn->mtime. * If no file is found, store 0 instead. * * The found file is stored in gn->path, unless the node already had a path. */ void -Dir_UpdateMTime(GNode *gn, bool recheck) +Dir_UpdateMTime(GNode *gn, bool forceRefresh) { char *fullName; struct cached_stat cst; if (gn->type & OP_ARCHV) { Arch_UpdateMTime(gn); return; } if (gn->type & OP_PHONY) { gn->mtime = 0; return; } fullName = ResolveFullName(gn); - if (cached_stats(fullName, &cst, recheck ? CST_UPDATE : CST_NONE) < 0) { + if (cached_stats(fullName, &cst, false, forceRefresh) < 0) { if (gn->type & OP_MEMBER) { if (fullName != gn->path) free(fullName); Arch_UpdateMemberMTime(gn); return; } cst.cst_mtime = 0; } if (fullName != NULL && gn->path == NULL) gn->path = fullName; /* XXX: else free(fullName)? */ gn->mtime = cst.cst_mtime; } /* * Read the directory and add it to the cache in openDirs. * If a path is given, add the directory to that path as well. */ static CachedDir * CacheNewDir(const char *name, SearchPath *path) { CachedDir *dir = NULL; DIR *d; struct dirent *dp; if ((d = opendir(name)) == NULL) { DEBUG1(DIR, "Caching %s ... not found\n", name); return dir; } DEBUG1(DIR, "Caching %s ...\n", name); dir = CachedDir_New(name); while ((dp = readdir(d)) != NULL) { #if defined(sun) && defined(d_ino) /* d_ino is a sunos4 #define for d_fileno */ /* * The sun directory library doesn't check for a 0 inode * (0-inode slots just take up space), so we have to do * it ourselves. */ if (dp->d_fileno == 0) continue; #endif /* sun && d_ino */ (void)HashSet_Add(&dir->files, dp->d_name); } (void)closedir(d); OpenDirs_Add(&openDirs, dir); if (path != NULL) Lst_Append(&path->dirs, CachedDir_Ref(dir)); DEBUG1(DIR, "Caching %s done\n", name); return dir; } /* * Read the list of filenames in the directory and store the result * in openDirs. * * If a path is given, append the directory to that path. * * Input: * path The path to which the directory should be * added, or NULL to only add the directory to openDirs * name The name of the directory to add. * The name is not normalized in any way. * Output: * result If no path is given and the directory exists, the * returned CachedDir has a reference count of 0. It * must either be assigned to a variable using * CachedDir_Assign or be appended to a SearchPath using * Lst_Append and CachedDir_Ref. */ CachedDir * SearchPath_Add(SearchPath *path, const char *name) { if (path != NULL && strcmp(name, ".DOTLAST") == 0) { SearchPathNode *ln; /* XXX: Linear search gets slow with thousands of entries. */ for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *pathDir = ln->datum; if (strcmp(pathDir->name, name) == 0) return pathDir; } Lst_Prepend(&path->dirs, CachedDir_Ref(dotLast)); } if (path != NULL) { /* XXX: Why is OpenDirs only checked if path != NULL? */ CachedDir *dir = OpenDirs_Find(&openDirs, name); if (dir != NULL) { if (Lst_FindDatum(&path->dirs, dir) == NULL) Lst_Append(&path->dirs, CachedDir_Ref(dir)); return dir; } } return CacheNewDir(name, path); } /* * Return a copy of dirSearchPath, incrementing the reference counts for * the contained directories. */ SearchPath * Dir_CopyDirSearchPath(void) { SearchPath *path = SearchPath_New(); SearchPathNode *ln; for (ln = dirSearchPath.dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; Lst_Append(&path->dirs, CachedDir_Ref(dir)); } return path; } /* * Make a string by taking all the directories in the given search path and * preceding them by the given flag. Used by the suffix module to create * variables for compilers based on suffix search paths. * * Input: * flag flag which should precede each directory * path list of directories * * Results: * The string mentioned above. Note that there is no space between the * given flag and each directory. The empty string is returned if things * don't go well. */ char * SearchPath_ToFlags(SearchPath *path, const char *flag) { Buffer buf; SearchPathNode *ln; Buf_Init(&buf); if (path != NULL) { for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; Buf_AddStr(&buf, " "); Buf_AddStr(&buf, flag); Buf_AddStr(&buf, dir->name); } } return Buf_DoneData(&buf); } /* Free the search path and all directories mentioned in it. */ void SearchPath_Free(SearchPath *path) { SearchPathNode *ln; for (ln = path->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; CachedDir_Unref(dir); } Lst_Done(&path->dirs); free(path); } /* * Clear out all elements from the given search path. * The path is set to the empty list but is not destroyed. */ void SearchPath_Clear(SearchPath *path) { while (!Lst_IsEmpty(&path->dirs)) { CachedDir *dir = Lst_Dequeue(&path->dirs); CachedDir_Unref(dir); } } /* * Concatenate two paths, adding the second to the end of the first, * skipping duplicates. */ void SearchPath_AddAll(SearchPath *dst, SearchPath *src) { SearchPathNode *ln; for (ln = src->dirs.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; if (Lst_FindDatum(&dst->dirs, dir) == NULL) Lst_Append(&dst->dirs, CachedDir_Ref(dir)); } } static int percentage(int num, int den) { return den != 0 ? num * 100 / den : 0; } /********** DEBUG INFO **********/ void Dir_PrintDirectories(void) { CachedDirListNode *ln; debug_printf("#*** Directory Cache:\n"); debug_printf( "# Stats: %d hits %d misses %d near misses %d losers (%d%%)\n", hits, misses, nearmisses, bigmisses, percentage(hits, hits + bigmisses + nearmisses)); debug_printf("# refs hits directory\n"); for (ln = openDirs.list.first; ln != NULL; ln = ln->next) { CachedDir *dir = ln->datum; debug_printf("# %4d %4d %s\n", dir->refCount, dir->hits, dir->name); } } void SearchPath_Print(const SearchPath *path) { SearchPathNode *ln; for (ln = path->dirs.first; ln != NULL; ln = ln->next) { const CachedDir *dir = ln->datum; debug_printf("%s ", dir->name); } } diff --git a/contrib/bmake/enum.c b/contrib/bmake/enum.c deleted file mode 100755 index a0ae8569b322..000000000000 --- a/contrib/bmake/enum.c +++ /dev/null @@ -1,80 +0,0 @@ -/* $NetBSD: enum.c,v 1.15 2021/02/02 17:56:31 rillig Exp $ */ - -/* - Copyright (c) 2020 Roland Illig - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS - BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - */ - -#include "make.h" - -MAKE_RCSID("$NetBSD: enum.c,v 1.15 2021/02/02 17:56:31 rillig Exp $"); - -/* - * Convert a bitset into a string representation, showing the names of the - * individual bits. - * - * Optionally, shortcuts for groups of bits can be added. To have an effect, - * they need to be listed before their individual bits. - */ -const char * -Enum_FlagsToString(char *buf, size_t buf_size, - int value, const EnumToStringSpec *spec) -{ - const char *buf_start = buf; - const char *sep = ""; - size_t sep_len = 0; - - for (; spec->es_value != 0; spec++) { - size_t name_len; - - if ((value & spec->es_value) != spec->es_value) - continue; - value &= ~spec->es_value; - - assert(buf_size >= sep_len + 1); - memcpy(buf, sep, sep_len); - buf += sep_len; - buf_size -= sep_len; - - name_len = strlen(spec->es_name); - assert(buf_size >= name_len + 1); - memcpy(buf, spec->es_name, name_len); - buf += name_len; - buf_size -= name_len; - - sep = ENUM__SEP; - sep_len = sizeof ENUM__SEP - 1; - } - - /* If this assertion fails, the listed enum values are incomplete. */ - assert(value == 0); - - if (buf == buf_start) - return "none"; - - assert(buf_size >= 1); - buf[0] = '\0'; - return buf_start; -} diff --git a/contrib/bmake/enum.h b/contrib/bmake/enum.h deleted file mode 100755 index e10fcae045f6..000000000000 --- a/contrib/bmake/enum.h +++ /dev/null @@ -1,179 +0,0 @@ -/* $NetBSD: enum.h,v 1.19 2021/03/15 16:00:05 rillig Exp $ */ - -/* - Copyright (c) 2020 Roland Illig - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - 1. Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS - BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef MAKE_ENUM_H -#define MAKE_ENUM_H - -/* Generate string representations for bitmasks and simple enums. */ - -#include - -typedef struct EnumToStringSpec { - int es_value; - const char *es_name; -} EnumToStringSpec; - - -const char *Enum_FlagsToString(char *, size_t, int, const EnumToStringSpec *); - - -/* For Enum_FlagsToString, the separator between flags. */ -#define ENUM__SEP "|" - -/* - * Generate the string that joins all possible flags, to see how large the - * buffer must be. - */ -#define ENUM__JOIN_STR_1(v1) \ - #v1 -#define ENUM__JOIN_STR_2(v1, v2) \ - ENUM__JOIN_STR_1(v1) ENUM__SEP \ - ENUM__JOIN_STR_1(v2) -#define ENUM__JOIN_STR_4(v1, v2, v3, v4) \ - ENUM__JOIN_STR_2(v1, v2) ENUM__SEP \ - ENUM__JOIN_STR_2(v3, v4) -#define ENUM__JOIN_STR_8(v1, v2, v3, v4, v5, v6, v7, v8) \ - ENUM__JOIN_STR_4(v1, v2, v3, v4) ENUM__SEP \ - ENUM__JOIN_STR_4(v5, v6, v7, v8) -#define ENUM__JOIN_STR_16(v01, v02, v03, v04, v05, v06, v07, v08, \ - v09, v10, v11, v12, v13, v14, v15, v16) \ - ENUM__JOIN_STR_8(v01, v02, v03, v04, v05, v06, v07, v08) ENUM__SEP \ - ENUM__JOIN_STR_8(v09, v10, v11, v12, v13, v14, v15, v16) - -#define ENUM__JOIN_2(part1, part2) \ - part1 ENUM__SEP part2 -#define ENUM__JOIN_3(part1, part2, part3) \ - part1 ENUM__SEP part2 ENUM__SEP part3 -#define ENUM__JOIN_4(part1, part2, part3, part4) \ - part1 ENUM__SEP part2 ENUM__SEP part3 ENUM__SEP part4 -#define ENUM__JOIN_5(part1, part2, part3, part4, part5) \ - part1 ENUM__SEP part2 ENUM__SEP part3 ENUM__SEP part4 ENUM__SEP part5 - -/* List the pairs of enum value and corresponding name. */ -#define ENUM__SPEC_1(v1) \ - { v1, #v1 } -#define ENUM__SPEC_2(v1, v2) \ - ENUM__SPEC_1(v1), \ - ENUM__SPEC_1(v2) -#define ENUM__SPEC_4(v1, v2, v3, v4) \ - ENUM__SPEC_2(v1, v2), \ - ENUM__SPEC_2(v3, v4) -#define ENUM__SPEC_8(v1, v2, v3, v4, v5, v6, v7, v8) \ - ENUM__SPEC_4(v1, v2, v3, v4), \ - ENUM__SPEC_4(v5, v6, v7, v8) -#define ENUM__SPEC_16(v01, v02, v03, v04, v05, v06, v07, v08, \ - v09, v10, v11, v12, v13, v14, v15, v16) \ - ENUM__SPEC_8(v01, v02, v03, v04, v05, v06, v07, v08), \ - ENUM__SPEC_8(v09, v10, v11, v12, v13, v14, v15, v16) - -#define ENUM__SPECS_2(part1, part2) \ - { part1, part2, { 0, "" } } -#define ENUM__SPECS_3(part1, part2, part3) \ - { part1, part2, part3, { 0, "" } } -#define ENUM__SPECS_4(part1, part2, part3, part4) \ - { part1, part2, part3, part4, { 0, "" } } -#define ENUM__SPECS_5(part1, part2, part3, part4, part5) \ - { part1, part2, part3, part4, part5, { 0, "" } } - - -/* Declare the necessary data structures for calling Enum_FlagsToString. */ -#define ENUM__FLAGS_RTTI(typnam, specs, joined) \ - static const EnumToStringSpec typnam ## _ ## ToStringSpecs[] = specs; \ - enum { typnam ## _ ## ToStringSize = sizeof (joined) }; \ - MAKE_INLINE const char *typnam ## _ToString(char *buf, typnam value) \ - { return Enum_FlagsToString(buf, typnam ## _ ## ToStringSize, \ - value, typnam ## _ ## ToStringSpecs); \ - } \ - extern void enum_flags_rtti_dummy(void) - -/* - * Declare the necessary data structures for calling Enum_FlagsToString - * for an enum with 3 flags. - */ -#define ENUM_FLAGS_RTTI_3(typnam, v1, v2, v3) \ - ENUM__FLAGS_RTTI(typnam, \ - ENUM__SPECS_2( \ - ENUM__SPEC_2(v1, v2), \ - ENUM__SPEC_1(v3)), \ - ENUM__JOIN_2( \ - ENUM__JOIN_STR_2(v1, v2), \ - ENUM__JOIN_STR_1(v3))) - -/* - * Declare the necessary data structures for calling Enum_FlagsToString - * for an enum with 6 flags. - */ -#define ENUM_FLAGS_RTTI_6(typnam, v1, v2, v3, v4, v5, v6) \ - ENUM__FLAGS_RTTI(typnam, \ - ENUM__SPECS_2( \ - ENUM__SPEC_4(v1, v2, v3, v4), \ - ENUM__SPEC_2(v5, v6)), \ - ENUM__JOIN_2( \ - ENUM__JOIN_STR_4(v1, v2, v3, v4), \ - ENUM__JOIN_STR_2(v5, v6))) - -/* - * Declare the necessary data structures for calling Enum_FlagsToString - * for an enum with 9 flags. - */ -#define ENUM_FLAGS_RTTI_9(typnam, v1, v2, v3, v4, v5, v6, v7, v8, v9) \ - ENUM__FLAGS_RTTI(typnam, \ - ENUM__SPECS_2( \ - ENUM__SPEC_8(v1, v2, v3, v4, v5, v6, v7, v8), \ - ENUM__SPEC_1(v9)), \ - ENUM__JOIN_2( \ - ENUM__JOIN_STR_8(v1, v2, v3, v4, v5, v6, v7, v8), \ - ENUM__JOIN_STR_1(v9))) - -/* - * Declare the necessary data structures for calling Enum_FlagsToString - * for an enum with 31 flags. - */ -#define ENUM_FLAGS_RTTI_31(typnam, \ - v01, v02, v03, v04, v05, v06, v07, v08, \ - v09, v10, v11, v12, v13, v14, v15, v16, \ - v17, v18, v19, v20, v21, v22, v23, v24, \ - v25, v26, v27, v28, v29, v30, v31) \ - ENUM__FLAGS_RTTI(typnam, \ - ENUM__SPECS_5( \ - ENUM__SPEC_16(v01, v02, v03, v04, v05, v06, v07, v08, \ - v09, v10, v11, v12, v13, v14, v15, v16), \ - ENUM__SPEC_8(v17, v18, v19, v20, v21, v22, v23, v24), \ - ENUM__SPEC_4(v25, v26, v27, v28), \ - ENUM__SPEC_2(v29, v30), \ - ENUM__SPEC_1(v31)), \ - ENUM__JOIN_5( \ - ENUM__JOIN_STR_16(v01, v02, v03, v04, v05, v06, v07, v08, \ - v09, v10, v11, v12, v13, v14, v15, v16), \ - ENUM__JOIN_STR_8(v17, v18, v19, v20, v21, v22, v23, v24), \ - ENUM__JOIN_STR_4(v25, v26, v27, v28), \ - ENUM__JOIN_STR_2(v29, v30), \ - ENUM__JOIN_STR_1(v31))) - -#endif diff --git a/contrib/bmake/filemon/filemon_ktrace.c b/contrib/bmake/filemon/filemon_ktrace.c index 1abef7e78af1..53a85cbe74f7 100644 --- a/contrib/bmake/filemon/filemon_ktrace.c +++ b/contrib/bmake/filemon/filemon_ktrace.c @@ -1,894 +1,893 @@ -/* $NetBSD: filemon_ktrace.c,v 1.14 2021/02/01 21:34:41 rillig Exp $ */ +/* $NetBSD: filemon_ktrace.c,v 1.15 2021/07/31 09:30:17 rillig Exp $ */ /* * Copyright (c) 2019 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Taylor R. Campbell. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #define _KERNTYPES /* register_t */ #include "filemon.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef AT_CWD #define AT_CWD -1 #endif struct filemon; struct filemon_key; struct filemon_state; typedef struct filemon_state *filemon_syscall_t(struct filemon *, const struct filemon_key *, const struct ktr_syscall *); static filemon_syscall_t filemon_sys_chdir; static filemon_syscall_t filemon_sys_execve; static filemon_syscall_t filemon_sys_exit; static filemon_syscall_t filemon_sys_fork; static filemon_syscall_t filemon_sys_link; static filemon_syscall_t filemon_sys_open; static filemon_syscall_t filemon_sys_openat; static filemon_syscall_t filemon_sys_symlink; static filemon_syscall_t filemon_sys_unlink; static filemon_syscall_t filemon_sys_rename; static filemon_syscall_t *const filemon_syscalls[] = { [SYS_chdir] = &filemon_sys_chdir, [SYS_execve] = &filemon_sys_execve, [SYS_exit] = &filemon_sys_exit, [SYS_fork] = &filemon_sys_fork, [SYS_link] = &filemon_sys_link, [SYS_open] = &filemon_sys_open, [SYS_openat] = &filemon_sys_openat, [SYS_symlink] = &filemon_sys_symlink, [SYS_unlink] = &filemon_sys_unlink, [SYS_rename] = &filemon_sys_rename, }; struct filemon { int ktrfd; /* kernel writes ktrace events here */ FILE *in; /* we read ktrace events from here */ FILE *out; /* we write filemon events to here */ rb_tree_t active; pid_t child; /* I/O state machine. */ enum { FILEMON_START = 0, FILEMON_HEADER, FILEMON_PAYLOAD, FILEMON_ERROR, } state; unsigned char *p; size_t resid; /* I/O buffer. */ struct ktr_header hdr; union { struct ktr_syscall syscall; struct ktr_sysret sysret; char namei[PATH_MAX]; unsigned char buf[4096]; } payload; }; struct filemon_state { struct filemon_key { pid_t pid; lwpid_t lid; } key; struct rb_node node; int syscode; void (*show)(struct filemon *, const struct filemon_state *, const struct ktr_sysret *); unsigned i; unsigned npath; char *path[/*npath*/]; }; /*ARGSUSED*/ static int compare_filemon_states(void *cookie, const void *na, const void *nb) { const struct filemon_state *Sa = na; const struct filemon_state *Sb = nb; if (Sa->key.pid < Sb->key.pid) return -1; if (Sa->key.pid > Sb->key.pid) return +1; if (Sa->key.lid < Sb->key.lid) return -1; if (Sa->key.lid > Sb->key.lid) return +1; return 0; } /*ARGSUSED*/ static int compare_filemon_key(void *cookie, const void *n, const void *k) { const struct filemon_state *S = n; const struct filemon_key *key = k; if (S->key.pid < key->pid) return -1; if (S->key.pid > key->pid) return +1; if (S->key.lid < key->lid) return -1; if (S->key.lid > key->lid) return +1; return 0; } static const rb_tree_ops_t filemon_rb_ops = { .rbto_compare_nodes = &compare_filemon_states, .rbto_compare_key = &compare_filemon_key, .rbto_node_offset = offsetof(struct filemon_state, node), .rbto_context = NULL, }; /* * filemon_path() * * Return a pointer to a constant string denoting the `path' of * the filemon. */ const char * filemon_path(void) { return "ktrace"; } /* * filemon_open() * * Allocate a filemon descriptor. Returns NULL and sets errno on * failure. */ struct filemon * filemon_open(void) { struct filemon *F; int ktrpipe[2]; int error; /* Allocate and zero a struct filemon object. */ F = calloc(1, sizeof *F); if (F == NULL) return NULL; /* Create a pipe for ktrace events. */ if (pipe2(ktrpipe, O_CLOEXEC|O_NONBLOCK) == -1) { error = errno; goto fail0; } /* Create a file stream for reading the ktrace events. */ if ((F->in = fdopen(ktrpipe[0], "r")) == NULL) { error = errno; goto fail1; } ktrpipe[0] = -1; /* claimed by fdopen */ /* * Set the fd for writing ktrace events and initialize the * rbtree. The rest can be safely initialized to zero. */ F->ktrfd = ktrpipe[1]; rb_tree_init(&F->active, &filemon_rb_ops); /* Success! */ return F; - (void)fclose(F->in); fail1: (void)close(ktrpipe[0]); (void)close(ktrpipe[1]); fail0: free(F); errno = error; return NULL; } /* * filemon_closefd(F) * * Internal subroutine to try to flush and close the output file. * If F is not open for output, do nothing. Never leaves F open * for output even on failure. Returns 0 on success; sets errno * and return -1 on failure. */ static int filemon_closefd(struct filemon *F) { int error = 0; /* If we're not open, nothing to do. */ if (F->out == NULL) return 0; /* * Flush it, close it, and null it unconditionally, but be * careful to return the earliest error in errno. */ if (fflush(F->out) == EOF && error == 0) error = errno; if (fclose(F->out) == EOF && error == 0) error = errno; F->out = NULL; /* Set errno and return -1 if anything went wrong. */ if (error != 0) { errno = error; return -1; } /* Success! */ return 0; } /* * filemon_setfd(F, fd) * * Cause filemon activity on F to be sent to fd. Claims ownership * of fd; caller should not use fd afterward, and any duplicates * of fd may see their file positions changed. */ int filemon_setfd(struct filemon *F, int fd) { /* * Close an existing output file if done. Fail now if there's * an error closing. */ if ((filemon_closefd(F)) == -1) return -1; assert(F->out == NULL); /* Open a file stream and claim ownership of the fd. */ if ((F->out = fdopen(fd, "a")) == NULL) return -1; /* * Print the opening output. Any failure will be deferred * until closing. For hysterical raisins, we show the parent * pid, not the child pid. */ fprintf(F->out, "# filemon version 4\n"); fprintf(F->out, "# Target pid %jd\n", (intmax_t)getpid()); fprintf(F->out, "V 4\n"); /* Success! */ return 0; } /* * filemon_setpid_parent(F, pid) * * Set the traced pid, from the parent. Never fails. */ void filemon_setpid_parent(struct filemon *F, pid_t pid) { F->child = pid; } /* * filemon_setpid_child(F, pid) * * Set the traced pid, from the child. Returns 0 on success; sets * errno and returns -1 on failure. */ int filemon_setpid_child(const struct filemon *F, pid_t pid) { int ops, trpoints; ops = KTROP_SET|KTRFLAG_DESCEND; trpoints = KTRFACv2; trpoints |= KTRFAC_SYSCALL|KTRFAC_NAMEI|KTRFAC_SYSRET; trpoints |= KTRFAC_INHERIT; if (fktrace(F->ktrfd, ops, trpoints, pid) == -1) return -1; return 0; } /* * filemon_close(F) * * Close F for output if necessary, and free a filemon descriptor. * Returns 0 on success; sets errno and returns -1 on failure, but * frees the filemon descriptor either way; */ int filemon_close(struct filemon *F) { struct filemon_state *S; int error = 0; /* Close for output. */ if (filemon_closefd(F) == -1 && error == 0) error = errno; /* Close the ktrace pipe. */ if (fclose(F->in) == EOF && error == 0) error = errno; if (close(F->ktrfd) == -1 && error == 0) error = errno; /* Free any active records. */ while ((S = RB_TREE_MIN(&F->active)) != NULL) { rb_tree_remove_node(&F->active, S); free(S); } /* Free the filemon descriptor. */ free(F); /* Set errno and return -1 if anything went wrong. */ if (error != 0) { errno = error; return -1; } /* Success! */ return 0; } /* * filemon_readfd(F) * * Returns a file descriptor which will select/poll ready for read * when there are filemon events to be processed by * filemon_process, or -1 if anything has gone wrong. */ int filemon_readfd(const struct filemon *F) { if (F->state == FILEMON_ERROR) return -1; return fileno(F->in); } /* * filemon_dispatch(F) * * Internal subroutine to dispatch a filemon ktrace event. * Silently ignore events that we don't recognize. */ static void filemon_dispatch(struct filemon *F) { const struct filemon_key key = { .pid = F->hdr.ktr_pid, .lid = F->hdr.ktr_lid, }; struct filemon_state *S; switch (F->hdr.ktr_type) { case KTR_SYSCALL: { struct ktr_syscall *call = &F->payload.syscall; struct filemon_state *S1; /* Validate the syscall code. */ if (call->ktr_code < 0 || (size_t)call->ktr_code >= __arraycount(filemon_syscalls) || filemon_syscalls[call->ktr_code] == NULL) break; /* * Invoke the syscall-specific logic to create a new * active state. */ S = (*filemon_syscalls[call->ktr_code])(F, &key, call); if (S == NULL) break; /* * Insert the active state, or ignore it if there * already is one. * * Collisions shouldn't happen because the states are * keyed by , in which syscalls should happen * sequentially in CALL/RET pairs, but let's be * defensive. */ S1 = rb_tree_insert_node(&F->active, S); if (S1 != S) { /* XXX Which one to drop? */ free(S); break; } break; } case KTR_NAMEI: /* Find an active syscall state, or drop it. */ S = rb_tree_find_node(&F->active, &key); if (S == NULL) break; /* Find the position of the next path, or drop it. */ if (S->i >= S->npath) break; /* Record the path. */ S->path[S->i++] = strndup(F->payload.namei, sizeof F->payload.namei); break; case KTR_SYSRET: { struct ktr_sysret *ret = &F->payload.sysret; unsigned i; /* Find and remove an active syscall state, or drop it. */ S = rb_tree_find_node(&F->active, &key); if (S == NULL) break; rb_tree_remove_node(&F->active, S); /* * If the active syscall state matches this return, * invoke the syscall-specific logic to show a filemon * event. */ /* XXX What to do if syscall code doesn't match? */ if (S->i == S->npath && S->syscode == ret->ktr_code) S->show(F, S, ret); /* Free the state now that it is no longer active. */ for (i = 0; i < S->i; i++) free(S->path[i]); free(S); break; } default: /* Ignore all other ktrace events. */ break; } } /* * filemon_process(F) * * Process all pending events after filemon_readfd(F) has * selected/polled ready for read. * * Returns -1 on failure, 0 on end of events, and anything else if * there may be more events. * * XXX What about fairness to other activities in the event loop? * If we stop while there's events buffered in F->in, then select * or poll may not return ready even though there's work queued up * in the buffer of F->in, but if we don't stop then ktrace events * may overwhelm all other activity in the event loop. */ int filemon_process(struct filemon *F) { size_t nread; top: /* If the child has exited, nothing to do. */ /* XXX What if one thread calls exit while another is running? */ if (F->child == 0) return 0; /* If we're waiting for input, read some. */ if (F->resid > 0) { nread = fread(F->p, 1, F->resid, F->in); if (nread == 0) { if (feof(F->in) != 0) return 0; assert(ferror(F->in) != 0); /* * If interrupted or would block, there may be * more events. Otherwise fail. */ if (errno == EAGAIN || errno == EINTR) return 1; F->state = FILEMON_ERROR; F->p = NULL; F->resid = 0; return -1; } assert(nread <= F->resid); F->p += nread; F->resid -= nread; if (F->resid > 0) /* may be more events */ return 1; } /* Process a state transition now that we've read a buffer. */ switch (F->state) { case FILEMON_START: /* just started filemon; read header next */ F->state = FILEMON_HEADER; F->p = (void *)&F->hdr; F->resid = sizeof F->hdr; goto top; case FILEMON_HEADER: /* read header */ /* Sanity-check ktrace header; then read payload. */ if (F->hdr.ktr_len < 0 || (size_t)F->hdr.ktr_len > sizeof F->payload) { F->state = FILEMON_ERROR; F->p = NULL; F->resid = 0; errno = EIO; return -1; } F->state = FILEMON_PAYLOAD; F->p = (void *)&F->payload; F->resid = (size_t)F->hdr.ktr_len; goto top; case FILEMON_PAYLOAD: /* read header and payload */ /* Dispatch ktrace event; then read next header. */ filemon_dispatch(F); F->state = FILEMON_HEADER; F->p = (void *)&F->hdr; F->resid = sizeof F->hdr; goto top; default: /* paranoia */ F->state = FILEMON_ERROR; /*FALLTHROUGH*/ case FILEMON_ERROR: /* persistent error indicator */ F->p = NULL; F->resid = 0; errno = EIO; return -1; } } static struct filemon_state * syscall_enter( const struct filemon_key *key, const struct ktr_syscall *call, unsigned npath, void (*show)(struct filemon *, const struct filemon_state *, const struct ktr_sysret *)) { struct filemon_state *S; unsigned i; S = calloc(1, offsetof(struct filemon_state, path[npath])); if (S == NULL) return NULL; S->key = *key; S->show = show; S->syscode = call->ktr_code; S->i = 0; S->npath = npath; for (i = 0; i < npath; i++) S->path[i] = NULL; /* paranoia */ return S; } static void show_paths(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret, const char *prefix) { unsigned i; /* Caller must ensure all paths have been specified. */ assert(S->i == S->npath); /* * Ignore it if it failed or yielded EJUSTRETURN (-2), or if * we're not producing output. */ if (ret->ktr_error != 0 && ret->ktr_error != -2) return; if (F->out == NULL) return; /* * Print the prefix, pid, and paths -- with the paths quoted if * there's more than one. */ fprintf(F->out, "%s %jd", prefix, (intmax_t)S->key.pid); for (i = 0; i < S->npath; i++) { const char *q = S->npath > 1 ? "'" : ""; fprintf(F->out, " %s%s%s", q, S->path[i], q); } fprintf(F->out, "\n"); } static void show_retval(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret, const char *prefix) { /* * Ignore it if it failed or yielded EJUSTRETURN (-2), or if * we're not producing output. */ if (ret->ktr_error != 0 && ret->ktr_error != -2) return; if (F->out == NULL) return; fprintf(F->out, "%s %jd %jd\n", prefix, (intmax_t)S->key.pid, (intmax_t)ret->ktr_retval); } static void show_chdir(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "C"); } static void show_execve(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "E"); } static void show_fork(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_retval(F, S, ret, "F"); } static void show_link(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "L"); /* XXX same as symlink */ } static void show_open_read(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "R"); } static void show_open_write(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "W"); } static void show_open_readwrite(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "R"); show_paths(F, S, ret, "W"); } static void show_openat_read(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { if (S->path[0][0] != '/') show_paths(F, S, ret, "A"); show_paths(F, S, ret, "R"); } static void show_openat_write(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { if (S->path[0][0] != '/') show_paths(F, S, ret, "A"); show_paths(F, S, ret, "W"); } static void show_openat_readwrite(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { if (S->path[0][0] != '/') show_paths(F, S, ret, "A"); show_paths(F, S, ret, "R"); show_paths(F, S, ret, "W"); } static void show_symlink(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "L"); /* XXX same as link */ } static void show_unlink(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "D"); } static void show_rename(struct filemon *F, const struct filemon_state *S, const struct ktr_sysret *ret) { show_paths(F, S, ret, "M"); } /*ARGSUSED*/ static struct filemon_state * filemon_sys_chdir(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 1, &show_chdir); } /* TODO: monitor fchdir as well */ /*ARGSUSED*/ static struct filemon_state * filemon_sys_execve(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 1, &show_execve); } static struct filemon_state * filemon_sys_exit(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { const register_t *args = (const void *)&call[1]; int status = (int)args[0]; if (F->out != NULL) { fprintf(F->out, "X %jd %d\n", (intmax_t)key->pid, status); if (key->pid == F->child) { fprintf(F->out, "# Bye bye\n"); F->child = 0; } } return NULL; } /*ARGSUSED*/ static struct filemon_state * filemon_sys_fork(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 0, &show_fork); } /*ARGSUSED*/ static struct filemon_state * filemon_sys_link(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 2, &show_link); } /*ARGSUSED*/ static struct filemon_state * filemon_sys_open(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { const register_t *args = (const void *)&call[1]; int flags; if (call->ktr_argsize < 2) return NULL; flags = (int)args[1]; if ((flags & O_RDWR) == O_RDWR) return syscall_enter(key, call, 1, &show_open_readwrite); else if ((flags & O_WRONLY) == O_WRONLY) return syscall_enter(key, call, 1, &show_open_write); else if ((flags & O_RDONLY) == O_RDONLY) return syscall_enter(key, call, 1, &show_open_read); else return NULL; /* XXX Do we care if no read or write? */ } /*ARGSUSED*/ static struct filemon_state * filemon_sys_openat(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { const register_t *args = (const void *)&call[1]; int flags, fd; /* * XXX: In the .meta log, the base directory is missing, which makes * all references to relative pathnames useless. */ if (call->ktr_argsize < 3) return NULL; fd = (int)args[0]; flags = (int)args[2]; if (fd == AT_CWD) { if ((flags & O_RDWR) == O_RDWR) return syscall_enter(key, call, 1, &show_open_readwrite); else if ((flags & O_WRONLY) == O_WRONLY) return syscall_enter(key, call, 1, &show_open_write); else if ((flags & O_RDONLY) == O_RDONLY) return syscall_enter(key, call, 1, &show_open_read); else return NULL; } else { if ((flags & O_RDWR) == O_RDWR) return syscall_enter(key, call, 1, &show_openat_readwrite); else if ((flags & O_WRONLY) == O_WRONLY) return syscall_enter(key, call, 1, &show_openat_write); else if ((flags & O_RDONLY) == O_RDONLY) return syscall_enter(key, call, 1, &show_openat_read); else return NULL; } } /* TODO: monitor the other *at syscalls as well, not only openat. */ /*ARGSUSED*/ static struct filemon_state * filemon_sys_symlink(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 2, &show_symlink); } /*ARGSUSED*/ static struct filemon_state * filemon_sys_unlink(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 1, &show_unlink); } /*ARGSUSED*/ static struct filemon_state * filemon_sys_rename(struct filemon *F, const struct filemon_key *key, const struct ktr_syscall *call) { return syscall_enter(key, call, 2, &show_rename); } diff --git a/contrib/bmake/for.c b/contrib/bmake/for.c index 615efb7634c9..013b0f21d841 100644 --- a/contrib/bmake/for.c +++ b/contrib/bmake/for.c @@ -1,517 +1,521 @@ -/* $NetBSD: for.c,v 1.142 2021/04/03 11:08:40 rillig Exp $ */ +/* $NetBSD: for.c,v 1.150 2021/12/12 15:44:41 rillig Exp $ */ /* * Copyright (c) 1992, The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Handling of .for/.endfor loops in a makefile. * * For loops have the form: * * .for in * # the body * .endfor * * When a .for line is parsed, the following lines are copied to the body of * the .for loop, until the corresponding .endfor line is reached. In this * phase, the body is not yet evaluated. This also applies to any nested * .for loops. * * After reaching the .endfor, the values from the .for line are grouped * according to the number of variables. For each such group, the unexpanded - * body is scanned for variable expressions, and those that match the variable - * names are replaced with expressions of the form ${:U...} or $(:U...). - * After that, the body is treated like a file from an .include directive. + * body is scanned for variable expressions, and those that match the + * variable names are replaced with expressions of the form ${:U...}. After + * that, the body is treated like a file from an .include directive. * * Interface: * For_Eval Evaluate the loop in the passed line. * * For_Run Run accumulated loop */ #include "make.h" /* "@(#)for.c 8.1 (Berkeley) 6/6/93" */ -MAKE_RCSID("$NetBSD: for.c,v 1.142 2021/04/03 11:08:40 rillig Exp $"); +MAKE_RCSID("$NetBSD: for.c,v 1.150 2021/12/12 15:44:41 rillig Exp $"); /* One of the variables to the left of the "in" in a .for loop. */ typedef struct ForVar { char *name; size_t nameLen; } ForVar; typedef struct ForLoop { Buffer body; /* Unexpanded body of the loop */ Vector /* of ForVar */ vars; /* Iteration variables */ - Words items; /* Substitution items */ + SubstringWords items; /* Substitution items */ Buffer curBody; /* Expanded body of the current iteration */ - /* Is any of the names 1 character long? If so, when the variable values - * are substituted, the parser must handle $V expressions as well, not - * only ${V} and $(V). */ - bool short_var; - unsigned int sub_next; /* Where to continue iterating */ + unsigned int nextItem; /* Where to continue iterating */ } ForLoop; -static ForLoop *accumFor; /* Loop being accumulated */ +static ForLoop *accumFor; /* Loop being accumulated */ static int forLevel = 0; /* Nesting level */ static ForLoop * ForLoop_New(void) { ForLoop *f = bmake_malloc(sizeof *f); Buf_Init(&f->body); Vector_Init(&f->vars, sizeof(ForVar)); - f->items.words = NULL; - f->items.freeIt = NULL; + SubstringWords_Init(&f->items); Buf_Init(&f->curBody); - f->short_var = false; - f->sub_next = 0; + f->nextItem = 0; return f; } static void ForLoop_Free(ForLoop *f) { Buf_Done(&f->body); while (f->vars.len > 0) { ForVar *var = Vector_Pop(&f->vars); free(var->name); } Vector_Done(&f->vars); - Words_Free(f->items); + SubstringWords_Free(f->items); Buf_Done(&f->curBody); free(f); } static void ForLoop_AddVar(ForLoop *f, const char *name, size_t len) { ForVar *var = Vector_Push(&f->vars); var->name = bmake_strldup(name, len); var->nameLen = len; } static bool ForLoop_ParseVarnames(ForLoop *f, const char **pp) { const char *p = *pp; for (;;) { size_t len; cpp_skip_whitespace(&p); if (*p == '\0') { Parse_Error(PARSE_FATAL, "missing `in' in for"); return false; } /* * XXX: This allows arbitrary variable names; * see directive-for.mk. */ for (len = 1; p[len] != '\0' && !ch_isspace(p[len]); len++) continue; if (len == 2 && p[0] == 'i' && p[1] == 'n') { p += 2; break; } - if (len == 1) - f->short_var = true; ForLoop_AddVar(f, p, len); p += len; } if (f->vars.len == 0) { Parse_Error(PARSE_FATAL, "no iteration variables in for"); return false; } *pp = p; return true; } static bool ForLoop_ParseItems(ForLoop *f, const char *p) { char *items; cpp_skip_whitespace(&p); if (Var_Subst(p, SCOPE_GLOBAL, VARE_WANTRES, &items) != VPR_OK) { Parse_Error(PARSE_FATAL, "Error in .for loop items"); return false; } - f->items = Str_Words(items, false); + f->items = Substring_Words(items, false); free(items); - if (f->items.len == 1 && f->items.words[0][0] == '\0') + if (f->items.len == 1 && Substring_IsEmpty(f->items.words[0])) f->items.len = 0; /* .for var in ${:U} */ if (f->items.len != 0 && f->items.len % f->vars.len != 0) { Parse_Error(PARSE_FATAL, "Wrong number of words (%u) in .for " "substitution list with %u variables", (unsigned)f->items.len, (unsigned)f->vars.len); return false; } return true; } static bool IsFor(const char *p) { return p[0] == 'f' && p[1] == 'o' && p[2] == 'r' && ch_isspace(p[3]); } static bool IsEndfor(const char *p) { return p[0] == 'e' && strncmp(p, "endfor", 6) == 0 && (p[6] == '\0' || ch_isspace(p[6])); } /* * Evaluate the for loop in the passed line. The line looks like this: * .for in * * Input: * line Line to parse * * Results: * 0: Not a .for statement, parse the line * 1: We found a for loop * -1: A .for statement with a bad syntax error, discard. */ int For_Eval(const char *line) { ForLoop *f; const char *p; p = line + 1; /* skip the '.' */ cpp_skip_whitespace(&p); if (!IsFor(p)) { if (IsEndfor(p)) { Parse_Error(PARSE_FATAL, "for-less endfor"); return -1; } return 0; } p += 3; f = ForLoop_New(); if (!ForLoop_ParseVarnames(f, &p)) { ForLoop_Free(f); return -1; } if (!ForLoop_ParseItems(f, p)) { /* Continue parsing the .for loop, but don't iterate. */ f->items.len = 0; } accumFor = f; forLevel = 1; return 1; } /* * Add another line to the .for loop that is being built up. * Returns false when the matching .endfor is reached. */ bool For_Accum(const char *line) { const char *p = line; if (*p == '.') { p++; cpp_skip_whitespace(&p); if (IsEndfor(p)) { DEBUG1(FOR, "For: end for %d\n", forLevel); if (--forLevel <= 0) return false; } else if (IsFor(p)) { forLevel++; DEBUG1(FOR, "For: new loop %d\n", forLevel); } } Buf_AddStr(&accumFor->body, line); Buf_AddByte(&accumFor->body, '\n'); return true; } static size_t -for_var_len(const char *var) +ExprLen(const char *s, const char *e) { - char ch, var_start, var_end; + char expr_open, expr_close; int depth; - size_t len; + const char *p; - var_start = *var; - if (var_start == '\0') - /* just escape the $ */ - return 0; + if (s == e) + return 0; /* just escape the '$' */ - if (var_start == '(') - var_end = ')'; - else if (var_start == '{') - var_end = '}'; + expr_open = s[0]; + if (expr_open == '(') + expr_close = ')'; + else if (expr_open == '{') + expr_close = '}'; else return 1; /* Single char variable */ depth = 1; - for (len = 1; (ch = var[len++]) != '\0';) { - if (ch == var_start) + for (p = s + 1; p != e; p++) { + if (*p == expr_open) depth++; - else if (ch == var_end && --depth == 0) - return len; + else if (*p == expr_close && --depth == 0) + return (size_t)(p + 1 - s); } - /* Variable end not found, escape the $ */ + /* Expression end not found, escape the $ */ return 0; } /* * The .for loop substitutes the items as ${:U...}, which means * that characters that break this syntax must be backslash-escaped. */ static bool -NeedsEscapes(const char *value, char endc) +NeedsEscapes(Substring value, char endc) { const char *p; - for (p = value; *p != '\0'; p++) { - if (*p == ':' || *p == '$' || *p == '\\' || *p == endc) + for (p = value.start; p != value.end; p++) { + if (*p == ':' || *p == '$' || *p == '\\' || *p == endc || + *p == '\n') return true; } return false; } /* * While expanding the body of a .for loop, write the item in the ${:U...} * expression, escaping characters as needed. * * The result is later unescaped by ApplyModifier_Defined. */ static void -Buf_AddEscaped(Buffer *cmds, const char *item, char endc) +Buf_AddEscaped(Buffer *cmds, Substring item, char endc) { + const char *p; char ch; if (!NeedsEscapes(item, endc)) { - Buf_AddStr(cmds, item); + Buf_AddBytesBetween(cmds, item.start, item.end); return; } /* Escape ':', '$', '\\' and 'endc' - these will be removed later by * :U processing, see ApplyModifier_Defined. */ - while ((ch = *item++) != '\0') { + for (p = item.start; p != item.end; p++) { + ch = *p; if (ch == '$') { - size_t len = for_var_len(item); + size_t len = ExprLen(p + 1, item.end); if (len != 0) { - Buf_AddBytes(cmds, item - 1, len + 1); - item += len; + /* + * XXX: Should a '\' be added here? + * See directive-for-escape.mk, ExprLen. + */ + Buf_AddBytes(cmds, p, 1 + len); + p += len; continue; } Buf_AddByte(cmds, '\\'); } else if (ch == ':' || ch == '\\' || ch == endc) Buf_AddByte(cmds, '\\'); + else if (ch == '\n') { + Parse_Error(PARSE_FATAL, "newline in .for value"); + ch = ' '; /* prevent newline injection */ + } Buf_AddByte(cmds, ch); } } /* - * While expanding the body of a .for loop, replace the variable name of an + * When expanding the body of a .for loop, replace the variable name of an * expression like ${i} or ${i:...} or $(i) or $(i:...) with ":Uvalue". */ static void ForLoop_SubstVarLong(ForLoop *f, const char **pp, const char *bodyEnd, char endc, const char **inout_mark) { size_t i; const char *p = *pp; for (i = 0; i < f->vars.len; i++) { - ForVar *forVar = Vector_Get(&f->vars, i); - char *varname = forVar->name; + const ForVar *forVar = Vector_Get(&f->vars, i); + const char *varname = forVar->name; size_t varnameLen = forVar->nameLen; if (varnameLen >= (size_t)(bodyEnd - p)) continue; if (memcmp(p, varname, varnameLen) != 0) continue; /* XXX: why test for backslash here? */ if (p[varnameLen] != ':' && p[varnameLen] != endc && p[varnameLen] != '\\') continue; /* * Found a variable match. Skip over the variable name and * instead add ':U' to the current body. */ Buf_AddBytesBetween(&f->curBody, *inout_mark, p); Buf_AddStr(&f->curBody, ":U"); Buf_AddEscaped(&f->curBody, - f->items.words[f->sub_next + i], endc); + f->items.words[f->nextItem + i], endc); p += varnameLen; *inout_mark = p; *pp = p; return; } } /* - * While expanding the body of a .for loop, replace single-character + * When expanding the body of a .for loop, replace single-character * variable expressions like $i with their ${:U...} expansion. */ static void ForLoop_SubstVarShort(ForLoop *f, const char *p, const char **inout_mark) { const char ch = *p; - ForVar *vars; + const ForVar *vars; size_t i; /* Skip $$ and stupid ones. */ - if (!f->short_var || strchr("}):$", ch) != NULL) + if (ch == '}' || ch == ')' || ch == ':' || ch == '$') return; vars = Vector_Get(&f->vars, 0); for (i = 0; i < f->vars.len; i++) { const char *varname = vars[i].name; if (varname[0] == ch && varname[1] == '\0') goto found; } return; found: + Buf_AddBytesBetween(&f->curBody, *inout_mark, p); + *inout_mark = p + 1; + /* Replace $ with ${:U} */ - Buf_AddBytesBetween(&f->curBody, *inout_mark, p), *inout_mark = p + 1; Buf_AddStr(&f->curBody, "{:U"); - Buf_AddEscaped(&f->curBody, f->items.words[f->sub_next + i], '}'); + Buf_AddEscaped(&f->curBody, f->items.words[f->nextItem + i], '}'); Buf_AddByte(&f->curBody, '}'); } /* * Compute the body for the current iteration by copying the unexpanded body, * replacing the expressions for the iteration variables on the way. * * Using variable expressions ensures that the .for loop can't generate * syntax, and that the later parsing will still see a variable. * This code assumes that the variable with the empty name will never be * defined, see unit-tests/varname-empty.mk for more details. * * The detection of substitutions of the loop control variables is naive. - * Many of the modifiers use '\' to escape '$' (not '$'), so it is possible - * to contrive a makefile where an unwanted substitution happens. + * Many of the modifiers use '\$' instead of '$$' to escape '$', so it is + * possible to contrive a makefile where an unwanted substitution happens. */ static void ForLoop_SubstBody(ForLoop *f) { const char *p, *bodyEnd; - const char *mark; /* where the last replacement left off */ + const char *mark; /* where the last substitution left off */ Buf_Empty(&f->curBody); mark = f->body.data; bodyEnd = f->body.data + f->body.len; for (p = mark; (p = strchr(p, '$')) != NULL;) { if (p[1] == '{' || p[1] == '(') { + char endc = p[1] == '{' ? '}' : ')'; p += 2; - ForLoop_SubstVarLong(f, &p, bodyEnd, - p[-1] == '{' ? '}' : ')', &mark); + ForLoop_SubstVarLong(f, &p, bodyEnd, endc, &mark); } else if (p[1] != '\0') { ForLoop_SubstVarShort(f, p + 1, &mark); p += 2; } else break; } Buf_AddBytesBetween(&f->curBody, mark, bodyEnd); } /* * Compute the body for the current iteration by copying the unexpanded body, * replacing the expressions for the iteration variables on the way. */ static char * ForReadMore(void *v_arg, size_t *out_len) { ForLoop *f = v_arg; - if (f->sub_next == f->items.len) { + if (f->nextItem == f->items.len) { /* No more iterations */ ForLoop_Free(f); return NULL; } ForLoop_SubstBody(f); DEBUG1(FOR, "For: loop body:\n%s", f->curBody.data); - f->sub_next += (unsigned int)f->vars.len; + f->nextItem += (unsigned int)f->vars.len; *out_len = f->curBody.len; return f->curBody.data; } /* Run the .for loop, imitating the actions of an include file. */ void For_Run(int lineno) { ForLoop *f = accumFor; accumFor = NULL; if (f->items.len == 0) { /* * Nothing to expand - possibly due to an earlier syntax * error. */ ForLoop_Free(f); return; } - Parse_SetInput(NULL, lineno, -1, ForReadMore, f); + Parse_PushInput(NULL, lineno, -1, ForReadMore, f); } diff --git a/contrib/bmake/hash.c b/contrib/bmake/hash.c index 8b503ac31fb5..ec0079fa4ba4 100644 --- a/contrib/bmake/hash.c +++ b/contrib/bmake/hash.c @@ -1,374 +1,365 @@ -/* $NetBSD: hash.c,v 1.64 2021/04/11 12:46:54 rillig Exp $ */ +/* $NetBSD: hash.c,v 1.66 2021/12/07 21:58:01 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* Hash tables with string keys. */ #include "make.h" /* "@(#)hash.c 8.1 (Berkeley) 6/6/93" */ -MAKE_RCSID("$NetBSD: hash.c,v 1.64 2021/04/11 12:46:54 rillig Exp $"); +MAKE_RCSID("$NetBSD: hash.c,v 1.66 2021/12/07 21:58:01 rillig Exp $"); /* * The ratio of # entries to # buckets at which we rebuild the table to * make it larger. */ #define rebuildLimit 3 /* This hash function matches Gosling's Emacs and java.lang.String. */ static unsigned int Hash_String(const char *key, size_t *out_keylen) { unsigned int h; const char *p; h = 0; for (p = key; *p != '\0'; p++) h = 31 * h + (unsigned char)*p; if (out_keylen != NULL) *out_keylen = (size_t)(p - key); return h; } /* This hash function matches Gosling's Emacs and java.lang.String. */ unsigned int Hash_Substring(Substring key) { unsigned int h; const char *p; h = 0; for (p = key.start; p != key.end; p++) h = 31 * h + (unsigned char)*p; return h; } static HashEntry * HashTable_Find(HashTable *t, unsigned int h, const char *key) { HashEntry *e; unsigned int chainlen = 0; #ifdef DEBUG_HASH_LOOKUP DEBUG4(HASH, "%s: %p h=%08x key=%s\n", __func__, t, h, key); #endif for (e = t->buckets[h & t->bucketsMask]; e != NULL; e = e->next) { chainlen++; if (e->key_hash == h && strcmp(e->key, key) == 0) break; } if (chainlen > t->maxchain) t->maxchain = chainlen; return e; } static bool HashEntry_KeyEquals(const HashEntry *he, Substring key) { const char *heKey, *p; heKey = he->key; for (p = key.start; p != key.end; p++, heKey++) if (*p != *heKey || *heKey == '\0') return false; return *heKey == '\0'; } static HashEntry * HashTable_FindEntryBySubstring(HashTable *t, Substring key, unsigned int h) { HashEntry *e; unsigned int chainlen = 0; #ifdef DEBUG_HASH_LOOKUP - DEBUG4(HASH, "%s: %p h=%08x key=%.*s\n", __func__, t, h, + DEBUG5(HASH, "%s: %p h=%08x key=%.*s\n", __func__, t, h, (int)Substring_Length(key), key.start); #endif for (e = t->buckets[h & t->bucketsMask]; e != NULL; e = e->next) { chainlen++; if (e->key_hash == h && HashEntry_KeyEquals(e, key)) break; } if (chainlen > t->maxchain) t->maxchain = chainlen; return e; } /* Set up the hash table. */ void HashTable_Init(HashTable *t) { unsigned int n = 16, i; HashEntry **buckets = bmake_malloc(sizeof *buckets * n); for (i = 0; i < n; i++) buckets[i] = NULL; t->buckets = buckets; t->bucketsSize = n; t->numEntries = 0; t->bucketsMask = n - 1; t->maxchain = 0; } /* * Remove everything from the hash table and free up the memory for the keys * of the hash table, but not for the values associated to these keys. */ void HashTable_Done(HashTable *t) { HashEntry **buckets = t->buckets; size_t i, n = t->bucketsSize; for (i = 0; i < n; i++) { HashEntry *he = buckets[i]; while (he != NULL) { HashEntry *next = he->next; free(he); he = next; } } free(t->buckets); #ifdef CLEANUP t->buckets = NULL; #endif } /* Find the entry corresponding to the key, or return NULL. */ HashEntry * HashTable_FindEntry(HashTable *t, const char *key) { unsigned int h = Hash_String(key, NULL); return HashTable_Find(t, h, key); } /* Find the value corresponding to the key, or return NULL. */ void * HashTable_FindValue(HashTable *t, const char *key) { HashEntry *he = HashTable_FindEntry(t, key); return he != NULL ? he->value : NULL; } /* * Find the value corresponding to the key and the precomputed hash, * or return NULL. */ void * HashTable_FindValueBySubstringHash(HashTable *t, Substring key, unsigned int h) { HashEntry *he = HashTable_FindEntryBySubstring(t, key, h); return he != NULL ? he->value : NULL; } /* * Make the hash table larger. Any bucket numbers from the old table become * invalid; the hash codes stay valid though. */ static void HashTable_Enlarge(HashTable *t) { unsigned int oldSize = t->bucketsSize; HashEntry **oldBuckets = t->buckets; unsigned int newSize = 2 * oldSize; unsigned int newMask = newSize - 1; HashEntry **newBuckets = bmake_malloc(sizeof *newBuckets * newSize); size_t i; for (i = 0; i < newSize; i++) newBuckets[i] = NULL; for (i = 0; i < oldSize; i++) { HashEntry *he = oldBuckets[i]; while (he != NULL) { HashEntry *next = he->next; he->next = newBuckets[he->key_hash & newMask]; newBuckets[he->key_hash & newMask] = he; he = next; } } free(oldBuckets); t->bucketsSize = newSize; t->bucketsMask = newMask; t->buckets = newBuckets; DEBUG5(HASH, "%s: %p size=%d entries=%d maxchain=%d\n", __func__, (void *)t, t->bucketsSize, t->numEntries, t->maxchain); t->maxchain = 0; } /* * Find or create an entry corresponding to the key. * Return in out_isNew whether a new entry has been created. */ HashEntry * HashTable_CreateEntry(HashTable *t, const char *key, bool *out_isNew) { size_t keylen; unsigned int h = Hash_String(key, &keylen); HashEntry *he = HashTable_Find(t, h, key); if (he != NULL) { if (out_isNew != NULL) *out_isNew = false; return he; } if (t->numEntries >= rebuildLimit * t->bucketsSize) HashTable_Enlarge(t); he = bmake_malloc(sizeof *he + keylen); he->value = NULL; he->key_hash = h; memcpy(he->key, key, keylen + 1); he->next = t->buckets[h & t->bucketsMask]; t->buckets[h & t->bucketsMask] = he; t->numEntries++; if (out_isNew != NULL) *out_isNew = true; return he; } HashEntry * HashTable_Set(HashTable *t, const char *key, void *value) { HashEntry *he = HashTable_CreateEntry(t, key, NULL); HashEntry_Set(he, value); return he; } /* Delete the entry from the table and free the associated memory. */ void HashTable_DeleteEntry(HashTable *t, HashEntry *he) { HashEntry **ref = &t->buckets[he->key_hash & t->bucketsMask]; HashEntry *p; for (; (p = *ref) != NULL; ref = &p->next) { if (p == he) { *ref = p->next; free(p); t->numEntries--; return; } } abort(); } -/* Set things up for iterating over all entries in the hash table. */ -void -HashIter_Init(HashIter *hi, HashTable *t) -{ - hi->table = t; - hi->nextBucket = 0; - hi->entry = NULL; -} - /* * Return the next entry in the hash table, or NULL if the end of the table * is reached. */ HashEntry * HashIter_Next(HashIter *hi) { HashTable *t = hi->table; HashEntry *he = hi->entry; HashEntry **buckets = t->buckets; unsigned int bucketsSize = t->bucketsSize; if (he != NULL) he = he->next; /* skip the most recently returned entry */ while (he == NULL) { /* find the next nonempty chain */ if (hi->nextBucket >= bucketsSize) return NULL; he = buckets[hi->nextBucket++]; } hi->entry = he; return he; } void HashTable_DebugStats(HashTable *t, const char *name) { DEBUG4(HASH, "HashTable %s: size=%u numEntries=%u maxchain=%u\n", name, t->bucketsSize, t->numEntries, t->maxchain); } diff --git a/contrib/bmake/hash.h b/contrib/bmake/hash.h index 8e7a567b6dba..8ff5490bdd95 100644 --- a/contrib/bmake/hash.h +++ b/contrib/bmake/hash.h @@ -1,170 +1,179 @@ -/* $NetBSD: hash.h,v 1.40 2021/04/11 12:46:54 rillig Exp $ */ +/* $NetBSD: hash.h,v 1.41 2021/12/07 21:58:01 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)hash.h 8.1 (Berkeley) 6/6/93 */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)hash.h 8.1 (Berkeley) 6/6/93 */ /* Hash tables with strings as keys and arbitrary pointers as values. */ #ifndef MAKE_HASH_H #define MAKE_HASH_H /* A single key-value entry in the hash table. */ typedef struct HashEntry { struct HashEntry *next; /* Used to link together all the entries * associated with the same bucket. */ void *value; unsigned int key_hash; /* hash value of the key */ char key[1]; /* key string, variable length */ } HashEntry; /* The hash table containing the entries. */ typedef struct HashTable { HashEntry **buckets; /* Pointers to HashEntry, one * for each bucket in the table. */ unsigned int bucketsSize; unsigned int numEntries; /* Number of entries in the table. */ unsigned int bucketsMask; /* Used to select the bucket for a hash. */ unsigned int maxchain; /* max length of chain detected */ } HashTable; /* State of an iteration over all entries in a table. */ typedef struct HashIter { HashTable *table; /* Table being searched. */ unsigned int nextBucket; /* Next bucket to check (after current). */ HashEntry *entry; /* Next entry to check in current bucket. */ } HashIter; /* A set of strings. */ typedef struct HashSet { HashTable tbl; } HashSet; MAKE_INLINE void * HashEntry_Get(HashEntry *h) { return h->value; } MAKE_INLINE void HashEntry_Set(HashEntry *h, void *datum) { h->value = datum; } +/* Set things up for iterating over all entries in the hash table. */ +MAKE_INLINE void +HashIter_Init(HashIter *hi, HashTable *t) +{ + hi->table = t; + hi->nextBucket = 0; + hi->entry = NULL; +} + void HashTable_Init(HashTable *); void HashTable_Done(HashTable *); HashEntry *HashTable_FindEntry(HashTable *, const char *); void *HashTable_FindValue(HashTable *, const char *); unsigned int Hash_Substring(Substring); void *HashTable_FindValueBySubstringHash(HashTable *, Substring, unsigned int); HashEntry *HashTable_CreateEntry(HashTable *, const char *, bool *); HashEntry *HashTable_Set(HashTable *, const char *, void *); void HashTable_DeleteEntry(HashTable *, HashEntry *); void HashTable_DebugStats(HashTable *, const char *); void HashIter_Init(HashIter *, HashTable *); HashEntry *HashIter_Next(HashIter *); MAKE_INLINE void HashSet_Init(HashSet *set) { HashTable_Init(&set->tbl); } MAKE_INLINE void HashSet_Done(HashSet *set) { HashTable_Done(&set->tbl); } MAKE_INLINE bool HashSet_Add(HashSet *set, const char *key) { bool isNew; (void)HashTable_CreateEntry(&set->tbl, key, &isNew); return isNew; } MAKE_INLINE bool HashSet_Contains(HashSet *set, const char *key) { return HashTable_FindEntry(&set->tbl, key) != NULL; } MAKE_INLINE void HashIter_InitSet(HashIter *hi, HashSet *set) { HashIter_Init(hi, &set->tbl); } #endif /* MAKE_HASH_H */ diff --git a/contrib/bmake/import.sh b/contrib/bmake/import.sh index b80e120daab1..08f352609fe8 100755 --- a/contrib/bmake/import.sh +++ b/contrib/bmake/import.sh @@ -1,92 +1,97 @@ #!/bin/sh # Import bmake ECHO= GIT=${GIT:-git} # For consistency... Error() { echo ERROR: ${1+"$@"} >&2 exit 1 } Cd() { [ $# -eq 1 ] || Error "Cd() takes a single parameter." cd $1 || Error "cannot \"cd $1\" from $PWD" } # Call this function and then follow it by any specific import script additions option_parsing() { local _shift=$# # Parse command line options while : do case "$1" in *=*) eval "$1"; shift;; --) shift; break;; -a) TARBALL=$2; shift 2;; + -d) RM=echo; shift;; -n) ECHO=echo; shift;; -P) PR=$2; shift 2;; -r) REVIEWER=$2; shift 2;; -u) url=$2; shift 2;; -h) echo "Usage:"; echo " "$0 '[-ahnPr] [TARBALL=] [PR=] [REVIEWER=]' echo " "$0 '-a # (a)rchive' echo " "$0 '-h # print usage' echo " "$0 '-n # do not import, check only.' echo " "$0 '-P # Use PR' echo " "$0 '-r # (r)eviewed by' echo " "$0 'PR=' echo " "$0 'REVIEWER=' exit 1;; *) break;; esac done return $(($_shift - $#)) } ### option_parsing "$@" shift $? TF=/tmp/.$USER.$$ Cd `dirname $0` test -s ${TARBALL:-/dev/null} || Error need TARBALL here=`pwd` +SB=${SB:-`dirname $here`} # thing should match what the TARBALL contains thing=`basename $here` case "$thing" in bmake) (cd .. && tar zxf $TARBALL);; *) Error "we should be in bmake";; esac VERSION=`grep '^_MAKE_VERSION' VERSION | sed 's,.*=[[:space:]]*,,'` rm -f *~ -mkdir -p ../tmp +mkdir -p $SB/tmp # new files are handled automatically # but we need to rm if needed # FILES are kept sorted so we can determine what was added and deleted # but we need to take care dealing with re-ordering (${GIT} diff FILES | sed -n '/^[+-][^+-]/p'; \ ${GIT} diff mk/FILES | sed -n '/^[+-][^+-]/s,.,&mk/,p' ) > $TF.diffs grep '^+' $TF.diffs | sed 's,^.,,' | sort > $TF.adds grep '^-' $TF.diffs | sed 's,^.,,' | sort > $TF.rms comm -13 $TF.adds $TF.rms > $TF.rm if [ -z "$ECHO" ]; then test -s $TF.rm && xargs rm -f < $TF.rm $GIT add -A - $GIT diff --staged | tee ../tmp/bmake-import.diff - echo "$GIT tag -a vendor/NetBSD/bmake/$VERSION" > ../tmp/bmake-post.sh - echo "After you commit, run $here/../tmp/bmake-post.sh" + $GIT diff --staged | tee $SB/tmp/bmake-import.diff + { echo "$GIT tag -a vendor/NetBSD/bmake/$VERSION" + echo "echo \"When ready do: $GIT push --follow-tags\"" + } > $SB/tmp/bmake-post.sh + echo "After you commit, run $SB/tmp/bmake-post.sh" else comm -23 $TF.adds $TF.rms > $TF.add test -s $TF.rm && { echo Removing:; cat $TF.rm; } test -s $TF.add && { echo Adding:; cat $TF.add; } $GIT diff fi +${RM:-rm} -f $TF.* diff --git a/contrib/bmake/job.c b/contrib/bmake/job.c index e4b77477e816..f90c35bb6d49 100644 --- a/contrib/bmake/job.c +++ b/contrib/bmake/job.c @@ -1,3050 +1,3067 @@ -/* $NetBSD: job.c,v 1.435 2021/06/16 09:47:51 rillig Exp $ */ +/* $NetBSD: job.c,v 1.440 2021/11/28 19:51:06 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * job.c -- * handle the creation etc. of our child processes. * * Interface: * Job_Init Called to initialize this module. In addition, * the .BEGIN target is made including all of its * dependencies before this function returns. * Hence, the makefiles must have been parsed * before this function is called. * * Job_End Clean up any memory used. * * Job_Make Start the creation of the given target. * * Job_CatchChildren * Check for and handle the termination of any * children. This must be called reasonably * frequently to keep the whole make going at * a decent clip, since job table entries aren't * removed until their process is caught this way. * * Job_CatchOutput * Print any output our children have produced. * Should also be called fairly frequently to * keep the user informed of what's going on. * If no output is waiting, it will block for * a time given by the SEL_* constants, below, * or until output is ready. * * Job_ParseShell Given a special dependency line with target '.SHELL', * define the shell that is used for the creation * commands in jobs mode. * * Job_Finish Perform any final processing which needs doing. * This includes the execution of any commands * which have been/were attached to the .END * target. It should only be called when the * job table is empty. * * Job_AbortAll Abort all currently running jobs. Do not handle * output or do anything for the jobs, just kill them. * Should only be called in an emergency. * * Job_CheckCommands * Verify that the commands for a target are * ok. Provide them if necessary and possible. * * Job_Touch Update a target without really updating it. * * Job_Wait Wait for all currently-running jobs to finish. */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include #include #include #include "wait.h" #include #if !defined(USE_SELECT) && defined(HAVE_POLL_H) #include #else #ifndef USE_SELECT /* no poll.h */ # define USE_SELECT #endif #if defined(HAVE_SYS_SELECT_H) # include #endif #endif #include #include #if defined(HAVE_SYS_SOCKET_H) # include #endif #include "make.h" #include "dir.h" #include "job.h" #include "pathnames.h" #include "trace.h" /* "@(#)job.c 8.2 (Berkeley) 3/19/94" */ -MAKE_RCSID("$NetBSD: job.c,v 1.435 2021/06/16 09:47:51 rillig Exp $"); +MAKE_RCSID("$NetBSD: job.c,v 1.440 2021/11/28 19:51:06 rillig Exp $"); /* * A shell defines how the commands are run. All commands for a target are * written into a single file, which is then given to the shell to execute * the commands from it. The commands are written to the file using a few * templates for echo control and error control. * * The name of the shell is the basename for the predefined shells, such as * "sh", "csh", "bash". For custom shells, it is the full pathname, and its * basename is used to select the type of shell; the longest match wins. * So /usr/pkg/bin/bash has type sh, /usr/local/bin/tcsh has type csh. * * The echoing of command lines is controlled using hasEchoCtl, echoOff, * echoOn, noPrint and noPrintLen. When echoOff is executed by the shell, it * still outputs something, but this something is not interesting, therefore * it is filtered out using noPrint and noPrintLen. * * The error checking for individual commands is controlled using hasErrCtl, * errOn, errOff and runChkTmpl. * * In case a shell doesn't have error control, echoTmpl is a printf template * for echoing the command, should echoing be on; runIgnTmpl is another * printf template for executing the command while ignoring the return * status. Finally runChkTmpl is a printf template for running the command and * causing the shell to exit on error. If any of these strings are empty when * hasErrCtl is false, the command will be executed anyway as is, and if it * causes an error, so be it. Any templates set up to echo the command will * escape any '$ ` \ "' characters in the command string to avoid unwanted * shell code injection, the escaped command is safe to use in double quotes. * * The command-line flags "echo" and "exit" also control the behavior. The * "echo" flag causes the shell to start echoing commands right away. The * "exit" flag causes the shell to exit when an error is detected in one of * the commands. */ typedef struct Shell { /* * The name of the shell. For Bourne and C shells, this is used only * to find the shell description when used as the single source of a * .SHELL target. For user-defined shells, this is the full path of * the shell. */ const char *name; bool hasEchoCtl; /* whether both echoOff and echoOn are there */ const char *echoOff; /* command to turn echoing off */ const char *echoOn; /* command to turn echoing back on */ const char *noPrint; /* text to skip when printing output from the * shell. This is usually the same as echoOff */ size_t noPrintLen; /* length of noPrint command */ bool hasErrCtl; /* whether error checking can be controlled * for individual commands */ const char *errOn; /* command to turn on error checking */ const char *errOff; /* command to turn off error checking */ const char *echoTmpl; /* template to echo a command */ const char *runIgnTmpl; /* template to run a command * without error checking */ const char *runChkTmpl; /* template to run a command * with error checking */ /* string literal that results in a newline character when it appears * outside of any 'quote' or "quote" characters */ const char *newline; char commentChar; /* character used by shell for comment lines */ const char *echoFlag; /* shell flag to echo commands */ const char *errFlag; /* shell flag to exit on error */ } Shell; typedef struct CommandFlags { /* Whether to echo the command before or instead of running it. */ bool echo; /* Run the command even in -n or -N mode. */ bool always; /* * true if we turned error checking off before writing the command to * the commands file and need to turn it back on */ bool ignerr; } CommandFlags; /* * Write shell commands to a file. * * TODO: keep track of whether commands are echoed. * TODO: keep track of whether error checking is active. */ typedef struct ShellWriter { FILE *f; /* we've sent 'set -x' */ bool xtraced; } ShellWriter; /* * FreeBSD: traditionally .MAKE is not required to * pass jobs queue to sub-makes. * Use .MAKE.ALWAYS_PASS_JOB_QUEUE=no to disable. */ #define MAKE_ALWAYS_PASS_JOB_QUEUE "${.MAKE.ALWAYS_PASS_JOB_QUEUE:U}" static bool Always_pass_job_queue = true; /* * FreeBSD: aborting entire parallel make isn't always * desired. When doing tinderbox for example, failure of * one architecture should not stop all. * We still want to bail on interrupt though. */ #define MAKE_JOB_ERROR_TOKEN "${MAKE_JOB_ERROR_TOKEN:U}" static bool Job_error_token = true; /* * error handling variables */ static int job_errors = 0; /* number of errors reported */ static enum { /* Why is the make aborting? */ ABORT_NONE, ABORT_ERROR, /* Aborted because of an error */ ABORT_INTERRUPT, /* Aborted because it was interrupted */ ABORT_WAIT /* Waiting for jobs to finish */ } aborting = ABORT_NONE; #define JOB_TOKENS "+EI+" /* Token to requeue for each abort state */ /* * this tracks the number of tokens currently "out" to build jobs. */ int jobTokensRunning = 0; typedef enum JobStartResult { JOB_RUNNING, /* Job is running */ JOB_ERROR, /* Error in starting the job */ JOB_FINISHED /* The job is already finished */ } JobStartResult; /* * Descriptions for various shells. * * The build environment may set DEFSHELL_INDEX to one of * DEFSHELL_INDEX_SH, DEFSHELL_INDEX_KSH, or DEFSHELL_INDEX_CSH, to * select one of the predefined shells as the default shell. * * Alternatively, the build environment may set DEFSHELL_CUSTOM to the * name or the full path of a sh-compatible shell, which will be used as * the default shell. * * ".SHELL" lines in Makefiles can choose the default shell from the * set defined here, or add additional shells. */ #ifdef DEFSHELL_CUSTOM #define DEFSHELL_INDEX_CUSTOM 0 #define DEFSHELL_INDEX_SH 1 #define DEFSHELL_INDEX_KSH 2 #define DEFSHELL_INDEX_CSH 3 #else /* !DEFSHELL_CUSTOM */ #define DEFSHELL_INDEX_SH 0 #define DEFSHELL_INDEX_KSH 1 #define DEFSHELL_INDEX_CSH 2 #endif /* !DEFSHELL_CUSTOM */ #ifndef DEFSHELL_INDEX #define DEFSHELL_INDEX 0 /* DEFSHELL_INDEX_CUSTOM or DEFSHELL_INDEX_SH */ #endif /* !DEFSHELL_INDEX */ static Shell shells[] = { #ifdef DEFSHELL_CUSTOM /* * An sh-compatible shell with a non-standard name. * * Keep this in sync with the "sh" description below, but avoid * non-portable features that might not be supplied by all * sh-compatible shells. */ { DEFSHELL_CUSTOM, /* .name */ false, /* .hasEchoCtl */ "", /* .echoOff */ "", /* .echoOn */ "", /* .noPrint */ 0, /* .noPrintLen */ false, /* .hasErrCtl */ "", /* .errOn */ "", /* .errOff */ "echo \"%s\"\n", /* .echoTmpl */ "%s\n", /* .runIgnTmpl */ "{ %s \n} || exit $?\n", /* .runChkTmpl */ "'\n'", /* .newline */ '#', /* .commentChar */ "", /* .echoFlag */ "", /* .errFlag */ }, #endif /* DEFSHELL_CUSTOM */ /* * SH description. Echo control is also possible and, under * sun UNIX anyway, one can even control error checking. */ { "sh", /* .name */ false, /* .hasEchoCtl */ "", /* .echoOff */ "", /* .echoOn */ "", /* .noPrint */ 0, /* .noPrintLen */ false, /* .hasErrCtl */ "", /* .errOn */ "", /* .errOff */ "echo \"%s\"\n", /* .echoTmpl */ "%s\n", /* .runIgnTmpl */ "{ %s \n} || exit $?\n", /* .runChkTmpl */ "'\n'", /* .newline */ '#', /* .commentChar*/ #if defined(MAKE_NATIVE) && defined(__NetBSD__) /* XXX: -q is not really echoFlag, it's more like noEchoInSysFlag. */ "q", /* .echoFlag */ #else "", /* .echoFlag */ #endif "", /* .errFlag */ }, /* * KSH description. */ { "ksh", /* .name */ true, /* .hasEchoCtl */ "set +v", /* .echoOff */ "set -v", /* .echoOn */ "set +v", /* .noPrint */ 6, /* .noPrintLen */ false, /* .hasErrCtl */ "", /* .errOn */ "", /* .errOff */ "echo \"%s\"\n", /* .echoTmpl */ "%s\n", /* .runIgnTmpl */ "{ %s \n} || exit $?\n", /* .runChkTmpl */ "'\n'", /* .newline */ '#', /* .commentChar */ "v", /* .echoFlag */ "", /* .errFlag */ }, /* * CSH description. The csh can do echo control by playing * with the setting of the 'echo' shell variable. Sadly, * however, it is unable to do error control nicely. */ { "csh", /* .name */ true, /* .hasEchoCtl */ "unset verbose", /* .echoOff */ "set verbose", /* .echoOn */ "unset verbose", /* .noPrint */ 13, /* .noPrintLen */ false, /* .hasErrCtl */ "", /* .errOn */ "", /* .errOff */ "echo \"%s\"\n", /* .echoTmpl */ "csh -c \"%s || exit 0\"\n", /* .runIgnTmpl */ "", /* .runChkTmpl */ "'\\\n'", /* .newline */ '#', /* .commentChar */ "v", /* .echoFlag */ "e", /* .errFlag */ } }; /* * This is the shell to which we pass all commands in the Makefile. * It is set by the Job_ParseShell function. */ static Shell *shell = &shells[DEFSHELL_INDEX]; const char *shellPath = NULL; /* full pathname of executable image */ const char *shellName = NULL; /* last component of shellPath */ char *shellErrFlag = NULL; static char *shell_freeIt = NULL; /* Allocated memory for custom .SHELL */ static Job *job_table; /* The structures that describe them */ static Job *job_table_end; /* job_table + maxJobs */ static unsigned int wantToken; /* we want a token */ static bool lurking_children = false; static bool make_suspended = false; /* Whether we've seen a SIGTSTP (etc) */ /* * Set of descriptors of pipes connected to * the output channels of children */ static struct pollfd *fds = NULL; static Job **jobByFdIndex = NULL; static nfds_t fdsLen = 0; static void watchfd(Job *); static void clearfd(Job *); static bool readyfd(Job *); static char *targPrefix = NULL; /* To identify a job change in the output. */ static Job tokenWaitJob; /* token wait pseudo-job */ static Job childExitJob; /* child exit pseudo-job */ #define CHILD_EXIT "." #define DO_JOB_RESUME "R" enum { npseudojobs = 2 /* number of pseudo-jobs */ }; static sigset_t caught_signals; /* Set of signals we handle */ static volatile sig_atomic_t caught_sigchld; static void CollectOutput(Job *, bool); static void JobInterrupt(bool, int) MAKE_ATTR_DEAD; static void JobRestartJobs(void); static void JobSigReset(void); static void SwitchOutputTo(GNode *gn) { /* The node for which output was most recently produced. */ static GNode *lastNode = NULL; if (gn == lastNode) return; lastNode = gn; if (opts.maxJobs != 1 && targPrefix != NULL && targPrefix[0] != '\0') (void)fprintf(stdout, "%s %s ---\n", targPrefix, gn->name); } static unsigned nfds_per_job(void) { #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) if (useMeta) return 2; #endif return 1; } void Job_FlagsToString(const Job *job, char *buf, size_t bufsize) { snprintf(buf, bufsize, "%c%c%c", job->ignerr ? 'i' : '-', !job->echo ? 's' : '-', job->special ? 'S' : '-'); } static void DumpJobs(const char *where) { Job *job; char flags[4]; debug_printf("job table @ %s\n", where); for (job = job_table; job < job_table_end; job++) { Job_FlagsToString(job, flags, sizeof flags); debug_printf("job %d, status %d, flags %s, pid %d\n", (int)(job - job_table), job->status, flags, job->pid); } } /* * Delete the target of a failed, interrupted, or otherwise * unsuccessful job unless inhibited by .PRECIOUS. */ static void JobDeleteTarget(GNode *gn) { const char *file; if (gn->type & OP_JOIN) return; if (gn->type & OP_PHONY) return; if (Targ_Precious(gn)) return; if (opts.noExecute) return; file = GNode_Path(gn); if (eunlink(file) != -1) Error("*** %s removed", file); } /* * JobSigLock/JobSigUnlock * * Signal lock routines to get exclusive access. Currently used to * protect `jobs' and `stoppedJobs' list manipulations. */ static void JobSigLock(sigset_t *omaskp) { if (sigprocmask(SIG_BLOCK, &caught_signals, omaskp) != 0) { Punt("JobSigLock: sigprocmask: %s", strerror(errno)); sigemptyset(omaskp); } } static void JobSigUnlock(sigset_t *omaskp) { (void)sigprocmask(SIG_SETMASK, omaskp, NULL); } static void JobCreatePipe(Job *job, int minfd) { int i, fd, flags; int pipe_fds[2]; if (pipe(pipe_fds) == -1) Punt("Cannot create pipe: %s", strerror(errno)); for (i = 0; i < 2; i++) { /* Avoid using low numbered fds */ fd = fcntl(pipe_fds[i], F_DUPFD, minfd); if (fd != -1) { close(pipe_fds[i]); pipe_fds[i] = fd; } } job->inPipe = pipe_fds[0]; job->outPipe = pipe_fds[1]; /* Set close-on-exec flag for both */ if (fcntl(job->inPipe, F_SETFD, FD_CLOEXEC) == -1) Punt("Cannot set close-on-exec: %s", strerror(errno)); if (fcntl(job->outPipe, F_SETFD, FD_CLOEXEC) == -1) Punt("Cannot set close-on-exec: %s", strerror(errno)); /* * We mark the input side of the pipe non-blocking; we poll(2) the * pipe when we're waiting for a job token, but we might lose the * race for the token when a new one becomes available, so the read * from the pipe should not block. */ flags = fcntl(job->inPipe, F_GETFL, 0); if (flags == -1) Punt("Cannot get flags: %s", strerror(errno)); flags |= O_NONBLOCK; if (fcntl(job->inPipe, F_SETFL, flags) == -1) Punt("Cannot set flags: %s", strerror(errno)); } /* Pass the signal to each running job. */ static void JobCondPassSig(int signo) { Job *job; DEBUG1(JOB, "JobCondPassSig(%d) called.\n", signo); for (job = job_table; job < job_table_end; job++) { if (job->status != JOB_ST_RUNNING) continue; DEBUG2(JOB, "JobCondPassSig passing signal %d to child %d.\n", signo, job->pid); KILLPG(job->pid, signo); } } /* * SIGCHLD handler. * * Sends a token on the child exit pipe to wake us up from select()/poll(). */ /*ARGSUSED*/ static void JobChildSig(int signo MAKE_ATTR_UNUSED) { caught_sigchld = 1; while (write(childExitJob.outPipe, CHILD_EXIT, 1) == -1 && errno == EAGAIN) continue; } /* Resume all stopped jobs. */ /*ARGSUSED*/ static void JobContinueSig(int signo MAKE_ATTR_UNUSED) { /* * Defer sending SIGCONT to our stopped children until we return * from the signal handler. */ while (write(childExitJob.outPipe, DO_JOB_RESUME, 1) == -1 && errno == EAGAIN) continue; } /* * Pass a signal on to all jobs, then resend to ourselves. * We die by the same signal. */ MAKE_ATTR_DEAD static void JobPassSig_int(int signo) { /* Run .INTERRUPT target then exit */ JobInterrupt(true, signo); } /* * Pass a signal on to all jobs, then resend to ourselves. * We die by the same signal. */ MAKE_ATTR_DEAD static void JobPassSig_term(int signo) { /* Dont run .INTERRUPT target then exit */ JobInterrupt(false, signo); } static void JobPassSig_suspend(int signo) { sigset_t nmask, omask; struct sigaction act; /* Suppress job started/continued messages */ make_suspended = true; /* Pass the signal onto every job */ JobCondPassSig(signo); /* * Send ourselves the signal now we've given the message to everyone * else. Note we block everything else possible while we're getting * the signal. This ensures that all our jobs get continued when we * wake up before we take any other signal. */ sigfillset(&nmask); sigdelset(&nmask, signo); (void)sigprocmask(SIG_SETMASK, &nmask, &omask); act.sa_handler = SIG_DFL; sigemptyset(&act.sa_mask); act.sa_flags = 0; (void)sigaction(signo, &act, NULL); DEBUG1(JOB, "JobPassSig passing signal %d to self.\n", signo); (void)kill(getpid(), signo); /* * We've been continued. * * A whole host of signals continue to happen! * SIGCHLD for any processes that actually suspended themselves. * SIGCHLD for any processes that exited while we were alseep. * The SIGCONT that actually caused us to wakeup. * * Since we defer passing the SIGCONT on to our children until * the main processing loop, we can be sure that all the SIGCHLD * events will have happened by then - and that the waitpid() will * collect the child 'suspended' events. * For correct sequencing we just need to ensure we process the * waitpid() before passing on the SIGCONT. * * In any case nothing else is needed here. */ /* Restore handler and signal mask */ act.sa_handler = JobPassSig_suspend; (void)sigaction(signo, &act, NULL); (void)sigprocmask(SIG_SETMASK, &omask, NULL); } static Job * JobFindPid(int pid, JobStatus status, bool isJobs) { Job *job; for (job = job_table; job < job_table_end; job++) { if (job->status == status && job->pid == pid) return job; } if (DEBUG(JOB) && isJobs) DumpJobs("no pid"); return NULL; } /* Parse leading '@', '-' and '+', which control the exact execution mode. */ static void ParseCommandFlags(char **pp, CommandFlags *out_cmdFlags) { char *p = *pp; out_cmdFlags->echo = true; out_cmdFlags->ignerr = false; out_cmdFlags->always = false; for (;;) { if (*p == '@') out_cmdFlags->echo = DEBUG(LOUD); else if (*p == '-') out_cmdFlags->ignerr = true; else if (*p == '+') out_cmdFlags->always = true; else break; p++; } pp_skip_whitespace(&p); *pp = p; } /* Escape a string for a double-quoted string literal in sh, csh and ksh. */ static char * EscapeShellDblQuot(const char *cmd) { size_t i, j; /* Worst that could happen is every char needs escaping. */ char *esc = bmake_malloc(strlen(cmd) * 2 + 1); for (i = 0, j = 0; cmd[i] != '\0'; i++, j++) { if (cmd[i] == '$' || cmd[i] == '`' || cmd[i] == '\\' || cmd[i] == '"') esc[j++] = '\\'; esc[j] = cmd[i]; } esc[j] = '\0'; return esc; } static void ShellWriter_WriteFmt(ShellWriter *wr, const char *fmt, const char *arg) { DEBUG1(JOB, fmt, arg); (void)fprintf(wr->f, fmt, arg); - /* XXX: Is flushing needed in any case, or only if f == stdout? */ - (void)fflush(wr->f); + if (wr->f == stdout) + (void)fflush(wr->f); } static void ShellWriter_WriteLine(ShellWriter *wr, const char *line) { ShellWriter_WriteFmt(wr, "%s\n", line); } static void ShellWriter_EchoOff(ShellWriter *wr) { if (shell->hasEchoCtl) ShellWriter_WriteLine(wr, shell->echoOff); } static void ShellWriter_EchoCmd(ShellWriter *wr, const char *escCmd) { ShellWriter_WriteFmt(wr, shell->echoTmpl, escCmd); } static void ShellWriter_EchoOn(ShellWriter *wr) { if (shell->hasEchoCtl) ShellWriter_WriteLine(wr, shell->echoOn); } static void ShellWriter_TraceOn(ShellWriter *wr) { if (!wr->xtraced) { ShellWriter_WriteLine(wr, "set -x"); wr->xtraced = true; } } static void ShellWriter_ErrOff(ShellWriter *wr, bool echo) { if (echo) ShellWriter_EchoOff(wr); ShellWriter_WriteLine(wr, shell->errOff); if (echo) ShellWriter_EchoOn(wr); } static void ShellWriter_ErrOn(ShellWriter *wr, bool echo) { if (echo) ShellWriter_EchoOff(wr); ShellWriter_WriteLine(wr, shell->errOn); if (echo) ShellWriter_EchoOn(wr); } /* * The shell has no built-in error control, so emulate error control by * enclosing each shell command in a template like "{ %s \n } || exit $?" * (configurable per shell). */ static void JobWriteSpecialsEchoCtl(Job *job, ShellWriter *wr, CommandFlags *inout_cmdFlags, const char *escCmd, const char **inout_cmdTemplate) { /* XXX: Why is the job modified at this point? */ job->ignerr = true; if (job->echo && inout_cmdFlags->echo) { ShellWriter_EchoOff(wr); ShellWriter_EchoCmd(wr, escCmd); /* * Leave echoing off so the user doesn't see the commands * for toggling the error checking. */ inout_cmdFlags->echo = false; } else { if (inout_cmdFlags->echo) ShellWriter_EchoCmd(wr, escCmd); } *inout_cmdTemplate = shell->runIgnTmpl; /* * The template runIgnTmpl already takes care of ignoring errors, * so pretend error checking is still on. * XXX: What effects does this have, and why is it necessary? */ inout_cmdFlags->ignerr = false; } static void JobWriteSpecials(Job *job, ShellWriter *wr, const char *escCmd, bool run, CommandFlags *inout_cmdFlags, const char **inout_cmdTemplate) { if (!run) { /* * If there is no command to run, there is no need to switch * error checking off and on again for nothing. */ inout_cmdFlags->ignerr = false; } else if (shell->hasErrCtl) ShellWriter_ErrOff(wr, job->echo && inout_cmdFlags->echo); else if (shell->runIgnTmpl != NULL && shell->runIgnTmpl[0] != '\0') { JobWriteSpecialsEchoCtl(job, wr, inout_cmdFlags, escCmd, inout_cmdTemplate); } else inout_cmdFlags->ignerr = false; } /* * Write a shell command to the job's commands file, to be run later. * * If the command starts with '@' and neither the -s nor the -n flag was * given to make, stick a shell-specific echoOff command in the script. * * If the command starts with '-' and the shell has no error control (none * of the predefined shells has that), ignore errors for the entire job. * * XXX: Why ignore errors for the entire job? This is even documented in the * manual page, but without any rationale since there is no known rationale. * * XXX: The manual page says the '-' "affects the entire job", but that's not * accurate. The '-' does not affect the commands before the '-'. * * If the command is just "...", skip all further commands of this job. These * commands are attached to the .END node instead and will be run by * Job_Finish after all other targets have been made. */ static void JobWriteCommand(Job *job, ShellWriter *wr, StringListNode *ln, const char *ucmd) { bool run; CommandFlags cmdFlags; /* Template for writing a command to the shell file */ const char *cmdTemplate; char *xcmd; /* The expanded command */ char *xcmdStart; char *escCmd; /* xcmd escaped to be used in double quotes */ run = GNode_ShouldExecute(job->node); Var_Subst(ucmd, job->node, VARE_WANTRES, &xcmd); /* TODO: handle errors */ xcmdStart = xcmd; cmdTemplate = "%s\n"; ParseCommandFlags(&xcmd, &cmdFlags); /* The '+' command flag overrides the -n or -N options. */ if (cmdFlags.always && !run) { /* * We're not actually executing anything... * but this one needs to be - use compat mode just for it. */ Compat_RunCommand(ucmd, job->node, ln); free(xcmdStart); return; } /* * If the shell doesn't have error control, the alternate echoing * will be done (to avoid showing additional error checking code) * and this needs some characters escaped. */ escCmd = shell->hasErrCtl ? NULL : EscapeShellDblQuot(xcmd); if (!cmdFlags.echo) { if (job->echo && run && shell->hasEchoCtl) { ShellWriter_EchoOff(wr); } else { if (shell->hasErrCtl) cmdFlags.echo = true; } } if (cmdFlags.ignerr) { JobWriteSpecials(job, wr, escCmd, run, &cmdFlags, &cmdTemplate); } else { /* * If errors are being checked and the shell doesn't have * error control but does supply an runChkTmpl template, then * set up commands to run through it. */ if (!shell->hasErrCtl && shell->runChkTmpl != NULL && shell->runChkTmpl[0] != '\0') { if (job->echo && cmdFlags.echo) { ShellWriter_EchoOff(wr); ShellWriter_EchoCmd(wr, escCmd); cmdFlags.echo = false; } /* * If it's a comment line or blank, avoid the possible * syntax error generated by "{\n} || exit $?". */ cmdTemplate = escCmd[0] == shell->commentChar || escCmd[0] == '\0' ? shell->runIgnTmpl : shell->runChkTmpl; cmdFlags.ignerr = false; } } if (DEBUG(SHELL) && strcmp(shellName, "sh") == 0) ShellWriter_TraceOn(wr); ShellWriter_WriteFmt(wr, cmdTemplate, xcmd); free(xcmdStart); free(escCmd); if (cmdFlags.ignerr) ShellWriter_ErrOn(wr, cmdFlags.echo && job->echo); if (!cmdFlags.echo) ShellWriter_EchoOn(wr); } /* * Write all commands to the shell file that is later executed. * * The special command "..." stops writing and saves the remaining commands * to be executed later, when the target '.END' is made. * * Return whether at least one command was written to the shell file. */ static bool JobWriteCommands(Job *job) { StringListNode *ln; bool seen = false; ShellWriter wr; wr.f = job->cmdFILE; wr.xtraced = false; for (ln = job->node->commands.first; ln != NULL; ln = ln->next) { const char *cmd = ln->datum; if (strcmp(cmd, "...") == 0) { job->node->type |= OP_SAVE_CMDS; job->tailCmds = ln->next; break; } JobWriteCommand(job, &wr, ln, ln->datum); seen = true; } return seen; } /* * Save the delayed commands (those after '...'), to be executed later in * the '.END' node, when everything else is done. */ static void JobSaveCommands(Job *job) { StringListNode *ln; for (ln = job->tailCmds; ln != NULL; ln = ln->next) { const char *cmd = ln->datum; char *expanded_cmd; /* * XXX: This Var_Subst is only intended to expand the dynamic * variables such as .TARGET, .IMPSRC. It is not intended to * expand the other variables as well; see deptgt-end.mk. */ (void)Var_Subst(cmd, job->node, VARE_WANTRES, &expanded_cmd); /* TODO: handle errors */ Lst_Append(&Targ_GetEndNode()->commands, expanded_cmd); } } /* Called to close both input and output pipes when a job is finished. */ static void JobClosePipes(Job *job) { clearfd(job); (void)close(job->outPipe); job->outPipe = -1; CollectOutput(job, true); (void)close(job->inPipe); job->inPipe = -1; } static void DebugFailedJob(const Job *job) { const StringListNode *ln; if (!DEBUG(ERROR)) return; - debug_printf("\n*** Failed target: %s\n*** Failed commands:\n", - job->node->name); - for (ln = job->node->commands.first; ln != NULL; ln = ln->next) - debug_printf("\t%s\n", (const char *)ln->datum); + debug_printf("\n"); + debug_printf("*** Failed target: %s\n", job->node->name); + debug_printf("*** Failed commands:\n"); + for (ln = job->node->commands.first; ln != NULL; ln = ln->next) { + const char *cmd = ln->datum; + debug_printf("\t%s\n", cmd); + + if (strchr(cmd, '$') != NULL) { + char *xcmd; + (void)Var_Subst(cmd, job->node, VARE_WANTRES, &xcmd); + debug_printf("\t=> %s\n", xcmd); + free(xcmd); + } + } } static void JobFinishDoneExitedError(Job *job, WAIT_T *inout_status) { SwitchOutputTo(job->node); #ifdef USE_META if (useMeta) { meta_job_error(job, job->node, job->ignerr, WEXITSTATUS(*inout_status)); } #endif if (!shouldDieQuietly(job->node, -1)) { DebugFailedJob(job); (void)printf("*** [%s] Error code %d%s\n", job->node->name, WEXITSTATUS(*inout_status), job->ignerr ? " (ignored)" : ""); } if (job->ignerr) WAIT_STATUS(*inout_status) = 0; else { if (deleteOnError) JobDeleteTarget(job->node); PrintOnError(job->node, NULL); } } static void JobFinishDoneExited(Job *job, WAIT_T *inout_status) { DEBUG2(JOB, "Process %d [%s] exited.\n", job->pid, job->node->name); if (WEXITSTATUS(*inout_status) != 0) JobFinishDoneExitedError(job, inout_status); else if (DEBUG(JOB)) { SwitchOutputTo(job->node); (void)printf("*** [%s] Completed successfully\n", job->node->name); } } static void JobFinishDoneSignaled(Job *job, WAIT_T status) { SwitchOutputTo(job->node); DebugFailedJob(job); (void)printf("*** [%s] Signal %d\n", job->node->name, WTERMSIG(status)); if (deleteOnError) JobDeleteTarget(job->node); } static void JobFinishDone(Job *job, WAIT_T *inout_status) { if (WIFEXITED(*inout_status)) JobFinishDoneExited(job, inout_status); else JobFinishDoneSignaled(job, *inout_status); (void)fflush(stdout); } /* * Do final processing for the given job including updating parent nodes and * starting new jobs as available/necessary. * * Deferred commands for the job are placed on the .END node. * * If there was a serious error (job_errors != 0; not an ignored one), no more * jobs will be started. * * Input: * job job to finish * status sub-why job went away */ static void JobFinish (Job *job, WAIT_T status) { bool done, return_job_token; DEBUG3(JOB, "JobFinish: %d [%s], status %d\n", job->pid, job->node->name, status); if ((WIFEXITED(status) && ((WEXITSTATUS(status) != 0 && !job->ignerr))) || WIFSIGNALED(status)) { /* Finished because of an error. */ JobClosePipes(job); if (job->cmdFILE != NULL && job->cmdFILE != stdout) { - (void)fclose(job->cmdFILE); + if (fclose(job->cmdFILE) != 0) + Punt("Cannot write shell script for '%s': %s", + job->node->name, strerror(errno)); job->cmdFILE = NULL; } done = true; } else if (WIFEXITED(status)) { /* * Deal with ignored errors in -B mode. We need to print a * message telling of the ignored error as well as to run * the next command. */ done = WEXITSTATUS(status) != 0; JobClosePipes(job); } else { /* No need to close things down or anything. */ done = false; } if (done) JobFinishDone(job, &status); #ifdef USE_META if (useMeta) { int meta_status = meta_job_finish(job); if (meta_status != 0 && status == 0) status = meta_status; } #endif return_job_token = false; Trace_Log(JOBEND, job); if (!job->special) { if (WAIT_STATUS(status) != 0 || (aborting == ABORT_ERROR) || aborting == ABORT_INTERRUPT) return_job_token = true; } if (aborting != ABORT_ERROR && aborting != ABORT_INTERRUPT && (WAIT_STATUS(status) == 0)) { /* * As long as we aren't aborting and the job didn't return a * non-zero status that we shouldn't ignore, we call * Make_Update to update the parents. */ JobSaveCommands(job); job->node->made = MADE; if (!job->special) return_job_token = true; Make_Update(job->node); job->status = JOB_ST_FREE; } else if (status != 0) { job_errors++; job->status = JOB_ST_FREE; } if (job_errors > 0 && !opts.keepgoing && aborting != ABORT_INTERRUPT) { /* Prevent more jobs from getting started. */ aborting = ABORT_ERROR; } if (return_job_token) Job_TokenReturn(); if (aborting == ABORT_ERROR && jobTokensRunning == 0) Finish(job_errors); } static void TouchRegular(GNode *gn) { const char *file = GNode_Path(gn); struct utimbuf times; int fd; char c; times.actime = now; times.modtime = now; if (utime(file, ×) >= 0) return; fd = open(file, O_RDWR | O_CREAT, 0666); if (fd < 0) { (void)fprintf(stderr, "*** couldn't touch %s: %s\n", file, strerror(errno)); (void)fflush(stderr); return; /* XXX: What about propagating the error? */ } /* Last resort: update the file's time stamps in the traditional way. * XXX: This doesn't work for empty files, which are sometimes used * as marker files. */ if (read(fd, &c, 1) == 1) { (void)lseek(fd, 0, SEEK_SET); while (write(fd, &c, 1) == -1 && errno == EAGAIN) continue; } (void)close(fd); /* XXX: What about propagating the error? */ } /* * Touch the given target. Called by JobStart when the -t flag was given. * * The modification date of the file is changed. * If the file did not exist, it is created. */ void Job_Touch(GNode *gn, bool echo) { if (gn->type & (OP_JOIN | OP_USE | OP_USEBEFORE | OP_EXEC | OP_OPTIONAL | OP_SPECIAL | OP_PHONY)) { /* * These are "virtual" targets and should not really be * created. */ return; } if (echo || !GNode_ShouldExecute(gn)) { (void)fprintf(stdout, "touch %s\n", gn->name); (void)fflush(stdout); } if (!GNode_ShouldExecute(gn)) return; if (gn->type & OP_ARCHV) Arch_Touch(gn); else if (gn->type & OP_LIB) Arch_TouchLib(gn); else TouchRegular(gn); } /* * Make sure the given node has all the commands it needs. * * The node will have commands from the .DEFAULT rule added to it if it * needs them. * * Input: * gn The target whose commands need verifying * abortProc Function to abort with message * * Results: * true if the commands list is/was ok. */ bool Job_CheckCommands(GNode *gn, void (*abortProc)(const char *, ...)) { if (GNode_IsTarget(gn)) return true; if (!Lst_IsEmpty(&gn->commands)) return true; if ((gn->type & OP_LIB) && !Lst_IsEmpty(&gn->children)) return true; /* * No commands. Look for .DEFAULT rule from which we might infer * commands. */ if (defaultNode != NULL && !Lst_IsEmpty(&defaultNode->commands) && !(gn->type & OP_SPECIAL)) { /* * The traditional Make only looks for a .DEFAULT if the node * was never the target of an operator, so that's what we do * too. * * The .DEFAULT node acts like a transformation rule, in that * gn also inherits any attributes or sources attached to * .DEFAULT itself. */ Make_HandleUse(defaultNode, gn); Var_Set(gn, IMPSRC, GNode_VarTarget(gn)); return true; } Dir_UpdateMTime(gn, false); if (gn->mtime != 0 || (gn->type & OP_SPECIAL)) return true; /* * The node wasn't the target of an operator. We have no .DEFAULT * rule to go on and the target doesn't already exist. There's * nothing more we can do for this branch. If the -k flag wasn't * given, we stop in our tracks, otherwise we just don't update * this node's parents so they never get examined. */ - if (gn->flags & FROM_DEPEND) { + if (gn->flags.fromDepend) { if (!Job_RunTarget(".STALE", gn->fname)) fprintf(stdout, "%s: %s, %d: ignoring stale %s for %s\n", progname, gn->fname, gn->lineno, makeDependfile, gn->name); return true; } if (gn->type & OP_OPTIONAL) { (void)fprintf(stdout, "%s: don't know how to make %s (%s)\n", progname, gn->name, "ignored"); (void)fflush(stdout); return true; } if (opts.keepgoing) { (void)fprintf(stdout, "%s: don't know how to make %s (%s)\n", progname, gn->name, "continuing"); (void)fflush(stdout); return false; } abortProc("%s: don't know how to make %s. Stop", progname, gn->name); return false; } /* * Execute the shell for the given job. * * See Job_CatchOutput for handling the output of the shell. */ static void JobExec(Job *job, char **argv) { int cpid; /* ID of new child */ sigset_t mask; if (DEBUG(JOB)) { int i; debug_printf("Running %s\n", job->node->name); debug_printf("\tCommand: "); for (i = 0; argv[i] != NULL; i++) { debug_printf("%s ", argv[i]); } debug_printf("\n"); } /* * Some jobs produce no output and it's disconcerting to have * no feedback of their running (since they produce no output, the * banner with their name in it never appears). This is an attempt to * provide that feedback, even if nothing follows it. */ if (job->echo) SwitchOutputTo(job->node); /* No interruptions until this job is on the `jobs' list */ JobSigLock(&mask); /* Pre-emptively mark job running, pid still zero though */ job->status = JOB_ST_RUNNING; Var_ReexportVars(); cpid = vfork(); if (cpid == -1) Punt("Cannot vfork: %s", strerror(errno)); if (cpid == 0) { /* Child */ sigset_t tmask; #ifdef USE_META if (useMeta) { meta_job_child(job); } #endif /* * Reset all signal handlers; this is necessary because we * also need to unblock signals before we exec(2). */ JobSigReset(); /* Now unblock signals */ sigemptyset(&tmask); JobSigUnlock(&tmask); /* * Must duplicate the input stream down to the child's input * and reset it to the beginning (again). Since the stream * was marked close-on-exec, we must clear that bit in the * new input. */ if (dup2(fileno(job->cmdFILE), 0) == -1) execDie("dup2", "job->cmdFILE"); if (fcntl(0, F_SETFD, 0) == -1) execDie("fcntl clear close-on-exec", "stdin"); if (lseek(0, 0, SEEK_SET) == -1) execDie("lseek to 0", "stdin"); if (Always_pass_job_queue || (job->node->type & (OP_MAKE | OP_SUBMAKE))) { /* * Pass job token pipe to submakes. */ if (fcntl(tokenWaitJob.inPipe, F_SETFD, 0) == -1) execDie("clear close-on-exec", "tokenWaitJob.inPipe"); if (fcntl(tokenWaitJob.outPipe, F_SETFD, 0) == -1) execDie("clear close-on-exec", "tokenWaitJob.outPipe"); } /* * Set up the child's output to be routed through the pipe * we've created for it. */ if (dup2(job->outPipe, 1) == -1) execDie("dup2", "job->outPipe"); /* * The output channels are marked close on exec. This bit * was duplicated by the dup2(on some systems), so we have * to clear it before routing the shell's error output to * the same place as its standard output. */ if (fcntl(1, F_SETFD, 0) == -1) execDie("clear close-on-exec", "stdout"); if (dup2(1, 2) == -1) execDie("dup2", "1, 2"); /* * We want to switch the child into a different process * family so we can kill it and all its descendants in * one fell swoop, by killing its process family, but not * commit suicide. */ #if defined(HAVE_SETPGID) (void)setpgid(0, getpid()); #else # if defined(HAVE_SETSID) /* XXX: dsl - I'm sure this should be setpgrp()... */ (void)setsid(); # else (void)setpgrp(0, getpid()); # endif #endif (void)execv(shellPath, argv); execDie("exec", shellPath); } /* Parent, continuing after the child exec */ job->pid = cpid; Trace_Log(JOBSTART, job); #ifdef USE_META if (useMeta) { meta_job_parent(job, cpid); } #endif /* * Set the current position in the buffer to the beginning * and mark another stream to watch in the outputs mask */ job->curPos = 0; watchfd(job); if (job->cmdFILE != NULL && job->cmdFILE != stdout) { - (void)fclose(job->cmdFILE); + if (fclose(job->cmdFILE) != 0) + Punt("Cannot write shell script for '%s': %s", + job->node->name, strerror(errno)); job->cmdFILE = NULL; } /* Now that the job is actually running, add it to the table. */ if (DEBUG(JOB)) { debug_printf("JobExec(%s): pid %d added to jobs table\n", job->node->name, job->pid); DumpJobs("job started"); } JobSigUnlock(&mask); } /* Create the argv needed to execute the shell for a given job. */ static void JobMakeArgv(Job *job, char **argv) { int argc; static char args[10]; /* For merged arguments */ argv[0] = UNCONST(shellName); argc = 1; if ((shell->errFlag != NULL && shell->errFlag[0] != '-') || (shell->echoFlag != NULL && shell->echoFlag[0] != '-')) { /* * At least one of the flags doesn't have a minus before it, * so merge them together. Have to do this because the Bourne * shell thinks its second argument is a file to source. * Grrrr. Note the ten-character limitation on the combined * arguments. * * TODO: Research until when the above comments were * practically relevant. */ (void)snprintf(args, sizeof args, "-%s%s", (job->ignerr ? "" : (shell->errFlag != NULL ? shell->errFlag : "")), (!job->echo ? "" : (shell->echoFlag != NULL ? shell->echoFlag : ""))); if (args[1] != '\0') { argv[argc] = args; argc++; } } else { if (!job->ignerr && shell->errFlag != NULL) { argv[argc] = UNCONST(shell->errFlag); argc++; } if (job->echo && shell->echoFlag != NULL) { argv[argc] = UNCONST(shell->echoFlag); argc++; } } argv[argc] = NULL; } static void JobWriteShellCommands(Job *job, GNode *gn, bool *out_run) { /* * tfile is the name of a file into which all shell commands * are put. It is removed before the child shell is executed, * unless DEBUG(SCRIPT) is set. */ char tfile[MAXPATHLEN]; int tfd; /* File descriptor to the temp file */ tfd = Job_TempFile(TMPPAT, tfile, sizeof tfile); job->cmdFILE = fdopen(tfd, "w+"); if (job->cmdFILE == NULL) Punt("Could not fdopen %s", tfile); (void)fcntl(fileno(job->cmdFILE), F_SETFD, FD_CLOEXEC); #ifdef USE_META if (useMeta) { meta_job_start(job, gn); if (gn->type & OP_SILENT) /* might have changed */ job->echo = false; } #endif *out_run = JobWriteCommands(job); } /* * Start a target-creation process going for the target described by gn. * * Results: * JOB_ERROR if there was an error in the commands, JOB_FINISHED * if there isn't actually anything left to do for the job and * JOB_RUNNING if the job has been started. * * Details: * A new Job node is created and added to the list of running * jobs. PMake is forked and a child shell created. * * NB: The return value is ignored by everyone. */ static JobStartResult JobStart(GNode *gn, bool special) { Job *job; /* new job descriptor */ char *argv[10]; /* Argument vector to shell */ bool cmdsOK; /* true if the nodes commands were all right */ bool run; for (job = job_table; job < job_table_end; job++) { if (job->status == JOB_ST_FREE) break; } if (job >= job_table_end) Punt("JobStart no job slots vacant"); memset(job, 0, sizeof *job); job->node = gn; job->tailCmds = NULL; job->status = JOB_ST_SET_UP; job->special = special || gn->type & OP_SPECIAL; job->ignerr = opts.ignoreErrors || gn->type & OP_IGNORE; job->echo = !(opts.beSilent || gn->type & OP_SILENT); /* * Check the commands now so any attributes from .DEFAULT have a * chance to migrate to the node. */ cmdsOK = Job_CheckCommands(gn, Error); job->inPollfd = NULL; if (Lst_IsEmpty(&gn->commands)) { job->cmdFILE = stdout; run = false; /* * We're serious here, but if the commands were bogus, we're * also dead... */ if (!cmdsOK) { PrintOnError(gn, NULL); /* provide some clue */ DieHorribly(); } } else if (((gn->type & OP_MAKE) && !opts.noRecursiveExecute) || (!opts.noExecute && !opts.touchFlag)) { /* * The above condition looks very similar to * GNode_ShouldExecute but is subtly different. It prevents * that .MAKE targets are touched since these are usually * virtual targets. */ /* * We're serious here, but if the commands were bogus, we're * also dead... */ if (!cmdsOK) { PrintOnError(gn, NULL); /* provide some clue */ DieHorribly(); } JobWriteShellCommands(job, gn, &run); (void)fflush(job->cmdFILE); } else if (!GNode_ShouldExecute(gn)) { /* * Just write all the commands to stdout in one fell swoop. * This still sets up job->tailCmds correctly. */ SwitchOutputTo(gn); job->cmdFILE = stdout; if (cmdsOK) JobWriteCommands(job); run = false; (void)fflush(job->cmdFILE); } else { Job_Touch(gn, job->echo); run = false; } /* If we're not supposed to execute a shell, don't. */ if (!run) { if (!job->special) Job_TokenReturn(); /* Unlink and close the command file if we opened one */ if (job->cmdFILE != NULL && job->cmdFILE != stdout) { (void)fclose(job->cmdFILE); job->cmdFILE = NULL; } /* * We only want to work our way up the graph if we aren't * here because the commands for the job were no good. */ if (cmdsOK && aborting == ABORT_NONE) { JobSaveCommands(job); job->node->made = MADE; Make_Update(job->node); } job->status = JOB_ST_FREE; return cmdsOK ? JOB_FINISHED : JOB_ERROR; } /* * Set up the control arguments to the shell. This is based on the * flags set earlier for this job. */ JobMakeArgv(job, argv); /* Create the pipe by which we'll get the shell's output. */ JobCreatePipe(job, 3); JobExec(job, argv); return JOB_RUNNING; } /* * If the shell has an output filter (which only csh and ksh have by default), * print the output of the child process, skipping the noPrint text of the * shell. * * Return the part of the output that the calling function needs to output by * itself. */ static char * PrintFilteredOutput(char *cp, char *endp) /* XXX: should all be const */ { char *ecp; /* XXX: should be const */ if (shell->noPrint == NULL || shell->noPrint[0] == '\0') return cp; /* * XXX: What happens if shell->noPrint occurs on the boundary of * the buffer? To work correctly in all cases, this should rather * be a proper stream filter instead of doing string matching on * selected chunks of the output. */ while ((ecp = strstr(cp, shell->noPrint)) != NULL) { if (ecp != cp) { *ecp = '\0'; /* XXX: avoid writing to the buffer */ /* * The only way there wouldn't be a newline after * this line is if it were the last in the buffer. * however, since the noPrint output comes after it, * there must be a newline, so we don't print one. */ /* XXX: What about null bytes in the output? */ (void)fprintf(stdout, "%s", cp); (void)fflush(stdout); } cp = ecp + shell->noPrintLen; if (cp == endp) break; cp++; /* skip over the (XXX: assumed) newline */ pp_skip_whitespace(&cp); } return cp; } /* * This function is called whenever there is something to read on the pipe. * We collect more output from the given job and store it in the job's * outBuf. If this makes up a line, we print it tagged by the job's * identifier, as necessary. * * In the output of the shell, the 'noPrint' lines are removed. If the * command is not alone on the line (the character after it is not \0 or * \n), we do print whatever follows it. * * Input: * job the job whose output needs printing * finish true if this is the last time we'll be called * for this job */ static void CollectOutput(Job *job, bool finish) { bool gotNL; /* true if got a newline */ bool fbuf; /* true if our buffer filled up */ size_t nr; /* number of bytes read */ size_t i; /* auxiliary index into outBuf */ size_t max; /* limit for i (end of current data) */ ssize_t nRead; /* (Temporary) number of bytes read */ /* Read as many bytes as will fit in the buffer. */ again: gotNL = false; fbuf = false; nRead = read(job->inPipe, &job->outBuf[job->curPos], JOB_BUFSIZE - job->curPos); if (nRead < 0) { if (errno == EAGAIN) return; if (DEBUG(JOB)) { perror("CollectOutput(piperead)"); } nr = 0; } else { nr = (size_t)nRead; } /* * If we hit the end-of-file (the job is dead), we must flush its * remaining output, so pretend we read a newline if there's any * output remaining in the buffer. * Also clear the 'finish' flag so we stop looping. */ if (nr == 0 && job->curPos != 0) { job->outBuf[job->curPos] = '\n'; nr = 1; finish = false; } else if (nr == 0) { finish = false; } /* * Look for the last newline in the bytes we just got. If there is * one, break out of the loop with 'i' as its index and gotNL set * true. */ max = job->curPos + nr; for (i = job->curPos + nr - 1; i >= job->curPos && i != (size_t)-1; i--) { if (job->outBuf[i] == '\n') { gotNL = true; break; } else if (job->outBuf[i] == '\0') { /* * FIXME: The null characters are only replaced with * space _after_ the last '\n'. Everywhere else they * hide the rest of the command output. */ job->outBuf[i] = ' '; } } if (!gotNL) { job->curPos += nr; if (job->curPos == JOB_BUFSIZE) { /* * If we've run out of buffer space, we have no choice * but to print the stuff. sigh. */ fbuf = true; i = job->curPos; } } if (gotNL || fbuf) { /* * Need to send the output to the screen. Null terminate it * first, overwriting the newline character if there was one. * So long as the line isn't one we should filter (according * to the shell description), we print the line, preceded * by a target banner if this target isn't the same as the * one for which we last printed something. * The rest of the data in the buffer are then shifted down * to the start of the buffer and curPos is set accordingly. */ job->outBuf[i] = '\0'; if (i >= job->curPos) { char *cp; /* * FIXME: SwitchOutputTo should be here, according to * the comment above. But since PrintOutput does not * do anything in the default shell, this bug has gone * unnoticed until now. */ cp = PrintFilteredOutput(job->outBuf, &job->outBuf[i]); /* * There's still more in the output buffer. This time, * though, we know there's no newline at the end, so * we add one of our own free will. */ if (*cp != '\0') { if (!opts.beSilent) SwitchOutputTo(job->node); #ifdef USE_META if (useMeta) { meta_job_output(job, cp, gotNL ? "\n" : ""); } #endif (void)fprintf(stdout, "%s%s", cp, gotNL ? "\n" : ""); (void)fflush(stdout); } } /* * max is the last offset still in the buffer. Move any * remaining characters to the start of the buffer and * update the end marker curPos. */ if (i < max) { (void)memmove(job->outBuf, &job->outBuf[i + 1], max - (i + 1)); job->curPos = max - (i + 1); } else { assert(i == max); job->curPos = 0; } } if (finish) { /* * If the finish flag is true, we must loop until we hit * end-of-file on the pipe. This is guaranteed to happen * eventually since the other end of the pipe is now closed * (we closed it explicitly and the child has exited). When * we do get an EOF, finish will be set false and we'll fall * through and out. */ goto again; } } static void JobRun(GNode *targ) { #if 0 /* * Unfortunately it is too complicated to run .BEGIN, .END, and * .INTERRUPT job in the parallel job module. As of 2020-09-25, * unit-tests/deptgt-end-jobs.mk hangs in an endless loop. * * Running these jobs in compat mode also guarantees that these * jobs do not overlap with other unrelated jobs. */ GNodeList lst = LST_INIT; Lst_Append(&lst, targ); (void)Make_Run(&lst); Lst_Done(&lst); JobStart(targ, true); while (jobTokensRunning != 0) { Job_CatchOutput(); } #else Compat_Make(targ, targ); /* XXX: Replace with GNode_IsError(gn) */ if (targ->made == ERROR) { PrintOnError(targ, "\n\nStop."); exit(1); } #endif } /* * Handle the exit of a child. Called from Make_Make. * * The job descriptor is removed from the list of children. * * Notes: * We do waits, blocking or not, according to the wisdom of our * caller, until there are no more children to report. For each * job, call JobFinish to finish things off. */ void Job_CatchChildren(void) { int pid; /* pid of dead child */ WAIT_T status; /* Exit/termination status */ /* Don't even bother if we know there's no one around. */ if (jobTokensRunning == 0) return; /* Have we received SIGCHLD since last call? */ if (caught_sigchld == 0) return; caught_sigchld = 0; while ((pid = waitpid((pid_t)-1, &status, WNOHANG | WUNTRACED)) > 0) { DEBUG2(JOB, "Process %d exited/stopped status %x.\n", pid, WAIT_STATUS(status)); JobReapChild(pid, status, true); } } /* * It is possible that wait[pid]() was called from elsewhere, * this lets us reap jobs regardless. */ void JobReapChild(pid_t pid, WAIT_T status, bool isJobs) { Job *job; /* job descriptor for dead child */ /* Don't even bother if we know there's no one around. */ if (jobTokensRunning == 0) return; job = JobFindPid(pid, JOB_ST_RUNNING, isJobs); if (job == NULL) { if (isJobs) { if (!lurking_children) Error("Child (%d) status %x not in table?", pid, status); } return; /* not ours */ } if (WIFSTOPPED(status)) { DEBUG2(JOB, "Process %d (%s) stopped.\n", job->pid, job->node->name); if (!make_suspended) { switch (WSTOPSIG(status)) { case SIGTSTP: (void)printf("*** [%s] Suspended\n", job->node->name); break; case SIGSTOP: (void)printf("*** [%s] Stopped\n", job->node->name); break; default: (void)printf("*** [%s] Stopped -- signal %d\n", job->node->name, WSTOPSIG(status)); } job->suspended = true; } (void)fflush(stdout); return; } job->status = JOB_ST_FINISHED; job->exit_status = WAIT_STATUS(status); JobFinish(job, status); } /* * Catch the output from our children, if we're using pipes do so. Otherwise * just block time until we get a signal(most likely a SIGCHLD) since there's * no point in just spinning when there's nothing to do and the reaping of a * child can wait for a while. */ void Job_CatchOutput(void) { int nready; Job *job; unsigned int i; (void)fflush(stdout); /* The first fd in the list is the job token pipe */ do { nready = poll(fds + 1 - wantToken, fdsLen - 1 + wantToken, POLL_MSEC); } while (nready < 0 && errno == EINTR); if (nready < 0) Punt("poll: %s", strerror(errno)); if (nready > 0 && readyfd(&childExitJob)) { char token = 0; ssize_t count; count = read(childExitJob.inPipe, &token, 1); if (count == 1) { if (token == DO_JOB_RESUME[0]) /* * Complete relay requested from our SIGCONT * handler */ JobRestartJobs(); } else if (count == 0) Punt("unexpected eof on token pipe"); - else + else if (errno != EAGAIN) Punt("token pipe read: %s", strerror(errno)); nready--; } Job_CatchChildren(); if (nready == 0) return; for (i = npseudojobs * nfds_per_job(); i < fdsLen; i++) { if (fds[i].revents == 0) continue; job = jobByFdIndex[i]; if (job->status == JOB_ST_RUNNING) CollectOutput(job, false); #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) /* * With meta mode, we may have activity on the job's filemon * descriptor too, which at the moment is any pollfd other * than job->inPollfd. */ if (useMeta && job->inPollfd != &fds[i]) { if (meta_job_event(job) <= 0) { fds[i].events = 0; /* never mind */ } } #endif if (--nready == 0) return; } } /* * Start the creation of a target. Basically a front-end for JobStart used by * the Make module. */ void Job_Make(GNode *gn) { (void)JobStart(gn, false); } static void InitShellNameAndPath(void) { shellName = shell->name; #ifdef DEFSHELL_CUSTOM if (shellName[0] == '/') { shellPath = shellName; shellName = str_basename(shellPath); return; } #endif - +#ifdef DEFSHELL_PATH + shellPath = DEFSHELL_PATH; +#else shellPath = str_concat3(_PATH_DEFSHELLDIR, "/", shellName); +#endif } void Shell_Init(void) { if (shellPath == NULL) InitShellNameAndPath(); Var_SetWithFlags(SCOPE_CMDLINE, ".SHELL", shellPath, VAR_SET_READONLY); if (shell->errFlag == NULL) shell->errFlag = ""; if (shell->echoFlag == NULL) shell->echoFlag = ""; if (shell->hasErrCtl && shell->errFlag[0] != '\0') { if (shellErrFlag != NULL && strcmp(shell->errFlag, &shellErrFlag[1]) != 0) { free(shellErrFlag); shellErrFlag = NULL; } if (shellErrFlag == NULL) { size_t n = strlen(shell->errFlag) + 2; shellErrFlag = bmake_malloc(n); if (shellErrFlag != NULL) snprintf(shellErrFlag, n, "-%s", shell->errFlag); } } else if (shellErrFlag != NULL) { free(shellErrFlag); shellErrFlag = NULL; } } /* * Return the string literal that is used in the current command shell * to produce a newline character. */ const char * Shell_GetNewline(void) { return shell->newline; } void Job_SetPrefix(void) { if (targPrefix != NULL) { free(targPrefix); } else if (!Var_Exists(SCOPE_GLOBAL, MAKE_JOB_PREFIX)) { Global_Set(MAKE_JOB_PREFIX, "---"); } (void)Var_Subst("${" MAKE_JOB_PREFIX "}", SCOPE_GLOBAL, VARE_WANTRES, &targPrefix); /* TODO: handle errors */ } static void AddSig(int sig, SignalProc handler) { if (bmake_signal(sig, SIG_IGN) != SIG_IGN) { sigaddset(&caught_signals, sig); (void)bmake_signal(sig, handler); } } /* Initialize the process module. */ void Job_Init(void) { Job_SetPrefix(); /* Allocate space for all the job info */ job_table = bmake_malloc((size_t)opts.maxJobs * sizeof *job_table); memset(job_table, 0, (size_t)opts.maxJobs * sizeof *job_table); job_table_end = job_table + opts.maxJobs; wantToken = 0; caught_sigchld = 0; aborting = ABORT_NONE; job_errors = 0; Always_pass_job_queue = GetBooleanExpr(MAKE_ALWAYS_PASS_JOB_QUEUE, Always_pass_job_queue); Job_error_token = GetBooleanExpr(MAKE_JOB_ERROR_TOKEN, Job_error_token); /* * There is a non-zero chance that we already have children. * eg after 'make -f- < 0) continue; if (rval == 0) lurking_children = true; break; } Shell_Init(); JobCreatePipe(&childExitJob, 3); { /* Preallocate enough for the maximum number of jobs. */ size_t nfds = (npseudojobs + (size_t)opts.maxJobs) * nfds_per_job(); fds = bmake_malloc(sizeof *fds * nfds); jobByFdIndex = bmake_malloc(sizeof *jobByFdIndex * nfds); } /* These are permanent entries and take slots 0 and 1 */ watchfd(&tokenWaitJob); watchfd(&childExitJob); sigemptyset(&caught_signals); /* * Install a SIGCHLD handler. */ (void)bmake_signal(SIGCHLD, JobChildSig); sigaddset(&caught_signals, SIGCHLD); /* * Catch the four signals that POSIX specifies if they aren't ignored. * JobPassSig will take care of calling JobInterrupt if appropriate. */ AddSig(SIGINT, JobPassSig_int); AddSig(SIGHUP, JobPassSig_term); AddSig(SIGTERM, JobPassSig_term); AddSig(SIGQUIT, JobPassSig_term); /* * There are additional signals that need to be caught and passed if * either the export system wants to be told directly of signals or if * we're giving each job its own process group (since then it won't get * signals from the terminal driver as we own the terminal) */ AddSig(SIGTSTP, JobPassSig_suspend); AddSig(SIGTTOU, JobPassSig_suspend); AddSig(SIGTTIN, JobPassSig_suspend); AddSig(SIGWINCH, JobCondPassSig); AddSig(SIGCONT, JobContinueSig); (void)Job_RunTarget(".BEGIN", NULL); /* Create the .END node now, even though no code in the unit tests * depends on it. See also Targ_GetEndNode in Compat_Run. */ (void)Targ_GetEndNode(); } static void DelSig(int sig) { if (sigismember(&caught_signals, sig) != 0) (void)bmake_signal(sig, SIG_DFL); } static void JobSigReset(void) { DelSig(SIGINT); DelSig(SIGHUP); DelSig(SIGQUIT); DelSig(SIGTERM); DelSig(SIGTSTP); DelSig(SIGTTOU); DelSig(SIGTTIN); DelSig(SIGWINCH); DelSig(SIGCONT); (void)bmake_signal(SIGCHLD, SIG_DFL); } /* Find a shell in 'shells' given its name, or return NULL. */ static Shell * FindShellByName(const char *name) { Shell *sh = shells; const Shell *shellsEnd = sh + sizeof shells / sizeof shells[0]; for (sh = shells; sh < shellsEnd; sh++) { if (strcmp(name, sh->name) == 0) return sh; } return NULL; } /* * Parse a shell specification and set up 'shell', shellPath and * shellName appropriately. * * Input: * line The shell spec * * Results: * false if the specification was incorrect. * * Side Effects: * 'shell' points to a Shell structure (either predefined or * created from the shell spec), shellPath is the full path of the * shell described by 'shell', while shellName is just the * final component of shellPath. * * Notes: * A shell specification consists of a .SHELL target, with dependency * operator, followed by a series of blank-separated words. Double * quotes can be used to use blanks in words. A backslash escapes * anything (most notably a double-quote and a space) and * provides the functionality it does in C. Each word consists of * keyword and value separated by an equal sign. There should be no * unnecessary spaces in the word. The keywords are as follows: * name Name of shell. * path Location of shell. * quiet Command to turn off echoing. * echo Command to turn echoing on * filter Result of turning off echoing that shouldn't be * printed. * echoFlag Flag to turn echoing on at the start * errFlag Flag to turn error checking on at the start * hasErrCtl True if shell has error checking control * newline String literal to represent a newline char * check Command to turn on error checking if hasErrCtl * is true or template of command to echo a command * for which error checking is off if hasErrCtl is * false. * ignore Command to turn off error checking if hasErrCtl * is true or template of command to execute a * command so as to ignore any errors it returns if * hasErrCtl is false. */ bool Job_ParseShell(char *line) { Words wordsList; char **words; char **argv; size_t argc; char *path; Shell newShell; bool fullSpec = false; Shell *sh; /* XXX: don't use line as an iterator variable */ pp_skip_whitespace(&line); free(shell_freeIt); memset(&newShell, 0, sizeof newShell); /* * Parse the specification by keyword */ wordsList = Str_Words(line, true); words = wordsList.words; argc = wordsList.len; path = wordsList.freeIt; if (words == NULL) { Error("Unterminated quoted string [%s]", line); return false; } shell_freeIt = path; for (path = NULL, argv = words; argc != 0; argc--, argv++) { char *arg = *argv; if (strncmp(arg, "path=", 5) == 0) { path = arg + 5; } else if (strncmp(arg, "name=", 5) == 0) { newShell.name = arg + 5; } else { if (strncmp(arg, "quiet=", 6) == 0) { newShell.echoOff = arg + 6; } else if (strncmp(arg, "echo=", 5) == 0) { newShell.echoOn = arg + 5; } else if (strncmp(arg, "filter=", 7) == 0) { newShell.noPrint = arg + 7; newShell.noPrintLen = strlen(newShell.noPrint); } else if (strncmp(arg, "echoFlag=", 9) == 0) { newShell.echoFlag = arg + 9; } else if (strncmp(arg, "errFlag=", 8) == 0) { newShell.errFlag = arg + 8; } else if (strncmp(arg, "hasErrCtl=", 10) == 0) { char c = arg[10]; newShell.hasErrCtl = c == 'Y' || c == 'y' || c == 'T' || c == 't'; } else if (strncmp(arg, "newline=", 8) == 0) { newShell.newline = arg + 8; } else if (strncmp(arg, "check=", 6) == 0) { /* Before 2020-12-10, these two variables * had been a single variable. */ newShell.errOn = arg + 6; newShell.echoTmpl = arg + 6; } else if (strncmp(arg, "ignore=", 7) == 0) { /* Before 2020-12-10, these two variables * had been a single variable. */ newShell.errOff = arg + 7; newShell.runIgnTmpl = arg + 7; } else if (strncmp(arg, "errout=", 7) == 0) { newShell.runChkTmpl = arg + 7; } else if (strncmp(arg, "comment=", 8) == 0) { newShell.commentChar = arg[8]; } else { Parse_Error(PARSE_FATAL, "Unknown keyword \"%s\"", arg); free(words); return false; } fullSpec = true; } } if (path == NULL) { /* * If no path was given, the user wants one of the * pre-defined shells, yes? So we find the one s/he wants * with the help of FindShellByName and set things up the * right way. shellPath will be set up by Shell_Init. */ if (newShell.name == NULL) { Parse_Error(PARSE_FATAL, "Neither path nor name specified"); free(words); return false; } else { if ((sh = FindShellByName(newShell.name)) == NULL) { Parse_Error(PARSE_WARNING, "%s: No matching shell", newShell.name); free(words); return false; } shell = sh; shellName = newShell.name; if (shellPath != NULL) { /* * Shell_Init has already been called! * Do it again. */ free(UNCONST(shellPath)); shellPath = NULL; Shell_Init(); } } } else { /* * The user provided a path. If s/he gave nothing else * (fullSpec is false), try and find a matching shell in the * ones we know of. Else we just take the specification at * its word and copy it to a new location. In either case, * we need to record the path the user gave for the shell. */ shellPath = path; path = strrchr(path, '/'); if (path == NULL) { path = UNCONST(shellPath); } else { path++; } if (newShell.name != NULL) { shellName = newShell.name; } else { shellName = path; } if (!fullSpec) { if ((sh = FindShellByName(shellName)) == NULL) { Parse_Error(PARSE_WARNING, "%s: No matching shell", shellName); free(words); return false; } shell = sh; } else { shell = bmake_malloc(sizeof *shell); *shell = newShell; } /* this will take care of shellErrFlag */ Shell_Init(); } if (shell->echoOn != NULL && shell->echoOff != NULL) shell->hasEchoCtl = true; if (!shell->hasErrCtl) { if (shell->echoTmpl == NULL) shell->echoTmpl = ""; if (shell->runIgnTmpl == NULL) shell->runIgnTmpl = "%s\n"; } /* * Do not free up the words themselves, since they might be in use * by the shell specification. */ free(words); return true; } /* * Handle the receipt of an interrupt. * * All children are killed. Another job will be started if the .INTERRUPT * target is defined. * * Input: * runINTERRUPT Non-zero if commands for the .INTERRUPT target * should be executed * signo signal received */ static void JobInterrupt(bool runINTERRUPT, int signo) { Job *job; /* job descriptor in that element */ GNode *interrupt; /* the node describing the .INTERRUPT target */ sigset_t mask; GNode *gn; aborting = ABORT_INTERRUPT; JobSigLock(&mask); for (job = job_table; job < job_table_end; job++) { if (job->status != JOB_ST_RUNNING) continue; gn = job->node; JobDeleteTarget(gn); if (job->pid != 0) { DEBUG2(JOB, "JobInterrupt passing signal %d to child %d.\n", signo, job->pid); KILLPG(job->pid, signo); } } JobSigUnlock(&mask); if (runINTERRUPT && !opts.touchFlag) { interrupt = Targ_FindNode(".INTERRUPT"); if (interrupt != NULL) { opts.ignoreErrors = false; JobRun(interrupt); } } Trace_Log(MAKEINTR, NULL); exit(signo); /* XXX: why signo? */ } /* * Do the final processing, i.e. run the commands attached to the .END target. * * Return the number of errors reported. */ int Job_Finish(void) { GNode *endNode = Targ_GetEndNode(); if (!Lst_IsEmpty(&endNode->commands) || !Lst_IsEmpty(&endNode->children)) { if (job_errors != 0) { Error("Errors reported so .END ignored"); } else { JobRun(endNode); } } return job_errors; } /* Clean up any memory used by the jobs module. */ void Job_End(void) { #ifdef CLEANUP free(shell_freeIt); #endif } /* * Waits for all running jobs to finish and returns. * Sets 'aborting' to ABORT_WAIT to prevent other jobs from starting. */ void Job_Wait(void) { aborting = ABORT_WAIT; while (jobTokensRunning != 0) { Job_CatchOutput(); } aborting = ABORT_NONE; } /* * Abort all currently running jobs without handling output or anything. * This function is to be called only in the event of a major error. * Most definitely NOT to be called from JobInterrupt. * * All children are killed, not just the firstborn. */ void Job_AbortAll(void) { Job *job; /* the job descriptor in that element */ WAIT_T foo; aborting = ABORT_ERROR; if (jobTokensRunning != 0) { for (job = job_table; job < job_table_end; job++) { if (job->status != JOB_ST_RUNNING) continue; /* * kill the child process with increasingly drastic * signals to make darn sure it's dead. */ KILLPG(job->pid, SIGINT); KILLPG(job->pid, SIGKILL); } } /* * Catch as many children as want to report in at first, then give up */ while (waitpid((pid_t)-1, &foo, WNOHANG) > 0) continue; } /* * Tries to restart stopped jobs if there are slots available. * Called in process context in response to a SIGCONT. */ static void JobRestartJobs(void) { Job *job; for (job = job_table; job < job_table_end; job++) { if (job->status == JOB_ST_RUNNING && (make_suspended || job->suspended)) { DEBUG1(JOB, "Restarting stopped job pid %d.\n", job->pid); if (job->suspended) { (void)printf("*** [%s] Continued\n", job->node->name); (void)fflush(stdout); } job->suspended = false; if (KILLPG(job->pid, SIGCONT) != 0 && DEBUG(JOB)) { debug_printf("Failed to send SIGCONT to %d\n", job->pid); } } if (job->status == JOB_ST_FINISHED) { /* * Job exit deferred after calling waitpid() in a * signal handler */ JobFinish(job, job->exit_status); } } make_suspended = false; } static void watchfd(Job *job) { if (job->inPollfd != NULL) Punt("Watching watched job"); fds[fdsLen].fd = job->inPipe; fds[fdsLen].events = POLLIN; jobByFdIndex[fdsLen] = job; job->inPollfd = &fds[fdsLen]; fdsLen++; #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) if (useMeta) { fds[fdsLen].fd = meta_job_fd(job); fds[fdsLen].events = fds[fdsLen].fd == -1 ? 0 : POLLIN; jobByFdIndex[fdsLen] = job; fdsLen++; } #endif } static void clearfd(Job *job) { size_t i; if (job->inPollfd == NULL) Punt("Unwatching unwatched job"); i = (size_t)(job->inPollfd - fds); fdsLen--; #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) if (useMeta) { /* * Sanity check: there should be two fds per job, so the job's * pollfd number should be even. */ assert(nfds_per_job() == 2); if (i % 2 != 0) Punt("odd-numbered fd with meta"); fdsLen--; } #endif /* * Move last job in table into hole made by dead job. */ if (fdsLen != i) { fds[i] = fds[fdsLen]; jobByFdIndex[i] = jobByFdIndex[fdsLen]; jobByFdIndex[i]->inPollfd = &fds[i]; #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) if (useMeta) { fds[i + 1] = fds[fdsLen + 1]; jobByFdIndex[i + 1] = jobByFdIndex[fdsLen + 1]; } #endif } job->inPollfd = NULL; } static bool readyfd(Job *job) { if (job->inPollfd == NULL) Punt("Polling unwatched job"); return (job->inPollfd->revents & POLLIN) != 0; } /* * Put a token (back) into the job pipe. * This allows a make process to start a build job. */ static void JobTokenAdd(void) { char tok = JOB_TOKENS[aborting], tok1; if (!Job_error_token && aborting == ABORT_ERROR) { if (jobTokensRunning == 0) return; tok = '+'; /* no error token */ } /* If we are depositing an error token flush everything else */ while (tok != '+' && read(tokenWaitJob.inPipe, &tok1, 1) == 1) continue; DEBUG3(JOB, "(%d) aborting %d, deposit token %c\n", getpid(), aborting, tok); while (write(tokenWaitJob.outPipe, &tok, 1) == -1 && errno == EAGAIN) continue; } /* Get a temp file */ int Job_TempFile(const char *pattern, char *tfile, size_t tfile_sz) { int fd; sigset_t mask; JobSigLock(&mask); fd = mkTempFile(pattern, tfile, tfile_sz); if (tfile != NULL && !DEBUG(SCRIPT)) unlink(tfile); JobSigUnlock(&mask); return fd; } /* Prep the job token pipe in the root make process. */ void Job_ServerStart(int max_tokens, int jp_0, int jp_1) { int i; char jobarg[64]; if (jp_0 >= 0 && jp_1 >= 0) { /* Pipe passed in from parent */ tokenWaitJob.inPipe = jp_0; tokenWaitJob.outPipe = jp_1; (void)fcntl(jp_0, F_SETFD, FD_CLOEXEC); (void)fcntl(jp_1, F_SETFD, FD_CLOEXEC); return; } JobCreatePipe(&tokenWaitJob, 15); snprintf(jobarg, sizeof jobarg, "%d,%d", tokenWaitJob.inPipe, tokenWaitJob.outPipe); Global_Append(MAKEFLAGS, "-J"); Global_Append(MAKEFLAGS, jobarg); /* * Preload the job pipe with one token per job, save the one * "extra" token for the primary job. * * XXX should clip maxJobs against PIPE_BUF -- if max_tokens is * larger than the write buffer size of the pipe, we will * deadlock here. */ for (i = 1; i < max_tokens; i++) JobTokenAdd(); } /* Return a withdrawn token to the pool. */ void Job_TokenReturn(void) { jobTokensRunning--; if (jobTokensRunning < 0) Punt("token botch"); if (jobTokensRunning != 0 || JOB_TOKENS[aborting] != '+') JobTokenAdd(); } /* * Attempt to withdraw a token from the pool. * * If pool is empty, set wantToken so that we wake up when a token is * released. * * Returns true if a token was withdrawn, and false if the pool is currently * empty. */ bool Job_TokenWithdraw(void) { char tok, tok1; ssize_t count; wantToken = 0; DEBUG3(JOB, "Job_TokenWithdraw(%d): aborting %d, running %d\n", getpid(), aborting, jobTokensRunning); if (aborting != ABORT_NONE || (jobTokensRunning >= opts.maxJobs)) return false; count = read(tokenWaitJob.inPipe, &tok, 1); if (count == 0) Fatal("eof on job pipe!"); if (count < 0 && jobTokensRunning != 0) { if (errno != EAGAIN) { Fatal("job pipe read: %s", strerror(errno)); } DEBUG1(JOB, "(%d) blocked for token\n", getpid()); wantToken = 1; return false; } if (count == 1 && tok != '+') { /* make being aborted - remove any other job tokens */ DEBUG2(JOB, "(%d) aborted by token %c\n", getpid(), tok); while (read(tokenWaitJob.inPipe, &tok1, 1) == 1) continue; /* And put the stopper back */ while (write(tokenWaitJob.outPipe, &tok, 1) == -1 && errno == EAGAIN) continue; if (shouldDieQuietly(NULL, 1)) exit(6); /* we aborted */ Fatal("A failure has been detected " "in another branch of the parallel make"); } if (count == 1 && jobTokensRunning == 0) /* We didn't want the token really */ while (write(tokenWaitJob.outPipe, &tok, 1) == -1 && errno == EAGAIN) continue; jobTokensRunning++; DEBUG1(JOB, "(%d) withdrew token\n", getpid()); return true; } /* * Run the named target if found. If a filename is specified, then set that * to the sources. * * Exits if the target fails. */ bool Job_RunTarget(const char *target, const char *fname) { GNode *gn = Targ_FindNode(target); if (gn == NULL) return false; if (fname != NULL) Var_Set(gn, ALLSRC, fname); JobRun(gn); /* XXX: Replace with GNode_IsError(gn) */ if (gn->made == ERROR) { PrintOnError(gn, "\n\nStop."); exit(1); } return true; } #ifdef USE_SELECT int emul_poll(struct pollfd *fd, int nfd, int timeout) { fd_set rfds, wfds; int i, maxfd, nselect, npoll; struct timeval tv, *tvp; long usecs; FD_ZERO(&rfds); FD_ZERO(&wfds); maxfd = -1; for (i = 0; i < nfd; i++) { fd[i].revents = 0; if (fd[i].events & POLLIN) FD_SET(fd[i].fd, &rfds); if (fd[i].events & POLLOUT) FD_SET(fd[i].fd, &wfds); if (fd[i].fd > maxfd) maxfd = fd[i].fd; } if (maxfd >= FD_SETSIZE) { Punt("Ran out of fd_set slots; " "recompile with a larger FD_SETSIZE."); } if (timeout < 0) { tvp = NULL; } else { usecs = timeout * 1000; tv.tv_sec = usecs / 1000000; tv.tv_usec = usecs % 1000000; tvp = &tv; } nselect = select(maxfd + 1, &rfds, &wfds, NULL, tvp); if (nselect <= 0) return nselect; npoll = 0; for (i = 0; i < nfd; i++) { if (FD_ISSET(fd[i].fd, &rfds)) fd[i].revents |= POLLIN; if (FD_ISSET(fd[i].fd, &wfds)) fd[i].revents |= POLLOUT; if (fd[i].revents) npoll++; } return npoll; } #endif /* USE_SELECT */ diff --git a/contrib/bmake/lst.h b/contrib/bmake/lst.h index cddd6439f611..02f1ae9ec38c 100644 --- a/contrib/bmake/lst.h +++ b/contrib/bmake/lst.h @@ -1,205 +1,205 @@ -/* $NetBSD: lst.h,v 1.98 2021/04/03 11:08:40 rillig Exp $ */ +/* $NetBSD: lst.h,v 1.99 2021/12/05 10:11:31 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)lst.h 8.1 (Berkeley) 6/6/93 */ /* * Copyright (c) 1988, 1989 by Adam de Boor * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)lst.h 8.1 (Berkeley) 6/6/93 */ /* Doubly-linked lists of arbitrary pointers. */ #ifndef MAKE_LST_H #define MAKE_LST_H #ifdef HAVE_INTTYPES_H #include #elif defined(HAVE_STDINT_H) #include #endif #ifdef HAVE_STDLIB_H #include #endif /* A doubly-linked list of pointers. */ typedef struct List List; /* A single node in the doubly-linked list. */ typedef struct ListNode ListNode; struct ListNode { ListNode *prev; /* previous node in list, or NULL */ ListNode *next; /* next node in list, or NULL */ void *datum; /* datum associated with this element */ }; struct List { ListNode *first; ListNode *last; }; /* Free the datum of a node, called before freeing the node itself. */ typedef void LstFreeProc(void *); /* Create or destroy a list */ /* Create a new list. */ List *Lst_New(void); /* Free the list nodes, but not the list itself. */ void Lst_Done(List *); /* Free the list nodes, freeing the node data using the given function. */ void Lst_DoneCall(List *, LstFreeProc); /* Free the list, leaving the node data unmodified. */ void Lst_Free(List *); #define LST_INIT { NULL, NULL } /* Initialize a list, without memory allocation. */ MAKE_INLINE void Lst_Init(List *list) { list->first = NULL; list->last = NULL; } /* Get information about a list */ MAKE_INLINE bool Lst_IsEmpty(List *list) { return list->first == NULL; } /* Find the first node that contains the given datum, or NULL. */ ListNode *Lst_FindDatum(List *, const void *); /* Modify a list */ /* Insert a datum before the given node. */ void Lst_InsertBefore(List *, ListNode *, void *); -/* Place a datum at the front of the list. */ +/* Add a datum at the front of the list. */ void Lst_Prepend(List *, void *); -/* Place a datum at the end of the list. */ +/* Add a datum at the end of the list. */ void Lst_Append(List *, void *); /* Remove the node from the list. */ void Lst_Remove(List *, ListNode *); void Lst_PrependAll(List *, List *); void Lst_AppendAll(List *, List *); void Lst_MoveAll(List *, List *); /* Node-specific functions */ /* Replace the value of the node. */ void LstNode_Set(ListNode *, void *); /* Set the value of the node to NULL. Having NULL in a list is unusual. */ void LstNode_SetNull(ListNode *); /* Using the list as a queue */ /* Add a datum at the tail of the queue. */ MAKE_INLINE void Lst_Enqueue(List *list, void *datum) { Lst_Append(list, datum); } /* Remove the head node of the queue and return its datum. */ void *Lst_Dequeue(List *); /* * A vector is an ordered collection of items, allowing for fast indexed * access. */ typedef struct Vector { void *items; /* memory holding the items */ size_t itemSize; /* size of a single item */ size_t len; /* number of actually usable elements */ size_t cap; /* capacity */ } Vector; void Vector_Init(Vector *, size_t); /* * Return the pointer to the given item in the vector. * The returned data is valid until the next modifying operation. */ MAKE_INLINE void * Vector_Get(Vector *v, size_t i) { unsigned char *items = v->items; return items + i * v->itemSize; } void *Vector_Push(Vector *); void *Vector_Pop(Vector *); MAKE_INLINE void Vector_Done(Vector *v) { free(v->items); } #endif /* MAKE_LST_H */ diff --git a/contrib/bmake/main.c b/contrib/bmake/main.c index 85a8a1cce7a1..60be60c7ca90 100644 --- a/contrib/bmake/main.c +++ b/contrib/bmake/main.c @@ -1,2289 +1,2289 @@ -/* $NetBSD: main.c,v 1.540 2021/06/18 12:54:17 rillig Exp $ */ +/* $NetBSD: main.c,v 1.541 2021/08/14 13:32:12 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * The main file for this entire program. Exit routines etc. reside here. * * Utility functions defined in this file: * * Main_ParseArgLine * Parse and process command line arguments from a * single string. Used to implement the special targets * .MFLAGS and .MAKEFLAGS. * * Error Print a tagged error message. * * Fatal Print an error message and exit. * * Punt Abort all jobs and exit with a message. * * Finish Finish things up by printing the number of errors * that occurred, and exit. */ #include #include #include #include #include #if defined(MAKE_NATIVE) && defined(HAVE_SYSCTL) #include #endif #include #include "wait.h" #include #include #include #include #include "make.h" #include "dir.h" #include "job.h" #include "pathnames.h" #include "trace.h" /* "@(#)main.c 8.3 (Berkeley) 3/19/94" */ -MAKE_RCSID("$NetBSD: main.c,v 1.540 2021/06/18 12:54:17 rillig Exp $"); +MAKE_RCSID("$NetBSD: main.c,v 1.541 2021/08/14 13:32:12 rillig Exp $"); #if defined(MAKE_NATIVE) && !defined(lint) __COPYRIGHT("@(#) Copyright (c) 1988, 1989, 1990, 1993 " "The Regents of the University of California. " "All rights reserved."); #endif #ifndef __arraycount # define __arraycount(__x) (sizeof(__x) / sizeof(__x[0])) #endif CmdOpts opts; time_t now; /* Time at start of make */ GNode *defaultNode; /* .DEFAULT node */ bool allPrecious; /* .PRECIOUS given on line by itself */ bool deleteOnError; /* .DELETE_ON_ERROR: set */ static int maxJobTokens; /* -j argument */ bool enterFlagObj; /* -w and objdir != srcdir */ static int jp_0 = -1, jp_1 = -1; /* ends of parent job pipe */ bool doing_depend; /* Set while reading .depend */ static bool jobsRunning; /* true if the jobs might be running */ static const char *tracefile; static int ReadMakefile(const char *); static void purge_relative_cached_realpaths(void); static bool ignorePWD; /* if we use -C, PWD is meaningless */ static char objdir[MAXPATHLEN + 1]; /* where we chdir'ed to */ char curdir[MAXPATHLEN + 1]; /* Startup directory */ const char *progname; char *makeDependfile; pid_t myPid; int makelevel; bool forceJobs = false; static int main_errors = 0; static HashTable cached_realpaths; /* * For compatibility with the POSIX version of MAKEFLAGS that includes * all the options without '-', convert 'flags' to '-f -l -a -g -s'. */ static char * explode(const char *flags) { size_t len; char *nf, *st; const char *f; if (flags == NULL) return NULL; for (f = flags; *f != '\0'; f++) if (!ch_isalpha(*f)) break; if (*f != '\0') return bmake_strdup(flags); len = strlen(flags); st = nf = bmake_malloc(len * 3 + 1); while (*flags != '\0') { *nf++ = '-'; *nf++ = *flags++; *nf++ = ' '; } *nf = '\0'; return st; } /* * usage -- * exit with usage message */ MAKE_ATTR_DEAD static void usage(void) { size_t prognameLen = strcspn(progname, "["); (void)fprintf(stderr, "usage: %.*s [-BeikNnqrSstWwX]\n" " [-C directory] [-D variable] [-d flags] [-f makefile]\n" " [-I directory] [-J private] [-j max_jobs] [-m directory] [-T file]\n" " [-V variable] [-v variable] [variable=value] [target ...]\n", (int)prognameLen, progname); exit(2); } static void MainParseArgDebugFile(const char *arg) { const char *mode; size_t len; char *fname; if (opts.debug_file != stdout && opts.debug_file != stderr) fclose(opts.debug_file); if (*arg == '+') { arg++; mode = "a"; } else mode = "w"; if (strcmp(arg, "stdout") == 0) { opts.debug_file = stdout; return; } if (strcmp(arg, "stderr") == 0) { opts.debug_file = stderr; return; } len = strlen(arg); fname = bmake_malloc(len + 20); memcpy(fname, arg, len + 1); /* Let the filename be modified by the pid */ if (strcmp(fname + len - 3, ".%d") == 0) snprintf(fname + len - 2, 20, "%d", getpid()); opts.debug_file = fopen(fname, mode); if (opts.debug_file == NULL) { fprintf(stderr, "Cannot open debug file %s\n", fname); usage(); } free(fname); } static void MainParseArgDebug(const char *argvalue) { const char *modules; DebugFlags debug = opts.debug; for (modules = argvalue; *modules != '\0'; modules++) { switch (*modules) { case '0': /* undocumented, only intended for tests */ debug = DEBUG_NONE; break; case 'A': debug = DEBUG_ALL; break; case 'a': debug |= DEBUG_ARCH; break; case 'C': debug |= DEBUG_CWD; break; case 'c': debug |= DEBUG_COND; break; case 'd': debug |= DEBUG_DIR; break; case 'e': debug |= DEBUG_ERROR; break; case 'f': debug |= DEBUG_FOR; break; case 'g': if (modules[1] == '1') { debug |= DEBUG_GRAPH1; modules++; } else if (modules[1] == '2') { debug |= DEBUG_GRAPH2; modules++; } else if (modules[1] == '3') { debug |= DEBUG_GRAPH3; modules++; } break; case 'h': debug |= DEBUG_HASH; break; case 'j': debug |= DEBUG_JOB; break; case 'L': opts.strict = true; break; case 'l': debug |= DEBUG_LOUD; break; case 'M': debug |= DEBUG_META; break; case 'm': debug |= DEBUG_MAKE; break; case 'n': debug |= DEBUG_SCRIPT; break; case 'p': debug |= DEBUG_PARSE; break; case 's': debug |= DEBUG_SUFF; break; case 't': debug |= DEBUG_TARG; break; case 'V': opts.debugVflag = true; break; case 'v': debug |= DEBUG_VAR; break; case 'x': debug |= DEBUG_SHELL; break; case 'F': MainParseArgDebugFile(modules + 1); goto debug_setbuf; default: (void)fprintf(stderr, "%s: illegal argument to d option -- %c\n", progname, *modules); usage(); } } debug_setbuf: opts.debug = debug; /* * Make the debug_file unbuffered, and make * stdout line buffered (unless debugfile == stdout). */ setvbuf(opts.debug_file, NULL, _IONBF, 0); if (opts.debug_file != stdout) { setvbuf(stdout, NULL, _IOLBF, 0); } } /* Is path relative, or does it contain any relative component "." or ".."? */ static bool IsRelativePath(const char *path) { const char *p; if (path[0] != '/') return true; p = path; while ((p = strstr(p, "/.")) != NULL) { p += 2; if (*p == '.') p++; if (*p == '/' || *p == '\0') return true; } return false; } static void MainParseArgChdir(const char *argvalue) { struct stat sa, sb; if (chdir(argvalue) == -1) { (void)fprintf(stderr, "%s: chdir %s: %s\n", progname, argvalue, strerror(errno)); exit(2); /* Not 1 so -q can distinguish error */ } if (getcwd(curdir, MAXPATHLEN) == NULL) { (void)fprintf(stderr, "%s: %s.\n", progname, strerror(errno)); exit(2); } if (!IsRelativePath(argvalue) && stat(argvalue, &sa) != -1 && stat(curdir, &sb) != -1 && sa.st_ino == sb.st_ino && sa.st_dev == sb.st_dev) strncpy(curdir, argvalue, MAXPATHLEN); ignorePWD = true; } static void MainParseArgJobsInternal(const char *argvalue) { char end; if (sscanf(argvalue, "%d,%d%c", &jp_0, &jp_1, &end) != 2) { (void)fprintf(stderr, "%s: internal error -- J option malformed (%s)\n", progname, argvalue); usage(); } if ((fcntl(jp_0, F_GETFD, 0) < 0) || (fcntl(jp_1, F_GETFD, 0) < 0)) { #if 0 (void)fprintf(stderr, "%s: ###### warning -- J descriptors were closed!