diff --git a/etc/rc b/etc/rc index bc2e6f906cff..a94d923cf24d 100644 --- a/etc/rc +++ b/etc/rc @@ -1,83 +1,115 @@ #!/bin/sh # # Copyright (c) 2000-2004 The FreeBSD Project # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # @(#)rc 5.27 (Berkeley) 6/5/91 # $FreeBSD$ # # System startup script run by init on autoboot # or after single-user. # Output and error are redirected to console by init, # and the console is the controlling terminal. # Note that almost all of the user-configurable behavior is no longer in # this file, but rather in /etc/defaults/rc.conf. Please check that file # first before contemplating any changes here. If you do need to change # this file for some reason, we would like to know about it. stty status '^T' # Set shell to ignore SIGINT (2), but not children; # shell catches SIGQUIT (3) and returns to single user. # trap : 2 trap "echo 'Boot interrupted'; exit 1" 3 HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin export HOME PATH . /etc/rc.subr # Note: the system configuration files are loaded as part of -# the RCNG system (rc.d/rcconf.sh). Do not load them here as it may +# the rc.d system (rc.d/rcconf.sh). Do not load them here as it may # interfere with diskless booting. # if [ "$1" = autoboot ]; then autoboot=yes _boot="faststart" rc_fast=yes # run_rc_command(): do fast booting else autoboot=no _boot="start" fi dlv=`/sbin/sysctl -n vfs.nfs.diskless_valid 2> /dev/null` if [ ${dlv:=0} -ne 0 -o -f /etc/diskless ]; then sh /etc/rc.initdiskless fi skip="-s nostart" [ `/sbin/sysctl -n security.jail.jailed` -eq 1 ] && skip="$skip -s nojail" + +# Do a first pass to get everything up to mountcritremote so that +# we can do a second pass that includes $local_startup directories +# files=`rcorder ${skip} /etc/rc.d/* 2>/dev/null` for _rc_elem in ${files}; do run_rc_script ${_rc_elem} ${_boot} + + case "$_rc_elem" in + */mountcritremote) break ;; + esac +done + +unset files local_rc + +# Now that disks are mounted, for each dir in $local_startup +# search for init scripts that use the new rc.d semantics. +# +case ${local_startup} in +[Nn][Oo] | '') ;; +*) find_local_scripts_new ;; +esac + +files=`rcorder ${skip} /etc/rc.d/* ${local_rc} 2>/dev/null` +_skip_early=1 +for _rc_elem in ${files}; do + case "$_skip_early" in + 1) case "$_rc_elem" in + */mountcritremote) _skip_early=0 ;; + esac + continue + ;; + esac + + run_rc_script ${_rc_elem} ${_boot} done echo '' date exit 0 diff --git a/etc/rc.d/localpkg b/etc/rc.d/localpkg index c4ade879024b..0eba5239fa1c 100644 --- a/etc/rc.d/localpkg +++ b/etc/rc.d/localpkg @@ -1,89 +1,62 @@ #!/bin/sh # # $FreeBSD$ # # PROVIDE: localpkg # REQUIRE: abi # BEFORE: securelevel # KEYWORD: shutdown . /etc/rc.subr name="localpkg" start_cmd="pkg_start" stop_cmd="pkg_stop" pkg_start() { # For each dir in $local_startup, search for init scripts matching *.sh # case ${local_startup} in [Nn][Oo] | '') ;; *) echo -n 'Local package initialization:' - slist="" - if [ -z "${script_name_sep}" ]; then - script_name_sep=" " - fi - for dir in ${local_startup}; do - if [ -d "${dir}" ]; then - for script in ${dir}/*.sh; do - slist="${slist}${script_name_sep}${script}" - done - fi - done - script_save_sep="$IFS" - IFS="${script_name_sep}" - for script in ${slist}; do + find_local_scripts_old + for script in ${zlist} ${slist}; do if [ -x "${script}" ]; then (set -T trap 'exit 1' 2 ${script} start) elif [ -f "${script}" -o -L "${script}" ]; then - echo -n " (skipping ${script##*/}, not executable)" + echo -n " (skipping ${script}, not executable)" fi done - IFS="${script_save_sep}" echo '.' ;; esac } pkg_stop() { - # For each dir in $local_startup, search for init scripts matching *.sh case ${local_startup} in [Nn][Oo] | '') ;; *) echo -n 'Shutting down daemon processes:' - slist="" - if [ -z "${script_name_sep}" ]; then - script_name_sep=" " - fi - for dir in ${local_startup}; do - if [ -d "${dir}" ]; then - for script in ${dir}/*.sh; do - slist="${slist}${script_name_sep}${script}" - done - fi - done - script_save_sep="$IFS" - IFS="${script_name_sep}" - for script in `reverse_list ${slist}`; do + find_local_scripts_old + for script in `reverse_list ${slist} ${zlist}`; do if [ -x "${script}" ]; then (set -T trap 'exit 1' 2 ${script} stop) fi done - IFS="${script_save_sep}" echo '.' ;; esac } load_rc_config $name run_rc_command "$1" diff --git a/etc/rc.shutdown b/etc/rc.shutdown index 075881f3d4f4..ebe79d74132b 100644 --- a/etc/rc.shutdown +++ b/etc/rc.shutdown @@ -1,102 +1,108 @@ #!/bin/sh # # Copyright (c) 1997 Ollivier Robert # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # # Site-specific closing actions for daemons run by init on shutdown, # or before going single-user from multi-user. # Output and errors are directed to console by init, and the # console is the controlling terminal. stty status '^T' # Set shell to ignore SIGINT (2), but not children; # shell catches SIGQUIT (3) and returns to single user after fsck. trap : 2 trap : 3 # shouldn't be needed HOME=/ PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin export HOME PATH . /etc/rc.subr load_rc_config 'XXX' # reverse_list list # print the list in reverse order # reverse_list() { _revlist= for _revfile in $*; do _revlist="$_revfile${script_name_sep}$_revlist" done echo $_revlist } # If requested, start a watchdog timer in the background which # will terminate rc.shutdown if rc.shutdown doesn't complete # within the specified time. # _rcshutdown_watchdog= if [ -n "$rcshutdown_timeout" ]; then