diff --git a/cmd/zed/agents/zfs_mod.c b/cmd/zed/agents/zfs_mod.c index b2c008ad1d0e..9636c99fc85f 100644 --- a/cmd/zed/agents/zfs_mod.c +++ b/cmd/zed/agents/zfs_mod.c @@ -1,1347 +1,1366 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2007, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012 by Delphix. All rights reserved. * Copyright 2014 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2016, 2017, Intel Corporation. * Copyright (c) 2017 Open-E, Inc. All Rights Reserved. + * Copyright (c) 2023, Klara Inc. */ /* * ZFS syseventd module. * * file origin: openzfs/usr/src/cmd/syseventd/modules/zfs_mod/zfs_mod.c * * The purpose of this module is to identify when devices are added to the * system, and appropriately online or replace the affected vdevs. * * When a device is added to the system: * * 1. Search for any vdevs whose devid matches that of the newly added * device. * * 2. If no vdevs are found, then search for any vdevs whose udev path * matches that of the new device. * * 3. If no vdevs match by either method, then ignore the event. * * 4. Attempt to online the device with a flag to indicate that it should * be unspared when resilvering completes. If this succeeds, then the * same device was inserted and we should continue normally. * * 5. If the pool does not have the 'autoreplace' property set, attempt to * online the device again without the unspare flag, which will * generate a FMA fault. * * 6. If the pool has the 'autoreplace' property set, and the matching vdev * is a whole disk, then label the new disk and attempt a 'zpool * replace'. * * The module responds to EC_DEV_ADD events. The special ESC_ZFS_VDEV_CHECK * event indicates that a device failed to open during pool load, but the * autoreplace property was set. In this case, we deferred the associated * FMA fault until our module had a chance to process the autoreplace logic. * If the device could not be replaced, then the second online attempt will * trigger the FMA fault that we skipped earlier. * * On Linux udev provides a disk insert for both the disk and the partition. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zfs_agents.h" #include "../zed_log.h" #define DEV_BYID_PATH "/dev/disk/by-id/" #define DEV_BYPATH_PATH "/dev/disk/by-path/" #define DEV_BYVDEV_PATH "/dev/disk/by-vdev/" typedef void (*zfs_process_func_t)(zpool_handle_t *, nvlist_t *, boolean_t); libzfs_handle_t *g_zfshdl; list_t g_pool_list; /* list of unavailable pools at initialization */ list_t g_device_list; /* list of disks with asynchronous label request */ tpool_t *g_tpool; boolean_t g_enumeration_done; pthread_t g_zfs_tid; /* zfs_enum_pools() thread */ typedef struct unavailpool { zpool_handle_t *uap_zhp; list_node_t uap_node; } unavailpool_t; typedef struct pendingdev { char pd_physpath[128]; list_node_t pd_node; } pendingdev_t; static int zfs_toplevel_state(zpool_handle_t *zhp) { nvlist_t *nvroot; vdev_stat_t *vs; unsigned int c; verify(nvlist_lookup_nvlist(zpool_get_config(zhp, NULL), ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); verify(nvlist_lookup_uint64_array(nvroot, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); return (vs->vs_state); } static int zfs_unavail_pool(zpool_handle_t *zhp, void *data) { zed_log_msg(LOG_INFO, "zfs_unavail_pool: examining '%s' (state %d)", zpool_get_name(zhp), (int)zfs_toplevel_state(zhp)); if (zfs_toplevel_state(zhp) < VDEV_STATE_DEGRADED) { unavailpool_t *uap; uap = malloc(sizeof (unavailpool_t)); if (uap == NULL) { perror("malloc"); exit(EXIT_FAILURE); } uap->uap_zhp = zhp; list_insert_tail((list_t *)data, uap); } else { zpool_close(zhp); } return (0); } /* * Write an array of strings to the zed log */ static void lines_to_zed_log_msg(char **lines, int lines_cnt) { int i; for (i = 0; i < lines_cnt; i++) { zed_log_msg(LOG_INFO, "%s", lines[i]); } } /* * Two stage replace on Linux * since we get disk notifications * we can wait for partitioned disk slice to show up! * * First stage tags the disk, initiates async partitioning, and returns * Second stage finds the tag and proceeds to ZFS labeling/replace * * disk-add --> label-disk + tag-disk --> partition-add --> zpool_vdev_attach * * 1. physical match with no fs, no partition * tag it top, partition disk * * 2. physical match again, see partition and tag * */ /* * The device associated with the given vdev (either by devid or physical path) * has been added to the system. If 'isdisk' is set, then we only attempt a * replacement if it's a whole disk. This also implies that we should label the * disk first. * * First, we attempt to online the device (making sure to undo any spare * operation when finished). If this succeeds, then we're done. If it fails, * and the new state is VDEV_CANT_OPEN, it indicates that the device was opened, * but that the label was not what we expected. If the 'autoreplace' property * is enabled, then we relabel the disk (if specified), and attempt a 'zpool * replace'. If the online is successful, but the new state is something else * (REMOVED or FAULTED), it indicates that we're out of sync or in some sort of * race, and we should avoid attempting to relabel the disk. * * Also can arrive here from a ESC_ZFS_VDEV_CHECK event */ static void zfs_process_add(zpool_handle_t *zhp, nvlist_t *vdev, boolean_t labeled) { const char *path; vdev_state_t newstate; nvlist_t *nvroot, *newvd; pendingdev_t *device; uint64_t wholedisk = 0ULL; uint64_t offline = 0ULL, faulted = 0ULL; uint64_t guid = 0ULL; uint64_t is_spare = 0; const char *physpath = NULL, *new_devid = NULL, *enc_sysfs_path = NULL; char rawpath[PATH_MAX], fullpath[PATH_MAX]; - char devpath[PATH_MAX]; + char pathbuf[PATH_MAX]; int ret; int online_flag = ZFS_ONLINE_CHECKREMOVE | ZFS_ONLINE_UNSPARE; boolean_t is_sd = B_FALSE; boolean_t is_mpath_wholedisk = B_FALSE; uint_t c; vdev_stat_t *vs; char **lines = NULL; int lines_cnt = 0; + /* + * Get the persistent path, typically under the '/dev/disk/by-id' or + * '/dev/disk/by-vdev' directories. Note that this path can change + * when a vdev is replaced with a new disk. + */ if (nvlist_lookup_string(vdev, ZPOOL_CONFIG_PATH, &path) != 0) return; /* Skip healthy disks */ verify(nvlist_lookup_uint64_array(vdev, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); if (vs->vs_state == VDEV_STATE_HEALTHY) { zed_log_msg(LOG_INFO, "%s: %s is already healthy, skip it.", __func__, path); return; } (void) nvlist_lookup_string(vdev, ZPOOL_CONFIG_PHYS_PATH, &physpath); (void) nvlist_lookup_string(vdev, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, &enc_sysfs_path); (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_OFFLINE, &offline); (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_FAULTED, &faulted); (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_GUID, &guid); (void) nvlist_lookup_uint64(vdev, ZPOOL_CONFIG_IS_SPARE, &is_spare); /* * Special case: * * We've seen times where a disk won't have a ZPOOL_CONFIG_PHYS_PATH * entry in their config. For example, on this force-faulted disk: * * children[0]: * type: 'disk' * id: 0 * guid: 14309659774640089719 * path: '/dev/disk/by-vdev/L28' * whole_disk: 0 * DTL: 654 * create_txg: 4 * com.delphix:vdev_zap_leaf: 1161 * faulted: 1 * aux_state: 'external' * children[1]: * type: 'disk' * id: 1 * guid: 16002508084177980912 * path: '/dev/disk/by-vdev/L29' * devid: 'dm-uuid-mpath-35000c500a61d68a3' * phys_path: 'L29' * vdev_enc_sysfs_path: '/sys/class/enclosure/0:0:1:0/SLOT 30 32' * whole_disk: 0 * DTL: 1028 * create_txg: 4 * com.delphix:vdev_zap_leaf: 131 * * If the disk's path is a /dev/disk/by-vdev/ path, then we can infer * the ZPOOL_CONFIG_PHYS_PATH from the by-vdev disk name. */ if (physpath == NULL && path != NULL) { /* If path begins with "/dev/disk/by-vdev/" ... */ if (strncmp(path, DEV_BYVDEV_PATH, strlen(DEV_BYVDEV_PATH)) == 0) { /* Set physpath to the char after "/dev/disk/by-vdev" */ physpath = &path[strlen(DEV_BYVDEV_PATH)]; } } /* * We don't want to autoreplace offlined disks. However, we do want to * replace force-faulted disks (`zpool offline -f`). Force-faulted * disks have both offline=1 and faulted=1 in the nvlist. */ if (offline && !faulted) { zed_log_msg(LOG_INFO, "%s: %s is offline, skip autoreplace", __func__, path); return; } is_mpath_wholedisk = is_mpath_whole_disk(path); zed_log_msg(LOG_INFO, "zfs_process_add: pool '%s' vdev '%s', phys '%s'" " %s blank disk, %s mpath blank disk, %s labeled, enc sysfs '%s', " "(guid %llu)", zpool_get_name(zhp), path, physpath ? physpath : "NULL", wholedisk ? "is" : "not", is_mpath_wholedisk? "is" : "not", labeled ? "is" : "not", enc_sysfs_path, (long long unsigned int)guid); /* * The VDEV guid is preferred for identification (gets passed in path) */ if (guid != 0) { (void) snprintf(fullpath, sizeof (fullpath), "%llu", (long long unsigned int)guid); } else { /* * otherwise use path sans partition suffix for whole disks */ (void) strlcpy(fullpath, path, sizeof (fullpath)); if (wholedisk) { char *spath = zfs_strip_partition(fullpath); if (!spath) { zed_log_msg(LOG_INFO, "%s: Can't alloc", __func__); return; } (void) strlcpy(fullpath, spath, sizeof (fullpath)); free(spath); } } if (is_spare) online_flag |= ZFS_ONLINE_SPARE; /* * Attempt to online the device. */ if (zpool_vdev_online(zhp, fullpath, online_flag, &newstate) == 0 && (newstate == VDEV_STATE_HEALTHY || newstate == VDEV_STATE_DEGRADED)) { zed_log_msg(LOG_INFO, " zpool_vdev_online: vdev '%s' ('%s') is " "%s", fullpath, physpath, (newstate == VDEV_STATE_HEALTHY) ? "HEALTHY" : "DEGRADED"); return; } /* * vdev_id alias rule for using scsi_debug devices (FMA automated * testing) */ if (physpath != NULL && strcmp("scsidebug", physpath) == 0) is_sd = B_TRUE; /* * If the pool doesn't have the autoreplace property set, then use * vdev online to trigger a FMA fault by posting an ereport. */ if (!zpool_get_prop_int(zhp, ZPOOL_PROP_AUTOREPLACE, NULL) || !(wholedisk || is_mpath_wholedisk) || (physpath == NULL)) { (void) zpool_vdev_online(zhp, fullpath, ZFS_ONLINE_FORCEFAULT, &newstate); zed_log_msg(LOG_INFO, "Pool's autoreplace is not enabled or " "not a blank disk for '%s' ('%s')", fullpath, physpath); return; } /* * Convert physical path into its current device node. Rawpath * needs to be /dev/disk/by-vdev for a scsi_debug device since * /dev/disk/by-path will not be present. */ (void) snprintf(rawpath, sizeof (rawpath), "%s%s", is_sd ? DEV_BYVDEV_PATH : DEV_BYPATH_PATH, physpath); - if (realpath(rawpath, devpath) == NULL && !is_mpath_wholedisk) { + if (realpath(rawpath, pathbuf) == NULL && !is_mpath_wholedisk) { zed_log_msg(LOG_INFO, " realpath: %s failed (%s)", rawpath, strerror(errno)); - (void) zpool_vdev_online(zhp, fullpath, ZFS_ONLINE_FORCEFAULT, - &newstate); + int err = zpool_vdev_online(zhp, fullpath, + ZFS_ONLINE_FORCEFAULT, &newstate); - zed_log_msg(LOG_INFO, " zpool_vdev_online: %s FORCEFAULT (%s)", - fullpath, libzfs_error_description(g_zfshdl)); + zed_log_msg(LOG_INFO, " zpool_vdev_online: %s FORCEFAULT (%s) " + "err %d, new state %d", + fullpath, libzfs_error_description(g_zfshdl), err, + err ? (int)newstate : 0); return; } /* Only autoreplace bad disks */ if ((vs->vs_state != VDEV_STATE_DEGRADED) && (vs->vs_state != VDEV_STATE_FAULTED) && (vs->vs_state != VDEV_STATE_REMOVED) && (vs->vs_state != VDEV_STATE_CANT_OPEN)) { zed_log_msg(LOG_INFO, " not autoreplacing since disk isn't in " "a bad state (currently %llu)", vs->vs_state); return; } nvlist_lookup_string(vdev, "new_devid", &new_devid); if (is_mpath_wholedisk) { /* Don't label device mapper or multipath disks. */ zed_log_msg(LOG_INFO, " it's a multipath wholedisk, don't label"); if (zpool_prepare_disk(zhp, vdev, "autoreplace", &lines, &lines_cnt) != 0) { zed_log_msg(LOG_INFO, " zpool_prepare_disk: could not " "prepare '%s' (%s)", fullpath, libzfs_error_description(g_zfshdl)); if (lines_cnt > 0) { zed_log_msg(LOG_INFO, " zfs_prepare_disk output:"); lines_to_zed_log_msg(lines, lines_cnt); } libzfs_free_str_array(lines, lines_cnt); return; } } else if (!labeled) { /* * we're auto-replacing a raw disk, so label it first */ char *leafname; /* * If this is a request to label a whole disk, then attempt to * write out the label. Before we can label the disk, we need * to map the physical string that was matched on to the under * lying device node. * * If any part of this process fails, then do a force online * to trigger a ZFS fault for the device (and any hot spare * replacement). */ - leafname = strrchr(devpath, '/') + 1; + leafname = strrchr(pathbuf, '/') + 1; /* * If this is a request to label a whole disk, then attempt to * write out the label. */ if (zpool_prepare_and_label_disk(g_zfshdl, zhp, leafname, vdev, "autoreplace", &lines, &lines_cnt) != 0) { - zed_log_msg(LOG_INFO, + zed_log_msg(LOG_WARNING, " zpool_prepare_and_label_disk: could not " "label '%s' (%s)", leafname, libzfs_error_description(g_zfshdl)); if (lines_cnt > 0) { zed_log_msg(LOG_INFO, " zfs_prepare_disk output:"); lines_to_zed_log_msg(lines, lines_cnt); } libzfs_free_str_array(lines, lines_cnt); (void) zpool_vdev_online(zhp, fullpath, ZFS_ONLINE_FORCEFAULT, &newstate); return; } /* * The disk labeling is asynchronous on Linux. Just record * this label request and return as there will be another * disk add event for the partition after the labeling is * completed. */ device = malloc(sizeof (pendingdev_t)); if (device == NULL) { perror("malloc"); exit(EXIT_FAILURE); } (void) strlcpy(device->pd_physpath, physpath, sizeof (device->pd_physpath)); list_insert_tail(&g_device_list, device); - zed_log_msg(LOG_INFO, " zpool_label_disk: async '%s' (%llu)", + zed_log_msg(LOG_NOTICE, " zpool_label_disk: async '%s' (%llu)", leafname, (u_longlong_t)guid); return; /* resumes at EC_DEV_ADD.ESC_DISK for partition */ } else /* labeled */ { boolean_t found = B_FALSE; /* * match up with request above to label the disk */ for (device = list_head(&g_device_list); device != NULL; device = list_next(&g_device_list, device)) { if (strcmp(physpath, device->pd_physpath) == 0) { list_remove(&g_device_list, device); free(device); found = B_TRUE; break; } zed_log_msg(LOG_INFO, "zpool_label_disk: %s != %s", physpath, device->pd_physpath); } if (!found) { /* unexpected partition slice encountered */ - zed_log_msg(LOG_INFO, "labeled disk %s unexpected here", - fullpath); + zed_log_msg(LOG_WARNING, "labeled disk %s was " + "unexpected here", fullpath); (void) zpool_vdev_online(zhp, fullpath, ZFS_ONLINE_FORCEFAULT, &newstate); return; } zed_log_msg(LOG_INFO, " zpool_label_disk: resume '%s' (%llu)", physpath, (u_longlong_t)guid); - (void) snprintf(devpath, sizeof (devpath), "%s%s", - DEV_BYID_PATH, new_devid); + /* + * Paths that begin with '/dev/disk/by-id/' will change and so + * they must be updated before calling zpool_vdev_attach(). + */ + if (strncmp(path, DEV_BYID_PATH, strlen(DEV_BYID_PATH)) == 0) { + (void) snprintf(pathbuf, sizeof (pathbuf), "%s%s", + DEV_BYID_PATH, new_devid); + zed_log_msg(LOG_INFO, " zpool_label_disk: path '%s' " + "replaced by '%s'", path, pathbuf); + path = pathbuf; + } } libzfs_free_str_array(lines, lines_cnt); /* * Construct the root vdev to pass to zpool_vdev_attach(). While adding * the entire vdev structure is harmless, we construct a reduced set of * path/physpath/wholedisk to keep it simple. */ if (nvlist_alloc(&nvroot, NV_UNIQUE_NAME, 0) != 0) { zed_log_msg(LOG_WARNING, "zfs_mod: nvlist_alloc out of memory"); return; } if (nvlist_alloc(&newvd, NV_UNIQUE_NAME, 0) != 0) { zed_log_msg(LOG_WARNING, "zfs_mod: nvlist_alloc out of memory"); nvlist_free(nvroot); return; } if (nvlist_add_string(newvd, ZPOOL_CONFIG_TYPE, VDEV_TYPE_DISK) != 0 || nvlist_add_string(newvd, ZPOOL_CONFIG_PATH, path) != 0 || nvlist_add_string(newvd, ZPOOL_CONFIG_DEVID, new_devid) != 0 || (physpath != NULL && nvlist_add_string(newvd, ZPOOL_CONFIG_PHYS_PATH, physpath) != 0) || (enc_sysfs_path != NULL && nvlist_add_string(newvd, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, enc_sysfs_path) != 0) || nvlist_add_uint64(newvd, ZPOOL_CONFIG_WHOLE_DISK, wholedisk) != 0 || nvlist_add_string(nvroot, ZPOOL_CONFIG_TYPE, VDEV_TYPE_ROOT) != 0 || nvlist_add_nvlist_array(nvroot, ZPOOL_CONFIG_CHILDREN, (const nvlist_t **)&newvd, 1) != 0) { zed_log_msg(LOG_WARNING, "zfs_mod: unable to add nvlist pairs"); nvlist_free(newvd); nvlist_free(nvroot); return; } nvlist_free(newvd); /* * Wait for udev to verify the links exist, then auto-replace * the leaf disk at same physical location. */ - if (zpool_label_disk_wait(path, 3000) != 0) { - zed_log_msg(LOG_WARNING, "zfs_mod: expected replacement " - "disk %s is missing", path); + if (zpool_label_disk_wait(path, DISK_LABEL_WAIT) != 