\n", progname); exit(2); #endif jp_0 = -1; jp_1 = -1; opts.compatMake = true; } else { Global_Append(MAKEFLAGS, "-J"); Global_Append(MAKEFLAGS, argvalue); } } static void MainParseArgJobs(const char *argvalue) { char *p; forceJobs = true; opts.maxJobs = (int)strtol(argvalue, &p, 0); if (*p != '\0' || opts.maxJobs < 1) { (void)fprintf(stderr, "%s: illegal argument to -j -- must be positive integer!\n", progname); exit(2); /* Not 1 so -q can distinguish error */ } Global_Append(MAKEFLAGS, "-j"); Global_Append(MAKEFLAGS, argvalue); Global_Set(".MAKE.JOBS", argvalue); maxJobTokens = opts.maxJobs; } static void MainParseArgSysInc(const char *argvalue) { /* look for magic parent directory search string */ if (strncmp(".../", argvalue, 4) == 0) { char *found_path = Dir_FindHereOrAbove(curdir, argvalue + 4); if (found_path == NULL) return; (void)SearchPath_Add(sysIncPath, found_path); free(found_path); } else { (void)SearchPath_Add(sysIncPath, argvalue); } Global_Append(MAKEFLAGS, "-m"); Global_Append(MAKEFLAGS, argvalue); } static bool MainParseArg(char c, const char *argvalue) { switch (c) { case '\0': break; case 'B': opts.compatMake = true; Global_Append(MAKEFLAGS, "-B"); Global_Set(MAKE_MODE, "compat"); break; case 'C': MainParseArgChdir(argvalue); break; case 'D': if (argvalue[0] == '\0') return false; Global_SetExpand(argvalue, "1"); Global_Append(MAKEFLAGS, "-D"); Global_Append(MAKEFLAGS, argvalue); break; case 'I': Parse_AddIncludeDir(argvalue); Global_Append(MAKEFLAGS, "-I"); Global_Append(MAKEFLAGS, argvalue); break; case 'J': MainParseArgJobsInternal(argvalue); break; case 'N': opts.noExecute = true; opts.noRecursiveExecute = true; Global_Append(MAKEFLAGS, "-N"); break; case 'S': opts.keepgoing = false; Global_Append(MAKEFLAGS, "-S"); break; case 'T': tracefile = bmake_strdup(argvalue); Global_Append(MAKEFLAGS, "-T"); Global_Append(MAKEFLAGS, argvalue); break; case 'V': case 'v': opts.printVars = c == 'v' ? PVM_EXPANDED : PVM_UNEXPANDED; Lst_Append(&opts.variables, bmake_strdup(argvalue)); /* XXX: Why always -V? */ Global_Append(MAKEFLAGS, "-V"); Global_Append(MAKEFLAGS, argvalue); break; case 'W': opts.parseWarnFatal = true; /* XXX: why no Var_Append? */ break; case 'X': opts.varNoExportEnv = true; Global_Append(MAKEFLAGS, "-X"); break; case 'd': /* If '-d-opts' don't pass to children */ if (argvalue[0] == '-') argvalue++; else { Global_Append(MAKEFLAGS, "-d"); Global_Append(MAKEFLAGS, argvalue); } MainParseArgDebug(argvalue); break; case 'e': opts.checkEnvFirst = true; Global_Append(MAKEFLAGS, "-e"); break; case 'f': Lst_Append(&opts.makefiles, bmake_strdup(argvalue)); break; case 'i': opts.ignoreErrors = true; Global_Append(MAKEFLAGS, "-i"); break; case 'j': MainParseArgJobs(argvalue); break; case 'k': opts.keepgoing = true; Global_Append(MAKEFLAGS, "-k"); break; case 'm': MainParseArgSysInc(argvalue); /* XXX: why no Var_Append? */ break; case 'n': opts.noExecute = true; Global_Append(MAKEFLAGS, "-n"); break; case 'q': opts.queryFlag = true; /* Kind of nonsensical, wot? */ Global_Append(MAKEFLAGS, "-q"); break; case 'r': opts.noBuiltins = true; Global_Append(MAKEFLAGS, "-r"); break; case 's': opts.beSilent = true; Global_Append(MAKEFLAGS, "-s"); break; case 't': opts.touchFlag = true; Global_Append(MAKEFLAGS, "-t"); break; case 'w': opts.enterFlag = true; Global_Append(MAKEFLAGS, "-w"); break; default: case '?': usage(); } return true; } /* * Parse the given arguments. Called from main() and from * Main_ParseArgLine() when the .MAKEFLAGS target is used. * * The arguments must be treated as read-only and will be freed after the * call. * * XXX: Deal with command line overriding .MAKEFLAGS in makefile */ static void MainParseArgs(int argc, char **argv) { char c; int arginc; char *argvalue; char *optscan; bool inOption, dashDash = false; const char *optspecs = "BC:D:I:J:NST:V:WXd:ef:ij:km:nqrstv:w"; /* Can't actually use getopt(3) because rescanning is not portable */ rearg: inOption = false; optscan = NULL; while (argc > 1) { const char *optspec; if (!inOption) optscan = argv[1]; c = *optscan++; arginc = 0; if (inOption) { if (c == '\0') { argv++; argc--; inOption = false; continue; } } else { if (c != '-' || dashDash) break; inOption = true; c = *optscan++; } /* '-' found at some earlier point */ optspec = strchr(optspecs, c); if (c != '\0' && optspec != NULL && optspec[1] == ':') { /* - found, and should have an arg */ inOption = false; arginc = 1; argvalue = optscan; if (*argvalue == '\0') { if (argc < 3) goto noarg; argvalue = argv[2]; arginc = 2; } } else { argvalue = NULL; } switch (c) { case '\0': arginc = 1; inOption = false; break; case '-': dashDash = true; break; default: if (!MainParseArg(c, argvalue)) goto noarg; } argv += arginc; argc -= arginc; } /* * See if the rest of the arguments are variable assignments and * perform them if so. Else take them to be targets and stuff them * on the end of the "create" list. */ for (; argc > 1; argv++, argc--) { VarAssign var; if (Parse_IsVar(argv[1], &var)) { Parse_Var(&var, SCOPE_CMDLINE); } else { if (argv[1][0] == '\0') Punt("illegal (null) argument."); if (argv[1][0] == '-' && !dashDash) goto rearg; Lst_Append(&opts.create, bmake_strdup(argv[1])); } } return; noarg: (void)fprintf(stderr, "%s: option requires an argument -- %c\n", progname, c); usage(); } /* * Break a line of arguments into words and parse them. * * Used when a .MFLAGS or .MAKEFLAGS target is encountered during parsing and * by main() when reading the MAKEFLAGS environment variable. */ void Main_ParseArgLine(const char *line) { Words words; char *buf; if (line == NULL) return; /* XXX: don't use line as an iterator variable */ for (; *line == ' '; line++) continue; if (line[0] == '\0') return; #ifndef POSIX { /* * $MAKE may simply be naming the make(1) binary */ char *cp; if (!(cp = strrchr(line, '/'))) cp = line; if ((cp = strstr(cp, "make")) && strcmp(cp, "make") == 0) return; } #endif { FStr argv0 = Var_Value(SCOPE_GLOBAL, ".MAKE"); buf = str_concat3(argv0.str, " ", line); FStr_Done(&argv0); } words = Str_Words(buf, true); if (words.words == NULL) { Error("Unterminated quoted string [%s]", buf); free(buf); return; } free(buf); MainParseArgs((int)words.len, words.words); Words_Free(words); } bool Main_SetObjdir(bool writable, const char *fmt, ...) { struct stat sb; char *path; char buf[MAXPATHLEN + 1]; char buf2[MAXPATHLEN + 1]; bool rc = false; va_list ap; va_start(ap, fmt); vsnprintf(path = buf, MAXPATHLEN, fmt, ap); va_end(ap); if (path[0] != '/') { snprintf(buf2, MAXPATHLEN, "%s/%s", curdir, path); path = buf2; } /* look for the directory and try to chdir there */ if (stat(path, &sb) == 0 && S_ISDIR(sb.st_mode)) { if ((writable && access(path, W_OK) != 0) || (chdir(path) != 0)) { (void)fprintf(stderr, "%s warning: %s: %s.\n", progname, path, strerror(errno)); } else { snprintf(objdir, sizeof objdir, "%s", path); Global_Set(".OBJDIR", objdir); setenv("PWD", objdir, 1); Dir_InitDot(); purge_relative_cached_realpaths(); rc = true; if (opts.enterFlag && strcmp(objdir, curdir) != 0) enterFlagObj = true; } } return rc; } static bool SetVarObjdir(bool writable, const char *var, const char *suffix) { FStr path = Var_Value(SCOPE_CMDLINE, var); FStr xpath; if (path.str == NULL || path.str[0] == '\0') { FStr_Done(&path); return false; } /* expand variable substitutions */ xpath = FStr_InitRefer(path.str); if (strchr(path.str, '$') != 0) { char *expanded; (void)Var_Subst(path.str, SCOPE_GLOBAL, VARE_WANTRES, &expanded); /* TODO: handle errors */ xpath = FStr_InitOwn(expanded); } (void)Main_SetObjdir(writable, "%s%s", xpath.str, suffix); FStr_Done(&xpath); FStr_Done(&path); return true; } /* * Splits str into words, adding them to the list. * The string must be kept alive as long as the list. */ int str2Lst_Append(StringList *lp, char *str) { char *cp; int n; const char *sep = " \t"; for (n = 0, cp = strtok(str, sep); cp != NULL; cp = strtok(NULL, sep)) { Lst_Append(lp, cp); n++; } return n; } #ifdef SIGINFO /*ARGSUSED*/ static void siginfo(int signo MAKE_ATTR_UNUSED) { char dir[MAXPATHLEN]; char str[2 * MAXPATHLEN]; int len; if (getcwd(dir, sizeof dir) == NULL) return; len = snprintf(str, sizeof str, "%s: Working in: %s\n", progname, dir); if (len > 0) (void)write(STDERR_FILENO, str, (size_t)len); } #endif /* Allow makefiles some control over the mode we run in. */ static void MakeMode(void) { char *mode; (void)Var_Subst("${" MAKE_MODE ":tl}", SCOPE_GLOBAL, VARE_WANTRES, &mode); /* TODO: handle errors */ if (mode[0] != '\0') { if (strstr(mode, "compat") != NULL) { opts.compatMake = true; forceJobs = false; } #if USE_META if (strstr(mode, "meta") != NULL) meta_mode_init(mode); #endif } free(mode); } static void PrintVar(const char *varname, bool expandVars) { if (strchr(varname, '$') != NULL) { char *evalue; (void)Var_Subst(varname, SCOPE_GLOBAL, VARE_WANTRES, &evalue); /* TODO: handle errors */ printf("%s\n", evalue); bmake_free(evalue); } else if (expandVars) { char *expr = str_concat3("${", varname, "}"); char *evalue; (void)Var_Subst(expr, SCOPE_GLOBAL, VARE_WANTRES, &evalue); /* TODO: handle errors */ free(expr); printf("%s\n", evalue); bmake_free(evalue); } else { FStr value = Var_Value(SCOPE_GLOBAL, varname); printf("%s\n", value.str != NULL ? value.str : ""); FStr_Done(&value); } } /* * Return a bool based on a variable. * * If the knob is not set, return the fallback. * If set, anything that looks or smells like "No", "False", "Off", "0", etc. * is false, otherwise true. */ bool GetBooleanExpr(const char *expr, bool fallback) { char *value; bool res; (void)Var_Subst(expr, SCOPE_GLOBAL, VARE_WANTRES, &value); /* TODO: handle errors */ res = ParseBoolean(value, fallback); free(value); return res; } static void doPrintVars(void) { StringListNode *ln; bool expandVars; if (opts.printVars == PVM_EXPANDED) expandVars = true; else if (opts.debugVflag) expandVars = false; else expandVars = GetBooleanExpr("${.MAKE.EXPAND_VARIABLES}", false); for (ln = opts.variables.first; ln != NULL; ln = ln->next) { const char *varname = ln->datum; PrintVar(varname, expandVars); } } static bool runTargets(void) { GNodeList targs = LST_INIT; /* target nodes to create */ bool outOfDate; /* false if all targets up to date */ /* * Have now read the entire graph and need to make a list of * targets to create. If none was given on the command line, * we consult the parsing module to find the main target(s) * to create. */ if (Lst_IsEmpty(&opts.create)) Parse_MainName(&targs); else Targ_FindList(&targs, &opts.create); if (!opts.compatMake) { /* * Initialize job module before traversing the graph * now that any .BEGIN and .END targets have been read. * This is done only if the -q flag wasn't given * (to prevent the .BEGIN from being executed should * it exist). */ if (!opts.queryFlag) { Job_Init(); jobsRunning = true; } /* Traverse the graph, checking on all the targets */ outOfDate = Make_Run(&targs); } else { /* * Compat_Init will take care of creating all the * targets as well as initializing the module. */ Compat_Run(&targs); outOfDate = false; } Lst_Done(&targs); /* Don't free the targets themselves. */ return outOfDate; } /* * Set up the .TARGETS variable to contain the list of targets to be * created. If none specified, make the variable empty -- the parser * will fill the thing in with the default or .MAIN target. */ static void InitVarTargets(void) { StringListNode *ln; if (Lst_IsEmpty(&opts.create)) { Global_Set(".TARGETS", ""); return; } for (ln = opts.create.first; ln != NULL; ln = ln->next) { const char *name = ln->datum; Global_Append(".TARGETS", name); } } static void InitRandom(void) { struct timeval tv; gettimeofday(&tv, NULL); srandom((unsigned int)(tv.tv_sec + tv.tv_usec)); } static const char * InitVarMachine(const struct utsname *utsname MAKE_ATTR_UNUSED) { #ifdef FORCE_MACHINE return FORCE_MACHINE; #else const char *machine = getenv("MACHINE"); if (machine != NULL) return machine; #if defined(MAKE_NATIVE) return utsname->machine; #elif defined(MAKE_MACHINE) return MAKE_MACHINE; #else return "unknown"; #endif #endif } static const char * InitVarMachineArch(void) { #ifdef FORCE_MACHINE_ARCH return FORCE_MACHINE_ARCH; #else const char *env = getenv("MACHINE_ARCH"); if (env != NULL) return env; #if defined(MAKE_NATIVE) && defined(CTL_HW) { struct utsname utsname; static char machine_arch_buf[sizeof utsname.machine]; const int mib[2] = { CTL_HW, HW_MACHINE_ARCH }; size_t len = sizeof machine_arch_buf; if (sysctl(mib, (unsigned int)__arraycount(mib), machine_arch_buf, &len, NULL, 0) < 0) { (void)fprintf(stderr, "%s: sysctl failed (%s).\n", progname, strerror(errno)); exit(2); } return machine_arch_buf; } #elif defined(MACHINE_ARCH) return MACHINE_ARCH; #elif defined(MAKE_MACHINE_ARCH) return MAKE_MACHINE_ARCH; #else return "unknown"; #endif #endif } #ifndef NO_PWD_OVERRIDE /* * All this code is so that we know where we are when we start up * on a different machine with pmake. * * XXX: Make no longer has "local" and "remote" mode. Is this code still * necessary? * * Overriding getcwd() with $PWD totally breaks MAKEOBJDIRPREFIX * since the value of curdir can vary depending on how we got * here. Ie sitting at a shell prompt (shell that provides $PWD) * or via subdir.mk in which case its likely a shell which does * not provide it. * * So, to stop it breaking this case only, we ignore PWD if * MAKEOBJDIRPREFIX is set or MAKEOBJDIR contains a variable expression. */ static void HandlePWD(const struct stat *curdir_st) { char *pwd; FStr prefix, makeobjdir; struct stat pwd_st; if (ignorePWD || (pwd = getenv("PWD")) == NULL) return; prefix = Var_Value(SCOPE_CMDLINE, "MAKEOBJDIRPREFIX"); if (prefix.str != NULL) { FStr_Done(&prefix); return; } makeobjdir = Var_Value(SCOPE_CMDLINE, "MAKEOBJDIR"); if (makeobjdir.str != NULL && strchr(makeobjdir.str, '$') != NULL) goto ignore_pwd; if (stat(pwd, &pwd_st) == 0 && curdir_st->st_ino == pwd_st.st_ino && curdir_st->st_dev == pwd_st.st_dev) (void)strncpy(curdir, pwd, MAXPATHLEN); ignore_pwd: FStr_Done(&makeobjdir); } #endif /* * Find the .OBJDIR. If MAKEOBJDIRPREFIX, or failing that, * MAKEOBJDIR is set in the environment, try only that value * and fall back to .CURDIR if it does not exist. * * Otherwise, try _PATH_OBJDIR.MACHINE-MACHINE_ARCH, _PATH_OBJDIR.MACHINE, * and * finally _PATH_OBJDIRPREFIX`pwd`, in that order. If none * of these paths exist, just use .CURDIR. */ static void InitObjdir(const char *machine, const char *machine_arch) { bool writable; Dir_InitCur(curdir); writable = GetBooleanExpr("${MAKE_OBJDIR_CHECK_WRITABLE}", true); (void)Main_SetObjdir(false, "%s", curdir); if (!SetVarObjdir(writable, "MAKEOBJDIRPREFIX", curdir) && !SetVarObjdir(writable, "MAKEOBJDIR", "") && !Main_SetObjdir(writable, "%s.%s-%s", _PATH_OBJDIR, machine, machine_arch) && !Main_SetObjdir(writable, "%s.%s", _PATH_OBJDIR, machine) && !Main_SetObjdir(writable, "%s", _PATH_OBJDIR)) (void)Main_SetObjdir(writable, "%s%s", _PATH_OBJDIRPREFIX, curdir); } /* get rid of resource limit on file descriptors */ static void UnlimitFiles(void) { -#if defined(MAKE_NATIVE) || (defined(HAVE_SETRLIMIT) && defined(RLIMIT_NOFILE)) +#if defined(HAVE_SETRLIMIT) && defined(RLIMIT_NOFILE) struct rlimit rl; if (getrlimit(RLIMIT_NOFILE, &rl) != -1 && rl.rlim_cur != rl.rlim_max) { rl.rlim_cur = rl.rlim_max; (void)setrlimit(RLIMIT_NOFILE, &rl); } #endif } static void CmdOpts_Init(void) { opts.compatMake = false; opts.debug = DEBUG_NONE; /* opts.debug_file has already been initialized earlier */ opts.strict = false; opts.debugVflag = false; opts.checkEnvFirst = false; Lst_Init(&opts.makefiles); opts.ignoreErrors = false; /* Pay attention to non-zero returns */ opts.maxJobs = 1; opts.keepgoing = false; /* Stop on error */ opts.noRecursiveExecute = false; /* Execute all .MAKE targets */ opts.noExecute = false; /* Execute all commands */ opts.queryFlag = false; opts.noBuiltins = false; /* Read the built-in rules */ opts.beSilent = false; /* Print commands as executed */ opts.touchFlag = false; opts.printVars = PVM_NONE; Lst_Init(&opts.variables); opts.parseWarnFatal = false; opts.enterFlag = false; opts.varNoExportEnv = false; Lst_Init(&opts.create); } /* * Initialize MAKE and .MAKE to the path of the executable, so that it can be * found by execvp(3) and the shells, even after a chdir. * * If it's a relative path and contains a '/', resolve it to an absolute path. * Otherwise keep it as is, assuming it will be found in the PATH. */ static void InitVarMake(const char *argv0) { const char *make = argv0; if (argv0[0] != '/' && strchr(argv0, '/') != NULL) { char pathbuf[MAXPATHLEN]; const char *abspath = cached_realpath(argv0, pathbuf); struct stat st; if (abspath != NULL && abspath[0] == '/' && stat(make, &st) == 0) make = abspath; } Global_Set("MAKE", make); Global_Set(".MAKE", make); } /* * Add the directories from the colon-separated syspath to defSysIncPath. * After returning, the contents of syspath is unspecified. */ static void InitDefSysIncPath(char *syspath) { static char defsyspath[] = _PATH_DEFSYSPATH; char *start, *cp; /* * If no user-supplied system path was given (through the -m option) * add the directories from the DEFSYSPATH (more than one may be given * as dir1:...:dirn) to the system include path. */ if (syspath == NULL || syspath[0] == '\0') syspath = defsyspath; else syspath = bmake_strdup(syspath); for (start = syspath; *start != '\0'; start = cp) { for (cp = start; *cp != '\0' && *cp != ':'; cp++) continue; if (*cp == ':') *cp++ = '\0'; /* look for magic parent directory search string */ if (strncmp(start, ".../", 4) == 0) { char *dir = Dir_FindHereOrAbove(curdir, start + 4); if (dir != NULL) { (void)SearchPath_Add(defSysIncPath, dir); free(dir); } } else { (void)SearchPath_Add(defSysIncPath, start); } } if (syspath != defsyspath) free(syspath); } static void ReadBuiltinRules(void) { StringListNode *ln; StringList sysMkFiles = LST_INIT; SearchPath_Expand( Lst_IsEmpty(&sysIncPath->dirs) ? defSysIncPath : sysIncPath, _PATH_DEFSYSMK, &sysMkFiles); if (Lst_IsEmpty(&sysMkFiles)) Fatal("%s: no system rules (%s).", progname, _PATH_DEFSYSMK); for (ln = sysMkFiles.first; ln != NULL; ln = ln->next) if (ReadMakefile(ln->datum) == 0) break; if (ln == NULL) Fatal("%s: cannot open %s.", progname, (const char *)sysMkFiles.first->datum); /* Free the list nodes but not the actual filenames since these may * still be used in GNodes. */ Lst_Done(&sysMkFiles); } static void InitMaxJobs(void) { char *value; int n; if (forceJobs || opts.compatMake || !Var_Exists(SCOPE_GLOBAL, ".MAKE.JOBS")) return; (void)Var_Subst("${.MAKE.JOBS}", SCOPE_GLOBAL, VARE_WANTRES, &value); /* TODO: handle errors */ n = (int)strtol(value, NULL, 0); if (n < 1) { (void)fprintf(stderr, "%s: illegal value for .MAKE.JOBS " "-- must be positive integer!\n", progname); exit(2); /* Not 1 so -q can distinguish error */ } if (n != opts.maxJobs) { Global_Append(MAKEFLAGS, "-j"); Global_Append(MAKEFLAGS, value); } opts.maxJobs = n; maxJobTokens = opts.maxJobs; forceJobs = true; free(value); } /* * For compatibility, look at the directories in the VPATH variable * and add them to the search path, if the variable is defined. The * variable's value is in the same format as the PATH environment * variable, i.e. ::... */ static void InitVpath(void) { char *vpath, savec, *path; if (!Var_Exists(SCOPE_CMDLINE, "VPATH")) return; (void)Var_Subst("${VPATH}", SCOPE_CMDLINE, VARE_WANTRES, &vpath); /* TODO: handle errors */ path = vpath; do { char *cp; /* skip to end of directory */ for (cp = path; *cp != ':' && *cp != '\0'; cp++) continue; /* Save terminator character so know when to stop */ savec = *cp; *cp = '\0'; /* Add directory to search path */ (void)SearchPath_Add(&dirSearchPath, path); *cp = savec; path = cp + 1; } while (savec == ':'); free(vpath); } static void ReadAllMakefiles(StringList *makefiles) { StringListNode *ln; for (ln = makefiles->first; ln != NULL; ln = ln->next) { const char *fname = ln->datum; if (ReadMakefile(fname) != 0) Fatal("%s: cannot open %s.", progname, fname); } } static void ReadFirstDefaultMakefile(void) { StringListNode *ln; char *prefs; (void)Var_Subst("${" MAKE_MAKEFILE_PREFERENCE "}", SCOPE_CMDLINE, VARE_WANTRES, &prefs); /* TODO: handle errors */ /* XXX: This should use a local list instead of opts.makefiles * since these makefiles do not come from the command line. They * also have different semantics in that only the first file that * is found is processed. See ReadAllMakefiles. */ (void)str2Lst_Append(&opts.makefiles, prefs); for (ln = opts.makefiles.first; ln != NULL; ln = ln->next) if (ReadMakefile(ln->datum) == 0) break; free(prefs); } /* * Initialize variables such as MAKE, MACHINE, .MAKEFLAGS. * Initialize a few modules. * Parse the arguments from MAKEFLAGS and the command line. */ static void main_Init(int argc, char **argv) { struct stat sa; const char *machine; const char *machine_arch; char *syspath = getenv("MAKESYSPATH"); struct utsname utsname; /* default to writing debug to stderr */ opts.debug_file = stderr; HashTable_Init(&cached_realpaths); #ifdef SIGINFO (void)bmake_signal(SIGINFO, siginfo); #endif InitRandom(); progname = str_basename(argv[0]); UnlimitFiles(); if (uname(&utsname) == -1) { (void)fprintf(stderr, "%s: uname failed (%s).\n", progname, strerror(errno)); exit(2); } /* * Get the name of this type of MACHINE from utsname * so we can share an executable for similar machines. * (i.e. m68k: amiga hp300, mac68k, sun3, ...) * * Note that both MACHINE and MACHINE_ARCH are decided at * run-time. */ machine = InitVarMachine(&utsname); machine_arch = InitVarMachineArch(); myPid = getpid(); /* remember this for vFork() */ /* * Just in case MAKEOBJDIR wants us to do something tricky. */ Targ_Init(); Var_Init(); Global_Set(".MAKE.OS", utsname.sysname); Global_Set("MACHINE", machine); Global_Set("MACHINE_ARCH", machine_arch); #ifdef MAKE_VERSION Global_Set("MAKE_VERSION", MAKE_VERSION); #endif Global_Set(".newline", "\n"); /* handy for :@ loops */ /* * This is the traditional preference for makefiles. */ #ifndef MAKEFILE_PREFERENCE_LIST # define MAKEFILE_PREFERENCE_LIST "makefile Makefile" #endif Global_Set(MAKE_MAKEFILE_PREFERENCE, MAKEFILE_PREFERENCE_LIST); Global_Set(MAKE_DEPENDFILE, ".depend"); CmdOpts_Init(); allPrecious = false; /* Remove targets when interrupted */ deleteOnError = false; /* Historical default behavior */ jobsRunning = false; maxJobTokens = opts.maxJobs; ignorePWD = false; /* * Initialize the parsing, directory and variable modules to prepare * for the reading of inclusion paths and variable settings on the * command line */ /* * Initialize various variables. * MAKE also gets this name, for compatibility * .MAKEFLAGS gets set to the empty string just in case. * MFLAGS also gets initialized empty, for compatibility. */ Parse_Init(); InitVarMake(argv[0]); Global_Set(MAKEFLAGS, ""); Global_Set(MAKEOVERRIDES, ""); Global_Set("MFLAGS", ""); Global_Set(".ALLTARGETS", ""); /* some makefiles need to know this */ Var_Set(SCOPE_CMDLINE, MAKE_LEVEL ".ENV", MAKE_LEVEL_ENV); /* Set some other useful variables. */ { char tmp[64], *ep = getenv(MAKE_LEVEL_ENV); makelevel = ep != NULL && ep[0] != '\0' ? atoi(ep) : 0; if (makelevel < 0) makelevel = 0; snprintf(tmp, sizeof tmp, "%d", makelevel); Global_Set(MAKE_LEVEL, tmp); snprintf(tmp, sizeof tmp, "%u", myPid); Global_Set(".MAKE.PID", tmp); snprintf(tmp, sizeof tmp, "%u", getppid()); Global_Set(".MAKE.PPID", tmp); snprintf(tmp, sizeof tmp, "%u", getuid()); Global_Set(".MAKE.UID", tmp); snprintf(tmp, sizeof tmp, "%u", getgid()); Global_Set(".MAKE.GID", tmp); } if (makelevel > 0) { char pn[1024]; snprintf(pn, sizeof pn, "%s[%d]", progname, makelevel); progname = bmake_strdup(pn); } #ifdef USE_META meta_init(); #endif Dir_Init(); /* * First snag any flags out of the MAKE environment variable. * (Note this is *not* MAKEFLAGS since /bin/make uses that and it's * in a different format). */ #ifdef POSIX { char *p1 = explode(getenv("MAKEFLAGS")); Main_ParseArgLine(p1); free(p1); } #else Main_ParseArgLine(getenv("MAKE")); #endif /* * Find where we are (now). * We take care of PWD for the automounter below... */ if (getcwd(curdir, MAXPATHLEN) == NULL) { (void)fprintf(stderr, "%s: getcwd: %s.\n", progname, strerror(errno)); exit(2); } MainParseArgs(argc, argv); if (opts.enterFlag) printf("%s: Entering directory `%s'\n", progname, curdir); /* * Verify that cwd is sane. */ if (stat(curdir, &sa) == -1) { (void)fprintf(stderr, "%s: %s: %s.\n", progname, curdir, strerror(errno)); exit(2); } #ifndef NO_PWD_OVERRIDE HandlePWD(&sa); #endif Global_Set(".CURDIR", curdir); InitObjdir(machine, machine_arch); /* * Initialize archive, target and suffix modules in preparation for * parsing the makefile(s) */ Arch_Init(); Suff_Init(); Trace_Init(tracefile); defaultNode = NULL; (void)time(&now); Trace_Log(MAKESTART, NULL); InitVarTargets(); InitDefSysIncPath(syspath); } /* * Read the system makefile followed by either makefile, Makefile or the * files given by the -f option. Exit on parse errors. */ static void main_ReadFiles(void) { if (!opts.noBuiltins) ReadBuiltinRules(); if (!Lst_IsEmpty(&opts.makefiles)) ReadAllMakefiles(&opts.makefiles); else ReadFirstDefaultMakefile(); } /* Compute the dependency graph. */ static void main_PrepareMaking(void) { /* In particular suppress .depend for '-r -V .OBJDIR -f /dev/null' */ if (!opts.noBuiltins || opts.printVars == PVM_NONE) { (void)Var_Subst("${.MAKE.DEPENDFILE}", SCOPE_CMDLINE, VARE_WANTRES, &makeDependfile); if (makeDependfile[0] != '\0') { /* TODO: handle errors */ doing_depend = true; (void)ReadMakefile(makeDependfile); doing_depend = false; } } if (enterFlagObj) printf("%s: Entering directory `%s'\n", progname, objdir); MakeMode(); { FStr makeflags = Var_Value(SCOPE_GLOBAL, MAKEFLAGS); Global_Append("MFLAGS", makeflags.str); FStr_Done(&makeflags); } InitMaxJobs(); /* * Be compatible if the user did not specify -j and did not explicitly * turn compatibility on. */ if (!opts.compatMake && !forceJobs) opts.compatMake = true; if (!opts.compatMake) Job_ServerStart(maxJobTokens, jp_0, jp_1); DEBUG5(JOB, "job_pipe %d %d, maxjobs %d, tokens %d, compat %d\n", jp_0, jp_1, opts.maxJobs, maxJobTokens, opts.compatMake ? 1 : 0); if (opts.printVars == PVM_NONE) Main_ExportMAKEFLAGS(true); /* initial export */ InitVpath(); /* * Now that all search paths have been read for suffixes et al, it's * time to add the default search path to their lists... */ Suff_ExtendPaths(); /* * Propagate attributes through :: dependency lists. */ Targ_Propagate(); /* print the initial graph, if the user requested it */ if (DEBUG(GRAPH1)) Targ_PrintGraph(1); } /* * Make the targets. * If the -v or -V options are given, print variables instead. * Return whether any of the targets is out-of-date. */ static bool main_Run(void) { if (opts.printVars != PVM_NONE) { /* print the values of any variables requested by the user */ doPrintVars(); return false; } else { return runTargets(); } } /* Clean up after making the targets. */ static void main_CleanUp(void) { #ifdef CLEANUP Lst_DoneCall(&opts.variables, free); /* * Don't free the actual strings from opts.makefiles, they may be * used in GNodes. */ Lst_Done(&opts.makefiles); Lst_DoneCall(&opts.create, free); #endif /* print the graph now it's been processed if the user requested it */ if (DEBUG(GRAPH2)) Targ_PrintGraph(2); Trace_Log(MAKEEND, NULL); if (enterFlagObj) printf("%s: Leaving directory `%s'\n", progname, objdir); if (opts.enterFlag) printf("%s: Leaving directory `%s'\n", progname, curdir); #ifdef USE_META meta_finish(); #endif Suff_End(); Targ_End(); Arch_End(); Var_End(); Parse_End(); Dir_End(); Job_End(); Trace_End(); } /* Determine the exit code. */ static int main_Exit(bool outOfDate) { - if (opts.strict && (main_errors > 0 || Parse_GetFatals() > 0)) + if (opts.strict && (main_errors > 0 || Parse_NumErrors() > 0)) return 2; /* Not 1 so -q can distinguish error */ return outOfDate ? 1 : 0; } int main(int argc, char **argv) { bool outOfDate; main_Init(argc, argv); main_ReadFiles(); main_PrepareMaking(); outOfDate = main_Run(); main_CleanUp(); return main_Exit(outOfDate); } /* * Open and parse the given makefile, with all its side effects. * * Results: * 0 if ok. -1 if couldn't open file. */ static int ReadMakefile(const char *fname) { int fd; char *name, *path = NULL; if (strcmp(fname, "-") == 0) { Parse_File(NULL /*stdin*/, -1); Var_Set(SCOPE_INTERNAL, "MAKEFILE", ""); } else { /* if we've chdir'd, rebuild the path name */ if (strcmp(curdir, objdir) != 0 && *fname != '/') { path = str_concat3(curdir, "/", fname); fd = open(path, O_RDONLY); if (fd != -1) { fname = path; goto found; } free(path); /* If curdir failed, try objdir (ala .depend) */ path = str_concat3(objdir, "/", fname); fd = open(path, O_RDONLY); if (fd != -1) { fname = path; goto found; } } else { fd = open(fname, O_RDONLY); if (fd != -1) goto found; } /* look in -I and system include directories. */ name = Dir_FindFile(fname, parseIncPath); if (name == NULL) { SearchPath *sysInc = Lst_IsEmpty(&sysIncPath->dirs) ? defSysIncPath : sysIncPath; name = Dir_FindFile(fname, sysInc); } if (name == NULL || (fd = open(name, O_RDONLY)) == -1) { free(name); free(path); return -1; } fname = name; /* * set the MAKEFILE variable desired by System V fans -- the * placement of the setting here means it gets set to the last * makefile specified, as it is set by SysV make. */ found: if (!doing_depend) Var_Set(SCOPE_INTERNAL, "MAKEFILE", fname); Parse_File(fname, fd); } free(path); return 0; } /* * Cmd_Exec -- * Execute the command in cmd, and return the output of that command * in a string. In the output, newlines are replaced with spaces. * * Results: * A string containing the output of the command, or the empty string. * *errfmt returns a format string describing the command failure, * if any, using a single %s conversion specification. * * Side Effects: * The string must be freed by the caller. */ char * Cmd_Exec(const char *cmd, const char **errfmt) { const char *args[4]; /* Args for invoking the shell */ int pipefds[2]; int cpid; /* Child PID */ int pid; /* PID from wait() */ int status; /* command exit status */ Buffer buf; /* buffer to store the result */ ssize_t bytes_read; char *res; /* result */ size_t res_len; char *cp; int savederr; /* saved errno */ *errfmt = NULL; if (shellName == NULL) Shell_Init(); /* * Set up arguments for shell */ args[0] = shellName; args[1] = "-c"; args[2] = cmd; args[3] = NULL; /* * Open a pipe for fetching its output */ if (pipe(pipefds) == -1) { *errfmt = "Couldn't create pipe for \"%s\""; goto bad; } Var_ReexportVars(); /* * Fork */ switch (cpid = vfork()) { case 0: (void)close(pipefds[0]); /* Close input side of pipe */ /* * Duplicate the output stream to the shell's output, then * shut the extra thing down. Note we don't fetch the error * stream...why not? Why? */ (void)dup2(pipefds[1], 1); (void)close(pipefds[1]); (void)execv(shellPath, UNCONST(args)); _exit(1); /*NOTREACHED*/ case -1: *errfmt = "Couldn't exec \"%s\""; goto bad; default: (void)close(pipefds[1]); /* No need for the writing half */ savederr = 0; Buf_Init(&buf); do { char result[BUFSIZ]; bytes_read = read(pipefds[0], result, sizeof result); if (bytes_read > 0) Buf_AddBytes(&buf, result, (size_t)bytes_read); } while (bytes_read > 0 || (bytes_read == -1 && errno == EINTR)); if (bytes_read == -1) savederr = errno; (void)close(pipefds[0]); /* Close the input side of the pipe. */ /* Wait for the process to exit. */ while ((pid = waitpid(cpid, &status, 0)) != cpid && pid >= 0) JobReapChild(pid, status, false); res_len = buf.len; res = Buf_DoneData(&buf); if (savederr != 0) *errfmt = "Couldn't read shell's output for \"%s\""; if (WIFSIGNALED(status)) *errfmt = "\"%s\" exited on a signal"; else if (WEXITSTATUS(status) != 0) *errfmt = "\"%s\" returned non-zero status"; /* Convert newlines to spaces. A final newline is just stripped */ if (res_len > 0 && res[res_len - 1] == '\n') res[res_len - 1] = '\0'; for (cp = res; *cp != '\0'; cp++) if (*cp == '\n') *cp = ' '; break; } return res; bad: return bmake_strdup(""); } /* * Print a printf-style error message. * * In default mode, this error message has no consequences, in particular it * does not affect the exit status. Only in lint mode (-dL) it does. */ void Error(const char *fmt, ...) { va_list ap; FILE *err_file; err_file = opts.debug_file; if (err_file == stdout) err_file = stderr; (void)fflush(stdout); for (;;) { va_start(ap, fmt); fprintf(err_file, "%s: ", progname); (void)vfprintf(err_file, fmt, ap); va_end(ap); (void)fprintf(err_file, "\n"); (void)fflush(err_file); if (err_file == stderr) break; err_file = stderr; } main_errors++; } /* * Wait for any running jobs to finish, then produce an error message, * finally exit immediately. * * Exiting immediately differs from Parse_Error, which exits only after the * current top-level makefile has been parsed completely. */ void Fatal(const char *fmt, ...) { va_list ap; if (jobsRunning) Job_Wait(); (void)fflush(stdout); va_start(ap, fmt); (void)vfprintf(stderr, fmt, ap); va_end(ap); (void)fprintf(stderr, "\n"); (void)fflush(stderr); PrintOnError(NULL, NULL); if (DEBUG(GRAPH2) || DEBUG(GRAPH3)) Targ_PrintGraph(2); Trace_Log(MAKEERROR, NULL); exit(2); /* Not 1 so -q can distinguish error */ } /* * Major exception once jobs are being created. * Kills all jobs, prints a message and exits. */ void Punt(const char *fmt, ...) { va_list ap; va_start(ap, fmt); (void)fflush(stdout); (void)fprintf(stderr, "%s: ", progname); (void)vfprintf(stderr, fmt, ap); va_end(ap); (void)fprintf(stderr, "\n"); (void)fflush(stderr); PrintOnError(NULL, NULL); DieHorribly(); } /* Exit without giving a message. */ void DieHorribly(void) { if (jobsRunning) Job_AbortAll(); if (DEBUG(GRAPH2)) Targ_PrintGraph(2); Trace_Log(MAKEERROR, NULL); exit(2); /* Not 1 so -q can distinguish error */ } /* * Called when aborting due to errors in child shell to signal abnormal exit. * The program exits. * Errors is the number of errors encountered in Make_Make. */ void Finish(int errs) { if (shouldDieQuietly(NULL, -1)) exit(2); Fatal("%d error%s", errs, errs == 1 ? "" : "s"); } /* * eunlink -- * Remove a file carefully, avoiding directories. */ int eunlink(const char *file) { struct stat st; if (lstat(file, &st) == -1) return -1; if (S_ISDIR(st.st_mode)) { errno = EISDIR; return -1; } return unlink(file); } static void write_all(int fd, const void *data, size_t n) { const char *mem = data; while (n > 0) { ssize_t written = write(fd, mem, n); if (written == -1 && errno == EAGAIN) continue; if (written == -1) break; mem += written; n -= (size_t)written; } } /* * execDie -- * Print why exec failed, avoiding stdio. */ void MAKE_ATTR_DEAD execDie(const char *af, const char *av) { Buffer buf; Buf_Init(&buf); Buf_AddStr(&buf, progname); Buf_AddStr(&buf, ": "); Buf_AddStr(&buf, af); Buf_AddStr(&buf, "("); Buf_AddStr(&buf, av); Buf_AddStr(&buf, ") failed ("); Buf_AddStr(&buf, strerror(errno)); Buf_AddStr(&buf, ")\n"); write_all(STDERR_FILENO, buf.data, buf.len); Buf_Done(&buf); _exit(1); } /* purge any relative paths */ static void purge_relative_cached_realpaths(void) { HashEntry *he, *nhe; HashIter hi; HashIter_Init(&hi, &cached_realpaths); he = HashIter_Next(&hi); while (he != NULL) { nhe = HashIter_Next(&hi); if (he->key[0] != '/') { DEBUG1(DIR, "cached_realpath: purging %s\n", he->key); HashTable_DeleteEntry(&cached_realpaths, he); /* XXX: What about the allocated he->value? Either * free them or document why they cannot be freed. */ } he = nhe; } } char * cached_realpath(const char *pathname, char *resolved) { const char *rp; if (pathname == NULL || pathname[0] == '\0') return NULL; rp = HashTable_FindValue(&cached_realpaths, pathname); if (rp != NULL) { /* a hit */ strncpy(resolved, rp, MAXPATHLEN); resolved[MAXPATHLEN - 1] = '\0'; return resolved; } rp = realpath(pathname, resolved); if (rp != NULL) { HashTable_Set(&cached_realpaths, pathname, bmake_strdup(rp)); DEBUG2(DIR, "cached_realpath: %s -> %s\n", pathname, rp); return resolved; } /* should we negative-cache? */ return NULL; } /* * Return true if we should die without noise. * For example our failing child was a sub-make or failure happened elsewhere. */ bool shouldDieQuietly(GNode *gn, int bf) { static int quietly = -1; if (quietly < 0) { if (DEBUG(JOB) || !GetBooleanExpr("${.MAKE.DIE_QUIETLY}", true)) quietly = 0; else if (bf >= 0) quietly = bf; else quietly = (gn != NULL && (gn->type & OP_MAKE)) ? 1 : 0; } return quietly != 0; } static void SetErrorVars(GNode *gn) { StringListNode *ln; /* * We can print this even if there is no .ERROR target. */ Global_Set(".ERROR_TARGET", gn->name); Global_Delete(".ERROR_CMD"); for (ln = gn->commands.first; ln != NULL; ln = ln->next) { const char *cmd = ln->datum; if (cmd == NULL) break; Global_Append(".ERROR_CMD", cmd); } } /* * Print some helpful information in case of an error. * The caller should exit soon after calling this function. */ void PrintOnError(GNode *gn, const char *msg) { static GNode *errorNode = NULL; if (DEBUG(HASH)) { Targ_Stats(); Var_Stats(); } if (errorNode != NULL) return; /* we've been here! */ if (msg != NULL) printf("%s", msg); printf("\n%s: stopped in %s\n", progname, curdir); /* we generally want to keep quiet if a sub-make died */ if (shouldDieQuietly(gn, -1)) return; if (gn != NULL) SetErrorVars(gn); { char *errorVarsValues; (void)Var_Subst("${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'\n@}", SCOPE_GLOBAL, VARE_WANTRES, &errorVarsValues); /* TODO: handle errors */ printf("%s", errorVarsValues); free(errorVarsValues); } fflush(stdout); /* * Finally, see if there is a .ERROR target, and run it if so. */ errorNode = Targ_FindNode(".ERROR"); if (errorNode != NULL) { errorNode->type |= OP_SPECIAL; Compat_Make(errorNode, errorNode); } } void Main_ExportMAKEFLAGS(bool first) { static bool once = true; const char *expr; char *s; if (once != first) return; once = false; expr = "${.MAKEFLAGS} ${.MAKEOVERRIDES:O:u:@v@$v=${$v:Q}@}"; (void)Var_Subst(expr, SCOPE_CMDLINE, VARE_WANTRES, &s); /* TODO: handle errors */ if (s[0] != '\0') { #ifdef POSIX setenv("MAKEFLAGS", s, 1); #else setenv("MAKE", s, 1); #endif } } char * getTmpdir(void) { static char *tmpdir = NULL; struct stat st; if (tmpdir != NULL) return tmpdir; /* Honor $TMPDIR but only if it is valid. Ensure it ends with '/'. */ (void)Var_Subst("${TMPDIR:tA:U" _PATH_TMP ":S,/$,,W}/", SCOPE_GLOBAL, VARE_WANTRES, &tmpdir); /* TODO: handle errors */ if (stat(tmpdir, &st) < 0 || !S_ISDIR(st.st_mode)) { free(tmpdir); tmpdir = bmake_strdup(_PATH_TMP); } return tmpdir; } /* * Create and open a temp file using "pattern". * If out_fname is provided, set it to a copy of the filename created. * Otherwise unlink the file once open. */ int mkTempFile(const char *pattern, char *tfile, size_t tfile_sz) { static char *tmpdir = NULL; char tbuf[MAXPATHLEN]; int fd; if (pattern == NULL) pattern = TMPPAT; if (tmpdir == NULL) tmpdir = getTmpdir(); if (tfile == NULL) { tfile = tbuf; tfile_sz = sizeof tbuf; } if (pattern[0] == '/') { snprintf(tfile, tfile_sz, "%s", pattern); } else { snprintf(tfile, tfile_sz, "%s%s", tmpdir, pattern); } if ((fd = mkstemp(tfile)) < 0) Punt("Could not create temporary file %s: %s", tfile, strerror(errno)); if (tfile == tbuf) { unlink(tfile); /* we just want the descriptor */ } return fd; } /* * Convert a string representation of a boolean into a boolean value. * Anything that looks like "No", "False", "Off", "0" etc. is false, * the empty string is the fallback, everything else is true. */ bool ParseBoolean(const char *s, bool fallback) { char ch = ch_tolower(s[0]); if (ch == '\0') return fallback; if (ch == '0' || ch == 'f' || ch == 'n') return false; if (ch == 'o') return ch_tolower(s[1]) != 'f'; return true; } diff --git a/contrib/bmake/make-bootstrap.sh.in b/contrib/bmake/make-bootstrap.sh.in index 0ecce455da74..829ae7e280e2 100755 --- a/contrib/bmake/make-bootstrap.sh.in +++ b/contrib/bmake/make-bootstrap.sh.in @@ -1,95 +1,95 @@ #!/bin/sh set -e srcdir=@srcdir@ DEFAULT_SYS_PATH="@default_sys_path@" case "@use_meta@" in yes) XDEFS="-DUSE_META ${XDEFS}";; esac CC="@CC@" CFLAGS="@CFLAGS@ -I. -I${srcdir} @DEFS@ @CPPFLAGS@ -DMAKE_NATIVE ${XDEFS} -DBMAKE_PATH_MAX=@bmake_path_max@" MAKE_VERSION=@_MAKE_VERSION@ MDEFS="-DMAKE_VERSION=\"$MAKE_VERSION\" \ -D@force_machine@MACHINE=\"@machine@\" \ -D@force_machine_arch@MACHINE_ARCH=\"@machine_arch@\" \ -D_PATH_DEFSYSPATH=\"${DEFAULT_SYS_PATH}\"" LDFLAGS="@LDFLAGS@" LIBS="@LIBS@" toUpper() { ${TR:-tr} abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ } do_compile2() { obj="$1"; shift src="$1"; shift echo ${CC} -c ${CFLAGS} "$@" -o "$obj" "$src" ${CC} -c ${CFLAGS} "$@" -o "$obj" "$src" } do_compile() { obj="$1"; shift case "$1" in *.c) src=$1; shift;; *) src=`basename "$obj" .o`.c;; esac for d in "$srcdir" "$srcdir/lst.lib" do test -s "$d/$src" || continue do_compile2 "$obj" "$d/$src" "$@" || exit 1 return done echo "Unknown object file '$obj'" >&2 exit 1 } do_link() { output="$1"; shift echo ${CC} ${LDSTATIC} ${LDFLAGS} -o "$output" "$@" ${LIBS} ${CC} ${LDSTATIC} ${LDFLAGS} -o "$output" "$@" ${LIBS} } -BASE_OBJECTS="arch.o buf.o compat.o cond.o dir.o enum.o for.o getopt hash.o \ +BASE_OBJECTS="arch.o buf.o compat.o cond.o dir.o for.o hash.o \ lst.o make.o make_malloc.o metachar.o parse.o sigcompat.o str.o \ suff.o targ.o trace.o var.o util.o" LIB_OBJECTS="@LIBOBJS@" do_compile main.o ${MDEFS} for o in ${BASE_OBJECTS} ${LIB_OBJECTS} do do_compile "$o" done case "@use_meta@" in yes) case "@use_filemon@" in no) MDEFS=;; *) MDEFS="-DUSE_FILEMON -DUSE_FILEMON_`echo @use_filemon@ | toUpper`" case "@use_filemon@,@filemon_h@" in dev,*/filemon.h) FDEFS="-DHAVE_FILEMON_H -I`dirname @filemon_h@`";; *) FDEFS=;; esac do_compile filemon_@use_filemon@.o filemon/filemon_@use_filemon@.c ${FDEFS} BASE_OBJECTS="filemon_@use_filemon@.o $BASE_OBJECTS" ;; esac do_compile meta.o ${MDEFS} BASE_OBJECTS="meta.o ${BASE_OBJECTS}" ;; esac do_compile job.o ${MDEFS} do_link bmake main.o job.o ${BASE_OBJECTS} ${LST_OBJECTS} ${LIB_OBJECTS} diff --git a/contrib/bmake/make.1 b/contrib/bmake/make.1 index b50a3b4a74b9..dbbff753673a 100644 --- a/contrib/bmake/make.1 +++ b/contrib/bmake/make.1 @@ -1,2481 +1,2496 @@ -.\" $NetBSD: make.1,v 1.296 2021/02/04 21:42:46 rillig Exp $ +.\" $NetBSD: make.1,v 1.300 2021/12/12 20:45:48 sjg Exp $ .\" .\" Copyright (c) 1990, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" from: @(#)make.1 8.4 (Berkeley) 3/19/94 .\" -.Dd December 22, 2020 +.Dd December 12, 2021 .Dt MAKE 1 .Os .Sh NAME .Nm make .Nd maintain program dependencies .Sh SYNOPSIS .Nm .Op Fl BeikNnqrSstWwX .Op Fl C Ar directory .Op Fl D Ar variable .Op Fl d Ar flags .Op Fl f Ar makefile .Op Fl I Ar directory .Op Fl J Ar private .Op Fl j Ar max_jobs .Op Fl m Ar directory .Op Fl T Ar file .Op Fl V Ar variable .Op Fl v Ar variable .Op Ar variable=value .Op Ar target ... .Sh DESCRIPTION .Nm is a program designed to simplify the maintenance of other programs. Its input is a list of specifications as to the files upon which programs and other files depend. If no .Fl f Ar makefile makefile option is given, .Nm will try to open .Ql Pa makefile then .Ql Pa Makefile in order to find the specifications. If the file .Ql Pa .depend exists, it is read (see .Xr mkdep 1 ) . .Pp This manual page is intended as a reference document only. For a more thorough description of .Nm and makefiles, please refer to .%T "PMake \- A Tutorial" . .Pp .Nm will prepend the contents of the .Va MAKEFLAGS environment variable to the command line arguments before parsing them. .Pp The options are as follows: .Bl -tag -width Ds .It Fl B Try to be backwards compatible by executing a single shell per command and by executing the commands to make the sources of a dependency line in sequence. .It Fl C Ar directory Change to .Ar directory before reading the makefiles or doing anything else. If multiple .Fl C options are specified, each is interpreted relative to the previous one: .Fl C Pa / Fl C Pa etc is equivalent to .Fl C Pa /etc . .It Fl D Ar variable Define .Ar variable to be 1, in the global scope. .It Fl d Ar [-]flags Turn on debugging, and specify which portions of .Nm are to print debugging information. Unless the flags are preceded by .Ql \- they are added to the .Va MAKEFLAGS environment variable and will be processed by any child make processes. By default, debugging information is printed to standard error, but this can be changed using the .Ar F debugging flag. The debugging output is always unbuffered; in addition, if debugging is enabled but debugging output is not directed to standard output, then the standard output is line buffered. .Ar Flags is one or more of the following: .Bl -tag -width Ds .It Ar A Print all possible debugging information; equivalent to specifying all of the debugging flags. .It Ar a Print debugging information about archive searching and caching. .It Ar C Print debugging information about current working directory. .It Ar c Print debugging information about conditional evaluation. .It Ar d Print debugging information about directory searching and caching. .It Ar e Print debugging information about failed commands and targets. .It Ar F Ns Oo Sy \&+ Oc Ns Ar filename Specify where debugging output is written. This must be the last flag, because it consumes the remainder of the argument. If the character immediately after the .Ql F flag is .Ql \&+ , then the file will be opened in append mode; otherwise the file will be overwritten. If the file name is .Ql stdout or .Ql stderr then debugging output will be written to the standard output or standard error output file descriptors respectively (and the .Ql \&+ option has no effect). Otherwise, the output will be written to the named file. If the file name ends .Ql .%d then the .Ql %d is replaced by the pid. .It Ar f Print debugging information about loop evaluation. .It Ar "g1" Print the input graph before making anything. .It Ar "g2" Print the input graph after making everything, or before exiting on error. .It Ar "g3" Print the input graph before exiting on error. .It Ar h Print debugging information about hash table operations. .It Ar j Print debugging information about running multiple shells. .It Ar L Turn on lint checks. This will throw errors for variable assignments that do not parse correctly, at the time of assignment so the file and line number are available. .It Ar l Print commands in Makefiles regardless of whether or not they are prefixed by .Ql @ or other "quiet" flags. Also known as "loud" behavior. .It Ar M Print debugging information about "meta" mode decisions about targets. .It Ar m Print debugging information about making targets, including modification dates. .It Ar n Don't delete the temporary command scripts created when running commands. These temporary scripts are created in the directory referred to by the .Ev TMPDIR environment variable, or in .Pa /tmp if .Ev TMPDIR is unset or set to the empty string. The temporary scripts are created by .Xr mkstemp 3 , and have names of the form .Pa makeXXXXXX . .Em NOTE : This can create many files in .Ev TMPDIR or .Pa /tmp , so use with care. .It Ar p Print debugging information about makefile parsing. .It Ar s Print debugging information about suffix-transformation rules. .It Ar t Print debugging information about target list maintenance. .It Ar V Force the .Fl V option to print raw values of variables, overriding the default behavior set via .Va .MAKE.EXPAND_VARIABLES . .It Ar v Print debugging information about variable assignment. .It Ar x Run shell commands with .Fl x so the actual commands are printed as they are executed. .El .It Fl e Specify that environment variables override macro assignments within makefiles. .It Fl f Ar makefile Specify a makefile to read instead of the default .Ql Pa makefile . If .Ar makefile is .Ql Fl , standard input is read. Multiple makefiles may be specified, and are read in the order specified. .It Fl I Ar directory Specify a directory in which to search for makefiles and included makefiles. The system makefile directory (or directories, see the .Fl m option) is automatically included as part of this list. .It Fl i Ignore non-zero exit of shell commands in the makefile. Equivalent to specifying .Ql Fl before each command line in the makefile. .It Fl J Ar private This option should .Em not be specified by the user. .Pp When the .Ar j option is in use in a recursive build, this option is passed by a make to child makes to allow all the make processes in the build to cooperate to avoid overloading the system. .It Fl j Ar max_jobs Specify the maximum number of jobs that .Nm may have running at any one time. The value is saved in .Va .MAKE.JOBS . Turns compatibility mode off, unless the .Ar B flag is also specified. When compatibility mode is off, all commands associated with a target are executed in a single shell invocation as opposed to the traditional one shell invocation per line. This can break traditional scripts which change directories on each command invocation and then expect to start with a fresh environment on the next line. It is more efficient to correct the scripts rather than turn backwards compatibility on. .It Fl k Continue processing after errors are encountered, but only on those targets that do not depend on the target whose creation caused the error. .It Fl m Ar directory Specify a directory in which to search for sys.mk and makefiles included via the .Li \&< Ns Ar file Ns Li \&> Ns -style include statement. The .Fl m option can be used multiple times to form a search path. This path will override the default system include path: /usr/share/mk. Furthermore the system include path will be appended to the search path used for .Li \*q Ns Ar file Ns Li \*q Ns -style include statements (see the .Fl I option). .Pp If a file or directory name in the .Fl m argument (or the .Ev MAKESYSPATH environment variable) starts with the string .Qq \&.../ then .Nm will search for the specified file or directory named in the remaining part of the argument string. The search starts with the current directory of the Makefile and then works upward towards the root of the file system. If the search is successful, then the resulting directory replaces the .Qq \&.../ specification in the .Fl m argument. If used, this feature allows .Nm to easily search in the current source tree for customized sys.mk files (e.g., by using .Qq \&.../mk/sys.mk as an argument). .It Fl n Display the commands that would have been executed, but do not actually execute them unless the target depends on the .MAKE special source (see below) or the command is prefixed with .Ql Ic + . .It Fl N Display the commands which would have been executed, but do not actually execute any of them; useful for debugging top-level makefiles without descending into subdirectories. .It Fl q Do not execute any commands, but exit 0 if the specified targets are up-to-date and 1, otherwise. .It Fl r Do not use the built-in rules specified in the system makefile. .It Fl S Stop processing if an error is encountered. This is the default behavior and the opposite of .Fl k . .It Fl s Do not echo any commands as they are executed. Equivalent to specifying .Ql Ic @ before each command line in the makefile. .It Fl T Ar tracefile When used with the .Fl j flag, append a trace record to .Ar tracefile for each job started and completed. .It Fl t Rather than re-building a target as specified in the makefile, create it or update its modification time to make it appear up-to-date. .It Fl V Ar variable Print the value of .Ar variable . Do not build any targets. Multiple instances of this option may be specified; the variables will be printed one per line, with a blank line for each null or undefined variable. The value printed is extracted from the global scope after all makefiles have been read. By default, the raw variable contents (which may include additional unexpanded variable references) are shown. If .Ar variable contains a .Ql \&$ then the value will be recursively expanded to its complete resultant text before printing. The expanded value will also be printed if .Va .MAKE.EXPAND_VARIABLES is set to true and the .Fl dV option has not been used to override it. Note that loop-local and target-local variables, as well as values taken temporarily by global variables during makefile processing, are not accessible via this option. The .Fl dv debug mode can be used to see these at the cost of generating substantial extraneous output. .It Fl v Ar variable Like .Fl V but the variable is always expanded to its complete value. .It Fl W Treat any warnings during makefile parsing as errors. .It Fl w Print entering and leaving directory messages, pre and post processing. .It Fl X Don't export variables passed on the command line to the environment individually. Variables passed on the command line are still exported via the .Va MAKEFLAGS environment variable. This option may be useful on systems which have a small limit on the size of command arguments. .It Ar variable=value Set the value of the variable .Ar variable to .Ar value . Normally, all values passed on the command line are also exported to sub-makes in the environment. The .Fl X flag disables this behavior. Variable assignments should follow options for POSIX compatibility but no ordering is enforced. .El .Pp There are seven different types of lines in a makefile: file dependency specifications, shell commands, variable assignments, include statements, conditional directives, for loops, and comments. .Pp In general, lines may be continued from one line to the next by ending them with a backslash .Pq Ql \e . The trailing newline character and initial whitespace on the following line are compressed into a single space. .Sh FILE DEPENDENCY SPECIFICATIONS Dependency lines consist of one or more targets, an operator, and zero or more sources. This creates a relationship where the targets .Dq depend on the sources and are customarily created from them. A target is considered out-of-date if it does not exist, or if its modification time is less than that of any of its sources. An out-of-date target will be re-created, but not until all sources have been examined and themselves re-created as needed. Three operators may be used: .Bl -tag -width flag .It Ic \&: Many dependency lines may name this target but only one may have attached shell commands. All sources named in all dependency lines are considered together, and if needed the attached shell commands are run to create or re-create the target. If .Nm is interrupted, the target is removed. .It Ic \&! The same, but the target is always re-created whether or not it is out of date. .It Ic \&:: Any dependency line may have attached shell commands, but each one is handled independently: its sources are considered and the attached shell commands are run if the target is out of date with respect to (only) those sources. Thus, different groups of the attached shell commands may be run depending on the circumstances. Furthermore, unlike .Ic \&:, for dependency lines with no sources, the attached shell commands are always run. Also unlike .Ic \&:, the target will not be removed if .Nm is interrupted. .El All dependency lines mentioning a particular target must use the same operator. .Pp Targets and sources may contain the shell wildcard values .Ql \&? , .Ql * , .Ql [] , and .Ql {} . The values .Ql \&? , .Ql * , and .Ql [] may only be used as part of the final component of the target or source, and must be used to describe existing files. The value .Ql {} need not necessarily be used to describe existing files. Expansion is in directory order, not alphabetically as done in the shell. .Sh SHELL COMMANDS Each target may have associated with it one or more lines of shell commands, normally used to create the target. Each of the lines in this script .Em must be preceded by a tab. (For historical reasons, spaces are not accepted.) While targets can appear in many dependency lines if desired, by default only one of these rules may be followed by a creation script. If the .Ql Ic \&:: operator is used, however, all rules may include scripts and the scripts are executed in the order found. .Pp Each line is treated as a separate shell command, unless the end of line is escaped with a backslash .Pq Ql \e in which case that line and the next are combined. .\" The escaped newline is retained and passed to the shell, which .\" normally ignores it. .\" However, the tab at the beginning of the following line is removed. If the first characters of the command are any combination of .Ql Ic @ , .Ql Ic + , or .Ql Ic \- , the command is treated specially. A .Ql Ic @ causes the command not to be echoed before it is executed. A .Ql Ic + causes the command to be executed even when .Fl n is given. This is similar to the effect of the .MAKE special source, except that the effect can be limited to a single line of a script. A .Ql Ic \- in compatibility mode causes any non-zero exit status of the command line to be ignored. .Pp When .Nm is run in jobs mode with .Fl j Ar max_jobs , the entire script for the target is fed to a single instance of the shell. In compatibility (non-jobs) mode, each command is run in a separate process. If the command contains any shell meta characters .Pq Ql #=|^(){};&<>*?[]:$`\e\en it will be passed to the shell; otherwise .Nm will attempt direct execution. If a line starts with .Ql Ic \- and the shell has ErrCtl enabled then failure of the command line will be ignored as in compatibility mode. Otherwise .Ql Ic \- affects the entire job; the script will stop at the first command line that fails, but the target will not be deemed to have failed. .Pp Makefiles should be written so that the mode of .Nm operation does not change their behavior. For example, any command which needs to use .Dq cd or .Dq chdir without potentially changing the directory for subsequent commands should be put in parentheses so it executes in a subshell. To force the use of one shell, escape the line breaks so as to make the whole script one command. For example: .Bd -literal -offset indent avoid-chdir-side-effects: @echo Building $@ in `pwd` @(cd ${.CURDIR} && ${MAKE} $@) @echo Back in `pwd` ensure-one-shell-regardless-of-mode: @echo Building $@ in `pwd`; \e (cd ${.CURDIR} && ${MAKE} $@); \e echo Back in `pwd` .Ed .Pp Since .Nm will .Xr chdir 2 to .Ql Va .OBJDIR before executing any targets, each child process starts with that as its current working directory. .Sh VARIABLE ASSIGNMENTS Variables in make are much like variables in the shell, and, by tradition, consist of all upper-case letters. .Ss Variable assignment modifiers The five operators that can be used to assign values to variables are as follows: .Bl -tag -width Ds .It Ic \&= Assign the value to the variable. Any previous value is overridden. .It Ic \&+= Append the value to the current value of the variable. .It Ic \&?= Assign the value to the variable if it is not already defined. .It Ic \&:= Assign with expansion, i.e. expand the value before assigning it to the variable. Normally, expansion is not done until the variable is referenced. .Em NOTE : References to undefined variables are .Em not expanded. This can cause problems when variable modifiers are used. .It Ic \&!= Expand the value and pass it to the shell for execution and assign the result to the variable. Any newlines in the result are replaced with spaces. .El .Pp Any white-space before the assigned .Ar value is removed; if the value is being appended, a single space is inserted between the previous contents of the variable and the appended value. .Pp Variables are expanded by surrounding the variable name with either curly braces .Pq Ql {} or parentheses .Pq Ql () and preceding it with a dollar sign .Pq Ql \&$ . If the variable name contains only a single letter, the surrounding braces or parentheses are not required. This shorter form is not recommended. .Pp If the variable name contains a dollar, then the name itself is expanded first. This allows almost arbitrary variable names, however names containing dollar, braces, parentheses, or whitespace are really best avoided! .Pp If the result of expanding a variable contains a dollar sign .Pq Ql \&$ the string is expanded again. .Pp Variable substitution occurs at three distinct times, depending on where the variable is being used. .Bl -enum .It Variables in dependency lines are expanded as the line is read. .It Variables in shell commands are expanded when the shell command is executed. .It .Dq .for loop index variables are expanded on each loop iteration. Note that other variables are not expanded inside loops so the following example code: .Bd -literal -offset indent .Dv .for i in 1 2 3 a+= ${i} j= ${i} b+= ${j} .Dv .endfor all: @echo ${a} @echo ${b} .Ed will print: .Bd -literal -offset indent 1 2 3 3 3 3 .Ed Because while ${a} contains .Dq 1 2 3 after the loop is executed, ${b} contains .Dq ${j} ${j} ${j} which expands to .Dq 3 3 3 since after the loop completes ${j} contains .Dq 3 . .El .Ss Variable classes The four different classes of variables (in order of increasing precedence) are: .Bl -tag -width Ds .It Environment variables Variables defined as part of .Nm Ns 's environment. .It Global variables Variables defined in the makefile or in included makefiles. .It Command line variables Variables defined as part of the command line. .It Local variables Variables that are defined specific to a certain target. .El .Pp Local variables are all built in and their values vary magically from target to target. It is not currently possible to define new local variables. The seven local variables are as follows: .Bl -tag -width ".ARCHIVE" -offset indent .It Va .ALLSRC The list of all sources for this target; also known as .Ql Va \&> . .It Va .ARCHIVE The name of the archive file; also known as .Ql Va \&! . .It Va .IMPSRC In suffix-transformation rules, the name/path of the source from which the target is to be transformed (the .Dq implied source); also known as .Ql Va \&< . It is not defined in explicit rules. .It Va .MEMBER The name of the archive member; also known as .Ql Va % . .It Va .OODATE The list of sources for this target that were deemed out-of-date; also known as .Ql Va \&? . .It Va .PREFIX The file prefix of the target, containing only the file portion, no suffix or preceding directory components; also known as .Ql Va * . The suffix must be one of the known suffixes declared with .Ic .SUFFIXES or it will not be recognized. .It Va .TARGET The name of the target; also known as .Ql Va @ . For compatibility with other makes this is an alias for .Ic .ARCHIVE in archive member rules. .El .Pp The shorter forms .Ql ( Va > , .Ql Va \&! , .Ql Va < , .Ql Va % , .Ql Va \&? , .Ql Va * , and .Ql Va @ ) are permitted for backward compatibility with historical makefiles and legacy POSIX make and are not recommended. .Pp Variants of these variables with the punctuation followed immediately by .Ql D or .Ql F , e.g. .Ql Va $(@D) , are legacy forms equivalent to using the .Ql :H and .Ql :T modifiers. These forms are accepted for compatibility with .At V makefiles and POSIX but are not recommended. .Pp Four of the local variables may be used in sources on dependency lines because they expand to the proper value for each target on the line. These variables are .Ql Va .TARGET , .Ql Va .PREFIX , .Ql Va .ARCHIVE , and .Ql Va .MEMBER . .Ss Additional built-in variables In addition, .Nm sets or knows about the following variables: .Bl -tag -width .MAKEOVERRIDES .It Va \&$ A single dollar sign .Ql \&$ , i.e. .Ql \&$$ expands to a single dollar sign. .It Va .ALLTARGETS The list of all targets encountered in the Makefile. If evaluated during Makefile parsing, lists only those targets encountered thus far. .It Va .CURDIR A path to the directory where .Nm was executed. Refer to the description of .Ql Ev PWD for more details. .It Va .INCLUDEDFROMDIR The directory of the file this Makefile was included from. .It Va .INCLUDEDFROMFILE The filename of the file this Makefile was included from. .It Ev MAKE The name that .Nm was executed with .Pq Va argv[0] . For compatibility .Nm also sets .Va .MAKE with the same value. The preferred variable to use is the environment variable .Ev MAKE because it is more compatible with other versions of .Nm and cannot be confused with the special target with the same name. .It Va .MAKE.ALWAYS_PASS_JOB_QUEUE Tells .Nm whether to pass the descriptors of the job token queue even if the target is not tagged with .Ic .MAKE The default is .Ql Pa yes for backwards compatability with .Fx 9.0 and earlier. .It Va .MAKE.DEPENDFILE Names the makefile (default .Ql Pa .depend ) from which generated dependencies are read. .It Va .MAKE.EXPAND_VARIABLES A boolean that controls the default behavior of the .Fl V option. If true, variable values printed with .Fl V are fully expanded; if false, the raw variable contents (which may include additional unexpanded variable references) are shown. .It Va .MAKE.EXPORTED The list of variables exported by .Nm . .It Va .MAKE.JOBS The argument to the .Fl j option. .It Va .MAKE.JOB.PREFIX If .Nm is run with .Ar j then output for each target is prefixed with a token .Ql --- target --- the first part of which can be controlled via .Va .MAKE.JOB.PREFIX . If .Va .MAKE.JOB.PREFIX is empty, no token is printed. .br For example: .Li .MAKE.JOB.PREFIX=${.newline}---${.MAKE:T}[${.MAKE.PID}] would produce tokens like .Ql ---make[1234] target --- making it easier to track the degree of parallelism being achieved. .It Ev MAKEFLAGS The environment variable .Ql Ev MAKEFLAGS may contain anything that may be specified on .Nm Ns 's command line. Anything specified on .Nm Ns 's command line is appended to the .Ql Ev MAKEFLAGS variable which is then entered into the environment for all programs which .Nm executes. .It Va .MAKE.LEVEL The recursion depth of .Nm . The initial instance of .Nm will be 0, and an incremented value is put into the environment to be seen by the next generation. This allows tests like: .Li .if ${.MAKE.LEVEL} == 0 to protect things which should only be evaluated in the initial instance of .Nm . .It Va .MAKE.MAKEFILE_PREFERENCE The ordered list of makefile names (default .Ql Pa makefile , .Ql Pa Makefile ) that .Nm will look for. .It Va .MAKE.MAKEFILES The list of makefiles read by .Nm , which is useful for tracking dependencies. Each makefile is recorded only once, regardless of the number of times read. .It Va .MAKE.MODE Processed after reading all makefiles. Can affect the mode that .Nm runs in. It can contain a number of keywords: .Bl -hang -width missing-filemon=bf. .It Pa compat Like .Fl B , puts .Nm into "compat" mode. .It Pa meta Puts .Nm into "meta" mode, where meta files are created for each target to capture the command run, the output generated and if .Xr filemon 4 is available, the system calls which are of interest to .Nm . The captured output can be very useful when diagnosing errors. .It Pa curdirOk= Ar bf Normally .Nm will not create .meta files in .Ql Va .CURDIR . This can be overridden by setting .Va bf to a value which represents True. .It Pa missing-meta= Ar bf If .Va bf is True, then a missing .meta file makes the target out-of-date. .It Pa missing-filemon= Ar bf If .Va bf is True, then missing filemon data makes the target out-of-date. .It Pa nofilemon Do not use .Xr filemon 4 . .It Pa env For debugging, it can be useful to include the environment in the .meta file. .It Pa verbose If in "meta" mode, print a clue about the target being built. This is useful if the build is otherwise running silently. The message printed the value of: .Va .MAKE.META.PREFIX . .It Pa ignore-cmd Some makefiles have commands which are simply not stable. This keyword causes them to be ignored for determining whether a target is out of date in "meta" mode. See also .Ic .NOMETA_CMP . .It Pa silent= Ar bf If .Va bf is True, when a .meta file is created, mark the target .Ic .SILENT . .El .It Va .MAKE.META.BAILIWICK In "meta" mode, provides a list of prefixes which match the directories controlled by .Nm . If a file that was generated outside of .Va .OBJDIR but within said bailiwick is missing, the current target is considered out-of-date. .It Va .MAKE.META.CREATED In "meta" mode, this variable contains a list of all the meta files updated. If not empty, it can be used to trigger processing of .Va .MAKE.META.FILES . .It Va .MAKE.META.FILES In "meta" mode, this variable contains a list of all the meta files used (updated or not). This list can be used to process the meta files to extract dependency information. .It Va .MAKE.META.IGNORE_PATHS Provides a list of path prefixes that should be ignored; because the contents are expected to change over time. The default list includes: .Ql Pa /dev /etc /proc /tmp /var/run /var/tmp .It Va .MAKE.META.IGNORE_PATTERNS Provides a list of patterns to match against pathnames. Ignore any that match. .It Va .MAKE.META.IGNORE_FILTER Provides a list of variable modifiers to apply to each pathname. Ignore if the expansion is an empty string. .It Va .MAKE.META.PREFIX Defines the message printed for each meta file updated in "meta verbose" mode. The default value is: .Dl Building ${.TARGET:H:tA}/${.TARGET:T} .It Va .MAKEOVERRIDES This variable is used to record the names of variables assigned to on the command line, so that they may be exported as part of .Ql Ev MAKEFLAGS . This behavior can be disabled by assigning an empty value to .Ql Va .MAKEOVERRIDES within a makefile. Extra variables can be exported from a makefile by appending their names to .Ql Va .MAKEOVERRIDES . .Ql Ev MAKEFLAGS is re-exported whenever .Ql Va .MAKEOVERRIDES is modified. .It Va .MAKE.PATH_FILEMON If .Nm was built with .Xr filemon 4 support, this is set to the path of the device node. This allows makefiles to test for this support. .It Va .MAKE.PID The process-id of .Nm . .It Va .MAKE.PPID The parent process-id of .Nm . .It Va .MAKE.SAVE_DOLLARS value should be a boolean that controls whether .Ql $$ are preserved when doing .Ql := assignments. The default is false, for backwards compatibility. Set to true for compatability with other makes. If set to false, .Ql $$ becomes .Ql $ per normal evaluation rules. .It Va .MAKE.UID The user-id running .Nm . .It Va .MAKE.GID The group-id running .Nm . .It Va MAKE_PRINT_VAR_ON_ERROR When .Nm stops due to an error, it sets .Ql Va .ERROR_TARGET to the name of the target that failed, .Ql Va .ERROR_CMD to the commands of the failed target, and in "meta" mode, it also sets .Ql Va .ERROR_CWD to the .Xr getcwd 3 , and .Ql Va .ERROR_META_FILE to the path of the meta file (if any) describing the failed target. It then prints its name and the value of .Ql Va .CURDIR as well as the value of any variables named in .Ql Va MAKE_PRINT_VAR_ON_ERROR . .It Va .newline This variable is simply assigned a newline character as its value. This allows expansions using the .Cm \&:@ modifier to put a newline between iterations of the loop rather than a space. For example, the printing of .Ql Va MAKE_PRINT_VAR_ON_ERROR could be done as ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@}. .It Va .OBJDIR A path to the directory where the targets are built. Its value is determined by trying to .Xr chdir 2 to the following directories in order and using the first match: .Bl -enum .It .Ev ${MAKEOBJDIRPREFIX}${.CURDIR} .Pp (Only if .Ql Ev MAKEOBJDIRPREFIX is set in the environment or on the command line.) .It .Ev ${MAKEOBJDIR} .Pp (Only if .Ql Ev MAKEOBJDIR is set in the environment or on the command line.) .It .Ev ${.CURDIR} Ns Pa /obj. Ns Ev ${MACHINE} .It .Ev ${.CURDIR} Ns Pa /obj .It .Pa /usr/obj/ Ns Ev ${.CURDIR} .It .Ev ${.CURDIR} .El .Pp Variable expansion is performed on the value before it's used, so expressions such as .Dl ${.CURDIR:S,^/usr/src,/var/obj,} may be used. This is especially useful with .Ql Ev MAKEOBJDIR . .Pp .Ql Va .OBJDIR may be modified in the makefile via the special target .Ql Ic .OBJDIR . In all cases, .Nm will .Xr chdir 2 to the specified directory if it exists, and set .Ql Va .OBJDIR and .Ql Ev PWD to that directory before executing any targets. .Pp Except in the case of an explicit .Ql Ic .OBJDIR target, .Nm will check that the specified directory is writable and ignore it if not. This check can be skipped by setting the environment variable .Ql Ev MAKE_OBJDIR_CHECK_WRITABLE to "no". . .It Va .PARSEDIR A path to the directory of the current .Ql Pa Makefile being parsed. .It Va .PARSEFILE The basename of the current .Ql Pa Makefile being parsed. This variable and .Ql Va .PARSEDIR are both set only while the .Ql Pa Makefiles are being parsed. If you want to retain their current values, assign them to a variable using assignment with expansion: .Pq Ql Cm \&:= . .It Va .PATH A variable that represents the list of directories that .Nm will search for files. The search list should be updated using the target .Ql Va .PATH rather than the variable. .It Ev PWD Alternate path to the current directory. .Nm normally sets .Ql Va .CURDIR to the canonical path given by .Xr getcwd 3 . However, if the environment variable .Ql Ev PWD is set and gives a path to the current directory, then .Nm sets .Ql Va .CURDIR to the value of .Ql Ev PWD instead. This behavior is disabled if .Ql Ev MAKEOBJDIRPREFIX is set or .Ql Ev MAKEOBJDIR contains a variable transform. .Ql Ev PWD is set to the value of .Ql Va .OBJDIR for all programs which .Nm executes. .It Ev .SHELL The pathname of the shell used to run target scripts. It is read-only. +.It Ev .SUFFIXES +The list of known suffixes. +It is read-only. .It Ev .TARGETS The list of targets explicitly specified on the command line, if any. .It Ev VPATH Colon-separated .Pq Dq \&: lists of directories that .Nm will search for files. The variable is supported for compatibility with old make programs only, use .Ql Va .PATH instead. .El .Ss Variable modifiers Variable expansion may be modified to select or modify each word of the variable (where a .Dq word is white-space delimited sequence of characters). The general format of a variable expansion is as follows: .Pp .Dl ${variable[:modifier[:...]]} .Pp Each modifier begins with a colon, which may be escaped with a backslash .Pq Ql \e . .Pp A set of modifiers can be specified via a variable, as follows: .Pp .Dl modifier_variable=modifier[:...] .Dl ${variable:${modifier_variable}[:...]} .Pp In this case the first modifier in the modifier_variable does not start with a colon, since that must appear in the referencing variable. If any of the modifiers in the modifier_variable contain a dollar sign .Pq Ql $ , these must be doubled to avoid early expansion. .Pp The supported modifiers are: .Bl -tag -width EEE .It Cm \&:E Replaces each word in the variable with its suffix. .It Cm \&:H Replaces each word in the variable with everything but the last component. .It Cm \&:M Ns Ar pattern Selects only those words that match .Ar pattern . The standard shell wildcard characters .Pf ( Ql * , .Ql \&? , and .Ql Oo Oc ) may be used. The wildcard characters may be escaped with a backslash .Pq Ql \e . As a consequence of the way values are split into words, matched, and then joined, a construct like .Dl ${VAR:M*} will normalize the inter-word spacing, removing all leading and trailing space, and converting multiple consecutive spaces to single spaces. . .It Cm \&:N Ns Ar pattern This is identical to .Ql Cm \&:M , but selects all words which do not match .Ar pattern . .It Cm \&:O Orders every word in variable alphabetically. +.It Cm \&:On +Orders every word in variable numerically. +A number followed by one of +.Ql k , +.Ql M +or +.Ql G +is multiplied by the appropriate factor (1024 (k), 1048576 (M), or +1073741824 (G)). +Both upper- and lower-case letters are accepted. .It Cm \&:Or Orders every word in variable in reverse alphabetical order. +.It Cm \&:Orn +Orders every word in variable in reverse numerical order. .It Cm \&:Ox Shuffles the words in variable. The results will be different each time you are referring to the modified variable; use the assignment with expansion .Pq Ql Cm \&:= to prevent such behavior. For example, .Bd -literal -offset indent LIST= uno due tre quattro RANDOM_LIST= ${LIST:Ox} STATIC_RANDOM_LIST:= ${LIST:Ox} all: @echo "${RANDOM_LIST}" @echo "${RANDOM_LIST}" @echo "${STATIC_RANDOM_LIST}" @echo "${STATIC_RANDOM_LIST}" .Ed may produce output similar to: .Bd -literal -offset indent quattro due tre uno tre due quattro uno due uno quattro tre due uno quattro tre .Ed .It Cm \&:Q Quotes every shell meta-character in the variable, so that it can be passed safely to the shell. .It Cm \&:q Quotes every shell meta-character in the variable, and also doubles .Sq $ characters so that it can be passed safely through recursive invocations of .Nm . This is equivalent to: .Sq \&:S/\e\&$/&&/g:Q . .It Cm \&:R Replaces each word in the variable with everything but its suffix. .It Cm \&:range[=count] The value is an integer sequence representing the words of the original value, or the supplied .Va count . .It Cm \&:gmtime[=utc] The value is a format string for .Xr strftime 3 , using .Xr gmtime 3 . If a .Va utc value is not provided or is 0, the current time is used. .It Cm \&:hash Computes a 32-bit hash of the value and encode it as hex digits. .It Cm \&:localtime[=utc] The value is a format string for .Xr strftime 3 , using .Xr localtime 3 . If a .Va utc value is not provided or is 0, the current time is used. .It Cm \&:tA Attempts to convert variable to an absolute path using .Xr realpath 3 , if that fails, the value is unchanged. .It Cm \&:tl Converts variable to lower-case letters. .It Cm \&:ts Ns Ar c Words in the variable are normally separated by a space on expansion. This modifier sets the separator to the character .Ar c . If .Ar c is omitted, then no separator is used. The common escapes (including octal numeric codes) work as expected. .It Cm \&:tu Converts variable to upper-case letters. .It Cm \&:tW Causes the value to be treated as a single word (possibly containing embedded white space). See also .Ql Cm \&:[*] . .It Cm \&:tw Causes the value to be treated as a sequence of words delimited by white space. See also .Ql Cm \&:[@] . .Sm off .It Cm \&:S No \&/ Ar old_string No \&/ Ar new_string No \&/ Op Cm 1gW .Sm on Modifies the first occurrence of .Ar old_string in each word of the variable's value, replacing it with .Ar new_string . If a .Ql g is appended to the last delimiter of the pattern, all occurrences in each word are replaced. If a .Ql 1 is appended to the last delimiter of the pattern, only the first occurrence is affected. If a .Ql W is appended to the last delimiter of the pattern, then the value is treated as a single word (possibly containing embedded white space). If .Ar old_string begins with a caret .Pq Ql ^ , .Ar old_string is anchored at the beginning of each word. If .Ar old_string ends with a dollar sign .Pq Ql \&$ , it is anchored at the end of each word. Inside .Ar new_string , an ampersand .Pq Ql & is replaced by .Ar old_string (without any .Ql ^ or .Ql \&$ ) . Any character may be used as a delimiter for the parts of the modifier string. The anchoring, ampersand and delimiter characters may be escaped with a backslash .Pq Ql \e . .Pp Variable expansion occurs in the normal fashion inside both .Ar old_string and .Ar new_string with the single exception that a backslash is used to prevent the expansion of a dollar sign .Pq Ql \&$ , not a preceding dollar sign as is usual. .Sm off .It Cm \&:C No \&/ Ar pattern No \&/ Ar replacement No \&/ Op Cm 1gW .Sm on The .Cm \&:C modifier is just like the .Cm \&:S modifier except that the old and new strings, instead of being simple strings, are an extended regular expression (see .Xr regex 3 ) string .Ar pattern and an .Xr ed 1 Ns \-style string .Ar replacement . Normally, the first occurrence of the pattern .Ar pattern in each word of the value is substituted with .Ar replacement . The .Ql 1 modifier causes the substitution to apply to at most one word; the .Ql g modifier causes the substitution to apply to as many instances of the search pattern .Ar pattern as occur in the word or words it is found in; the .Ql W modifier causes the value to be treated as a single word (possibly containing embedded white space). .Pp As for the .Cm \&:S modifier, the .Ar pattern and .Ar replacement are subjected to variable expansion before being parsed as regular expressions. .It Cm \&:T Replaces each word in the variable with its last path component. .It Cm \&:u Removes adjacent duplicate words (like .Xr uniq 1 ) . .Sm off .It Cm \&:\&? Ar true_string Cm \&: Ar false_string .Sm on If the variable name (not its value), when parsed as a .if conditional expression, evaluates to true, return as its value the .Ar true_string , otherwise return the .Ar false_string . Since the variable name is used as the expression, \&:\&? must be the first modifier after the variable name itself - which will, of course, usually contain variable expansions. A common error is trying to use expressions like .Dl ${NUMBERS:M42:?match:no} which actually tests defined(NUMBERS), to determine if any words match "42" you need to use something like: .Dl ${"${NUMBERS:M42}" != \&"\&":?match:no} . .It Ar :old_string=new_string This is the .At V style variable substitution. It must be the last modifier specified. If .Ar old_string or .Ar new_string do not contain the pattern matching character .Ar % then it is assumed that they are anchored at the end of each word, so only suffixes or entire words may be replaced. Otherwise .Ar % is the substring of .Ar old_string to be replaced in .Ar new_string . If only .Ar old_string contains the pattern matching character .Ar % , and .Ar old_string matches, then the result is the .Ar new_string . If only the .Ar new_string contains the pattern matching character .Ar % , then it is not treated specially and it is printed as a literal .Ar % on match. If there is more than one pattern matching character .Ar ( % ) in either the .Ar new_string or .Ar old_string , only the first instance is treated specially (as the pattern character); all subsequent instances are treated as regular characters. .Pp Variable expansion occurs in the normal fashion inside both .Ar old_string and .Ar new_string with the single exception that a backslash is used to prevent the expansion of a dollar sign .Pq Ql \&$ , not a preceding dollar sign as is usual. .Sm off .It Cm \&:@ Ar temp Cm @ Ar string Cm @ .Sm on This is the loop expansion mechanism from the OSF Development Environment (ODE) make. Unlike .Cm \&.for loops, expansion occurs at the time of reference. Assigns .Ar temp to each word in the variable and evaluates .Ar string . The ODE convention is that .Ar temp should start and end with a period. For example. .Dl ${LINKS:@.LINK.@${LN} ${TARGET} ${.LINK.}@} .Pp However a single character variable is often more readable: .Dl ${MAKE_PRINT_VAR_ON_ERROR:@v@$v='${$v}'${.newline}@} .It Cm \&:_[=var] Saves the current variable value in .Ql $_ or the named .Va var for later reference. Example usage: .Bd -literal -offset indent M_cmpv.units = 1 1000 1000000 M_cmpv = S,., ,g:_:range:@i@+ $${_:[-$$i]} \&\\ \\* $${M_cmpv.units:[$$i]}@:S,^,expr 0 ,1:sh .Dv .if ${VERSION:${M_cmpv}} < ${3.1.12:L:${M_cmpv}} .Ed Here .Ql $_ is used to save the result of the .Ql :S modifier which is later referenced using the index values from .Ql :range . .It Cm \&:U Ns Ar newval If the variable is undefined, .Ar newval is the value. If the variable is defined, the existing value is returned. This is another ODE make feature. It is handy for setting per-target CFLAGS for instance: .Dl ${_${.TARGET:T}_CFLAGS:U${DEF_CFLAGS}} If a value is only required if the variable is undefined, use: .Dl ${VAR:D:Unewval} .It Cm \&:D Ns Ar newval If the variable is defined, .Ar newval is the value. .It Cm \&:L The name of the variable is the value. .It Cm \&:P The path of the node which has the same name as the variable is the value. If no such node exists or its path is null, then the name of the variable is used. In order for this modifier to work, the name (node) must at least have appeared on the rhs of a dependency. .Sm off .It Cm \&:\&! Ar cmd Cm \&! .Sm on The output of running .Ar cmd is the value. .It Cm \&:sh If the variable is non-empty it is run as a command and the output becomes the new value. .It Cm \&::= Ns Ar str The variable is assigned the value .Ar str after substitution. This modifier and its variations are useful in obscure situations such as wanting to set a variable when shell commands are being parsed. These assignment modifiers always expand to nothing, so if appearing in a rule line by themselves should be preceded with something to keep .Nm happy. .Pp The .Ql Cm \&:: helps avoid false matches with the .At V style .Cm \&:= modifier and since substitution always occurs the .Cm \&::= form is vaguely appropriate. .It Cm \&::?= Ns Ar str As for .Cm \&::= but only if the variable does not already have a value. .It Cm \&::+= Ns Ar str Append .Ar str to the variable. .It Cm \&::!= Ns Ar cmd Assign the output of .Ar cmd to the variable. .It Cm \&:\&[ Ns Ar range Ns Cm \&] Selects one or more words from the value, or performs other operations related to the way in which the value is divided into words. .Pp Ordinarily, a value is treated as a sequence of words delimited by white space. Some modifiers suppress this behavior, causing a value to be treated as a single word (possibly containing embedded white space). An empty value, or a value that consists entirely of white-space, is treated as a single word. For the purposes of the .Ql Cm \&:[] modifier, the words are indexed both forwards using positive integers (where index 1 represents the first word), and backwards using negative integers (where index \-1 represents the last word). .Pp The .Ar range is subjected to variable expansion, and the expanded result is then interpreted as follows: .Bl -tag -width index .\" :[n] .It Ar index Selects a single word from the value. .\" :[start..end] .It Ar start Ns Cm \&.. Ns Ar end Selects all words from .Ar start to .Ar end , inclusive. For example, .Ql Cm \&:[2..-1] selects all words from the second word to the last word. If .Ar start is greater than .Ar end , then the words are output in reverse order. For example, .Ql Cm \&:[-1..1] selects all the words from last to first. If the list is already ordered, then this effectively reverses the list, but it is more efficient to use .Ql Cm \&:Or instead of .Ql Cm \&:O:[-1..1] . .\" :[*] .It Cm \&* Causes subsequent modifiers to treat the value as a single word (possibly containing embedded white space). Analogous to the effect of \&"$*\&" in Bourne shell. .\" :[0] .It 0 Means the same as .Ql Cm \&:[*] . .\" :[*] .It Cm \&@ Causes subsequent modifiers to treat the value as a sequence of words delimited by white space. Analogous to the effect of \&"$@\&" in Bourne shell. .\" :[#] .It Cm \&# Returns the number of words in the value. .El \" :[range] .El .Sh INCLUDE STATEMENTS, CONDITIONALS AND FOR LOOPS Makefile inclusion, conditional structures and for loops reminiscent of the C programming language are provided in .Nm . All such structures are identified by a line beginning with a single dot .Pq Ql \&. character. Files are included with either .Cm \&.include \&< Ns Ar file Ns Cm \&> or .Cm \&.include \&\*q Ns Ar file Ns Cm \&\*q . Variables between the angle brackets or double quotes are expanded to form the file name. If angle brackets are used, the included makefile is expected to be in the system makefile directory. If double quotes are used, the including makefile's directory and any directories specified using the .Fl I option are searched before the system makefile directory. For compatibility with other versions of .Nm .Ql include file ... is also accepted. .Pp If the include statement is written as .Cm .-include or as .Cm .sinclude then errors locating and/or opening include files are ignored. .Pp If the include statement is written as .Cm .dinclude not only are errors locating and/or opening include files ignored, but stale dependencies within the included file will be ignored just like .Va .MAKE.DEPENDFILE . .Pp Conditional expressions are also preceded by a single dot as the first character of a line. The possible conditionals are as follows: .Bl -tag -width Ds .It Ic .error Ar message The message is printed along with the name of the makefile and line number, then .Nm will exit immediately. .It Ic .export Ar variable ... Export the specified global variable. If no variable list is provided, all globals are exported except for internal variables (those that start with .Ql \&. ) . This is not affected by the .Fl X flag, so should be used with caution. For compatibility with other .Nm programs .Ql export variable=value is also accepted. .Pp Appending a variable name to .Va .MAKE.EXPORTED is equivalent to exporting a variable. .It Ic .export-env Ar variable ... The same as .Ql .export , except that the variable is not appended to .Va .MAKE.EXPORTED . This allows exporting a value to the environment which is different from that used by .Nm internally. .It Ic .export-literal Ar variable ... The same as .Ql .export-env , except that variables in the value are not expanded. .It Ic .info Ar message The message is printed along with the name of the makefile and line number. .It Ic .undef Ar variable ... Un-define the specified global variables. Only global variables can be un-defined. .It Ic .unexport Ar variable ... The opposite of .Ql .export . The specified global .Va variable will be removed from .Va .MAKE.EXPORTED . If no variable list is provided, all globals are unexported, and .Va .MAKE.EXPORTED deleted. .It Ic .unexport-env Unexport all globals previously exported and clear the environment inherited from the parent. This operation will cause a memory leak of the original environment, so should be used sparingly. Testing for .Va .MAKE.LEVEL being 0, would make sense. Also note that any variables which originated in the parent environment should be explicitly preserved if desired. For example: .Bd -literal -offset indent .Li .if ${.MAKE.LEVEL} == 0 PATH := ${PATH} .Li .unexport-env .Li .export PATH .Li .endif .Pp .Ed Would result in an environment containing only .Ql Ev PATH , which is the minimal useful environment. Actually .Ql Ev .MAKE.LEVEL will also be pushed into the new environment. .It Ic .warning Ar message The message prefixed by .Ql Pa warning: is printed along with the name of the makefile and line number. .It Ic \&.if Oo \&! Oc Ns Ar expression Op Ar operator expression ... Test the value of an expression. .It Ic .ifdef Oo \&! Oc Ns Ar variable Op Ar operator variable ... Test the value of a variable. .It Ic .ifndef Oo \&! Oc Ns Ar variable Op Ar operator variable ... Test the value of a variable. .It Ic .ifmake Oo \&! Oc Ns Ar target Op Ar operator target ... Test the target being built. .It Ic .ifnmake Oo \&! Ns Oc Ar target Op Ar operator target ... Test the target being built. .It Ic .else Reverse the sense of the last conditional. .It Ic .elif Oo \&! Ns Oc Ar expression Op Ar operator expression ... A combination of .Ql Ic .else followed by .Ql Ic .if . .It Ic .elifdef Oo \&! Oc Ns Ar variable Op Ar operator variable ... A combination of .Ql Ic .else followed by .Ql Ic .ifdef . .It Ic .elifndef Oo \&! Oc Ns Ar variable Op Ar operator variable ... A combination of .Ql Ic .else followed by .Ql Ic .ifndef . .It Ic .elifmake Oo \&! Oc Ns Ar target Op Ar operator target ... A combination of .Ql Ic .else followed by .Ql Ic .ifmake . .It Ic .elifnmake Oo \&! Oc Ns Ar target Op Ar operator target ... A combination of .Ql Ic .else followed by .Ql Ic .ifnmake . .It Ic .endif End the body of the conditional. .El .Pp The .Ar operator may be any one of the following: .Bl -tag -width "Cm XX" .It Cm \&|\&| Logical OR. .It Cm \&&& Logical .Tn AND ; of higher precedence than .Dq \&|\&| . .El .Pp As in C, .Nm will only evaluate a conditional as far as is necessary to determine its value. Parentheses may be used to change the order of evaluation. The boolean operator .Ql Ic \&! may be used to logically negate an entire conditional. It is of higher precedence than .Ql Ic \&&& . .Pp The value of .Ar expression may be any of the following: .Bl -tag -width defined .It Ic defined Takes a variable name as an argument and evaluates to true if the variable has been defined. .It Ic make Takes a target name as an argument and evaluates to true if the target was specified as part of .Nm Ns 's command line or was declared the default target (either implicitly or explicitly, see .Va .MAIN ) before the line containing the conditional. .It Ic empty Takes a variable, with possible modifiers, and evaluates to true if the expansion of the variable would result in an empty string. .It Ic exists Takes a file name as an argument and evaluates to true if the file exists. The file is searched for on the system search path (see .Va .PATH ) . .It Ic target Takes a target name as an argument and evaluates to true if the target has been defined. .It Ic commands Takes a target name as an argument and evaluates to true if the target has been defined and has commands associated with it. .El .Pp .Ar Expression may also be an arithmetic or string comparison. Variable expansion is performed on both sides of the comparison, after which the numerical values are compared. A value is interpreted as hexadecimal if it is preceded by 0x, otherwise it is decimal; octal numbers are not supported. The standard C relational operators are all supported. If after variable expansion, either the left or right hand side of a .Ql Ic == or .Ql Ic "!=" operator is not a numerical value, then string comparison is performed between the expanded variables. If no relational operator is given, it is assumed that the expanded variable is being compared against 0, or an empty string in the case of a string comparison. .Pp When .Nm is evaluating one of these conditional expressions, and it encounters a (white-space separated) word it doesn't recognize, either the .Dq make or .Dq defined expression is applied to it, depending on the form of the conditional. If the form is .Ql Ic .ifdef , .Ql Ic .ifndef , or .Ql Ic .if the .Dq defined expression is applied. Similarly, if the form is .Ql Ic .ifmake or .Ql Ic .ifnmake , the .Dq make expression is applied. .Pp If the conditional evaluates to true the parsing of the makefile continues as before. If it evaluates to false, the following lines are skipped. In both cases this continues until a .Ql Ic .else or .Ql Ic .endif is found. .Pp For loops are typically used to apply a set of rules to a list of files. The syntax of a for loop is: .Pp .Bl -tag -compact -width Ds .It Ic \&.for Ar variable Oo Ar variable ... Oc Ic in Ar expression .It Aq make-lines .It Ic \&.endfor .El .Pp After the for .Ic expression is evaluated, it is split into words. On each iteration of the loop, one word is taken and assigned to each .Ic variable , in order, and these .Ic variables are substituted into the .Ic make-lines inside the body of the for loop. The number of words must come out even; that is, if there are three iteration variables, the number of words provided must be a multiple of three. .Sh COMMENTS Comments begin with a hash .Pq Ql \&# character, anywhere but in a shell command line, and continue to the end of an unescaped new line. .Sh SPECIAL SOURCES (ATTRIBUTES) .Bl -tag -width .IGNOREx .It Ic .EXEC Target is never out of date, but always execute commands anyway. .It Ic .IGNORE Ignore any errors from the commands associated with this target, exactly as if they all were preceded by a dash .Pq Ql \- . .\" .It Ic .INVISIBLE .\" XXX .\" .It Ic .JOIN .\" XXX .It Ic .MADE Mark all sources of this target as being up-to-date. .It Ic .MAKE Execute the commands associated with this target even if the .Fl n or .Fl t options were specified. Normally used to mark recursive .Nm Ns s . .It Ic .META Create a meta file for the target, even if it is flagged as .Ic .PHONY , .Ic .MAKE , or .Ic .SPECIAL . Usage in conjunction with .Ic .MAKE is the most likely case. In "meta" mode, the target is out-of-date if the meta file is missing. .It Ic .NOMETA Do not create a meta file for the target. Meta files are also not created for .Ic .PHONY , .Ic .MAKE , or .Ic .SPECIAL targets. .It Ic .NOMETA_CMP Ignore differences in commands when deciding if target is out of date. This is useful if the command contains a value which always changes. If the number of commands change, though, the target will still be out of date. The same effect applies to any command line that uses the variable .Va .OODATE , which can be used for that purpose even when not otherwise needed or desired: .Bd -literal -offset indent skip-compare-for-some: @echo this will be compared @echo this will not ${.OODATE:M.NOMETA_CMP} @echo this will also be compared .Ed The .Cm \&:M pattern suppresses any expansion of the unwanted variable. .It Ic .NOPATH Do not search for the target in the directories specified by .Ic .PATH . .It Ic .NOTMAIN Normally .Nm selects the first target it encounters as the default target to be built if no target was specified. This source prevents this target from being selected. .It Ic .OPTIONAL If a target is marked with this attribute and .Nm can't figure out how to create it, it will ignore this fact and assume the file isn't needed or already exists. .It Ic .PHONY The target does not correspond to an actual file; it is always considered to be out of date, and will not be created with the .Fl t option. Suffix-transformation rules are not applied to .Ic .PHONY targets. .It Ic .PRECIOUS When .Nm is interrupted, it normally removes any partially made targets. This source prevents the target from being removed. .It Ic .RECURSIVE Synonym for .Ic .MAKE . .It Ic .SILENT Do not echo any of the commands associated with this target, exactly as if they all were preceded by an at sign .Pq Ql @ . .It Ic .USE Turn the target into .Nm Ns 's version of a macro. When the target is used as a source for another target, the other target acquires the commands, sources, and attributes (except for .Ic .USE ) of the source. If the target already has commands, the .Ic .USE target's commands are appended to them. .It Ic .USEBEFORE Exactly like .Ic .USE , but prepend the .Ic .USEBEFORE target commands to the target. .It Ic .WAIT If .Ic .WAIT appears in a dependency line, the sources that precede it are made before the sources that succeed it in the line. Since the dependents of files are not made until the file itself could be made, this also stops the dependents being built unless they are needed for another branch of the dependency tree. So given: .Bd -literal x: a .WAIT b echo x a: echo a b: b1 echo b b1: echo b1 .Ed the output is always .Ql a , .Ql b1 , .Ql b , .Ql x . .br The ordering imposed by .Ic .WAIT is only relevant for parallel makes. .El .Sh SPECIAL TARGETS Special targets may not be included with other targets, i.e. they must be the only target specified. .Bl -tag -width .BEGINx .It Ic .BEGIN Any command lines attached to this target are executed before anything else is done. .It Ic .DEFAULT This is sort of a .Ic .USE rule for any target (that was used only as a source) that .Nm can't figure out any other way to create. Only the shell script is used. The .Ic .IMPSRC variable of a target that inherits .Ic .DEFAULT Ns 's commands is set to the target's own name. .It Ic .DELETE_ON_ERROR If this target is present in the makefile, it globally causes make to delete targets whose commands fail. (By default, only targets whose commands are interrupted during execution are deleted. This is the historical behavior.) This setting can be used to help prevent half-finished or malformed targets from being left around and corrupting future rebuilds. .It Ic .END Any command lines attached to this target are executed after everything else is done. .It Ic .ERROR Any command lines attached to this target are executed when another target fails. The .Ic .ERROR_TARGET variable is set to the target that failed. See also .Ic MAKE_PRINT_VAR_ON_ERROR . .It Ic .IGNORE Mark each of the sources with the .Ic .IGNORE attribute. If no sources are specified, this is the equivalent of specifying the .Fl i option. .It Ic .INTERRUPT If .Nm is interrupted, the commands for this target will be executed. .It Ic .MAIN If no target is specified when .Nm is invoked, this target will be built. .It Ic .MAKEFLAGS This target provides a way to specify flags for .Nm when the makefile is used. The flags are as if typed to the shell, though the .Fl f option will have no effect. .\" XXX: NOT YET!!!! .\" .It Ic .NOTPARALLEL .\" The named targets are executed in non parallel mode. .\" If no targets are .\" specified, then all targets are executed in non parallel mode. .It Ic .NOPATH Apply the .Ic .NOPATH attribute to any specified sources. .It Ic .NOTPARALLEL Disable parallel mode. .It Ic .NO_PARALLEL Synonym for .Ic .NOTPARALLEL , for compatibility with other pmake variants. .It Ic .OBJDIR The source is a new value for .Ql Va .OBJDIR . If it exists, .Nm will .Xr chdir 2 to it and update the value of .Ql Va .OBJDIR . .It Ic .ORDER The named targets are made in sequence. This ordering does not add targets to the list of targets to be made. Since the dependents of a target do not get built until the target itself could be built, unless .Ql a is built by another part of the dependency graph, the following is a dependency loop: .Bd -literal \&.ORDER: b a b: a .Ed .Pp The ordering imposed by .Ic .ORDER is only relevant for parallel makes. .\" XXX: NOT YET!!!! .\" .It Ic .PARALLEL .\" The named targets are executed in parallel mode. .\" If no targets are .\" specified, then all targets are executed in parallel mode. .It Ic .PATH The sources are directories which are to be searched for files not found in the current directory. If no sources are specified, any previously specified directories are deleted. If the source is the special .Ic .DOTLAST target, then the current working directory is searched last. .It Ic .PATH. Ns Va suffix Like .Ic .PATH but applies only to files with a particular suffix. The suffix must have been previously declared with .Ic .SUFFIXES . .It Ic .PHONY Apply the .Ic .PHONY attribute to any specified sources. .It Ic .PRECIOUS Apply the .Ic .PRECIOUS attribute to any specified sources. If no sources are specified, the .Ic .PRECIOUS attribute is applied to every target in the file. .It Ic .SHELL Sets the shell that .Nm will use to execute commands. The sources are a set of .Ar field=value pairs. .Bl -tag -width hasErrCtls .It Ar name This is the minimal specification, used to select one of the built-in shell specs; .Ar sh , .Ar ksh , and .Ar csh . .It Ar path Specifies the path to the shell. .It Ar hasErrCtl Indicates whether the shell supports exit on error. .It Ar check The command to turn on error checking. .It Ar ignore The command to disable error checking. .It Ar echo The command to turn on echoing of commands executed. .It Ar quiet The command to turn off echoing of commands executed. .It Ar filter The output to filter after issuing the .Ar quiet command. It is typically identical to .Ar quiet . .It Ar errFlag The flag to pass the shell to enable error checking. .It Ar echoFlag The flag to pass the shell to enable command echoing. .It Ar newline The string literal to pass the shell that results in a single newline character when used outside of any quoting characters. .El Example: .Bd -literal \&.SHELL: name=ksh path=/bin/ksh hasErrCtl=true \e check="set \-e" ignore="set +e" \e echo="set \-v" quiet="set +v" filter="set +v" \e echoFlag=v errFlag=e newline="'\en'" .Ed .It Ic .SILENT Apply the .Ic .SILENT attribute to any specified sources. If no sources are specified, the .Ic .SILENT attribute is applied to every command in the file. .It Ic .STALE This target gets run when a dependency file contains stale entries, having .Va .ALLSRC set to the name of that dependency file. .It Ic .SUFFIXES Each source specifies a suffix to .Nm . If no sources are specified, any previously specified suffixes are deleted. It allows the creation of suffix-transformation rules. .Pp Example: .Bd -literal \&.SUFFIXES: .o \&.c.o: cc \-o ${.TARGET} \-c ${.IMPSRC} .Ed .El .Sh ENVIRONMENT .Nm uses the following environment variables, if they exist: .Ev MACHINE , .Ev MACHINE_ARCH , .Ev MAKE , .Ev MAKEFLAGS , .Ev MAKEOBJDIR , .Ev MAKEOBJDIRPREFIX , .Ev MAKESYSPATH , .Ev PWD , and .Ev TMPDIR . .Pp .Ev MAKEOBJDIRPREFIX and .Ev MAKEOBJDIR may only be set in the environment or on the command line to .Nm and not as makefile variables; see the description of .Ql Va .OBJDIR for more details. .Sh FILES .Bl -tag -width /usr/share/mk -compact .It .depend list of dependencies .It Makefile list of dependencies .It makefile list of dependencies .It sys.mk system makefile .It /usr/share/mk system makefile directory .El .Sh COMPATIBILITY The basic make syntax is compatible between different versions of make; however the special variables, variable modifiers and conditionals are not. .Ss Older versions An incomplete list of changes in older versions of .Nm : .Pp The way that .for loop variables are substituted changed after .Nx 5.0 so that they still appear to be variable expansions. In particular this stops them being treated as syntax, and removes some obscure problems using them in .if statements. .Pp The way that parallel makes are scheduled changed in .Nx 4.0 so that .ORDER and .WAIT apply recursively to the dependent nodes. The algorithms used may change again in the future. .Ss Other make dialects Other make dialects (GNU make, SVR4 make, POSIX make, etc.) do not support most of the features of .Nm as described in this manual. Most notably: .Bl -bullet -offset indent .It The .Ic .WAIT and .Ic .ORDER declarations and most functionality pertaining to parallelization. (GNU make supports parallelization but lacks these features needed to control it effectively.) .It Directives, including for loops and conditionals and most of the forms of include files. (GNU make has its own incompatible and less powerful syntax for conditionals.) .It All built-in variables that begin with a dot. .It Most of the special sources and targets that begin with a dot, with the notable exception of .Ic .PHONY , .Ic .PRECIOUS , and .Ic .SUFFIXES . .It Variable modifiers, except for the .Dl :old=new string substitution, which does not portably support globbing with .Ql % and historically only works on declared suffixes. .It The .Ic $> variable even in its short form; most makes support this functionality but its name varies. .El .Pp Some features are somewhat more portable, such as assignment with .Ic += , .Ic ?= , and .Ic != . The .Ic .PATH functionality is based on an older feature .Ic VPATH found in GNU make and many versions of SVR4 make; however, historically its behavior is too ill-defined (and too buggy) to rely upon. .Pp The .Ic $@ and .Ic $< variables are more or less universally portable, as is the .Ic $(MAKE) variable. Basic use of suffix rules (for files only in the current directory, not trying to chain transformations together, etc.) is also reasonably portable. .Sh SEE ALSO .Xr mkdep 1 , .Xr style.Makefile 5 .Sh HISTORY A .Nm command appeared in .At v7 . This .Nm implementation is based on Adam De Boor's pmake program which was written for Sprite at Berkeley. It was designed to be a parallel distributed make running jobs on different machines using a daemon called .Dq customs . .Pp Historically the target/dependency .Dq FRC has been used to FoRCe rebuilding (since the target/dependency does not exist... unless someone creates an .Dq FRC file). .Sh BUGS The .Nm syntax is difficult to parse without actually acting on the data. For instance, finding the end of a variable's use should involve scanning each of the modifiers, using the correct terminator for each field. In many places .Nm just counts {} and () in order to find the end of a variable expansion. .Pp There is no way of escaping a space character in a filename. diff --git a/contrib/bmake/make.c b/contrib/bmake/make.c index a85a497be32d..2c1a243965f1 100644 --- a/contrib/bmake/make.c +++ b/contrib/bmake/make.c @@ -1,1440 +1,1488 @@ -/* $NetBSD: make.c,v 1.244 2021/04/04 10:05:08 rillig Exp $ */ +/* $NetBSD: make.c,v 1.248 2021/11/28 23:12:51 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Examination of targets and their suitability for creation. * * Interface: * Make_Run Initialize things for the module. Returns true if * work was (or would have been) done. * * Make_Update After a target is made, update all its parents. * Perform various bookkeeping chores like the updating * of the youngestChild field of the parent, filling * of the IMPSRC variable, etc. Place the parent on the * toBeMade queue if it should be. * * GNode_UpdateYoungestChild * Update the node's youngestChild field based on the * child's modification time. * * GNode_SetLocalVars * Set up the various local variables for a * target, including the .ALLSRC variable, making * sure that any variable that needs to exist * at the very least has the empty value. * * GNode_IsOODate Determine if a target is out-of-date. * * Make_HandleUse See if a child is a .USE node for a parent * and perform the .USE actions if so. * * Make_ExpandUse Expand .USE nodes */ #include "make.h" #include "dir.h" #include "job.h" /* "@(#)make.c 8.1 (Berkeley) 6/6/93" */ -MAKE_RCSID("$NetBSD: make.c,v 1.244 2021/04/04 10:05:08 rillig Exp $"); +MAKE_RCSID("$NetBSD: make.c,v 1.248 2021/11/28 23:12:51 rillig Exp $"); /* Sequence # to detect recursion. */ static unsigned int checked_seqno = 1; /* * The current fringe of the graph. * These are nodes which await examination by MakeOODate. * It is added to by Make_Update and subtracted from by MakeStartJobs */ static GNodeList toBeMade = LST_INIT; void debug_printf(const char *fmt, ...) { va_list args; va_start(args, fmt); vfprintf(opts.debug_file, fmt, args); va_end(args); } MAKE_ATTR_DEAD static void make_abort(GNode *gn, int lineno) { debug_printf("make_abort from line %d\n", lineno); Targ_PrintNode(gn, 2); Targ_PrintNodes(&toBeMade, 2); Targ_PrintGraph(3); abort(); } -ENUM_FLAGS_RTTI_31(GNodeType, - OP_DEPENDS, OP_FORCE, OP_DOUBLEDEP, -/* OP_OPMASK is omitted since it combines other flags */ - OP_OPTIONAL, OP_USE, OP_EXEC, OP_IGNORE, - OP_PRECIOUS, OP_SILENT, OP_MAKE, OP_JOIN, - OP_MADE, OP_SPECIAL, OP_USEBEFORE, OP_INVISIBLE, - OP_NOTMAIN, OP_PHONY, OP_NOPATH, OP_WAIT, - OP_NOMETA, OP_META, OP_NOMETA_CMP, OP_SUBMAKE, - OP_TRANSFORM, OP_MEMBER, OP_LIB, OP_ARCHV, - OP_HAS_COMMANDS, OP_SAVE_CMDS, OP_DEPS_FOUND, OP_MARK); - -ENUM_FLAGS_RTTI_9(GNodeFlags, - REMAKE, CHILDMADE, FORCE, DONE_WAIT, - DONE_ORDER, FROM_DEPEND, DONE_ALLSRC, CYCLE, - DONECYCLE); +static const char * +GNodeType_ToString(GNodeType type, void **freeIt) +{ + Buffer buf; + + Buf_InitSize(&buf, 32); +#define ADD(flag) Buf_AddFlag(&buf, (type & (flag)) != OP_NONE, #flag) + ADD(OP_DEPENDS); + ADD(OP_FORCE); + ADD(OP_DOUBLEDEP); + ADD(OP_OPTIONAL); + ADD(OP_USE); + ADD(OP_EXEC); + ADD(OP_IGNORE); + ADD(OP_PRECIOUS); + ADD(OP_SILENT); + ADD(OP_MAKE); + ADD(OP_JOIN); + ADD(OP_MADE); + ADD(OP_SPECIAL); + ADD(OP_USEBEFORE); + ADD(OP_INVISIBLE); + ADD(OP_NOTMAIN); + ADD(OP_PHONY); + ADD(OP_NOPATH); + ADD(OP_WAIT); + ADD(OP_NOMETA); + ADD(OP_META); + ADD(OP_NOMETA_CMP); + ADD(OP_SUBMAKE); + ADD(OP_TRANSFORM); + ADD(OP_MEMBER); + ADD(OP_LIB); + ADD(OP_ARCHV); + ADD(OP_HAS_COMMANDS); + ADD(OP_SAVE_CMDS); + ADD(OP_DEPS_FOUND); + ADD(OP_MARK); +#undef ADD + return buf.len == 0 ? "none" : (*freeIt = Buf_DoneData(&buf)); +} + +static const char * +GNodeFlags_ToString(GNodeFlags flags, void **freeIt) +{ + Buffer buf; + + Buf_InitSize(&buf, 32); +#define ADD(flag, name) Buf_AddFlag(&buf, flags.flag, name) + ADD(remake, "REMAKE"); + ADD(childMade, "CHILDMADE"); + ADD(force, "FORCE"); + ADD(doneWait, "DONE_WAIT"); + ADD(doneOrder, "DONE_ORDER"); + ADD(fromDepend, "FROM_DEPEND"); + ADD(doneAllsrc, "DONE_ALLSRC"); + ADD(cycle, "CYCLE"); + ADD(doneCycle, "DONECYCLE"); +#undef ADD + return buf.len == 0 ? "none" : (*freeIt = Buf_DoneData(&buf)); +} void GNode_FprintDetails(FILE *f, const char *prefix, const GNode *gn, const char *suffix) { - char type_buf[GNodeType_ToStringSize]; - char flags_buf[GNodeFlags_ToStringSize]; + void *type_freeIt = NULL; + void *flags_freeIt = NULL; fprintf(f, "%s%s, type %s, flags %s%s", prefix, GNodeMade_Name(gn->made), - GNodeType_ToString(type_buf, gn->type), - GNodeFlags_ToString(flags_buf, gn->flags), + GNodeType_ToString(gn->type, &type_freeIt), + GNodeFlags_ToString(gn->flags, &flags_freeIt), suffix); + free(type_freeIt); + free(flags_freeIt); } bool GNode_ShouldExecute(GNode *gn) { return !((gn->type & OP_MAKE) ? opts.noRecursiveExecute : opts.noExecute); } /* Update the youngest child of the node, according to the given child. */ void GNode_UpdateYoungestChild(GNode *gn, GNode *cgn) { if (gn->youngestChild == NULL || cgn->mtime > gn->youngestChild->mtime) gn->youngestChild = cgn; } static bool IsOODateRegular(GNode *gn) { /* These rules are inherited from the original Make. */ if (gn->youngestChild != NULL) { if (gn->mtime < gn->youngestChild->mtime) { DEBUG1(MAKE, "modified before source \"%s\"...", GNode_Path(gn->youngestChild)); return true; } return false; } if (gn->mtime == 0 && !(gn->type & OP_OPTIONAL)) { DEBUG0(MAKE, "nonexistent and no sources..."); return true; } if (gn->type & OP_DOUBLEDEP) { DEBUG0(MAKE, ":: operator and no sources..."); return true; } return false; } /* * See if the node is out of date with respect to its sources. * * Used by Make_Run when deciding which nodes to place on the * toBeMade queue initially and by Make_Update to screen out .USE and * .EXEC nodes. In the latter case, however, any other sort of node * must be considered out-of-date since at least one of its children * will have been recreated. * * The mtime field of the node and the youngestChild field of its parents * may be changed. */ bool GNode_IsOODate(GNode *gn) { bool oodate; /* * Certain types of targets needn't even be sought as their datedness * doesn't depend on their modification time... */ if (!(gn->type & (OP_JOIN | OP_USE | OP_USEBEFORE | OP_EXEC))) { Dir_UpdateMTime(gn, true); if (DEBUG(MAKE)) { if (gn->mtime != 0) debug_printf("modified %s...", Targ_FmtTime(gn->mtime)); else debug_printf("nonexistent..."); } } /* * A target is remade in one of the following circumstances: * * its modification time is smaller than that of its youngest * child and it would actually be run (has commands or is not * GNode_IsTarget) * * it's the object of a force operator * * it has no children, was on the lhs of an operator and doesn't * exist already. * * Libraries are only considered out-of-date if the archive module * says they are. * * These weird rules are brought to you by Backward-Compatibility * and the strange people who wrote 'Make'. */ if (gn->type & (OP_USE | OP_USEBEFORE)) { /* * If the node is a USE node it is *never* out of date * no matter *what*. */ DEBUG0(MAKE, ".USE node..."); oodate = false; } else if ((gn->type & OP_LIB) && (gn->mtime == 0 || Arch_IsLib(gn))) { DEBUG0(MAKE, "library..."); /* * always out of date if no children and :: target * or nonexistent. */ oodate = (gn->mtime == 0 || Arch_LibOODate(gn) || (gn->youngestChild == NULL && (gn->type & OP_DOUBLEDEP))); } else if (gn->type & OP_JOIN) { /* * A target with the .JOIN attribute is only considered * out-of-date if any of its children was out-of-date. */ DEBUG0(MAKE, ".JOIN node..."); DEBUG1(MAKE, "source %smade...", - gn->flags & CHILDMADE ? "" : "not "); - oodate = (gn->flags & CHILDMADE) != 0; + gn->flags.childMade ? "" : "not "); + oodate = gn->flags.childMade; } else if (gn->type & (OP_FORCE | OP_EXEC | OP_PHONY)) { /* * A node which is the object of the force (!) operator or * which has the .EXEC attribute is always considered * out-of-date. */ if (DEBUG(MAKE)) { if (gn->type & OP_FORCE) { debug_printf("! operator..."); } else if (gn->type & OP_PHONY) { debug_printf(".PHONY node..."); } else { debug_printf(".EXEC node..."); } } oodate = true; } else if (IsOODateRegular(gn)) { oodate = true; } else { /* * When a nonexistent child with no sources * (such as a typically used FORCE source) has been made and * the target of the child (usually a directory) has the same * timestamp as the timestamp just given to the nonexistent * child after it was considered made. */ if (DEBUG(MAKE)) { - if (gn->flags & FORCE) + if (gn->flags.force) debug_printf("non existing child..."); } - oodate = (gn->flags & FORCE) != 0; + oodate = gn->flags.force; } #ifdef USE_META if (useMeta) { oodate = meta_oodate(gn, oodate); } #endif /* * If the target isn't out-of-date, the parents need to know its * modification time. Note that targets that appear to be out-of-date * but aren't, because they have no commands and are GNode_IsTarget, * have their mtime stay below their children's mtime to keep parents * from thinking they're out-of-date. */ if (!oodate) { GNodeListNode *ln; for (ln = gn->parents.first; ln != NULL; ln = ln->next) GNode_UpdateYoungestChild(ln->datum, gn); } return oodate; } static void PretendAllChildrenAreMade(GNode *pgn) { GNodeListNode *ln; for (ln = pgn->children.first; ln != NULL; ln = ln->next) { GNode *cgn = ln->datum; /* This may also update cgn->path. */ Dir_UpdateMTime(cgn, false); GNode_UpdateYoungestChild(pgn, cgn); pgn->unmade--; } } /* * Called by Make_Run and SuffApplyTransform on the downward pass to handle * .USE and transformation nodes, by copying the child node's commands, type * flags and children to the parent node. * * A .USE node is much like an explicit transformation rule, except its * commands are always added to the target node, even if the target already * has commands. * * Input: * cgn The source node, which is either a .USE/.USEBEFORE * node or a transformation node (OP_TRANSFORM). * pgn The target node */ void Make_HandleUse(GNode *cgn, GNode *pgn) { GNodeListNode *ln; /* An element in the children list */ #ifdef DEBUG_SRC if (!(cgn->type & (OP_USE | OP_USEBEFORE | OP_TRANSFORM))) { debug_printf("Make_HandleUse: called for plain node %s\n", cgn->name); /* XXX: debug mode should not affect control flow */ return; } #endif if ((cgn->type & (OP_USE | OP_USEBEFORE)) || Lst_IsEmpty(&pgn->commands)) { if (cgn->type & OP_USEBEFORE) { /* .USEBEFORE */ Lst_PrependAll(&pgn->commands, &cgn->commands); } else { /* .USE, or target has no commands */ Lst_AppendAll(&pgn->commands, &cgn->commands); } } for (ln = cgn->children.first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; /* * Expand variables in the .USE node's name * and save the unexpanded form. * We don't need to do this for commands. * They get expanded properly when we execute. */ if (gn->uname == NULL) { gn->uname = gn->name; } else { free(gn->name); } (void)Var_Subst(gn->uname, pgn, VARE_WANTRES, &gn->name); /* TODO: handle errors */ if (gn->uname != NULL && strcmp(gn->name, gn->uname) != 0) { /* See if we have a target for this node. */ GNode *tgn = Targ_FindNode(gn->name); if (tgn != NULL) gn = tgn; } Lst_Append(&pgn->children, gn); Lst_Append(&gn->parents, pgn); pgn->unmade++; } pgn->type |= cgn->type & ~(OP_OPMASK | OP_USE | OP_USEBEFORE | OP_TRANSFORM); } /* * Used by Make_Run on the downward pass to handle .USE nodes. Should be * called before the children are enqueued to be looked at by MakeAddChild. * * For a .USE child, the commands, type flags and children are copied to the * parent node, and since the relation to the .USE node is then no longer * needed, that relation is removed. * * Input: * cgn the child, which may be a .USE node * pgn the current parent */ static void MakeHandleUse(GNode *cgn, GNode *pgn, GNodeListNode *ln) { bool unmarked; unmarked = !(cgn->type & OP_MARK); cgn->type |= OP_MARK; if (!(cgn->type & (OP_USE | OP_USEBEFORE))) return; if (unmarked) Make_HandleUse(cgn, pgn); /* * This child node is now "made", so we decrement the count of * unmade children in the parent... We also remove the child * from the parent's list to accurately reflect the number of decent * children the parent has. This is used by Make_Run to decide * whether to queue the parent or examine its children... */ Lst_Remove(&pgn->children, ln); pgn->unmade--; } static void HandleUseNodes(GNode *gn) { GNodeListNode *ln, *nln; for (ln = gn->children.first; ln != NULL; ln = nln) { nln = ln->next; MakeHandleUse(ln->datum, gn, ln); } } /* * Check the modification time of a gnode, and update it if necessary. * Return 0 if the gnode does not exist, or its filesystem time if it does. */ time_t Make_Recheck(GNode *gn) { time_t mtime; Dir_UpdateMTime(gn, true); mtime = gn->mtime; #ifndef RECHECK /* * We can't re-stat the thing, but we can at least take care of rules * where a target depends on a source that actually creates the * target, but only if it has changed, e.g. * * parse.h : parse.o * * parse.o : parse.y * yacc -d parse.y * cc -c y.tab.c * mv y.tab.o parse.o * cmp -s y.tab.h parse.h || mv y.tab.h parse.h * * In this case, if the definitions produced by yacc haven't changed * from before, parse.h won't have been updated and gn->mtime will * reflect the current modification time for parse.h. This is * something of a kludge, I admit, but it's a useful one. * * XXX: People like to use a rule like "FRC:" to force things that * depend on FRC to be made, so we have to check for gn->children * being empty as well. */ if (!Lst_IsEmpty(gn->commands) || Lst_IsEmpty(gn->children)) { gn->mtime = now; } #else /* * This is what Make does and it's actually a good thing, as it * allows rules like * * cmp -s y.tab.h parse.h || cp y.tab.h parse.h * * to function as intended. Unfortunately, thanks to the stateless * nature of NFS (by which I mean the loose coupling of two clients * using the same file from a common server), there are times when * the modification time of a file created on a remote machine * will not be modified before the local stat() implied by the * Dir_UpdateMTime occurs, thus leading us to believe that the file * is unchanged, wreaking havoc with files that depend on this one. * * I have decided it is better to make too much than to make too * little, so this stuff is commented out unless you're sure it's ok. * -- ardeb 1/12/88 */ /* * Christos, 4/9/92: If we are saving commands, pretend that * the target is made now. Otherwise archives with '...' rules * don't work! */ if (!GNode_ShouldExecute(gn) || (gn->type & OP_SAVE_CMDS) || (mtime == 0 && !(gn->type & OP_WAIT))) { DEBUG2(MAKE, " recheck(%s): update time from %s to now\n", gn->name, gn->mtime == 0 ? "nonexistent" : Targ_FmtTime(gn->mtime)); gn->mtime = now; } else { DEBUG2(MAKE, " recheck(%s): current update time: %s\n", gn->name, Targ_FmtTime(gn->mtime)); } #endif /* XXX: The returned mtime may differ from gn->mtime. * Intentionally? */ return mtime; } /* * Set the .PREFIX and .IMPSRC variables for all the implied parents * of this node. */ static void UpdateImplicitParentsVars(GNode *cgn, const char *cname) { GNodeListNode *ln; const char *cpref = GNode_VarPrefix(cgn); for (ln = cgn->implicitParents.first; ln != NULL; ln = ln->next) { GNode *pgn = ln->datum; - if (pgn->flags & REMAKE) { + if (pgn->flags.remake) { Var_Set(pgn, IMPSRC, cname); if (cpref != NULL) Var_Set(pgn, PREFIX, cpref); } } } /* See if a .ORDER rule stops us from building this node. */ static bool IsWaitingForOrder(GNode *gn) { GNodeListNode *ln; for (ln = gn->order_pred.first; ln != NULL; ln = ln->next) { GNode *ogn = ln->datum; - if (GNode_IsDone(ogn) || !(ogn->flags & REMAKE)) + if (GNode_IsDone(ogn) || !ogn->flags.remake) continue; DEBUG2(MAKE, "IsWaitingForOrder: Waiting for .ORDER node \"%s%s\"\n", ogn->name, ogn->cohort_num); return true; } return false; } static void MakeBuildParent(GNode *, GNodeListNode *); static void ScheduleOrderSuccessors(GNode *gn) { GNodeListNode *toBeMadeNext = toBeMade.first; GNodeListNode *ln; for (ln = gn->order_succ.first; ln != NULL; ln = ln->next) MakeBuildParent(ln->datum, toBeMadeNext); } /* * Perform update on the parents of a node. Used by JobFinish once * a node has been dealt with and by MakeStartJobs if it finds an * up-to-date node. * * The unmade field of pgn is decremented and pgn may be placed on * the toBeMade queue if this field becomes 0. * * If the child was made, the parent's flag CHILDMADE field will be * set true. * * If the child is not up-to-date and still does not exist, * set the FORCE flag on the parents. * * If the child wasn't made, the youngestChild field of the parent will be * altered if the child's mtime is big enough. * * Finally, if the child is the implied source for the parent, the * parent's IMPSRC variable is set appropriately. */ void Make_Update(GNode *cgn) { const char *cname; /* the child's name */ time_t mtime = -1; GNodeList *parents; GNodeListNode *ln; GNode *centurion; /* It is save to re-examine any nodes again */ checked_seqno++; cname = GNode_VarTarget(cgn); DEBUG2(MAKE, "Make_Update: %s%s\n", cgn->name, cgn->cohort_num); /* * If the child was actually made, see what its modification time is * now -- some rules won't actually update the file. If the file * still doesn't exist, make its mtime now. */ if (cgn->made != UPTODATE) { mtime = Make_Recheck(cgn); } /* * If this is a `::' node, we must consult its first instance * which is where all parents are linked. */ if ((centurion = cgn->centurion) != NULL) { if (!Lst_IsEmpty(&cgn->parents)) Punt("%s%s: cohort has parents", cgn->name, cgn->cohort_num); centurion->unmade_cohorts--; if (centurion->unmade_cohorts < 0) Error("Graph cycles through centurion %s", centurion->name); } else { centurion = cgn; } parents = ¢urion->parents; /* If this was a .ORDER node, schedule the RHS */ ScheduleOrderSuccessors(centurion); /* Now mark all the parents as having one less unmade child */ for (ln = parents->first; ln != NULL; ln = ln->next) { GNode *pgn = ln->datum; if (DEBUG(MAKE)) { debug_printf("inspect parent %s%s: ", pgn->name, pgn->cohort_num); GNode_FprintDetails(opts.debug_file, "", pgn, ""); debug_printf(", unmade %d ", pgn->unmade - 1); } - if (!(pgn->flags & REMAKE)) { + if (!pgn->flags.remake) { /* This parent isn't needed */ DEBUG0(MAKE, "- not needed\n"); continue; } if (mtime == 0 && !(cgn->type & OP_WAIT)) - pgn->flags |= FORCE; + pgn->flags.force = true; /* * If the parent has the .MADE attribute, its timestamp got * updated to that of its newest child, and its unmade * child count got set to zero in Make_ExpandUse(). * However other things might cause us to build one of its * children - and so we mustn't do any processing here when * the child build finishes. */ if (pgn->type & OP_MADE) { DEBUG0(MAKE, "- .MADE\n"); continue; } if (!(cgn->type & (OP_EXEC | OP_USE | OP_USEBEFORE))) { if (cgn->made == MADE) - pgn->flags |= CHILDMADE; + pgn->flags.childMade = true; GNode_UpdateYoungestChild(pgn, cgn); } /* * A parent must wait for the completion of all instances * of a `::' dependency. */ if (centurion->unmade_cohorts != 0 || !GNode_IsDone(centurion)) { DEBUG2(MAKE, "- centurion made %d, %d unmade cohorts\n", centurion->made, centurion->unmade_cohorts); continue; } /* One more child of this parent is now made */ pgn->unmade--; if (pgn->unmade < 0) { if (DEBUG(MAKE)) { debug_printf("Graph cycles through %s%s\n", pgn->name, pgn->cohort_num); Targ_PrintGraph(2); } Error("Graph cycles through %s%s", pgn->name, pgn->cohort_num); } /* * We must always rescan the parents of .WAIT and .ORDER * nodes. */ if (pgn->unmade != 0 && !(centurion->type & OP_WAIT) - && !(centurion->flags & DONE_ORDER)) { + && !centurion->flags.doneOrder) { DEBUG0(MAKE, "- unmade children\n"); continue; } if (pgn->made != DEFERRED) { /* * Either this parent is on a different branch of * the tree, or it on the RHS of a .WAIT directive * or it is already on the toBeMade list. */ DEBUG0(MAKE, "- not deferred\n"); continue; } if (IsWaitingForOrder(pgn)) continue; if (DEBUG(MAKE)) { debug_printf("- %s%s made, schedule %s%s (made %d)\n", cgn->name, cgn->cohort_num, pgn->name, pgn->cohort_num, pgn->made); Targ_PrintNode(pgn, 2); } /* Ok, we can schedule the parent again */ pgn->made = REQUESTED; Lst_Enqueue(&toBeMade, pgn); } UpdateImplicitParentsVars(cgn, cname); } static void UnmarkChildren(GNode *gn) { GNodeListNode *ln; for (ln = gn->children.first; ln != NULL; ln = ln->next) { GNode *child = ln->datum; child->type &= ~OP_MARK; } } /* * Add a child's name to the ALLSRC and OODATE variables of the given * node, but only if it has not been given the .EXEC, .USE or .INVISIBLE * attributes. .EXEC and .USE children are very rarely going to be files, * so... * * If the child is a .JOIN node, its ALLSRC is propagated to the parent. * * A child is added to the OODATE variable if its modification time is * later than that of its parent, as defined by Make, except if the * parent is a .JOIN node. In that case, it is only added to the OODATE * variable if it was actually made (since .JOIN nodes don't have * modification times, the comparison is rather unfair...).. * * Input: * cgn The child to add * pgn The parent to whose ALLSRC variable it should * be added */ static void MakeAddAllSrc(GNode *cgn, GNode *pgn) { const char *child, *allsrc; if (cgn->type & OP_MARK) return; cgn->type |= OP_MARK; if (cgn->type & (OP_EXEC | OP_USE | OP_USEBEFORE | OP_INVISIBLE)) return; if (cgn->type & OP_ARCHV) child = GNode_VarMember(cgn); else child = GNode_Path(cgn); if (cgn->type & OP_JOIN) allsrc = GNode_VarAllsrc(cgn); else allsrc = child; if (allsrc != NULL) Var_Append(pgn, ALLSRC, allsrc); if (pgn->type & OP_JOIN) { if (cgn->made == MADE) Var_Append(pgn, OODATE, child); } else if ((pgn->mtime < cgn->mtime) || (cgn->mtime >= now && cgn->made == MADE)) { /* * It goes in the OODATE variable if the parent is * younger than the child or if the child has been * modified more recently than the start of the make. * This is to keep pmake from getting confused if * something else updates the parent after the make * starts (shouldn't happen, I know, but sometimes it * does). In such a case, if we've updated the child, * the parent is likely to have a modification time * later than that of the child and anything that * relies on the OODATE variable will be hosed. * * XXX: This will cause all made children to go in * the OODATE variable, even if they're not touched, * if RECHECK isn't defined, since cgn->mtime is set * to now in Make_Update. According to some people, * this is good... */ Var_Append(pgn, OODATE, child); } } /* * Set up the ALLSRC and OODATE variables. Sad to say, it must be * done separately, rather than while traversing the graph. This is * because Make defined OODATE to contain all sources whose modification * times were later than that of the target, *not* those sources that * were out-of-date. Since in both compatibility and native modes, * the modification time of the parent isn't found until the child * has been dealt with, we have to wait until now to fill in the * variable. As for ALLSRC, the ordering is important and not * guaranteed when in native mode, so it must be set here, too. * * If the node is a .JOIN node, its TARGET variable will be set to * match its ALLSRC variable. */ void GNode_SetLocalVars(GNode *gn) { GNodeListNode *ln; - if (gn->flags & DONE_ALLSRC) + if (gn->flags.doneAllsrc) return; UnmarkChildren(gn); for (ln = gn->children.first; ln != NULL; ln = ln->next) MakeAddAllSrc(ln->datum, gn); if (!Var_Exists(gn, OODATE)) Var_Set(gn, OODATE, ""); if (!Var_Exists(gn, ALLSRC)) Var_Set(gn, ALLSRC, ""); if (gn->type & OP_JOIN) Var_Set(gn, TARGET, GNode_VarAllsrc(gn)); - gn->flags |= DONE_ALLSRC; + gn->flags.doneAllsrc = true; } static bool MakeBuildChild(GNode *cn, GNodeListNode *toBeMadeNext) { if (DEBUG(MAKE)) { debug_printf("MakeBuildChild: inspect %s%s, ", cn->name, cn->cohort_num); GNode_FprintDetails(opts.debug_file, "", cn, "\n"); } if (GNode_IsReady(cn)) return false; /* If this node is on the RHS of a .ORDER, check LHSs. */ if (IsWaitingForOrder(cn)) { /* Can't build this (or anything else in this child list) yet */ cn->made = DEFERRED; return false; /* but keep looking */ } DEBUG2(MAKE, "MakeBuildChild: schedule %s%s\n", cn->name, cn->cohort_num); cn->made = REQUESTED; if (toBeMadeNext == NULL) Lst_Append(&toBeMade, cn); else Lst_InsertBefore(&toBeMade, toBeMadeNext, cn); if (cn->unmade_cohorts != 0) { ListNode *ln; for (ln = cn->cohorts.first; ln != NULL; ln = ln->next) if (MakeBuildChild(ln->datum, toBeMadeNext)) break; } /* * If this node is a .WAIT node with unmade children * then don't add the next sibling. */ return cn->type & OP_WAIT && cn->unmade > 0; } /* When a .ORDER LHS node completes, we do this on each RHS. */ static void MakeBuildParent(GNode *pn, GNodeListNode *toBeMadeNext) { if (pn->made != DEFERRED) return; if (!MakeBuildChild(pn, toBeMadeNext)) { /* When this node is built, reschedule its parents. */ - pn->flags |= DONE_ORDER; + pn->flags.doneOrder = true; } } static void MakeChildren(GNode *gn) { GNodeListNode *toBeMadeNext = toBeMade.first; GNodeListNode *ln; for (ln = gn->children.first; ln != NULL; ln = ln->next) if (MakeBuildChild(ln->datum, toBeMadeNext)) break; } /* * Start as many jobs as possible, taking them from the toBeMade queue. * * If the -q option was given, no job will be started, * but as soon as an out-of-date target is found, this function * returns true. In all other cases, this function returns false. */ static bool MakeStartJobs(void) { GNode *gn; bool have_token = false; while (!Lst_IsEmpty(&toBeMade)) { /* * Get token now to avoid cycling job-list when we only * have 1 token */ if (!have_token && !Job_TokenWithdraw()) break; have_token = true; gn = Lst_Dequeue(&toBeMade); DEBUG2(MAKE, "Examining %s%s...\n", gn->name, gn->cohort_num); if (gn->made != REQUESTED) { /* * XXX: Replace %d with string representation; * see made_name. */ DEBUG1(MAKE, "state %d\n", gn->made); make_abort(gn, __LINE__); } if (gn->checked_seqno == checked_seqno) { /* * We've already looked at this node since a job * finished... */ DEBUG2(MAKE, "already checked %s%s\n", gn->name, gn->cohort_num); gn->made = DEFERRED; continue; } gn->checked_seqno = checked_seqno; if (gn->unmade != 0) { /* * We can't build this yet, add all unmade children * to toBeMade, just before the current first element. */ gn->made = DEFERRED; MakeChildren(gn); /* and drop this node on the floor */ DEBUG2(MAKE, "dropped %s%s\n", gn->name, gn->cohort_num); continue; } gn->made = BEINGMADE; if (GNode_IsOODate(gn)) { DEBUG0(MAKE, "out-of-date\n"); if (opts.queryFlag) return true; GNode_SetLocalVars(gn); Job_Make(gn); have_token = false; } else { DEBUG0(MAKE, "up-to-date\n"); gn->made = UPTODATE; if (gn->type & OP_JOIN) { /* * Even for an up-to-date .JOIN node, we * need it to have its local variables so * references to it get the correct value * for .TARGET when building up the local * variables of its parent(s)... */ GNode_SetLocalVars(gn); } Make_Update(gn); } } if (have_token) Job_TokenReturn(); return false; } /* Print the status of a .ORDER node. */ static void MakePrintStatusOrderNode(GNode *ogn, GNode *gn) { if (!GNode_IsWaitingFor(ogn)) return; printf(" `%s%s' has .ORDER dependency against %s%s ", gn->name, gn->cohort_num, ogn->name, ogn->cohort_num); GNode_FprintDetails(stdout, "(", ogn, ")\n"); if (DEBUG(MAKE) && opts.debug_file != stdout) { debug_printf(" `%s%s' has .ORDER dependency against %s%s ", gn->name, gn->cohort_num, ogn->name, ogn->cohort_num); GNode_FprintDetails(opts.debug_file, "(", ogn, ")\n"); } } static void MakePrintStatusOrder(GNode *gn) { GNodeListNode *ln; for (ln = gn->order_pred.first; ln != NULL; ln = ln->next) MakePrintStatusOrderNode(ln->datum, gn); } static void MakePrintStatusList(GNodeList *, int *); /* * Print the status of a top-level node, viz. it being up-to-date already * or not created due to an error in a lower level. */ static bool MakePrintStatus(GNode *gn, int *errors) { - if (gn->flags & DONECYCLE) { + if (gn->flags.doneCycle) { /* * We've completely processed this node before, don't do * it again. */ return false; } if (gn->unmade == 0) { - gn->flags |= DONECYCLE; + gn->flags.doneCycle = true; switch (gn->made) { case UPTODATE: printf("`%s%s' is up to date.\n", gn->name, gn->cohort_num); break; case MADE: break; case UNMADE: case DEFERRED: case REQUESTED: case BEINGMADE: (*errors)++; printf("`%s%s' was not built", gn->name, gn->cohort_num); GNode_FprintDetails(stdout, " (", gn, ")!\n"); if (DEBUG(MAKE) && opts.debug_file != stdout) { debug_printf("`%s%s' was not built", gn->name, gn->cohort_num); GNode_FprintDetails(opts.debug_file, " (", gn, ")!\n"); } /* Most likely problem is actually caused by .ORDER */ MakePrintStatusOrder(gn); break; default: /* Errors - already counted */ printf("`%s%s' not remade because of errors.\n", gn->name, gn->cohort_num); if (DEBUG(MAKE) && opts.debug_file != stdout) debug_printf( "`%s%s' not remade because of errors.\n", gn->name, gn->cohort_num); break; } return false; } DEBUG3(MAKE, "MakePrintStatus: %s%s has %d unmade children\n", gn->name, gn->cohort_num, gn->unmade); /* * If printing cycles and came to one that has unmade children, * print out the cycle by recursing on its children. */ - if (!(gn->flags & CYCLE)) { + if (!gn->flags.cycle) { /* First time we've seen this node, check all children */ - gn->flags |= CYCLE; + gn->flags.cycle = true; MakePrintStatusList(&gn->children, errors); /* Mark that this node needn't be processed again */ - gn->flags |= DONECYCLE; + gn->flags.doneCycle = true; return false; } /* Only output the error once per node */ - gn->flags |= DONECYCLE; + gn->flags.doneCycle = true; Error("Graph cycles through `%s%s'", gn->name, gn->cohort_num); if ((*errors)++ > 100) /* Abandon the whole error report */ return true; /* Reporting for our children will give the rest of the loop */ MakePrintStatusList(&gn->children, errors); return false; } static void MakePrintStatusList(GNodeList *gnodes, int *errors) { GNodeListNode *ln; for (ln = gnodes->first; ln != NULL; ln = ln->next) if (MakePrintStatus(ln->datum, errors)) break; } static void ExamineLater(GNodeList *examine, GNodeList *toBeExamined) { ListNode *ln; for (ln = toBeExamined->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; - if (gn->flags & REMAKE) + if (gn->flags.remake) continue; if (gn->type & (OP_USE | OP_USEBEFORE)) continue; DEBUG2(MAKE, "ExamineLater: need to examine \"%s%s\"\n", gn->name, gn->cohort_num); Lst_Enqueue(examine, gn); } } /* * Expand .USE nodes and create a new targets list. * * Input: * targs the initial list of targets */ void Make_ExpandUse(GNodeList *targs) { GNodeList examine = LST_INIT; /* Queue of targets to examine */ Lst_AppendAll(&examine, targs); /* * Make an initial downward pass over the graph, marking nodes to * be made as we go down. * * We call Suff_FindDeps to find where a node is and to get some * children for it if it has none and also has no commands. If the * node is a leaf, we stick it on the toBeMade queue to be looked * at in a minute, otherwise we add its children to our queue and * go on about our business. */ while (!Lst_IsEmpty(&examine)) { GNode *gn = Lst_Dequeue(&examine); - if (gn->flags & REMAKE) + if (gn->flags.remake) /* We've looked at this one already */ continue; - gn->flags |= REMAKE; + gn->flags.remake = true; DEBUG2(MAKE, "Make_ExpandUse: examine %s%s\n", gn->name, gn->cohort_num); if (gn->type & OP_DOUBLEDEP) Lst_PrependAll(&examine, &gn->cohorts); /* * Apply any .USE rules before looking for implicit * dependencies to make sure everything has commands that * should. * * Make sure that the TARGET is set, so that we can make * expansions. */ if (gn->type & OP_ARCHV) { char *eoa = strchr(gn->name, '('); char *eon = strchr(gn->name, ')'); if (eoa == NULL || eon == NULL) continue; *eoa = '\0'; *eon = '\0'; Var_Set(gn, MEMBER, eoa + 1); Var_Set(gn, ARCHIVE, gn->name); *eoa = '('; *eon = ')'; } Dir_UpdateMTime(gn, false); Var_Set(gn, TARGET, GNode_Path(gn)); UnmarkChildren(gn); HandleUseNodes(gn); if (!