debug "Initiating watchdog timer." sleep $rcshutdown_timeout && ( _msg="$rcshutdown_timeout second watchdog" _msg="$_msg timeout expired. Shutdown terminated." logger -t rc.shutdown "$_msg" echo "$_msg" date kill -KILL $$ >/dev/null 2>&1 ) & _rcshutdown_watchdog=$! fi # Determine the shutdown order of the /etc/rc.d scripts, # and perform the operation # rcorder_opts="-k shutdown" [ `/sbin/sysctl -n security.jail.jailed` -eq 1 ] && rcorder_opts="$rcorder_opts -s nojail" -files=`rcorder ${rcorder_opts} /etc/rc.d/* 2>/dev/null` + +case ${local_startup} in +[Nn][Oo] | '') ;; +*) find_local_scripts_new ;; +esac + +files=`rcorder ${rcorder_opts} /etc/rc.d/* ${local_rc} 2>/dev/null` for _rc_elem in `reverse_list $files`; do debug "run_rc_script $_rc_elem faststop" run_rc_script $_rc_elem faststop done # Terminate the background watchdog timer (if it is running) # if [ -n "$_rcshutdown_watchdog" ]; then kill -TERM $_rcshutdown_watchdog >/dev/null 2>&1 fi # Insert other shutdown procedures here echo '.' exit 0 diff --git a/etc/rc.subr b/etc/rc.subr index ff88433c5e58..d3d52b71968a 100644 --- a/etc/rc.subr +++ b/etc/rc.subr @@ -1,1358 +1,1396 @@ # $NetBSD: rc.subr,v 1.60 2003/07/26 05:13:47 lukem Exp $ # $FreeBSD$ # # Copyright (c) 1997-2002 The NetBSD Foundation, Inc. # All rights reserved. # # This code is derived from software contributed to The NetBSD Foundation # by Luke Mewburn. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. All advertising materials mentioning features or use of this software # must display the following acknowledgement: # This product includes software developed by the NetBSD # Foundation, Inc. and its contributors. # 4. Neither the name of The NetBSD Foundation nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR # PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # rc.subr # functions used by various rc scripts # # # Operating System dependent/independent variables # if [ -z "${_rc_subr_loaded}" ]; then _rc_subr_loaded="YES" SYSCTL="/sbin/sysctl" SYSCTL_N="${SYSCTL} -n" CMD_OSTYPE="${SYSCTL_N} kern.ostype" OSTYPE=`${CMD_OSTYPE}` ID="/usr/bin/id" IDCMD="if [ -x $ID ]; then $ID -un; fi" case ${OSTYPE} in FreeBSD) SYSCTL_W="${SYSCTL}" ;; NetBSD) SYSCTL_W="${SYSCTL} -w" ;; esac # # functions # --------- # # set_rcvar base_var # Set the variable name enabling a specific service. # FreeBSD uses ${service}_enable, while NetBSD uses # just the name of the service. For example: # FreeBSD: sendmail_enable="YES" # NetBSD : sendmail="YES" # $1 - if $name is not the base to work of off, specify # a different one # set_rcvar() { if [ -z "$1" ]; then base_var=${name} else base_var="$1" fi case ${OSTYPE} in FreeBSD) echo ${base_var}_enable ;; NetBSD) echo ${base_var} ;; *) echo 'XXX' ;; esac } # # force_depend script # Force a service to start. Intended for use by services # to resolve dependency issues. It is assumed the caller # has check to make sure this call is necessary # $1 - filename of script, in /etc/rc.d, to run # force_depend() { _depend="$1" info "${name} depends on ${_depend}, which will be forced to start." if ! /etc/rc.d/${_depend} forcestart; then warn "Unable to force ${_depend}. It may already be running." return 1 fi return 0 } # # checkyesno var # Test $1 variable, and warn if not set to YES or NO. # Return 0 if it's "yes" (et al), nonzero otherwise. # checkyesno() { eval _value=\$${1} debug "checkyesno: $1 is set to $_value." case $_value in # "yes", "true", "on", or "1" [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) return 0 ;; # "no", "false", "off", or "0" [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0) return 1 ;; *) warn "\$${1} is not set properly - see rc.conf(5)." return 1 ;; esac } # reverse_list list # print the list in reverse order # reverse_list() { _revlist= for _revfile; do _revlist="$_revfile $_revlist" done echo $_revlist } # # mount_critical_filesystems type # Go through the list of critical filesystems as provided in # the rc.conf(5) variable $critical_filesystems_${type}, checking # each one to see if it is mounted, and if it is not, mounting it. # mount_critical_filesystems() { eval _fslist=\$critical_filesystems_${1} for _fs in $_fslist; do mount | ( _ismounted=false while read what _on on _type type; do if [ $on = $_fs ]; then _ismounted=true fi done if $_ismounted; then : else mount $_fs >/dev/null 2>&1 fi ) done } # # check_pidfile pidfile procname [interpreter] # Parses the first line of pidfile for a PID, and ensures # that the process is running and matches procname. # Prints the matching PID upon success, nothing otherwise. # interpreter is optional; see _find_processes() for details. # check_pidfile() { _pidfile=$1 _procname=$2 _interpreter=$3 if [ -z "$_pidfile" -o -z "$_procname" ]; then err 3 'USAGE: check_pidfile pidfile procname [interpreter]' fi if [ ! -f $_pidfile ]; then debug "pid file ($_pidfile): not readable." return fi read _pid _junk < $_pidfile if [ -z "$_pid" ]; then debug "pid file ($_pidfile): no pid in file." return fi _find_processes $_procname ${_interpreter:-.} '-p '"$_pid" } # # check_process procname [interpreter] # Ensures that a process (or processes) named procname is running. # Prints a list of matching PIDs. # interpreter is optional; see _find_processes() for details. # check_process() { _procname=$1 _interpreter=$2 if [ -z "$_procname" ]; then err 3 'USAGE: check_process procname [interpreter]' fi _find_processes $_procname ${_interpreter:-.