0) { + zed_log_msg(LOG_WARNING, "zfs_mod: pool '%s', after labeling " + "replacement disk, the expected disk partition link '%s' " + "is missing after waiting %u ms", + zpool_get_name(zhp), path, DISK_LABEL_WAIT); nvlist_free(nvroot); return; } /* * Prefer sequential resilvering when supported (mirrors and dRAID), * otherwise fallback to a traditional healing resilver. */ ret = zpool_vdev_attach(zhp, fullpath, path, nvroot, B_TRUE, B_TRUE); if (ret != 0) { ret = zpool_vdev_attach(zhp, fullpath, path, nvroot, B_TRUE, B_FALSE); } - zed_log_msg(LOG_INFO, " zpool_vdev_replace: %s with %s (%s)", + zed_log_msg(LOG_WARNING, " zpool_vdev_replace: %s with %s (%s)", fullpath, path, (ret == 0) ? "no errors" : libzfs_error_description(g_zfshdl)); nvlist_free(nvroot); } /* * Utility functions to find a vdev matching given criteria. */ typedef struct dev_data { const char *dd_compare; const char *dd_prop; zfs_process_func_t dd_func; boolean_t dd_found; boolean_t dd_islabeled; uint64_t dd_pool_guid; uint64_t dd_vdev_guid; uint64_t dd_new_vdev_guid; const char *dd_new_devid; uint64_t dd_num_spares; } dev_data_t; static void zfs_iter_vdev(zpool_handle_t *zhp, nvlist_t *nvl, void *data) { dev_data_t *dp = data; const char *path = NULL; uint_t c, children; nvlist_t **child; uint64_t guid = 0; uint64_t isspare = 0; /* * First iterate over any children. */ if (nvlist_lookup_nvlist_array(nvl, ZPOOL_CONFIG_CHILDREN, &child, &children) == 0) { for (c = 0; c < children; c++) zfs_iter_vdev(zhp, child[c], data); } /* * Iterate over any spares and cache devices */ if (nvlist_lookup_nvlist_array(nvl, ZPOOL_CONFIG_SPARES, &child, &children) == 0) { for (c = 0; c < children; c++) zfs_iter_vdev(zhp, child[c], data); } if (nvlist_lookup_nvlist_array(nvl, ZPOOL_CONFIG_L2CACHE, &child, &children) == 0) { for (c = 0; c < children; c++) zfs_iter_vdev(zhp, child[c], data); } /* once a vdev was matched and processed there is nothing left to do */ if (dp->dd_found && dp->dd_num_spares == 0) return; (void) nvlist_lookup_uint64(nvl, ZPOOL_CONFIG_GUID, &guid); /* * Match by GUID if available otherwise fallback to devid or physical */ if (dp->dd_vdev_guid != 0) { if (guid != dp->dd_vdev_guid) return; zed_log_msg(LOG_INFO, " zfs_iter_vdev: matched on %llu", guid); dp->dd_found = B_TRUE; } else if (dp->dd_compare != NULL) { /* * NOTE: On Linux there is an event for partition, so unlike * illumos, substring matching is not required to accommodate * the partition suffix. An exact match will be present in * the dp->dd_compare value. * If the attached disk already contains a vdev GUID, it means * the disk is not clean. In such a scenario, the physical path * would be a match that makes the disk faulted when trying to * online it. So, we would only want to proceed if either GUID * matches with the last attached disk or the disk is in clean * state. */ if (nvlist_lookup_string(nvl, dp->dd_prop, &path) != 0 || strcmp(dp->dd_compare, path) != 0) { return; } if (dp->dd_new_vdev_guid != 0 && dp->dd_new_vdev_guid != guid) { zed_log_msg(LOG_INFO, " %s: no match (GUID:%llu" " != vdev GUID:%llu)", __func__, dp->dd_new_vdev_guid, guid); return; } zed_log_msg(LOG_INFO, " zfs_iter_vdev: matched %s on %s", dp->dd_prop, path); dp->dd_found = B_TRUE; - /* pass the new devid for use by replacing code */ + /* pass the new devid for use by auto-replacing code */ if (dp->dd_new_devid != NULL) { (void) nvlist_add_string(nvl, "new_devid", dp->dd_new_devid); } } if (dp->dd_found == B_TRUE && nvlist_lookup_uint64(nvl, ZPOOL_CONFIG_IS_SPARE, &isspare) == 0 && isspare) dp->dd_num_spares++; (dp->dd_func)(zhp, nvl, dp->dd_islabeled); } static void zfs_enable_ds(void *arg) { unavailpool_t *pool = (unavailpool_t *)arg; (void) zpool_enable_datasets(pool->uap_zhp, NULL, 0); zpool_close(pool->uap_zhp); free(pool); } static int zfs_iter_pool(zpool_handle_t *zhp, void *data) { nvlist_t *config, *nvl; dev_data_t *dp = data; uint64_t pool_guid; unavailpool_t *pool; zed_log_msg(LOG_INFO, "zfs_iter_pool: evaluating vdevs on %s (by %s)", zpool_get_name(zhp), dp->dd_vdev_guid ? "GUID" : dp->dd_prop); /* * For each vdev in this pool, look for a match to apply dd_func */ if ((config = zpool_get_config(zhp, NULL)) != NULL) { if (dp->dd_pool_guid == 0 || (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &pool_guid) == 0 && pool_guid == dp->dd_pool_guid)) { (void) nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvl); zfs_iter_vdev(zhp, nvl, data); } } else { zed_log_msg(LOG_INFO, "%s: no config\n", __func__); } /* * if this pool was originally unavailable, * then enable its datasets asynchronously */ if (g_enumeration_done) { for (pool = list_head(&g_pool_list); pool != NULL; pool = list_next(&g_pool_list, pool)) { if (strcmp(zpool_get_name(zhp), zpool_get_name(pool->uap_zhp))) continue; if (zfs_toplevel_state(zhp) >= VDEV_STATE_DEGRADED) { list_remove(&g_pool_list, pool); (void) tpool_dispatch(g_tpool, zfs_enable_ds, pool); break; } } } zpool_close(zhp); /* cease iteration after a match */ return (dp->dd_found && dp->dd_num_spares == 0); } /* * Given a physical device location, iterate over all * (pool, vdev) pairs which correspond to that location. */ static boolean_t devphys_iter(const char *physical, const char *devid, zfs_process_func_t func, boolean_t is_slice, uint64_t new_vdev_guid) { dev_data_t data = { 0 }; data.dd_compare = physical; data.dd_func = func; data.dd_prop = ZPOOL_CONFIG_PHYS_PATH; data.dd_found = B_FALSE; data.dd_islabeled = is_slice; data.dd_new_devid = devid; /* used by auto replace code */ data.dd_new_vdev_guid = new_vdev_guid; (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data); return (data.dd_found); } /* * Given a device identifier, find any vdevs with a matching by-vdev * path. Normally we shouldn't need this as the comparison would be * made earlier in the devphys_iter(). For example, if we were replacing * /dev/disk/by-vdev/L28, normally devphys_iter() would match the * ZPOOL_CONFIG_PHYS_PATH of "L28" from the old disk config to "L28" * of the new disk config. However, we've seen cases where * ZPOOL_CONFIG_PHYS_PATH was not in the config for the old disk. Here's * an example of a real 2-disk mirror pool where one disk was force * faulted: * * com.delphix:vdev_zap_top: 129 * children[0]: * type: 'disk' * id: 0 * guid: 14309659774640089719 * path: '/dev/disk/by-vdev/L28' * whole_disk: 0 * DTL: 654 * create_txg: 4 * com.delphix:vdev_zap_leaf: 1161 * faulted: 1 * aux_state: 'external' * children[1]: * type: 'disk' * id: 1 * guid: 16002508084177980912 * path: '/dev/disk/by-vdev/L29' * devid: 'dm-uuid-mpath-35000c500a61d68a3' * phys_path: 'L29' * vdev_enc_sysfs_path: '/sys/class/enclosure/0:0:1:0/SLOT 30 32' * whole_disk: 0 * DTL: 1028 * create_txg: 4 * com.delphix:vdev_zap_leaf: 131 * * So in the case above, the only thing we could compare is the path. * * We can do this because we assume by-vdev paths are authoritative as physical * paths. We could not assume this for normal paths like /dev/sda since the * physical location /dev/sda points to could change over time. */ static boolean_t by_vdev_path_iter(const char *by_vdev_path, const char *devid, zfs_process_func_t func, boolean_t is_slice) { dev_data_t data = { 0 }; data.dd_compare = by_vdev_path; data.dd_func = func; data.dd_prop = ZPOOL_CONFIG_PATH; data.dd_found = B_FALSE; data.dd_islabeled = is_slice; data.dd_new_devid = devid; if (strncmp(by_vdev_path, DEV_BYVDEV_PATH, strlen(DEV_BYVDEV_PATH)) != 0) { /* by_vdev_path doesn't start with "/dev/disk/by-vdev/" */ return (B_FALSE); } (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data); return (data.dd_found); } /* * Given a device identifier, find any vdevs with a matching devid. * On Linux we can match devid directly which is always a whole disk. */ static boolean_t devid_iter(const char *devid, zfs_process_func_t func, boolean_t is_slice) { dev_data_t data = { 0 }; data.dd_compare = devid; data.dd_func = func; data.dd_prop = ZPOOL_CONFIG_DEVID; data.dd_found = B_FALSE; data.dd_islabeled = is_slice; data.dd_new_devid = devid; (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data); return (data.dd_found); } /* * Given a device guid, find any vdevs with a matching guid. */ static boolean_t guid_iter(uint64_t pool_guid, uint64_t vdev_guid, const char *devid, zfs_process_func_t func, boolean_t