(gn->type & OP_MADE)) Suff_FindDeps(gn); else { PretendAllChildrenAreMade(gn); if (gn->unmade != 0) { printf( "Warning: " "%s%s still has %d unmade children\n", gn->name, gn->cohort_num, gn->unmade); } } if (gn->unmade != 0) ExamineLater(&examine, &gn->children); } Lst_Done(&examine); } /* Make the .WAIT node depend on the previous children */ static void add_wait_dependency(GNodeListNode *owln, GNode *wn) { GNodeListNode *cln; GNode *cn; for (cln = owln; (cn = cln->datum) != wn; cln = cln->next) { DEBUG3(MAKE, ".WAIT: add dependency %s%s -> %s\n", cn->name, cn->cohort_num, wn->name); /* XXX: This pattern should be factored out, it repeats often */ Lst_Append(&wn->children, cn); wn->unmade++; Lst_Append(&cn->parents, wn); } } /* Convert .WAIT nodes into dependencies. */ static void Make_ProcessWait(GNodeList *targs) { GNode *pgn; /* 'parent' node we are examining */ GNodeListNode *owln; /* Previous .WAIT node */ GNodeList examine; /* List of targets to examine */ /* * We need all the nodes to have a common parent in order for the * .WAIT and .ORDER scheduling to work. * Perhaps this should be done earlier... */ pgn = GNode_New(".MAIN"); - pgn->flags = REMAKE; + pgn->flags.remake = true; pgn->type = OP_PHONY | OP_DEPENDS; /* Get it displayed in the diag dumps */ Lst_Prepend(Targ_List(), pgn); { GNodeListNode *ln; for (ln = targs->first; ln != NULL; ln = ln->next) { GNode *cgn = ln->datum; Lst_Append(&pgn->children, cgn); Lst_Append(&cgn->parents, pgn); pgn->unmade++; } } /* Start building with the 'dummy' .MAIN' node */ MakeBuildChild(pgn, NULL); Lst_Init(&examine); Lst_Append(&examine, pgn); while (!Lst_IsEmpty(&examine)) { GNodeListNode *ln; pgn = Lst_Dequeue(&examine); /* We only want to process each child-list once */ - if (pgn->flags & DONE_WAIT) + if (pgn->flags.doneWait) continue; - pgn->flags |= DONE_WAIT; + pgn->flags.doneWait = true; DEBUG1(MAKE, "Make_ProcessWait: examine %s\n", pgn->name); if (pgn->type & OP_DOUBLEDEP) Lst_PrependAll(&examine, &pgn->cohorts); owln = pgn->children.first; for (ln = pgn->children.first; ln != NULL; ln = ln->next) { GNode *cgn = ln->datum; if (cgn->type & OP_WAIT) { add_wait_dependency(owln, cgn); owln = ln; } else { Lst_Append(&examine, cgn); } } } Lst_Done(&examine); } /* * Initialize the nodes to remake and the list of nodes which are ready to * be made by doing a breadth-first traversal of the graph starting from the * nodes in the given list. Once this traversal is finished, all the 'leaves' * of the graph are in the toBeMade queue. * * Using this queue and the Job module, work back up the graph, calling on * MakeStartJobs to keep the job table as full as possible. * * Input: * targs the initial list of targets * * Results: * True if work was done, false otherwise. * * Side Effects: * The make field of all nodes involved in the creation of the given * targets is set to 1. The toBeMade list is set to contain all the * 'leaves' of these subgraphs. */ bool Make_Run(GNodeList *targs) { int errors; /* Number of errors the Job module reports */ /* Start trying to make the current targets... */ Lst_Init(&toBeMade); Make_ExpandUse(targs); Make_ProcessWait(targs); if (DEBUG(MAKE)) { debug_printf("#***# full graph\n"); Targ_PrintGraph(1); } if (opts.queryFlag) { /* * We wouldn't do any work unless we could start some jobs * in the next loop... (we won't actually start any, of * course, this is just to see if any of the targets was out * of date) */ return MakeStartJobs(); } /* * Initialization. At the moment, no jobs are running and until some * get started, nothing will happen since the remaining upward * traversal of the graph is performed by the routines in job.c upon * the finishing of a job. So we fill the Job table as much as we can * before going into our loop. */ (void)MakeStartJobs(); /* * Main Loop: The idea here is that the ending of jobs will take * care of the maintenance of data structures and the waiting for * output will cause us to be idle most of the time while our * children run as much as possible. Because the job table is kept * as full as possible, the only time when it will be empty is when * all the jobs which need running have been run, so that is the end * condition of this loop. Note that the Job module will exit if * there were any errors unless the keepgoing flag was given. */ while (!Lst_IsEmpty(&toBeMade) || jobTokensRunning > 0) { Job_CatchOutput(); (void)MakeStartJobs(); } errors = Job_Finish(); /* * Print the final status of each target. E.g. if it wasn't made * because some inferior reported an error. */ DEBUG1(MAKE, "done: errors %d\n", errors); if (errors == 0) { MakePrintStatusList(targs, &errors); if (DEBUG(MAKE)) { debug_printf("done: errors %d\n", errors); if (errors > 0) Targ_PrintGraph(4); } } return errors > 0; } diff --git a/contrib/bmake/make.h b/contrib/bmake/make.h index a074923c643e..6f14c44eb067 100644 --- a/contrib/bmake/make.h +++ b/contrib/bmake/make.h @@ -1,847 +1,866 @@ -/* $NetBSD: make.h,v 1.263 2021/06/21 10:33:11 rillig Exp $ */ +/* $NetBSD: make.h,v 1.270 2021/11/28 23:12:51 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)make.h 8.3 (Berkeley) 6/13/95 */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)make.h 8.3 (Berkeley) 6/13/95 */ /* * make.h -- * The global definitions for pmake */ #ifndef MAKE_MAKE_H #define MAKE_MAKE_H #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include #include #include #include #include #include #include #include #ifdef HAVE_STRING_H #include #else #include #endif #include #include #ifndef FD_CLOEXEC #define FD_CLOEXEC 1 #endif #if defined(__GNUC__) #define MAKE_GNUC_PREREQ(x, y) \ ((__GNUC__ == (x) && __GNUC_MINOR__ >= (y)) || \ (__GNUC__ > (x))) #else /* defined(__GNUC__) */ #define MAKE_GNUC_PREREQ(x, y) 0 #endif /* defined(__GNUC__) */ #if MAKE_GNUC_PREREQ(2, 7) #define MAKE_ATTR_UNUSED __attribute__((__unused__)) #else #define MAKE_ATTR_UNUSED /* delete */ #endif #if MAKE_GNUC_PREREQ(2, 5) #define MAKE_ATTR_DEAD __attribute__((__noreturn__)) #elif defined(__GNUC__) #define MAKE_ATTR_DEAD __volatile #else #define MAKE_ATTR_DEAD /* delete */ #endif #if MAKE_GNUC_PREREQ(2, 7) #define MAKE_ATTR_PRINTFLIKE(fmtarg, firstvararg) \ __attribute__((__format__ (__printf__, fmtarg, firstvararg))) #else #define MAKE_ATTR_PRINTFLIKE(fmtarg, firstvararg) /* delete */ #endif #define MAKE_INLINE static inline MAKE_ATTR_UNUSED + +/* MAKE_STATIC marks a function that may or may not be inlined. */ +#if defined(lint) +/* As of 2021-07-31, NetBSD lint ignores __attribute__((unused)). */ +#define MAKE_STATIC MAKE_INLINE +#else #define MAKE_STATIC static MAKE_ATTR_UNUSED +#endif #if __STDC_VERSION__ >= 199901L || defined(lint) || defined(USE_C99_BOOLEAN) #include +#elif defined(__bool_true_false_are_defined) +/* + * All files of make must be compiled with the same definition of bool. + * Since one of the files includes , that means the header is + * available on this platform. Recompile everything with -DUSE_C99_BOOLEAN. + */ +#error " is included in pre-C99 mode" +#elif defined(bool) || defined(true) || defined(false) +/* + * In pre-C99 mode, make does not expect that bool is already defined. + * You need to ensure that all translation units use the same definition for + * bool. + */ +#error "bool/true/false is defined in pre-C99 mode" #else -#ifndef bool -typedef unsigned int Boolean; -#define bool Boolean -#endif -#ifndef true +typedef unsigned char bool; #define true 1 -#endif -#ifndef false #define false 0 #endif -#endif #include "lst.h" -#include "enum.h" #include "make_malloc.h" #include "str.h" #include "hash.h" #include "make-conf.h" #include "buf.h" /* * some vendors don't have this --sjg */ #if defined(S_IFDIR) && !defined(S_ISDIR) # define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) #endif #if defined(sun) && (defined(__svr4__) || defined(__SVR4)) # define POSIX_SIGNALS #endif /* * The typical flow of states is: * * The direct successful path: * UNMADE -> BEINGMADE -> MADE. * * The direct error path: * UNMADE -> BEINGMADE -> ERROR. * * The successful path when dependencies need to be made first: * UNMADE -> DEFERRED -> REQUESTED -> BEINGMADE -> MADE. * * A node that has dependencies, and one of the dependencies cannot be made: * UNMADE -> DEFERRED -> ABORTED. * * A node that turns out to be up-to-date: * UNMADE -> BEINGMADE -> UPTODATE. */ typedef enum GNodeMade { /* Not examined yet. */ UNMADE, /* The node has been examined but is not yet ready since its * dependencies have to be made first. */ DEFERRED, /* The node is on the toBeMade list. */ REQUESTED, /* The node is already being made. Trying to build a node in this * state indicates a cycle in the graph. */ BEINGMADE, /* Was out-of-date and has been made. */ MADE, /* Was already up-to-date, does not need to be made. */ UPTODATE, /* An error occurred while it was being made. * Used only in compat mode. */ ERROR, /* The target was aborted due to an error making a dependency. * Used only in compat mode. */ ABORTED } GNodeMade; /* * The OP_ constants are used when parsing a dependency line as a way of * communicating to other parts of the program the way in which a target * should be made. * * Some of the OP_ constants can be combined, others cannot. * * See the tests depsrc-*.mk and deptgt-*.mk. */ typedef enum GNodeType { OP_NONE = 0, /* The dependency operator ':' is the most common one. The commands * of this node are executed if any child is out-of-date. */ OP_DEPENDS = 1 << 0, /* The dependency operator '!' always executes its commands, even if * its children are up-to-date. */ OP_FORCE = 1 << 1, /* The dependency operator '::' behaves like ':', except that it * allows multiple dependency groups to be defined. Each of these * groups is executed on its own, independently from the others. * Each individual dependency group is called a cohort. */ OP_DOUBLEDEP = 1 << 2, /* Matches the dependency operators ':', '!' and '::'. */ OP_OPMASK = OP_DEPENDS | OP_FORCE | OP_DOUBLEDEP, /* Don't care if the target doesn't exist and can't be created. */ OP_OPTIONAL = 1 << 3, /* Use associated commands for parents. */ OP_USE = 1 << 4, /* Target is never out of date, but always execute commands anyway. * Its time doesn't matter, so it has none...sort of. */ OP_EXEC = 1 << 5, /* Ignore non-zero exit status from shell commands when creating the * node. */ OP_IGNORE = 1 << 6, /* Don't remove the target when interrupted. */ OP_PRECIOUS = 1 << 7, /* Don't echo commands when executed. */ OP_SILENT = 1 << 8, /* Target is a recursive make so its commands should always be * executed when it is out of date, regardless of the state of the * -n or -t flags. */ OP_MAKE = 1 << 9, /* Target is out-of-date only if any of its children was out-of-date. */ OP_JOIN = 1 << 10, /* Assume the children of the node have been already made. */ OP_MADE = 1 << 11, /* Special .BEGIN, .END or .INTERRUPT. */ OP_SPECIAL = 1 << 12, /* Like .USE, only prepend commands. */ OP_USEBEFORE = 1 << 13, /* The node is invisible to its parents. I.e. it doesn't show up in * the parents' local variables (.IMPSRC, .ALLSRC). */ OP_INVISIBLE = 1 << 14, /* The node does not become the main target, even if it is the first * target in the first makefile. */ OP_NOTMAIN = 1 << 15, /* Not a file target; run always. */ OP_PHONY = 1 << 16, /* Don't search for the file in the path. */ OP_NOPATH = 1 << 17, /* In a dependency line "target: source1 .WAIT source2", source1 is * made first, including its children. Once that is finished, * source2 is made, including its children. The .WAIT keyword may * appear more than once in a single dependency declaration. */ OP_WAIT = 1 << 18, /* .NOMETA do not create a .meta file */ OP_NOMETA = 1 << 19, /* .META we _do_ want a .meta file */ OP_META = 1 << 20, /* Do not compare commands in .meta file */ OP_NOMETA_CMP = 1 << 21, /* Possibly a submake node */ OP_SUBMAKE = 1 << 22, /* Attributes applied by PMake */ /* The node is a transformation rule, such as ".c.o". */ OP_TRANSFORM = 1 << 30, /* Target is a member of an archive */ /* XXX: How does this differ from OP_ARCHV? */ OP_MEMBER = 1 << 29, /* The node is a library, * its name has the form "-l" */ OP_LIB = 1 << 28, /* The node is an archive member, * its name has the form "archive(member)" */ /* XXX: How does this differ from OP_MEMBER? */ OP_ARCHV = 1 << 27, /* Target has all the commands it should. Used when parsing to catch * multiple command groups for a target. Only applies to the * dependency operators ':' and '!', but not to '::'. */ OP_HAS_COMMANDS = 1 << 26, /* The special command "..." has been seen. All further commands from * this node will be saved on the .END node instead, to be executed at * the very end. */ OP_SAVE_CMDS = 1 << 25, /* Already processed by Suff_FindDeps, to find dependencies from * suffix transformation rules. */ OP_DEPS_FOUND = 1 << 24, /* Node found while expanding .ALLSRC */ OP_MARK = 1 << 23, OP_NOTARGET = OP_NOTMAIN | OP_USE | OP_EXEC | OP_TRANSFORM } GNodeType; -typedef enum GNodeFlags { - GNF_NONE = 0, +typedef struct GNodeFlags { /* this target needs to be (re)made */ - REMAKE = 1 << 0, + bool remake:1; /* children of this target were made */ - CHILDMADE = 1 << 1, + bool childMade:1; /* children don't exist, and we pretend made */ - FORCE = 1 << 2, + bool force:1; /* Set by Make_ProcessWait() */ - DONE_WAIT = 1 << 3, + bool doneWait:1; /* Build requested by .ORDER processing */ - DONE_ORDER = 1 << 4, + bool doneOrder:1; /* Node created from .depend */ - FROM_DEPEND = 1 << 5, + bool fromDepend:1; /* We do it once only */ - DONE_ALLSRC = 1 << 6, + bool doneAllsrc:1; /* Used by MakePrintStatus */ - CYCLE = 1 << 12, + bool cycle:1; /* Used by MakePrintStatus */ - DONECYCLE = 1 << 13 + bool doneCycle:1; } GNodeFlags; typedef struct List StringList; typedef struct ListNode StringListNode; typedef struct List GNodeList; typedef struct ListNode GNodeListNode; typedef struct SearchPath { List /* of CachedDir */ dirs; } SearchPath; /* * A graph node represents a target that can possibly be made, including its * relation to other targets and a lot of other details. */ typedef struct GNode { /* The target's name, such as "clean" or "make.c" */ char *name; /* The unexpanded name of a .USE node */ char *uname; /* The full pathname of the file belonging to the target. * XXX: What about .PHONY targets? These don't have an associated * path. */ char *path; /* The type of operator used to define the sources (see the OP flags * below). * XXX: This looks like a wild mixture of type and flags. */ GNodeType type; GNodeFlags flags; /* The state of processing on this node */ GNodeMade made; /* The number of unmade children */ int unmade; /* The modification time; 0 means the node does not have a * corresponding file; see GNode_IsOODate. */ time_t mtime; struct GNode *youngestChild; /* The GNodes for which this node is an implied source. May be empty. * For example, when there is an inference rule for .c.o, the node for * file.c has the node for file.o in this list. */ GNodeList implicitParents; /* The nodes that depend on this one, or in other words, the nodes for * which this is a source. */ GNodeList parents; /* The nodes on which this one depends. */ GNodeList children; /* .ORDER nodes we need made. The nodes that must be made (if they're * made) before this node can be made, but that do not enter into the * datedness of this node. */ GNodeList order_pred; /* .ORDER nodes who need us. The nodes that must be made (if they're * made at all) after this node is made, but that do not depend on * this node, in the normal sense. */ GNodeList order_succ; /* * Other nodes of the same name, for targets that were defined using * the '::' dependency operator (OP_DOUBLEDEP). */ GNodeList cohorts; /* The "#n" suffix for this cohort, or "" for other nodes */ char cohort_num[8]; /* The number of unmade instances on the cohorts list */ int unmade_cohorts; /* Pointer to the first instance of a '::' node; only set when on a * cohorts list */ struct GNode *centurion; /* Last time (sequence number) we tried to make this node */ unsigned int checked_seqno; /* * The "local" variables that are specific to this target and this * target only, such as $@, $<, $?. * * Also used for the global variable scopes SCOPE_GLOBAL, * SCOPE_CMDLINE, SCOPE_INTERNAL, which contain variables with * arbitrary names. */ HashTable /* of Var pointer */ vars; /* The commands to be given to a shell to create this target. */ StringList commands; /* Suffix for the node (determined by Suff_FindDeps and opaque to * everyone but the Suff module) */ struct Suffix *suffix; /* Filename where the GNode got defined */ /* XXX: What is the lifetime of this string? */ const char *fname; /* Line number where the GNode got defined */ int lineno; } GNode; /* Error levels for diagnostics during parsing. */ typedef enum ParseErrorLevel { /* Exit when the current top-level makefile has been parsed * completely. */ PARSE_FATAL = 1, /* Print "warning"; may be upgraded to fatal by the -w option. */ PARSE_WARNING, /* Informational, mainly used during development of makefiles. */ PARSE_INFO } ParseErrorLevel; /* * Values returned by Cond_EvalLine and Cond_EvalCondition. */ typedef enum CondEvalResult { COND_PARSE, /* Parse the next lines */ COND_SKIP, /* Skip the next lines */ COND_INVALID /* Not a conditional statement */ } CondEvalResult; /* Names of the variables that are "local" to a specific target. */ #define TARGET "@" /* Target of dependency */ #define OODATE "?" /* All out-of-date sources */ #define ALLSRC ">" /* All sources */ #define IMPSRC "<" /* Source implied by transformation */ #define PREFIX "*" /* Common prefix */ #define ARCHIVE "!" /* Archive in "archive(member)" syntax */ #define MEMBER "%" /* Member in "archive(member)" syntax */ /* * Global Variables */ /* True if every target is precious */ extern bool allPrecious; /* True if failed targets should be deleted */ extern bool deleteOnError; /* true while processing .depend */ extern bool doing_depend; /* .DEFAULT rule */ extern GNode *defaultNode; /* * Variables defined internally by make which should not override those set * by makefiles. */ extern GNode *SCOPE_INTERNAL; /* Variables defined in a global scope, e.g in the makefile itself. */ extern GNode *SCOPE_GLOBAL; /* Variables defined on the command line. */ extern GNode *SCOPE_CMDLINE; /* * Value returned by Var_Parse when an error is encountered. It actually * points to an empty string, so naive callers needn't worry about it. */ extern char var_Error[]; /* The time at the start of this whole process */ extern time_t now; /* * The list of directories to search when looking for targets (set by the * special target .PATH). */ extern SearchPath dirSearchPath; /* Used for .include "...". */ extern SearchPath *parseIncPath; /* * Used for .include <...>, for the built-in sys.mk and for makefiles from * the command line arguments. */ extern SearchPath *sysIncPath; /* The default for sysIncPath. */ extern SearchPath *defSysIncPath; /* Startup directory */ extern char curdir[]; /* The basename of the program name, suffixed with [n] for sub-makes. */ extern const char *progname; extern int makelevel; /* Name of the .depend makefile */ extern char *makeDependfile; /* If we replaced environ, this will be non-NULL. */ extern char **savedEnv; extern pid_t myPid; #define MAKEFLAGS ".MAKEFLAGS" #define MAKEOVERRIDES ".MAKEOVERRIDES" /* prefix when printing the target of a job */ #define MAKE_JOB_PREFIX ".MAKE.JOB.PREFIX" #define MAKE_EXPORTED ".MAKE.EXPORTED" /* exported variables */ #define MAKE_MAKEFILES ".MAKE.MAKEFILES" /* all loaded makefiles */ #define MAKE_LEVEL ".MAKE.LEVEL" /* recursion level */ #define MAKE_MAKEFILE_PREFERENCE ".MAKE.MAKEFILE_PREFERENCE" #define MAKE_DEPENDFILE ".MAKE.DEPENDFILE" /* .depend */ #define MAKE_MODE ".MAKE.MODE" #ifndef MAKE_LEVEL_ENV # define MAKE_LEVEL_ENV "MAKELEVEL" #endif typedef enum DebugFlags { DEBUG_NONE = 0, DEBUG_ARCH = 1 << 0, DEBUG_COND = 1 << 1, DEBUG_CWD = 1 << 2, DEBUG_DIR = 1 << 3, DEBUG_ERROR = 1 << 4, DEBUG_FOR = 1 << 5, DEBUG_GRAPH1 = 1 << 6, DEBUG_GRAPH2 = 1 << 7, DEBUG_GRAPH3 = 1 << 8, DEBUG_HASH = 1 << 9, DEBUG_JOB = 1 << 10, DEBUG_LOUD = 1 << 11, DEBUG_MAKE = 1 << 12, DEBUG_META = 1 << 13, DEBUG_PARSE = 1 << 14, DEBUG_SCRIPT = 1 << 15, DEBUG_SHELL = 1 << 16, DEBUG_SUFF = 1 << 17, DEBUG_TARG = 1 << 18, DEBUG_VAR = 1 << 19, DEBUG_ALL = (1 << 20) - 1 } DebugFlags; #define CONCAT(a, b) a##b #define DEBUG(module) ((opts.debug & CONCAT(DEBUG_, module)) != 0) void debug_printf(const char *, ...) MAKE_ATTR_PRINTFLIKE(1, 2); #define DEBUG_IMPL(module, args) \ do { \ if (DEBUG(module)) \ debug_printf args; \ - } while (/*CONSTCOND*/false) + } while (false) #define DEBUG0(module, text) \ DEBUG_IMPL(module, ("%s", text)) #define DEBUG1(module, fmt, arg1) \ DEBUG_IMPL(module, (fmt, arg1)) #define DEBUG2(module, fmt, arg1, arg2) \ DEBUG_IMPL(module, (fmt, arg1, arg2)) #define DEBUG3(module, fmt, arg1, arg2, arg3) \ DEBUG_IMPL(module, (fmt, arg1, arg2, arg3)) #define DEBUG4(module, fmt, arg1, arg2, arg3, arg4) \ DEBUG_IMPL(module, (fmt, arg1, arg2, arg3, arg4)) #define DEBUG5(module, fmt, arg1, arg2, arg3, arg4, arg5) \ DEBUG_IMPL(module, (fmt, arg1, arg2, arg3, arg4, arg5)) typedef enum PrintVarsMode { PVM_NONE, PVM_UNEXPANDED, PVM_EXPANDED } PrintVarsMode; /* Command line options */ typedef struct CmdOpts { /* -B: whether we are make compatible */ bool compatMake; /* -d: debug control: There is one bit per module. It is up to the * module what debug information to print. */ DebugFlags debug; /* -df: debug output is written here - default stderr */ FILE *debug_file; /* -dL: lint mode * * Runs make in strict mode, with additional checks and better error * handling. */ bool strict; /* -dV: for the -V option, print unexpanded variable values */ bool debugVflag; /* -e: check environment variables before global variables */ bool checkEnvFirst; /* -f: the makefiles to read */ StringList makefiles; /* -i: if true, ignore all errors from shell commands */ bool ignoreErrors; /* -j: the maximum number of jobs that can run in parallel; * this is coordinated with the submakes */ int maxJobs; /* -k: if true and an error occurs while making a node, continue * making nodes that do not depend on the erroneous node */ bool keepgoing; /* -N: execute no commands from the targets */ bool noRecursiveExecute; /* -n: execute almost no commands from the targets */ bool noExecute; /* * -q: if true, do not really make anything, just see if the targets * are out-of-date */ bool queryFlag; /* -r: raw mode, do not load the builtin rules. */ bool noBuiltins; /* -s: don't echo the shell commands before executing them */ bool beSilent; /* -t: touch the targets if they are out-of-date, but don't actually * make them */ bool touchFlag; /* -[Vv]: print expanded or unexpanded selected variables */ PrintVarsMode printVars; /* -[Vv]: the variables to print */ StringList variables; /* -W: if true, makefile parsing warnings are treated as errors */ bool parseWarnFatal; /* -w: print 'Entering' and 'Leaving' for submakes */ bool enterFlag; /* -X: if true, do not export variables set on the command line to the * environment. */ bool varNoExportEnv; /* The target names specified on the command line. * Used to resolve .if make(...) statements. */ StringList create; } CmdOpts; extern CmdOpts opts; #include "nonints.h" void GNode_UpdateYoungestChild(GNode *, GNode *); bool GNode_IsOODate(GNode *); void Make_ExpandUse(GNodeList *); time_t Make_Recheck(GNode *); void Make_HandleUse(GNode *, GNode *); void Make_Update(GNode *); void GNode_SetLocalVars(GNode *); bool Make_Run(GNodeList *); bool shouldDieQuietly(GNode *, int); void PrintOnError(GNode *, const char *); void Main_ExportMAKEFLAGS(bool); bool Main_SetObjdir(bool, const char *, ...) MAKE_ATTR_PRINTFLIKE(2, 3); int mkTempFile(const char *, char *, size_t); int str2Lst_Append(StringList *, char *); void GNode_FprintDetails(FILE *, const char *, const GNode *, const char *); bool GNode_ShouldExecute(GNode *gn); /* See if the node was seen on the left-hand side of a dependency operator. */ MAKE_INLINE bool GNode_IsTarget(const GNode *gn) { - return (gn->type & OP_OPMASK) != 0; + return (gn->type & OP_OPMASK) != OP_NONE; } MAKE_INLINE const char * GNode_Path(const GNode *gn) { return gn->path != NULL ? gn->path : gn->name; } MAKE_INLINE bool GNode_IsWaitingFor(const GNode *gn) { - return (gn->flags & REMAKE) && gn->made <= REQUESTED; + return gn->flags.remake && gn->made <= REQUESTED; } MAKE_INLINE bool GNode_IsReady(const GNode *gn) { return gn->made > DEFERRED; } MAKE_INLINE bool GNode_IsDone(const GNode *gn) { return gn->made >= MADE; } MAKE_INLINE bool GNode_IsError(const GNode *gn) { return gn->made == ERROR || gn->made == ABORTED; } MAKE_INLINE const char * GNode_VarTarget(GNode *gn) { return GNode_ValueDirect(gn, TARGET); } MAKE_INLINE const char * GNode_VarOodate(GNode *gn) { return GNode_ValueDirect(gn, OODATE); } MAKE_INLINE const char * GNode_VarAllsrc(GNode *gn) { return GNode_ValueDirect(gn, ALLSRC); } MAKE_INLINE const char * GNode_VarImpsrc(GNode *gn) { return GNode_ValueDirect(gn, IMPSRC); } MAKE_INLINE const char * GNode_VarPrefix(GNode *gn) { return GNode_ValueDirect(gn, PREFIX); } MAKE_INLINE const char * GNode_VarArchive(GNode *gn) { return GNode_ValueDirect(gn, ARCHIVE); } MAKE_INLINE const char * GNode_VarMember(GNode *gn) { return GNode_ValueDirect(gn, MEMBER); } -#if defined(__GNUC__) && __STDC_VERSION__ >= 199901L -#define UNCONST(ptr) ({ \ - union __unconst { \ - const void *__cp; \ - void *__p; \ - } __d; \ - __d.__cp = ptr, __d.__p; }) -#else -#define UNCONST(ptr) (void *)(ptr) -#endif +MAKE_INLINE void * +UNCONST(const void *ptr) +{ + void *ret; + memcpy(&ret, &ptr, sizeof(ret)); + return ret; +} /* At least GNU/Hurd systems lack hardcoded MAXPATHLEN/PATH_MAX */ #ifdef HAVE_LIMITS_H #include #endif #ifndef MAXPATHLEN #define MAXPATHLEN BMAKE_PATH_MAX #endif #ifndef PATH_MAX #define PATH_MAX MAXPATHLEN #endif #if defined(SYSV) #define KILLPG(pid, sig) kill(-(pid), (sig)) #else #define KILLPG(pid, sig) killpg((pid), (sig)) #endif MAKE_INLINE bool ch_isalnum(char ch) { return isalnum((unsigned char)ch) != 0; } MAKE_INLINE bool ch_isalpha(char ch) { return isalpha((unsigned char)ch) != 0; } MAKE_INLINE bool ch_isdigit(char ch) { return isdigit((unsigned char)ch) != 0; } MAKE_INLINE bool ch_isspace(char ch) { return isspace((unsigned char)ch) != 0; } MAKE_INLINE bool ch_isupper(char ch) { return isupper((unsigned char)ch) != 0; } MAKE_INLINE char ch_tolower(char ch) { return (char)tolower((unsigned char)ch); } MAKE_INLINE char ch_toupper(char ch) { return (char)toupper((unsigned char)ch); } MAKE_INLINE void cpp_skip_whitespace(const char **pp) { while (ch_isspace(**pp)) (*pp)++; } MAKE_INLINE void cpp_skip_hspace(const char **pp) { while (**pp == ' ' || **pp == '\t') (*pp)++; } MAKE_INLINE void pp_skip_whitespace(char **pp) { while (ch_isspace(**pp)) (*pp)++; } MAKE_INLINE void pp_skip_hspace(char **pp) { while (**pp == ' ' || **pp == '\t') (*pp)++; } #if defined(lint) # define MAKE_RCSID(id) extern void do_not_define_rcsid(void) #elif defined(MAKE_NATIVE) # include +# ifndef __IDSTRING +# define __IDSTRING(name,string) \ + static const char name[] MAKE_ATTR_UNUSED = string +# endif +# ifndef __RCSID +# define __RCSID(s) __IDSTRING(rcsid,s) +# endif +# ifndef __COPYRIGHT +# define __COPYRIGHT(s) __IDSTRING(copyright,s) +# endif # define MAKE_RCSID(id) __RCSID(id) #elif defined(MAKE_ALL_IN_ONE) && defined(__COUNTER__) # define MAKE_RCSID_CONCAT(x, y) CONCAT(x, y) # define MAKE_RCSID(id) static volatile char \ MAKE_RCSID_CONCAT(rcsid_, __COUNTER__)[] = id #elif defined(MAKE_ALL_IN_ONE) # define MAKE_RCSID(id) extern void do_not_define_rcsid(void) #else # define MAKE_RCSID(id) static volatile char rcsid[] = id #endif #endif /* MAKE_MAKE_H */ diff --git a/contrib/bmake/meta.c b/contrib/bmake/meta.c index c1f78136fb7c..67c57647f2af 100644 --- a/contrib/bmake/meta.c +++ b/contrib/bmake/meta.c @@ -1,1721 +1,1729 @@ -/* $NetBSD: meta.c,v 1.181 2021/04/04 10:05:08 rillig Exp $ */ +/* $NetBSD: meta.c,v 1.185 2021/11/27 22:04:02 rillig Exp $ */ /* * Implement 'meta' mode. * Adapted from John Birrell's patches to FreeBSD make. * --sjg */ /* * Copyright (c) 2009-2016, Juniper Networks, Inc. * Portions Copyright (c) 2009, John Birrell. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #if defined(USE_META) #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #ifdef HAVE_LIBGEN_H #include #elif !defined(HAVE_DIRNAME) char * dirname(char *); #endif #include #if !defined(HAVE_CONFIG_H) || defined(HAVE_ERR_H) #include #endif #include "make.h" #include "dir.h" #include "job.h" #ifdef USE_FILEMON #include "filemon/filemon.h" #endif static BuildMon Mybm; /* for compat */ static StringList metaBailiwick = LST_INIT; /* our scope of control */ static char *metaBailiwickStr; /* string storage for the list */ static StringList metaIgnorePaths = LST_INIT; /* paths we deliberately ignore */ static char *metaIgnorePathsStr; /* string storage for the list */ #ifndef MAKE_META_IGNORE_PATHS #define MAKE_META_IGNORE_PATHS ".MAKE.META.IGNORE_PATHS" #endif #ifndef MAKE_META_IGNORE_PATTERNS #define MAKE_META_IGNORE_PATTERNS ".MAKE.META.IGNORE_PATTERNS" #endif #ifndef MAKE_META_IGNORE_FILTER #define MAKE_META_IGNORE_FILTER ".MAKE.META.IGNORE_FILTER" #endif bool useMeta = false; static bool useFilemon = false; static bool writeMeta = false; static bool metaMissing = false; /* oodate if missing */ static bool filemonMissing = false; /* oodate if missing */ static bool metaEnv = false; /* don't save env unless asked */ static bool metaVerbose = false; static bool metaIgnoreCMDs = false; /* ignore CMDs in .meta files */ static bool metaIgnorePatterns = false; /* do we need to do pattern matches */ static bool metaIgnoreFilter = false; /* do we have more complex filtering? */ static bool metaCurdirOk = false; /* write .meta in .CURDIR Ok? */ static bool metaSilent = false; /* if we have a .meta be SILENT */ extern bool forceJobs; extern char **environ; #define MAKE_META_PREFIX ".MAKE.META.PREFIX" #ifndef N2U # define N2U(n, u) (((n) + ((u) - 1)) / (u)) #endif #ifndef ROUNDUP # define ROUNDUP(n, u) (N2U((n), (u)) * (u)) #endif #if !defined(HAVE_STRSEP) # define strsep(s, d) stresep((s), (d), '\0') #endif +#if !defined(HAVE_STRESEP) +char * stresep(char **, const char *, int); +#endif /* * Filemon is a kernel module which snoops certain syscalls. * * C chdir * E exec * F [v]fork * L [sym]link * M rename * R read * W write * S stat * * See meta_oodate below - we mainly care about 'E' and 'R'. * * We can still use meta mode without filemon, but * the benefits are more limited. */ #ifdef USE_FILEMON /* * Open the filemon device. */ static void meta_open_filemon(BuildMon *pbm) { int dupfd; pbm->mon_fd = -1; pbm->filemon = NULL; if (!useFilemon || pbm->mfp == NULL) return; pbm->filemon = filemon_open(); if (pbm->filemon == NULL) { useFilemon = false; warn("Could not open filemon %s", filemon_path()); return; } /* * We use a file outside of '.' * to avoid a FreeBSD kernel bug where unlink invalidates * cwd causing getcwd to do a lot more work. * We only care about the descriptor. */ if (!opts.compatMake) pbm->mon_fd = Job_TempFile("filemon.XXXXXX", NULL, 0); else pbm->mon_fd = mkTempFile("filemon.XXXXXX", NULL, 0); if ((dupfd = dup(pbm->mon_fd)) == -1) { - err(1, "Could not dup filemon output!"); + Punt("Could not dup filemon output: %s", strerror(errno)); } (void)fcntl(dupfd, F_SETFD, FD_CLOEXEC); if (filemon_setfd(pbm->filemon, dupfd) == -1) { - err(1, "Could not set filemon file descriptor!"); + Punt("Could not set filemon file descriptor: %s", strerror(errno)); } /* we don't need these once we exec */ (void)fcntl(pbm->mon_fd, F_SETFD, FD_CLOEXEC); } /* * Read the build monitor output file and write records to the target's * metadata file. */ static int filemon_read(FILE *mfp, int fd) { char buf[BUFSIZ]; int error; /* Check if we're not writing to a meta data file.*/ if (mfp == NULL) { if (fd >= 0) close(fd); /* not interested */ return 0; } /* rewind */ if (lseek(fd, (off_t)0, SEEK_SET) < 0) { error = errno; warn("Could not rewind filemon"); fprintf(mfp, "\n"); } else { ssize_t n; error = 0; fprintf(mfp, "\n-- filemon acquired metadata --\n"); while ((n = read(fd, buf, sizeof buf)) > 0) { if ((ssize_t)fwrite(buf, 1, (size_t)n, mfp) < n) error = EIO; } } - fflush(mfp); + if (fflush(mfp) != 0) + Punt("Cannot write filemon data to meta file: %s", + strerror(errno)); if (close(fd) < 0) error = errno; return error; } #endif /* * when realpath() fails, * we use this, to clean up ./ and ../ */ static void eat_dots(char *buf, size_t bufsz, int dots) { char *cp; char *cp2; const char *eat; size_t eatlen; switch (dots) { case 1: eat = "/./"; eatlen = 2; break; case 2: eat = "/../"; eatlen = 3; break; default: return; } do { cp = strstr(buf, eat); if (cp != NULL) { cp2 = cp + eatlen; if (dots == 2 && cp > buf) { do { cp--; } while (cp > buf && *cp != '/'); } if (*cp == '/') { strlcpy(cp, cp2, bufsz - (size_t)(cp - buf)); } else { return; /* can't happen? */ } } } while (cp != NULL); } static char * meta_name(char *mname, size_t mnamelen, const char *dname, const char *tname, const char *cwd) { char buf[MAXPATHLEN]; - char *rp; - char *cp; + char *rp, *cp; + const char *tname_base; char *tp; char *dtp; size_t ldname; /* * Weed out relative paths from the target file name. * We have to be careful though since if target is a * symlink, the result will be unstable. * So we use realpath() just to get the dirname, and leave the * basename as given to us. */ - if ((cp = strrchr(tname, '/')) != NULL) { + if ((tname_base = strrchr(tname, '/')) != NULL) { if (cached_realpath(tname, buf) != NULL) { if ((rp = strrchr(buf, '/')) != NULL) { rp++; - cp++; - if (strcmp(cp, rp) != 0) - strlcpy(rp, cp, sizeof buf - (size_t)(rp - buf)); + tname_base++; + if (strcmp(tname_base, rp) != 0) + strlcpy(rp, tname_base, sizeof buf - (size_t)(rp - buf)); } tname = buf; } else { /* * We likely have a directory which is about to be made. * We pretend realpath() succeeded, to have a chance * of generating the same meta file name that we will * next time through. */ if (tname[0] == '/') { strlcpy(buf, tname, sizeof buf); } else { snprintf(buf, sizeof buf, "%s/%s", cwd, tname); } eat_dots(buf, sizeof buf, 1); /* ./ */ eat_dots(buf, sizeof buf, 2); /* ../ */ tname = buf; } } /* on some systems dirname may modify its arg */ tp = bmake_strdup(tname); dtp = dirname(tp); if (strcmp(dname, dtp) == 0) snprintf(mname, mnamelen, "%s.meta", tname); else { ldname = strlen(dname); if (strncmp(dname, dtp, ldname) == 0 && dtp[ldname] == '/') snprintf(mname, mnamelen, "%s/%s.meta", dname, &tname[ldname+1]); else snprintf(mname, mnamelen, "%s/%s.meta", dname, tname); /* * Replace path separators in the file name after the * current object directory path. */ cp = mname + strlen(dname) + 1; while (*cp != '\0') { if (*cp == '/') *cp = '_'; cp++; } } free(tp); return mname; } /* * Return true if running ${.MAKE} * Bypassed if target is flagged .MAKE */ static bool is_submake(const char *cmd, GNode *gn) { static const char *p_make = NULL; static size_t p_len; char *mp = NULL; - char *cp; - char *cp2; + const char *cp, *cp2; bool rc = false; if (p_make == NULL) { p_make = Var_Value(gn, ".MAKE").str; p_len = strlen(p_make); } cp = strchr(cmd, '$'); if (cp != NULL) { (void)Var_Subst(cmd, gn, VARE_WANTRES, &mp); /* TODO: handle errors */ cmd = mp; } cp2 = strstr(cmd, p_make); if (cp2 != NULL) { switch (cp2[p_len]) { case '\0': case ' ': case '\t': case '\n': rc = true; break; } if (cp2 > cmd && rc) { switch (cp2[-1]) { case ' ': case '\t': case '\n': break; default: rc = false; /* no match */ break; } } } free(mp); return rc; } static bool any_is_submake(GNode *gn) { StringListNode *ln; for (ln = gn->commands.first; ln != NULL; ln = ln->next) if (is_submake(ln->datum, gn)) return true; return false; } static void printCMD(const char *ucmd, FILE *fp, GNode *gn) { FStr xcmd = FStr_InitRefer(ucmd); if (strchr(ucmd, '$') != NULL) { char *expanded; (void)Var_Subst(ucmd, gn, VARE_WANTRES, &expanded); /* TODO: handle errors */ xcmd = FStr_InitOwn(expanded); } fprintf(fp, "CMD %s\n", xcmd.str); FStr_Done(&xcmd); } static void printCMDs(GNode *gn, FILE *fp) { StringListNode *ln; for (ln = gn->commands.first; ln != NULL; ln = ln->next) printCMD(ln->datum, fp, gn); } /* * Certain node types never get a .meta file */ #define SKIP_META_TYPE(_type) do { \ if ((gn->type & __CONCAT(OP_, _type))) { \ if (verbose) { \ debug_printf("Skipping meta for %s: .%s\n", \ gn->name, __STRING(_type)); \ } \ return false; \ } \ -} while (/*CONSTCOND*/false) +} while (false) /* * Do we need/want a .meta file ? */ static bool meta_needed(GNode *gn, const char *dname, char *objdir_realpath, bool verbose) { struct cached_stat cst; if (verbose) verbose = DEBUG(META); /* This may be a phony node which we don't want meta data for... */ /* Skip .meta for .BEGIN, .END, .ERROR etc as well. */ /* Or it may be explicitly flagged as .NOMETA */ SKIP_META_TYPE(NOMETA); /* Unless it is explicitly flagged as .META */ if (!(gn->type & OP_META)) { SKIP_META_TYPE(PHONY); SKIP_META_TYPE(SPECIAL); SKIP_META_TYPE(MAKE); } /* Check if there are no commands to execute. */ if (Lst_IsEmpty(&gn->commands)) { if (verbose) debug_printf("Skipping meta for %s: no commands\n", gn->name); return false; } if ((gn->type & (OP_META|OP_SUBMAKE)) == OP_SUBMAKE) { /* OP_SUBMAKE is a bit too aggressive */ if (any_is_submake(gn)) { DEBUG1(META, "Skipping meta for %s: .SUBMAKE\n", gn->name); return false; } } /* The object directory may not exist. Check it.. */ if (cached_stat(dname, &cst) != 0) { if (verbose) debug_printf("Skipping meta for %s: no .OBJDIR\n", gn->name); return false; } /* make sure these are canonical */ if (cached_realpath(dname, objdir_realpath) != NULL) dname = objdir_realpath; /* If we aren't in the object directory, don't create a meta file. */ if (!metaCurdirOk && strcmp(curdir, dname) == 0) { if (verbose) debug_printf("Skipping meta for %s: .OBJDIR == .CURDIR\n", gn->name); return false; } return true; } static FILE * meta_create(BuildMon *pbm, GNode *gn) { FILE *fp; char buf[MAXPATHLEN]; char objdir_realpath[MAXPATHLEN]; char **ptr; FStr dname; const char *tname; char *fname; const char *cp; fp = NULL; dname = Var_Value(gn, ".OBJDIR"); tname = GNode_VarTarget(gn); /* if this succeeds objdir_realpath is realpath of dname */ if (!meta_needed(gn, dname.str, objdir_realpath, true)) goto out; dname.str = objdir_realpath; if (metaVerbose) { char *mp; /* Describe the target we are building */ (void)Var_Subst("${" MAKE_META_PREFIX "}", gn, VARE_WANTRES, &mp); /* TODO: handle errors */ if (mp[0] != '\0') fprintf(stdout, "%s\n", mp); free(mp); } /* Get the basename of the target */ cp = str_basename(tname); fflush(stdout); if (!writeMeta) /* Don't create meta data. */ goto out; fname = meta_name(pbm->meta_fname, sizeof pbm->meta_fname, dname.str, tname, objdir_realpath); #ifdef DEBUG_META_MODE DEBUG1(META, "meta_create: %s\n", fname); #endif if ((fp = fopen(fname, "w")) == NULL) - err(1, "Could not open meta file '%s'", fname); + Punt("Could not open meta file '%s': %s", fname, strerror(errno)); fprintf(fp, "# Meta data file %s\n", fname); printCMDs(gn, fp); fprintf(fp, "CWD %s\n", getcwd(buf, sizeof buf)); fprintf(fp, "TARGET %s\n", tname); cp = GNode_VarOodate(gn); if (cp != NULL && *cp != '\0') { fprintf(fp, "OODATE %s\n", cp); } if (metaEnv) { for (ptr = environ; *ptr != NULL; ptr++) fprintf(fp, "ENV %s\n", *ptr); } fprintf(fp, "-- command output --\n"); - fflush(fp); + if (fflush(fp) != 0) + Punt("Cannot write expanded command to meta file: %s", + strerror(errno)); Global_Append(".MAKE.META.FILES", fname); Global_Append(".MAKE.META.CREATED", fname); gn->type |= OP_META; /* in case anyone wants to know */ if (metaSilent) { gn->type |= OP_SILENT; } out: FStr_Done(&dname); return fp; } static bool -boolValue(char *s) +boolValue(const char *s) { - switch(*s) { + switch (*s) { case '0': case 'N': case 'n': case 'F': case 'f': return false; } return true; } /* * Initialization we need before reading makefiles. */ void meta_init(void) { #ifdef USE_FILEMON /* this allows makefiles to test if we have filemon support */ Global_Set(".MAKE.PATH_FILEMON", filemon_path()); #endif } #define get_mode_bf(bf, token) \ if ((cp = strstr(make_mode, token)) != NULL) \ bf = boolValue(cp + sizeof (token) - 1) /* * Initialization we need after reading makefiles. */ void meta_mode_init(const char *make_mode) { static bool once = false; - char *cp; + const char *cp; FStr value; useMeta = true; useFilemon = true; writeMeta = true; if (make_mode != NULL) { if (strstr(make_mode, "env") != NULL) metaEnv = true; if (strstr(make_mode, "verb") != NULL) metaVerbose = true; if (strstr(make_mode, "read") != NULL) writeMeta = false; if (strstr(make_mode, "nofilemon") != NULL) useFilemon = false; if (strstr(make_mode, "ignore-cmd") != NULL) metaIgnoreCMDs = true; if (useFilemon) get_mode_bf(filemonMissing, "missing-filemon="); get_mode_bf(metaCurdirOk, "curdirok="); get_mode_bf(metaMissing, "missing-meta="); get_mode_bf(metaSilent, "silent="); } if (metaVerbose && !Var_Exists(SCOPE_GLOBAL, MAKE_META_PREFIX)) { /* * The default value for MAKE_META_PREFIX * prints the absolute path of the target. * This works be cause :H will generate '.' if there is no / * and :tA will resolve that to cwd. */ Global_Set(MAKE_META_PREFIX, "Building ${.TARGET:H:tA}/${.TARGET:T}"); } if (once) return; once = true; memset(&Mybm, 0, sizeof Mybm); /* * We consider ourselves master of all within ${.MAKE.META.BAILIWICK} */ (void)Var_Subst("${.MAKE.META.BAILIWICK:O:u:tA}", SCOPE_GLOBAL, VARE_WANTRES, &metaBailiwickStr); /* TODO: handle errors */ str2Lst_Append(&metaBailiwick, metaBailiwickStr); /* * We ignore any paths that start with ${.MAKE.META.IGNORE_PATHS} */ Global_Append(MAKE_META_IGNORE_PATHS, "/dev /etc /proc /tmp /var/run /var/tmp ${TMPDIR}"); (void)Var_Subst("${" MAKE_META_IGNORE_PATHS ":O:u:tA}", SCOPE_GLOBAL, VARE_WANTRES, &metaIgnorePathsStr); /* TODO: handle errors */ str2Lst_Append(&metaIgnorePaths, metaIgnorePathsStr); /* * We ignore any paths that match ${.MAKE.META.IGNORE_PATTERNS} */ value = Var_Value(SCOPE_GLOBAL, MAKE_META_IGNORE_PATTERNS); if (value.str != NULL) { metaIgnorePatterns = true; FStr_Done(&value); } value = Var_Value(SCOPE_GLOBAL, MAKE_META_IGNORE_FILTER); if (value.str != NULL) { metaIgnoreFilter = true; FStr_Done(&value); } } /* * In each case below we allow for job==NULL */ void meta_job_start(Job *job, GNode *gn) { BuildMon *pbm; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } pbm->mfp = meta_create(pbm, gn); #ifdef USE_FILEMON_ONCE /* compat mode we open the filemon dev once per command */ if (job == NULL) return; #endif #ifdef USE_FILEMON if (pbm->mfp != NULL && useFilemon) { meta_open_filemon(pbm); } else { pbm->mon_fd = -1; pbm->filemon = NULL; } #endif } /* * The child calls this before doing anything. * It does not disturb our state. */ void meta_job_child(Job *job) { #ifdef USE_FILEMON BuildMon *pbm; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } if (pbm->mfp != NULL) { close(fileno(pbm->mfp)); if (useFilemon && pbm->filemon != NULL) { pid_t pid; pid = getpid(); if (filemon_setpid_child(pbm->filemon, pid) == -1) { - err(1, "Could not set filemon pid!"); + Punt("Could not set filemon pid: %s", strerror(errno)); } } } #endif } void meta_job_parent(Job *job, pid_t pid) { #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) BuildMon *pbm; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } if (useFilemon && pbm->filemon != NULL) { filemon_setpid_parent(pbm->filemon, pid); } #endif } int meta_job_fd(Job *job) { #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) BuildMon *pbm; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } if (useFilemon && pbm->filemon != NULL) { return filemon_readfd(pbm->filemon); } #endif return -1; } int meta_job_event(Job *job) { #if defined(USE_FILEMON) && !defined(USE_FILEMON_DEV) BuildMon *pbm; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } if (useFilemon && pbm->filemon != NULL) { return filemon_process(pbm->filemon); } #endif return 0; } void meta_job_error(Job *job, GNode *gn, bool ignerr, int status) { char cwd[MAXPATHLEN]; BuildMon *pbm; if (job != NULL) { pbm = &job->bm; if (gn == NULL) gn = job->node; } else { pbm = &Mybm; } if (pbm->mfp != NULL) { fprintf(pbm->mfp, "\n*** Error code %d%s\n", status, ignerr ? "(ignored)" : ""); } if (gn != NULL) Global_Set(".ERROR_TARGET", GNode_Path(gn)); getcwd(cwd, sizeof cwd); Global_Set(".ERROR_CWD", cwd); if (pbm->meta_fname[0] != '\0') { Global_Set(".ERROR_META_FILE", pbm->meta_fname); } meta_job_finish(job); } void meta_job_output(Job *job, char *cp, const char *nl) { BuildMon *pbm; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } if (pbm->mfp != NULL) { if (metaVerbose) { static char *meta_prefix = NULL; static size_t meta_prefix_len; if (meta_prefix == NULL) { char *cp2; (void)Var_Subst("${" MAKE_META_PREFIX "}", SCOPE_GLOBAL, VARE_WANTRES, &meta_prefix); /* TODO: handle errors */ if ((cp2 = strchr(meta_prefix, '$')) != NULL) meta_prefix_len = (size_t)(cp2 - meta_prefix); else meta_prefix_len = strlen(meta_prefix); } if (strncmp(cp, meta_prefix, meta_prefix_len) == 0) { cp = strchr(cp + 1, '\n'); if (cp == NULL) return; cp++; } } fprintf(pbm->mfp, "%s%s", cp, nl); } } int meta_cmd_finish(void *pbmp) { int error = 0; BuildMon *pbm = pbmp; #ifdef USE_FILEMON int x; #endif if (pbm == NULL) pbm = &Mybm; #ifdef USE_FILEMON if (pbm->filemon != NULL) { while (filemon_process(pbm->filemon) > 0) continue; - if (filemon_close(pbm->filemon) == -1) + if (filemon_close(pbm->filemon) == -1) { error = errno; + Punt("filemon failed: %s", strerror(errno)); + } x = filemon_read(pbm->mfp, pbm->mon_fd); if (error == 0 && x != 0) error = x; pbm->mon_fd = -1; pbm->filemon = NULL; return error; } #endif fprintf(pbm->mfp, "\n"); /* ensure end with newline */ return error; } int meta_job_finish(Job *job) { BuildMon *pbm; int error = 0; int x; if (job != NULL) { pbm = &job->bm; } else { pbm = &Mybm; } if (pbm->mfp != NULL) { error = meta_cmd_finish(pbm); x = fclose(pbm->mfp); if (error == 0 && x != 0) error = errno; pbm->mfp = NULL; pbm->meta_fname[0] = '\0'; } return error; } void meta_finish(void) { Lst_Done(&metaBailiwick); free(metaBailiwickStr); Lst_Done(&metaIgnorePaths); free(metaIgnorePathsStr); } /* * Fetch a full line from fp - growing bufp if needed * Return length in bufp. */ static int fgetLine(char **bufp, size_t *szp, int o, FILE *fp) { char *buf = *bufp; size_t bufsz = *szp; struct stat fs; int x; if (fgets(&buf[o], (int)bufsz - o, fp) != NULL) { check_newline: x = o + (int)strlen(&buf[o]); if (buf[x - 1] == '\n') return x; /* * We need to grow the buffer. * The meta file can give us a clue. */ if (fstat(fileno(fp), &fs) == 0) { size_t newsz; char *p; newsz = ROUNDUP(((size_t)fs.st_size / 2), BUFSIZ); if (newsz <= bufsz) newsz = ROUNDUP((size_t)fs.st_size, BUFSIZ); if (newsz <= bufsz) return x; /* truncated */ DEBUG2(META, "growing buffer %u -> %u\n", (unsigned)bufsz, (unsigned)newsz); p = bmake_realloc(buf, newsz); *bufp = buf = p; *szp = bufsz = newsz; /* fetch the rest */ if (fgets(&buf[x], (int)bufsz - x, fp) == NULL) return x; /* truncated! */ goto check_newline; } } return 0; } static bool prefix_match(const char *prefix, const char *path) { size_t n = strlen(prefix); return strncmp(path, prefix, n) == 0; } static bool has_any_prefix(const char *path, StringList *prefixes) { StringListNode *ln; for (ln = prefixes->first; ln != NULL; ln = ln->next) if (prefix_match(ln->datum, path)) return true; return false; } /* See if the path equals prefix or starts with "prefix/". */ static bool path_starts_with(const char *path, const char *prefix) { size_t n = strlen(prefix); if (strncmp(path, prefix, n) != 0) return false; return path[n] == '\0' || path[n] == '/'; } static bool meta_ignore(GNode *gn, const char *p) { char fname[MAXPATHLEN]; if (p == NULL) return true; if (*p == '/') { cached_realpath(p, fname); /* clean it up */ if (has_any_prefix(fname, &metaIgnorePaths)) { #ifdef DEBUG_META_MODE DEBUG1(META, "meta_oodate: ignoring path: %s\n", p); #endif return true; } } if (metaIgnorePatterns) { const char *expr; char *pm; /* * XXX: This variable is set on a target GNode but is not one of * the usual local variables. It should be deleted afterwards. * Ideally it would not be created in the first place, just like * in a .for loop. */ Var_Set(gn, ".p.", p); expr = "${" MAKE_META_IGNORE_PATTERNS ":@m@${.p.:M$m}@}"; (void)Var_Subst(expr, gn, VARE_WANTRES, &pm); /* TODO: handle errors */ if (pm[0] != '\0') { #ifdef DEBUG_META_MODE DEBUG1(META, "meta_oodate: ignoring pattern: %s\n", p); #endif free(pm); return true; } free(pm); } if (metaIgnoreFilter) { char *fm; /* skip if filter result is empty */ snprintf(fname, sizeof fname, "${%s:L:${%s:ts:}}", p, MAKE_META_IGNORE_FILTER); (void)Var_Subst(fname, gn, VARE_WANTRES, &fm); /* TODO: handle errors */ if (*fm == '\0') { #ifdef DEBUG_META_MODE DEBUG1(META, "meta_oodate: ignoring filtered: %s\n", p); #endif free(fm); return true; } free(fm); } return false; } /* * When running with 'meta' functionality, a target can be out-of-date * if any of the references in its meta data file is more recent. * We have to track the latestdir on a per-process basis. */ #define LCWD_VNAME_FMT ".meta.%d.lcwd" #define LDIR_VNAME_FMT ".meta.%d.ldir" /* * It is possible that a .meta file is corrupted, * if we detect this we want to reproduce it. * Setting oodate true will have that effect. */ #define CHECK_VALID_META(p) if (!(p != NULL && *p != '\0')) { \ warnx("%s: %d: malformed", fname, lineno); \ oodate = true; \ continue; \ } #define DEQUOTE(p) if (*p == '\'') { \ char *ep; \ p++; \ if ((ep = strchr(p, '\'')) != NULL) \ *ep = '\0'; \ } static void append_if_new(StringList *list, const char *str) { StringListNode *ln; for (ln = list->first; ln != NULL; ln = ln->next) if (strcmp(ln->datum, str) == 0) return; Lst_Append(list, bmake_strdup(str)); } bool meta_oodate(GNode *gn, bool oodate) { static char *tmpdir = NULL; static char cwd[MAXPATHLEN]; char lcwd_vname[64]; char ldir_vname[64]; char lcwd[MAXPATHLEN]; char latestdir[MAXPATHLEN]; char fname[MAXPATHLEN]; char fname1[MAXPATHLEN]; char fname2[MAXPATHLEN]; char fname3[MAXPATHLEN]; FStr dname; const char *tname; char *p; char *link_src; char *move_target; static size_t cwdlen = 0; static size_t tmplen = 0; FILE *fp; bool needOODATE = false; StringList missingFiles; bool have_filemon = false; if (oodate) return oodate; /* we're done */ dname = Var_Value(gn, ".OBJDIR"); tname = GNode_VarTarget(gn); /* if this succeeds fname3 is realpath of dname */ if (!meta_needed(gn, dname.str, fname3, false)) goto oodate_out; dname.str = fname3; Lst_Init(&missingFiles); /* * We need to check if the target is out-of-date. This includes * checking if the expanded command has changed. This in turn * requires that all variables are set in the same way that they * would be if the target needs to be re-built. */ GNode_SetLocalVars(gn); meta_name(fname, sizeof fname, dname.str, tname, dname.str); #ifdef DEBUG_META_MODE DEBUG1(META, "meta_oodate: %s\n", fname); #endif if ((fp = fopen(fname, "r")) != NULL) { static char *buf = NULL; static size_t bufsz; int lineno = 0; int lastpid = 0; int pid; int x; StringListNode *cmdNode; struct cached_stat cst; if (buf == NULL) { bufsz = 8 * BUFSIZ; buf = bmake_malloc(bufsz); } if (cwdlen == 0) { if (getcwd(cwd, sizeof cwd) == NULL) err(1, "Could not get current working directory"); cwdlen = strlen(cwd); } strlcpy(lcwd, cwd, sizeof lcwd); strlcpy(latestdir, cwd, sizeof latestdir); if (tmpdir == NULL) { tmpdir = getTmpdir(); tmplen = strlen(tmpdir); } /* we want to track all the .meta we read */ Global_Append(".MAKE.META.FILES", fname); cmdNode = gn->commands.first; while (!oodate && (x = fgetLine(&buf, &bufsz, 0, fp)) > 0) { lineno++; if (buf[x - 1] == '\n') buf[x - 1] = '\0'; else { warnx("%s: %d: line truncated at %u", fname, lineno, x); oodate = true; break; } link_src = NULL; move_target = NULL; /* Find the start of the build monitor section. */ if (!have_filemon) { if (strncmp(buf, "-- filemon", 10) == 0) { have_filemon = true; continue; } if (strncmp(buf, "# buildmon", 10) == 0) { have_filemon = true; continue; } } /* Delimit the record type. */ p = buf; #ifdef DEBUG_META_MODE DEBUG3(META, "%s: %d: %s\n", fname, lineno, buf); #endif strsep(&p, " "); if (have_filemon) { /* * We are in the 'filemon' output section. * Each record from filemon follows the general form: * * * * Where: * is a single letter, denoting the syscall. * is the process that made the syscall. * is the arguments (of interest). */ switch(buf[0]) { case '#': /* comment */ case 'V': /* version */ break; default: /* * We need to track pathnames per-process. * * Each process run by make starts off in the 'CWD' * recorded in the .meta file, if it chdirs ('C') * elsewhere we need to track that - but only for * that process. If it forks ('F'), we initialize * the child to have the same cwd as its parent. * * We also need to track the 'latestdir' of * interest. This is usually the same as cwd, but * not if a process is reading directories. * * Each time we spot a different process ('pid') * we save the current value of 'latestdir' in a * variable qualified by 'lastpid', and * re-initialize 'latestdir' to any pre-saved * value for the current 'pid' and 'CWD' if none. */ CHECK_VALID_META(p); pid = atoi(p); if (pid > 0 && pid != lastpid) { FStr ldir; if (lastpid > 0) { /* We need to remember these. */ Global_SetExpand(lcwd_vname, lcwd); Global_SetExpand(ldir_vname, latestdir); } snprintf(lcwd_vname, sizeof lcwd_vname, LCWD_VNAME_FMT, pid); snprintf(ldir_vname, sizeof ldir_vname, LDIR_VNAME_FMT, pid); lastpid = pid; ldir = Var_Value(SCOPE_GLOBAL, ldir_vname); if (ldir.str != NULL) { strlcpy(latestdir, ldir.str, sizeof latestdir); FStr_Done(&ldir); } ldir = Var_Value(SCOPE_GLOBAL, lcwd_vname); if (ldir.str != NULL) { strlcpy(lcwd, ldir.str, sizeof lcwd); FStr_Done(&ldir); } } /* Skip past the pid. */ if (strsep(&p, " ") == NULL) continue; #ifdef DEBUG_META_MODE if (DEBUG(META)) debug_printf("%s: %d: %d: %c: cwd=%s lcwd=%s ldir=%s\n", fname, lineno, pid, buf[0], cwd, lcwd, latestdir); #endif break; } CHECK_VALID_META(p); /* Process according to record type. */ switch (buf[0]) { case 'X': /* eXit */ Var_DeleteExpand(SCOPE_GLOBAL, lcwd_vname); Var_DeleteExpand(SCOPE_GLOBAL, ldir_vname); lastpid = 0; /* no need to save ldir_vname */ break; case 'F': /* [v]Fork */ { char cldir[64]; int child; child = atoi(p); if (child > 0) { snprintf(cldir, sizeof cldir, LCWD_VNAME_FMT, child); Global_SetExpand(cldir, lcwd); snprintf(cldir, sizeof cldir, LDIR_VNAME_FMT, child); Global_SetExpand(cldir, latestdir); #ifdef DEBUG_META_MODE if (DEBUG(META)) debug_printf( "%s: %d: %d: cwd=%s lcwd=%s ldir=%s\n", fname, lineno, child, cwd, lcwd, latestdir); #endif } } break; case 'C': /* Chdir */ /* Update lcwd and latest directory. */ strlcpy(latestdir, p, sizeof latestdir); strlcpy(lcwd, p, sizeof lcwd); Global_SetExpand(lcwd_vname, lcwd); Global_SetExpand(ldir_vname, lcwd); #ifdef DEBUG_META_MODE DEBUG4(META, "%s: %d: cwd=%s ldir=%s\n", fname, lineno, cwd, lcwd); #endif break; case 'M': /* renaMe */ /* * For 'M'oves we want to check * the src as for 'R'ead * and the target as for 'W'rite. */ { char *cp = p; /* save this for a second */ /* now get target */ if (strsep(&p, " ") == NULL) continue; CHECK_VALID_META(p); move_target = p; p = cp; } /* 'L' and 'M' put single quotes around the args */ DEQUOTE(p); DEQUOTE(move_target); /* FALLTHROUGH */ case 'D': /* unlink */ if (*p == '/') { /* remove any missingFiles entries that match p */ StringListNode *ln = missingFiles.first; while (ln != NULL) { StringListNode *next = ln->next; if (path_starts_with(ln->datum, p)) { free(ln->datum); Lst_Remove(&missingFiles, ln); } ln = next; } } if (buf[0] == 'M') { /* the target of the mv is a file 'W'ritten */ #ifdef DEBUG_META_MODE DEBUG2(META, "meta_oodate: M %s -> %s\n", p, move_target); #endif p = move_target; goto check_write; } break; case 'L': /* Link */ /* * For 'L'inks check * the src as for 'R'ead * and the target as for 'W'rite. */ link_src = p; /* now get target */ if (strsep(&p, " ") == NULL) continue; CHECK_VALID_META(p); /* 'L' and 'M' put single quotes around the args */ DEQUOTE(p); DEQUOTE(link_src); #ifdef DEBUG_META_MODE DEBUG2(META, "meta_oodate: L %s -> %s\n", link_src, p); #endif /* FALLTHROUGH */ case 'W': /* Write */ check_write: /* * If a file we generated within our bailiwick * but outside of .OBJDIR is missing, * we need to do it again. */ /* ignore non-absolute paths */ if (*p != '/') break; if (Lst_IsEmpty(&metaBailiwick)) break; /* ignore cwd - normal dependencies handle those */ if (strncmp(p, cwd, cwdlen) == 0) break; if (!has_any_prefix(p, &metaBailiwick)) break; /* tmpdir might be within */ if (tmplen > 0 && strncmp(p, tmpdir, tmplen) == 0) break; /* ignore anything containing the string "tmp" */ /* XXX: The arguments to strstr must be swapped. */ if (strstr("tmp", p) != NULL) break; if ((link_src != NULL && cached_lstat(p, &cst) < 0) || (link_src == NULL && cached_stat(p, &cst) < 0)) { if (!meta_ignore(gn, p)) append_if_new(&missingFiles, p); } break; check_link_src: p = link_src; link_src = NULL; #ifdef DEBUG_META_MODE DEBUG1(META, "meta_oodate: L src %s\n", p); #endif /* FALLTHROUGH */ case 'R': /* Read */ case 'E': /* Exec */ /* * Check for runtime files that can't * be part of the dependencies because * they are _expected_ to change. */ if (meta_ignore(gn, p)) break; /* * The rest of the record is the file name. * Check if it's not an absolute path. */ { char *sdirs[4]; char **sdp; int sdx = 0; bool found = false; if (*p == '/') { sdirs[sdx++] = p; /* done */ } else { if (strcmp(".", p) == 0) continue; /* no point */ /* Check vs latestdir */ snprintf(fname1, sizeof fname1, "%s/%s", latestdir, p); sdirs[sdx++] = fname1; if (strcmp(latestdir, lcwd) != 0) { /* Check vs lcwd */ snprintf(fname2, sizeof fname2, "%s/%s", lcwd, p); sdirs[sdx++] = fname2; } if (strcmp(lcwd, cwd) != 0) { /* Check vs cwd */ snprintf(fname3, sizeof fname3, "%s/%s", cwd, p); sdirs[sdx++] = fname3; } } sdirs[sdx++] = NULL; for (sdp = sdirs; *sdp != NULL && !found; sdp++) { #ifdef DEBUG_META_MODE DEBUG3(META, "%s: %d: looking for: %s\n", fname, lineno, *sdp); #endif if (cached_stat(*sdp, &cst) == 0) { found = true; p = *sdp; } } if (found) { #ifdef DEBUG_META_MODE DEBUG3(META, "%s: %d: found: %s\n", fname, lineno, p); #endif if (!S_ISDIR(cst.cst_mode) && cst.cst_mtime > gn->mtime) { DEBUG3(META, "%s: %d: file '%s' is newer than the target...\n", fname, lineno, p); oodate = true; } else if (S_ISDIR(cst.cst_mode)) { /* Update the latest directory. */ cached_realpath(p, latestdir); } } else if (errno == ENOENT && *p == '/' && strncmp(p, cwd, cwdlen) != 0) { /* * A referenced file outside of CWD is missing. * We cannot catch every eventuality here... */ append_if_new(&missingFiles, p); } } if (buf[0] == 'E') { /* previous latestdir is no longer relevant */ strlcpy(latestdir, lcwd, sizeof latestdir); } break; default: break; } if (!oodate && buf[0] == 'L' && link_src != NULL) goto check_link_src; } else if (strcmp(buf, "CMD") == 0) { /* * Compare the current command with the one in the * meta data file. */ if (cmdNode == NULL) { DEBUG2(META, "%s: %d: there were more build commands in the meta data file than there are now...\n", fname, lineno); oodate = true; } else { const char *cp; char *cmd = cmdNode->datum; bool hasOODATE = false; if (strstr(cmd, "$?") != NULL) hasOODATE = true; else if ((cp = strstr(cmd, ".OODATE")) != NULL) { /* check for $[{(].OODATE[:)}] */ if (cp > cmd + 2 && cp[-2] == '$') hasOODATE = true; } if (hasOODATE) { needOODATE = true; DEBUG2(META, "%s: %d: cannot compare command using .OODATE\n", fname, lineno); } (void)Var_Subst(cmd, gn, VARE_UNDEFERR, &cmd); /* TODO: handle errors */ if ((cp = strchr(cmd, '\n')) != NULL) { int n; /* * This command contains newlines, we need to * fetch more from the .meta file before we * attempt a comparison. */ /* first put the newline back at buf[x - 1] */ buf[x - 1] = '\n'; do { /* now fetch the next line */ if ((n = fgetLine(&buf, &bufsz, x, fp)) <= 0) break; x = n; lineno++; if (buf[x - 1] != '\n') { warnx("%s: %d: line truncated at %u", fname, lineno, x); break; } cp = strchr(cp + 1, '\n'); } while (cp != NULL); if (buf[x - 1] == '\n') buf[x - 1] = '\0'; } if (p != NULL && !hasOODATE && !(gn->type & OP_NOMETA_CMP) && (strcmp(p, cmd) != 0)) { DEBUG4(META, "%s: %d: a build command has changed\n%s\nvs\n%s\n", fname, lineno, p, cmd); if (!metaIgnoreCMDs) oodate = true; } free(cmd); cmdNode = cmdNode->next; } } else if (strcmp(buf, "CWD") == 0) { /* * Check if there are extra commands now * that weren't in the meta data file. */ if (!oodate && cmdNode != NULL) { DEBUG2(META, "%s: %d: there are extra build commands now that weren't in the meta data file\n", fname, lineno); oodate = true; } CHECK_VALID_META(p); if (strcmp(p, cwd) != 0) { DEBUG4(META, "%s: %d: the current working directory has changed from '%s' to '%s'\n", fname, lineno, p, curdir); oodate = true; } } } fclose(fp); if (!Lst_IsEmpty(&missingFiles)) { DEBUG2(META, "%s: missing files: %s...\n", fname, (char *)missingFiles.first->datum); oodate = true; } if (!oodate && !have_filemon && filemonMissing) { DEBUG1(META, "%s: missing filemon data\n", fname); oodate = true; } } else { if (writeMeta && (metaMissing || (gn->type & OP_META))) { const char *cp = NULL; /* if target is in .CURDIR we do not need a meta file */ if (gn->path != NULL && (cp = strrchr(gn->path, '/')) != NULL && (cp > gn->path)) { if (strncmp(curdir, gn->path, (size_t)(cp - gn->path)) != 0) { cp = NULL; /* not in .CURDIR */ } } if (cp == NULL) { DEBUG1(META, "%s: required but missing\n", fname); oodate = true; needOODATE = true; /* assume the worst */ } } } Lst_DoneCall(&missingFiles, free); if (oodate && needOODATE) { /* * Target uses .OODATE which is empty; or we wouldn't be here. * We have decided it is oodate, so .OODATE needs to be set. * All we can sanely do is set it to .ALLSRC. */ Var_Delete(gn, OODATE); Var_Set(gn, OODATE, GNode_VarAllsrc(gn)); } oodate_out: FStr_Done(&dname); return oodate; } /* support for compat mode */ static int childPipe[2]; void meta_compat_start(void) { #ifdef USE_FILEMON_ONCE /* * We need to re-open filemon for each cmd. */ BuildMon *pbm = &Mybm; if (pbm->mfp != NULL && useFilemon) { meta_open_filemon(pbm); } else { pbm->mon_fd = -1; pbm->filemon = NULL; } #endif if (pipe(childPipe) < 0) Punt("Cannot create pipe: %s", strerror(errno)); /* Set close-on-exec flag for both */ (void)fcntl(childPipe[0], F_SETFD, FD_CLOEXEC); (void)fcntl(childPipe[1], F_SETFD, FD_CLOEXEC); } void meta_compat_child(void) { meta_job_child(NULL); if (dup2(childPipe[1], 1) < 0 || dup2(1, 2) < 0) execDie("dup2", "pipe"); } void meta_compat_parent(pid_t child) { int outfd, metafd, maxfd, nfds; char buf[BUFSIZ+1]; fd_set readfds; meta_job_parent(NULL, child); close(childPipe[1]); /* child side */ outfd = childPipe[0]; #ifdef USE_FILEMON metafd = Mybm.filemon != NULL ? filemon_readfd(Mybm.filemon) : -1; #else metafd = -1; #endif maxfd = -1; if (outfd > maxfd) maxfd = outfd; if (metafd > maxfd) maxfd = metafd; while (outfd != -1 || metafd != -1) { FD_ZERO(&readfds); if (outfd != -1) { FD_SET(outfd, &readfds); } if (metafd != -1) { FD_SET(metafd, &readfds); } nfds = select(maxfd + 1, &readfds, NULL, NULL, NULL); if (nfds == -1) { if (errno == EINTR) continue; err(1, "select"); } if (outfd != -1 && FD_ISSET(outfd, &readfds) != 0) do { /* XXX this is not line-buffered */ ssize_t nread = read(outfd, buf, sizeof buf - 1); if (nread == -1) err(1, "read"); if (nread == 0) { close(outfd); outfd = -1; break; } fwrite(buf, 1, (size_t)nread, stdout); fflush(stdout); buf[nread] = '\0'; meta_job_output(NULL, buf, ""); - } while (/*CONSTCOND*/false); + } while (false); if (metafd != -1 && FD_ISSET(metafd, &readfds) != 0) { if (meta_job_event(NULL) <= 0) metafd = -1; } } } #endif /* USE_META */ diff --git a/contrib/bmake/metachar.c b/contrib/bmake/metachar.c index dcb049dff44d..e99630602e3d 100644 --- a/contrib/bmake/metachar.c +++ b/contrib/bmake/metachar.c @@ -1,84 +1,84 @@ -/* $NetBSD: metachar.c,v 1.9 2021/01/19 20:51:46 rillig Exp $ */ +/* $NetBSD: metachar.c,v 1.10 2021/06/21 18:54:41 rillig Exp $ */ /* * Copyright (c) 2015 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Christos Zoulas. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #if HAVE_NBTOOL_CONFIG_H #include "nbtool_config.h" #endif #if defined(MAKE_NATIVE) || defined(HAVE_NBTOOL_CONFIG_H) #include #endif #include "metachar.h" -MAKE_RCSID("$NetBSD: metachar.c,v 1.9 2021/01/19 20:51:46 rillig Exp $"); +MAKE_RCSID("$NetBSD: metachar.c,v 1.10 2021/06/21 18:54:41 rillig Exp $"); /* * The following array is used to make a fast determination of which * characters are interpreted specially by the shell. If a command * contains any of these characters, it is executed by the shell, not * directly by us. */ -unsigned char _metachar[128] = { +const unsigned char _metachar[128] = { /* nul soh stx etx eot enq ack bel */ 1, 0, 0, 0, 0, 0, 0, 0, /* bs ht nl vt np cr so si */ 0, 0, 1, 0, 0, 0, 0, 0, /* dle dc1 dc2 dc3 dc4 nak syn etb */ 0, 0, 0, 0, 0, 0, 0, 0, /* can em sub esc fs gs rs us */ 0, 0, 0, 0, 0, 0, 0, 0, /* sp ! " # $ % & ' */ 0, 1, 1, 1, 1, 0, 1, 1, /* ( ) * + , - . / */ 1, 1, 1, 0, 0, 0, 0, 0, /* 0 1 2 3 4 5 6 7 */ 0, 0, 0, 0, 0, 0, 0, 0, /* 8 9 : ; < = > ? */ 0, 0, 0, 1, 1, 0, 1, 1, /* @ A B C D E F G */ 0, 0, 0, 0, 0, 0, 0, 0, /* H I J K L M N O */ 0, 0, 0, 0, 0, 0, 0, 0, /* P Q R S T U V W */ 0, 0, 0, 0, 0, 0, 0, 0, /* X Y Z [ \ ] ^ _ */ 0, 0, 0, 1, 1, 1, 1, 0, /* ` a b c d e f g */ 1, 0, 0, 0, 0, 0, 0, 0, /* h i j k l m n o */ 0, 0, 0, 0, 0, 0, 0, 0, /* p q r s t u v w */ 0, 0, 0, 0, 0, 0, 0, 0, /* x y z { | } ~ del */ 0, 0, 0, 1, 1, 1, 1, 0, }; diff --git a/contrib/bmake/metachar.h b/contrib/bmake/metachar.h index 1fd1397cfe63..d6fd2299d43e 100644 --- a/contrib/bmake/metachar.h +++ b/contrib/bmake/metachar.h @@ -1,48 +1,52 @@ -/* $NetBSD: metachar.h,v 1.16 2021/04/03 11:08:40 rillig Exp $ */ +/* $NetBSD: metachar.h,v 1.17 2021/06/21 18:54:41 rillig Exp $ */ /* * Copyright (c) 2015 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Christos Zoulas. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef MAKE_METACHAR_H #define MAKE_METACHAR_H #include "make.h" -extern unsigned char _metachar[]; +extern const unsigned char _metachar[]; -#define is_shell_metachar(c) (_metachar[(c) & 0x7f] != 0) +MAKE_INLINE bool +is_shell_metachar(char c) +{ + return _metachar[c & 0x7f] != 0; +} MAKE_INLINE bool needshell(const char *cmd) { while (!is_shell_metachar(*cmd) && *cmd != ':' && *cmd != '=') cmd++; return *cmd != '\0'; } #endif /* MAKE_METACHAR_H */ diff --git a/contrib/bmake/mk/ChangeLog b/contrib/bmake/mk/ChangeLog index f73c4fb68c6b..93bde20d754d 100644 --- a/contrib/bmake/mk/ChangeLog +++ b/contrib/bmake/mk/ChangeLog @@ -1,1799 +1,1903 @@ +2021-12-12 Simon J Gerraty + + * sys.mk: simplify; include meta.sys.mk if MK_META_MODE is yes. + + * meta.sys.mk: do not check for /dev/filemon if .MAKE.PATH_FILEMON + is something else. + + * meta.autodep.mk: we can now reference ${.SUFFIXES} + + * meta2deps.py: derive a list of dirdep extensions from + TARGET_SPEC to trim from dirdeps. + + * dirdeps.mk: flip the computation of qualified vs unqualified + dirdeps - it is much simpler to check for unqualified first. + +2021-12-11 Simon J Gerraty + + * install-mk (MK_VERSION): 20211212 + + * auto.dep.mk: rearrange so that the trivial implementation + for recent bmake is more obvious. + +2021-12-07 Simon J Gerraty + + * install-mk (MK_VERSION): 20211207 + + * Ensure guard targets are .NOTMAIN + + * meta.sys.mk: check for nofilemon support when we skip level 0 + + * auto.dep.mk: make this usable in meta mode + for platforms that cannot use meta.autodep.mk + + * meta2deps.py: avoid confusion if MACHINE and another + TARGET_SPEC_VAR have same value. + +2021-11-27 Simon J Gerraty + + * dirdeps.mk: when building dirdeps.cache, minimize the amount of + data put into env, by stripping ${SRCTOP}/ from each entry. + A long sandbox name can double the amount of memory consumed and + in extreme cases cause failure. + While we are at it, strip ${SRCTOP}/ from a lot of the debug output. + +2021-11-11 Simon J Gerraty + + * install-mk (MK_VERSION): 20211111 + + * meta.stage.mk (LN_CP_SCRIPT): if staging to NFS cp -p can fail + so fallback to cp if necessary. + +2021-10-30 Simon J Gerraty + + * man.mk (CMT2DOC): use cmt2doc.py rather than the 30 year + old cmt2doc.pl + +2021-10-24 Simon J Gerraty + + * meta.stage.mk: stage_as_and_symlink use ${STAGE_LINK_AS_$f:U$f} + as the symlink (rare) + +2021-10-16 Simon J Gerraty + + * autoconf.mk: if AUTOCONF_GENERATED_MAKEFILE is set and has not + been read, throw an error after running configure telling user to + restart. + +2021-10-13 Simon J Gerraty + + * install-mk (MK_VERSION): 20211011 + + * Add support for SCO_SV + +2021-10-01 Simon J Gerraty + + * install-mk (MK_VERSION): 20211001 + + * man.mk: use MAN_SUFFIXES and CMT2DOC_SUFFIXES for more + flexibility + +2021-09-13 Simon J Gerraty + + * options.mk (describe-options): print options and their values + and optional description + +2021-09-11 Simon J Gerraty + + * install-mk (MK_VERSION): 20210911 + + * options.mk (show-options): print options and their values + +2021-09-08 Simon J Gerraty + + * install-mk (MK_VERSION): 20210909 + + * lib.mk: apply patch from + to fix shared libs on Linux + +2021-08-08 Simon J Gerraty + + * install-mk (MK_VERSION): 20210808 + + * options.mk: issue warning for WITH_*=no + 2021-06-16 Simon J Gerraty * install-mk (MK_VERSION): 20210616 * dirdeps.mk: when using .MAKE.DEPENDFILE_PREFERENCE to find depend files to read, anchor MACHINE at , or end of string to avoid prefix match. 2021-05-04 Simon J Gerraty * install-mk (MK_VERSION): 20210504 * dirdeps.mk: re-implement ALL_MACHINES support to better cater for local complexities, when ONLY_TARGET_SPEC_LIST is not set. local.dirdeps.mk can set DIRDEPS_ALL_MACHINES_FILTER and/or DIRDEPS_ALL_MACHINES_FILTER_XTRAS to filter the results we get from listing all existing Makefile.depend.* 2021-04-20 Simon J Gerraty * install-mk (MK_VERSION): 20210420 * dirdeps.mk: revert previous - not always safe. 2021-03-20 Simon J Gerraty * install-mk (MK_VERSION): 20210321 * dirdeps.mk: when generating dirdeps.cache we only need to hook the initial DIRDEPS to the dirdeps target. That and any _build_xtra_dirs (like tests which should not be hooked directly to the dependency graph - to avoid cycles) 2021-01-30 Simon J Gerraty * install-mk (MK_VERSION): 20210130 * dirdeps.mk: expr 2 - 1 - 1 exits with a bad status we need to guard against this in DIRDEP_LOADAVG_REPORT. * dirdeps.mk: restore respect for TARGET_MACHINE 2021-01-06 Simon J Gerraty * install-mk (MK_VERSION): 20210101 * dirdeps.mk: first time we are read, just use TARGET_SPEC for _DEP_TARGET_SPEC 2020-12-22 Simon J Gerraty * sys.mk (MAKE_SHELL): use ${.SHELL:Ush} and use := when setting SHELL 2020-12-21 Simon J Gerraty * install-mk (MK_VERSION): 20201221 * dirdeps-options.mk: latest bmake allows only one arg to .undef 2020-12-11 Simon J Gerraty * dirdeps-targets.mk: allow for "." in DIRDEPS_TARGETS_DIRS so that any directory can be treated as a target. 2020-11-26 Simon J Gerraty * install-mk (MK_VERSION): 20201126 * own.mk: use .MAKE.{UID,GID} if available. * init.mk: suppress _SKIP_BUILD warning if doing -V 2020-11-20 Simon J Gerraty * install-mk (MK_VERSION): 20201120 * init.mk: rename LEVEL0_TARGETS to DIRDEPS_BUILD_LEVEL0_TARGETS * dirdeps-targets.mk: fix typo in comment 2020-11-06 Simon J Gerraty * install-mk (MK_VERSION): 20201106 * meta.autodep.mk: use OBJ_EXTENSIONS rather than hardcode sed args to tweak extensions for local deps. 2020-11-01 Simon J Gerraty * install-mk (MK_VERSION): 20201101 * dirdeps.mk: most leaf makefiles are not suitable for building dirdeps.cache so if RELDIR is not "." use dirdeps.mk 2020-10-28 Simon J Gerraty * install-mk (MK_VERSION): 20201028 * dirdeps.mk: if we don't have :range use equivalent of M_RANGE when building dirdeps.cache for leaf directory use -f dirdeps.mk * sys.vars.mk: add M_JOT and M_RANGE 2020-10-01 Simon J Gerraty * install-mk (MK_VERSION): 20201001 * meta2deps.{py,sh}: throw an error if we don't see filemon version 2020-09-09 Simon J Gerraty * install-mk (MK_VERSION): 20200909 * dirdeps-cache-update.mk: use cache_update_dirdep as guard target 2020-08-26 Simon J Gerraty * dirdeps.mk: ensure we cannot confuse a static cache for dynamic (even more rare that use of static cache is playing clever tricks with it) 2020-08-16 Simon J Gerraty * dirdeps-cache-update.mk: allow MK_STATIC_DIRDEPS_CACHE_UPDATE_IMMEDIATE to control when we actually update STATIC_DIRDEPS_CACHE. * stage-install.sh: create dest directory if needed before running install(1) 2020-08-10 Simon J Gerraty * dirdeps-targets.mk: include Makefile.dirdeps.options * dirdeps.mk: use _TARGETS if defined for DIRDEPS_CACHE 2020-08-09 Simon J Gerraty * dirdeps.mk: default BUILD_DIRDEPS_MAKEFILE to empty * dirdeps-cache-update.mk: building parallel cache update under the context of dirdeps-cached would be ideal, but is problematic, so it runs as a sibling. Use cache-built target to ensure we wait for it to complete if necessary. 2020-08-06 Simon J Gerraty * install-mk (MK_VERSION): 20200806 * dirdeps-options: allow TARGET_SPEC to affect option values. Use DIRDEPS_OPTIONS_QUALIFIER_LIST before using bare MK_* * dirdeps-targets.mk: check for MK_STATIC_DIRDEPS_CACHE defined before looking for STATIC_DIRDEPS_CACHE 2020-08-05 Simon J Gerraty * host-target.mk: Darwin use MACHINE for HOST_ARCH too * dirdeps-options.mk: improve debug output 2020-07-22 Simon J Gerraty * dirdeps.mk: set and export DYNAMIC_DIRDEPS_CACHE for use by dirdeps-cache-update.mk * dirdeps-targets.mk: set and export STATIC_DIRDEPS_CACHE for use by dirdeps-cache-update.mk even if we don't use it. * dirdeps-cache-update.mk: we only need worry about the background update case, with the above, the update from DIRDEPS_CACHE is simple. * meta2deps.py: R 1234 . is not interesting 2020-07-20 Simon J Gerraty * sys.mk: default MK_STATIC_DIRDEPS_CACHE from MK_DIRDEPS_CACHE * dirdeps-options.mk: do not :tu DIRDEPS_OPTIONS allows use of lower case for pseudo options. * dirdeps-cache-update.mk: magic to deal with STATIC_DIRDEPS_CACHE 2020-07-18 Simon J Gerraty * dirdeps-targets.mk: Look for Makefile.dirdeps.cache which allows us to have a static cache for expensive targets. Use -DWITHOUT_STATIC_DIRDEPS_CACHE -DWITH_DIRDEPS_CACHE to regenerate the dirdeps.cache it is a copy of. 2020-07-17 Simon J Gerraty * Get rid of BUILD_AT_LEVEL0, MK_DIRDEPS_BUILD makes more sense. 2020-07-16 Simon J Gerraty * dirdeps.mk (DIRDEP_LOADAVG_REPORT): make it easy to record load averages at intervals during build. 2020-07-15 Simon J Gerraty * install-mk (MK_VERSION): 20200715 * dirdeps.mk: tweak Checking line to make matching Finished lines for post-build analysis easier. * meta.autodep.mk: use !defined(WITHOUT_META_STATS) * progs.mk: avoid prog.mk outputting multiple Finished lines 2020-07-11 Simon J Gerraty * dirdeps.mk: further optimize dirdeps.cache generate a DIRDEPS.${.TARGET} list for other purposes and improve the layout. 2020-07-10 Simon J Gerraty * dirdeps.mk: optimize content of dirdeps.cache 2020-06-28 Simon J Gerraty * sys/*.mk: make it easier for local*sys.mk to customize by using ?= 2020-06-22 Simon J Gerraty * gendirdeps.mk (LOCAL_DEPENDS_GUARD): if we don't build at level 0 it is much safer to guard local depends with a simple check for .MAKE.LEVEL > 0 2020-06-10 Simon J Gerraty * install-mk (MK_VERSION): 20200610 * mkopt.sh: this needs posix shell so #!/bin/sh should be ok 2020-06-06 Simon J Gerraty * install-mk (MK_VERSION): 20200606 * dirdeps-targets.mk: allow for filtering of .TARGETS * meta2deps.py: fix bug in processing 'L'ink and 'M'ove entries - and we don't care about 'W'rite entries. Also ignore absolute paths that do not exist. 2020-05-25 Simon J Gerraty * install-mk (MK_VERSION): 20200525 * init.mk: expand and simplify handling of qualified vars like CPPFLAGS.${.TARGET:T} 2020-05-15 Simon J Gerraty * install-mk (MK_VERSION): 20200515 * dirdeps.mk: set _debug_* earlier and allow passing -d* flags to submake when building DIRDEPS_CACHE 2020-05-09 Simon J Gerraty * whats.mk: more easily extensible 2020-05-02 Simon J Gerraty * whats.mk: greatly simplify by adding what.c to SRCS 2020-05-01 Simon J Gerraty * whats.mk: for libs take care how we add to *OBJS * lib.mk: : works better with whats.mk 2020-04-25 Simon J Gerraty * install-mk (MK_VERSION): 20200420 * meta.stage.mk: it is not a STAGE_CONFLICT if some-target.dirdep contains the same ${RELDIR} and a prefix match for our ${TARGET_SPEC} 2020-04-16 Simon J Gerraty * install-mk (MK_VERSION): 20200416 * sys/*.mk: set MAKE_SHELL rather than SHELL so as not to interfere with user env. * sys.mk: default MAKE_SHELL to sh and SHELL to MAKE_SHELL * autodep.mk: use MAKE_SHELL. 2019-11-21 Simon J Gerraty * gendirdeps.mk: clear .SUFFIXES to avoid a lot of wasted effort, and unexport _meta_files when no longer needed as it consumes space we need for command line. 2019-11-11 Simon J Gerraty * dirdeps.mk _DIRDEP_USE: use DIRDEP_DIR and add DIRDEP_USE_PRELUDE at start - facilitates job distribution 2019-10-04 Simon J Gerraty * dirdeps-targets.mk: Use TARGET_SPEC_LAST_LIST defaults to ${${TARGET_SPEC_VARS:[-1]}_LIST} to match valid TARGET_SPEC qualified depend files. 2019-10-02 Simon J Gerraty * dirdeps-targets.mk: encapsulate logic for finding top-level targets to set initial DIRDEPS for DIRDEPS_BUILD 2019-09-27 Simon J Gerraty * install-mk (MK_VERSION): 20190911 * compiler.mk: set COMPILER_TYPE 2019-07-17 Simon J Gerraty * install-mk (MK_VERSION): 20190704 * sys/Darwin.mk: support for Objective-C and clang 2019-05-30 Simon J Gerraty * dirdeps.mk: avoid insanely long command line when generating cache 2019-05-23 Simon J Gerraty * install-mk (MK_VERSION): 20190505 * whats.mk: handle corner case SHLIB defined but not LIB 2018-09-19 Simon J Gerraty * install-mk (MK_VERSION): 20180919 * dirdeps-options.mk: .undef cannot handle var that expands to more than one var. 2018-07-08 Simon J Gerraty * meta.stage.mk: allow wildcards in STAGE_FILES.* etc. 2018-06-01 Simon J Gerraty * meta.autodep.mk: export META_FILES to avoid command line limit * gendirdeps.mk: if we have lots of .meta files put them in an @list 2018-05-28 Simon J Gerraty * dirdeps-options.mk: use local.dirdeps-options.mk not local.dirdeps-option.mk 2018-04-20 Simon J Gerraty * install-mk (MK_VERSION): 20180420 * dirdeps.mk: include local.dirdeps-build.mk when .MAKE.LEVEL > 0 ie. we are building something. 2018-04-14 Simon J Gerraty * FILES: add dirdeps-options.mk to deal with optional DIRDEPS. 2018-04-05 Simon J Gerraty * install-mk (MK_VERSION): 20180405 * ldorder.mk: describe how to use LDORDER_EXTERN_BARRIER if needed. 2018-01-18 Simon J Gerraty * install-mk (MK_VERSION): 20180118 * ldorder.mk: let make compute correct link order 2017-12-12 Simon J Gerraty * install-mk (MK_VERSION): 20171212 * gendirdeps.mk: guard against bogus entries in GENDIRDEPS_FILTER 2017-11-14 Simon J. Gerraty * install-mk (MK_VERSION): 20171111 * lib.mk: ensure META_NOECHO is set 2017-10-25 Simon J. Gerraty * Allow for host32 on rare occasions. 2017-10-18 Simon J. Gerraty * install-mk (MK_VERSION): 20171018 * whats.mk: include what_thing in what_uuid to avoid problem when building multiple apps in the same directory. 2017-08-12 Simon J. Gerraty * install-mk (MK_VERSION): 20170812 * autoconf.mk: Use CONFIGURE_DEPS so Makefile can add dependencies for config.recheck and config.gen 2017-06-30 Simon J. Gerraty * install-mk (MK_VERSION): 20170630 * meta.stage.mk: avoid triggering stage_* targets with nothing to do. 2017-05-23 Simon J. Gerraty * meta2deps.py: take special care of '..' 2017-05-15 Simon J. Gerraty * install-mk (MK_VERSION): 20170515 * dirdeps.mk (DEP_EXPORT_VARS): on rare occasions it is useful/necessary for a Makefile.depend file to export some knobs. This is complicated when we are doing DIRDEPS_CACHE, so we will handle export of any variables listed in DEP_EXPORT_VARS. 2017-05-08 Simon J. Gerraty * install-mk (MK_VERSION): 20170505 * meta2deps.py: fix botched indenation. 2017-05-05 Simon J. Gerraty * sys/*.mk: Remove setting of MAKE it is unnecessary and in many cases wrong (basname rather than full path) * scripts.mk (SCRIPTSGROUPS): make this more like files.mk and inc.mk * init.mk: define realbuild to simplify logic in {lib,prog}.mk etc 2017-05-01 Simon J. Gerraty * install-mk (MK_VERSION): 20170501 * doc.mk: fix typo in DOC_INSTALL_OWN * inc.mk: handle INCGROUPS similar to freebsd * files.mk: add something for files too * add staging logic to lib.mk prog.mk etc. 2017-04-24 Simon J. Gerraty * install-mk (MK_VERSION): 20170424 * dirdeps.mk: set NO_DIRDEPS when bootstrapping. also target of bootstrap-this when sed is needed should be ${_want:T} 2017-04-18 Simon J. Gerraty * install-mk (MK_VERSION): 20170418 * auto.obj.mk: if using MAKEOBJDIRPREFIX check if it is a prefix match for .CURDIR - in which case .CURDIR *is* __objdir. 2017-04-01 Simon J. Gerraty * install-mk (MK_VERSION): 20170401 * meta2deps.py: add is_src so we can check if obj dependency is also a src dependency. 2017-03-26 Simon J. Gerraty * install-mk (MK_VERSION): 20170326 * meta.stage.mk: do nothing if NO_STAGING is defined. 2017-03-24 Simon J. Gerraty * auto.obj.mk: handle the case of __objdir=obj or obj.${MACHINE} etc. 2017-03-18 Simon J. Gerraty * mkopt.sh: treat WITH_*=NO like no; ie. WITHOUT_* 2017-03-01 Simon J. Gerraty * install-mk (MK_VERSION): 20170301 * dirdeps.mk (_build_all_dirs): update this outside test for empty DIRDEPS. * meta.stage.mk: allow multiple inclusion to the extent it makes sense. 2017-02-14 Simon J. Gerraty * prog.mk (install_links): depends on realinstall 2017-02-12 Simon J. Gerraty * install-mk (MK_VERSION): 20170212 * dpadd.mk: avoid applying :T:R twice to DPLIBS entries 2017-01-30 Simon J. Gerraty * install-mk (MK_VERSION): 20170130 * dirdeps.mk: use :range if we can. * sys.vars.mk: provide M_cmpv if MAKE_VERSION >= 20170130 * meta2deps.py: clean paths without using realpath() where possible. fix sort_unique. 2016-12-12 Simon J. Gerraty * install-mk (MK_VERSION): 20161212 * meta2deps.py: set pid_cwd[pid] when we process 'C'hdir, rather than when we detect pid change. 2016-12-07 Simon J. Gerraty * install-mk (MK_VERSION): 20161207 * meta.stage.mk: add stage_as_and_symlink for staging packages. We build foo.tgz stage_as foo-${VERSION}.tgz but want to be able to use foo.tgz to reference the latest staged version - so we make foo.tgz a symlink to it. Using a target to do both operations ensures we stay in sync. 2016-11-26 Simon J. Gerraty * install-mk (MK_VERSION): 20161126 * dirdeps.mk: set DIRDEPS_CACHE before we include local.dirdeps.mk so it can add dependencies. 2016-10-10 Simon J. Gerraty * dirdeps.mk: set DEP_* before we expand .MAKE.DEPENDFILE_PREFERENCE do that they can influence the result correctly. * dirdeps.mk (${DIRDEPS_CACHE}): make sure we pass on TARGET_SPEC * dirdeps.mk: Add ONLY_TARGET_SPEC_LIST and NOT_TARGET_SPEC_LIST similar to ONLY_MACHINE_LIST and NOT_MACHINE_LIST 2016-10-05 Simon J. Gerraty * dirdeps.mk: remove dependence on jot (normal situations anyway). Before we read another Makefile.depend* set DEP_* vars from _DEP_TARGET_SPEC in case it uses any of them with := When bootstrapping, trim any ,* from extention of chosen _src Makefile.depend* to get the machine value we subst for. 2016-09-30 Simon J. Gerraty * dirdeps.mk: use TARGET_SPEC_VARS to qualify components added to DEP_SKIP_DIR and DEP_DIRDEPS_FILTER * sys.mk: extract some bits to sys.{debug,vars}.mk for easier re-use by others. 2016-09-23 Simon Gerraty * lib.mk: Use ${PICO} for extension for PIC objects. default to .pico (like NetBSD) safe on case insensitive filesystem. 2016-08-19 Simon J. Gerraty * meta.sys.mk (META_COOKIE_TOUCH): use ${.OBJDIR}/${.TARGET:T} as default 2016-08-15 Simon J. Gerraty * install-mk (MK_VERSION): 20160815 * dirdeps.mk (.MAKE.META.IGNORE_FILTER): set filter to only consider Makefile.depend* when checking if DIRDEPS_CACHE is up-to-date. 2016-08-13 Simon J. Gerraty * meta.sys.mk (.MAKE.META.IGNORE_PATHS): in meta mode we can ignore the mtime of makefiles 2016-08-02 Simon J. Gerraty * install-mk (MK_VERSION): 20160802 * lib.mk (libinstall): depends on beforinstall * prog.mk (proginstall): depends on beforinstall patch from Lauri Tirkkonen * dirdeps.mk (bootstrap): When bootstrapping; creat .MAKE.DEPENDFILE_DEFAULT and allow additional filtering via .MAKE.DEPENDFILE_BOOTSTRAP_SED * dirdeps.mk: move some comments to where they make sense. 2016-07-27 Simon J. Gerraty * dirdeps.mk (DIRDEPS_CACHE): no dirname. 2016-06-02 Simon J. Gerraty * install-mk (MK_VERSION): 20160602 * meta.autodep.mk: when passing META_FILES to gendirdeps.mk do not apply :T to META_XTRAS patch from Bryan Drewery at FreeBSD.org. 2016-05-30 Simon J. Gerraty * install-mk (MK_VERSION): 20160530 * meta.stage.mk: we assume ${CLEANFILES} gets .NOPATH make it so. 2016-05-12 Simon J. Gerraty * install-mk (MK_VERSION): 20160512 * dpadd.mk: always include local.dpadd.mk if it exists remove some things that better belong in local.dpadd.mk skip INCLUDES_* for staged libs unless SRC_* defined. * own.mk: add INCLUDEDIR 2016-04-18 Simon J. Gerraty * dirdeps.mk: when doing -f dirdeps.mk if target suppies no TARGET_MACHINE - :E will be empty or match part of path, use ${MACHINE} 2016-04-07 Simon J. Gerraty * meta.autodep.mk: issue a warning if UPDATE_DEPENDFILE=NO due to NO_FILEMON_COOKIE * dirdeps.mk: move the logic that allows for make -f dirdeps.mk some/dir.${TARGET_SPEC} inside the check for !target(_DIRDEP_USE) 2016-04-04 Simon J. Gerraty * Use <> when including local*.mk and others which may exist elsewhere so that user can better control what they get. * meta.autodep.mk (NO_FILEMON_COOKIE): create a cookie if we ever build dir with nofilemon so that UPDATE_DEPENDFILE will be forced to NO until cleaned. 2016-04-01 Simon J. Gerraty * install-mk (MK_VERSION): 20160401 * meta2deps.py: fix old print statement when debugging. * gendirdeps.mk: META2DEPS_CMD append M2D_EXCLUDES with -X patch from Bryan Drewery 2016-03-22 Simon J. Gerraty * install-mk (MK_VERSION): 20160317 (St. Pats) * warnings.mk: g++ does not like -Wimplicit * sys.mk sys/*.mk lib.mk prog.mk: use CXX_SUFFIXES to handle the pelthora of common suffixes for C++ * lib.mk: use .So for shared objects 2016-03-15 Simon J. Gerraty * install-mk (MK_VERSION): 20160315 * meta.stage.mk (LN_CP_SCRIPT): do not ln(1) if we have to chmod(1) normally only applies to scripts. * dirdeps.mk: NO_DIRDEPS_BELOW to supress DIRDEPS below RELDIR as well as outside it. 2016-03-10 Simon J. Gerraty * install-mk (MK_VERSION): 20160310 * dirdeps.mk: use targets rather than a list to track DIRDEPS that we have processed; the list gets very inefficient as number of DIRDEPS gets large. * sys.dependfile.mk: fix comment wrt MACHINE * meta.autodep.mk: ignore staged DPADDs when bootstrapping. patch from Bryan Drewery 2016-03-02 Simon J. Gerraty * meta2deps.sh: don't ignore subdirs. patch from Bryan Drewery 2016-02-26 Simon J. Gerraty * install-mk (MK_VERSION): 20160226 * gendirdeps.mk: mark _DEPENDFILE .NOMETA 2016-02-20 Simon J. Gerraty * dirdeps.mk: we shouldn't normally include .depend but if we do use .dinclude if we can. 2016-02-18 Simon J. Gerraty * install-mk (MK_VERSION): 20160218 * sys.clean-env.mk: with recent change to Var_Subst() we cannot use the '$$' trick, but .export-literal does the job we need. * auto.dep.mk: make use .dinclude if we can. 2016-02-05 Simon J. Gerraty * dirdeps.mk: Add _build_all_dirs such that local.dirdeps.mk can add fully qualified dirs to it. These will be built normally but the current DEP_RELDIR will not depend on then (to avoid cycles). This makes it easy to hook things like unit-tests into build. 2016-01-21 Simon J. Gerraty * dirdeps.mk: add bootstrap-empty 2015-12-12 Simon J. Gerraty * install-mk (MK_VERSION): 20151212 * auto.obj.mk: do not require MAKEOBJDIRPREFIX to exist. only apply :tA to __objdir when comparing to .OBJDIR 2015-11-14 Simon J. Gerraty * install-mk (MK_VERSION): 20151111 * meta.sys.mk: include sys.dependfile.mk * sys.mk (OPTIONS_DEFAULT_NO): use options.mk to set MK_AUTO_OBJ and MK_DIRDEPS_BUILD include local.sys.env.mk early include local.sys.mk later * own.mk (OPTIONS_DEFAULT_NO): AUTO_OBJ etc moved to sys.mk 2015-11-13 Simon J. Gerraty * meta.sys.mk (META_COOKIE_TOUCH): add ${META_COOKIE_TOUCH} to the end of scripts to touch cookie * meta.stage.mk: stage_libs should ignore SYMLINKS. 2015-10-23 Simon J. Gerraty * install-mk (MK_VERSION): 20151022 * sys.mk: BSD/OS does not have 'type' as a shell builtin. 2015-10-20 Simon J. Gerraty * install-mk (MK_VERSION): 20151020 * dirdeps.mk: Add logic for make -f dirdeps.mk some/dir.${TARGET_SPEC} 2015-10-14 Simon J. Gerraty * install-mk (MK_VERSION): 20151010 2015-10-02 Simon J. Gerraty * meta.stage.mk: use staging: ${STAGE_TARGETS:... to have stage_lins run last in non-jobs mode. Use .ORDER only for jobs mode. 2015-09-02 Simon J. Gerraty * rst2htm.mk: allow for per target flags etc. 2015-09-01 Simon J. Gerraty * install-mk (MK_VERSION): 20150901 * doc.mk: create dir if needed use DOC_INSTALL_OWN 2015-06-15 Simon J. Gerraty * install-mk (MK_VERSION): 20150615 * auto.obj.mk: allow use of MAKEOBJDIRPREFIX too. Follow make's normal precedence rules. * gendirdeps.mk: allow customization of the header. eg. for FreeBSD: GENDIRDEPS_HEADER= echo '\# ${FreeBSD:L:@v@$$$v$$ @:M*F*}'; * meta.autodep.mk: ignore dirdeps.cache* * meta.stage.mk: when bootstrapping options it can be handy to throw warnings rather than errors for staging conflicts. * meta.sys.mk: include local.meta.sys.mk for customization 2015-06-06 Simon J. Gerraty * install-mk (MK_VERSION): 20150606 * dirdeps.mk: don't rely on manually maintained Makefile.depend to set DEP_RELDIR and reset DIRDEPS. By setting DEP_RELDIR ourselves we can skip :tA * gendirdeps.mk: skip setting DEP_RELDIR. 2015-05-24 Simon J. Gerraty * dirdeps.mk: avoid wildcards like make(bootstrap*) 2015-05-20 Simon J. Gerraty * install-mk (MK_VERSION): 20150520 * dirdeps.mk: when we are building dirdeps cache file we *want* meta_oodate to look at all the Makefile.depend files, so set .MAKE.DEPENDFILE to something that won't match. * meta.stage.mk: for STAGE_AS_* basename of file may not be unique so first use absolute path as key. Also skip staging at level 0. 2015-04-30 Simon J. Gerraty * install-mk (MK_VERSION): 20150430 * dirdeps.mk: fix _count_dirdeps for non-cache case. 2015-04-16 Simon J. Gerraty * install-mk (MK_VERSION): 20150411 bump version * own.mk: put AUTO_OBJ in OPTIONS_DEFAULT_NO rather than YES. it is here mainly for documentation purposes, since if using auto.obj.mk it is better done via sys.mk 2015-04-01 Simon J. Gerraty * install-mk (MK_VERSION): 20150401 * meta2deps.sh: support @list * meta2deps.py: updates from Juniper o add EXCLUDES o skip bogus input files. o treat 'M' and 'L' as both an 'R' and a 'W' 2015-03-03 Simon J. Gerraty * install-mk (MK_VERSION): 20150303 * dirdeps.mk: if MK_DIRDEPS_CACHE is yes, use dirdeps-cache which is built via sub-make so we have a .meta file to tell if it is out-of-date. The dirdeps-cache contains the same dependency rules that we normaly construct on the fly. This adds a few seconds overhead when the cache is out of date, but for a large target, the savings can be significant (10-20min). 2014-11-18 Simon J. Gerraty * install-mk (MK_VERSION): 20141118 * meta.stage.mk: add stale_staged * dirdeps.mk (_DIRDEP_USE_LEVEL): allow this to be tweaked only useful under very rare conditions such as FreeBSD's make universe. * auto.obj.mk: Allow MK_AUTO_OBJ to set MKOBJDIRS=auto 2014-11-11 Simon J. Gerraty * install-mk (MK_VERSION): 20141111 * mkopt.sh: use consistent semantics for _mk_opt and _mk_opts 2014-11-09 Simon J. Gerraty * FILES: include mkopt.sh which allows handling options in shell scripts in a manner compatible with options.mk 2014-10-12 Simon J. Gerraty * meta.stage.mk: ensure only _STAGED_DIRS under objroot are used for GENDIRDEPS_FILTER to avoid surprises. 2014-10-10 Simon J. Gerraty * dirdeps.mk (NSkipHostDir): this needs SRCTOP prepended since by the time it is applied to __depdirs they have. * dirdeps.mk fix filtering of _machines since M_dep_qual_fixes expects patterns like *.${MACHINE} * cython.mk (pyprefix?): use pyprefix to find python bits since prefix might be something else (where we install our stuff) 2014-09-11 Simon J. Gerraty * install-mk (MK_VERSION): 20140911 * dirdeps.mk: add bootstrap target to simplify adding support for new MACHINE. 2014-09-01 Simon J. Gerraty * gendirdeps.mk: Add handling of GENDIRDEPS_FILTER_DIR_VARS and GENDIRDEPS_FILTER_VARS to make it easier to produce sharable Makefile.depend files. 2014-08-28 Simon J. Gerraty * install-mk (MK_VERSION): 20140828 * cython.mk: capture logic for building python extension modules with Cython. 2014-08-08 Simon J. Gerraty * meta.stage.mk (_STAGE_AS_BASENAME_USE): Add StageAs variant 2014-08-02 Simon J. Gerraty * install-mk (MK_VERSION): 20140801 * dep.mk: use explicit MKDEP_MK rather than overload MKDEP to identify the autodep.mk variant. * sys.dependfile.mk: delete .MAKE.DEPENDFILE if its initial value does not match .MAKE.DEPENDFILE_PREFIX * meta.autodep.mk: if _bootstrap_dirdeps add RELDIR to DIRDEPS 2014-05-22 Simon J. Gerraty * install-mk (MK_VERSION): 20140522 * lib.mk: use CC to link shlib for linux too patch from Brendan MacDonell 2014-05-05 Simon J. Gerraty * meta.autodep.mk: add _reldir_{finish,failed} for gathering stats if WITH_META_STATS is defined. 2014-05-02 Simon J. Gerraty * dirdeps.mk: accept -DWITHOUT_DIRDEPS (same a as -DNO_DIRDEPS) to supress dirdeps outside of .CURDIR. 2014-04-05 Simon J. Gerraty * Fix spelling errors - patch from Pedro Giffuni 2014-03-14 Simon J. Gerraty * install-mk (MK_VERSION): 20140314 * dirdeps.mk (beforedirdeps): a handy hook * dirdeps.mk (DIRDEP_MAKE): allow the actual command we run to visit leaf dirs to be intercepted (eg. for distributed build). * dirdeps.mk (__depdirs): ensure // don't sneak in * gendirdeps.mk (DIRDEPS): ensure // don't sneak in 2014-02-21 Simon J. Gerraty * rst2htm.mk (RST2PDF): add support for rst2pdf 2014-02-14 Simon J. Gerraty * install-mk (MK_VERSION): bump version * dirdeps.mk (_last_dependfile): use .INCLUDEDFROMFILE if available. 2014-02-10 Simon J. Gerraty * options.mk: avoid :U so this isn't bmake dependent 2014-02-09 Simon J. Gerraty * options.mk: cleanup and simplify semanitcs NO_* dominates all, if both WITH_* and WITHOUT_* are defined then result is DOMINATE_* which defaults to "no". Ie. WITHOUT_ normally wins. 2013-12-12 Simon J. Gerraty * install-mk (MK_VERSION): bump version * meta2deps.py: convert to print function for python3 compat. we also need to open files with mode 'r' rather than 'rb' otherwise we get bytes instead of strings. 2013-10-10 Simon J. Gerraty * install-mk (MK_VERSION): bump version * dirdeps.mk: when TARGET_SPEC_VARS is more than just MACHINE apply the same filtering (M_dep_qual_fixes) when setting _machines as _build_dirs. Also fix the filtering of Makefile.depend files - for reporting what we are looking for (M_dep_qual_fixes can get confused by Makefile.depend) Add some more debug info. 2013-09-04 Simon J. Gerraty * gendirdeps.mk (_objtops): fix typo also while processing M2D_OBJROOTS to gather qualdir_list qualify $ql with loop iterator to ensure correct results. 2013-08-01 Simon J. Gerraty * install-mk (MK_VERSION): 20130801 * libs.mk: update to match progs.mk 2013-07-26 Simon J. Gerraty * install-mk (MK_VERSION): 20130726 some updates from Juniper and FreeBSD o meta2deps.py: indicate file and line number when we hit parse errors also allow @file to provide huge list of .meta files. * meta2deps.py: add try_parse() to cleanup the above. 2013-07-16 Simon J. Gerraty * install-mk (MK_VERSION): 20130716 * own.mk: add GPROG as an option * prog.mk: honor MK_GPROF==yes 2013-05-10 Simon J. Gerraty * install-mk (MK_VERSION): 20130505 * gendirdeps.mk, meta2deps.py, meta2deps.sh: handle $TARGET_SPEC for when $MACHINE isn't enough for objdir distinction. Bring meta2deps.sh closer to par with meta2deps.py. 2013-04-18 Simon J. Gerraty * meta.stage.mk: set INSTALL to STAGE_INSTALL when making 'all' also if the target 'beforeinstall' exists, make it depend on .dirdep (incase it uses STAGE_INSTALL). 2013-04-17 Simon J. Gerraty * install-mk (MK_VERSION): 20130401 ;-) * meta.stage.mk (STAGE_INSTALL_SH): add stage-install.sh as wrapper around install(1). * options.mk (OPTION_PREFIX): Allow a prefix other than MK_ 2013-03-30 Simon J. Gerraty * meta2deps.py (MetaFile.__init__): ensure self.cwd is initialized. * install-mk (MK_VERSION): bump version 2013-03-21 Simon J. Gerraty * install-mk (MK_VERSION): bump version * gendirdeps.mk: do not apply :tA to DPADD entries, since we lose any trailing /., rather apply :tA only when needed. * gendirdeps.mk: better mimic meta2deps handling of .dirdep files. * meta.stage.mk (LN_CP_SCRIPT): Add LnCp to do the ln||cp dance consistently. * dirdeps.mk: better describe the dance in sys.mk for TARGET_SPEC. 2013-03-18 Simon J. Gerraty * gendirdeps.mk: revert the dance around .MAKE.DEPENDFILE_DEFAULT it is simpler to just not update when say building for "host" (where we know we apply filters to DIRDEPS), and using a non-machine qualified dependfile. 2013-03-16 Simon J. Gerraty * dirdeps.mk: improve DIRDEPS filtering by allowing DEP_SKIP_DIR and DEP_DIRDEPS_FILTER to vary by DEP_MACHINE and DEP_TARGET_SPEC * gendirdeps.mk: ensure _objroot has trailing / if it needs it. * meta2deps.py: if machine is "host", then also trim self.host_target from any OBJROOTS. 2013-03-11 Simon J. Gerraty * gendirdeps.mk: if .MAKE.DEPENDFILE_DEFAULT is not machine qualified but _DEPENDFILE is, and .MAKE.DEPENDFILE_DEFAULT exists but _DEPENDFILE does not, compare the new _DEPENDFILE against .MAKE.DEPENDFILE_DEFAULT and discard if the same. 2013-03-08 Simon J. Gerraty * meta.stage.mk: use STAGE_TARGETS to control .ORDER and hook to all: via staging: 2013-03-07 Simon J. Gerraty * sys.dependfile.mk (.MAKE.DEPENDFILE_DEFAULT): use a separate variable for the default .MAKE.DEPENDFILE value so that it can be controlled independently of .MAKE.DEPENDFILE_PREFERENCE * meta.stage.mk: throw error if cp fails etc. Stage*() return early if passed no args. .ORDER stage_* 2013-03-03 Simon J. Gerraty * install-mk (MK_VERSION): bump version * gendirdeps.mk: handle multiple M2D_OBJROOTS better. 2013-02-10 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20130210 * import latest dirdeps.mk, gendirdeps.mk and meta2deps.py from Juniper. o dirdeps.mk now fully supports TARGET_SPEC consisting of more than just MACHINE. o no longer use DEP_MACHINE from Makefile.depend* so remove it. 2013-01-23 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20130123 * meta.stage.mk: add stage_links (hard links). if doing hard links, we add dest to link as well. Default the stage dir for [sym]links to STAGE_OBJTOP since these are typically specified as absolute paths. Add -m "mode" flag to StageFiles and StageAs. 2012-11-11 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20121111 * autoconf.mk: avoid meta mode seeing changed commands for config.status * meta.autodep.mk: pass resolved MAKESYSPATH to gendirdeps in case we were found via .../mk * sys.clean-env.mk: move it from examples, we and others use it "as is". * FILES: add srctop.mk and options.mk * own.mk: convert to using options.mk which is modeled after FreeBSD's handling of MK_* but more flexible. This allows MK_* for boolean knobs to not be confused with MK* which can be commands. * examples/sys.clean-env.mk: add WITH[OUT]_ to MAKE_ENV_SAVE_PREFIX_LIST. Mention that HOME=/var/empty might be a good idea. 2012-11-08 Simon J. Gerraty * sys.dependfile.mk: if not depend file exists, $MACHINE specific ones are supported but not the default, check if any exist and follow suit. 2012-11-06 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20121106 2012-11-05 Simon J. Gerraty * import latest dirdeps.mk and meta2deps.py from Juniper. * progs.mk: add MAN and CXXFLAGS to PROG_VARS also add PROGS_TARGETS and pass on PROG_CXX if it seems appropriate. 2012-11-04 Simon J. Gerraty * meta.stage.mk: update CLEANFILES remove redundant cp of .dirdep from STAGE_AS_SCRIPT. * progs.mk: Add LDADD to PROG_VARS 2012-10-12 Simon J. Gerraty * meta.stage.mk (STAGE_DIR_FILTER): track dirs we stage to in _STAGED_DIRS so that these can be turned into filters for GENDIRDEPS_FILTER. 2012-10-10 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20121010 * meta.stage.mk (STAGE_DIRDEP_SCRIPT): check that an existing target.dirdep matches .dirdep 2012-08-08 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20120808 * import latest meta2deps.py from Juniper. 2012-07-11 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20120711 * dep.mk: add explicit dependencies on SRCS after applying SRCS_DEP_FILTER * meta.autodep.mk: add explicit dependencies on SRCS after applying SRCS_DEP_FILTER * meta.autodep.mk: ensure GENDIRDEPS_FILTER is exported if needed. 2012-06-26 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20120626 * meta.sys.mk: ignore PYTHON if it does not exist compare ${.MAKE.DEPENDFILE:E} against ${MACHINE} is more reliable. * meta.stage.mk: examine .MAKE.DEPENDFILE_PREFERENCE for any entries ending in .${MACHINE} to decide if qualified _dirdep is needed. * gendirdeps.mk: only produce unqualified deps if no .MAKE.DEPENDFILE_PREFERENCE ends in .${MACHINE} * meta.subdir.mk: apply SUBDIRDEPS_FILTER 2012-04-20 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20120420 * add sys.dependfile.mk so we can experiment with .MAKE.DEPENDFILE_PREFERENCE * meta.autodep.mk: _DEPENDFILE is precious! 2012-03-15 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20120315 * install-new.mk: avoid being interrupted 2012-02-26 Simon J. Gerraty * man.mk: MAN might have multiple values so be careful with exists(). 2012-01-19 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20120112 * fix examples/sys.clean-env.mk so that MAKEOBJDIR is handled as: MAKEOBJDIR='${.CURDIR:S,${SRCTOP},${OBJTOP},}' 2011-12-03 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20111201 * import dirdeps.mk from Juniper sjg@ o more consistent handling of DEP_MACHINE, especially when dealing with an odd Makefile.depend, when normally using Makefile.depend.${MACHINE} 2011-11-22 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20111122 * meta.autodep.mk: add some debug output, be more crisp about updating. Use ${.ALLTARGETS:M*.o} as a clue for .depend 2011-11-13 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20111111 it's too cool to miss * import meta* updates from Juniper sjg@ o dirdeps.mk set DEP_MACHINE for Makefile.depend (when we are normally using Makefile.depend.${MACHINE}), handy for read-only manually maintained dependencies. o meta2deps.py add a clear 'ERROR:' token if an exception is raised. o gendirdeps.mk if ERROR: from meta2deps.py do not update anything. 2011-10-30 Simon J. Gerraty * install-new.mk separate the cmp and copy logic to its own function. 2011-10-28 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20111028 * sys.mk: include auto.obj.mk if MKOBJDIRS is set to auto * subdir.mk: ensure _SUBDIRUSE is provided * meta.autodep.mk: remove dependency of gendirdeps.mk on auto.obj.mk * meta.subdir.mk: always allow for Makefile.depend 2011-10-10 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20111010 o minor tweak to *dirdeps.mk from Juniper sjg@ 2011-10-01 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20111001 o add meta2deps.py from Juniper sjg@ o tweak gendirdeps.mk to work with meta2deps.py when not cross-building * autoconf.mk: add autoconf-input as a hook for regenerating AUTOCONF_INPUTS (configure). 2011-08-24 Simon J. Gerraty * meta.autodep.mk: if we do not have OBJS, .depend isn't a useful trigger for updating Makefile.depend* 2011-08-08 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20110808 * obj.mk: minor cleanup * auto.obj.mk: improve description of Mkdirs and honor NO_OBJ too. 2011-08-01 Simon J. Gerraty * auto.obj.mk (.OBJDIR): throw an error if we cannot use the specified dir. 2011-06-28 Simon J. Gerraty * meta.autodep.mk: if XMAKE_META_FILE is set the makefile uses a foreign make, and so dependencies can only be gathered from a clean tree build. 2011-06-24 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20110622 * meta.autodep.mk: improve bootstraping 2011-06-10 Simon J. Gerraty * yacc.mk: handle the corner case of .c being removed while .h remains. 2011-06-08 Simon J. Gerraty * yacc.mk: do .y.h and .y.c separately 2011-06-04 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20110606 * don't store SRC_DIRDEPS in Makefile.depend* by default not everyone needs it. 2011-05-04 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20110505 first release including meta mode makefiles 2011-05-02 Simon J. Gerraty * meta.stage.mk: add STAGE_AS_SETS and stage_as for things that need to be staged with different names. 2011-05-01 Simon J. Gerraty * meta.stage.mk: add notion of STAGE_SETS so a makefile can stage to multiple dirs 2011-04-03 Simon J. Gerraty * rst2htm.mk: convert rst to s5 (slides) or plain html depending on target name. 2011-03-30 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20110330 2011-03-29 Simon J. Gerraty * sys.mk (_DEBUG_MAKE_FLAGS): use indirection so that DEBUG_MAKE_FLAGS0 can be used to debug level 0 only and DEBUG_MAKE_FLAGS for the rest. * sys.mk: re-define M_whence in terms of M_type. M_type is useful for checking if something is a builtin. 2011-03-16 Simon J. Gerraty * meta.stage.mk: add stage_symlinks and leverage StageLinks for stage_libs 2011-03-10 Simon J. Gerraty * dirdeps.mk: correct value for _depdir_files depends on .MAKE.DEPENDFILE Add our copyright - just to make it clear we have frobbed this quite a bit. DEP_MACHINE needs to be set to MACHINE each time, if using only Makefile.depend (cf. Makefile.depend.${MACHINE}) * meta.stage.mk: meta mode version of staging * init.mk, final.mk: include local.*.mk to simplify customization 2011-03-03 Simon J. Gerraty * auto.obj.mk: just because we are doing mk destroy, we should still set .OBJDIR correctly if it exists. * install-mk (mksrc): do not exclude meta.sys.mk 2011-03-01 Simon J. Gerraty * host-target.mk: set/export _HOST_ARCH etc separately, catch junk resulting from uname -p, so we can find sys/Linux.mk correctly. 2011-02-18 Simon J. Gerraty * meta.sys.mk: throw an error if /dev/filemon is missing and we expected to be updating Makefile.depend* 2011-02-14 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20110214 * meta.subdir.mk: add support for -DBOOTSTRAP_DEPENDFILES 2010-09-25 Simon J. Gerraty * meta.sys.mk: not valid for older bmake 2010-09-24 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100919 include dirdeps.mk et al from Juniper Networks, for meta mode - requires filemon(9). * sys.mk, subdir.mk: Add hooks for meta mode. we do this as meta.sys.mk, meta.autodep.mk and meta.subdir.mk to make turning it on/off simple. 2010-06-16 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100616 * fix typo in sys.mk 2010-06-12 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100612 * lib.mk: remove duplicate addition to SOBJS 2010-06-10 Simon J. Gerraty * sys.mk: Add a means of selectively turning on debug flags. Eg. DEBUG_MAKE_FLAGS=-dv DEBUG_MAKE_DIRS="*lib/sjg" will act as if we did make -dv if .CURDIR ends in lib/sjg DEBUG_MAKE_SYS_DIRS does the same thing, but we set the flags at the start of sys.mk rather than the end. This only makes sense for leaf dirs, so we check that .MAKE.LEVEL > 0 2010-06-09 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100608 * sys.mk: include sys.env.mk later so it can use M_ListToSkip et al. * examples/sys.clean-env.mk: require MAKE_VERIONS >= 20100606 also make it easier for folk to tweak 2010-06-08 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100606 do not install examples/* * FILES: add examples/sys.clean-env.mk * examples/sys.clean-env.mk: use .export-env to handle MAKEOBJDIR this requires bmake-20100606 or later to work. 2010-05-13 Simon J. Gerraty * sys.mk (M_tA): better simulate the result of :tA if not available. 2010-05-04 Simon J. Gerraty * sys.mk: canonicalize MAKE_VERSION old versions reported bmake- build- whereas we only care about 2010-04-25 Simon J. Gerraty * install-mk: just warn about FORCE_{BSD,SYS}_MK being ignored * lib.mk: we only build the shared lib if SHLIB_FULLVERSION is !empty 2010-04-22 Simon J. Gerraty * dpadd.mk: use LDADD_* if defined. 2010-04-21 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100420 * sys/NetBSD.mk: add MACHINE_CPU to keep netbsd makefiles happy * autoconf.mk allow AUTO_AUTOCONF 2010-04-19 Simon J. Gerraty * obj.mk: add objwarn to keep freebsd makefiles happy * auto.obj.mk: ensure Mkdirs is available. * FILES: add auto.dep.mk - a simpler version of autodep.mk * dep.mk: auto.dep.mk does not do 'make depend' so ignore it if asked to do that. fix/simplify the tests for when to run mkdep. * auto.dep.mk: add some explanation of how/what we do. * autodep.mk: skip the .OPTIONAL frobbing of .depend bmake's FROM_DEPEND flag makes it redundant. 2010-04-13 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100404 * subdir.mk: protect from multiple inclusion using _SUBDIRUSE. * obj.mk: protect from multiple inclusion even as bsd.obj.mk Also create a target _SUBDIRUSE so that we can be used without subdir.mk 2010-04-12 Simon J. Gerraty * dep.mk: use <> when .including so can override. 2010-01-11 Simon J. Gerraty * lib.mk (SHLIB_LINKS): ensure a string comparison. 2010-01-04 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20100102 * own.mk: ensure PRINTOBJDIR works * autoconf.mk: pass on CONFIGURE_ARGS * init.mk: handle COPTS.${.IMPSRC:T} etc. * lib.mk: allow sys.mk to control SHLIB_FULLVERSION fix handling of symlinks for darwin * libnames.mk: add DSHLIBEXT for libs which only exist as shared. * man.mk: suppress chown when not root. * rst2htm.mk: allow srcs from multiple locations. * sys.mk: M_whence, stop after 1st line of output. * sys/Darwin.mk: Use .dylib for DSHLIBEXT and HOST_LIBEXT * sys/SunOS.mk: we need to export PATH 2009-12-23 Simon J. Gerraty * install-mk (MK_VERSION): bump version include rst2htm.mk 2009-12-17 Simon J. Gerraty * sys.mk,libnames.mk add .-include this allows local customization without the need to edit the distributed files. 2009-12-14 Simon J. Gerraty * dpadd.mk (__dpadd_libdirs): order -L's to avoid picking up older versions already installed. 2009-12-13 Simon J. Gerraty * stage.mk (.stage-install): generalize lib.mk's .libinstall * rules.mk rules for generic Makefile. * inc.mk install for includes. 2009-12-11 Simon J. Gerraty * sys/NetBSD.mk (MAKE_VERSION): some of our *.mk want to check this, so provide it if using native make. 2009-12-10 Simon J. Gerraty * FILES: move all the platform *.sys.mk files to sys/*.mk * Rename Generic.sys.mk to sys.mk - we always want it. 2009-11-17 Simon J. Gerraty * install-mk (MK_VERSION): bump version * host-target.mk: only export the expensive stuff * Generic.sys.mk (sys_mk): for SunOS we need to look for ${HOST_OS}.${HOST_OSMAJOR} too! 2009-11-07 Simon J. Gerraty * install-mk (MK_VERSION): bump version * lib.mk: if sys.mk doesn't give us an lorder, don't use it. based on patch from Greg Olszewski. * Generic.sys.mk: if we have nothing to work with set LORDER etc only if we can find it. 2009-09-08 Simon J. Gerraty * install-mk (MK_VERSION): bump version * man.mk: cleanman: remove CLEANMAN if defined. 2009-09-04 Simon J. Gerraty * SunOS.5.sys.mk (CC): Use ?= like the other *sys.mk 2009-07-17 Simon J. Gerraty * install-mk (MK_VERSION): bump version include auto.obj.mk 2009-03-26 Simon J. Gerraty * prog.mk,lib.mk: ensure test of USE_DPADD_MK doesn't fail. 2008-11-11 Simon J. Gerraty * install-mk (MK_VERSION): bump version man.mk: ensure we generate *.cat1 etc in . 2008-07-16 Simon J. Gerraty * install-mk (MK_VERSION): bump version add prlist.mk 2007-11-25 Simon J. Gerraty * Generic.sys.mk: Allow os specific sys.mk to be in a subdir of ${.PARSEDIR} 2007-11-22 Simon J. Gerraty * install-mk (MK_VERSION): bump version * general cleanup * dpadd.mk introduce DPMAGIC_LIBS_* 2007-04-30 Simon J. Gerraty * install-mk (MK_VERSION): bump version * libs.mk, progs.mk, autodep.mk: allow for per lib/prog depend files and ensure clean is called for each lib/prog. 2007-03-27 Simon J. Gerraty * autodep.mk (.depend): delete lines that do not start with space and do not contain ':' 2007-02-16 Simon J. Gerraty * autodep.mk (.depend): gcc may wrap lines if pathnames are long so make sure the transform for .OPTIONAL copes. 2007-02-03 Simon J. Gerraty * install-mk (MK_VERSION): bump version * own.mk: make sure RM and LN are defined. * obj.mk: fix a typo, and objlink target. 2006-12-30 Simon J. Gerraty * install-mk (MK_VERSION): bump version * added libs.mk - analogous to progs.mk make both of them always inlcude {lib,prog}.mk 2006-12-28 Simon J. Gerraty * progs.mk: add a means of building multiple apps in one dir. 2006-11-26 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20061126 * warnings.mk: detect invalid WARNINGS_SET * warnings.mk: use ${.TARGET:T:R}.o when looking for target specific warnings. * For .cc sources, turn off warnings that g++ vomits on. 2006-11-08 Simon J. Gerraty * own.mk: if __initialized__ target doesn't exist and we are FreeBSD we got here directly from sys.mk 2006-11-06 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20061106 add scripts.mk 2006-03-18 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20060318 * autodep.mk: avoid := when modifying OBJS into __dependsrcs 2006-03-02 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20060302 * autodep.mk: use -MF et al to help gcc+ccache DTRT. 2006-03-01 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20060301 * autodep.mk (.depend): if MAKE_VERSION is newer than 20050530 we can make .END depend on .depend and make .depend depend on __depsrcs that exist. * dpadd.mk: add SRC_PATHADD 2005-11-04 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20051104 * prog.mk: remove all the LIBC?= junk, use .-include libnames.mk instead (none by default). also if USE_DPADD_MK is set, include that. 2005-10-09 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20051001 Add UnixWare.sys.mk from Klaus Heinz. 2005-04-05 Simon J. Gerraty * install-mk: always install *.sys.mk and if need be symlink one to sys.mk 2005-03-22 Simon J. Gerraty * subdir.mk, own.mk: use .MAKE rather than MAKE 2004-02-15 Simon J. Gerraty * own.mk: don't use NetBSD's _SRC_TOP_ it can cause confusion. Also don't take just 'mk' as a srctop indicator. 2004-02-14 Simon J. Gerraty * warnings.mk: overhauled, now very powerful. 2004-02-03 Simon J. Gerraty * Generic.sys.mk: need to use ${.PARSEDIR} with exists(). 2004-02-01 Simon J. Gerraty * install-mk (MK_VERSION): bump version to 20040201 * extract HOST_TARGET stuff to host-target.mk so own.mk and Generic.sys.mk can share. * fix typo in autodep.mk _SUBDIRUSE not _SUBDIR. 2003-09-30 Simon J. Gerraty * install-mk (MK_VERSION): 20030930 * rename generic.sys.mk to Generic.sys.mk so that it does not get installed (unless being used as sys.mk) * set OS and ROOT_GROUP for those that we know the value. for others (eg. Generic.sys.mk) wrap the != in an .ifndef so we don't do it again for each sub-make. 2003-09-28 Simon J. Gerraty * install-mk (MK_VERSION): 20030928 Add some extra *.sys.mk from bootstrap-pkgsrc some of these likely still need work. Make everything default to root:wheel ownership, sys.mk can set ROOT_GROUP accordingly. 2003-08-07 Simon J. Gerraty * install-mk: if FORCE_BSD_MK={cp,ln} use the ones in SYS_MK_DIR not the portable ones. 2003-07-31 Simon J. Gerraty * install-mk: add ability to use cp -f when updating destination .mk files. Also now possible to play games with FORCE_SYS_MK=ln etc on *BSD machines to link /usr/share/mk/sys.mk into dest - not recommended unless you seriously want to. 2003-07-28 Simon J. Gerraty * own.mk (IMPFLAGS): add support for COPTS.${IMPSRC:T} etc for semi-compatability with NetBSD. 2003-07-23 Simon J. Gerraty * install-mk: add a version indicator 2003-07-22 Simon J. Gerraty * prog.mk: don't try and use ${LIBCRT0} if its /dev/null * install-mk: Allow FORCE_SYS_MK to come from env diff --git a/contrib/bmake/mk/FILES b/contrib/bmake/mk/FILES index 51b1acd716b2..91c4387e8ccb 100644 --- a/contrib/bmake/mk/FILES +++ b/contrib/bmake/mk/FILES @@ -1,74 +1,75 @@ ChangeLog FILES LICENSE README auto.obj.mk autoconf.mk autodep.mk auto.dep.mk compiler.mk cython.mk dep.mk doc.mk dpadd.mk files.mk final.mk host-target.mk host.libnames.mk inc.mk init.mk install-mk java.mk ldorder.mk lib.mk libnames.mk libs.mk links.mk man.mk manifest.mk mk-files.txt mkopt.sh nls.mk obj.mk options.mk own.mk prlist.mk prog.mk progs.mk rst2htm.mk scripts.mk srctop.mk stage-install.sh subdir.mk sys.mk sys.clean-env.mk sys.debug.mk sys.dependfile.mk sys.vars.mk sys/AIX.mk sys/Darwin.mk sys/Generic.mk sys/HP-UX.mk sys/IRIX.mk sys/Linux.mk sys/NetBSD.mk sys/OSF1.mk sys/OpenBSD.mk +sys/SCO_SV.mk sys/SunOS.mk sys/UnixWare.mk target-flags.mk warnings.mk whats.mk yacc.mk dirdeps.mk dirdeps-cache-update.mk dirdeps-options.mk dirdeps-targets.mk gendirdeps.mk install-new.mk meta2deps.py meta2deps.sh meta.sys.mk meta.autodep.mk meta.stage.mk meta.subdir.mk diff --git a/contrib/bmake/mk/auto.dep.mk b/contrib/bmake/mk/auto.dep.mk index d905649ab206..c30b37f44053 100644 --- a/contrib/bmake/mk/auto.dep.mk +++ b/contrib/bmake/mk/auto.dep.mk @@ -1,74 +1,88 @@ # # RCSid: -# $Id: auto.dep.mk,v 1.6 2020/08/19 17:51:53 sjg Exp $ +# $Id: auto.dep.mk,v 1.10 2021/12/11 18:57:41 sjg Exp $ # -# @(#) Copyright (c) 2010, Simon J. Gerraty +# @(#) Copyright (c) 2010-2021, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # This module provides automagic dependency generation along the # lines suggested in the GNU make.info # set MKDEP_MK=auto.dep.mk and dep.mk will include us # This version differs from autodep.mk, in that # we use ${.TARGET:T}.d rather than ${.TARGET:T:R}.d # this makes it simpler to get the args to -MF and -MT right # and ensure we can simply include all the .d files. # # However suffix rules do not work with something like .o.d so we # don't even try to handle 'make depend' gracefully. # dep.mk will handle that itself. # .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: - -# this what bmake > 20100401 will look for -.MAKE.DEPENDFILE ?= .depend +__${.PARSEFILE}__: .NOTMAIN # set this to -MMD to ignore /usr/include # actually it ignores <> so may not be a great idea CFLAGS_MD ?= -MD # -MF etc not available on all gcc versions. +.if ${COMPILER_TYPE:Ugcc} == "gcc" && ${COMPILER_VERSION:U0} < 30000 +CFLAGS_MF= +.endif CFLAGS_MF ?= -MF ${.TARGET:T}.d -MT ${.TARGET:T} CFLAGS += ${CFLAGS_MD} ${CFLAGS_MF} CXXFLAGS += ${CFLAGS_MD} ${CFLAGS_MF} -CLEANFILES += .depend ${.MAKE.DEPENDFILE} *.d +CLEANFILES += .depend *.d + +.if ${MAKE_VERSION} >= 20160218 + +# we have .dinclude and this is all that is required +.if empty(_SKIP_BUILD) +_all_objs = ${OBJS} ${POBJS} ${SOBJS} +.for d in ${_all_objs:M*o:T:O:u:%=%.d} +.dinclude <$d> +.endfor +.endif + +.else # we lack .dinclude + +.if ${.MAKE.MODE:Unormal:Mmeta} != "" +# ignore .MAKE.DEPENDFILE +DEPENDFILE = .depend +.else +# this what bmake > 20100401 will look for +.MAKE.DEPENDFILE ?= .depend +DEPENDFILE ?= ${.MAKE.DEPENDFILE} +.endif + +CLEANFILES += ${DEPENDFILE} -.if ${MAKE_VERSION} < 20160218 # skip generating dependfile for misc targets .if ${.TARGETS:Uall:M*all} != "" -.END: ${.MAKE.DEPENDFILE} +.END: ${DEPENDFILE} .endif # doing 'make depend' isn't a big win with this model .if !target(depend) -depend: ${.MAKE.DEPENDFILE} +depend: ${DEPENDFILE} .endif # this is trivial -${.MAKE.DEPENDFILE}: ${OBJS} ${POBJS} ${SOBJS} +${DEPENDFILE}: ${OBJS} ${POBJS} ${SOBJS} -@for f in ${.ALLSRC:M*o:T:O:u:%=%.d}; do \ echo ".-include \"$$f\""; \ done > $@ -.else -# we have .dinclude -.if empty(_SKIP_BUILD) -_all_objs = ${OBJS} ${POBJS} ${SOBJS} -.for d in ${_all_objs:M*o:T:O:u:%=%.d} -.dinclude <$d> -.endfor -.endif .endif .endif diff --git a/contrib/bmake/mk/autoconf.mk b/contrib/bmake/mk/autoconf.mk index 61e6978043a8..6011a8af4df5 100644 --- a/contrib/bmake/mk/autoconf.mk +++ b/contrib/bmake/mk/autoconf.mk @@ -1,80 +1,85 @@ -# $Id: autoconf.mk,v 1.10 2020/08/19 17:51:53 sjg Exp $ +# $Id: autoconf.mk,v 1.16 2021/10/19 17:36:06 sjg Exp $ # # @(#) Copyright (c) 1996-2009, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # -.NOPATH: config.h config.status +.NOPATH: config.h config.gen config.recheck config.status CONFIGURE_DEPS += ${.CURDIR}/config.h.in ${.CURDIR}/configure .if !target(config.h) -config.h: ${CONFIGURE_DEPS} config.status +config.h: .NOTMAIN ${CONFIGURE_DEPS} config.status ./config.status +.if !empty(AUTOCONF_GENERATED_MAKEFILE) && ${AUTOCONF_GENERATED_MAKEFILE:T:@m@${"${.MAKE.MAKEFILES:T:M$m}":?yes:no}@:Mno} != "" + @echo Generated ${AUTOCONF_GENERATED_MAKEFILE}, you need to restart; exit 1 +.endif .endif .if !target(config.status) # avoid the targets behaving differently +config.status: .NOTMAIN .if exists(${.OBJDIR}/config.status) config.status: config.recheck .else config.status: config.gen .endif -config.recheck: ${CONFIGURE_DEPS} +config.recheck: .NOTMAIN ${CONFIGURE_DEPS} config.gen ./config.status --recheck @touch $@ -config.gen: ${CONFIGURE_DEPS} +config.gen: .NOTMAIN ${CONFIGURE_DEPS} CC="${CC} ${CCMODE}" ${.CURDIR}/configure --no-create ${CONFIGURE_ARGS} @touch $@ config.recheck -CLEANFILES+= config.recheck config.gen config.status *.meta +CLEANFILES+= config.recheck config.gen config.status *.meta \ + ${AUTOCONF_GENERATED_MAKEFILE:U} .endif # avoid things blowing up if these are not here... # this is not quite per the autoconf manual, # and is extremely convoluted - but all utterly necessary! .if make(autoconf-in) || make(configure) || make(config.h.in) || ${AUTO_AUTOCONF:Uno:tl} == "yes" AUTOCONF ?= autoconf AUTOHEADER ?= autoheader # expand it to a full path AUTOCONF := ${AUTOCONF:${M_whence}} .if exists(${AUTOCONF}) .PRECIOUS: configure config.h.in config.status ACLOCAL = ACCONFIG = .if exists(${.CURDIR}/aclocal.m4) ACLOCAL += aclocal.m4 .endif # use of acconfig.h is deprecated! .if exists(${.CURDIR}/acconfig.h) ACCONFIG += acconfig.h .endif -config.h.in: ${.CURDIR}/configure.in ${ACCONFIG} +config.h.in: .NOTMAIN ${.CURDIR}/configure.in ${ACCONFIG} (cd ${.CURDIR} && ${AUTOHEADER}) -configure: ${.CURDIR}/configure.in ${ACLOCAL} +configure: .NOTMAIN ${.CURDIR}/configure.in ${ACLOCAL} (cd ${.CURDIR} && ${AUTOCONF}) AUTOCONF_INPUTS += configure -autoconf-input: ${AUTOCONF_INPUTS} +autoconf-input: .NOTMAIN ${AUTOCONF_INPUTS} .endif .endif diff --git a/contrib/bmake/mk/autodep.mk b/contrib/bmake/mk/autodep.mk index a7bb942278c9..9104da2e2567 100644 --- a/contrib/bmake/mk/autodep.mk +++ b/contrib/bmake/mk/autodep.mk @@ -1,219 +1,222 @@ # # RCSid: -# $Id: autodep.mk,v 1.38 2020/08/19 17:51:53 sjg Exp $ +# $Id: autodep.mk,v 1.40 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 1999-2010, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # This module provides automagic dependency generation along the # lines suggested in the GNU make.info # The depend target is mainly for backwards compatibility, # dependencies are normally updated as part of compilation. .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN DEPENDFILE?= .depend .for d in ${DEPENDFILE:N.depend} # bmake only groks .depend .if ${MAKE_VERSION} < 20160218 .-include <$d> .else .dinclude <$d> .endif .endfor # it does nothing if SRCS is not defined or is empty .if defined(SRCS) && !empty(SRCS) DEPSRCS?=${SRCS} __depsrcs=${DEPSRCS:M*.c} __depsrcs+=${DEPSRCS:M*.y} __depsrcs+=${DEPSRCS:M*.l} __depsrcs+=${DEPSRCS:M*.s} __depsrcs+=${DEPSRCS:M*.S} __depsrcs+=${DEPSRCS:M*.cc} __depsrcs+=${DEPSRCS:M*.cpp} __depsrcs+=${DEPSRCS:M*.C} __depsrcs+=${DEPSRCS:M*.cxx} __depsrcs+=${DEPSRCS:M*.pc} .for s in ${__depsrcs} ${s:T:R}.d: $s .endfor __depsrcs:=${__depsrcs:T:R:S/$/.d/g} # we also need to handle makefiles where the .d's from __depsrcs # don't match those from OBJS # we avoid using := here, since the modifier applied to OBJS # can cause trouble if there are any undefined vars in OBJS. __dependsrcsx?= ${__depsrcs} ${OBJS:S/.o/.d/} __dependsrcs= ${__dependsrcsx:O:u} # clean up any .c files we may have generated #__gensrcs:= ${DEPSRCS:M*.y} ${DEPSRCS:M*.l} #CLEANFILES+= ${__gensrcs:T:R:S/$/.c/g} # set this to -MMD to ignore /usr/include # actually it ignores <> so may not be a great idea CFLAGS_MD?=-MD # -MF etc not available on all gcc versions. # we "fix" the .o later +.if ${COMPILER_TYPE:Ugcc} == "gcc" && ${COMPILER_VERSION:U0} < 30000 +CFLAGS_MF= +.endif CFLAGS_MF?=-MF ${.TARGET:T:R}.d -MT ${.TARGET:T:R}.o CFLAGS+= ${CFLAGS_MD} ${CFLAGS_MF} RM?= rm MAKE_SHELL?= sh # watch out for people who don't use CPPFLAGS CPPFLAGS_MD=${CFLAGS:M-[IUD]*} ${CPPFLAGS} CXXFLAGS_MD=${CXXFLAGS:M-[IUD]*} ${CPPFLAGS} # just in case these need to be different CC_MD?=${CC} CXX_MD?=${CXX} # should have been set by sys.mk CXX_SUFFIXES?= .cc .cpp .cxx .C # so we can do an explicit make depend, but not otherwise .if make(depend) .SUFFIXES: .d .if empty(CFLAGS_MD) .y.d: @echo updating dependencies for $< @${YACC} ${YFLAGS} $< @${MAKE_SHELL} -ec "${CC_MD} -M ${CPPFLAGS_MD} y.tab.c | sed '/:/s/^/$@ /' > $@" || { ${RM} -f y.tab.c $@; false; } @${RM} -f y.tab.c .l.d: @echo updating dependencies for $< ${LEX} ${LFLAGS} $< @${MAKE_SHELL} -ec "${CC_MD} -M ${CPPFLAGS_MD} lex.yy.c | sed '/:/s/^/$@ /' > $@" || { ${RM} -f lex.yy.c $@; false; } @${RM} -f lex.yy.c .c.d: @echo updating dependencies for $< @${MAKE_SHELL} -ec "${CC_MD} -M ${CPPFLAGS_MD} $< | sed '/:/s/^/$@ /' > $@" || { ${RM} -f $@; false; } .s.d .S.d: @echo updating dependencies for $< @${MAKE_SHELL} -ec "${CC_MD} -M ${CPPFLAGS_MD} ${AINC} $< | sed '/:/s/^/$@ /' > $@" || { ${RM} -f $@; false; } ${CXX_SUFFIXES:%=%.d}: @echo updating dependencies for $< @${MAKE_SHELL} -ec "${CXX_MD} -M ${CXXFLAGS_MD} $< | sed '/:/s/^/$@ /' > $@" || { ${RM} -f $@; false; } .else .y.d: ${YACC} ${YFLAGS} $< ${CC_MD} ${CFLAGS_MD:S/D//} ${CPPFLAGS_MD} y.tab.c > $@ || { ${RM} -f y.tab.c $@; false; } ${RM} -f y.tab.c .l.d: ${LEX} ${LFLAGS} $< ${CC_MD} ${CFLAGS_MD:S/D//} ${CPPFLAGS_MD} lex.yy.c > $@ || { ${RM} -f lex.yy.c $@; false; } ${RM} -f lex.yy.c .c.d: ${CC_MD} ${CFLAGS_MD:S/D//} ${CPPFLAGS_MD} $< > $@ || { ${RM} -f $@; false; } .s.d .S.d: ${CC_MD} ${CFLAGS_MD:S/D//} ${CPPFLAGS_MD} ${AINC} $< > $@ || { ${RM} -f $@; false; } ${CXX_SUFFIXES:%=%.d}: ${CXX_MD} ${CFLAGS_MD:S/D//} ${CXXFLAGS_MD} $< > $@ || { ${RM} -f $@; false; } .endif .if !target(depend) depend: beforedepend ${DEPENDFILE} afterdepend _SUBDIRUSE ${DEPENDFILE}: ${DEPSRCS} ${__dependsrcs} .NOPATH: ${__dependsrcs} .OPTIONAL: ${__dependsrcs} .endif .endif # make(depend) .if empty(CFLAGS_MD) # make sure the .d's are generated/updated ${PROG} ${_LIBS}: ${DEPENDFILE} .endif .ORDER: beforedepend ${DEPENDFILE} afterdepend .if ${.OBJDIR} != ${.CURDIR} __depfiles= *.d .else __depfiles= ${__dependsrcs} .endif DEPCLEANFILES= ${DEPENDFILE} ${__depfiles} y.tab.d *.tmp.d cleandir: cleanautodepend cleanautodepend: ${RM} -f ${DEPCLEANFILES} CLEANFILES+= ${DEPCLEANFILES} .if defined(__dependsrcs) && !empty(__dependsrcs) .if make(depend) || !(make(clean*) || make(destroy*) || make(obj) || make(*install) || make(install-*)) # this ensures we do the right thing if only building a shared or # profiled lib OBJ_EXTENSIONS?=.o .po .so .So MDLIB_SED= -e '/:/s,^\([^\.:]*\)\.[psS]*o,${OBJ_EXTENSIONS:S,^,\1,},' .ifdef NOMD_SED .ifdef LIB MD_SED=sed ${MDLIB_SED} .else MD_SED=cat .endif .else # arrange to put some variable names into ${DEPENDFILE} .ifdef LIB MD_SED=sed ${MDLIB_SED} .else MD_SED=sed .endif SUBST_DEPVARS+= SB TOP BACKING SRC SRCDIR BASE BASEDIR .for v in ${SUBST_DEPVARS} .if defined(${v}) && !empty(${v}) MD_SED+= -e 's,${$v},$${$v},' .endif .endfor .endif .if (${MD_SED} == "sed") MD_SED=cat .endif # this will be done whenever make finishes successfully .if ${MAKE_VERSION:U0:[1]:C/.*-//} < 20050530 .END: .else .END: ${DEPENDFILE} # we do not want to trigger building .d's just use them if they exist ${DEPENDFILE}: ${__dependsrcs:@d@${exists($d):?$d:}@} .endif -@${MD_SED} ${__depfiles} > ${DEPENDFILE}.new 2> /dev/null && \ test -s ${DEPENDFILE}.new && mv ${DEPENDFILE}.new ${DEPENDFILE}; \ ${RM} -f ${DEPENDFILE}.new .endif .endif .else depend: beforedepend afterdepend _SUBDIRUSE .endif .if !target(beforedepend) beforedepend: .endif .if !target(afterdepend) afterdepend: .endif .endif diff --git a/contrib/bmake/mk/compiler.mk b/contrib/bmake/mk/compiler.mk index b20ecaa047e3..83c0cead8f25 100644 --- a/contrib/bmake/mk/compiler.mk +++ b/contrib/bmake/mk/compiler.mk @@ -1,43 +1,43 @@ -# $Id: compiler.mk,v 1.7 2020/08/19 17:51:53 sjg Exp $ +# $Id: compiler.mk,v 1.10 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2019, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .if ${MACHINE} == "common" COMPILER_TYPE = none COMPILER_VERSION = 0 .endif .if empty(COMPILER_TYPE) || empty(COMPILER_VERSION) # gcc does not always say gcc -_v != ${CC} --version 2> /dev/null | \ - egrep -i 'clang|cc|[1-9]\.[0-9]|Free Software Foundation' +_v != (${CC} --version) 2> /dev/null | \ + egrep -i 'clang|cc|[1-9]\.[0-9]|Free Software Foundation'; echo .if empty(COMPILER_TYPE) .if ${_v:Mclang} != "" COMPILER_TYPE = clang -.elif ${_v:M[Gg][Cc][Cc]} != "" || ${_v:MFoundation*} != "" +.elif ${_v:M[Gg][Cc][Cc]} != "" || ${_v:MFoundation*} != "" || ${CC:T:M*gcc*} != "" COMPILER_TYPE = gcc .endif .endif .if empty(COMPILER_VERSION) COMPILER_VERSION != echo "${_v:M[1-9].[0-9]*}:[1]" | \ awk -F. '{print $$1 * 10000 + $$2 * 100 + $$3;}' .endif .undef _v .endif # just in case we don't recognize compiler COMPILER_TYPE ?= unknown COMPILER_VERSION ?= 0 .endif diff --git a/contrib/bmake/mk/dep.mk b/contrib/bmake/mk/dep.mk index b07191a09cbf..ea73846f5fd8 100644 --- a/contrib/bmake/mk/dep.mk +++ b/contrib/bmake/mk/dep.mk @@ -1,127 +1,127 @@ -# $Id: dep.mk,v 1.17 2014/08/04 05:12:27 sjg Exp $ +# $Id: dep.mk,v 1.18 2021/12/08 05:56:50 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN # handle Proc*C as well... .if defined(SRCS) .if !empty(SRCS:M*.pc) .include .endif # it would be nice to be able to query .SUFFIXES OBJ_EXTENSIONS+= .o .po .lo .So # explicit dependencies help short-circuit .SUFFIX searches SRCS_DEP_FILTER+= N*.[hly] .for s in ${SRCS:${SRCS_DEP_FILTER:O:u:ts:}} .for e in ${OBJ_EXTENSIONS:O:u} .if !target(${s:T:R}$e) ${s:T:R}$e: $s .endif .endfor .endfor .endif .if exists(/usr/bin/mkdep) MKDEP_CMD?= mkdep .elif exists(/usr/local/share/bin/mkdeps.sh) MKDEP_CMD?= /usr/local/share/bin/mkdeps.sh -N .endif MKDEP_CMD?= mkdep MKDEP ?= ${MKDEP_CMD} .NOPATH: .depend .if ${MKDEP_MK:Uno} == "auto.dep.mk" && make(depend) # auto.dep.mk does not "do" depend MK_AUTODEP= no .endif .if ${MK_AUTODEP} == yes MKDEP_MK ?= autodep.mk .include <${MKDEP_MK}> .else MKDEP_ENV_VARS += CC CXX .for v in ${MKDEP_ENV_VARS:O:u} .if !empty($v) MKDEP_ENV += $v='${$v}' .endif .endfor _MKDEP = ${MKDEP_ENV} ${MKDEP} # some of the rules involve .h sources, so remove them from mkdep line .if !target(depend) depend: beforedepend .depend _SUBDIRUSE afterdepend .if defined(SRCS) # libs can have too many SRCS for a single command line # so do them one at a time. .depend: ${SRCS} ${.PARSEDIR}/${.PASEFILE} @rm -f .depend .ifdef LIB @files="${.ALLSRC:M*.[sS]}"; \ set -x; for f in $$files; do ${_MKDEP} -a ${MKDEPFLAGS} \ ${CFLAGS:M-[ID]*} ${CPPFLAGS} ${AINC} $$f; done @files="${.ALLSRC:M*.c} ${.ALLSRC:M*.pc:T:.pc=.c}"; \ set -x; for f in $$files; do ${_MKDEP} -a ${MKDEPFLAGS} \ ${CFLAGS:M-[ID]*} ${CPPFLAGS} $$f; done @files="${.ALLSRC:M*.cc} ${.ALLSRC:M*.C} ${.ALLSRC:M*.cxx}"; \ set -x; for f in $$files; do ${_MKDEP} -a ${MKDEPFLAGS} \ ${CXXFLAGS:M-[ID]*} ${CPPFLAGS} $$f; done .else @files="${.ALLSRC:M*.[Ss]}"; \ case "$$files" in *.[Ss]*) \ echo ${_MKDEP} -a ${MKDEPFLAGS} \ ${CFLAGS:M-[ID]*} ${CPPFLAGS} ${AINC} $$files; \ ${_MKDEP} -a ${MKDEPFLAGS} \ ${CFLAGS:M-[ID]*} ${CPPFLAGS} ${AINC} $$files;; \ esac @files="${.ALLSRC:M*.c} ${.ALLSRC:M*.pc:T:.pc=.c}"; \ case "$$files" in *.c*) \ echo ${_MKDEP} -a ${MKDEPFLAGS} \ ${CFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \ ${_MKDEP} -a ${MKDEPFLAGS} \ ${CFLAGS:M-[ID]*} ${CPPFLAGS} $$files;; \ esac @files="${.ALLSRC:M*.cc} ${.ALLSRC:M*.C} ${.ALLSRC:M*.cxx}"; \ case "$$files" in *.[Cc]*) \ echo ${_MKDEP} -a ${MKDEPFLAGS} \ ${CXXFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \ ${_MKDEP} -a ${MKDEPFLAGS} \ ${CXXFLAGS:M-[ID]*} ${CPPFLAGS} $$files;; \ esac .endif .else .depend: .endif .if !target(beforedepend) beforedepend: .endif .if !target(afterdepend) afterdepend: .endif .endif .endif .if !target(tags) .if defined(SRCS) tags: ${SRCS} _SUBDIRUSE -cd ${.CURDIR}; ctags -f /dev/stdout ${.ALLSRC:N*.h} | \ sed "s;\${.CURDIR}/;;" > tags .else tags: .endif .endif .if defined(SRCS) cleandir: cleandepend .if !target(cleandepend) cleandepend: rm -f .depend ${.CURDIR}/tags .endif .endif .endif diff --git a/contrib/bmake/mk/dirdeps.mk b/contrib/bmake/mk/dirdeps.mk index 38ead3de37cd..5e735f236b9f 100644 --- a/contrib/bmake/mk/dirdeps.mk +++ b/contrib/bmake/mk/dirdeps.mk @@ -1,914 +1,919 @@ -# $Id: dirdeps.mk,v 1.140 2021/06/20 23:42:38 sjg Exp $ +# $Id: dirdeps.mk,v 1.147 2021/12/14 02:09:53 sjg Exp $ # Copyright (c) 2010-2021, Simon J. Gerraty # Copyright (c) 2010-2018, Juniper Networks, Inc. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # Much of the complexity here is for supporting cross-building. # If a tree does not support that, simply using plain Makefile.depend # should provide sufficient clue. # Otherwise the recommendation is to use Makefile.depend.${MACHINE} # as expected below. # Note: this file gets multiply included. # This is what we do with DIRDEPS # DIRDEPS: # This is a list of directories - relative to SRCTOP, it is # normally only of interest to .MAKE.LEVEL 0. # In some cases the entry may be qualified with a . # or . suffix (see TARGET_SPEC_VARS below), # for example to force building something for the pseudo # machines "host" or "common" regardless of current ${MACHINE}. # # All unqualified entries end up being qualified with .${TARGET_SPEC} # and partially qualified (if TARGET_SPEC_VARS has multiple # entries) are also expanded to a full .. # The _DIRDEP_USE target uses the suffix to set TARGET_SPEC # correctly when visiting each entry. # # The fully qualified directory entries are used to construct a # dependency graph that will drive the build later. # # Also, for each fully qualified directory target, we will search # using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional # dependencies. We use Makefile.depend (default value for # .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to # distinguish them from others. # # Before each Makefile.depend file is read, we set # DEP_RELDIR to be the RELDIR (path relative to SRCTOP) for # its directory, and DEP_MACHINE etc according to the . # represented by the suffix of the corresponding target. # # Since each Makefile.depend file includes dirdeps.mk, this # processing is recursive and results in .MAKE.LEVEL 0 learning the # dependencies of the tree wrt the initial directory (_DEP_RELDIR). # +# NOTE: given the extent of processing that DIRDEPS undergoes it +# is important that any variables in entries use :U to guard +# against surprises when undefined. +# # TARGET_SPEC_VARS # The default value is just MACHINE, and for most environments # this is sufficient. The _DIRDEP_USE target actually sets # both MACHINE and TARGET_SPEC to the suffix of the current # target so that in the general case TARGET_SPEC can be ignored. # # If more than MACHINE is needed then sys.mk needs to decompose # TARGET_SPEC and set the relevant variables accordingly. # It is important that MACHINE be included in and actually be # the first member of TARGET_SPEC_VARS. This allows other # variables to be considered optional, and some of the treatment # below relies on MACHINE being the first entry. # Note: TARGET_SPEC cannot contain any '.'s so the target # triple used by compiler folk won't work (directly anyway). # # For example: # # # Always list MACHINE first, # # other variables might be optional. # TARGET_SPEC_VARS = MACHINE TARGET_OS # .if ${TARGET_SPEC:Uno:M*,*} != "" # _tspec := ${TARGET_SPEC:S/,/ /g} # MACHINE := ${_tspec:[1]} # TARGET_OS := ${_tspec:[2]} # # etc. # # We need to stop that TARGET_SPEC affecting any submakes # # and deal with MACHINE=${TARGET_SPEC} in the environment. # TARGET_SPEC = # # export but do not track # .export-env TARGET_SPEC # .export ${TARGET_SPEC_VARS} # .for v in ${TARGET_SPEC_VARS:O:u} # .if empty($v) # .undef $v # .endif # .endfor # .endif # # make sure we know what TARGET_SPEC is # # as we may need it to find Makefile.depend* # TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} # # The following variables can influence the initial DIRDEPS # computation with regard to the TARGET_SPECs that will be # built. # Most should also be considered by init.mk # # ONLY_TARGET_SPEC_LIST # Defines a list of TARGET_SPECs for which the current # directory can be built. # If ALL_MACHINES is defined, we build for all the # TARGET_SPECs listed. # # ONLY_MACHINE_LIST # As for ONLY_TARGET_SPEC_LIST but only specifies # MACHINEs. # # NOT_TARGET_SPEC_LIST # A list of TARGET_SPECs for which the current # directory should not be built. # # NOT_MACHINE_LIST # A list of MACHINEs the current directory should not be # built for. # # _build_xtra_dirs # local.dirdeps.mk can add targets to this variable. # They will be hooked into the build, but independent of # any other DIRDEP. # # This allows for adding TESTS to the build, such that the build # if any test fails, but without the risk of introducing # circular dependencies. now_utc ?