} '-ax' } # # _find_processes procname interpreter psargs # Search for procname in the output of ps generated by psargs. # Prints the PIDs of any matching processes, space separated. # # If interpreter == ".", check the following variations of procname # against the first word of each command: # procname # `basename procname` # `basename procname` + ":" # "(" + `basename procname` + ")" # # If interpreter != ".", read the first line of procname, remove the # leading #!, normalise whitespace, append procname, and attempt to # match that against each command, either as is, or with extra words # at the end. # _find_processes() { if [ $# -ne 3 ]; then err 3 'USAGE: _find_processes procname interpreter psargs' fi _procname=$1 _interpreter=$2 _psargs=$3 _pref= if [ $_interpreter != "." ]; then # an interpreted script read _interp < $_procname # read interpreter name _interp=${_interp#\#!} # strip #! set -- $_interp if [ $_interpreter != $1 ]; then warn "\$command_interpreter $_interpreter != $1" fi _interp="$* $_procname" # cleanup spaces, add _procname _fp_args='_argv' _fp_match='case "$_argv" in ${_interp}|"${_interp} "*)' else # a normal daemon _procnamebn=${_procname##*/} _fp_args='_arg0 _argv' _fp_match='case "$_arg0" in $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")' fi _proccheck=' ps 2>/dev/null -o "pid,command" '"$_psargs"' | while read _npid '"$_fp_args"'; do case "$_npid" in PID) continue;; esac; '"$_fp_match"' echo -n "$_pref$_npid"; _pref=" " ;; esac done' # debug "in _find_processes: proccheck is ($_proccheck)." eval $_proccheck } # # wait_for_pids pid [pid ...] # spins until none of the pids exist # wait_for_pids() { _list="$@" if [ -z "$_list" ]; then return fi _prefix= while true; do _nlist=""; for _j in $_list; do if kill -0 $_j 2>/dev/null; then _nlist="${_nlist}${_nlist:+ }$_j" fi done if [ -z "$_nlist" ]; then break fi _list=$_nlist echo -n ${_prefix:-"Waiting for PIDS: "}$_list _prefix=", " sleep 2 done if [ -n "$_prefix" ]; then echo "." fi } # # run_rc_command argument # Search for argument in the list of supported commands, which is: # "start stop restart rcvar status poll ${extra_commands}" # If there's a match, run ${argument}_cmd or the default method # (see below). # # If argument has a given prefix, then change the operation as follows: # Prefix Operation # ------ --------- # fast Skip the pid check, and set rc_fast=yes # force Set ${rcvar} to YES, and set rc_force=yes # one Set ${rcvar} to YES # # The following globals are used: # # Name Needed Purpose # ---- ------ ------- # name y Name of script. # # command n Full path to command. # Not needed if ${rc_arg}_cmd is set for # each keyword. # # command_args n Optional args/shell directives for command. # # command_interpreter n If not empty, command is interpreted, so # call check_{pidfile,process}() appropriately. # # extra_commands n List of extra commands supported. # # pidfile n If set, use check_pidfile $pidfile $command, # otherwise use check_process $command. # In either case, only check if $command is set. # # procname n Process name to check for instead of $command. # # rcvar n This is checked with checkyesno to determine # if the action should be run. # # ${name}_chroot n Directory to chroot to before running ${command} # Requires /usr to be mounted. # # ${name}_chdir n Directory to cd to before running ${command} # (if not using ${name}_chroot). # # ${name}_flags n Arguments to call ${command} with. # NOTE: $flags from the parent environment # can be used to override this. # # ${name}_nice n Nice level to run ${command} at. # # ${name}_user n User to run ${command} as, using su(1) if not # using ${name}_chroot. # Requires /usr to be mounted. # # ${name}_group n Group to run chrooted ${command} as. # Requires /usr to be mounted. # # ${name}_groups n Comma separated list of supplementary groups # to run the chrooted ${command} with. # Requires /usr to be mounted. # # ${rc_arg}_cmd n If set, use this as the method when invoked; # Otherwise, use default command (see below) # # ${rc_arg}_precmd n If set, run just before performing the # ${rc_arg}_cmd method in the default # operation (i.e, after checking for required # bits and process (non)existence). # If this completes with a non-zero exit code, # don't run ${rc_arg}_cmd. # # ${rc_arg}_postcmd n If set, run just after performing the # ${rc_arg}_cmd method, if that method # returned a zero exit code. # # required_dirs n If set, check for the existence of the given # directories before running the default # (re)start command. # # required_files n If set, check for the readability of the given # files before running the default (re)start # command. # # required_vars n If set, perform checkyesno on each of the # listed variables before running the default # (re)start command. # # Default behaviour for a given argument, if no override method is # provided: # # Argument Default behaviour # -------- ----------------- # start if !running && checkyesno ${rcvar} # ${command} # # stop if ${pidfile} # rc_pid=$(check_pidfile $pidfile $command) # else # rc_pid=$(check_process $command) # kill $sig_stop $rc_pid # wait_for_pids $rc_pid # ($sig_stop defaults to TERM.) # # reload Similar to stop, except use $sig_reload instead, # and doesn't wait_for_pids. # $sig_reload defaults to HUP. # Note that `reload' isn't provided by default, # it should be enabled via $extra_commands. # # restart Run `stop' then `start'. # # status Show if ${command} is running, etc. # # poll Wait for ${command} to exit. # # rcvar Display