is_slice) { dev_data_t data = { 0 }; data.dd_func = func; data.dd_found = B_FALSE; data.dd_pool_guid = pool_guid; data.dd_vdev_guid = vdev_guid; data.dd_islabeled = is_slice; data.dd_new_devid = devid; (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data); return (data.dd_found); } /* * Handle a EC_DEV_ADD.ESC_DISK event. * * illumos * Expects: DEV_PHYS_PATH string in schema * Matches: vdev's ZPOOL_CONFIG_PHYS_PATH or ZPOOL_CONFIG_DEVID * * path: '/dev/dsk/c0t1d0s0' (persistent) * devid: 'id1,sd@SATA_____Hitachi_HDS72101______JP2940HZ3H74MC/a' * phys_path: '/pci@0,0/pci103c,1609@11/disk@1,0:a' * * linux * provides: DEV_PHYS_PATH and DEV_IDENTIFIER strings in schema * Matches: vdev's ZPOOL_CONFIG_PHYS_PATH or ZPOOL_CONFIG_DEVID * * path: '/dev/sdc1' (not persistent) * devid: 'ata-SAMSUNG_HD204UI_S2HGJD2Z805891-part1' * phys_path: 'pci-0000:04:00.0-sas-0x4433221106000000-lun-0' */ static int zfs_deliver_add(nvlist_t *nvl) { const char *devpath = NULL, *devid = NULL; uint64_t pool_guid = 0, vdev_guid = 0; boolean_t is_slice; /* * Expecting a devid string and an optional physical location and guid */ if (nvlist_lookup_string(nvl, DEV_IDENTIFIER, &devid) != 0) { zed_log_msg(LOG_INFO, "%s: no dev identifier\n", __func__); return (-1); } (void) nvlist_lookup_string(nvl, DEV_PHYS_PATH, &devpath); (void) nvlist_lookup_uint64(nvl, ZFS_EV_POOL_GUID, &pool_guid); (void) nvlist_lookup_uint64(nvl, ZFS_EV_VDEV_GUID, &vdev_guid); is_slice = (nvlist_lookup_boolean(nvl, DEV_IS_PART) == 0); zed_log_msg(LOG_INFO, "zfs_deliver_add: adding %s (%s) (is_slice %d)", devid, devpath ? devpath : "NULL", is_slice); /* * Iterate over all vdevs looking for a match in the following order: * 1. ZPOOL_CONFIG_DEVID (identifies the unique disk) * 2. ZPOOL_CONFIG_PHYS_PATH (identifies disk physical location). * 3. ZPOOL_CONFIG_GUID (identifies unique vdev). * 4. ZPOOL_CONFIG_PATH for /dev/disk/by-vdev devices only (since * by-vdev paths represent physical paths). */ if (devid_iter(devid, zfs_process_add, is_slice)) return (0); if (devpath != NULL && devphys_iter(devpath, devid, zfs_process_add, is_slice, vdev_guid)) return (0); if (vdev_guid != 0) (void) guid_iter(pool_guid, vdev_guid, devid, zfs_process_add, is_slice); if (devpath != NULL) { /* Can we match a /dev/disk/by-vdev/ path? */ char by_vdev_path[MAXPATHLEN]; snprintf(by_vdev_path, sizeof (by_vdev_path), "/dev/disk/by-vdev/%s", devpath); if (by_vdev_path_iter(by_vdev_path, devid, zfs_process_add, is_slice)) return (0); } return (0); } /* * Called when we receive a VDEV_CHECK event, which indicates a device could not * be opened during initial pool open, but the autoreplace property was set on * the pool. In this case, we treat it as if it were an add event. */ static int zfs_deliver_check(nvlist_t *nvl) { dev_data_t data = { 0 }; if (nvlist_lookup_uint64(nvl, ZFS_EV_POOL_GUID, &data.dd_pool_guid) != 0 || nvlist_lookup_uint64(nvl, ZFS_EV_VDEV_GUID, &data.dd_vdev_guid) != 0 || data.dd_vdev_guid == 0) return (0); zed_log_msg(LOG_INFO, "zfs_deliver_check: pool '%llu', vdev %llu", data.dd_pool_guid, data.dd_vdev_guid); data.dd_func = zfs_process_add; (void) zpool_iter(g_zfshdl, zfs_iter_pool, &data); return (0); } /* * Given a path to a vdev, lookup the vdev's physical size from its * config nvlist. * * Returns the vdev's physical size in bytes on success, 0 on error. */ static uint64_t vdev_size_from_config(zpool_handle_t *zhp, const char *vdev_path) { nvlist_t *nvl = NULL; boolean_t avail_spare, l2cache, log; vdev_stat_t *vs = NULL; uint_t c; nvl = zpool_find_vdev(zhp, vdev_path, &avail_spare, &l2cache, &log); if (!nvl) return (0); verify(nvlist_lookup_uint64_array(nvl, ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &c) == 0); if (!vs) { zed_log_msg(LOG_INFO, "%s: no nvlist for '%s'", __func__, vdev_path); return (0); } return (vs->vs_pspace); } /* * Given a path to a vdev, lookup if the vdev is a "whole disk" in the * config nvlist. "whole disk" means that ZFS was passed a whole disk * at pool creation time, which it partitioned up and has full control over. * Thus a partition with wholedisk=1 set tells us that zfs created the * partition at creation time. A partition without whole disk set would have * been created by externally (like with fdisk) and passed to ZFS. * * Returns the whole disk value (either 0 or 1). */ static uint64_t vdev_whole_disk_from_config(zpool_handle_t *zhp, const char *vdev_path) { nvlist_t *nvl = NULL; boolean_t avail_spare, l2cache, log; uint64_t wholedisk = 0; nvl = zpool_find_vdev(zhp, vdev_path, &avail_spare, &l2cache, &log); if (!nvl) return (0); (void) nvlist_lookup_uint64(nvl, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); return (wholedisk); } /* * If the device size grew more than 1% then return true. */ #define DEVICE_GREW(oldsize, newsize) \ ((newsize > oldsize) && \ ((newsize / (newsize - oldsize)) <= 100)) static int zfsdle_vdev_online(zpool_handle_t *zhp, void *data) { boolean_t avail_spare, l2cache; nvlist_t *udev_nvl = data; nvlist_t *tgt; int error; const char *tmp_devname; char devname[MAXPATHLEN] = ""; uint64_t guid; if (nvlist_lookup_uint64(udev_nvl, ZFS_EV_VDEV_GUID, &guid) == 0) { sprintf(devname, "%llu", (u_longlong_t)guid); } else if (nvlist_lookup_string(udev_nvl, DEV_PHYS_PATH, &tmp_devname) == 0) { strlcpy(devname, tmp_devname, MAXPATHLEN); zfs_append_partition(devname, MAXPATHLEN); } else { zed_log_msg(LOG_INFO, "%s: no guid or physpath", __func__); } zed_log_msg(LOG_INFO, "zfsdle_vdev_online: searching for '%s' in '%s'", devname, zpool_get_name(zhp)); if ((tgt = zpool_find_vdev_by_physpath(zhp, devname, &avail_spare, &l2cache, NULL)) != NULL) { const char *path; char fullpath[MAXPATHLEN]; uint64_t wholedisk = 0; error = nvlist_lookup_string(tgt, ZPOOL_CONFIG_PATH, &path); if (error) { zpool_close(zhp); return (0); } (void) nvlist_lookup_uint64(tgt, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); if (wholedisk) { char *tmp; path = strrchr(path, '/'); if (path != NULL) { tmp = zfs_strip_partition(path + 1); if (tmp == NULL) { zpool_close(zhp); return (0); } } else { zpool_close(zhp); return (0); } (void) strlcpy(fullpath, tmp, sizeof (fullpath)); free(tmp); /* * We need to reopen the pool associated with this * device so that the kernel can update the size of * the expanded device. When expanding there is no * need to restart the scrub from the beginning. */ boolean_t scrub_restart = B_FALSE; (void) zpool_reopen_one(zhp, &scrub_restart); } else { (void) strlcpy(fullpath, path, sizeof (fullpath)); } if (zpool_get_prop_int(zhp, ZPOOL_PROP_AUTOEXPAND, NULL)) { vdev_state_t newstate; if (zpool_get_state(zhp) != POOL_STATE_UNAVAIL) { /* * If this disk size has not changed, then * there's no need to do an autoexpand. To * check we look at the disk's size in its * config, and compare it to the disk size * that udev is reporting. */ uint64_t udev_size = 0, conf_size = 0, wholedisk = 0, udev_parent_size = 0; /* * Get the size of our disk that udev is * reporting. */ if (nvlist_lookup_uint64(udev_nvl, DEV_SIZE, &udev_size) != 0) { udev_size = 0; } /* * Get the size of our disk's parent device * from udev (where sda1's parent is sda). */ if (nvlist_lookup_uint64(udev_nvl, DEV_PARENT_SIZE, &udev_parent_size) != 0) { udev_parent_size = 0; } conf_size = vdev_size_from_config(zhp, fullpath); wholedisk = vdev_whole_disk_from_config(zhp, fullpath); /* * Only attempt an autoexpand if the vdev size * changed. There are two different cases * to consider. * * 1. wholedisk=1 * If you do a 'zpool create' on a whole disk * (like /dev/sda), then zfs will create * partitions on the disk (like /dev/sda1). In * that case, wholedisk=1 will be set in the * partition's nvlist config. So zed will need * to see if your parent device (/dev/sda) * expanded in size, and if so, then attempt * the autoexpand. * * 2. wholedisk=0 * If you do a 'zpool create' on an existing * partition, or a device that doesn't allow * partitions, then wholedisk=0, and you will * simply need to check if the device itself * expanded in size. */ if (DEVICE_GREW(conf_size, udev_size) || (wholedisk && DEVICE_GREW(conf_size, udev_parent_size))) { error = zpool_vdev_online(zhp, fullpath, 0, &newstate); zed_log_msg(LOG_INFO, "%s: autoexpanding '%s' from %llu" " to %llu bytes in pool '%s': %d", __func__, fullpath, conf_size, MAX(udev_size, udev_parent_size), zpool_get_name(zhp), error); } } } zpool_close(zhp); return (1); } zpool_close(zhp); return (0); } /* * This function handles the ESC_DEV_DLE device change event. Use the * provided vdev guid when looking up a disk or partition, when the guid * is not present assume the entire disk is owned by ZFS and append the * expected -part1 partition information then lookup by physical path. */ static int zfs_deliver_dle(nvlist_t *nvl) { const char *devname; char name[MAXPATHLEN]; uint64_t guid; if (nvlist_lookup_uint64(nvl, ZFS_EV_VDEV_GUID, &guid) == 0) { sprintf(name, "%llu", (u_longlong_t)guid); } else if (nvlist_lookup_string(nvl, DEV_PHYS_PATH, &devname) == 0) { strlcpy(name, devname, MAXPATHLEN); zfs_append_partition(name, MAXPATHLEN); } else { sprintf(name, "unknown"); zed_log_msg(LOG_INFO, "zfs_deliver_dle: no guid or physpath"); } if (zpool_iter(g_zfshdl, zfsdle_vdev_online, nvl) != 1) { zed_log_msg(LOG_INFO, "zfs_deliver_dle: device '%s' not " "found", name); return (1); } return (0); } /* * syseventd daemon module event handler * * Handles syseventd daemon zfs device related events: * * EC_DEV_ADD.ESC_DISK * EC_DEV_STATUS.ESC_DEV_DLE * EC_ZFS.ESC_ZFS_VDEV_CHECK * * Note: assumes only one thread active at a time (not thread safe) */ static int zfs_slm_deliver_event(const char *class, const char *subclass, nvlist_t *nvl) { int ret; boolean_t is_check = B_FALSE, is_dle = B_FALSE; if (strcmp(class, EC_DEV_ADD) == 0) { /* * We're mainly interested in disk additions, but we also listen * for new loop devices, to allow for simplified testing. */ if (strcmp(subclass, ESC_DISK) != 0 && strcmp(subclass, ESC_LOFI) != 0) return (0); is_check = B_FALSE; } else if (strcmp(class, EC_ZFS) == 0 && strcmp(subclass, ESC_ZFS_VDEV_CHECK) == 0) { /* * This event signifies that a device failed to open * during pool load, but the 'autoreplace' property was * set, so we should pretend it's just been added. */ is_check = B_TRUE; } else if (strcmp(class, EC_DEV_STATUS) == 0 && strcmp(subclass, ESC_DEV_DLE) == 0) { is_dle = B_TRUE; } else { return (0); } if (is_dle) ret = zfs_deliver_dle(nvl); else if (is_check) ret = zfs_deliver_check(nvl); else ret = zfs_deliver_add(nvl); return (ret); } static void * zfs_enum_pools(void *arg) { (void) arg; (void) zpool_iter(g_zfshdl, zfs_unavail_pool, (void *)&g_pool_list); /* * Linux - instead of using a thread pool, each list entry * will spawn a thread when an unavailable pool transitions * to available. zfs_slm_fini will wait for these threads. */ g_enumeration_done = B_TRUE; return (NULL); } /* * called from zed daemon at startup * * sent messages from zevents or udev monitor * * For now, each agent has its own libzfs instance */ int zfs_slm_init(void) { if ((g_zfshdl = libzfs_init()) == NULL) return (-1); /* * collect a list of unavailable pools (asynchronously, * since this can take a while) */ list_create(&g_pool_list, sizeof (struct unavailpool), offsetof(struct unavailpool, uap_node)); if (pthread_create(&g_zfs_tid, NULL, zfs_enum_pools, NULL) != 0) { list_destroy(&g_pool_list); libzfs_fini(g_zfshdl); return (-1); } pthread_setname_np(g_zfs_tid, "enum-pools"); list_create(&g_device_list, sizeof (struct pendingdev), offsetof(struct pendingdev, pd_node)); return (0); } void zfs_slm_fini(void) { unavailpool_t *pool; pendingdev_t *device; /* wait for zfs_enum_pools thread to complete */ (void) pthread_join(g_zfs_tid, NULL); /* destroy the thread pool */ if (g_tpool != NULL) { tpool_wait(g_tpool); tpool_destroy(g_tpool); } while ((pool = list_remove_head(&g_pool_list)) != NULL) { zpool_close(pool->uap_zhp); free(pool); } list_destroy(&g_pool_list); while ((device = list_remove_head(&g_device_list)) != NULL) free(device); list_destroy(&g_device_list); libzfs_fini(g_zfshdl); } void zfs_slm_event(const char *class, const char *subclass, nvlist_t *nvl) { zed_log_msg(LOG_INFO, "zfs_slm_event: %s.%s", class, subclass); (void) zfs_slm_deliver_event(class, subclass, nvl); } diff --git a/include/libzutil.h b/include/libzutil.h index 237ff976ba62..053b1ed4b52a 100644 --- a/include/libzutil.h +++ b/include/libzutil.h @@ -1,215 +1,215 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2018 by Delphix. All rights reserved. */ #ifndef _LIBZUTIL_H #define _LIBZUTIL_H extern __attribute__((visibility("default"))) #include #include #ifdef __cplusplus extern "C" { #endif /* - * Default wait time for a device name to be created. + * Default wait time in milliseconds for a device name to be created. */ #define DISK_LABEL_WAIT (30 * 1000) /* 30 seconds */ /* * Pool Config Operations * * These are specific to the library libzfs or libzpool instance. */ typedef nvlist_t *refresh_config_func_t(void *, nvlist_t *); typedef int pool_active_func_t(void *, const char *, uint64_t, boolean_t *); typedef const struct pool_config_ops { refresh_config_func_t *pco_refresh_config; pool_active_func_t *pco_pool_active; } pool_config_ops_t; /* * An instance of pool_config_ops_t is expected in the caller's binary. */ _LIBZUTIL_H pool_config_ops_t libzfs_config_ops; _LIBZUTIL_H pool_config_ops_t libzpool_config_ops; typedef enum lpc_error { LPC_SUCCESS = 0, /* no error -- success */ LPC_BADCACHE = 2000, /* out of memory */ LPC_BADPATH, /* must be an absolute path */ LPC_NOMEM, /* out of memory */ LPC_EACCESS, /* some devices require root privileges */ LPC_UNKNOWN } lpc_error_t; typedef struct importargs { char **path; /* a list of paths to search */ int paths; /* number of paths to search */ const char *poolname; /* name of a pool to find */ uint64_t guid; /* guid of a pool to find */ const char *cachefile; /* cachefile to use for import */ boolean_t can_be_active; /* can the pool be active? */ boolean_t scan; /* prefer scanning to libblkid cache */ nvlist_t *policy; /* load policy (max txg, rewind, etc.) */ } importargs_t; typedef struct libpc_handle { int lpc_error; boolean_t lpc_printerr; boolean_t lpc_open_access_error; boolean_t lpc_desc_active; char lpc_desc[1024]; pool_config_ops_t *lpc_ops; void *lpc_lib_handle; } libpc_handle_t; _LIBZUTIL_H const char *libpc_error_description(libpc_handle_t *); _LIBZUTIL_H nvlist_t *zpool_search_import(libpc_handle_t *, importargs_t *); _LIBZUTIL_H int zpool_find_config(libpc_handle_t *, const char *, nvlist_t **, importargs_t *); _LIBZUTIL_H const char * const * zpool_default_search_paths(size_t *count); _LIBZUTIL_H int zpool_read_label(int, nvlist_t **, int *); _LIBZUTIL_H int zpool_label_disk_wait(const char *, int); struct udev_device; _LIBZUTIL_H int zfs_device_get_devid(struct udev_device *, char *, size_t); _LIBZUTIL_H int zfs_device_get_physical(struct udev_device *, char *, size_t); _LIBZUTIL_H void update_vdev_config_dev_strs(nvlist_t *); /* * Default device paths */ #define DISK_ROOT "/dev" #define UDISK_ROOT "/dev/disk" #define ZVOL_ROOT "/dev/zvol" _LIBZUTIL_H int zfs_append_partition(char *path, size_t max_len); _LIBZUTIL_H int zfs_resolve_shortname(const char *name, char *path, size_t pathlen); _LIBZUTIL_H char *zfs_strip_partition(const char *); _LIBZUTIL_H const char *zfs_strip_path(const char *); _LIBZUTIL_H int zfs_strcmp_pathname(const char *, const char *, int); _LIBZUTIL_H boolean_t zfs_dev_is_dm(const char *); _LIBZUTIL_H boolean_t zfs_dev_is_whole_disk(const char *); _LIBZUTIL_H int zfs_dev_flush(int); _LIBZUTIL_H char *zfs_get_underlying_path(const char *); _LIBZUTIL_H char *zfs_get_enclosure_sysfs_path(const char *); _LIBZUTIL_H boolean_t is_mpath_whole_disk(const char *); _LIBZUTIL_H boolean_t zfs_isnumber(const char *); /* * Formats for iostat numbers. Examples: "12K", "30ms", "4B", "2321234", "-". * * ZFS_NICENUM_1024: Print kilo, mega, tera, peta, exa.. * ZFS_NICENUM_BYTES: Print single bytes ("13B"), kilo, mega, tera... * ZFS_NICENUM_TIME: Print nanosecs, microsecs, millisecs, seconds... * ZFS_NICENUM_RAW: Print the raw number without any formatting * ZFS_NICENUM_RAWTIME: Same as RAW, but print dashes ('-') for zero. */ enum zfs_nicenum_format { ZFS_NICENUM_1024 = 0, ZFS_NICENUM_BYTES = 1, ZFS_NICENUM_TIME = 2, ZFS_NICENUM_RAW = 3, ZFS_NICENUM_RAWTIME = 4 }; /* * Convert a number to a human-readable form. */ _LIBZUTIL_H void zfs_nicebytes(uint64_t, char *, size_t); _LIBZUTIL_H void zfs_nicenum(uint64_t, char *, size_t); _LIBZUTIL_H void zfs_nicenum_format(uint64_t, char *, size_t, enum zfs_nicenum_format); _LIBZUTIL_H void zfs_nicetime(uint64_t, char *, size_t); _LIBZUTIL_H void zfs_niceraw(uint64_t, char *, size_t); #define nicenum(num, buf, size) zfs_nicenum(num, buf, size) _LIBZUTIL_H void zpool_dump_ddt(const ddt_stat_t *, const ddt_histogram_t *); _LIBZUTIL_H int zpool_history_unpack(char *, uint64_t, uint64_t *, nvlist_t ***, uint_t *); struct zfs_cmd; /* * List of colors to use */ #define ANSI_BLACK "\033[0;30m" #define ANSI_RED "\033[0;31m" #define ANSI_GREEN "\033[0;32m" #define ANSI_YELLOW "\033[0;33m" #define ANSI_BLUE "\033[0;34m" #define ANSI_BOLD_BLUE "\033[1;34m" /* light blue */ #define ANSI_MAGENTA "\033[0;35m" #define ANSI_CYAN "\033[0;36m" #define ANSI_GRAY "\033[0;37m" #define ANSI_RESET "\033[0m" #define ANSI_BOLD "\033[1m" _LIBZUTIL_H int use_color(void); _LIBZUTIL_H void color_start(const char *color); _LIBZUTIL_H void color_end(void); _LIBZUTIL_H int printf_color(const char *color, const char *format, ...); _LIBZUTIL_H const char *zfs_basename(const char *path); _LIBZUTIL_H ssize_t zfs_dirnamelen(const char *path); #ifdef __linux__ extern char **environ; _LIBZUTIL_H void zfs_setproctitle_init(int argc, char *argv[], char *envp[]); _LIBZUTIL_H void zfs_setproctitle(const char *fmt, ...); #else #define zfs_setproctitle(fmt, ...) setproctitle(fmt, ##__VA_ARGS__) #define zfs_setproctitle_init(x, y, z) ((void)0) #endif /* * These functions are used by the ZFS libraries and cmd/zpool code, but are * not exported in the ABI. */ typedef int (*pool_vdev_iter_f)(void *, nvlist_t *, void *); int for_each_vdev_cb(void *zhp, nvlist_t *nv, pool_vdev_iter_f func, void *data); int for_each_vdev_in_nvlist(nvlist_t *nvroot, pool_vdev_iter_f func, void *data); void update_vdevs_config_dev_sysfs_path(nvlist_t *config); #ifdef __cplusplus } #endif #endif /* _LIBZUTIL_H */ diff --git a/lib/libzutil/os/linux/zutil_import_os.c b/lib/libzutil/os/linux/zutil_import_os.c index 8b64369dc29f..44ed697dd490 100644 --- a/lib/libzutil/os/linux/zutil_import_os.c +++ b/lib/libzutil/os/linux/zutil_import_os.c @@ -1,899 +1,898 @@ /* * CDDL HEADER START * * The contents of this file are subject to the terms of the * Common Development and Distribution License (the "License"). * You may not use this file except in compliance with the License. * * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE * or https://opensource.org/licenses/CDDL-1.0. * See the License for the specific language governing permissions * and limitations under the License. * * When distributing Covered Code, include this CDDL HEADER in each * file and include the License file at usr/src/OPENSOLARIS.LICENSE. * If applicable, add the following below this CDDL HEADER, with the * fields enclosed by brackets "[]" replaced with your own identifying * information: Portions Copyright [yyyy] [name of copyright owner] * * CDDL HEADER END */ /* * Copyright 2015 Nexenta Systems, Inc. All rights reserved. * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved. * Copyright (c) 2012, 2018 by Delphix. All rights reserved. * Copyright 2015 RackTop Systems. * Copyright (c) 2016, Intel Corporation. */ /* * Pool import support functions. * * Used by zpool, ztest, zdb, and zhack to locate importable configs. Since * these commands are expected to run in the global zone, we can assume * that the devices are all readable when called. * * To import a pool, we rely on reading the configuration information from the * ZFS label of each device. If we successfully read the label, then we * organize the configuration information in the following hierarchy: * * pool guid -> toplevel vdev guid -> label txg * * Duplicate entries matching this same tuple will be discarded. Once we have * examined every device, we pick the best label txg config for each toplevel * vdev. We then arrange these toplevel vdevs into a complete pool config, and * update any paths that have changed. Finally, we attempt to import the pool * using our derived config, and record the results. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "zutil_import.h" #ifdef HAVE_LIBUDEV #include #include #endif #include #define DEV_BYID_PATH "/dev/disk/by-id/" /* * Skip devices with well known prefixes: * there can be side effects when opening devices which need to be avoided. * * hpet - High Precision Event Timer * watchdog[N] - Watchdog must be closed in a special way. */ static boolean_t should_skip_dev(const char *dev) { return ((strcmp(dev, "watchdog") == 0) || (strncmp(dev, "watchdog", 8) == 0 && isdigit(dev[8])) || (strcmp(dev, "hpet") == 0)); } int zfs_dev_flush(int fd) { return (ioctl(fd, BLKFLSBUF)); } void zpool_open_func(void *arg) { rdsk_node_t *rn = arg; libpc_handle_t *hdl = rn->rn_hdl; struct stat64 statbuf; nvlist_t *config; uint64_t vdev_guid = 0; int error; int num_labels = 0; int fd; if (should_skip_dev(zfs_basename(rn->rn_name))) return; /* * Ignore failed stats. We only want regular files and block devices. * Ignore files that are too small to hold a zpool. */ if (stat64(rn->rn_name, &statbuf) != 0 || (!S_ISREG(statbuf.st_mode) && !S_ISBLK(statbuf.st_mode)) || (S_ISREG(statbuf.st_mode) && statbuf.st_size < SPA_MINDEVSIZE)) return; /* * Preferentially open using O_DIRECT to bypass the block device * cache which may be stale for multipath devices. An EINVAL errno * indicates O_DIRECT is unsupported so fallback to just O_RDONLY. */ fd = open(rn->rn_name, O_RDONLY | O_DIRECT | O_CLOEXEC); if ((fd < 0) && (errno == EINVAL)) fd = open(rn->rn_name, O_RDONLY | O_CLOEXEC); if ((fd < 0) && (errno == EACCES)) hdl->lpc_open_access_error = B_TRUE; if (fd < 0) return; error = zpool_read_label(fd, &config, &num_labels); if (error != 0) { (void) close(fd); return; } if (num_labels == 0) { (void) close(fd); nvlist_free(config); return; } /* * Check that the vdev is for the expected guid. Additional entries * are speculatively added based on the paths stored in the labels. * Entries with valid paths but incorrect guids must be removed. */ error = nvlist_lookup_uint64(config, ZPOOL_CONFIG_GUID, &vdev_guid); if (error || (rn->rn_vdev_guid && rn->rn_vdev_guid != vdev_guid)) { (void) close(fd); nvlist_free(config); return; } (void) close(fd); rn->rn_config = config; rn->rn_num_labels = num_labels; /* * Add additional entries for paths described by this label. */ if (rn->rn_labelpaths) { const char *path = NULL; const char *devid = NULL; const char *env = NULL; rdsk_node_t *slice; avl_index_t where; int timeout; int error; if (label_paths(rn->rn_hdl, rn->rn_config, &path, &devid)) return; env = getenv("ZPOOL_IMPORT_UDEV_TIMEOUT_MS"); if ((env == NULL) || sscanf(env, "%d", &timeout) != 1 || timeout < 0) { timeout = DISK_LABEL_WAIT; } /* * Allow devlinks to stabilize so all paths are available. */ zpool_label_disk_wait(rn->rn_name, timeout); if (path != NULL) { slice = zutil_alloc(hdl, sizeof (rdsk_node_t)); slice->rn_name = zutil_strdup(hdl, path); slice->rn_vdev_guid = vdev_guid; slice->rn_avl = rn->rn_avl; slice->rn_hdl = hdl; slice->rn_order = IMPORT_ORDER_PREFERRED_1; slice->rn_labelpaths = B_FALSE; pthread_mutex_lock(rn->rn_lock); if (avl_find(rn->rn_avl, slice, &where)) { pthread_mutex_unlock(rn->rn_lock); free(slice->rn_name); free(slice); } else { avl_insert(rn->rn_avl, slice, where); pthread_mutex_unlock(rn->rn_lock); zpool_open_func(slice); } } if (devid != NULL) { slice = zutil_alloc(hdl, sizeof (rdsk_node_t)); error = asprintf(&slice->rn_name, "%s%s", DEV_BYID_PATH, devid); if (error == -1) { free(slice); return; } slice->rn_vdev_guid = vdev_guid; slice->rn_avl = rn->rn_avl; slice->rn_hdl = hdl; slice->rn_order = IMPORT_ORDER_PREFERRED_2; slice->rn_labelpaths = B_FALSE; pthread_mutex_lock(rn->rn_lock); if (avl_find(rn->rn_avl, slice, &where)) { pthread_mutex_unlock(rn->rn_lock); free(slice->rn_name); free(slice); } else { avl_insert(rn->rn_avl, slice, where); pthread_mutex_unlock(rn->rn_lock); zpool_open_func(slice); } } } } static const char * const zpool_default_import_path[] = { "/dev/disk/by-vdev", /* Custom rules, use first if they exist */ "/dev/mapper", /* Use multipath devices before components */ "/dev/disk/by-partlabel", /* Single unique entry set by user */ "/dev/disk/by-partuuid", /* Generated partition uuid */ "/dev/disk/by-label", /* Custom persistent labels */ "/dev/disk/by-uuid", /* Single unique