= ${%s:L:gmtime} .if !defined(start_utc) start_utc := ${now_utc} .endif .if !target(bootstrap) && (make(bootstrap) || \ make(bootstrap-this) || \ make(bootstrap-recurse) || \ make(bootstrap-empty)) # disable most of below .MAKE.LEVEL = 1 .endif # touch this at your peril _DIRDEP_USE_LEVEL?= 0 .if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL} # only the first instance is interested in all this .if !target(_DIRDEP_USE) # do some setup we only need once _CURDIR ?= ${.CURDIR} _OBJDIR ?= ${.OBJDIR} .if ${MAKEFILE:T} == ${.PARSEFILE} && empty(DIRDEPS) && ${.TARGETS:Uall:M*/*} != "" # This little trick let's us do # # mk -f dirdeps.mk some/dir.${TARGET_SPEC} # all: ${.TARGETS:Nall}: all DIRDEPS := ${.TARGETS:M*[/.]*} # so that -DNO_DIRDEPS works DEP_RELDIR := ${DIRDEPS:[1]:R} # this will become DEP_MACHINE below TARGET_MACHINE := ${DIRDEPS:[1]:E:C/,.*//} .if ${TARGET_MACHINE:N*/*} == "" TARGET_MACHINE := ${MACHINE} .endif # disable DIRDEPS_CACHE as it does not like this trick MK_DIRDEPS_CACHE = no .endif # make sure we get the behavior we expect .MAKE.SAVE_DOLLARS = no # make sure these are empty to start with _DEP_TARGET_SPEC = # If TARGET_SPEC_VARS is other than just MACHINE # it should be set by sys.mk or similar by now. # TARGET_SPEC must not contain any '.'s. TARGET_SPEC_VARS ?= MACHINE # this is what we started with TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,} # this is what we mostly use below DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,} # make sure we have defaults .for v in ${TARGET_SPEC_VARS} DEP_$v ?= ${$v} .endfor .if ${TARGET_SPEC_VARS:[#]} > 1 # Ok, this gets more complex (putting it mildly). # In order to stay sane, we need to ensure that all the build_dirs # we compute below are fully qualified wrt DEP_TARGET_SPEC. # The makefiles may only partially specify (eg. MACHINE only), # so we need to construct a set of modifiers to fill in the gaps. .if ${MAKE_VERSION} >= 20170130 _tspec_x := ${TARGET_SPEC_VARS:range} .else # do it the hard way _tspec_x := ${TARGET_SPEC_VARS:[#]:@x@i=1;while [ $$i -le $x ]; do echo $$i; i=$$((i + 1)); done;@:sh} .endif # this handles unqualified entries M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC}; # there needs to be at least one item missing for these to make sense .for i in ${_tspec_x:[2..-1]} _tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,} _tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,} M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i}; .endfor TARGET_SPEC_VARSr := ${TARGET_SPEC_VARS:[-1..1]} .else # A harmless? default. M_dep_qual_fixes = U .endif .if !defined(.MAKE.DEPENDFILE_PREFERENCE) # .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater? # you really want this set by sys.mk or similar .MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T} .if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}" .if ${TARGET_SPEC} != ${MACHINE} .MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE} .endif .MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R} .endif .endif _default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T} _machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*} # for machine specific dependfiles we require ${MACHINE} to be at the end # also for the sake of sanity we require a common prefix .if !defined(.MAKE.DEPENDFILE_PREFIX) # knowing .MAKE.DEPENDFILE_PREFIX helps .if !empty(_machine_dependfiles) .MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R} .else .MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T} .endif .endif # this is how we identify non-machine specific dependfiles N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}} .endif # !target(_DIRDEP_USE) # First off, we want to know what ${MACHINE} to build for. # This can be complicated if we are using a mixture of ${MACHINE} specific # and non-specific Makefile.depend* # if we were included recursively _DEP_TARGET_SPEC should be valid. .if empty(_DEP_TARGET_SPEC) DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}} _DEP_TARGET_SPEC := ${DEP_TARGET_SPEC} .if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" # record that we've read dependfile for this _dirdeps_checked.${_CURDIR}.${TARGET_SPEC}: .endif .endif # by now _DEP_TARGET_SPEC should be set, parse it. .if ${TARGET_SPEC_VARS:[#]} > 1 # we need to parse DEP_MACHINE may or may not contain more info _tspec := ${_DEP_TARGET_SPEC:S/,/ /g} .for i in ${_tspec_x} DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]} .endfor .for v in ${TARGET_SPEC_VARS:O:u} .if empty(DEP_$v) .undef DEP_$v .endif .endfor .else DEP_MACHINE := ${_DEP_TARGET_SPEC} .endif # reset each time through _build_all_dirs = _build_xtra_dirs = # the first time we are included the _DIRDEP_USE target will not be defined # we can use this as a clue to do initialization and other one time things. .if !target(_DIRDEP_USE) # make sure this target exists dirdeps: beforedirdeps .WAIT beforedirdeps: # We normally expect to be included by Makefile.depend.* # which sets the DEP_* macros below. DEP_RELDIR ?= ${RELDIR} # this can cause lots of output! # set to a set of glob expressions that might match RELDIR DEBUG_DIRDEPS ?= no # remember the initial value of DEP_RELDIR - we test for it below. _DEP_RELDIR := ${DEP_RELDIR} .endif # DIRDEPS_CACHE can be very handy for debugging. # Also if repeatedly building the same target, # we can avoid the overhead of re-computing the tree dependencies. MK_DIRDEPS_CACHE ?= no BUILD_DIRDEPS_CACHE ?= no BUILD_DIRDEPS ?= yes .if ${MK_DIRDEPS_CACHE} == "yes" # this is where we will cache all our work DIRDEPS_CACHE ?= ${_OBJDIR:tA}/dirdeps.cache${_TARGETS:U${.TARGETS}:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.} .endif .if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != "" _debug_reldir = 1 .else _debug_reldir = 0 .endif .if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend:L:M$x}@} != "" _debug_search = 1 .else _debug_search = 0 .endif # pickup customizations # as below you can use !target(_DIRDEP_USE) to protect things # which should only be done once. .-include .if !target(_DIRDEP_USE) # things we skip for host tools SKIP_HOSTDIR ?= NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}} # things we always skip # SKIP_DIRDEPS allows for adding entries on command line. SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS} SKIP_DIR.host += ${SKIP_HOSTDIR} DEP_SKIP_DIR = ${SKIP_DIR} \ ${SKIP_DIR.${DEP_TARGET_SPEC}:U} \ ${TARGET_SPEC_VARS:@v@${SKIP_DIR.${DEP_$v}:U}@} \ ${SKIP_DIRDEPS.${DEP_TARGET_SPEC}:U} \ ${TARGET_SPEC_VARS:@v@${SKIP_DIRDEPS.${DEP_$v}:U}@} NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}} .if defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS) NO_DIRDEPS = .elif defined(WITHOUT_DIRDEPS_BELOW) NO_DIRDEPS_BELOW = .endif .if defined(NO_DIRDEPS) # confine ourselves to the original dir and below. DIRDEPS_FILTER += M${_DEP_RELDIR}* .elif defined(NO_DIRDEPS_BELOW) DIRDEPS_FILTER += M${_DEP_RELDIR} .endif # this is what we run below DIRDEP_MAKE ?= ${.MAKE} DIRDEP_DIR ?= ${.TARGET:R} # if you want us to report load averages during build # DIRDEP_USE_PRELUDE += ${DIRDEP_LOADAVG_REPORT}; DIRDEP_LOADAVG_CMD ?= ${UPTIME:Uuptime} | sed 's,.*\(load\),\1,' DIRDEP_LOADAVG_LAST = 0 # yes the expression here is a bit complicated, # the trick is to only eval ${DIRDEP_LOADAVG_LAST::=${now_utc}} # when we want to report. # Note: expr(1) will exit 1 if the expression evaluates to 0 # hence the || true DIRDEP_LOADAVG_REPORT = \ test -z "${"${expr ${now_utc} - ${DIRDEP_LOADAVG_INTEVAL:U60} - ${DIRDEP_LOADAVG_LAST} || true:L:sh:N-*}":?yes${DIRDEP_LOADAVG_LAST::=${now_utc}}:}" || \ echo "${TRACER}`${DIRDEP_LOADAVG_CMD}`" # we suppress SUBDIR when visiting the leaves # we assume sys.mk will set MACHINE_ARCH # you can add extras to DIRDEP_USE_ENV # if there is no makefile in the target directory, we skip it. _DIRDEP_USE: .USE .MAKE @for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \ test -s ${.TARGET:R}/$$m || continue; \ - echo "${TRACER}Checking ${.TARGET:S,${SRCTOP}/,,} for ${.TARGET:E} ..."; \ + echo "${TRACER}Checking ${.TARGET:S,^${SRCTOP}/,,} for ${.TARGET:E} ..."; \ ${DIRDEP_USE_PRELUDE} \ MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \ TARGET_SPEC=${.TARGET:E} \ MACHINE=${.TARGET:E} \ ${DIRDEP_MAKE} -C ${DIRDEP_DIR} || exit 1; \ break; \ done .ifdef ALL_MACHINES .if empty(ONLY_TARGET_SPEC_LIST) && empty(ONLY_MACHINE_LIST) # we start with everything _machine_list != echo; 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}* 2> /dev/null # some things we know we want to ignore DIRDEPS_TARGETS_SKIP_LIST += \ *~ \ *.bak \ *.inc \ *.old \ *.options \ *.orig \ *.rej \ # first trim things we know we want to skip # and provide canonical form _machine_list := ${_machine_list:${DIRDEPS_TARGETS_SKIP_LIST:${M_ListToSkip}}:T:E} # cater for local complexities # local.dirdeps.mk can set # DIRDEPS_ALL_MACHINES_FILTER and # DIRDEPS_ALL_MACHINES_FILTER_XTRAS for final tweaks .if !empty(ALL_TARGET_SPEC_LIST) .if ${_debug_reldir} .info ALL_TARGET_SPEC_LIST=${ALL_TARGET_SPEC_LIST} .endif DIRDEPS_ALL_MACHINES_FILTER += \ @x@$${ALL_TARGET_SPEC_LIST:@s@$${x:M$$s}@}@ .elif !empty(ALL_MACHINE_LIST) .if ${_debug_reldir} .info ALL_MACHINE_LIST=${ALL_MACHINE_LIST} .endif .if ${TARGET_SPEC_VARS:[#]} > 1 # the space below can result in extraneous ':' DIRDEPS_ALL_MACHINES_FILTER += \ @x@$${ALL_MACHINE_LIST:@m@$${x:M$$m,*} $${x:M$$m}@}@ .else DIRDEPS_ALL_MACHINES_FILTER += \ @x@$${ALL_MACHINE_LIST:@m@$${x:M$$m}@}@ .endif .endif # add local XTRAS - default to something benign DIRDEPS_ALL_MACHINES_FILTER += \ ${DIRDEPS_ALL_MACHINES_FILTER_XTRAS:UNbak} .if ${_debug_reldir} .info _machine_list=${_machine_list} .info DIRDEPS_ALL_MACHINES_FILTER=${DIRDEPS_ALL_MACHINES_FILTER} .endif _only_machines := ${_machine_list:${DIRDEPS_ALL_MACHINES_FILTER:ts:}:S,:, ,g} .else _only_machines := ${ONLY_TARGET_SPEC_LIST:U} ${ONLY_MACHINE_LIST:U} .endif .if empty(_only_machines) # we must be boot-strapping _only_machines := ${TARGET_MACHINE:U${ALL_TARGET_SPEC_LIST:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}}} .endif # cleanup the result _only_machines := ${_only_machines:O:u} .if ${_debug_reldir} .info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: ALL_MACHINES _only_machines=${_only_machines} .endif .else # ! ALL_MACHINES # if ONLY_TARGET_SPEC_LIST or ONLY_MACHINE_LIST is set, we are limited to that. # Note that ONLY_TARGET_SPEC_LIST should be fully qualified. # if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST # otherwise DEP_MACHINE is it - so DEP_MACHINE will match. _only_machines := ${ONLY_TARGET_SPEC_LIST:U:M${DEP_MACHINE},*} .if empty(_only_machines) _only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}} .endif .endif .if !empty(NOT_MACHINE_LIST) _only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}} .endif .if !empty(NOT_TARGET_SPEC_LIST) # we must first qualify _dm := ${DEP_MACHINE} _only_machines := ${_only_machines:M*,*} ${_only_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,} DEP_MACHINE := ${_dm} _only_machines := ${_only_machines:${NOT_TARGET_SPEC_LIST:${M_ListToSkip}}} .endif # clean up _only_machines := ${_only_machines:O:u} .if ${_debug_reldir} .info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _only_machines=${_only_machines} .endif # make sure we have a starting place? DIRDEPS ?= ${RELDIR} .endif # target .if !defined(NO_DIRDEPS) && !defined(NO_DIRDEPS_BELOW) .if ${MK_DIRDEPS_CACHE} == "yes" # just ensure this exists build-dirdeps: M_oneperline = @x@\\${.newline} $$x@ .if ${BUILD_DIRDEPS_CACHE} == "no" .if !target(dirdeps-cached) # we do this via sub-make BUILD_DIRDEPS = no # ignore anything but these .MAKE.META.IGNORE_FILTER = M*/${.MAKE.DEPENDFILE_PREFIX}* dirdeps: dirdeps-cached dirdeps-cached: ${DIRDEPS_CACHE} .MAKE @echo "${TRACER}Using ${DIRDEPS_CACHE}" @MAKELEVEL=${.MAKE.LEVEL} ${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \ dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no # leaf makefiles rarely work for building DIRDEPS_CACHE .if ${RELDIR} != "." BUILD_DIRDEPS_MAKEFILE ?= -f dirdeps.mk .endif # these should generally do BUILD_DIRDEPS_MAKEFILE ?= BUILD_DIRDEPS_TARGETS ?= ${.TARGETS} .if ${DIRDEPS_CACHE} != ${STATIC_DIRDEPS_CACHE:Uno} && ${DIRDEPS_CACHE:M${SRCTOP}/*} == "" # export this for dirdeps-cache-update.mk DYNAMIC_DIRDEPS_CACHE := ${DIRDEPS_CACHE} .export DYNAMIC_DIRDEPS_CACHE # we need the .meta file to ensure we update if # any of the Makefile.depend* changed. # We do not want to compare the command line though. ${DIRDEPS_CACHE}: .META .NOMETA_CMP +@{ echo '# Autogenerated - do NOT edit!'; echo; \ echo 'BUILD_DIRDEPS=no'; echo; \ echo '.include '; echo; \ } > ${.TARGET}.new +@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \ DIRDEPS="${DIRDEPS}" \ TARGET_SPEC=${TARGET_SPEC} \ MAKEFLAGS= ${DIRDEP_CACHE_MAKE:U${.MAKE}} -C ${_CURDIR} \ ${BUILD_DIRDEPS_MAKEFILE} \ ${BUILD_DIRDEPS_TARGETS} BUILD_DIRDEPS_CACHE=yes \ .MAKE.DEPENDFILE=.none \ ${"${DEBUG_DIRDEPS:Nno}":?DEBUG_DIRDEPS='${DEBUG_DIRDEPS}':} \ ${.MAKEFLAGS:tW:S,-D ,-D,g:tw:M*WITH*} \ ${.MAKEFLAGS:tW:S,-d ,-d,g:tw:M-d*} \ - 3>&1 1>&2 | sed 's,${SRCTOP},$${SRCTOP},g;s,_{,$${,g' >> ${.TARGET}.new && \ + 3>&1 1>&2 | sed 's,${SRCTOP},_{SRCTOP},g;s,_{,$${,g' >> ${.TARGET}.new && \ mv ${.TARGET}.new ${.TARGET} .endif .endif .elif !target(_count_dirdeps) # we want to capture the dirdeps count in the cache .END: _count_dirdeps _count_dirdeps: .NOMETA @{ echo; echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS}'; } >&3 .endif .elif !make(dirdeps) && !target(_count_dirdeps) beforedirdeps: _count_dirdeps _count_dirdeps: .NOMETA @echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS} seconds=`expr ${now_utc} - ${start_utc}`" .endif .endif .if ${BUILD_DIRDEPS} == "yes" # the rest is done repeatedly for every Makefile.depend we read. # if we are anything but the original dir we care only about the # machine type we were included for.. .if ${DEP_RELDIR} == "." _this_dir := ${SRCTOP} .else _this_dir := ${SRCTOP}/${DEP_RELDIR} .endif # on rare occasions, there can be a need for extra help _dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc .-include <${_dep_hack}> .-include <${_dep_hack:R}.options> .if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC} # this should be all _machines := ${DEP_MACHINE} .else # this is the machine list we actually use below _machines := ${_only_machines} .if defined(HOSTPROG) || ${DEP_MACHINE:Nhost*} == "" # we need to build this guy's dependencies for host as well. .if ${DEP_MACHINE:Nhost*} == "" _machines += ${DEP_MACHINE} .else _machines += host .endif .endif _machines := ${_machines:O:u} .endif .if ${TARGET_SPEC_VARS:[#]} > 1 # we need to tweak _machines _dm := ${DEP_MACHINE} # apply the same filtering that we do when qualifying DIRDEPS. # M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.' # Again we expect that any already qualified machines are fully qualified. _machines := ${_machines:M*,*} ${_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,} DEP_MACHINE := ${_dm} _machines := ${_machines:O:u} .endif # reset each time through _build_dirs = .if ${DEP_RELDIR} == ${_DEP_RELDIR} # pickup other machines for this dir if necessary _build_dirs += ${_machines:@m@${_CURDIR}.$m@} .endif .if ${_debug_reldir} +.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: nDIRDEPS=${DIRDEPS:[#]} .info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}' .info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}' .endif .if !empty(DIRDEPS) # these we reset each time through as they can depend on DEP_MACHINE DEP_DIRDEPS_FILTER = \ ${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \ ${TARGET_SPEC_VARS:@v@${DIRDEPS_FILTER.${DEP_$v}:U}@} \ ${DIRDEPS_FILTER:U} .if empty(DEP_DIRDEPS_FILTER) # something harmless DEP_DIRDEPS_FILTER = U .endif # this is what we start with __depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@} -# some entries may be qualified with . -# the :M*/*/*.* just tries to limit the dirs we check to likely ones. -# the ${d:E:M*/*} ensures we don't consider junos/usr.sbin/mgd -__qual_depdirs := ${__depdirs:M*/*/*.*:@d@${exists($d):?:${"${d:E:M*/*}":?:${exists(${d:R}):?$d:}}}@} -__unqual_depdirs := ${__depdirs:${__qual_depdirs:Uno:${M_ListToSkip}}} +# some entries may be qualified with . or . +# we can tell the unqualified ones easily - because they exist +__unqual_depdirs := ${__depdirs:@d@${exists($d):?$d:}@} +__qual_depdirs := ${__depdirs:${__unqual_depdirs:Uno:${M_ListToSkip}}} .if ${DEP_RELDIR} == ${_DEP_RELDIR} # if it was called out - we likely need it. __hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@} \ ${DPADD:U.:M${HOST_OBJTOP32:Uno}/*:S,${HOST_OBJTOP32:Uno}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host32,:N.*:@d@${SRCTOP}/$d@} __qual_depdirs += ${__hostdpadd} .endif .if ${_debug_reldir} .info DEP_DIRDEPS_FILTER=${DEP_DIRDEPS_FILTER:ts:} -.info depdirs=${__depdirs} -.info qualified=${__qual_depdirs} -.info unqualified=${__unqual_depdirs} +.info depdirs=${__depdirs:S,^${SRCTOP}/,,} +.info qualified=${__qual_depdirs:S,^${SRCTOP}/,,} +.info unqualified=${__unqual_depdirs:S,^${SRCTOP}/,,} .endif # _build_dirs is what we will feed to _DIRDEP_USE _build_dirs += \ ${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \ ${__qual_depdirs:N*.host} \ ${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \ ${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@} # qualify everything now _build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u} .endif # empty DIRDEPS _build_all_dirs += ${_build_dirs} ${_build_xtra_dirs} _build_all_dirs := ${_build_all_dirs:O:u} # Normally if doing make -V something, # we do not want to waste time chasing DIRDEPS # but if we want to count the number of Makefile.depend* read, we do. -.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS}} == "" +.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS:U}} == "" .if !empty(_build_all_dirs) .if ${BUILD_DIRDEPS_CACHE} == "yes" x!= echo; { echo; echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}'; } >&3 # guard against _new_dirdeps being too big for a single command line -_new_dirdeps := ${_build_all_dirs:@x@${target($x):?:$x}@} -.export _build_xtra_dirs _new_dirdeps +_new_dirdeps := ${_build_all_dirs:@x@${target($x):?:$x}@:S,^${SRCTOP}/,,} +_cache_xtra_deps := ${_build_xtra_dirs:S,^${SRCTOP}/,,} +.export _cache_xtra_deps _new_dirdeps .if !empty(DEP_EXPORT_VARS) # Discouraged, but there are always exceptions. # Handle it here rather than explain how. x!= echo; { echo; ${DEP_EXPORT_VARS:@v@echo '$v=${$v}';@} echo '.export ${DEP_EXPORT_VARS}'; echo; } >&3 .endif .else # this makes it all happen dirdeps: ${_build_all_dirs} .endif ${_build_all_dirs}: _DIRDEP_USE .if ${_debug_reldir} -.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs} +.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs:S,^${SRCTOP}/,,} .endif .if !empty(DEP_EXPORT_VARS) .export ${DEP_EXPORT_VARS} DEP_EXPORT_VARS= .endif # this builds the dependency graph .for m in ${_machines} .if ${BUILD_DIRDEPS_CACHE} == "yes" && !empty(_build_dirs) -x!= echo; { echo; echo 'DIRDEPS.${_this_dir}.$m = \'; } >&3 _cache_deps = +x!= echo; { echo; echo 'DIRDEPS.${_this_dir}.$m = \'; } >&3 .endif # it would be nice to do :N${.TARGET} .if !empty(__qual_depdirs) .for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m} .if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != "" -.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q} +.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q:S,^${SRCTOP}/,,} .endif .if ${BUILD_DIRDEPS_CACHE} == "yes" -_cache_deps += ${_build_dirs:M*.$q} +_cache_deps += ${_build_dirs:M*.$q:S,^${SRCTOP}/,,} .else ${_this_dir}.$m: ${_build_dirs:M*.$q} .endif .endfor .endif .if ${_debug_reldir} -.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m} +.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,} .endif .if ${BUILD_DIRDEPS_CACHE} == "yes" .if !empty(_build_dirs) -_cache_deps += ${_build_dirs:M*.$m:N${_this_dir}.$m} +_cache_deps += ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,} .if !empty(_cache_deps) .export _cache_deps -x!= echo; for x in $$_cache_deps; do echo " $$x \\"; done >&3 +x!= echo; for x in $$_cache_deps; do echo " _{SRCTOP}/$$x \\"; done >&3 .endif -# anything in _build_xtra_dirs is hooked to dirdeps: only +# anything in _{build,env}_xtra_dirs is hooked to dirdeps: only x!= echo; { echo; echo '${_this_dir}.$m: $${DIRDEPS.${_this_dir}.$m}'; \ echo; echo 'dirdeps: ${_this_dir}.$m \'; \ - for x in $$_build_xtra_dirs; do echo " $$x \\"; done; \ - echo; for x in $$_new_dirdeps; do echo "$$x: _DIRDEP_USE"; done; } >&3 + for x in $$_cache_xtra_deps; do echo " _{SRCTOP}/$$x \\"; done; \ + echo; for x in $$_new_dirdeps; do echo "_{SRCTOP}/$$x: _DIRDEP_USE"; done; } >&3 .endif .else ${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m} .endif .endfor .endif # Now find more dependencies - and recurse. .for d in ${_build_all_dirs} .if !target(_dirdeps_checked.$d) # once only _dirdeps_checked.$d: .if ${_debug_search} -.info checking $d +.info checking ${d:S,^${SRCTOP}/,,} .endif # Note: _build_all_dirs is fully qualifed so d:R is always the directory .if exists(${d:R}) # we pass _DEP_TARGET_SPEC to tell the next step what we want _DEP_TARGET_SPEC := ${d:E} # some makefiles may still look at this _DEP_MACHINE := ${d:E:C/,.*//} # set these too in case Makefile.depend* uses them .if ${TARGET_SPEC_VARS:[#]} > 1 _dtspec := ${_DEP_TARGET_SPEC:S/,/ /g} .for i in ${_tspec_x} DEP_${TARGET_SPEC_VARS:[$i]} := ${_dtspec:[$i]} .endfor .else DEP_MACHINE := ${_DEP_MACHINE} .endif # Warning: there is an assumption here that MACHINE is always # the first entry in TARGET_SPEC_VARS. # If TARGET_SPEC and MACHINE are insufficient, you have a problem. _m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:C;${MACHINE}((,.+)?)$;${d:E:C/,.*//}\1;:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]} .if !empty(_m) # M_dep_qual_fixes isn't geared to Makefile.depend _qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes:ts:}} .if ${_debug_search} .info Looking for ${_qm} .endif # set this "just in case" # we can skip :tA since we computed the path above -DEP_RELDIR := ${_m:H:S,${SRCTOP}/,,} +DEP_RELDIR := ${_m:H:S,^${SRCTOP}/,,} # and reset this DIRDEPS = .if ${_debug_reldir} && ${_qm} != ${_m} .info loading ${_m} for ${d:E} .endif .include <${_m}> .else .-include .endif .endif .endif .endfor .endif # -V .endif # BUILD_DIRDEPS .elif ${.MAKE.LEVEL} > 42 .error You should have stopped recursing by now. .else # we are building something DEP_RELDIR := ${RELDIR} _DEP_RELDIR := ${RELDIR} # Since we are/should be included by .MAKE.DEPENDFILE # This is a final opportunity to add/hook global rules. .-include # skip _reldir_{finish,failed} if not included from Makefile.depend* # or not in meta mode .if !defined(WITHOUT_META_STATS) && ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" && ${.MAKE.MODE:Mmeta} != "" meta_stats= meta=${empty(.MAKE.META.FILES):?0:${.MAKE.META.FILES:[#]}} \ created=${empty(.MAKE.META.CREATED):?0:${.MAKE.META.CREATED:[#]}} .if !target(_reldir_finish) .END: _reldir_finish _reldir_finish: .NOMETA @echo "${TRACER}Finished ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" .endif .if !target(_reldir_failed) .ERROR: _reldir_failed _reldir_failed: .NOMETA @echo "${TRACER}Failed ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" .endif .endif # pickup local dependencies .if ${MAKE_VERSION} < 20160220 .-include <.depend> .else .dinclude <.depend> .endif .endif # bootstrapping new dependencies made easy? .if !target(bootstrap-empty) .if !target(bootstrap) && (make(bootstrap) || \ make(bootstrap-this) || \ make(bootstrap-recurse) || \ make(bootstrap-empty)) # if we are bootstrapping create the default _want = ${.CURDIR}/${.MAKE.DEPENDFILE_DEFAULT:T} .if exists(${_want}) # stop here ${.TARGETS:Mboot*}: .elif !make(bootstrap-empty) # find a Makefile.depend to use as _src _src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo .if empty(_src) .error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}${.newline}Use: bootstrap-empty .endif _src?= ${.MAKE.DEPENDFILE} .MAKE.DEPENDFILE_BOOTSTRAP_SED+= -e 's/${_src:E:C/,.*//}/${MACHINE}/g' # just create Makefile.depend* for this dir bootstrap-this: .NOTMAIN @echo Bootstrapping ${RELDIR}/${_want:T} from ${_src:T}; \ echo You need to build ${RELDIR} to correctly populate it. .if ${_src:T} != ${.MAKE.DEPENDFILE_PREFIX:T} (cd ${.CURDIR} && sed ${.MAKE.DEPENDFILE_BOOTSTRAP_SED} ${_src} > ${_want:T}) .else cp ${.CURDIR}/${_src:T} ${_want} .endif # create Makefile.depend* for this dir and its dependencies bootstrap: bootstrap-recurse bootstrap-recurse: bootstrap-this _mf := ${.PARSEFILE} bootstrap-recurse: .NOTMAIN .MAKE @cd ${SRCTOP} && \ for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \ test -d $$d || d=$${d%.*}; \ test -d $$d || continue; \ echo "Checking $$d for bootstrap ..."; \ (cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \ done .endif # create an empty Makefile.depend* to get the ball rolling. bootstrap-empty: .NOTMAIN .NOMETA @echo Creating empty ${RELDIR}/${_want:T}; \ echo You need to build ${RELDIR} to correctly populate it. @{ echo DIRDEPS=; echo ".include "; } > ${_want} .endif .endif diff --git a/contrib/bmake/mk/doc.mk b/contrib/bmake/mk/doc.mk index b6ebd8ad3d3e..06dd517473ca 100644 --- a/contrib/bmake/mk/doc.mk +++ b/contrib/bmake/mk/doc.mk @@ -1,64 +1,64 @@ -# $Id: doc.mk,v 1.7 2019/06/09 16:22:08 sjg Exp $ +# $Id: doc.mk,v 1.8 2021/12/08 05:56:50 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .include BIB?= bib EQN?= eqn GREMLIN?= grn GRIND?= vgrind -f INDXBIB?= indxbib PIC?= pic REFER?= refer ROFF?= groff -M/usr/share/tmac ${MACROS} ${PAGES} SOELIM?= soelim TBL?= tbl .PATH: ${.CURDIR} .if !defined(_SKIP_BUILD) realbuild: paper.ps .endif .if !target(paper.ps) paper.ps: ${SRCS} ${ROFF} ${SRCS} > ${.TARGET} .endif .if !target(print) print: paper.ps lpr -P${PRINTER} paper.ps .endif .if !target(manpages) manpages: .endif .if !target(obj) obj: .endif clean cleandir: rm -f paper.* [eE]rrs mklog ${CLEANFILES} .if ${MK_DOC} == "no" install: .else FILES?= ${SRCS} install: test -d ${DESTDIR}${DOCDIR}/${DIR} || \ ${INSTALL} -d ${DOC_INSTALL_OWN} -m ${DIRMODE} ${DESTDIR}${DOCDIR}/${DIR} ${INSTALL} ${COPY} ${DOC_INSTALL_OWN} -m ${DOCMODE} \ Makefile ${FILES} ${EXTRA} ${DESTDIR}${DOCDIR}/${DIR} .endif spell: ${SRCS} spell ${SRCS} | sort | comm -23 - spell.ok > paper.spell .if !empty(DOCOWN) DOC_INSTALL_OWN?= -o ${DOCOWN} -g ${DOCGRP} .endif .endif diff --git a/contrib/bmake/mk/dpadd.mk b/contrib/bmake/mk/dpadd.mk index aef12528f163..07528f9e926c 100644 --- a/contrib/bmake/mk/dpadd.mk +++ b/contrib/bmake/mk/dpadd.mk @@ -1,340 +1,340 @@ -# $Id: dpadd.mk,v 1.29 2021/04/20 02:30:44 sjg Exp $ +# $Id: dpadd.mk,v 1.30 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2004, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # ## # DESCRIPTION: # This makefile manages a number of variables that simplify # dealing with libs in a build. # # Primary inputs are DPLIBS, DPADD and SRC_LIBS: # # DPLIBS # List of LIB* that we will actually link with # should be in correct link order. # DPLIBS is a short-cut to ensure that DPADD and LDADD are # kept in sync. # # DPADD List of LIB* that should already be built. # # SRC_LIBS # List of LIB* that we want headers from, we do *not* # require that such libs have been built. # # The above all get added to DPMAGIC_LIBS which is what we # process. # # We expect LIB* to be set to absolute path of a library - # suitable for putting in DPADD. # eg. # # LIBC ?= ${OBJTOP}/lib/libc/libc.a # # From such a path we can derrive a number of other variables # for which we can supply sensible default values. # We name all these variables for the basename of the library # (libc in our example above -- ${__lib:T:R} in below): # # LDADD_${__lib:T:R}: # What should be added to LDADD (eg -lc) # # OBJ_${__lib:T:R}: # This is trivial - just the dirname of the built library. # # SRC_${__lib:T:R}: # Where the src for ${__lib} is, if LIB* is set as above # we can simply substitute ${SRCTOP} for ${OBJTOP} in # the dirname. # # INCLUDES_${__lib:T:R}: # What should be added to CFLAGS # # If the directory ${SRC_${__lib:T:R}}/h exists we will # only add -I${SRC_${__lib:T:R}}/h on the basis that # this is where the public api is kept. # # Otherwise default will be -I${OBJ_${__lib:T:R}} # -I${SRC_${__lib:T:R}} # # Note much of the above is skipped for staged libs # eg. # LIBC ?= ${STAGE_OBJTOP}/usr/lib/libc.a # # Since we can safely assume that -I${STAGE_OBJTOP}/usr/include # and -L${STAGE_OBJTOP}/usr/lib are sufficient, and we should # have no need of anything else. # .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN # sometimes we play games with .CURDIR etc # _* hold the original values of .* _OBJDIR?= ${.OBJDIR} _CURDIR?= ${.CURDIR} .if ${_CURDIR} == ${SRCTOP} RELDIR=. RELTOP=. .else RELDIR?= ${_CURDIR:S,${SRCTOP}/,,} .if ${RELDIR} == ${_CURDIR} RELDIR?= ${_OBJDIR:S,${OBJTOP}/,,} .endif RELTOP?= ${RELDIR:C,[^/]+,..,g} .endif RELOBJTOP?= ${OBJTOP} RELSRCTOP?= ${SRCTOP} # we get included just about everywhere so this is handy... # C*DEBUG_XTRA are for defining on cmd line etc # so do not use in makefiles. .ifdef CFLAGS_DEBUG_XTRA CFLAGS_LAST += ${CFLAGS_DEBUG_XTRA} .endif .ifdef CXXFLAGS_DEBUG_XTRA CXXFLAGS_LAST += ${CXXFLAGS_DEBUG_XTRA} .endif .-include # DPLIBS helps us ensure we keep DPADD and LDADD in sync DPLIBS+= ${DPLIBS_LAST} DPADD+= ${DPLIBS:N-*} .for __lib in ${DPLIBS} .if "${__lib:M-*}" != "" LDADD += ${__lib} .else LDADD += ${LDADD_${__lib:T:R}:U${__lib:T:R:S/lib/-l/:C/\.so.*//}} .endif .endfor # DPADD can contain things other than libs __dpadd_libs := ${DPADD:M*/lib*} .if defined(PROG) && ${MK_PROG_LDORDER_MK:Uno} != "no" # some libs have dependencies... # DPLIBS_* allows bsd.libnames.mk to flag libs which must be included # in DPADD for a given library. # Gather all such dependencies into __ldadd_all_xtras # dups will be dealt with later. # Note: libfoo_pic uses DPLIBS_libfoo __ldadd_all_xtras= .for __lib in ${__dpadd_libs:@d@${DPLIBS_${d:T:R:S,_pic,,}}@} __ldadd_all_xtras+= ${LDADD_${__lib}:U${__lib:T:R:S/lib/-l/:C/\.so.*//}} .if "${DPADD:M${__lib}}" == "" DPADD+= ${__lib} .endif .endfor .endif # Last of all... for libc and libgcc DPADD+= ${DPADD_LAST} # de-dupuplicate __ldadd_all_xtras into __ldadd_xtras # in reverse order so that libs end up listed after all that needed them. __ldadd_xtras= .for __lib in ${__ldadd_all_xtras:[-1..1]} .if "${__ldadd_xtras:M${__lib}}" == "" || ${NEED_IMPLICIT_LDADD:tl:Uno} != "no" __ldadd_xtras+= ${__lib} .endif .endfor .if !empty(__ldadd_xtras) # now back to the original order __ldadd_xtras:= ${__ldadd_xtras:[-1..1]} LDADD+= ${__ldadd_xtras} .endif # Convert DPADD into -I and -L options and add them to CPPFLAGS and LDADD # For the -I's convert the path to a relative one. For separate objdirs # the DPADD paths will be to the obj tree so we need to subst anyway. # update this __dpadd_libs := ${DPADD:M*/lib*} # Order -L's to search ours first. # Avoids picking up old versions already installed. __dpadd_libdirs := ${__dpadd_libs:R:H:S/^/-L/g:O:u:N-L} LDADD += ${__dpadd_libdirs:M-L${OBJTOP}/*} LDADD += ${__dpadd_libdirs:N-L${OBJTOP}/*:N-L${HOST_LIBDIR:U/usr/lib}} .if defined(HOST_LIBDIR) && ${HOST_LIBDIR} != "/usr/lib" LDADD+= -L${HOST_LIBDIR} .endif .if !make(dpadd) .ifdef LIB # Each lib is its own src_lib, we want to include it in SRC_LIBS # so that the correct INCLUDES_* will be picked up automatically. SRC_LIBS+= ${_OBJDIR}/lib${LIB}.a .endif .endif # # This little bit of magic, assumes that SRC_libfoo will be # set if it cannot be correctly derrived from ${LIBFOO} # Note that SRC_libfoo and INCLUDES_libfoo should be named for the # actual library name not the variable name that might refer to it. # 99% of the time the two are the same, but the DPADD logic # only has the library name available, so stick to that. # SRC_LIBS?= # magic_libs includes those we want to link with # as well as those we might look at __dpadd_magic_libs += ${__dpadd_libs} ${SRC_LIBS} DPMAGIC_LIBS += ${__dpadd_magic_libs} \ ${__dpadd_magic_libs:@d@${DPMAGIC_LIBS_${d:T:R}}@} # we skip this for staged libs .for __lib in ${DPMAGIC_LIBS:O:u:N${STAGE_OBJTOP:Unot}*/lib/*} # # if SRC_libfoo is not set, then we assume that the srcdir corresponding # to where we found the library is correct. # SRC_${__lib:T:R} ?= ${__lib:H:S,${OBJTOP},${RELSRCTOP},} # # This is a no-brainer but just to be complete... # OBJ_${__lib:T:R} ?= ${__lib:H:S,${OBJTOP},${RELOBJTOP},} # # If INCLUDES_libfoo is not set, then we'll use ${SRC_libfoo}/h if it exists, # else just ${SRC_libfoo}. # .if !empty(SRC_${__lib:T:R}) INCLUDES_${__lib:T:R} ?= -I${exists(${SRC_${__lib:T:R}}/h):?${SRC_${__lib:T:R}}/h:${SRC_${__lib:T:R}}} .endif .endfor # even for staged libs we sometimes # need to allow direct -I to avoid cicular dependencies .for __lib in ${DPMAGIC_LIBS:O:u:T:R} .if !empty(SRC_${__lib}) && empty(INCLUDES_${__lib}) # must be a staged lib .if exists(${SRC_${__lib}}/h) INCLUDES_${__lib} = -I${SRC_${__lib}}/h .else INCLUDES_${__lib} = -I${SRC_${__lib}} .endif .endif .endfor # when linking a shared lib, avoid non pic libs SHLDADD+= ${LDADD:N-[lL]*} .for __lib in ${__dpadd_libs:u} .if defined(SHLIB_NAME) && ${LDADD:M-l${__lib:T:R:S,lib,,}} != "" .if ${__lib:T:N*_pic.a:N*.so} == "" || exists(${__lib:R}.so) SHLDADD+= -l${__lib:T:R:S,lib,,} .elif exists(${__lib:R}_pic.a) SHLDADD+= -l${__lib:T:R:S,lib,,}_pic .else .warning ${RELDIR}.${TARGET_SPEC} needs ${__lib:T:R}_pic.a SHLDADD+= -l${__lib:T:R:S,lib,,} .endif SHLDADD+= -L${__lib:H} .endif .endfor # Now for the bits we actually need __dpadd_incs= .for __lib in ${__dpadd_libs:u} .if (make(${PROG}_p) || defined(NEED_GPROF)) && exists(${__lib:R}_p.a) __ldadd=-l${__lib:T:R:S,lib,,} LDADD := ${LDADD:S,^${__ldadd}$,${__ldadd}_p,g} .endif .endfor # # We take care of duplicate suppression later. # don't apply :T:R too early __dpadd_incs += ${__dpadd_magic_libs:u:@x@${INCLUDES_${x:T:R}}@} __dpadd_incs += ${__dpadd_magic_libs:O:u:@s@${SRC_LIBS_${s:T:R}:U}@:@x@${INCLUDES_${x:T:R}}@} __dpadd_last_incs += ${__dpadd_magic_libs:u:@x@${INCLUDES_LAST_${x:T:R}}@} __dpadd_last_incs += ${__dpadd_magic_libs:O:u:@s@${SRC_LIBS_${s:T:R}:U}@:@x@${INCLUDES_LAST_${x:T:R}}@} .if defined(HOSTPROG) || ${MACHINE:Nhost*} == "" # we want any -I/usr/* last __dpadd_last_incs := \ ${__dpadd_last_incs:N-I/usr/*} \ ${__dpadd_incs:M-I/usr/*} \ ${__dpadd_last_incs:M-I/usr/*} __dpadd_incs := ${__dpadd_incs:N-I/usr/*} .endif # # eliminate any duplicates - but don't mess with the order # force evaluation now - to avoid giving make a headache # .for t in CFLAGS CXXFLAGS # avoid duplicates __$t_incs:=${$t:M-I*:O:u} .for i in ${__dpadd_incs} .if "${__$t_incs:M$i}" == "" $t+= $i __$t_incs+= $i .endif .endfor .endfor .for t in CFLAGS_LAST CXXFLAGS_LAST # avoid duplicates __$t_incs:=${$t:M-I*:u} .for i in ${__dpadd_last_incs} .if "${__$t_incs:M$i}" == "" $t+= $i __$t_incs+= $i .endif .endfor .endfor # This target is used to gather a list of # dir: ${DPADD} # entries .if make(*dpadd*) .if !target(dpadd) dpadd: .NOTMAIN .if defined(DPADD) && ${DPADD} != "" @echo "${RELDIR}: ${DPADD:S,${OBJTOP}/,,}" .endif .endif .endif .ifdef SRC_PATHADD # We don't want to assume that we need to .PATH every element of # SRC_LIBS, but the Makefile cannot do # .PATH: ${SRC_libfoo} # since the value of SRC_libfoo must be available at the time .PATH: # is read - and we only just worked it out. # Further, they can't wait until after include of {lib,prog}.mk as # the .PATH is needed before then. # So we let the Makefile do # SRC_PATHADD+= ${SRC_libfoo} # and we defer the .PATH: until now so that SRC_libfoo will be available. .PATH: ${SRC_PATHADD} .endif # after all that, if doing -n we don't care .if ${.MAKEFLAGS:Ux:M-n} != "" DPADD = .elif ${.MAKE.MODE:Mmeta*} != "" && exists(${.MAKE.DEPENDFILE}) DPADD_CLEAR_DPADD ?= yes .if ${DPADD_CLEAR_DPADD} == "yes" # save this __dpadd_libs := ${__dpadd_libs} # we have made what use of it we can of DPADD DPADD = .endif .endif .endif diff --git a/contrib/bmake/mk/final.mk b/contrib/bmake/mk/final.mk index e7285ee9a5c1..3670dfc67a55 100644 --- a/contrib/bmake/mk/final.mk +++ b/contrib/bmake/mk/final.mk @@ -1,22 +1,22 @@ -# $Id: final.mk,v 1.9 2018/01/24 22:57:11 sjg Exp $ +# $Id: final.mk,v 1.10 2021/12/08 05:56:50 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN # provide a hook for folk who want to do scary stuff .-include <${.CURDIR:H}/Makefile-final.inc> .-include .if ${MK_STAGING} == "yes" .include .elif !empty(STAGE) .-include .endif .if empty(_SKIP_BUILD) install: realinstall .endif realinstall: .endif diff --git a/contrib/bmake/mk/init.mk b/contrib/bmake/mk/init.mk index 8f6f8f2fbaf4..356c8501367e 100644 --- a/contrib/bmake/mk/init.mk +++ b/contrib/bmake/mk/init.mk @@ -1,96 +1,96 @@ -# $Id: init.mk,v 1.25 2020/11/27 17:59:46 sjg Exp $ +# $Id: init.mk,v 1.26 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2002, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .if ${MAKE_VERSION:U0} > 20100408 _this_mk_dir := ${.PARSEDIR:tA} .else _this_mk_dir := ${.PARSEDIR} .endif .-include .-include <${.CURDIR:H}/Makefile.inc> .include .include .MAIN: all # should have been set by sys.mk CXX_SUFFIXES?= .cc .cpp .cxx .C .if !empty(WARNINGS_SET) || !empty(WARNINGS_SET_${MACHINE_ARCH}) .include .endif # these are applied in order, least specific to most VAR_QUALIFIER_LIST += \ ${TARGET_SPEC_VARS:UMACHINE:@v@${$v}@} \ ${COMPILER_TYPE} \ ${.TARGET:T:R} \ ${.TARGET:T} \ ${.IMPSRC:T} \ ${VAR_QUALIFIER_XTRA_LIST} QUALIFIED_VAR_LIST += \ CFLAGS \ COPTS \ CPPFLAGS \ CPUFLAGS \ LDFLAGS \ # a final :U avoids errors if someone uses := .for V in ${QUALIFIED_VAR_LIST:O:u:@q@$q $q_LAST@} .for Q in ${VAR_QUALIFIER_LIST:u} $V += ${$V.$Q:U} ${$V.$Q.${COMPILER_TYPE}:U} .endfor .endfor CC_PG?= -pg CXX_PG?= ${CC_PG} CC_PIC?= -DPIC CXX_PIC?= ${CC_PIC} PROFFLAGS?= -DGPROF -DPROF .if ${.MAKE.LEVEL:U1} == 0 && ${MK_DIRDEPS_BUILD:Uno} == "yes" # targets that are ok at level 0 DIRDEPS_BUILD_LEVEL0_TARGETS += clean* destroy* M_ListToSkip?= O:u:S,^,N,:ts: .if ${.TARGETS:Uall:${DIRDEPS_BUILD_LEVEL0_TARGETS:${M_ListToSkip}}} != "" # this tells lib.mk and prog.mk to not actually build anything _SKIP_BUILD = not building at level 0 .endif .endif .if !defined(.PARSEDIR) # no-op is the best we can do if not bmake. .WAIT: .endif # define this once for consistency .if !defined(_SKIP_BUILD) # beforebuild is a hook for things that must be done early all: beforebuild .WAIT realbuild .else all: .PHONY .if !empty(_SKIP_BUILD) && ${.MAKEFLAGS:M-V} == "" .warning ${_SKIP_BUILD} .endif .endif beforebuild: realbuild: .endif diff --git a/contrib/bmake/mk/install-mk b/contrib/bmake/mk/install-mk index 96c35b1052ec..21d00ae919a5 100755 --- a/contrib/bmake/mk/install-mk +++ b/contrib/bmake/mk/install-mk @@ -1,185 +1,185 @@ : # NAME: # install-mk - install mk files # # SYNOPSIS: # install-mk [options] [var=val] [dest] # # DESCRIPTION: # This tool installs mk files in a semi-intelligent manner into # "dest". # # Options: # # -n just say what we want to do, but don't touch anything. # # -f use -f when copying sys,mk. # # -v be verbose # # -q be quiet # # -m "mode" # Use "mode" for installed files (444). # # -o "owner" # Use "owner" for installed files. # # -g "group" # Use "group" for installed files. # # var=val # Set "var" to "val". See below. # # All our *.mk files are copied to "dest" with appropriate # ownership and permissions. # # By default if a sys.mk can be found in a standard location # (that bmake will find) then no sys.mk will be put in "dest". # # SKIP_SYS_MK: # If set, we will avoid installing our 'sys.mk' # This is probably a bad idea. # # SKIP_BSD_MK: # If set, we will skip making bsd.*.mk links to *.mk # # sys.mk: # # By default (and provided we are not installing to the system # mk dir - '/usr/share/mk') we install our own 'sys.mk' which # includes a sys specific file, or a generic one. # # # AUTHOR: # Simon J. Gerraty # RCSid: -# $Id: install-mk,v 1.196 2021/06/19 15:30:41 sjg Exp $ +# $Id: install-mk,v 1.206 2021/12/11 18:57:41 sjg Exp $ # # @(#) Copyright (c) 1994 Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # -MK_VERSION=20210616 +MK_VERSION=20211212 OWNER= GROUP= MODE=444 BINMODE=555 ECHO=: SKIP= cp_f=-f while : do case "$1" in *=*) eval "$1"; shift;; +f) cp_f=; shift;; -f) cp_f=-f; shift;; -m) MODE=$2; shift 2;; -o) OWNER=$2; shift 2;; -g) GROUP=$2; shift 2;; -v) ECHO=echo; shift;; -q) ECHO=:; shift;; -n) ECHO=echo SKIP=:; shift;; --) shift; break;; *) break;; esac done case $# in 0) echo "$0 [options] []" echo "eg." echo "$0 -o bin -g bin -m 444 /usr/local/share/mk" exit 1 ;; esac dest=$1 os=${2:-`uname`} osrel=${3:-`uname -r`} Do() { $ECHO "$@" $SKIP "$@" } Error() { echo "ERROR: $@" >&2 exit 1 } Warning() { echo "WARNING: $@" >&2 } [ "$FORCE_SYS_MK" ] && Warning "ignoring: FORCE_{BSD,SYS}_MK (no longer supported)" SYS_MK_DIR=${SYS_MK_DIR:-/usr/share/mk} SYS_MK=${SYS_MK:-$SYS_MK_DIR/sys.mk} realpath() { [ -d $1 ] && cd $1 && 'pwd' && return echo $1 } if [ -s $SYS_MK -a -d $dest ]; then # if this is a BSD system we don't want to touch $SYS_MK dest=`realpath $dest` sys_mk_dir=`realpath $SYS_MK_DIR` if [ $dest = $sys_mk_dir ]; then case "$os" in *BSD*) SKIP_SYS_MK=: SKIP_BSD_MK=: ;; *) # could be fake? if [ ! -d $dest/sys -a ! -s $dest/Generic.sys.mk ]; then SKIP_SYS_MK=: # play safe SKIP_BSD_MK=: fi ;; esac fi fi [ -d $dest/sys ] || Do mkdir -p $dest/sys [ -d $dest/sys ] || Do mkdir $dest/sys || exit 1 [ -z "$SKIP" ] && dest=`realpath $dest` cd `dirname $0` mksrc=`'pwd'` if [ $mksrc = $dest ]; then SKIP_MKFILES=: else # we do not install the examples mk_files=`grep '^[a-z].*\.mk' FILES | egrep -v '(examples/|^sys\.mk|sys/)'` mk_scripts=`egrep '^[a-z].*\.(sh|py)' FILES | egrep -v '/'` sys_mk_files=`grep 'sys/.*\.mk' FILES` SKIP_MKFILES= [ -z "$SKIP_SYS_MK" ] && mk_files="sys.mk $mk_files" fi $SKIP_MKFILES Do cp $cp_f $mk_files $dest $SKIP_MKFILES Do cp $cp_f $sys_mk_files $dest/sys $SKIP_MKFILES Do cp $cp_f $mk_scripts $dest $SKIP cd $dest $SKIP_MKFILES Do chmod $MODE $mk_files $sys_mk_files $SKIP_MKFILES Do chmod $BINMODE $mk_scripts [ "$GROUP" ] && $SKIP_MKFILES Do chgrp $GROUP $mk_files $sys_mk_files [ "$OWNER" ] && $SKIP_MKFILES Do chown $OWNER $mk_files $sys_mk_files # if this is a BSD system the bsd.*.mk should exist and be used. if [ -z "$SKIP_BSD_MK" ]; then for f in dep doc files inc init lib links man nls obj own prog subdir do b=bsd.$f.mk [ -s $b ] || Do ln -s $f.mk $b done fi exit 0 diff --git a/contrib/bmake/mk/java.mk b/contrib/bmake/mk/java.mk index e2149e7089a7..3a4e7911e536 100644 --- a/contrib/bmake/mk/java.mk +++ b/contrib/bmake/mk/java.mk @@ -1,97 +1,97 @@ # # RCSid: -# $Id: java.mk,v 1.15 2020/08/19 17:51:53 sjg Exp $ +# $Id: java.mk,v 1.16 2021/12/08 05:56:50 sjg Exp $ # @(#) Copyright (c) 1998-2001, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .include CLASSPATH?=. .if defined(PROG) SRCS?= ${PROG:.class=.java} .endif .if !defined(SRCS) || empty(SRCS) SRCS!=cd ${.CURDIR} && echo *.java .endif .SUFFIXES: .class .java CLEANFILES+= *.class JAVAC?= javac JAVADOC?= javadoc .if !target(docs) docs: ${JAVADOC} ${JAVADOC_FLAGS} ${SRCS} .endif .if defined(JAVADESTDIR) && !empty(JAVADESTDIR) JAVASRCDIR?=${JAVADESTDIR:H}/src __classdest:=${JAVADESTDIR}${.CURDIR:S,${JAVASRCDIR},,}/ CLASSPATH:=${CLASSPATH}:${JAVADESTDIR} JAVAC_FLAGS+= -d ${JAVADESTDIR} .else __classdest= .endif JAVAC_FLAGS+= ${JAVAC_DBG} .if defined(MAKE_VERSION) && !defined(NO_CLASSES_COOKIE) # java works best by compiling a bunch of classes at once. # this lot does that but needs a recent netbsd make or # or its portable cousin bmake. .for __s in ${SRCS} __c:= ${__classdest}${__s:.java=.class} .if !target(${__c}) # We need to do something to force __c's parent to be made. ${__c}: ${__s} @rm -f ${.TARGET} .endif SRCS_${__c}=${__s} __classes:= ${__classes} ${__c} .endfor __classes_cookie=${__classdest}.classes.done CLEANFILES+= ${__classes} ${__classes_cookie} ${__classes_cookie}: ${__classes} CLASSPATH=${CLASSPATH} ${JAVAC} ${JAVAC_FLAGS} ${.OODATE:@c@${SRCS_$c}@} @touch ${.TARGET} all: ${__classes_cookie} .else # this will work with other BSD make's .for __s in ${SRCS} __c:= ${__classdest}${__s:.java=.class} ${__c}: ${__s} CLASSPATH=${CLASSPATH} ${JAVAC} ${JAVAC_FLAGS} ${.OODATE} .endfor all: ${SRCS:%.java=${__classdest}%.class} .endif .if !target(cleanjava) cleanjava: rm -f [Ee]rrs mklog core *.core ${PROG} ${CLEANFILES} clean: cleanjava cleandir: cleanjava .endif .endif diff --git a/contrib/bmake/mk/ldorder.mk b/contrib/bmake/mk/ldorder.mk index 3d44df5874fe..5ae54385993e 100644 --- a/contrib/bmake/mk/ldorder.mk +++ b/contrib/bmake/mk/ldorder.mk @@ -1,156 +1,156 @@ -# $Id: ldorder.mk,v 1.25 2018/04/24 23:50:26 sjg Exp $ +# $Id: ldorder.mk,v 1.26 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2015, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # Try to compute optimal link order. # When using only shared libs link order does not much matter, # but archive libs are a different matter. # We can construct a graph of .ldorder-lib${LIB*} dependencies # and associate each with _LDORDER_USE to output the relevant # ld flags. # Due to the nature of make, the result will be in the reverse order # that we want to feed to ld. # So we need to reverse it before use. .if !target(_LDORDER_USE) # does caller want to use ldorder? # yes for prog, normally no for lib .if ${.ALLTARGETS:Mldorder} != "" _ldorder_use: .endif # define this if we need a barrier between local and external libs # see below LDORDER_EXTERN_BARRIER ?= .ldorder-extern-barrier .-include # convert /path/to/libfoo.a into _{LIBFOO} LDORDER_INC_FILTER += S,+,PLUS,g S,.so$$,,g LDORDER_LIBS_FILTER += O:u LDORDER_INC ?= ldorder.inc # for meta mode REFERENCE_FILE ?= : _LDORDER_USE: .ldorder-rm .USE .NOTMAIN @echo depends: ${.ALLSRC:M.ldorder-lib*} > /dev/null @echo ${LDADD_${.TARGET:T:S,.ldorder-,,}:U${.TARGET:T:S/.ldorder-lib/-l/}} >> .ldorder @${META_COOKIE_TOUCH} # we need to truncate our working file .ldorder-rm: .NOTMAIN @rm -f .ldorder ldorder-* @${.ALLSRC:O:u:@f@${REFERENCE_FILE} < $f;@} @${META_COOKIE_TOUCH} # make sure this exists .ldorder: .NOTMAIN # and finally we need to reverse the order of content ldorder: .ldorder .NOTMAIN @{ test ! -s .ldorder || cat -n .ldorder | sort -rn | \ sed '/ldorder-/d;s,^[[:space:]0-9]*,,'; } > ${.TARGET} # Initially we hook contents of DPLIBS and DPADD into our graph LDORDER_LIBS ?= ${DPLIBS} ${DPADD:M*/lib*} ${__dpadd_libs} # we need to remember this _LDORDER_LIBS := ${LDORDER_LIBS:${LDORDER_LIBS_FILTER:ts:}} .if empty(_LDORDER_LIBS) # don't use stale ldorder LDADD_LDORDER = .else # this is how you use it LDADD_LDORDER ?= `cat ldorder` .endif # for debug below _ldorder = ${RELDIR}.${TARGET_SPEC} # we make have some libs that exist outside of $SB # and want to insert a barrier .if target(${LDORDER_EXTERN_BARRIER}) # eg. in local.ldorder.mk # ${LDORDER_EXTERN_BARRIER}: # @test -z "${extern_ldorders}" || \ # echo -Wl,-Bdynamic >> .ldorder # # feel free to put more suitable version in local.ldorder.mk if needed # we do *not* count host libs in extern_ldorders extern_ldorders ?= ${__dpadd_libs:tA:N/lib*:N/usr/lib*:N${SB}/*:N${SB_OBJROOT:tA}*:T:${LDORDER_LIBS_FILTER:ts:}:R:C/\.so.*//:S,^,.ldorder-,:N.ldorder-} sb_ldorders ?= ${.ALLTARGETS:M.ldorder-*:N${LDORDER_EXTERN_BARRIER}:N.ldorder-rm:${extern_ldorders:${M_ListToSkip}}:N.ldorder-} # finally in Makefile after include of *.mk put # .ldorder ${sb_ldorders}: ${LDORDER_EXTERN_BARRIER} # ${LDORDER_EXTERN_BARRIER}: ${extern_ldorders} .endif .endif # !target(_LDORDER_USE) .if !empty(LDORDER_LIBS) && target(_ldorder_use) # canonicalize - these are just tokens anyway LDORDER_LIBS := ${LDORDER_LIBS:${LDORDER_LIBS_FILTER:ts:}:R:C/\.so.*//} _ldorders := ${LDORDER_LIBS:T:Mlib*:S,^,.ldorder-,} .for t in ${_ldorders} .if !target($t) $t: _LDORDER_USE .endif .endfor # and this makes it all happen .ldorder: ${_ldorders} # this is how we get the dependencies .if ${.INCLUDEDFROMFILE:M*.${LDORDER_INC}} != "" _ldorder := .ldorder-${.INCLUDEDFROMFILE:S/.${LDORDER_INC}//} ${_ldorder}: ${_ldorders} .ldorder-rm: ${.INCLUDEDFROMDIR}/${.INCLUDEDFROMFILE} .endif # set DEBUG_LDORDER to pattern[s] that match the dirs of interest .if ${DEBUG_LDORDER:Uno:@x@${RELDIR:M$x}@} != "" .info ${_ldorder}: ${_ldorders} .endif # now try to find more ... # each *.${LDORDER_INC} should set LDORDER_LIBS to what it needs # it can also add to CFLAGS etc. .for __inc in ${LDORDER_LIBS:S,$,.${LDORDER_INC},} .if !target(__${__inc}__) -__${__inc}__: +__${__inc}__: .NOTMAIN # make sure this is reset LDORDER_LIBS = _ldorders = .-include <${__inc}> .endif .endfor .endif # !empty(LDORDER_LIBS) .ifdef LIB # you can make this depend on files (must match *ldorder*) # to add extra content - like CFLAGS libLDORDER_INC = lib${LIB}.${LDORDER_INC} .if !commands(${libLDORDER_INC}) .if target(ldorder-header) ${libLDORDER_INC}: ldorder-header .endif ${libLDORDER_INC}: @(cat /dev/null ${.ALLSRC:M*ldorder*}; \ echo 'LDORDER_LIBS= ${_LDORDER_LIBS:T:R:${LDORDER_INC_FILTER:ts:}:tu:C,.*,_{&},:N_{}}'; \ echo; echo '.include ' ) | sed 's,_{,$${,g' > ${.TARGET} .endif .endif diff --git a/contrib/bmake/mk/lib.mk b/contrib/bmake/mk/lib.mk index c3979414ec49..259107458ae9 100644 --- a/contrib/bmake/mk/lib.mk +++ b/contrib/bmake/mk/lib.mk @@ -1,609 +1,609 @@ -# $Id: lib.mk,v 1.71 2020/08/19 17:51:53 sjg Exp $ +# $Id: lib.mk,v 1.73 2021/12/08 05:56:50 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .include .if ${OBJECT_FMT} == "ELF" NEED_SOLINKS?= yes .endif SHLIB_VERSION_FILE?= ${.CURDIR}/shlib_version .if !defined(SHLIB_MAJOR) && exists(${SHLIB_VERSION_FILE}) SHLIB_MAJOR != . ${SHLIB_VERSION_FILE} ; echo $$major SHLIB_MINOR != . ${SHLIB_VERSION_FILE} ; echo $$minor SHLIB_TEENY != . ${SHLIB_VERSION_FILE} ; echo $$teeny .endif .for x in major minor teeny print-shlib-$x: .if defined(SHLIB_${x:tu}) && ${MK_PIC} != "no" @echo ${SHLIB_${x:tu}} .else @false .endif .endfor SHLIB_FULLVERSION ?= ${${SHLIB_MAJOR} ${SHLIB_MINOR} ${SHLIB_TEENY}:L:ts.} SHLIB_FULLVERSION := ${SHLIB_FULLVERSION} # add additional suffixes not exported. # .po is used for profiling object files. # ${PICO} is used for PIC object files. PICO?= .pico .SUFFIXES: .out .a .ln ${PICO} .po .o .s .S .c .cc .C .m .F .f .r .y .l .cl .p .h .SUFFIXES: .sh .m4 .m CFLAGS+= ${COPTS} META_NOECHO?= echo # Originally derrived from NetBSD-1.6 # Set PICFLAGS to cc flags for producing position-independent code, # if not already set. Includes -DPIC, if required. # Data-driven table using make variables to control how shared libraries # are built for different platforms and object formats. # OBJECT_FMT: currently either "ELF" or "a.out", from # SHLIB_SOVERSION: version number to be compiled into a shared library # via -soname. Usually ${SHLIB_MAJOR} on ELF. # NetBSD/pmax used to use ${SHLIB_MAJOR}[.${SHLIB_MINOR} # [.${SHLIB_TEENY}]] # SHLIB_SHFLAGS: Flags to tell ${LD} to emit shared library. # with ELF, also set shared-lib version for ld.so. # SHLIB_LDSTARTFILE: support .o file, call C++ file-level constructors # SHLIB_LDENDFILE: support .o file, call C++ file-level destructors # FPICFLAGS: flags for ${FC} to compile .[fF] files to ${PICO} objects. # CPPICFLAGS: flags for ${CPP} to preprocess .[sS] files for ${AS} # CPICFLAGS: flags for ${CC} to compile .[cC] files to ${PICO} objects. # CAPICFLAGS flags for {$CC} to compiling .[Ss] files # (usually just ${CPPPICFLAGS} ${CPICFLAGS}) # APICFLAGS: flags for ${AS} to assemble .[sS] to ${PICO} objects. .if ${TARGET_OSNAME} == "NetBSD" .if ${MACHINE_ARCH} == "alpha" # Alpha-specific shared library flags FPICFLAGS ?= -fPIC CPICFLAGS ?= -fPIC -DPIC CPPPICFLAGS?= -DPIC CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS} APICFLAGS ?= .elif ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" # mips-specific shared library flags # On mips, all libs are compiled with ABIcalls, not just sharedlibs. MKPICLIB= no # so turn shlib PIC flags on for ${AS}. AINC+=-DABICALLS AFLAGS+= -fPIC AS+= -KPIC .elif ${MACHINE_ARCH} == "vax" && ${OBJECT_FMT} == "ELF" # On the VAX, all object are PIC by default, not just sharedlibs. MKPICLIB= no .elif (${MACHINE_ARCH} == "sparc" || ${MACHINE_ARCH} == "sparc64") && \ ${OBJECT_FMT} == "ELF" # If you use -fPIC you need to define BIGPIC to turn on 32-bit # relocations in asm code FPICFLAGS ?= -fPIC CPICFLAGS ?= -fPIC -DPIC CPPPICFLAGS?= -DPIC -DBIGPIC CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS} APICFLAGS ?= -KPIC .else # Platform-independent flags for NetBSD a.out shared libraries SHLIB_SOVERSION=${SHLIB_FULLVERSION} SHLIB_SHFLAGS= FPICFLAGS ?= -fPIC CPICFLAGS?= -fPIC -DPIC CPPPICFLAGS?= -DPIC CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS} APICFLAGS?= -k .endif # Platform-independent linker flags for ELF shared libraries .if ${OBJECT_FMT} == "ELF" SHLIB_SOVERSION= ${SHLIB_MAJOR} SHLIB_SHFLAGS= -soname lib${LIB}.so.${SHLIB_SOVERSION} SHLIB_LDSTARTFILE?= /usr/lib/crtbeginS.o SHLIB_LDENDFILE?= /usr/lib/crtendS.o .endif # for compatibility with the following CC_PIC?= ${CPICFLAGS} LD_shared=${SHLIB_SHFLAGS} .endif # NetBSD .if ${TARGET_OSNAME} == "FreeBSD" .if ${OBJECT_FMT} == "ELF" SHLIB_SOVERSION= ${SHLIB_MAJOR} SHLIB_SHFLAGS= -soname lib${LIB}.so.${SHLIB_SOVERSION} .else SHLIB_SHFLAGS= -assert pure-text .endif SHLIB_LDSTARTFILE= SHLIB_LDENDFILE= CC_PIC?= -fpic LD_shared=${SHLIB_SHFLAGS} .endif # FreeBSD MKPICLIB?= yes # sys.mk can override these LD_X?=-X LD_x?=-x LD_r?=-r # Non BSD machines will be using bmake. .if ${TARGET_OSNAME} == "SunOS" LD_shared=-assert pure-text .if ${OBJECT_FMT} == "ELF" || ${MACHINE} == "solaris" # Solaris LD_shared=-h lib${LIB}.so.${SHLIB_MAJOR} -G .endif .elif ${TARGET_OSNAME} == "HP-UX" LD_shared=-b LD_so=sl DLLIB= # HPsUX lorder does not grok anything but .o LD_sobjs=`${LORDER} ${OBJS} | ${TSORT} | sed 's,\.o,${PICO},'` LD_pobjs=`${LORDER} ${OBJS} | ${TSORT} | sed 's,\.o,.po,'` .elif ${TARGET_OSNAME} == "OSF1" LD_shared= -msym -shared -expect_unresolved '*' LD_solib= -all lib${LIB}_pic.a DLLIB= # lorder does not grok anything but .o LD_sobjs=`${LORDER} ${OBJS} | ${TSORT} | sed 's,\.o,${PICO},'` LD_pobjs=`${LORDER} ${OBJS} | ${TSORT} | sed 's,\.o,.po,'` AR_cq= -cqs .elif ${TARGET_OSNAME} == "FreeBSD" LD_solib= lib${LIB}_pic.a .elif ${TARGET_OSNAME} == "Linux" SHLIB_LD = ${CC} # this is ambiguous of course -LD_shared=-shared -Wl,"-soname lib${LIB}.so.${SHLIB_MAJOR}" +LD_shared=-shared -Wl,-soname,lib${LIB}.so.${SHLIB_MAJOR} LD_solib= -Wl,--whole-archive lib${LIB}_pic.a -Wl,--no-whole-archive .if ${COMPILER_TYPE} == "gcc" # Linux uses GNU ld, which is a multi-pass linker # so we don't need to use lorder or tsort LD_objs = ${OBJS} LD_pobjs = ${POBJS} LD_sobjs = ${SOBJS} .endif .elif ${TARGET_OSNAME} == "Darwin" SHLIB_LD = ${CC} SHLIB_INSTALL_VERSION ?= ${SHLIB_MAJOR} SHLIB_COMPATABILITY_VERSION ?= ${SHLIB_MAJOR}.${SHLIB_MINOR:U0} SHLIB_COMPATABILITY ?= \ -compatibility_version ${SHLIB_COMPATABILITY_VERSION} \ -current_version ${SHLIB_FULLVERSION} LD_shared = -dynamiclib \ -flat_namespace -undefined suppress \ -install_name ${LIBDIR}/lib${LIB}.${SHLIB_INSTALL_VERSION}.${LD_solink} \ ${SHLIB_COMPATABILITY} SHLIB_LINKS = .for v in ${SHLIB_COMPATABILITY_VERSION} ${SHLIB_INSTALL_VERSION} .if "$v" != "${SHLIB_FULLVERSION}" SHLIB_LINKS += lib${LIB}.$v.${LD_solink} .endif .endfor .if ${MK_LINKLIB} != "no" SHLIB_LINKS += lib${LIB}.${LD_solink} .endif LD_so = ${SHLIB_FULLVERSION}.dylib LD_sobjs = ${SOBJS:O:u} LD_solib = ${LD_sobjs} SOLIB = ${LD_sobjs} LD_solink = dylib .if ${MACHINE_ARCH} == "i386" PICFLAG ?= -fPIC .else PICFLAG ?= -fPIC -fno-common .endif RANLIB = : .endif SHLIB_LD ?= ${LD} .if !empty(SHLIB_MAJOR) .if ${NEED_SOLINKS} && empty(SHLIB_LINKS) .if ${MK_LINKLIB} != "no" SHLIB_LINKS = lib${LIB}.${LD_solink} .endif .if "${SHLIB_FULLVERSION}" != "${SHLIB_MAJOR}" SHLIB_LINKS += lib${LIB}.${LD_solink}.${SHLIB_MAJOR} .endif .endif .endif LIBTOOL?=libtool LD_shared ?= -Bshareable -Bforcearchive LD_so ?= so.${SHLIB_FULLVERSION} LD_solink ?= so .if empty(LORDER) LD_objs ?= ${OBJS} LD_pobjs ?= ${POBJS} LD_sobjs ?= ${SOBJS} .else LD_objs ?= `${LORDER} ${OBJS} | ${TSORT}` LD_sobjs ?= `${LORDER} ${SOBJS} | ${TSORT}` LD_pobjs ?= `${LORDER} ${POBJS} | ${TSORT}` .endif LD_solib ?= ${LD_sobjs} AR_cq ?= cq .if exists(/netbsd) && exists(${DESTDIR}/usr/lib/libdl.so) DLLIB ?= -ldl .endif # some libs have lots of objects, and scanning all .o, .po and ${PICO} meta files # is a waste of time, this tells meta.autodep.mk to just pick one # (typically ${PICO}) # yes, 42 is a random number. .if ${MK_DIRDEPS_BUILD} == "yes" && ${SRCS:Uno:[\#]} > 42 OPTIMIZE_OBJECT_META_FILES ?= yes .endif .if ${MK_LIBTOOL} == "yes" # because libtool is so fascist about naming the object files, # we cannot (yet) build profiled libs MK_PROFILE=no _LIBS=lib${LIB}.a .if exists(${.CURDIR}/shlib_version) SHLIB_AGE != . ${.CURDIR}/shlib_version ; echo $$age .endif .else # for the normal .a we do not want to strip symbols .c.o: ${COMPILE.c} ${.IMPSRC} # for the normal .a we do not want to strip symbols ${CXX_SUFFIXES:%=%.o}: ${COMPILE.cc} ${.IMPSRC} .S.o .s.o: ${COMPILE.S} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} .if (${LD_X} == "") .c.po: ${COMPILE.c} ${CC_PG} ${PROFFLAGS} ${.IMPSRC} -o ${.TARGET} ${CXX_SUFFIXES:%=%.po}: ${COMPILE.cc} -pg ${.IMPSRC} -o ${.TARGET} .S${PICO} .s${PICO}: ${COMPILE.S} ${PICFLAG} ${CC_PIC} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET} .else .c.po: ${COMPILE.c} ${CC_PG} ${PROFFLAGS} ${.IMPSRC} -o ${.TARGET}.o @${LD} ${LD_X} ${LD_r} ${.TARGET}.o -o ${.TARGET} @rm -f ${.TARGET}.o ${CXX_SUFFIXES:%=%.po}: ${COMPILE.cc} ${CXX_PG} ${.IMPSRC} -o ${.TARGET}.o ${LD} ${LD_X} ${LD_r} ${.TARGET}.o -o ${.TARGET} @rm -f ${.TARGET}.o .S${PICO} .s${PICO}: ${COMPILE.S} ${PICFLAG} ${CC_PIC} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o ${LD} ${LD_x} ${LD_r} ${.TARGET}.o -o ${.TARGET} @rm -f ${.TARGET}.o .endif .if (${LD_x} == "") .c${PICO}: ${COMPILE.c} ${PICFLAG} ${CC_PIC} ${.IMPSRC} -o ${.TARGET} ${CXX_SUFFIXES:%=%${PICO}}: ${COMPILE.cc} ${PICFLAG} ${CC_PIC} ${.IMPSRC} -o ${.TARGET} .S.po .s.po: ${COMPILE.S} ${PROFFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET} .else .c${PICO}: ${COMPILE.c} ${PICFLAG} ${CC_PIC} ${.IMPSRC} -o ${.TARGET}.o ${LD} ${LD_x} ${LD_r} ${.TARGET}.o -o ${.TARGET} @rm -f ${.TARGET}.o ${CXX_SUFFIXES:%=%${PICO}}: ${COMPILE.cc} ${PICFLAG} ${CC_PIC} ${.IMPSRC} -o ${.TARGET}.o ${LD} ${LD_x} ${LD_r} ${.TARGET}.o -o ${.TARGET} @rm -f ${.TARGET}.o .S.po .s.po: ${COMPILE.S} ${PROFFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o ${LD} ${LD_X} ${LD_r} ${.TARGET}.o -o ${.TARGET} @rm -f ${.TARGET}.o .endif .endif .c.ln: ${LINT} ${LINTFLAGS} ${CFLAGS:M-[IDU]*} -i ${.IMPSRC} .if ${MK_LIBTOOL} != "yes" .if !defined(PICFLAG) PICFLAG=-fpic .endif _LIBS= .if ${MK_ARCHIVE} != "no" _LIBS += lib${LIB}.a .endif .if ${MK_PROFILE} != "no" _LIBS+=lib${LIB}_p.a POBJS+=${OBJS:.o=.po} .endif .if ${MK_PIC} != "no" .if ${MK_PICLIB} == "no" SOLIB ?= lib${LIB}.a .else SOLIB=lib${LIB}_pic.a _LIBS+=${SOLIB} .endif .if !empty(SHLIB_FULLVERSION) _LIBS+=lib${LIB}.${LD_so} .endif .endif .if ${MK_LINT} != "no" _LIBS+=llib-l${LIB}.ln .endif # here is where you can define what LIB* are .-include .if ${MK_DPADD_MK} == "yes" # lots of cool magic, but might not suit everyone. .include .endif .if empty(LIB) _LIBS= .elif ${MK_LDORDER_MK} != "no" # Record any libs that we need to be linked with _LIBS+= ${libLDORDER_INC} .include .endif .if !defined(_SKIP_BUILD) realbuild: ${_LIBS} .endif all: _SUBDIRUSE .for s in ${SRCS:N*.h:M*/*} ${.o ${PICO} .po .lo:L:@o@${s:T:R}$o@}: $s .endfor OBJS+= ${SRCS:T:N*.h:R:S/$/.o/g} .NOPATH: ${OBJS} .if ${MK_LIBTOOL} == "yes" .if ${MK_PIC} == "no" LT_STATIC=-static .else LT_STATIC= .endif SHLIB_AGE?=0 # .lo's are created as a side effect .s.o .S.o .c.o: ${LIBTOOL} --mode=compile ${CC} ${LT_STATIC} ${CFLAGS} ${CPPFLAGS} ${IMPFLAGS} -c ${.IMPSRC} # can't really do profiled libs with libtool - its too fascist about # naming the output... lib${LIB}.a: ${OBJS} @rm -f ${.TARGET} ${LIBTOOL} --mode=link ${CC} ${LT_STATIC} -o ${.TARGET:.a=.la} ${OBJS:.o=.lo} -rpath ${SHLIBDIR}:/usr/lib -version-info ${SHLIB_MAJOR}:${SHLIB_MINOR}:${SHLIB_AGE} @ln .libs/${.TARGET} . lib${LIB}.${LD_so}: lib${LIB}.a @[ -s ${.TARGET}.${SHLIB_AGE} ] || { ln -s .libs/lib${LIB}.${LD_so}* . 2>/dev/null; : } @[ -s ${.TARGET} ] || ln -s ${.TARGET}.${SHLIB_AGE} ${.TARGET} .else # MK_LIBTOOL=yes lib${LIB}.a: ${OBJS} @${META_NOECHO} building standard ${LIB} library @rm -f ${.TARGET} @${AR} ${AR_cq} ${.TARGET} ${LD_objs} ${RANLIB} ${.TARGET} POBJS+= ${OBJS:.o=.po} .NOPATH: ${POBJS} lib${LIB}_p.a: ${POBJS} @${META_NOECHO} building profiled ${LIB} library @rm -f ${.TARGET} @${AR} ${AR_cq} ${.TARGET} ${LD_pobjs} ${RANLIB} ${.TARGET} SOBJS+= ${OBJS:.o=${PICO}} .NOPATH: ${SOBJS} lib${LIB}_pic.a: ${SOBJS} @${META_NOECHO} building shared object ${LIB} library @rm -f ${.TARGET} @${AR} ${AR_cq} ${.TARGET} ${LD_sobjs} ${RANLIB} ${.TARGET} #SHLIB_LDADD?= ${LDADD} # bound to be non-portable... # this is known to work for NetBSD 1.6 and FreeBSD 4.2 lib${LIB}.${LD_so}: ${SOLIB} ${DPADD} @${META_NOECHO} building shared ${LIB} library \(version ${SHLIB_FULLVERSION}\) @rm -f ${.TARGET} .if ${TARGET_OSNAME} == "NetBSD" || ${TARGET_OSNAME} == "FreeBSD" .if ${OBJECT_FMT} == "ELF" ${SHLIB_LD} -x -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \ ${SHLIB_LDSTARTFILE} \ --whole-archive ${SOLIB} --no-whole-archive ${SHLIB_LDADD} \ ${SHLIB_LDENDFILE} .else ${SHLIB_LD} ${LD_x} ${LD_shared} \ -o ${.TARGET} ${SOLIB} ${SHLIB_LDADD} .endif .else ${SHLIB_LD} -o ${.TARGET} ${LD_shared} ${LD_solib} ${DLLIB} ${SHLIB_LDADD} .endif .endif .if !empty(SHLIB_LINKS) rm -f ${SHLIB_LINKS}; ${SHLIB_LINKS:O:u:@x@ln -s ${.TARGET} $x;@} .endif LOBJS+= ${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln} .NOPATH: ${LOBJS} LLIBS?= -lc llib-l${LIB}.ln: ${LOBJS} @${META_NOECHO} building llib-l${LIB}.ln @rm -f llib-l${LIB}.ln @${LINT} -C${LIB} ${LOBJS} ${LLIBS} .if !target(clean) cleanlib: .PHONY rm -f a.out [Ee]rrs mklog core *.core ${CLEANFILES} rm -f lib${LIB}.a ${OBJS} rm -f lib${LIB}_p.a ${POBJS} rm -f lib${LIB}_pic.a lib${LIB}.so.*.* ${SOBJS} rm -f llib-l${LIB}.ln ${LOBJS} .if !empty(SHLIB_LINKS) rm -f ${SHLIB_LINKS} .endif clean: _SUBDIRUSE cleanlib cleandir: _SUBDIRUSE cleanlib .else cleandir: _SUBDIRUSE clean .endif .if defined(SRCS) && (!defined(MKDEP) || ${MKDEP} != autodep) afterdepend: .depend @(TMP=/tmp/_depend$$$$; \ sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.po \1${PICO} \1.ln:/' \ < .depend > $$TMP; \ mv $$TMP .depend) .endif .if !target(install) .if !target(beforeinstall) beforeinstall: .endif .if !empty(LIBOWN) LIB_INSTALL_OWN ?= -o ${LIBOWN} -g ${LIBGRP} .endif .include .if !target(libinstall) && !empty(LIB) realinstall: libinstall libinstall: [ -d ${DESTDIR}/${LIBDIR} ] || \ ${INSTALL} -d ${LIB_INSTALL_OWN} -m 775 ${DESTDIR}${LIBDIR} .if ${MK_ARCHIVE} != "no" ${INSTALL} ${COPY} ${LIB_INSTALL_OWN} -m 644 lib${LIB}.a \ ${DESTDIR}${LIBDIR} ${RANLIB} ${DESTDIR}${LIBDIR}/lib${LIB}.a chmod ${LIBMODE} ${DESTDIR}${LIBDIR}/lib${LIB}.a .endif .if ${MK_PROFILE} != "no" ${INSTALL} ${COPY} ${LIB_INSTALL_OWN} -m 644 \ lib${LIB}_p.a ${DESTDIR}${LIBDIR} ${RANLIB} ${DESTDIR}${LIBDIR}/lib${LIB}_p.a chmod ${LIBMODE} ${DESTDIR}${LIBDIR}/lib${LIB}_p.a .endif .if ${MK_LDORDER_MK} != "no" ${INSTALL} ${COPY} ${LIB_INSTALL_OWN} -m 644 \ lib${LIB}.ldorder.inc ${DESTDIR}${LIBDIR} .endif .if ${MK_PIC} != "no" .if ${MK_PICLIB} != "no" ${INSTALL} ${COPY} ${LIB_INSTALL_OWN} -m 644 \ lib${LIB}_pic.a ${DESTDIR}${LIBDIR} ${RANLIB} ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a chmod ${LIBMODE} ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a .endif .if !empty(SHLIB_MAJOR) ${INSTALL} ${COPY} ${LIB_INSTALL_OWN} -m ${LIBMODE} \ lib${LIB}.${LD_so} ${DESTDIR}${LIBDIR} .if !empty(SHLIB_LINKS) (cd ${DESTDIR}${LIBDIR} && { rm -f ${SHLIB_LINKS}; ${SHLIB_LINKS:O:u:@x@ln -s lib${LIB}.${LD_so} $x;@} }) .endif .endif .endif .if ${MK_LINT} != "no" && ${MK_LINKLIB} != "no" && !empty(LOBJS) ${INSTALL} ${COPY} ${LIB_INSTALL_OWN} -m ${LIBMODE} \ llib-l${LIB}.ln ${DESTDIR}${LINTLIBDIR} .endif .if defined(LINKS) && !empty(LINKS) @set ${LINKS}; ${_LINKS_SCRIPT} .endif .endif .if ${MK_MAN} != "no" install: maninstall _SUBDIRUSE maninstall: afterinstall .endif afterinstall: realinstall libinstall: beforeinstall realinstall: beforeinstall .endif .if defined(FILES) || defined(FILESGROUPS) .include .endif .if ${MK_MAN} != "no" .include .endif .if ${MK_NLS} != "no" .include .endif .include .include .include .include .endif # during building we usually need/want to install libs somewhere central # note that we do NOT ch{own,grp} as that would likely fail at this point. # otherwise it is the same as realinstall # Note that we don't need this when using dpadd.mk .libinstall: ${_LIBS} test -d ${DESTDIR}${LIBDIR} || ${INSTALL} -d -m775 ${DESTDIR}${LIBDIR} .for _lib in ${_LIBS:M*.a} ${INSTALL} ${COPY} -m 644 ${_lib} ${DESTDIR}${LIBDIR} ${RANLIB} ${DESTDIR}${LIBDIR}/${_lib} .endfor .for _lib in ${_LIBS:M*.${LD_solink}*:O:u} ${INSTALL} ${COPY} -m ${LIBMODE} ${_lib} ${DESTDIR}${LIBDIR} .if !empty(SHLIB_LINKS) (cd ${DESTDIR}${LIBDIR} && { ${SHLIB_LINKS:O:u:@x@ln -sf ${_lib} $x;@}; }) .endif .endfor @touch ${.TARGET} .if !empty(LIB) STAGE_LIBDIR?= ${STAGE_OBJTOP}${LIBDIR} stage_libs: ${_LIBS} .endif .include .endif diff --git a/contrib/bmake/mk/man.mk b/contrib/bmake/mk/man.mk index 391b08afe491..ce4380fedc55 100644 --- a/contrib/bmake/mk/man.mk +++ b/contrib/bmake/mk/man.mk @@ -1,137 +1,133 @@ -# $Id: man.mk,v 1.20 2012/12/13 01:51:01 sjg Exp $ +# $Id: man.mk,v 1.25 2021/10/31 03:03:14 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN + +OPTIONS_DEFAULT_NO += CMT2DOC .include +.include # unlike bsd.man.mk we handle 3 approaches # 1. install unformated nroff (default) # 2. install formatted pages # 3. install formatted pages but with extension of .0 # sadly we cannot rely on a shell that supports ${foo#...} and ${foo%...} # so we have to use sed(1). # set MANTARGET=cat for formatted pages MANTARGET?= man # set this to .0 for same behavior as bsd.man.mk MCATEXT?= NROFF?= nroff MANDIR?= /usr/share/man MANDOC?= man -.SUFFIXES: .1 .2 .3 .4 .5 .6 .7 .8 .9 .cat1 .cat2 .cat3 .cat4 .cat5 .cat6 \ - .cat7 .cat8 .cat9 +MAN_SUFFIXES?= .1 .2 .3 .4 .5 .6 .7 .8 .9 +.SUFFIXES: ${MAN_SUFFIXES} +.if ${MANTARGET} == "cat" +.SUFFIXES: ${MAN_SUFFIXES:S,.,.cat,} +.endif -.9.cat9 .8.cat8 .7.cat7 .6.cat6 .5.cat5 .4.cat4 .3.cat3 .2.cat2 .1.cat1: +${MAN_SUFFIXES:@s@$s${s:S,.,.cat,}@}: @echo "${NROFF} -${MANDOC} ${.IMPSRC} > ${.TARGET:T}" - @${NROFF} -${MANDOC} ${.IMPSRC} > ${.TARGET:T} || ( rm -f ${.TARGET:T} ; false ) + @${NROFF} -${MANDOC} ${.IMPSRC} > ${.TARGET:T}.new && \ + mv ${.TARGET:T}.new ${.TARGET:T} .if defined(MAN) && !empty(MAN) -# we use cmt2doc.pl to extract manpages from source -# this is triggered by the setting of EXTRACT_MAN or MAN being set but -# not existsing. - -.if !exists(${MAN:[1]}) && !target(${MAN:[1]}) -.if defined(EXTRACT_MAN) && ${EXTRACT_MAN} == "no" -MAN= -.else -.if exists(/usr/local/share/bin/cmt2doc.pl) -CMT2DOC?= cmt2doc.pl +.if ${MK_CMT2DOC} == "yes" +# use cmt2doc.py to extract manpages from source +CMT2DOC?= cmt2doc.py CMT2DOC_OPTS?= ${CMT2DOC_ORGOPT} -pmS${.TARGET:E} -.endif -.ifdef CMT2DOC -.c.8 .c.5 .c.3 .c.4 .c.1 \ - .cc.8 .cc.5 .cc.3 .cc.4 .cc.1 \ - .h.8 .h.5 .h.3 .h.4 .h.1 \ - .sh.8 .sh.5 .sh.3 .sh.4 .sh.1 \ - .pl.8 .pl.5 .pl.3 .pl.4 .pl.1: +CMT2DOC_SUFFIXES+= .c .h .sh .pl .py + +.SUFFIXES: ${CMT2DOC_SUFFIXES} + +${CMT2DOC_SUFFIXES:@s@${MAN_SUFFIXES:@m@$s$m@}@}: @echo "${CMT2DOC} ${.IMPSRC} > ${.TARGET:T}" - @${CMT2DOC} ${CMT2DOC_OPTS} ${.IMPSRC} > ${.TARGET:T} || ( rm -f ${.TARGET:T} ; false ) -.else -MAN= -.endif -.endif + @${CMT2DOC} ${CMT2DOC_OPTS} ${.IMPSRC} > ${.TARGET:T}.new && \ + mv ${.TARGET:T}.new ${.TARGET:T} + .endif _mandir=${DESTDIR}${MANDIR}/${MANTARGET}`echo $$page | sed -e 's/.*\.cat/./' -e 's/.*\.//'` .if ${MANTARGET} == "cat" _mfromdir?=. -MANALL= ${MAN:S/.1$/.cat1/g:S/.2$/.cat2/g:S/.3$/.cat3/g:S/.4$/.cat4/g:S/.5$/.cat5/g:S/.6$/.cat6/g:S/.7$/.cat7/g:S/.8$/.cat8/g:S/.9$/.cat9/g} +MANALL= ${MAN:${MAN_SUFFIXES:S,.,,:@m@S/.$m/.cat$m/@:ts:}} .if ${MCATEXT} == "" _minstpage=`echo $$page | sed 's/\.cat/./'` .else _minstpage=`echo $$page | sed 's/\.cat.*//'`${MCATEXT} .endif .endif .if target(${MAN:[1]}) _mfromdir?=. .endif _mfromdir?=${.CURDIR} MANALL?= ${MAN} _minstpage?=$${page} .endif .if !empty(MANOWN) MAN_INSTALL_OWN ?= -o ${MANOWN} -g ${MANGRP} MAN_CHOWN ?= chown .else MAN_CHOWN = : .endif MINSTALL= ${INSTALL} ${COPY} ${MAN_INSTALL_OWN} -m ${MANMODE} .if defined(MANZ) # chown and chmod are done afterward automatically MCOMPRESS= gzip -cf MCOMPRESSSUFFIX= .gz .endif maninstall: .if defined(MANALL) && !empty(MANALL) @for page in ${MANALL:T}; do \ test -s ${_mfromdir}/$$page || continue; \ dir=${_mandir}; \ test -d $$dir || ${INSTALL} -d ${MAN_INSTALL_OWN} -m 775 $$dir; \ instpage=$${dir}${MANSUBDIR}/${_minstpage}${MCOMPRESSSUFFIX}; \ if [ X"${MCOMPRESS}" = X ]; then \ echo ${MINSTALL} ${_mfromdir}/$$page $$instpage; \ ${MINSTALL} ${_mfromdir}/$$page $$instpage; \ else \ rm -f $$instpage; \ echo ${MCOMPRESS} ${_mfromdir}/$$page \> $$instpage; \ ${MCOMPRESS} ${_mfromdir}/$$page > $$instpage; \ ${MAN_CHOWN} ${MANOWN}:${MANGRP} $$instpage; \ chmod ${MANMODE} $$instpage; \ fi \ done .if defined(MLINKS) && !empty(MLINKS) @set ${MLINKS}; \ while test $$# -ge 2; do \ page=$$1; \ shift; \ dir=${_mandir}; \ l=${_minstpage}${MCOMPRESSSUFFIX}; \ page=$$1; \ shift; \ dir=${_mandir}; \ t=$${dir}${MANSUBDIR}/${_minstpage}${MCOMPRESSSUFFIX}; \ echo $$t -\> $$l; \ rm -f $$t; \ ln -s $$l $$t; \ done .endif .endif .if defined(MANALL) && !empty(MANALL) manall: ${MANALL} all: manall .endif .if defined(CLEANMAN) && !empty(CLEANMAN) cleandir: cleanman cleanman: rm -f ${CLEANMAN} .endif .endif diff --git a/contrib/bmake/mk/meta.autodep.mk b/contrib/bmake/mk/meta.autodep.mk index 5d09dbd88e81..f9ed6d305b99 100644 --- a/contrib/bmake/mk/meta.autodep.mk +++ b/contrib/bmake/mk/meta.autodep.mk @@ -1,321 +1,329 @@ -# $Id: meta.autodep.mk,v 1.54 2021/03/06 17:03:18 sjg Exp $ +# $Id: meta.autodep.mk,v 1.55 2021/12/13 08:12:01 sjg Exp $ # # @(#) Copyright (c) 2010, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # _this ?= ${.PARSEFILE} .if !target(__${_this}__) __${_this}__: .NOTMAIN .-include PICO?= .pico .if defined(SRCS) +.if ${MAKE_VERSION:U0} >= 20211212 +OBJ_EXTENSIONS += ${.SUFFIXES:M*o} +.else # it would be nice to be able to query .SUFFIXES -OBJ_EXTENSIONS+= .o .po .lo ${PICO} +OBJ_EXTENSIONS += .o .po .lo ${PICO} +.endif # explicit dependencies help short-circuit .SUFFIX searches SRCS_DEP_FILTER+= N*.[hly] .for s in ${SRCS:${SRCS_DEP_FILTER:O:u:ts:}} .for e in ${OBJ_EXTENSIONS:O:u} .if !target(${s:T:R}$e) ${s:T:R}$e: $s .endif .endfor .endfor .endif .if make(gendirdeps) # you are supposed to know what you are doing! UPDATE_DEPENDFILE = yes .elif !empty(.TARGETS) && !make(all) # do not update the *depend* files # unless we are building the entire directory or the default target. # NO means don't update .depend - or Makefile.depend* # no means update .depend but not Makefile.depend* UPDATE_DEPENDFILE = NO .elif ${.MAKEFLAGS:M-k} != "" # it is a bad idea to update anything UPDATE_DEPENDFILE = NO .endif _CURDIR ?= ${.CURDIR} _OBJDIR ?= ${.OBJDIR} _OBJTOP ?= ${OBJTOP} _OBJROOT ?= ${OBJROOT:U${_OBJTOP}} _DEPENDFILE := ${_CURDIR}/${.MAKE.DEPENDFILE:T} .if ${.MAKE.LEVEL} > 0 # do not allow auto update if we ever built this dir without filemon NO_FILEMON_COOKIE = .nofilemon CLEANFILES += ${NO_FILEMON_COOKIE} .if ${.MAKE.MODE:Uno:Mnofilemon} != "" UPDATE_DEPENDFILE = NO all: ${NO_FILEMON_COOKIE} ${NO_FILEMON_COOKIE}: .NOMETA @echo UPDATE_DEPENDFILE=NO > ${.TARGET} .elif exists(${NO_FILEMON_COOKIE}) UPDATE_DEPENDFILE = NO .warning ${RELDIR} built with nofilemon; UPDATE_DEPENDFILE=NO .endif .endif .if ${.MAKE.LEVEL} == 0 UPDATE_DEPENDFILE = NO .endif .if !exists(${_DEPENDFILE}) _bootstrap_dirdeps = yes .endif _bootstrap_dirdeps ?= no UPDATE_DEPENDFILE ?= yes .if ${DEBUG_AUTODEP:Uno:@m@${RELDIR:M$m}@} != "" .info ${_DEPENDFILE:S,${SRCTOP}/,,} update=${UPDATE_DEPENDFILE} .endif .if !empty(XMAKE_META_FILE) .if exists(${.OBJDIR}/${XMAKE_META_FILE}) # we cannot get accurate dependencies from an update build UPDATE_DEPENDFILE = NO .else META_XTRAS += ${XMAKE_META_FILE} .endif .endif .if ${_bootstrap_dirdeps} == "yes" || exists(${_DEPENDFILE}) # if it isn't supposed to be touched by us the Makefile should have # UPDATE_DEPENDFILE = no WANT_UPDATE_DEPENDFILE ?= yes .endif .if ${WANT_UPDATE_DEPENDFILE:Uno:tl} != "no" .if ${.MAKE.MODE:Uno:Mmeta*} == "" || ${.MAKE.MODE:Uno:M*read*} != "" UPDATE_DEPENDFILE = no .endif .if ${DEBUG_AUTODEP:Uno:@m@${RELDIR:M$m}@} != "" .info ${_DEPENDFILE:S,${SRCTOP}/,,} update=${UPDATE_DEPENDFILE} .endif .if ${UPDATE_DEPENDFILE:tl} == "yes" # sometimes we want .meta files generated to aid debugging/error detection # but do not want to consider them for dependencies # for example the result of running configure # just make sure this is not empty META_FILE_FILTER ?= N.meta # never consider these META_FILE_FILTER += Ndirdeps.cache* .if !empty(DPADD) # if we have any non-libs in DPADD, # they probably need to be paid attention to .if !empty(DPLIBS) FORCE_DPADD = ${DPADD:${DPLIBS:${M_ListToSkip}}:${DPADD_LAST:${M_ListToSkip}}} .else _nonlibs := ${DPADD:T:Nlib*:N*include} .if !empty(_nonlibs) FORCE_DPADD += ${_nonlibs:@x@${DPADD:M*/$x}@} .endif .endif .endif .if !make(gendirdeps) .END: gendirdeps .endif # if we don't have OBJS, then .depend isn't useful .if !target(.depend) && (!empty(OBJS) || ${.ALLTARGETS:M*.o} != "") # some makefiles and/or targets contain # circular dependencies if you dig too deep # (as meta mode is apt to do) # so we provide a means of suppressing them. # the input to the loop below is target: dependency # with just one dependency per line. # Also some targets are not really local, or use random names. # Use local.autodep.mk to provide local additions! SUPPRESS_DEPEND += \ ${SB:S,/,_,g}* \ *:y.tab.c \ *.c:*.c \ *.h:*.h .NOPATH: .depend # we use ${.MAKE.META.CREATED} to trigger an update but # we process using ${.MAKE.META.FILES} # the double $$ defers initial evaluation # if necessary, we fake .po dependencies, just so the result # in Makefile.depend* is stable # The current objdir may be referred to in various ways OBJDIR_REFS += ${.OBJDIR} ${.OBJDIR:tA} ${_OBJDIR} ${RELOBJTOP}/${RELDIR} _depend = .depend # it would be nice to be able to get .SUFFIXES as ${.SUFFIXES} # we actually only care about the .SUFFIXES of files that might be # generated by tools like yacc. +.if ${MAKE_VERSION:U0} >= 20211212 +DEPEND_SUFFIXES += ${.SUFFIXES:N.sh:N*[0-9aFfglopmnrSsty]} +.else DEPEND_SUFFIXES += .c .h .cpp .hpp .cxx .hxx .cc .hh +.endif .depend: .NOMETA $${.MAKE.META.CREATED} ${_this} @echo "Updating $@: ${.OODATE:T:[1..8]}" @egrep -i '^R .*\.(${DEPEND_SUFFIXES:tl:O:u:S,^.,,:ts|})$$' /dev/null ${.MAKE.META.FILES:T:O:u:${META_FILE_FILTER:ts:}:M*o.meta} | \ sed -e 's, \./, ,${OBJDIR_REFS:O:u:@d@;s, $d/, ,@};/\//d' \ -e 's,^\([^/][^/]*\).meta...[0-9]* ,\1: ,' | \ sort -u | \ while read t d; do \ case "$$d:" in $$t) continue;; esac; \ case "$$t$$d" in ${SUPPRESS_DEPEND:U.:O:u:ts|}) continue;; esac; \ echo $$t $$d; \ done > $@.${.MAKE.PID} @case "${.MAKE.META.FILES:T:M*.po.*}" in \ *.po.*) mv $@.${.MAKE.PID} $@;; \ *) { cat $@.${.MAKE.PID}; \ sed ${OBJ_EXTENSIONS:N.o:N.po:@o@-e 's,\$o:,.o:,'@} \ -e 's,\.o:,.po:,' $@.${.MAKE.PID}; } | sort -u > $@; \ rm -f $@.${.MAKE.PID};; \ esac .else # make sure this exists .depend: # do _not_ assume that .depend is in any fit state for us to use CAT_DEPEND = /dev/null .if ${.MAKE.LEVEL} > 0 .export CAT_DEPEND .endif _depend = .endif .if ${DEBUG_AUTODEP:Uno:@m@${RELDIR:M$m}@} != "" .info ${_DEPENDFILE:S,${SRCTOP}/,,} _depend=${_depend} .endif .if ${UPDATE_DEPENDFILE} == "yes" gendirdeps: ${_DEPENDFILE} .endif .if !target(${_DEPENDFILE}) .if ${_bootstrap_dirdeps} == "yes" # We are boot-strapping a new directory # Use DPADD to seed DIRDEPS .if !empty(DPADD) # anything which matches ${_OBJROOT}* but not ${_OBJTOP}* # needs to be qualified in DIRDEPS # The pseudo machine "host" is used for HOST_TARGET DIRDEPS += \ ${DPADD:M${_OBJTOP}*:H:C,${_OBJTOP}[^/]*/,,:N.:O:u} \ ${DPADD:M${_OBJROOT}*:N${_OBJTOP}*:N${STAGE_ROOT:U${_OBJTOP}}/*:H:S,${_OBJROOT},,:C,^([^/]+)/(.*),\2.\1,:S,${HOST_TARGET}$,host,:N.*:O:u} .endif .endif _gendirdeps_mutex = .if defined(NEED_GENDIRDEPS_MUTEX) # If a src dir gets built with multiple object dirs, # we need a mutex. Obviously, this is best avoided. # Note if .MAKE.DEPENDFILE is common for all ${MACHINE} # you either need to mutex, or ensure only one machine builds at a time! # lockf is an example of a suitable tool LOCKF ?= /usr/bin/lockf .if exists(${LOCKF}) GENDIRDEPS_MUTEXER ?= ${LOCKF} -k .endif .if empty(GENDIRDEPS_MUTEXER) .error NEED_GENDIRDEPS_MUTEX defined, but GENDIRDEPS_MUTEXER not set .else _gendirdeps_mutex = ${GENDIRDEPS_MUTEXER} ${GENDIRDEPS_MUTEX:U${_CURDIR}/Makefile} .endif .endif # If we have META_XTRAS we most likely did not create them # but we need to behave as if we did. # Avoid adding glob patterns to .MAKE.META.CREATED though. .MAKE.META.CREATED += ${META_XTRAS:N*\**:O:u} .if make(gendirdeps) META_FILES = *.meta .elif ${OPTIMIZE_OBJECT_META_FILES:Uno:tl} == "no" META_FILES = ${.MAKE.META.FILES:T:N.depend*:O:u} .else # if we have 1000's of .o.meta, ${PICO}.meta etc we need only look at one set # it is left as an exercise for the reader to work out what this does META_FILES = ${.MAKE.META.FILES:T:N.depend*:N*o.meta:O:u} \ ${.MAKE.META.FILES:T:M*.${.MAKE.META.FILES:M*o.meta:R:E:O:u:[1]}.meta:O:u} .endif .if ${DEBUG_AUTODEP:Uno:@m@${RELDIR:M$m}@} != "" .info ${_DEPENDFILE:S,${SRCTOP}/,,}: ${_depend} ${.PARSEDIR}/gendirdeps.mk ${META2DEPS} xtras=${META_XTRAS} .endif .if ${.MAKE.LEVEL} > 0 .if ${UPDATE_DEPENDFILE} == "yes" .-include <${.CURDIR}/${.MAKE.DEPENDFILE_PREFIX}.options> .endif .if !empty(GENDIRDEPS_FILTER) .export GENDIRDEPS_FILTER .endif # export to avoid blowing command line limit META_FILES := ${META_XTRAS:U:O:u} ${META_FILES:U:T:O:u:${META_FILE_FILTER:ts:}} .export META_FILES .endif # we might have .../ in MAKESYSPATH _makesyspath:= ${_PARSEDIR} ${_DEPENDFILE}: ${_depend} ${.PARSEDIR}/gendirdeps.mk ${META2DEPS} $${.MAKE.META.CREATED} @echo Checking $@: ${.OODATE:T:[1..8]} @(cd . && ${GENDIRDEPS_ENV} \ SKIP_GENDIRDEPS='${SKIP_GENDIRDEPS:O:u}' \ DPADD='${FORCE_DPADD:O:u}' ${_gendirdeps_mutex} \ MAKESYSPATH=${_makesyspath} \ ${.MAKE} -f gendirdeps.mk RELDIR=${RELDIR} _DEPENDFILE=${_DEPENDFILE}) @test -s $@ && touch $@; : .endif .endif .endif .if ${_bootstrap_dirdeps} == "yes" DIRDEPS+= ${RELDIR}.${TARGET_SPEC:U${MACHINE}} # make sure this is included at least once .include .else ${_DEPENDFILE}: .PRECIOUS .endif CLEANFILES += *.meta filemon.* *.db # these make it easy to gather some stats now_utc = ${%s:L:gmtime} start_utc := ${now_utc} meta_stats= meta=${empty(.MAKE.META.FILES):?0:${.MAKE.META.FILES:[#]}} \ created=${empty(.MAKE.META.CREATED):?0:${.MAKE.META.CREATED:[#]}} .if !target(_reldir_finish) #.END: _reldir_finish .if target(gendirdeps) _reldir_finish: gendirdeps .endif _reldir_finish: .NOMETA @echo "${TIME_STAMP} Finished ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" .endif .if !target(_reldir_failed) #.ERROR: _reldir_failed _reldir_failed: .NOMETA @echo "${TIME_STAMP} Failed ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}" .endif .if !defined(WITHOUT_META_STATS) && ${.MAKE.LEVEL} > 0 .END: _reldir_finish .ERROR: _reldir_failed .endif .endif diff --git a/contrib/bmake/mk/meta.stage.mk b/contrib/bmake/mk/meta.stage.mk index 463521b79595..1da45f4f2167 100644 --- a/contrib/bmake/mk/meta.stage.mk +++ b/contrib/bmake/mk/meta.stage.mk @@ -1,369 +1,370 @@ -# $Id: meta.stage.mk,v 1.61 2021/01/31 04:43:12 sjg Exp $ +# $Id: meta.stage.mk,v 1.64 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2011-2017, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # .ifndef NO_STAGING .if !target(__${.PARSEFILE}__) # the guard target is defined later .-include .if ${.MAKE.DEPENDFILE_PREFERENCE:U${.MAKE.DEPENDFILE}:M*.${MACHINE}} != "" # this is generally safer anyway _dirdep ?= ${RELDIR}.${TARGET_SPEC:U${MACHINE}} .else _dirdep ?= ${RELDIR} .endif CLEANFILES+= .dirdep # this allows us to trace dependencies back to their src dir .dirdep: .NOPATH .if !commands(.dirdep) .dirdep: @echo '${_dirdep}' > $@ .endif .if defined(NO_POSIX_SHELL) || ${type printf:L:sh:Mbuiltin} == "" _stage_file_basename = `basename $$f` _stage_target_dirname = `dirname $$t` .else _stage_file_basename = $${f\#\#*/} _stage_target_dirname = $${t%/*} .endif _OBJROOT ?= ${OBJROOT:U${OBJTOP:H}} .if ${_OBJROOT:M*/} != "" _objroot ?= ${_OBJROOT:tA}/ .else _objroot ?= ${_OBJROOT:tA} .endif # make sure this is global _STAGED_DIRS ?= .export _STAGED_DIRS # add each dir we stage to to _STAGED_DIRS # and make sure we have absolute paths so that bmake # will match against .MAKE.META.BAILIWICK STAGE_DIR_FILTER = tA:@d@$${_STAGED_DIRS::+=$$d}$$d@ # convert _STAGED_DIRS into suitable filters GENDIRDEPS_FILTER += Nnot-empty-is-important \ ${_STAGED_DIRS:O:u:M${OBJTOP}*:S,${OBJTOP}/,N,} \ ${_STAGED_DIRS:O:u:M${_objroot}*:N${OBJTOP}*:S,${_objroot},,:C,^([^/]+)/(.*),N\2.\1,:S,${HOST_TARGET},.host,} LN_CP_SCRIPT = LnCp() { \ rm -f $$2 2> /dev/null; \ { [ -z "$$mode" ] && ${LN:Uln} $$1 $$2 2> /dev/null; } || \ - cp -p $$1 $$2; } + cp -p $$1 $$2 2> /dev/null || cp $$1 $$2; } # a staging conflict should cause an error # a warning is handy when bootstapping different options. STAGE_CONFLICT?= ERROR .if ${STAGE_CONFLICT:tl} == "error" STAGE_CONFLICT_ACTION= exit 1 .else STAGE_CONFLICT_ACTION= .endif # it is an error for more than one src dir to try and stage # the same file STAGE_DIRDEP_SCRIPT = ${LN_CP_SCRIPT}; StageDirdep() { \ t=$$1; \ if [ -s $$t.dirdep ]; then \ cmp -s .dirdep $$t.dirdep && return; \ x=`cat $$t.dirdep`; \ case "${RELDIR}:${_dirdep}" in $${x%.*}:$${x}*) ;; \ *) echo "${STAGE_CONFLICT}: $$t installed by $$x not ${_dirdep}" >&2; \ ${STAGE_CONFLICT_ACTION} ;; esac; \ fi; \ LnCp .dirdep $$t.dirdep || exit 1; } # common logic for staging files # this all relies on RELDIR being set to a subdir of SRCTOP # we use ln(1) if we can, else cp(1) STAGE_FILE_SCRIPT = ${STAGE_DIRDEP_SCRIPT}; StageFiles() { \ case "$$1" in "") return;; -m) mode=$$2; shift 2;; *) mode=;; esac; \ dest=$$1; shift; \ mkdir -p $$dest; \ [ -s .dirdep ] || echo '${_dirdep}' > .dirdep; \ for f in "$$@"; do \ case "$$f" in */*) t=$$dest/${_stage_file_basename};; *) t=$$dest/$$f;; esac; \ StageDirdep $$t; \ LnCp $$f $$t || exit 1; \ [ -z "$$mode" ] || chmod $$mode $$t; \ done; :; } STAGE_LINKS_SCRIPT = ${STAGE_DIRDEP_SCRIPT}; StageLinks() { \ case "$$1" in "") return;; --) shift;; -*) ldest= lnf=$$1; shift;; /*) ldest=$$1/;; esac; \ dest=$$1; shift; \ mkdir -p $$dest; \ [ -s .dirdep ] || echo '${_dirdep}' > .dirdep; \ while test $$\# -ge 2; do \ l=$$ldest$$1; shift; \ t=$$dest/$$1; \ case "$$1" in */*) mkdir -p ${_stage_target_dirname};; esac; \ shift; \ StageDirdep $$t; \ rm -f $$t 2>/dev/null; \ ln $$lnf $$l $$t || exit 1; \ done; :; } STAGE_AS_SCRIPT = ${STAGE_DIRDEP_SCRIPT}; StageAs() { \ case "$$1" in "") return;; -m) mode=$$2; shift 2;; *) mode=;; esac; \ dest=$$1; shift; \ mkdir -p $$dest; \ [ -s .dirdep ] || echo '${_dirdep}' > .dirdep; \ while test $$\# -ge 2; do \ s=$$1; shift; \ t=$$dest/$$1; \ case "$$1" in */*) mkdir -p ${_stage_target_dirname};; esac; \ shift; \ StageDirdep $$t; \ LnCp $$s $$t || exit 1; \ [ -z "$$mode" ] || chmod $$mode $$t; \ done; :; } # this is simple, a list of the "staged" files depends on this, _STAGE_BASENAME_USE: .USE .dirdep ${.TARGET:T} @${STAGE_FILE_SCRIPT}; StageFiles ${.TARGET:H:${STAGE_DIR_FILTER}} ${.TARGET:T} _STAGE_AS_BASENAME_USE: .USE .dirdep ${.TARGET:T} @${STAGE_AS_SCRIPT}; StageAs ${.TARGET:H:${STAGE_DIR_FILTER}} ${.TARGET:T} ${STAGE_AS_${.TARGET:T}:U${.TARGET:T}} .endif # first time .if !empty(STAGE_INCSDIR) .if !empty(STAGE_INCS) stage_incs: ${STAGE_INCS:N*\**} .endif .if target(stage_incs) || !empty(.ALLTARGETS:Mstage_includes) STAGE_TARGETS += stage_incs STAGE_INCS ?= ${.ALLSRC:N.dirdep:Nstage_*} stage_includes: stage_incs stage_incs: .dirdep @${STAGE_FILE_SCRIPT}; StageFiles ${STAGE_INCSDIR:${STAGE_DIR_FILTER}} ${STAGE_INCS} @touch $@ .endif .endif .if !empty(STAGE_LIBDIR) .if !empty(STAGE_LIBS) stage_libs: ${STAGE_LIBS:N*\**} .endif .if target(stage_libs) STAGE_TARGETS += stage_libs STAGE_LIBS ?= ${.ALLSRC:N.dirdep:Nstage_*} stage_libs: .dirdep @${STAGE_FILE_SCRIPT}; StageFiles ${STAGE_LIBDIR:${STAGE_DIR_FILTER}} ${STAGE_LIBS} .if !defined(NO_SHLIB_LINKS) .if !empty(SHLIB_LINKS) @${STAGE_LINKS_SCRIPT}; StageLinks -s ${STAGE_LIBDIR:${STAGE_DIR_FILTER}} \ ${SHLIB_LINKS:@t@${STAGE_LIBS:T:M$t.*} $t@} .elif !empty(SHLIB_LINK) && !empty(SHLIB_NAME) @${STAGE_LINKS_SCRIPT}; StageLinks -s ${STAGE_LIBDIR:${STAGE_DIR_FILTER}} ${SHLIB_NAME} ${SHLIB_LINK} .endif .endif @touch $@ .endif .endif .if !empty(STAGE_DIR) STAGE_SETS += _default STAGE_DIR._default = ${STAGE_DIR} STAGE_LINKS_DIR._default = ${STAGE_LINKS_DIR:U${STAGE_OBJTOP}} STAGE_SYMLINKS_DIR._default = ${STAGE_SYMLINKS_DIR:U${STAGE_OBJTOP}} STAGE_FILES._default = ${STAGE_FILES} STAGE_LINKS._default = ${STAGE_LINKS} STAGE_SYMLINKS._default = ${STAGE_SYMLINKS} .endif .if !empty(STAGE_SETS) CLEANFILES += ${STAGE_SETS:@s@stage*$s@} # some makefiles need to populate multiple directories .for s in ${STAGE_SETS:O:u} .if !empty(STAGE_FILES.$s) stage_files.$s: ${STAGE_FILES.$s:N*\**} .endif .if target(stage_files.$s) || target(stage_files${s:S,^,.,:N._default}) STAGE_TARGETS += stage_files STAGE_FILES.$s ?= ${.ALLSRC:N.dirdep:Nstage_*} .if !target(.stage_files.$s) .stage_files.$s: .if $s != "_default" stage_files: stage_files.$s stage_files.$s: .dirdep .else STAGE_FILES ?= ${.ALLSRC:N.dirdep:Nstage_*} stage_files: .dirdep .endif @${STAGE_FILE_SCRIPT}; StageFiles ${FLAGS.$@} ${STAGE_FILES_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_FILES.$s:O} @touch $@ .endif .endif .if !empty(STAGE_LINKS.$s) stage_links.$s: .endif .if target(stage_links.$s) || target(stage_links${s:S,^,.,:N._default}) STAGE_LINKS_DIR.$s ?= ${STAGE_OBJTOP} STAGE_TARGETS += stage_links .if !target(.stage_links.$s) .stage_links.$s: .if $s != "_default" stage_links: stage_links.$s stage_links.$s: .dirdep .else stage_links: .dirdep .endif @${STAGE_LINKS_SCRIPT}; StageLinks ${STAGE_LINKS_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_LINKS.$s} @touch $@ .endif .endif .if !empty(STAGE_SYMLINKS.$s) stage_symlinks.$s: .endif .if target(stage_symlinks.$s) || target(stage_symlinks${s:S,^,.,:N._default}) STAGE_SYMLINKS_DIR.$s ?= ${STAGE_OBJTOP} STAGE_TARGETS += stage_symlinks .if !target(.stage_symlinks.$s) .stage_symlinks.$s: .if $s != "_default" stage_symlinks: stage_symlinks.$s stage_symlinks.$s: .dirdep .else stage_symlinks: .dirdep .endif @${STAGE_LINKS_SCRIPT}; StageLinks -s ${STAGE_SYMLINKS_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_SYMLINKS.$s} @touch $@ .endif .endif .endfor .endif .if !empty(STAGE_AS_SETS) CLEANFILES += ${STAGE_AS_SETS:@s@stage*$s@} # sometimes things need to be renamed as they are staged # each ${file} will be staged as ${STAGE_AS_${file:T}} # one could achieve the same with SYMLINKS -# stage_as_and_symlink makes the original name a symlink to the new name +# stage_as_and_symlink makes the original name (or ${STAGE_LINK_AS_${name}}) +# a symlink to the new name # it is the same as using stage_as and stage_symlinks but ensures # both operations happen together .for s in ${STAGE_AS_SETS:O:u} .if !empty(STAGE_AS.$s) stage_as.$s: ${STAGE_AS.$s:N*\**} .endif .if target(stage_as.$s) STAGE_TARGETS += stage_as STAGE_AS.$s ?= ${.ALLSRC:N.dirdep:Nstage_*} .if !target(.stage_as.$s) .stage_as.$s: stage_as: stage_as.$s stage_as.$s: .dirdep @${STAGE_AS_SCRIPT}; StageAs ${FLAGS.$@} ${STAGE_FILES_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_AS.$s:O:@f@$f ${STAGE_AS_${f:tA}:U${STAGE_AS_${f:T}:U${f:T}}}@} @touch $@ .endif .endif .if !empty(STAGE_AS_AND_SYMLINK.$s) stage_as_and_symlink.$s: ${STAGE_AS_AND_SYMLINK.$s:N*\**} .endif .if target(stage_as_and_symlink.$s) STAGE_TARGETS += stage_as_and_symlink STAGE_AS_AND_SYMLINK.$s ?= ${.ALLSRC:N.dirdep:Nstage_*} .if !target(.stage_as_and_symlink.$s) .stage_as_and_symlink.$s: stage_as_and_symlink: stage_as_and_symlink.$s stage_as_and_symlink.$s: .dirdep @${STAGE_AS_SCRIPT}; StageAs ${FLAGS.$@} ${STAGE_FILES_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_AS_AND_SYMLINK.$s:O:@f@$f ${STAGE_AS_${f:tA}:U${STAGE_AS_${f:T}:U${f:T}}}@} - @${STAGE_LINKS_SCRIPT}; StageLinks -s ${STAGE_FILES_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_AS_AND_SYMLINK.$s:O:@f@${STAGE_AS_${f:tA}:U${STAGE_AS_${f:T}:U${f:T}}} $f@} + @${STAGE_LINKS_SCRIPT}; StageLinks -s ${STAGE_FILES_DIR.$s:U${STAGE_DIR.$s}:${STAGE_DIR_FILTER}} ${STAGE_AS_AND_SYMLINK.$s:O:@f@${STAGE_AS_${f:tA}:U${STAGE_AS_${f:T}:U${f:T}}} ${STAGE_LINK_AS_${f}:U$f}@} @touch $@ .endif .endif .endfor .endif CLEANFILES += ${STAGE_TARGETS} stage_incs stage_includes # this lot also only makes sense the first time... .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN # stage_*links usually needs to follow any others. # for non-jobs mode the order here matters staging: ${STAGE_TARGETS:N*_links} ${STAGE_TARGETS:M*_links} .if ${.MAKE.JOBS:U0} > 0 && ${STAGE_TARGETS:U:M*_links} != "" # the above isn't sufficient .for t in ${STAGE_TARGETS:N*links:O:u} .ORDER: $t stage_links .endfor .endif # generally we want staging to wait until everything else is done STAGING_WAIT ?= .WAIT .if ${.MAKE.LEVEL} > 0 all: ${STAGING_WAIT} staging .endif .if exists(${.PARSEDIR}/stage-install.sh) && !defined(STAGE_INSTALL) # this will run install(1) and then followup with .dirdep files. STAGE_INSTALL := sh ${.PARSEDIR:tA}/stage-install.sh INSTALL="${INSTALL}" OBJDIR=${.OBJDIR:tA} .endif # if ${INSTALL} gets run during 'all' assume it is for staging? .if ${.TARGETS:Nall} == "" && defined(STAGE_INSTALL) INSTALL := ${STAGE_INSTALL} .if target(beforeinstall) beforeinstall: .dirdep .endif .endif .NOPATH: ${STAGE_FILES} .if !empty(STAGE_TARGETS) # for backwards compat make sure they exist ${STAGE_TARGETS}: .NOPATH: ${CLEANFILES} MK_STALE_STAGED?= no .if ${MK_STALE_STAGED} == "yes" all: stale_staged # get a list of paths that we have just staged # get a list of paths that we have previously staged to those same dirs # anything in the 2nd list but not the first is stale - remove it. stale_staged: staging .NOMETA @egrep '^[WL] .*${STAGE_OBJTOP}' /dev/null ${.MAKE.META.FILES:M*stage_*} | \ sed "/\.dirdep/d;s,.* '*\(${STAGE_OBJTOP}/[^ '][^ ']*\).*,\1," | \ sort > ${.TARGET}.staged1 @grep -l '${_dirdep}' /dev/null ${_STAGED_DIRS:M${STAGE_OBJTOP}*:O:u:@d@$d/*.dirdep@} | \ sed 's,\.dirdep,,' | sort > ${.TARGET}.staged2 @comm -13 ${.TARGET}.staged1 ${.TARGET}.staged2 > ${.TARGET}.stale @test ! -s ${.TARGET}.stale || { \ echo "Removing stale staged files..."; \ sed 's,.*,& &.dirdep,' ${.TARGET}.stale | xargs rm -f; } .endif .endif .endif .endif diff --git a/contrib/bmake/mk/meta.sys.mk b/contrib/bmake/mk/meta.sys.mk index 77b4893a8785..7cc802e2f2fe 100644 --- a/contrib/bmake/mk/meta.sys.mk +++ b/contrib/bmake/mk/meta.sys.mk @@ -1,167 +1,179 @@ -# $Id: meta.sys.mk,v 1.38 2020/08/19 17:51:53 sjg Exp $ +# $Id: meta.sys.mk,v 1.42 2021/12/13 05:50:55 sjg Exp $ # -# @(#) Copyright (c) 2010-2020, Simon J. Gerraty +# @(#) Copyright (c) 2010-2021, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # include this if you want to enable meta mode # for maximum benefit, requires filemon(4) driver. .if ${MAKE_VERSION:U0} > 20100901 .if !target(.ERROR) .-include # absolute path to what we are reading. _PARSEDIR = ${.PARSEDIR:tA} .if !defined(SYS_MK_DIR) SYS_MK_DIR := ${_PARSEDIR} .endif META_MODE += meta verbose +.if ${MAKE_VERSION:U0} > 20130323 && empty(.MAKE.PATH_FILEMON) +# we do not support filemon +META_MODE += nofilemon +MKDEP_MK ?= auto.dep.mk +.endif + .MAKE.MODE ?= ${META_MODE} -.if ${.MAKE.LEVEL} == 0 +_filemon := ${.MAKE.PATH_FILEMON:U/dev/filemon} + +.if empty(UPDATE_DEPENDFILE) _make_mode := ${.MAKE.MODE} ${META_MODE} .if ${_make_mode:M*read*} != "" || ${_make_mode:M*nofilemon*} != "" # tell everyone we are not updating Makefile.depend* UPDATE_DEPENDFILE = NO .export UPDATE_DEPENDFILE .endif -.if ${UPDATE_DEPENDFILE:Uyes:tl} == "no" && !exists(/dev/filemon) +.if ${_filemon:T:Mfilemon} == "filemon" +.if ${UPDATE_DEPENDFILE:Uyes:tl} == "no" && !exists(${_filemon}) # we should not get upset META_MODE += nofilemon .export META_MODE .endif .endif +.endif .if !defined(NO_SILENT) .if ${MAKE_VERSION} > 20110818 # only be silent when we have a .meta file META_MODE += silent=yes .else .SILENT: .endif .endif # we use the pseudo machine "host" for the build host. # this should be taken care of before we get here .if ${OBJTOP:Ua} == ${HOST_OBJTOP:Ub} MACHINE = host .endif .if !defined(MACHINE0) # it can be handy to know which MACHINE kicked off the build # for example, if using Makefild.depend for multiple machines, # allowing only MACHINE0 to update can keep things simple. MACHINE0 := ${MACHINE} .export MACHINE0 .endif .if !defined(META2DEPS) .if defined(PYTHON) && exists(${PYTHON}) # we prefer the python version of this - it is much faster META2DEPS ?= ${.PARSEDIR}/meta2deps.py .else META2DEPS ?= ${.PARSEDIR}/meta2deps.sh .endif META2DEPS := ${META2DEPS} .export META2DEPS .endif MAKE_PRINT_VAR_ON_ERROR += \ .ERROR_TARGET \ .ERROR_META_FILE \ .MAKE.LEVEL \ MAKEFILE \ .MAKE.MODE .if !defined(SB) && defined(SRCTOP) SB = ${SRCTOP:H} .endif ERROR_LOGDIR ?= ${SB}/error meta_error_log = ${ERROR_LOGDIR}/meta-${.MAKE.PID}.log # we are not interested in make telling us a failure happened elsewhere .ERROR: _metaError _metaError: .NOMETA .NOTMAIN -@[ "${.ERROR_META_FILE}" ] && { \ grep -q 'failure has been detected in another branch' ${.ERROR_META_FILE} && exit 0; \ mkdir -p ${meta_error_log:H}; \ cp ${.ERROR_META_FILE} ${meta_error_log}; \ echo "ERROR: log ${meta_error_log}" >&2; }; : .endif # Are we, after all, in meta mode? .if ${.MAKE.MODE:Uno:Mmeta*} != "" -MKDEP_MK = meta.autodep.mk +MKDEP_MK ?= meta.autodep.mk .if ${.MAKE.MAKEFILES:M*sys.dependfile.mk} == "" # this does all the smarts of setting .MAKE.DEPENDFILE .-include # check if we got anything sane .if ${.MAKE.DEPENDFILE} == ".depend" .undef .MAKE.DEPENDFILE .endif .MAKE.DEPENDFILE ?= Makefile.depend .endif # we can afford to use cookies to prevent some targets # re-running needlessly META_COOKIE_TOUCH?= touch ${COOKIE.${.TARGET}:U${.OBJDIR}/${.TARGET:T}} META_NOPHONY= META_NOECHO= : # some targets involve old pre-built targets # ignore mtime of shell # and mtime of makefiles does not matter in meta mode .MAKE.META.IGNORE_PATHS += \ ${MAKEFILE} \ ${MAKE_SHELL} \ ${SHELL} \ ${SYS_MK_DIR} \ .if ${UPDATE_DEPENDFILE:Uyes:tl} != "no" .if ${.MAKEFLAGS:Uno:M-k} != "" # make this more obvious .warning Setting UPDATE_DEPENDFILE=NO due to -k UPDATE_DEPENDFILE= NO .export UPDATE_DEPENDFILE -.elif !exists(/dev/filemon) -.error ${.newline}ERROR: The filemon module (/dev/filemon) is not loaded. +.elif ${_filemon:T} == "filemon" && !exists(${_filemon}) +.error ${.newline}ERROR: The filemon module (${_filemon}) is not loaded. .endif .endif .if ${.MAKE.LEVEL} == 0 +.if ${MK_DIRDEPS_BUILD:Uyes} == "yes" # make sure dirdeps target exists and do it first all: dirdeps .WAIT dirdeps: .NOPATH: dirdeps .if defined(ALL_MACHINES) # the first .MAIN: is what counts # by default dirdeps is all we want at level0 .MAIN: dirdeps .endif +.endif .endif .else META_COOKIE_TOUCH= # some targets need to be .PHONY in non-meta mode META_NOPHONY= .PHONY META_NOECHO= echo .endif .endif diff --git a/contrib/bmake/mk/meta2deps.py b/contrib/bmake/mk/meta2deps.py index 193e303de3da..76ac59465b9b 100755 --- a/contrib/bmake/mk/meta2deps.py +++ b/contrib/bmake/mk/meta2deps.py @@ -1,768 +1,783 @@ #!/usr/bin/env python from __future__ import print_function """ This script parses each "meta" file and extracts the information needed to deduce build and src dependencies. It works much the same as the original shell script, but is *much* more efficient. The parsing work is handled by the class MetaFile. We only pay attention to a subset of the information in the "meta" files. Specifically: 'CWD' to initialize our notion. 'C' to track chdir(2) on a per process basis 'R' files read are what we really care about. directories read, provide a clue to resolving subsequent relative paths. That is if we cannot find them relative to 'cwd', we check relative to the last dir read. 'W' files opened for write or read-write, for filemon V3 and earlier. 'E' files executed. 'L' files linked 'V' the filemon version, this record is used as a clue that we have reached the interesting bit. """ """ RCSid: - $Id: meta2deps.py,v 1.38 2021/06/17 05:20:08 sjg Exp $ + $Id: meta2deps.py,v 1.40 2021/12/13 19:32:46 sjg Exp $ Copyright (c) 2011-2020, Simon J. Gerraty Copyright (c) 2011-2017, Juniper Networks, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. """ import os, re, sys def resolve(path, cwd, last_dir=None, debug=0, debug_out=sys.stderr): """ Return an absolute path, resolving via cwd or last_dir if needed. """ if path.endswith('/.'): path = path[0:-2] if len(path) > 0 and path[0] == '/': if os.path.exists(path): return path if debug > 2: print("skipping non-existent:", path, file=debug_out) return None if path == '.': return cwd if path.startswith('./'): return cwd + path[1:] if last_dir == cwd: last_dir = None for d in [last_dir, cwd]: if not d: continue if path == '..': dw = d.split('/') p = '/'.join(dw[:-1]) if not p: p = '/' return p p = '/'.join([d,path]) if debug > 2: print("looking for:", p, end=' ', file=debug_out) if not os.path.exists(p): if debug > 2: print("nope", file=debug_out) p = None continue if debug > 2: print("found:", p, file=debug_out) return p return None def cleanpath(path): """cleanup path without using realpath(3)""" if path.startswith('/'): r = '/' else: r = '' p = [] w = path.split('/') for d in w: if not d or d == '.': continue if d == '..': try: p.pop() continue except: break p.append(d) return r + '/'.join(p) def abspath(path, cwd, last_dir=None, debug=0, debug_out=sys.stderr): """ Return an absolute path, resolving via cwd or last_dir if needed. this gets called a lot, so we try to avoid calling realpath. """ rpath = resolve(path, cwd, last_dir, debug, debug_out) if rpath: path = rpath elif len(path) > 0 and path[0] == '/': return None if (path.find('/') < 0 or path.find('./') > 0 or path.endswith('/..')): path = cleanpath(path) return path def sort_unique(list, cmp=None, key=None, reverse=False): if sys.version_info[0] == 2: list.sort(cmp, key, reverse) else: list.sort(reverse=reverse) nl = [] le = None for e in list: if e == le: continue le = e nl.append(e) return nl def add_trims(x): return ['/' + x + '/', '/' + x, x + '/', x] +def target_spec_exts(target_spec): + """return a list of dirdep extensions that could match target_spec""" + + if target_spec.find(',') < 0: + return ['.'+target_spec] + w = target_spec.split(',') + n = len(w) + e = [] + while n > 0: + e.append('.'+','.join(w[0:n])) + n -= 1 + return e + class MetaFile: """class to parse meta files generated by bmake.""" conf = None dirdep_re = None host_target = None srctops = [] objroots = [] excludes = [] seen = {} obj_deps = [] src_deps = [] file_deps = [] def __init__(self, name, conf={}): """if name is set we will parse it now. conf can have the follwing keys: SRCTOPS list of tops of the src tree(s). CURDIR the src directory 'bmake' was run from. RELDIR the relative path from SRCTOP to CURDIR MACHINE the machine we built for. set to 'none' if we are not cross-building. More specifically if machine cannot be deduced from objdirs. TARGET_SPEC Sometimes MACHINE isn't enough. HOST_TARGET when we build for the pseudo machine 'host' the object tree uses HOST_TARGET rather than MACHINE. OBJROOTS a list of the common prefix for all obj dirs it might end in '/' or '-'. DPDEPS names an optional file to which per file dependencies will be appended. For example if 'some/path/foo.h' is read from SRCTOP then 'DPDEPS_some/path/foo.h +=' "RELDIR" is output. This can allow 'bmake' to learn all the dirs within the tree that depend on 'foo.h' EXCLUDES A list of paths to ignore. ccache(1) can otherwise be trouble. debug desired debug level debug_out open file to send debug output to (sys.stderr) """ self.name = name self.debug = conf.get('debug', 0) self.debug_out = conf.get('debug_out', sys.stderr) self.machine = conf.get('MACHINE', '') self.machine_arch = conf.get('MACHINE_ARCH', '') - self.target_spec = conf.get('TARGET_SPEC', '') + self.target_spec = conf.get('TARGET_SPEC', self.machine) + self.exts = target_spec_exts(self.target_spec) self.curdir = conf.get('CURDIR') self.reldir = conf.get('RELDIR') self.dpdeps = conf.get('DPDEPS') self.line = 0 if not self.conf: # some of the steps below we want to do only once self.conf = conf self.host_target = conf.get('HOST_TARGET') for srctop in conf.get('SRCTOPS', []): if srctop[-1] != '/': srctop += '/' if not srctop in self.srctops: self.srctops.append(srctop) _srctop = os.path.realpath(srctop) if _srctop[-1] != '/': _srctop += '/' if not _srctop in self.srctops: self.srctops.append(_srctop) trim_list = add_trims(self.machine) if self.machine == 'host': trim_list += add_trims(self.host_target) - if self.target_spec: + if self.target_spec != self.machine: trim_list += add_trims(self.target_spec) for objroot in conf.get('OBJROOTS', []): for e in trim_list: if objroot.endswith(e): # this is not what we want - fix it objroot = objroot[0:-len(e)] if objroot[-1] != '/': objroot += '/' if not objroot in self.objroots: self.objroots.append(objroot) _objroot = os.path.realpath(objroot) if objroot[-1] == '/': _objroot += '/' if not _objroot in self.objroots: self.objroots.append(_objroot) # we want the longest match self.srctops.sort(reverse=True) self.objroots.sort(reverse=True) self.excludes = conf.get('EXCLUDES', []) if self.debug: print("host_target=", self.host_target, file=self.debug_out) print("srctops=", self.srctops, file=self.debug_out) print("objroots=", self.objroots, file=self.debug_out) print("excludes=", self.excludes, file=self.debug_out) + print("ext_list=", self.exts, file=self.debug_out) self.dirdep_re = re.compile(r'([^/]+)/(.+)') if self.dpdeps and not self.reldir: if self.debug: print("need reldir:", end=' ', file=self.debug_out) if self.curdir: srctop = self.find_top(self.curdir, self.srctops) if srctop: self.reldir = self.curdir.replace(srctop,'') if self.debug: print(self.reldir, file=self.debug_out) if not self.reldir: self.dpdeps = None # we cannot do it? self.cwd = os.getcwd() # make sure this is initialized self.last_dir = self.cwd if name: self.try_parse() def reset(self): """reset state if we are being passed meta files from multiple directories.""" self.seen = {} self.obj_deps = [] self.src_deps = [] self.file_deps = [] def dirdeps(self, sep='\n'): """return DIRDEPS""" return sep.strip() + sep.join(self.obj_deps) def src_dirdeps(self, sep='\n'): """return SRC_DIRDEPS""" return sep.strip() + sep.join(self.src_deps) def file_depends(self, out=None): """Append DPDEPS_${file} += ${RELDIR} for each file we saw, to the output file.""" if not self.reldir: return None for f in sort_unique(self.file_deps): print('DPDEPS_%s += %s' % (f, self.reldir), file=out) # these entries provide for reverse DIRDEPS lookup for f in self.obj_deps: print('DEPDIRS_%s += %s' % (f, self.reldir), file=out) def seenit(self, dir): """rememer that we have seen dir.""" self.seen[dir] = 1 def add(self, list, data, clue=''): """add data to list if it isn't already there.""" if data not in list: list.append(data) if self.debug: print("%s: %sAdd: %s" % (self.name, clue, data), file=self.debug_out) def find_top(self, path, list): """the logical tree may be split across multiple trees""" for top in list: if path.startswith(top): if self.debug > 2: print("found in", top, file=self.debug_out) return top return None def find_obj(self, objroot, dir, path, input): """return path within objroot, taking care of .dirdep files""" ddep = None for ddepf in [path + '.dirdep', dir + '/.dirdep']: if not ddep and os.path.exists(ddepf): ddep = open(ddepf, 'r').readline().strip('# \n') if self.debug > 1: print("found %s: %s\n" % (ddepf, ddep), file=self.debug_out) - if ddep.endswith(self.machine): - ddep = ddep[0:-(1+len(self.machine))] - elif self.target_spec and ddep.endswith(self.target_spec): - ddep = ddep[0:-(1+len(self.target_spec))] + for e in self.exts: + if ddep.endswith(e): + ddep = ddep[0:-len(e)] + break if not ddep: # no .dirdeps, so remember that we've seen the raw input self.seenit(input) self.seenit(dir) if self.machine == 'none': if dir.startswith(objroot): return dir.replace(objroot,'') return None m = self.dirdep_re.match(dir.replace(objroot,'')) if m: ddep = m.group(2) dmachine = m.group(1) if dmachine != self.machine: if not (self.machine == 'host' and dmachine == self.host_target): if self.debug > 2: print("adding .%s to %s" % (dmachine, ddep), file=self.debug_out) ddep += '.' + dmachine return ddep def try_parse(self, name=None, file=None): """give file and line number causing exception""" try: self.parse(name, file) except: # give a useful clue print('{}:{}: '.format(self.name, self.line), end=' ', file=sys.stderr) raise def parse(self, name=None, file=None): """A meta file looks like: # Meta data file "path" CMD "command-line" CWD "cwd" TARGET "target" -- command output -- -- filemon acquired metadata -- # buildmon version 3 V 3 C "pid" "cwd" E "pid" "path" F "pid" "child" R "pid" "path" W "pid" "path" X "pid" "status" D "pid" "path" L "pid" "src" "target" M "pid" "old" "new" S "pid" "path" # Bye bye We go to some effort to avoid processing a dependency more than once. Of the above record types only C,E,F,L,R,V and W are of interest. """ version = 0 # unknown if name: self.name = name; if file: f = file cwd = self.last_dir = self.cwd else: f = open(self.name, 'r') skip = True pid_cwd = {} pid_last_dir = {} last_pid = 0 self.line = 0 if self.curdir: self.seenit(self.curdir) # we ignore this interesting = 'CEFLRV' for line in f: self.line += 1 # ignore anything we don't care about if not line[0] in interesting: continue if self.debug > 2: print("input:", line, end=' ', file=self.debug_out) w = line.split() if skip: if w[0] == 'V': skip = False version = int(w[1]) """ if version < 4: # we cannot ignore 'W' records # as they may be 'rw' interesting += 'W' """ elif w[0] == 'CWD': self.cwd = cwd = self.last_dir = w[1] self.seenit(cwd) # ignore this if self.debug: print("%s: CWD=%s" % (self.name, cwd), file=self.debug_out) continue pid = int(w[1]) if pid != last_pid: if last_pid: pid_last_dir[last_pid] = self.last_dir cwd = pid_cwd.get(pid, self.cwd) self.last_dir = pid_last_dir.get(pid, self.cwd) last_pid = pid # process operations if w[0] == 'F': npid = int(w[2]) pid_cwd[npid] = cwd pid_last_dir[npid] = cwd last_pid = npid continue elif w[0] == 'C': cwd = abspath(w[2], cwd, None, self.debug, self.debug_out) if not cwd: cwd = w[2] if self.debug > 1: print("missing cwd=", cwd, file=self.debug_out) if cwd.endswith('/.'): cwd = cwd[0:-2] self.last_dir = pid_last_dir[pid] = cwd pid_cwd[pid] = cwd if self.debug > 1: print("cwd=", cwd, file=self.debug_out) continue if w[2] in self.seen: if self.debug > 2: print("seen:", w[2], file=self.debug_out) continue # file operations if w[0] in 'ML': # these are special, tread src as read and # target as write self.parse_path(w[2].strip("'"), cwd, 'R', w) self.parse_path(w[3].strip("'"), cwd, 'W', w) continue elif w[0] in 'ERWS': path = w[2] if path == '.': continue self.parse_path(path, cwd, w[0], w) assert(version > 0) if not file: f.close() def is_src(self, base, dir, rdir): """is base in srctop""" for dir in [dir,rdir]: if not dir: continue path = '/'.join([dir,base]) srctop = self.find_top(path, self.srctops) if srctop: if self.dpdeps: self.add(self.file_deps, path.replace(srctop,''), 'file') self.add(self.src_deps, dir.replace(srctop,''), 'src') self.seenit(dir) return True return False def parse_path(self, path, cwd, op=None, w=[]): """look at a path for the op specified""" if not op: op = w[0] # we are never interested in .dirdep files as dependencies if path.endswith('.dirdep'): return for p in self.excludes: if p and path.startswith(p): if self.debug > 2: print("exclude:", p, path, file=self.debug_out) return # we don't want to resolve the last component if it is # a symlink path = resolve(path, cwd, self.last_dir, self.debug, self.debug_out) if not path: return dir,base = os.path.split(path) if dir in self.seen: if self.debug > 2: print("seen:", dir, file=self.debug_out) return # we can have a path in an objdir which is a link # to the src dir, we may need to add dependencies for each rdir = dir dir = abspath(dir, cwd, self.last_dir, self.debug, self.debug_out) if dir: rdir = os.path.realpath(dir) else: dir = rdir if rdir == dir: rdir = None # now put path back together path = '/'.join([dir,base]) if self.debug > 1: print("raw=%s rdir=%s dir=%s path=%s" % (w[2], rdir, dir, path), file=self.debug_out) if op in 'RWS': if path in [self.last_dir, cwd, self.cwd, self.curdir]: if self.debug > 1: print("skipping:", path, file=self.debug_out) return if os.path.isdir(path): if op in 'RW': self.last_dir = path; if self.debug > 1: print("ldir=", self.last_dir, file=self.debug_out) return if op in 'ER': # finally, we get down to it if dir == self.cwd or dir == self.curdir: return if self.is_src(base, dir, rdir): self.seenit(w[2]) if not rdir: return objroot = None for dir in [dir,rdir]: if not dir: continue objroot = self.find_top(dir, self.objroots) if objroot: break if objroot: ddep = self.find_obj(objroot, dir, path, w[2]) if ddep: self.add(self.obj_deps, ddep, 'obj') if self.dpdeps and objroot.endswith('/stage/'): sp = '/'.join(path.replace(objroot,'').split('/')[1:]) self.add(self.file_deps, sp, 'file') else: # don't waste time looking again self.seenit(w[2]) self.seenit(dir) def main(argv, klass=MetaFile, xopts='', xoptf=None): """Simple driver for class MetaFile. Usage: script [options] [key=value ...] "meta" ... Options and key=value pairs contribute to the dictionary passed to MetaFile. -S "SRCTOP" add "SRCTOP" to the "SRCTOPS" list. -C "CURDIR" -O "OBJROOT" add "OBJROOT" to the "OBJROOTS" list. -m "MACHINE" -a "MACHINE_ARCH" -H "HOST_TARGET" -D "DPDEPS" -d bumps debug level """ import getopt # import Psyco if we can # it can speed things up quite a bit have_psyco = 0 try: import psyco psyco.full() have_psyco = 1 except: pass conf = { 'SRCTOPS': [], 'OBJROOTS': [], 'EXCLUDES': [], } try: machine = os.environ['MACHINE'] if machine: conf['MACHINE'] = machine machine_arch = os.environ['MACHINE_ARCH'] if machine_arch: conf['MACHINE_ARCH'] = machine_arch srctop = os.environ['SB_SRC'] if srctop: conf['SRCTOPS'].append(srctop) objroot = os.environ['SB_OBJROOT'] if objroot: conf['OBJROOTS'].append(objroot) except: pass debug = 0 output = True opts, args = getopt.getopt(argv[1:], 'a:dS:C:O:R:m:D:H:qT:X:' + xopts) for o, a in opts: if o == '-a': conf['MACHINE_ARCH'] = a elif o == '-d': debug += 1 elif o == '-q': output = False elif o == '-H': conf['HOST_TARGET'] = a elif o == '-S': if a not in conf['SRCTOPS']: conf['SRCTOPS'].append(a) elif o == '-C': conf['CURDIR'] = a elif o == '-O': if a not in conf['OBJROOTS']: conf['OBJROOTS'].append(a) elif o == '-R': conf['RELDIR'] = a elif o == '-D': conf['DPDEPS'] = a elif o == '-m': conf['MACHINE'] = a elif o == '-T': conf['TARGET_SPEC'] = a elif o == '-X': if a not in conf['EXCLUDES']: conf['EXCLUDES'].append(a) elif xoptf: xoptf(o, a, conf) conf['debug'] = debug # get any var=val assignments eaten = [] for a in args: if a.find('=') > 0: k,v = a.split('=') if k in ['SRCTOP','OBJROOT','SRCTOPS','OBJROOTS']: if k == 'SRCTOP': k = 'SRCTOPS' elif k == 'OBJROOT': k = 'OBJROOTS' if v not in conf[k]: conf[k].append(v) else: conf[k] = v eaten.append(a) continue break for a in eaten: args.remove(a) debug_out = conf.get('debug_out', sys.stderr) if debug: print("config:", file=debug_out) print("psyco=", have_psyco, file=debug_out) for k,v in list(conf.items()): print("%s=%s" % (k,v), file=debug_out) m = None for a in args: if a.endswith('.meta'): if not os.path.exists(a): continue m = klass(a, conf) elif a.startswith('@'): # there can actually multiple files per line for line in open(a[1:]): for f in line.strip().split(): if not os.path.exists(f): continue m = klass(f, conf) if output and m: print(m.dirdeps()) print(m.src_dirdeps('\nsrc:')) dpdeps = conf.get('DPDEPS') if dpdeps: m.file_depends(open(dpdeps, 'w')) return m if __name__ == '__main__': try: main(sys.argv) except: # yes, this goes to stdout print("ERROR: ", sys.exc_info()[1]) raise diff --git a/contrib/bmake/mk/obj.mk b/contrib/bmake/mk/obj.mk index 487e25a55b6c..0df5a087f972 100644 --- a/contrib/bmake/mk/obj.mk +++ b/contrib/bmake/mk/obj.mk @@ -1,113 +1,113 @@ -# $Id: obj.mk,v 1.16 2020/08/19 17:51:53 sjg Exp $ +# $Id: obj.mk,v 1.17 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 1999-2010, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # .if !target(__${.PARSEFILE:S,bsd.,,}__) -__${.PARSEFILE:S,bsd.,,}__: +__${.PARSEFILE:S,bsd.,,}__: .NOTMAIN .include ECHO_TRACE ?= echo .if ${MK_OBJDIRS} == "no" obj: objlink: objwarn: .else # this has to match how make behaves .if defined(MAKEOBJDIRPREFIX) || defined(MAKEOBJDIR) .if defined(MAKEOBJDIRPREFIX) __objdir:= ${MAKEOBJDIRPREFIX}${.CURDIR} .else __objdir:= ${MAKEOBJDIR} .endif .else __objdir= ${__objlink} .endif .if defined(OBJMACHINE) __objlink= obj.${MACHINE} .else __objlink= obj .endif .if ${MK_AUTO_OBJ} == "yes" .-include "auto.obj.mk" .endif .NOPATH: ${__objdir} .PHONY: obj obj: _SUBDIRUSE @if test ! -d ${__objdir}/.; then \ mkdir -p ${__objdir}; \ if test ! -d ${__objdir}; then \ mkdir ${__objdir}; exit 1; \ fi; \ ${ECHO_TRACE} "[Creating objdir ${__objdir}...]" >&2; \ fi .if !target(_SUBDIRUSE) # this just allows us to be included by ourselves _SUBDIRUSE: .endif # so we can interact with freebsd makefiles .if !target(objwarn) objwarn: .if ${.OBJDIR} == ${.CURDIR} @echo "Warning Object directory is ${.CURDIR}" .elif ${.OBJDIR} != ${__objdir} @echo "Warning Object directory is ${.OBJDIR} vs. ${__objdir}" .endif .endif .if !target(objlink) objlink: .if ${__objdir:T} != ${__objlink} @if test -d ${__objdir}/.; then \ ${RM} -f ${.CURDIR}/${__objlink}; \ ${LN} -s ${__objdir} ${.CURDIR}/${__objlink}; \ echo "${__objlink} -> ${__objdir}"; \ else \ echo "No ${__objdir} to link to - do a 'make obj'"; \ fi .endif .endif .endif _CURDIR?= ${.CURDIR} _OBJDIR?= ${.OBJDIR} .if !target(print-objdir) print-objdir: @echo ${_OBJDIR} .endif .if !target(whereobj) whereobj: @echo ${_OBJDIR} .endif .if !target(destroy) .if ${.CURDIR} != ${.OBJDIR} destroy: (cd ${_CURDIR} && rm -rf ${_OBJDIR}) .else destroy: clean .endif .endif .endif diff --git a/contrib/bmake/mk/options.mk b/contrib/bmake/mk/options.mk index eb5253a6b7e8..bf78ba24f1ca 100644 --- a/contrib/bmake/mk/options.mk +++ b/contrib/bmake/mk/options.mk @@ -1,82 +1,112 @@ -# $Id: options.mk,v 1.13 2020/08/19 17:51:53 sjg Exp $ +# $Id: options.mk,v 1.19 2021/10/03 16:29:51 sjg Exp $ # # @(#) Copyright (c) 2012, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # Inspired by FreeBSD bsd.own.mk, but intentionally simpler and more flexible. # Options are normally listed in either OPTIONS_DEFAULT_{YES,NO} # We convert these to ${OPTION}/{yes,no} in OPTIONS_DEFAULT_VALUES. # We add the OPTIONS_DEFAULT_NO first so they take precedence. # This allows override of an OPTIONS_DEFAULT_YES by adding it to # OPTIONS_DEFAULT_NO or adding ${OPTION}/no to OPTIONS_DEFAULT_VALUES. # An OPTIONS_DEFAULT_NO option can only be overridden by putting # ${OPTION}/yes in OPTIONS_DEFAULT_VALUES. # A makefile may set NO_* (or NO*) to indicate it cannot do something. # User sets WITH_* and WITHOUT_* to indicate what they want. # We set ${OPTION_PREFIX:UMK_}* which is then all we need care about. OPTIONS_DEFAULT_VALUES += \ - ${OPTIONS_DEFAULT_NO:O:u:S,$,/no,} \ - ${OPTIONS_DEFAULT_YES:O:u:S,$,/yes,} + ${OPTIONS_DEFAULT_NO:U:O:u:S,$,/no,} \ + ${OPTIONS_DEFAULT_YES:U:O:u:S,$,/yes,} OPTION_PREFIX ?= MK_ # NO_* takes precedence # If both WITH_* and WITHOUT_* are defined, WITHOUT_ wins unless # DOMINANT_* is set to "yes" # Otherwise WITH_* and WITHOUT_* override the default. .for o in ${OPTIONS_DEFAULT_VALUES:M*/*} +.if defined(WITH_${o:H}) && ${WITH_${o:H}} == "no" +# a common miss-use - point out correct usage +.warning use WITHOUT_${o:H}=1 not WITH_${o:H}=no +.endif .if defined(NO_${o:H}) || defined(NO${o:H}) # we cannot do it ${OPTION_PREFIX}${o:H} ?= no .elif defined(WITH_${o:H}) && defined(WITHOUT_${o:H}) # normally WITHOUT_ wins DOMINANT_${o:H} ?= no ${OPTION_PREFIX}${o:H} ?= ${DOMINANT_${o:H}} .elif ${o:T:tl} == "no" .if defined(WITH_${o:H}) ${OPTION_PREFIX}${o:H} ?= yes .else ${OPTION_PREFIX}${o:H} ?= no .endif .else .if defined(WITHOUT_${o:H}) ${OPTION_PREFIX}${o:H} ?= no .else ${OPTION_PREFIX}${o:H} ?= yes .endif .endif .endfor # OPTIONS_DEFAULT_DEPENDENT += FOO_UTILS/FOO # If neither WITH[OUT]_FOO_UTILS is set, (see rules above) # use the value of ${OPTION_PREFIX}FOO .for o in ${OPTIONS_DEFAULT_DEPENDENT:M*/*:O:u} .if defined(NO_${o:H}) || defined(NO${o:H}) # we cannot do it ${OPTION_PREFIX}${o:H} ?= no .elif defined(WITH_${o:H}) && defined(WITHOUT_${o:H}) # normally WITHOUT_ wins DOMINANT_${o:H} ?= no ${OPTION_PREFIX}${o:H} ?= ${DOMINANT_${o:H}} .elif defined(WITH_${o:H}) ${OPTION_PREFIX}${o:H} ?= yes .elif defined(WITHOUT_${o:H}) ${OPTION_PREFIX}${o:H} ?= no .else ${OPTION_PREFIX}${o:H} ?= ${${OPTION_PREFIX}${o:T}} .endif .endfor -.undef OPTIONS_DEFAULT_VALUES + +# allow displaying/describing set options +.set_options := ${.set_options} \ + ${OPTIONS_DEFAULT_VALUES:H:N.} \ + ${OPTIONS_DEFAULT_DEPENDENT:U:H:N.} \ + +# this can be used in .info as well as target below +OPTIONS_SHOW ?= ${.set_options:O:u:@o@${OPTION_PREFIX}$o=${${OPTION_PREFIX}$o}@} +# prefix for variables describing options +OPTION_DESCRIPTION_PREFIX ?= DESCRIPTION_ +OPTION_DESCRIPTION_SEPARATOR ?= == + +OPTIONS_DESCRIBE ?= ${.set_options:O:u:@o@${OPTION_PREFIX}$o=${${OPTION_PREFIX}$o}${${OPTION_DESCRIPTION_PREFIX}$o:S,^, ${OPTION_DESCRIPTION_SEPARATOR} ,1}${.newline}@} + +.if !commands(show-options) +show-options: .NOTMAIN .PHONY + @echo; echo "${OPTIONS_SHOW:ts\n}"; echo +.endif + +.if !commands(describe-options) +describe-options: .NOTMAIN .PHONY + @echo; echo "${OPTIONS_DESCRIBE}"; echo +.endif + +# we expect to be included more than once +.undef OPTIONS_DEFAULT_DEPENDENT .undef OPTIONS_DEFAULT_NO +.undef OPTIONS_DEFAULT_VALUES .undef OPTIONS_DEFAULT_YES diff --git a/contrib/bmake/mk/own.mk b/contrib/bmake/mk/own.mk index 63322297420b..7b0d74caba8a 100644 --- a/contrib/bmake/mk/own.mk +++ b/contrib/bmake/mk/own.mk @@ -1,271 +1,273 @@ -# $Id: own.mk,v 1.42 2020/11/27 18:00:08 sjg Exp $ +# $Id: own.mk,v 1.44 2021/12/08 05:56:50 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .if !target(__init.mk__) .include "init.mk" .endif .if !defined(NOMAKECONF) && !defined(NO_MAKECONF) MAKECONF?= /etc/mk.conf .-include "${MAKECONF}" .endif .include TARGET_OSNAME?= ${_HOST_OSNAME} TARGET_OSREL?= ${_HOST_OSREL} TARGET_OSTYPE?= ${HOST_OSTYPE} TARGET_HOST?= ${HOST_TARGET} # these may or may not exist .-include <${TARGET_HOST}.mk> .-include RM?= rm LN?= ln INSTALL?= install prefix?= /usr .if exists(${prefix}/lib) libprefix?= ${prefix} .else libprefix?= /usr .endif # FreeBSD at least does not set this MACHINE_ARCH?= ${MACHINE} # we need to make sure these are defined too in case sys.mk fails to. COMPILE.s?= ${CC} ${AFLAGS} -c LINK.s?= ${CC} ${AFLAGS} ${LDFLAGS} COMPILE.S?= ${CC} ${AFLAGS} ${CPPFLAGS} -c -traditional-cpp LINK.S?= ${CC} ${AFLAGS} ${CPPFLAGS} ${LDFLAGS} COMPILE.c?= ${CC} ${CFLAGS} ${CPPFLAGS} -c LINK.c?= ${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} CXXFLAGS?= ${CFLAGS} COMPILE.cc?= ${CXX} ${CXXFLAGS} ${CPPFLAGS} -c LINK.cc?= ${CXX} ${CXXFLAGS} ${CPPFLAGS} ${LDFLAGS} COMPILE.m?= ${OBJC} ${OBJCFLAGS} ${CPPFLAGS} -c LINK.m?= ${OBJC} ${OBJCFLAGS} ${CPPFLAGS} ${LDFLAGS} COMPILE.f?= ${FC} ${FFLAGS} -c LINK.f?= ${FC} ${FFLAGS} ${LDFLAGS} COMPILE.F?= ${FC} ${FFLAGS} ${CPPFLAGS} -c LINK.F?= ${FC} ${FFLAGS} ${CPPFLAGS} ${LDFLAGS} COMPILE.r?= ${FC} ${FFLAGS} ${RFLAGS} -c LINK.r?= ${FC} ${FFLAGS} ${RFLAGS} ${LDFLAGS} LEX.l?= ${LEX} ${LFLAGS} COMPILE.p?= ${PC} ${PFLAGS} ${CPPFLAGS} -c LINK.p?= ${PC} ${PFLAGS} ${CPPFLAGS} ${LDFLAGS} YACC.y?= ${YACC} ${YFLAGS} # for suffix rules IMPFLAGS?= ${COPTS.${.IMPSRC:T}} ${CPUFLAGS.${.IMPSRC:T}} ${CPPFLAGS.${.IMPSRC:T}} .for s in .c .cc COMPILE.$s += ${IMPFLAGS} LINK.$s += ${IMPFLAGS} .endfor PRINT.VAR.MAKE = MAKESYSPATH=${MAKESYSPATH:U${.PARSEDIR}} ${.MAKE} .if empty(.MAKEFLAGS:M-V*) .if defined(MAKEOBJDIRPREFIX) || defined(MAKEOBJDIR) PRINTOBJDIR= ${PRINT.VAR.MAKE} -r -V .OBJDIR -f /dev/null xxx .else PRINTOBJDIR= ${PRINT.VAR.MAKE} -V .OBJDIR .endif .else PRINTOBJDIR= echo # prevent infinite recursion .endif # we really like to have SRCTOP and OBJTOP defined... .if !defined(SRCTOP) || !defined(OBJTOP) .-include .endif .if !defined(SRCTOP) || !defined(OBJTOP) # dpadd.mk is rather pointless without these OPTIONS_DEFAULT_NO+= DPADD_MK .endif # process options OPTIONS_DEFAULT_NO+= \ INSTALL_AS_USER \ GPROF \ PROG_LDORDER_MK \ LIBTOOL \ LINT \ OPTIONS_DEFAULT_YES+= \ ARCHIVE \ AUTODEP \ CRYPTO \ DOC \ DPADD_MK \ GDB \ KERBEROS \ LINKLIB \ MAN \ NLS \ OBJ \ PIC \ SHARE \ SKEY \ YP \ OPTIONS_DEFAULT_DEPENDENT+= \ CATPAGES/MAN \ LDORDER_MK/PROG_LDORDER_MK \ OBJDIRS/OBJ \ PICINSTALL/LINKLIB \ PICLIB/PIC \ PROFILE/LINKLIB \ STAGING_PROG/STAGING \ .include .if ${MK_INSTALL_AS_USER} == "yes" # We ignore this if user is root. _uid:= ${.MAKE.UID:U${id -u:L:sh}} .if ${_uid} != 0 .if !defined(USERGRP) USERGRP:= ${.MAKE.GID:U${id -g:L:sh}} .export USERGRP .endif .for x in BIN CONF DOC INC INFO FILES KMOD LIB MAN NLS PROG SHARE $xOWN= ${USER} $xGRP= ${USERGRP} $x_INSTALL_OWN= .endfor .endif .endif # override this in sys.mk ROOT_GROUP?= wheel BINGRP?= ${ROOT_GROUP} BINOWN?= root BINMODE?= 555 NONBINMODE?= 444 DIRMODE?= 755 INCLUDEDIR?= ${prefix}/include INCDIR?= ${INCLUDEDIR} # Define MANZ to have the man pages compressed (gzip) #MANZ= 1 MANTARGET?= cat MANDIR?= ${prefix}/share/man/${MANTARGET} MANGRP?= ${BINGRP} MANOWN?= ${BINOWN} MANMODE?= ${NONBINMODE} INCLUDEDIR?= ${libprefix}/include LIBDIR?= ${libprefix}/lib SHLIBDIR?= ${libprefix}/lib .if ${USE_SHLIBDIR:Uno} == "yes" _LIBSODIR?= ${SHLIBDIR} .else _LIBSODIR?= ${LIBDIR} .endif # this is where ld.*so lives SHLINKDIR?= /usr/libexec LINTLIBDIR?= ${libprefix}/libdata/lint LIBGRP?= ${BINGRP} LIBOWN?= ${BINOWN} LIBMODE?= ${NONBINMODE} DOCDIR?= ${prefix}/share/doc DOCGRP?= ${BINGRP} DOCOWN?= ${BINOWN} DOCMODE?= ${NONBINMODE} NLSDIR?= ${prefix}/share/nls NLSGRP?= ${BINGRP} NLSOWN?= ${BINOWN} NLSMODE?= ${NONBINMODE} KMODDIR?= ${prefix}/lkm KMODGRP?= ${BINGRP} KMODOWN?= ${BINOWN} KMODMODE?= ${NONBINMODE} SHAREGRP?= ${BINGRP} SHAREOWN?= ${BINOWN} SHAREMODE?= ${NONBINMODE} COPY?= -c STRIP_FLAG?= -s .if ${TARGET_OSNAME} == "NetBSD" .if exists(/usr/libexec/ld.elf_so) OBJECT_FMT=ELF .endif OBJECT_FMT?=a.out .endif # sys.mk should set something appropriate if need be. OBJECT_FMT?=ELF .if (${_HOST_OSNAME} == "FreeBSD") CFLAGS+= ${CPPFLAGS} .endif # allow for per target flags # apply the :T:R first, so the more specific :T can override if needed CPPFLAGS += ${CPPFLAGS_${.TARGET:T:R}} ${CPPFLAGS_${.TARGET:T}} CFLAGS += ${CFLAGS_${.TARGET:T:R}} ${CFLAGS_${.TARGET:T}} # Define SYS_INCLUDE to indicate whether you want symbolic links to the system # source (``symlinks''), or a separate copy (``copies''); (latter useful # in environments where it's not possible to keep /sys publicly readable) #SYS_INCLUDE= symlinks # don't try to generate PIC versions of libraries on machines # which don't support PIC. .if (${MACHINE_ARCH} == "vax") || \ ((${MACHINE_ARCH} == "mips") && defined(STATIC_TOOLCHAIN)) || \ ((${MACHINE_ARCH} == "alpha") && defined(ECOFF_TOOLCHAIN)) MK_PIC=no .endif # No lint, for now. NOLINT= .if ${MK_LINKLIB} == "no" MK_PICINSTALL= no MK_PROFILE= no .endif .if ${MK_MAN} == "no" MK_CATPAGES= no .endif .if ${MK_OBJ} == "no" MK_OBJDIRS= no MK_AUTO_OBJ= no .endif .if ${MK_SHARE} == "no" MK_CATPAGES= no MK_DOC= no MK_INFO= no MK_MAN= no MK_NLS= no .endif # :U incase not using our sys.mk .if ${MK_META_MODE:Uno} == "yes" # should all be set by sys.mk if not default TARGET_SPEC_VARS ?= MACHINE +.if ${MAKE_VERSION} >= 20120325 .if ${TARGET_SPEC_VARS:[#]} > 1 TARGET_SPEC_VARS_REV := ${TARGET_SPEC_VARS:[-1..1]} .else TARGET_SPEC_VARS_REV = ${TARGET_SPEC_VARS} .endif +.endif .if ${MK_STAGING} == "yes" STAGE_ROOT?= ${OBJROOT}/stage STAGE_OBJTOP?= ${STAGE_ROOT}/${TARGET_SPEC_VARS_REV:ts/} .endif .endif .endif diff --git a/contrib/bmake/mk/prlist.mk b/contrib/bmake/mk/prlist.mk index aca1fde25555..3308a9522c89 100644 --- a/contrib/bmake/mk/prlist.mk +++ b/contrib/bmake/mk/prlist.mk @@ -1,36 +1,36 @@ -# $Id: prlist.mk,v 1.4 2020/08/19 17:51:53 sjg Exp $ +# $Id: prlist.mk,v 1.5 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2006, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN # this needs to be included after all the lists it will process # are defined - which is why it is a separate file. # Usage looks like: # MAKEFLAGS= ${.MAKE} -f ${MAKEFILE} prlist.SOMETHING_HUGE | xargs whatever # .if make(prlist.*) .for t in ${.TARGETS:Mprlist.*:E} .if empty($t) prlist.$t: .else prlist.$t: ${$t:O:u:S,^,prlist-,} ${$t:O:u:S,^,prlist-,}: .PHONY @echo "${.TARGET:S,prlist-,,}" .endif .endfor .endif .endif diff --git a/contrib/bmake/mk/prog.mk b/contrib/bmake/mk/prog.mk index ea48837d5544..902b221f7fe5 100644 --- a/contrib/bmake/mk/prog.mk +++ b/contrib/bmake/mk/prog.mk @@ -1,251 +1,251 @@ -# $Id: prog.mk,v 1.36 2020/08/19 17:51:53 sjg Exp $ +# $Id: prog.mk,v 1.37 2021/12/08 05:56:50 sjg Exp $ .if !target(__${.PARSEFILE}__) -__${.PARSEFILE}__: +__${.PARSEFILE}__: .NOTMAIN .include # FreeBSD at least expects MAN8 etc. .if defined(MAN) && !empty(MAN) _sect:=${MAN:E} MAN${_sect}=${MAN} .endif .SUFFIXES: .out .o .c .cc .C .y .l .s .8 .7 .6 .5 .4 .3 .2 .1 .0 CFLAGS+= ${COPTS} .if ${TARGET_OSNAME} == "NetBSD" .if ${MACHINE_ARCH} == "sparc64" CFLAGS+= -mcmodel=medlow .endif # ELF platforms depend on crtbegin.o and crtend.o .if ${OBJECT_FMT} == "ELF" .ifndef LIBCRTBEGIN LIBCRTBEGIN= ${DESTDIR}/usr/lib/crtbegin.o .MADE: ${LIBCRTBEGIN} .endif .ifndef LIBCRTEND LIBCRTEND= ${DESTDIR}/usr/lib/crtend.o .MADE: ${LIBCRTEND} .endif _SHLINKER= ${SHLINKDIR}/ld.elf_so .else LIBCRTBEGIN?= LIBCRTEND?= _SHLINKER= ${SHLINKDIR}/ld.so .endif .ifndef LIBCRT0 LIBCRT0= ${DESTDIR}/usr/lib/crt0.o .MADE: ${LIBCRT0} .endif .endif # NetBSD # here is where you can define what LIB* are .-include .if ${MK_DPADD_MK} == "yes" # lots of cool magic, but might not suit everyone. .include .endif .if ${MK_GPROF} == "yes" CFLAGS+= ${CC_PG} ${PROFFLAGS} LDADD+= ${CC_PG} .if ${MK_DPADD_MK} == "no" LDADD_LIBC_P?= -lc_p LDADD_LAST+= ${LDADD_LIBC_P} .endif .endif .if defined(SHAREDSTRINGS) CLEANFILES+=strings .c.o: ${CC} -E ${CFLAGS} ${.IMPSRC} | xstr -c - @${CC} ${CFLAGS} -c x.c -o ${.TARGET} @rm -f x.c ${CXX_SUFFIXES:%=%.o}: ${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c - @mv -f x.c x.cc @${CXX} ${CXXFLAGS} -c x.cc -o ${.TARGET} @rm -f x.cc .endif .if defined(PROG) BINDIR ?= ${prefix}/bin SRCS?= ${PROG}.c .for s in ${SRCS:N*.h:N*.sh:M*/*} ${.o .po .lo:L:@o@${s:T:R}$o@}: $s .endfor .if !empty(SRCS:N*.h:N*.sh) OBJS+= ${SRCS:T:N*.h:N*.sh:R:S/$/.o/g} LOBJS+= ${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln} .endif .if defined(OBJS) && !empty(OBJS) .NOPATH: ${OBJS} ${PROG} ${SRCS:M*.[ly]:C/\..$/.c/} ${YHEADER:D${SRCS:M*.y:.y=.h}} # this is known to work for NetBSD 1.6 and FreeBSD 4.2 .if ${TARGET_OSNAME} == "NetBSD" || ${TARGET_OSNAME} == "FreeBSD" _PROGLDOPTS= .if ${SHLINKDIR} != "/usr/libexec" # XXX: change or remove if ld.so moves _PROGLDOPTS+= -Wl,-dynamic-linker=${_SHLINKER} .endif .if defined(LIBDIR) && ${SHLIBDIR} != ${LIBDIR} _PROGLDOPTS+= -Wl,-rpath-link,${DESTDIR}${SHLIBDIR}:${DESTDIR}/usr/lib \ -L${DESTDIR}${SHLIBDIR} .endif _PROGLDOPTS+= -Wl,-rpath,${SHLIBDIR}:/usr/lib .if defined(PROG_CXX) _CCLINK= ${CXX} _SUPCXX= -lstdc++ -lm .endif .endif # NetBSD _CCLINK?= ${CC} .if ${MK_PROG_LDORDER_MK} != "no" ${PROG}: ldorder .include .endif .if defined(DESTDIR) && exists(${LIBCRT0}) && ${LIBCRT0} != "/dev/null" ${PROG}: ${LIBCRT0} ${OBJS} ${LIBC} ${DPADD} ${_CCLINK} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} -nostdlib ${_PROGLDOPTS} -L${DESTDIR}/usr/lib ${LIBCRT0} ${LIBCRTBEGIN} ${OBJS} ${LDADD_LDORDER} ${LDADD} -L${DESTDIR}/usr/lib ${_SUPCXX} -lgcc -lc -lgcc ${LIBCRTEND} .else ${PROG}: ${LIBCRT0} ${OBJS} ${LIBC} ${DPADD} ${_CCLINK} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} ${_PROGLDOPTS} ${OBJS} ${LDADD_LDORDER} ${LDADD} .endif # defined(DESTDIR) .endif # defined(OBJS) && !empty(OBJS) .if !defined(MAN) MAN= ${PROG}.1 .endif # !defined(MAN) .endif # defined(PROG) .if !defined(_SKIP_BUILD) realbuild: ${PROG} .endif all: _SUBDIRUSE .if !target(clean) cleanprog: rm -f a.out [Ee]rrs mklog core *.core \ ${PROG} ${OBJS} ${LOBJS} ${CLEANFILES} clean: _SUBDIRUSE cleanprog cleandir: _SUBDIRUSE cleanprog .else cleandir: _SUBDIRUSE clean .endif .if defined(SRCS) && (!defined(MKDEP) || ${MKDEP} != autodep) afterdepend: .depend @(TMP=/tmp/_depend$$$$; \ sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.ln:/' \ < .depend > $$TMP; \ mv $$TMP .depend) .endif .if !target(install) .if !target(beforeinstall) beforeinstall: .endif .if !target(afterinstall) afterinstall: .endif .if !empty(BINOWN) PROG_INSTALL_OWN ?= -o ${BINOWN} -g ${BINGRP} .endif .if !target(realinstall) realinstall: proginstall .endif .if !target(proginstall) proginstall: .if defined(PROG) [ -d ${DESTDIR}${BINDIR} ] || \ ${INSTALL} -d ${PROG_INSTALL_OWN} -m 775 ${DESTDIR}${BINDIR} ${INSTALL} ${COPY} ${STRIP_FLAG} ${PROG_INSTALL_OWN} -m ${BINMODE} \ ${PROG} ${DESTDIR}${BINDIR}/${PROG_NAME} .endif .if defined(HIDEGAME) (cd ${DESTDIR}/usr/games; rm -f ${PROG}; ln -s dm ${PROG}) .endif .endif .include install: maninstall install_links _SUBDIRUSE install_links: .if !empty(SYMLINKS) @set ${SYMLINKS}; ${_SYMLINKS_SCRIPT} .endif .if !empty(LINKS) @set ${LINKS}; ${_LINKS_SCRIPT} .endif maninstall: afterinstall afterinstall: realinstall install_links: realinstall proginstall: beforeinstall realinstall: beforeinstall .endif .if !target(lint) lint: ${LOBJS} .if defined(LOBJS) && !empty(LOBJS) @${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD} .endif .endif .NOPATH: ${PROG} .if defined(OBJS) && !empty(OBJS) .NOPATH: ${OBJS} .endif .if defined(FILES) || defined(FILESGROUPS) .include .endif .if ${MK_MAN} != "no" .include .endif .if ${MK_NLS} != "no" .include .endif .include .include .include .if !empty(PROG) && ${MK_STAGING_PROG} == "yes" STAGE_BINDIR ?= ${STAGE_OBJTOP}${BINDIR} STAGE_DIR.prog ?= ${STAGE_BINDIR} .if ${PROG_NAME:U${PROG}} != ${PROG} STAGE_AS_SETS += prog STAGE_AS_${PROG} = ${PROG_NAME} stage_as.prog: ${PROG} .else STAGE_SETS += prog stage_files.prog: ${PROG} .endif .endif .include .endif diff --git a/contrib/bmake/mk/stage-install.sh b/contrib/bmake/mk/stage-install.sh index 674652d1d482..97d50871f95c 100755 --- a/contrib/bmake/mk/stage-install.sh +++ b/contrib/bmake/mk/stage-install.sh @@ -1,135 +1,139 @@ #!/bin/sh # NAME: # stage-install.sh - wrapper around install # # SYNOPSIS: # stage-install.sh [variable="value"] "args" "dest" # # DESCRIPTION: # This script is a wrapper around the normal install(1). # Its role is to add '.dirdep' files to the destination. # The variables we might use are: # # INSTALL # Path to actual install(1), default is # $REAL_INSTALL # # OBJDIR # Path to the dir where '.dirdep' was generated, # default is '.' # # _DIRDEP # Path to actual '.dirdep' file, default is # $OBJDIR/.dirdep # # The "args" and "dest" are passed as is to install(1), and if a # '.dirdep' file exists it will be linked or copied to each # "file".dirdep placed in "dest" or "dest".dirdep if it happed # to be a file rather than a directory. # # Before we run install(1), we check if "dest" needs to be a # directory (more than one file in "args") and create it # if necessary. # # SEE ALSO: # meta.stage.mk # # RCSid: -# $Id: stage-install.sh,v 1.9 2020/08/28 01:04:13 sjg Exp $ +# $Id: stage-install.sh,v 1.10 2021/11/17 07:06:31 sjg Exp $ # # @(#) Copyright (c) 2013-2020, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # INSTALL=${REAL_INSTALL:-install} OBJDIR=. while : do case "$1" in *=*) eval "$1"; shift;; *) break;; esac done # get last entry from "$@" without side effects last_entry() { while [ $# -gt 8 ] do shift 8 done eval last=\$$# echo $last } # mkdir $dest if needed (more than one file) mkdir_if_needed() { ( lf= while [ $# -gt 8 ] do shift 4 done for f in "$@" do [ -f $f ] || continue [ $f = $dest ] && continue if [ -n "$lf" ]; then # dest must be a directory mkdir -p $dest break fi lf=$f done ) } args="$@" dest=`last_entry "$@"` case " $args " in *" -d "*) ;; *) [ -e $dest ] || mkdir_if_needed "$@";; esac # if .dirdep doesn't exist, just run install and be done _DIRDEP=${_DIRDEP:-$OBJDIR/.dirdep} [ -s $_DIRDEP ] && EXEC= || EXEC=exec $EXEC $INSTALL "$@" || exit 1 # from meta.stage.mk LnCp() { rm -f $2 2> /dev/null ln $1 $2 2> /dev/null || cp -p $1 $2 } StageDirdep() { t=$1 if [ -s $t.dirdep ]; then cmp -s $_DIRDEP $t.dirdep && return - echo "ERROR: $t installed by `cat $t.dirdep` not `cat $_DIRDEP`" >&2 - exit 1 + case "${STAGE_CONFLICT:-error}" in + [Ee]*) STAGE_CONFLICT=ERROR action=exit;; + *) STAGE_CONFLICT=WARNING action=: ;; + esac + echo "$STAGE_CONFLICT: $t installed by `cat $t.dirdep` not `cat $_DIRDEP`" >&2 + $action 1 fi LnCp $_DIRDEP $t.dirdep || exit 1 } if [ -f $dest ]; then # a file, there can be only one .dirdep needed StageDirdep $dest elif [ -d $dest ]; then for f in $args do test -f $f || continue StageDirdep $dest/${f##*/} done fi diff --git a/contrib/bmake/mk/sys.mk b/contrib/bmake/mk/sys.mk index 7ef8f724ef10..e39d5ac74548 100644 --- a/contrib/bmake/mk/sys.mk +++ b/contrib/bmake/mk/sys.mk @@ -1,156 +1,155 @@ -# $Id: sys.mk,v 1.52 2020/12/22 20:44:24 sjg Exp $ +# $Id: sys.mk,v 1.53 2021/12/13 05:50:13 sjg Exp $ # # @(#) Copyright (c) 2003-2009, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # Avoid putting anything platform specific in here. # _DEBUG_MAKE_FLAGS etc. .include .if !empty(_DEBUG_MAKE_FLAGS) .if ${_DEBUG_MAKE_SYS_DIRS:Uno:@x@${.CURDIR:M$x}@} != "" .MAKEFLAGS: ${_DEBUG_MAKE_FLAGS} .endif .endif # useful modifiers .include # we expect a recent bmake .if !defined(_TARGETS) # some things we do only once _TARGETS := ${.TARGETS} .-include .endif # we need HOST_TARGET etc below. .include # early customizations .-include # Popular suffixes for C++ CXX_SUFFIXES += .cc .cpp .cxx .C CXX_SUFFIXES := ${CXX_SUFFIXES:O:u} # find the OS specifics .if defined(SYS_OS_MK) .include <${SYS_OS_MK}> .else _sys_mk = .for x in ${HOST_OSTYPE} ${HOST_TARGET} ${HOST_OS} ${MACHINE} Generic .if empty(_sys_mk) .-include _sys_mk := ${.MAKE.MAKEFILES:M*/$x.mk} .if !empty(_sys_mk) _sys_mk := sys/${_sys_mk:T} .endif .endif .if empty(_sys_mk) # might be an old style .-include <$x.sys.mk> _sys_mk := ${.MAKE.MAKEFILES:M*/$x.sys.mk:T} .endif .endfor SYS_OS_MK := ${_sys_mk} .export SYS_OS_MK .endif # some options we need to know early OPTIONS_DEFAULT_NO += \ DIRDEPS_BUILD \ DIRDEPS_CACHE OPTIONS_DEFAULT_DEPENDENT += \ AUTO_OBJ/DIRDEPS_BUILD \ META_MODE/DIRDEPS_BUILD \ STAGING/DIRDEPS_BUILD \ STATIC_DIRDEPS_CACHE/DIRDEPS_CACHE \ .-include -.if ${MK_DIRDEPS_BUILD:Uno} == "yes" -MK_META_MODE = yes +# :Uno incase options.mk not installed +.if ${MK_META_MODE:Uno} == "yes" .-include -.elif ${MK_META_MODE:Uno} == "yes" -.MAKE.MODE = meta verbose ${META_MODE} +.MAKE.MODE ?= meta verbose {META_MODE} .endif # make sure we have a harmless value .MAKE.MODE ?= normal # if you want objdirs make them automatic # and do it early before we compute .PATH .if ${MK_AUTO_OBJ:Uno} == "yes" || ${MKOBJDIRS:Uno} == "auto" .include .endif .if !empty(SRCTOP) .if ${.CURDIR} == ${SRCTOP} RELDIR = . .elif ${.CURDIR:M${SRCTOP}/*} RELDIR := ${.CURDIR:S,${SRCTOP}/,,} .endif .endif MACHINE_ARCH.host ?= ${_HOST_ARCH} MACHINE_ARCH.${MACHINE} ?= ${MACHINE} .if empty(MACHINE_ARCH) MACHINE_ARCH = ${MACHINE_ARCH.${MACHINE}} .endif .ifndef ROOT_GROUP ROOT_GROUP != sed -n /:0:/s/:.*//p /etc/group .export ROOT_GROUP .endif unix ?= We run ${_HOST_OSNAME}. # We need a Bourne/POSIX shell MAKE_SHELL ?= ${.SHELL:Ush} SHELL := ${MAKE_SHELL} # A race condition in mkdir, means that it can bail if another # process made a dir that mkdir expected to. # We repeat the mkdir -p a number of times to try and work around this. # We stop looping as soon as the dir exists. # If we get to the end of the loop, a plain mkdir will issue an error. Mkdirs= Mkdirs() { \ for d in $$*; do \ for i in 1 2 3 4 5 6; do \ mkdir -p $$d; \ test -d $$d && return 0; \ done; \ mkdir $$d || exit $$?; \ done; } # this often helps with debugging .SUFFIXES: .cpp-out .c.cpp-out: @${COMPILE.c:N-c} -E ${.IMPSRC} | grep -v '^[ ]*$$' ${CXX_SUFFIXES:%=%.cpp-out}: @${COMPILE.cc:N-c} -E ${.IMPSRC} | grep -v '^[ ]*$$' # late customizations .-include # if .CURDIR is matched by any entry in DEBUG_MAKE_DIRS we # will apply DEBUG_MAKE_FLAGS, now. .if !empty(_DEBUG_MAKE_FLAGS) .if ${_DEBUG_MAKE_DIRS:Uno:@x@${.CURDIR:M$x}@} != "" .MAKEFLAGS: ${_DEBUG_MAKE_FLAGS} .endif .endif diff --git a/contrib/bmake/mk/sys.vars.mk b/contrib/bmake/mk/sys.vars.mk index 592cbdc644dc..391967b18a2b 100644 --- a/contrib/bmake/mk/sys.vars.mk +++ b/contrib/bmake/mk/sys.vars.mk @@ -1,99 +1,99 @@ -# $Id: sys.vars.mk,v 1.6 2020/10/28 20:50:04 sjg Exp $ +# $Id: sys.vars.mk,v 1.7 2021/12/08 05:56:50 sjg Exp $ # # @(#) Copyright (c) 2003-2009, Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # We use the following paradigm for preventing multiple inclusion. # It relies on the fact that conditionals and dependencies are resolved # at the time they are read. # # _this ?= ${.PARSEFILE} # .if !target(__${_this}__) -# __${_this}__: +# __${_this}__: .NOTMAIN # .if ${MAKE_VERSION:U0} > 20100408 _this = ${.PARSEDIR:tA}/${.PARSEFILE} .else _this = ${.PARSEDIR}/${.PARSEFILE} .endif # if this is an ancient version of bmake MAKE_VERSION ?