what rc.conf variable is used (if any). # # Variables available to methods, and after run_rc_command() has # completed: # # Variable Purpose # -------- ------- # rc_arg Argument to command, after fast/force/one processing # performed # # rc_flags Flags to start the default command with. # Defaults to ${name}_flags, unless overridden # by $flags from the environment. # This variable may be changed by the precmd method. # # rc_pid PID of command (if appropriate) # # rc_fast Not empty if "fast" was provided (q.v.) # # rc_force Not empty if "force" was provided (q.v.) # # run_rc_command() { _return=0 rc_arg=$1 if [ -z "$name" ]; then err 3 'run_rc_command: $name is not set.' fi # Don't repeat the first argument when passing additional command- # line arguments to the command subroutines. # shift 1 rc_extra_args="$*" _rc_prefix= case "$rc_arg" in fast*) # "fast" prefix; don't check pid rc_arg=${rc_arg#fast} rc_fast=yes ;; force*) # "force prefix; always run rc_force=yes _rc_prefix=force rc_arg=${rc_arg#${_rc_prefix}} if [ -n "${rcvar}" ]; then eval ${rcvar}=YES fi ;; one*) # "one" prefix; set ${rcvar}=yes _rc_prefix=one rc_arg=${rc_arg#${_rc_prefix}} if [ -n "${rcvar}" ]; then eval ${rcvar}=YES fi ;; esac eval _overide_command=\$${name}_program command=${command:+${_overide_command:-$command}} _keywords="start stop restart rcvar $extra_commands" rc_pid= _pidcmd= _procname=${procname:-${command}} # setup pid check command if [ -n "$_procname" ]; then if [ -n "$pidfile" ]; then _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')' else _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')' fi if [ -n "$_pidcmd" ]; then _keywords="${_keywords} status poll" fi fi if [ -z "$rc_arg" ]; then rc_usage $_keywords fi if [ -n "$flags" ]; then # allow override from environment rc_flags=$flags else eval rc_flags=\$${name}_flags fi eval _chdir=\$${name}_chdir _chroot=\$${name}_chroot \ _nice=\$${name}_nice _user=\$${name}_user \ _group=\$${name}_group _groups=\$${name}_groups if [ -n "$_user" ]; then # unset $_user if running as that user if [ "$_user" = "$(eval $IDCMD)" ]; then unset _user fi fi # if ${rcvar} is set, and $1 is not # "rcvar", then run # checkyesno ${rcvar} # and return if that failed # if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" ]; then if ! checkyesno ${rcvar}; then return 0 fi fi eval $_pidcmd # determine the pid if necessary for _elem in $_keywords; do if [ "$_elem" != "$rc_arg" ]; then continue fi # if there's a custom ${XXX_cmd}, # run that instead of the default # eval _cmd=\$${rc_arg}_cmd _precmd=\$${rc_arg}_precmd \ _postcmd=\$${rc_arg}_postcmd if [ -n "$_cmd" ]; then # if the precmd failed and force # isn't set, exit # if [ -n "$_precmd" ]; then debug "run_rc_command: evaluating ${_precmd}()." eval $_precmd $rc_extra_args _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 fi if [ -n "$_cmd" ]; then debug "run_rc_command: evaluating ${_cmd}()." eval $_cmd $rc_extra_args _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 fi if [ -n "$_postcmd" ]; then debug "run_rc_command: evaluating ${_postcmd}()." eval $_postcmd $rc_extra_args _return=$? fi return $_return fi case "$rc_arg" in # default operations... status) if [ -n "$rc_pid" ]; then echo "${name} is running as pid $rc_pid." else echo "${name} is not running." return 1 fi ;; start) if [ -z "$rc_fast" -a -n "$rc_pid" ]; then echo "${name} already running? (pid=$rc_pid)." exit 1 fi if [ ! -x ${_chroot}${command} ]; then info "run_rc_command: cannot run ($command)." return 0 fi # check for required variables, # directories, and files # for _f in $required_vars; do if ! checkyesno $_f; then warn "\$${_f} is not set." if [ -z "$rc_force" ]; then return 1 fi fi done for _f in $required_dirs; do if [ ! -d "${_f}/." ]; then warn "${_f} is not a directory." if [ -z "$rc_force" ]; then return 1 fi fi done for _f in $required_files; do if [ ! -r "${_f}" ]; then warn "${_f} is not readable." if [ -z "$rc_force" ]; then return 1 fi fi done # if the precmd failed and force # isn't set, exit # if [ -n "${_precmd}" ]; then debug "run_rc_command: evaluating ${_precmd}()." eval $_precmd _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 fi # setup the command to run, and run it # echo "Starting ${name}." if [ -n "$_chroot" ]; then _doit="\ ${_nice:+nice -n $_nice }\ chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\ $_chroot $command $rc_flags $command_args" else _doit="\ ${_chdir:+cd $_chdir; }\ ${_nice:+nice -n $_nice }\ $command $rc_flags $command_args" if [ -n "$_user" ]; then _doit="su -m $_user -c 'sh -c \"$_doit\"'" fi fi # if the cmd failed and force # isn't set, exit # debug "run_rc_command: _doit: $_doit" eval $_doit _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 # finally, run postcmd # if [ -n "${_postcmd}" ]; then debug "run_rc_command: evaluating ${_postcmd}()." eval $_postcmd fi ;; stop) if [ -z "$rc_pid" ]; then [ -n "$rc_fast" ] && exit 0 if [ -n "$pidfile" ]; then echo \ "${name} not running? (check $pidfile)." else echo "${name} not running?" fi exit 1 fi # if the precmd failed and force # isn't set, exit # if [ -n "$_precmd" ]; then eval $_precmd _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 fi # send the signal to stop # echo "Stopping ${name}." _doit="kill -${sig_stop:-TERM} $rc_pid" if [ -n "$_user" ]; then _doit="su -m $_user -c 'sh -c \"$_doit\"'" fi # if the stop cmd failed and force # isn't set, exit # eval $_doit _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 # wait