entry and persistent */ "/dev/disk/by-id", /* May be multiple entries and persistent */ "/dev/disk/by-path", /* Encodes physical location and persistent */ "/dev" /* UNSAFE device names will change */ }; const char * const * zpool_default_search_paths(size_t *count) { *count = ARRAY_SIZE(zpool_default_import_path); return (zpool_default_import_path); } /* * Given a full path to a device determine if that device appears in the * import search path. If it does return the first match and store the * index in the passed 'order' variable, otherwise return an error. */ static int zfs_path_order(const char *name, int *order) { const char *env = getenv("ZPOOL_IMPORT_PATH"); if (env) { for (int i = 0; ; ++i) { env += strspn(env, ":"); size_t dirlen = strcspn(env, ":"); if (dirlen) { if (strncmp(name, env, dirlen) == 0) { *order = i; return (0); } env += dirlen; } else break; } } else { for (int i = 0; i < ARRAY_SIZE(zpool_default_import_path); ++i) { if (strncmp(name, zpool_default_import_path[i], strlen(zpool_default_import_path[i])) == 0) { *order = i; return (0); } } } return (ENOENT); } /* * Use libblkid to quickly enumerate all known zfs devices. */ int zpool_find_import_blkid(libpc_handle_t *hdl, pthread_mutex_t *lock, avl_tree_t **slice_cache) { rdsk_node_t *slice; blkid_cache cache; blkid_dev_iterate iter; blkid_dev dev; avl_index_t where; int error; *slice_cache = NULL; error = blkid_get_cache(&cache, NULL); if (error != 0) return (error); error = blkid_probe_all_new(cache); if (error != 0) { blkid_put_cache(cache); return (error); } iter = blkid_dev_iterate_begin(cache); if (iter == NULL) { blkid_put_cache(cache); return (EINVAL); } /* Only const char *s since 2.32 */ error = blkid_dev_set_search(iter, (char *)"TYPE", (char *)"zfs_member"); if (error != 0) { blkid_dev_iterate_end(iter); blkid_put_cache(cache); return (error); } *slice_cache = zutil_alloc(hdl, sizeof (avl_tree_t)); avl_create(*slice_cache, slice_cache_compare, sizeof (rdsk_node_t), offsetof(rdsk_node_t, rn_node)); while (blkid_dev_next(iter, &dev) == 0) { slice = zutil_alloc(hdl, sizeof (rdsk_node_t)); slice->rn_name = zutil_strdup(hdl, blkid_dev_devname(dev)); slice->rn_vdev_guid = 0; slice->rn_lock = lock; slice->rn_avl = *slice_cache; slice->rn_hdl = hdl; slice->rn_labelpaths = B_TRUE; error = zfs_path_order(slice->rn_name, &slice->rn_order); if (error == 0) slice->rn_order += IMPORT_ORDER_SCAN_OFFSET; else slice->rn_order = IMPORT_ORDER_DEFAULT; pthread_mutex_lock(lock); if (avl_find(*slice_cache, slice, &where)) { free(slice->rn_name); free(slice); } else { avl_insert(*slice_cache, slice, where); } pthread_mutex_unlock(lock); } blkid_dev_iterate_end(iter); blkid_put_cache(cache); return (0); } /* * Linux persistent device strings for vdev labels * * based on libudev for consistency with libudev disk add/remove events */ typedef struct vdev_dev_strs { char vds_devid[128]; char vds_devphys[128]; } vdev_dev_strs_t; #ifdef HAVE_LIBUDEV /* * Obtain the persistent device id string (describes what) * * used by ZED vdev matching for auto-{online,expand,replace} */ int zfs_device_get_devid(struct udev_device *dev, char *bufptr, size_t buflen) { struct udev_list_entry *entry; const char *bus; char devbyid[MAXPATHLEN]; /* The bus based by-id path is preferred */ bus = udev_device_get_property_value(dev, "ID_BUS"); if (bus == NULL) { const char *dm_uuid; /* * For multipath nodes use the persistent uuid based identifier * * Example: /dev/disk/by-id/dm-uuid-mpath-35000c5006304de3f */ dm_uuid = udev_device_get_property_value(dev, "DM_UUID"); if (dm_uuid != NULL) { (void) snprintf(bufptr, buflen, "dm-uuid-%s", dm_uuid); return (0); } /* * For volumes use the persistent /dev/zvol/dataset identifier */ entry = udev_device_get_devlinks_list_entry(dev); while (entry != NULL) { const char *name; name = udev_list_entry_get_name(entry); if (strncmp(name, ZVOL_ROOT, strlen(ZVOL_ROOT)) == 0) { (void) strlcpy(bufptr, name, buflen); return (0); } entry = udev_list_entry_get_next(entry); } /* * NVME 'by-id' symlinks are similar to bus case */ struct udev_device *parent; parent = udev_device_get_parent_with_subsystem_devtype(dev, "nvme", NULL); if (parent != NULL) bus = "nvme"; /* continue with bus symlink search */ else return (ENODATA); } /* * locate the bus specific by-id link */ (void) snprintf(devbyid, sizeof (devbyid), "%s%s-", DEV_BYID_PATH, bus); entry = udev_device_get_devlinks_list_entry(dev); while (entry != NULL) { const char *name; name = udev_list_entry_get_name(entry); if (strncmp(name, devbyid, strlen(devbyid)) == 0) { name += strlen(DEV_BYID_PATH); (void) strlcpy(bufptr, name, buflen); return (0); } entry = udev_list_entry_get_next(entry); } return (ENODATA); } /* * Obtain the persistent physical location string (describes where) * * used by ZED vdev matching for auto-{online,expand,replace} */ int zfs_device_get_physical(struct udev_device *dev, char *bufptr, size_t buflen) { const char *physpath = NULL; struct udev_list_entry *entry; /* * Normal disks use ID_PATH for their physical path. */ physpath = udev_device_get_property_value(dev, "ID_PATH"); if (physpath != NULL && strlen(physpath) > 0) { (void) strlcpy(bufptr, physpath, buflen); return (0); } /* * Device mapper devices are virtual and don't have a physical * path. For them we use ID_VDEV instead, which is setup via the * /etc/vdev_id.conf file. ID_VDEV provides a persistent path * to a virtual device. If you don't have vdev_id.conf setup, * you cannot use multipath autoreplace with device mapper. */ physpath = udev_device_get_property_value(dev, "ID_VDEV"); if (physpath != NULL && strlen(physpath) > 0) { (void) strlcpy(bufptr, physpath, buflen); return (0); } /* * For ZFS volumes use the persistent /dev/zvol/dataset identifier */ entry = udev_device_get_devlinks_list_entry(dev); while (entry != NULL) { physpath = udev_list_entry_get_name(entry); if (strncmp(physpath, ZVOL_ROOT, strlen(ZVOL_ROOT)) == 0) { (void) strlcpy(bufptr, physpath, buflen); return (0); } entry = udev_list_entry_get_next(entry); } /* * For all other devices fallback to using the by-uuid name. */ entry = udev_device_get_devlinks_list_entry(dev); while (entry != NULL) { physpath = udev_list_entry_get_name(entry); if (strncmp(physpath, "/dev/disk/by-uuid", 17) == 0) { (void) strlcpy(bufptr, physpath, buflen); return (0); } entry = udev_list_entry_get_next(entry); } return (ENODATA); } /* * A disk is considered a multipath whole disk when: * DEVNAME key value has "dm-" * DM_NAME key value has "mpath" prefix * DM_UUID key exists * ID_PART_TABLE_TYPE key does not exist or is not gpt */ static boolean_t udev_mpath_whole_disk(struct udev_device *dev) { const char *devname, *type, *uuid; devname = udev_device_get_property_value(dev, "DEVNAME"); type = udev_device_get_property_value(dev, "ID_PART_TABLE_TYPE"); uuid = udev_device_get_property_value(dev, "DM_UUID"); if ((devname != NULL && strncmp(devname, "/dev/dm-", 8) == 0) && ((type == NULL) || (strcmp(type, "gpt") != 0)) && (uuid != NULL)) { return (B_TRUE); } return (B_FALSE); } static int udev_device_is_ready(struct udev_device *dev) { #ifdef HAVE_LIBUDEV_UDEV_DEVICE_GET_IS_INITIALIZED return (udev_device_get_is_initialized(dev)); #else /* wait for DEVLINKS property to be initialized */ return (udev_device_get_property_value(dev, "DEVLINKS") != NULL); #endif } #else int zfs_device_get_devid(struct udev_device *dev, char *bufptr, size_t buflen) { (void) dev, (void) bufptr, (void) buflen; return (ENODATA); } int zfs_device_get_physical(struct udev_device *dev, char *bufptr, size_t buflen) { (void) dev, (void) bufptr, (void) buflen; return (ENODATA); } #endif /* HAVE_LIBUDEV */ /* * Wait up to timeout_ms for udev to set up the device node. The device is * considered ready when libudev determines it has been initialized, all of * the device links have been verified to exist, and it has been allowed to - * settle. At this point the device the device can be accessed reliably. - * Depending on the complexity of the udev rules this process could take - * several seconds. + * settle. At this point the device can be accessed reliably. Depending on + * the complexity of the udev rules this process could take several seconds. */ int zpool_label_disk_wait(const char *path, int timeout_ms) { #ifdef HAVE_LIBUDEV struct udev *udev; struct