= 0 .if ${MAKE_VERSION:M*make-*} # turn it into what we want - just the date MAKE_VERSION := ${MAKE_VERSION:[1]:C,.*-,,} .endif # some useful modifiers # A useful trick for testing multiple :M's against something # :L says to use the variable's name as its value - ie. literal # got = ${clean* destroy:${M_ListToMatch:S,V,.TARGETS,}} M_ListToMatch = L:@m@$${V:M$$m}@ # match against our initial targets (see above) M_L_TARGETS = ${M_ListToMatch:S,V,_TARGETS,} # turn a list into a set of :N modifiers # NskipFoo = ${Foo:${M_ListToSkip}} M_ListToSkip= O:u:S,^,N,:ts: # type should be a builtin in any sh since about 1980, # but sadly there are exceptions! .if ${.MAKE.OS:Unknown:NBSD/OS} == "" _type_sh = which .endif # AUTOCONF := ${autoconf:L:${M_whence}} M_type = @x@(${_type_sh:Utype} $$x) 2> /dev/null; echo;@:sh:[0]:N* found*:[@]:C,[()],,g M_whence = ${M_type}:M/*:[1] # produce similar output to jot(1) # eg. ${LIST:[#]:${M_JOT}} # would be 1 2 3 4 5 if LIST has 5 words # ${9:L:${M_JOT}} # would be 1 2 3 4 5 6 7 8 9 M_JOT = @x@i=1;while [ $$$$i -le $$x ]; do echo $$$$i; i=$$$$((i + 1)); done;@:sh # ${LIST:${M_RANGE}} is 1 2 3 4 5 if LIST has 5 words .if ${MAKE_VERSION} >= 20170130 M_RANGE = range .else M_RANGE = [#]:${M_JOT} .endif # convert a path to a valid shell variable M_P2V = tu:C,[./-],_,g # convert path to absolute .if ${MAKE_VERSION:U0} > 20100408 M_tA = tA .else M_tA = C,.*,('cd' & \&\& 'pwd') 2> /dev/null || echo &,:sh .endif .if ${MAKE_VERSION:U0} >= 20170130 # M_cmpv allows comparing dotted versions like 3.1.2 # ${3.1.2:L:${M_cmpv}} -> 3001002 # we use big jumps to handle 3 digits per dot: # ${123.456.789:L:${M_cmpv}} -> 123456789 M_cmpv.units = 1 1000 1000000 M_cmpv = S,., ,g:_:range:@i@+ $${_:[-$$i]} \* $${M_cmpv.units:[$$i]}@:S,^,expr 0 ,1:sh .endif # absoulte path to what we are reading. _PARSEDIR = ${.PARSEDIR:${M_tA}} # many projects use MAJOR MINOR PATCH versioning # ${OPENSSL:${M_M.M.P_VERSION}} is equivalent to # ${OPENSSL_MAJOR_VERSION}.${OPENSSL_MINOR_VERSION}.${OPENSSL_PATCH_VERSION} M_M.M.P_VERSION = L:@v@$${MAJOR MINOR PATCH:L:@t@$${$$v_$$t_VERSION:U0}@}@:ts. diff --git a/contrib/bmake/mk/sys/SCO_SV.mk b/contrib/bmake/mk/sys/SCO_SV.mk new file mode 100644 index 000000000000..9bf4b7c587c5 --- /dev/null +++ b/contrib/bmake/mk/sys/SCO_SV.mk @@ -0,0 +1,13 @@ +# $Id: SCO_SV.mk,v 1.1 2021/10/13 16:45:52 sjg Exp $ + +OS = SCO_SV +OS_DEF_FLAG := -D${OS} + +CC ?= gcc +CXX ?= g++ +DEV_TOOLS_PREFIX ?= /usr/xdev +FC ?= gfortran +INSTALL ?= /usr/gnu/bin/install +LD ?= gcc + +.include "UnixWare.mk" diff --git a/contrib/bmake/mk/sys/UnixWare.mk b/contrib/bmake/mk/sys/UnixWare.mk index 272d3e65c2d8..9e0216399ade 100644 --- a/contrib/bmake/mk/sys/UnixWare.mk +++ b/contrib/bmake/mk/sys/UnixWare.mk @@ -1,241 +1,247 @@ -# $Id: UnixWare.mk,v 1.7 2020/08/19 17:51:53 sjg Exp $ +# $Id: UnixWare.mk,v 1.8 2021/10/13 16:45:52 sjg Exp $ # based on "Id: SunOS.5.sys.mk,v 1.6 2003/09/30 16:42:23 sjg Exp " # $NetBSD: sys.mk,v 1.19.2.1 1994/07/26 19:58:31 cgd Exp $ # @(#)sys.mk 5.11 (Berkeley) 3/13/91 OS ?= UnixWare +OS_DEF_FLAG ?= -DUNIXWARE unix ?= We run ${OS}. ROOT_GROUP ?= root +DEV_TOOLS_PREFIX ?= /usr/local -# can't fine one anywhere, so just stop the dependency +# can't find one anywhere, so just stop the dependency LIBCRT0 ?= /dev/null -PATH ?=/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/ccs/lib:/usr/ucb:/usr/local/bin +PATH ?= /usr/sbin:/usr/bin:/usr/ccs/bin:/usr/ccs/lib:/usr/ucb:${DEV_TOOLS_PREFIX}/bin .SUFFIXES: .out .a .ln .o .c ${CXX_SUFFIXES} .F .f .r .y .l .s .S .cl .p .h .sh .m4 .LIBS: .a # no -X LD_X= LD_x= AR ?= ar ARFLAGS ?= rl RANLIB ?= : AS ?= as AS_STDIN ?= - AFLAGS ?= COMPILE.s ?= ${AS} ${AFLAGS} LINK.s ?= ${CC} ${AFLAGS} ${LDFLAGS} COMPILE.S ?= ${CC} ${AFLAGS} ${CPPFLAGS} -c LINK.S ?= ${CC} ${AFLAGS} ${CPPFLAGS} ${LDFLAGS} # at least gcc 2.95 on UnixWare has no internal macro to identify the system -.if exists(/usr/local/bin/gcc) -CC ?= gcc -pipe -DUNIXWARE +.if exists(${DEV_TOOLS_PREFIX}/bin/gcc) +CC ?= gcc -pipe ${OS_DEF_FLAG} DBG ?= -O -g STATIC ?= -static .else CC ?= cc DBG ?= -g STATIC ?= -Bstatic # XXX: don't know about UDK compilers .endif CFLAGS ?= ${DBG} COMPILE.c ?= ${CC} ${CFLAGS} ${CPPFLAGS} -c LINK.c ?= ${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} -.if exists(/usr/local/bin/g++) -CXX ?= g++ -DUNIXWARE +.if exists(${DEV_TOOLS_PREFIX}/bin/g++) +CXX ?= g++ ${OS_DEF_FLAG} .else CXX ?= c++ # XXX: don't know about UDK compilers .endif CXXFLAGS ?= ${CFLAGS} COMPILE.cc ?= ${CXX} ${CXXFLAGS} ${CPPFLAGS} -c LINK.cc ?= ${CXX} ${CXXFLAGS} ${CPPFLAGS} ${LDFLAGS} +.if exists(${DEV_TOOLS_PREFIX}/bin/cpp) +CPP ?= cpp +.else CPP ?= /usr/ccs/lib/cpp +.endif .if defined(DESTDIR) CPPFLAGS+= -nostdinc -idirafter ${DESTDIR}/usr/include .endif MK_DEP ?= mkdeps.sh -N -.if exists(/usr/local/bin/g77) +.if exists(${DEV_TOOLS_PREFIX}/bin/g77) FC ?= g77 .else FC ?= f77 # XXX: don't know about UDK compilers .endif FFLAGS ?= -O RFLAGS ?= COMPILE.f ?= ${FC} ${FFLAGS} -c LINK.f ?= ${FC} ${FFLAGS} ${LDFLAGS} COMPILE.F ?= ${FC} ${FFLAGS} ${CPPFLAGS} -c LINK.F ?= ${FC} ${FFLAGS} ${CPPFLAGS} ${LDFLAGS} COMPILE.r ?= ${FC} ${FFLAGS} ${RFLAGS} -c LINK.r ?= ${FC} ${FFLAGS} ${RFLAGS} ${LDFLAGS} INSTALL ?= /usr/ucb/install # BSD install LEX ?= lex LFLAGS ?= LEX.l ?= ${LEX} ${LFLAGS} LD ?= ld LDFLAGS ?= LIBC ?= ${DESTDIR}/usr/ccs/lib/libc.a LIBCOMPAT ?= LIBCRYPT ?= ${DESTDIR}/usr/lib/libcrypt.a LIBCURSES ?= ${DESTDIR}/usr/ccs/lib/libcurses.a LIBDBM ?= LIBDES ?= LIBEDIT ?= LIBGCC ?= LIBKDB ?= LIBKRB ?= LIBKVM ?= LIBL ?= ${DESTDIR}/usr/ccs/lib/libl.a LIBM ?= ${DESTDIR}/usr/ccs/lib/libm.a LIBMP ?= LIBPC ?= LIBPCAP ?= LIBPLOT ?= LIBRESOLV ?= LIBRPCSVC ?= ${DESTDIR}/usr/lib/librpcsvc.a LIBSKEY ?= ${DESTDIR}/usr/lib/libskey.a LIBTERMCAP ?= ${DESTDIR}/usr/ccs/lib/libtermcap.a LIBUTIL ?= LIBWRAP ?= LIBY ?= ${DESTDIR}/usr/ccs/lib/liby.a LIBZ ?= LINT ?= lint LINTFLAGS ?= -pF LORDER ?= lorder NM ?= nm PC ?= pc # XXX: UDK probably does not have pc PFLAGS ?= COMPILE.p ?= ${PC} ${PFLAGS} ${CPPFLAGS} -c LINK.p ?= ${PC} ${PFLAGS} ${CPPFLAGS} ${LDFLAGS} SIZE ?= size TSORT ?= tsort -.if exists(/usr/local/bin/bison) +.if exists(${DEV_TOOLS_PREFIX}/bin/bison) YACC ?= bison -y .else YACC ?= yacc .endif YFLAGS ?= -d YACC.y ?= ${YACC} ${YFLAGS} # C .c: ${LINK.c} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .c.o: ${COMPILE.c} ${.IMPSRC} .c.a: ${COMPILE.c} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o # C++ ${CXX_SUFFIXES}: ${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} ${CXX_SUFFIXES:%=%.o}: ${COMPILE.cc} ${.IMPSRC} ${CXX_SUFFIXES:%=%.a}: ${COMPILE.cc} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o # Fortran/Ratfor .f: ${LINK.f} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .f.o: ${COMPILE.f} ${.IMPSRC} .f.a: ${COMPILE.f} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o .F: ${LINK.F} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .F.o: ${COMPILE.F} ${.IMPSRC} .F.a: ${COMPILE.F} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o .r: ${LINK.r} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .r.o: ${COMPILE.r} ${.IMPSRC} .r.a: ${COMPILE.r} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o # Pascal .p: ${LINK.p} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .p.o: ${COMPILE.p} ${.IMPSRC} .p.a: ${COMPILE.p} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o # Assembly .s: ${LINK.s} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .s.o: ${COMPILE.s} ${.IMPSRC} .s.a: ${COMPILE.s} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o .S: ${LINK.S} -o ${.TARGET} ${.IMPSRC} ${LDLIBS} .S.o: ${COMPILE.S} ${.IMPSRC} .S.a: ${COMPILE.S} ${.IMPSRC} ${AR} ${ARFLAGS} $@ $*.o rm -f $*.o # Lex .l: ${LEX.l} ${.IMPSRC} ${LINK.c} -o ${.TARGET} lex.yy.c ${LDLIBS} -ll rm -f lex.yy.c .l.c: ${LEX.l} ${.IMPSRC} mv lex.yy.c ${.TARGET} .l.o: ${LEX.l} ${.IMPSRC} ${COMPILE.c} -o ${.TARGET} lex.yy.c rm -f lex.yy.c # Yacc .y: ${YACC.y} ${.IMPSRC} ${LINK.c} -o ${.TARGET} y.tab.c ${LDLIBS} rm -f y.tab.c .y.c: ${YACC.y} ${.IMPSRC} mv y.tab.c ${.TARGET} .y.o: ${YACC.y} ${.IMPSRC} ${COMPILE.c} -o ${.TARGET} y.tab.c rm -f y.tab.c # Shell .sh: rm -f ${.TARGET} cp ${.IMPSRC} ${.TARGET} diff --git a/contrib/bmake/nonints.h b/contrib/bmake/nonints.h index 7119d798432b..8583e50270fd 100644 --- a/contrib/bmake/nonints.h +++ b/contrib/bmake/nonints.h @@ -1,347 +1,348 @@ -/* $NetBSD: nonints.h,v 1.213 2021/04/11 13:35:56 rillig Exp $ */ +/* $NetBSD: nonints.h,v 1.217 2021/12/12 20:45:48 sjg Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)nonints.h 8.3 (Berkeley) 3/19/94 */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)nonints.h 8.3 (Berkeley) 3/19/94 */ /* arch.c */ void Arch_Init(void); void Arch_End(void); bool Arch_ParseArchive(char **, GNodeList *, GNode *); void Arch_Touch(GNode *); void Arch_TouchLib(GNode *); void Arch_UpdateMTime(GNode *gn); void Arch_UpdateMemberMTime(GNode *gn); void Arch_FindLib(GNode *, SearchPath *); bool Arch_LibOODate(GNode *); bool Arch_IsLib(GNode *); /* compat.c */ int Compat_RunCommand(const char *, GNode *, StringListNode *); void Compat_Run(GNodeList *); void Compat_Make(GNode *, GNode *); /* cond.c */ CondEvalResult Cond_EvalCondition(const char *, bool *); CondEvalResult Cond_EvalLine(const char *); void Cond_restore_depth(unsigned int); unsigned int Cond_save_depth(void); /* dir.c; see also dir.h */ MAKE_INLINE const char * str_basename(const char *pathname) { const char *lastSlash = strrchr(pathname, '/'); return lastSlash != NULL ? lastSlash + 1 : pathname; } MAKE_INLINE SearchPath * SearchPath_New(void) { SearchPath *path = bmake_malloc(sizeof *path); Lst_Init(&path->dirs); return path; } void SearchPath_Free(SearchPath *); /* for.c */ int For_Eval(const char *); bool For_Accum(const char *); void For_Run(int); /* job.c */ #ifdef WAIT_T void JobReapChild(pid_t, WAIT_T, bool); #endif /* main.c */ bool GetBooleanExpr(const char *, bool); void Main_ParseArgLine(const char *); char *Cmd_Exec(const char *, const char **); void Error(const char *, ...) MAKE_ATTR_PRINTFLIKE(1, 2); void Fatal(const char *, ...) MAKE_ATTR_PRINTFLIKE(1, 2) MAKE_ATTR_DEAD; void Punt(const char *, ...) MAKE_ATTR_PRINTFLIKE(1, 2) MAKE_ATTR_DEAD; void DieHorribly(void) MAKE_ATTR_DEAD; void Finish(int) MAKE_ATTR_DEAD; int eunlink(const char *); void execDie(const char *, const char *); char *getTmpdir(void); bool ParseBoolean(const char *, bool); char *cached_realpath(const char *, char *); /* parse.c */ void Parse_Init(void); void Parse_End(void); typedef enum VarAssignOp { VAR_NORMAL, /* = */ VAR_SUBST, /* := */ VAR_SHELL, /* != or :sh= */ VAR_APPEND, /* += */ VAR_DEFAULT /* ?= */ } VarAssignOp; typedef struct VarAssign { char *varname; /* unexpanded */ VarAssignOp op; const char *value; /* unexpanded */ } VarAssign; typedef char *(*ReadMoreProc)(void *, size_t *); void Parse_Error(ParseErrorLevel, const char *, ...) MAKE_ATTR_PRINTFLIKE(2, 3); bool Parse_IsVar(const char *, VarAssign *out_var); void Parse_Var(VarAssign *, GNode *); void Parse_AddIncludeDir(const char *); void Parse_File(const char *, int); -void Parse_SetInput(const char *, int, int, ReadMoreProc, void *); +void Parse_PushInput(const char *, int, int, ReadMoreProc, void *); void Parse_MainName(GNodeList *); -int Parse_GetFatals(void); +int Parse_NumErrors(void); #ifndef HAVE_STRLCPY /* strlcpy.c */ size_t strlcpy(char *, const char *, size_t); #endif /* suff.c */ void Suff_Init(void); void Suff_End(void); void Suff_ClearSuffixes(void); bool Suff_IsTransform(const char *); GNode *Suff_AddTransform(const char *); void Suff_EndTransform(GNode *); void Suff_AddSuffix(const char *, GNode **); SearchPath *Suff_GetPath(const char *); void Suff_ExtendPaths(void); void Suff_AddInclude(const char *); void Suff_AddLib(const char *); void Suff_FindDeps(GNode *); SearchPath *Suff_FindPath(GNode *); void Suff_SetNull(const char *); void Suff_PrintAll(void); +const char *Suff_NamesStr(void); /* targ.c */ void Targ_Init(void); void Targ_End(void); void Targ_Stats(void); GNodeList *Targ_List(void); GNode *GNode_New(const char *); GNode *Targ_FindNode(const char *); GNode *Targ_GetNode(const char *); GNode *Targ_NewInternalNode(const char *); GNode *Targ_GetEndNode(void); void Targ_FindList(GNodeList *, StringList *); bool Targ_Precious(const GNode *); void Targ_SetMain(GNode *); void Targ_PrintCmds(GNode *); void Targ_PrintNode(GNode *, int); void Targ_PrintNodes(GNodeList *, int); const char *Targ_FmtTime(time_t); -void Targ_PrintType(int); +void Targ_PrintType(GNodeType); void Targ_PrintGraph(int); void Targ_Propagate(void); const char *GNodeMade_Name(GNodeMade); /* var.c */ void Var_Init(void); void Var_End(void); typedef enum VarEvalMode { /* * Only parse the expression but don't evaluate any part of it. * * TODO: Document what Var_Parse and Var_Subst return in this mode. * As of 2021-03-15, they return unspecified, inconsistent results. */ VARE_PARSE_ONLY, /* Parse and evaluate the expression. */ VARE_WANTRES, /* * Parse and evaluate the expression. It is an error if a * subexpression evaluates to undefined. */ VARE_UNDEFERR, /* * Parse and evaluate the expression. Keep '$$' as '$$' instead of * reducing it to a single '$'. Subexpressions that evaluate to * undefined expand to an empty string. * * Used in variable assignments using the ':=' operator. It allows * multiple such assignments to be chained without accidentally * expanding '$$file' to '$file' in the first assignment and * interpreting it as '${f}' followed by 'ile' in the next assignment. */ VARE_EVAL_KEEP_DOLLAR, /* * Parse and evaluate the expression. Keep undefined variables as-is * instead of expanding them to an empty string. * * Example for a ':=' assignment: * CFLAGS = $(.INCLUDES) * CFLAGS := -I.. $(CFLAGS) * # If .INCLUDES (an undocumented special variable, by the * # way) is still undefined, the updated CFLAGS becomes * # "-I.. $(.INCLUDES)". */ VARE_EVAL_KEEP_UNDEF, /* * Parse and evaluate the expression. Keep '$$' as '$$' and preserve * undefined subexpressions. */ VARE_KEEP_DOLLAR_UNDEF } VarEvalMode; typedef enum VarSetFlags { VAR_SET_NONE = 0, /* do not export */ VAR_SET_NO_EXPORT = 1 << 0, /* Make the variable read-only. No further modification is possible, * except for another call to Var_Set with the same flag. */ VAR_SET_READONLY = 1 << 1 } VarSetFlags; /* The state of error handling returned by Var_Parse. */ typedef enum VarParseResult { /* Both parsing and evaluation succeeded. */ VPR_OK, /* Parsing or evaluating failed, with an error message. */ VPR_ERR, /* * Parsing succeeded, undefined expressions are allowed and the * expression was still undefined after applying all modifiers. * No error message is printed in this case. * * Some callers handle this case differently, so return this * information to them, for now. * * TODO: Instead of having this special return value, rather ensure * that VARE_EVAL_KEEP_UNDEF is processed properly. */ VPR_UNDEF } VarParseResult; typedef enum VarExportMode { /* .export-env */ VEM_ENV, /* .export: Initial export or update an already exported variable. */ VEM_PLAIN, /* .export-literal: Do not expand the variable value. */ VEM_LITERAL } VarExportMode; void Var_Delete(GNode *, const char *); void Var_DeleteExpand(GNode *, const char *); void Var_Undef(const char *); void Var_Set(GNode *, const char *, const char *); void Var_SetExpand(GNode *, const char *, const char *); void Var_SetWithFlags(GNode *, const char *, const char *, VarSetFlags); void Var_SetExpandWithFlags(GNode *, const char *, const char *, VarSetFlags); void Var_Append(GNode *, const char *, const char *); void Var_AppendExpand(GNode *, const char *, const char *); bool Var_Exists(GNode *, const char *); bool Var_ExistsExpand(GNode *, const char *); FStr Var_Value(GNode *, const char *); const char *GNode_ValueDirect(GNode *, const char *); VarParseResult Var_Parse(const char **, GNode *, VarEvalMode, FStr *); VarParseResult Var_Subst(const char *, GNode *, VarEvalMode, char **); void Var_Stats(void); void Var_Dump(GNode *); void Var_ReexportVars(void); void Var_Export(VarExportMode, const char *); void Var_ExportVars(const char *); void Var_UnExport(bool, const char *); void Global_Set(const char *, const char *); void Global_SetExpand(const char *, const char *); void Global_Append(const char *, const char *); void Global_Delete(const char *); /* util.c */ typedef void (*SignalProc)(int); SignalProc bmake_signal(int, SignalProc); diff --git a/contrib/bmake/os.sh b/contrib/bmake/os.sh index 7e6823b240c3..1fc66ecc6a63 100644 --- a/contrib/bmake/os.sh +++ b/contrib/bmake/os.sh @@ -1,258 +1,258 @@ : # NAME: # os.sh - operating system specifics # # DESCRIPTION: # This file is included at the start of processing. Its role is # to set the variables OS, OSREL, OSMAJOR, MACHINE and MACHINE_ARCH to # reflect the current system. # # It also sets variables such as MAILER, LOCAL_FS, PS_AXC to hide # certain aspects of different UNIX flavours. # # SEE ALSO: # site.sh,funcs.sh # # AUTHOR: # Simon J. Gerraty # RCSid: -# $Id: os.sh,v 1.56 2020/08/05 23:25:22 sjg Exp $ +# $Id: os.sh,v 1.59 2021/11/14 04:18:00 sjg Exp $ # # @(#) Copyright (c) 1994 Simon J. Gerraty # # This file is provided in the hope that it will # be of use. There is absolutely NO WARRANTY. # Permission to copy, redistribute or otherwise # use this file is hereby granted provided that # the above copyright notice and this notice are # left intact. # # Please send copies of changes and bug-fixes to: # sjg@crufty.net # # this lets us skip sourcing it again _OS_SH=: OS=`uname` OSREL=`uname -r` OSMAJOR=`IFS=.; set $OSREL; echo $1` MACHINE=`uname -m` MACHINE_ARCH=`uname -p 2>/dev/null || echo $MACHINE` # there is at least one case of `uname -p` outputting # a bunch of usless drivel case "$MACHINE_ARCH" in unknown|*[!A-Za-z0-9_-]*) MACHINE_ARCH="$MACHINE";; esac # we need this here, and it is not always available... Which() { case "$1" in -*) t=$1; shift;; *) t=-x;; esac case "$1" in /*) test $t $1 && echo $1;; *) # some shells cannot correctly handle `IFS` # in conjunction with the for loop. _dirs=`IFS=:; echo ${2:-$PATH}` for d in $_dirs do test $t $d/$1 && { echo $d/$1; break; } done ;; esac } # tr is insanely non-portable wrt char classes, so we need to # spell out the alphabet. sed y/// would work too. toUpper() { ${TR:-tr} abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ } toLower() { ${TR:-tr} ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz } K= case $OS in AIX) # everyone loves to be different... OSMAJOR=`uname -v` OSREL="$OSMAJOR.`uname -r`" LOCAL_FS=jfs PS_AXC=-e SHARE_ARCH=$OS/$OSMAJOR.X ;; Darwin) # a bit like BSD HOST_ARCH=$MACHINE ;; SunOS) CHOWN=`Which chown /usr/etc:/usr/bin` export CHOWN # Great! Solaris keeps moving arch(1) # should just bite the bullet and use uname -p arch=`Which arch /usr/bin:/usr/ucb` MAILER=/usr/ucb/Mail LOCAL_FS=4.2 case "$OSREL" in 4.0*) # uname -m just says sun which could be anything # so use arch(1). MACHINE_ARCH=`arch` MACHINE=$MACHINE_ARCH ;; 4*) MACHINE_ARCH=`arch` ;; 5*) K=-k LOCAL_FS=ufs MAILER=mailx PS_AXC=-e # can you believe that ln on Solaris defaults to # overwriting an existing file!!!!! We want one that works! test -x /usr/xpg4/bin/ln && LN=${LN:-/usr/xpg4/bin/ln} # wonderful, 5.8's tr again require's []'s # but /usr/xpg4/bin/tr causes problems if LC_COLLATE is set! # use toUpper/toLower instead. ;; esac case "$OS/$MACHINE_ARCH" in *sun386) SHARE_ARCH=$MACHINE_ARCH;; esac ;; *BSD) K=-k MAILER=/usr/bin/Mail LOCAL_FS=local : $-,$ENV case "$-,$ENV" in *i*,*) ;; *,|*ENVFILE*) ;; *) ENV=;; esac # NetBSD at least has good backward compatibility # so NetBSD/i386 is good enough case $OS in NetBSD) LOCALBASE=/usr/pkg HOST_ARCH=$MACHINE SHARE_ARCH=$OS/$HOST_ARCH ;; OpenBSD) arch=`Which arch /usr/bin:/usr/ucb:$PATH` MACHINE_ARCH=`$arch -s` ;; esac NAWK=awk export NAWK ;; HP-UX) TMP_DIRS="/tmp /usr/tmp" LOCAL_FS=hfs MAILER=mailx # don't rely on /bin/sh, its broken _shell=/bin/ksh; ENV= # also, no one would be interested in OSMAJOR=A case "$OSREL" in ?.09*) OSMAJOR=9; PS_AXC=-e;; ?.10*) OSMAJOR=10; PS_AXC=-e;; esac ;; IRIX) LOCAL_FS=efs ;; Interix) MACHINE=i386 MACHINE_ARCH=i386 ;; -UnixWare) +UnixWare|SCO_SV) OSREL=`uname -v` OSMAJOR=`IFS=.; set $OSREL; echo $1` MACHINE_ARCH=`uname -m` ;; Linux) # Not really any such thing as Linux, but # this covers red-hat and hopefully others. case $MACHINE in i?86) MACHINE_ARCH=i386;; # we don't care about i686 vs i586 esac LOCAL_FS=ext2 PS_AXC=axc [ -x /usr/bin/md5sum ] && { MD5=/usr/bin/md5sum; export MD5; } ;; QNX) case $MACHINE in x86pc) MACHINE_ARCH=i386;; esac ;; Haiku) case $MACHINE in BeBox) MACHINE_ARCH=powerpc;; BeMac) MACHINE_ARCH=powerpc;; BePC) MACHINE_ARCH=i386;; esac ;; esac LOCALBASE=${LOCALBASE:-/usr/local} HOSTNAME=${HOSTNAME:-`( hostname ) 2>/dev/null`} HOSTNAME=${HOSTNAME:-`( uname -n ) 2>/dev/null`} case "$HOSTNAME" in *.*) HOST=`IFS=.; set -- $HOSTNAME; echo $1`;; *) HOST=$HOSTNAME;; esac TMP_DIRS=${TMP_DIRS:-"/tmp /var/tmp"} MACHINE_ARCH=${MACHINE_ARCH:-$MACHINE} HOST_ARCH=${HOST_ARCH:-$MACHINE_ARCH} case "$HOST_ARCH" in x86*64|amd64) MACHINE32_ARCH=i386;; *64) MACHINE32_ARCH=`echo $MACHINE_ARCH | sed 's,64,32,'`;; *) MACHINE32_ARCH=$MACHINE_ARCH;; esac HOST_ARCH32=${HOST_ARCH32:-$MACHINE32_ARCH} # we mount server:/share/arch/$SHARE_ARCH as /usr/local SHARE_ARCH_DEFAULT=$OS/$OSMAJOR.X/$HOST_ARCH SHARE_ARCH=${SHARE_ARCH:-$SHARE_ARCH_DEFAULT} LN=${LN:-ln} TR=${TR:-tr} # Some people like have /share/$HOST_TARGET/bin etc. HOST_TARGET=`echo ${OS}${OSMAJOR}-$HOST_ARCH | tr -d / | toLower` HOST_TARGET32=`echo ${OS}${OSMAJOR}-$HOST_ARCH32 | tr -d / | toLower` export HOST_TARGET HOST_TARGET32 case `echo -n .` in -n*) N=; C="\c";; *) N=-n; C=;; esac Echo() { case "$1" in -n) _n=$N _c=$C; shift;; *) _n= _c=;; esac echo $_n "$@" $_c } export HOSTNAME HOST export OS MACHINE MACHINE_ARCH OSREL OSMAJOR LOCAL_FS TMP_DIRS MAILER N C K PS_AXC export LN SHARE_ARCH TR export LOCALBASE case /$0 in */os.sh) for v in $* do eval vv=\$$v echo "$v='$vv'" done ;; */host_target32) echo $HOST_TARGET32;; */host_target) echo $HOST_TARGET;; esac diff --git a/contrib/bmake/parse.c b/contrib/bmake/parse.c index 3c2d75acdf9a..6a310c74ba5c 100644 --- a/contrib/bmake/parse.c +++ b/contrib/bmake/parse.c @@ -1,3326 +1,3323 @@ -/* $NetBSD: parse.c,v 1.560 2021/06/21 10:42:06 rillig Exp $ */ +/* $NetBSD: parse.c,v 1.574 2021/12/12 15:44:41 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Parsing of makefiles. * * Parse_File is the main entry point and controls most of the other * functions in this module. * * The directories for the .include "..." directive are kept in * 'parseIncPath', while those for .include <...> are kept in 'sysIncPath'. * The targets currently being defined are kept in 'targets'. * * Interface: * Parse_Init Initialize the module * * Parse_End Clean up the module * * Parse_File Parse a top-level makefile. Included files are * handled by IncludeFile instead. * * Parse_IsVar Return true if the given line is a variable * assignment. Used by MainParseArgs to determine if * an argument is a target or a variable assignment. * Used internally for pretty much the same thing. * * Parse_Error Report a parse error, a warning or an informational * message. * * Parse_MainName Returns a list of the main target to create. */ #include #include #include #include #include "make.h" #ifdef HAVE_STDINT_H #include #endif #ifdef HAVE_MMAP #include #ifndef MAP_COPY #define MAP_COPY MAP_PRIVATE #endif #ifndef MAP_FILE #define MAP_FILE 0 #endif #endif #include "dir.h" #include "job.h" #include "pathnames.h" /* "@(#)parse.c 8.3 (Berkeley) 3/19/94" */ -MAKE_RCSID("$NetBSD: parse.c,v 1.560 2021/06/21 10:42:06 rillig Exp $"); +MAKE_RCSID("$NetBSD: parse.c,v 1.574 2021/12/12 15:44:41 rillig Exp $"); /* types and constants */ /* * Structure for a file being read ("included file") */ typedef struct IFile { char *fname; /* name of file (relative? absolute?) */ bool fromForLoop; /* simulated .include by the .for loop */ int lineno; /* current line number in file */ int first_lineno; /* line number of start of text */ unsigned int cond_depth; /* 'if' nesting when file opened */ bool depending; /* state of doing_depend on EOF */ - /* The buffer from which the file's content is read. */ + /* + * The buffer from which the file's content is read. The buffer + * always ends with '\n', the buffer is not null-terminated, that is, + * buf_end[0] is already out of bounds. + */ char *buf_freeIt; char *buf_ptr; /* next char to be read */ - char *buf_end; + char *buf_end; /* buf_end[-1] == '\n' */ /* Function to read more data, with a single opaque argument. */ ReadMoreProc readMore; void *readMoreArg; struct loadedfile *lf; /* loadedfile object, if any */ } IFile; /* * Tokens for target attributes */ typedef enum ParseSpecial { SP_ATTRIBUTE, /* Generic attribute */ SP_BEGIN, /* .BEGIN */ SP_DEFAULT, /* .DEFAULT */ SP_DELETE_ON_ERROR, /* .DELETE_ON_ERROR */ SP_END, /* .END */ SP_ERROR, /* .ERROR */ SP_IGNORE, /* .IGNORE */ SP_INCLUDES, /* .INCLUDES; not mentioned in the manual page */ SP_INTERRUPT, /* .INTERRUPT */ SP_LIBS, /* .LIBS; not mentioned in the manual page */ /* .MAIN and we don't have anything user-specified to make */ SP_MAIN, SP_META, /* .META */ SP_MFLAGS, /* .MFLAGS or .MAKEFLAGS */ SP_NOMETA, /* .NOMETA */ SP_NOMETA_CMP, /* .NOMETA_CMP */ SP_NOPATH, /* .NOPATH */ SP_NOT, /* Not special */ SP_NOTPARALLEL, /* .NOTPARALLEL or .NO_PARALLEL */ SP_NULL, /* .NULL; not mentioned in the manual page */ SP_OBJDIR, /* .OBJDIR */ SP_ORDER, /* .ORDER */ SP_PARALLEL, /* .PARALLEL; not mentioned in the manual page */ SP_PATH, /* .PATH or .PATH.suffix */ SP_PHONY, /* .PHONY */ #ifdef POSIX SP_POSIX, /* .POSIX; not mentioned in the manual page */ #endif SP_PRECIOUS, /* .PRECIOUS */ SP_SHELL, /* .SHELL */ SP_SILENT, /* .SILENT */ SP_SINGLESHELL, /* .SINGLESHELL; not mentioned in the manual page */ SP_STALE, /* .STALE */ SP_SUFFIXES, /* .SUFFIXES */ SP_WAIT /* .WAIT */ } ParseSpecial; typedef List SearchPathList; typedef ListNode SearchPathListNode; /* result data */ /* * The main target to create. This is the first target on the first * dependency line in the first makefile. */ static GNode *mainNode; /* eval state */ /* * During parsing, the targets from the left-hand side of the currently * active dependency line, or NULL if the current line does not belong to a * dependency line, for example because it is a variable assignment. * * See unit-tests/deptgt.mk, keyword "parse.c:targets". */ static GNodeList *targets; #ifdef CLEANUP /* * All shell commands for all targets, in no particular order and possibly * with duplicates. Kept in a separate list since the commands from .USE or * .USEBEFORE nodes are shared with other GNodes, thereby giving up the * easily understandable ownership over the allocated strings. */ static StringList targCmds = LST_INIT; #endif /* * Predecessor node for handling .ORDER. Initialized to NULL when .ORDER * seen, then set to each successive source on the line. */ static GNode *order_pred; /* parser state */ /* number of fatal errors */ -static int fatals = 0; +static int parseErrors = 0; /* * Variables for doing includes */ /* * The include chain of makefiles. At index 0 is the top-level makefile from * the command line, followed by the included files or .for loops, up to and * including the current file. * * See PrintStackTrace for how to interpret the data. */ static Vector /* of IFile */ includes; static IFile * GetInclude(size_t i) { return Vector_Get(&includes, i); } /* The file that is currently being read. */ static IFile * CurFile(void) { return GetInclude(includes.len - 1); } /* include paths */ SearchPath *parseIncPath; /* directories for "..." includes */ SearchPath *sysIncPath; /* directories for <...> includes */ SearchPath *defSysIncPath; /* default for sysIncPath */ /* parser tables */ /* * The parseKeywords table is searched using binary search when deciding * if a target or source is special. The 'spec' field is the ParseSpecial * type of the keyword (SP_NOT if the keyword isn't special as a target) while * the 'op' field is the operator to apply to the list of targets if the * keyword is used as a source ("0" if the keyword isn't special as a source) */ static const struct { - const char *name; /* Name of keyword */ + const char name[17]; /* Name of keyword */ ParseSpecial spec; /* Type when used as a target */ GNodeType op; /* Operator when used as a source */ } parseKeywords[] = { { ".BEGIN", SP_BEGIN, OP_NONE }, { ".DEFAULT", SP_DEFAULT, OP_NONE }, { ".DELETE_ON_ERROR", SP_DELETE_ON_ERROR, OP_NONE }, { ".END", SP_END, OP_NONE }, { ".ERROR", SP_ERROR, OP_NONE }, { ".EXEC", SP_ATTRIBUTE, OP_EXEC }, { ".IGNORE", SP_IGNORE, OP_IGNORE }, { ".INCLUDES", SP_INCLUDES, OP_NONE }, { ".INTERRUPT", SP_INTERRUPT, OP_NONE }, { ".INVISIBLE", SP_ATTRIBUTE, OP_INVISIBLE }, { ".JOIN", SP_ATTRIBUTE, OP_JOIN }, { ".LIBS", SP_LIBS, OP_NONE }, { ".MADE", SP_ATTRIBUTE, OP_MADE }, { ".MAIN", SP_MAIN, OP_NONE }, { ".MAKE", SP_ATTRIBUTE, OP_MAKE }, { ".MAKEFLAGS", SP_MFLAGS, OP_NONE }, { ".META", SP_META, OP_META }, { ".MFLAGS", SP_MFLAGS, OP_NONE }, { ".NOMETA", SP_NOMETA, OP_NOMETA }, { ".NOMETA_CMP", SP_NOMETA_CMP, OP_NOMETA_CMP }, { ".NOPATH", SP_NOPATH, OP_NOPATH }, { ".NOTMAIN", SP_ATTRIBUTE, OP_NOTMAIN }, { ".NOTPARALLEL", SP_NOTPARALLEL, OP_NONE }, { ".NO_PARALLEL", SP_NOTPARALLEL, OP_NONE }, { ".NULL", SP_NULL, OP_NONE }, { ".OBJDIR", SP_OBJDIR, OP_NONE }, { ".OPTIONAL", SP_ATTRIBUTE, OP_OPTIONAL }, { ".ORDER", SP_ORDER, OP_NONE }, { ".PARALLEL", SP_PARALLEL, OP_NONE }, { ".PATH", SP_PATH, OP_NONE }, { ".PHONY", SP_PHONY, OP_PHONY }, #ifdef POSIX { ".POSIX", SP_POSIX, OP_NONE }, #endif { ".PRECIOUS", SP_PRECIOUS, OP_PRECIOUS }, { ".RECURSIVE", SP_ATTRIBUTE, OP_MAKE }, { ".SHELL", SP_SHELL, OP_NONE }, { ".SILENT", SP_SILENT, OP_SILENT }, { ".SINGLESHELL", SP_SINGLESHELL, OP_NONE }, { ".STALE", SP_STALE, OP_NONE }, { ".SUFFIXES", SP_SUFFIXES, OP_NONE }, { ".USE", SP_ATTRIBUTE, OP_USE }, { ".USEBEFORE", SP_ATTRIBUTE, OP_USEBEFORE }, { ".WAIT", SP_WAIT, OP_NONE }, }; /* file loader */ struct loadedfile { - /* XXX: What is the lifetime of this path? Who manages the memory? */ - const char *path; /* name, for error reports */ char *buf; /* contents buffer */ size_t len; /* length of contents */ bool used; /* XXX: have we used the data yet */ }; /* XXX: What is the lifetime of the path? Who manages the memory? */ static struct loadedfile * -loadedfile_create(const char *path, char *buf, size_t buflen) +loadedfile_create(char *buf, size_t buflen) { struct loadedfile *lf; lf = bmake_malloc(sizeof *lf); - lf->path = path == NULL ? "(stdin)" : path; lf->buf = buf; lf->len = buflen; lf->used = false; return lf; } static void loadedfile_destroy(struct loadedfile *lf) { free(lf->buf); free(lf); } /* * readMore() operation for loadedfile, as needed by the weird and twisted * logic below. Once that's cleaned up, we can get rid of lf->used. */ static char * loadedfile_readMore(void *x, size_t *len) { struct loadedfile *lf = x; if (lf->used) return NULL; lf->used = true; *len = lf->len; return lf->buf; } /* * Try to get the size of a file. */ static bool load_getsize(int fd, size_t *ret) { struct stat st; if (fstat(fd, &st) < 0) return false; if (!S_ISREG(st.st_mode)) return false; /* * st_size is an off_t, which is 64 bits signed; *ret is * size_t, which might be 32 bits unsigned or 64 bits * unsigned. Rather than being elaborate, just punt on * files that are more than 1 GiB. We should never * see a makefile that size in practice. * * While we're at it reject negative sizes too, just in case. */ if (st.st_size < 0 || st.st_size > 0x3fffffff) return false; *ret = (size_t)st.st_size; return true; } /* * Read in a file. * * Until the path search logic can be moved under here instead of * being in the caller in another source file, we need to have the fd * passed in already open. Bleh. * * If the path is NULL, use stdin. */ static struct loadedfile * loadfile(const char *path, int fd) { ssize_t n; Buffer buf; size_t filesize; if (path == NULL) { assert(fd == -1); fd = STDIN_FILENO; } if (load_getsize(fd, &filesize)) { /* * Avoid resizing the buffer later for no reason. * * At the same time leave space for adding a final '\n', * just in case it is missing in the file. */ filesize++; } else filesize = 1024; Buf_InitSize(&buf, filesize); for (;;) { assert(buf.len <= buf.cap); if (buf.len == buf.cap) { if (buf.cap > 0x1fffffff) { errno = EFBIG; Error("%s: file too large", path); exit(2); /* Not 1 so -q can distinguish error */ } Buf_Expand(&buf); } assert(buf.len < buf.cap); n = read(fd, buf.data + buf.len, buf.cap - buf.len); if (n < 0) { Error("%s: read error: %s", path, strerror(errno)); exit(2); /* Not 1 so -q can distinguish error */ } if (n == 0) break; buf.len += (size_t)n; } assert(buf.len <= buf.cap); if (!Buf_EndsWith(&buf, '\n')) Buf_AddByte(&buf, '\n'); if (path != NULL) close(fd); { - struct loadedfile *lf = loadedfile_create(path, - buf.data, buf.len); + struct loadedfile *lf = loadedfile_create(buf.data, buf.len); Buf_DoneData(&buf); return lf; } } static void PrintStackTrace(void) { const IFile *entries; size_t i, n; if (!(DEBUG(PARSE))) return; entries = GetInclude(0); n = includes.len; if (n == 0) return; n--; /* This entry is already in the diagnostic. */ /* * For the IFiles with fromForLoop, lineno seems to be sorted * backwards. This is because lineno is the number of completely * parsed lines, which for a .for loop is right after the * corresponding .endfor. The intuitive line number comes from * first_lineno instead, which points at the start of the .for loop. * * To make the stack trace intuitive, the entry below each chain of * .for loop entries must be ignored completely since neither its * lineno nor its first_lineno is useful. Instead, the topmost of * each chain of .for loop entries needs to be printed twice, once * with its first_lineno and once with its lineno. */ for (i = n; i-- > 0;) { const IFile *entry = entries + i; const char *fname = entry->fname; bool printLineno; char dirbuf[MAXPATHLEN + 1]; if (fname[0] != '/' && strcmp(fname, "(stdin)") != 0) fname = realpath(fname, dirbuf); printLineno = !entry->fromForLoop; if (i + 1 < n && entries[i + 1].fromForLoop == printLineno) printLineno = entry->fromForLoop; if (printLineno) debug_printf("\tin .include from %s:%d\n", fname, entry->lineno); if (entry->fromForLoop) debug_printf("\tin .for loop from %s:%d\n", fname, entry->first_lineno); } } /* Check if the current character is escaped on the current line. */ static bool ParseIsEscaped(const char *line, const char *c) { bool active = false; for (;;) { if (line == c) return active; if (*--c != '\\') return active; active = !active; } } /* * Add the filename and lineno to the GNode so that we remember where it * was first defined. */ static void -ParseMark(GNode *gn) +RememberLocation(GNode *gn) { IFile *curFile = CurFile(); gn->fname = curFile->fname; gn->lineno = curFile->lineno; } /* * Look in the table of keywords for one matching the given string. * Return the index of the keyword, or -1 if it isn't there. */ static int ParseFindKeyword(const char *str) { int start = 0; int end = sizeof parseKeywords / sizeof parseKeywords[0] - 1; do { int curr = start + (end - start) / 2; int diff = strcmp(str, parseKeywords[curr].name); if (diff == 0) return curr; if (diff < 0) end = curr - 1; else start = curr + 1; } while (start <= end); return -1; } static void PrintLocation(FILE *f, const char *fname, size_t lineno) { char dirbuf[MAXPATHLEN + 1]; FStr dir, base; if (*fname == '/' || strcmp(fname, "(stdin)") == 0) { (void)fprintf(f, "\"%s\" line %u: ", fname, (unsigned)lineno); return; } /* Find out which makefile is the culprit. * We try ${.PARSEDIR} and apply realpath(3) if not absolute. */ dir = Var_Value(SCOPE_GLOBAL, ".PARSEDIR"); if (dir.str == NULL) dir.str = "."; if (dir.str[0] != '/') dir.str = realpath(dir.str, dirbuf); base = Var_Value(SCOPE_GLOBAL, ".PARSEFILE"); if (base.str == NULL) base.str = str_basename(fname); (void)fprintf(f, "\"%s/%s\" line %u: ", dir.str, base.str, (unsigned)lineno); FStr_Done(&base); FStr_Done(&dir); } static void ParseVErrorInternal(FILE *f, const char *fname, size_t lineno, ParseErrorLevel type, const char *fmt, va_list ap) { static bool fatal_warning_error_printed = false; (void)fprintf(f, "%s: ", progname); if (fname != NULL) PrintLocation(f, fname, lineno); if (type == PARSE_WARNING) (void)fprintf(f, "warning: "); (void)vfprintf(f, fmt, ap); (void)fprintf(f, "\n"); (void)fflush(f); if (type == PARSE_INFO) goto print_stack_trace; if (type == PARSE_WARNING && !opts.parseWarnFatal) goto print_stack_trace; - fatals++; + parseErrors++; if (type == PARSE_WARNING && !fatal_warning_error_printed) { Error("parsing warnings being treated as errors"); fatal_warning_error_printed = true; } print_stack_trace: PrintStackTrace(); } static void ParseErrorInternal(const char *fname, size_t lineno, ParseErrorLevel type, const char *fmt, ...) { va_list ap; (void)fflush(stdout); va_start(ap, fmt); ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); va_end(ap); if (opts.debug_file != stderr && opts.debug_file != stdout) { va_start(ap, fmt); ParseVErrorInternal(opts.debug_file, fname, lineno, type, fmt, ap); va_end(ap); } } /* * Print a parse error message, including location information. * * If the level is PARSE_FATAL, continue parsing until the end of the * current top-level makefile, then exit (see Parse_File). * * Fmt is given without a trailing newline. */ void Parse_Error(ParseErrorLevel type, const char *fmt, ...) { va_list ap; const char *fname; size_t lineno; if (includes.len == 0) { fname = NULL; lineno = 0; } else { IFile *curFile = CurFile(); fname = curFile->fname; lineno = (size_t)curFile->lineno; } va_start(ap, fmt); (void)fflush(stdout); ParseVErrorInternal(stderr, fname, lineno, type, fmt, ap); va_end(ap); if (opts.debug_file != stderr && opts.debug_file != stdout) { va_start(ap, fmt); ParseVErrorInternal(opts.debug_file, fname, lineno, type, fmt, ap); va_end(ap); } } /* * Parse and handle an .info, .warning or .error directive. * For an .error directive, immediately exit. */ static void ParseMessage(ParseErrorLevel level, const char *levelName, const char *umsg) { char *xmsg; if (umsg[0] == '\0') { Parse_Error(PARSE_FATAL, "Missing argument for \".%s\"", levelName); return; } (void)Var_Subst(umsg, SCOPE_CMDLINE, VARE_WANTRES, &xmsg); /* TODO: handle errors */ Parse_Error(level, "%s", xmsg); free(xmsg); if (level == PARSE_FATAL) { PrintOnError(NULL, NULL); exit(1); } } /* * Add the child to the parent's children. * * Additionally, add the parent to the child's parents, but only if the * target is not special. An example for such a special target is .END, * which does not need to be informed once the child target has been made. */ static void LinkSource(GNode *pgn, GNode *cgn, bool isSpecial) { if ((pgn->type & OP_DOUBLEDEP) && !Lst_IsEmpty(&pgn->cohorts)) pgn = pgn->cohorts.last->datum; Lst_Append(&pgn->children, cgn); pgn->unmade++; /* Special targets like .END don't need any children. */ if (!isSpecial) Lst_Append(&cgn->parents, pgn); if (DEBUG(PARSE)) { debug_printf("# %s: added child %s - %s\n", __func__, pgn->name, cgn->name); Targ_PrintNode(pgn, 0); Targ_PrintNode(cgn, 0); } } /* Add the node to each target from the current dependency group. */ static void LinkToTargets(GNode *gn, bool isSpecial) { GNodeListNode *ln; for (ln = targets->first; ln != NULL; ln = ln->next) LinkSource(ln->datum, gn, isSpecial); } static bool TryApplyDependencyOperator(GNode *gn, GNodeType op) { /* * If the node occurred on the left-hand side of a dependency and the * operator also defines a dependency, they must match. */ if ((op & OP_OPMASK) && (gn->type & OP_OPMASK) && ((op & OP_OPMASK) != (gn->type & OP_OPMASK))) { Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name); return false; } if (op == OP_DOUBLEDEP && (gn->type & OP_OPMASK) == OP_DOUBLEDEP) { /* * If the node was of the left-hand side of a '::' operator, * we need to create a new instance of it for the children * and commands on this dependency line since each of these * dependency groups has its own attributes and commands, * separate from the others. * * The new instance is placed on the 'cohorts' list of the * initial one (note the initial one is not on its own * cohorts list) and the new instance is linked to all * parents of the initial instance. */ GNode *cohort; /* * Propagate copied bits to the initial node. They'll be * propagated back to the rest of the cohorts later. */ gn->type |= op & ~OP_OPMASK; cohort = Targ_NewInternalNode(gn->name); if (doing_depend) - ParseMark(cohort); + RememberLocation(cohort); /* * Make the cohort invisible as well to avoid duplicating it * into other variables. True, parents of this target won't * tend to do anything with their local variables, but better * safe than sorry. * * (I think this is pointless now, since the relevant list * traversals will no longer see this node anyway. -mycroft) */ cohort->type = op | OP_INVISIBLE; Lst_Append(&gn->cohorts, cohort); cohort->centurion = gn; gn->unmade_cohorts++; snprintf(cohort->cohort_num, sizeof cohort->cohort_num, "#%d", (unsigned int)gn->unmade_cohorts % 1000000); } else { /* * We don't want to nuke any previous flags (whatever they * were) so we just OR the new operator into the old. */ gn->type |= op; } return true; } static void ApplyDependencyOperator(GNodeType op) { GNodeListNode *ln; for (ln = targets->first; ln != NULL; ln = ln->next) if (!TryApplyDependencyOperator(ln->datum, op)) break; } /* * We add a .WAIT node in the dependency list. After any dynamic dependencies * (and filename globbing) have happened, it is given a dependency on each * previous child, back until the previous .WAIT node. The next child won't * be scheduled until the .WAIT node is built. * * We give each .WAIT node a unique name (mainly for diagnostics). */ static void ParseDependencySourceWait(bool isSpecial) { static int wait_number = 0; char wait_src[16]; GNode *gn; snprintf(wait_src, sizeof wait_src, ".WAIT_%u", ++wait_number); gn = Targ_NewInternalNode(wait_src); if (doing_depend) - ParseMark(gn); + RememberLocation(gn); gn->type = OP_WAIT | OP_PHONY | OP_DEPENDS | OP_NOTMAIN; LinkToTargets(gn, isSpecial); } static bool ParseDependencySourceKeyword(const char *src, ParseSpecial specType) { int keywd; GNodeType op; if (*src != '.' || !ch_isupper(src[1])) return false; keywd = ParseFindKeyword(src); if (keywd == -1) return false; op = parseKeywords[keywd].op; if (op != OP_NONE) { ApplyDependencyOperator(op); return true; } if (parseKeywords[keywd].spec == SP_WAIT) { ParseDependencySourceWait(specType != SP_NOT); return true; } return false; } static void ParseDependencySourceMain(const char *src) { /* * In a line like ".MAIN: source1 source2", add all sources to the * list of things to create, but only if the user didn't specify a * target on the command line and .MAIN occurs for the first time. * * See ParseDependencyTargetSpecial, branch SP_MAIN. * See unit-tests/cond-func-make-main.mk. */ Lst_Append(&opts.create, bmake_strdup(src)); /* * Add the name to the .TARGETS variable as well, so the user can * employ that, if desired. */ Global_Append(".TARGETS", src); } static void ParseDependencySourceOrder(const char *src) { GNode *gn; /* * Create proper predecessor/successor links between the previous * source and the current one. */ gn = Targ_GetNode(src); if (doing_depend) - ParseMark(gn); + RememberLocation(gn); if (order_pred != NULL) { Lst_Append(&order_pred->order_succ, gn); Lst_Append(&gn->order_pred, order_pred); if (DEBUG(PARSE)) { debug_printf("# %s: added Order dependency %s - %s\n", __func__, order_pred->name, gn->name); Targ_PrintNode(order_pred, 0); Targ_PrintNode(gn, 0); } } /* * The current source now becomes the predecessor for the next one. */ order_pred = gn; } static void ParseDependencySourceOther(const char *src, GNodeType tOp, ParseSpecial specType) { GNode *gn; /* * The source is not an attribute, so find/create a node for it. * After that, apply any operator to it from a special target or * link it to its parents, as appropriate. * * In the case of a source that was the object of a '::' operator, * the attribute is applied to all of its instances (as kept in * the 'cohorts' list of the node) or all the cohorts are linked * to all the targets. */ /* Find/create the 'src' node and attach to all targets */ gn = Targ_GetNode(src); if (doing_depend) - ParseMark(gn); + RememberLocation(gn); if (tOp != OP_NONE) gn->type |= tOp; else LinkToTargets(gn, specType != SP_NOT); } /* * Given the name of a source in a dependency line, figure out if it is an * attribute (such as .SILENT) and apply it to the targets if it is. Else * decide if there is some attribute which should be applied *to* the source * because of some special target (such as .PHONY) and apply it if so. * Otherwise, make the source a child of the targets in the list 'targets'. * * Input: * tOp operator (if any) from special targets * src name of the source to handle */ static void ParseDependencySource(GNodeType tOp, const char *src, ParseSpecial specType) { if (ParseDependencySourceKeyword(src, specType)) return; if (specType == SP_MAIN) ParseDependencySourceMain(src); else if (specType == SP_ORDER) ParseDependencySourceOrder(src); else ParseDependencySourceOther(src, tOp, specType); } /* * If we have yet to decide on a main target to make, in the absence of any * user input, we want the first target on the first dependency line that is * actually a real target (i.e. isn't a .USE or .EXEC rule) to be made. */ static void FindMainTarget(void) { GNodeListNode *ln; if (mainNode != NULL) return; for (ln = targets->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; if (!(gn->type & OP_NOTARGET)) { DEBUG1(MAKE, "Setting main node to \"%s\"\n", gn->name); mainNode = gn; Targ_SetMain(gn); return; } } } /* * We got to the end of the line while we were still looking at targets. * * Ending a dependency line without an operator is a Bozo no-no. As a * heuristic, this is also often triggered by undetected conflicts from * cvs/rcs merges. */ static void ParseErrorNoDependency(const char *lstart) { if ((strncmp(lstart, "<<<<<<", 6) == 0) || (strncmp(lstart, "======", 6) == 0) || (strncmp(lstart, ">>>>>>", 6) == 0)) Parse_Error(PARSE_FATAL, - "Makefile appears to contain unresolved cvs/rcs/??? merge conflicts"); + "Makefile appears to contain unresolved CVS/RCS/??? merge conflicts"); else if (lstart[0] == '.') { const char *dirstart = lstart + 1; const char *dirend; cpp_skip_whitespace(&dirstart); dirend = dirstart; while (ch_isalnum(*dirend) || *dirend == '-') dirend++; Parse_Error(PARSE_FATAL, "Unknown directive \"%.*s\"", (int)(dirend - dirstart), dirstart); } else Parse_Error(PARSE_FATAL, "Invalid line type"); } static void ParseDependencyTargetWord(const char **pp, const char *lstart) { const char *cp = *pp; while (*cp != '\0') { if ((ch_isspace(*cp) || *cp == '!' || *cp == ':' || *cp == '(') && !ParseIsEscaped(lstart, cp)) break; if (*cp == '$') { /* * Must be a dynamic source (would have been expanded * otherwise), so call the Var module to parse the * puppy so we can safely advance beyond it. * * There should be no errors in this, as they would * have been discovered in the initial Var_Subst and * we wouldn't be here. */ const char *nested_p = cp; FStr nested_val; (void)Var_Parse(&nested_p, SCOPE_CMDLINE, VARE_PARSE_ONLY, &nested_val); /* TODO: handle errors */ FStr_Done(&nested_val); cp += nested_p - cp; } else cp++; } *pp = cp; } /* * Handle special targets like .PATH, .DEFAULT, .BEGIN, .ORDER. * * See the tests deptgt-*.mk. */ static void ParseDependencyTargetSpecial(ParseSpecial *inout_specType, const char *targetName, SearchPathList **inout_paths) { switch (*inout_specType) { case SP_PATH: if (*inout_paths == NULL) *inout_paths = Lst_New(); Lst_Append(*inout_paths, &dirSearchPath); break; case SP_MAIN: /* * Allow targets from the command line to override the * .MAIN node. */ if (!Lst_IsEmpty(&opts.create)) *inout_specType = SP_NOT; break; case SP_BEGIN: case SP_END: case SP_STALE: case SP_ERROR: case SP_INTERRUPT: { GNode *gn = Targ_GetNode(targetName); if (doing_depend) - ParseMark(gn); + RememberLocation(gn); gn->type |= OP_NOTMAIN | OP_SPECIAL; Lst_Append(targets, gn); break; } case SP_DEFAULT: { /* * Need to create a node to hang commands on, but we don't * want it in the graph, nor do we want it to be the Main * Target. We claim the node is a transformation rule to make * life easier later, when we'll use Make_HandleUse to * actually apply the .DEFAULT commands. */ GNode *gn = GNode_New(".DEFAULT"); gn->type |= OP_NOTMAIN | OP_TRANSFORM; Lst_Append(targets, gn); defaultNode = gn; break; } case SP_DELETE_ON_ERROR: deleteOnError = true; break; case SP_NOTPARALLEL: opts.maxJobs = 1; break; case SP_SINGLESHELL: opts.compatMake = true; break; case SP_ORDER: order_pred = NULL; break; default: break; } } /* * .PATH has to be handled specially. * Call on the suffix module to give us a path to modify. */ static bool ParseDependencyTargetPath(const char *suffixName, SearchPathList **inout_paths) { SearchPath *path; path = Suff_GetPath(suffixName); if (path == NULL) { Parse_Error(PARSE_FATAL, "Suffix '%s' not defined (yet)", suffixName); return false; } if (*inout_paths == NULL) *inout_paths = Lst_New(); Lst_Append(*inout_paths, path); return true; } /* * See if it's a special target and if so set specType to match it. */ static bool ParseDependencyTarget(const char *targetName, ParseSpecial *inout_specType, GNodeType *out_tOp, SearchPathList **inout_paths) { int keywd; if (!(targetName[0] == '.' && ch_isupper(targetName[1]))) return true; /* * See if the target is a special target that must have it * or its sources handled specially. */ keywd = ParseFindKeyword(targetName); if (keywd != -1) { if (*inout_specType == SP_PATH && parseKeywords[keywd].spec != SP_PATH) { Parse_Error(PARSE_FATAL, "Mismatched special targets"); return false; } *inout_specType = parseKeywords[keywd].spec; *out_tOp = parseKeywords[keywd].op; ParseDependencyTargetSpecial(inout_specType, targetName, inout_paths); } else if (strncmp(targetName, ".PATH", 5) == 0) { *inout_specType = SP_PATH; if (!ParseDependencyTargetPath(targetName + 5, inout_paths)) return false; } return true; } static void ParseDependencyTargetMundane(char *targetName, StringList *curTargs) { if (Dir_HasWildcards(targetName)) { /* * Targets are to be sought only in the current directory, * so create an empty path for the thing. Note we need to * use Dir_Destroy in the destruction of the path as the * Dir module could have added a directory to the path... */ SearchPath *emptyPath = SearchPath_New(); SearchPath_Expand(emptyPath, targetName, curTargs); SearchPath_Free(emptyPath); } else { /* * No wildcards, but we want to avoid code duplication, * so create a list with the word on it. */ Lst_Append(curTargs, targetName); } /* Apply the targets. */ while (!Lst_IsEmpty(curTargs)) { char *targName = Lst_Dequeue(curTargs); GNode *gn = Suff_IsTransform(targName) ? Suff_AddTransform(targName) : Targ_GetNode(targName); if (doing_depend) - ParseMark(gn); + RememberLocation(gn); Lst_Append(targets, gn); } } static void ParseDependencyTargetExtraWarn(char **pp, const char *lstart) { bool warning = false; char *cp = *pp; while (*cp != '\0') { if (!ParseIsEscaped(lstart, cp) && (*cp == '!' || *cp == ':')) break; if (ParseIsEscaped(lstart, cp) || (*cp != ' ' && *cp != '\t')) warning = true; cp++; } if (warning) Parse_Error(PARSE_WARNING, "Extra target ignored"); *pp = cp; } static void ParseDependencyCheckSpec(ParseSpecial specType) { switch (specType) { default: Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. " "Mundane ones ignored"); break; case SP_DEFAULT: case SP_STALE: case SP_BEGIN: case SP_END: case SP_ERROR: case SP_INTERRUPT: /* * These create nodes on which to hang commands, so targets * shouldn't be empty. */ case SP_NOT: /* Nothing special here -- targets can be empty if it wants. */ break; } } /* * In a dependency line like 'targets: sources' or 'targets! sources', parse * the operator ':', '::' or '!' from between the targets and the sources. */ static bool ParseDependencyOp(char **pp, const char *lstart, GNodeType *out_op) { const char *cp = *pp; if (*cp == '!') { *out_op = OP_FORCE; (*pp)++; return true; } if (*cp == ':') { if (cp[1] == ':') { *out_op = OP_DOUBLEDEP; (*pp) += 2; } else { *out_op = OP_DEPENDS; (*pp)++; } return true; } { const char *msg = lstart[0] == '.' ? "Unknown directive" : "Missing dependency operator"; Parse_Error(PARSE_FATAL, "%s", msg); return false; } } static void ClearPaths(SearchPathList *paths) { if (paths != NULL) { SearchPathListNode *ln; for (ln = paths->first; ln != NULL; ln = ln->next) SearchPath_Clear(ln->datum); } Dir_SetPATH(); } /* * Several special targets take different actions if present with no * sources: * a .SUFFIXES line with no sources clears out all old suffixes * a .PRECIOUS line makes all targets precious * a .IGNORE line ignores errors for all targets * a .SILENT line creates silence when making all targets * a .PATH removes all directories from the search path(s). */ static void ParseDependencySourcesEmpty(ParseSpecial specType, SearchPathList *paths) { switch (specType) { case SP_SUFFIXES: Suff_ClearSuffixes(); break; case SP_PRECIOUS: allPrecious = true; break; case SP_IGNORE: opts.ignoreErrors = true; break; case SP_SILENT: opts.beSilent = true; break; case SP_PATH: ClearPaths(paths); break; #ifdef POSIX case SP_POSIX: Global_Set("%POSIX", "1003.2"); break; #endif default: break; } } static void AddToPaths(const char *dir, SearchPathList *paths) { if (paths != NULL) { SearchPathListNode *ln; for (ln = paths->first; ln != NULL; ln = ln->next) (void)SearchPath_Add(ln->datum, dir); } } /* * If the target was one that doesn't take files as its sources * but takes something like suffixes, we take each * space-separated word on the line as a something and deal * with it accordingly. * * If the target was .SUFFIXES, we take each source as a * suffix and add it to the list of suffixes maintained by the * Suff module. * * If the target was a .PATH, we add the source as a directory * to search on the search path. * * If it was .INCLUDES, the source is taken to be the suffix of * files which will be #included and whose search path should * be present in the .INCLUDES variable. * * If it was .LIBS, the source is taken to be the suffix of * files which are considered libraries and whose search path * should be present in the .LIBS variable. * * If it was .NULL, the source is the suffix to use when a file * has no valid suffix. * * If it was .OBJDIR, the source is a new definition for .OBJDIR, * and will cause make to do a new chdir to that path. */ static void ParseDependencySourceSpecial(ParseSpecial specType, char *word, SearchPathList *paths) { switch (specType) { case SP_SUFFIXES: Suff_AddSuffix(word, &mainNode); break; case SP_PATH: AddToPaths(word, paths); break; case SP_INCLUDES: Suff_AddInclude(word); break; case SP_LIBS: Suff_AddLib(word); break; case SP_NULL: Suff_SetNull(word); break; case SP_OBJDIR: Main_SetObjdir(false, "%s", word); break; default: break; } } static bool ParseDependencyTargets(char **inout_cp, char **inout_line, const char *lstart, ParseSpecial *inout_specType, GNodeType *inout_tOp, SearchPathList **inout_paths, StringList *curTargs) { char *cp; char *tgt = *inout_line; char savec; const char *p; for (;;) { /* * Here LINE points to the beginning of the next word, and * LSTART points to the actual beginning of the line. */ /* Find the end of the next word. */ cp = tgt; p = cp; ParseDependencyTargetWord(&p, lstart); cp += p - cp; /* * If the word is followed by a left parenthesis, it's the * name of an object file inside an archive (ar file). */ if (!ParseIsEscaped(lstart, cp) && *cp == '(') { /* * Archives must be handled specially to make sure the * OP_ARCHV flag is set in their 'type' field, for one * thing, and because things like "archive(file1.o * file2.o file3.o)" are permissible. * * Arch_ParseArchive will set 'line' to be the first * non-blank after the archive-spec. It creates/finds * nodes for the members and places them on the given * list, returning true if all went well and false if * there was an error in the specification. On error, * line should remain untouched. */ if (!Arch_ParseArchive(&tgt, targets, SCOPE_CMDLINE)) { Parse_Error(PARSE_FATAL, "Error in archive specification: \"%s\"", tgt); return false; } cp = tgt; continue; } if (*cp == '\0') { ParseErrorNoDependency(lstart); return false; } /* Insert a null terminator. */ savec = *cp; *cp = '\0'; if (!ParseDependencyTarget(tgt, inout_specType, inout_tOp, inout_paths)) return false; /* * Have word in line. Get or create its node and stick it at * the end of the targets list */ if (*inout_specType == SP_NOT && *tgt != '\0') ParseDependencyTargetMundane(tgt, curTargs); else if (*inout_specType == SP_PATH && *tgt != '.' && *tgt != '\0') Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", tgt); /* Don't need the inserted null terminator any more. */ *cp = savec; /* * If it is a special type and not .PATH, it's the only target * we allow on this line. */ if (*inout_specType != SP_NOT && *inout_specType != SP_PATH) ParseDependencyTargetExtraWarn(&cp, lstart); else pp_skip_whitespace(&cp); tgt = cp; if (*tgt == '\0') break; if ((*tgt == '!' || *tgt == ':') && !ParseIsEscaped(lstart, tgt)) break; } *inout_cp = cp; *inout_line = tgt; return true; } static void ParseDependencySourcesSpecial(char *start, char *end, ParseSpecial specType, SearchPathList *paths) { char savec; while (*start != '\0') { while (*end != '\0' && !ch_isspace(*end)) end++; savec = *end; *end = '\0'; ParseDependencySourceSpecial(specType, start, paths); *end = savec; if (savec != '\0') end++; pp_skip_whitespace(&end); start = end; } } static bool ParseDependencySourcesMundane(char *start, char *end, ParseSpecial specType, GNodeType tOp) { while (*start != '\0') { /* * The targets take real sources, so we must beware of archive * specifications (i.e. things with left parentheses in them) * and handle them accordingly. */ for (; *end != '\0' && !ch_isspace(*end); end++) { if (*end == '(' && end > start && end[-1] != '$') { /* * Only stop for a left parenthesis if it * isn't at the start of a word (that'll be * for variable changes later) and isn't * preceded by a dollar sign (a dynamic * source). */ break; } } if (*end == '(') { GNodeList sources = LST_INIT; if (!Arch_ParseArchive(&start, &sources, SCOPE_CMDLINE)) { Parse_Error(PARSE_FATAL, "Error in source archive spec \"%s\"", start); return false; } while (!Lst_IsEmpty(&sources)) { GNode *gn = Lst_Dequeue(&sources); ParseDependencySource(tOp, gn->name, specType); } Lst_Done(&sources); end = start; } else { if (*end != '\0') { *end = '\0'; end++; } ParseDependencySource(tOp, start, specType); } pp_skip_whitespace(&end); start = end; } return true; } /* * In a dependency line like 'targets: sources', parse the sources. * * See the tests depsrc-*.mk. */ static void -ParseDependencySources(char *const line, char *const cp, - GNodeType const tOp, - ParseSpecial const specType, - SearchPathList ** inout_paths) +ParseDependencySources(char *line, char *cp, GNodeType tOp, + ParseSpecial specType, SearchPathList **inout_paths) { if (line[0] == '\0') { ParseDependencySourcesEmpty(specType, *inout_paths); } else if (specType == SP_MFLAGS) { Main_ParseArgLine(line); /* * Set the initial character to a null-character so the loop * to get sources won't get anything. */ *line = '\0'; } else if (specType == SP_SHELL) { if (!Job_ParseShell(line)) { Parse_Error(PARSE_FATAL, "improper shell specification"); return; } *line = '\0'; } else if (specType == SP_NOTPARALLEL || specType == SP_SINGLESHELL || specType == SP_DELETE_ON_ERROR) { *line = '\0'; } /* Now go for the sources. */ if (specType == SP_SUFFIXES || specType == SP_PATH || specType == SP_INCLUDES || specType == SP_LIBS || specType == SP_NULL || specType == SP_OBJDIR) { ParseDependencySourcesSpecial(line, cp, specType, *inout_paths); if (*inout_paths != NULL) { Lst_Free(*inout_paths); *inout_paths = NULL; } if (specType == SP_PATH) Dir_SetPATH(); } else { assert(*inout_paths == NULL); if (!ParseDependencySourcesMundane(line, cp, specType, tOp)) return; } FindMainTarget(); } /* * Parse a dependency line consisting of targets, followed by a dependency * operator, optionally followed by sources. * * The nodes of the sources are linked as children to the nodes of the * targets. Nodes are created as necessary. * * The operator is applied to each node in the global 'targets' list, * which is where the nodes found for the targets are kept, by means of * the ParseOp function. * * The sources are parsed in much the same way as the targets, except * that they are expanded using the wildcarding scheme of the C-Shell, * and a target is created for each expanded word. Each of the resulting * nodes is then linked to each of the targets as one of its children. * * Certain targets and sources such as .PHONY or .PRECIOUS are handled * specially. These are the ones detailed by the specType variable. * * The storing of transformation rules such as '.c.o' is also taken care of * here. A target is recognized as a transformation rule by calling * Suff_IsTransform. If it is a transformation rule, its node is gotten * from the suffix module via Suff_AddTransform rather than the standard * Targ_FindNode in the target module. * * Upon return, the value of the line is unspecified. */ static void ParseDependency(char *line) { char *cp; /* our current position */ GNodeType op; /* the operator on the line */ SearchPathList *paths; /* search paths to alter when parsing * a list of .PATH targets */ GNodeType tOp; /* operator from special target */ /* target names to be found and added to the targets list */ StringList curTargs = LST_INIT; char *lstart = line; /* * specType contains the SPECial TYPE of the current target. It is * SP_NOT if the target is unspecial. If it *is* special, however, the * children are linked as children of the parent but not vice versa. */ ParseSpecial specType = SP_NOT; DEBUG1(PARSE, "ParseDependency(%s)\n", line); tOp = OP_NONE; paths = NULL; /* * First, grind through the targets. */ /* XXX: don't use 'line' as an iterator variable */ if (!ParseDependencyTargets(&cp, &line, lstart, &specType, &tOp, &paths, &curTargs)) goto out; /* * Don't need the list of target names anymore. * The targets themselves are now in the global variable 'targets'. */ Lst_Done(&curTargs); Lst_Init(&curTargs); if (!Lst_IsEmpty(targets)) ParseDependencyCheckSpec(specType); /* * Have now parsed all the target names. Must parse the operator next. */ if (!ParseDependencyOp(&cp, lstart, &op)) goto out; /* * Apply the operator to the target. This is how we remember which * operator a target was defined with. It fails if the operator * used isn't consistent across all references. */ ApplyDependencyOperator(op); /* * Onward to the sources. * * LINE will now point to the first source word, if any, or the * end of the string if not. */ pp_skip_whitespace(&cp); line = cp; /* XXX: 'line' is an inappropriate name */ ParseDependencySources(line, cp, tOp, specType, &paths); out: if (paths != NULL) Lst_Free(paths); Lst_Done(&curTargs); } typedef struct VarAssignParsed { const char *nameStart; /* unexpanded */ const char *nameEnd; /* before operator adjustment */ const char *eq; /* the '=' of the assignment operator */ } VarAssignParsed; /* * Determine the assignment operator and adjust the end of the variable * name accordingly. */ static void AdjustVarassignOp(const VarAssignParsed *pvar, const char *value, VarAssign *out_var) { const char *op = pvar->eq; const char *const name = pvar->nameStart; VarAssignOp type; if (op > name && op[-1] == '+') { type = VAR_APPEND; op--; } else if (op > name && op[-1] == '?') { op--; type = VAR_DEFAULT; } else if (op > name && op[-1] == ':') { op--; type = VAR_SUBST; } else if (op > name && op[-1] == '!') { op--; type = VAR_SHELL; } else { type = VAR_NORMAL; #ifdef SUNSHCMD while (op > name && ch_isspace(op[-1])) op--; if (op >= name + 3 && op[-3] == ':' && op[-2] == 's' && op[-1] == 'h') { type = VAR_SHELL; op -= 3; } #endif } { const char *nameEnd = pvar->nameEnd < op ? pvar->nameEnd : op; out_var->varname = bmake_strsedup(pvar->nameStart, nameEnd); out_var->op = type; out_var->value = value; } } /* * Parse a variable assignment, consisting of a single-word variable name, * optional whitespace, an assignment operator, optional whitespace and the * variable value. * * Note: There is a lexical ambiguity with assignment modifier characters * in variable names. This routine interprets the character before the = * as a modifier. Therefore, an assignment like * C++=/usr/bin/CC * is interpreted as "C+ +=" instead of "C++ =". * * Used for both lines in a file and command line arguments. */ bool Parse_IsVar(const char *p, VarAssign *out_var) { VarAssignParsed pvar; const char *firstSpace = NULL; int level = 0; cpp_skip_hspace(&p); /* Skip to variable name */ /* * During parsing, the '+' of the '+=' operator is initially parsed * as part of the variable name. It is later corrected, as is the * ':sh' modifier. Of these two (nameEnd and op), the earlier one * determines the actual end of the variable name. */ pvar.nameStart = p; #ifdef CLEANUP pvar.nameEnd = NULL; pvar.eq = NULL; #endif /* * Scan for one of the assignment operators outside a variable * expansion. */ while (*p != '\0') { char ch = *p++; if (ch == '(' || ch == '{') { level++; continue; } if (ch == ')' || ch == '}') { level--; continue; } if (level != 0) continue; if (ch == ' ' || ch == '\t') if (firstSpace == NULL) firstSpace = p - 1; while (ch == ' ' || ch == '\t') ch = *p++; #ifdef SUNSHCMD if (ch == ':' && p[0] == 's' && p[1] == 'h') { p += 2; continue; } #endif if (ch == '=') { pvar.eq = p - 1; pvar.nameEnd = firstSpace != NULL ? firstSpace : p - 1; cpp_skip_whitespace(&p); AdjustVarassignOp(&pvar, p, out_var); return true; } if (*p == '=' && (ch == '+' || ch == ':' || ch == '?' || ch == '!')) { pvar.eq = p; pvar.nameEnd = firstSpace != NULL ? firstSpace : p; p++; cpp_skip_whitespace(&p); AdjustVarassignOp(&pvar, p, out_var); return true; } if (firstSpace != NULL) return false; } return false; } /* * Check for syntax errors such as unclosed expressions or unknown modifiers. */ static void VarCheckSyntax(VarAssignOp type, const char *uvalue, GNode *scope) { if (opts.strict) { if (type != VAR_SUBST && strchr(uvalue, '$') != NULL) { char *expandedValue; (void)Var_Subst(uvalue, scope, VARE_PARSE_ONLY, &expandedValue); /* TODO: handle errors */ free(expandedValue); } } } static void VarAssign_EvalSubst(GNode *scope, const char *name, const char *uvalue, FStr *out_avalue) { char *evalue; /* * make sure that we set the variable the first time to nothing * so that it gets substituted. * * TODO: Add a test that demonstrates why this code is needed, * apart from making the debug log longer. */ if (!Var_ExistsExpand(scope, name)) Var_SetExpand(scope, name, ""); (void)Var_Subst(uvalue, scope, VARE_KEEP_DOLLAR_UNDEF, &evalue); /* TODO: handle errors */ Var_SetExpand(scope, name, evalue); *out_avalue = FStr_InitOwn(evalue); } static void VarAssign_EvalShell(const char *name, const char *uvalue, GNode *scope, FStr *out_avalue) { FStr cmd; const char *errfmt; char *cmdOut; cmd = FStr_InitRefer(uvalue); if (strchr(cmd.str, '$') != NULL) { char *expanded; (void)Var_Subst(cmd.str, SCOPE_CMDLINE, VARE_UNDEFERR, &expanded); /* TODO: handle errors */ cmd = FStr_InitOwn(expanded); } cmdOut = Cmd_Exec(cmd.str, &errfmt); Var_SetExpand(scope, name, cmdOut); *out_avalue = FStr_InitOwn(cmdOut); if (errfmt != NULL) Parse_Error(PARSE_WARNING, errfmt, cmd.str); FStr_Done(&cmd); } /* * Perform a variable assignment. * * The actual value of the variable is returned in *out_true_avalue. * Especially for VAR_SUBST and VAR_SHELL this can differ from the literal * value. * * Return whether the assignment was actually performed, which is usually * the case. It is only skipped if the operator is '?=' and the variable * already exists. */ static bool VarAssign_Eval(const char *name, VarAssignOp op, const char *uvalue, GNode *scope, FStr *out_true_avalue) { FStr avalue = FStr_InitRefer(uvalue); if (op == VAR_APPEND) Var_AppendExpand(scope, name, uvalue); else if (op == VAR_SUBST) VarAssign_EvalSubst(scope, name, uvalue, &avalue); else if (op == VAR_SHELL) VarAssign_EvalShell(name, uvalue, scope, &avalue); else { if (op == VAR_DEFAULT && Var_ExistsExpand(scope, name)) return false; /* Normal assignment -- just do it. */ Var_SetExpand(scope, name, uvalue); } *out_true_avalue = avalue; return true; } static void VarAssignSpecial(const char *name, const char *avalue) { if (strcmp(name, MAKEOVERRIDES) == 0) Main_ExportMAKEFLAGS(false); /* re-export MAKEFLAGS */ else if (strcmp(name, ".CURDIR") == 0) { /* * Someone is being (too?) clever... * Let's pretend they know what they are doing and * re-initialize the 'cur' CachedDir. */ Dir_InitCur(avalue); Dir_SetPATH(); } else if (strcmp(name, MAKE_JOB_PREFIX) == 0) Job_SetPrefix(); else if (strcmp(name, MAKE_EXPORTED) == 0) Var_ExportVars(avalue); } /* Perform the variable variable assignment in the given scope. */ void Parse_Var(VarAssign *var, GNode *scope) { FStr avalue; /* actual value (maybe expanded) */ VarCheckSyntax(var->op, var->value, scope); if (VarAssign_Eval(var->varname, var->op, var->value, scope, &avalue)) { VarAssignSpecial(var->varname, avalue.str); FStr_Done(&avalue); } free(var->varname); } /* * See if the command possibly calls a sub-make by using the variable * expressions ${.MAKE}, ${MAKE} or the plain word "make". */ static bool MaybeSubMake(const char *cmd) { const char *start; for (start = cmd; *start != '\0'; start++) { const char *p = start; char endc; /* XXX: What if progname != "make"? */ if (p[0] == 'm' && p[1] == 'a' && p[2] == 'k' && p[3] == 'e') if (start == cmd || !ch_isalnum(p[-1])) if (!ch_isalnum(p[4])) return true; if (*p != '$') continue; p++; if (*p == '{') endc = '}'; else if (*p == '(') endc = ')'; else continue; p++; if (*p == '.') /* Accept either ${.MAKE} or ${MAKE}. */ p++; if (p[0] == 'M' && p[1] == 'A' && p[2] == 'K' && p[3] == 'E') if (p[4] == endc) return true; } return false; } /* * Append the command to the target node. * * The node may be marked as a submake node if the command is determined to * be that. */ static void ParseAddCmd(GNode *gn, char *cmd) { /* Add to last (ie current) cohort for :: targets */ if ((gn->type & OP_DOUBLEDEP) && gn->cohorts.last != NULL) gn = gn->cohorts.last->datum; /* if target already supplied, ignore commands */ if (!(gn->type & OP_HAS_COMMANDS)) { Lst_Append(&gn->commands, cmd); if (MaybeSubMake(cmd)) gn->type |= OP_SUBMAKE; - ParseMark(gn); + RememberLocation(gn); } else { #if 0 /* XXX: We cannot do this until we fix the tree */ Lst_Append(&gn->commands, cmd); Parse_Error(PARSE_WARNING, "overriding commands for target \"%s\"; " "previous commands defined at %s: %d ignored", gn->name, gn->fname, gn->lineno); #else Parse_Error(PARSE_WARNING, "duplicate script for target \"%s\" ignored", gn->name); ParseErrorInternal(gn->fname, (size_t)gn->lineno, PARSE_WARNING, "using previous script for \"%s\" defined here", gn->name); #endif } } /* * Add a directory to the path searched for included makefiles bracketed * by double-quotes. */ void Parse_AddIncludeDir(const char *dir) { (void)SearchPath_Add(parseIncPath, dir); } /* * Handle one of the .[-ds]include directives by remembering the current file * and pushing the included file on the stack. After the included file has - * finished, parsing continues with the including file; see Parse_SetInput + * finished, parsing continues with the including file; see Parse_PushInput * and ParseEOF. * * System includes are looked up in sysIncPath, any other includes are looked * up in the parsedir and then in the directories specified by the -I command * line options. */ static void -IncludeFile(char *file, bool isSystem, bool depinc, bool silent) +IncludeFile(const char *file, bool isSystem, bool depinc, bool silent) { struct loadedfile *lf; char *fullname; /* full pathname of file */ char *newName; char *slash, *incdir; int fd; int i; fullname = file[0] == '/' ? bmake_strdup(file) : NULL; if (fullname == NULL && !isSystem) { /* * Include files contained in double-quotes are first searched * relative to the including file's location. We don't want to * cd there, of course, so we just tack on the old file's * leading path components and call Dir_FindFile to see if * we can locate the file. */ incdir = bmake_strdup(CurFile()->fname); slash = strrchr(incdir, '/'); if (slash != NULL) { *slash = '\0'; /* * Now do lexical processing of leading "../" on the * filename. */ for (i = 0; strncmp(file + i, "../", 3) == 0; i += 3) { slash = strrchr(incdir + 1, '/'); if (slash == NULL || strcmp(slash, "/..") == 0) break; *slash = '\0'; } newName = str_concat3(incdir, "/", file + i); fullname = Dir_FindFile(newName, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(newName, &dirSearchPath); free(newName); } free(incdir); if (fullname == NULL) { /* * Makefile wasn't found in same directory as included * makefile. * * Search for it first on the -I search path, then on * the .PATH search path, if not found in a -I * directory. If we have a suffix-specific path, we * should use that. */ const char *suff; SearchPath *suffPath = NULL; if ((suff = strrchr(file, '.')) != NULL) { suffPath = Suff_GetPath(suff); if (suffPath != NULL) fullname = Dir_FindFile(file, suffPath); } if (fullname == NULL) { fullname = Dir_FindFile(file, parseIncPath); if (fullname == NULL) fullname = Dir_FindFile(file, &dirSearchPath); } } } /* Looking for a system file or file still not found */ if (fullname == NULL) { /* * Look for it on the system path */ SearchPath *path = Lst_IsEmpty(&sysIncPath->dirs) ? defSysIncPath : sysIncPath; fullname = Dir_FindFile(file, path); } if (fullname == NULL) { if (!silent) Parse_Error(PARSE_FATAL, "Could not find %s", file); return; } /* Actually open the file... */ fd = open(fullname, O_RDONLY); if (fd == -1) { if (!silent) Parse_Error(PARSE_FATAL, "Cannot open %s", fullname); free(fullname); return; } /* load it */ lf = loadfile(fullname, fd); /* Start reading from this file next */ - Parse_SetInput(fullname, 0, -1, loadedfile_readMore, lf); + Parse_PushInput(fullname, 0, -1, loadedfile_readMore, lf); CurFile()->lf = lf; if (depinc) doing_depend = depinc; /* only turn it on */ + /* TODO: consider free(fullname); */ } +/* + * Parse a directive like '.include' or '.-include'. + * + * .include "user-makefile.mk" + * .include + */ static void ParseInclude(char *directive) { - char endc; /* the character which ends the file spec */ - char *cp; /* current position in file spec */ + char endc; /* '>' or '"' */ + char *p; bool silent = directive[0] != 'i'; - char *file = directive + (silent ? 8 : 7); + FStr file; - /* Skip to delimiter character so we know where to look */ - pp_skip_hspace(&file); + p = directive + (silent ? 8 : 7); + pp_skip_hspace(&p); - if (*file != '"' && *file != '<') { + if (*p != '"' && *p != '<') { Parse_Error(PARSE_FATAL, ".include filename must be delimited by '\"' or '<'"); return; } - /* - * Set the search path on which to find the include file based on the - * characters which bracket its name. Angle-brackets imply it's - * a system Makefile while double-quotes imply it's a user makefile - */ - if (*file == '<') + if (*p++ == '<') endc = '>'; else endc = '"'; + file = FStr_InitRefer(p); /* Skip to matching delimiter */ - for (cp = ++file; *cp != '\0' && *cp != endc; cp++) - continue; + while (*p != '\0' && *p != endc) + p++; - if (*cp != endc) { + if (*p != endc) { Parse_Error(PARSE_FATAL, "Unclosed .include filename. '%c' expected", endc); return; } - *cp = '\0'; + *p = '\0'; - /* - * Substitute for any variables in the filename before trying to - * find the file. - */ - (void)Var_Subst(file, SCOPE_CMDLINE, VARE_WANTRES, &file); - /* TODO: handle errors */ + if (strchr(file.str, '$') != NULL) { + char *xfile; + Var_Subst(file.str, SCOPE_CMDLINE, VARE_WANTRES, &xfile); + /* TODO: handle errors */ + file = FStr_InitOwn(xfile); + } - IncludeFile(file, endc == '>', directive[0] == 'd', silent); - free(file); + IncludeFile(file.str, endc == '>', directive[0] == 'd', silent); + FStr_Done(&file); } /* * Split filename into dirname + basename, then assign these to the * given variables. */ static void SetFilenameVars(const char *filename, const char *dirvar, const char *filevar) { const char *slash, *basename; FStr dirname; slash = strrchr(filename, '/'); if (slash == NULL) { dirname = FStr_InitRefer(curdir); basename = filename; } else { dirname = FStr_InitOwn(bmake_strsedup(filename, slash)); basename = slash + 1; } - Global_SetExpand(dirvar, dirname.str); - Global_SetExpand(filevar, basename); + Global_Set(dirvar, dirname.str); + Global_Set(filevar, basename); DEBUG5(PARSE, "%s: ${%s} = `%s' ${%s} = `%s'\n", __func__, dirvar, dirname.str, filevar, basename); FStr_Done(&dirname); } /* * Return the immediately including file. * * This is made complicated since the .for loop is implemented as a special * kind of .include; see For_Run. */ static const char * GetActuallyIncludingFile(void) { size_t i; const IFile *incs = GetInclude(0); for (i = includes.len; i >= 2; i--) if (!incs[i - 1].fromForLoop) return incs[i - 2].fname; return NULL; } /* Set .PARSEDIR, .PARSEFILE, .INCLUDEDFROMDIR and .INCLUDEDFROMFILE. */ static void ParseSetParseFile(const char *filename) { const char *including; SetFilenameVars(filename, ".PARSEDIR", ".PARSEFILE"); including = GetActuallyIncludingFile(); if (including != NULL) { SetFilenameVars(including, ".INCLUDEDFROMDIR", ".INCLUDEDFROMFILE"); } else { Global_Delete(".INCLUDEDFROMDIR"); Global_Delete(".INCLUDEDFROMFILE"); } } static bool StrContainsWord(const char *str, const char *word) { size_t strLen = strlen(str); size_t wordLen = strlen(word); const char *p, *end; if (strLen < wordLen) return false; /* str is too short to contain word */ end = str + strLen - wordLen; for (p = str; p != NULL; p = strchr(p, ' ')) { if (*p == ' ') p++; if (p > end) return false; /* cannot contain word */ if (memcmp(p, word, wordLen) == 0 && (p[wordLen] == '\0' || p[wordLen] == ' ')) return true; } return false; } /* * XXX: Searching through a set of words with this linear search is * inefficient for variables that contain thousands of words. * * XXX: The paths in this list don't seem to be normalized in any way. */ static bool VarContainsWord(const char *varname, const char *word) { FStr val = Var_Value(SCOPE_GLOBAL, varname); bool found = val.str != NULL && StrContainsWord(val.str, word); FStr_Done(&val); return found; } /* * Track the makefiles we read - so makefiles can set dependencies on them. * Avoid adding anything more than once. * * Time complexity: O(n) per call, in total O(n^2), where n is the number * of makefiles that have been loaded. */ static void ParseTrackInput(const char *name) { if (!VarContainsWord(MAKE_MAKEFILES, name)) Global_Append(MAKE_MAKEFILES, name); } /* * Start parsing from the given source. * * The given file is added to the includes stack. */ void -Parse_SetInput(const char *name, int lineno, int fd, +Parse_PushInput(const char *name, int lineno, int fd, ReadMoreProc readMore, void *readMoreArg) { IFile *curFile; char *buf; size_t len; bool fromForLoop = name == NULL; if (fromForLoop) name = CurFile()->fname; else ParseTrackInput(name); - DEBUG3(PARSE, "Parse_SetInput: %s %s, line %d\n", + DEBUG3(PARSE, "Parse_PushInput: %s %s, line %d\n", readMore == loadedfile_readMore ? "file" : ".for loop in", name, lineno); if (fd == -1 && readMore == NULL) /* sanity */ return; curFile = Vector_Push(&includes); curFile->fname = bmake_strdup(name); curFile->fromForLoop = fromForLoop; curFile->lineno = lineno; curFile->first_lineno = lineno; curFile->readMore = readMore; curFile->readMoreArg = readMoreArg; curFile->lf = NULL; curFile->depending = doing_depend; /* restore this on EOF */ assert(readMore != NULL); /* Get first block of input data */ buf = curFile->readMore(curFile->readMoreArg, &len); if (buf == NULL) { /* Was all a waste of time ... */ if (curFile->fname != NULL) free(curFile->fname); free(curFile); return; } curFile->buf_freeIt = buf; curFile->buf_ptr = buf; curFile->buf_end = buf + len; curFile->cond_depth = Cond_save_depth(); ParseSetParseFile(name); } /* Check if the directive is an include directive. */ static bool IsInclude(const char *dir, bool sysv) { if (dir[0] == 's' || dir[0] == '-' || (dir[0] == 'd' && !sysv)) dir++; if (strncmp(dir, "include", 7) != 0) return false; /* Space is not mandatory for BSD .include */ return !sysv || ch_isspace(dir[7]); } #ifdef SYSVINCLUDE /* Check if the line is a SYSV include directive. */ static bool IsSysVInclude(const char *line) { const char *p; if (!IsInclude(line, true)) return false; /* Avoid interpreting a dependency line as an include */ for (p = line; (p = strchr(p, ':')) != NULL;) { /* end of line -> it's a dependency */ if (*++p == '\0') return false; /* '::' operator or ': ' -> it's a dependency */ if (*p == ':' || ch_isspace(*p)) return false; } return true; } /* Push to another file. The line points to the word "include". */ static void ParseTraditionalInclude(char *line) { char *cp; /* current position in file spec */ bool done = false; bool silent = line[0] != 'i'; char *file = line + (silent ? 8 : 7); char *all_files; DEBUG2(PARSE, "%s: %s\n", __func__, file); pp_skip_whitespace(&file); /* * Substitute for any variables in the file name before trying to * find the thing. */ (void)Var_Subst(file, SCOPE_CMDLINE, VARE_WANTRES, &all_files); /* TODO: handle errors */ if (*file == '\0') { Parse_Error(PARSE_FATAL, "Filename missing from \"include\""); goto out; } for (file = all_files; !done; file = cp + 1) { /* Skip to end of line or next whitespace */ for (cp = file; *cp != '\0' && !ch_isspace(*cp); cp++) continue; if (*cp != '\0') *cp = '\0'; else done = true; IncludeFile(file, false, false, silent); } out: free(all_files); } #endif #ifdef GMAKEEXPORT /* Parse "export =", and actually export it. */ static void ParseGmakeExport(char *line) { char *variable = line + 6; char *value; DEBUG2(PARSE, "%s: %s\n", __func__, variable); pp_skip_whitespace(&variable); for (value = variable; *value != '\0' && *value != '='; value++) continue; if (*value != '=') { Parse_Error(PARSE_FATAL, "Variable/Value missing from \"export\""); return; } *value++ = '\0'; /* terminate variable */ /* * Expand the value before putting it in the environment. */ (void)Var_Subst(value, SCOPE_CMDLINE, VARE_WANTRES, &value); /* TODO: handle errors */ setenv(variable, value, 1); free(value); } #endif /* * Called when EOF is reached in the current file. If we were reading an * include file or a .for loop, the includes stack is popped and things set * up to go back to reading the previous file at the previous location. * * Results: * true to continue parsing, i.e. it had only reached the end of an * included file, false if the main file has been parsed completely. */ static bool ParseEOF(void) { char *ptr; size_t len; IFile *curFile = CurFile(); assert(curFile->readMore != NULL); doing_depend = curFile->depending; /* restore this */ /* get next input buffer, if any */ ptr = curFile->readMore(curFile->readMoreArg, &len); curFile->buf_ptr = ptr; curFile->buf_freeIt = ptr; curFile->buf_end = ptr == NULL ? NULL : ptr + len; curFile->lineno = curFile->first_lineno; if (ptr != NULL) return true; /* Iterate again */ /* Ensure the makefile (or loop) didn't have mismatched conditionals */ Cond_restore_depth(curFile->cond_depth); if (curFile->lf != NULL) { loadedfile_destroy(curFile->lf); curFile->lf = NULL; } /* Dispose of curFile info */ /* Leak curFile->fname because all the GNodes have pointers to it. */ free(curFile->buf_freeIt); Vector_Pop(&includes); if (includes.len == 0) { /* We've run out of input */ Global_Delete(".PARSEDIR"); Global_Delete(".PARSEFILE"); Global_Delete(".INCLUDEDFROMDIR"); Global_Delete(".INCLUDEDFROMFILE"); return false; } curFile = CurFile(); DEBUG2(PARSE, "ParseEOF: returning to file %s, line %d\n", curFile->fname, curFile->lineno); ParseSetParseFile(curFile->fname); return true; } typedef enum ParseRawLineResult { PRLR_LINE, PRLR_EOF, PRLR_ERROR } ParseRawLineResult; /* * Parse until the end of a line, taking into account lines that end with - * backslash-newline. + * backslash-newline. The resulting line goes from out_line to out_line_end; + * the line is not null-terminated. */ static ParseRawLineResult ParseRawLine(IFile *curFile, char **out_line, char **out_line_end, char **out_firstBackslash, char **out_firstComment) { char *line = curFile->buf_ptr; + char *buf_end = curFile->buf_end; char *p = line; char *line_end = line; char *firstBackslash = NULL; char *firstComment = NULL; ParseRawLineResult res = PRLR_LINE; curFile->lineno++; for (;;) { char ch; - if (p == curFile->buf_end) { + if (p == buf_end) { res = PRLR_EOF; break; } ch = *p; if (ch == '\0' || - (ch == '\\' && p + 1 < curFile->buf_end && p[1] == '\0')) { + (ch == '\\' && p + 1 < buf_end && p[1] == '\0')) { Parse_Error(PARSE_FATAL, "Zero byte read from file"); return PRLR_ERROR; } /* Treat next character after '\' as literal. */ if (ch == '\\') { if (firstBackslash == NULL) firstBackslash = p; if (p[1] == '\n') { curFile->lineno++; - if (p + 2 == curFile->buf_end) { + if (p + 2 == buf_end) { line_end = p; *line_end = '\n'; p += 2; continue; } } p += 2; line_end = p; - assert(p <= curFile->buf_end); + assert(p <= buf_end); continue; } /* * Remember the first '#' for comment stripping, unless * the previous char was '[', as in the modifier ':[#]'. */ if (ch == '#' && firstComment == NULL && !(p > line && p[-1] == '[')) firstComment = line_end; p++; if (ch == '\n') break; /* We are not interested in trailing whitespace. */ if (!ch_isspace(ch)) line_end = p; } *out_line = line; curFile->buf_ptr = p; *out_line_end = line_end; *out_firstBackslash = firstBackslash; *out_firstComment = firstComment; return res; } /* * Beginning at start, unescape '\#' to '#' and replace backslash-newline * with a single space. */ static void UnescapeBackslash(char *line, char *start) { char *src = start; char *dst = start; char *spaceStart = line; for (;;) { char ch = *src++; if (ch != '\\') { if (ch == '\0') break; *dst++ = ch; continue; } ch = *src++; if (ch == '\0') { /* Delete '\\' at end of buffer */ dst--; break; } /* Delete '\\' from before '#' on non-command lines */ if (ch == '#' && line[0] != '\t') { *dst++ = ch; continue; } if (ch != '\n') { /* Leave '\\' in buffer for later */ *dst++ = '\\'; /* * Make sure we don't delete an escaped ' ' from the * line end. */ spaceStart = dst + 1; *dst++ = ch; continue; } /* * Escaped '\n' -- replace following whitespace with a single * ' '. */ pp_skip_hspace(&src); *dst++ = ' '; } /* Delete any trailing spaces - eg from empty continuations */ while (dst > spaceStart && ch_isspace(dst[-1])) dst--; *dst = '\0'; } typedef enum GetLineMode { /* * Return the next line that is neither empty nor a comment. * Backslash line continuations are folded into a single space. * A trailing comment, if any, is discarded. */ GLM_NONEMPTY, /* * Return the next line, even if it is empty or a comment. * Preserve backslash-newline to keep the line numbers correct. * * Used in .for loops to collect the body of the loop while waiting * for the corresponding .endfor. */ GLM_FOR_BODY, /* * Return the next line that starts with a dot. * Backslash line continuations are folded into a single space. * A trailing comment, if any, is discarded. * * Used in .if directives to skip over irrelevant branches while * waiting for the corresponding .endif. */ GLM_DOT } GetLineMode; /* Return the next "interesting" logical line from the current file. */ static char * ParseGetLine(GetLineMode mode) { IFile *curFile = CurFile(); char *line; char *line_end; char *firstBackslash; char *firstComment; for (;;) { ParseRawLineResult res = ParseRawLine(curFile, &line, &line_end, &firstBackslash, &firstComment); if (res == PRLR_ERROR) return NULL; if (line_end == line || firstComment == line) { if (res == PRLR_EOF) return NULL; if (mode != GLM_FOR_BODY) continue; } /* We now have a line of data */ assert(ch_isspace(*line_end)); *line_end = '\0'; if (mode == GLM_FOR_BODY) return line; /* Don't join the physical lines. */ if (mode == GLM_DOT && line[0] != '.') continue; break; } /* Brutally ignore anything after a non-escaped '#' in non-commands. */ if (firstComment != NULL && line[0] != '\t') *firstComment = '\0'; /* If we didn't see a '\\' then the in-situ data is fine. */ if (firstBackslash == NULL) return line; /* Remove escapes from '\n' and '#' */ UnescapeBackslash(line, firstBackslash); return line; } static bool ParseSkippedBranches(void) { char *line; while ((line = ParseGetLine(GLM_DOT)) != NULL) { if (Cond_EvalLine(line) == COND_PARSE) break; /* * TODO: Check for typos in .elif directives * such as .elsif or .elseif. * * This check will probably duplicate some of * the code in ParseLine. Most of the code * there cannot apply, only ParseVarassign and * ParseDependencyLine can, and to prevent code * duplication, these would need to be called * with a flag called onlyCheckSyntax. * * See directive-elif.mk for details. */ } return line != NULL; } static bool ParseForLoop(const char *line) { int rval; int firstLineno; rval = For_Eval(line); if (rval == 0) return false; /* Not a .for line */ if (rval < 0) return true; /* Syntax error - error printed, ignore line */ firstLineno = CurFile()->lineno; /* Accumulate loop lines until matching .endfor */ do { line = ParseGetLine(GLM_FOR_BODY); if (line == NULL) { Parse_Error(PARSE_FATAL, - "Unexpected end of file in for loop."); + "Unexpected end of file in .for loop"); break; } } while (For_Accum(line)); For_Run(firstLineno); /* Stash each iteration as a new 'input file' */ return true; /* Read next line from for-loop buffer */ } /* * Read an entire line from the input file. * * Empty lines, .if and .for are completely handled by this function, * leaving only variable assignments, other directives, dependency lines * and shell commands to the caller. * * Results: * A line without its newline and without any trailing whitespace, * or NULL. */ static char * ParseReadLine(void) { char *line; for (;;) { line = ParseGetLine(GLM_NONEMPTY); if (line == NULL) return NULL; if (line[0] != '.') return line; /* * The line might be a conditional. Ask the conditional module * about it and act accordingly */ switch (Cond_EvalLine(line)) { case COND_SKIP: if (!ParseSkippedBranches()) return NULL; continue; case COND_PARSE: continue; case COND_INVALID: /* Not a conditional line */ if (ParseForLoop(line)) continue; break; } return line; } } static void FinishDependencyGroup(void) { GNodeListNode *ln; if (targets == NULL) return; for (ln = targets->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; Suff_EndTransform(gn); /* * Mark the target as already having commands if it does, to * keep from having shell commands on multiple dependency * lines. */ if (!Lst_IsEmpty(&gn->commands)) gn->type |= OP_HAS_COMMANDS; } Lst_Free(targets); targets = NULL; } /* Add the command to each target from the current dependency spec. */ static void ParseLine_ShellCommand(const char *p) { cpp_skip_whitespace(&p); if (*p == '\0') return; /* skip empty commands */ if (targets == NULL) { Parse_Error(PARSE_FATAL, "Unassociated shell command \"%s\"", p); return; } { char *cmd = bmake_strdup(p); GNodeListNode *ln; for (ln = targets->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; ParseAddCmd(gn, cmd); } #ifdef CLEANUP Lst_Append(&targCmds, cmd); #endif } } -MAKE_INLINE bool -IsDirective(const char *dir, size_t dirlen, const char *name) -{ - return dirlen == strlen(name) && memcmp(dir, name, dirlen) == 0; -} - /* * See if the line starts with one of the known directives, and if so, handle * the directive. */ static bool ParseDirective(char *line) { char *cp = line + 1; - const char *dir, *arg; - size_t dirlen; + const char *arg; + Substring dir; pp_skip_whitespace(&cp); if (IsInclude(cp, false)) { ParseInclude(cp); return true; } - dir = cp; + dir.start = cp; while (ch_isalpha(*cp) || *cp == '-') cp++; - dirlen = (size_t)(cp - dir); + dir.end = cp; if (*cp != '\0' && !ch_isspace(*cp)) return false; pp_skip_whitespace(&cp); arg = cp; - if (IsDirective(dir, dirlen, "undef")) { - Var_Undef(cp); + if (Substring_Equals(dir, "undef")) { + Var_Undef(arg); return true; - } else if (IsDirective(dir, dirlen, "export")) { + } else if (Substring_Equals(dir, "export")) { Var_Export(VEM_PLAIN, arg); return true; - } else if (IsDirective(dir, dirlen, "export-env")) { + } else if (Substring_Equals(dir, "export-env")) { Var_Export(VEM_ENV, arg); return true; - } else if (IsDirective(dir, dirlen, "export-literal")) { + } else if (Substring_Equals(dir, "export-literal")) { Var_Export(VEM_LITERAL, arg); return true; - } else if (IsDirective(dir, dirlen, "unexport")) { + } else if (Substring_Equals(dir, "unexport")) { Var_UnExport(false, arg); return true; - } else if (IsDirective(dir, dirlen, "unexport-env")) { + } else if (Substring_Equals(dir, "unexport-env")) { Var_UnExport(true, arg); return true; - } else if (IsDirective(dir, dirlen, "info")) { + } else if (Substring_Equals(dir, "info")) { ParseMessage(PARSE_INFO, "info", arg); return true; - } else if (IsDirective(dir, dirlen, "warning")) { + } else if (Substring_Equals(dir, "warning")) { ParseMessage(PARSE_WARNING, "warning", arg); return true; - } else if (IsDirective(dir, dirlen, "error")) { + } else if (Substring_Equals(dir, "error")) { ParseMessage(PARSE_FATAL, "error", arg); return true; } return false; } static bool ParseVarassign(const char *line) { VarAssign var; if (!Parse_IsVar(line, &var)) return false; FinishDependencyGroup(); Parse_Var(&var, SCOPE_GLOBAL); return true; } static char * FindSemicolon(char *p) { int level = 0; for (; *p != '\0'; p++) { if (*p == '\\' && p[1] != '\0') { p++; continue; } if (*p == '$' && (p[1] == '(' || p[1] == '{')) level++; else if (level > 0 && (*p == ')' || *p == '}')) level--; else if (level == 0 && *p == ';') break; } return p; } /* * dependency -> target... op [source...] [';' command] * op -> ':' | '::' | '!' */ static void ParseDependencyLine(char *line) { VarEvalMode emode; char *expanded_line; const char *shellcmd = NULL; /* * For some reason - probably to make the parser impossible - * a ';' can be used to separate commands from dependencies. * Attempt to avoid ';' inside substitution patterns. */ { char *semicolon = FindSemicolon(line); if (*semicolon != '\0') { /* Terminate the dependency list at the ';' */ *semicolon = '\0'; shellcmd = semicolon + 1; } } /* * We now know it's a dependency line so it needs to have all * variables expanded before being parsed. * * XXX: Ideally the dependency line would first be split into * its left-hand side, dependency operator and right-hand side, * and then each side would be expanded on its own. This would * allow for the left-hand side to allow only defined variables * and to allow variables on the right-hand side to be undefined * as well. * * Parsing the line first would also prevent that targets * generated from variable expressions are interpreted as the * dependency operator, such as in "target${:U\:} middle: source", * in which the middle is interpreted as a source, not a target. */ /* In lint mode, allow undefined variables to appear in * dependency lines. * * Ideally, only the right-hand side would allow undefined * variables since it is common to have optional dependencies. * Having undefined variables on the left-hand side is more * unusual though. Since both sides are expanded in a single * pass, there is not much choice what to do here. * * In normal mode, it does not matter whether undefined * variables are allowed or not since as of 2020-09-14, * Var_Parse does not print any parse errors in such a case. * It simply returns the special empty string var_Error, * which cannot be detected in the result of Var_Subst. */ emode = opts.strict ? VARE_WANTRES : VARE_UNDEFERR; (void)Var_Subst(line, SCOPE_CMDLINE, emode, &expanded_line); /* TODO: handle errors */ /* Need a fresh list for the target nodes */ if (targets != NULL) Lst_Free(targets); targets = Lst_New(); ParseDependency(expanded_line); free(expanded_line); if (shellcmd != NULL) ParseLine_ShellCommand(shellcmd); } static void ParseLine(char *line) { /* * Lines that begin with '.' can be pretty much anything: * - directives like '.include' or '.if', * - suffix rules like '.c.o:', * - dependencies for filenames that start with '.', * - variable assignments like '.tmp=value'. */ if (line[0] == '.' && ParseDirective(line)) return; if (line[0] == '\t') { ParseLine_ShellCommand(line + 1); return; } #ifdef SYSVINCLUDE if (IsSysVInclude(line)) { /* * It's an S3/S5-style "include". */ ParseTraditionalInclude(line); return; } #endif #ifdef GMAKEEXPORT if (strncmp(line, "export", 6) == 0 && ch_isspace(line[6]) && strchr(line, ':') == NULL) { /* * It's a Gmake "export". */ ParseGmakeExport(line); return; } #endif if (ParseVarassign(line)) return; FinishDependencyGroup(); ParseDependencyLine(line); } /* * Parse a top-level makefile, incorporating its content into the global * dependency graph. * * Input: * name The name of the file being read * fd The open file to parse; will be closed at the end */ void Parse_File(const char *name, int fd) { char *line; /* the line we're working on */ struct loadedfile *lf; lf = loadfile(name, fd); assert(targets == NULL); if (name == NULL) name = "(stdin)"; - Parse_SetInput(name, 0, -1, loadedfile_readMore, lf); + Parse_PushInput(name, 0, -1, loadedfile_readMore, lf); CurFile()->lf = lf; do { while ((line = ParseReadLine()) != NULL) { DEBUG2(PARSE, "ParseReadLine (%d): '%s'\n", CurFile()->lineno, line); ParseLine(line); } /* Reached EOF, but it may be just EOF of an include file. */ } while (ParseEOF()); FinishDependencyGroup(); - if (fatals != 0) { + if (parseErrors != 0) { (void)fflush(stdout); (void)fprintf(stderr, "%s: Fatal errors encountered -- cannot continue", progname); PrintOnError(NULL, NULL); exit(1); } } /* Initialize the parsing module. */ void Parse_Init(void) { mainNode = NULL; parseIncPath = SearchPath_New(); sysIncPath = SearchPath_New(); defSysIncPath = SearchPath_New(); Vector_Init(&includes, sizeof(IFile)); } /* Clean up the parsing module. */ void Parse_End(void) { #ifdef CLEANUP Lst_DoneCall(&targCmds, free); assert(targets == NULL); SearchPath_Free(defSysIncPath); SearchPath_Free(sysIncPath); SearchPath_Free(parseIncPath); assert(includes.len == 0); Vector_Done(&includes); #endif } /* * Return a list containing the single main target to create. * If no such target exists, we Punt with an obnoxious error message. */ void Parse_MainName(GNodeList *mainList) { if (mainNode == NULL) Punt("no target to make."); Lst_Append(mainList, mainNode); if (mainNode->type & OP_DOUBLEDEP) Lst_AppendAll(mainList, &mainNode->cohorts); Global_Append(".TARGETS", mainNode->name); } int -Parse_GetFatals(void) +Parse_NumErrors(void) { - return fatals; + return parseErrors; } diff --git a/contrib/bmake/sigact.h b/contrib/bmake/sigact.h new file mode 100644 index 000000000000..1dc04ba2dbdd --- /dev/null +++ b/contrib/bmake/sigact.h @@ -0,0 +1,104 @@ +/* NAME: + * sigact.h - sigaction et al + * + * SYNOPSIS: + * #include "sigact.h" + * + * DESCRIPTION: + * This header is the interface to a fake sigaction(2) + * implementation. It provides a POSIX compliant interface + * to whatever signal handling mechanisms are available. + * It also provides a Signal() function that is implemented + * in terms of sigaction(). + * If not using signal(2) as part of the underlying + * implementation (USE_SIGNAL or USE_SIGMASK), and + * NO_SIGNAL is not defined, it also provides a signal() + * function that calls Signal(). + * + * SEE ALSO: + * sigact.c + */ +/* + * RCSid: + * $Id: sigact.h,v 1.4 2021/10/14 19:39:17 sjg Exp $ + */ +#ifndef _SIGACT_H +#define _SIGACT_H + +#include + +/* + * most modern systems use void for signal handlers but + * not all. + */ +#ifndef SIG_HDLR +# define SIG_HDLR void +#endif + +/* + * if you want to install this header as signal.h, + * modify this to pick up the original signal.h + */ +#ifndef SIGKILL +# include +#endif +#ifndef SIGKILL +# include +#endif + +#ifndef SIG_ERR +# define SIG_ERR (SIG_HDLR (*)())-1 +#endif +#ifndef BADSIG +# define BADSIG SIG_ERR +#endif + +#ifndef SA_NOCLDSTOP +/* we assume we need the fake sigaction */ +/* sa_flags */ +#define SA_NOCLDSTOP 1 /* don't send SIGCHLD on child stop */ +#define SA_RESTART 2 /* re-start I/O */ + +/* sigprocmask flags */ +#define SIG_BLOCK 1 +#define SIG_UNBLOCK 2 +#define SIG_SETMASK 4 + +/* + * this is a bit untidy + */ +#ifdef _SIGSET_T_ +typedef _SIGSET_T_ sigset_t; +#endif + +/* + * POSIX sa_handler should return void, but since we are + * implementing in terms of something else, it may + * be appropriate to use the normal SIG_HDLR return type + */ +struct sigaction +{ + SIG_HDLR (*sa_handler)(); + sigset_t sa_mask; + int sa_flags; +}; + + +int sigaction ( int /*sig*/, const struct sigaction */*act*/, struct sigaction */*oact*/ ); +int sigaddset ( sigset_t */*mask*/, int /*sig*/ ); +int sigdelset ( sigset_t */*mask*/, int /*sig*/ ); +int sigemptyset ( sigset_t */*mask*/ ); +int sigfillset ( sigset_t */*mask*/ ); +int sigismember ( const sigset_t */*mask*/, int /*sig*/ ); +int sigpending ( sigset_t */*set*/ ); +int sigprocmask ( int how, const sigset_t */*set*/, sigset_t */*oset*/ ); +int sigsuspend ( sigset_t */*mask*/ ); + +#ifndef sigmask +# define sigmask(s) (1<<((s)-1) & (32 - 1)) /* convert SIGnum to mask */ +#endif +#if !defined(NSIG) && defined(_NSIG) +# define NSIG _NSIG +#endif +#endif /* ! SA_NOCLDSTOP */ +#endif /* _SIGACT_H */ diff --git a/contrib/bmake/sigaction.c b/contrib/bmake/sigaction.c new file mode 100644 index 000000000000..dc647e7b058f --- /dev/null +++ b/contrib/bmake/sigaction.c @@ -0,0 +1,397 @@ +/* NAME: + * sigact.c - fake sigaction(2) + * + * SYNOPSIS: + * #include "sigact.h" + * + * int sigaction(int sig, struct sigaction *act, + * struct sigaction *oact); + * int sigaddset(sigset_t *mask, int sig); + * int sigdelset(sigset_t *mask, int sig); + * int sigemptyset(sigset_t *mask); + * int sigfillset(sigset_t *mask); + * int sigismember(sigset_t *mask, int sig); + * int sigpending(sigset_t *set); + * int sigprocmask(int how, sigset_t *set, sigset_t *oset); + * int sigsuspend(sigset_t *mask); + * + * SIG_HDLR (*Signal(int sig, SIG_HDLR (*disp)(int)))(int); + * + * DESCRIPTION: + * This is a fake sigaction implementation. It uses + * sigsetmask(2) et al or sigset(2) and friends if + * available, otherwise it just uses signal(2). If it + * thinks sigaction(2) really exists it compiles to "almost" + * nothing. + * + * In any case it provides a Signal() function that is + * implemented in terms of sigaction(). + * If not using signal(2) as part of the underlying + * implementation (USE_SIGNAL or USE_SIGMASK), and + * NO_SIGNAL is not defined, it also provides a signal() + * function that calls Signal(). + * + * The need for all this mucking about is the problems + * caused by mixing various signal handling mechanisms in + * the one process. This module allows for a consistent + * POSIX compliant interface to whatever is actually + * available. + * + * sigaction() allows the caller to examine and/or set the + * action to be associated with a given signal. "act" and + * "oact" are pointers to 'sigaction structs': + *.nf + * + * struct sigaction + * { + * SIG_HDLR (*sa_handler)(); + * sigset_t sa_mask; + * int sa_flags; + * }; + *.fi + * + * SIG_HDLR is normally 'void' in the POSIX implementation + * and for most current systems. On some older UNIX + * systems, signal handlers do not return 'void', so + * this implementation keeps 'sa_handler' inline with the + * hosts normal signal handling conventions. + * 'sa_mask' controls which signals will be blocked while + * the selected signal handler is active. It is not used + * in this implementation. + * 'sa_flags' controls various semantics such as whether + * system calls should be automagically restarted + * (SA_RESTART) etc. It is not used in this + * implementation. + * Either "act" or "oact" may be NULL in which case the + * appropriate operation is skipped. + * + * sigaddset() adds "sig" to the sigset_t pointed to by "mask". + * + * sigdelset() removes "sig" from the sigset_t pointed to + * by "mask". + * + * sigemptyset() makes the sigset_t pointed to by "mask" empty. + * + * sigfillset() makes the sigset_t pointed to by "mask" + * full ie. match all signals. + * + * sigismember() returns true if "sig" is found in "*mask". + * + * sigpending() is supposed to return "set" loaded with the + * set of signals that are blocked and pending for the + * calling process. It does nothing in this impementation. + * + * sigprocmask() is used to examine and/or change the + * signal mask for the calling process. Either "set" or + * "oset" may be NULL in which case the appropriate + * operation is skipped. "how" may be one of SIG_BLOCK, + * SIG_UNBLOCK or SIG_SETMASK. If this package is built + * with USE_SIGNAL, then this routine achieves nothing. + * + * sigsuspend() sets the signal mask to "*mask" and waits + * for a signal to be delivered after which the previous + * mask is restored. + * + * + * RETURN VALUE: + * 0==success, -1==failure + * + * BUGS: + * Since we fake most of this, don't expect fancy usage to + * work. + * + * AUTHOR: + * Simon J. Gerraty + */ +/* COPYRIGHT: + * @(#)Copyright (c) 1992-2021, Simon J. Gerraty + * + * This is free software. It comes with NO WARRANTY. + * Permission to use, modify and distribute this source code + * is granted subject to the following conditions. + * 1/ that that the above copyright notice and this notice + * are preserved in all copies and that due credit be given + * to the author. + * 2/ that any changes to this code are clearly commented + * as such so that the author does get blamed for bugs + * other than his own. + * + * Please send copies of changes and bug-fixes to: + * sjg@crufty.net + * + */ +#ifndef lint +static char *RCSid = "$Id: sigact.c,v 1.8 2021/10/14 19:39:17 sjg Exp $"; +#endif + +#undef _ANSI_SOURCE /* causes problems */ + +#include +#include + +#ifdef HAVE_CONFIG_H +# include "config.h" +# ifdef NO_SIGSET +# undef HAVE_SIGSET +# endif +# ifndef HAVE_SIGACTION +# ifdef HAVE_SIGSETMASK +# define USE_SIGMASK +# else +# ifdef HAVE_SIGSET +# define USE_SIGSET +# else +# define USE_SIGNAL +# endif +# endif +# endif +#endif + +/* + * some systems have a faulty sigaction() implementation! + * Allow us to bypass it. + * Or they may have installed sigact.h as signal.h which is why + * we have SA_NOCLDSTOP defined. + */ +#if !defined(SA_NOCLDSTOP) || defined(_SIGACT_H) || defined(USE_SIGNAL) || defined(USE_SIGSET) || defined(USE_SIGMASK) + +/* + * if we haven't been told, + * try and guess what we should implement with. + */ +#if !defined(USE_SIGSET) && !defined(USE_SIGMASK) && !defined(USE_SIGNAL) +# if defined(sigmask) || defined(BSD) || defined(_BSD) && !defined(BSD41) +# define USE_SIGMASK +# else +# ifndef NO_SIGSET +# define USE_SIGSET +# else +# define USE_SIGNAL +# endif +# endif +#endif +/* + * if we still don't know, we're in trouble + */ +#if !defined(USE_SIGSET) && !defined(USE_SIGMASK) && !defined(USE_SIGNAL) +error must know what to implement with +#endif + +#include "sigact.h" + +/* + * in case signal() has been mapped to our Signal(). + */ +#undef signal + + +int +sigaction(int sig, + const struct sigaction *act, + struct sigaction *oact) +{ + SIG_HDLR(*oldh) (); + + if (act) { +#ifdef USE_SIGSET + oldh = sigset(sig, act->sa_handler); +#else + oldh = signal(sig, act->sa_handler); +#endif + } else { + if (oact) { +#ifdef USE_SIGSET + oldh = sigset(sig, SIG_IGN); +#else + oldh = signal(sig, SIG_IGN); +#endif + if (oldh != SIG_IGN && oldh != SIG_ERR) { +#ifdef USE_SIGSET + (void) sigset(sig, oldh); +#else + (void) signal(sig, oldh); +#endif + } + } + } + if (oact) { + oact->sa_handler = oldh; + } + return 0; /* hey we're faking it */ +} + +#ifndef HAVE_SIGADDSET +int +sigaddset(sigset_t *mask, int sig) +{ + *mask |= sigmask(sig); + return 0; +} + + +int +sigdelset(sigset_t *mask, int sig) +{ + *mask &= ~(sigmask(sig)); + return 0; +} + + +int +sigemptyset(sigset_t *mask) +{ + *mask = 0; + return 0; +} + + +int +sigfillset(sigset_t *mask) +{ + *mask = ~0; + return 0; +} + + +int +sigismember(const sigset_t *mask, int sig) +{ + return ((*mask) & sigmask(sig)); +} +#endif + +#ifndef HAVE_SIGPENDING +int +sigpending(sigset_t *set) +{ + return 0; /* faking it! */ +} +#endif + +#ifndef HAVE_SIGPROCMASK +int +sigprocmask(int how, const sigset_t *set, sigset_t *oset) +{ +#ifdef USE_SIGSET + int i; +#endif + static sigset_t sm; + static int once = 0; + + if (!once) { + /* + * initally we clear sm, + * there after, it represents the last + * thing we did. + */ + once++; +#ifdef USE_SIGMASK + sm = sigblock(0); +#else + sm = 0; +#endif + } + if (oset) + *oset = sm; + if (set) { + switch (how) { + case SIG_BLOCK: + sm |= *set; + break; + case SIG_UNBLOCK: + sm &= ~(*set); + break; + case SIG_SETMASK: + sm = *set; + break; + } +#ifdef USE_SIGMASK + (void) sigsetmask(sm); +#else +#ifdef USE_SIGSET + for (i = 1; i < NSIG; i++) { + if (how == SIG_UNBLOCK) { + if (*set & sigmask(i)) + sigrelse(i); + } else + if (sm & sigmask(i)) { + sighold(i); + } + } +#endif +#endif + } + return 0; +} +#endif + +#ifndef HAVE_SIGSUSPEND +int +sigsuspend(sigset_t *mask) +{ +#ifdef USE_SIGMASK + sigpause(*mask); +#else + int i; + +#ifdef USE_SIGSET + + for (i = 1; i < NSIG; i++) { + if (*mask & sigmask(i)) { + /* not the same sigpause() as above! */ + sigpause(i); + break; + } + } +#else /* signal(2) only */ + SIG_HDLR(*oldh) (); + + /* + * make sure that signals in mask will not + * be ignored. + */ + for (i = 1; i < NSIG; i++) { + if (*mask & sigmask(i)) { + if ((oldh = signal(i, SIG_DFL)) != SIG_ERR && + oldh != SIG_IGN && + oldh != SIG_DFL) + (void) signal(i, oldh); /* restore handler */ + } + } + pause(); /* wait for a signal */ +#endif +#endif + return 0; +} +#endif +#endif /* ! SA_NOCLDSTOP */ + +#if 0 +#if !defined(SIG_HDLR) +#define SIG_HDLR void +#endif +#if !defined(SIG_ERR) +#define SIG_ERR (SIG_HDLR (*)())-1 +#endif + +#if !defined(USE_SIGNAL) && !defined(USE_SIGMASK) && !defined(NO_SIGNAL) +/* + * ensure we avoid signal mayhem + */ + +extern void (*Signal (int sig, void (*handler) (int)))(int); + +SIG_HDLR(*signal(int sig, SIG_HDLR(*handler)(int)) +{ + return (Signal(sig, handler)); +} +#endif +#endif + +/* This lot (for GNU-Emacs) goes at the end of the file. */ +/* + * Local Variables: + * version-control:t + * comment-column:40 + * End: + */ diff --git a/contrib/bmake/str.c b/contrib/bmake/str.c index b4baede4d417..11e7595dd867 100644 --- a/contrib/bmake/str.c +++ b/contrib/bmake/str.c @@ -1,398 +1,397 @@ -/* $NetBSD: str.c,v 1.85 2021/05/30 21:16:54 rillig Exp $ */ +/* $NetBSD: str.c,v 1.86 2021/06/21 16:59:18 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "make.h" /* "@(#)str.c 5.8 (Berkeley) 6/1/90" */ -MAKE_RCSID("$NetBSD: str.c,v 1.85 2021/05/30 21:16:54 rillig Exp $"); +MAKE_RCSID("$NetBSD: str.c,v 1.86 2021/06/21 16:59:18 rillig Exp $"); /* Return the concatenation of s1 and s2, freshly allocated. */ char * str_concat2(const char *s1, const char *s2) { size_t len1 = strlen(s1); size_t len2 = strlen(s2); char *result = bmake_malloc(len1 + len2 + 1); memcpy(result, s1, len1); memcpy(result + len1, s2, len2 + 1); return result; } /* Return the concatenation of s1, s2 and s3, freshly allocated. */ char * str_concat3(const char *s1, const char *s2, const char *s3) { size_t len1 = strlen(s1); size_t len2 = strlen(s2); size_t len3 = strlen(s3); char *result = bmake_malloc(len1 + len2 + len3 + 1); memcpy(result, s1, len1); memcpy(result + len1, s2, len2); memcpy(result + len1 + len2, s3, len3 + 1); return result; } /* * Fracture a string into an array of words (as delineated by tabs or spaces) * taking quotation marks into account. * * If expand is true, quotes are removed and escape sequences such as \r, \t, * etc... are expanded. In this case, return NULL on parse errors. * * Returns the fractured words, which must be freed later using Words_Free, * unless the returned Words.words was NULL. */ SubstringWords Substring_Words(const char *str, bool expand) { size_t str_len; char *words_buf; size_t words_cap; Substring *words; size_t words_len; char inquote; char *word_start; char *word_end; const char *str_p; /* XXX: why only hspace, not whitespace? */ cpp_skip_hspace(&str); /* skip leading space chars. */ /* words_buf holds the words, separated by '\0'. */ str_len = strlen(str); words_buf = bmake_malloc(str_len + 1); words_cap = str_len / 5 > 50 ? str_len / 5 : 50; words = bmake_malloc((words_cap + 1) * sizeof(words[0])); /* * copy the string; at the same time, parse backslashes, * quotes and build the word list. */ words_len = 0; inquote = '\0'; word_start = words_buf; word_end = words_buf; for (str_p = str;; str_p++) { char ch = *str_p; switch (ch) { case '"': case '\'': if (inquote != '\0') { if (inquote == ch) inquote = '\0'; else break; } else { inquote = ch; /* Don't miss "" or '' */ if (word_start == NULL && str_p[1] == inquote) { if (!expand) { word_start = word_end; *word_end++ = ch; } else word_start = word_end + 1; str_p++; inquote = '\0'; break; } } if (!expand) { if (word_start == NULL) word_start = word_end; *word_end++ = ch; } continue; case ' ': case '\t': case '\n': if (inquote != '\0') break; if (word_start == NULL) continue; /* FALLTHROUGH */ case '\0': /* * end of a token -- make sure there's enough words * space and save off a pointer. */ if (word_start == NULL) goto done; *word_end++ = '\0'; if (words_len == words_cap) { - size_t new_size; words_cap *= 2; - new_size = (words_cap + 1) * sizeof(words[0]); - words = bmake_realloc(words, new_size); + words = bmake_realloc(words, + (words_cap + 1) * sizeof(words[0])); } words[words_len++] = Substring_Init(word_start, word_end - 1); word_start = NULL; if (ch == '\n' || ch == '\0') { if (expand && inquote != '\0') { SubstringWords res; free(words); free(words_buf); res.words = NULL; res.len = 0; res.freeIt = NULL; return res; } goto done; } continue; case '\\': if (!expand) { if (word_start == NULL) word_start = word_end; *word_end++ = '\\'; /* catch '\' at end of line */ if (str_p[1] == '\0') continue; ch = *++str_p; break; } switch (ch = *++str_p) { case '\0': case '\n': /* hmmm; fix it up as best we can */ ch = '\\'; str_p--; break; case 'b': ch = '\b'; break; case 'f': ch = '\f'; break; case 'n': ch = '\n'; break; case 'r': ch = '\r'; break; case 't': ch = '\t'; break; } break; } if (word_start == NULL) word_start = word_end; *word_end++ = ch; } done: words[words_len] = Substring_Init(NULL, NULL); /* useful for argv */ { SubstringWords result; result.words = words; result.len = words_len; result.freeIt = words_buf; return result; } } Words Str_Words(const char *str, bool expand) { SubstringWords swords; Words words; size_t i; swords = Substring_Words(str, expand); if (swords.words == NULL) { words.words = NULL; words.len = 0; words.freeIt = NULL; return words; } words.words = bmake_malloc((swords.len + 1) * sizeof(words.words[0])); words.len = swords.len; words.freeIt = swords.freeIt; for (i = 0; i < swords.len + 1; i++) words.words[i] = UNCONST(swords.words[i].start); free(swords.words); return words; } /* * Str_Match -- Test if a string matches a pattern like "*.[ch]". * The following special characters are known *?\[] (as in fnmatch(3)). * * XXX: this function does not detect or report malformed patterns. */ bool Str_Match(const char *str, const char *pat) { for (;;) { /* * See if we're at the end of both the pattern and the * string. If so, we succeeded. If we're at the end of the * pattern but not at the end of the string, we failed. */ if (*pat == '\0') return *str == '\0'; if (*str == '\0' && *pat != '*') return false; /* * A '*' in the pattern matches any substring. We handle this * by calling ourselves for each suffix of the string. */ if (*pat == '*') { pat++; while (*pat == '*') pat++; if (*pat == '\0') return true; while (*str != '\0') { if (Str_Match(str, pat)) return true; str++; } return false; } /* A '?' in the pattern matches any single character. */ if (*pat == '?') goto thisCharOK; /* * A '[' in the pattern matches a character from a list. * The '[' is followed by the list of acceptable characters, * or by ranges (two characters separated by '-'). In these * character lists, the backslash is an ordinary character. */ if (*pat == '[') { bool neg = pat[1] == '^'; pat += neg ? 2 : 1; for (;;) { if (*pat == ']' || *pat == '\0') { if (neg) break; return false; } /* * XXX: This naive comparison makes the * control flow of the pattern parser * dependent on the actual value of the * string. This is unpredictable. It may be * though that the code only looks wrong but * actually all code paths result in the same * behavior. This needs further tests. */ if (*pat == *str) break; if (pat[1] == '-') { if (pat[2] == '\0') return neg; if (*pat <= *str && pat[2] >= *str) break; if (*pat >= *str && pat[2] <= *str) break; pat += 2; } pat++; } if (neg && *pat != ']' && *pat != '\0') return false; while (*pat != ']' && *pat != '\0') pat++; if (*pat == '\0') pat--; goto thisCharOK; } /* * A backslash in the pattern matches the character following * it exactly. */ if (*pat == '\\') { pat++; if (*pat == '\0') return false; } if (*pat != *str) return false; thisCharOK: pat++; str++; } } diff --git a/contrib/bmake/str.h b/contrib/bmake/str.h index ce0bb5ad82bc..bd56a2981785 100644 --- a/contrib/bmake/str.h +++ b/contrib/bmake/str.h @@ -1,366 +1,385 @@ -/* $NetBSD: str.h,v 1.9 2021/05/30 21:16:54 rillig Exp $ */ +/* $NetBSD: str.h,v 1.12 2021/12/12 13:43:47 rillig Exp $ */ /* Copyright (c) 2021 Roland Illig All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * Memory-efficient string handling. */ /* A read-only string that may need to be freed after use. */ typedef struct FStr { const char *str; void *freeIt; } FStr; /* A modifiable string that may need to be freed after use. */ typedef struct MFStr { char *str; void *freeIt; } MFStr; /* A read-only range of a character array, NOT null-terminated. */ typedef struct Substring { const char *start; const char *end; } Substring; /* * Builds a string, only allocating memory if the string is different from the * expected string. */ typedef struct LazyBuf { char *data; size_t len; size_t cap; const char *expected; - void *freeIt; } LazyBuf; /* The result of splitting a string into words. */ typedef struct Words { char **words; size_t len; void *freeIt; } Words; /* The result of splitting a string into words. */ typedef struct SubstringWords { Substring *words; size_t len; void *freeIt; } SubstringWords; MAKE_INLINE FStr FStr_Init(const char *str, void *freeIt) { FStr fstr; fstr.str = str; fstr.freeIt = freeIt; return fstr; } /* Return a string that is the sole owner of str. */ MAKE_INLINE FStr FStr_InitOwn(char *str) { return FStr_Init(str, str); } /* Return a string that refers to the shared str. */ MAKE_INLINE FStr FStr_InitRefer(const char *str) { return FStr_Init(str, NULL); } MAKE_INLINE void FStr_Done(FStr *fstr) { free(fstr->freeIt); #ifdef CLEANUP fstr->str = NULL; fstr->freeIt = NULL; #endif } MAKE_INLINE MFStr MFStr_Init(char *str, void *freeIt) { MFStr mfstr; mfstr.str = str; mfstr.freeIt = freeIt; return mfstr; } /* Return a string that is the sole owner of str. */ MAKE_INLINE MFStr MFStr_InitOwn(char *str) { return MFStr_Init(str, str); } /* Return a string that refers to the shared str. */ MAKE_INLINE MFStr MFStr_InitRefer(char *str) { return MFStr_Init(str, NULL); } MAKE_INLINE void MFStr_Done(MFStr *mfstr) { free(mfstr->freeIt); #ifdef CLEANUP mfstr->str = NULL; mfstr->freeIt = NULL; #endif } MAKE_STATIC Substring Substring_Init(const char *start, const char *end) { Substring sub; sub.start = start; sub.end = end; return sub; } MAKE_INLINE Substring Substring_InitStr(const char *str) { return Substring_Init(str, str + strlen(str)); } MAKE_STATIC size_t Substring_Length(Substring sub) { return (size_t)(sub.end - sub.start); } MAKE_STATIC bool Substring_IsEmpty(Substring sub) { return sub.start == sub.end; } MAKE_INLINE bool Substring_Equals(Substring sub, const char *str) { size_t len = strlen(str); return Substring_Length(sub) == len && memcmp(sub.start, str, len) == 0; } +MAKE_INLINE bool +Substring_Eq(Substring sub, Substring str) +{ + size_t len = Substring_Length(sub); + return len == Substring_Length(str) && + memcmp(sub.start, str.start, len) == 0; +} + MAKE_STATIC Substring Substring_Sub(Substring sub, size_t start, size_t end) { assert(start <= Substring_Length(sub)); assert(end <= Substring_Length(sub)); return Substring_Init(sub.start + start, sub.start + end); } MAKE_STATIC bool Substring_HasPrefix(Substring sub, Substring prefix) { return Substring_Length(sub) >= Substring_Length(prefix) && memcmp(sub.start, prefix.start, Substring_Length(prefix)) == 0; } MAKE_STATIC bool Substring_HasSuffix(Substring sub, Substring suffix) { size_t suffixLen = Substring_Length(suffix); return Substring_Length(sub) >= suffixLen && memcmp(sub.end - suffixLen, suffix.start, suffixLen) == 0; } /* Returns an independent, null-terminated copy of the substring. */ MAKE_STATIC FStr Substring_Str(Substring sub) { if (Substring_IsEmpty(sub)) return FStr_InitRefer(""); return FStr_InitOwn(bmake_strsedup(sub.start, sub.end)); } MAKE_STATIC const char * Substring_SkipFirst(Substring sub, char ch) { const char *p; for (p = sub.start; p != sub.end; p++) if (*p == ch) return p + 1; return sub.start; } MAKE_STATIC const char * Substring_LastIndex(Substring sub, char ch) { const char *p; for (p = sub.end; p != sub.start; p--) if (p[-1] == ch) return p - 1; return NULL; } MAKE_STATIC Substring Substring_Dirname(Substring pathname) { const char *p; for (p = pathname.end; p != pathname.start; p--) if (p[-1] == '/') return Substring_Init(pathname.start, p - 1); return Substring_InitStr("."); } MAKE_STATIC Substring Substring_Basename(Substring pathname) { const char *p; for (p = pathname.end; p != pathname.start; p--) if (p[-1] == '/') return Substring_Init(p, pathname.end); return pathname; } MAKE_STATIC void LazyBuf_Init(LazyBuf *buf, const char *expected) { buf->data = NULL; buf->len = 0; buf->cap = 0; buf->expected = expected; - buf->freeIt = NULL; } MAKE_INLINE void LazyBuf_Done(LazyBuf *buf) { - free(buf->freeIt); + free(buf->data); } MAKE_STATIC void LazyBuf_Add(LazyBuf *buf, char ch) { if (buf->data != NULL) { if (buf->len == buf->cap) { buf->cap *= 2; buf->data = bmake_realloc(buf->data, buf->cap); } buf->data[buf->len++] = ch; } else if (ch == buf->expected[buf->len]) { buf->len++; return; } else { buf->cap = buf->len + 16; buf->data = bmake_malloc(buf->cap); memcpy(buf->data, buf->expected, buf->len); buf->data[buf->len++] = ch; } } MAKE_STATIC void LazyBuf_AddStr(LazyBuf *buf, const char *str) { const char *p; for (p = str; *p != '\0'; p++) LazyBuf_Add(buf, *p); } MAKE_STATIC void LazyBuf_AddBytesBetween(LazyBuf *buf, const char *start, const char *end) { const char *p; for (p = start; p != end; p++) LazyBuf_Add(buf, *p); } MAKE_INLINE void LazyBuf_AddSubstring(LazyBuf *buf, Substring sub) { LazyBuf_AddBytesBetween(buf, sub.start, sub.end); } MAKE_STATIC Substring LazyBuf_Get(const LazyBuf *buf) { const char *start = buf->data != NULL ? buf->data : buf->expected; return Substring_Init(start, start + buf->len); } +/* + * Returns the content of the buffer as a newly allocated string. + * + * See LazyBuf_Get to avoid unnecessary memory allocations. + */ MAKE_STATIC FStr LazyBuf_DoneGet(LazyBuf *buf) { if (buf->data != NULL) { LazyBuf_Add(buf, '\0'); return FStr_InitOwn(buf->data); } return Substring_Str(LazyBuf_Get(buf)); } Words Str_Words(const char *, bool); MAKE_INLINE void Words_Free(Words w) { free(w.words); free(w.freeIt); } SubstringWords Substring_Words(const char *, bool); +MAKE_INLINE void +SubstringWords_Init(SubstringWords *w) +{ + w->words = NULL; + w->len = 0; + w->freeIt = NULL; +} + MAKE_INLINE void SubstringWords_Free(SubstringWords w) { free(w.words); free(w.freeIt); } char *str_concat2(const char *, const char *); char *str_concat3(const char *, const char *, const char *); bool Str_Match(const char *, const char *); diff --git a/contrib/bmake/suff.c b/contrib/bmake/suff.c index b2c926a2b8bc..ab7ac6184173 100644 --- a/contrib/bmake/suff.c +++ b/contrib/bmake/suff.c @@ -1,2179 +1,2196 @@ -/* $NetBSD: suff.c,v 1.350 2021/04/04 10:05:08 rillig Exp $ */ +/* $NetBSD: suff.c,v 1.357 2021/12/12 20:45:48 sjg Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Maintain suffix lists and find implicit dependents using suffix * transformation rules such as ".c.o". * * Interface: * Suff_Init Initialize the module. * * Suff_End Clean up the module. * * Suff_ExtendPaths * Extend the search path of each suffix to include the * default search path. * * Suff_ClearSuffixes * Clear out all the suffixes and transformations. * * Suff_IsTransform * See if the passed string is a transformation rule. * * Suff_AddSuffix Add the passed string as another known suffix. * * Suff_GetPath Return the search path for the given suffix. * * Suff_AddInclude * Mark the given suffix as denoting an include file. * * Suff_AddLib Mark the given suffix as denoting a library. * * Suff_AddTransform * Add another transformation to the suffix graph. * * Suff_SetNull Define the suffix to consider the suffix of * any file that doesn't have a known one. * * Suff_FindDeps Find implicit sources for and the location of * a target based on its suffix. Returns the * bottom-most node added to the graph or NULL * if the target had no implicit sources. * * Suff_FindPath Return the appropriate path to search in order to * find the node. */ #include "make.h" #include "dir.h" /* "@(#)suff.c 8.4 (Berkeley) 3/21/94" */ -MAKE_RCSID("$NetBSD: suff.c,v 1.350 2021/04/04 10:05:08 rillig Exp $"); +MAKE_RCSID("$NetBSD: suff.c,v 1.357 2021/12/12 20:45:48 sjg Exp $"); typedef List SuffixList; typedef ListNode SuffixListNode; typedef List CandidateList; typedef ListNode CandidateListNode; /* The defined suffixes, such as '.c', '.o', '.l'. */ static SuffixList sufflist = LST_INIT; #ifdef CLEANUP /* The suffixes to be cleaned up at the end. */ static SuffixList suffClean = LST_INIT; #endif /* * The transformation rules, such as '.c.o' to transform '.c' into '.o', * or simply '.c' to transform 'file.c' into 'file'. */ static GNodeList transforms = LST_INIT; /* * Counter for assigning suffix numbers. * TODO: What are these suffix numbers used for? */ static int sNum = 0; -typedef enum SuffixFlags { - SUFF_NONE = 0, +typedef List SuffixListList; +/* + * A suffix such as ".c" or ".o" that is used in suffix transformation rules + * such as ".c.o:". + */ +typedef struct Suffix { + /* The suffix itself, such as ".c" */ + char *name; + /* Length of the name, to avoid strlen calls */ + size_t nameLen; /* * This suffix marks include files. Their search path ends up in the * undocumented special variable '.INCLUDES'. */ - SUFF_INCLUDE = 1 << 0, - + bool include:1; /* * This suffix marks library files. Their search path ends up in the * undocumented special variable '.LIBS'. */ - SUFF_LIBRARY = 1 << 1, - + bool library:1; /* * The empty suffix. * * XXX: What is the difference between the empty suffix and the null * suffix? * * XXX: Why is SUFF_NULL needed at all? Wouldn't nameLen == 0 mean * the same? */ - SUFF_NULL = 1 << 2 - -} SuffixFlags; - -ENUM_FLAGS_RTTI_3(SuffixFlags, - SUFF_INCLUDE, SUFF_LIBRARY, SUFF_NULL); - -typedef List SuffixListList; - -/* - * A suffix such as ".c" or ".o" that is used in suffix transformation rules - * such as ".c.o:". - */ -typedef struct Suffix { - /* The suffix itself, such as ".c" */ - char *name; - /* Length of the name, to avoid strlen calls */ - size_t nameLen; - /* Type of suffix */ - SuffixFlags flags; + bool isNull:1; /* The path along which files of this suffix may be found */ SearchPath *searchPath; + /* The suffix number; TODO: document the purpose of this number */ int sNum; /* Reference count of list membership and several other places */ int refCount; + /* Suffixes we have a transformation to */ SuffixList parents; /* Suffixes we have a transformation from */ SuffixList children; - - /* Lists in which this suffix is referenced. + /* + * Lists in which this suffix is referenced. * * XXX: These lists are used nowhere, they are just appended to, for * no apparent reason. They do have the side effect of increasing - * refCount though. */ + * refCount though. + */ SuffixListList ref; } Suffix; /* * A candidate when searching for implied sources. * * For example, when "src.o" is to be made, a typical candidate is "src.c" * via the transformation rule ".c.o". If that doesn't exist, maybe there is * another transformation rule ".pas.c" that would make "src.pas" an indirect * candidate as well. The first such chain that leads to an existing file or * node is finally chosen to be made. */ typedef struct Candidate { /* The file or node to look for. */ char *file; /* The prefix from which file was formed. * Its memory is shared among all candidates. */ char *prefix; /* The suffix on the file. */ Suffix *suff; /* The candidate that can be made from this, * or NULL for the top-level candidate. */ struct Candidate *parent; /* The node describing the file. */ GNode *node; /* Count of existing children, only used for memory management, so we * don't free this candidate too early or too late. */ int numChildren; #ifdef DEBUG_SRC CandidateList childrenList; #endif } Candidate; typedef struct CandidateSearcher { CandidateList list; /* * TODO: Add HashSet for seen entries, to avoid endless loops such as * in suff-transform-endless.mk. */ } CandidateSearcher; /* TODO: Document the difference between nullSuff and emptySuff. */ /* The NULL suffix for this run */ static Suffix *nullSuff; /* The empty suffix required for POSIX single-suffix transformation rules */ static Suffix *emptySuff; static Suffix * Suffix_Ref(Suffix *suff) { suff->refCount++; return suff; } /* Change the value of a Suffix variable, adjusting the reference counts. */ static void Suffix_Reassign(Suffix **var, Suffix *suff) { if (*var != NULL) (*var)->refCount--; *var = suff; suff->refCount++; } /* Set a Suffix variable to NULL, adjusting the reference count. */ static void Suffix_Unassign(Suffix **var) { if (*var != NULL) (*var)->refCount--; *var = NULL; } /* * See if pref is a prefix of str. * Return NULL if it ain't, pointer to character in str after prefix if so. */ static const char * StrTrimPrefix(const char *pref, const char *str) { while (*str != '\0' && *pref == *str) { pref++; str++; } return *pref != '\0' ? NULL : str; } /* * See if suff is a suffix of str, and if so, return the pointer to the suffix * in str, which at the same time marks the end of the prefix. */ static const char * StrTrimSuffix(const char *str, size_t strLen, const char *suff, size_t suffLen) { const char *suffInStr; size_t i; if (strLen < suffLen) return NULL; suffInStr = str + strLen - suffLen; for (i = 0; i < suffLen; i++) if (suff[i] != suffInStr[i]) return NULL; return suffInStr; } /* * See if suff is a suffix of name, and if so, return the end of the prefix * in name. */ static const char * Suffix_TrimSuffix(const Suffix *suff, size_t nameLen, const char *nameEnd) { return StrTrimSuffix(nameEnd - nameLen, nameLen, suff->name, suff->nameLen); } static bool Suffix_IsSuffix(const Suffix *suff, size_t nameLen, const char *nameEnd) { return Suffix_TrimSuffix(suff, nameLen, nameEnd) != NULL; } static Suffix * FindSuffixByNameLen(const char *name, size_t nameLen) { SuffixListNode *ln; for (ln = sufflist.first; ln != NULL; ln = ln->next) { Suffix *suff = ln->datum; if (suff->nameLen == nameLen && memcmp(suff->name, name, nameLen) == 0) return suff; } return NULL; } static Suffix * FindSuffixByName(const char *name) { return FindSuffixByNameLen(name, strlen(name)); } static GNode * FindTransformByName(const char *name) { GNodeListNode *ln; for (ln = transforms.first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; if (strcmp(gn->name, name) == 0) return gn; } return NULL; } static void SuffixList_Unref(SuffixList *list, Suffix *suff) { SuffixListNode *ln = Lst_FindDatum(list, suff); if (ln != NULL) { Lst_Remove(list, ln); suff->refCount--; } } /* Free up all memory associated with the given suffix structure. */ static void Suffix_Free(Suffix *suff) { if (suff == nullSuff) nullSuff = NULL; if (suff == emptySuff) emptySuff = NULL; #if 0 /* We don't delete suffixes in order, so we cannot use this */ if (suff->refCount != 0) Punt("Internal error deleting suffix `%s' with refcount = %d", suff->name, suff->refCount); #endif Lst_Done(&suff->ref); Lst_Done(&suff->children); Lst_Done(&suff->parents); SearchPath_Free(suff->searchPath); free(suff->name); free(suff); } static void SuffFree(void *p) { Suffix_Free(p); } /* Remove the suffix from the list, and free if it is otherwise unused. */ static void SuffixList_Remove(SuffixList *list, Suffix *suff) { SuffixList_Unref(list, suff); if (suff->refCount == 0) { /* XXX: can lead to suff->refCount == -1 */ SuffixList_Unref(&sufflist, suff); DEBUG1(SUFF, "Removing suffix \"%s\"\n", suff->name); SuffFree(suff); } } /* * Insert the suffix into the list, keeping the list ordered by suffix * number. */ static void SuffixList_Insert(SuffixList *list, Suffix *suff) { SuffixListNode *ln; Suffix *listSuff = NULL; for (ln = list->first; ln != NULL; ln = ln->next) { listSuff = ln->datum; if (listSuff->sNum >= suff->sNum) break; } if (ln == NULL) { DEBUG2(SUFF, "inserting \"%s\" (%d) at end of list\n", suff->name, suff->sNum); Lst_Append(list, Suffix_Ref(suff)); Lst_Append(&suff->ref, list); } else if (listSuff->sNum != suff->sNum) { DEBUG4(SUFF, "inserting \"%s\" (%d) before \"%s\" (%d)\n", suff->name, suff->sNum, listSuff->name, listSuff->sNum); Lst_InsertBefore(list, ln, Suffix_Ref(suff)); Lst_Append(&suff->ref, list); } else { DEBUG2(SUFF, "\"%s\" (%d) is already there\n", suff->name, suff->sNum); } } static void Relate(Suffix *srcSuff, Suffix *targSuff) { SuffixList_Insert(&targSuff->children, srcSuff); SuffixList_Insert(&srcSuff->parents, targSuff); } static Suffix * Suffix_New(const char *name) { Suffix *suff = bmake_malloc(sizeof *suff); suff->name = bmake_strdup(name); suff->nameLen = strlen(suff->name); suff->searchPath = SearchPath_New(); Lst_Init(&suff->children); Lst_Init(&suff->parents); Lst_Init(&suff->ref); suff->sNum = sNum++; - suff->flags = SUFF_NONE; + suff->include = false; + suff->library = false; + suff->isNull = false; suff->refCount = 1; /* XXX: why 1? It's not assigned anywhere yet. */ return suff; } /* * Nuke the list of suffixes but keep all transformation rules around. The * transformation graph is destroyed in this process, but we leave the list * of rules so when a new graph is formed, the rules will remain. This * function is called when a line '.SUFFIXES:' with an empty suffixes list is * encountered in a makefile. */ void Suff_ClearSuffixes(void) { #ifdef CLEANUP Lst_MoveAll(&suffClean, &sufflist); #endif DEBUG0(SUFF, "Clearing all suffixes\n"); Lst_Init(&sufflist); sNum = 0; if (nullSuff != NULL) SuffFree(nullSuff); emptySuff = nullSuff = Suffix_New(""); SearchPath_AddAll(nullSuff->searchPath, &dirSearchPath); - nullSuff->flags = SUFF_NULL; + nullSuff->include = false; + nullSuff->library = false; + nullSuff->isNull = true; } /* * Parse a transformation string such as ".c.o" to find its two component * suffixes (the source ".c" and the target ".o"). If there are no such * suffixes, try a single-suffix transformation as well. * * Return true if the string is a valid transformation. */ static bool ParseTransform(const char *str, Suffix **out_src, Suffix **out_targ) { SuffixListNode *ln; Suffix *single = NULL; /* * Loop looking first for a suffix that matches the start of the * string and then for one that exactly matches the rest of it. If * we can find two that meet these criteria, we've successfully * parsed the string. */ for (ln = sufflist.first; ln != NULL; ln = ln->next) { Suffix *src = ln->datum; if (StrTrimPrefix(src->name, str) == NULL) continue; if (str[src->nameLen] == '\0') { single = src; } else { Suffix *targ = FindSuffixByName(str + src->nameLen); if (targ != NULL) { *out_src = src; *out_targ = targ; return true; } } } if (single != NULL) { /* * There was a suffix that encompassed the entire string, so we * assume it was a transformation to the null suffix (thank you * POSIX; search for "single suffix" or "single-suffix"). * * We still prefer to find a double rule over a singleton, * hence we leave this check until the end. * * XXX: Use emptySuff over nullSuff? */ *out_src = single; *out_targ = nullSuff; return true; } return false; } /* * Return true if the given string is a transformation rule, that is, a * concatenation of two known suffixes such as ".c.o" or a single suffix * such as ".o". */ bool Suff_IsTransform(const char *str) { Suffix *src, *targ; return ParseTransform(str, &src, &targ); } /* * Add the transformation rule to the list of rules and place the * transformation itself in the graph. * * The transformation is linked to the two suffixes mentioned in the name. * * Input: * name must have the form ".from.to" or just ".from" * * Results: * The created or existing transformation node in the transforms list */ GNode * Suff_AddTransform(const char *name) { Suffix *srcSuff; Suffix *targSuff; GNode *gn = FindTransformByName(name); if (gn == NULL) { /* * Make a new graph node for the transformation. It will be * filled in by the Parse module. */ gn = GNode_New(name); Lst_Append(&transforms, gn); } else { /* * New specification for transformation rule. Just nuke the * old list of commands so they can be filled in again. We * don't actually free the commands themselves, because a * given command can be attached to several different * transformations. */ Lst_Done(&gn->commands); Lst_Init(&gn->commands); Lst_Done(&gn->children); Lst_Init(&gn->children); } gn->type = OP_TRANSFORM; { /* TODO: Avoid the redundant parsing here. */ bool ok = ParseTransform(name, &srcSuff, &targSuff); assert(ok); + /* LINTED 129 *//* expression has null effect */ (void)ok; } /* Link the two together in the proper relationship and order. */ DEBUG2(SUFF, "defining transformation from `%s' to `%s'\n", srcSuff->name, targSuff->name); Relate(srcSuff, targSuff); return gn; } /* * Handle the finish of a transformation definition, removing the * transformation from the graph if it has neither commands nor sources. * * If the node has no commands or children, the children and parents lists * of the affected suffixes are altered. * * Input: * gn Node for transformation */ void Suff_EndTransform(GNode *gn) { Suffix *srcSuff, *targSuff; SuffixList *srcSuffParents; if ((gn->type & OP_DOUBLEDEP) && !Lst_IsEmpty(&gn->cohorts)) gn = gn->cohorts.last->datum; if (!