for the command to exit, # and run postcmd. wait_for_pids $rc_pid if [ -n "$_postcmd" ]; then eval $_postcmd _return=$? fi ;; reload) if [ -z "$rc_pid" ]; then if [ -n "$pidfile" ]; then echo \ "${name} not running? (check $pidfile)." else echo "${name} not running?" fi exit 1 fi echo "Reloading ${name} config files." if [ -n "$_precmd" ]; then eval $_precmd _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 fi _doit="kill -${sig_reload:-HUP} $rc_pid" if [ -n "$_user" ]; then _doit="su -m $_user -c 'sh -c \"$_doit\"'" fi eval $_doit _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 if [ -n "$_postcmd" ]; then eval $_postcmd _return=$? fi ;; restart) if [ -n "$_precmd" ]; then eval $_precmd $rc_extra_args _return=$? [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1 fi # prevent restart being called more # than once by any given script # if ${_rc_restart_done:-false}; then return 0 fi _rc_restart_done=true # run stop in a subshell to keep variables for start ( run_rc_command ${_rc_prefix}stop $rc_extra_args ) run_rc_command ${_rc_prefix}start $rc_extra_args if [ -n "$_postcmd" ]; then eval $_postcmd $rc_extra_args _return=$? fi ;; poll) if [ -n "$rc_pid" ]; then wait_for_pids $rc_pid fi ;; rcvar) echo "# $name" if [ -n "$rcvar" ]; then if checkyesno ${rcvar}; then echo "\$${rcvar}=YES" else echo "\$${rcvar}=NO" fi fi ;; *) rc_usage $_keywords ;; esac return $_return done echo 1>&2 "$0: unknown directive '$rc_arg'." rc_usage $_keywords exit 1 } # # run_rc_script file arg # Start the script `file' with `arg', and correctly handle the # return value from the script. If `file' ends with `.sh', it's # sourced into the current environment. If `file' appears to be # a backup or scratch file, ignore it. Otherwise if it's # executable run as a child process. # run_rc_script() { _file=$1 _arg=$2 if [ -z "$_file" -o -z "$_arg" ]; then err 3 'USAGE: run_rc_script file arg' fi unset name command command_args command_interpreter \ extra_commands pidfile procname \ rcvar required_dirs required_files required_vars eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd case "$_file" in *.sh) # run in current shell set $_arg; . $_file ;; *[~#]|*.OLD|*.orig|*,v) # scratch file; skip warn "Ignoring scratch file $_file" ;; *) # run in subshell if [ -x $_file ]; then if [ -n "$rc_fast_and_loose" ]; then set $_arg; . $_file else ( trap "echo Script $_file interrupted; kill -QUIT $$" 3 trap "echo Script $_file interrupted; exit 1" 2 set $_arg; . $_file ) fi fi ;; esac } # # load_rc_config # Source in the configuration file for a given command. # load_rc_config() { _command=$1 if [ -z "$_command" ]; then err 3 'USAGE: load_rc_config command' fi if ${_rc_conf_loaded:-false}; then : else if [ -r /etc/defaults/rc.conf ]; then debug "Sourcing /etc/defaults/rc.conf" . /etc/defaults/rc.conf source_rc_confs elif [ -r /etc/rc.conf ]; then debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)." . /etc/rc.conf fi _rc_conf_loaded=true fi if [ -f /etc/rc.conf.d/"$_command" ]; then debug "Sourcing /etc/rc.conf.d/${_command}" . /etc/rc.conf.d/"$_command" fi # XXX - Deprecated variable name support # case ${OSTYPE} in FreeBSD) [ -n "$portmap_enable" ] && rpcbind_enable="$portmap_enable" [ -n "$portmap_program" ] && rpcbind_program="$portmap_program" [ -n "$portmap_flags" ] && rpcbind_flags="$portmap_flags" [ -n "$single_mountd_enable" ] && mountd_enable="$single_mountd_enable" [ -n "$xntpd_enable" ] && ntpd_enable="$xntpd_enable" [ -n "$xntpd_program" ] && ntpd_program="$xntpd_program" [ -n "$xntpd_flags" ] && ntpd_flags="$xntpd_flags" [ -n "$dhcp_program" ] && dhclient_program="$dhcp_program" [ -n "$dhcp_flags" ] && dhclient_flags="$dhcp_flags" ;; esac } # # rc_usage commands # Print a usage string for $0, with `commands' being a list of # valid commands. # rc_usage() { echo -n 1>&2 "Usage: $0 [fast|force|one](" _sep= for _elem; do echo -n 1>&2 "$_sep$_elem" _sep="|" done echo 1>&2 ")" exit 1 } # # err exitval message # Display message to stderr and log to the syslog, and exit with exitval. # err() { exitval=$1 shift if [ -x /usr/bin/logger ]; then logger "$0: ERROR: $*" fi echo 1>&2 "$0: ERROR: $*" exit $exitval } # # warn message # Display message to stderr and log to the syslog. # warn() { if [ -x /usr/bin/logger ]; then logger "$0: WARNING: $*" fi echo 1>&2 "$0: WARNING: $*" } # # info message # Display informational message to stdout and log to syslog. # info() { case ${rc_info} in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) if [ -x /usr/bin/logger ]; then logger "$0: INFO: $*" fi echo "$0: INFO: $*" ;; esac } # # debug message # If debugging is enabled in rc.conf output message to stderr. # BEWARE that you don't call any subroutine that itself calls this # function. # debug() { case ${rc_debug} in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) if [ -x /usr/bin/logger ]; then logger "$0: INFO: $*" fi echo 1>&2 "$0: DEBUG: $*" ;; esac } # # backup_file action file cur backup # Make a backup copy of `file' into `cur', and save the previous # version of `cur' as `backup' or use rcs for archiving. # # This routine checks the value of the backup_uses_rcs variable, # which can be either YES or NO. # # The `action' keyword can be one of the following: # # add `file' is now being backed up (and is possibly # being reentered into the backups system). `cur' # is created and RCS files, if necessary, are # created as well. # # update `file' has changed and needs to be backed up. # If `cur' exists, it is copied to to `back' or # checked into RCS (if the repository file is old), # and then `file' is copied to `cur'. Another RCS # check in done here if RCS is being used. # # remove `file' is no longer being tracked by the backups # system. If RCS is not being used, `cur' is moved # to `back', otherwise an empty file is checked in, # and then `cur' is removed. # # backup_file() { _action=$1 _file=$2 _cur=$3 _back=$4 if checkyesno backup_uses_rcs; then _msg0="backup archive" _msg1="update" # ensure that history file is not locked if [ -f $_cur,v ]; then rcs -q -u -U -M $_cur fi # ensure after switching to rcs that the # current backup is not lost if [ -f $_cur ]; then # no archive, or current newer than archive if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur rcs -q -kb -U $_cur co -q -f -u $_cur fi fi case $_action in add|update) cp -p $_file $_cur ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur rcs -q -kb -U $_cur co -q -f -u $_cur chown root:wheel $_cur $_cur,v ;; remove) cp /dev/null $_cur ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur rcs -q -kb -U $_cur chown root:wheel $_cur $_cur,v rm $_cur ;; esac else case $_action in add|update) if [ -f $_cur ]; then cp -p $_cur $_back fi cp -p $_file $_cur chown root:wheel $_cur ;; remove) mv -f $_cur $_back ;; esac fi } # make_symlink src link # Make a symbolic link 'link' to src from basedir. If the # directory in which link is to be created does not exist # a warning will be displayed and an error will be returned. # Returns 0 on sucess, 1 otherwise. # make_symlink() { local src link linkdir _me src="$1" link="$2" linkdir="`dirname $link`" _me="make_symlink()" if [ -z "$src" -o -z "$link" ]; then warn "$_me: requires two arguments." return 1 fi if [ ! -d "$linkdir" ]; then warn "$_me: the directory $linkdir does not exist" return 1 fi if ! ln -sf $src $link; then warn "$_me: unable to make a symbolic link from $link to $src" return 1 fi return 0 } # devfs_rulesets_from_file file # Reads a set of devfs commands from file, and creates # the specified rulesets with their rules. Returns non-zero # if there was an error. # devfs_rulesets_from_file() { local file _err _me file="$1" _me="devfs_rulesets_from_file" _err=0 if [ -z "$file" ]; then warn "$_me: you must specify a file" return 1 fi if [ ! -e "$file" ]; then debug "$_me: no such file ($file)" return 0 fi debug "reading rulesets from file ($file)" { while read line do case $line in \#*) continue ;; \[*\]*) rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"` if [ -z "$rulenum" ]; then warn "$_me: cannot extract rule number ($line)" _err=1 break fi rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"` if [ -z "$rulename" ]; then warn "$_me: cannot extract rule name ($line)" _err=1 break; fi eval $rulename=\$rulenum debug "found ruleset: $rulename=$rulenum" if ! /sbin/devfs rule -s $rulenum delset; then _err=1 break fi ;; *) rulecmd="${line%%"\#*"}" # evaluate the command incase it includes # other rules if [ -n "$rulecmd" ]; then debug "adding rule ($rulecmd)" if ! eval /sbin/devfs rule -s $rulenum $rulecmd then _err=1 break fi fi ;; esac if [ $_err -ne 0 ]; then debug "error in $_me" break fi done } < $file return $_err } # devfs_init_rulesets # Initializes rulesets from configuration files. Returns # non-zero if there was an error. # devfs_init_rulesets() { local file _me _me="devfs_init_rulesets" # Go through this only once if [ -n "$devfs_rulesets_init" ]; then debug "$_me: devfs rulesets already initialized" return fi for file in $devfs_rulesets; do devfs_rulesets_from_file $file || return 1 done devfs_rulesets_init=1 debug "$_me: devfs rulesets initialized" return 0 } # devfs_set_ruleset ruleset [dir] # Sets the default ruleset of dir to ruleset. The ruleset argument # must be a ruleset name as specified in devfs.rules(5) file. # Returns non-zero if it could not set it successfully. # devfs_set_ruleset() { local devdir rs _me [ -n "$1" ] && eval rs=\$$1 || rs= [ -n "$2" ] && devdir="-m "$2"" || devdir= _me="devfs_set_ruleset" if [ -z "$rs" ]; then warn "$_me: you must specify a ruleset number" return 1 fi debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })" if ! /sbin/devfs $devdir ruleset $rs; then warn "$_me: unable to set ruleset $rs to ${devdir#-m }" return 1 fi return 0 } # devfs_apply_ruleset ruleset [dir] # Apply ruleset number $ruleset to the devfs mountpoint $dir. # The ruleset argument must be a ruleset name as specified # in a devfs.rules(5) file. Returns 0 on success or non-zero # if it could not apply the ruleset. # devfs_apply_ruleset() { local devdir rs _me [ -n "$1" ] && eval rs=\$$1 || rs= [ -n "$2" ] && devdir="-m "$2"" || devdir= _me="devfs_apply_ruleset" if [ -z "$rs" ]; then warn "$_me: you must specify a ruleset" return 1 fi debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })" if ! /sbin/devfs $devdir rule -s $rs applyset; then warn "$_me: unable to apply ruleset $rs to ${devdir#-m }" return 1 fi return 0 } # devfs_domount dir [ruleset] # Mount devfs on dir. If ruleset is specified it is set # on the mount-point. It must also be a ruleset name as specified # in a devfs.rules(5) file. Returns 0 on success. # devfs_domount() { local devdir rs _me devdir="$1" [ -n "$2" ] && rs=$2 || rs= _me="devfs_domount()" if [ -z "$devdir" ]; then warn "$_me: you must specify a mount-point" return 1 fi debug "$_me: mount-point is ($devdir), ruleset is ($rs)" if ! mount -t devfs dev "$devdir"; then warn "$_me: Unable to mount devfs on $devdir" return 