(gn->type & OP_TRANSFORM)) return; if (!Lst_IsEmpty(&gn->commands) || !Lst_IsEmpty(&gn->children)) { DEBUG1(SUFF, "transformation %s complete\n", gn->name); return; } /* * SuffParseTransform() may fail for special rules which are not * actual transformation rules. (e.g. .DEFAULT) */ if (!ParseTransform(gn->name, &srcSuff, &targSuff)) return; DEBUG2(SUFF, "deleting incomplete transformation from `%s' to `%s'\n", srcSuff->name, targSuff->name); /* * Remember the parents since srcSuff could be deleted in * SuffixList_Remove. */ srcSuffParents = &srcSuff->parents; SuffixList_Remove(&targSuff->children, srcSuff); SuffixList_Remove(srcSuffParents, targSuff); } /* * Called from Suff_AddSuffix to search through the list of * existing transformation rules and rebuild the transformation graph when * it has been destroyed by Suff_ClearSuffixes. If the given rule is a * transformation involving this suffix and another, existing suffix, the * proper relationship is established between the two. * * The appropriate links will be made between this suffix and others if * transformation rules exist for it. * * Input: * transform Transformation to test * suff Suffix to rebuild */ static void RebuildGraph(GNode *transform, Suffix *suff) { const char *name = transform->name; size_t nameLen = strlen(name); const char *toName; /* See if it is a transformation from this suffix to another suffix. */ toName = StrTrimPrefix(suff->name, name); if (toName != NULL) { Suffix *to = FindSuffixByName(toName); if (to != NULL) { Relate(suff, to); return; } } /* See if it is a transformation from another suffix to this suffix. */ toName = Suffix_TrimSuffix(suff, nameLen, name + nameLen); if (toName != NULL) { Suffix *from = FindSuffixByNameLen(name, (size_t)(toName - name)); if (from != NULL) Relate(from, suff); } } /* * During Suff_AddSuffix, search through the list of existing targets and find * if any of the existing targets can be turned into a transformation rule. * * If such a target is found and the target is the current main target, the * main target is set to NULL and the next target examined (if that exists) * becomes the main target. * * Results: * true iff a new main target has been selected. */ static bool UpdateTarget(GNode *target, GNode **inout_main, Suffix *suff, bool *inout_removedMain) { Suffix *srcSuff, *targSuff; char *ptr; if (*inout_main == NULL && *inout_removedMain && !(target->type & OP_NOTARGET)) { DEBUG1(MAKE, "Setting main node to \"%s\"\n", target->name); *inout_main = target; Targ_SetMain(target); /* * XXX: Why could it be a good idea to return true here? * The main task of this function is to turn ordinary nodes * into transformations, no matter whether or not a new .MAIN * node has been found. */ /* * XXX: Even when changing this to false, none of the existing * unit tests fails. */ return true; } if (target->type == OP_TRANSFORM) return false; /* * XXX: What about a transformation ".cpp.c"? If ".c" is added as * a new suffix, it seems wrong that this transformation would be * skipped just because ".c" happens to be a prefix of ".cpp". */ ptr = strstr(target->name, suff->name); if (ptr == NULL) return false; /* * XXX: In suff-rebuild.mk, in the line '.SUFFIXES: .c .b .a', this * condition prevents the rule '.b.c' from being added again during * Suff_AddSuffix(".b"). * * XXX: Removing this paragraph makes suff-add-later.mk use massive * amounts of memory. */ if (ptr == target->name) return false; if (ParseTransform(target->name, &srcSuff, &targSuff)) { if (*inout_main == target) { DEBUG1(MAKE, "Setting main node from \"%s\" back to null\n", target->name); *inout_removedMain = true; *inout_main = NULL; Targ_SetMain(NULL); } Lst_Done(&target->children); Lst_Init(&target->children); target->type = OP_TRANSFORM; /* * Link the two together in the proper relationship and order. */ DEBUG2(SUFF, "defining transformation from `%s' to `%s'\n", srcSuff->name, targSuff->name); Relate(srcSuff, targSuff); } return false; } /* * Look at all existing targets to see if adding this suffix will make one * of the current targets mutate into a suffix rule. * * This is ugly, but other makes treat all targets that start with a '.' as * suffix rules. */ static void UpdateTargets(GNode **inout_main, Suffix *suff) { bool removedMain = false; GNodeListNode *ln; for (ln = Targ_List()->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; if (UpdateTarget(gn, inout_main, suff, &removedMain)) break; } } /* * Add the suffix to the end of the list of known suffixes. * Should we restructure the suffix graph? Make doesn't. * * A GNode is created for the suffix (XXX: this sounds completely wrong) and * a Suffix structure is created and added to the suffixes list unless the * suffix was already known. * The mainNode passed can be modified if a target mutated into a * transform and that target happened to be the main target. * * Input: * name the name of the suffix to add */ void Suff_AddSuffix(const char *name, GNode **inout_main) { GNodeListNode *ln; Suffix *suff = FindSuffixByName(name); if (suff != NULL) return; suff = Suffix_New(name); Lst_Append(&sufflist, suff); DEBUG1(SUFF, "Adding suffix \"%s\"\n", suff->name); UpdateTargets(inout_main, suff); /* * Look for any existing transformations from or to this suffix. * XXX: Only do this after a Suff_ClearSuffixes? */ for (ln = transforms.first; ln != NULL; ln = ln->next) RebuildGraph(ln->datum, suff); } /* Return the search path for the given suffix, or NULL. */ SearchPath * Suff_GetPath(const char *sname) { Suffix *suff = FindSuffixByName(sname); return suff != NULL ? suff->searchPath : NULL; } /* * Extend the search paths for all suffixes to include the default search * path (dirSearchPath). * * The default search path can be defined using the special target '.PATH'. * The search path of each suffix can be defined using the special target * '.PATH'. * * If paths were specified for the ".h" suffix, the directories are stuffed * into a global variable called ".INCLUDES" with each directory preceded by * '-I'. The same is done for the ".a" suffix, except the variable is called * ".LIBS" and the flag is '-L'. */ void Suff_ExtendPaths(void) { SuffixListNode *ln; char *flags; SearchPath *includesPath = SearchPath_New(); SearchPath *libsPath = SearchPath_New(); for (ln = sufflist.first; ln != NULL; ln = ln->next) { Suffix *suff = ln->datum; if (!Lst_IsEmpty(&suff->searchPath->dirs)) { #ifdef INCLUDES - if (suff->flags & SUFF_INCLUDE) + if (suff->include) SearchPath_AddAll(includesPath, suff->searchPath); #endif #ifdef LIBRARIES - if (suff->flags & SUFF_LIBRARY) + if (suff->library) SearchPath_AddAll(libsPath, suff->searchPath); #endif SearchPath_AddAll(suff->searchPath, &dirSearchPath); } else { SearchPath_Free(suff->searchPath); suff->searchPath = Dir_CopyDirSearchPath(); } } flags = SearchPath_ToFlags(includesPath, "-I"); Global_Set(".INCLUDES", flags); free(flags); flags = SearchPath_ToFlags(libsPath, "-L"); Global_Set(".LIBS", flags); free(flags); SearchPath_Free(includesPath); SearchPath_Free(libsPath); } /* * Add the given suffix as a type of file which gets included. * Called when a '.INCLUDES: .h' line is parsed. * To have an effect, the suffix must already exist. * This affects the magic variable '.INCLUDES'. */ void Suff_AddInclude(const char *suffName) { Suffix *suff = FindSuffixByName(suffName); if (suff != NULL) - suff->flags |= SUFF_INCLUDE; + suff->include = true; } /* * Add the given suffix as a type of file which is a library. * Called when a '.LIBS: .a' line is parsed. * To have an effect, the suffix must already exist. * This affects the magic variable '.LIBS'. */ void Suff_AddLib(const char *suffName) { Suffix *suff = FindSuffixByName(suffName); if (suff != NULL) - suff->flags |= SUFF_LIBRARY; + suff->library = true; } /********** Implicit Source Search Functions *********/ static void CandidateSearcher_Init(CandidateSearcher *cs) { Lst_Init(&cs->list); } static void CandidateSearcher_Done(CandidateSearcher *cs) { Lst_Done(&cs->list); } static void CandidateSearcher_Add(CandidateSearcher *cs, Candidate *cand) { /* TODO: filter duplicates */ Lst_Append(&cs->list, cand); } static void CandidateSearcher_AddIfNew(CandidateSearcher *cs, Candidate *cand) { /* TODO: filter duplicates */ if (Lst_FindDatum(&cs->list, cand) == NULL) Lst_Append(&cs->list, cand); } static void CandidateSearcher_MoveAll(CandidateSearcher *cs, CandidateList *list) { /* TODO: filter duplicates */ Lst_MoveAll(&cs->list, list); } #ifdef DEBUG_SRC static void CandidateList_PrintAddrs(CandidateList *list) { CandidateListNode *ln; for (ln = list->first; ln != NULL; ln = ln->next) { Candidate *cand = ln->datum; debug_printf(" %p:%s", cand, cand->file); } debug_printf("\n"); } #endif static Candidate * Candidate_New(char *name, char *prefix, Suffix *suff, Candidate *parent, GNode *gn) { Candidate *cand = bmake_malloc(sizeof *cand); cand->file = name; cand->prefix = prefix; cand->suff = Suffix_Ref(suff); cand->parent = parent; cand->node = gn; cand->numChildren = 0; #ifdef DEBUG_SRC Lst_Init(&cand->childrenList); #endif return cand; } /* Add a new candidate to the list. */ /*ARGSUSED*/ static void CandidateList_Add(CandidateList *list, char *srcName, Candidate *targ, Suffix *suff, const char *debug_tag) { Candidate *cand = Candidate_New(srcName, targ->prefix, suff, targ, NULL); targ->numChildren++; Lst_Append(list, cand); #ifdef DEBUG_SRC Lst_Append(&targ->childrenList, cand); debug_printf("%s add suff %p:%s candidate %p:%s to list %p:", debug_tag, targ, targ->file, cand, cand->file, list); CandidateList_PrintAddrs(list); #endif } /* * Add all candidates to the list that can be formed by applying a suffix to * the candidate. */ static void CandidateList_AddCandidatesFor(CandidateList *list, Candidate *cand) { SuffixListNode *ln; for (ln = cand->suff->children.first; ln != NULL; ln = ln->next) { Suffix *suff = ln->datum; - if ((suff->flags & SUFF_NULL) && suff->name[0] != '\0') { + if (suff->isNull && suff->name[0] != '\0') { /* * If the suffix has been marked as the NULL suffix, * also create a candidate for a file with no suffix * attached. */ CandidateList_Add(list, bmake_strdup(cand->prefix), cand, suff, "1"); } CandidateList_Add(list, str_concat2(cand->prefix, suff->name), cand, suff, "2"); } } /* * Free the first candidate in the list that is not referenced anymore. * Return whether a candidate was removed. */ static bool RemoveCandidate(CandidateList *srcs) { CandidateListNode *ln; #ifdef DEBUG_SRC debug_printf("cleaning list %p:", srcs); CandidateList_PrintAddrs(srcs); #endif for (ln = srcs->first; ln != NULL; ln = ln->next) { Candidate *src = ln->datum; if (src->numChildren == 0) { if (src->parent == NULL) free(src->prefix); else { #ifdef DEBUG_SRC /* XXX: Lst_RemoveDatum */ CandidateListNode *ln2; ln2 = Lst_FindDatum(&src->parent->childrenList, src); if (ln2 != NULL) Lst_Remove(&src->parent->childrenList, ln2); #endif src->parent->numChildren--; } #ifdef DEBUG_SRC debug_printf("free: list %p src %p:%s children %d\n", srcs, src, src->file, src->numChildren); Lst_Done(&src->childrenList); #endif Lst_Remove(srcs, ln); free(src->file); free(src); return true; } #ifdef DEBUG_SRC else { debug_printf("keep: list %p src %p:%s children %d:", srcs, src, src->file, src->numChildren); CandidateList_PrintAddrs(&src->childrenList); } #endif } return false; } /* Find the first existing file/target in srcs. */ static Candidate * FindThem(CandidateList *srcs, CandidateSearcher *cs) { HashSet seen; HashSet_Init(&seen); while (!Lst_IsEmpty(srcs)) { Candidate *src = Lst_Dequeue(srcs); #ifdef DEBUG_SRC debug_printf("remove from list %p src %p:%s\n", srcs, src, src->file); #endif DEBUG1(SUFF, "\ttrying %s...", src->file); /* * A file is considered to exist if either a node exists in the * graph for it or the file actually exists. */ if (Targ_FindNode(src->file) != NULL) { found: HashSet_Done(&seen); DEBUG0(SUFF, "got it\n"); return src; } { char *file = Dir_FindFile(src->file, src->suff->searchPath); if (file != NULL) { free(file); goto found; } } DEBUG0(SUFF, "not there\n"); if (HashSet_Add(&seen, src->file)) CandidateList_AddCandidatesFor(srcs, src); else { DEBUG1(SUFF, "FindThem: skipping duplicate \"%s\"\n", src->file); } CandidateSearcher_Add(cs, src); } HashSet_Done(&seen); return NULL; } /* * See if any of the children of the candidate's GNode is one from which the * target can be transformed. If there is one, a candidate is put together * for it and returned. */ static Candidate * FindCmds(Candidate *targ, CandidateSearcher *cs) { GNodeListNode *gln; GNode *tgn; /* Target GNode */ GNode *sgn; /* Source GNode */ size_t prefLen; /* The length of the defined prefix */ Suffix *suff; /* Suffix of the matching candidate */ Candidate *ret; /* Return value */ tgn = targ->node; prefLen = strlen(targ->prefix); for (gln = tgn->children.first; gln != NULL; gln = gln->next) { const char *base; sgn = gln->datum; if (sgn->type & OP_OPTIONAL && Lst_IsEmpty(&tgn->commands)) { /* * We haven't looked to see if .OPTIONAL files exist * yet, so don't use one as the implicit source. * This allows us to use .OPTIONAL in .depend files so * make won't complain "don't know how to make xxx.h" * when a dependent file has been moved/deleted. */ continue; } base = str_basename(sgn->name); if (strncmp(base, targ->prefix, prefLen) != 0) continue; /* The node matches the prefix, see if it has a known suffix. */ suff = FindSuffixByName(base + prefLen); if (suff == NULL) continue; /* * It even has a known suffix, see if there's a transformation * defined between the node's suffix and the target's suffix. * * XXX: Handle multi-stage transformations here, too. */ if (Lst_FindDatum(&suff->parents, targ->suff) != NULL) break; } if (gln == NULL) return NULL; ret = Candidate_New(bmake_strdup(sgn->name), targ->prefix, suff, targ, sgn); targ->numChildren++; #ifdef DEBUG_SRC debug_printf("3 add targ %p:%s ret %p:%s\n", targ, targ->file, ret, ret->file); Lst_Append(&targ->childrenList, ret); #endif CandidateSearcher_Add(cs, ret); DEBUG1(SUFF, "\tusing existing source %s\n", sgn->name); return ret; } static void ExpandWildcards(GNodeListNode *cln, GNode *pgn) { GNode *cgn = cln->datum; StringList expansions; if (!Dir_HasWildcards(cgn->name)) return; /* * Expand the word along the chosen path */ Lst_Init(&expansions); SearchPath_Expand(Suff_FindPath(cgn), cgn->name, &expansions); while (!Lst_IsEmpty(&expansions)) { GNode *gn; /* * Fetch next expansion off the list and find its GNode */ char *cp = Lst_Dequeue(&expansions); DEBUG1(SUFF, "%s...", cp); gn = Targ_GetNode(cp); /* Add gn to the parents child list before the original child */ Lst_InsertBefore(&pgn->children, cln, gn); Lst_Append(&gn->parents, pgn); pgn->unmade++; } Lst_Done(&expansions); DEBUG0(SUFF, "\n"); /* * Now the source is expanded, remove it from the list of children to * keep it from being processed. */ pgn->unmade--; Lst_Remove(&pgn->children, cln); Lst_Remove(&cgn->parents, Lst_FindDatum(&cgn->parents, pgn)); } /* * Break the result into a vector of strings whose nodes we can find, then * add those nodes to the members list. * * Unfortunately, we can't use Str_Words because it doesn't understand about * variable expressions with spaces in them. */ static void ExpandChildrenRegular(char *cp, GNode *pgn, GNodeList *members) { char *start; pp_skip_hspace(&cp); start = cp; while (*cp != '\0') { if (*cp == ' ' || *cp == '\t') { GNode *gn; /* * White-space -- terminate element, find the node, * add it, skip any further spaces. */ *cp++ = '\0'; gn = Targ_GetNode(start); Lst_Append(members, gn); pp_skip_hspace(&cp); /* Continue at the next non-space. */ start = cp; } else if (*cp == '$') { /* Skip over the variable expression. */ const char *nested_p = cp; FStr junk; (void)Var_Parse(&nested_p, pgn, VARE_PARSE_ONLY, &junk); /* TODO: handle errors */ if (junk.str == var_Error) { Parse_Error(PARSE_FATAL, "Malformed variable expression at \"%s\"", cp); cp++; } else { cp += nested_p - cp; } FStr_Done(&junk); } else if (cp[0] == '\\' && cp[1] != '\0') { /* Escaped something -- skip over it. */ /* * XXX: In other places, escaping at this syntactical * position is done by a '$', not a '\'. The '\' is * only used in variable modifiers. */ cp += 2; } else { cp++; } } if (cp != start) { /* * Stuff left over -- add it to the list too */ GNode *gn = Targ_GetNode(start); Lst_Append(members, gn); } } /* * Expand the names of any children of a given node that contain variable * expressions or file wildcards into actual targets. * * The expanded node is removed from the parent's list of children, and the * parent's unmade counter is decremented, but other nodes may be added. * * Input: * cln Child to examine * pgn Parent node being processed */ static void ExpandChildren(GNodeListNode *cln, GNode *pgn) { GNode *cgn = cln->datum; char *cp; /* Expanded value */ if (!Lst_IsEmpty(&cgn->order_pred) || !Lst_IsEmpty(&cgn->order_succ)) /* It is all too hard to process the result of .ORDER */ return; if (cgn->type & OP_WAIT) /* Ignore these (& OP_PHONY ?) */ return; /* * First do variable expansion -- this takes precedence over wildcard * expansion. If the result contains wildcards, they'll be gotten to * later since the resulting words are tacked on to the end of the * children list. */ if (strchr(cgn->name, '$') == NULL) { ExpandWildcards(cln, pgn); return; } DEBUG1(SUFF, "Expanding \"%s\"...", cgn->name); (void)Var_Subst(cgn->name, pgn, VARE_UNDEFERR, &cp); /* TODO: handle errors */ { GNodeList members = LST_INIT; if (cgn->type & OP_ARCHV) { /* * Node was an 'archive(member)' target, so * call on the Arch module to find the nodes for us, * expanding variables in the parent's scope. */ char *p = cp; (void)Arch_ParseArchive(&p, &members, pgn); } else { ExpandChildrenRegular(cp, pgn, &members); } /* * Add all elements of the members list to the parent node. */ while (!Lst_IsEmpty(&members)) { GNode *gn = Lst_Dequeue(&members); DEBUG1(SUFF, "%s...", gn->name); /* * Add gn to the parents child list before the * original child. */ Lst_InsertBefore(&pgn->children, cln, gn); Lst_Append(&gn->parents, pgn); pgn->unmade++; /* Expand wildcards on new node */ ExpandWildcards(cln->prev, pgn); } Lst_Done(&members); free(cp); } DEBUG0(SUFF, "\n"); /* * Now the source is expanded, remove it from the list of children to * keep it from being processed. */ pgn->unmade--; Lst_Remove(&pgn->children, cln); Lst_Remove(&cgn->parents, Lst_FindDatum(&cgn->parents, pgn)); } static void ExpandAllChildren(GNode *gn) { GNodeListNode *ln, *nln; for (ln = gn->children.first; ln != NULL; ln = nln) { nln = ln->next; ExpandChildren(ln, gn); } } /* * Find a path along which to expand the node. * * If the node has a known suffix, use that path. * If it has no known suffix, use the default system search path. * * Input: * gn Node being examined * * Results: * The appropriate path to search for the GNode. */ SearchPath * Suff_FindPath(GNode *gn) { Suffix *suff = gn->suffix; if (suff == NULL) { char *name = gn->name; size_t nameLen = strlen(gn->name); SuffixListNode *ln; for (ln = sufflist.first; ln != NULL; ln = ln->next) if (Suffix_IsSuffix(ln->datum, nameLen, name + nameLen)) break; DEBUG1(SUFF, "Wildcard expanding \"%s\"...", gn->name); if (ln != NULL) suff = ln->datum; /* * XXX: Here we can save the suffix so we don't have to do * this again. */ } if (suff != NULL) { DEBUG1(SUFF, "suffix is \"%s\"...\n", suff->name); return suff->searchPath; } else { DEBUG0(SUFF, "\n"); return &dirSearchPath; /* Use default search path */ } } /* * Apply a transformation rule, given the source and target nodes and * suffixes. * * The source and target are linked and the commands from the transformation * are added to the target node's commands list. The target also inherits all * the sources for the transformation rule. * * Results: * true if successful, false if not. */ static bool ApplyTransform(GNode *tgn, GNode *sgn, Suffix *tsuff, Suffix *ssuff) { GNodeListNode *ln; char *tname; /* Name of transformation rule */ GNode *gn; /* Node for the transformation rule */ /* Form the proper links between the target and source. */ Lst_Append(&tgn->children, sgn); Lst_Append(&sgn->parents, tgn); tgn->unmade++; /* Locate the transformation rule itself. */ tname = str_concat2(ssuff->name, tsuff->name); gn = FindTransformByName(tname); free(tname); /* This can happen when linking an OP_MEMBER and OP_ARCHV node. */ if (gn == NULL) return false; DEBUG3(SUFF, "\tapplying %s -> %s to \"%s\"\n", ssuff->name, tsuff->name, tgn->name); /* Record last child; Make_HandleUse may add child nodes. */ ln = tgn->children.last; /* Apply the rule. */ Make_HandleUse(gn, tgn); /* Deal with wildcards and variables in any acquired sources. */ ln = ln != NULL ? ln->next : NULL; while (ln != NULL) { GNodeListNode *nln = ln->next; ExpandChildren(ln, tgn); ln = nln; } /* * Keep track of another parent to which this node is transformed so * the .IMPSRC variable can be set correctly for the parent. */ Lst_Append(&sgn->implicitParents, tgn); return true; } /* * Member has a known suffix, so look for a transformation rule from * it to a possible suffix of the archive. * * Rather than searching through the entire list, we just look at * suffixes to which the member's suffix may be transformed. */ static void ExpandMember(GNode *gn, const char *eoarch, GNode *mem, Suffix *memSuff) { GNodeListNode *ln; size_t nameLen = (size_t)(eoarch - gn->name); /* Use first matching suffix... */ for (ln = memSuff->parents.first; ln != NULL; ln = ln->next) if (Suffix_IsSuffix(ln->datum, nameLen, eoarch)) break; if (ln != NULL) { /* Got one -- apply it */ Suffix *suff = ln->datum; if (!ApplyTransform(gn, mem, suff, memSuff)) { DEBUG2(SUFF, "\tNo transformation from %s -> %s\n", memSuff->name, suff->name); } } } static void FindDeps(GNode *, CandidateSearcher *); /* * Locate dependencies for an OP_ARCHV node. * * Input: * gn Node for which to locate dependencies * * Side Effects: * Same as Suff_FindDeps */ static void FindDepsArchive(GNode *gn, CandidateSearcher *cs) { char *eoarch; /* End of archive portion */ char *eoname; /* End of member portion */ GNode *mem; /* Node for member */ Suffix *memSuff; const char *name; /* Start of member's name */ /* * The node is an archive(member) pair. so we must find a * suffix for both of them. */ eoarch = strchr(gn->name, '('); eoname = strchr(eoarch, ')'); /* * Caller guarantees the format `libname(member)', via * Arch_ParseArchive. */ assert(eoarch != NULL); assert(eoname != NULL); *eoname = '\0'; /* Nuke parentheses during suffix search */ *eoarch = '\0'; /* So a suffix can be found */ name = eoarch + 1; /* * To simplify things, call Suff_FindDeps recursively on the member * now, so we can simply compare the member's .PREFIX and .TARGET * variables to locate its suffix. This allows us to figure out the * suffix to use for the archive without having to do a quadratic * search over the suffix list, backtracking for each one. */ mem = Targ_GetNode(name); FindDeps(mem, cs); /* Create the link between the two nodes right off. */ Lst_Append(&gn->children, mem); Lst_Append(&mem->parents, gn); gn->unmade++; /* Copy in the variables from the member node to this one. */ Var_Set(gn, PREFIX, GNode_VarPrefix(mem)); Var_Set(gn, TARGET, GNode_VarTarget(mem)); memSuff = mem->suffix; if (memSuff == NULL) { /* Didn't know what it was. */ DEBUG0(SUFF, "using null suffix\n"); memSuff = nullSuff; } /* Set the other two local variables required for this target. */ Var_Set(gn, MEMBER, name); Var_Set(gn, ARCHIVE, gn->name); /* Set $@ for compatibility with other makes. */ Var_Set(gn, TARGET, gn->name); /* * Now we've got the important local variables set, expand any sources * that still contain variables or wildcards in their names. */ ExpandAllChildren(gn); if (memSuff != NULL) ExpandMember(gn, eoarch, mem, memSuff); /* * Replace the opening and closing parens now we've no need of the * separate pieces. */ *eoarch = '('; *eoname = ')'; /* * Pretend gn appeared to the left of a dependency operator so the * user needn't provide a transformation from the member to the * archive. */ if (!GNode_IsTarget(gn)) gn->type |= OP_DEPENDS; /* * Flag the member as such so we remember to look in the archive for * its modification time. The OP_JOIN | OP_MADE is needed because * this target should never get made. */ mem->type |= OP_MEMBER | OP_JOIN | OP_MADE; } /* * If the node is a library, it is the arch module's job to find it * and set the TARGET variable accordingly. We merely provide the * search path, assuming all libraries end in ".a" (if the suffix * hasn't been defined, there's nothing we can do for it, so we just * set the TARGET variable to the node's name in order to give it a * value). */ static void FindDepsLib(GNode *gn) { Suffix *suff = FindSuffixByName(LIBSUFF); if (suff != NULL) { Suffix_Reassign(&gn->suffix, suff); Arch_FindLib(gn, suff->searchPath); } else { Suffix_Unassign(&gn->suffix); Var_Set(gn, TARGET, gn->name); } /* * Because a library (-lfoo) target doesn't follow the standard * filesystem conventions, we don't set the regular variables for * the thing. .PREFIX is simply made empty. */ Var_Set(gn, PREFIX, ""); } static void FindDepsRegularKnown(const char *name, size_t nameLen, GNode *gn, CandidateList *srcs, CandidateList *targs) { SuffixListNode *ln; Candidate *targ; char *pref; for (ln = sufflist.first; ln != NULL; ln = ln->next) { Suffix *suff = ln->datum; if (!Suffix_IsSuffix(suff, nameLen, name + nameLen)) continue; pref = bmake_strldup(name, (size_t)(nameLen - suff->nameLen)); targ = Candidate_New(bmake_strdup(gn->name), pref, suff, NULL, gn); CandidateList_AddCandidatesFor(srcs, targ); /* Record the target so we can nuke it. */ Lst_Append(targs, targ); } } static void FindDepsRegularUnknown(GNode *gn, const char *sopref, CandidateList *srcs, CandidateList *targs) { Candidate *targ; if (!Lst_IsEmpty(targs) || nullSuff == NULL) return; DEBUG1(SUFF, "\tNo known suffix on %s. Using .NULL suffix\n", gn->name); targ = Candidate_New(bmake_strdup(gn->name), bmake_strdup(sopref), nullSuff, NULL, gn); /* * Only use the default suffix rules if we don't have commands * defined for this gnode; traditional make programs used to not * define suffix rules if the gnode had children but we don't do * this anymore. */ if (Lst_IsEmpty(&gn->commands)) CandidateList_AddCandidatesFor(srcs, targ); else { DEBUG0(SUFF, "not "); } DEBUG0(SUFF, "adding suffix rules\n"); Lst_Append(targs, targ); } /* * Deal with finding the thing on the default search path. We always do * that, not only if the node is only a source (not on the lhs of a * dependency operator or [XXX] it has neither children or commands) as * the old pmake did. */ static void FindDepsRegularPath(GNode *gn, Candidate *targ) { if (gn->type & (OP_PHONY | OP_NOPATH)) return; free(gn->path); gn->path = Dir_FindFile(gn->name, (targ == NULL ? &dirSearchPath : targ->suff->searchPath)); if (gn->path == NULL) return; Var_Set(gn, TARGET, gn->path); if (targ != NULL) { /* * Suffix known for the thing -- trim the suffix off * the path to form the proper .PREFIX variable. */ size_t savep = strlen(gn->path) - targ->suff->nameLen; char savec; Suffix_Reassign(&gn->suffix, targ->suff); savec = gn->path[savep]; gn->path[savep] = '\0'; Var_Set(gn, PREFIX, str_basename(gn->path)); gn->path[savep] = savec; } else { /* * The .PREFIX gets the full path if the target has no * known suffix. */ Suffix_Unassign(&gn->suffix); Var_Set(gn, PREFIX, str_basename(gn->path)); } } /* * Locate implicit dependencies for regular targets. * * Input: * gn Node for which to find sources * * Side Effects: * Same as Suff_FindDeps */ static void FindDepsRegular(GNode *gn, CandidateSearcher *cs) { /* List of sources at which to look */ CandidateList srcs = LST_INIT; /* * List of targets to which things can be transformed. * They all have the same file, but different suff and prefix fields. */ CandidateList targs = LST_INIT; Candidate *bottom; /* Start of found transformation path */ Candidate *src; Candidate *targ; const char *name = gn->name; size_t nameLen = strlen(name); #ifdef DEBUG_SRC DEBUG1(SUFF, "FindDepsRegular \"%s\"\n", gn->name); #endif /* * We're caught in a catch-22 here. On the one hand, we want to use * any transformation implied by the target's sources, but we can't * examine the sources until we've expanded any variables/wildcards * they may hold, and we can't do that until we've set up the * target's local variables and we can't do that until we know what * the proper suffix for the target is (in case there are two * suffixes one of which is a suffix of the other) and we can't know * that until we've found its implied source, which we may not want * to use if there's an existing source that implies a different * transformation. * * In an attempt to get around this, which may not work all the time, * but should work most of the time, we look for implied sources * first, checking transformations to all possible suffixes of the * target, use what we find to set the target's local variables, * expand the children, then look for any overriding transformations * they imply. Should we find one, we discard the one we found before. */ bottom = NULL; targ = NULL; if (!(gn->type & OP_PHONY)) { FindDepsRegularKnown(name, nameLen, gn, &srcs, &targs); /* Handle target of unknown suffix... */ FindDepsRegularUnknown(gn, name, &srcs, &targs); /* * Using the list of possible sources built up from the target * suffix(es), try and find an existing file/target that * matches. */ bottom = FindThem(&srcs, cs); if (bottom == NULL) { /* * No known transformations -- use the first suffix * found for setting the local variables. */ if (targs.first != NULL) targ = targs.first->datum; else targ = NULL; } else { /* * Work up the transformation path to find the suffix * of the target to which the transformation was made. */ for (targ = bottom; targ->parent != NULL; targ = targ->parent) continue; } } Var_Set(gn, TARGET, GNode_Path(gn)); Var_Set(gn, PREFIX, targ != NULL ? targ->prefix : gn->name); /* * Now we've got the important local variables set, expand any sources * that still contain variables or wildcards in their names. */ { GNodeListNode *ln, *nln; for (ln = gn->children.first; ln != NULL; ln = nln) { nln = ln->next; ExpandChildren(ln, gn); } } if (targ == NULL) { DEBUG1(SUFF, "\tNo valid suffix on %s\n", gn->name); sfnd_abort: FindDepsRegularPath(gn, targ); goto sfnd_return; } /* * If the suffix indicates that the target is a library, mark that in * the node's type field. */ - if (targ->suff->flags & SUFF_LIBRARY) + if (targ->suff->library) gn->type |= OP_LIB; /* * Check for overriding transformation rule implied by sources */ if (!Lst_IsEmpty(&gn->children)) { src = FindCmds(targ, cs); if (src != NULL) { /* * Free up all the candidates in the transformation * path, up to but not including the parent node. */ while (bottom != NULL && bottom->parent != NULL) { CandidateSearcher_AddIfNew(cs, bottom); bottom = bottom->parent; } bottom = src; } } if (bottom == NULL) { /* No idea from where it can come -- return now. */ goto sfnd_abort; } /* * We now have a list of candidates headed by 'bottom' and linked via * their 'parent' pointers. What we do next is create links between * source and target nodes (which may or may not have been created) * and set the necessary local variables in each target. * * The commands for each target are set from the commands of the * transformation rule used to get from the src suffix to the targ * suffix. Note that this causes the commands list of the original * node, gn, to be replaced with the commands of the final * transformation rule. */ if (bottom->node == NULL) bottom->node = Targ_GetNode(bottom->file); for (src = bottom; src->parent != NULL; src = src->parent) { targ = src->parent; Suffix_Reassign(&src->node->suffix, src->suff); if (targ->node == NULL) targ->node = Targ_GetNode(targ->file); ApplyTransform(targ->node, src->node, targ->suff, src->suff); if (targ->node != gn) { /* * Finish off the dependency-search process for any * nodes between bottom and gn (no point in questing * around the filesystem for their implicit source * when it's already known). Note that the node * can't have any sources that need expanding, since * SuffFindThem will stop on an existing node, so all * we need to do is set the standard variables. */ targ->node->type |= OP_DEPS_FOUND; Var_Set(targ->node, PREFIX, targ->prefix); Var_Set(targ->node, TARGET, targ->node->name); } } Suffix_Reassign(&gn->suffix, src->suff); /* * Nuke the transformation path and the candidates left over in the * two lists. */ sfnd_return: if (bottom != NULL) CandidateSearcher_AddIfNew(cs, bottom); while (RemoveCandidate(&srcs) || RemoveCandidate(&targs)) continue; CandidateSearcher_MoveAll(cs, &srcs); CandidateSearcher_MoveAll(cs, &targs); } static void CandidateSearcher_CleanUp(CandidateSearcher *cs) { while (RemoveCandidate(&cs->list)) continue; assert(Lst_IsEmpty(&cs->list)); } /* * Find implicit sources for the target. * * Nodes are added to the graph as children of the passed-in node. The nodes * are marked to have their IMPSRC variable filled in. The PREFIX variable * is set for the given node and all its implied children. * * The path found by this target is the shortest path in the transformation * graph, which may pass through nonexistent targets, to an existing target. * The search continues on all paths from the root suffix until a file is * found. I.e. if there's a path .o -> .c -> .l -> .l,v from the root and the * .l,v file exists but the .c and .l files don't, the search will branch out * in all directions from .o and again from all the nodes on the next level * until the .l,v node is encountered. */ void Suff_FindDeps(GNode *gn) { CandidateSearcher cs; CandidateSearcher_Init(&cs); FindDeps(gn, &cs); CandidateSearcher_CleanUp(&cs); CandidateSearcher_Done(&cs); } static void FindDeps(GNode *gn, CandidateSearcher *cs) { if (gn->type & OP_DEPS_FOUND) return; gn->type |= OP_DEPS_FOUND; /* Make sure we have these set, may get revised below. */ Var_Set(gn, TARGET, GNode_Path(gn)); Var_Set(gn, PREFIX, gn->name); DEBUG1(SUFF, "SuffFindDeps \"%s\"\n", gn->name); if (gn->type & OP_ARCHV) FindDepsArchive(gn, cs); else if (gn->type & OP_LIB) FindDepsLib(gn); else FindDepsRegular(gn, cs); } /* * Define which suffix is the null suffix. * * Need to handle the changing of the null suffix gracefully so the old * transformation rules don't just go away. * * Input: * name Name of null suffix */ void Suff_SetNull(const char *name) { Suffix *suff = FindSuffixByName(name); if (suff == NULL) { Parse_Error(PARSE_WARNING, - "Desired null suffix %s not defined.", + "Desired null suffix %s not defined", name); return; } if (nullSuff != NULL) - nullSuff->flags &= ~(unsigned)SUFF_NULL; - suff->flags |= SUFF_NULL; + nullSuff->isNull = false; + suff->isNull = true; /* XXX: Here's where the transformation mangling would take place. */ nullSuff = suff; } /* Initialize the suffixes module. */ void Suff_Init(void) { /* * Create null suffix for single-suffix rules (POSIX). The thing * doesn't actually go on the suffix list or everyone will think * that's its suffix. */ Suff_ClearSuffixes(); } /* Clean up the suffixes module. */ void Suff_End(void) { #ifdef CLEANUP Lst_DoneCall(&sufflist, SuffFree); Lst_DoneCall(&suffClean, SuffFree); if (nullSuff != NULL) SuffFree(nullSuff); Lst_Done(&transforms); #endif } static void -PrintSuffNames(const char *prefix, SuffixList *suffs) +PrintSuffNames(const char *prefix, const SuffixList *suffs) { SuffixListNode *ln; debug_printf("#\t%s: ", prefix); for (ln = suffs->first; ln != NULL; ln = ln->next) { - Suffix *suff = ln->datum; + const Suffix *suff = ln->datum; debug_printf("%s ", suff->name); } debug_printf("\n"); } static void -Suffix_Print(Suffix *suff) +Suffix_Print(const Suffix *suff) { + Buffer buf; + + Buf_InitSize(&buf, 16); + Buf_AddFlag(&buf, suff->include, "SUFF_INCLUDE"); + Buf_AddFlag(&buf, suff->library, "SUFF_LIBRARY"); + Buf_AddFlag(&buf, suff->isNull, "SUFF_NULL"); + debug_printf("# \"%s\" (num %d, ref %d)", suff->name, suff->sNum, suff->refCount); - if (suff->flags != 0) { - char flags_buf[SuffixFlags_ToStringSize]; - - debug_printf(" (%s)", - SuffixFlags_ToString(flags_buf, suff->flags)); - } + if (buf.len > 0) + debug_printf(" (%s)", buf.data); debug_printf("\n"); + Buf_Done(&buf); + PrintSuffNames("To", &suff->parents); PrintSuffNames("From", &suff->children); debug_printf("#\tSearch Path: "); SearchPath_Print(suff->searchPath); debug_printf("\n"); } static void PrintTransformation(GNode *t) { debug_printf("%-16s:", t->name); Targ_PrintType(t->type); debug_printf("\n"); Targ_PrintCmds(t); debug_printf("\n"); } void Suff_PrintAll(void) { debug_printf("#*** Suffixes:\n"); { SuffixListNode *ln; for (ln = sufflist.first; ln != NULL; ln = ln->next) Suffix_Print(ln->datum); } debug_printf("#*** Transformations:\n"); { GNodeListNode *ln; for (ln = transforms.first; ln != NULL; ln = ln->next) PrintTransformation(ln->datum); } } + +const char * +Suff_NamesStr(void) +{ + Buffer buf; + SuffixListNode *ln; + Suffix *suff; + + Buf_InitSize(&buf, 16); + for (ln = sufflist.first; ln != NULL; ln = ln->next) { + suff = ln->datum; + if (ln != sufflist.first) + Buf_AddByte(&buf, ' '); + Buf_AddStr(&buf, suff->name); + } + return Buf_DoneData(&buf); +} diff --git a/contrib/bmake/targ.c b/contrib/bmake/targ.c index 68573644ff35..beb038fa1a4b 100644 --- a/contrib/bmake/targ.c +++ b/contrib/bmake/targ.c @@ -1,617 +1,632 @@ -/* $NetBSD: targ.c,v 1.168 2021/04/03 12:01:00 rillig Exp $ */ +/* $NetBSD: targ.c,v 1.173 2021/11/28 19:51:06 rillig Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Maintaining the targets and sources, which are both implemented as GNode. * * Interface: * Targ_Init Initialize the module. * * Targ_End Clean up the module. * * Targ_List Return the list of all targets so far. * * GNode_New Create a new GNode for the passed target * (string). The node is *not* placed in the * hash table, though all its fields are * initialized. * * Targ_FindNode Find the node, or return NULL. * * Targ_GetNode Find the node, or create it. * * Targ_NewInternalNode * Create an internal node. * * Targ_FindList Given a list of names, find nodes for all * of them, creating them as necessary. * * Targ_Precious Return true if the target is precious and * should not be removed if we are interrupted. * * Targ_Propagate Propagate information between related nodes. * Should be called after the makefiles are parsed * but before any action is taken. * * Debugging: * Targ_PrintGraph * Print out the entire graph, all variables and * statistics for the directory cache. Should print * something for suffixes, too, but... */ #include #include "make.h" #include "dir.h" /* "@(#)targ.c 8.2 (Berkeley) 3/19/94" */ -MAKE_RCSID("$NetBSD: targ.c,v 1.168 2021/04/03 12:01:00 rillig Exp $"); +MAKE_RCSID("$NetBSD: targ.c,v 1.173 2021/11/28 19:51:06 rillig Exp $"); /* * All target nodes that appeared on the left-hand side of one of the * dependency operators ':', '::', '!'. */ static GNodeList allTargets = LST_INIT; static HashTable allTargetsByName; #ifdef CLEANUP static GNodeList allNodes = LST_INIT; static void GNode_Free(void *); #endif void Targ_Init(void) { HashTable_Init(&allTargetsByName); } void Targ_End(void) { Targ_Stats(); #ifdef CLEANUP Lst_Done(&allTargets); HashTable_Done(&allTargetsByName); Lst_DoneCall(&allNodes, GNode_Free); #endif } void Targ_Stats(void) { HashTable_DebugStats(&allTargetsByName, "targets"); } /* * Return the list of all targets, which are all nodes that appear on the * left-hand side of a dependency declaration such as "target: source". * The returned list does not contain pure sources. */ GNodeList * Targ_List(void) { return &allTargets; } /* * Create a new graph node, but don't register it anywhere. * * Graph nodes that appear on the left-hand side of a dependency line such * as "target: source" are called targets. XXX: In some cases (like the * .ALLTARGETS variable), all nodes are called targets as well, even if they * never appear on the left-hand side. This is a mistake. * * Typical names for graph nodes are: * "src.c" (an ordinary file) * "clean" (a .PHONY target) * ".END" (a special hook target) * "-lm" (a library) * "libc.a(isspace.o)" (an archive member) */ GNode * GNode_New(const char *name) { GNode *gn; gn = bmake_malloc(sizeof *gn); gn->name = bmake_strdup(name); gn->uname = NULL; gn->path = NULL; gn->type = name[0] == '-' && name[1] == 'l' ? OP_LIB : OP_NONE; - gn->flags = GNF_NONE; + memset(&gn->flags, 0, sizeof(gn->flags)); gn->made = UNMADE; gn->unmade = 0; gn->mtime = 0; gn->youngestChild = NULL; Lst_Init(&gn->implicitParents); Lst_Init(&gn->parents); Lst_Init(&gn->children); Lst_Init(&gn->order_pred); Lst_Init(&gn->order_succ); Lst_Init(&gn->cohorts); gn->cohort_num[0] = '\0'; gn->unmade_cohorts = 0; gn->centurion = NULL; gn->checked_seqno = 0; HashTable_Init(&gn->vars); Lst_Init(&gn->commands); gn->suffix = NULL; gn->fname = NULL; gn->lineno = 0; #ifdef CLEANUP Lst_Append(&allNodes, gn); #endif return gn; } #ifdef CLEANUP static void GNode_Free(void *gnp) { GNode *gn = gnp; free(gn->name); free(gn->uname); free(gn->path); /* Don't free gn->youngestChild since it is not owned by this node. */ /* * In the following lists, only free the list nodes, but not the * GNodes in them since these are not owned by this node. */ Lst_Done(&gn->implicitParents); Lst_Done(&gn->parents); Lst_Done(&gn->children); Lst_Done(&gn->order_pred); Lst_Done(&gn->order_succ); Lst_Done(&gn->cohorts); /* * Do not free the variables themselves, even though they are owned * by this node. * * XXX: For the nodes that represent targets or sources (and not * SCOPE_GLOBAL), it should be safe to free the variables as well, * since each node manages the memory for all its variables itself. * * XXX: The GNodes that are only used as variable scopes (SCOPE_CMD, * SCOPE_GLOBAL, SCOPE_INTERNAL) are not freed at all (see Var_End, * where they are not mentioned). These might be freed at all, if * their variable values are indeed not used anywhere else (see * Trace_Init for the only suspicious use). */ HashTable_Done(&gn->vars); /* * Do not free the commands themselves, as they may be shared with * other nodes. */ Lst_Done(&gn->commands); /* * gn->suffix is not owned by this node. * * XXX: gn->suffix should be unreferenced here. This requires a * thorough check that the reference counting is done correctly in * all places, otherwise a suffix might be freed too early. */ free(gn); } #endif /* Get the existing global node, or return NULL. */ GNode * Targ_FindNode(const char *name) { return HashTable_FindValue(&allTargetsByName, name); } /* Get the existing global node, or create it. */ GNode * Targ_GetNode(const char *name) { bool isNew; HashEntry *he = HashTable_CreateEntry(&allTargetsByName, name, &isNew); if (!isNew) return HashEntry_Get(he); { GNode *gn = Targ_NewInternalNode(name); HashEntry_Set(he, gn); return gn; } } /* * Create a node, register it in .ALLTARGETS but don't store it in the * table of global nodes. This means it cannot be found by name. * * This is used for internal nodes, such as cohorts or .WAIT nodes. */ GNode * Targ_NewInternalNode(const char *name) { GNode *gn = GNode_New(name); Global_Append(".ALLTARGETS", name); Lst_Append(&allTargets, gn); DEBUG1(TARG, "Adding \"%s\" to all targets.\n", gn->name); if (doing_depend) - gn->flags |= FROM_DEPEND; + gn->flags.fromDepend = true; return gn; } /* * Return the .END node, which contains the commands to be run when * everything else has been made. */ GNode * Targ_GetEndNode(void) { /* * Save the node locally to avoid having to search for it all * the time. */ static GNode *endNode = NULL; if (endNode == NULL) { endNode = Targ_GetNode(".END"); endNode->type = OP_SPECIAL; } return endNode; } /* Add the named nodes to the list, creating them as necessary. */ void Targ_FindList(GNodeList *gns, StringList *names) { StringListNode *ln; for (ln = names->first; ln != NULL; ln = ln->next) { const char *name = ln->datum; GNode *gn = Targ_GetNode(name); Lst_Append(gns, gn); } } /* See if the given target is precious. */ bool Targ_Precious(const GNode *gn) { /* XXX: Why are '::' targets precious? */ return allPrecious || gn->type & (OP_PRECIOUS | OP_DOUBLEDEP); } /* * The main target to be made; only for debugging output. * See mainNode in parse.c for the definitive source. */ static GNode *mainTarg; /* Remember the main target to make; only used for debugging. */ void Targ_SetMain(GNode *gn) { mainTarg = gn; } static void PrintNodeNames(GNodeList *gnodes) { GNodeListNode *ln; for (ln = gnodes->first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; debug_printf(" %s%s", gn->name, gn->cohort_num); } } static void PrintNodeNamesLine(const char *label, GNodeList *gnodes) { if (Lst_IsEmpty(gnodes)) return; debug_printf("# %s:", label); PrintNodeNames(gnodes); debug_printf("\n"); } void Targ_PrintCmds(GNode *gn) { StringListNode *ln; for (ln = gn->commands.first; ln != NULL; ln = ln->next) { const char *cmd = ln->datum; debug_printf("\t%s\n", cmd); } } /* * Format a modification time in some reasonable way and return it. * The formatted time is placed in a static area, so it is overwritten * with each call. */ const char * Targ_FmtTime(time_t tm) { static char buf[128]; struct tm *parts = localtime(&tm); (void)strftime(buf, sizeof buf, "%H:%M:%S %b %d, %Y", parts); return buf; } /* Print out a type field giving only those attributes the user can set. */ void -Targ_PrintType(int type) +Targ_PrintType(GNodeType type) { - int tbit; - - type &= ~OP_OPMASK; - - while (type != 0) { - tbit = 1 << (ffs(type) - 1); - type &= ~tbit; - - switch (tbit) { -#define PRINTBIT(bit, attr) case bit: debug_printf(" " attr); break -#define PRINTDBIT(bit, attr) case bit: DEBUG0(TARG, " " attr); break - PRINTBIT(OP_OPTIONAL, ".OPTIONAL"); - PRINTBIT(OP_USE, ".USE"); - PRINTBIT(OP_EXEC, ".EXEC"); - PRINTBIT(OP_IGNORE, ".IGNORE"); - PRINTBIT(OP_PRECIOUS, ".PRECIOUS"); - PRINTBIT(OP_SILENT, ".SILENT"); - PRINTBIT(OP_MAKE, ".MAKE"); - PRINTBIT(OP_JOIN, ".JOIN"); - PRINTBIT(OP_INVISIBLE, ".INVISIBLE"); - PRINTBIT(OP_NOTMAIN, ".NOTMAIN"); - PRINTDBIT(OP_LIB, ".LIB"); - PRINTDBIT(OP_MEMBER, ".MEMBER"); - PRINTDBIT(OP_ARCHV, ".ARCHV"); - PRINTDBIT(OP_MADE, ".MADE"); - PRINTDBIT(OP_PHONY, ".PHONY"); -#undef PRINTBIT -#undef PRINTDBIT + static const struct { + GNodeType bit; + bool internal; + const char name[10]; + } names[] = { + { OP_MEMBER, true, "MEMBER" }, + { OP_LIB, true, "LIB" }, + { OP_ARCHV, true, "ARCHV" }, + { OP_PHONY, true, "PHONY" }, + { OP_NOTMAIN, false, "NOTMAIN" }, + { OP_INVISIBLE, false, "INVISIBLE" }, + { OP_MADE, true, "MADE" }, + { OP_JOIN, false, "JOIN" }, + { OP_MAKE, false, "MAKE" }, + { OP_SILENT, false, "SILENT" }, + { OP_PRECIOUS, false, "PRECIOUS" }, + { OP_IGNORE, false, "IGNORE" }, + { OP_EXEC, false, "EXEC" }, + { OP_USE, false, "USE" }, + { OP_OPTIONAL, false, "OPTIONAL" }, + }; + size_t i; + + for (i = 0; i < sizeof(names) / sizeof(names[0]); i++) { + if (type & names[i].bit) { + if (names[i].internal) + DEBUG1(TARG, " .%s", names[i].name); + else + debug_printf(" .%s", names[i].name); } } } const char * GNodeMade_Name(GNodeMade made) { switch (made) { case UNMADE: return "unmade"; case DEFERRED: return "deferred"; case REQUESTED: return "requested"; case BEINGMADE: return "being made"; case MADE: return "made"; case UPTODATE: return "up-to-date"; case ERROR: return "error when made"; case ABORTED: return "aborted"; default: return "unknown enum_made value"; } } static const char * GNode_OpName(const GNode *gn) { switch (gn->type & OP_OPMASK) { case OP_DEPENDS: return ":"; case OP_FORCE: return "!"; case OP_DOUBLEDEP: return "::"; } return ""; } +static bool +GNodeFlags_IsNone(GNodeFlags flags) +{ + return !flags.remake + && !flags.childMade + && !flags.force + && !flags.doneWait + && !flags.doneOrder + && !flags.fromDepend + && !flags.doneAllsrc + && !flags.cycle + && !flags.doneCycle; +} + /* Print the contents of a node. */ void Targ_PrintNode(GNode *gn, int pass) { debug_printf("# %s%s", gn->name, gn->cohort_num); GNode_FprintDetails(opts.debug_file, ", ", gn, "\n"); - if (gn->flags == 0) + if (GNodeFlags_IsNone(gn->flags)) return; if (!GNode_IsTarget(gn)) return; debug_printf("#\n"); if (gn == mainTarg) debug_printf("# *** MAIN TARGET ***\n"); if (pass >= 2) { if (gn->unmade > 0) debug_printf("# %d unmade children\n", gn->unmade); else debug_printf("# No unmade children\n"); if (!(gn->type & (OP_JOIN | OP_USE | OP_USEBEFORE | OP_EXEC))) { if (gn->mtime != 0) { debug_printf("# last modified %s: %s\n", Targ_FmtTime(gn->mtime), GNodeMade_Name(gn->made)); } else if (gn->made != UNMADE) { debug_printf("# nonexistent (maybe): %s\n", GNodeMade_Name(gn->made)); } else debug_printf("# unmade\n"); } PrintNodeNamesLine("implicit parents", &gn->implicitParents); } else { if (gn->unmade != 0) debug_printf("# %d unmade children\n", gn->unmade); } PrintNodeNamesLine("parents", &gn->parents); PrintNodeNamesLine("order_pred", &gn->order_pred); PrintNodeNamesLine("order_succ", &gn->order_succ); debug_printf("%-16s%s", gn->name, GNode_OpName(gn)); Targ_PrintType(gn->type); PrintNodeNames(&gn->children); debug_printf("\n"); Targ_PrintCmds(gn); debug_printf("\n\n"); if (gn->type & OP_DOUBLEDEP) Targ_PrintNodes(&gn->cohorts, pass); } void Targ_PrintNodes(GNodeList *gnodes, int pass) { GNodeListNode *ln; for (ln = gnodes->first; ln != NULL; ln = ln->next) Targ_PrintNode(ln->datum, pass); } /* Print only those targets that are just a source. */ static void PrintOnlySources(void) { GNodeListNode *ln; for (ln = allTargets.first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; if (GNode_IsTarget(gn)) continue; debug_printf("#\t%s [%s]", gn->name, GNode_Path(gn)); Targ_PrintType(gn->type); debug_printf("\n"); } } /* * Input: * pass 1 => before processing * 2 => after processing * 3 => after processing, an error occurred */ void Targ_PrintGraph(int pass) { debug_printf("#*** Input graph:\n"); Targ_PrintNodes(&allTargets, pass); debug_printf("\n"); debug_printf("\n"); debug_printf("#\n"); debug_printf("# Files that are only sources:\n"); PrintOnlySources(); debug_printf("#*** Global Variables:\n"); Var_Dump(SCOPE_GLOBAL); debug_printf("#*** Command-line Variables:\n"); Var_Dump(SCOPE_CMDLINE); debug_printf("\n"); Dir_PrintDirectories(); debug_printf("\n"); Suff_PrintAll(); } /* * Propagate some type information to cohort nodes (those from the '::' * dependency operator). * * Should be called after the makefiles are parsed but before any action is * taken. */ void Targ_Propagate(void) { GNodeListNode *ln, *cln; for (ln = allTargets.first; ln != NULL; ln = ln->next) { GNode *gn = ln->datum; GNodeType type = gn->type; if (!(type & OP_DOUBLEDEP)) continue; for (cln = gn->cohorts.first; cln != NULL; cln = cln->next) { GNode *cohort = cln->datum; cohort->type |= type & ~OP_OPMASK; } } } diff --git a/contrib/bmake/trace.c b/contrib/bmake/trace.c index 840c7995e5c1..8e2c507d14dc 100644 --- a/contrib/bmake/trace.c +++ b/contrib/bmake/trace.c @@ -1,111 +1,111 @@ -/* $NetBSD: trace.c,v 1.28 2021/02/05 05:15:12 rillig Exp $ */ +/* $NetBSD: trace.c,v 1.29 2021/09/21 23:06:18 rillig Exp $ */ /* * Copyright (c) 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Bill Sommerfeld * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * trace.c -- * handle logging of trace events generated by various parts of make. * * Interface: * Trace_Init Initialize tracing (called once during * the lifetime of the process) * * Trace_End Finalize tracing (called before make exits) * * Trace_Log Log an event about a particular make job. */ #include #include "make.h" #include "job.h" #include "trace.h" -MAKE_RCSID("$NetBSD: trace.c,v 1.28 2021/02/05 05:15:12 rillig Exp $"); +MAKE_RCSID("$NetBSD: trace.c,v 1.29 2021/09/21 23:06:18 rillig Exp $"); static FILE *trfile; static pid_t trpid; const char *trwd; -static const char *evname[] = { +static const char evname[][4] = { "BEG", "END", "ERR", "JOB", "DON", "INT", }; void Trace_Init(const char *pathname) { if (pathname != NULL) { FStr curDir; trpid = getpid(); /* XXX: This variable may get overwritten later, which * would make trwd point to undefined behavior. */ curDir = Var_Value(SCOPE_GLOBAL, ".CURDIR"); trwd = curDir.str; trfile = fopen(pathname, "a"); } } void Trace_Log(TrEvent event, Job *job) { struct timeval rightnow; if (trfile == NULL) return; gettimeofday(&rightnow, NULL); fprintf(trfile, "%lld.%06ld %d %s %d %s", (long long)rightnow.tv_sec, (long)rightnow.tv_usec, jobTokensRunning, evname[event], trpid, trwd); if (job != NULL) { char flags[4]; Job_FlagsToString(job, flags, sizeof flags); fprintf(trfile, " %s %d %s %x", job->node->name, job->pid, flags, job->node->type); } fputc('\n', trfile); fflush(trfile); } void Trace_End(void) { if (trfile != NULL) fclose(trfile); } diff --git a/contrib/bmake/unit-tests/Makefile b/contrib/bmake/unit-tests/Makefile index 784223a56652..98ed3907cd5a 100644 --- a/contrib/bmake/unit-tests/Makefile +++ b/contrib/bmake/unit-tests/Makefile @@ -1,753 +1,802 @@ -# $Id: Makefile,v 1.148 2021/06/16 19:18:56 sjg Exp $ +# $Id: Makefile,v 1.164 2021/12/12 22:50:00 sjg Exp $ # -# $NetBSD: Makefile,v 1.279 2021/06/16 09:39:48 rillig Exp $ +# $NetBSD: Makefile,v 1.288 2021/12/12 22:16:48 rillig Exp $ # # Unit tests for make(1) # # The main targets are: # # all: # run all the tests # test: # run 'all', and compare to expected results # accept: # move generated output to expected results # # Settable variables # # TEST_MAKE # The make program to be tested. # # # Adding a test case # # Each feature should get its own set of tests in its own suitably # named makefile (*.mk), with its own set of expected results (*.exp), # and it should be added to the TESTS list. # # A few *.mk files are helper files for other tests (such as include-sub.mk) # and are thus not added to TESTS. Such files must be ignored in # src/tests/usr.bin/make/t_make.sh. # .MAIN: all # we use these below but we might be an older make .MAKE.OS?= ${uname -s:L:sh} .MAKE.UID?= ${id -u:L:sh} # Each test is in a sub-makefile. # Keep the list sorted. # Any test that is commented out must be ignored in # src/tests/usr.bin/make/t_make.sh as well. #TESTS+= archive #TESTS+= archive-suffix TESTS+= cmd-errors TESTS+= cmd-errors-jobs TESTS+= cmd-errors-lint TESTS+= cmd-interrupt TESTS+= cmdline TESTS+= cmdline-redirect-stdin TESTS+= cmdline-undefined TESTS+= comment TESTS+= compat-error TESTS+= cond-cmp-numeric TESTS+= cond-cmp-numeric-eq TESTS+= cond-cmp-numeric-ge TESTS+= cond-cmp-numeric-gt TESTS+= cond-cmp-numeric-le TESTS+= cond-cmp-numeric-lt TESTS+= cond-cmp-numeric-ne TESTS+= cond-cmp-string TESTS+= cond-cmp-unary TESTS+= cond-eof TESTS+= cond-func TESTS+= cond-func-commands TESTS+= cond-func-defined TESTS+= cond-func-empty TESTS+= cond-func-exists TESTS+= cond-func-make TESTS+= cond-func-make-main TESTS+= cond-func-target TESTS+= cond-late TESTS+= cond-op TESTS+= cond-op-and TESTS+= cond-op-and-lint TESTS+= cond-op-not TESTS+= cond-op-or TESTS+= cond-op-or-lint TESTS+= cond-op-parentheses TESTS+= cond-short TESTS+= cond-token-number TESTS+= cond-token-plain TESTS+= cond-token-string TESTS+= cond-token-var TESTS+= cond-undef-lint TESTS+= cond1 TESTS+= counter TESTS+= counter-append TESTS+= dep TESTS+= dep-colon TESTS+= dep-colon-bug-cross-file TESTS+= dep-double-colon TESTS+= dep-double-colon-indep TESTS+= dep-exclam TESTS+= dep-none TESTS+= dep-percent TESTS+= dep-var TESTS+= dep-wildcards TESTS+= depsrc TESTS+= depsrc-end TESTS+= depsrc-exec TESTS+= depsrc-ignore TESTS+= depsrc-made TESTS+= depsrc-make TESTS+= depsrc-meta TESTS+= depsrc-nometa TESTS+= depsrc-nometa_cmp TESTS+= depsrc-nopath TESTS+= depsrc-notmain TESTS+= depsrc-optional TESTS+= depsrc-phony TESTS+= depsrc-precious TESTS+= depsrc-recursive TESTS+= depsrc-silent TESTS+= depsrc-use TESTS+= depsrc-usebefore TESTS+= depsrc-usebefore-double-colon TESTS+= depsrc-wait TESTS+= deptgt TESTS+= deptgt-begin TESTS+= deptgt-begin-fail TESTS+= deptgt-begin-fail-indirect TESTS+= deptgt-default TESTS+= deptgt-delete_on_error TESTS+= deptgt-end TESTS+= deptgt-end-fail TESTS+= deptgt-end-fail-all TESTS+= deptgt-end-fail-indirect TESTS+= deptgt-end-jobs TESTS+= deptgt-error TESTS+= deptgt-ignore TESTS+= deptgt-interrupt TESTS+= deptgt-main TESTS+= deptgt-makeflags TESTS+= deptgt-no_parallel TESTS+= deptgt-nopath TESTS+= deptgt-notparallel TESTS+= deptgt-objdir TESTS+= deptgt-order TESTS+= deptgt-path TESTS+= deptgt-path-suffix TESTS+= deptgt-phony TESTS+= deptgt-precious TESTS+= deptgt-shell TESTS+= deptgt-silent TESTS+= deptgt-stale TESTS+= deptgt-suffixes TESTS+= dir TESTS+= dir-expand-path TESTS+= directive TESTS+= directive-dinclude TESTS+= directive-elif TESTS+= directive-elifdef TESTS+= directive-elifmake TESTS+= directive-elifndef TESTS+= directive-elifnmake TESTS+= directive-else TESTS+= directive-endfor TESTS+= directive-endif TESTS+= directive-error TESTS+= directive-export TESTS+= directive-export-env TESTS+= directive-export-impl TESTS+= directive-export-gmake TESTS+= directive-export-literal TESTS+= directive-for TESTS+= directive-for-errors TESTS+= directive-for-escape TESTS+= directive-for-generating-endif +TESTS+= directive-for-if TESTS+= directive-for-lines TESTS+= directive-for-null TESTS+= directive-hyphen-include TESTS+= directive-if TESTS+= directive-if-nested TESTS+= directive-ifdef TESTS+= directive-ifmake TESTS+= directive-ifndef TESTS+= directive-ifnmake TESTS+= directive-include TESTS+= directive-include-fatal TESTS+= directive-info TESTS+= directive-misspellings TESTS+= directive-sinclude TESTS+= directive-undef TESTS+= directive-unexport TESTS+= directive-unexport-env TESTS+= directive-warning TESTS+= dollar TESTS+= doterror TESTS+= dotwait TESTS+= envfirst TESTS+= error TESTS+= # escape # broken by reverting POSIX changes TESTS+= export TESTS+= export-all TESTS+= export-env TESTS+= export-variants TESTS+= forloop TESTS+= forsubst TESTS+= gnode-submake TESTS+= hanoi-include TESTS+= impsrc TESTS+= include-main TESTS+= job-flags #TESTS+= job-output-long-lines TESTS+= job-output-null TESTS+= jobs-empty-commands TESTS+= jobs-empty-commands-error TESTS+= jobs-error-indirect TESTS+= jobs-error-nested TESTS+= jobs-error-nested-make TESTS+= lint TESTS+= make-exported TESTS+= meta-cmd-cmp TESTS+= moderrs TESTS+= modmatch TESTS+= modmisc TESTS+= modts TESTS+= modword .if ${.MAKE.UID} > 0 TESTS+= objdir-writable .endif TESTS+= opt TESTS+= opt-backwards TESTS+= opt-chdir TESTS+= opt-debug TESTS+= opt-debug-all TESTS+= opt-debug-archive TESTS+= opt-debug-curdir TESTS+= opt-debug-cond TESTS+= opt-debug-dir TESTS+= opt-debug-errors TESTS+= opt-debug-errors-jobs TESTS+= opt-debug-file TESTS+= opt-debug-for TESTS+= opt-debug-graph1 TESTS+= opt-debug-graph2 TESTS+= opt-debug-graph3 TESTS+= opt-debug-hash #TESTS+= opt-debug-jobs TESTS+= opt-debug-lint TESTS+= opt-debug-loud TESTS+= opt-debug-meta TESTS+= opt-debug-making TESTS+= opt-debug-no-rm TESTS+= opt-debug-parse TESTS+= opt-debug-suff TESTS+= opt-debug-targets TESTS+= opt-debug-varraw TESTS+= opt-debug-var TESTS+= opt-debug-x-trace TESTS+= opt-define TESTS+= opt-env TESTS+= opt-file TESTS+= opt-ignore TESTS+= opt-include-dir TESTS+= opt-jobs TESTS+= opt-jobs-internal TESTS+= opt-jobs-no-action TESTS+= opt-keep-going TESTS+= opt-keep-going-multiple TESTS+= opt-m-include-dir TESTS+= opt-no-action TESTS+= opt-no-action-at-all TESTS+= opt-no-action-runflags TESTS+= opt-no-action-touch TESTS+= opt-query TESTS+= opt-raw TESTS+= opt-silent TESTS+= opt-touch TESTS+= opt-touch-jobs TESTS+= opt-tracefile TESTS+= opt-var-expanded TESTS+= opt-var-literal TESTS+= opt-warnings-as-errors TESTS+= opt-where-am-i TESTS+= opt-x-reduce-exported TESTS+= order TESTS+= parse-var TESTS+= phony-end TESTS+= posix TESTS+= # posix1 # broken by reverting POSIX changes TESTS+= recursive TESTS+= sh TESTS+= sh-dots TESTS+= sh-errctl TESTS+= sh-flags TESTS+= sh-jobs TESTS+= sh-jobs-error TESTS+= sh-leading-at TESTS+= sh-leading-hyphen TESTS+= sh-leading-plus TESTS+= sh-meta-chars TESTS+= sh-multi-line TESTS+= sh-single-line TESTS+= shell-csh TESTS+= shell-custom .if exists(/bin/ksh) TESTS+= shell-ksh .endif TESTS+= shell-sh TESTS+= suff-add-later TESTS+= suff-clear-regular TESTS+= suff-clear-single TESTS+= suff-incomplete TESTS+= suff-lookup TESTS+= suff-main TESTS+= suff-main-several TESTS+= suff-phony TESTS+= suff-rebuild TESTS+= suff-self TESTS+= suff-transform-debug TESTS+= suff-transform-endless TESTS+= suff-transform-expand TESTS+= suff-transform-select TESTS+= sunshcmd TESTS+= ternary TESTS+= unexport TESTS+= unexport-env TESTS+= use-inference TESTS+= var-class TESTS+= var-class-cmdline TESTS+= var-class-env TESTS+= var-class-global TESTS+= var-class-local TESTS+= var-class-local-legacy TESTS+= var-eval-short TESTS+= var-op TESTS+= var-op-append TESTS+= var-op-assign TESTS+= var-op-default TESTS+= var-op-expand TESTS+= var-op-shell TESTS+= var-op-sunsh TESTS+= var-recursive TESTS+= varcmd TESTS+= vardebug TESTS+= varfind TESTS+= varmisc TESTS+= varmod TESTS+= varmod-assign TESTS+= varmod-defined TESTS+= varmod-edge TESTS+= varmod-exclam-shell TESTS+= varmod-extension TESTS+= varmod-gmtime TESTS+= varmod-hash TESTS+= varmod-head TESTS+= varmod-ifelse TESTS+= varmod-indirect TESTS+= varmod-l-name-to-value TESTS+= varmod-localtime TESTS+= varmod-loop +TESTS+= varmod-loop-delete TESTS+= varmod-loop-varname TESTS+= varmod-match TESTS+= varmod-match-escape TESTS+= varmod-no-match TESTS+= varmod-order +TESTS+= varmod-order-numeric TESTS+= varmod-order-reverse TESTS+= varmod-order-shuffle +TESTS+= varmod-order-string TESTS+= varmod-path TESTS+= varmod-quote TESTS+= varmod-quote-dollar TESTS+= varmod-range TESTS+= varmod-remember TESTS+= varmod-root TESTS+= varmod-select-words TESTS+= varmod-shell TESTS+= varmod-subst TESTS+= varmod-subst-regex TESTS+= varmod-sun-shell TESTS+= varmod-sysv TESTS+= varmod-tail TESTS+= varmod-to-abs TESTS+= varmod-to-lower TESTS+= varmod-to-many-words TESTS+= varmod-to-one-word TESTS+= varmod-to-separator TESTS+= varmod-to-upper TESTS+= varmod-undefined TESTS+= varmod-unique TESTS+= varname TESTS+= varname-dollar TESTS+= varname-dot-alltargets TESTS+= varname-dot-curdir TESTS+= varname-dot-includes TESTS+= varname-dot-includedfromdir TESTS+= varname-dot-includedfromfile TESTS+= varname-dot-libs TESTS+= varname-dot-make-dependfile TESTS+= varname-dot-make-expand_variables TESTS+= varname-dot-make-exported TESTS+= varname-dot-make-jobs TESTS+= varname-dot-make-jobs-prefix TESTS+= varname-dot-make-level TESTS+= varname-dot-make-makefile_preference TESTS+= varname-dot-make-makefiles TESTS+= varname-dot-make-meta-bailiwick TESTS+= varname-dot-make-meta-created TESTS+= varname-dot-make-meta-files TESTS+= varname-dot-make-meta-ignore_filter TESTS+= varname-dot-make-meta-ignore_paths TESTS+= varname-dot-make-meta-ignore_patterns TESTS+= varname-dot-make-meta-prefix TESTS+= varname-dot-make-mode TESTS+= varname-dot-make-path_filemon TESTS+= varname-dot-make-pid TESTS+= varname-dot-make-ppid TESTS+= varname-dot-make-save_dollars TESTS+= varname-dot-makeflags TESTS+= varname-dot-makeoverrides TESTS+= varname-dot-newline TESTS+= varname-dot-objdir TESTS+= varname-dot-parsedir TESTS+= varname-dot-parsefile TESTS+= varname-dot-path TESTS+= varname-dot-shell +TESTS+= varname-dot-suffixes TESTS+= varname-dot-targets TESTS+= varname-empty TESTS+= varname-make TESTS+= varname-make_print_var_on_error TESTS+= varname-make_print_var_on_error-jobs TESTS+= varname-makefile TESTS+= varname-makeflags TESTS+= varname-pwd TESTS+= varname-vpath TESTS+= varparse-dynamic TESTS+= varparse-errors TESTS+= varparse-mod TESTS+= varparse-undef-partial TESTS+= varquote +# for now at least +.if ${.SHELL:T} == "ksh" +BROKEN_TESTS+= sh-flags +.endif +.if ${.MAKE.OS:NDarwin} == "" +BROKEN_TESTS+= shell-ksh +.endif +.if ${.MAKE.OS} == "SCO_SV" +BROKEN_TESTS+= \ + opt-debug-graph[23] \ + varmod-localtime \ + varmod-to-separator \ + +.if ${.SHELL:T} == "bash" +BROKEN_TESTS+= job-output-null +.else +BROKEN_TESTS+= \ + cmd-interrupt \ + job-flags \ + +.endif +.endif + +# Some tests just do not work on some platforms or environments +# so allow for some filtering. +.if !empty(BROKEN_TESTS) +.warning Skipping broken tests: ${BROKEN_TESTS:O:u} +TESTS:= ${TESTS:${BROKEN_TESTS:S,^,N,:ts:}} +.endif + # Ideas for more tests: # char-0020-space.mk # char-005C-backslash.mk # escape-cond-str.mk # escape-cond-func-arg.mk -# escape-cond-func-arg.mk # escape-varmod.mk # escape-varmod-define.mk # escape-varmod-match.mk # escape-varname.mk # escape-varassign-varname.mk # escape-varassign-varname-cmdline.mk # escape-varassign-value.mk # escape-varassign-value-cmdline.mk # escape-dependency-source.mk # escape-dependency-target.mk # escape-for-varname.mk # escape-for-item.mk # posix-*.mk (see posix.mk and posix1.mk) # Additional environment variables for some of the tests. # The base environment is -i PATH="$PATH". ENV.depsrc-optional+= TZ=UTC ENV.envfirst= FROM_ENV=value-from-env ENV.varmisc= FROM_ENV=env ENV.varmisc+= FROM_ENV_BEFORE=env ENV.varmisc+= FROM_ENV_AFTER=env -ENV.varmod-localtime+= TZ=Europe/Berlin +ENV.varmod-localtime+= TZ=${UTC_1:UEurope/Berlin} ENV.varname-vpath+= VPATH=varname-vpath.dir:varname-vpath.dir2 # Override make flags for some of the tests; default is -k. # If possible, write ".MAKEFLAGS: -dv" in the test .mk file instead of # settings FLAGS.test=-dv here, since that is closer to the test code. FLAGS.cond-func-make= via-cmdline FLAGS.directive-ifmake= first second FLAGS.doterror= # none, especially not -k FLAGS.jobs-error-indirect= # none, especially not -k FLAGS.jobs-error-nested= # none, especially not -k FLAGS.jobs-error-nested-make= # none, especially not -k FLAGS.varname-empty= -dv '$${:U}=cmdline-u' '=cmdline-plain' # Some tests need extra postprocessing. SED_CMDS.dir= ${:D remove output from -DCLEANUP mode } SED_CMDS.dir+= -e '/^OpenDirs_Done:/d' SED_CMDS.dir+= -e '/^CachedDir /d' SED_CMDS.export= -e '/^[^=_A-Za-z0-9]*=/d' SED_CMDS.export-all= ${SED_CMDS.export} SED_CMDS.export-env= ${SED_CMDS.export} SED_CMDS.cmdline= -e 's,uid${.MAKE.UID}/,,' SED_CMDS.job-output-long-lines= \ ${:D Job separators on their own line are ok. } \ -e '/^--- job-[ab] ---$$/d' \ ${:D Plain output lines are ok as well. } \ ${:D They may come in multiples of 1024 or as 10000. } \ -e '/^aa*$$/d' \ -e '/^bb*$$/d' \ ${:D The following lines should rather not occur since the job } \ ${:D marker should always be at the beginning of the line. } \ -e '/^aa*--- job-b ---$$/d' \ -e '/^bb*--- job-a ---$$/d' -SED_CMDS.opt-chdir= -e 's,\(nonexistent\).[1-9][0-9]*,\1,' +SED_CMDS.opt-chdir= -e 's,\(nonexistent\).[1-9][0-9]*,\1,' \ + -e '/name/s,file,File,' \ + -e 's,no such,No such,' \ + -e 's,Filename,File name,' SED_CMDS.opt-debug-graph1= ${STD_SED_CMDS.dg1} SED_CMDS.opt-debug-graph2= ${STD_SED_CMDS.dg2} SED_CMDS.opt-debug-graph3= ${STD_SED_CMDS.dg3} SED_CMDS.opt-debug-jobs= -e 's,([0-9][0-9]*),(),' SED_CMDS.opt-debug-jobs+= -e 's,pid [0-9][0-9]*,pid ,' SED_CMDS.opt-debug-jobs+= -e 's,Process [0-9][0-9]*,Process ,' SED_CMDS.opt-debug-jobs+= -e 's,JobFinish: [0-9][0-9]*,JobFinish: ,' SED_CMDS.opt-debug-jobs+= -e 's,Command: ${.SHELL:T},Command: ,' # The "-q" may be there or not, see jobs.c, variable shells. SED_CMDS.opt-debug-jobs+= -e 's,^\(.Command: \) -q,\1,' SED_CMDS.opt-debug-lint+= ${STD_SED_CMDS.regex} SED_CMDS.opt-jobs-no-action= ${STD_SED_CMDS.hide-from-output} SED_CMDS.opt-no-action-runflags= ${STD_SED_CMDS.hide-from-output} # For Compat_RunCommand, useShell == false. SED_CMDS.sh-dots= -e 's,^.*\.\.\.:.*,,' # For Compat_RunCommand, useShell == true. SED_CMDS.sh-dots+= -e 's,^make: exec(\(.*\)) failed (.*)$$,,' SED_CMDS.sh-dots+= -e 's,^\(\*\*\* Error code \)[1-9][0-9]*,\1,' SED_CMDS.sh-errctl= ${STD_SED_CMDS.dj} SED_CMDS.sh-flags= ${STD_SED_CMDS.hide-from-output} +SED_CMDS.shell-csh= ${STD_SED_CMDS.white-space} SED_CMDS.suff-main+= ${STD_SED_CMDS.dg1} SED_CMDS.suff-main-several+= ${STD_SED_CMDS.dg1} SED_CMDS.suff-transform-debug+= ${STD_SED_CMDS.dg1} SED_CMDS.var-op-shell+= ${STD_SED_CMDS.shell} SED_CMDS.var-op-shell+= -e '/command/s,No such.*,not found,' +SED_CMDS.var-op-shell+= ${STD_SED_CMDS.white-space} SED_CMDS.vardebug+= -e 's,${.SHELL},,' SED_CMDS.varmod-subst-regex+= ${STD_SED_CMDS.regex} SED_CMDS.varname-dot-parsedir= -e '/in some cases/ s,^make: "[^"]*,make: ",' SED_CMDS.varname-dot-parsefile= -e '/in some cases/ s,^make: "[^"]*,make: ",' SED_CMDS.varname-dot-shell= -e 's, = /[^ ]*, = (details omitted),g' SED_CMDS.varname-dot-shell+= -e 's,"/[^" ]*","(details omitted)",g' SED_CMDS.varname-dot-shell+= -e 's,\[/[^] ]*\],[(details omitted)],g' -SED_CMDS.varname-empty= -e 's,${.CURDIR},,g' -SED_CMDS.varname-empty+= -e '/\.PARSEDIR/d' -SED_CMDS.varname-empty+= -e '/\.SHELL/d' +SED_CMDS.varname-empty= ${.OBJDIR .PARSEDIR .PATH .SHELL:L:@v@-e '/\\$v/d'@} # Some tests need an additional round of postprocessing. POSTPROC.deptgt-suffixes= awk '/^\#\*\*\* Suffixes/,/^never-stop/' POSTPROC.gnode-submake= awk '/Input graph/, /^$$/' # Some tests reuse other tests, which makes them unnecessarily fragile. export-all.rawout: export.mk unexport.rawout: export.mk unexport-env.rawout: export.mk # End of the configuration section. # Some standard sed commands, to be used in the SED_CMDS above. # Omit details such as process IDs from the output of the -dg1 option. -STD_SED_CMDS.dg1= -e 's,${.CURDIR}$$,,' +STD_SED_CMDS.dg1= -e '/\#.* \.$$/d' STD_SED_CMDS.dg1+= -e '/\.MAKE.PATH_FILEMON/d' STD_SED_CMDS.dg1+= -e '/^MAKE_VERSION/d;/^\#.*\/mk/d' STD_SED_CMDS.dg1+= -e 's, ${DEFSYSPATH:U/usr/share/mk}$$, ,' STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE *=\) .*,\1
,' STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE\.[A-Z_]* *=\) .*,\1
,' STD_SED_CMDS.dg1+= -e 's,^\(MACHINE[_ARCH]* *=\) .*,\1
,' STD_SED_CMDS.dg1+= -e 's,^\(MAKE *=\) .*,\1
,' STD_SED_CMDS.dg1+= -e 's,^\(\.SHELL *=\) .*,\1
,' STD_SED_CMDS.dg2= ${STD_SED_CMDS.dg1} STD_SED_CMDS.dg2+= -e 's,\(last modified\) ..:..:.. ... ..\, ....,\1 ,' STD_SED_CMDS.dg3= ${STD_SED_CMDS.dg2} # Omit details such as process IDs from the output of the -dj option. STD_SED_CMDS.dj= \ -e '/Process/d;/JobFinish:/d' \ -e 's,^\(Job_TokenWithdraw\)([0-9]*),\1(),' \ -e 's,^([0-9][0-9]*) \(withdrew token\),() \1,' \ -e 's, \(pid\) [0-9][0-9]*, \1 ,' \ -e 's,^\( Command:\) .*,\1 ,' # Reduce the noise for tests running with the -n option, since there is no # other way to suppress the echoing of the commands. STD_SED_CMDS.hide-from-output= \ -e '/^echo hide-from-output/d' \ -e 's,hide-from-output ,,' \ -e 's,hide-from-output,,' # Normalize the output for error messages from the shell. # # $shell -c '...' # NetBSD sh ...: not found # NetBSD ksh ksh: ...: not found # bash 5.0.18 bash: ...: command not found # bash 5.1.0 bash: line 1: ...: command not found # dash dash: 1: ...: not found # # $shell -c '< /nonexistent' # NetBSD sh sh: cannot open /nonexistent: no such file # NetBSD ksh ksh: cannot open /nonexistent: No such file or directory # bash 5.0.18 bash: /nonexistent: No such file or directory # bash 5.1.0 bash: line 1: /nonexistent: No such file or directory # dash dash: 1: cannot open /nonexistent: No such file # # echo '< /nonexistent' | $shell # NetBSD sh sh: cannot open /nonexistent: no such file # NetBSD ksh ksh: [1]: cannot open /nonexistent: No such file or directory # bash 5.0.18 bash: line 1: /nonexistent: No such file or directory # bash 5.1.0 bash: line 1: /nonexistent: No such file or directory # dash dash: 1: cannot open /nonexistent: No such file # STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: line [0-9][0-9]*: ,,' STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: [0-9][0-9]*: ,,' STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: ,,' +STD_SED_CMDS.white-space= -e 's, *, ,g' -e 's, *$$,,' + # The actual error messages for a failed regcomp or regexec differ between the # implementations. STD_SED_CMDS.regex= \ -e 's,\(Regex compilation error:\).*,\1 (details omitted),' # End of the configuration helpers section. .-include "Makefile.inc" .-include "Makefile.config" UNIT_TESTS:= ${.PARSEDIR} .PATH: ${UNIT_TESTS} .if ${USE_ABSOLUTE_TESTNAMES:Uno} == yes OUTFILES= ${TESTS:@test@${.CURDIR:tA}/${test}.out@} .else OUTFILES= ${TESTS:=.out} .endif all: ${OUTFILES} CLEANFILES= *.rawout *.out *.status *.tmp *.core *.tmp CLEANFILES+= obj*.[och] lib*.a # posix1.mk CLEANFILES+= issue* .[ab]* # suffixes.mk CLEANDIRS= dir dummy # posix1.mk clean: rm -f ${CLEANFILES} rm -rf ${CLEANDIRS} TEST_MAKE?= ${.MAKE} TOOL_SED?= sed TOOL_TR?= tr TOOL_DIFF?= diff DIFF_FLAGS?= -u .if defined(.PARSEDIR) # ensure consistent results from sort(1) LC_ALL= C LANG= C .export LANG LC_ALL .endif .if ${.MAKE.MODE:Unormal:Mmeta} != "" # we don't need the noise _MKMSG_TEST= : .endif # for many tests we need a TMPDIR that will not collide # with other users. .if ${.OBJDIR} != ${.CURDIR} # easy TMPDIR:= ${.OBJDIR}/tmp .elif defined(TMPDIR) TMPDIR:= ${TMPDIR}/uid${.MAKE.UID} .else TMPDIR:= /tmp/uid${.MAKE.UID} .endif # make sure it exists .if !exist(${TMPDIR}) x!= echo; mkdir -p ${TMPDIR} .endif -MAKE_TEST_ENV?= MALLOC_OPTIONS="JA" # for jemalloc +MAKE_TEST_ENV= MALLOC_OPTIONS="JA" # for jemalloc 100 +MAKE_TEST_ENV+= MALLOC_CONF="junk:true" # for jemalloc 510 MAKE_TEST_ENV+= TMPDIR=${TMPDIR} .if ${.MAKE.OS} == "NetBSD" LIMIT_RESOURCES?= ulimit -v 200000 .endif LIMIT_RESOURCES?= : # Each test is run in a sub-make, to keep the tests for interfering with # each other, and because they use different environment variables and # command line options. .SUFFIXES: .mk .rawout .out .mk.rawout: @${_MKMSG_TEST:Uecho '# test '} ${.PREFIX} @set -eu; \ ${LIMIT_RESOURCES}; \ cd ${.OBJDIR}; \ env -i PATH="$$PATH" ${MAKE_TEST_ENV} ${ENV.${.PREFIX:T}} \ ${TEST_MAKE} \ -r -C ${.CURDIR} -f ${.IMPSRC} \ ${FLAGS.${.PREFIX:T}:U-k} \ > ${.TARGET}.tmp 2>&1 \ && status=$$? || status=$$?; \ echo $$status > ${.TARGET:R}.status @mv ${.TARGET}.tmp ${.TARGET} # Postprocess the test output so that the results can be compared. # # always pretend .MAKE was called 'make' _SED_CMDS+= -e 's,^${TEST_MAKE:T:S,.,\\.,g}[][0-9]*:,make:,' _SED_CMDS+= -e 's,${TEST_MAKE:S,.,\\.,g},make,' _SED_CMDS+= -e 's,${TEST_MAKE:T:S,.,\\.,g}[][0-9]* warning,make warning,' _SED_CMDS+= -e 's,^usage: ${TEST_MAKE:T:S,.,\\.,g} ,usage: make ,' # replace anything after 'stopped in' with unit-tests _SED_CMDS+= -e '/stopped/s, /.*, unit-tests,' _SED_CMDS+= -e 's,${TMPDIR},TMPDIR,g' -# strip ${.CURDIR}/ from the output -_SED_CMDS+= -e 's,${.CURDIR:S,.,\\.,g}/,,g' +# canonicalize ${.OBJDIR} and ${.CURDIR} +.if ${.OBJDIR} != ${.CURDIR} +# yes this is inaccurate but none of the tests expect anywhere +# which we get depending on how MAKEOBJDIR is set. +_SED_CMDS+= -e 's,${.OBJDIR},,g' +.endif +_SED_CMDS+= -e 's,${.CURDIR},,g' +_SED_CMDS+= -e 's,/,,g' _SED_CMDS+= -e 's,${UNIT_TESTS:S,.,\\.,g}/,,g' -# on AT&T derrived systems; false exits 255 not 1 +# on AT&T derived systems: false exits 255 not 1 .if ${.MAKE.OS:N*BSD} != "" _SED_CMDS+= -e 's,\(Error code\) 255,\1 1,' .endif +.if ${.SHELL:T} == "ksh" +_SED_CMDS+= -e '/^set [+-]v/d' +.endif .rawout.out: @${TOOL_SED} ${_SED_CMDS} ${SED_CMDS.${.PREFIX:T}} \ < ${.IMPSRC} > ${.TARGET}.tmp1 @${POSTPROC.${.PREFIX:T}:Ucat} < ${.TARGET}.tmp1 > ${.TARGET}.tmp2 @rm ${.TARGET}.tmp1 @echo "exit status `cat ${.TARGET:R}.status`" >> ${.TARGET}.tmp2 @mv ${.TARGET}.tmp2 ${.TARGET} .if empty(DIFF_FLAGS) DIFF_ECHO= echo .else DIFF_ECHO= : .endif # Compare all output files test: ${OUTFILES} .PHONY @failed= ; \ for test in ${TESTS}; do \ cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out && continue || \ ${DIFF_ECHO} diff ${UNIT_TESTS}/$${test}.exp $${test}.out; \ ${TOOL_DIFF} ${DIFF_FLAGS} ${UNIT_TESTS}/$${test}.exp $${test}.out \ || failed="$${failed}$${failed:+ }$${test}" ; \ done ; \ if [ -n "$${failed}" ]; then \ echo "Failed tests: $${failed}" ; false ; \ else \ echo "All tests passed" ; \ fi accept: @for test in ${TESTS}; do \ cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out \ || { echo "Replacing $${test}.exp" ; \ cp $${test}.out ${UNIT_TESTS}/$${test}.exp ; } \ done .if exists(${TEST_MAKE}) ${TESTS:=.rawout}: ${TEST_MAKE} # in meta mode, we *know* if a target script is impacted # by a makefile change. .if ${.MAKE.MODE:Unormal:Mmeta} == "" ${TESTS:=.rawout}: ${.PARSEDIR}/Makefile .endif .endif .-include diff --git a/contrib/bmake/unit-tests/Makefile.config.in b/contrib/bmake/unit-tests/Makefile.config.in index 0fe24f08d2f9..3139a0d4d0b5 100644 --- a/contrib/bmake/unit-tests/Makefile.config.in +++ b/contrib/bmake/unit-tests/Makefile.config.in @@ -1,4 +1,6 @@ -# $Id: Makefile.config.in,v 1.1 2018/12/30 17:14:24 sjg Exp $ +# $Id: Makefile.config.in,v 1.3 2021/10/22 07:48:57 sjg Exp $ srcdir= @srcdir@ +TOOL_DIFF?= @diff@ DIFF_FLAGS?= @diff_u@ +UTC_1= @UTC_1@ diff --git a/contrib/bmake/unit-tests/cond-cmp-numeric.exp b/contrib/bmake/unit-tests/cond-cmp-numeric.exp index 4a97b6879e7a..d10262aa8823 100644 --- a/contrib/bmake/unit-tests/cond-cmp-numeric.exp +++ b/contrib/bmake/unit-tests/cond-cmp-numeric.exp @@ -1,11 +1,15 @@ CondParser_Eval: !(${:UINF} > 1e100) make: "cond-cmp-numeric.mk" line 11: String comparison operator must be either == or != CondParser_Eval: ${:UNaN} > NaN make: "cond-cmp-numeric.mk" line 16: String comparison operator must be either == or != CondParser_Eval: !(${:UNaN} == NaN) lhs = "NaN", rhs = "NaN", op = == CondParser_Eval: 123 ! 123 make: "cond-cmp-numeric.mk" line 34: Malformed conditional (123 ! 123) +CondParser_Eval: ${:U 123} < 124 +lhs = 123.000000, rhs = 124.000000, op = < +CondParser_Eval: ${:U123 } < 124 +make: "cond-cmp-numeric.mk" line 50: String comparison operator must be either == or != make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-cmp-numeric.mk b/contrib/bmake/unit-tests/cond-cmp-numeric.mk index b1ec3e719d47..b34e5bfc0a06 100644 --- a/contrib/bmake/unit-tests/cond-cmp-numeric.mk +++ b/contrib/bmake/unit-tests/cond-cmp-numeric.mk @@ -1,41 +1,57 @@ -# $NetBSD: cond-cmp-numeric.mk,v 1.4 2020/11/08 22:56:16 rillig Exp $ +# $NetBSD: cond-cmp-numeric.mk,v 1.5 2021/07/29 06:31:18 rillig Exp $ # # Tests for numeric comparisons in .if conditions. .MAKEFLAGS: -dc # The ${:U...} on the left-hand side is necessary for the parser. # Even if strtod(3) parses "INF" as +Infinity, make does not accept this # since it is not really a number; see TryParseNumber. .if !(${:UINF} > 1e100) . error .endif # Neither is NaN a number; see TryParseNumber. .if ${:UNaN} > NaN . error .endif # Since NaN is not parsed as a number, both operands are interpreted # as strings and are therefore equal. If they were parsed as numbers, # they would compare unequal, since NaN is unequal to any and everything, # including itself. .if !(${:UNaN} == NaN) . error .endif # The parsing code in CondParser_Comparison only performs a light check on # whether the operator is valid, leaving the rest of the work to the # evaluation functions EvalCompareNum and EvalCompareStr. Ensure that this # parse error is properly reported. # # XXX: The warning message does not mention the actual operator. .if 123 ! 123 . error .else . error .endif +# Leading spaces are allowed for numbers. +# See EvalCompare and TryParseNumber. +.if ${:U 123} < 124 +.else +. error +.endif + +# Trailing spaces are NOT allowed for numbers. +# See EvalCompare and TryParseNumber. +# expect+1: String comparison operator must be either == or != +.if ${:U123 } < 124 +. error +.else +. error +.endif + all: @:; diff --git a/contrib/bmake/unit-tests/cond-cmp-string.mk b/contrib/bmake/unit-tests/cond-cmp-string.mk index 9f3e731b2eb0..305a41099b98 100644 --- a/contrib/bmake/unit-tests/cond-cmp-string.mk +++ b/contrib/bmake/unit-tests/cond-cmp-string.mk @@ -1,138 +1,138 @@ -# $NetBSD: cond-cmp-string.mk,v 1.14 2021/01/19 19:54:57 rillig Exp $ +# $NetBSD: cond-cmp-string.mk,v 1.15 2021/12/11 09:53:53 rillig Exp $ # # Tests for string comparisons in .if conditions. # This is a simple comparison of string literals. # Nothing surprising here. .if "str" != "str" . error .endif # The right-hand side of the comparison may be written without quotes. .if "str" != str . error .endif # The left-hand side of the comparison must be enclosed in quotes. # This one is not enclosed in quotes and thus generates an error message. .if str != str . error .endif # The left-hand side of the comparison requires that any variable expression # is defined. # # The variable named "" is never defined, nevertheless it can be used as a # starting point for variable expressions. Applying the :U modifier to such # an undefined expression turns it into a defined expression. # -# See ApplyModifier_Defined and VEF_DEF. +# See ApplyModifier_Defined and DEF_DEFINED. .if ${:Ustr} != "str" . error .endif # Any character in a string literal may be escaped using a backslash. # This means that "\n" does not mean a newline but a simple "n". .if "string" != "\s\t\r\i\n\g" . error .endif # It is not possible to concatenate two string literals to form a single # string. In C, Python and the shell this is possible, but not in make. .if "string" != "str""ing" . error .else . error .endif # There is no = operator for strings. .if !("value" = "value") . error .else . error .endif # There is no === operator for strings either. .if !("value" === "value") . error .else . error .endif # A variable expression can be enclosed in double quotes. .if ${:Uword} != "${:Uword}" . error .endif # Between 2003-01-01 (maybe even earlier) and 2020-10-30, adding one of the # characters " \t!=><" directly after a variable expression resulted in a # "Malformed conditional", even though the string was well-formed. .if ${:Uword } != "${:Uword} " . error .endif # Some other characters worked though, and some didn't. # Those that are mentioned in is_separator didn't work. .if ${:Uword0} != "${:Uword}0" . error .endif .if ${:Uword&} != "${:Uword}&" . error .endif .if ${:Uword!} != "${:Uword}!" . error .endif .if ${:Uword<} != "${:Uword}<" . error .endif # Adding another variable expression to the string literal works though. .if ${:Uword} != "${:Uwo}${:Urd}" . error .endif # Adding a space at the beginning of the quoted variable expression works # though. .if ${:U word } != " ${:Uword} " . error .endif # If at least one side of the comparison is a string literal, the string # comparison is performed. .if 12345 != "12345" . error .endif # If at least one side of the comparison is a string literal, the string # comparison is performed. The ".0" in the left-hand side makes the two # sides of the equation unequal. .if 12345.0 == "12345" . error .endif # Strings cannot be compared relationally, only for equality. .if "string" < "string" . error .else . error .endif # Strings cannot be compared relationally, only for equality. .if "string" <= "string" . error .else . error .endif # Strings cannot be compared relationally, only for equality. .if "string" > "string" . error .else . error .endif # Strings cannot be compared relationally, only for equality. .if "string" >= "string" . error .else . error .endif diff --git a/contrib/bmake/unit-tests/cond-eof.exp b/contrib/bmake/unit-tests/cond-eof.exp index 3b1e6eb1f056..3016a9b27805 100644 --- a/contrib/bmake/unit-tests/cond-eof.exp +++ b/contrib/bmake/unit-tests/cond-eof.exp @@ -1,9 +1,6 @@ -side effect make: "cond-eof.mk" line 15: Malformed conditional (0 ${SIDE_EFFECT} ${SIDE_EFFECT2}) -side effect make: "cond-eof.mk" line 17: Malformed conditional (1 ${SIDE_EFFECT} ${SIDE_EFFECT2}) -side effect make: "cond-eof.mk" line 19: Malformed conditional ((0) ${SIDE_EFFECT} ${SIDE_EFFECT2}) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-eof.mk b/contrib/bmake/unit-tests/cond-eof.mk index 08f432bc4593..ddf4a4cd20c8 100644 --- a/contrib/bmake/unit-tests/cond-eof.mk +++ b/contrib/bmake/unit-tests/cond-eof.mk @@ -1,20 +1,20 @@ -# $NetBSD: cond-eof.mk,v 1.2 2020/12/14 20:28:09 rillig Exp $ +# $NetBSD: cond-eof.mk,v 1.3 2021/12/10 23:12:44 rillig Exp $ # # Tests for parsing conditions, especially the end of such conditions, which # are represented as the token TOK_EOF. SIDE_EFFECT= ${:!echo 'side effect' 1>&2!} SIDE_EFFECT2= ${:!echo 'side effect 2' 1>&2!} # In the following conditions, ${SIDE_EFFECT} is the position of the first -# parse error. It is always fully evaluated, even if it were not necessary -# to expand the variable expression. This is because these syntax errors are -# an edge case that does not occur during normal operation, therefore there -# is no need to optimize for this case, and it would slow down the common -# case as well. +# parse error. Before cond.c 1.286 from 2021-12-10, it was always fully +# evaluated, even if it was not necessary to expand the variable expression. +# These syntax errors are an edge case that does not occur during normal +# operation. Still, it is easy to avoid evaluating these expressions, just in +# case they have side effects. .if 0 ${SIDE_EFFECT} ${SIDE_EFFECT2} .endif .if 1 ${SIDE_EFFECT} ${SIDE_EFFECT2} .endif .if (0) ${SIDE_EFFECT} ${SIDE_EFFECT2} .endif diff --git a/contrib/bmake/unit-tests/cond-func-defined.mk b/contrib/bmake/unit-tests/cond-func-defined.mk index 2aa49ccbf147..43db548a572b 100644 --- a/contrib/bmake/unit-tests/cond-func-defined.mk +++ b/contrib/bmake/unit-tests/cond-func-defined.mk @@ -1,52 +1,52 @@ -# $NetBSD: cond-func-defined.mk,v 1.7 2020/11/15 14:07:53 rillig Exp $ +# $NetBSD: cond-func-defined.mk,v 1.8 2021/12/12 08:55:28 rillig Exp $ # # Tests for the defined() function in .if conditions. DEF= defined ${:UA B}= variable name with spaces .if !defined(DEF) . error .endif # Horizontal whitespace (space tab) after the opening parenthesis is ignored. .if !defined( DEF) . error .endif # Horizontal whitespace (space tab) before the closing parenthesis is ignored. .if !defined(DEF ) . error .endif # The argument of a function must not directly contain whitespace. .if !defined(A B) . error .endif # If necessary, the whitespace can be generated by a variable expression. .if !defined(${:UA B}) . error .endif -# Parse error: missing closing parenthesis; see ParseFuncArg. +# Parse error: missing closing parenthesis; see ParseWord. .if defined(DEF . error .else . error .endif # Variables from .for loops are not defined. # See directive-for.mk for more details. .for var in value . if defined(var) . error . else . info In .for loops, variable expressions for the loop variables are . info substituted at evaluation time. There is no actual variable . info involved, even if it feels like it. . endif .endfor all: @:; diff --git a/contrib/bmake/unit-tests/cond-func-empty.exp b/contrib/bmake/unit-tests/cond-func-empty.exp index 77a4edd47f49..d1dfda7c03ee 100644 --- a/contrib/bmake/unit-tests/cond-func-empty.exp +++ b/contrib/bmake/unit-tests/cond-func-empty.exp @@ -1,5 +1,5 @@ -make: "cond-func-empty.mk" line 152: Unclosed variable "WORD" -make: "cond-func-empty.mk" line 152: Malformed conditional (empty(WORD) +make: "cond-func-empty.mk" line 149: Unclosed variable "WORD" +make: "cond-func-empty.mk" line 149: Malformed conditional (empty(WORD) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-func-empty.mk b/contrib/bmake/unit-tests/cond-func-empty.mk index 11a990cbbce1..25c850d23d93 100644 --- a/contrib/bmake/unit-tests/cond-func-empty.mk +++ b/contrib/bmake/unit-tests/cond-func-empty.mk @@ -1,184 +1,193 @@ -# $NetBSD: cond-func-empty.mk,v 1.14 2021/04/11 13:35:56 rillig Exp $ +# $NetBSD: cond-func-empty.mk,v 1.16 2021/12/11 10:41:31 rillig Exp $ # # Tests for the empty() function in .if conditions, which tests a variable # expression for emptiness. # -# Note that the argument in the parentheses is indeed a variable name, -# optionally followed by variable modifiers. +# Note that the argument in the parentheses is a variable name, not a variable +# expression, optionally followed by variable modifiers. # .undef UNDEF EMPTY= # empty SPACE= ${:U } WORD= word # An undefined variable is empty. .if !empty(UNDEF) . error .endif # An undefined variable has the empty string as the value, and the :M # variable modifier does not change that. # .if !empty(UNDEF:M*) . error .endif # The :S modifier replaces the empty value with an actual word. The -# expression is now no longer empty, but it is still possible to see whether -# the expression was based on an undefined variable. The expression has the -# flag VEF_UNDEF. -# -# The expression does not have the flag VEF_DEF though, therefore it is still -# considered undefined. Yes, indeed, undefined but not empty. There are a -# few variable modifiers that turn an undefined expression into a defined -# expression, among them :U and :D, but not :S. +# expression is now no longer empty, but it is still based on an undefined +# variable (DEF_UNDEF). There are a few variable modifiers that turn an +# undefined expression into a defined expression, among them :U and :D, but +# not :S. # # XXX: This is hard to explain to someone who doesn't know these # implementation details. # .if !empty(UNDEF:S,^$,value,W) . error .endif -# The :U modifier modifies expressions based on undefined variables -# (DEF_UNDEF) by adding the DEF_DEFINED flag, which marks the expression -# as "being interesting enough to be further processed". +# The :U modifier changes the state of a previously undefined expression from +# DEF_UNDEF to DEF_DEFINED. This marks the expression as "being interesting +# enough to be further processed". # .if empty(UNDEF:S,^$,value,W:Ufallback) . error .endif # And now to the surprising part. Applying the following :S modifier to the -# undefined expression makes it non-empty, but the marker VEF_UNDEF is -# preserved nevertheless. The :U modifier that follows only looks at the -# VEF_UNDEF flag to decide whether the variable is defined or not. This kind -# of makes sense since the :U modifier tests the _variable_, not the +# undefined expression makes it non-empty, but the expression is still in +# state DEF_UNDEF. The :U modifier that follows only looks at the state +# DEF_UNDEF to decide whether the variable is defined or not. This kind of +# makes sense since the :U modifier tests the _variable_, not the # _expression_. # # But since the variable was undefined to begin with, the fallback value from # the :U modifier is used in this expression. # .if ${UNDEF:S,^$,value,W:Ufallback} != "fallback" . error .endif # The variable EMPTY is completely empty (0 characters). .if !empty(EMPTY) . error .endif # The variable SPACE has a single space, which counts as being empty. .if !empty(SPACE) . error .endif # The variable .newline has a single newline, which counts as being empty. .if !empty(.newline) . error .endif -# The empty variable named "" gets a fallback value of " ", which counts as -# empty. +# The following example constructs an expression with the variable name "" +# and the value " ". This expression counts as empty since the value contains +# only whitespace. # # Contrary to the other functions in conditionals, the trailing space is not # stripped off, as can be seen in the -dv debug log. If the space had been -# stripped, it wouldn't make a difference in this case. +# stripped, it wouldn't make a difference in this case, but in other cases. # .if !empty(:U ) . error .endif # Now the variable named " " gets a non-empty value, which demonstrates that # neither leading nor trailing spaces are trimmed in the argument of the # function. If the spaces were trimmed, the variable name would be "" and -# that variable is indeed undefined. Since ParseEmptyArg calls Var_Parse -# without VARE_UNDEFERR, the value of the undefined variable is +# that variable is indeed undefined. Since CondParser_FuncCallEmpty calls +# Var_Parse without VARE_UNDEFERR, the value of the undefined variable is # returned as an empty string. ${:U }= space .if empty( ) . error .endif # The value of the following expression is " word", which is not empty. .if empty(:U word) . error .endif # The :L modifier creates a variable expression that has the same value as # its name, which both are "VAR" in this case. The value is therefore not # empty. .if empty(VAR:L) . error .endif # The variable WORD has the value "word", which does not count as empty. .if empty(WORD) . error .endif # The expression ${} for a variable with the empty name always evaluates # to an empty string (see Var_Parse, varUndefined). .if !empty() . error .endif # Ensure that variable expressions that appear as part of the argument are # properly parsed. Typical use cases for this are .for loops, which are # expanded to exactly these ${:U} expressions. # # If everything goes well, the argument expands to "WORD", and that variable # is defined at the beginning of this file. The surrounding 'W' and 'D' -# ensure that the parser in ParseEmptyArg has the correct position, both -# before and after the call to Var_Parse. +# ensure that CondParser_FuncCallEmpty keeps track of the parsing position, +# both before and after the call to Var_Parse. .if empty(W${:UOR}D) . error .endif # There may be spaces at the outside of the parentheses. # Spaces inside the parentheses are interpreted as part of the variable name. .if ! empty ( WORD ) . error .endif ${:U WORD }= variable name with spaces # Now there is a variable named " WORD ", and it is not empty. .if empty ( WORD ) . error .endif # Parse error: missing closing parenthesis. .if empty(WORD . error .else . error .endif -# Between 2020-06-28 and var.c 1.226 from 2020-07-02, this paragraph generated -# a wrong error message "Variable VARNAME is recursive". +# Since cond.c 1.76 from 2020-06-28 and before var.c 1.226 from 2020-07-02, +# the following example generated a wrong error message "Variable VARNAME is +# recursive". +# +# Since at least 1993, the manual page claimed that irrelevant parts of +# conditions were not evaluated, but that was wrong for a long time. The +# expressions in irrelevant parts of the condition were actually evaluated, +# they just allowed undefined variables to be used in the conditions, and the +# result of evaluating them was not used further. These unnecessary +# evaluations were fixed in several commits, starting with var.c 1.226 from +# 2020-07-02. # -# The bug was that the !empty() condition was evaluated, even though this was -# not necessary since the defined() condition already evaluated to false. +# In this example, the variable "VARNAME2" is not defined, so evaluation of +# the condition should have stopped at this point, and the rest of the +# condition should have been processed in parse-only mode. The right-hand +# side containing the '!empty' was evaluated though, as it had always been. # # When evaluating the !empty condition, the variable name was parsed as # "VARNAME${:U2}", but without expanding any nested variable expression, in -# this case the ${:U2}. Therefore, the variable name came out as simply -# "VARNAME". Since this variable name should have been discarded quickly after -# parsing it, this unrealistic variable name should have done no harm. +# this case the ${:U2}. The expression '${:U2}' was replaced with an empty +# string, the resulting variable name was thus "VARNAME". This conceptually +# wrong variable name should have been discarded quickly after parsing it, to +# prevent it from doing any harm. # # The variable expression was expanded though, and this was wrong. The # expansion was done without VARE_WANTRES (called VARF_WANTRES back # then) though. This had the effect that the ${:U1} from the value of VARNAME # expanded to an empty string. This in turn created the seemingly recursive # definition VARNAME=${VARNAME}, and that definition was never meant to be # expanded. # # This was fixed by expanding nested variable expressions in the variable name # only if the flag VARE_WANTRES is given. VARNAME= ${VARNAME${:U1}} .if defined(VARNAME${:U2}) && !empty(VARNAME${:U2}) .endif all: @:; diff --git a/contrib/bmake/unit-tests/cond-func.exp b/contrib/bmake/unit-tests/cond-func.exp index 855b9e5210fd..8dc0f821a255 100644 --- a/contrib/bmake/unit-tests/cond-func.exp +++ b/contrib/bmake/unit-tests/cond-func.exp @@ -1,12 +1,12 @@ make: "cond-func.mk" line 36: Missing closing parenthesis for defined() make: "cond-func.mk" line 51: Missing closing parenthesis for defined() make: "cond-func.mk" line 54: Missing closing parenthesis for defined() make: "cond-func.mk" line 94: The empty variable is never defined. make: "cond-func.mk" line 102: A plain function name is parsed as !empty(...). make: "cond-func.mk" line 109: A plain function name is parsed as !empty(...). make: "cond-func.mk" line 119: Symbols may start with a function name. make: "cond-func.mk" line 124: Symbols may start with a function name. -make: "cond-func.mk" line 130: Malformed conditional (defined() +make: "cond-func.mk" line 130: Missing closing parenthesis for defined() make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-op-and.exp b/contrib/bmake/unit-tests/cond-op-and.exp index 173b6861a98b..cd6b03a8359e 100644 --- a/contrib/bmake/unit-tests/cond-op-and.exp +++ b/contrib/bmake/unit-tests/cond-op-and.exp @@ -1,4 +1,7 @@ -make: "cond-op-and.mk" line 43: Malformed conditional (0 &&& 0) +make: "cond-op-and.mk" line 36: Malformed conditional (0 || (${DEF} && ${UNDEF})) +make: "cond-op-and.mk" line 40: Malformed conditional (0 || (${UNDEF} && ${UNDEF})) +make: "cond-op-and.mk" line 42: Malformed conditional (0 || (!${UNDEF} && ${UNDEF})) +make: "cond-op-and.mk" line 71: Malformed conditional (0 &&& 0) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-op-and.mk b/contrib/bmake/unit-tests/cond-op-and.mk index 83c694f15723..83386ed77de4 100644 --- a/contrib/bmake/unit-tests/cond-op-and.mk +++ b/contrib/bmake/unit-tests/cond-op-and.mk @@ -1,48 +1,76 @@ -# $NetBSD: cond-op-and.mk,v 1.5 2020/10/24 08:46:08 rillig Exp $ +# $NetBSD: cond-op-and.mk,v 1.6 2021/12/10 19:14:35 rillig Exp $ # # Tests for the && operator in .if conditions. .if 0 && 0 . error .endif .if 1 && 0 . error .endif .if 0 && 1 . error .endif .if !(1 && 1) . error .endif + # The right-hand side is not evaluated since the left-hand side is already # false. .if 0 && ${UNDEF} .endif +# When an outer condition makes the inner '&&' condition irrelevant, neither +# of its operands must be evaluated. +# +.if 1 || (${UNDEF} && ${UNDEF}) +.endif + +# Test combinations of outer '||' with inner '&&', to ensure that the operands +# of the inner '&&' are only evaluated if necessary. +DEF= defined +.if 0 || (${DEF} && ${UNDEF}) +.endif +.if 0 || (!${DEF} && ${UNDEF}) +.endif +.if 0 || (${UNDEF} && ${UNDEF}) +.endif +.if 0 || (!${UNDEF} && ${UNDEF}) +.endif +.if 1 || (${DEF} && ${UNDEF}) +.endif +.if 1 || (!${DEF} && ${UNDEF}) +.endif +.if 1 || (${UNDEF} && ${UNDEF}) +.endif +.if 1 || (!${UNDEF} && ${UNDEF}) +.endif + + # The && operator may be abbreviated as &. This is not widely known though # and is also not documented in the manual page. .if 0 & 0 . error .endif .if 1 & 0 . error .endif .if 0 & 1 . error .endif .if !(1 & 1) . error .endif # There is no operator &&&. .if 0 &&& 0 . error .endif all: @:; diff --git a/contrib/bmake/unit-tests/cond-op-or.exp b/contrib/bmake/unit-tests/cond-op-or.exp index 7888a475e3e4..43b9a5438a31 100644 --- a/contrib/bmake/unit-tests/cond-op-or.exp +++ b/contrib/bmake/unit-tests/cond-op-or.exp @@ -1,4 +1,7 @@ -make: "cond-op-or.mk" line 43: Malformed conditional (0 ||| 0) +make: "cond-op-or.mk" line 46: Malformed conditional (1 && (!${DEF} || ${UNDEF})) +make: "cond-op-or.mk" line 48: Malformed conditional (1 && (${UNDEF} || ${UNDEF})) +make: "cond-op-or.mk" line 50: Malformed conditional (1 && (!${UNDEF} || ${UNDEF})) +make: "cond-op-or.mk" line 71: Malformed conditional (0 ||| 0) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-op-or.mk b/contrib/bmake/unit-tests/cond-op-or.mk index c6993e7c277e..0b7ac55e6c35 100644 --- a/contrib/bmake/unit-tests/cond-op-or.mk +++ b/contrib/bmake/unit-tests/cond-op-or.mk @@ -1,48 +1,76 @@ -# $NetBSD: cond-op-or.mk,v 1.6 2020/10/24 08:46:08 rillig Exp $ +# $NetBSD: cond-op-or.mk,v 1.8 2021/12/10 19:14:35 rillig Exp $ # # Tests for the || operator in .if conditions. .if 0 || 0 . error .endif .if !(1 || 0) . error .endif .if !(0 || 1) . error .endif .if !(1 || 1) . error .endif + # The right-hand side is not evaluated since the left-hand side is already # true. .if 1 || ${UNDEF} .endif +# When an outer condition makes the inner '||' condition irrelevant, neither +# of its operands must be evaluated. This had been wrong in cond.c 1.283 from +# 2021-12-09 and was reverted in cond.c 1.284 an hour later. +.if 0 && (!defined(UNDEF) || ${UNDEF}) +.endif + +# Test combinations of outer '&&' with inner '||', to ensure that the operands +# of the inner '||' is only evaluated if necessary. +DEF= defined +.if 0 && (${DEF} || ${UNDEF}) +.endif +.if 0 && (!${DEF} || ${UNDEF}) +.endif +.if 0 && (${UNDEF} || ${UNDEF}) +.endif +.if 0 && (!${UNDEF} || ${UNDEF}) +.endif +.if 1 && (${DEF} || ${UNDEF}) +.endif +.if 1 && (!${DEF} || ${UNDEF}) +.endif +.if 1 && (${UNDEF} || ${UNDEF}) +.endif +.if 1 && (!${UNDEF} || ${UNDEF}) +.endif + + # The || operator may be abbreviated as |. This is not widely known though # and is also not documented in the manual page. .if 0 | 0 . error .endif .if !(1 | 0) . error .endif .if !(0 | 1) . error .endif .if !(1 | 1) . error .endif # There is no operator |||. .if 0 ||| 0 . error .endif all: @:; diff --git a/contrib/bmake/unit-tests/cond-op.exp b/contrib/bmake/unit-tests/cond-op.exp index 28e8d48e2697..b8f6a4301819 100644 --- a/contrib/bmake/unit-tests/cond-op.exp +++ b/contrib/bmake/unit-tests/cond-op.exp @@ -1,20 +1,22 @@ make: "cond-op.mk" line 50: Malformed conditional ("!word" == !word) -make: "cond-op.mk" line 75: Malformed conditional (0 ${ERR::=evaluated}) -make: "cond-op.mk" line 79: After detecting a parse error, the rest is evaluated. -make: "cond-op.mk" line 83: Parsing continues until here. -make: "cond-op.mk" line 86: A B C => (A || B) && C A || B && C A || (B && C) -make: "cond-op.mk" line 93: 0 0 0 => 0 0 0 -make: "cond-op.mk" line 93: 0 0 1 => 0 0 0 -make: "cond-op.mk" line 93: 0 1 0 => 0 0 0 -make: "cond-op.mk" line 93: 0 1 1 => 1 1 1 -make: "cond-op.mk" line 93: 1 0 0 => 0 1 1 -make: "cond-op.mk" line 93: 1 0 1 => 1 1 1 -make: "cond-op.mk" line 93: 1 1 0 => 0 1 1 -make: "cond-op.mk" line 93: 1 1 1 => 1 1 1 -make: "cond-op.mk" line 104: Malformed conditional (1 &&) -make: "cond-op.mk" line 112: Malformed conditional (0 &&) -make: "cond-op.mk" line 120: Malformed conditional (1 ||) -make: "cond-op.mk" line 129: Malformed conditional (0 ||) +make: "cond-op.mk" line 76: Malformed conditional (0 ${ERR::=evaluated}) +make: "cond-op.mk" line 80: A misplaced expression after 0 is not evaluated. +make: "cond-op.mk" line 84: Malformed conditional (1 ${ERR::=evaluated}) +make: "cond-op.mk" line 88: A misplaced expression after 1 is not evaluated. +make: "cond-op.mk" line 92: Parsing continues until here. +make: "cond-op.mk" line 95: A B C => (A || B) && C A || B && C A || (B && C) +make: "cond-op.mk" line 102: 0 0 0 => 0 0 0 +make: "cond-op.mk" line 102: 0 0 1 => 0 0 0 +make: "cond-op.mk" line 102: 0 1 0 => 0 0 0 +make: "cond-op.mk" line 102: 0 1 1 => 1 1 1 +make: "cond-op.mk" line 102: 1 0 0 => 0 1 1 +make: "cond-op.mk" line 102: 1 0 1 => 1 1 1 +make: "cond-op.mk" line 102: 1 1 0 => 0 1 1 +make: "cond-op.mk" line 102: 1 1 1 => 1 1 1 +make: "cond-op.mk" line 113: Malformed conditional (1 &&) +make: "cond-op.mk" line 121: Malformed conditional (0 &&) +make: "cond-op.mk" line 129: Malformed conditional (1 ||) +make: "cond-op.mk" line 138: Malformed conditional (0 ||) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-op.mk b/contrib/bmake/unit-tests/cond-op.mk index 2ed451c90391..c3ab09f7709a 100644 --- a/contrib/bmake/unit-tests/cond-op.mk +++ b/contrib/bmake/unit-tests/cond-op.mk @@ -1,136 +1,145 @@ -# $NetBSD: cond-op.mk,v 1.13 2021/01/19 18:20:30 rillig Exp $ +# $NetBSD: cond-op.mk,v 1.15 2021/12/10 23:12:44 rillig Exp $ # # Tests for operators like &&, ||, ! in .if conditions. # # See also: # cond-op-and.mk # cond-op-not.mk # cond-op-or.mk # cond-op-parentheses.mk # In make, && binds more tightly than ||, like in C. # If make had the same precedence for both && and ||, like in the shell, # the result would be different. # If || were to bind more tightly than &&, the result would be different # as well. .if !(1 || 1 && 0) . error .endif # If make were to interpret the && and || operators like the shell, the # previous condition would be interpreted as: .if (1 || 1) && 0 . error .endif # The precedence of the ! operator is different from C though. It has a # lower precedence than the comparison operators. Negating a condition # does not need parentheses. # # This kind of condition looks so unfamiliar that it doesn't occur in # practice. .if !"word" == "word" . error .endif # This is how the above condition is actually interpreted. .if !("word" == "word") . error .endif # TODO: Demonstrate that the precedence of the ! and == operators actually # makes a difference. There is a simple example for sure, I just cannot # wrap my head around it right now. See the truth table generator below # for an example that doesn't require much thought. # This condition is malformed because the '!' on the right-hand side must not # appear unquoted. If any, it must be enclosed in quotes. # In any case, it is not interpreted as a negation of an unquoted string. # See CondParser_String. .if "!word" == !word . error .endif # Surprisingly, the ampersand and pipe are allowed in bare strings. # That's another opportunity for writing confusing code. # See CondParser_String, which only has '!' in the list of stop characters. .if "a&&b||c" != a&&b||c . error .endif -# As soon as the parser sees the '$', it knows that the condition will -# be malformed. Therefore there is no point in evaluating it. +# In the following malformed conditions, as soon as the parser sees the '$' +# after the '0' or the '1', it knows that the condition will be malformed. +# Therefore there is no point in evaluating the misplaced expression. # -# As of 2021-01-20, that part of the condition is evaluated nevertheless, -# since CondParser_Or just requests the next token, without restricting -# the token to the expected tokens. If the parser were to restrict the -# valid follow tokens for the token "0" to those that can actually produce -# a correct condition (which in this case would be comparison operators, -# TOK_AND, TOK_OR or TOK_RPAREN), the variable expression would not have -# to be evaluated. +# Before cond.c 1.286 from 2021-12-10, the extra expression was evaluated +# nevertheless, since CondParser_Or and CondParser_And asked for the expanded +# next token, even though in this position of the condition, only comparison +# operators, TOK_AND, TOK_OR or TOK_RPAREN are allowed. # -# This would add a good deal of complexity to the code though, for almost -# no benefit, especially since most expressions and conditions are side -# effect free. +# +# +# +# +# +.undef ERR .if 0 ${ERR::=evaluated} . error .endif -.if ${ERR:Uundefined} == evaluated -. info After detecting a parse error, the rest is evaluated. +.if ${ERR:Uundefined} == undefined +. info A misplaced expression after 0 is not evaluated. +.endif + +.undef ERR +.if 1 ${ERR::=evaluated} +. error +.endif +.if ${ERR:Uundefined} == undefined +. info A misplaced expression after 1 is not evaluated. .endif # Just in case that parsing should ever stop on the first error. .info Parsing continues until here. # Demonstration that '&&' has higher precedence than '||'. .info A B C => (A || B) && C A || B && C A || (B && C) .for a in 0 1 . for b in 0 1 . for c in 0 1 . for r1 in ${ ($a || $b) && $c :?1:0} . for r2 in ${ $a || $b && $c :?1:0} . for r3 in ${ $a || ($b && $c) :?1:0} . info $a $b $c => ${r1} ${r2} ${r3} . endfor . endfor . endfor . endfor . endfor .endfor # This condition is obviously malformed. It is properly detected and also # was properly detected before 2021-01-19, but only because the left hand # side of the '&&' evaluated to true. .if 1 && . error .else . error .endif # This obviously malformed condition was not detected as such before cond.c # 1.238 from 2021-01-19. .if 0 && . error .else . error .endif # This obviously malformed condition was not detected as such before cond.c # 1.238 from 2021-01-19. .if 1 || . error .else . error .endif # This condition is obviously malformed. It is properly detected and also # was properly detected before 2021-01-19, but only because the left hand # side of the '||' evaluated to false. .if 0 || . error .else . error .endif all: @:; diff --git a/contrib/bmake/unit-tests/cond-short.mk b/contrib/bmake/unit-tests/cond-short.mk index 113c3fd08fed..d41c38488fd6 100644 --- a/contrib/bmake/unit-tests/cond-short.mk +++ b/contrib/bmake/unit-tests/cond-short.mk @@ -1,214 +1,279 @@ -# $NetBSD: cond-short.mk,v 1.16 2021/03/14 11:49:37 rillig Exp $ +# $NetBSD: cond-short.mk,v 1.18 2021/12/12 09:49:09 rillig Exp $ # # Demonstrates that in conditions, the right-hand side of an && or || # is only evaluated if it can actually influence the result. # This is called 'short-circuit evaluation' and is the usual evaluation # mode in most programming languages. A notable exception is Ada, which # distinguishes between the operators 'And', 'And Then', 'Or', 'Or Else'. # # Before 2020-06-28, the right-hand side of an && or || operator was always # evaluated, which was wrong. In cond.c 1.69 and var.c 1.197 on 2015-10-11, # Var_Parse got a new parameter named 'wantit'. Since then it would have been # possible to skip evaluation of irrelevant variable expressions and only # parse them. They were still evaluated though, the only difference to # relevant variable expressions was that in the irrelevant variable -# expressions, undefined variables were allowed. +# expressions, undefined variables were allowed. This allowed for conditions +# like 'defined(VAR) && ${VAR:S,from,to,} != ""', which no longer produced an +# error message 'Malformed conditional', but it still evaluated the +# expression, even though the expression was irrelevant. +# +# Since the initial commit on 1993-03-21, the manual page has been saying that +# make 'will only evaluate a conditional as far as is necessary to determine', +# but that was wrong. The code in cond.c 1.1 from 1993-03-21 looks good since +# it calls Var_Parse(condExpr, VAR_CMD, doEval,&varSpecLen,&doFree), but the +# definition of Var_Parse does not call the third parameter 'doEval', as would +# be expected, but instead 'err', accompanied by the comment 'TRUE if +# undefined variables are an error'. This subtle difference between 'do not +# evaluate at all' and 'allow undefined variables' led to the unexpected +# evaluation. # # See also: # var-eval-short.mk, for short-circuited variable modifiers # The && operator: .if 0 && ${echo "unexpected and" 1>&2 :L:sh} .endif .if 1 && ${echo "expected and" 1>&2 :L:sh} .endif .if 0 && exists(nonexistent${echo "unexpected and exists" 1>&2 :L:sh}) .endif .if 1 && exists(nonexistent${echo "expected and exists" 1>&2 :L:sh}) .endif .if 0 && empty(${echo "unexpected and empty" 1>&2 :L:sh}) .endif .if 1 && empty(${echo "expected and empty" 1>&2 :L:sh}) .endif # "VAR U11" is not evaluated; it was evaluated before 2020-07-02. # The whole !empty condition is only parsed and then discarded. VAR= ${VAR${:U11${echo "unexpected VAR U11" 1>&2 :L:sh}}} VAR13= ${VAR${:U12${echo "unexpected VAR13" 1>&2 :L:sh}}} .if 0 && !empty(VAR${:U13${echo "unexpected U13 condition" 1>&2 :L:sh}}) .endif VAR= ${VAR${:U21${echo "unexpected VAR U21" 1>&2 :L:sh}}} VAR23= ${VAR${:U22${echo "expected VAR23" 1>&2 :L:sh}}} .if 1 && !empty(VAR${:U23${echo "expected U23 condition" 1>&2 :L:sh}}) .endif VAR= # empty again, for the following tests # The :M modifier is only parsed, not evaluated. # Before 2020-07-02, it was wrongly evaluated. .if 0 && !empty(VAR:M${:U${echo "unexpected M pattern" 1>&2 :L:sh}}) .endif .if 1 && !empty(VAR:M${:U${echo "expected M pattern" 1>&2 :L:sh}}) .endif .if 0 && !empty(VAR:S,from,${:U${echo "unexpected S modifier" 1>&2 :L:sh}},) .endif .if 0 && !empty(VAR:C,from,${:U${echo "unexpected C modifier" 1>&2 :L:sh}},) .endif .if 0 && !empty("" == "" :? ${:U${echo "unexpected ? modifier" 1>&2 :L:sh}} :) .endif .if 0 && !empty(VAR:old=${:U${echo "unexpected = modifier" 1>&2 :L:sh}}) .endif .if 0 && !empty(1 2 3:L:@var@${:U${echo "unexpected @ modifier" 1>&2 :L:sh}}@) .endif .if 0 && !empty(:U${:!echo "unexpected exclam modifier" 1>&2 !}) .endif # Irrelevant assignment modifiers are skipped as well. .if 0 && ${1 2 3:L:@i@${FIRST::?=$i}@} .endif .if 0 && ${1 2 3:L:@i@${LAST::=$i}@} .endif .if 0 && ${1 2 3:L:@i@${APPENDED::+=$i}@} .endif .if 0 && ${echo.1 echo.2 echo.3:L:@i@${RAN::!=${i:C,.*,&; & 1>\&2,:S,., ,g}}@} .endif .if defined(FIRST) || defined(LAST) || defined(APPENDED) || defined(RAN) . warning first=${FIRST} last=${LAST} appended=${APPENDED} ran=${RAN} .endif # The || operator: .if 1 || ${echo "unexpected or" 1>&2 :L:sh} .endif .if 0 || ${echo "expected or" 1>&2 :L:sh} .endif .if 1 || exists(nonexistent${echo "unexpected or exists" 1>&2 :L:sh}) .endif .if 0 || exists(nonexistent${echo "expected or exists" 1>&2 :L:sh}) .endif .if 1 || empty(${echo "unexpected or empty" 1>&2 :L:sh}) .endif .if 0 || empty(${echo "expected or empty" 1>&2 :L:sh}) .endif # Unreachable nested conditions are skipped completely as well. .if 0 . if ${echo "unexpected nested and" 1>&2 :L:sh} . endif .endif .if 1 .elif ${echo "unexpected nested or" 1>&2 :L:sh} .endif # make sure these do not cause complaint #.MAKEFLAGS: -dc # TODO: Rewrite this whole section and check all the conditions and variables. # Several of the assumptions are probably wrong here. # TODO: replace 'x=' with '.info' or '.error'. V42= 42 iV1= ${V42} iV2= ${V66} .if defined(V42) && ${V42} > 0 x= Ok .else x= Fail .endif x!= echo 'defined(V42) && $${V42} > 0: $x' >&2; echo # With cond.c 1.76 from 2020-07-03, the following condition triggered a # warning: "String comparison operator should be either == or !=". # This was because the variable expression ${iV2} was defined, but the # contained variable V66 was undefined. The left-hand side of the comparison # therefore evaluated to the string "${V66}", which is obviously not a number. # # This was fixed in cond.c 1.79 from 2020-07-09 by not evaluating irrelevant # comparisons. Instead, they are only parsed and then discarded. # # At that time, there was not enough debug logging to see the details in the # -dA log. To actually see it, add debug logging at the beginning and end of # Var_Parse. .if defined(V66) && ( ${iV2} < ${V42} ) x= Fail .else x= Ok .endif # XXX: This condition doesn't match the one above. The quotes are missing # above. This is a crucial detail since without quotes, the variable # expression ${iV2} evaluates to "${V66}", and with quotes, it evaluates to "" # since undefined variables are allowed and expand to an empty string. x!= echo 'defined(V66) && ( "$${iV2}" < $${V42} ): $x' >&2; echo .if 1 || ${iV1} < ${V42} x= Ok .else x= Fail .endif x!= echo '1 || $${iV1} < $${V42}: $x' >&2; echo # With cond.c 1.76 from 2020-07-03, the following condition triggered a # warning: "String comparison operator should be either == or !=". # This was because the variable expression ${iV2} was defined, but the # contained variable V66 was undefined. The left-hand side of the comparison # therefore evaluated to the string "${V66}", which is obviously not a number. # # This was fixed in cond.c 1.79 from 2020-07-09 by not evaluating irrelevant # comparisons. Instead, they are only parsed and then discarded. # # At that time, there was not enough debug logging to see the details in the # -dA log. To actually see it, add debug logging at the beginning and end of # Var_Parse. .if 1 || ${iV2:U2} < ${V42} x= Ok .else x= Fail .endif x!= echo '1 || $${iV2:U2} < $${V42}: $x' >&2; echo # the same expressions are fine when the lhs is expanded # ${iV1} expands to 42 .if 0 || ${iV1} <= ${V42} x= Ok .else x= Fail .endif x!= echo '0 || $${iV1} <= $${V42}: $x' >&2; echo # ${iV2:U2} expands to 2 .if 0 || ${iV2:U2} < ${V42} x= Ok .else x= Fail .endif x!= echo '0 || $${iV2:U2} < $${V42}: $x' >&2; echo # The right-hand side of the '&&' is irrelevant since the left-hand side # already evaluates to false. Before cond.c 1.79 from 2020-07-09, it was # expanded nevertheless, although with a small modification: undefined # variables may be used in these expressions without generating an error. .if defined(UNDEF) && ${UNDEF} != "undefined" . error .endif + +# Ensure that irrelevant conditions do not influence the result of the whole +# condition. As of cond.c 1.302 from 2021-12-11, an irrelevant function call +# evaluates to true (see CondParser_FuncCall and CondParser_FuncCallEmpty), an +# irrelevant comparison evaluates to false (see CondParser_Comparison). +# +# An irrelevant true bubbles up to the outermost CondParser_And, where it is +# ignored. An irrelevant false bubbles up to the outermost CondParser_Or, +# where it is ignored. +# +# If the condition parser should ever be restructured, the bubbling up of the +# irrelevant evaluation results might show up accidentally. Prevent this. +DEF= defined +.undef UNDEF + +.if 0 && defined(DEF) +. error +.endif + +.if 1 && defined(DEF) +.else +. error +.endif + +.if 0 && defined(UNDEF) +. error +.endif + +.if 1 && defined(UNDEF) +. error +.endif + +.if 0 || defined(DEF) +.else +. error +.endif + +.if 1 || defined(DEF) +.else +. error +.endif + +.if 0 || defined(UNDEF) +. error +.endif + +.if 1 || defined(UNDEF) +.else +. error +.endif + + all: diff --git a/contrib/bmake/unit-tests/cond-token-plain.exp b/contrib/bmake/unit-tests/cond-token-plain.exp index 24cfa6bcbc82..8afde2d41788 100644 --- a/contrib/bmake/unit-tests/cond-token-plain.exp +++ b/contrib/bmake/unit-tests/cond-token-plain.exp @@ -1,54 +1,61 @@ CondParser_Eval: ${:Uvalue} != value lhs = "value", rhs = "value", op = != CondParser_Eval: ${:U} != " lhs = "", rhs = "", op = != CondParser_Eval: ${:U#hash} != "#hash" lhs = "#hash", rhs = "#hash", op = != CondParser_Eval: ${:U\\} != "\\ lhs = "\", rhs = "\", op = != CondParser_Eval: ${:U#hash} != #hash lhs = "#hash", rhs = "#hash", op = != CondParser_Eval: 0 # This is treated as a comment, but why? CondParser_Eval: ${0 # comment :?yes:no} != no CondParser_Eval: 0 # comment lhs = "no", rhs = "no", op = != CondParser_Eval: ${1 # comment :?yes:no} != yes CondParser_Eval: 1 # comment lhs = "yes", rhs = "yes", op = != CondParser_Eval: ${UNDEF:Uundefined}!=undefined lhs = "undefined", rhs = "undefined", op = != CondParser_Eval: ${UNDEF:U12345}>12345 lhs = 12345.000000, rhs = 12345.000000, op = > CondParser_Eval: ${UNDEF:U12345}<12345 lhs = 12345.000000, rhs = 12345.000000, op = < CondParser_Eval: (${UNDEF:U0})||0 CondParser_Eval: ${:Uvar}&&name != "var&&name" lhs = "var&&name", rhs = "var&&name", op = != CondParser_Eval: ${:Uvar}||name != "var||name" lhs = "var||name", rhs = "var||name", op = != CondParser_Eval: bare -make: "cond-token-plain.mk" line 102: A bare word is treated like defined(...), and the variable 'bare' is not defined. +make: "cond-token-plain.mk" line 106: A bare word is treated like defined(...), and the variable 'bare' is not defined. CondParser_Eval: VAR -make: "cond-token-plain.mk" line 107: A bare word is treated like defined(...). +make: "cond-token-plain.mk" line 111: A bare word is treated like defined(...). CondParser_Eval: V${:UA}R -make: "cond-token-plain.mk" line 114: ok +make: "cond-token-plain.mk" line 118: ok CondParser_Eval: V${UNDEF}AR -make: "cond-token-plain.mk" line 122: Undefined variables in bare words expand to an empty string. +make: "cond-token-plain.mk" line 126: Undefined variables in bare words expand to an empty string. CondParser_Eval: 0${:Ux00} -make: "cond-token-plain.mk" line 130: Numbers can be composed from literals and variable expressions. -CondParser_Eval: 0${:Ux01} make: "cond-token-plain.mk" line 134: Numbers can be composed from literals and variable expressions. +CondParser_Eval: 0${:Ux01} +make: "cond-token-plain.mk" line 138: Numbers can be composed from literals and variable expressions. CondParser_Eval: "" == -make: "cond-token-plain.mk" line 140: Missing right-hand-side of operator '==' +make: "cond-token-plain.mk" line 144: Missing right-hand side of operator '==' CondParser_Eval: == "" -make: "cond-token-plain.mk" line 148: Malformed conditional (== "") +make: "cond-token-plain.mk" line 152: Malformed conditional (== "") CondParser_Eval: \\ -make: "cond-token-plain.mk" line 163: The variable '\\' is not defined. +make: "cond-token-plain.mk" line 167: The variable '\\' is not defined. CondParser_Eval: \\ -make: "cond-token-plain.mk" line 168: Now the variable '\\' is defined. +make: "cond-token-plain.mk" line 172: Now the variable '\\' is defined. CondParser_Eval: "unquoted\"quoted" != unquoted"quoted lhs = "unquoted"quoted", rhs = "unquoted"quoted", op = != CondParser_Eval: $$$$$$$$ != "" +CondParser_Eval: left == right +make: "cond-token-plain.mk" line 195: Malformed conditional (left == right) +CondParser_Eval: ${0:?:} || left == right +CondParser_Eval: 0 +make: "cond-token-plain.mk" line 201: Malformed conditional (${0:?:} || left == right) +CondParser_Eval: left == right || ${0:?:} +make: "cond-token-plain.mk" line 206: Malformed conditional (left == right || ${0:?:}) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/cond-token-plain.mk b/contrib/bmake/unit-tests/cond-token-plain.mk index 89f2247e077c..3e59f48bc3c7 100644 --- a/contrib/bmake/unit-tests/cond-token-plain.mk +++ b/contrib/bmake/unit-tests/cond-token-plain.mk @@ -1,192 +1,213 @@ -# $NetBSD: cond-token-plain.mk,v 1.10 2021/01/21 14:08:09 rillig Exp $ +# $NetBSD: cond-token-plain.mk,v 1.14 2021/12/12 09:36:00 rillig Exp $ # # Tests for plain tokens (that is, string literals without quotes) -# in .if conditions. +# in .if conditions. These are also called bare words. .MAKEFLAGS: -dc +# The word 'value' after the '!=' is a bare word. .if ${:Uvalue} != value . error .endif -# Malformed condition since comment parsing is done in an early phase -# and removes the '#' and everything behind it long before the condition -# parser gets to see it. +# Using a '#' in a string literal in a condition leads to a malformed +# condition since comment parsing is done in an early phase and removes the +# '#' and everything after it long before the condition parser gets to see it. # # XXX: The error message is missing for this malformed condition. # The right-hand side of the comparison is just a '"', before unescaping. .if ${:U} != "#hash" . error .endif # To get a '#' into a condition, it has to be escaped using a backslash. # This prevents the comment parser from removing it, and in turn, it becomes # visible to CondParser_String. .if ${:U\#hash} != "\#hash" . error .endif # Since 2002-12-30, and still as of 2020-09-11, CondParser_Token handles # the '#' specially, even though at this point, there should be no need for # comment handling anymore. The comments are supposed to be stripped off # in a very early parsing phase. # # See https://gnats.netbsd.org/19596 for example makefiles demonstrating the -# original problems. This workaround is probably not needed anymore. +# original problems. At that time, the parser didn't recognize the comment in +# the line '.else # comment3'. This workaround is not needed anymore since +# comments are stripped in an earlier phase. See "case '#'" in +# CondParser_Token. # # XXX: Missing error message for the malformed condition. The right-hand # side before unescaping is double-quotes, backslash, backslash. .if ${:U\\} != "\\#hash" . error .endif # The right-hand side of a comparison is not parsed as a token, therefore # the code from CondParser_Token does not apply to it. # TODO: Explain the consequences. # TODO: Does this mean that more syntactic variants are allowed here? .if ${:U\#hash} != \#hash . error .endif # XXX: What is the purpose of treating an escaped '#' in the following # condition as a comment? And why only at the beginning of a token, # just as in the shell? .if 0 \# This is treated as a comment, but why? . error .endif # Ah, ok, this can be used to add an end-of-condition comment. But does # anybody really use this? This is neither documented nor obvious since # the '#' is escaped. It's much clearer to write a comment in the line # above the condition. .if ${0 \# comment :?yes:no} != no . error .endif .if ${1 \# comment :?yes:no} != yes . error .endif # Usually there is whitespace around the comparison operator, but this is # not required. .if ${UNDEF:Uundefined}!=undefined . error .endif .if ${UNDEF:U12345}>12345 . error .endif .if ${UNDEF:U12345}<12345 . error .endif .if (${UNDEF:U0})||0 . error .endif # Only the comparison operator terminates the comparison operand, and it's # a coincidence that the '!' is both used in the '!=' comparison operator # as well as for negating a comparison result. # # The boolean operators '&' and '|' don't terminate a comparison operand. .if ${:Uvar}&&name != "var&&name" . error .endif .if ${:Uvar}||name != "var||name" . error .endif # A bare word may appear alone in a condition, without any comparison # operator. It is implicitly converted into defined(bare). .if bare . error .else . info A bare word is treated like defined(...), and the variable $\ 'bare' is not defined. .endif VAR= defined .if VAR . info A bare word is treated like defined(...). .else . error .endif # Bare words may be intermixed with variable expressions. .if V${:UA}R . info ok .else . error .endif # In bare words, even undefined variables are allowed. Without the bare # words, undefined variables are not allowed. That feels inconsistent. .if V${UNDEF}AR . info Undefined variables in bare words expand to an empty string. .else . error .endif .if 0${:Ux00} . error .else . info Numbers can be composed from literals and variable expressions. .endif .if 0${:Ux01} . info Numbers can be composed from literals and variable expressions. .else . error .endif # If the right-hand side is missing, it's a parse error. .if "" == . error .else . error .endif # If the left-hand side is missing, it's a parse error as well, but without # a specific error message. .if == "" . error .else . error .endif # The '\\' is not a line continuation. Neither is it an unquoted string -# literal. Instead, it is parsed as a function argument (ParseFuncArg), +# literal. Instead, it is parsed as a bare word (ParseWord), # and in that context, the backslash is just an ordinary character. The # function argument thus stays '\\' (2 backslashes). This string is passed # to FuncDefined, and since there is no variable named '\\', the condition # evaluates to false. .if \\ . error .else . info The variable '\\' is not defined. .endif ${:U\\\\}= backslash .if \\ . info Now the variable '\\' is defined. .else . error .endif # Anything that doesn't start with a double quote is considered a "bare word". # Strangely, a bare word may contain double quotes inside. Nobody should ever # depend on this since it may well be unintended. See CondParser_String. .if "unquoted\"quoted" != unquoted"quoted . error .endif # FIXME: In CondParser_String, Var_Parse returns var_Error without a # corresponding error message. .if $$$$$$$$ != "" . error .else . error .endif +# In a condition in an .if directive, the left-hand side must not be an +# unquoted string literal. +# expect+1: Malformed conditional (left == right) +.if left == right +.endif +# Before cond.c 1.276 from 2021-09-21, a variable expression containing the +# modifier ':?:' allowed unquoted string literals for the rest of the +# condition. This was an unintended implementation mistake. +# expect+1: Malformed conditional (${0:?:} || left == right) +.if ${0:?:} || left == right +.endif +# This affected only the comparisons after the expression, so the following +# was still a syntax error. +# expect+1: Malformed conditional (left == right || ${0:?:}) +.if left == right || ${0:?:} +.endif + # See cond-token-string.mk for similar tests where the condition is enclosed # in "quotes". all: @:; diff --git a/contrib/bmake/unit-tests/deptgt-default.exp b/contrib/bmake/unit-tests/deptgt-default.exp index 39a9383953dd..09fca899f063 100644 --- a/contrib/bmake/unit-tests/deptgt-default.exp +++ b/contrib/bmake/unit-tests/deptgt-default.exp @@ -1 +1,2 @@ +Default command is making 'not-a-target' from 'not-a-target'. exit status 0 diff --git a/contrib/bmake/unit-tests/deptgt-default.mk b/contrib/bmake/unit-tests/deptgt-default.mk index 814eaf72aed3..bf5f16536561 100644 --- a/contrib/bmake/unit-tests/deptgt-default.mk +++ b/contrib/bmake/unit-tests/deptgt-default.mk @@ -1,8 +1,17 @@ -# $NetBSD: deptgt-default.mk,v 1.2 2020/08/16 14:25:16 rillig Exp $ +# $NetBSD: deptgt-default.mk,v 1.3 2021/12/01 23:56:29 rillig Exp $ # -# Tests for the special target .DEFAULT in dependency declarations. +# Tests for the special target .DEFAULT in dependency declarations, which +# attaches its associated commands to all targets that don't specify any way +# to create them. -# TODO: Implementation +all: test-default not-a-target + +test-default: .PHONY + +has-commands: .PHONY + @echo 'Making ${.TARGET} from ${.IMPSRC}.' + +.DEFAULT: dependency-is-ignored + @echo "Default command is making '${.TARGET}' from '${.IMPSRC}'." all: - @:; diff --git a/contrib/bmake/unit-tests/deptgt-makeflags.mk b/contrib/bmake/unit-tests/deptgt-makeflags.mk index 0a0f410e14c4..26f3f5794354 100644 --- a/contrib/bmake/unit-tests/deptgt-makeflags.mk +++ b/contrib/bmake/unit-tests/deptgt-makeflags.mk @@ -1,93 +1,118 @@ -# $NetBSD: deptgt-makeflags.mk,v 1.6 2020/11/15 20:20:58 rillig Exp $ +# $NetBSD: deptgt-makeflags.mk,v 1.7 2021/11/29 00:17:10 rillig Exp $ # # Tests for the special target .MAKEFLAGS in dependency declarations, # which adds command line options later, at parse time. # # In these unit tests, it is often used to temporarily toggle the debug log # during parsing. # The -D option sets a variable in the "Global" scope and thus can be # undefined later. .MAKEFLAGS: -D VAR .if ${VAR} != 1 . error .endif # Variables that are set via the -D command line option are normal global # variables and can thus be undefined later. .undef VAR .if defined(VAR) . error .endif # The -D command line option can define a variable again, after it has been # undefined. .MAKEFLAGS: -D VAR .if ${VAR} != 1 . error .endif # The "dependency" for .MAKEFLAGS is split into words, interpreting the usual # quotes and escape sequences from the backslash. .MAKEFLAGS: VAR="value"' with'\ spaces .if ${VAR} != "value with spaces" . error .endif # Variables set on the command line as VAR=value are placed in the # "Command" scope and thus cannot be undefined. .undef VAR .if ${VAR} != "value with spaces" . error .endif # When parsing this line, each '$$' becomes '$', resulting in '$$$$'. # This is assigned to the variable DOLLAR. # In the condition, that variable is expanded, and at that point, each '$$' # becomes '$' again, the final expression is thus '$$'. .MAKEFLAGS: -dcv .MAKEFLAGS: DOLLAR=$$$$$$$$ .if ${DOLLAR} != "\$\$" .endif .MAKEFLAGS: -d0 # An empty command line is skipped. .MAKEFLAGS: # none # Escape sequences like \n are interpreted. # The following line looks as if it assigned a newline to nl, but it doesn't. # Instead, the \n ends up as a line that is then interpreted as a variable # assignment. At that point, the line is simply "nl=\n", and the \n is # skipped since it is whitespace (see Parse_IsVar). .MAKEFLAGS: nl="\n" .if ${nl} != "" . error .endif # Next try at defining another newline variable. Since whitespace around the -# variable value is trimmed, two empty variable expressions surround the +# variable value is trimmed, two empty variable expressions ${:U} surround the # literal newline now. This prevents the newline from being skipped during # parsing. The ':=' assignment operator expands the empty variable # expressions, leaving only the newline as the variable value. # # This is one of the very few ways (maybe even the only one) to inject literal # newlines into a line that is being parsed. This may confuse the parser. # For example, in cond.c the parser only expects horizontal whitespace (' ' # and '\t'), but no newlines. #.MAKEFLAGS: -dcpv .MAKEFLAGS: nl:="$${:U}\n$${:U}" .if ${nl} != ${.newline} . error .endif #.MAKEFLAGS: -d0 +# Now do the same for the other escape sequences; see Substring_Words. +.MAKEFLAGS: CHAR_BS:="$${:U}\b$${:U}" +.MAKEFLAGS: CHAR_FF:="$${:U}\f$${:U}" +.MAKEFLAGS: CHAR_NL:="$${:U}\n$${:U}" +.MAKEFLAGS: CHAR_CR:="$${:U}\r$${:U}" +.MAKEFLAGS: CHAR_TAB:="$${:U}\t$${:U}" + +# Note: backspace is not whitespace, it is a control character. +.if ${CHAR_BS:C,^[[:cntrl:]]$,found,W} != "found" +. error +.endif +.if ${CHAR_FF:C,^[[:space:]]$,found,W} != "found" +. error +.endif +.if ${CHAR_NL:C,^[[:space:]]$,found,W} != "found" +. error +.endif +.if ${CHAR_CR:C,^[[:space:]]$,found,W} != "found" +. error +.endif +.if ${CHAR_TAB:C,^[[:space:]]$,found,W} != "found" +. error +.endif + + # Unbalanced quotes produce an error message. If they occur anywhere in the # command line, the whole command line is skipped. .MAKEFLAGS: VAR=previous .MAKEFLAGS: VAR=initial UNBALANCED=' .if ${VAR} != "previous" . error .endif all: @:; diff --git a/contrib/bmake/unit-tests/directive-else.exp b/contrib/bmake/unit-tests/directive-else.exp index 138e893ffa88..17d5571ba74b 100644 --- a/contrib/bmake/unit-tests/directive-else.exp +++ b/contrib/bmake/unit-tests/directive-else.exp @@ -1,11 +1,11 @@ -make: "directive-else.mk" line 14: The .else directive does not take arguments. +make: "directive-else.mk" line 14: The .else directive does not take arguments make: "directive-else.mk" line 15: ok make: "directive-else.mk" line 19: ok -make: "directive-else.mk" line 21: The .else directive does not take arguments. +make: "directive-else.mk" line 21: The .else directive does not take arguments make: "directive-else.mk" line 26: if-less else make: "directive-else.mk" line 32: ok make: "directive-else.mk" line 33: warning: extra else -make: "directive-else.mk" line 45: The .else directive does not take arguments. +make: "directive-else.mk" line 45: The .else directive does not take arguments make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/directive-endif.exp b/contrib/bmake/unit-tests/directive-endif.exp index 286d85244eae..0de1ecf0bf25 100644 --- a/contrib/bmake/unit-tests/directive-endif.exp +++ b/contrib/bmake/unit-tests/directive-endif.exp @@ -1,8 +1,8 @@ -make: "directive-endif.mk" line 18: The .endif directive does not take arguments. -make: "directive-endif.mk" line 23: The .endif directive does not take arguments. -make: "directive-endif.mk" line 33: The .endif directive does not take arguments. -make: "directive-endif.mk" line 39: The .endif directive does not take arguments. +make: "directive-endif.mk" line 18: The .endif directive does not take arguments +make: "directive-endif.mk" line 23: The .endif directive does not take arguments +make: "directive-endif.mk" line 33: The .endif directive does not take arguments +make: "directive-endif.mk" line 39: The .endif directive does not take arguments make: "directive-endif.mk" line 45: Unknown directive "endifx" make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/directive-export-impl.exp b/contrib/bmake/unit-tests/directive-export-impl.exp index 740daa605129..152fc0de4063 100644 --- a/contrib/bmake/unit-tests/directive-export-impl.exp +++ b/contrib/bmake/unit-tests/directive-export-impl.exp @@ -1,56 +1,56 @@ ParseReadLine (21): 'UT_VAR= <${REF}>' Global: UT_VAR = <${REF}> ParseReadLine (28): '.export UT_VAR' Global: .MAKE.EXPORTED = UT_VAR ParseReadLine (32): ': ${UT_VAR:N*}' Var_Parse: ${UT_VAR:N*} (eval-defined) Var_Parse: ${REF}> (eval-defined) Evaluating modifier ${UT_VAR:N...} on value "<>" Pattern for ':N' is "*" -ModifyWords: split "<>" into 1 words +ModifyWords: split "<>" into 1 word Result of ${UT_VAR:N*} is "" ParseDependency(: ) CondParser_Eval: ${:!echo "\$UT_VAR"!} != "<>" Var_Parse: ${:!echo "\$UT_VAR"!} != "<>" (eval-defined) Evaluating modifier ${:!...} on value "" (eval-defined, undefined) Modifier part: "echo "$UT_VAR"" Var_Parse: ${.MAKE.EXPORTED:O:u} (eval) Evaluating modifier ${.MAKE.EXPORTED:O} on value "UT_VAR" Result of ${.MAKE.EXPORTED:O} is "UT_VAR" Evaluating modifier ${.MAKE.EXPORTED:u} on value "UT_VAR" Result of ${.MAKE.EXPORTED:u} is "UT_VAR" Var_Parse: ${UT_VAR} (eval) Var_Parse: ${REF}> (eval) Result of ${:!echo "\$UT_VAR"!} is "<>" (eval-defined, defined) lhs = "<>", rhs = "<>", op = != ParseReadLine (50): ': ${UT_VAR:N*}' Var_Parse: ${UT_VAR:N*} (eval-defined) Var_Parse: ${REF}> (eval-defined) Evaluating modifier ${UT_VAR:N...} on value "<>" Pattern for ':N' is "*" -ModifyWords: split "<>" into 1 words +ModifyWords: split "<>" into 1 word Result of ${UT_VAR:N*} is "" ParseDependency(: ) ParseReadLine (54): 'REF= defined' Global: REF = defined CondParser_Eval: ${:!echo "\$UT_VAR"!} != "" Var_Parse: ${:!echo "\$UT_VAR"!} != "" (eval-defined) Evaluating modifier ${:!...} on value "" (eval-defined, undefined) Modifier part: "echo "$UT_VAR"" Var_Parse: ${.MAKE.EXPORTED:O:u} (eval) Evaluating modifier ${.MAKE.EXPORTED:O} on value "UT_VAR" Result of ${.MAKE.EXPORTED:O} is "UT_VAR" Evaluating modifier ${.MAKE.EXPORTED:u} on value "UT_VAR" Result of ${.MAKE.EXPORTED:u} is "UT_VAR" Var_Parse: ${UT_VAR} (eval) Var_Parse: ${REF}> (eval) Result of ${:!echo "\$UT_VAR"!} is "" (eval-defined, defined) lhs = "", rhs = "", op = != ParseReadLine (62): 'all:' ParseDependency(all:) Global: .ALLTARGETS = all ParseReadLine (63): '.MAKEFLAGS: -d0' ParseDependency(.MAKEFLAGS: -d0) Global: .MAKEFLAGS = -r -k -d cpv -d Global: .MAKEFLAGS = -r -k -d cpv -d 0 exit status 0 diff --git a/contrib/bmake/unit-tests/directive-for-escape.exp b/contrib/bmake/unit-tests/directive-for-escape.exp index 59d4c2324f15..492f82e16d1f 100644 --- a/contrib/bmake/unit-tests/directive-for-escape.exp +++ b/contrib/bmake/unit-tests/directive-for-escape.exp @@ -1,75 +1,92 @@ For: end for 1 For: loop body: . info ${:U!"#$%&'()*+,-./0-9\:;<=>?@A-Z[\\]_^a-z{|\}~} make: Unclosed variable expression, expecting '}' for modifier "U!"" of variable "" with value "!"" make: "directive-for-escape.mk" line 19: !" For: end for 1 For: loop body: . info ${:U!"\\\\#$%&'()*+,-./0-9\:;<=>?@A-Z[\\]_^a-z{|\}~} make: Unclosed variable expression, expecting '}' for modifier "U!"\\\\" of variable "" with value "!"\\" make: "directive-for-escape.mk" line 29: !"\\ For: end for 1 For: loop body: . info ${:U\$} -make: "directive-for-escape.mk" line 41: $ +make: "directive-for-escape.mk" line 43: $ For: loop body: . info ${:U${V}} -make: "directive-for-escape.mk" line 41: value +make: "directive-for-escape.mk" line 43: value For: loop body: . info ${:U${V:=-with-modifier}} -make: "directive-for-escape.mk" line 41: value-with-modifier +make: "directive-for-escape.mk" line 43: value-with-modifier For: loop body: . info ${:U$(V)} -make: "directive-for-escape.mk" line 41: value +make: "directive-for-escape.mk" line 43: value For: loop body: . info ${:U$(V:=-with-modifier)} -make: "directive-for-escape.mk" line 41: value-with-modifier +make: "directive-for-escape.mk" line 43: value-with-modifier For: end for 1 For: loop body: . info ${:U\${UNDEF\:U\\$\\$} -make: "directive-for-escape.mk" line 55: ${UNDEF:U\$ +make: "directive-for-escape.mk" line 57: ${UNDEF:U\$ For: loop body: . info ${:U{{\}\}} -make: "directive-for-escape.mk" line 55: {{}} +make: "directive-for-escape.mk" line 57: {{}} For: loop body: . info ${:Uend\}} -make: "directive-for-escape.mk" line 55: end} +make: "directive-for-escape.mk" line 57: end} For: end for 1 For: loop body: . info ${:Ubegin<${UNDEF:Ufallback:N{{{}}}}>end} -make: "directive-for-escape.mk" line 67: beginend +make: "directive-for-escape.mk" line 69: beginend For: end for 1 For: loop body: . info ${:U\$} -make: "directive-for-escape.mk" line 75: $ +make: "directive-for-escape.mk" line 77: $ For: end for 1 For: loop body: . info ${NUMBERS} ${:Ureplaced} -make: "directive-for-escape.mk" line 83: one two three replaced +make: "directive-for-escape.mk" line 85: one two three replaced For: end for 1 For: loop body: . info ${:Ureplaced} -make: "directive-for-escape.mk" line 93: replaced +make: "directive-for-escape.mk" line 95: replaced For: end for 1 For: loop body: . info . $$i: ${:Uinner} . info . $${i}: ${:Uinner} . info . $${i:M*}: ${:Uinner:M*} . info . $$(i): $(:Uinner) . info . $$(i:M*): $(:Uinner:M*) . info . $${i$${:U}}: ${i${:U}} . info . $${i\}}: ${:Uinner\}} # XXX: unclear why ForLoop_SubstVarLong needs this . info . $${i2}: ${i2} . info . $${i,}: ${i,} . info . adjacent: ${:Uinner}${:Uinner}${:Uinner:M*}${:Uinner} -make: "directive-for-escape.mk" line 101: . $i: inner -make: "directive-for-escape.mk" line 102: . ${i}: inner -make: "directive-for-escape.mk" line 103: . ${i:M*}: inner -make: "directive-for-escape.mk" line 104: . $(i): inner -make: "directive-for-escape.mk" line 105: . $(i:M*): inner -make: "directive-for-escape.mk" line 106: . ${i${:U}}: outer -make: "directive-for-escape.mk" line 107: . ${i\}}: inner} -make: "directive-for-escape.mk" line 108: . ${i2}: two -make: "directive-for-escape.mk" line 109: . ${i,}: comma -make: "directive-for-escape.mk" line 110: . adjacent: innerinnerinnerinner -exit status 0 +make: "directive-for-escape.mk" line 103: . $i: inner +make: "directive-for-escape.mk" line 104: . ${i}: inner +make: "directive-for-escape.mk" line 105: . ${i:M*}: inner +make: "directive-for-escape.mk" line 106: . $(i): inner +make: "directive-for-escape.mk" line 107: . $(i:M*): inner +make: "directive-for-escape.mk" line 108: . ${i${:U}}: outer +make: "directive-for-escape.mk" line 109: . ${i\}}: inner} +make: "directive-for-escape.mk" line 110: . ${i2}: two +make: "directive-for-escape.mk" line 111: . ${i,}: comma +make: "directive-for-escape.mk" line 112: . adjacent: innerinnerinnerinner +For: end for 1 +For: loop body: +. info eight $$$$$$$$ and no cents. +. info eight ${:Udollar}${:Udollar}${:Udollar}${:Udollar} and no cents. +make: "directive-for-escape.mk" line 120: eight $$$$ and no cents. +make: "directive-for-escape.mk" line 121: eight dollardollardollardollar and no cents. +make: "directive-for-escape.mk" line 130: eight and no cents. +For: end for 1 +make: "directive-for-escape.mk" line 137: newline in .for value +make: "directive-for-escape.mk" line 137: newline in .for value +For: loop body: +. info short: ${:U" "} +. info long: ${:U" "} +make: "directive-for-escape.mk" line 138: short: " " +make: "directive-for-escape.mk" line 139: long: " " +make: Fatal errors encountered -- cannot continue +make: stopped in unit-tests +exit status 1 diff --git a/contrib/bmake/unit-tests/directive-for-escape.mk b/contrib/bmake/unit-tests/directive-for-escape.mk index babc4b8c6e88..725fa85d68c3 100644 --- a/contrib/bmake/unit-tests/directive-for-escape.mk +++ b/contrib/bmake/unit-tests/directive-for-escape.mk @@ -1,113 +1,142 @@ -# $NetBSD: directive-for-escape.mk,v 1.7 2021/02/15 07:58:19 rillig Exp $ +# $NetBSD: directive-for-escape.mk,v 1.12 2021/12/05 11:40:03 rillig Exp $ # # Test escaping of special characters in the iteration values of a .for loop. # These values get expanded later using the :U variable modifier, and this # escaping and unescaping must pass all characters and strings effectively # unmodified. .MAKEFLAGS: -df # Even though the .for loops take quotes into account when splitting the # string into words, the quotes don't need to be balanced, as of 2020-12-31. # This could be considered a bug. ASCII= !"\#$$%&'()*+,-./0-9:;<=>?@A-Z[\]_^a-z{|}~ # XXX: As of 2020-12-31, the '#' is not preserved in the expanded body of -# the loop since it would not need only the escaping for the :U variable -# modifier but also the escaping for the line-end comment. +# the loop. Not only would it need the escaping for the variable modifier +# ':U' but also the escaping for the line-end comment. .for chars in ${ASCII} . info ${chars} .endfor # As of 2020-12-31, using 2 backslashes before be '#' would treat the '#' # as comment character. Using 3 backslashes doesn't help either since # then the situation is essentially the same as with 1 backslash. # This means that a '#' sign cannot be passed in the value of a .for loop # at all. ASCII.2020-12-31= !"\\\#$$%&'()*+,-./0-9:;<=>?@A-Z[\]_^a-z{|}~ .for chars in ${ASCII.2020-12-31} . info ${chars} .endfor -# Cover the code in for_var_len. +# Cover the code in ExprLen. # # XXX: It is unexpected that the variable V gets expanded in the loop body. -# The double '$$' should prevent exactly this. Probably nobody was -# adventurous enough to use literal dollar signs in the values of a .for -# loop. +# The double '$$' should intuitively prevent exactly this. Probably nobody +# was adventurous enough to use literal dollar signs in the values of a .for +# loop, allowing this edge case to go unnoticed for years. +# +# See for.c, function ExprLen. V= value VALUES= $$ $${V} $${V:=-with-modifier} $$(V) $$(V:=-with-modifier) .for i in ${VALUES} . info $i .endfor -# Try to cover the code for nested '{}' in for_var_len, without success. +# Try to cover the code for nested '{}' in ExprLen, without success. # # The value of the variable VALUES is not meant to be a variable expression. # Instead, it is meant to represent literal text, the only escaping mechanism # being that each '$' is written as '$$'. # # The .for loop splits ${VALUES} into 3 words, at the space characters, since # these are not escaped. VALUES= $${UNDEF:U\$$\$$ {{}} end} # XXX: Where in the code does the '\$\$' get converted into a single '\$'? .for i in ${VALUES} . info $i .endfor -# Second try to cover the code for nested '{}' in for_var_len. +# Second try to cover the code for nested '{}' in ExprLen. # -# XXX: It is wrong that for_var_len requires the braces to be balanced. +# XXX: It is wrong that ExprLen requires the braces to be balanced. # Each variable modifier has its own inconsistent way of parsing nested # variable expressions, braces and parentheses. (Compare ':M', ':S', and # ':D' for details.) The only sensible thing to do is therefore to let # Var_Parse do all the parsing work. VALUES= begin<$${UNDEF:Ufallback:N{{{}}}}>end .for i in ${VALUES} . info $i .endfor # A single trailing dollar doesn't happen in practice. # The dollar sign is correctly passed through to the body of the .for loop. # There, it is expanded by the .info directive, but even there a trailing # dollar sign is kept as-is. .for i in ${:U\$} . info ${i} .endfor # As of 2020-12-31, the name of the iteration variable can even contain # colons, which then affects variable expressions having this exact modifier. # This is clearly an unintended side effect of the implementation. NUMBERS= one two three .for NUMBERS:M*e in replaced . info ${NUMBERS} ${NUMBERS:M*e} .endfor # As of 2020-12-31, the name of the iteration variable can contain braces, # which gets even more surprising than colons, since it allows to replace # sequences of variable expressions. There is no practical use case for # this, though. BASENAME= one EXT= .c .for BASENAME}${EXT in replaced . info ${BASENAME}${EXT} .endfor # Demonstrate the various ways to refer to the iteration variable. i= outer i2= two i,= comma .for i in inner . info . $$i: $i . info . $${i}: ${i} . info . $${i:M*}: ${i:M*} . info . $$(i): $(i) . info . $$(i:M*): $(i:M*) . info . $${i$${:U}}: ${i${:U}} . info . $${i\}}: ${i\}} # XXX: unclear why ForLoop_SubstVarLong needs this . info . $${i2}: ${i2} . info . $${i,}: ${i,} . info . adjacent: $i${i}${i:M*}$i .endfor +# The variable name can be a single '$' since there is no check on valid +# variable names. ForLoop_SubstVarShort skips "stupid" variable names though, +# but ForLoop_SubstVarLong naively parses the body of the loop, substituting +# each '${$}' with an actual 'dollar'. +.for $ in dollar +. info eight $$$$$$$$ and no cents. +. info eight ${$}${$}${$}${$} and no cents. +.endfor +# Outside a .for loop, '${$}' is interpreted differently. The outer '$' starts +# a variable expression. The inner '$' is followed by a '}' and is thus a +# silent syntax error, the '$' is skipped. The variable name is thus '', and +# since since there is never a variable named '', the whole expression '${$}' +# evaluates to an empty string. +closing-brace= } # guard against an +${closing-brace}= # alternative interpretation +.info eight ${$}${$}${$}${$} and no cents. + +# What happens if the values from the .for loop contain a literal newline? +# Before for.c 1.144 from 2021-06-25, the newline was passed verbatim to the +# body of the .for loop, where it was then interpreted as a literal newline, +# leading to syntax errors such as "Unclosed variable expression" in the upper +# line and "Invalid line type" in the lower line. +.for i in "${.newline}" +. info short: $i +. info long: ${i} +.endfor + all: diff --git a/contrib/bmake/unit-tests/directive-for-if.exp b/contrib/bmake/unit-tests/directive-for-if.exp new file mode 100644 index 000000000000..85bfc484856b --- /dev/null +++ b/contrib/bmake/unit-tests/directive-for-if.exp @@ -0,0 +1,8 @@ +make: "directive-for-if.mk" line 48: if-less endif +make: "directive-for-if.mk" line 48: if-less endif +make: "directive-for-if.mk" line 48: if-less endif +VAR1 +VAR3 +make: Fatal errors encountered -- cannot continue +make: stopped in unit-tests +exit status 1 diff --git a/contrib/bmake/unit-tests/directive-for-if.mk b/contrib/bmake/unit-tests/directive-for-if.mk new file mode 100644 index 000000000000..8d73e8ae8c4d --- /dev/null +++ b/contrib/bmake/unit-tests/directive-for-if.mk @@ -0,0 +1,86 @@ +# $NetBSD: directive-for-if.mk,v 1.1 2021/08/30 17:08:13 rillig Exp $ +# +# Test for a .for directive that contains an .if directive. +# +# Before for.c 1.39 from 2008-12-21, when expanding the variables of a .for +# loop, their values were placed verbatim in the expanded body. Since then, +# each variable value expands to an expression of the form ${:Uvalue}. +# +# Before that change, the following adventurous code was possible: +# +# .for directive in if ifdef ifndef +# . ${directive} "1" != "0" +# . endif +# .endfor +# +# A more practical usage of the .for loop that often led to surprises was the +# following: +# +# .for var in VAR1 VAR2 VAR3 +# . if ${var} != "VAR2" +# . endif +# .endfor +# +# The .for loop body expanded to this string: +# +# . if VAR1 != "VAR2" +# . endif +# +# Since bare words were not allowed at the left-hand side of a condition, +# make complained about a "Malformed conditional", which was surprising since +# the code before expanding the .for loop body looked quite well. +# +# In cond.c 1.48 from 2008-11-29, just a month before the expansion of .for +# loops changed from plain textual value to using expressions of the form +# ${:Uvalue}, this surprising behavior was documented in the code, and a +# workaround was implemented that allowed bare words when they are followed +# by either '!' or '=', as part of the operators '!=' or '=='. +# +# Since cond.c 1.68 from 2015-05-05, bare words are allowed on the left-hand +# side of a condition, but that applies only to expression of the form +# ${${cond} :? then : else}, it does not apply to conditions in ordinary .if +# directives. + +# The following snippet worked in 2005, when the variables from the .for loop +# expanded to their bare textual value. +.for directive in if ifdef ifndef +. ${directive} "1" != "0" +. endif +.endfor +# In 2021, the above code does not generate an error message, even though the +# code looks clearly malformed. This is due to the '!', which is interpreted +# as a dependency operator, similar to ':' and '::'. The parser turns this +# line into a dependency with the 3 targets '.', 'if', '"1"' and the 2 sources +# '=' and '"0"'. Since that line is not interpreted as an '.if' directive, +# the error message 'if-less endif' makes sense. + +# In 2005, make complained: +# +# .if line: Malformed conditional (VAR1 != "VAR2") +# .endif line: if-less endif +# .endif line: Need an operator +# +# 2008.11.30.22.37.55 does not complain about the left-hand side ${var}. +.for var in VAR1 VAR2 VAR3 +. if ${var} != "VAR2" +_!= echo "${var}" 1>&2; echo # In 2005, '.info' was not invented yet. +. endif +.endfor + +# Before for.c 1.39 from 2008-12-21, a common workaround was to surround the +# variable expression from the .for loop with '"'. Such a string literal +# has been allowed since cond.c 1.23 from 2004-04-13. Between that commit and +# the one from 2008, the parser would still get confused if the value from the +# .for loop contained '"', which was effectively a code injection. +# +# Surrounding ${var} with quotes disabled the check for typos though. For +# ordinary variables, referring to an undefined variable on the left-hand side +# of the comparison resulted in a "Malformed conditional". Since the .for +# loop was usually close to the .if clause, this was not a problem in +# practice. +.for var in VAR1 VAR2 VAR3 +. if "${var}" != "VAR2" +. endif +.endfor + +all: diff --git a/contrib/bmake/unit-tests/directive-for-null.exp b/contrib/bmake/unit-tests/directive-for-null.exp index 37a7d68925ed..dee26de25e63 100644 --- a/contrib/bmake/unit-tests/directive-for-null.exp +++ b/contrib/bmake/unit-tests/directive-for-null.exp @@ -1,10 +1,10 @@ make: "(stdin)" line 2: Zero byte read from file -make: "(stdin)" line 2: Unexpected end of file in for loop. +make: "(stdin)" line 2: Unexpected end of file in .for loop make: "(stdin)" line 3: Zero byte read from file make: Fatal errors encountered -- cannot continue make: stopped in unit-tests *** Error code 1 (continuing) Stop. make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/directive-include.exp b/contrib/bmake/unit-tests/directive-include.exp index af56eefb2b88..b339f393e7e8 100755 --- a/contrib/bmake/unit-tests/directive-include.exp +++ b/contrib/bmake/unit-tests/directive-include.exp @@ -1,8 +1,11 @@ CondParser_Eval: ${.MAKE.MAKEFILES:T} != "${.PARSEFILE} null" lhs = "directive-include.mk null", rhs = "directive-include.mk null", op = != CondParser_Eval: ${.MAKE.MAKEFILES:T} != "${.PARSEFILE} null" lhs = "directive-include.mk null", rhs = "directive-include.mk null", op = != make: "directive-include.mk" line 25: Could not find nonexistent.mk +make: "directive-include.mk" line 47: Could not find " +make: "directive-include.mk" line 52: Unknown modifier "Z" +make: "directive-include.mk" line 52: Could not find nonexistent.mk make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/directive-include.mk b/contrib/bmake/unit-tests/directive-include.mk index d36914b25a63..a6b300b3d273 100755 --- a/contrib/bmake/unit-tests/directive-include.mk +++ b/contrib/bmake/unit-tests/directive-include.mk @@ -1,34 +1,54 @@ -# $NetBSD: directive-include.mk,v 1.5 2020/11/21 14:59:11 rillig Exp $ +# $NetBSD: directive-include.mk,v 1.7 2021/12/03 22:48:07 rillig Exp $ # # Tests for the .include directive, which includes another file. # TODO: Implementation .MAKEFLAGS: -dc # All included files are recorded in the variable .MAKE.MAKEFILES. # In this test, only the basenames of the files are compared since # the directories can differ. .include "/dev/null" .if ${.MAKE.MAKEFILES:T} != "${.PARSEFILE} null" . error .endif # Each file is recorded only once in the variable .MAKE.MAKEFILES. # Between 2015-11-26 and 2020-10-31, the very last file could be repeated, # due to an off-by-one bug in ParseTrackInput. .include "/dev/null" .if ${.MAKE.MAKEFILES:T} != "${.PARSEFILE} null" . error .endif .include "nonexistent.mk" .include "/dev/null" # size 0 # including a directory technically succeeds, but shouldn't. #.include "." # directory # As of 2020-11-21, anything after the delimiter '"' is ignored. .include "/dev/null" and ignore anything in the rest of the line. +# The filename to be included can contain expressions. +DEV= null +.include "/dev/${DEV}" + +# Expressions in double quotes or angle quotes are first parsed naively, to +# find the closing '"'. In a second step, the expressions are expanded. This +# means that the expressions cannot include the characters '"' or '>'. This +# restriction is not practically relevant since the expressions inside +# '.include' directives are typically kept as simple as possible. +# +# If the whole line were expanded before parsing, the filename to be included +# would be empty, and the closing '"' would be in the trailing part of the +# line, which is ignored as of 2021-12-03. +DQUOT= " +.include "${DQUOT}" + +# When the expression in a filename cannot be evaluated, the failing +# expression is skipped and the file is included nevertheless. +# FIXME: Add proper error handling, no file must be included here. +.include "nonexistent${:U123:Z}.mk" + all: - @:; diff --git a/contrib/bmake/unit-tests/export.mk b/contrib/bmake/unit-tests/export.mk index 94e3a862dce1..bab08ee3ea23 100644 --- a/contrib/bmake/unit-tests/export.mk +++ b/contrib/bmake/unit-tests/export.mk @@ -1,46 +1,46 @@ -# $NetBSD: export.mk,v 1.10 2020/10/24 08:50:17 rillig Exp $ +# $NetBSD: export.mk,v 1.11 2021/12/05 14:57:36 rillig Exp $ UT_TEST= export UT_FOO= foo${BAR} UT_FU= fubar UT_ZOO= hoopie UT_NO= all # believe it or not, we expect this one to come out with $UT_FU unexpanded. UT_DOLLAR= This is $$UT_FU .export UT_FU UT_FOO .export UT_DOLLAR .if !defined(.MAKE.PID) . error .MAKE.PID must be defined .endif @= at %= percent *= asterisk ${:U!}= exclamation # A direct != would try to run "exclamation" # as a shell command and assign its output # to the empty variable. &= ampersand # This is ignored because it is internal. .export .MAKE.PID # These are ignored because they are local to the target. .export @ .export % .export * .export ! # This is exported (see the .rawout file) but not displayed since the dash # shell filters it out. To reach consistent output for each shell, the # ampersand is filtered out already by FILTER_CMD. .export & # This is ignored because it is undefined. .export UNDEFINED BAR= bar is ${UT_FU} .MAKE.EXPORTED+= UT_ZOO UT_TEST -FILTER_CMD?= egrep -v '^(MAKEFLAGS|MALLOC_OPTIONS|PATH|PWD|SHLVL|_|&)=' +FILTER_CMD?= egrep -v '^(MAKEFLAGS|MALLOC_.*|PATH|PWD|SHLVL|_|&)=' all: @env | ${FILTER_CMD} | sort diff --git a/contrib/bmake/unit-tests/job-output-null.exp b/contrib/bmake/unit-tests/job-output-null.exp index af9b4e64dba3..631d4862af44 100644 --- a/contrib/bmake/unit-tests/job-output-null.exp +++ b/contrib/bmake/unit-tests/job-output-null.exp @@ -1,4 +1,4 @@ -hello -hello -hello world without newline, hello world without newline, hello world without newline. +1 +2a +3a without newline, 3b without newline. exit status 0 diff --git a/contrib/bmake/unit-tests/job-output-null.mk b/contrib/bmake/unit-tests/job-output-null.mk index 7620bdf6a7ba..1efd9c667980 100644 --- a/contrib/bmake/unit-tests/job-output-null.mk +++ b/contrib/bmake/unit-tests/job-output-null.mk @@ -1,32 +1,45 @@ -# $NetBSD: job-output-null.mk,v 1.1 2021/04/15 19:02:29 rillig Exp $ +# $NetBSD: job-output-null.mk,v 1.3 2021/09/12 10:26:49 rillig Exp $ # # Test how null bytes in the output of a command are handled. Make processes # them using null-terminated strings, which may cut off some of the output. # # As of 2021-04-15, make handles null bytes from the child process # inconsistently. It's an edge case though since typically the child # processes output text. +# Note: The printf commands used in this test must only use a single format +# string, without parameters. This is because it is implementation-dependent +# how many times the command 'printf "fmt%s" "" "" ""' calls write(2). +# +# NetBSD /bin/sh 1 x write("fmtfmtfmt") +# Dash 1 x write("fmtfmtfmt") +# NetBSD /bin/ksh 3 x write("fmt") (via /bin/printf) +# Bash 5 3 x write("fmt") +# +# In the latter case the output may arrive in parts, which in this test makes +# a crucial difference since the outcome of the test depends on whether there +# is a '\n' in each of the blocks from the output. + .MAKEFLAGS: -j1 # force jobs mode all: .PHONY # The null byte from the command output is kept as-is. # See CollectOutput, which looks like it intended to replace these # null bytes with simple spaces. - @printf 'hello\0world%s\n' '' + @printf '1\0trailing\n' # Give the parent process a chance to see the above output, but not # yet the output from the next printf command. @sleep 1 # All null bytes from the command output are kept as-is. - @printf 'hello\0world%s\n' '' '' '' '' '' '' + @printf '2a\0trailing\n''2b\0trailing\n''2c\0trailing\n' @sleep 1 # The null bytes are replaced with spaces since they are not followed # by a newline. # # The three null bytes in a row test whether this output is # compressed to a single space like in DebugFailedTarget. It isn't. - @printf 'hello\0world\0without\0\0\0newline%s' ', ' ', ' '.' + @printf '3a\0without\0\0\0newline, 3b\0without\0\0\0newline.' diff --git a/contrib/bmake/unit-tests/lint.exp b/contrib/bmake/unit-tests/lint.exp index d7068b5e006a..db2290c040cd 100755 --- a/contrib/bmake/unit-tests/lint.exp +++ b/contrib/bmake/unit-tests/lint.exp @@ -1,4 +1,4 @@ -make: In the :@ modifier of "VAR", the variable name "${:Ubar:S,b,v,}" must not contain a dollar. +make: In the :@ modifier of "VAR", the variable name "${:Ubar:S,b,v,}" must not contain a dollar y@:Q} xvaluey exit status 2 diff --git a/contrib/bmake/unit-tests/objdir-writable.exp b/contrib/bmake/unit-tests/objdir-writable.exp index 9c507f647f8c..e7298a66d369 100644 --- a/contrib/bmake/unit-tests/objdir-writable.exp +++ b/contrib/bmake/unit-tests/objdir-writable.exp @@ -1,5 +1,5 @@ make warning: TMPDIR/roobj: Permission denied. -/tmp +TMPDIR TMPDIR/roobj TMPDIR/roobj exit status 0 diff --git a/contrib/bmake/unit-tests/objdir-writable.mk b/contrib/bmake/unit-tests/objdir-writable.mk index 9fc1c69afb56..b09baa3c32b2 100644 --- a/contrib/bmake/unit-tests/objdir-writable.mk +++ b/contrib/bmake/unit-tests/objdir-writable.mk @@ -1,31 +1,32 @@ -# $NetBSD: objdir-writable.mk,v 1.4 2020/11/14 07:36:00 sjg Exp $ +# $NetBSD: objdir-writable.mk,v 1.5 2021/07/04 01:28:54 sjg Exp $ # test checking for writable objdir -RO_OBJDIR?= ${TMPDIR:U/tmp}/roobj +TMPDIR?= /tmp +RO_OBJDIR?= ${TMPDIR}/roobj .if make(do-objdir) # this should succeed .OBJDIR: ${RO_OBJDIR} do-objdir: .else all: no-objdir ro-objdir explicit-objdir # make it now x!= echo; mkdir -p ${RO_OBJDIR}; chmod 555 ${RO_OBJDIR} .END: rm-objdir rm-objdir: @rmdir ${RO_OBJDIR} no-objdir: - @MAKEOBJDIR=${RO_OBJDIR} ${.MAKE} -r -f /dev/null -C /tmp -V .OBJDIR + @MAKEOBJDIR=${RO_OBJDIR} ${.MAKE} -r -f /dev/null -C ${TMPDIR} -V .OBJDIR ro-objdir: - @MAKEOBJDIR=${RO_OBJDIR} ${.MAKE} -r -f /dev/null -C /tmp -V .OBJDIR MAKE_OBJDIR_CHECK_WRITABLE=no + @MAKEOBJDIR=${RO_OBJDIR} ${.MAKE} -r -f /dev/null -C ${TMPDIR} -V .OBJDIR MAKE_OBJDIR_CHECK_WRITABLE=no explicit-objdir: - @MAKEOBJDIR=/tmp ${.MAKE} -r -f ${MAKEFILE:tA} -C /tmp do-objdir -V .OBJDIR + @MAKEOBJDIR=${TMPDIR} ${.MAKE} -r -f ${MAKEFILE:tA} -C ${TMPDIR} do-objdir -V .OBJDIR .endif diff --git a/contrib/bmake/unit-tests/opt-debug-errors-jobs.exp b/contrib/bmake/unit-tests/opt-debug-errors-jobs.exp index 25eb2b470b72..c957c7736b32 100644 --- a/contrib/bmake/unit-tests/opt-debug-errors-jobs.exp +++ b/contrib/bmake/unit-tests/opt-debug-errors-jobs.exp @@ -1,48 +1,58 @@ echo '3 spaces'; false 3 spaces *** Failed target: fail-spaces *** Failed commands: echo '3 spaces'; false *** [fail-spaces] Error code 1 make: stopped in unit-tests echo \ indented; false indented *** Failed target: fail-escaped-space *** Failed commands: echo \ indented; false *** [fail-escaped-space] Error code 1 make: stopped in unit-tests echo 'line1 line2'; false line1 line2 *** Failed target: fail-newline *** Failed commands: echo 'line1${.newline}line2'; false + => echo 'line1 +line2'; false *** [fail-newline] Error code 1 make: stopped in unit-tests echo 'line1 line2'; false line1 line2 *** Failed target: fail-multiline *** Failed commands: echo 'line1 line2'; false *** [fail-multiline] Error code 1 make: stopped in unit-tests echo 'word1' 'word2'; false word1 word2 *** Failed target: fail-multiline-intention *** Failed commands: echo 'word1' 'word2'; false *** [fail-multiline-intention] Error code 1 +make: stopped in unit-tests + +*** Failed target: fail-vars +*** Failed commands: + @${COMPILE_C} ${COMPILE_C_FLAGS} + => @false c-compiler flag1 -macro="several words" +*** [fail-vars] Error code 1 + make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/opt-debug-errors-jobs.mk b/contrib/bmake/unit-tests/opt-debug-errors-jobs.mk index 83b50987a752..007a5f37e08a 100644 --- a/contrib/bmake/unit-tests/opt-debug-errors-jobs.mk +++ b/contrib/bmake/unit-tests/opt-debug-errors-jobs.mk @@ -1,36 +1,48 @@ -# $NetBSD: opt-debug-errors-jobs.mk,v 1.1 2021/04/27 16:20:06 rillig Exp $ +# $NetBSD: opt-debug-errors-jobs.mk,v 1.2 2021/11/27 23:56:11 rillig Exp $ # # Tests for the -de command line option, which adds debug logging for # failed commands and targets; since 2021-04-27 also in jobs mode. .MAKEFLAGS: -de -j1 all: fail-spaces all: fail-escaped-space all: fail-newline all: fail-multiline all: fail-multiline-intention +all: fail-vars fail-spaces: echo '3 spaces'; false fail-escaped-space: echo \ indented; false fail-newline: echo 'line1${.newline}line2'; false # The line continuations in multiline commands are turned into an ordinary # space before the command is actually run. fail-multiline: echo 'line1\ line2'; false # It is a common style to align the continuation backslashes at the right # of the lines, usually at column 73. All spaces before the continuation # backslash are preserved and are usually outside a shell word and thus # irrelevant. Since "usually" is not "always", these space characters are # not merged into a single space. fail-multiline-intention: echo 'word1' \ 'word2'; false + +# In makefiles that rely heavily on abstracted variables, it is not possible +# to determine the actual command from the unexpanded command alone. To help +# debugging these issues (for example in NetBSD's build.sh), output the +# expanded command as well whenever it differs from the unexpanded command. +# Since 2021-11-28. +COMPILE_C= false c-compiler +COMPILE_C_DEFS= macro="several words" +COMPILE_C_FLAGS=flag1 ${COMPILE_C_DEFS:@def@-${def}@} +fail-vars: + @${COMPILE_C} ${COMPILE_C_FLAGS} diff --git a/contrib/bmake/unit-tests/opt-debug-graph1.exp b/contrib/bmake/unit-tests/opt-debug-graph1.exp index 4d4aa0c3faea..4049900fee75 100644 --- a/contrib/bmake/unit-tests/opt-debug-graph1.exp +++ b/contrib/bmake/unit-tests/opt-debug-graph1.exp @@ -1,53 +1,52 @@ #*** Input graph: # all, unmade, type OP_DEPENDS|OP_HAS_COMMANDS, flags none # made-target, unmade, type OP_DEPENDS, flags none # made-target-no-sources, unmade, type OP_DEPENDS, flags none # made-source, unmade, type OP_DEPENDS, flags none # unmade-target, unmade, type OP_DEPENDS, flags none # unmade-sources, unmade, type none, flags none # unmade-silent-source, unmade, type OP_SILENT, flags none # unmade-target-no-sources, unmade, type OP_DEPENDS, flags none # # Files that are only sources: # unmade-sources [unmade-sources] # unmade-silent-source [unmade-silent-source] .SILENT #*** Global Variables: .ALLTARGETS = all made-target made-target-no-sources made-source unmade-target unmade-sources unmade-silent-source unmade-target-no-sources .CURDIR = .INCLUDES = .LIBS = .MAKE =
.MAKE.DEPENDFILE =
.MAKE.GID =
.MAKE.LEVEL =
.MAKE.MAKEFILES =
.MAKE.MAKEFILE_PREFERENCE =
.MAKE.OS =
.MAKE.PID =
.MAKE.PPID =
.MAKE.UID =
.MAKEFLAGS = -r -k -d g1 .MAKEOVERRIDES = .OBJDIR = .PATH = . .TARGETS = .newline = MACHINE =
MACHINE_ARCH =
MAKE =
MFLAGS = -r -k -d g1 #*** Command-line Variables: .MAKE.LEVEL.ENV = MAKELEVEL #*** Directory Cache: # Stats: 0 hits 2 misses 0 near misses 0 losers (0%) # refs hits directory # 1 0 -# 1 0 . #*** Suffixes: #*** Transformations: exit status 0 diff --git a/contrib/bmake/unit-tests/opt-debug-graph2.exp b/contrib/bmake/unit-tests/opt-debug-graph2.exp index 03f02719618e..675e5e8cac18 100644 --- a/contrib/bmake/unit-tests/opt-debug-graph2.exp +++ b/contrib/bmake/unit-tests/opt-debug-graph2.exp @@ -1,91 +1,90 @@ : 'Making made-target.' false *** Error code 1 (continuing) false *** Error code 1 (continuing) `all' not remade because of errors. #*** Input graph: # made-target, made, type OP_DEPENDS|OP_PHONY|OP_HAS_COMMANDS|OP_DEPS_FOUND|OP_MARK, flags REMAKE|DONE_ALLSRC # # *** MAIN TARGET *** # No unmade children # last modified : made # parents: all made-target : (null) # error-target, error when made, type OP_DEPENDS|OP_PHONY|OP_HAS_COMMANDS|OP_DEPS_FOUND|OP_MARK, flags REMAKE|DONE_ALLSRC # # No unmade children # nonexistent (maybe): error when made # parents: all error-target : (null) # aborted-target, aborted, type OP_DEPENDS|OP_PHONY|OP_DEPS_FOUND|OP_MARK, flags none # aborted-target-dependency, error when made, type OP_DEPENDS|OP_PHONY|OP_HAS_COMMANDS|OP_DEPS_FOUND|OP_MARK, flags REMAKE|DONE_ALLSRC # # No unmade children # nonexistent (maybe): error when made # parents: aborted-target aborted-target-dependency: (null) # all, aborted, type OP_DEPENDS|OP_DEPS_FOUND, flags CHILDMADE|FORCE # # 3 unmade children # nonexistent (maybe): aborted all : made-target error-target aborted-target # .END, unmade, type OP_SPECIAL, flags none # # Files that are only sources: # .END [.END] #*** Global Variables: .ALLTARGETS = made-target error-target aborted-target aborted-target-dependency all .END .CURDIR = .INCLUDES = .LIBS = .MAKE =
.MAKE.DEPENDFILE =
.MAKE.GID =
.MAKE.LEVEL =
.MAKE.MAKEFILES =
.MAKE.MAKEFILE_PREFERENCE =
.MAKE.OS =
.MAKE.PID =
.MAKE.PPID =
.MAKE.UID =
.MAKEFLAGS = -r -k -d g2 .MAKEOVERRIDES = .OBJDIR = .PATH = . .TARGETS = all .newline = MACHINE =
MACHINE_ARCH =
MAKE =
MFLAGS = -r -k -d g2 #*** Command-line Variables: .MAKE.LEVEL.ENV = MAKELEVEL .SHELL =
#*** Directory Cache: # Stats: 0 hits 4 misses 0 near misses 0 losers (0%) # refs hits directory # 1 0 -# 1 0 . #*** Suffixes: #*** Transformations: Stop. make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/opt-debug-graph3.exp b/contrib/bmake/unit-tests/opt-debug-graph3.exp index f2966442eb26..78edb59e4e02 100644 --- a/contrib/bmake/unit-tests/opt-debug-graph3.exp +++ b/contrib/bmake/unit-tests/opt-debug-graph3.exp @@ -1,91 +1,90 @@ : 'Making made-target.' false *** Error code 1 (continuing) false *** Error code 1 (continuing) `all' not remade because of errors. #*** Input graph: # made-target, made, type OP_DEPENDS|OP_PHONY|OP_HAS_COMMANDS|OP_DEPS_FOUND|OP_MARK, flags REMAKE|DONE_ALLSRC # # *** MAIN TARGET *** # No unmade children # last modified : made # parents: all made-target : (null) # error-target, error when made, type OP_DEPENDS|OP_PHONY|OP_HAS_COMMANDS|OP_DEPS_FOUND|OP_MARK, flags REMAKE|DONE_ALLSRC # # No unmade children # nonexistent (maybe): error when made # parents: all error-target : (null) # aborted-target, aborted, type OP_DEPENDS|OP_PHONY|OP_DEPS_FOUND|OP_MARK, flags none # aborted-target-dependency, error when made, type OP_DEPENDS|OP_PHONY|OP_HAS_COMMANDS|OP_DEPS_FOUND|OP_MARK, flags REMAKE|DONE_ALLSRC # # No unmade children # nonexistent (maybe): error when made # parents: aborted-target aborted-target-dependency: (null) # all, aborted, type OP_DEPENDS|OP_DEPS_FOUND, flags CHILDMADE|FORCE # # 3 unmade children # nonexistent (maybe): aborted all : made-target error-target aborted-target # .END, unmade, type OP_SPECIAL, flags none # # Files that are only sources: # .END [.END] #*** Global Variables: .ALLTARGETS = made-target error-target aborted-target aborted-target-dependency all .END .CURDIR = .INCLUDES = .LIBS = .MAKE =
.MAKE.DEPENDFILE =
.MAKE.GID =
.MAKE.LEVEL =
.MAKE.MAKEFILES =
.MAKE.MAKEFILE_PREFERENCE =
.MAKE.OS =
.MAKE.PID =
.MAKE.PPID =
.MAKE.UID =
.MAKEFLAGS = -r -k -d g3 .MAKEOVERRIDES = .OBJDIR = .PATH = . .TARGETS = all .newline = MACHINE =
MACHINE_ARCH =
MAKE =
MFLAGS = -r -k -d g3 #*** Command-line Variables: .MAKE.LEVEL.ENV = MAKELEVEL .SHELL =
#*** Directory Cache: # Stats: 0 hits 4 misses 0 near misses 0 losers (0%) # refs hits directory # 1 0 -# 1 0 . #*** Suffixes: #*** Transformations: Stop. make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/opt-file.mk b/contrib/bmake/unit-tests/opt-file.mk index b7a1c09e6d16..edeff4b9ab11 100644 --- a/contrib/bmake/unit-tests/opt-file.mk +++ b/contrib/bmake/unit-tests/opt-file.mk @@ -1,105 +1,109 @@ -# $NetBSD: opt-file.mk,v 1.12 2021/04/04 10:13:09 rillig Exp $ +# $NetBSD: opt-file.mk,v 1.14 2021/12/09 20:47:33 rillig Exp $ # -# Tests for the -f command line option. +# Tests for the -f command line option, which adds a makefile to the list of +# files that are parsed. # TODO: Implementation all: .PHONY all: file-ending-in-backslash all: file-ending-in-backslash-mmap all: line-with-trailing-whitespace all: file-containing-null-byte -# Passing '-' as the filename reads from stdin. This is unusual but possible. +# When the filename is '-', the input comes from stdin. This is unusual but +# possible. # # In the unlikely case where a file ends in a backslash instead of a newline, # that backslash is trimmed. See ParseGetLine. # # make-2014.01.01.00.00.00 invoked undefined behavior, reading text from # outside of the file buffer. # # printf '%s' 'VAR=value\' \ -# | MALLOC_OPTIONS=JA make-2014.01.01.00.00.00 -r -f - -V VAR -dA 2>&1 \ +# | MALLOC_OPTIONS="JA" \ +# MALLOC_CONF="junk:true" \ +# make-2014.01.01.00.00.00 -r -f - -V VAR -dA 2>&1 \ # | less # # The debug output shows how make happily uses freshly allocated memory (the # ) and already freed memory ('Z'). # # ParseReadLine (1): 'VAR=value\' # Global:VAR = value\value\ # ParseReadLine (2): 'alue\' # ParseDependency(alue\) # make-2014.01.01.00.00.00: "(stdin)" line 2: Need an operator # ParseReadLine (3): 'ZZZZZZZZZZZZZZZZ' # ParseDependency(ZZZZZZZZZZZZZZZZ) # file-ending-in-backslash: .PHONY @printf '%s' 'VAR=value\' \ | ${MAKE} -r -f - -V VAR # Between parse.c 1.170 from 2010-12-25 and parse.c 1.511 from 2020-12-22, # there was an out-of-bounds write in ParseGetLine, where line_end pointed at # the end of the allocated buffer, in the special case where loadedfile_mmap # had not added the final newline character. file-ending-in-backslash-mmap: .PHONY @printf '%s' 'VAR=value\' > opt-file-backslash @${MAKE} -r -f opt-file-backslash -V VAR @rm opt-file-backslash # Since parse.c 1.511 from 2020-12-22, an assertion in ParseGetLine failed # for lines that contained trailing whitespace. Worked around in parse.c # 1.513, properly fixed in parse.c 1.514. line-with-trailing-whitespace: .PHONY @printf '%s' 'VAR=$@ ' > opt-file-trailing-whitespace @${MAKE} -r -f opt-file-trailing-whitespace -V VAR @rm opt-file-trailing-whitespace # If a makefile contains null bytes, it is an error. Throughout the history # of make, the behavior has changed several times, sometimes intentionally, # sometimes by accident. # # echo 'VAR=value' | tr 'l' '\0' > zero-byte.in # printf '%s\n' 'all:' ': VAR=${VAR:Q}' >> zero-byte.in # # for year in $(seq 2003 2020); do # echo $year: # make-$year.01.01.00.00.00 -r -f zero-byte.in # echo "exit status $?" # echo # done 2>&1 \ # | sed "s,$PWD/,.," # # This program generated the following output: # # 2003 to 2007: # exit status 0 # # 2008 to 2010: # make: "zero-byte.in" line 1: Zero byte read from file # make: Fatal errors encountered -- cannot continue # # make: stopped in . # exit status 1 # # 2011 to 2013: # make: no target to make. # # make: stopped in . # exit status 2 # # 2014 to 2020-12-06: # make: "zero-byte.in" line 1: warning: Zero byte read from file, skipping rest of line. # exit status 0 # # Since 2020-12-07: # make: "zero-byte.in" line 1: Zero byte read from file # make: Fatal errors encountered -- cannot continue # make: stopped in . # exit status 1 file-containing-null-byte: .PHONY @printf '%s\n' 'VAR=value' 'VAR2=VALUE2' \ | tr 'l' '\0' \ | ${MAKE} -r -f - -V VAR -V VAR2 all: : Making ${.TARGET} diff --git a/contrib/bmake/unit-tests/opt-tracefile.exp b/contrib/bmake/unit-tests/opt-tracefile.exp index 39a9383953dd..0e815606d34f 100644 --- a/contrib/bmake/unit-tests/opt-tracefile.exp +++ b/contrib/bmake/unit-tests/opt-tracefile.exp @@ -1 +1,12 @@ +Making dependency1 from . +Making dependency2 from . +Making trace from dependency1 dependency2. +0 BEG +1 JOB +1 DON +1 JOB +1 DON +1 JOB +1 DON +0 END exit status 0 diff --git a/contrib/bmake/unit-tests/opt-tracefile.mk b/contrib/bmake/unit-tests/opt-tracefile.mk index b62392ca913c..291824680606 100644 --- a/contrib/bmake/unit-tests/opt-tracefile.mk +++ b/contrib/bmake/unit-tests/opt-tracefile.mk @@ -1,8 +1,16 @@ -# $NetBSD: opt-tracefile.mk,v 1.2 2020/08/16 14:25:16 rillig Exp $ +# $NetBSD: opt-tracefile.mk,v 1.5 2021/12/06 22:35:20 rillig Exp $ # -# Tests for the -T command line option. +# Tests for the command line option '-T', which in jobs mode appends a trace +# record to a trace log whenever a job is started or completed. -# TODO: Implementation +all: .PHONY + @rm -f opt-tracefile.log + @${MAKE} -f ${MAKEFILE} -j1 -Topt-tracefile.log trace + # Remove timestamps, process IDs and directory paths. + @awk '{ print $$2, $$3 }' opt-tracefile.log + @rm opt-tracefile.log -all: - @:; +trace dependency1 dependency2: .PHONY + @echo 'Making ${.TARGET} from ${.ALLSRC:S,^$,,W}.' + +trace: dependency1 dependency2 diff --git a/contrib/bmake/unit-tests/suff-main-several.exp b/contrib/bmake/unit-tests/suff-main-several.exp index 09fa6d63bffa..b20f5ecf1143 100644 --- a/contrib/bmake/unit-tests/suff-main-several.exp +++ b/contrib/bmake/unit-tests/suff-main-several.exp @@ -1,141 +1,140 @@ ParseReadLine (8): '.1.2 .1.3 .1.4:' ParseDependency(.1.2 .1.3 .1.4:) Setting main node to ".1.2" ParseReadLine (9): ' : Making ${.TARGET} from ${.IMPSRC}.' ParseReadLine (14): 'next-main:' ParseDependency(next-main:) ParseReadLine (15): ' : Making ${.TARGET}' ParseReadLine (19): '.SUFFIXES: .1 .2 .3 .4' ParseDependency(.SUFFIXES: .1 .2 .3 .4) Adding suffix ".1" Adding suffix ".2" Setting main node from ".1.2" back to null defining transformation from `.1' to `.2' inserting ".1" (1) at end of list inserting ".2" (2) at end of list Setting main node to ".1.3" Adding suffix ".3" Setting main node from ".1.3" back to null defining transformation from `.1' to `.3' inserting ".1" (1) at end of list inserting ".3" (3) at end of list Setting main node to ".1.4" Adding suffix ".4" Setting main node from ".1.4" back to null defining transformation from `.1' to `.4' inserting ".1" (1) at end of list inserting ".4" (4) at end of list Setting main node to "next-main" ParseReadLine (24): '.SUFFIXES:' ParseDependency(.SUFFIXES:) Clearing all suffixes ParseReadLine (32): '.SUFFIXES: .4 .3 .2 .1' ParseDependency(.SUFFIXES: .4 .3 .2 .1) Adding suffix ".4" Adding suffix ".3" Adding suffix ".2" Adding suffix ".1" ParseReadLine (33): '.SUFFIXES:' ParseDependency(.SUFFIXES:) Clearing all suffixes ParseReadLine (34): '.SUFFIXES: .1 .2 .3 .4' ParseDependency(.SUFFIXES: .1 .2 .3 .4) Adding suffix ".1" Adding suffix ".2" Adding suffix ".3" Adding suffix ".4" ParseReadLine (35): '.SUFFIXES:' ParseDependency(.SUFFIXES:) Clearing all suffixes ParseReadLine (36): '.SUFFIXES: .4 .3 .2 .1' ParseDependency(.SUFFIXES: .4 .3 .2 .1) Adding suffix ".4" Adding suffix ".3" Adding suffix ".2" Adding suffix ".1" ParseReadLine (38): 'suff-main-several.1:' ParseDependency(suff-main-several.1:) ParseReadLine (39): ' : Making ${.TARGET} out of nothing.' ParseReadLine (40): 'next-main: suff-main-several.{2,3,4}' ParseDependency(next-main: suff-main-several.{2,3,4}) # LinkSource: added child next-main - suff-main-several.{2,3,4} # next-main, unmade, type OP_DEPENDS|OP_HAS_COMMANDS, flags none # suff-main-several.{2,3,4}, unmade, type none, flags none ParseReadLine (42): '.MAKEFLAGS: -d0 -dg1' ParseDependency(.MAKEFLAGS: -d0 -dg1) #*** Input graph: # .1.2, unmade, type OP_TRANSFORM, flags none # .1.3, unmade, type OP_TRANSFORM, flags none # .1.4, unmade, type OP_TRANSFORM, flags none # next-main, unmade, type OP_DEPENDS|OP_HAS_COMMANDS, flags none # suff-main-several.1, unmade, type OP_DEPENDS|OP_HAS_COMMANDS, flags none # suff-main-several.{2,3,4}, unmade, type none, flags none # # Files that are only sources: # .1.2 [.1.2] # .1.3 [.1.3] # .1.4 [.1.4] # suff-main-several.{2,3,4} [suff-main-several.{2,3,4}] #*** Global Variables: .ALLTARGETS = .1.2 .1.3 .1.4 next-main suff-main-several.1 suff-main-several.{2,3,4} .CURDIR = .INCLUDES = .LIBS = .MAKE =
.MAKE.DEPENDFILE =
.MAKE.GID =
.MAKE.LEVEL =
.MAKE.MAKEFILES =
.MAKE.MAKEFILE_PREFERENCE =
.MAKE.OS =
.MAKE.PID =
.MAKE.PPID =
.MAKE.UID =
.MAKEFLAGS = -r -k -d mps -d 0 -d g1 .MAKEOVERRIDES = .OBJDIR = .PATH = . .TARGETS = .newline = MACHINE =
MACHINE_ARCH =
MAKE =
MFLAGS = -r -k -d mps -d 0 -d g1 #*** Command-line Variables: .MAKE.LEVEL.ENV = MAKELEVEL #*** Directory Cache: # Stats: 0 hits 2 misses 0 near misses 0 losers (0%) # refs hits directory # 1 0 -# 1 0 . #*** Suffixes: # ".4" (num 1, ref 1) # To: # From: # Search Path: # ".3" (num 2, ref 1) # To: # From: # Search Path: # ".2" (num 3, ref 1) # To: # From: # Search Path: # ".1" (num 4, ref 1) # To: # From: # Search Path: #*** Transformations: make: don't know how to make suff-main-several.2 (continuing) make: don't know how to make suff-main-several.3 (continuing) make: don't know how to make suff-main-several.4 (continuing) `next-main' not remade because of errors. Stop. make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/suff-transform-debug.exp b/contrib/bmake/unit-tests/suff-transform-debug.exp index 0634ff616d0d..7fec51a1de9d 100644 --- a/contrib/bmake/unit-tests/suff-transform-debug.exp +++ b/contrib/bmake/unit-tests/suff-transform-debug.exp @@ -1,62 +1,61 @@ #*** Input graph: # all, unmade, type OP_DEPENDS, flags none # # Files that are only sources: #*** Global Variables: .ALLTARGETS = all .CURDIR = .INCLUDES = .LIBS = .MAKE =
.MAKE.DEPENDFILE =
.MAKE.GID =
.MAKE.LEVEL =
.MAKE.MAKEFILES =
.MAKE.MAKEFILE_PREFERENCE =
.MAKE.OS =
.MAKE.PID =
.MAKE.PPID =
.MAKE.UID =
.MAKEFLAGS = -r -k -d g1 .MAKEOVERRIDES = .OBJDIR = .PATH = . .TARGETS = .newline = MACHINE =
MACHINE_ARCH =
MAKE =
MFLAGS = -r -k -d g1 #*** Command-line Variables: .MAKE.LEVEL.ENV = MAKELEVEL #*** Directory Cache: # Stats: 0 hits 2 misses 0 near misses 0 losers (0%) # refs hits directory # 1 0 -# 1 0 . #*** Suffixes: # ".a" (num 1, ref 2) # To: # From: .cpp # Search Path: # ".c" (num 2, ref 2) # To: .cpp # From: # Search Path: # ".cpp" (num 3, ref 3) # To: .a # From: .c # Search Path: #*** Transformations: .c.cpp : : Making ${.TARGET} from impsrc ${.IMPSRC} allsrc ${.ALLSRC}. .cpp.a : : Making ${.TARGET} from impsrc ${.IMPSRC} allsrc ${.ALLSRC}. exit status 0 diff --git a/contrib/bmake/unit-tests/var-eval-short.exp b/contrib/bmake/unit-tests/var-eval-short.exp index ae0aff7d7c2c..c476c93125e3 100644 --- a/contrib/bmake/unit-tests/var-eval-short.exp +++ b/contrib/bmake/unit-tests/var-eval-short.exp @@ -1,29 +1,29 @@ -make: "var-eval-short.mk" line 41: In the :@ modifier of "", the variable name "${FAIL}" must not contain a dollar. +make: "var-eval-short.mk" line 41: In the :@ modifier of "", the variable name "${FAIL}" must not contain a dollar make: "var-eval-short.mk" line 41: Malformed conditional (0 && ${:Uword:@${FAIL}@expr@}) -make: "var-eval-short.mk" line 79: Invalid time value: ${FAIL}} -make: "var-eval-short.mk" line 79: Malformed conditional (0 && ${:Uword:gmtime=${FAIL}}) -make: "var-eval-short.mk" line 93: Invalid time value: ${FAIL}} -make: "var-eval-short.mk" line 93: Malformed conditional (0 && ${:Uword:localtime=${FAIL}}) +make: "var-eval-short.mk" line 81: Invalid time value at "${FAIL}}" +make: "var-eval-short.mk" line 81: Malformed conditional (0 && ${:Uword:gmtime=${FAIL}}) +make: "var-eval-short.mk" line 95: Invalid time value at "${FAIL}}" +make: "var-eval-short.mk" line 95: Malformed conditional (0 && ${:Uword:localtime=${FAIL}}) CondParser_Eval: 0 && ${0:?${FAIL}then:${FAIL}else} Var_Parse: ${0:?${FAIL}then:${FAIL}else} (parse-only) Parsing modifier ${0:?...} Modifier part: "${FAIL}then" Modifier part: "${FAIL}else" Result of ${0:?${FAIL}then:${FAIL}else} is "" (parse-only, defined) -ParseReadLine (158): 'DEFINED= defined' +ParseReadLine (160): 'DEFINED= defined' Global: DEFINED = defined CondParser_Eval: 0 && ${DEFINED:L:?${FAIL}then:${FAIL}else} Var_Parse: ${DEFINED:L:?${FAIL}then:${FAIL}else} (parse-only) Parsing modifier ${DEFINED:L} Result of ${DEFINED:L} is "defined" (parse-only, regular) Parsing modifier ${DEFINED:?...} Modifier part: "${FAIL}then" Modifier part: "${FAIL}else" Result of ${DEFINED:?${FAIL}then:${FAIL}else} is "defined" (parse-only, regular) -ParseReadLine (161): '.MAKEFLAGS: -d0' +ParseReadLine (163): '.MAKEFLAGS: -d0' ParseDependency(.MAKEFLAGS: -d0) Global: .MAKEFLAGS = -r -k -d cpv -d Global: .MAKEFLAGS = -r -k -d cpv -d 0 make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/var-eval-short.mk b/contrib/bmake/unit-tests/var-eval-short.mk index 41782f0d7823..1b9ccc714736 100644 --- a/contrib/bmake/unit-tests/var-eval-short.mk +++ b/contrib/bmake/unit-tests/var-eval-short.mk @@ -1,163 +1,165 @@ -# $NetBSD: var-eval-short.mk,v 1.5 2021/04/04 13:35:26 rillig Exp $ +# $NetBSD: var-eval-short.mk,v 1.7 2021/09/07 20:41:58 rillig Exp $ # # Tests for each variable modifier to ensure that they only do the minimum # necessary computations. If the result of the expression is not needed, they # should only parse the modifier but not actually evaluate it. # # See also: # var.c, the comment starting with 'The ApplyModifier functions' # ApplyModifier, for the order of the modifiers # ParseModifierPart, for evaluating nested expressions # cond-short.mk FAIL= ${:!echo unexpected 1>&2!} # The following tests only ensure that nested expressions are not evaluated. # They cannot ensure that any unexpanded text returned from ParseModifierPart # is ignored as well. To do that, it is necessary to step through the code of # each modifier. .if 0 && ${FAIL} .endif .if 0 && ${VAR::=${FAIL}} .elif defined(VAR) . error .endif .if 0 && ${${FAIL}:?then:else} .endif .if 0 && ${1:?${FAIL}:${FAIL}} .endif .if 0 && ${0:?${FAIL}:${FAIL}} .endif # Before var.c 1.870 from 2021-03-14, the expression ${FAIL} was evaluated # after the loop, when undefining the temporary global loop variable. # Since var.c 1.907 from 2021-04-04, a '$' is no longer allowed in the # variable name. .if 0 && ${:Uword:@${FAIL}@expr@} .endif .if 0 && ${:Uword:@var@${FAIL}@} .endif -# Before var.c,v 1.877 from 2021-03-14, the modifier ':[...]' did not expand +# Before var.c 1.877 from 2021-03-14, the modifier ':[...]' did not expand # the nested expression ${FAIL} and then tried to parse the unexpanded text, # which failed since '$' is not a valid range character. .if 0 && ${:Uword:[${FAIL}]} .endif -# Before var.c,v 1.867 from 2021-03-14, the modifier ':_' defined the variable +# Before var.c 1.867 from 2021-03-14, the modifier ':_' defined the variable # even though the whole expression should have only been parsed, not # evaluated. .if 0 && ${:Uword:_=VAR} .elif defined(VAR) . error .endif -# Before var.c,v 1.856 from 2021-03-14, the modifier ':C' did not expand the -# nested expression ${FAIL} and then tried to compile the unexpanded text as a -# regular expression, which failed both because of the '{FAIL}', which is not -# a valid repetition, and because of the '****', which are repeated -# repetitions as well. +# Before var.c 1.856 from 2021-03-14, the modifier ':C' did not expand the +# nested expression ${FAIL}, which is correct, and then tried to compile the +# unexpanded text as a regular expression, which is unnecessary since the +# right-hand side of the '&&' cannot influence the outcome of the condition. +# Compiling the regular expression then failed both because of the '{FAIL}', +# which is not a valid repetition of the form '{1,5}', and because of the +# '****', which are repeated repetitions as well. # '${FAIL}' .if 0 && ${:Uword:C,${FAIL}****,,} .endif DEFINED= # defined .if 0 && ${DEFINED:D${FAIL}} .endif .if 0 && ${:Uword:E} .endif # As of 2021-03-14, the error 'Invalid time value: ${FAIL}}' is ok since # ':gmtime' does not expand its argument. .if 0 && ${:Uword:gmtime=${FAIL}} .endif .if 0 && ${:Uword:H} .endif .if 0 && ${:Uword:hash} .endif .if 0 && ${value:L} .endif # As of 2021-03-14, the error 'Invalid time value: ${FAIL}}' is ok since # ':localtime' does not expand its argument. .if 0 && ${:Uword:localtime=${FAIL}} .endif .if 0 && ${:Uword:M${FAIL}} .endif .if 0 && ${:Uword:N${FAIL}} .endif .if 0 && ${:Uword:O} .endif .if 0 && ${:Uword:Ox} .endif .if 0 && ${:Uword:P} .endif .if 0 && ${:Uword:Q} .endif .if 0 && ${:Uword:q} .endif .if 0 && ${:Uword:R} .endif .if 0 && ${:Uword:range} .endif .if 0 && ${:Uword:S,${FAIL},${FAIL},} .endif .if 0 && ${:Uword:sh} .endif .if 0 && ${:Uword:T} .endif .if 0 && ${:Uword:ts/} .endif .if 0 && ${:U${FAIL}} .endif .if 0 && ${:Uword:u} .endif .if 0 && ${:Uword:word=replacement} .endif # Before var.c 1.875 from 2021-03-14, Var_Parse returned "${FAIL}else" for the # irrelevant right-hand side of the condition, even though this was not # necessary. Since the return value from Var_Parse is supposed to be ignored # anyway, and since it is actually ignored in an overly complicated way, # an empty string suffices. .MAKEFLAGS: -dcpv .if 0 && ${0:?${FAIL}then:${FAIL}else} .endif # The ':L' is applied before the ':?' modifier, giving the expression a name # and a value, just to see whether this value gets passed through or whether # the parse-only mode results in an empty string (only visible in the debug # log). As of var.c 1.875 from 2021-03-14, the value of the variable gets # through, even though an empty string would suffice. DEFINED= defined .if 0 && ${DEFINED:L:?${FAIL}then:${FAIL}else} .endif .MAKEFLAGS: -d0 all: diff --git a/contrib/bmake/unit-tests/var-op-expand.exp b/contrib/bmake/unit-tests/var-op-expand.exp index 39a9383953dd..a4ba53942cf7 100644 --- a/contrib/bmake/unit-tests/var-op-expand.exp +++ b/contrib/bmake/unit-tests/var-op-expand.exp @@ -1 +1,7 @@ -exit status 0 +make: "var-op-expand.mk" line 265: Unknown modifier "s,value,replaced," +make: "var-op-expand.mk" line 268: warning: XXX Neither branch should be taken. +make: "var-op-expand.mk" line 273: Unknown modifier "s,value,replaced," +make: "var-op-expand.mk" line 274: warning: XXX Neither branch should be taken. +make: Fatal errors encountered -- cannot continue +make: stopped in unit-tests +exit status 1 diff --git a/contrib/bmake/unit-tests/var-op-expand.mk b/contrib/bmake/unit-tests/var-op-expand.mk index ff62668a8ada..237f7baf1c62 100644 --- a/contrib/bmake/unit-tests/var-op-expand.mk +++ b/contrib/bmake/unit-tests/var-op-expand.mk @@ -1,178 +1,281 @@ -# $NetBSD: var-op-expand.mk,v 1.11 2021/01/01 23:07:48 sjg Exp $ +# $NetBSD: var-op-expand.mk,v 1.15 2021/11/30 23:52:19 rillig Exp $ # # Tests for the := variable assignment operator, which expands its # right-hand side. +# +# See also: +# varname-dot-make-save_dollars.mk +# Force the test results to be independent of the default value of this +# setting, which is 'yes' for NetBSD's usr.bin/make but 'no' for the bmake +# distribution and pkgsrc/devel/bmake. .MAKE.SAVE_DOLLARS:= yes # If the right-hand side does not contain a dollar sign, the ':=' assignment # operator has the same effect as the '=' assignment operator. VAR:= value .if ${VAR} != "value" . error .endif # When a ':=' assignment is performed, its right-hand side is evaluated and # expanded as far as possible. Contrary to other situations, '$$' and # variable expressions based on undefined variables are preserved though. # # Whether a variable expression is undefined or not is determined at the end # of evaluating the expression. The consequence is that ${:Ufallback} expands # to "fallback"; initially this expression is undefined since it is based on # the variable named "", which is guaranteed to be never defined, but at the # end of evaluating the expression ${:Ufallback}, the modifier ':U' has turned # the expression into a defined expression. # literal dollar signs VAR:= $$ $$$$ $$$$$$$$ .if ${VAR} != "\$ \$\$ \$\$\$\$" . error .endif # reference to a variable containing a literal dollar sign REF= $$ $$$$ $$$$$$$$ VAR:= ${REF} REF= too late .if ${VAR} != "\$ \$\$ \$\$\$\$" . error .endif # reference to an undefined variable .undef UNDEF VAR:= <${UNDEF}> UNDEF= after .if ${VAR} != "" . error .endif # reference to a variable whose name is computed from another variable REF2= referred to REF= REF2 VAR:= ${${REF}} REF= too late .if ${VAR} != "referred to" . error .endif # expression with an indirect modifier referring to an undefined variable .undef UNDEF VAR:= ${:${UNDEF}} UNDEF= Uwas undefined .if ${VAR} != "was undefined" . error .endif # expression with an indirect modifier referring to another variable that # in turn refers to an undefined variable # # XXX: Even though this is a ':=' assignment, the '${UNDEF}' in the part of # the variable modifier is not preserved. To preserve it, ParseModifierPart # would have to call VarSubstExpr somehow since this is the only piece of # code that takes care of this global variable. .undef UNDEF REF= U${UNDEF} #.MAKEFLAGS: -dv VAR:= ${:${REF}} #.MAKEFLAGS: -d0 REF= too late UNDEF= Uwas undefined .if ${VAR} != "" . error .endif # In variable assignments using the ':=' operator, undefined variables are # preserved, no matter how indirectly they are referenced. .undef REF3 REF2= <${REF3}> REF= ${REF2} VAR:= ${REF} REF3= too late .if ${VAR} != "" . error .endif # In variable assignments using the ':=' operator, '$$' are preserved, no # matter how indirectly they are referenced. REF2= REF2:$$ $$$$ REF= REF:$$ $$$$ ${REF2} VAR:= VAR:$$ $$$$ ${REF} .if ${VAR} != "VAR:\$ \$\$ REF:\$ \$\$ REF2:\$ \$\$" . error .endif # In variable assignments using the ':=' operator, '$$' are preserved in the # expressions of the top level, but not in expressions that are nested. VAR:= top:$$ ${:Unest1\:\$\$} ${:Unest2${:U\:\$\$}} .if ${VAR} != "top:\$ nest1:\$ nest2:\$" . error .endif # In variable assignments using the ':=' operator, there may be expressions # containing variable modifiers, and these modifiers may refer to other # variables. These referred-to variables are expanded at the time of # assignment. The undefined variables are kept as-is and are later expanded # when evaluating the condition. # # Contrary to the assignment operator '=', the assignment operator ':=' # consumes the '$' from modifier parts. REF.word= 1:$$ 2:$$$$ 4:$$$$$$$$ .undef REF.undef VAR:= ${:Uword undef:@word@${REF.${word}}@}, direct: ${REF.word} ${REF.undef} REF.word= word.after REF.undef= undef.after .if ${VAR} != "1:2:\$ 4:\$\$ undef.after, direct: 1:\$ 2:\$\$ 4:\$\$\$\$ undef.after" . error .endif # Just for comparison, the previous example using the assignment operator '=' # instead of ':='. The right-hand side of the assignment is not evaluated at # the time of assignment but only later, when ${VAR} appears in the condition. # # At that point, both REF.word and REF.undef are defined. REF.word= 1:$$ 2:$$$$ 4:$$$$$$$$ .undef REF.undef VAR= ${:Uword undef:@word@${REF.${word}}@}, direct: ${REF.word} ${REF.undef} REF.word= word.after REF.undef= undef.after .if ${VAR} != "word.after undef.after, direct: word.after undef.after" . error .endif # Between var.c 1.42 from 2000-05-11 and before parse.c 1.520 from 2020-12-27, # if the variable name in a ':=' assignment referred to an undefined variable, # there were actually 2 assignments to different variables: # # Global["VAR_SUBST_${UNDEF}"] = "" # Global["VAR_SUBST_"] = "" # # The variable name with the empty value actually included a dollar sign. # Variable names with dollars are not used in practice. # # It might be a good idea to forbid undefined variables on the left-hand side # of a variable assignment. .undef UNDEF VAR_ASSIGN_${UNDEF}= assigned by '=' VAR_SUBST_${UNDEF}:= assigned by ':=' .if ${VAR_ASSIGN_} != "assigned by '='" . error .endif .if defined(${:UVAR_SUBST_\${UNDEF\}}) . error .endif .if ${VAR_SUBST_} != "assigned by ':='" . error .endif + +# The following test case demonstrates that the variable 'LATER' is preserved +# in the ':=' assignment since the variable 'LATER' is not yet defined. +# After the assignment to 'LATER', evaluating the variable 'INDIRECT' +# evaluates 'LATER' as well. +# +.undef LATER +INDIRECT:= ${LATER:S,value,replaced,} +.if ${INDIRECT} != "" +. error +.endif +LATER= late-value +.if ${INDIRECT} != "late-replaced" +. error +.endif + + +# Same as the test case above, except for the additional modifier ':tl' when +# evaluating the variable 'INDIRECT'. Nothing surprising here. +.undef LATER +.undef later +INDIRECT:= ${LATER:S,value,replaced,} +.if ${INDIRECT:tl} != "" +. error +.endif +LATER= uppercase-value +later= lowercase-value +.if ${INDIRECT:tl} != "uppercase-replaced" +. error +.endif + + +# Similar to the two test cases above, the situation gets a bit more involved +# here, due to the double indirection. The variable 'indirect' is supposed to +# be the lowercase version of the variable 'INDIRECT'. +# +# The assignment operator ':=' for the variable 'INDIRECT' could be a '=' as +# well, it wouldn't make a difference in this case. The crucial detail is the +# assignment operator ':=' for the variable 'indirect'. During this +# assignment, the variable modifier ':S,value,replaced,' is converted to +# lowercase, which turns 'S' into 's', thus producing an unknown modifier. +# In this case, make issues a warning, but in cases where the modifier +# includes a '=', the modifier would be interpreted as a SysV-style +# substitution like '.c=.o', and make would not issue a warning, leading to +# silent unexpected behavior. +# +# As of 2021-11-20, the actual behavior is unexpected. Fixing it is not +# trivial. When the assignment to 'indirect' takes place, the expressions +# from the nested expression could be preserved, like this: +# +# Start with: +# +# indirect:= ${INDIRECT:tl} +# +# Since INDIRECT is defined, expand it, remembering that the modifier +# ':tl' must still be applied to the final result. +# +# indirect:= ${LATER:S,value,replaced,} \ +# OK \ +# ${LATER:value=sysv} +# +# The variable 'LATER' is not defined. An idea may be to append the +# remaining modifier ':tl' to each expression that is starting with an +# undefined variable, resulting in: +# +# indirect:= ${LATER:S,value,replaced,:tl} \ +# OK \ +# ${LATER:value=sysv:tl} +# +# This would work for the first expression. The second expression ends +# with the SysV modifier ':from=to', and when this modifier is parsed, +# it consumes all characters until the end of the expression, which in +# this case would replace the suffix 'value' with the literal 'sysv:tl', +# ignoring that the ':tl' was intended to be an additional modifier. +# +# Due to all of this, this surprising behavior is not easy to fix. +# +.undef LATER +.undef later +INDIRECT:= ${LATER:S,value,replaced,} OK ${LATER:value=sysv} +indirect:= ${INDIRECT:tl} +# expect+1: Unknown modifier "s,value,replaced," +.if ${indirect} != " ok " +. error +.else +. warning XXX Neither branch should be taken. +.endif +LATER= uppercase-value +later= lowercase-value +# expect+1: Unknown modifier "s,value,replaced," +.if ${indirect} != "uppercase-replaced ok uppercase-sysv" +. warning XXX Neither branch should be taken. +.else +. error +.endif + + all: @:; diff --git a/contrib/bmake/unit-tests/vardebug.exp b/contrib/bmake/unit-tests/vardebug.exp index 6d00acc977af..3519bbd0ba1b 100644 --- a/contrib/bmake/unit-tests/vardebug.exp +++ b/contrib/bmake/unit-tests/vardebug.exp @@ -1,69 +1,69 @@ Global:delete FROM_CMDLINE (not found) Command: FROM_CMDLINE = Global: .MAKEOVERRIDES = FROM_CMDLINE Global: VAR = added Global: VAR = overwritten Global:delete VAR Global:delete VAR (not found) Var_SetExpand: variable name "${:U}" expands to empty string, with value "empty name" - ignored Var_AppendExpand: variable name "${:U}" expands to empty string, with value "empty name" - ignored Global: FROM_CMDLINE = overwritten ignored! Global: VAR = 1 Global: VAR = 1 2 Global: VAR = 1 2 3 Var_Parse: ${VAR:M[2]} (eval-defined) Evaluating modifier ${VAR:M...} on value "1 2 3" Pattern for ':M' is "[2]" ModifyWords: split "1 2 3" into 3 words Result of ${VAR:M[2]} is "2" Var_Parse: ${VAR:N[2]} (eval-defined) Evaluating modifier ${VAR:N...} on value "1 2 3" Pattern for ':N' is "[2]" ModifyWords: split "1 2 3" into 3 words Result of ${VAR:N[2]} is "1 3" Var_Parse: ${VAR:S,2,two,} (eval-defined) Evaluating modifier ${VAR:S...} on value "1 2 3" Modifier part: "2" Modifier part: "two" ModifyWords: split "1 2 3" into 3 words Result of ${VAR:S,2,two,} is "1 two 3" Var_Parse: ${VAR:Q} (eval-defined) Evaluating modifier ${VAR:Q} on value "1 2 3" Result of ${VAR:Q} is "1\ 2\ 3" Var_Parse: ${VAR:tu:tl:Q} (eval-defined) Evaluating modifier ${VAR:t...} on value "1 2 3" Result of ${VAR:tu} is "1 2 3" Evaluating modifier ${VAR:t...} on value "1 2 3" Result of ${VAR:tl} is "1 2 3" Evaluating modifier ${VAR:Q} on value "1 2 3" Result of ${VAR:Q} is "1\ 2\ 3" Var_Parse: ${:Uvalue:${:UM*e}:Mvalu[e]} (eval-defined) Evaluating modifier ${:U...} on value "" (eval-defined, undefined) Result of ${:Uvalue} is "value" (eval-defined, defined) Indirect modifier "M*e" from "${:UM*e}" Evaluating modifier ${:M...} on value "value" (eval-defined, defined) Pattern for ':M' is "*e" -ModifyWords: split "value" into 1 words +ModifyWords: split "value" into 1 word Result of ${:M*e} is "value" (eval-defined, defined) Evaluating modifier ${:M...} on value "value" (eval-defined, defined) Pattern for ':M' is "valu[e]" -ModifyWords: split "value" into 1 words +ModifyWords: split "value" into 1 word Result of ${:Mvalu[e]} is "value" (eval-defined, defined) Global:delete VAR Var_Parse: ${:Uvariable:unknown} (eval-defined) Evaluating modifier ${:U...} on value "" (eval-defined, undefined) Result of ${:Uvariable} is "variable" (eval-defined, defined) Evaluating modifier ${:u...} on value "variable" (eval-defined, defined) make: "vardebug.mk" line 44: Unknown modifier "unknown" Result of ${:unknown} is error (eval-defined, defined) make: "vardebug.mk" line 44: Malformed conditional (${:Uvariable:unknown}) Var_Parse: ${UNDEFINED} (eval-defined) make: "vardebug.mk" line 53: Malformed conditional (${UNDEFINED}) Global:delete .SHELL (not found) Command: .SHELL = Command: .SHELL = overwritten ignored (read-only) Global: .MAKEFLAGS = -r -k -d v -d Global: .MAKEFLAGS = -r -k -d v -d 0 make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmisc.mk b/contrib/bmake/unit-tests/varmisc.mk index e5ab375d8f39..81818f3fb8bb 100644 --- a/contrib/bmake/unit-tests/varmisc.mk +++ b/contrib/bmake/unit-tests/varmisc.mk @@ -1,218 +1,222 @@ -# $Id: varmisc.mk,v 1.23 2021/02/05 20:02:30 sjg Exp $ -# $NetBSD: varmisc.mk,v 1.30 2021/02/04 21:42:47 rillig Exp $ +# $Id: varmisc.mk,v 1.25 2021/12/07 00:03:11 sjg Exp $ +# $NetBSD: varmisc.mk,v 1.32 2021/12/05 10:02:51 rillig Exp $ # # Miscellaneous variable tests. all: unmatched_var_paren D_true U_true D_false U_false Q_lhs Q_rhs NQ_none \ strftime cmpv manok all: save-dollars all: export-appended all: parse-dynamic all: varerror-unclosed unmatched_var_paren: @echo ${foo::=foo-text} True= ${echo true >&2:L:sh}TRUE False= ${echo false >&2:L:sh}FALSE VSET= is set .undef UNDEF U_false: @echo :U skipped when var set @echo ${VSET:U${False}} D_false: @echo :D skipped if var undef @echo ${UNDEF:D${False}} U_true: @echo :U expanded when var undef @echo ${UNDEF:U${True}} D_true: @echo :D expanded when var set @echo ${VSET:D${True}} Q_lhs: @echo :? only lhs when value true @echo ${1:L:?${True}:${False}} Q_rhs: @echo :? only rhs when value false @echo ${0:L:?${True}:${False}} NQ_none: @echo do not evaluate or expand :? if discarding @echo ${VSET:U${1:L:?${True}:${False}}} April1= 1459494000 # slightly contorted syntax to use utc via variable strftime: @echo ${year=%Y month=%m day=%d:L:gmtime=1459494000} @echo date=${%Y%m%d:L:${gmtime=${April1}:L}} # big jumps to handle 3 digits per step M_cmpv.units= 1 1000 1000000 M_cmpv= S,., ,g:_:range:@i@+ $${_:[-$$i]} \* $${M_cmpv.units:[$$i]}@:S,^,expr 0 ,1:sh Version= 123.456.789 cmpv.only= target specific vars cmpv: @echo Version=${Version} == ${Version:${M_cmpv}} @echo Literal=3.4.5 == ${3.4.5:L:${M_cmpv}} @echo We have ${${.TARGET:T}.only} -# catch misshandling of nested vars in .for loop +# catch mishandling of nested variables in .for loop MAN= MAN1= make.1 .for s in 1 2 . if defined(MAN$s) && !empty(MAN$s) MAN+= ${MAN$s} . endif .endfor manok: @echo MAN=${MAN} +# Test parsing of boolean values. # begin .MAKE.SAVE_DOLLARS; see Var_SetWithFlags and ParseBoolean. SD_VALUES= 0 1 2 False True false true Yes No yes no On Off ON OFF on off SD_4_DOLLARS= $$$$ .for val in ${SD_VALUES} -.MAKE.SAVE_DOLLARS:= ${val} # Must be := since a simple = has no effect. +# The assignment must be done using ':=' since a simple '=' would be +# interpreted as 'yes', due to the leading '$'; see ParseBoolean. +.MAKE.SAVE_DOLLARS:= ${val} SD.${val}:= ${SD_4_DOLLARS} .endfor .MAKE.SAVE_DOLLARS:= yes save-dollars: .for val in ${SD_VALUES} @printf '%s: %-8s = %s\n' $@ ${val} ${SD.${val}:Q} .endfor +# end .MAKE.SAVE_DOLLARS # Appending to an undefined variable does not add a space in front. .undef APPENDED APPENDED+= value .if ${APPENDED} != "value" . error "${APPENDED}" .endif # Appending to an empty variable adds a space between the old value # and the additional value. APPENDED= # empty APPENDED+= value .if ${APPENDED} != " value" . error "${APPENDED}" .endif # Appending to parameterized variables works as well. PARAM= param VAR.${PARAM}= 1 VAR.${PARAM}+= 2 .if ${VAR.param} != "1 2" . error "${VAR.param}" .endif # The variable name can contain arbitrary characters. # If the expanded variable name ends in a +, this still does not influence # the parser. The assignment operator is still a simple assignment. # Therefore, there is no need to add a space between the variable name # and the assignment operator. PARAM= + VAR.${PARAM}= 1 VAR.${PARAM}+= 2 .if ${VAR.+} != "1 2" . error "${VAR.+}" .endif .for param in + ! ? VAR.${param}= ${param} .endfor .if ${VAR.+} != "+" || ${VAR.!} != "!" || ${VAR.?} != "?" . error "${VAR.+}" "${VAR.!}" "${VAR.?}" .endif # Appending to a variable from the environment creates a copy of that variable # in the global scope. # The appended value is not exported automatically. # When a variable is exported, the exported value is taken at the time of the # .export directive. Later changes to the variable have no effect. .export FROM_ENV_BEFORE FROM_ENV+= mk FROM_ENV_BEFORE+= mk FROM_ENV_AFTER+= mk .export FROM_ENV_AFTER export-appended: @echo $@: "$$FROM_ENV" @echo $@: "$$FROM_ENV_BEFORE" @echo $@: "$$FROM_ENV_AFTER" # begin parse-dynamic # # Demonstrate that the target-specific variables are not evaluated in # the global scope. Their expressions are preserved until there is a local # scope in which resolving them makes sense. # There are different code paths for short names ... ${:U>}= before GS_TARGET:= $@ GS_MEMBER:= $% GS_PREFIX:= $* GS_ARCHIVE:= $! GS_ALLSRC:= $> ${:U>}= after # ... and for braced short names ... GB_TARGET:= ${@} GB_MEMBER:= ${%} GB_PREFIX:= ${*} GB_ARCHIVE:= ${!} GB_ALLSRC:= ${>} # ... and for long names. GL_TARGET:= ${.TARGET} GL_MEMBER:= ${.MEMBER} GL_PREFIX:= ${.PREFIX} GL_ARCHIVE:= ${.ARCHIVE} GL_ALLSRC:= ${.ALLSRC} parse-dynamic: @echo $@: ${GS_TARGET} ${GS_MEMBER} ${GS_PREFIX} ${GS_ARCHIVE} ${GS_ALLSRC} @echo $@: ${GB_TARGET} ${GB_MEMBER} ${GB_PREFIX} ${GB_ARCHIVE} ${GB_ALLSRC} @echo $@: ${GL_TARGET} ${GL_MEMBER} ${GL_PREFIX} ${GL_ARCHIVE} ${GL_ALLSRC} # Since 2020-07-28, make complains about unclosed variables. # Before that, it had complained about unclosed variables only when # parsing the modifiers, but not when parsing the variable name. UNCLOSED_INDIR_1= ${UNCLOSED_ORIG UNCLOSED_INDIR_2= ${UNCLOSED_INDIR_1} FLAGS= one two FLAGS+= ${FLAGS.${.ALLSRC:M*.c:T:u}} FLAGS.target2.c= three four target1.c: target2.c: all: target1-flags target2-flags target1-flags: target1.c @echo $@: we have: ${FLAGS} target2-flags: target2.c @echo $@: we have: ${FLAGS} varerror-unclosed: @echo $@:begin @echo $( @echo $(UNCLOSED @echo ${UNCLOSED @echo ${UNCLOSED:M${PATTERN @echo ${UNCLOSED.${param @echo $ .for i in 1 2 3 @echo ${UNCLOSED.${i} .endfor @echo ${UNCLOSED_INDIR_2} @echo $@:end diff --git a/contrib/bmake/unit-tests/varmod-assign.exp b/contrib/bmake/unit-tests/varmod-assign.exp index 1e43714d500b..1ad388418ab5 100644 --- a/contrib/bmake/unit-tests/varmod-assign.exp +++ b/contrib/bmake/unit-tests/varmod-assign.exp @@ -1,40 +1,28 @@ Global: param = twice Global: VARNAME = VAR.$${param} Var_Parse: ${VARNAME} (eval) Global: VAR.${param} = initial-value Var_Parse: ${${VARNAME}::=assigned-value} (eval-defined) Var_Parse: ${VARNAME}::=assigned-value} (eval-defined) Evaluating modifier ${VAR.${param}::...} on value "initial-value" Modifier part: "assigned-value" Global: VAR.${param} = assigned-value Result of ${VAR.${param}::=assigned-value} is "" Var_Parse: ${${VARNAME}} != "assigned-value" (eval-defined) Var_Parse: ${VARNAME}} != "assigned-value" (eval-defined) Global: .MAKEFLAGS = -r -k -d v -d Global: .MAKEFLAGS = -r -k -d v -d 0 -mod-assign: first=1. -mod-assign: last=3. -mod-assign: appended=1 2 3. -1 -2 -3 -mod-assign: ran:3. -mod-assign: global: 1, 3, 1 2 3, 3. -mod-assign-nested: then1t1 -mod-assign-nested: else2e2 -mod-assign-nested: then3t3 -mod-assign-nested: else4e4 make: Bad modifier ":" for variable "" mod-assign-empty: value} make: Bad modifier ":" for variable "" mod-assign-empty: overwritten} mod-assign-empty: VAR=overwritten make: Unknown modifier ":x" sysv:y make: Unfinished modifier for "ASSIGN" ('}' missing) ok=word make: " echo word; false " returned non-zero status err=previous exit status 0 diff --git a/contrib/bmake/unit-tests/varmod-assign.mk b/contrib/bmake/unit-tests/varmod-assign.mk index f50c654f5bcf..b8559025fbfd 100644 --- a/contrib/bmake/unit-tests/varmod-assign.mk +++ b/contrib/bmake/unit-tests/varmod-assign.mk @@ -1,141 +1,150 @@ -# $NetBSD: varmod-assign.mk,v 1.12 2021/03/15 18:56:38 rillig Exp $ +# $NetBSD: varmod-assign.mk,v 1.14 2021/12/05 10:13:44 rillig Exp $ # # Tests for the obscure ::= variable modifiers, which perform variable # assignments during evaluation, just like the = operator in C. -all: mod-assign -all: mod-assign-nested all: mod-assign-empty all: mod-assign-parse all: mod-assign-shell-error -mod-assign: - # The ::?= modifier applies the ?= assignment operator 3 times. - # The ?= operator only has an effect for the first time, therefore - # the variable FIRST ends up with the value 1. - @echo $@: ${1 2 3:L:@i@${FIRST::?=$i}@} first=${FIRST}. - - # The ::= modifier applies the = assignment operator 3 times. - # The = operator overwrites the previous value, therefore the - # variable LAST ends up with the value 3. - @echo $@: ${1 2 3:L:@i@${LAST::=$i}@} last=${LAST}. - - # The ::+= modifier applies the += assignment operator 3 times. - # The += operator appends 3 times to the variable, therefore - # the variable APPENDED ends up with the value "1 2 3". - @echo $@: ${1 2 3:L:@i@${APPENDED::+=$i}@} appended=${APPENDED}. - - # The ::!= modifier applies the != assignment operator 3 times. - # The side effects of the shell commands are visible in the output. - # Just as with the ::= modifier, the last value is stored in the - # RAN variable. - @echo $@: ${echo.1 echo.2 echo.3:L:@i@${RAN::!=${i:C,.*,&; & 1>\&2,:S,., ,g}}@} ran:${RAN}. - - # The assignments happen in the global scope and thus are - # preserved even after the shell command has been run. - @echo $@: global: ${FIRST:Q}, ${LAST:Q}, ${APPENDED:Q}, ${RAN:Q}. - -mod-assign-nested: - # The condition "1" is true, therefore THEN1 gets assigned a value, - # and IT1 as well. Nothing surprising here. - @echo $@: ${1:?${THEN1::=then1${IT1::=t1}}:${ELSE1::=else1${IE1::=e1}}}${THEN1}${ELSE1}${IT1}${IE1} - - # The condition "0" is false, therefore ELSE1 gets assigned a value, - # and IE1 as well. Nothing surprising here as well. - @echo $@: ${0:?${THEN2::=then2${IT2::=t2}}:${ELSE2::=else2${IE2::=e2}}}${THEN2}${ELSE2}${IT2}${IE2} - - # The same effects happen when the variables are defined elsewhere. - @echo $@: ${SINK3:Q} - @echo $@: ${SINK4:Q} -SINK3:= ${1:?${THEN3::=then3${IT3::=t3}}:${ELSE3::=else3${IE3::=e3}}}${THEN3}${ELSE3}${IT3}${IE3} -SINK4:= ${0:?${THEN4::=then4${IT4::=t4}}:${ELSE4::=else4${IE4::=e4}}}${THEN4}${ELSE4}${IT4}${IE4} +# The modifier '::?=' applies the assignment operator '?=' 3 times. The +# operator '?=' only has an effect for the first time, therefore the variable +# FIRST ends up with the value 1. +.if "${1 2 3:L:@i@${FIRST::?=$i}@} first=${FIRST}" != " first=1" +. error +.endif + +# The modifier '::=' applies the assignment operator '=' 3 times. The +# operator '=' overwrites the previous value, therefore the variable LAST ends +# up with the value 3. +.if "${1 2 3:L:@i@${LAST::=$i}@} last=${LAST}" != " last=3" +. error +.endif + +# The modifier '::+=' applies the assignment operator '+=' 3 times. The +# operator '+=' appends 3 times to the variable, therefore the variable +# APPENDED ends up with the value "1 2 3". +.if "${1 2 3:L:@i@${APPENDED::+=$i}@} appended=${APPENDED}" != " appended=1 2 3" +. error +.endif + +# The modifier '::!=' applies the assignment operator '!=' 3 times. Just as +# with the modifier '::=', the last value is stored in the RAN variable. +.if "${1 2 3:L:@i@${RAN::!=${i:%=echo '<%>';}}@} ran=${RAN}" != " ran=<3>" +. error +.endif + +# The assignments happen in the global scope and thus are preserved even after +# the shell command has been run and the condition has been evaluated. +.if "${FIRST}, ${LAST}, ${APPENDED}, ${RAN}" != "1, 3, 1 2 3, <3>" +. error +.endif + +# Tests for nested assignments, which are hard to read and therefore seldom +# used in practice. + +# The condition "1" is true, therefore THEN1 gets assigned a value, +# and the inner IT1 as well. Nothing surprising here. +.if "${1:?${THEN1::=then1${IT1::=t1}}:${ELSE1::=else1${IE1::=e1}}} ${THEN1}${ELSE1}${IT1}${IE1}" != " then1t1" +. error +.endif + +# The condition "0" is false, therefore ELSE2 gets assigned a value, +# and the inner IE2 as well. Nothing surprising here as well. +.if "${0:?${THEN2::=then2${IT2::=t2}}:${ELSE2::=else2${IE2::=e2}}} ${THEN2}${ELSE2}${IT2}${IE2}" != " else2e2" +. error +.endif + +# The same effects happen when the variables are defined elsewhere. +SINK3:= ${1:?${THEN3::=then3${IT3::=t3}}:${ELSE3::=else3${IE3::=e3}}} ${THEN3}${ELSE3}${IT3}${IE3} +SINK4:= ${0:?${THEN4::=then4${IT4::=t4}}:${ELSE4::=else4${IE4::=e4}}} ${THEN4}${ELSE4}${IT4}${IE4} +.if ${SINK3} != " then3t3" +. error +.endif +.if ${SINK4} != " else4e4" +. error +.endif mod-assign-empty: # Assigning to the empty variable would obviously not work since that # variable is write-protected. Therefore it is rejected early with a # "Bad modifier" message. - # - # XXX: The error message is hard to read since the variable name is - # empty. This leads to a trailing space in the error message. @echo $@: ${::=value} # In this variant, it is not as obvious that the name of the # expression is empty. Assigning to it is rejected as well, with the # same "Bad modifier" message. - # - # XXX: The error message is hard to read since the variable name is - # empty. This leads to a trailing space in the error message. @echo $@: ${:Uvalue::=overwritten} # The :L modifier sets the value of the expression to its variable # name. The name of the expression is "VAR", therefore assigning to # that variable works. @echo $@: ${VAR:L::=overwritten} VAR=${VAR} mod-assign-parse: # The modifier for assignment operators starts with a ':'. # An 'x' after that is an invalid modifier. @echo ${ASSIGN::x} # 'x' is an unknown assignment operator # When parsing an assignment operator fails because the operator is # incomplete, make falls back to the SysV modifier. @echo ${SYSV::=sysv\:x}${SYSV::x=:y} @echo ${ASSIGN::=value # missing closing brace mod-assign-shell-error: # If the command succeeds, the variable is assigned. @${SH_OK::!= echo word; true } echo ok=${SH_OK} # If the command fails, the variable keeps its previous value. @${SH_ERR::=previous} @${SH_ERR::!= echo word; false } echo err=${SH_ERR} # XXX: The ::= modifier expands its right-hand side exactly once. # This differs subtly from normal assignments such as '+=' or '=', which copy # their right-hand side literally. APPEND.prev= previous APPEND.var= ${APPEND.prev} APPEND.indirect= indirect $${:Unot expanded} APPEND.dollar= $${APPEND.indirect} .if ${APPEND.var::+=${APPEND.dollar}} != "" . error .endif .if ${APPEND.var} != "previous indirect \${:Unot expanded}" . error .endif # The assignment modifier can be used in a variable expression that is # enclosed in parentheses. In such a case, parsing stops at the first ')', # not at the first '}'. VAR= previous _:= $(VAR::=current}) .if ${VAR} != "current}" . error .endif # Before var.c 1.888 from 2021-03-15, an expression using the modifier '::=' # expanded its variable name once too often during evaluation. This was only # relevant for variable names containing a '$' sign in their actual name, not # the usual VAR.${param}. .MAKEFLAGS: -dv param= twice VARNAME= VAR.$${param} # Indirect variable name because of the '$', # to avoid difficult escaping rules. ${VARNAME}= initial-value # Sets 'VAR.${param}' to 'expanded'. .if defined(VAR.twice) # At this point, the '$$' is not expanded. . error .endif .if ${${VARNAME}::=assigned-value} # Here the variable name gets expanded once . error # too often. .endif .if defined(VAR.twice) . error The variable name in the '::=' modifier is expanded once too often. .endif .if ${${VARNAME}} != "assigned-value" . error .endif .MAKEFLAGS: -d0 diff --git a/contrib/bmake/unit-tests/varmod-defined.exp b/contrib/bmake/unit-tests/varmod-defined.exp index 2f7d4dbf4baa..e2ae8d29808c 100644 --- a/contrib/bmake/unit-tests/varmod-defined.exp +++ b/contrib/bmake/unit-tests/varmod-defined.exp @@ -1,23 +1,23 @@ Global: 8_DOLLARS = $$$$$$$$ Global: VAR = Var_Parse: ${8_DOLLARS} (eval-keep-dollar-and-undefined) Global: VAR = $$$$$$$$ Var_Parse: ${VAR:D${8_DOLLARS}} (eval-keep-dollar-and-undefined) Evaluating modifier ${VAR:D...} on value "$$$$$$$$" (eval-keep-dollar-and-undefined, regular) Var_Parse: ${8_DOLLARS}} (eval-keep-dollar-and-undefined) Result of ${VAR:D${8_DOLLARS}} is "$$$$$$$$" (eval-keep-dollar-and-undefined, regular) Global: VAR = $$$$$$$$ Var_Parse: ${VAR:@var@${8_DOLLARS}@} (eval-keep-dollar-and-undefined) Evaluating modifier ${VAR:@...} on value "$$$$$$$$" (eval-keep-dollar-and-undefined, regular) Modifier part: "var" Modifier part: "${8_DOLLARS}" -ModifyWords: split "$$$$$$$$" into 1 words +ModifyWords: split "$$$$$$$$" into 1 word Global: var = $$$$$$$$ Var_Parse: ${8_DOLLARS} (eval-keep-undefined) ModifyWord_Loop: in "$$$$$$$$", replace "var" with "${8_DOLLARS}" to "$$$$" Global:delete var Result of ${VAR:@var@${8_DOLLARS}@} is "$$$$" (eval-keep-dollar-and-undefined, regular) Global: VAR = $$$$ Global: .MAKEFLAGS = -r -k -d v -d Global: .MAKEFLAGS = -r -k -d v -d 0 exit status 0 diff --git a/contrib/bmake/unit-tests/varmod-defined.mk b/contrib/bmake/unit-tests/varmod-defined.mk index a44b9f993146..ab5d708cf73f 100644 --- a/contrib/bmake/unit-tests/varmod-defined.mk +++ b/contrib/bmake/unit-tests/varmod-defined.mk @@ -1,105 +1,108 @@ -# $NetBSD: varmod-defined.mk,v 1.11 2021/04/11 13:35:56 rillig Exp $ +# $NetBSD: varmod-defined.mk,v 1.12 2021/11/30 23:52:19 rillig Exp $ # # Tests for the :D variable modifier, which returns the given string # if the variable is defined. It is closely related to the :U modifier. +# Force the test results to be independent of the default value of this +# setting, which is 'yes' for NetBSD's usr.bin/make but 'no' for the bmake +# distribution and pkgsrc/devel/bmake. .MAKE.SAVE_DOLLARS= yes DEF= defined .undef UNDEF # Since DEF is defined, the value of the expression is "value", not # "defined". # .if ${DEF:Dvalue} != "value" . error .endif # Since UNDEF is not defined, the "value" is ignored. Instead of leaving the # expression undefined, it is set to "", exactly to allow the expression to # be used in .if conditions. In this place, other undefined expressions # would generate an error message. # XXX: Ideally the error message would be "undefined variable", but as of # 2020-08-25 it is "Malformed conditional". # .if ${UNDEF:Dvalue} != "" . error .endif # The modifier text may contain plain text as well as expressions. # .if ${DEF:D<${DEF}>} != "" . error .endif # Special characters that would be interpreted differently can be escaped. # These are '}' (the closing character of the expression), ':', '$' and '\'. # Any other backslash sequences are preserved. # # The escaping rules for string literals in conditions are completely # different though. There, any character may be escaped using a backslash. # .if ${DEF:D \} \: \$ \\ \) \n } != " } : \$ \\ \\) \\n " . error .endif # Like in several other places in variable expressions, when # ApplyModifier_Defined calls Var_Parse, double dollars lead to a parse # error that is silently ignored. This makes all dollar signs disappear, # except for the last, which is a well-formed variable expression. # .if ${DEF:D$$$$$${DEF}} != "defined" . error .endif # Any other text is written without any further escaping. In contrast # to the :M modifier, parentheses and braces do not need to be nested. # Instead, the :D modifier is implemented sanely by parsing nested # expressions as such, without trying any shortcuts. See ApplyModifier_Match # for an inferior variant. # .if ${DEF:D!&((((} != "!&((((" . error .endif # The :D modifier is often used in combination with the :U modifier. # It does not matter in which order the :D and :U modifiers appear. .if ${UNDEF:Dyes:Uno} != no . error .endif .if ${UNDEF:Uno:Dyes} != no . error .endif .if ${DEF:Dyes:Uno} != yes . error .endif .if ${DEF:Uno:Dyes} != yes . error .endif # Since the variable with the empty name is never defined, the :D modifier # can be used to add comments in the middle of an expression. That # expression always evaluates to an empty string. .if ${:D This is a comment. } != "" . error .endif # TODO: Add more tests for parsing the plain text part, to cover each branch # of ApplyModifier_Defined. # The :D and :U modifiers behave differently from the :@var@ modifier in # that they preserve dollars in a ':=' assignment. This is because # ApplyModifier_Defined passes the emode unmodified to Var_Parse, unlike # ApplyModifier_Loop, which uses ParseModifierPart, which in turn removes # the keepDollar flag from emode. # # XXX: This inconsistency is documented nowhere. .MAKEFLAGS: -dv 8_DOLLARS= $$$$$$$$ VAR:= ${8_DOLLARS} VAR:= ${VAR:D${8_DOLLARS}} VAR:= ${VAR:@var@${8_DOLLARS}@} .MAKEFLAGS: -d0 all: @:; diff --git a/contrib/bmake/unit-tests/varmod-gmtime.exp b/contrib/bmake/unit-tests/varmod-gmtime.exp index 5d5806b92d26..fdc9a2170e2f 100644 --- a/contrib/bmake/unit-tests/varmod-gmtime.exp +++ b/contrib/bmake/unit-tests/varmod-gmtime.exp @@ -1,13 +1,13 @@ -make: "varmod-gmtime.mk" line 57: Invalid time value: ${:U1593536400}} != "mtime=11593536400}" +make: "varmod-gmtime.mk" line 57: Invalid time value at "${:U1593536400}} != "mtime=11593536400}"" make: "varmod-gmtime.mk" line 57: Malformed conditional (${%Y:L:gmtime=${:U1593536400}} != "mtime=11593536400}") -make: "varmod-gmtime.mk" line 67: Invalid time value: -1} != "" +make: "varmod-gmtime.mk" line 67: Invalid time value at "-1} != """ make: "varmod-gmtime.mk" line 67: Malformed conditional (${:L:gmtime=-1} != "") -make: "varmod-gmtime.mk" line 76: Invalid time value: 1} != "" +make: "varmod-gmtime.mk" line 76: Invalid time value at " 1} != """ make: "varmod-gmtime.mk" line 76: Malformed conditional (${:L:gmtime= 1} != "") -make: "varmod-gmtime.mk" line 119: Invalid time value: 10000000000000000000000000000000} != "" +make: "varmod-gmtime.mk" line 119: Invalid time value at "10000000000000000000000000000000} != """ make: "varmod-gmtime.mk" line 119: Malformed conditional (${:L:gmtime=10000000000000000000000000000000} != "") -make: "varmod-gmtime.mk" line 130: Invalid time value: error} != "" +make: "varmod-gmtime.mk" line 130: Invalid time value at "error} != """ make: "varmod-gmtime.mk" line 130: Malformed conditional (${:L:gmtime=error} != "") make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-indirect.exp b/contrib/bmake/unit-tests/varmod-indirect.exp index 63ed988d0c0e..9cff88eb760a 100644 --- a/contrib/bmake/unit-tests/varmod-indirect.exp +++ b/contrib/bmake/unit-tests/varmod-indirect.exp @@ -1,43 +1,43 @@ make: "varmod-indirect.mk" line 19: Unknown modifier "${" make: "varmod-indirect.mk" line 52: Unknown modifier "${" make: "varmod-indirect.mk" line 55: warning: FIXME: this expression should have resulted in a parse error rather than returning the unparsed portion of the expression. make: "varmod-indirect.mk" line 140: before make: "varmod-indirect.mk" line 140: after make: "varmod-indirect.mk" line 146: before make: "varmod-indirect.mk" line 146: after make: "varmod-indirect.mk" line 152: before make: "varmod-indirect.mk" line 152: after make: "varmod-indirect.mk" line 156: Unknown modifier "Z" make: "varmod-indirect.mk" line 157: before make: "varmod-indirect.mk" line 157: after ParseReadLine (166): '_:= before ${UNDEF} after' Global: _ = Var_Parse: ${UNDEF} after (eval-keep-dollar-and-undefined) Global: _ = before ${UNDEF} after ParseReadLine (169): '_:= before ${UNDEF:${:US,a,a,}} after' Var_Parse: ${UNDEF:${:US,a,a,}} after (eval-keep-dollar-and-undefined) Indirect modifier "S,a,a," from "${:US,a,a,}" Evaluating modifier ${UNDEF:S...} on value "" (eval-keep-dollar-and-undefined, undefined) Modifier part: "a" Modifier part: "a" -ModifyWords: split "" into 1 words +ModifyWords: split "" into 1 word Result of ${UNDEF:S,a,a,} is "" (eval-keep-dollar-and-undefined, undefined) Global: _ = before ${UNDEF:S,a,a,} after ParseReadLine (179): '_:= before ${UNDEF:${:U}} after' Var_Parse: ${UNDEF:${:U}} after (eval-keep-dollar-and-undefined) Indirect modifier "" from "${:U}" Global: _ = before ${UNDEF:} after ParseReadLine (184): '_:= before ${UNDEF:${:UZ}} after' Var_Parse: ${UNDEF:${:UZ}} after (eval-keep-dollar-and-undefined) Indirect modifier "Z" from "${:UZ}" Evaluating modifier ${UNDEF:Z} on value "" (eval-keep-dollar-and-undefined, undefined) make: "varmod-indirect.mk" line 184: Unknown modifier "Z" Result of ${UNDEF:Z} is error (eval-keep-dollar-and-undefined, undefined) Global: _ = before ${UNDEF:Z} after ParseReadLine (186): '.MAKEFLAGS: -d0' ParseDependency(.MAKEFLAGS: -d0) Global: .MAKEFLAGS = -r -k -d 0 -d pv -d Global: .MAKEFLAGS = -r -k -d 0 -d pv -d 0 make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-localtime.exp b/contrib/bmake/unit-tests/varmod-localtime.exp index ed4d4f053c61..494f160b766e 100644 --- a/contrib/bmake/unit-tests/varmod-localtime.exp +++ b/contrib/bmake/unit-tests/varmod-localtime.exp @@ -1,13 +1,13 @@ -make: "varmod-localtime.mk" line 57: Invalid time value: ${:U1593536400}} != "mtime=11593536400}" +make: "varmod-localtime.mk" line 57: Invalid time value at "${:U1593536400}} != "mtime=11593536400}"" make: "varmod-localtime.mk" line 57: Malformed conditional (${%Y:L:localtime=${:U1593536400}} != "mtime=11593536400}") -make: "varmod-localtime.mk" line 67: Invalid time value: -1} != "" +make: "varmod-localtime.mk" line 67: Invalid time value at "-1} != """ make: "varmod-localtime.mk" line 67: Malformed conditional (${:L:localtime=-1} != "") -make: "varmod-localtime.mk" line 76: Invalid time value: 1} != "" +make: "varmod-localtime.mk" line 76: Invalid time value at " 1} != """ make: "varmod-localtime.mk" line 76: Malformed conditional (${:L:localtime= 1} != "") -make: "varmod-localtime.mk" line 119: Invalid time value: 10000000000000000000000000000000} != "" +make: "varmod-localtime.mk" line 119: Invalid time value at "10000000000000000000000000000000} != """ make: "varmod-localtime.mk" line 119: Malformed conditional (${:L:localtime=10000000000000000000000000000000} != "") -make: "varmod-localtime.mk" line 130: Invalid time value: error} != "" +make: "varmod-localtime.mk" line 130: Invalid time value at "error} != """ make: "varmod-localtime.mk" line 130: Malformed conditional (${:L:localtime=error} != "") make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-localtime.mk b/contrib/bmake/unit-tests/varmod-localtime.mk index f2867b61f8e9..ffa09a0bc5fc 100644 --- a/contrib/bmake/unit-tests/varmod-localtime.mk +++ b/contrib/bmake/unit-tests/varmod-localtime.mk @@ -1,137 +1,137 @@ # $NetBSD: varmod-localtime.mk,v 1.8 2021/01/19 05:26:34 rillig Exp $ # # Tests for the :localtime variable modifier, which formats a timestamp # using strftime(3) in local time. -.if ${TZ} != "Europe/Berlin" # see unit-tests/Makefile +.if ${TZ:Uno:NEurope/Berlin:NUTC-1} != "" # see unit-tests/Makefile . error .endif # Test for the default time format, %c. Since the time always varies, it's # only possible to check for the general format here. The names of the # month and weekday are always in English, independent from the locale. # Example: Thu Oct 29 18:56:41 2020 .if ${:U:localtime:tW:M??? ??? ?? ??\:??\:?? ????} == "" . error .endif # modifier name too short, falling back to the SysV modifier. .if ${%Y:L:localtim=1593536400} != "%Y" . error .endif # 2020-07-01T00:00:00Z .if ${%Y:L:localtime=1593536400} != "2020" . error .endif # modifier name too long, falling back to the SysV modifier. .if ${%Y:L:localtimer=1593536400} != "%Y" . error .endif # If the modifier name is not matched exactly, fall back to the # :from=to modifier. .if ${localtime:L:local%=gm%} != "gmtime" . error .endif # As of 2020-08-16, it is not possible to pass the seconds via a # variable expression. This is because parsing of the :localtime # modifier stops at the '$' and returns to ApplyModifiers. # # There, a colon would be skipped but not a dollar. # Parsing therefore continues at the '$' of the ${:U159...}, looking # for an ordinary variable modifier. # # At this point, the ${:U} is expanded and interpreted as a variable # modifier, which results in the error message "Unknown modifier '1'". # # If ApplyModifier_Localtime were to pass its argument through # ParseModifierPart, this would work. .if ${%Y:L:localtime=${:U1593536400}} != "mtime=11593536400}" . error .endif # Before var.c 1.631 from 2020-10-31 21:40:20, it was possible to pass # negative time stamps to the :localtime modifier, resulting in dates before # 1970. Going back 50 years in the past is not a practical use case for # make. Therefore, since var.c 1.631, negative time stamps produce a # parse error. .if ${:L:localtime=-1} != "" . error .else . error .endif # Spaces were allowed before var.c 1.631 from 2020-10-31 21:40:20, not # because it would make sense but just as a side-effect from using strtoul. .if ${:L:localtime= 1} != "" . error .endif # 0 means now; this differs from GNode.mtime, where a 0 means nonexistent. # Since "now" constantly changes, the strongest possible test is to match the # resulting pattern. .if !${:L:localtime=0:tW:M??? ??? ?? ??\:??\:?? 20??} . error .endif .if ${:L:localtime=1} != "Thu Jan 1 01:00:01 1970" . error .endif # INT32_MAX .if ${:L:localtime=2147483647} != "Tue Jan 19 04:14:07 2038" . error .endif .if ${:L:localtime=2147483648} == "Tue Jan 19 04:14:08 2038" # All systems that have unsigned time_t or 64-bit time_t. .elif ${:L:localtime=2147483648} == "Fri Dec 13 21:45:52 1901" # FreeBSD-12.0-i386 still has 32-bit signed time_t, see # sys/x86/include/_types.h, __LP64__. # # Linux on 32-bit systems may still have 32-bit signed time_t, see # sysdeps/unix/sysv/linux/generic/bits/typesizes.h, __TIMESIZE. .else . error .endif # Integer overflow, at least before var.c 1.631 from 2020-10-31. # Because this modifier is implemented using strtoul, the parsed time was # ULONG_MAX, which got converted to -1. This resulted in a time stamp of # the second before 1970. # # Since var.c 1.631, the overflow is detected and produces a parse error. .if ${:L:localtime=10000000000000000000000000000000} != "" . error .else . error .endif # Before var.c 1.631 from 2020-10-31, there was no error handling while # parsing the :localtime modifier, thus no error message was printed. Parsing # stopped after the '=', and the remaining string was parsed for more variable # modifiers. Because of the unknown modifier 'e' from the 'error', the whole # variable value was discarded and thus not printed. .if ${:L:localtime=error} != "" . error .else . error .endif all: diff --git a/contrib/bmake/unit-tests/cond-op-and.exp b/contrib/bmake/unit-tests/varmod-loop-delete.exp similarity index 51% copy from contrib/bmake/unit-tests/cond-op-and.exp copy to contrib/bmake/unit-tests/varmod-loop-delete.exp index 173b6861a98b..aac86ee39061 100644 --- a/contrib/bmake/unit-tests/cond-op-and.exp +++ b/contrib/bmake/unit-tests/varmod-loop-delete.exp @@ -1,4 +1,4 @@ -make: "cond-op-and.mk" line 43: Malformed conditional (0 &&& 0) +make: "varmod-loop-delete.mk" line 19: Cannot delete variable "VAR" while it is used make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-loop-delete.mk b/contrib/bmake/unit-tests/varmod-loop-delete.mk new file mode 100644 index 000000000000..ed145b59ba0f --- /dev/null +++ b/contrib/bmake/unit-tests/varmod-loop-delete.mk @@ -0,0 +1,33 @@ +# $NetBSD: varmod-loop-delete.mk,v 1.2 2021/12/05 15:51:33 rillig Exp $ +# +# Tests for the variable modifier ':@', which as a side effect allows to +# delete an arbitrary variable. + +# A side effect of the modifier ':@' is that the loop variable is created as +# an actual variable in the current evaluation scope (Command/Global/target), +# and at the end of the loop, this variable is deleted. Since var.c 1.204 +# from 2016-02-18 and before var.c 1.963 from 2021-12-05, a variable could be +# deleted while it was in use, leading to a use-after-free bug. +# +# See Var_Parse, comment 'the value of the variable must not change'. + +# Set up the variable that deletes itself when it is evaluated. +VAR= ${:U:@VAR@@} rest of the value + +# In an assignment, the scope is 'Global'. Since the variable 'VAR' is +# defined in the global scope, it deletes itself. +EVAL:= ${VAR} +.if ${EVAL} != " rest of the value" +. error +.endif + +VAR= ${:U:@VAR@@} rest of the value +all: .PHONY + # In the command that is associated with a target, the scope is the + # one from the target. That scope only contains a few variables like + # '.TARGET', '.ALLSRC', '.IMPSRC'. Make does not expect that these + # variables get modified from the outside. + # + # There is no variable named 'VAR' in the local scope, so nothing + # happens. + : $@: '${VAR}' diff --git a/contrib/bmake/unit-tests/varmod-loop-varname.exp b/contrib/bmake/unit-tests/varmod-loop-varname.exp index 9170307bd2a0..4f0379d5ea0a 100644 --- a/contrib/bmake/unit-tests/varmod-loop-varname.exp +++ b/contrib/bmake/unit-tests/varmod-loop-varname.exp @@ -1,11 +1,11 @@ -make: "varmod-loop-varname.mk" line 13: In the :@ modifier of "", the variable name "${:Ubar:S,b,v,}" must not contain a dollar. -make: "varmod-loop-varname.mk" line 13: Malformed conditional (${:Uone two three:@${:Ubar:S,b,v,}@+${var}+@} != "+one+ +two+ +three+") -make: "varmod-loop-varname.mk" line 80: In the :@ modifier of "1 2 3", the variable name "v$" must not contain a dollar. -make: "varmod-loop-varname.mk" line 80: Malformed conditional (${1 2 3:L:@v$@($v)@} != "(1) (2) (3)") -make: "varmod-loop-varname.mk" line 85: In the :@ modifier of "1 2 3", the variable name "v$$" must not contain a dollar. -make: "varmod-loop-varname.mk" line 85: Malformed conditional (${1 2 3:L:@v$$@($v)@} != "() () ()") -make: "varmod-loop-varname.mk" line 90: In the :@ modifier of "1 2 3", the variable name "v$$$" must not contain a dollar. -make: "varmod-loop-varname.mk" line 90: Malformed conditional (${1 2 3:L:@v$$$@($v)@} != "() () ()") +make: "varmod-loop-varname.mk" line 16: In the :@ modifier of "", the variable name "${:Ubar:S,b,v,}" must not contain a dollar +make: "varmod-loop-varname.mk" line 16: Malformed conditional (${:Uone two three:@${:Ubar:S,b,v,}@+${var}+@} != "+one+ +two+ +three+") +make: "varmod-loop-varname.mk" line 85: In the :@ modifier of "1 2 3", the variable name "v$" must not contain a dollar +make: "varmod-loop-varname.mk" line 85: Malformed conditional (${1 2 3:L:@v$@($v)@} != "(1) (2) (3)") +make: "varmod-loop-varname.mk" line 90: In the :@ modifier of "1 2 3", the variable name "v$$" must not contain a dollar +make: "varmod-loop-varname.mk" line 90: Malformed conditional (${1 2 3:L:@v$$@($v)@} != "() () ()") +make: "varmod-loop-varname.mk" line 95: In the :@ modifier of "1 2 3", the variable name "v$$$" must not contain a dollar +make: "varmod-loop-varname.mk" line 95: Malformed conditional (${1 2 3:L:@v$$$@($v)@} != "() () ()") make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-loop-varname.mk b/contrib/bmake/unit-tests/varmod-loop-varname.mk index d51e2ba76a42..91f8a4876466 100644 --- a/contrib/bmake/unit-tests/varmod-loop-varname.mk +++ b/contrib/bmake/unit-tests/varmod-loop-varname.mk @@ -1,127 +1,132 @@ -# $NetBSD: varmod-loop-varname.mk,v 1.2 2021/04/04 13:35:26 rillig Exp $ +# $NetBSD: varmod-loop-varname.mk,v 1.4 2021/12/05 15:01:04 rillig Exp $ # # Tests for the first part of the variable modifier ':@var@...@', which # contains the variable name to use during the loop. +# Force the test results to be independent of the default value of this +# setting, which is 'yes' for NetBSD's usr.bin/make but 'no' for the bmake +# distribution and pkgsrc/devel/bmake. .MAKE.SAVE_DOLLARS= yes # Before 2021-04-04, the name of the loop variable could be generated # dynamically. There was no practical use-case for this. # Since var.c 1.907 from 2021-04-04, a '$' is no longer allowed in the # variable name. .if ${:Uone two three:@${:Ubar:S,b,v,}@+${var}+@} != "+one+ +two+ +three+" . error +.else +. error .endif # ":::" is a very creative variable name, unlikely to occur in practice. # The expression ${\:\:\:} would not work since backslashes can only # be escaped in the modifiers, but not in the variable name, therefore # the extra indirection via the modifier ':U'. .if ${:U1 2 3:@:::@x${${:U\:\:\:}}y@} != "x1y x2y x3y" . error .endif # "@@" is another creative variable name. .if ${:U1 2 3:@\@\@@x${@@}y@} != "x1y x2y x3y" . error .endif # In extreme cases, even the backslash can be used as variable name. # It needs to be doubled though. .if ${:U1 2 3:@\\@x${${:Ux:S,x,\\,}}y@} != "x1y x2y x3y" . error .endif # The variable name can technically be empty, and in this situation # the variable value cannot be accessed since the empty "variable" # is protected to always return an empty string. .if ${:U1 2 3:@@x${}y@} != "xy xy xy" . error .endif # The :@ modifier resolves the variables from the replacement text once more # than expected. In particular, it resolves _all_ variables from the scope, # and not only the loop variable (in this case v). SRCS= source CFLAGS.source= before ALL_CFLAGS:= ${SRCS:@src@${CFLAGS.${src}}@} # note the ':=' CFLAGS.source+= after .if ${ALL_CFLAGS} != "before" . error .endif # In the following example, the modifier ':@' expands the '$$' to '$'. This # means that when the resulting expression is evaluated, these resulting '$' # will be interpreted as starting a subexpression. # # The d means direct reference, the i means indirect reference. RESOLVE= ${RES1} $${RES1} RES1= 1d${RES2} 1i$${RES2} RES2= 2d${RES3} 2i$${RES3} RES3= 3 .if ${RESOLVE:@v@w${v}w@} != "w1d2d3w w2i3w w1i2d3 2i\${RES3}w w1d2d3 2i\${RES3} 1i\${RES2}w" . error .endif # Until 2020-07-20, the variable name of the :@ modifier could end with one # or two dollar signs, which were silently ignored. # There's no point in allowing a dollar sign in that position. # Since var.c 1.907 from 2021-04-04, a '$' is no longer allowed in the # variable name. .if ${1 2 3:L:@v$@($v)@} != "(1) (2) (3)" . error .else . error .endif .if ${1 2 3:L:@v$$@($v)@} != "() () ()" . error .else . error .endif .if ${1 2 3:L:@v$$$@($v)@} != "() () ()" . error .else . error .endif # It may happen that there are nested :@ modifiers that use the same name for # for the loop variable. These modifiers influence each other. # # As of 2020-10-18, the :@ modifier is implemented by actually setting a # variable in the scope of the expression and deleting it again after the # loop. This is different from the .for loops, which substitute the variable # expression with ${:Uvalue}, leading to different unwanted side effects. # # To make the behavior more predictable, the :@ modifier should restore the # loop variable to the value it had before the loop. This would result in # the string "1a b c1 2a b c2 3a b c3", making the two loops independent. .if ${:U1 2 3:@i@$i${:Ua b c:@i@$i@}${i:Uu}@} != "1a b cu 2a b cu 3a b cu" . error .endif # During the loop, the variable is actually defined and nonempty. # If the loop were implemented in the same way as the .for loop, the variable # would be neither defined nor nonempty since all expressions of the form # ${var} would have been replaced with ${:Uword} before evaluating them. .if defined(var) . error .endif .if ${:Uword:@var@${defined(var):?def:undef} ${empty(var):?empty:nonempty}@} \ != "def nonempty" . error .endif .if defined(var) . error .endif all: .PHONY diff --git a/contrib/bmake/unit-tests/varmod-loop.exp b/contrib/bmake/unit-tests/varmod-loop.exp index a4704973f6e2..d05b870d5b5e 100644 --- a/contrib/bmake/unit-tests/varmod-loop.exp +++ b/contrib/bmake/unit-tests/varmod-loop.exp @@ -1,16 +1,16 @@ -ParseReadLine (75): 'USE_8_DOLLARS= ${:U1:@var@${8_DOLLARS}@} ${8_DOLLARS} $$$$$$$$' +ParseReadLine (78): 'USE_8_DOLLARS= ${:U1:@var@${8_DOLLARS}@} ${8_DOLLARS} $$$$$$$$' CondParser_Eval: ${USE_8_DOLLARS} != "\$\$\$\$ \$\$\$\$ \$\$\$\$" lhs = "$$$$ $$$$ $$$$", rhs = "$$$$ $$$$ $$$$", op = != -ParseReadLine (80): 'SUBST_CONTAINING_LOOP:= ${USE_8_DOLLARS}' +ParseReadLine (83): 'SUBST_CONTAINING_LOOP:= ${USE_8_DOLLARS}' CondParser_Eval: ${SUBST_CONTAINING_LOOP} != "\$\$ \$\$\$\$ \$\$\$\$" lhs = "$$ $$$$ $$$$", rhs = "$$ $$$$ $$$$", op = != -ParseReadLine (105): '.MAKEFLAGS: -d0' +ParseReadLine (108): '.MAKEFLAGS: -d0' ParseDependency(.MAKEFLAGS: -d0) :varname-overwriting-target: :x1y x2y x3y: :: mod-loop-dollar:1: mod-loop-dollar:${word}$: mod-loop-dollar:$3$: mod-loop-dollar:$${word}$$: mod-loop-dollar:$$5$$: mod-loop-dollar:$$${word}$$$: exit status 0 diff --git a/contrib/bmake/unit-tests/varmod-loop.mk b/contrib/bmake/unit-tests/varmod-loop.mk index 4fdaa3ff4e61..82046ff95d79 100644 --- a/contrib/bmake/unit-tests/varmod-loop.mk +++ b/contrib/bmake/unit-tests/varmod-loop.mk @@ -1,189 +1,189 @@ -# $NetBSD: varmod-loop.mk,v 1.15 2021/04/11 13:35:56 rillig Exp $ +# $NetBSD: varmod-loop.mk,v 1.18 2021/12/05 15:20:13 rillig Exp $ # # Tests for the :@var@...${var}...@ variable modifier. +# Force the test results to be independent of the default value of this +# setting, which is 'yes' for NetBSD's usr.bin/make but 'no' for the bmake +# distribution and pkgsrc/devel/bmake. .MAKE.SAVE_DOLLARS= yes all: varname-overwriting-target all: mod-loop-dollar varname-overwriting-target: # Even "@" works as a variable name since the variable is installed # in the "current" scope, which in this case is the one from the # target. Because of this, after the loop has finished, '$@' is # undefined. This is something that make doesn't expect, this may # even trigger an assertion failure somewhere. @echo :$@: :${:U1 2 3:@\@@x${@}y@}: :$@: # Demonstrate that it is possible to generate dollar signs using the # :@ modifier. # # These are edge cases that could have resulted in a parse error as well # since the $@ at the end could have been interpreted as a variable, which # would mean a missing closing @ delimiter. mod-loop-dollar: @echo $@:${:U1:@word@${word}$@:Q}: @echo $@:${:U2:@word@$${word}$$@:Q}: @echo $@:${:U3:@word@$$${word}$$$@:Q}: @echo $@:${:U4:@word@$$$${word}$$$$@:Q}: @echo $@:${:U5:@word@$$$$${word}$$$$$@:Q}: @echo $@:${:U6:@word@$$$$$${word}$$$$$$@:Q}: # It may happen that there are nested :@ modifiers that use the same name for # for the loop variable. These modifiers influence each other. # # As of 2020-10-18, the :@ modifier is implemented by actually setting a # variable in the scope of the expression and deleting it again after the # loop. This is different from the .for loops, which substitute the variable # expression with ${:Uvalue}, leading to different unwanted side effects. # # To make the behavior more predictable, the :@ modifier should restore the # loop variable to the value it had before the loop. This would result in # the string "1a b c1 2a b c2 3a b c3", making the two loops independent. .if ${:U1 2 3:@i@$i${:Ua b c:@i@$i@}${i:Uu}@} != "1a b cu 2a b cu 3a b cu" . error .endif # During the loop, the variable is actually defined and nonempty. # If the loop were implemented in the same way as the .for loop, the variable # would be neither defined nor nonempty since all expressions of the form # ${var} would have been replaced with ${:Uword} before evaluating them. .if defined(var) . error .endif .if ${:Uword:@var@${defined(var):?def:undef} ${empty(var):?empty:nonempty}@} \ != "def nonempty" . error .endif .if defined(var) . error .endif # Assignment using the ':=' operator, combined with the :@var@ modifier # 8_DOLLARS= $$$$$$$$ # This string literal is written with 8 dollars, and this is saved as the # variable value. But as soon as this value is evaluated, it goes through # Var_Subst, which replaces each '$$' with a single '$'. This could be # prevented by VARE_EVAL_KEEP_DOLLAR, but that flag is usually removed # before expanding subexpressions. See ApplyModifier_Loop and # ParseModifierPart for examples. # .MAKEFLAGS: -dcp USE_8_DOLLARS= ${:U1:@var@${8_DOLLARS}@} ${8_DOLLARS} $$$$$$$$ .if ${USE_8_DOLLARS} != "\$\$\$\$ \$\$\$\$ \$\$\$\$" . error .endif # SUBST_CONTAINING_LOOP:= ${USE_8_DOLLARS} # The ':=' assignment operator evaluates the variable value using the mode # VARE_KEEP_DOLLAR_UNDEF, which means that some dollar signs are preserved, # but not all. The dollar signs in the top-level expression and in the # indirect ${8_DOLLARS} are preserved. # # The variable modifier :@var@ does not preserve the dollar signs though, no # matter in which context it is evaluated. What happens in detail is: # First, the modifier part "${8_DOLLARS}" is parsed without expanding it. # Next, each word of the value is expanded on its own, and at this moment # in ApplyModifier_Loop, the flag keepDollar is not passed down to # ModifyWords, resulting in "$$$$" for the first word of USE_8_DOLLARS. # # The remaining words of USE_8_DOLLARS are not affected by any variable # modifier and are thus expanded with the flag keepDollar in action. # The variable SUBST_CONTAINING_LOOP therefore gets assigned the raw value # "$$$$ $$$$$$$$ $$$$$$$$". # # The variable expression in the condition then expands this raw stored value # once, resulting in "$$ $$$$ $$$$". The effects from VARE_KEEP_DOLLAR no # longer take place since they had only been active during the evaluation of # the variable assignment. .if ${SUBST_CONTAINING_LOOP} != "\$\$ \$\$\$\$ \$\$\$\$" . error .endif .MAKEFLAGS: -d0 # After looping over the words of the expression, the loop variable gets # undefined. The modifier ':@' uses an ordinary global variable for this, # which is different from the '.for' loop, which replaces ${var} with # ${:Uvalue} in the body of the loop. This choice of implementation detail # can be used for a nasty side effect. The expression ${:U:@VAR@@} evaluates # to an empty string, plus it undefines the variable 'VAR'. This is the only # possibility to undefine a global variable during evaluation. GLOBAL= before-global RESULT:= ${:U${GLOBAL} ${:U:@GLOBAL@@} ${GLOBAL:Uundefined}} .if ${RESULT} != "before-global undefined" . error .endif # The above side effect of undefining a variable from a certain scope can be # further combined with the otherwise undocumented implementation detail that # the argument of an '.if' directive is evaluated in cmdline scope. Putting # these together makes it possible to undefine variables from the cmdline # scope, something that is not possible in a straight-forward way. .MAKEFLAGS: CMDLINE=cmdline .if ${:U${CMDLINE}${:U:@CMDLINE@@}} != "cmdline" . error .endif # Now the cmdline variable got undefined. .if ${CMDLINE} != "cmdline" . error .endif # At this point, it still looks as if the cmdline variable were defined, # since the value of CMDLINE is still "cmdline". That impression is only # superficial though, the cmdline variable is actually deleted. To # demonstrate this, it is now possible to override its value using a global # variable, something that was not possible before: CMDLINE= global .if ${CMDLINE} != "global" . error .endif # Now undefine that global variable again, to get back to the original value. .undef CMDLINE .if ${CMDLINE} != "cmdline" . error .endif # What actually happened is that when CMDLINE was set by the '.MAKEFLAGS' # target in the cmdline scope, that same variable was exported to the # environment, see Var_SetWithFlags. .unexport CMDLINE .if ${CMDLINE} != "cmdline" . error .endif # The above '.unexport' has no effect since UnexportVar requires a global # variable of the same name to be defined, otherwise nothing is unexported. CMDLINE= global .unexport CMDLINE .undef CMDLINE .if ${CMDLINE} != "cmdline" . error .endif # This still didn't work since there must not only be a global variable, the # variable must be marked as exported as well, which it wasn't before. CMDLINE= global .export CMDLINE .unexport CMDLINE .undef CMDLINE .if ${CMDLINE:Uundefined} != "undefined" . error .endif # Finally the variable 'CMDLINE' from the cmdline scope is gone, and all its # traces from the environment are gone as well. To do that, a global variable # had to be defined and exported, something that is far from obvious. To # recap, here is the essence of the above story: .MAKEFLAGS: CMDLINE=cmdline # have a cmdline + environment variable .if ${:U:@CMDLINE@@}} # undefine cmdline, keep environment .endif CMDLINE= global # needed for deleting the environment .export CMDLINE # needed for deleting the environment .unexport CMDLINE # delete the environment .undef CMDLINE # delete the global helper variable .if ${CMDLINE:Uundefined} != "undefined" . error # 'CMDLINE' is gone now from all scopes .endif - -# TODO: Actually trigger the undefined behavior (use after free) that was -# already suspected in Var_Parse, in the comment 'the value of the variable -# must not change'. +all: .PHONY diff --git a/contrib/bmake/unit-tests/deptgt-default.exp b/contrib/bmake/unit-tests/varmod-order-numeric.exp similarity index 100% copy from contrib/bmake/unit-tests/deptgt-default.exp copy to contrib/bmake/unit-tests/varmod-order-numeric.exp diff --git a/contrib/bmake/unit-tests/varmod-order-numeric.mk b/contrib/bmake/unit-tests/varmod-order-numeric.mk new file mode 100644 index 000000000000..40a1d408e9ae --- /dev/null +++ b/contrib/bmake/unit-tests/varmod-order-numeric.mk @@ -0,0 +1,54 @@ +# $NetBSD: varmod-order-numeric.mk,v 1.5 2021/08/03 04:46:49 rillig Exp $ +# +# Tests for the variable modifiers ':On', which returns the words, sorted in +# ascending numeric order, and for ':Orn' and ':Onr', which additionally +# reverse the order. +# +# The variable modifiers ':On', ':Onr' and ':Orn' were added in var.c 1.939 +# from 2021-07-30. + +# This list contains only 32-bit numbers since the make code needs to conform +# to C90, which does not provide integer types larger than 32 bit. It uses +# 'long long' by default, but that type is overridable if necessary to support +# older environments. +# +# To get 53-bit integers even in C90, it would be possible to switch to +# 'double' instead, but that would allow floating-point numbers as well, which +# is out of scope for this variable modifier. +NUMBERS= 3 5 7 1 42 -42 5K -3m 1M 1k -2G + +.if ${NUMBERS:On} != "-2G -3m -42 1 3 5 7 42 1k 5K 1M" +. error ${NUMBERS:On} +.endif + +.if ${NUMBERS:Orn} != "1M 5K 1k 42 7 5 3 1 -42 -3m -2G" +. error ${NUMBERS:Orn} +.endif + +# Both ':Onr' and ':Orn' have the same effect. +.if ${NUMBERS:Onr} != "1M 5K 1k 42 7 5 3 1 -42 -3m -2G" +. error ${NUMBERS:Onr} +.endif + +# Duplicate numbers are preserved in the output. In this case the +# equal-valued numbers are spelled the same, so they are indistinguishable in +# the output. +DUPLICATES= 3 1 2 2 1 1 # https://oeis.org/A034002 +.if ${DUPLICATES:On} != "1 1 1 2 2 3" +. error ${DUPLICATES:On} +.endif + +# If there are several numbers that have the same integer value, they are +# returned in unspecified order. +SAME_VALUE:= ${:U 79 80 0x0050 81 :On} +.if ${SAME_VALUE} != "79 80 0x0050 81" && ${SAME_VALUE} != "79 0x0050 80 81" +. error ${SAME_VALUE} +.endif + +# Hexadecimal and octal numbers are supported as well. +MIXED_BASE= 0 010 0x7 9 +.if ${MIXED_BASE:On} != "0 0x7 010 9" +. error ${MIXED_BASE:On} +.endif + +all: diff --git a/contrib/bmake/unit-tests/varmod-order-reverse.mk b/contrib/bmake/unit-tests/varmod-order-reverse.mk index 1a6d2d766f76..c3be8d0f7817 100644 --- a/contrib/bmake/unit-tests/varmod-order-reverse.mk +++ b/contrib/bmake/unit-tests/varmod-order-reverse.mk @@ -1,13 +1,12 @@ -# $NetBSD: varmod-order-reverse.mk,v 1.4 2020/10/24 08:46:08 rillig Exp $ +# $NetBSD: varmod-order-reverse.mk,v 1.5 2021/08/03 04:46:49 rillig Exp $ # # Tests for the :Or variable modifier, which returns the words, sorted in # descending order. -NUMBERS= one two three four five six seven eight nine ten +WORDS= one two three four five six seven eight nine ten -.if ${NUMBERS:Or} != "two three ten six seven one nine four five eight" -. error ${NUMBERS:Or} +.if ${WORDS:Or} != "two three ten six seven one nine four five eight" +. error ${WORDS:Or} .endif all: - @:; diff --git a/contrib/bmake/unit-tests/varmod-order-shuffle.mk b/contrib/bmake/unit-tests/varmod-order-shuffle.mk index 185141b6c4a5..16121d7e498f 100644 --- a/contrib/bmake/unit-tests/varmod-order-shuffle.mk +++ b/contrib/bmake/unit-tests/varmod-order-shuffle.mk @@ -1,43 +1,42 @@ -# $NetBSD: varmod-order-shuffle.mk,v 1.6 2020/11/09 20:16:33 rillig Exp $ +# $NetBSD: varmod-order-shuffle.mk,v 1.7 2021/08/03 04:46:49 rillig Exp $ # # Tests for the :Ox variable modifier, which returns the words of the # variable, shuffled. # # The variable modifier :Ox is available since 2005-06-01. # # As of 2020-08-16, make uses random(3) seeded by the current time in seconds. # This makes the random numbers completely predictable since there is no other # part of make that uses random numbers. # # Tags: probabilistic -NUMBERS= one two three four five six seven eight nine ten +WORDS= one two three four five six seven eight nine ten # Note that 1 in every 10! trials two independently generated # randomized orderings will be the same. The test framework doesn't # support checking probabilistic output, so we accept that each of the # 3 :Ox tests will incorrectly fail with probability 2.756E-7, which # lets the whole test fail once in 1.209.600 runs, on average. # Create two shuffles using the := assignment operator. -shuffled1:= ${NUMBERS:Ox} -shuffled2:= ${NUMBERS:Ox} +shuffled1:= ${WORDS:Ox} +shuffled2:= ${WORDS:Ox} .if ${shuffled1} == ${shuffled2} . error ${shuffled1} == ${shuffled2} .endif # Sorting the list before shuffling it has no effect. -shuffled1:= ${NUMBERS:O:Ox} -shuffled2:= ${NUMBERS:O:Ox} +shuffled1:= ${WORDS:O:Ox} +shuffled2:= ${WORDS:O:Ox} .if ${shuffled1} == ${shuffled2} . error ${shuffled1} == ${shuffled2} .endif # Sorting after shuffling must produce the original numbers. -sorted:= ${NUMBERS:Ox:O} -.if ${sorted} != ${NUMBERS:O} -. error ${sorted} != ${NUMBERS:O} +sorted:= ${WORDS:Ox:O} +.if ${sorted} != ${WORDS:O} +. error ${sorted} != ${WORDS:O} .endif all: - @:; diff --git a/contrib/bmake/unit-tests/deptgt-default.exp b/contrib/bmake/unit-tests/varmod-order-string.exp similarity index 100% copy from contrib/bmake/unit-tests/deptgt-default.exp copy to contrib/bmake/unit-tests/varmod-order-string.exp diff --git a/contrib/bmake/unit-tests/varmod-order-string.mk b/contrib/bmake/unit-tests/varmod-order-string.mk new file mode 100644 index 000000000000..bb0a145ba825 --- /dev/null +++ b/contrib/bmake/unit-tests/varmod-order-string.mk @@ -0,0 +1,28 @@ +# $NetBSD: varmod-order-string.mk,v 1.2 2021/08/03 04:46:49 rillig Exp $ +# +# Tests for the :O variable modifier, which returns the words, sorted in +# ascending order. + +# Simple words are sorted lexicographically. +WORDS= one two three four five six seven eight nine ten +.if ${WORDS:O} != "eight five four nine one seven six ten three two" +. error ${WORDS:O} +.endif + +# Double quotes and single quotes delimit words, while backticks are just +# regular characters. Therefore '`in' is a separate word from 'backticks`', +# and the additional spaces between them are removed. +QUOTED_WORDS= none "double quoted" 'single quoted' `in backticks` +.if ${QUOTED_WORDS:O} != "\"double quoted\" 'single quoted' `in backticks` none" +. error ${QUOTED_WORDS:O} +.endif + +# Numbers are sorted lexicographically as well. +# To sort the words numerically, use ':On' instead; since var.c 1.939 from +# 2021-07-30. +NUMBERS= -100g -50m -7k -50 -13 0 000 13 50 5k1 7k 50m 100G +.if ${NUMBERS:O} != "-100g -13 -50 -50m -7k 0 000 100G 13 50 50m 5k1 7k" +. error ${NUMBERS:O} +.endif + +all: diff --git a/contrib/bmake/unit-tests/varmod-order.exp b/contrib/bmake/unit-tests/varmod-order.exp index 94c3cb694886..46dc45e9f6d6 100644 --- a/contrib/bmake/unit-tests/varmod-order.exp +++ b/contrib/bmake/unit-tests/varmod-order.exp @@ -1,7 +1,24 @@ -make: Bad modifier ":OX" for variable "NUMBERS" -make: "varmod-order.mk" line 13: Undefined variable "${NUMBERS:OX" -make: Bad modifier ":OxXX" for variable "NUMBERS" -make: "varmod-order.mk" line 16: Undefined variable "${NUMBERS:Ox" +make: Bad modifier ":OX" for variable "WORDS" +make: "varmod-order.mk" line 14: Undefined variable "${WORDS:OX" +make: Bad modifier ":OxXX" for variable "WORDS" +make: "varmod-order.mk" line 17: Undefined variable "${WORDS:Ox" +make: Unclosed variable expression, expecting '}' for modifier "O" of variable "WORDS" with value "eight five four nine one seven six ten three two" +make: Unclosed variable expression, expecting '}' for modifier "On" of variable "NUMBERS" with value "1 2 3 4 5 6 7 8 9 10" +make: Unclosed variable expression, expecting '}' for modifier "Onr" of variable "NUMBERS" with value "10 9 8 7 6 5 4 3 2 1" +make: Bad modifier ":Oxn" for variable "NUMBERS" +make: "varmod-order.mk" line 29: Malformed conditional (${NUMBERS:Oxn}) +make: Bad modifier ":On_typo" for variable "NUMBERS" +make: "varmod-order.mk" line 39: Malformed conditional (${NUMBERS:On_typo}) +make: Bad modifier ":Onr_typo" for variable "NUMBERS" +make: "varmod-order.mk" line 48: Malformed conditional (${NUMBERS:Onr_typo}) +make: Bad modifier ":Orn_typo" for variable "NUMBERS" +make: "varmod-order.mk" line 57: Malformed conditional (${NUMBERS:Orn_typo}) +make: Bad modifier ":Onn" for variable "NUMBERS" +make: "varmod-order.mk" line 68: Malformed conditional (${NUMBERS:Onn}) +make: Bad modifier ":Onrr" for variable "NUMBERS" +make: "varmod-order.mk" line 77: Malformed conditional (${NUMBERS:Onrr}) +make: Bad modifier ":Orrn" for variable "NUMBERS" +make: "varmod-order.mk" line 86: Malformed conditional (${NUMBERS:Orrn}) make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-order.mk b/contrib/bmake/unit-tests/varmod-order.mk index 675b6efec5e7..7f3d485fe8e3 100644 --- a/contrib/bmake/unit-tests/varmod-order.mk +++ b/contrib/bmake/unit-tests/varmod-order.mk @@ -1,19 +1,92 @@ -# $NetBSD: varmod-order.mk,v 1.5 2020/10/24 08:46:08 rillig Exp $ +# $NetBSD: varmod-order.mk,v 1.7 2021/08/03 04:46:49 rillig Exp $ # -# Tests for the :O variable modifier, which returns the words, sorted in -# ascending order. +# Tests for the :O variable modifier and its variants, which either sort the +# words of the value or shuffle them. -NUMBERS= one two three four five six seven eight nine ten +WORDS= one two three four five six seven eight nine ten +NUMBERS= 8 5 4 9 1 7 6 10 3 2 # in English alphabetical order -.if ${NUMBERS:O} != "eight five four nine one seven six ten three two" -. error ${NUMBERS:O} +.if ${WORDS:O} != "eight five four nine one seven six ten three two" +. error ${WORDS:O} .endif # Unknown modifier "OX" -_:= ${NUMBERS:OX} +_:= ${WORDS:OX} # Unknown modifier "OxXX" -_:= ${NUMBERS:OxXX} +_:= ${WORDS:OxXX} + +# Missing closing brace, to cover the error handling code. +_:= ${WORDS:O +_:= ${NUMBERS:On +_:= ${NUMBERS:Onr + +# Shuffling numerically doesn't make sense, so don't allow 'x' and 'n' to be +# combined. +# +# expect-text: Bad modifier ":Oxn" for variable "NUMBERS" +# expect+1: Malformed conditional (${NUMBERS:Oxn}) +.if ${NUMBERS:Oxn} +. error +.else +. error +.endif + +# Extra characters after ':On' are detected and diagnosed. +# TODO: Add line number information to the "Bad modifier" diagnostic. +# +# expect-text: Bad modifier ":On_typo" for variable "NUMBERS" +.if ${NUMBERS:On_typo} +. error +.else +. error +.endif + +# Extra characters after ':Onr' are detected and diagnosed. +# +# expect-text: Bad modifier ":Onr_typo" for variable "NUMBERS" +.if ${NUMBERS:Onr_typo} +. error +.else +. error +.endif + +# Extra characters after ':Orn' are detected and diagnosed. +# +# expect+1: Bad modifier ":Orn_typo" for variable "NUMBERS" +.if ${NUMBERS:Orn_typo} +. error +.else +. error +.endif + +# Repeating the 'n' is not supported. In the typical use cases, the sorting +# criteria are fixed, not computed, therefore allowing this redundancy does +# not make sense. +# +# expect-text: Bad modifier ":Onn" for variable "NUMBERS" +.if ${NUMBERS:Onn} +. error +.else +. error +.endif + +# Repeating the 'r' is not supported as well, for the same reasons as above. +# +# expect-text: Bad modifier ":Onrr" for variable "NUMBERS" +.if ${NUMBERS:Onrr} +. error +.else +. error +.endif + +# Repeating the 'r' is not supported as well, for the same reasons as above. +# +# expect-text: Bad modifier ":Orrn" for variable "NUMBERS" +.if ${NUMBERS:Orrn} +. error +.else +. error +.endif all: - @:; diff --git a/contrib/bmake/unit-tests/varmod-root.exp b/contrib/bmake/unit-tests/varmod-root.exp index 2c99cd3ef4c7..39a9383953dd 100644 --- a/contrib/bmake/unit-tests/varmod-root.exp +++ b/contrib/bmake/unit-tests/varmod-root.exp @@ -1,11 +1 @@ -root of 'a/b/c' is 'a/b/c' -root of 'def' is 'def' -root of 'a.b.c' is 'a.b' -root of 'a.b/c' is 'a' -root of 'a' is 'a' -root of 'a.a' is 'a' -root of '.gitignore' is '' -root of 'a' is 'a' -root of 'a.a' is 'a' -root of 'trailing/' is 'trailing/' exit status 0 diff --git a/contrib/bmake/unit-tests/varmod-root.mk b/contrib/bmake/unit-tests/varmod-root.mk index 1e3159733df0..cf88491df799 100644 --- a/contrib/bmake/unit-tests/varmod-root.mk +++ b/contrib/bmake/unit-tests/varmod-root.mk @@ -1,9 +1,38 @@ -# $NetBSD: varmod-root.mk,v 1.4 2020/12/20 22:57:40 rillig Exp $ +# $NetBSD: varmod-root.mk,v 1.5 2021/12/05 22:31:58 rillig Exp $ # # Tests for the :R variable modifier, which returns the filename root # without the extension. +.if ${a/b/c:L:R} != "a/b/c" +. error +.endif + +.if ${def:L:R} != "def" +. error +.endif + +.if ${a.b.c:L:R} != "a.b" +. error +.endif + +.if ${a.b/c:L:R} != "a" +. error +.endif + +.if ${a:L:R} != "a" +. error +.endif + +.if ${a.a:L:R} != "a" +. error +.endif + +.if ${.gitignore:L:R} != "" +. error +.endif + +.if ${trailing/:L:R} != "trailing/" +. error +.endif + all: -.for path in a/b/c def a.b.c a.b/c a a.a .gitignore a a.a trailing/ - @echo "root of '"${path:Q}"' is '"${path:R:Q}"'" -.endfor diff --git a/contrib/bmake/unit-tests/varmod-select-words.mk b/contrib/bmake/unit-tests/varmod-select-words.mk index a9df25f9ff32..ab094bf056b0 100644 --- a/contrib/bmake/unit-tests/varmod-select-words.mk +++ b/contrib/bmake/unit-tests/varmod-select-words.mk @@ -1,9 +1,12 @@ -# $NetBSD: varmod-select-words.mk,v 1.2 2020/08/16 14:25:16 rillig Exp $ +# $NetBSD: varmod-select-words.mk,v 1.3 2021/12/05 12:06:23 rillig Exp $ # # Tests for the :[...] variable modifier, which selects a single word # or a range of words from a variable. +# +# See also: +# modword.mk (should be migrated here) # TODO: Implementation all: @:; diff --git a/contrib/bmake/unit-tests/varmod-subst.mk b/contrib/bmake/unit-tests/varmod-subst.mk index 85f41e499ab7..763535ff835a 100644 --- a/contrib/bmake/unit-tests/varmod-subst.mk +++ b/contrib/bmake/unit-tests/varmod-subst.mk @@ -1,189 +1,202 @@ -# $NetBSD: varmod-subst.mk,v 1.8 2021/05/14 19:37:16 rillig Exp $ +# $NetBSD: varmod-subst.mk,v 1.9 2021/09/06 21:18:55 rillig Exp $ # # Tests for the :S,from,to, variable modifier. all: mod-subst all: mod-subst-delimiter all: mod-subst-chain all: mod-subst-dollar WORDS= sequences of letters .if ${WORDS:S,,,} != ${WORDS} . warning The empty pattern matches something. .endif .if ${WORDS:S,e,*,1} != "s*quences of letters" . warning The :S modifier flag '1' is not applied exactly once. .endif .if ${WORDS:S,f,*,1} != "sequences o* letters" . warning The :S modifier flag '1' is only applied to the first word,\ not to the first occurrence. .endif .if ${WORDS:S,e,*,} != "s*quences of l*tters" . warning The :S modifier does not replace every first match per word. .endif .if ${WORDS:S,e,*,g} != "s*qu*nc*s of l*tt*rs" . warning The :S modifier flag 'g' does not replace every occurrence. .endif .if ${WORDS:S,^sequ,occurr,} != "occurrences of letters" . warning The :S modifier fails for a short match anchored at the start. .endif .if ${WORDS:S,^of,with,} != "sequences with letters" . warning The :S modifier fails for an exact match anchored at the start. .endif .if ${WORDS:S,^office,does not match,} != ${WORDS} . warning The :S modifier matches a too long pattern anchored at the start. .endif .if ${WORDS:S,f$,r,} != "sequences or letters" . warning The :S modifier fails for a short match anchored at the end. .endif .if ${WORDS:S,s$,,} != "sequence of letter" . warning The :S modifier fails to replace one occurrence per word. .endif .if ${WORDS:S,of$,,} != "sequences letters" . warning The :S modifier fails for an exact match anchored at the end. .endif .if ${WORDS:S,eof$,,} != ${WORDS} . warning The :S modifier matches a too long pattern anchored at the end. .endif .if ${WORDS:S,^of$,,} != "sequences letters" . warning The :S modifier does not match a word anchored at both ends. .endif .if ${WORDS:S,^o$,,} != ${WORDS} . warning The :S modifier matches a prefix anchored at both ends. .endif .if ${WORDS:S,^f$,,} != ${WORDS} . warning The :S modifier matches a suffix anchored at both ends. .endif .if ${WORDS:S,^eof$,,} != ${WORDS} . warning The :S modifier matches a too long prefix anchored at both ends. .endif .if ${WORDS:S,^office$,,} != ${WORDS} . warning The :S modifier matches a too long suffix anchored at both ends. .endif .if ${WORDS:S,*,replacement,} != ${WORDS} . error The '*' seems to be interpreted as a wildcard of some kind. .endif .if ${WORDS:S,.,replacement,} != ${WORDS} . error The '.' seems to be interpreted as a wildcard of some kind. .endif +.if ${:Uvalue:S,^val,&,} != "value" +. error +.endif +.if ${:Uvalue:S,ue$,&,} != "value" +. error +.endif +.if ${:Uvalue:S,^val,&-&-&,} != "val-val-value" +. error +.endif +.if ${:Uvalue:S,ue$,&-&-&,} != "value-ue-ue" +. error +.endif + mod-subst: @echo $@: @echo :${:Ua b b c:S,a b,,:Q}: @echo :${:Ua b b c:S,a b,,1:Q}: @echo :${:Ua b b c:S,a b,,W:Q}: @echo :${:Ua b b c:S,b,,g:Q}: @echo :${:U1 2 3 1 2 3:S,1 2,___,Wg:S,_,x,:Q}: @echo ${:U12345:S,,sep,g:Q} # The :S and :C modifiers accept an arbitrary character as the delimiter, # including characters that are otherwise used as escape characters or # interpreted in a special way. This can be used to confuse humans. mod-subst-delimiter: @echo $@: @echo ${:U1 2 3:S 2 two :Q} horizontal tabulator @echo ${:U1 2 3:S 2 two :Q} space @echo ${:U1 2 3:S!2!two!:Q} exclamation mark @echo ${:U1 2 3:S"2"two":Q} quotation mark # In shell command lines, the hash does not need to be escaped. # It needs to be escaped in variable assignment lines though. @echo ${:U1 2 3:S#2#two#:Q} number sign @echo ${:U1 2 3:S$2$two$:Q} dollar sign @echo ${:U1 2 3:S%2%two%:Q} percent sign @echo ${:U1 2 3:S&2&two&:Q} ampersand @echo ${:U1 2 3:S'2'two':Q} apostrophe @echo ${:U1 2 3:S(2(two(:Q} left parenthesis @echo ${:U1 2 3:S)2)two):Q} right parenthesis @echo ${:U1 2 3:S*2*two*:Q} asterisk @echo ${:U1 2 3:S+2+two+:Q} plus sign @echo ${:U1 2 3:S,2,two,:Q} comma @echo ${:U1 2 3:S-2-two-:Q} hyphen-minus @echo ${:U1 2 3:S.2.two.:Q} full stop @echo ${:U1 2 3:S/2/two/:Q} solidus @echo ${:U1 2 3:S121two1:Q} digit @echo ${:U1 2 3:S:2:two::Q} colon @echo ${:U1 2 3:S;2;two;:Q} semicolon @echo ${:U1 2 3:S<22>two>:Q} greater-than sign @echo ${:U1 2 3:S?2?two?:Q} question mark @echo ${:U1 2 3:S@2@two@:Q} commercial at @echo ${:U1 2 3:SA2AtwoA:Q} capital letter @echo ${:U1 2 3:S[2[two[:Q} left square bracket @echo ${:U1 2 3:S\2\two\:Q} reverse solidus @echo ${:U1 2 3:S]2]two]:Q} right square bracket @echo ${:U1 2 3:S^2^two^:Q} circumflex accent @echo ${:U1 2 3:S_2_two_:Q} low line @echo ${:U1 2 3:S`2`two`:Q} grave accent @echo ${:U1 2 3:Sa2atwoa:Q} small letter @echo ${:U1 2 3:S{2{two{:Q} left curly bracket @echo ${:U1 2 3:S|2|two|:Q} vertical line @echo ${:U1 2 3:S}2}two}:Q} right curly bracket @echo ${:U1 2 3:S~2~two~:Q} tilde # The :S and :C modifiers can be chained without a separating ':'. # This is not documented in the manual page. # It works because ApplyModifier_Subst scans for the known modifiers g1W # and then just returns to ApplyModifiers. There, the colon is optionally # skipped (see the *st.next == ':' at the end of the loop). # # Most other modifiers cannot be chained since their parsers skip until # the next ':' or '}' or ')'. mod-subst-chain: @echo $@: @echo ${:Ua b c:S,a,A,S,b,B,}. # There is no 'i' modifier for the :S or :C modifiers. # The error message is "make: Unknown modifier 'i'", which is # kind of correct, although it is mixing the terms for variable # modifiers with the matching modifiers. @echo ${:Uvalue:S,a,x,i}. # No matter how many dollar signs there are, they all get merged # into a single dollar by the :S modifier. # # As of 2020-08-09, this is because ParseModifierPart sees a '$' and # calls Var_Parse to expand the variable. In all other places, the "$$" # is handled outside of Var_Parse. Var_Parse therefore considers "$$" # one of the "really stupid names", skips the first dollar, and parsing # continues with the next character. This repeats for the other dollar # signs, except the one before the delimiter. That one is handled by # the code that optionally interprets the '$' as the end-anchor in the # first part of the :S modifier. That code doesn't call Var_Parse but # simply copies the dollar to the result. mod-subst-dollar: @echo $@:${:U1:S,^,$,:Q}: @echo $@:${:U2:S,^,$$,:Q}: @echo $@:${:U3:S,^,$$$,:Q}: @echo $@:${:U4:S,^,$$$$,:Q}: @echo $@:${:U5:S,^,$$$$$,:Q}: @echo $@:${:U6:S,^,$$$$$$,:Q}: @echo $@:${:U7:S,^,$$$$$$$,:Q}: @echo $@:${:U8:S,^,$$$$$$$$,:Q}: @echo $@:${:U40:S,^,$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$,:Q}: # This generates no dollar at all: @echo $@:${:UU8:S,^,${:U$$$$$$$$},:Q}: # Here is an alternative way to generate dollar signs. # It's unexpectedly complicated though. @echo $@:${:U:range=5:ts\x24:C,[0-9],,g:Q}: # In modifiers, dollars are escaped using the backslash, not using another # dollar sign. Therefore, creating a dollar sign is pretty simple: @echo $@:${:Ugood3:S,^,\$\$\$,:Q} diff --git a/contrib/bmake/unit-tests/varmod-to-separator.exp b/contrib/bmake/unit-tests/varmod-to-separator.exp index c6e8ce98a21a..3f8f1b2a11eb 100644 --- a/contrib/bmake/unit-tests/varmod-to-separator.exp +++ b/contrib/bmake/unit-tests/varmod-to-separator.exp @@ -1,19 +1,19 @@ -make: "varmod-to-separator.mk" line 107: Invalid character number: 400:tu} +make: "varmod-to-separator.mk" line 107: Invalid character number at "400:tu}" make: "varmod-to-separator.mk" line 107: Malformed conditional (${WORDS:[1..3]:ts\400:tu}) -make: "varmod-to-separator.mk" line 121: Invalid character number: 100:tu} +make: "varmod-to-separator.mk" line 121: Invalid character number at "100:tu}" make: "varmod-to-separator.mk" line 121: Malformed conditional (${WORDS:[1..3]:ts\x100:tu}) make: Bad modifier ":ts\-300" for variable "WORDS" make: "varmod-to-separator.mk" line 128: Malformed conditional (${WORDS:[1..3]:ts\-300:tu}) make: Bad modifier ":ts\8" for variable "1 2 3" make: "varmod-to-separator.mk" line 136: Malformed conditional (${1 2 3:L:ts\8:tu}) make: Bad modifier ":ts\100L" for variable "1 2 3" make: "varmod-to-separator.mk" line 143: Malformed conditional (${1 2 3:L:ts\100L}) make: Bad modifier ":ts\x40g" for variable "1 2 3" make: "varmod-to-separator.mk" line 150: Malformed conditional (${1 2 3:L:ts\x40g}) make: Bad modifier ":tx" for variable "WORDS" make: "varmod-to-separator.mk" line 158: Malformed conditional (${WORDS:tx} != "anything") make: Bad modifier ":t\X" for variable "WORDS" make: "varmod-to-separator.mk" line 165: Malformed conditional (${WORDS:t\X} != "anything") make: Fatal errors encountered -- cannot continue make: stopped in unit-tests exit status 1 diff --git a/contrib/bmake/unit-tests/varmod-unique.mk b/contrib/bmake/unit-tests/varmod-unique.mk index 04d04a575af1..7fef35b69211 100644 --- a/contrib/bmake/unit-tests/varmod-unique.mk +++ b/contrib/bmake/unit-tests/varmod-unique.mk @@ -1,47 +1,46 @@ -# $NetBSD: varmod-unique.mk,v 1.5 2021/05/30 20:26:41 rillig Exp $ +# $NetBSD: varmod-unique.mk,v 1.6 2021/12/05 22:37:58 rillig Exp $ # # Tests for the :u variable modifier, which discards adjacent duplicate # words. -.if ${:U1 2 1:u} != "1 2 1" -. warning The :u modifier only merges _adjacent_ duplicate words. +.if ${1 2 1:L:u} != "1 2 1" +. warning The modifier ':u' only merges _adjacent_ duplicate words. .endif -.if ${:U1 2 2 3:u} != "1 2 3" -. warning The :u modifier must merge adjacent duplicate words. +.if ${1 2 2 3:L:u} != "1 2 3" +. warning The modifier ':u' must merge adjacent duplicate words. .endif -.if ${:U:u} != "" -. warning The :u modifier must do nothing with an empty word list. +.if ${:L:u} != "" +. warning The modifier ':u' must do nothing with an empty word list. .endif -.if ${:U :u} != "" +.if ${ :L:u} != "" . warning The modifier ':u' must normalize the whitespace. .endif -.if ${:Uword:u} != "word" -. warning The :u modifier must do nothing with a single-element word list. +.if ${word:L:u} != "word" +. warning The modifier ':u' must do nothing with a single-element word list. .endif -.if ${:U word :u} != "word" +.if ${ word :L:u} != "word" . warning The modifier ':u' must normalize the whitespace. .endif -.if ${:U1 1 1 1 1 1 1 1:u} != "1" -. warning The :u modifier must merge _all_ adjacent duplicate words. +.if ${1 1 1 1 1 1 1 1:L:u} != "1" +. warning The modifier ':u' must merge _all_ adjacent duplicate words. .endif -.if ${:U 1 2 1 1 :u} != "1 2 1" -. warning The :u modifier must normalize whitespace between the words. +.if ${ 1 2 1 1 :L:u} != "1 2 1" +. warning The modifier ':u' must normalize whitespace between the words. .endif -.if ${:U1 1 1 1 2:u} != "1 2" +.if ${1 1 1 1 2:L:u} != "1 2" . warning Duplicate words at the beginning must be merged. .endif -.if ${:U1 2 2 2 2:u} != "1 2" +.if ${1 2 2 2 2:L:u} != "1 2" . warning Duplicate words at the end must be merged. .endif all: - @:; diff --git a/contrib/bmake/unit-tests/varname-dot-make-save_dollars.mk b/contrib/bmake/unit-tests/varname-dot-make-save_dollars.mk index 97f37a646d2d..31f228c220b2 100644 --- a/contrib/bmake/unit-tests/varname-dot-make-save_dollars.mk +++ b/contrib/bmake/unit-tests/varname-dot-make-save_dollars.mk @@ -1,8 +1,130 @@ -# $NetBSD: varname-dot-make-save_dollars.mk,v 1.2 2020/08/16 14:25:16 rillig Exp $ +# $NetBSD: varname-dot-make-save_dollars.mk,v 1.7 2021/12/03 18:43:52 rillig Exp $ # -# Tests for the special .MAKE.SAVE_DOLLARS variable. +# Tests for the special .MAKE.SAVE_DOLLARS variable, which controls whether +# the assignment operator ':=' converts '$$' to a single '$' or keeps it +# as-is. +# +# See also: +# var-op-expand.mk for ':=' in general +# varmisc.mk for parsing the boolean values + +# Initially, the variable .MAKE.SAVE_DOLLARS is undefined. At this point the +# behavior of the assignment operator ':=' depends. NetBSD's usr.bin/make +# preserves the '$$' as-is, while the bmake distribution replaces '$$' with +# '$'. +.if ${.MAKE.SAVE_DOLLARS:Uundefined} != "undefined" +. error +.endif + + +# When dollars are preserved, this setting not only applies to literal +# dollars, but also to those that come indirectly from other expressions. +DOLLARS= $$$$$$$$ +.MAKE.SAVE_DOLLARS= yes +VAR:= ${DOLLARS} +# The reduction from 8 '$' to 4 '$' happens when ${VAR} is evaluated in the +# condition; .MAKE.SAVE_DOLLARS only applies at the moment where the +# assignment is performed using ':='. +.if ${VAR} != "\$\$\$\$" +. error +.endif + +# When dollars are preserved, this setting not only applies to literal +# dollars, but also to those that come indirectly from other expressions. +DOLLARS= $$$$$$$$ +.MAKE.SAVE_DOLLARS= no +VAR:= ${DOLLARS} +.if ${VAR} != "\$\$" +. error +.endif + +# The 'yes' preserves the dollars from the literal. +.MAKE.SAVE_DOLLARS= yes +VAR:= $$$$$$$$ +.if ${VAR} != "\$\$\$\$" +. error +.endif + +# The 'no' converts each '$$' to '$'. +.MAKE.SAVE_DOLLARS= no +VAR:= $$$$$$$$ +.if ${VAR} != "\$\$" +. error +.endif + +# It's even possible to change the dollar interpretation in the middle of +# evaluating an expression, but there is no practical need for it. +.MAKE.SAVE_DOLLARS= no +VAR:= $$$$-${.MAKE.SAVE_DOLLARS::=yes}-$$$$ +.if ${VAR} != "\$--\$\$" +. error +.endif + +# The '$' from the ':U' expressions do not appear as literal '$$' to the +# parser (no matter whether directly or indirectly), they only appear as '$$' +# in the value of an expression, therefore .MAKE.SAVE_DOLLARS doesn't apply +# here. +.MAKE.SAVE_DOLLARS= no +VAR:= ${:U\$\$\$\$}-${.MAKE.SAVE_DOLLARS::=yes}-${:U\$\$\$\$} +.if ${VAR} != "\$\$--\$\$" +. error +.endif + +# Undefining .MAKE.SAVE_DOLLARS does not have any effect, in particular it +# does not restore the default behavior. +.MAKE.SAVE_DOLLARS= no +.undef .MAKE.SAVE_DOLLARS +VAR:= $$$$$$$$ +.if ${VAR} != "\$\$" +. error +.endif + +# Undefining .MAKE.SAVE_DOLLARS does not have any effect, in particular it +# does not restore the default behavior. +.MAKE.SAVE_DOLLARS= yes +.undef .MAKE.SAVE_DOLLARS +VAR:= $$$$$$$$ +.if ${VAR} != "\$\$\$\$" +. error +.endif + +# The variable '.MAKE.SAVE_DOLLARS' not only affects literal '$$' on the +# right-hand side of the assignment operator ':=', it also affects dollars +# in indirect expressions. +# +# In this example, it affects the command in CMD itself, not the result of +# running that command. +.MAKE.SAVE_DOLLARS= no +CMD= echo '$$$$$$$$' +VAR:= ${CMD:sh} +.if ${VAR} != "\$\$" +. error +.endif + +.MAKE.SAVE_DOLLARS= yes +CMD= echo '$$$$$$$$' +VAR:= ${CMD:sh} +.if ${VAR} != "\$\$\$\$" +. error +.endif + + +# In the modifier ':@var@body@', .MAKE.SAVE_DOLLARS does not affect the body. +# In both cases, each '$$' is replaced with a single '$', no matter whether +# directly or indirectly via another expression. +.MAKE.SAVE_DOLLARS= no +DOLLARS= $$$$$$$$ +VAR:= ${word:L:@word@$$$$$$$$-${DOLLARS}@} +.if ${VAR} != "\$\$-\$\$" +. error +.endif + +.MAKE.SAVE_DOLLARS= yes +DOLLARS= $$$$$$$$ +VAR:= ${word:L:@word@$$$$$$$$-${DOLLARS}@} +.if ${VAR} != "\$\$-\$\$" +. error +.endif -# TODO: Implementation all: - @:; diff --git a/contrib/bmake/unit-tests/varname-dot-suffixes.exp b/contrib/bmake/unit-tests/varname-dot-suffixes.exp new file mode 100644 index 000000000000..753ce20d9fa8 --- /dev/null +++ b/contrib/bmake/unit-tests/varname-dot-suffixes.exp @@ -0,0 +1,39 @@ +Global:delete .SUFFIXES (not found) +Global: .MAKEFLAGS = -r -k -d v -d +Global: .MAKEFLAGS = -r -k -d v -d 0 +Global: .SUFFIXES = set ignored (read-only) +Global: .SUFFIXES = append ignored (read-only) +Global: _ = +Var_Parse: ${.SUFFIXES::=assign} (eval-keep-dollar-and-undefined) +Evaluating modifier ${.SUFFIXES::...