1 fi if [ -n "$rs" ]; then devfs_init_rulesets devfs_set_ruleset $rs $devdir devfs -m $devdir rule applyset fi return 0 } # devfs_mount_jail dir [ruleset] # Mounts a devfs file system appropriate for jails # on the directory dir. If ruleset is specified, the ruleset # it names will be used instead. If present, ruleset must # be the name of a ruleset as defined in a devfs.rules(5) file. # This function returns non-zero if an error occurs. # devfs_mount_jail() { local jdev rs _me jdev="$1" [ -n "$2" ] && rs=$2 || rs="devfsrules_jail" _me="devfs_mount_jail" devfs_init_rulesets if ! devfs_domount "$jdev" $rs; then warn "$_me: devfs was not mounted on $jdev" return 1 fi return 0 } # Provide a function for normalizing the mounting of memory # filesystems. This should allow the rest of the code here to remain # as close as possible between 5-current and 4-stable. # $1 = size # $2 = mount point # $3 = (optional) extra mdmfs flags mount_md() { if [ -n "$3" ]; then flags="$3" fi /sbin/mdmfs $flags -s $1 md $2 } # ltr str src dst # Change every $src in $str to $dst. # Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor # awk(1). ltr() { local _str _src _dst _out _com _str=$1 _src=$2 _dst=$3 _out="" IFS=${_src} for _com in ${_str}; do if [ -z "${_out}" ]; then _out="${_com}" else _out="${_out}${_dst}${_com}" fi done echo "${_out}" } # Creates a list of providers for GELI encryption. geli_make_list() { local devices devices2 local provider mountpoint type options rest # Create list of GELI providers from fstab. while read provider mountpoint type options rest ; do case ":${provider}" in :#*) continue ;; *.eli) # Skip swap devices. if [ "${type}" = "swap" -o "${options}" = "sw" ]; then continue fi devices="${devices} ${provider}" ;; esac done < /etc/fstab # Append providers from geli_devices. devices="${devices} ${geli_devices}" for provider in ${devices}; do provider=${provider%.eli} provider=${provider#/dev/} devices2="${devices2} ${provider}" done echo ${devices2} } +# Find scripts in local_startup directories that use the old syntax +# +find_local_scripts_old () { + zlist='' + slist='' + for dir in ${local_startup}; do + if [ -d "${dir}" ]; then + for file in ${dir}/[0-9]*.sh; do + grep '^# PROVIDE:' $file >/dev/null 2>&1 && + continue + zlist="$zlist $file" + done + for file in ${dir}/[^0-9]*.sh; do + grep '^# PROVIDE:' $file >/dev/null 2>&1 && + continue + slist="$slist $file" + done + fi + done +} + +find_local_scripts_new () { + local_rc='' + for dir in ${local_startup}; do + if [ -d "${dir}" ]; then + for file in `grep -l '^# PROVIDE:' ${dir}/*`; do + case "$file" in + *.sample) ;; + *) if [ -x "$file" ]; then + local_rc="${local_rc} ${file}" + fi + ;; + esac + done + fi + done +} + fi diff --git a/sys/sys/param.h b/sys/sys/param.h index 7a19c81af93f..3cf4e58f33e7 100644 --- a/sys/sys/param.h +++ b/sys/sys/param.h @@ -1,333 +1,333 @@ /*- * Copyright (c) 1982, 1986, 1989, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)param.h 8.3 (Berkeley) 4/4/95 * $FreeBSD$ */ #ifndef _SYS_PARAM_H_ #define _SYS_PARAM_H_ #include #define BSD 199506 /* System version (year & month). */ #define BSD4_3 1 #define BSD4_4 1 /* * __FreeBSD_version numbers are documented in the Porter's Handbook. * If you bump the version for any reason, you should update the documentation * there. * Currently this lives here: * * doc/en_US.ISO8859-1/books/porters-handbook/book.sgml * * scheme is: Rxx * 'R' is 0 if release branch or x.0-CURRENT before RELENG_*_0 * is created, otherwise 1. */ #undef __FreeBSD_version -#define __FreeBSD_version 700006 /* Master, propagated to newvers */ +#define __FreeBSD_version 700007 /* Master, propagated to newvers */ #ifndef LOCORE #include #endif /* * Machine-independent constants (some used in following include files). * Redefined constants are from POSIX 1003.1 limits file. * * MAXCOMLEN should be >= sizeof(ac_comm) (see ) * MAXLOGNAME should be == UT_NAMESIZE+1 (see ) */ #include #define MAXCOMLEN 19 /* max command name remembered */ #define MAXINTERP 32 /* max interpreter file name length */ #define MAXLOGNAME 17 /* max login name length (incl. NUL) */ #define MAXUPRC CHILD_MAX /* max simultaneous processes */ #define NCARGS ARG_MAX /* max bytes for an exec function */ #define NGROUPS NGROUPS_MAX /* max number groups */ #define NOFILE OPEN_MAX /* max open files per process */ #define NOGROUP 65535 /* marker for empty group set member */ #define MAXHOSTNAMELEN 256 /* max hostname size */ #define SPECNAMELEN 63 /* max length of devicename */ /* More types and definitions used throughout the kernel. */ #ifdef _KERNEL #if 0 #if (defined(BURN_BRIDGES) || __FreeBSD_version >= 600000) \ && defined(OBSOLETE_IN_6) #error "This file contains obsolete code to be removed in 6.0-current" #endif #endif #include #include #ifndef LOCORE #include #include #endif #define FALSE 0 #define TRUE 1 #endif #ifndef _KERNEL /* Signals. */ #include #endif /* Machine type dependent parameters. */ #include #ifndef _KERNEL #include #endif #ifndef _NO_NAMESPACE_POLLUTION #ifndef DEV_BSHIFT #define DEV_BSHIFT 9 /* log2(DEV_BSIZE) */ #endif #define DEV_BSIZE (1<>PAGE_SHIFT) #endif /* * btodb() is messy and perhaps slow because `bytes' may be an off_t. We * want to shift an unsigned type to avoid sign extension and we don't * want to widen `bytes' unnecessarily. Assume that the result fits in * a daddr_t. */ #ifndef btodb #define btodb(bytes) /* calculates (bytes / DEV_BSIZE) */ \ (sizeof (bytes) > sizeof(long) \ ? (daddr_t)((unsigned long long)(bytes) >> DEV_BSHIFT) \ : (daddr_t)((unsigned long)(bytes) >> DEV_BSHIFT)) #endif #ifndef dbtob #define dbtob(db) /* calculates (db * DEV_BSIZE) */ \ ((off_t)(db) << DEV_BSHIFT) #endif #endif /* _NO_NAMESPACE_POLLUTION */ #define PRIMASK 0x0ff #define PCATCH 0x100 /* OR'd with pri for tsleep to check signals */ #define PDROP 0x200 /* OR'd with pri to stop re-entry of interlock mutex */ #define NZERO 0 /* default "nice" */ #define NBBY 8 /* number of bits in a byte */ #define NBPW sizeof(int) /* number of bytes per word (integer) */ #define CMASK 022 /* default file mask: S_IWGRP|S_IWOTH */ #define NODEV (dev_t)(-1) /* non-existent device */ #define CBLOCK 128 /* Clist block size, must be a power of 2. */ #define CBQSIZE (CBLOCK/NBBY) /* Quote bytes/cblock - can do better. */ /* Data chars/clist. */ #define CBSIZE (CBLOCK - sizeof(struct cblock *) - CBQSIZE) #define CROUND (CBLOCK - 1) /* Clist rounding. */ /* * File system parameters and macros. * * MAXBSIZE - Filesystems are made out of blocks of at most MAXBSIZE bytes * per block. MAXBSIZE may be made larger without effecting * any existing filesystems as long as it does not exceed MAXPHYS, * and may be made smaller at the risk of not being able to use * filesystems which require a block size exceeding MAXBSIZE. * * BKVASIZE - Nominal buffer space per buffer, in bytes. BKVASIZE is the * minimum KVM memory reservation the kernel is willing to make. * Filesystems can of course request smaller chunks. Actual * backing memory uses a chunk size of a page (PAGE_SIZE). * * If you make BKVASIZE too small you risk seriously fragmenting * the buffer KVM map which may slow things down a bit. If you * make it too big the kernel will not be able to optimally use * the KVM memory reserved for the buffer cache and will wind * up with too-few buffers. * * The default is 16384, roughly 2x the block size used by a * normal UFS filesystem. */ #define MAXBSIZE 65536 /* must be power of 2 */ #define BKVASIZE 16384 /* must be power of 2 */ #define BKVAMASK (BKVASIZE-1) /* * MAXPATHLEN defines the longest permissible path length after expanding * symbolic links. It is used to allocate a temporary buffer from the buffer * pool in which to do the name expansion, hence should be a power of two, * and must be less than or equal to MAXBSIZE. MAXSYMLINKS defines the * maximum number of symbolic links that may be expanded in a path name. * It should be set high enough to allow all legitimate uses, but halt * infinite loops reasonably quickly. */ #define MAXPATHLEN PATH_MAX #define MAXSYMLINKS 32 /* Bit map related macros. */ #define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY)) #define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY))) #define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY))) #define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0) /* Macros for counting and rounding. */ #ifndef howmany #define howmany(x, y) (((x)+((y)-1))/(y)) #endif #define rounddown(x, y) (((x)/(y))*(y)) #define roundup(x, y) ((((x)+((y)-1))/(y))*(y)) /* to any y */ #define roundup2(x, y) (((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */ #define powerof2(x) ((((x)-1)&(x))==0) /* Macros for min/max. */ #define MIN(a,b) (((a)<(b))?(a):(b)) #define MAX(a,b) (((a)>(b))?(a):(b)) #ifdef _KERNEL /* * Basic byte order function prototypes for non-inline functions. */ #ifndef LOCORE #ifndef _BYTEORDER_PROTOTYPED #define _BYTEORDER_PROTOTYPED __BEGIN_DECLS __uint32_t htonl(__uint32_t); __uint16_t htons(__uint16_t); __uint32_t ntohl(__uint32_t); __uint16_t ntohs(__uint16_t); __END_DECLS #endif #endif #ifndef lint #ifndef _BYTEORDER_FUNC_DEFINED #define _BYTEORDER_FUNC_DEFINED #define htonl(x) __htonl(x) #define htons(x) __htons(x) #define ntohl(x) __ntohl(x) #define ntohs(x) __ntohs(x) #endif /* !_BYTEORDER_FUNC_DEFINED */ #endif /* lint */ #endif /* _KERNEL */ /* * Constants for setting the parameters of the kernel memory allocator. * * 2 ** MINBUCKET is the smallest unit of memory that will be * allocated. It must be at least large enough to hold a pointer. * * Units of memory less or equal to MAXALLOCSAVE will permanently * allocate physical memory; requests for these size pieces of * memory are quite fast. Allocations greater than MAXALLOCSAVE must * always allocate and free physical memory; requests for these * size allocations should be done infrequently as they will be slow. * * Constraints: PAGE_SIZE <= MAXALLOCSAVE <= 2 ** (MINBUCKET + 14), and * MAXALLOCSIZE must be a power of two. */ #if defined(__alpha__) || defined(__ia64__) || defined(__sparc64__) #define MINBUCKET 5 /* 5 => min allocation of 32 bytes */ #else #define MINBUCKET 4 /* 4 => min allocation of 16 bytes */ #endif #define MAXALLOCSAVE (2 * PAGE_SIZE) /* * Scale factor for scaled integers used to count %cpu time and load avgs. * * The number of CPU `tick's that map to a unique `%age' can be expressed * by the formula (1 / (2 ^ (FSHIFT - 11))). The maximum load average that * can be calculated (assuming 32 bits) can be closely approximated using * the formula (2 ^ (2 * (16 - FSHIFT))) for (FSHIFT < 15). * * For the scheduler to maintain a 1:1 mapping of CPU `tick' to `%age', * FSHIFT must be at least 11; this gives us a maximum load avg of ~1024. */ #define FSHIFT 11 /* bits to right of fixed binary point */ #define FSCALE (1<> (PAGE_SHIFT - DEV_BSHIFT)) #define ctodb(db) /* calculates pages to devblks */ \ ((db) << (PAGE_SHIFT - DEV_BSHIFT)) #endif /* _SYS_PARAM_H_ */