} on value ".c .o .1 .err .tar.gz" (eval-keep-dollar-and-undefined, regular) +Modifier part: "assign" +Global: .SUFFIXES = assign ignored (read-only) +Result of ${.SUFFIXES::=assign} is "" (eval-keep-dollar-and-undefined, regular) +Global: _ = +Var_Parse: ${preserve:L:_=.SUFFIXES} (eval-keep-dollar-and-undefined) +Evaluating modifier ${preserve:L} on value "" (eval-keep-dollar-and-undefined, undefined) +Result of ${preserve:L} is "preserve" (eval-keep-dollar-and-undefined, defined) +Evaluating modifier ${preserve:_...} on value "preserve" (eval-keep-dollar-and-undefined, defined) +Global: .SUFFIXES = preserve ignored (read-only) +Result of ${preserve:_=.SUFFIXES} is "preserve" (eval-keep-dollar-and-undefined, defined) +Global: _ = preserve +Global: .MAKEFLAGS = -r -k -d v -d 0 -d v -d +Global: .MAKEFLAGS = -r -k -d v -d 0 -d v -d 0 +Var_Parse: ${1 2:L:@.SUFFIXES@${.SUFFIXES}@} != ".c .o .1 .err .tar.gz .c .o .1 .err .tar.gz" (eval-defined) +Evaluating modifier ${1 2:L} on value "" (eval-defined, undefined) +Result of ${1 2:L} is "1 2" (eval-defined, defined) +Evaluating modifier ${1 2:@...} on value "1 2" (eval-defined, defined) +Modifier part: ".SUFFIXES" +Modifier part: "${.SUFFIXES}" +ModifyWords: split "1 2" into 2 words +Command: .SUFFIXES = 1 ignored (read-only) +Var_Parse: ${.SUFFIXES} (eval-defined) +ModifyWord_Loop: in "1", replace ".SUFFIXES" with "${.SUFFIXES}" to ".c .o .1 .err .tar.gz" +Command: .SUFFIXES = 2 ignored (read-only) +Var_Parse: ${.SUFFIXES} (eval-defined) +ModifyWord_Loop: in "2", replace ".SUFFIXES" with "${.SUFFIXES}" to ".c .o .1 .err .tar.gz" +Command:delete .SUFFIXES (not found) +Result of ${1 2:@.SUFFIXES@${.SUFFIXES}@} is ".c .o .1 .err .tar.gz .c .o .1 .err .tar.gz" (eval-defined, defined) +Global: .MAKEFLAGS = -r -k -d v -d 0 -d v -d 0 -d v -d +Global: .MAKEFLAGS = -r -k -d v -d 0 -d v -d 0 -d v -d 0 +exit status 0 diff --git a/contrib/bmake/unit-tests/varname-dot-suffixes.mk b/contrib/bmake/unit-tests/varname-dot-suffixes.mk new file mode 100644 index 000000000000..de8034a172cc --- /dev/null +++ b/contrib/bmake/unit-tests/varname-dot-suffixes.mk @@ -0,0 +1,104 @@ +# $NetBSD: varname-dot-suffixes.mk,v 1.1 2021/12/12 22:16:48 rillig Exp $ +# +# Tests for the special "variable" .SUFFIXES, which lists the suffixes that +# have been registered for use in suffix transformation rules. Suffixes are +# listed even if there is no actual transformation rule that uses them. +# +# The name '.SUFFIXES' does not refer to a real variable, instead it can be +# used as a starting "variable name" for expressions like ${.SUFFIXES} or +# ${.SUFFIXES:M*o}. + +# In the beginning, there are no suffix rules, the expression is thus empty. +.if ${.SUFFIXES} != "" +.endif + +# There is no actual variable named '.SUFFIXES', it is all made up. +.if defined(.SUFFIXES) +. error +.endif + +# The suffixes list is still empty, and so is the "variable" '.SUFFIXES'. +.if !empty(.SUFFIXES) +. error +.endif + +.SUFFIXES: .c .o .1 .err + +# The suffixes are listed in declaration order. +.if ${.SUFFIXES} != ".c .o .1 .err" +. error +.endif + +# There is still no actual variable named '.SUFFIXES', it is all made up. +.if defined(.SUFFIXES) +. error +.endif + +# Now the suffixes list is not empty anymore. It may seem strange that there +# is no variable named '.SUFFIXES' but evaluating '${.SUFFIXES}' nevertheless +# returns something. For all practical use cases, it's good enough though. +.if empty(.SUFFIXES) +. error +.endif + +.SUFFIXES: .tar.gz + +# Changes to the suffixes list are reflected immediately. +.if ${.SUFFIXES} != ".c .o .1 .err .tar.gz" +. error +.endif + +# Deleting .SUFFIXES has no effect since there is no actual variable of that +# name. +.MAKEFLAGS: -dv +# expect: Global:delete .SUFFIXES (not found) +.undef .SUFFIXES +.MAKEFLAGS: -d0 +.if ${.SUFFIXES} != ".c .o .1 .err .tar.gz" +. error +.endif + +# The list of suffixes can only be modified using dependency declarations, any +# attempt at setting the variable named '.SUFFIXES' is rejected. +.MAKEFLAGS: -dv +# expect: Global: .SUFFIXES = set ignored (read-only) +.SUFFIXES= set +# expect: Global: .SUFFIXES = append ignored (read-only) +.SUFFIXES+= append +# expect: Global: .SUFFIXES = assign ignored (read-only) +_:= ${.SUFFIXES::=assign} +# expect: Command: .SUFFIXES = preserve ignored (read-only) +_:= ${preserve:L:_=.SUFFIXES} +.MAKEFLAGS: -d0 + +# Using the name '.SUFFIXES' in a .for loop looks strange because these +# variable names are typically in singular form, and .for loops do not use +# real variables either, they are made up as well, see directive-for.mk. The +# replacement mechanism for the iteration variables takes precedence. +.for .SUFFIXES in .c .o +. if ${.SUFFIXES} != ".c" && ${.SUFFIXES} != ".o" +. error +. endif +.endfor + +# After the .for loop, the expression '${.SUFFIXES}' refers to the list of +# suffixes again. +.if ${.SUFFIXES} != ".c .o .1 .err .tar.gz" +. error +.endif + +# Using the name '.SUFFIXES' in the modifier ':@var@body@' does not create an +# actual variable either. Like in the .for loop, choosing the name +# '.SUFFIXES' for the iteration variable is unusual. In ODE Make, the +# convention for these iteration variables is to have dots at both ends, so +# the name would be '.SUFFIXES.', furthermore the name of the iteration +# variable is typically in singular form. +.MAKEFLAGS: -dv +# expect: Command: .SUFFIXES = 1 ignored (read-only) +# expect: Command: .SUFFIXES = 2 ignored (read-only) +.if ${1 2:L:@.SUFFIXES@${.SUFFIXES}@} != ".c .o .1 .err .tar.gz .c .o .1 .err .tar.gz" +. error +.endif +.MAKEFLAGS: -d0 + +all: diff --git a/contrib/bmake/unit-tests/varname-empty.exp b/contrib/bmake/unit-tests/varname-empty.exp index ec225c6973c8..75a3f4151a8c 100644 --- a/contrib/bmake/unit-tests/varname-empty.exp +++ b/contrib/bmake/unit-tests/varname-empty.exp @@ -1,27 +1,23 @@ Var_SetExpand: variable name "${:U}" expands to empty string, with value "cmdline-u" - ignored Var_SetExpand: variable name "" expands to empty string, with value "cmdline-plain" - ignored Global: .CURDIR = Var_Parse: ${MAKE_OBJDIR_CHECK_WRITABLE} (eval) -Global: .OBJDIR = -Global:delete .PATH (not found) -Global: .PATH = . -Global: .PATH = . Global: .TARGETS = Internal: MAKEFILE = varname-empty.mk Global: .MAKE.MAKEFILES = varname-empty.mk Global: .PARSEFILE = varname-empty.mk Global:delete .INCLUDEDFROMDIR (not found) Global:delete .INCLUDEDFROMFILE (not found) Var_SetExpand: variable name "" expands to empty string, with value "default" - ignored Var_SetExpand: variable name "" expands to empty string, with value "assigned" - ignored SetVar: variable name is empty - ignored Var_SetExpand: variable name "" expands to empty string, with value "" - ignored Var_SetExpand: variable name "" expands to empty string, with value "subst" - ignored Var_SetExpand: variable name "" expands to empty string, with value "shell-output" - ignored Var_SetExpand: variable name "${:U}" expands to empty string, with value "assigned indirectly" - ignored Var_AppendExpand: variable name "${:U}" expands to empty string, with value "appended indirectly" - ignored Global: .MAKEFLAGS = -r -d v -d Global: .MAKEFLAGS = -r -d v -d 0 out: fallback out: 1 2 3 exit status 0 diff --git a/contrib/bmake/util.c b/contrib/bmake/util.c index 571d187c5fe1..dab18e2ece53 100644 --- a/contrib/bmake/util.c +++ b/contrib/bmake/util.c @@ -1,588 +1,668 @@ /* $NetBSD: util.c,v 1.76 2021/02/03 08:00:36 rillig Exp $ */ /* * Missing stuff from OS's * - * $Id: util.c,v 1.46 2021/02/05 20:02:29 sjg Exp $ + * $Id: util.c,v 1.49 2021/10/14 19:26:52 sjg Exp $ */ #include #include #include #include #include "make.h" MAKE_RCSID("$NetBSD: util.c,v 1.76 2021/02/03 08:00:36 rillig Exp $"); #if !defined(MAKE_NATIVE) && !defined(HAVE_STRERROR) extern int errno, sys_nerr; extern char *sys_errlist[]; char * strerror(int e) { static char buf[100]; if (e < 0 || e >= sys_nerr) { snprintf(buf, sizeof buf, "Unknown error %d", e); return buf; } else return sys_errlist[e]; } #endif #if !defined(HAVE_GETENV) || !defined(HAVE_SETENV) || !defined(HAVE_UNSETENV) extern char **environ; static char * findenv(const char *name, int *offset) { size_t i, len; char *p, *q; len = strlen(name); for (i = 0; (q = environ[i]); i++) { p = strchr(q, '='); if (p == NULL || p - q != len) continue; if (strncmp(name, q, len) == 0) { *offset = i; return q + len + 1; } } *offset = i; return NULL; } char * getenv(const char *name) { int offset; return findenv(name, &offset); } int unsetenv(const char *name) { char **p; int offset; if (name == NULL || *name == '\0' || strchr(name, '=') != NULL) { errno = EINVAL; return -1; } while (findenv(name, &offset)) { /* if set multiple times */ for (p = &environ[offset];; p++) if (!(*p = *(p + 1))) break; } return 0; } int setenv(const char *name, const char *value, int rewrite) { char *c, **newenv; const char *cc; size_t l_value, size; int offset; if (name == NULL || value == NULL) { errno = EINVAL; return -1; } if (*value == '=') /* no `=' in value */ value++; l_value = strlen(value); /* find if already exists */ if ((c = findenv(name, &offset))) { if (!rewrite) return 0; if (strlen(c) >= l_value) /* old larger; copy over */ goto copy; } else { /* create new slot */ size = sizeof(char *) * (offset + 2); if (savedEnv == environ) { /* just increase size */ if ((newenv = realloc(savedEnv, size)) == NULL) return -1; savedEnv = newenv; } else { /* get new space */ /* * We don't free here because we don't know if * the first allocation is valid on all OS's */ if ((savedEnv = malloc(size)) == NULL) return -1; (void)memcpy(savedEnv, environ, size - sizeof(char *)); } environ = savedEnv; environ[offset + 1] = NULL; } for (cc = name; *cc && *cc != '='; cc++) /* no `=' in name */ continue; size = cc - name; /* name + `=' + value */ if ((environ[offset] = malloc(size + l_value + 2)) == NULL) return -1; c = environ[offset]; (void)memcpy(c, name, size); c += size; *c++ = '='; copy: (void)memcpy(c, value, l_value + 1); return 0; } #ifdef TEST int main(int argc, char *argv[]) { setenv(argv[1], argv[2], 0); printf("%s\n", getenv(argv[1])); unsetenv(argv[1]); printf("%s\n", getenv(argv[1])); return 0; } #endif #endif #if defined(__hpux__) || defined(__hpux) /* * strrcpy(): * Like strcpy, going backwards and returning the new pointer */ static char * strrcpy(char *ptr, char *str) { int len = strlen(str); while (len != 0) *--ptr = str[--len]; return ptr; } /* end strrcpy */ char *sys_siglist[] = { "Signal 0", "Hangup", /* SIGHUP */ "Interrupt", /* SIGINT */ "Quit", /* SIGQUIT */ "Illegal instruction", /* SIGILL */ "Trace/BPT trap", /* SIGTRAP */ "IOT trap", /* SIGIOT */ "EMT trap", /* SIGEMT */ "Floating point exception", /* SIGFPE */ "Killed", /* SIGKILL */ "Bus error", /* SIGBUS */ "Segmentation fault", /* SIGSEGV */ "Bad system call", /* SIGSYS */ "Broken pipe", /* SIGPIPE */ "Alarm clock", /* SIGALRM */ "Terminated", /* SIGTERM */ "User defined signal 1", /* SIGUSR1 */ "User defined signal 2", /* SIGUSR2 */ "Child exited", /* SIGCLD */ "Power-fail restart", /* SIGPWR */ "Virtual timer expired", /* SIGVTALRM */ "Profiling timer expired", /* SIGPROF */ "I/O possible", /* SIGIO */ "Window size changes", /* SIGWINDOW */ "Stopped (signal)", /* SIGSTOP */ "Stopped", /* SIGTSTP */ "Continued", /* SIGCONT */ "Stopped (tty input)", /* SIGTTIN */ "Stopped (tty output)", /* SIGTTOU */ "Urgent I/O condition", /* SIGURG */ "Remote lock lost (NFS)", /* SIGLOST */ "Signal 31", /* reserved */ "DIL signal" /* SIGDIL */ }; #endif /* __hpux__ || __hpux */ #if defined(__hpux__) || defined(__hpux) #include #include #include #include #include #include #include int killpg(int pid, int sig) { return kill(-pid, sig); } #if !defined(BSD) && !defined(d_fileno) # define d_fileno d_ino #endif #ifndef DEV_DEV_COMPARE # define DEV_DEV_COMPARE(a, b) ((a) == (b)) #endif #define ISDOT(c) ((c)[0] == '.' && (((c)[1] == '\0') || ((c)[1] == '/'))) #define ISDOTDOT(c) ((c)[0] == '.' && ISDOT(&((c)[1]))) char * getwd(char *pathname) { DIR *dp; struct dirent *d; extern int errno; struct stat st_root, st_cur, st_next, st_dotdot; char pathbuf[MAXPATHLEN], nextpathbuf[MAXPATHLEN * 2]; char *pathptr, *nextpathptr, *cur_name_add; /* find the inode of root */ if (stat("/", &st_root) == -1) { (void)sprintf(pathname, "getwd: Cannot stat \"/\" (%s)", strerror(errno)); return NULL; } pathbuf[MAXPATHLEN - 1] = '\0'; pathptr = &pathbuf[MAXPATHLEN - 1]; nextpathbuf[MAXPATHLEN - 1] = '\0'; cur_name_add = nextpathptr = &nextpathbuf[MAXPATHLEN - 1]; /* find the inode of the current directory */ if (lstat(".", &st_cur) == -1) { (void)sprintf(pathname, "getwd: Cannot stat \".\" (%s)", strerror(errno)); return NULL; } nextpathptr = strrcpy(nextpathptr, "../"); /* Descend to root */ for (;;) { /* look if we found root yet */ if (st_cur.st_ino == st_root.st_ino && DEV_DEV_COMPARE(st_cur.st_dev, st_root.st_dev)) { (void)strcpy(pathname, *pathptr != '/' ? "/" : pathptr); return pathname; } /* open the parent directory */ if (stat(nextpathptr, &st_dotdot) == -1) { (void)sprintf(pathname, "getwd: Cannot stat directory \"%s\" (%s)", nextpathptr, strerror(errno)); return NULL; } if ((dp = opendir(nextpathptr)) == NULL) { (void)sprintf(pathname, "getwd: Cannot open directory \"%s\" (%s)", nextpathptr, strerror(errno)); return NULL; } /* look in the parent for the entry with the same inode */ if (DEV_DEV_COMPARE(st_dotdot.st_dev, st_cur.st_dev)) { /* Parent has same device. No need to stat every member */ for (d = readdir(dp); d != NULL; d = readdir(dp)) if (d->d_fileno == st_cur.st_ino) break; } else { /* * Parent has a different device. This is a mount point so we * need to stat every member */ for (d = readdir(dp); d != NULL; d = readdir(dp)) { if (ISDOT(d->d_name) || ISDOTDOT(d->d_name)) continue; (void)strcpy(cur_name_add, d->d_name); if (lstat(nextpathptr, &st_next) == -1) { (void)sprintf(pathname, "getwd: Cannot stat \"%s\" (%s)", d->d_name, strerror(errno)); (void)closedir(dp); return NULL; } /* check if we found it yet */ if (st_next.st_ino == st_cur.st_ino && DEV_DEV_COMPARE(st_next.st_dev, st_cur.st_dev)) break; } } if (d == NULL) { (void)sprintf(pathname, "getwd: Cannot find \".\" in \"..\""); (void)closedir(dp); return NULL; } st_cur = st_dotdot; pathptr = strrcpy(pathptr, d->d_name); pathptr = strrcpy(pathptr, "/"); nextpathptr = strrcpy(nextpathptr, "../"); (void)closedir(dp); *cur_name_add = '\0'; } } /* end getwd */ #endif /* __hpux */ #if !defined(HAVE_GETCWD) char * getcwd(path, sz) char *path; int sz; { return getwd(path); } #endif +#if !defined(HAVE_SIGACTION) +#include "sigact.h" +#endif + /* force posix signals */ SignalProc bmake_signal(int s, SignalProc a) { struct sigaction sa, osa; sa.sa_handler = a; sigemptyset(&sa.sa_mask); sa.sa_flags = SA_RESTART; if (sigaction(s, &sa, &osa) == -1) return SIG_ERR; else return osa.sa_handler; } #if !defined(HAVE_VSNPRINTF) || !defined(HAVE_VASPRINTF) #include #endif #if !defined(HAVE_VSNPRINTF) #if !defined(__osf__) #ifdef _IOSTRG #define STRFLAG (_IOSTRG|_IOWRT) /* no _IOWRT: avoid stdio bug */ #else #if 0 #define STRFLAG (_IOREAD) /* XXX: Assume svr4 stdio */ #endif #endif /* _IOSTRG */ #endif /* __osf__ */ int vsnprintf(char *s, size_t n, const char *fmt, va_list args) { #ifdef STRFLAG FILE fakebuf; fakebuf._flag = STRFLAG; /* * Some os's are char * _ptr, others are unsigned char *_ptr... * We cast to void * to make everyone happy. */ fakebuf._ptr = (void *)s; fakebuf._cnt = n - 1; fakebuf._file = -1; _doprnt(fmt, args, &fakebuf); fakebuf._cnt++; putc('\0', &fakebuf); if (fakebuf._cnt < 0) fakebuf._cnt = 0; return n - fakebuf._cnt - 1; #else #ifndef _PATH_DEVNULL # define _PATH_DEVNULL "/dev/null" #endif /* * Rats... we don't want to clobber anything... * do a printf to /dev/null to see how much space we need. */ static FILE *nullfp; int need = 0; /* XXX what's a useful error return? */ if (!nullfp) nullfp = fopen(_PATH_DEVNULL, "w"); if (nullfp) { need = vfprintf(nullfp, fmt, args); if (need < n) (void)vsprintf(s, fmt, args); } return need; #endif } #endif #if !defined(HAVE_SNPRINTF) int snprintf(char *s, size_t n, const char *fmt, ...) { va_list ap; int rv; va_start(ap, fmt); rv = vsnprintf(s, n, fmt, ap); va_end(ap); return rv; } #endif #if !defined(HAVE_STRFTIME) size_t strftime(char *buf, size_t len, const char *fmt, const struct tm *tm) { static char months[][4] = { "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" }; size_t s; char *b = buf; while (*fmt) { if (len == 0) return buf - b; if (*fmt != '%') { *buf++ = *fmt++; len--; continue; } switch (*fmt++) { case '%': *buf++ = '%'; len--; if (len == 0) return buf - b; /*FALLTHROUGH*/ case '\0': *buf = '%'; s = 1; break; case 'k': s = snprintf(buf, len, "%d", tm->tm_hour); break; case 'M': s = snprintf(buf, len, "%02d", tm->tm_min); break; case 'S': s = snprintf(buf, len, "%02d", tm->tm_sec); break; case 'b': if (tm->tm_mon >= 12) return buf - b; s = snprintf(buf, len, "%s", months[tm->tm_mon]); break; case 'd': s = snprintf(buf, len, "%02d", tm->tm_mday); break; case 'Y': s = snprintf(buf, len, "%d", 1900 + tm->tm_year); break; default: s = snprintf(buf, len, "Unsupported format %c", fmt[-1]); break; } buf += s; len -= s; } return buf - b; } #endif #if !defined(HAVE_KILLPG) #if !defined(__hpux__) && !defined(__hpux) int killpg(int pid, int sig) { return kill(-pid, sig); } #endif #endif #if !defined(HAVE_WARNX) static void vwarnx(const char *fmt, va_list args) { fprintf(stderr, "%s: ", progname); if ((fmt)) { vfprintf(stderr, fmt, args); fprintf(stderr, ": "); } } #endif #if !defined(HAVE_WARN) static void vwarn(const char *fmt, va_list args) { vwarnx(fmt, args); fprintf(stderr, "%s\n", strerror(errno)); } #endif #if !defined(HAVE_ERR) static void verr(int eval, const char *fmt, va_list args) { vwarn(fmt, args); exit(eval); } #endif #if !defined(HAVE_ERRX) static void verrx(int eval, const char *fmt, va_list args) { vwarnx(fmt, args); exit(eval); } #endif #if !defined(HAVE_ERR) void err(int eval, const char *fmt, ...) { va_list ap; va_start(ap, fmt); verr(eval, fmt, ap); va_end(ap); } #endif #if !defined(HAVE_ERRX) void errx(int eval, const char *fmt, ...) { va_list ap; va_start(ap, fmt); verrx(eval, fmt, ap); va_end(ap); } #endif #if !defined(HAVE_WARN) void warn(const char *fmt, ...) { va_list ap; va_start(ap, fmt); vwarn(fmt, ap); va_end(ap); } #endif #if !defined(HAVE_WARNX) void warnx(const char *fmt, ...) { va_list ap; va_start(ap, fmt); vwarnx(fmt, ap); va_end(ap); } #endif + +#ifdef HAVE_INTTYPES_H +#include +#elif defined(HAVE_STDINT_H) +#include +#endif +#ifdef HAVE_LIMITS_H +#include +#endif + +#ifndef NUM_TYPE +# ifdef HAVE_LONG_LONG_INT +# define NUM_TYPE long long +# elif defined(_INT64_T_DECLARED) || defined(int64_t) +# define NUM_TYPE int64_t +# endif +#endif + +#ifdef NUM_TYPE +#if !defined(HAVE_STRTOLL) +#define BCS_ONLY +#define _FUNCNAME strtoll +#define __INT NUM_TYPE +#undef __INT_MIN +#undef __INT_MAX +#ifdef LLONG_MAX +# define __INT_MIN LLONG_MIN +# define __INT_MAX LLONG_MAX +#elif defined(INT64_MAX) +# define __INT_MIN INT64_MIN +# define __INT_MAX INT64_MAX +#endif +#ifndef _DIAGASSERT +# define _DIAGASSERT(e) +#endif +#ifndef __UNCONST +# define __UNCONST(a) ((void *)(unsigned long)(const void *)(a)) +#endif +#include "_strtol.h" +#endif + +#endif + +#if !defined(HAVE_STRTOL) +#define BCS_ONLY +#define _FUNCNAME strtol +#define __INT long +#undef __INT_MIN +#undef __INT_MAX +#define __INT_MIN LONG_MIN +#define __INT_MAX LONG_MAX +#ifndef _DIAGASSERT +# define _DIAGASSERT(e) +#endif +#ifndef __UNCONST +# define __UNCONST(a) ((void *)(unsigned long)(const void *)(a)) +#endif +#include "_strtol.h" +#endif + +#if !defined(HAVE_STRTOUL) +#define BCS_ONLY +#define _FUNCNAME strtoul +#define __INT unsigned long +#undef __INT_MIN +#undef __INT_MAX +#define __INT_MIN 0 +#define __INT_MAX ULONG_MAX +#ifndef _DIAGASSERT +# define _DIAGASSERT(e) +#endif +#ifndef __UNCONST +# define __UNCONST(a) ((void *)(unsigned long)(const void *)(a)) +#endif +#include "_strtol.h" +#endif diff --git a/contrib/bmake/var.c b/contrib/bmake/var.c index 6e5148bba968..4542a2f9a2ed 100644 --- a/contrib/bmake/var.c +++ b/contrib/bmake/var.c @@ -1,4760 +1,4877 @@ -/* $NetBSD: var.c,v 1.934 2021/06/21 08:40:44 rillig Exp $ */ +/* $NetBSD: var.c,v 1.973 2021/12/12 20:45:48 sjg Exp $ */ /* * Copyright (c) 1988, 1989, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Copyright (c) 1989 by Berkeley Softworks * All rights reserved. * * This code is derived from software contributed to Berkeley by * Adam de Boor. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * Handling of variables and the expressions formed from them. * * Variables are set using lines of the form VAR=value. Both the variable * name and the value can contain references to other variables, by using * expressions like ${VAR}, ${VAR:Modifiers}, ${${VARNAME}} or ${VAR:${MODS}}. * * Interface: * Var_Init Initialize this module. * * Var_End Clean up the module. * * Var_Set * Var_SetExpand * Set the value of the variable, creating it if * necessary. * * Var_Append * Var_AppendExpand * Append more characters to the variable, creating it if * necessary. A space is placed between the old value and * the new one. * * Var_Exists * Var_ExistsExpand * See if a variable exists. * * Var_Value Return the unexpanded value of a variable, or NULL if * the variable is undefined. * * Var_Subst Substitute all variable expressions in a string. * * Var_Parse Parse a variable expression such as ${VAR:Mpattern}. * * Var_Delete * Var_DeleteExpand * Delete a variable. * * Var_ReexportVars * Export some or even all variables to the environment * of this process and its child processes. * * Var_Export Export the variable to the environment of this process * and its child processes. * * Var_UnExport Don't export the variable anymore. * * Debugging: * Var_Stats Print out hashing statistics if in -dh mode. * * Var_Dump Print out all variables defined in the given scope. * * XXX: There's a lot of almost duplicate code in these functions that only * differs in subtle details that are not mentioned in the manual page. */ #include #include #ifndef NO_REGEX #include #endif #include "make.h" #include #ifdef HAVE_INTTYPES_H #include #elif defined(HAVE_STDINT_H) #include #endif #ifdef HAVE_LIMITS_H #include #endif #include #include "dir.h" #include "job.h" #include "metachar.h" /* "@(#)var.c 8.3 (Berkeley) 3/19/94" */ -MAKE_RCSID("$NetBSD: var.c,v 1.934 2021/06/21 08:40:44 rillig Exp $"); +MAKE_RCSID("$NetBSD: var.c,v 1.973 2021/12/12 20:45:48 sjg Exp $"); /* * Variables are defined using one of the VAR=value assignments. Their * value can be queried by expressions such as $V, ${VAR}, or with modifiers * such as ${VAR:S,from,to,g:Q}. * * There are 3 kinds of variables: scope variables, environment variables, * undefined variables. * * Scope variables are stored in a GNode.scope. The only way to undefine * a scope variable is using the .undef directive. In particular, it must * not be possible to undefine a variable during the evaluation of an * expression, or Var.name might point nowhere. * * Environment variables are temporary. They are returned by VarFind, and * after using them, they must be freed using VarFreeEnv. * * Undefined variables occur during evaluation of variable expressions such * as ${UNDEF:Ufallback} in Var_Parse and ApplyModifiers. */ typedef struct Var { /* * The name of the variable, once set, doesn't change anymore. * For scope variables, it aliases the corresponding HashEntry name. * For environment and undefined variables, it is allocated. */ FStr name; /* The unexpanded value of the variable. */ Buffer val; /* The variable came from the command line. */ bool fromCmd: 1; /* * The variable comes from the environment. * These variables are not registered in any GNode, therefore they * must be freed as soon as they are not used anymore. */ bool fromEnv: 1; /* * The variable value cannot be changed anymore, and the variable * cannot be deleted. Any attempts to do so are silently ignored, * they are logged with -dv though. * * See VAR_SET_READONLY. */ bool readOnly: 1; /* * The variable's value is currently being used by Var_Parse or * Var_Subst. This marker is used to avoid endless recursion. */ bool inUse: 1; /* * The variable is exported to the environment, to be used by child * processes. */ bool exported: 1; /* * At the point where this variable was exported, it contained an * unresolved reference to another variable. Before any child * process is started, it needs to be exported again, in the hope * that the referenced variable can then be resolved. */ bool reexport: 1; } Var; /* * Exporting variables is expensive and may leak memory, so skip it if we * can. * * To avoid this, it might be worth encapsulating the environment variables * in a separate data structure called EnvVars. */ typedef enum VarExportedMode { VAR_EXPORTED_NONE, VAR_EXPORTED_SOME, VAR_EXPORTED_ALL } VarExportedMode; typedef enum UnexportWhat { /* Unexport the variables given by name. */ UNEXPORT_NAMED, /* * Unexport all globals previously exported, but keep the environment * inherited from the parent. */ UNEXPORT_ALL, /* * Unexport all globals previously exported and clear the environment * inherited from the parent. */ UNEXPORT_ENV } UnexportWhat; /* Flags for pattern matching in the :S and :C modifiers */ typedef struct PatternFlags { bool subGlobal: 1; /* 'g': replace as often as possible */ bool subOnce: 1; /* '1': replace only once */ bool anchorStart: 1; /* '^': match only at start of word */ bool anchorEnd: 1; /* '$': match only at end of word */ } PatternFlags; /* SepBuf builds a string from words interleaved with separators. */ typedef struct SepBuf { Buffer buf; bool needSep; /* Usually ' ', but see the ':ts' modifier. */ char sep; } SepBuf; /* * This lets us tell if we have replaced the original environ * (which we cannot free). */ char **savedEnv = NULL; /* * Special return value for Var_Parse, indicating a parse error. It may be * caused by an undefined variable, a syntax error in a modifier or * something entirely different. */ char var_Error[] = ""; /* * Special return value for Var_Parse, indicating an undefined variable in * a case where VARE_UNDEFERR is not set. This undefined variable is * typically a dynamic variable such as ${.TARGET}, whose expansion needs to * be deferred until it is defined in an actual target. * * See VARE_EVAL_KEEP_UNDEF. */ static char varUndefined[] = ""; /* * Traditionally this make consumed $$ during := like any other expansion. * Other make's do not, and this make follows straight since 2016-01-09. * * This knob allows controlling the behavior: * false to consume $$ during := assignment. * true to preserve $$ during := assignment. */ #define MAKE_SAVE_DOLLARS ".MAKE.SAVE_DOLLARS" static bool save_dollars = false; /* * A scope collects variable names and their values. * * The main scope is SCOPE_GLOBAL, which contains the variables that are set * in the makefiles. SCOPE_INTERNAL acts as a fallback for SCOPE_GLOBAL and * contains some internal make variables. These internal variables can thus * be overridden, they can also be restored by undefining the overriding * variable. * * SCOPE_CMDLINE contains variables from the command line arguments. These * override variables from SCOPE_GLOBAL. * * There is no scope for environment variables, these are generated on-the-fly * whenever they are referenced. If there were such a scope, each change to * environment variables would have to be reflected in that scope, which may * be simpler or more complex than the current implementation. * * Each target has its own scope, containing the 7 target-local variables * .TARGET, .ALLSRC, etc. No other variables are in these scopes. */ GNode *SCOPE_CMDLINE; GNode *SCOPE_GLOBAL; GNode *SCOPE_INTERNAL; static VarExportedMode var_exportedVars = VAR_EXPORTED_NONE; -static const char *VarEvalMode_Name[] = { +static const char VarEvalMode_Name[][32] = { "parse-only", "eval", "eval-defined", "eval-keep-dollar", "eval-keep-undefined", "eval-keep-dollar-and-undefined", }; static Var * VarNew(FStr name, const char *value, bool fromEnv, bool readOnly) { size_t value_len = strlen(value); Var *var = bmake_malloc(sizeof *var); var->name = name; Buf_InitSize(&var->val, value_len + 1); Buf_AddBytes(&var->val, value, value_len); var->fromCmd = false; var->fromEnv = fromEnv; var->readOnly = readOnly; var->inUse = false; var->exported = false; var->reexport = false; return var; } static Substring CanonicalVarname(Substring name) { if (!(Substring_Length(name) > 0 && name.start[0] == '.')) return name; if (Substring_Equals(name, ".ALLSRC")) return Substring_InitStr(ALLSRC); if (Substring_Equals(name, ".ARCHIVE")) return Substring_InitStr(ARCHIVE); if (Substring_Equals(name, ".IMPSRC")) return Substring_InitStr(IMPSRC); if (Substring_Equals(name, ".MEMBER")) return Substring_InitStr(MEMBER); if (Substring_Equals(name, ".OODATE")) return Substring_InitStr(OODATE); if (Substring_Equals(name, ".PREFIX")) return Substring_InitStr(PREFIX); if (Substring_Equals(name, ".TARGET")) return Substring_InitStr(TARGET); if (Substring_Equals(name, ".SHELL") && shellPath == NULL) Shell_Init(); /* GNU make has an additional alias $^ == ${.ALLSRC}. */ return name; } static Var * GNode_FindVar(GNode *scope, Substring varname, unsigned int hash) { return HashTable_FindValueBySubstringHash(&scope->vars, varname, hash); } /* * Find the variable in the scope, and maybe in other scopes as well. * * Input: * name name to find, is not expanded any further * scope scope in which to look first * elsewhere true to look in other scopes as well * * Results: * The found variable, or NULL if the variable does not exist. * If the variable is an environment variable, it must be freed using * VarFreeEnv after use. */ static Var * VarFindSubstring(Substring name, GNode *scope, bool elsewhere) { Var *var; unsigned int nameHash; /* Replace '.TARGET' with '@', likewise for other local variables. */ name = CanonicalVarname(name); nameHash = Hash_Substring(name); var = GNode_FindVar(scope, name, nameHash); if (!elsewhere) return var; if (var == NULL && scope != SCOPE_CMDLINE) var = GNode_FindVar(SCOPE_CMDLINE, name, nameHash); if (!opts.checkEnvFirst && var == NULL && scope != SCOPE_GLOBAL) { var = GNode_FindVar(SCOPE_GLOBAL, name, nameHash); if (var == NULL && scope != SCOPE_INTERNAL) { /* SCOPE_INTERNAL is subordinate to SCOPE_GLOBAL */ var = GNode_FindVar(SCOPE_INTERNAL, name, nameHash); } } if (var == NULL) { FStr envName; const char *envValue; /* * TODO: try setting an environment variable with the empty * name, which should be technically possible, just to see * how make reacts. All .for loops should be broken then. */ envName = Substring_Str(name); envValue = getenv(envName.str); if (envValue != NULL) return VarNew(envName, envValue, true, false); FStr_Done(&envName); if (opts.checkEnvFirst && scope != SCOPE_GLOBAL) { var = GNode_FindVar(SCOPE_GLOBAL, name, nameHash); if (var == NULL && scope != SCOPE_INTERNAL) var = GNode_FindVar(SCOPE_INTERNAL, name, nameHash); return var; } return NULL; } return var; } /* TODO: Replace these calls with VarFindSubstring, as far as possible. */ static Var * VarFind(const char *name, GNode *scope, bool elsewhere) { return VarFindSubstring(Substring_InitStr(name), scope, elsewhere); } /* If the variable is an environment variable, free it, including its value. */ static void VarFreeEnv(Var *v) { if (!v->fromEnv) return; FStr_Done(&v->name); Buf_Done(&v->val); free(v); } /* Add a new variable of the given name and value to the given scope. */ static Var * VarAdd(const char *name, const char *value, GNode *scope, VarSetFlags flags) { HashEntry *he = HashTable_CreateEntry(&scope->vars, name, NULL); Var *v = VarNew(FStr_InitRefer(/* aliased to */ he->key), value, false, (flags & VAR_SET_READONLY) != 0); HashEntry_Set(he, v); DEBUG3(VAR, "%s: %s = %s\n", scope->name, name, value); return v; } /* * Remove a variable from a scope, freeing all related memory as well. * The variable name is kept as-is, it is not expanded. */ void Var_Delete(GNode *scope, const char *varname) { HashEntry *he = HashTable_FindEntry(&scope->vars, varname); Var *v; if (he == NULL) { DEBUG2(VAR, "%s:delete %s (not found)\n", scope->name, varname); return; } DEBUG2(VAR, "%s:delete %s\n", scope->name, varname); v = he->value; + if (v->inUse) { + Parse_Error(PARSE_FATAL, + "Cannot delete variable \"%s\" while it is used", + v->name.str); + return; + } if (v->exported) unsetenv(v->name.str); if (strcmp(v->name.str, MAKE_EXPORTED) == 0) var_exportedVars = VAR_EXPORTED_NONE; assert(v->name.freeIt == NULL); HashTable_DeleteEntry(&scope->vars, he); Buf_Done(&v->val); free(v); } /* * Remove a variable from a scope, freeing all related memory as well. * The variable name is expanded once. */ void Var_DeleteExpand(GNode *scope, const char *name) { FStr varname = FStr_InitRefer(name); if (strchr(varname.str, '$') != NULL) { char *expanded; (void)Var_Subst(varname.str, SCOPE_GLOBAL, VARE_WANTRES, &expanded); /* TODO: handle errors */ varname = FStr_InitOwn(expanded); } Var_Delete(scope, varname.str); FStr_Done(&varname); } /* * Undefine one or more variables from the global scope. * The argument is expanded exactly once and then split into words. */ void Var_Undef(const char *arg) { VarParseResult vpr; char *expanded; Words varnames; size_t i; if (arg[0] == '\0') { Parse_Error(PARSE_FATAL, "The .undef directive requires an argument"); return; } vpr = Var_Subst(arg, SCOPE_GLOBAL, VARE_WANTRES, &expanded); if (vpr != VPR_OK) { Parse_Error(PARSE_FATAL, "Error in variable names to be undefined"); return; } varnames = Str_Words(expanded, false); if (varnames.len == 1 && varnames.words[0][0] == '\0') varnames.len = 0; for (i = 0; i < varnames.len; i++) { const char *varname = varnames.words[i]; Global_Delete(varname); } Words_Free(varnames); free(expanded); } static bool MayExport(const char *name) { if (name[0] == '.') return false; /* skip internals */ if (name[0] == '-') return false; /* skip misnamed variables */ if (name[1] == '\0') { /* * A single char. * If it is one of the variables that should only appear in * local scope, skip it, else we can get Var_Subst * into a loop. */ switch (name[0]) { case '@': case '%': case '*': case '!': return false; } } return true; } static bool ExportVarEnv(Var *v) { const char *name = v->name.str; char *val = v->val.data; char *expr; if (v->exported && !v->reexport) return false; /* nothing to do */ if (strchr(val, '$') == NULL) { if (!v->exported) setenv(name, val, 1); return true; } if (v->inUse) { /* * We recursed while exporting in a child. * This isn't going to end well, just skip it. */ return false; } /* XXX: name is injected without escaping it */ expr = str_concat3("${", name, "}"); (void)Var_Subst(expr, SCOPE_GLOBAL, VARE_WANTRES, &val); /* TODO: handle errors */ setenv(name, val, 1); free(val); free(expr); return true; } static bool ExportVarPlain(Var *v) { if (strchr(v->val.data, '$') == NULL) { setenv(v->name.str, v->val.data, 1); v->exported = true; v->reexport = false; return true; } /* * Flag the variable as something we need to re-export. * No point actually exporting it now though, * the child process can do it at the last minute. * Avoid calling setenv more often than necessary since it can leak. */ v->exported = true; v->reexport = true; return true; } static bool ExportVarLiteral(Var *v) { if (v->exported && !v->reexport) return false; if (!v->exported) setenv(v->name.str, v->val.data, 1); return true; } /* * Mark a single variable to be exported later for subprocesses. * * Internal variables (those starting with '.') are not exported. */ static bool ExportVar(const char *name, VarExportMode mode) { Var *v; if (!MayExport(name)) return false; v = VarFind(name, SCOPE_GLOBAL, false); if (v == NULL) return false; if (mode == VEM_ENV) return ExportVarEnv(v); else if (mode == VEM_PLAIN) return ExportVarPlain(v); else return ExportVarLiteral(v); } /* * Actually export the variables that have been marked as needing to be * re-exported. */ void Var_ReexportVars(void) { char *xvarnames; /* * Several make implementations support this sort of mechanism for * tracking recursion - but each uses a different name. * We allow the makefiles to update MAKELEVEL and ensure * children see a correctly incremented value. */ char tmp[21]; snprintf(tmp, sizeof tmp, "%d", makelevel + 1); setenv(MAKE_LEVEL_ENV, tmp, 1); if (var_exportedVars == VAR_EXPORTED_NONE) return; if (var_exportedVars == VAR_EXPORTED_ALL) { HashIter hi; /* Ouch! Exporting all variables at once is crazy. */ HashIter_Init(&hi, &SCOPE_GLOBAL->vars); while (HashIter_Next(&hi) != NULL) { Var *var = hi.entry->value; ExportVar(var->name.str, VEM_ENV); } return; } (void)Var_Subst("${" MAKE_EXPORTED ":O:u}", SCOPE_GLOBAL, VARE_WANTRES, &xvarnames); /* TODO: handle errors */ if (xvarnames[0] != '\0') { Words varnames = Str_Words(xvarnames, false); size_t i; for (i = 0; i < varnames.len; i++) ExportVar(varnames.words[i], VEM_ENV); Words_Free(varnames); } free(xvarnames); } static void ExportVars(const char *varnames, bool isExport, VarExportMode mode) /* TODO: try to combine the parameters 'isExport' and 'mode'. */ { Words words = Str_Words(varnames, false); size_t i; if (words.len == 1 && words.words[0][0] == '\0') words.len = 0; for (i = 0; i < words.len; i++) { const char *varname = words.words[i]; if (!ExportVar(varname, mode)) continue; if (var_exportedVars == VAR_EXPORTED_NONE) var_exportedVars = VAR_EXPORTED_SOME; if (isExport && mode == VEM_PLAIN) Global_Append(MAKE_EXPORTED, varname); } Words_Free(words); } static void ExportVarsExpand(const char *uvarnames, bool isExport, VarExportMode mode) { char *xvarnames; (void)Var_Subst(uvarnames, SCOPE_GLOBAL, VARE_WANTRES, &xvarnames); /* TODO: handle errors */ ExportVars(xvarnames, isExport, mode); free(xvarnames); } /* Export the named variables, or all variables. */ void Var_Export(VarExportMode mode, const char *varnames) { if (mode == VEM_PLAIN && varnames[0] == '\0') { var_exportedVars = VAR_EXPORTED_ALL; /* use with caution! */ return; } ExportVarsExpand(varnames, true, mode); } void Var_ExportVars(const char *varnames) { ExportVarsExpand(varnames, false, VEM_PLAIN); } extern char **environ; static void ClearEnv(void) { const char *cp; char **newenv; cp = getenv(MAKE_LEVEL_ENV); /* we should preserve this */ if (environ == savedEnv) { /* we have been here before! */ newenv = bmake_realloc(environ, 2 * sizeof(char *)); } else { if (savedEnv != NULL) { free(savedEnv); savedEnv = NULL; } newenv = bmake_malloc(2 * sizeof(char *)); } /* Note: we cannot safely free() the original environ. */ environ = savedEnv = newenv; newenv[0] = NULL; newenv[1] = NULL; if (cp != NULL && *cp != '\0') setenv(MAKE_LEVEL_ENV, cp, 1); } static void GetVarnamesToUnexport(bool isEnv, const char *arg, FStr *out_varnames, UnexportWhat *out_what) { UnexportWhat what; FStr varnames = FStr_InitRefer(""); if (isEnv) { if (arg[0] != '\0') { Parse_Error(PARSE_FATAL, "The directive .unexport-env does not take " "arguments"); /* continue anyway */ } what = UNEXPORT_ENV; } else { what = arg[0] != '\0' ? UNEXPORT_NAMED : UNEXPORT_ALL; if (what == UNEXPORT_NAMED) varnames = FStr_InitRefer(arg); } if (what != UNEXPORT_NAMED) { char *expanded; /* Using .MAKE.EXPORTED */ (void)Var_Subst("${" MAKE_EXPORTED ":O:u}", SCOPE_GLOBAL, VARE_WANTRES, &expanded); /* TODO: handle errors */ varnames = FStr_InitOwn(expanded); } *out_varnames = varnames; *out_what = what; } static void -UnexportVar(const char *varname, UnexportWhat what) +UnexportVar(Substring varname, UnexportWhat what) { - Var *v = VarFind(varname, SCOPE_GLOBAL, false); + Var *v = VarFindSubstring(varname, SCOPE_GLOBAL, false); if (v == NULL) { - DEBUG1(VAR, "Not unexporting \"%s\" (not found)\n", varname); + DEBUG2(VAR, "Not unexporting \"%.*s\" (not found)\n", + (int)Substring_Length(varname), varname.start); return; } - DEBUG1(VAR, "Unexporting \"%s\"\n", varname); + DEBUG2(VAR, "Unexporting \"%.*s\"\n", + (int)Substring_Length(varname), varname.start); if (what != UNEXPORT_ENV && v->exported && !v->reexport) unsetenv(v->name.str); v->exported = false; v->reexport = false; if (what == UNEXPORT_NAMED) { /* Remove the variable names from .MAKE.EXPORTED. */ /* XXX: v->name is injected without escaping it */ char *expr = str_concat3("${" MAKE_EXPORTED ":N", v->name.str, "}"); char *cp; (void)Var_Subst(expr, SCOPE_GLOBAL, VARE_WANTRES, &cp); /* TODO: handle errors */ Global_Set(MAKE_EXPORTED, cp); free(cp); free(expr); } } static void UnexportVars(FStr *varnames, UnexportWhat what) { size_t i; - Words words; + SubstringWords words; if (what == UNEXPORT_ENV) ClearEnv(); - words = Str_Words(varnames->str, false); - for (i = 0; i < words.len; i++) { - const char *varname = words.words[i]; - UnexportVar(varname, what); - } - Words_Free(words); + words = Substring_Words(varnames->str, false); + for (i = 0; i < words.len; i++) + UnexportVar(words.words[i], what); + SubstringWords_Free(words); if (what != UNEXPORT_NAMED) Global_Delete(MAKE_EXPORTED); } /* * This is called when .unexport[-env] is seen. * * str must have the form "unexport[-env] varname...". */ void Var_UnExport(bool isEnv, const char *arg) { UnexportWhat what; FStr varnames; GetVarnamesToUnexport(isEnv, arg, &varnames, &what); UnexportVars(&varnames, what); FStr_Done(&varnames); } /* * When there is a variable of the same name in the command line scope, the * global variable would not be visible anywhere. Therefore there is no * point in setting it at all. * * See 'scope == SCOPE_CMDLINE' in Var_SetWithFlags. */ static bool ExistsInCmdline(const char *name, const char *val) { Var *v; v = VarFind(name, SCOPE_CMDLINE, false); if (v == NULL) return false; if (v->fromCmd) { DEBUG3(VAR, "%s: %s = %s ignored!\n", SCOPE_GLOBAL->name, name, val); return true; } VarFreeEnv(v); return false; } /* Set the variable to the value; the name is not expanded. */ void Var_SetWithFlags(GNode *scope, const char *name, const char *val, VarSetFlags flags) { Var *v; assert(val != NULL); if (name[0] == '\0') { DEBUG0(VAR, "SetVar: variable name is empty - ignored\n"); return; } if (scope == SCOPE_GLOBAL && ExistsInCmdline(name, val)) return; /* * Only look for a variable in the given scope since anything set * here will override anything in a lower scope, so there's not much * point in searching them all. */ v = VarFind(name, scope, false); if (v == NULL) { if (scope == SCOPE_CMDLINE && !(flags & VAR_SET_NO_EXPORT)) { /* * This var would normally prevent the same name being * added to SCOPE_GLOBAL, so delete it from there if * needed. Otherwise -V name may show the wrong value. * * See ExistsInCmdline. */ Var_Delete(SCOPE_GLOBAL, name); } + if (strcmp(name, ".SUFFIXES") == 0) { + /* special: treat as readOnly */ + DEBUG3(VAR, "%s: %s = %s ignored (read-only)\n", + scope->name, name, val); + return; + } v = VarAdd(name, val, scope, flags); } else { if (v->readOnly && !(flags & VAR_SET_READONLY)) { DEBUG3(VAR, "%s: %s = %s ignored (read-only)\n", scope->name, name, val); return; } Buf_Empty(&v->val); Buf_AddStr(&v->val, val); DEBUG3(VAR, "%s: %s = %s\n", scope->name, name, val); if (v->exported) ExportVar(name, VEM_PLAIN); } /* * Any variables given on the command line are automatically exported * to the environment (as per POSIX standard), except for internals. */ if (scope == SCOPE_CMDLINE && !(flags & VAR_SET_NO_EXPORT) && name[0] != '.') { v->fromCmd = true; /* * If requested, don't export these in the environment * individually. We still put them in MAKEOVERRIDES so * that the command-line settings continue to override * Makefile settings. */ if (!opts.varNoExportEnv) setenv(name, val, 1); /* XXX: What about .MAKE.EXPORTED? */ /* XXX: Why not just mark the variable for needing export, * as in ExportVarPlain? */ Global_Append(MAKEOVERRIDES, name); } if (name[0] == '.' && strcmp(name, MAKE_SAVE_DOLLARS) == 0) save_dollars = ParseBoolean(val, save_dollars); if (v != NULL) VarFreeEnv(v); } /* See Var_Set for documentation. */ void Var_SetExpandWithFlags(GNode *scope, const char *name, const char *val, VarSetFlags flags) { const char *unexpanded_name = name; FStr varname = FStr_InitRefer(name); assert(val != NULL); if (strchr(varname.str, '$') != NULL) { char *expanded; (void)Var_Subst(varname.str, scope, VARE_WANTRES, &expanded); /* TODO: handle errors */ varname = FStr_InitOwn(expanded); } if (varname.str[0] == '\0') { DEBUG2(VAR, "Var_SetExpand: variable name \"%s\" expands " "to empty string, with value \"%s\" - ignored\n", unexpanded_name, val); } else Var_SetWithFlags(scope, varname.str, val, flags); FStr_Done(&varname); } void Var_Set(GNode *scope, const char *name, const char *val) { Var_SetWithFlags(scope, name, val, VAR_SET_NONE); } /* * Set the variable name to the value val in the given scope. * * If the variable doesn't yet exist, it is created. * Otherwise the new value overwrites and replaces the old value. * * Input: + * scope scope in which to set it * name name of the variable to set, is expanded once * val value to give to the variable - * scope scope in which to set it */ void Var_SetExpand(GNode *scope, const char *name, const char *val) { Var_SetExpandWithFlags(scope, name, val, VAR_SET_NONE); } void Global_Set(const char *name, const char *value) { Var_Set(SCOPE_GLOBAL, name, value); } void Global_SetExpand(const char *name, const char *value) { Var_SetExpand(SCOPE_GLOBAL, name, value); } void Global_Delete(const char *name) { Var_Delete(SCOPE_GLOBAL, name); } /* * Append the value to the named variable. * * If the variable doesn't exist, it is created. Otherwise a single space * and the given value are appended. */ void Var_Append(GNode *scope, const char *name, const char *val) { Var *v; v = VarFind(name, scope, scope == SCOPE_GLOBAL); if (v == NULL) { Var_SetWithFlags(scope, name, val, VAR_SET_NONE); } else if (v->readOnly) { DEBUG1(VAR, "Ignoring append to %s since it is read-only\n", name); } else if (scope == SCOPE_CMDLINE || !v->fromCmd) { Buf_AddByte(&v->val, ' '); Buf_AddStr(&v->val, val); DEBUG3(VAR, "%s: %s = %s\n", scope->name, name, v->val.data); if (v->fromEnv) { /* * If the original variable came from the environment, * we have to install it in the global scope (we * could place it in the environment, but then we * should provide a way to export other variables...) */ v->fromEnv = false; /* * This is the only place where a variable is * created whose v->name is not the same as * scope->vars->key. */ HashTable_Set(&scope->vars, name, v); } } } /* * The variable of the given name has the given value appended to it in the * given scope. * * If the variable doesn't exist, it is created. Otherwise the strings are * concatenated, with a space in between. * * Input: + * scope scope in which this should occur * name name of the variable to modify, is expanded once * val string to append to it - * scope scope in which this should occur * * Notes: * Only if the variable is being sought in the global scope is the * environment searched. * XXX: Knows its calling circumstances in that if called with scope * an actual target, it will only search that scope since only * a local variable could be being appended to. This is actually * a big win and must be tolerated. */ void Var_AppendExpand(GNode *scope, const char *name, const char *val) { FStr xname = FStr_InitRefer(name); assert(val != NULL); if (strchr(name, '$') != NULL) { char *expanded; (void)Var_Subst(name, scope, VARE_WANTRES, &expanded); /* TODO: handle errors */ xname = FStr_InitOwn(expanded); if (expanded[0] == '\0') { DEBUG2(VAR, "Var_AppendExpand: variable name \"%s\" expands " "to empty string, with value \"%s\" - ignored\n", name, val); FStr_Done(&xname); return; } } Var_Append(scope, xname.str, val); FStr_Done(&xname); } void Global_Append(const char *name, const char *value) { Var_Append(SCOPE_GLOBAL, name, value); } bool Var_Exists(GNode *scope, const char *name) { Var *v = VarFind(name, scope, true); if (v == NULL) return false; VarFreeEnv(v); return true; } /* * See if the given variable exists, in the given scope or in other * fallback scopes. * * Input: - * name Variable to find, is expanded once - * scope Scope in which to start search + * scope scope in which to start search + * name name of the variable to find, is expanded once */ bool Var_ExistsExpand(GNode *scope, const char *name) { FStr varname = FStr_InitRefer(name); bool exists; if (strchr(varname.str, '$') != NULL) { char *expanded; (void)Var_Subst(varname.str, scope, VARE_WANTRES, &expanded); /* TODO: handle errors */ varname = FStr_InitOwn(expanded); } exists = Var_Exists(scope, varname.str); FStr_Done(&varname); return exists; } /* * Return the unexpanded value of the given variable in the given scope, * or the usual scopes. * * Input: - * name name to find, is not expanded any further * scope scope in which to search for it + * name name to find, is not expanded any further * * Results: * The value if the variable exists, NULL if it doesn't. * The value is valid until the next modification to any variable. */ FStr Var_Value(GNode *scope, const char *name) { Var *v = VarFind(name, scope, true); char *value; if (v == NULL) return FStr_InitRefer(NULL); if (!v->fromEnv) return FStr_InitRefer(v->val.data); /* Since environment variables are short-lived, free it now. */ FStr_Done(&v->name); value = Buf_DoneData(&v->val); free(v); return FStr_InitOwn(value); } /* * Return the unexpanded variable value from this node, without trying to look * up the variable in any other scope. */ const char * GNode_ValueDirect(GNode *gn, const char *name) { Var *v = VarFind(name, gn, false); return v != NULL ? v->val.data : NULL; } static VarEvalMode VarEvalMode_WithoutKeepDollar(VarEvalMode emode) { if (emode == VARE_KEEP_DOLLAR_UNDEF) return VARE_EVAL_KEEP_UNDEF; if (emode == VARE_EVAL_KEEP_DOLLAR) return VARE_WANTRES; return emode; } static VarEvalMode VarEvalMode_UndefOk(VarEvalMode emode) { return emode == VARE_UNDEFERR ? VARE_WANTRES : emode; } static bool VarEvalMode_ShouldEval(VarEvalMode emode) { return emode != VARE_PARSE_ONLY; } static bool VarEvalMode_ShouldKeepUndef(VarEvalMode emode) { return emode == VARE_EVAL_KEEP_UNDEF || emode == VARE_KEEP_DOLLAR_UNDEF; } static bool VarEvalMode_ShouldKeepDollar(VarEvalMode emode) { return emode == VARE_EVAL_KEEP_DOLLAR || emode == VARE_KEEP_DOLLAR_UNDEF; } static void SepBuf_Init(SepBuf *buf, char sep) { Buf_InitSize(&buf->buf, 32); buf->needSep = false; buf->sep = sep; } static void SepBuf_Sep(SepBuf *buf) { buf->needSep = true; } static void SepBuf_AddBytes(SepBuf *buf, const char *mem, size_t mem_size) { if (mem_size == 0) return; if (buf->needSep && buf->sep != '\0') { Buf_AddByte(&buf->buf, buf->sep); buf->needSep = false; } Buf_AddBytes(&buf->buf, mem, mem_size); } static void SepBuf_AddBytesBetween(SepBuf *buf, const char *start, const char *end) { SepBuf_AddBytes(buf, start, (size_t)(end - start)); } static void SepBuf_AddStr(SepBuf *buf, const char *str) { SepBuf_AddBytes(buf, str, strlen(str)); } static void SepBuf_AddSubstring(SepBuf *buf, Substring sub) { SepBuf_AddBytesBetween(buf, sub.start, sub.end); } static char * SepBuf_DoneData(SepBuf *buf) { return Buf_DoneData(&buf->buf); } /* * This callback for ModifyWords gets a single word from a variable expression * and typically adds a modification of this word to the buffer. It may also * do nothing or add several words. * * For example, when evaluating the modifier ':M*b' in ${:Ua b c:M*b}, the * callback is called 3 times, once for "a", "b" and "c". * * Some ModifyWord functions assume that they are always passed a * null-terminated substring, which is currently guaranteed but may change in * the future. */ typedef void (*ModifyWordProc)(Substring word, SepBuf *buf, void *data); /* * Callback for ModifyWords to implement the :H modifier. * Add the dirname of the given word to the buffer. */ /*ARGSUSED*/ static void ModifyWord_Head(Substring word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED) { SepBuf_AddSubstring(buf, Substring_Dirname(word)); } /* * Callback for ModifyWords to implement the :T modifier. * Add the basename of the given word to the buffer. */ /*ARGSUSED*/ static void ModifyWord_Tail(Substring word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED) { SepBuf_AddSubstring(buf, Substring_Basename(word)); } /* * Callback for ModifyWords to implement the :E modifier. * Add the filename suffix of the given word to the buffer, if it exists. */ /*ARGSUSED*/ static void ModifyWord_Suffix(Substring word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED) { const char *lastDot = Substring_LastIndex(word, '.'); if (lastDot != NULL) SepBuf_AddBytesBetween(buf, lastDot + 1, word.end); } /* * Callback for ModifyWords to implement the :R modifier. * Add the filename without extension of the given word to the buffer. */ /*ARGSUSED*/ static void ModifyWord_Root(Substring word, SepBuf *buf, void *dummy MAKE_ATTR_UNUSED) { const char *lastDot, *end; lastDot = Substring_LastIndex(word, '.'); end = lastDot != NULL ? lastDot : word.end; SepBuf_AddBytesBetween(buf, word.start, end); } /* * Callback for ModifyWords to implement the :M modifier. * Place the word in the buffer if it matches the given pattern. */ static void ModifyWord_Match(Substring word, SepBuf *buf, void *data) { const char *pattern = data; assert(word.end[0] == '\0'); /* assume null-terminated word */ if (Str_Match(word.start, pattern)) SepBuf_AddSubstring(buf, word); } /* * Callback for ModifyWords to implement the :N modifier. * Place the word in the buffer if it doesn't match the given pattern. */ static void ModifyWord_NoMatch(Substring word, SepBuf *buf, void *data) { const char *pattern = data; assert(word.end[0] == '\0'); /* assume null-terminated word */ if (!Str_Match(word.start, pattern)) SepBuf_AddSubstring(buf, word); } #ifdef SYSVVARSUB struct ModifyWord_SysVSubstArgs { GNode *scope; Substring lhsPrefix; bool lhsPercent; Substring lhsSuffix; const char *rhs; }; /* Callback for ModifyWords to implement the :%.from=%.to modifier. */ static void ModifyWord_SysVSubst(Substring word, SepBuf *buf, void *data) { const struct ModifyWord_SysVSubstArgs *args = data; FStr rhs; char *rhsExp; const char *percent; if (Substring_IsEmpty(word)) return; if (!Substring_HasPrefix(word, args->lhsPrefix)) goto no_match; if (!Substring_HasSuffix(word, args->lhsSuffix)) goto no_match; rhs = FStr_InitRefer(args->rhs); if (strchr(rhs.str, '$') != NULL) { (void)Var_Subst(args->rhs, args->scope, VARE_WANTRES, &rhsExp); /* TODO: handle errors */ rhs = FStr_InitOwn(rhsExp); } percent = args->lhsPercent ? strchr(rhs.str, '%') : NULL; if (percent != NULL) SepBuf_AddBytesBetween(buf, rhs.str, percent); if (percent != NULL || !args->lhsPercent) SepBuf_AddBytesBetween(buf, word.start + Substring_Length(args->lhsPrefix), word.end - Substring_Length(args->lhsSuffix)); SepBuf_AddStr(buf, percent != NULL ? percent + 1 : rhs.str); FStr_Done(&rhs); return; no_match: SepBuf_AddSubstring(buf, word); } #endif struct ModifyWord_SubstArgs { Substring lhs; Substring rhs; PatternFlags pflags; bool matched; }; static const char * Substring_Find(Substring haystack, Substring needle) { size_t len, needleLen, i; len = Substring_Length(haystack); needleLen = Substring_Length(needle); for (i = 0; i + needleLen <= len; i++) if (memcmp(haystack.start + i, needle.start, needleLen) == 0) return haystack.start + i; return NULL; } /* * Callback for ModifyWords to implement the :S,from,to, modifier. * Perform a string substitution on the given word. */ static void ModifyWord_Subst(Substring word, SepBuf *buf, void *data) { struct ModifyWord_SubstArgs *args = data; size_t wordLen, lhsLen; const char *wordEnd, *match; wordLen = Substring_Length(word); wordEnd = word.end; if (args->pflags.subOnce && args->matched) goto nosub; lhsLen = Substring_Length(args->lhs); if (args->pflags.anchorStart) { if (wordLen < lhsLen || memcmp(word.start, args->lhs.start, lhsLen) != 0) goto nosub; if (args->pflags.anchorEnd && wordLen != lhsLen) goto nosub; /* :S,^prefix,replacement, or :S,^whole$,replacement, */ SepBuf_AddSubstring(buf, args->rhs); SepBuf_AddBytesBetween(buf, word.start + lhsLen, wordEnd); args->matched = true; return; } if (args->pflags.anchorEnd) { if (wordLen < lhsLen) goto nosub; if (memcmp(wordEnd - lhsLen, args->lhs.start, lhsLen) != 0) goto nosub; /* :S,suffix$,replacement, */ SepBuf_AddBytesBetween(buf, word.start, wordEnd - lhsLen); SepBuf_AddSubstring(buf, args->rhs); args->matched = true; return; } if (Substring_IsEmpty(args->lhs)) goto nosub; /* unanchored case, may match more than once */ while ((match = Substring_Find(word, args->lhs)) != NULL) { SepBuf_AddBytesBetween(buf, word.start, match); SepBuf_AddSubstring(buf, args->rhs); args->matched = true; word.start = match + lhsLen; if (Substring_IsEmpty(word) || !args->pflags.subGlobal) break; } nosub: SepBuf_AddSubstring(buf, word); } #ifndef NO_REGEX /* Print the error caused by a regcomp or regexec call. */ static void VarREError(int reerr, const regex_t *pat, const char *str) { size_t errlen = regerror(reerr, pat, NULL, 0); char *errbuf = bmake_malloc(errlen); regerror(reerr, pat, errbuf, errlen); Error("%s: %s", str, errbuf); free(errbuf); } +/* + * Replacement of regular expressions is not specified by POSIX, therefore + * re-implement it here. + */ +static void +RegexReplace(const char *replace, SepBuf *buf, const char *wp, + const regmatch_t *m, size_t nsub) +{ + const char *rp; + unsigned int n; + + for (rp = replace; *rp != '\0'; rp++) { + if (*rp == '\\' && (rp[1] == '&' || rp[1] == '\\')) { + SepBuf_AddBytes(buf, rp + 1, 1); + rp++; + continue; + } + + if (*rp == '&') { + SepBuf_AddBytesBetween(buf, + wp + (size_t)m[0].rm_so, + wp + (size_t)m[0].rm_eo); + continue; + } + + if (*rp != '\\' || !ch_isdigit(rp[1])) { + SepBuf_AddBytes(buf, rp, 1); + continue; + } + + /* \0 to \9 backreference */ + n = rp[1] - '0'; + rp++; + + if (n >= nsub) { + Error("No subexpression \\%u", n); + } else if (m[n].rm_so == -1) { + if (opts.strict) { + Error("No match for subexpression \\%u", n); + } + } else { + SepBuf_AddBytesBetween(buf, + wp + (size_t)m[n].rm_so, + wp + (size_t)m[n].rm_eo); + } + } +} + struct ModifyWord_SubstRegexArgs { regex_t re; size_t nsub; const char *replace; PatternFlags pflags; bool matched; }; /* * Callback for ModifyWords to implement the :C/from/to/ modifier. * Perform a regex substitution on the given word. */ static void ModifyWord_SubstRegex(Substring word, SepBuf *buf, void *data) { struct ModifyWord_SubstRegexArgs *args = data; int xrv; const char *wp; - const char *rp; int flags = 0; regmatch_t m[10]; assert(word.end[0] == '\0'); /* assume null-terminated word */ wp = word.start; if (args->pflags.subOnce && args->matched) - goto nosub; + goto no_match; -tryagain: +again: xrv = regexec(&args->re, wp, args->nsub, m, flags); + if (xrv == 0) + goto ok; + if (xrv != REG_NOMATCH) + VarREError(xrv, &args->re, "Unexpected regex error"); +no_match: + SepBuf_AddStr(buf, wp); + return; - switch (xrv) { - case 0: - args->matched = true; - SepBuf_AddBytes(buf, wp, (size_t)m[0].rm_so); - - /* - * Replacement of regular expressions is not specified by - * POSIX, therefore implement it here. - */ - - for (rp = args->replace; *rp != '\0'; rp++) { - if (*rp == '\\' && (rp[1] == '&' || rp[1] == '\\')) { - SepBuf_AddBytes(buf, rp + 1, 1); - rp++; - continue; - } - - if (*rp == '&') { - SepBuf_AddBytesBetween(buf, - wp + m[0].rm_so, wp + m[0].rm_eo); - continue; - } - - if (*rp != '\\' || !ch_isdigit(rp[1])) { - SepBuf_AddBytes(buf, rp, 1); - continue; - } +ok: + args->matched = true; + SepBuf_AddBytes(buf, wp, (size_t)m[0].rm_so); - { /* \0 to \9 backreference */ - size_t n = (size_t)(rp[1] - '0'); - rp++; - - if (n >= args->nsub) { - Error("No subexpression \\%u", - (unsigned)n); - } else if (m[n].rm_so == -1) { - if (opts.strict) { - Error( - "No match for subexpression \\%u", - (unsigned)n); - } - } else { - SepBuf_AddBytesBetween(buf, - wp + m[n].rm_so, wp + m[n].rm_eo); - } - } - } + RegexReplace(args->replace, buf, wp, m, args->nsub); - wp += m[0].rm_eo; - if (args->pflags.subGlobal) { - flags |= REG_NOTBOL; - if (m[0].rm_so == 0 && m[0].rm_eo == 0) { - SepBuf_AddBytes(buf, wp, 1); - wp++; - } - if (*wp != '\0') - goto tryagain; + wp += (size_t)m[0].rm_eo; + if (args->pflags.subGlobal) { + flags |= REG_NOTBOL; + if (m[0].rm_so == 0 && m[0].rm_eo == 0) { + SepBuf_AddBytes(buf, wp, 1); + wp++; } if (*wp != '\0') - SepBuf_AddStr(buf, wp); - break; - default: - VarREError(xrv, &args->re, "Unexpected regex error"); - /* FALLTHROUGH */ - case REG_NOMATCH: - nosub: - SepBuf_AddStr(buf, wp); - break; + goto again; } + if (*wp != '\0') + SepBuf_AddStr(buf, wp); } #endif struct ModifyWord_LoopArgs { GNode *scope; const char *var; /* name of the temporary variable */ const char *body; /* string to expand */ VarEvalMode emode; }; /* Callback for ModifyWords to implement the :@var@...@ modifier of ODE make. */ static void ModifyWord_Loop(Substring word, SepBuf *buf, void *data) { const struct ModifyWord_LoopArgs *args; char *s; if (Substring_IsEmpty(word)) return; args = data; assert(word.end[0] == '\0'); /* assume null-terminated word */ Var_SetWithFlags(args->scope, args->var, word.start, VAR_SET_NO_EXPORT); (void)Var_Subst(args->body, args->scope, args->emode, &s); /* TODO: handle errors */ assert(word.end[0] == '\0'); /* assume null-terminated word */ DEBUG4(VAR, "ModifyWord_Loop: " "in \"%s\", replace \"%s\" with \"%s\" to \"%s\"\n", word.start, args->var, args->body, s); if (s[0] == '\n' || Buf_EndsWith(&buf->buf, '\n')) buf->needSep = false; SepBuf_AddStr(buf, s); free(s); } /* * The :[first..last] modifier selects words from the expression. * It can also reverse the words. */ static char * VarSelectWords(const char *str, int first, int last, char sep, bool oneBigWord) { - Words words; + SubstringWords words; int len, start, end, step; int i; SepBuf buf; SepBuf_Init(&buf, sep); if (oneBigWord) { - /* fake what Str_Words() would do if there were only one word */ + /* fake what Substring_Words() would do */ words.len = 1; - words.words = bmake_malloc( - (words.len + 1) * sizeof(words.words[0])); - words.freeIt = bmake_strdup(str); - words.words[0] = words.freeIt; - words.words[1] = NULL; + words.words = bmake_malloc(sizeof(words.words[0])); + words.freeIt = NULL; + words.words[0] = Substring_InitStr(str); /* no need to copy */ } else { - words = Str_Words(str, false); + words = Substring_Words(str, false); } /* * Now sanitize the given range. If first or last are negative, * convert them to the positive equivalents (-1 gets converted to len, * -2 gets converted to (len - 1), etc.). */ len = (int)words.len; if (first < 0) first += len + 1; if (last < 0) last += len + 1; /* We avoid scanning more of the list than we need to. */ if (first > last) { start = (first > len ? len : first) - 1; end = last < 1 ? 0 : last - 1; step = -1; } else { start = first < 1 ? 0 : first - 1; end = last > len ? len : last; step = 1; } for (i = start; (step < 0) == (i >= end); i += step) { - SepBuf_AddStr(&buf, words.words[i]); + SepBuf_AddSubstring(&buf, words.words[i]); SepBuf_Sep(&buf); } - Words_Free(words); + SubstringWords_Free(words); return SepBuf_DoneData(&buf); } /* * Callback for ModifyWords to implement the :tA modifier. * Replace each word with the result of realpath() if successful. */ /*ARGSUSED*/ static void ModifyWord_Realpath(Substring word, SepBuf *buf, void *data MAKE_ATTR_UNUSED) { struct stat st; char rbuf[MAXPATHLEN]; const char *rp; assert(word.end[0] == '\0'); /* assume null-terminated word */ rp = cached_realpath(word.start, rbuf); if (rp != NULL && *rp == '/' && stat(rp, &st) == 0) SepBuf_AddStr(buf, rp); else SepBuf_AddSubstring(buf, word); } static char * -Words_JoinFree(Words words) +SubstringWords_JoinFree(SubstringWords words) { Buffer buf; size_t i; Buf_Init(&buf); for (i = 0; i < words.len; i++) { if (i != 0) { /* XXX: Use ch->sep instead of ' ', for consistency. */ Buf_AddByte(&buf, ' '); } - Buf_AddStr(&buf, words.words[i]); + Buf_AddBytesBetween(&buf, + words.words[i].start, words.words[i].end); } - Words_Free(words); + SubstringWords_Free(words); return Buf_DoneData(&buf); } /* * Quote shell meta-characters and space characters in the string. * If quoteDollar is set, also quote and double any '$' characters. */ static void VarQuote(const char *str, bool quoteDollar, LazyBuf *buf) { const char *p; LazyBuf_Init(buf, str); for (p = str; *p != '\0'; p++) { if (*p == '\n') { const char *newline = Shell_GetNewline(); if (newline == NULL) newline = "\\\n"; LazyBuf_AddStr(buf, newline); continue; } if (ch_isspace(*p) || is_shell_metachar((unsigned char)*p)) LazyBuf_Add(buf, '\\'); LazyBuf_Add(buf, *p); if (quoteDollar && *p == '$') LazyBuf_AddStr(buf, "\\$"); } } /* * Compute the 32-bit hash of the given string, using the MurmurHash3 * algorithm. Output is encoded as 8 hex digits, in Little Endian order. */ static char * VarHash(const char *str) { static const char hexdigits[16] = "0123456789abcdef"; const unsigned char *ustr = (const unsigned char *)str; uint32_t h = 0x971e137bU; uint32_t c1 = 0x95543787U; uint32_t c2 = 0x2ad7eb25U; size_t len2 = strlen(str); char *buf; size_t i; size_t len; for (len = len2; len != 0;) { uint32_t k = 0; switch (len) { default: k = ((uint32_t)ustr[3] << 24) | ((uint32_t)ustr[2] << 16) | ((uint32_t)ustr[1] << 8) | (uint32_t)ustr[0]; len -= 4; ustr += 4; break; case 3: k |= (uint32_t)ustr[2] << 16; /* FALLTHROUGH */ case 2: k |= (uint32_t)ustr[1] << 8; /* FALLTHROUGH */ case 1: k |= (uint32_t)ustr[0]; len = 0; } c1 = c1 * 5 + 0x7b7d159cU; c2 = c2 * 5 + 0x6bce6396U; k *= c1; k = (k << 11) ^ (k >> 21); k *= c2; h = (h << 13) ^ (h >> 19); h = h * 5 + 0x52dce729U; h ^= k; } h ^= (uint32_t)len2; h *= 0x85ebca6b; h ^= h >> 13; h *= 0xc2b2ae35; h ^= h >> 16; buf = bmake_malloc(9); for (i = 0; i < 8; i++) { buf[i] = hexdigits[h & 0x0f]; h >>= 4; } buf[8] = '\0'; return buf; } static char * VarStrftime(const char *fmt, bool zulu, time_t tim) { char buf[BUFSIZ]; if (tim == 0) time(&tim); if (*fmt == '\0') fmt = "%c"; strftime(buf, sizeof buf, fmt, zulu ? gmtime(&tim) : localtime(&tim)); buf[sizeof buf - 1] = '\0'; return bmake_strdup(buf); } /* * The ApplyModifier functions take an expression that is being evaluated. * Their task is to apply a single modifier to the expression. This involves * parsing the modifier, evaluating it and finally updating the value of the * expression. * * Parsing the modifier * * If parsing succeeds, the parsing position *pp is updated to point to the * first character following the modifier, which typically is either ':' or * ch->endc. The modifier doesn't have to check for this delimiter character, * this is done by ApplyModifiers. * * XXX: As of 2020-11-15, some modifiers such as :S, :C, :P, :L do not * need to be followed by a ':' or endc; this was an unintended mistake. * * If parsing fails because of a missing delimiter (as in the :S, :C or :@ * modifiers), return AMR_CLEANUP. * * If parsing fails because the modifier is unknown, return AMR_UNKNOWN to * try the SysV modifier ${VAR:from=to} as fallback. This should only be * done as long as there have been no side effects from evaluating nested * variables, to avoid evaluating them more than once. In this case, the * parsing position may or may not be updated. (XXX: Why not? The original * parsing position is well-known in ApplyModifiers.) * * If parsing fails and the SysV modifier ${VAR:from=to} should not be used * as a fallback, either issue an error message using Error or Parse_Error * and then return AMR_CLEANUP, or return AMR_BAD for the default error * message. Both of these return values will stop processing the variable * expression. (XXX: As of 2020-08-23, evaluation of the whole string * continues nevertheless after skipping a few bytes, which essentially is * undefined behavior. Not in the sense of C, but still the resulting string * is garbage.) * * Evaluating the modifier * * After parsing, the modifier is evaluated. The side effects from evaluating * nested variable expressions in the modifier text often already happen * during parsing though. For most modifiers this doesn't matter since their - * only noticeable effect is that the update the value of the expression. + * only noticeable effect is that they update the value of the expression. * Some modifiers such as ':sh' or '::=' have noticeable side effects though. * * Evaluating the modifier usually takes the current value of the variable * expression from ch->expr->value, or the variable name from ch->var->name * and stores the result back in expr->value via Expr_SetValueOwn or * Expr_SetValueRefer. * * If evaluating fails (as of 2020-08-23), an error message is printed using * Error. This function has no side-effects, it really just prints the error * message. Processing the expression continues as if everything were ok. * XXX: This should be fixed by adding proper error handling to Var_Subst, * Var_Parse, ApplyModifiers and ModifyWords. * * Housekeeping * * Some modifiers such as :D and :U turn undefined expressions into defined * expressions (see Expr_Define). * * Some modifiers need to free some memory. */ typedef enum ExprDefined { /* The variable expression is based on a regular, defined variable. */ DEF_REGULAR, /* The variable expression is based on an undefined variable. */ DEF_UNDEF, /* * The variable expression started as an undefined expression, but one * of the modifiers (such as ':D' or ':U') has turned the expression * from undefined to defined. */ DEF_DEFINED } ExprDefined; -static const char *const ExprDefined_Name[] = { +static const char ExprDefined_Name[][10] = { "regular", "undefined", "defined" }; #if __STDC_VERSION__ >= 199901L #define const_member const #else #define const_member /* no const possible */ #endif -/* A variable expression such as $@ or ${VAR:Mpattern:Q}. */ +/* An expression based on a variable, such as $@ or ${VAR:Mpattern:Q}. */ typedef struct Expr { const char *name; FStr value; VarEvalMode const_member emode; GNode *const_member scope; ExprDefined defined; } Expr; /* * The status of applying a chain of modifiers to an expression. * * The modifiers of an expression are broken into chains of modifiers, * starting a new nested chain whenever an indirect modifier starts. There * are at most 2 nesting levels: the outer one for the direct modifiers, and * the inner one for the indirect modifiers. * * For example, the expression ${VAR:M*:${IND1}:${IND2}:O:u} has 3 chains of * modifiers: * * Chain 1 starts with the single modifier ':M*'. * Chain 2 starts with all modifiers from ${IND1}. * Chain 2 ends at the ':' between ${IND1} and ${IND2}. * Chain 3 starts with all modifiers from ${IND2}. * Chain 3 ends at the ':' after ${IND2}. - * Chain 1 continues with the the 2 modifiers ':O' and ':u'. + * Chain 1 continues with the 2 modifiers ':O' and ':u'. * Chain 1 ends at the final '}' of the expression. * * After such a chain ends, its properties no longer have any effect. * * It may or may not have been intended that 'defined' has scope Expr while * 'sep' and 'oneBigWord' have smaller scope. * * See varmod-indirect.mk. */ typedef struct ModChain { Expr *expr; /* '\0' or '{' or '(' */ char const_member startc; /* '\0' or '}' or ')' */ char const_member endc; /* Word separator in expansions (see the :ts modifier). */ char sep; /* * True if some modifiers that otherwise split the variable value * into words, like :S and :C, treat the variable value as a single * big word, possibly containing spaces. */ bool oneBigWord; } ModChain; static void Expr_Define(Expr *expr) { if (expr->defined == DEF_UNDEF) expr->defined = DEF_DEFINED; } +static const char * +Expr_Str(const Expr *expr) +{ + return expr->value.str; +} + +static SubstringWords +Expr_Words(const Expr *expr) +{ + return Substring_Words(Expr_Str(expr), false); +} + static void Expr_SetValue(Expr *expr, FStr value) { FStr_Done(&expr->value); expr->value = value; } static void Expr_SetValueOwn(Expr *expr, char *value) { Expr_SetValue(expr, FStr_InitOwn(value)); } static void Expr_SetValueRefer(Expr *expr, const char *value) { Expr_SetValue(expr, FStr_InitRefer(value)); } static bool Expr_ShouldEval(const Expr *expr) { return VarEvalMode_ShouldEval(expr->emode); } static bool ModChain_ShouldEval(const ModChain *ch) { return Expr_ShouldEval(ch->expr); } typedef enum ApplyModifierResult { /* Continue parsing */ AMR_OK, /* Not a match, try other modifiers as well. */ AMR_UNKNOWN, /* Error out with "Bad modifier" message. */ AMR_BAD, /* Error out without the standard error message. */ AMR_CLEANUP } ApplyModifierResult; /* * Allow backslashes to escape the delimiter, $, and \, but don't touch other * backslashes. */ static bool IsEscapedModifierPart(const char *p, char delim, struct ModifyWord_SubstArgs *subst) { if (p[0] != '\\') return false; if (p[1] == delim || p[1] == '\\' || p[1] == '$') return true; return p[1] == '&' && subst != NULL; } +/* + * In a part of a modifier, parse a subexpression and evaluate it. + */ +static void +ParseModifierPartExpr(const char **pp, LazyBuf *part, const ModChain *ch, + VarEvalMode emode) +{ + const char *p = *pp; + FStr nested_val; + + (void)Var_Parse(&p, ch->expr->scope, + VarEvalMode_WithoutKeepDollar(emode), &nested_val); + /* TODO: handle errors */ + LazyBuf_AddStr(part, nested_val.str); + FStr_Done(&nested_val); + *pp = p; +} + +/* + * In a part of a modifier, parse a subexpression but don't evaluate it. + * + * XXX: This whole block is very similar to Var_Parse with VARE_PARSE_ONLY. + * There may be subtle edge cases though that are not yet covered in the unit + * tests and that are parsed differently, depending on whether they are + * evaluated or not. + * + * This subtle difference is not documented in the manual page, neither is + * the difference between parsing ':D' and ':M' documented. No code should + * ever depend on these details, but who knows. + */ +static void +ParseModifierPartDollar(const char **pp, LazyBuf *part) +{ + const char *p = *pp; + const char *start = *pp; + + if (p[1] == '(' || p[1] == '{') { + char startc = p[1]; + int endc = startc == '(' ? ')' : '}'; + int depth = 1; + + for (p += 2; *p != '\0' && depth > 0; p++) { + if (p[-1] != '\\') { + if (*p == startc) + depth++; + if (*p == endc) + depth--; + } + } + LazyBuf_AddBytesBetween(part, start, p); + *pp = p; + } else { + LazyBuf_Add(part, *start); + *pp = p + 1; + } +} + /* See ParseModifierPart for the documentation. */ static VarParseResult ParseModifierPartSubst( const char **pp, char delim, VarEvalMode emode, ModChain *ch, LazyBuf *part, /* For the first part of the modifier ':S', set anchorEnd if the last * character of the pattern is a $. */ PatternFlags *out_pflags, /* For the second part of the :S modifier, allow ampersands to be * escaped and replace unescaped ampersands with subst->lhs. */ struct ModifyWord_SubstArgs *subst ) { const char *p; p = *pp; LazyBuf_Init(part, p); - /* - * Skim through until the matching delimiter is found; pick up - * variable expressions on the way. - */ while (*p != '\0' && *p != delim) { - const char *varstart; - if (IsEscapedModifierPart(p, delim, subst)) { LazyBuf_Add(part, p[1]); p += 2; - continue; - } - - if (*p != '$') { /* Unescaped, simple text */ + } else if (*p != '$') { /* Unescaped, simple text */ if (subst != NULL && *p == '&') LazyBuf_AddSubstring(part, subst->lhs); else LazyBuf_Add(part, *p); p++; - continue; - } - - if (p[1] == delim) { /* Unescaped $ at end of pattern */ + } else if (p[1] == delim) { /* Unescaped '$' at end */ if (out_pflags != NULL) out_pflags->anchorEnd = true; else LazyBuf_Add(part, *p); p++; - continue; - } - - if (VarEvalMode_ShouldEval(emode)) { - /* Nested variable, evaluated */ - const char *nested_p = p; - FStr nested_val; - - (void)Var_Parse(&nested_p, ch->expr->scope, - VarEvalMode_WithoutKeepDollar(emode), &nested_val); - /* TODO: handle errors */ - LazyBuf_AddStr(part, nested_val.str); - FStr_Done(&nested_val); - p += nested_p - p; - continue; - } - - /* - * XXX: This whole block is very similar to Var_Parse without - * VARE_WANTRES. There may be subtle edge cases - * though that are not yet covered in the unit tests and that - * are parsed differently, depending on whether they are - * evaluated or not. - * - * This subtle difference is not documented in the manual - * page, neither is the difference between parsing :D and - * :M documented. No code should ever depend on these - * details, but who knows. - */ - - varstart = p; /* Nested variable, only parsed */ - if (p[1] == '(' || p[1] == '{') { - /* - * Find the end of this variable reference - * and suck it in without further ado. - * It will be interpreted later. - */ - char startc = p[1]; - int endc = startc == '(' ? ')' : '}'; - int depth = 1; - - for (p += 2; *p != '\0' && depth > 0; p++) { - if (p[-1] != '\\') { - if (*p == startc) - depth++; - if (*p == endc) - depth--; - } - } - LazyBuf_AddBytesBetween(part, varstart, p); - } else { - LazyBuf_Add(part, *varstart); - p++; - } + } else if (VarEvalMode_ShouldEval(emode)) + ParseModifierPartExpr(&p, part, ch, emode); + else + ParseModifierPartDollar(&p, part); } if (*p != delim) { *pp = p; Error("Unfinished modifier for \"%s\" ('%c' missing)", ch->expr->name, delim); LazyBuf_Done(part); return VPR_ERR; } *pp = p + 1; { Substring sub = LazyBuf_Get(part); DEBUG2(VAR, "Modifier part: \"%.*s\"\n", (int)Substring_Length(sub), sub.start); } return VPR_OK; } /* * Parse a part of a modifier such as the "from" and "to" in :S/from/to/ or * the "var" or "replacement ${var}" in :@var@replacement ${var}@, up to and * including the next unescaped delimiter. The delimiter, as well as the * backslash or the dollar, can be escaped with a backslash. * * Return VPR_OK if parsing succeeded, together with the parsed (and possibly * expanded) part. In that case, pp points right after the delimiter. The * delimiter is not included in the part though. */ static VarParseResult ParseModifierPart( /* The parsing position, updated upon return */ const char **pp, /* Parsing stops at this delimiter */ char delim, /* Mode for evaluating nested variables. */ VarEvalMode emode, ModChain *ch, LazyBuf *part ) { return ParseModifierPartSubst(pp, delim, emode, ch, part, NULL, NULL); } MAKE_INLINE bool IsDelimiter(char c, const ModChain *ch) { return c == ':' || c == ch->endc; } /* Test whether mod starts with modname, followed by a delimiter. */ MAKE_INLINE bool ModMatch(const char *mod, const char *modname, const ModChain *ch) { size_t n = strlen(modname); return strncmp(mod, modname, n) == 0 && IsDelimiter(mod[n], ch); } /* Test whether mod starts with modname, followed by a delimiter or '='. */ MAKE_INLINE bool ModMatchEq(const char *mod, const char *modname, const ModChain *ch) { size_t n = strlen(modname); return strncmp(mod, modname, n) == 0 && (IsDelimiter(mod[n], ch) || mod[n] == '='); } static bool TryParseIntBase0(const char **pp, int *out_num) { char *end; long n; errno = 0; n = strtol(*pp, &end, 0); if (end == *pp) return false; if ((n == LONG_MIN || n == LONG_MAX) && errno == ERANGE) return false; if (n < INT_MIN || n > INT_MAX) return false; *pp = end; *out_num = (int)n; return true; } static bool TryParseSize(const char **pp, size_t *out_num) { char *end; unsigned long n; if (!ch_isdigit(**pp)) return false; errno = 0; n = strtoul(*pp, &end, 10); if (n == ULONG_MAX && errno == ERANGE) return false; if (n > SIZE_MAX) return false; *pp = end; *out_num = (size_t)n; return true; } static bool TryParseChar(const char **pp, int base, char *out_ch) { char *end; unsigned long n; if (!ch_isalnum(**pp)) return false; errno = 0; n = strtoul(*pp, &end, base); if (n == ULONG_MAX && errno == ERANGE) return false; if (n > UCHAR_MAX) return false; *pp = end; *out_ch = (char)n; return true; } /* * Modify each word of the expression using the given function and place the * result back in the expression. */ static void ModifyWords(ModChain *ch, ModifyWordProc modifyWord, void *modifyWord_args, bool oneBigWord) { Expr *expr = ch->expr; - const char *val = expr->value.str; + const char *val = Expr_Str(expr); SepBuf result; SubstringWords words; size_t i; Substring word; if (oneBigWord) { SepBuf_Init(&result, ch->sep); /* XXX: performance: Substring_InitStr calls strlen */ word = Substring_InitStr(val); modifyWord(word, &result, modifyWord_args); goto done; } words = Substring_Words(val, false); - DEBUG2(VAR, "ModifyWords: split \"%s\" into %u words\n", - val, (unsigned)words.len); + DEBUG3(VAR, "ModifyWords: split \"%s\" into %u %s\n", + val, (unsigned)words.len, words.len != 1 ? "words" : "word"); SepBuf_Init(&result, ch->sep); for (i = 0; i < words.len; i++) { modifyWord(words.words[i], &result, modifyWord_args); if (result.buf.len > 0) SepBuf_Sep(&result); } SubstringWords_Free(words); done: Expr_SetValueOwn(expr, SepBuf_DoneData(&result)); } /* :@var@...${var}...@ */ static ApplyModifierResult ApplyModifier_Loop(const char **pp, ModChain *ch) { Expr *expr = ch->expr; struct ModifyWord_LoopArgs args; char prev_sep; VarParseResult res; LazyBuf tvarBuf, strBuf; FStr tvar, str; args.scope = expr->scope; (*pp)++; /* Skip the first '@' */ res = ParseModifierPart(pp, '@', VARE_PARSE_ONLY, ch, &tvarBuf); if (res != VPR_OK) return AMR_CLEANUP; tvar = LazyBuf_DoneGet(&tvarBuf); args.var = tvar.str; if (strchr(args.var, '$') != NULL) { Parse_Error(PARSE_FATAL, "In the :@ modifier of \"%s\", the variable name \"%s\" " - "must not contain a dollar.", + "must not contain a dollar", expr->name, args.var); return AMR_CLEANUP; } res = ParseModifierPart(pp, '@', VARE_PARSE_ONLY, ch, &strBuf); if (res != VPR_OK) return AMR_CLEANUP; str = LazyBuf_DoneGet(&strBuf); args.body = str.str; if (!Expr_ShouldEval(expr)) goto done; args.emode = VarEvalMode_WithoutKeepDollar(expr->emode); prev_sep = ch->sep; ch->sep = ' '; /* XXX: should be ch->sep for consistency */ ModifyWords(ch, ModifyWord_Loop, &args, ch->oneBigWord); ch->sep = prev_sep; /* XXX: Consider restoring the previous value instead of deleting. */ Var_Delete(expr->scope, args.var); done: FStr_Done(&tvar); FStr_Done(&str); return AMR_OK; } /* :Ddefined or :Uundefined */ static ApplyModifierResult ApplyModifier_Defined(const char **pp, ModChain *ch) { Expr *expr = ch->expr; LazyBuf buf; const char *p; VarEvalMode emode = VARE_PARSE_ONLY; if (Expr_ShouldEval(expr)) if ((**pp == 'D') == (expr->defined == DEF_REGULAR)) emode = expr->emode; p = *pp + 1; LazyBuf_Init(&buf, p); while (!IsDelimiter(*p, ch) && *p != '\0') { /* XXX: This code is similar to the one in Var_Parse. * See if the code can be merged. * See also ApplyModifier_Match and ParseModifierPart. */ /* Escaped delimiter or other special character */ /* See Buf_AddEscaped in for.c. */ if (*p == '\\') { char c = p[1]; if (IsDelimiter(c, ch) || c == '$' || c == '\\') { LazyBuf_Add(&buf, c); p += 2; continue; } } /* Nested variable expression */ if (*p == '$') { FStr nested_val; (void)Var_Parse(&p, expr->scope, emode, &nested_val); /* TODO: handle errors */ if (Expr_ShouldEval(expr)) LazyBuf_AddStr(&buf, nested_val.str); FStr_Done(&nested_val); continue; } /* Ordinary text */ LazyBuf_Add(&buf, *p); p++; } *pp = p; Expr_Define(expr); if (VarEvalMode_ShouldEval(emode)) Expr_SetValue(expr, Substring_Str(LazyBuf_Get(&buf))); else LazyBuf_Done(&buf); return AMR_OK; } /* :L */ static ApplyModifierResult ApplyModifier_Literal(const char **pp, ModChain *ch) { Expr *expr = ch->expr; (*pp)++; if (Expr_ShouldEval(expr)) { Expr_Define(expr); Expr_SetValueOwn(expr, bmake_strdup(expr->name)); } return AMR_OK; } static bool TryParseTime(const char **pp, time_t *out_time) { char *end; unsigned long n; if (!ch_isdigit(**pp)) return false; errno = 0; n = strtoul(*pp, &end, 10); if (n == ULONG_MAX && errno == ERANGE) return false; *pp = end; *out_time = (time_t)n; /* ignore possible truncation for now */ return true; } /* :gmtime */ static ApplyModifierResult ApplyModifier_Gmtime(const char **pp, ModChain *ch) { + Expr *expr; time_t utc; const char *mod = *pp; if (!ModMatchEq(mod, "gmtime", ch)) return AMR_UNKNOWN; if (mod[6] == '=') { const char *p = mod + 7; if (!TryParseTime(&p, &utc)) { Parse_Error(PARSE_FATAL, - "Invalid time value: %s", mod + 7); + "Invalid time value at \"%s\"", mod + 7); return AMR_CLEANUP; } *pp = p; } else { utc = 0; *pp = mod + 6; } - if (ModChain_ShouldEval(ch)) - Expr_SetValueOwn(ch->expr, - VarStrftime(ch->expr->value.str, true, utc)); + expr = ch->expr; + if (Expr_ShouldEval(expr)) + Expr_SetValueOwn(expr, + VarStrftime(Expr_Str(expr), true, utc)); return AMR_OK; } /* :localtime */ static ApplyModifierResult ApplyModifier_Localtime(const char **pp, ModChain *ch) { + Expr *expr; time_t utc; const char *mod = *pp; if (!ModMatchEq(mod, "localtime", ch)) return AMR_UNKNOWN; if (mod[9] == '=') { const char *p = mod + 10; if (!TryParseTime(&p, &utc)) { Parse_Error(PARSE_FATAL, - "Invalid time value: %s", mod + 10); + "Invalid time value at \"%s\"", mod + 10); return AMR_CLEANUP; } *pp = p; } else { utc = 0; *pp = mod + 9; } - if (ModChain_ShouldEval(ch)) - Expr_SetValueOwn(ch->expr, - VarStrftime(ch->expr->value.str, false, utc)); + expr = ch->expr; + if (Expr_ShouldEval(expr)) + Expr_SetValueOwn(expr, + VarStrftime(Expr_Str(expr), false, utc)); return AMR_OK; } /* :hash */ static ApplyModifierResult ApplyModifier_Hash(const char **pp, ModChain *ch) { if (!ModMatch(*pp, "hash", ch)) return AMR_UNKNOWN; *pp += 4; if (ModChain_ShouldEval(ch)) - Expr_SetValueOwn(ch->expr, VarHash(ch->expr->value.str)); + Expr_SetValueOwn(ch->expr, VarHash(Expr_Str(ch->expr))); return AMR_OK; } /* :P */ static ApplyModifierResult ApplyModifier_Path(const char **pp, ModChain *ch) { Expr *expr = ch->expr; GNode *gn; char *path; (*pp)++; - if (!ModChain_ShouldEval(ch)) + if (!Expr_ShouldEval(expr)) return AMR_OK; Expr_Define(expr); gn = Targ_FindNode(expr->name); if (gn == NULL || gn->type & OP_NOPATH) { path = NULL; } else if (gn->path != NULL) { path = bmake_strdup(gn->path); } else { SearchPath *searchPath = Suff_FindPath(gn); path = Dir_FindFile(expr->name, searchPath); } if (path == NULL) path = bmake_strdup(expr->name); Expr_SetValueOwn(expr, path); return AMR_OK; } /* :!cmd! */ static ApplyModifierResult ApplyModifier_ShellCommand(const char **pp, ModChain *ch) { Expr *expr = ch->expr; const char *errfmt; VarParseResult res; LazyBuf cmdBuf; FStr cmd; (*pp)++; res = ParseModifierPart(pp, '!', expr->emode, ch, &cmdBuf); if (res != VPR_OK) return AMR_CLEANUP; cmd = LazyBuf_DoneGet(&cmdBuf); errfmt = NULL; if (Expr_ShouldEval(expr)) Expr_SetValueOwn(expr, Cmd_Exec(cmd.str, &errfmt)); else Expr_SetValueRefer(expr, ""); if (errfmt != NULL) Error(errfmt, cmd.str); /* XXX: why still return AMR_OK? */ FStr_Done(&cmd); Expr_Define(expr); return AMR_OK; } /* * The :range modifier generates an integer sequence as long as the words. * The :range=7 modifier generates an integer sequence from 1 to 7. */ static ApplyModifierResult ApplyModifier_Range(const char **pp, ModChain *ch) { size_t n; Buffer buf; size_t i; const char *mod = *pp; if (!ModMatchEq(mod, "range", ch)) return AMR_UNKNOWN; if (mod[5] == '=') { const char *p = mod + 6; if (!TryParseSize(&p, &n)) { Parse_Error(PARSE_FATAL, "Invalid number \"%s\" for ':range' modifier", mod + 6); return AMR_CLEANUP; } *pp = p; } else { n = 0; *pp = mod + 5; } if (!ModChain_ShouldEval(ch)) return AMR_OK; if (n == 0) { - Words words = Str_Words(ch->expr->value.str, false); + SubstringWords words = Expr_Words(ch->expr); n = words.len; - Words_Free(words); + SubstringWords_Free(words); } Buf_Init(&buf); for (i = 0; i < n; i++) { if (i != 0) { /* XXX: Use ch->sep instead of ' ', for consistency. */ Buf_AddByte(&buf, ' '); } Buf_AddInt(&buf, 1 + (int)i); } Expr_SetValueOwn(ch->expr, Buf_DoneData(&buf)); return AMR_OK; } /* Parse a ':M' or ':N' modifier. */ static void ParseModifier_Match(const char **pp, const ModChain *ch, char **out_pattern) { const char *mod = *pp; Expr *expr = ch->expr; bool copy = false; /* pattern should be, or has been, copied */ bool needSubst = false; const char *endpat; char *pattern; /* * In the loop below, ignore ':' unless we are at (or back to) the * original brace level. * XXX: This will likely not work right if $() and ${} are intermixed. */ /* * XXX: This code is similar to the one in Var_Parse. * See if the code can be merged. * See also ApplyModifier_Defined. */ int nest = 0; const char *p; for (p = mod + 1; *p != '\0' && !(*p == ':' && nest == 0); p++) { if (*p == '\\' && (IsDelimiter(p[1], ch) || p[1] == ch->startc)) { if (!needSubst) copy = true; p++; continue; } if (*p == '$') needSubst = true; if (*p == '(' || *p == '{') nest++; if (*p == ')' || *p == '}') { nest--; if (nest < 0) break; } } *pp = p; endpat = p; if (copy) { char *dst; const char *src; /* Compress the \:'s out of the pattern. */ pattern = bmake_malloc((size_t)(endpat - (mod + 1)) + 1); dst = pattern; src = mod + 1; for (; src < endpat; src++, dst++) { if (src[0] == '\\' && src + 1 < endpat && /* XXX: ch->startc is missing here; see above */ IsDelimiter(src[1], ch)) src++; *dst = *src; } *dst = '\0'; } else { pattern = bmake_strsedup(mod + 1, endpat); } if (needSubst) { char *old_pattern = pattern; (void)Var_Subst(pattern, expr->scope, expr->emode, &pattern); /* TODO: handle errors */ free(old_pattern); } DEBUG2(VAR, "Pattern for ':%c' is \"%s\"\n", mod[0], pattern); *out_pattern = pattern; } /* :Mpattern or :Npattern */ static ApplyModifierResult ApplyModifier_Match(const char **pp, ModChain *ch) { const char mod = **pp; char *pattern; ParseModifier_Match(pp, ch, &pattern); if (ModChain_ShouldEval(ch)) { ModifyWordProc modifyWord = mod == 'M' ? ModifyWord_Match : ModifyWord_NoMatch; ModifyWords(ch, modifyWord, pattern, ch->oneBigWord); } free(pattern); return AMR_OK; } static void ParsePatternFlags(const char **pp, PatternFlags *pflags, bool *oneBigWord) { for (;; (*pp)++) { if (**pp == 'g') pflags->subGlobal = true; else if (**pp == '1') pflags->subOnce = true; else if (**pp == 'W') *oneBigWord = true; else break; } } MAKE_INLINE PatternFlags PatternFlags_None(void) { PatternFlags pflags = { false, false, false, false }; return pflags; } /* :S,from,to, */ static ApplyModifierResult ApplyModifier_Subst(const char **pp, ModChain *ch) { struct ModifyWord_SubstArgs args; bool oneBigWord; VarParseResult res; LazyBuf lhsBuf, rhsBuf; char delim = (*pp)[1]; if (delim == '\0') { Error("Missing delimiter for modifier ':S'"); (*pp)++; return AMR_CLEANUP; } *pp += 2; args.pflags = PatternFlags_None(); args.matched = false; if (**pp == '^') { args.pflags.anchorStart = true; (*pp)++; } res = ParseModifierPartSubst(pp, delim, ch->expr->emode, ch, &lhsBuf, &args.pflags, NULL); if (res != VPR_OK) return AMR_CLEANUP; args.lhs = LazyBuf_Get(&lhsBuf); res = ParseModifierPartSubst(pp, delim, ch->expr->emode, ch, &rhsBuf, NULL, &args); if (res != VPR_OK) { LazyBuf_Done(&lhsBuf); return AMR_CLEANUP; } args.rhs = LazyBuf_Get(&rhsBuf); oneBigWord = ch->oneBigWord; ParsePatternFlags(pp, &args.pflags, &oneBigWord); ModifyWords(ch, ModifyWord_Subst, &args, oneBigWord); LazyBuf_Done(&lhsBuf); LazyBuf_Done(&rhsBuf); return AMR_OK; } #ifndef NO_REGEX /* :C,from,to, */ static ApplyModifierResult ApplyModifier_Regex(const char **pp, ModChain *ch) { struct ModifyWord_SubstRegexArgs args; bool oneBigWord; int error; VarParseResult res; LazyBuf reBuf, replaceBuf; FStr re, replace; char delim = (*pp)[1]; if (delim == '\0') { Error("Missing delimiter for :C modifier"); (*pp)++; return AMR_CLEANUP; } *pp += 2; res = ParseModifierPart(pp, delim, ch->expr->emode, ch, &reBuf); if (res != VPR_OK) return AMR_CLEANUP; re = LazyBuf_DoneGet(&reBuf); res = ParseModifierPart(pp, delim, ch->expr->emode, ch, &replaceBuf); if (res != VPR_OK) { FStr_Done(&re); return AMR_CLEANUP; } replace = LazyBuf_DoneGet(&replaceBuf); args.replace = replace.str; args.pflags = PatternFlags_None(); args.matched = false; oneBigWord = ch->oneBigWord; ParsePatternFlags(pp, &args.pflags, &oneBigWord); if (!ModChain_ShouldEval(ch)) { FStr_Done(&replace); FStr_Done(&re); return AMR_OK; } error = regcomp(&args.re, re.str, REG_EXTENDED); if (error != 0) { VarREError(error, &args.re, "Regex compilation error"); FStr_Done(&replace); FStr_Done(&re); return AMR_CLEANUP; } args.nsub = args.re.re_nsub + 1; if (args.nsub > 10) args.nsub = 10; ModifyWords(ch, ModifyWord_SubstRegex, &args, oneBigWord); regfree(&args.re); FStr_Done(&replace); FStr_Done(&re); return AMR_OK; } #endif /* :Q, :q */ static ApplyModifierResult ApplyModifier_Quote(const char **pp, ModChain *ch) { LazyBuf buf; bool quoteDollar; quoteDollar = **pp == 'q'; if (!IsDelimiter((*pp)[1], ch)) return AMR_UNKNOWN; (*pp)++; if (!ModChain_ShouldEval(ch)) return AMR_OK; - VarQuote(ch->expr->value.str, quoteDollar, &buf); + VarQuote(Expr_Str(ch->expr), quoteDollar, &buf); if (buf.data != NULL) Expr_SetValue(ch->expr, LazyBuf_DoneGet(&buf)); else LazyBuf_Done(&buf); return AMR_OK; } /*ARGSUSED*/ static void ModifyWord_Copy(Substring word, SepBuf *buf, void *data MAKE_ATTR_UNUSED) { SepBuf_AddSubstring(buf, word); } /* :ts */ static ApplyModifierResult ApplyModifier_ToSep(const char **pp, ModChain *ch) { const char *sep = *pp + 2; /* * Even in parse-only mode, proceed as normal since there is * neither any observable side effect nor a performance penalty. * Checking for wantRes for every single piece of code in here * would make the code in this function too hard to read. */ /* ":ts" or ":ts:" */ if (sep[0] != ch->endc && IsDelimiter(sep[1], ch)) { *pp = sep + 1; ch->sep = sep[0]; goto ok; } /* ":ts" or ":ts:" */ if (IsDelimiter(sep[0], ch)) { *pp = sep; ch->sep = '\0'; /* no separator */ goto ok; } /* ":ts". */ if (sep[0] != '\\') { (*pp)++; /* just for backwards compatibility */ return AMR_BAD; } /* ":ts\n" */ if (sep[1] == 'n') { *pp = sep + 2; ch->sep = '\n'; goto ok; } /* ":ts\t" */ if (sep[1] == 't') { *pp = sep + 2; ch->sep = '\t'; goto ok; } /* ":ts\x40" or ":ts\100" */ { const char *p = sep + 1; int base = 8; /* assume octal */ if (sep[1] == 'x') { base = 16; p++; } else if (!ch_isdigit(sep[1])) { (*pp)++; /* just for backwards compatibility */ return AMR_BAD; /* ":ts". */ } if (!TryParseChar(&p, base, &ch->sep)) { Parse_Error(PARSE_FATAL, - "Invalid character number: %s", p); + "Invalid character number at \"%s\"", p); return AMR_CLEANUP; } if (!IsDelimiter(*p, ch)) { (*pp)++; /* just for backwards compatibility */ return AMR_BAD; } *pp = p; } ok: ModifyWords(ch, ModifyWord_Copy, NULL, ch->oneBigWord); return AMR_OK; } static char * str_toupper(const char *str) { char *res; size_t i, len; len = strlen(str); res = bmake_malloc(len + 1); for (i = 0; i < len + 1; i++) res[i] = ch_toupper(str[i]); return res; } static char * str_tolower(const char *str) { char *res; size_t i, len; len = strlen(str); res = bmake_malloc(len + 1); for (i = 0; i < len + 1; i++) res[i] = ch_tolower(str[i]); return res; } /* :tA, :tu, :tl, :ts, etc. */ static ApplyModifierResult ApplyModifier_To(const char **pp, ModChain *ch) { Expr *expr = ch->expr; const char *mod = *pp; assert(mod[0] == 't'); if (IsDelimiter(mod[1], ch) || mod[1] == '\0') { *pp = mod + 1; return AMR_BAD; /* Found ":t" or ":t:". */ } if (mod[1] == 's') return ApplyModifier_ToSep(pp, ch); if (!IsDelimiter(mod[2], ch)) { /* :t */ *pp = mod + 1; return AMR_BAD; } if (mod[1] == 'A') { /* :tA */ *pp = mod + 2; ModifyWords(ch, ModifyWord_Realpath, NULL, ch->oneBigWord); return AMR_OK; } if (mod[1] == 'u') { /* :tu */ *pp = mod + 2; - if (ModChain_ShouldEval(ch)) - Expr_SetValueOwn(expr, str_toupper(expr->value.str)); + if (Expr_ShouldEval(expr)) + Expr_SetValueOwn(expr, str_toupper(Expr_Str(expr))); return AMR_OK; } if (mod[1] == 'l') { /* :tl */ *pp = mod + 2; - if (ModChain_ShouldEval(ch)) - Expr_SetValueOwn(expr, str_tolower(expr->value.str)); + if (Expr_ShouldEval(expr)) + Expr_SetValueOwn(expr, str_tolower(Expr_Str(expr))); return AMR_OK; } if (mod[1] == 'W' || mod[1] == 'w') { /* :tW, :tw */ *pp = mod + 2; ch->oneBigWord = mod[1] == 'W'; return AMR_OK; } /* Found ":t:" or ":t". */ *pp = mod + 1; /* XXX: unnecessary but observable */ return AMR_BAD; } /* :[#], :[1], :[-1..1], etc. */ static ApplyModifierResult ApplyModifier_Words(const char **pp, ModChain *ch) { Expr *expr = ch->expr; const char *estr; int first, last; VarParseResult res; const char *p; LazyBuf estrBuf; FStr festr; (*pp)++; /* skip the '[' */ res = ParseModifierPart(pp, ']', expr->emode, ch, &estrBuf); if (res != VPR_OK) return AMR_CLEANUP; festr = LazyBuf_DoneGet(&estrBuf); estr = festr.str; if (!IsDelimiter(**pp, ch)) goto bad_modifier; /* Found junk after ']' */ if (!ModChain_ShouldEval(ch)) goto ok; if (estr[0] == '\0') goto bad_modifier; /* Found ":[]". */ if (estr[0] == '#' && estr[1] == '\0') { /* Found ":[#]" */ if (ch->oneBigWord) { Expr_SetValueRefer(expr, "1"); } else { Buffer buf; - Words words = Str_Words(expr->value.str, false); + SubstringWords words = Expr_Words(expr); size_t ac = words.len; - Words_Free(words); + SubstringWords_Free(words); /* 3 digits + '\0' is usually enough */ Buf_InitSize(&buf, 4); Buf_AddInt(&buf, (int)ac); Expr_SetValueOwn(expr, Buf_DoneData(&buf)); } goto ok; } if (estr[0] == '*' && estr[1] == '\0') { /* Found ":[*]" */ ch->oneBigWord = true; goto ok; } if (estr[0] == '@' && estr[1] == '\0') { /* Found ":[@]" */ ch->oneBigWord = false; goto ok; } /* * We expect estr to contain a single integer for :[N], or two * integers separated by ".." for :[start..end]. */ p = estr; if (!TryParseIntBase0(&p, &first)) goto bad_modifier; /* Found junk instead of a number */ if (p[0] == '\0') { /* Found only one integer in :[N] */ last = first; } else if (p[0] == '.' && p[1] == '.' && p[2] != '\0') { /* Expecting another integer after ".." */ p += 2; if (!TryParseIntBase0(&p, &last) || *p != '\0') goto bad_modifier; /* Found junk after ".." */ } else goto bad_modifier; /* Found junk instead of ".." */ /* * Now first and last are properly filled in, but we still have to * check for 0 as a special case. */ if (first == 0 && last == 0) { /* ":[0]" or perhaps ":[0..0]" */ ch->oneBigWord = true; goto ok; } /* ":[0..N]" or ":[N..0]" */ if (first == 0 || last == 0) goto bad_modifier; /* Normal case: select the words described by first and last. */ Expr_SetValueOwn(expr, - VarSelectWords(expr->value.str, first, last, + VarSelectWords(Expr_Str(expr), first, last, ch->sep, ch->oneBigWord)); ok: FStr_Done(&festr); return AMR_OK; bad_modifier: FStr_Done(&festr); return AMR_BAD; } +#ifndef NUM_TYPE +# ifdef HAVE_LONG_LONG_INT +# define NUM_TYPE long long +# elif defined(_INT64_T_DECLARED) || defined(int64_t) +# define NUM_TYPE int64_t +# else +# define NUM_TYPE long +# define strtoll strtol +# endif +#endif + +static NUM_TYPE +num_val(Substring s) +{ + NUM_TYPE val; + char *ep; + + val = strtoll(s.start, &ep, 0); + if (ep != s.start) { + switch (*ep) { + case 'K': + case 'k': + val <<= 10; + break; + case 'M': + case 'm': + val <<= 20; + break; + case 'G': + case 'g': + val <<= 30; + break; + } + } + return val; +} + static int -str_cmp_asc(const void *a, const void *b) +SubNumAsc(const void *sa, const void *sb) { - return strcmp(*(const char *const *)a, *(const char *const *)b); + NUM_TYPE a, b; + + a = num_val(*((const Substring *)sa)); + b = num_val(*((const Substring *)sb)); + return (a > b) ? 1 : (b > a) ? -1 : 0; } static int -str_cmp_desc(const void *a, const void *b) +SubNumDesc(const void *sa, const void *sb) { - return strcmp(*(const char *const *)b, *(const char *const *)a); + return SubNumAsc(sb, sa); +} + +static int +SubStrAsc(const void *sa, const void *sb) +{ + return strcmp( + ((const Substring *)sa)->start, ((const Substring *)sb)->start); +} + +static int +SubStrDesc(const void *sa, const void *sb) +{ + return SubStrAsc(sb, sa); } static void -ShuffleStrings(char **strs, size_t n) +ShuffleSubstrings(Substring *strs, size_t n) { size_t i; for (i = n - 1; i > 0; i--) { size_t rndidx = (size_t)random() % (i + 1); - char *t = strs[i]; + Substring t = strs[i]; strs[i] = strs[rndidx]; strs[rndidx] = t; } } -/* :O (order ascending) or :Or (order descending) or :Ox (shuffle) */ +/* + * :O order ascending + * :Or order descending + * :Ox shuffle + * :On numeric ascending + * :Onr, :Orn numeric descending + */ static ApplyModifierResult ApplyModifier_Order(const char **pp, ModChain *ch) { - const char *mod = (*pp)++; /* skip past the 'O' in any case */ - Words words; - enum SortMode { - ASC, DESC, SHUFFLE - } mode; + const char *mod = *pp; + SubstringWords words; + int (*cmp)(const void *, const void *); - if (IsDelimiter(mod[1], ch)) { - mode = ASC; - } else if ((mod[1] == 'r' || mod[1] == 'x') && - IsDelimiter(mod[2], ch)) { + if (IsDelimiter(mod[1], ch) || mod[1] == '\0') { + cmp = SubStrAsc; (*pp)++; - mode = mod[1] == 'r' ? DESC : SHUFFLE; - } else - return AMR_BAD; + } else if (IsDelimiter(mod[2], ch) || mod[2] == '\0') { + if (mod[1] == 'n') + cmp = SubNumAsc; + else if (mod[1] == 'r') + cmp = SubStrDesc; + else if (mod[1] == 'x') + cmp = NULL; + else + goto bad; + *pp += 2; + } else if (IsDelimiter(mod[3], ch) || mod[3] == '\0') { + if ((mod[1] == 'n' && mod[2] == 'r') || + (mod[1] == 'r' && mod[2] == 'n')) + cmp = SubNumDesc; + else + goto bad; + *pp += 3; + } else { + goto bad; + } if (!ModChain_ShouldEval(ch)) return AMR_OK; - words = Str_Words(ch->expr->value.str, false); - if (mode == SHUFFLE) - ShuffleStrings(words.words, words.len); - else - qsort(words.words, words.len, sizeof words.words[0], - mode == ASC ? str_cmp_asc : str_cmp_desc); - Expr_SetValueOwn(ch->expr, Words_JoinFree(words)); + words = Expr_Words(ch->expr); + if (cmp == NULL) + ShuffleSubstrings(words.words, words.len); + else { + assert(words.words[0].end[0] == '\0'); + qsort(words.words, words.len, sizeof(words.words[0]), cmp); + } + Expr_SetValueOwn(ch->expr, SubstringWords_JoinFree(words)); return AMR_OK; + +bad: + (*pp)++; + return AMR_BAD; } /* :? then : else */ static ApplyModifierResult ApplyModifier_IfElse(const char **pp, ModChain *ch) { Expr *expr = ch->expr; VarParseResult res; LazyBuf buf; FStr then_expr, else_expr; bool value = false; VarEvalMode then_emode = VARE_PARSE_ONLY; VarEvalMode else_emode = VARE_PARSE_ONLY; - int cond_rc = COND_PARSE; /* anything other than COND_INVALID */ + CondEvalResult cond_rc = COND_PARSE; /* just not COND_INVALID */ if (Expr_ShouldEval(expr)) { cond_rc = Cond_EvalCondition(expr->name, &value); if (cond_rc != COND_INVALID && value) then_emode = expr->emode; if (cond_rc != COND_INVALID && !value) else_emode = expr->emode; } (*pp)++; /* skip past the '?' */ res = ParseModifierPart(pp, ':', then_emode, ch, &buf); if (res != VPR_OK) return AMR_CLEANUP; then_expr = LazyBuf_DoneGet(&buf); res = ParseModifierPart(pp, ch->endc, else_emode, ch, &buf); if (res != VPR_OK) { FStr_Done(&then_expr); return AMR_CLEANUP; } else_expr = LazyBuf_DoneGet(&buf); (*pp)--; /* Go back to the ch->endc. */ if (cond_rc == COND_INVALID) { Error("Bad conditional expression '%s' in '%s?%s:%s'", expr->name, expr->name, then_expr.str, else_expr.str); + FStr_Done(&then_expr); + FStr_Done(&else_expr); return AMR_CLEANUP; } - if (!ModChain_ShouldEval(ch)) { + if (!Expr_ShouldEval(expr)) { FStr_Done(&then_expr); FStr_Done(&else_expr); } else if (value) { Expr_SetValue(expr, then_expr); FStr_Done(&else_expr); } else { FStr_Done(&then_expr); Expr_SetValue(expr, else_expr); } Expr_Define(expr); return AMR_OK; } /* * The ::= modifiers are special in that they do not read the variable value * but instead assign to that variable. They always expand to an empty * string. * * Their main purpose is in supporting .for loops that generate shell commands * since an ordinary variable assignment at that point would terminate the * dependency group for these targets. For example: * * list-targets: .USE * .for i in ${.TARGET} ${.TARGET:R}.gz * @${t::=$i} * @echo 'The target is ${t:T}.' * .endfor * * ::= Assigns as the new value of variable. * ::?= Assigns as value of variable if * it was not already set. * ::+= Appends to variable. * ::!= Assigns output of as the new value of * variable. */ static ApplyModifierResult ApplyModifier_Assign(const char **pp, ModChain *ch) { Expr *expr = ch->expr; GNode *scope; FStr val; VarParseResult res; LazyBuf buf; const char *mod = *pp; const char *op = mod + 1; if (op[0] == '=') goto ok; if ((op[0] == '!' || op[0] == '+' || op[0] == '?') && op[1] == '=') goto ok; return AMR_UNKNOWN; /* "::" */ ok: if (expr->name[0] == '\0') { *pp = mod + 1; return AMR_BAD; } switch (op[0]) { case '+': case '?': case '!': *pp = mod + 3; break; default: *pp = mod + 2; break; } res = ParseModifierPart(pp, ch->endc, expr->emode, ch, &buf); if (res != VPR_OK) return AMR_CLEANUP; val = LazyBuf_DoneGet(&buf); (*pp)--; /* Go back to the ch->endc. */ if (!Expr_ShouldEval(expr)) goto done; scope = expr->scope; /* scope where v belongs */ if (expr->defined == DEF_REGULAR && expr->scope != SCOPE_GLOBAL) { Var *gv = VarFind(expr->name, expr->scope, false); if (gv == NULL) scope = SCOPE_GLOBAL; else VarFreeEnv(gv); } switch (op[0]) { case '+': Var_Append(scope, expr->name, val.str); break; case '!': { const char *errfmt; char *cmd_output = Cmd_Exec(val.str, &errfmt); if (errfmt != NULL) Error(errfmt, val.str); else Var_Set(scope, expr->name, cmd_output); free(cmd_output); break; } case '?': if (expr->defined == DEF_REGULAR) break; /* FALLTHROUGH */ default: Var_Set(scope, expr->name, val.str); break; } Expr_SetValueRefer(expr, ""); done: FStr_Done(&val); return AMR_OK; } /* * :_=... * remember current value */ static ApplyModifierResult ApplyModifier_Remember(const char **pp, ModChain *ch) { Expr *expr = ch->expr; const char *mod = *pp; FStr name; if (!ModMatchEq(mod, "_", ch)) return AMR_UNKNOWN; name = FStr_InitRefer("_"); if (mod[1] == '=') { /* * XXX: This ad-hoc call to strcspn deviates from the usual * behavior defined in ParseModifierPart. This creates an * unnecessary, undocumented inconsistency in make. */ const char *arg = mod + 2; size_t argLen = strcspn(arg, ":)}"); *pp = arg + argLen; name = FStr_InitOwn(bmake_strldup(arg, argLen)); } else *pp = mod + 1; if (Expr_ShouldEval(expr)) - Var_Set(expr->scope, name.str, expr->value.str); + Var_Set(expr->scope, name.str, Expr_Str(expr)); FStr_Done(&name); return AMR_OK; } /* * Apply the given function to each word of the variable value, * for a single-letter modifier such as :H, :T. */ static ApplyModifierResult ApplyModifier_WordFunc(const char **pp, ModChain *ch, ModifyWordProc modifyWord) { if (!IsDelimiter((*pp)[1], ch)) return AMR_UNKNOWN; (*pp)++; if (ModChain_ShouldEval(ch)) ModifyWords(ch, modifyWord, NULL, ch->oneBigWord); return AMR_OK; } /* Remove adjacent duplicate words. */ static ApplyModifierResult ApplyModifier_Unique(const char **pp, ModChain *ch) { - Words words; + SubstringWords words; if (!IsDelimiter((*pp)[1], ch)) return AMR_UNKNOWN; (*pp)++; if (!ModChain_ShouldEval(ch)) return AMR_OK; - words = Str_Words(ch->expr->value.str, false); + words = Expr_Words(ch->expr); if (words.len > 1) { size_t si, di; di = 0; for (si = 1; si < words.len; si++) { - if (strcmp(words.words[si], words.words[di]) != 0) { + if (!Substring_Eq(words.words[si], words.words[di])) { di++; if (di != si) words.words[di] = words.words[si]; } } words.len = di + 1; } - Expr_SetValueOwn(ch->expr, Words_JoinFree(words)); + Expr_SetValueOwn(ch->expr, SubstringWords_JoinFree(words)); return AMR_OK; } #ifdef SYSVVARSUB /* :from=to */ static ApplyModifierResult ApplyModifier_SysV(const char **pp, ModChain *ch) { Expr *expr = ch->expr; VarParseResult res; LazyBuf lhsBuf, rhsBuf; FStr rhs; struct ModifyWord_SysVSubstArgs args; Substring lhs; const char *lhsSuffix; const char *mod = *pp; bool eqFound = false; /* * First we make a pass through the string trying to verify it is a * SysV-make-style translation. It must be: = */ int depth = 1; const char *p = mod; while (*p != '\0' && depth > 0) { if (*p == '=') { /* XXX: should also test depth == 1 */ eqFound = true; /* continue looking for ch->endc */ } else if (*p == ch->endc) depth--; else if (*p == ch->startc) depth++; if (depth > 0) p++; } if (*p != ch->endc || !eqFound) return AMR_UNKNOWN; res = ParseModifierPart(pp, '=', expr->emode, ch, &lhsBuf); if (res != VPR_OK) return AMR_CLEANUP; /* The SysV modifier lasts until the end of the variable expression. */ res = ParseModifierPart(pp, ch->endc, expr->emode, ch, &rhsBuf); if (res != VPR_OK) { LazyBuf_Done(&lhsBuf); return AMR_CLEANUP; } rhs = LazyBuf_DoneGet(&rhsBuf); (*pp)--; /* Go back to the ch->endc. */ /* Do not turn an empty expression into non-empty. */ - if (lhsBuf.len == 0 && expr->value.str[0] == '\0') + if (lhsBuf.len == 0 && Expr_Str(expr)[0] == '\0') goto done; lhs = LazyBuf_Get(&lhsBuf); lhsSuffix = Substring_SkipFirst(lhs, '%'); args.scope = expr->scope; args.lhsPrefix = Substring_Init(lhs.start, lhsSuffix != lhs.start ? lhsSuffix - 1 : lhs.start); args.lhsPercent = lhsSuffix != lhs.start; args.lhsSuffix = Substring_Init(lhsSuffix, lhs.end); args.rhs = rhs.str; ModifyWords(ch, ModifyWord_SysVSubst, &args, ch->oneBigWord); done: LazyBuf_Done(&lhsBuf); return AMR_OK; } #endif #ifdef SUNSHCMD /* :sh */ static ApplyModifierResult ApplyModifier_SunShell(const char **pp, ModChain *ch) { Expr *expr = ch->expr; const char *p = *pp; if (!(p[1] == 'h' && IsDelimiter(p[2], ch))) return AMR_UNKNOWN; *pp = p + 2; if (Expr_ShouldEval(expr)) { const char *errfmt; - char *output = Cmd_Exec(expr->value.str, &errfmt); + char *output = Cmd_Exec(Expr_Str(expr), &errfmt); if (errfmt != NULL) - Error(errfmt, expr->value.str); + Error(errfmt, Expr_Str(expr)); Expr_SetValueOwn(expr, output); } return AMR_OK; } #endif static void LogBeforeApply(const ModChain *ch, const char *mod) { const Expr *expr = ch->expr; bool is_single_char = mod[0] != '\0' && IsDelimiter(mod[1], ch); /* * At this point, only the first character of the modifier can * be used since the end of the modifier is not yet known. */ if (!Expr_ShouldEval(expr)) { debug_printf("Parsing modifier ${%s:%c%s}\n", expr->name, mod[0], is_single_char ? "" : "..."); return; } if ((expr->emode == VARE_WANTRES || expr->emode == VARE_UNDEFERR) && expr->defined == DEF_REGULAR) { debug_printf( "Evaluating modifier ${%s:%c%s} on value \"%s\"\n", expr->name, mod[0], is_single_char ? "" : "...", - expr->value.str); + Expr_Str(expr)); return; } debug_printf( "Evaluating modifier ${%s:%c%s} on value \"%s\" (%s, %s)\n", - expr->name, mod[0], is_single_char ? "" : "...", expr->value.str, + expr->name, mod[0], is_single_char ? "" : "...", Expr_Str(expr), VarEvalMode_Name[expr->emode], ExprDefined_Name[expr->defined]); } static void LogAfterApply(const ModChain *ch, const char *p, const char *mod) { const Expr *expr = ch->expr; - const char *value = expr->value.str; + const char *value = Expr_Str(expr); const char *quot = value == var_Error ? "" : "\""; if ((expr->emode == VARE_WANTRES || expr->emode == VARE_UNDEFERR) && expr->defined == DEF_REGULAR) { debug_printf("Result of ${%s:%.*s} is %s%s%s\n", expr->name, (int)(p - mod), mod, quot, value == var_Error ? "error" : value, quot); return; } debug_printf("Result of ${%s:%.*s} is %s%s%s (%s, %s)\n", expr->name, (int)(p - mod), mod, quot, value == var_Error ? "error" : value, quot, VarEvalMode_Name[expr->emode], ExprDefined_Name[expr->defined]); } static ApplyModifierResult ApplyModifier(const char **pp, ModChain *ch) { switch (**pp) { case '!': return ApplyModifier_ShellCommand(pp, ch); case ':': return ApplyModifier_Assign(pp, ch); case '?': return ApplyModifier_IfElse(pp, ch); case '@': return ApplyModifier_Loop(pp, ch); case '[': return ApplyModifier_Words(pp, ch); case '_': return ApplyModifier_Remember(pp, ch); #ifndef NO_REGEX case 'C': return ApplyModifier_Regex(pp, ch); #endif case 'D': + case 'U': return ApplyModifier_Defined(pp, ch); case 'E': return ApplyModifier_WordFunc(pp, ch, ModifyWord_Suffix); case 'g': return ApplyModifier_Gmtime(pp, ch); case 'H': return ApplyModifier_WordFunc(pp, ch, ModifyWord_Head); case 'h': return ApplyModifier_Hash(pp, ch); case 'L': return ApplyModifier_Literal(pp, ch); case 'l': return ApplyModifier_Localtime(pp, ch); case 'M': case 'N': return ApplyModifier_Match(pp, ch); case 'O': return ApplyModifier_Order(pp, ch); case 'P': return ApplyModifier_Path(pp, ch); case 'Q': case 'q': return ApplyModifier_Quote(pp, ch); case 'R': return ApplyModifier_WordFunc(pp, ch, ModifyWord_Root); case 'r': return ApplyModifier_Range(pp, ch); case 'S': return ApplyModifier_Subst(pp, ch); #ifdef SUNSHCMD case 's': return ApplyModifier_SunShell(pp, ch); #endif case 'T': return ApplyModifier_WordFunc(pp, ch, ModifyWord_Tail); case 't': return ApplyModifier_To(pp, ch); - case 'U': - return ApplyModifier_Defined(pp, ch); case 'u': return ApplyModifier_Unique(pp, ch); default: return AMR_UNKNOWN; } } static void ApplyModifiers(Expr *, const char **, char, char); typedef enum ApplyModifiersIndirectResult { /* The indirect modifiers have been applied successfully. */ AMIR_CONTINUE, /* Fall back to the SysV modifier. */ AMIR_SYSV, /* Error out. */ AMIR_OUT } ApplyModifiersIndirectResult; /* * While expanding a variable expression, expand and apply indirect modifiers, * such as in ${VAR:${M_indirect}}. * * All indirect modifiers of a group must come from a single variable * expression. ${VAR:${M1}} is valid but ${VAR:${M1}${M2}} is not. * * Multiple groups of indirect modifiers can be chained by separating them * with colons. ${VAR:${M1}:${M2}} contains 2 indirect modifiers. * * If the variable expression is not followed by ch->endc or ':', fall * back to trying the SysV modifier, such as in ${VAR:${FROM}=${TO}}. */ static ApplyModifiersIndirectResult ApplyModifiersIndirect(ModChain *ch, const char **pp) { Expr *expr = ch->expr; const char *p = *pp; FStr mods; (void)Var_Parse(&p, expr->scope, expr->emode, &mods); /* TODO: handle errors */ if (mods.str[0] != '\0' && *p != '\0' && !IsDelimiter(*p, ch)) { FStr_Done(&mods); return AMIR_SYSV; } DEBUG3(VAR, "Indirect modifier \"%s\" from \"%.*s\"\n", mods.str, (int)(p - *pp), *pp); if (mods.str[0] != '\0') { const char *modsp = mods.str; ApplyModifiers(expr, &modsp, '\0', '\0'); - if (expr->value.str == var_Error || *modsp != '\0') { + if (Expr_Str(expr) == var_Error || *modsp != '\0') { FStr_Done(&mods); *pp = p; return AMIR_OUT; /* error already reported */ } } FStr_Done(&mods); if (*p == ':') p++; else if (*p == '\0' && ch->endc != '\0') { Error("Unclosed variable expression after indirect " "modifier, expecting '%c' for variable \"%s\"", ch->endc, expr->name); *pp = p; return AMIR_OUT; } *pp = p; return AMIR_CONTINUE; } static ApplyModifierResult ApplySingleModifier(const char **pp, ModChain *ch) { ApplyModifierResult res; const char *mod = *pp; const char *p = *pp; if (DEBUG(VAR)) LogBeforeApply(ch, mod); res = ApplyModifier(&p, ch); #ifdef SYSVVARSUB if (res == AMR_UNKNOWN) { assert(p == mod); res = ApplyModifier_SysV(&p, ch); } #endif if (res == AMR_UNKNOWN) { /* * Guess the end of the current modifier. * XXX: Skipping the rest of the modifier hides * errors and leads to wrong results. * Parsing should rather stop here. */ for (p++; !IsDelimiter(*p, ch) && *p != '\0'; p++) continue; Parse_Error(PARSE_FATAL, "Unknown modifier \"%.*s\"", (int)(p - mod), mod); Expr_SetValueRefer(ch->expr, var_Error); } if (res == AMR_CLEANUP || res == AMR_BAD) { *pp = p; return res; } if (DEBUG(VAR)) LogAfterApply(ch, p, mod); if (*p == '\0' && ch->endc != '\0') { Error( "Unclosed variable expression, expecting '%c' for " "modifier \"%.*s\" of variable \"%s\" with value \"%s\"", ch->endc, (int)(p - mod), mod, - ch->expr->name, ch->expr->value.str); + ch->expr->name, Expr_Str(ch->expr)); } else if (*p == ':') { p++; } else if (opts.strict && *p != '\0' && *p != ch->endc) { Parse_Error(PARSE_FATAL, "Missing delimiter ':' after modifier \"%.*s\"", (int)(p - mod), mod); /* * TODO: propagate parse error to the enclosing * expression */ } *pp = p; return AMR_OK; } #if __STDC_VERSION__ >= 199901L #define ModChain_Literal(expr, startc, endc, sep, oneBigWord) \ (ModChain) { expr, startc, endc, sep, oneBigWord } #else MAKE_INLINE ModChain ModChain_Literal(Expr *expr, char startc, char endc, char sep, bool oneBigWord) { ModChain ch; ch.expr = expr; ch.startc = startc; ch.endc = endc; ch.sep = sep; ch.oneBigWord = oneBigWord; return ch; } #endif /* Apply any modifiers (such as :Mpattern or :@var@loop@ or :Q or ::=value). */ static void ApplyModifiers( Expr *expr, const char **pp, /* the parsing position, updated upon return */ char startc, /* '(' or '{'; or '\0' for indirect modifiers */ char endc /* ')' or '}'; or '\0' for indirect modifiers */ ) { ModChain ch = ModChain_Literal(expr, startc, endc, ' ', false); const char *p; const char *mod; assert(startc == '(' || startc == '{' || startc == '\0'); assert(endc == ')' || endc == '}' || endc == '\0'); - assert(expr->value.str != NULL); + assert(Expr_Str(expr) != NULL); p = *pp; if (*p == '\0' && endc != '\0') { Error( "Unclosed variable expression (expecting '%c') for \"%s\"", ch.endc, expr->name); goto cleanup; } while (*p != '\0' && *p != endc) { ApplyModifierResult res; if (*p == '$') { ApplyModifiersIndirectResult amir = ApplyModifiersIndirect(&ch, &p); if (amir == AMIR_CONTINUE) continue; if (amir == AMIR_OUT) break; /* * It's neither '${VAR}:' nor '${VAR}}'. Try to parse * it as a SysV modifier, as that is the only modifier * that can start with '$'. */ } mod = p; res = ApplySingleModifier(&p, &ch); if (res == AMR_CLEANUP) goto cleanup; if (res == AMR_BAD) goto bad_modifier; } *pp = p; - assert(expr->value.str != NULL); /* Use var_Error or varUndefined. */ + assert(Expr_Str(expr) != NULL); /* Use var_Error or varUndefined. */ return; bad_modifier: /* XXX: The modifier end is only guessed. */ Error("Bad modifier \":%.*s\" for variable \"%s\"", (int)strcspn(mod, ":)}"), mod, expr->name); cleanup: /* * TODO: Use p + strlen(p) instead, to stop parsing immediately. * * In the unit tests, this generates a few unterminated strings in the * shell commands though. Instead of producing these unfinished * strings, commands with evaluation errors should not be run at all. * * To make that happen, Var_Subst must report the actual errors * instead of returning VPR_OK unconditionally. */ *pp = p; Expr_SetValueRefer(expr, var_Error); } /* * Only 4 of the 7 local variables are treated specially as they are the only * ones that will be set when dynamic sources are expanded. */ static bool VarnameIsDynamic(Substring varname) { const char *name; size_t len; name = varname.start; len = Substring_Length(varname); if (len == 1 || (len == 2 && (name[1] == 'F' || name[1] == 'D'))) { switch (name[0]) { case '@': case '%': case '*': case '!': return true; } return false; } if ((len == 7 || len == 8) && name[0] == '.' && ch_isupper(name[1])) { return Substring_Equals(varname, ".TARGET") || Substring_Equals(varname, ".ARCHIVE") || Substring_Equals(varname, ".PREFIX") || Substring_Equals(varname, ".MEMBER"); } return false; } static const char * UndefinedShortVarValue(char varname, const GNode *scope) { if (scope == SCOPE_CMDLINE || scope == SCOPE_GLOBAL) { /* * If substituting a local variable in a non-local scope, * assume it's for dynamic source stuff. We have to handle * this specially and return the longhand for the variable * with the dollar sign escaped so it makes it back to the * caller. Only four of the local variables are treated * specially as they are the only four that will be set * when dynamic sources are expanded. */ switch (varname) { case '@': return "$(.TARGET)"; case '%': return "$(.MEMBER)"; case '*': return "$(.PREFIX)"; case '!': return "$(.ARCHIVE)"; } } return NULL; } /* * Parse a variable name, until the end character or a colon, whichever * comes first. */ static void ParseVarname(const char **pp, char startc, char endc, GNode *scope, VarEvalMode emode, LazyBuf *buf) { const char *p = *pp; int depth = 0; /* Track depth so we can spot parse errors. */ LazyBuf_Init(buf, p); while (*p != '\0') { if ((*p == endc || *p == ':') && depth == 0) break; if (*p == startc) depth++; if (*p == endc) depth--; /* A variable inside a variable, expand. */ if (*p == '$') { FStr nested_val; (void)Var_Parse(&p, scope, emode, &nested_val); /* TODO: handle errors */ LazyBuf_AddStr(buf, nested_val.str); FStr_Done(&nested_val); } else { LazyBuf_Add(buf, *p); p++; } } *pp = p; } static VarParseResult ValidShortVarname(char varname, const char *start) { if (varname != '$' && varname != ':' && varname != '}' && varname != ')' && varname != '\0') return VPR_OK; if (!opts.strict) return VPR_ERR; /* XXX: Missing error message */ if (varname == '$') Parse_Error(PARSE_FATAL, "To escape a dollar, use \\$, not $$, at \"%s\"", start); else if (varname == '\0') Parse_Error(PARSE_FATAL, "Dollar followed by nothing"); else Parse_Error(PARSE_FATAL, "Invalid variable name '%c', at \"%s\"", varname, start); return VPR_ERR; } /* * Parse a single-character variable name such as in $V or $@. * Return whether to continue parsing. */ static bool ParseVarnameShort(char varname, const char **pp, GNode *scope, VarEvalMode emode, VarParseResult *out_false_res, const char **out_false_val, Var **out_true_var) { char name[2]; Var *v; VarParseResult vpr; vpr = ValidShortVarname(varname, *pp); if (vpr != VPR_OK) { (*pp)++; *out_false_res = vpr; *out_false_val = var_Error; return false; } name[0] = varname; name[1] = '\0'; v = VarFind(name, scope, true); if (v == NULL) { const char *val; *pp += 2; val = UndefinedShortVarValue(varname, scope); if (val == NULL) val = emode == VARE_UNDEFERR ? var_Error : varUndefined; if (opts.strict && val == var_Error) { Parse_Error(PARSE_FATAL, "Variable \"%s\" is undefined", name); *out_false_res = VPR_ERR; *out_false_val = val; return false; } /* * XXX: This looks completely wrong. * * If undefined expressions are not allowed, this should * rather be VPR_ERR instead of VPR_UNDEF, together with an * error message. * * If undefined expressions are allowed, this should rather * be VPR_UNDEF instead of VPR_OK. */ *out_false_res = emode == VARE_UNDEFERR ? VPR_UNDEF : VPR_OK; *out_false_val = val; return false; } *out_true_var = v; return true; } /* Find variables like @F or ", varname.start[0]) == NULL) return NULL; v = VarFindSubstring(Substring_Sub(varname, 0, 1), scope, false); if (v == NULL) return NULL; *out_extraModifiers = varname.start[1] == 'D' ? "H:" : "T:"; return v; } static VarParseResult EvalUndefined(bool dynamic, const char *start, const char *p, Substring varname, VarEvalMode emode, FStr *out_val) { if (dynamic) { *out_val = FStr_InitOwn(bmake_strsedup(start, p)); return VPR_OK; } if (emode == VARE_UNDEFERR && opts.strict) { Parse_Error(PARSE_FATAL, "Variable \"%.*s\" is undefined", (int)Substring_Length(varname), varname.start); *out_val = FStr_InitRefer(var_Error); return VPR_ERR; } if (emode == VARE_UNDEFERR) { *out_val = FStr_InitRefer(var_Error); return VPR_UNDEF; /* XXX: Should be VPR_ERR instead. */ } *out_val = FStr_InitRefer(varUndefined); return VPR_OK; } /* * Parse a long variable name enclosed in braces or parentheses such as $(VAR) * or ${VAR}, up to the closing brace or parenthesis, or in the case of * ${VAR:Modifiers}, up to the ':' that starts the modifiers. * Return whether to continue parsing. */ static bool ParseVarnameLong( const char **pp, char startc, GNode *scope, VarEvalMode emode, const char **out_false_pp, VarParseResult *out_false_res, FStr *out_false_val, char *out_true_endc, Var **out_true_v, bool *out_true_haveModifier, const char **out_true_extraModifiers, bool *out_true_dynamic, ExprDefined *out_true_exprDefined ) { LazyBuf varname; + Substring name; Var *v; bool haveModifier; bool dynamic = false; const char *p = *pp; const char *const start = p; char endc = startc == '(' ? ')' : '}'; p += 2; /* skip "${" or "$(" or "y(" */ ParseVarname(&p, startc, endc, scope, emode, &varname); + name = LazyBuf_Get(&varname); if (*p == ':') { haveModifier = true; } else if (*p == endc) { haveModifier = false; } else { - Substring name = LazyBuf_Get(&varname); Parse_Error(PARSE_FATAL, "Unclosed variable \"%.*s\"", (int)Substring_Length(name), name.start); LazyBuf_Done(&varname); *out_false_pp = p; *out_false_val = FStr_InitRefer(var_Error); *out_false_res = VPR_ERR; return false; } - v = VarFindSubstring(LazyBuf_Get(&varname), scope, true); + v = VarFindSubstring(name, scope, true); /* At this point, p points just after the variable name, * either at ':' or at endc. */ if (v == NULL) { - v = FindLocalLegacyVar(LazyBuf_Get(&varname), scope, - out_true_extraModifiers); + if (Substring_Equals(name, ".SUFFIXES")) + v = VarNew(Substring_Str(name), + Suff_NamesStr(), false, true); + else + v = FindLocalLegacyVar(name, scope, + out_true_extraModifiers); } if (v == NULL) { /* * Defer expansion of dynamic variables if they appear in * non-local scope since they are not defined there. */ - dynamic = VarnameIsDynamic(LazyBuf_Get(&varname)) && + dynamic = VarnameIsDynamic(name) && (scope == SCOPE_CMDLINE || scope == SCOPE_GLOBAL); if (!haveModifier) { p++; /* skip endc */ *out_false_pp = p; *out_false_res = EvalUndefined(dynamic, start, p, - LazyBuf_Get(&varname), emode, out_false_val); + name, emode, out_false_val); return false; } /* * The variable expression is based on an undefined variable. * Nevertheless it needs a Var, for modifiers that access the * variable name, such as :L or :?. * * Most modifiers leave this expression in the "undefined" * state (VES_UNDEF), only a few modifiers like :D, :U, :L, * :P turn this undefined expression into a defined * expression (VES_DEF). * * In the end, after applying all modifiers, if the expression * is still undefined, Var_Parse will return an empty string * instead of the actually computed value. */ v = VarNew(LazyBuf_DoneGet(&varname), "", false, false); *out_true_exprDefined = DEF_UNDEF; } else LazyBuf_Done(&varname); *pp = p; *out_true_endc = endc; *out_true_v = v; *out_true_haveModifier = haveModifier; *out_true_dynamic = dynamic; return true; } /* Free the environment variable now since we own it. */ static void -FreeEnvVar(Var *v, FStr *inout_val) +FreeEnvVar(Var *v, Expr *expr) { char *varValue = Buf_DoneData(&v->val); - if (inout_val->str == varValue) - inout_val->freeIt = varValue; + if (expr->value.str == varValue) + expr->value.freeIt = varValue; else free(varValue); FStr_Done(&v->name); free(v); } #if __STDC_VERSION__ >= 199901L #define Expr_Literal(name, value, emode, scope, defined) \ { name, value, emode, scope, defined } #else MAKE_INLINE Expr Expr_Literal(const char *name, FStr value, VarEvalMode emode, GNode *scope, ExprDefined defined) { Expr expr; expr.name = name; expr.value = value; expr.emode = emode; expr.scope = scope; expr.defined = defined; return expr; } #endif /* * Expressions of the form ${:U...} with a trivial value are often generated * by .for loops and are boring, therefore parse and evaluate them in a fast * lane without debug logging. */ static bool Var_Parse_FastLane(const char **pp, VarEvalMode emode, FStr *out_value) { const char *p; p = *pp; if (!(p[0] == '$' && p[1] == '{' && p[2] == ':' && p[3] == 'U')) return false; p += 4; while (*p != '$' && *p != '{' && *p != ':' && *p != '\\' && *p != '}' && *p != '\0') p++; if (*p != '}') return false; if (emode == VARE_PARSE_ONLY) *out_value = FStr_InitRefer(""); else *out_value = FStr_InitOwn(bmake_strsedup(*pp + 4, p)); *pp = p + 1; return true; } /* * Given the start of a variable expression (such as $v, $(VAR), * ${VAR:Mpattern}), extract the variable name and value, and the modifiers, * if any. While doing that, apply the modifiers to the value of the * expression, forming its final value. A few of the modifiers such as :!cmd! * or ::= have side effects. * * Input: * *pp The string to parse. - * When parsing a condition in ParseEmptyArg, it may also - * point to the "y" of "empty(VARNAME:Modifiers)", which - * is syntactically the same. + * In CondParser_FuncCallEmpty, it may also point to the + * "y" of "empty(VARNAME:Modifiers)", which is + * syntactically the same. * scope The scope for finding variables * emode Controls the exact details of parsing and evaluation * * Output: * *pp The position where to continue parsing. * TODO: After a parse error, the value of *pp is * unspecified. It may not have been updated at all, * point to some random character in the string, to the * location of the parse error, or at the end of the * string. * *out_val The value of the variable expression, never NULL. * *out_val var_Error if there was a parse error. * *out_val var_Error if the base variable of the expression was * undefined, emode is VARE_UNDEFERR, and none of * the modifiers turned the undefined expression into a * defined expression. * XXX: It is not guaranteed that an error message has * been printed. * *out_val varUndefined if the base variable of the expression * was undefined, emode was not VARE_UNDEFERR, * and none of the modifiers turned the undefined * expression into a defined expression. * XXX: It is not guaranteed that an error message has * been printed. */ VarParseResult Var_Parse(const char **pp, GNode *scope, VarEvalMode emode, FStr *out_val) { const char *p = *pp; const char *const start = p; /* true if have modifiers for the variable. */ bool haveModifier; /* Starting character if variable in parens or braces. */ char startc; /* Ending character if variable in parens or braces. */ char endc; /* * true if the variable is local and we're expanding it in a * non-local scope. This is done to support dynamic sources. * The result is just the expression, unaltered. */ bool dynamic; const char *extramodifiers; Var *v; Expr expr = Expr_Literal(NULL, FStr_InitRefer(NULL), emode, scope, DEF_REGULAR); if (Var_Parse_FastLane(pp, emode, out_val)) return VPR_OK; DEBUG2(VAR, "Var_Parse: %s (%s)\n", start, VarEvalMode_Name[emode]); *out_val = FStr_InitRefer(NULL); extramodifiers = NULL; /* extra modifiers to apply first */ dynamic = false; /* * Appease GCC, which thinks that the variable might not be * initialized. */ endc = '\0'; startc = p[1]; if (startc != '(' && startc != '{') { VarParseResult res; if (!ParseVarnameShort(startc, pp, scope, emode, &res, &out_val->str, &v)) return res; haveModifier = false; p++; } else { VarParseResult res; if (!ParseVarnameLong(&p, startc, scope, emode, pp, &res, out_val, &endc, &v, &haveModifier, &extramodifiers, &dynamic, &expr.defined)) return res; } expr.name = v->name.str; if (v->inUse) Fatal("Variable %s is recursive.", v->name.str); /* * XXX: This assignment creates an alias to the current value of the * variable. This means that as long as the value of the expression * stays the same, the value of the variable must not change. * Using the '::=' modifier, it could be possible to do exactly this. * At the bottom of this function, the resulting value is compared to * the then-current value of the variable. This might also invoke * undefined behavior. */ expr.value = FStr_InitRefer(v->val.data); /* * Before applying any modifiers, expand any nested expressions from * the variable value. */ - if (strchr(expr.value.str, '$') != NULL && + if (strchr(Expr_Str(&expr), '$') != NULL && VarEvalMode_ShouldEval(emode)) { char *expanded; VarEvalMode nested_emode = emode; if (opts.strict) nested_emode = VarEvalMode_UndefOk(nested_emode); v->inUse = true; - (void)Var_Subst(expr.value.str, scope, nested_emode, + (void)Var_Subst(Expr_Str(&expr), scope, nested_emode, &expanded); v->inUse = false; /* TODO: handle errors */ Expr_SetValueOwn(&expr, expanded); } if (extramodifiers != NULL) { const char *em = extramodifiers; ApplyModifiers(&expr, &em, '\0', '\0'); } if (haveModifier) { p++; /* Skip initial colon. */ ApplyModifiers(&expr, &p, startc, endc); } if (*p != '\0') /* Skip past endc if possible. */ p++; *pp = p; if (v->fromEnv) { - FreeEnvVar(v, &expr.value); + FreeEnvVar(v, &expr); } else if (expr.defined != DEF_REGULAR) { if (expr.defined == DEF_UNDEF) { if (dynamic) { Expr_SetValueOwn(&expr, bmake_strsedup(start, p)); } else { /* * The expression is still undefined, * therefore discard the actual value and * return an error marker instead. */ Expr_SetValueRefer(&expr, emode == VARE_UNDEFERR ? var_Error : varUndefined); } } /* XXX: This is not standard memory management. */ if (expr.value.str != v->val.data) Buf_Done(&v->val); FStr_Done(&v->name); free(v); } *out_val = expr.value; return VPR_OK; /* XXX: Is not correct in all cases */ } static void VarSubstDollarDollar(const char **pp, Buffer *res, VarEvalMode emode) { /* A dollar sign may be escaped with another dollar sign. */ if (save_dollars && VarEvalMode_ShouldKeepDollar(emode)) Buf_AddByte(res, '$'); Buf_AddByte(res, '$'); *pp += 2; } static void VarSubstExpr(const char **pp, Buffer *buf, GNode *scope, VarEvalMode emode, bool *inout_errorReported) { const char *p = *pp; const char *nested_p = p; FStr val; (void)Var_Parse(&nested_p, scope, emode, &val); /* TODO: handle errors */ if (val.str == var_Error || val.str == varUndefined) { if (!VarEvalMode_ShouldKeepUndef(emode)) { p = nested_p; } else if (emode == VARE_UNDEFERR || val.str == var_Error) { /* * XXX: This condition is wrong. If val == var_Error, * this doesn't necessarily mean there was an undefined * variable. It could equally well be a parse error; * see unit-tests/varmod-order.exp. */ /* * If variable is undefined, complain and skip the * variable. The complaint will stop us from doing * anything when the file is parsed. */ if (!*inout_errorReported) { Parse_Error(PARSE_FATAL, "Undefined variable \"%.*s\"", (int)(size_t)(nested_p - p), p); } p = nested_p; *inout_errorReported = true; } else { /* Copy the initial '$' of the undefined expression, * thereby deferring expansion of the expression, but * expand nested expressions if already possible. * See unit-tests/varparse-undef-partial.mk. */ Buf_AddByte(buf, *p); p++; } } else { p = nested_p; Buf_AddStr(buf, val.str); } FStr_Done(&val); *pp = p; } /* * Skip as many characters as possible -- either to the end of the string * or to the next dollar sign (variable expression). */ static void VarSubstPlain(const char **pp, Buffer *res) { const char *p = *pp; const char *start = p; for (p++; *p != '$' && *p != '\0'; p++) continue; Buf_AddBytesBetween(res, start, p); *pp = p; } /* * Expand all variable expressions like $V, ${VAR}, $(VAR:Modifiers) in the * given string. * * Input: * str The string in which the variable expressions are * expanded. * scope The scope in which to start searching for * variables. The other scopes are searched as well. * emode The mode for parsing or evaluating subexpressions. */ VarParseResult Var_Subst(const char *str, GNode *scope, VarEvalMode emode, char **out_res) { const char *p = str; Buffer res; /* Set true if an error has already been reported, * to prevent a plethora of messages when recursing */ /* XXX: Why is the 'static' necessary here? */ static bool errorReported; Buf_Init(&res); errorReported = false; while (*p != '\0') { if (p[0] == '$' && p[1] == '$') VarSubstDollarDollar(&p, &res, emode); else if (p[0] == '$') VarSubstExpr(&p, &res, scope, emode, &errorReported); else VarSubstPlain(&p, &res); } *out_res = Buf_DoneDataCompact(&res); return VPR_OK; } /* Initialize the variables module. */ void Var_Init(void) { SCOPE_INTERNAL = GNode_New("Internal"); SCOPE_GLOBAL = GNode_New("Global"); SCOPE_CMDLINE = GNode_New("Command"); } /* Clean up the variables module. */ void Var_End(void) { Var_Stats(); } void Var_Stats(void) { HashTable_DebugStats(&SCOPE_GLOBAL->vars, "Global variables"); } +static int +StrAsc(const void *sa, const void *sb) +{ + return strcmp( + *((const char *const *)sa), *((const char *const *)sb)); +} + + /* Print all variables in a scope, sorted by name. */ void Var_Dump(GNode *scope) { Vector /* of const char * */ vec; HashIter hi; size_t i; const char **varnames; Vector_Init(&vec, sizeof(const char *)); HashIter_Init(&hi, &scope->vars); while (HashIter_Next(&hi) != NULL) *(const char **)Vector_Push(&vec) = hi.entry->key; varnames = vec.items; - qsort(varnames, vec.len, sizeof varnames[0], str_cmp_asc); + qsort(varnames, vec.len, sizeof varnames[0], StrAsc); for (i = 0; i < vec.len; i++) { const char *varname = varnames[i]; Var *var = HashTable_FindValue(&scope->vars, varname); debug_printf("%-16s = %s\n", varname, var->val.data); } Vector_Done(&vec); }