udev_device *dev = NULL; char nodepath[MAXPATHLEN]; char *sysname = NULL; int ret = ENODEV; int settle_ms = 50; long sleep_ms = 10; hrtime_t start, settle; if ((udev = udev_new()) == NULL) return (ENXIO); start = gethrtime(); settle = 0; do { if (sysname == NULL) { if (realpath(path, nodepath) != NULL) { sysname = strrchr(nodepath, '/') + 1; } else { (void) usleep(sleep_ms * MILLISEC); continue; } } dev = udev_device_new_from_subsystem_sysname(udev, "block", sysname); if ((dev != NULL) && udev_device_is_ready(dev)) { struct udev_list_entry *links, *link = NULL; ret = 0; links = udev_device_get_devlinks_list_entry(dev); udev_list_entry_foreach(link, links) { struct stat64 statbuf; const char *name; name = udev_list_entry_get_name(link); errno = 0; if (stat64(name, &statbuf) == 0 && errno == 0) continue; settle = 0; ret = ENODEV; break; } if (ret == 0) { if (settle == 0) { settle = gethrtime(); } else if (NSEC2MSEC(gethrtime() - settle) >= settle_ms) { udev_device_unref(dev); break; } } } udev_device_unref(dev); (void) usleep(sleep_ms * MILLISEC); } while (NSEC2MSEC(gethrtime() - start) < timeout_ms); udev_unref(udev); return (ret); #else int settle_ms = 50; long sleep_ms = 10; hrtime_t start, settle; struct stat64 statbuf; start = gethrtime(); settle = 0; do { errno = 0; if ((stat64(path, &statbuf) == 0) && (errno == 0)) { if (settle == 0) settle = gethrtime(); else if (NSEC2MSEC(gethrtime() - settle) >= settle_ms) return (0); } else if (errno != ENOENT) { return (errno); } usleep(sleep_ms * MILLISEC); } while (NSEC2MSEC(gethrtime() - start) < timeout_ms); return (ENODEV); #endif /* HAVE_LIBUDEV */ } /* * Encode the persistent devices strings * used for the vdev disk label */ static int encode_device_strings(const char *path, vdev_dev_strs_t *ds, boolean_t wholedisk) { #ifdef HAVE_LIBUDEV struct udev *udev; struct udev_device *dev = NULL; char nodepath[MAXPATHLEN]; char *sysname; int ret = ENODEV; hrtime_t start; if ((udev = udev_new()) == NULL) return (ENXIO); /* resolve path to a runtime device node instance */ if (realpath(path, nodepath) == NULL) goto no_dev; sysname = strrchr(nodepath, '/') + 1; /* * Wait up to 3 seconds for udev to set up the device node context */ start = gethrtime(); do { dev = udev_device_new_from_subsystem_sysname(udev, "block", sysname); if (dev == NULL) goto no_dev; if (udev_device_is_ready(dev)) break; /* udev ready */ udev_device_unref(dev); dev = NULL; if (NSEC2MSEC(gethrtime() - start) < 10) (void) sched_yield(); /* yield/busy wait up to 10ms */ else (void) usleep(10 * MILLISEC); } while (NSEC2MSEC(gethrtime() - start) < (3 * MILLISEC)); if (dev == NULL) goto no_dev; /* * Only whole disks require extra device strings */ if (!wholedisk && !udev_mpath_whole_disk(dev)) goto no_dev; ret = zfs_device_get_devid(dev, ds->vds_devid, sizeof (ds->vds_devid)); if (ret != 0) goto no_dev_ref; /* physical location string (optional) */ if (zfs_device_get_physical(dev, ds->vds_devphys, sizeof (ds->vds_devphys)) != 0) { ds->vds_devphys[0] = '\0'; /* empty string --> not available */ } no_dev_ref: udev_device_unref(dev); no_dev: udev_unref(udev); return (ret); #else (void) path; (void) ds; (void) wholedisk; return (ENOENT); #endif } /* * Rescan the enclosure sysfs path for turning on enclosure LEDs and store it * in the nvlist * (if applicable). Like: * vdev_enc_sysfs_path: '/sys/class/enclosure/11:0:1:0/SLOT 4' */ static void update_vdev_config_dev_sysfs_path(nvlist_t *nv, const char *path) { char *upath, *spath; /* Add enclosure sysfs path (if disk is in an enclosure). */ upath = zfs_get_underlying_path(path); spath = zfs_get_enclosure_sysfs_path(upath); if (spath) { nvlist_add_string(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH, spath); } else { nvlist_remove_all(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH); } free(upath); free(spath); } /* * This will get called for each leaf vdev. */ static int sysfs_path_pool_vdev_iter_f(void *hdl_data, nvlist_t *nv, void *data) { (void) hdl_data, (void) data; const char *path = NULL; if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) != 0) return (1); /* Rescan our enclosure sysfs path for this vdev */ update_vdev_config_dev_sysfs_path(nv, path); return (0); } /* * Given an nvlist for our pool (with vdev tree), iterate over all the * leaf vdevs and update their ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH. */ void update_vdevs_config_dev_sysfs_path(nvlist_t *config) { nvlist_t *nvroot = NULL; verify(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0); for_each_vdev_in_nvlist(nvroot, sysfs_path_pool_vdev_iter_f, NULL); } /* * Update a leaf vdev's persistent device strings * * - only applies for a dedicated leaf vdev (aka whole disk) * - updated during pool create|add|attach|import * - used for matching device matching during auto-{online,expand,replace} * - stored in a leaf disk config label (i.e. alongside 'path' NVP) * - these strings are currently not used in kernel (i.e. for vdev_disk_open) * * single device node example: * devid: 'scsi-MG03SCA300_350000494a8cb3d67-part1' * phys_path: 'pci-0000:04:00.0-sas-0x50000394a8cb3d67-lun-0' * * multipath device node example: * devid: 'dm-uuid-mpath-35000c5006304de3f' * * We also store the enclosure sysfs path for turning on enclosure LEDs * (if applicable): * vdev_enc_sysfs_path: '/sys/class/enclosure/11:0:1:0/SLOT 4' */ void update_vdev_config_dev_strs(nvlist_t *nv) { vdev_dev_strs_t vds; const char *env, *type, *path; uint64_t wholedisk = 0; /* * For the benefit of legacy ZFS implementations, allow * for opting out of devid strings in the vdev label. * * example use: * env ZFS_VDEV_DEVID_OPT_OUT=YES zpool import dozer * * explanation: * Older OpenZFS implementations had issues when attempting to * display pool config VDEV names if a "devid" NVP value is * present in the pool's config. * * For example, a pool that originated on illumos platform would * have a devid value in the config and "zpool status" would fail * when listing the config. * * A pool can be stripped of any "devid" values on import or * prevented from adding them on zpool create|add by setting * ZFS_VDEV_DEVID_OPT_OUT. */ env = getenv("ZFS_VDEV_DEVID_OPT_OUT"); if (env && (strtoul(env, NULL, 0) > 0 || !strncasecmp(env, "YES", 3) || !strncasecmp(env, "ON", 2))) { (void) nvlist_remove_all(nv, ZPOOL_CONFIG_DEVID); (void) nvlist_remove_all(nv, ZPOOL_CONFIG_PHYS_PATH); return; } if (nvlist_lookup_string(nv, ZPOOL_CONFIG_TYPE, &type) != 0 || strcmp(type, VDEV_TYPE_DISK) != 0) { return; } if (nvlist_lookup_string(nv, ZPOOL_CONFIG_PATH, &path) != 0) return; (void) nvlist_lookup_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK, &wholedisk); /* * Update device string values in the config nvlist. */ if (encode_device_strings(path, &vds, (boolean_t)wholedisk) == 0) { (void) nvlist_add_string(nv, ZPOOL_CONFIG_DEVID, vds.vds_devid); if (vds.vds_devphys[0] != '\0') { (void) nvlist_add_string(nv, ZPOOL_CONFIG_PHYS_PATH, vds.vds_devphys); } update_vdev_config_dev_sysfs_path(nv, path); } else { /* Clear out any stale entries. */ (void) nvlist_remove_all(nv, ZPOOL_CONFIG_DEVID); (void) nvlist_remove_all(nv, ZPOOL_CONFIG_PHYS_PATH); (void) nvlist_remove_all(nv, ZPOOL_CONFIG_VDEV_ENC_SYSFS_PATH); } } diff --git a/tests/runfiles/linux.run b/tests/runfiles/linux.run index 2252e46df3a8..8bc55a1b4b47 100644 --- a/tests/runfiles/linux.run +++ b/tests/runfiles/linux.run @@ -1,228 +1,228 @@ # # This file and its contents are supplied under the terms of the # Common Development and Distribution License ("CDDL"), version 1.0. # You may only use this file in accordance with the terms of version # 1.0 of the CDDL. # # A full copy of the text of the CDDL should have accompanied this # source. A copy of the CDDL is also available via the Internet at # http://www.illumos.org/license/CDDL. # [DEFAULT] pre = setup quiet = False pre_user = root user = root timeout = 600 post_user = root post = cleanup failsafe_user = root failsafe = callbacks/zfs_failsafe outputdir = /var/tmp/test_results tags = ['functional'] [tests/functional/acl/posix:Linux] tests = ['posix_001_pos', 'posix_002_pos', 'posix_003_pos', 'posix_004_pos'] tags = ['functional', 'acl', 'posix'] [tests/functional/acl/posix-sa:Linux] tests = ['posix_001_pos', 'posix_002_pos', 'posix_003_pos', 'posix_004_pos'] tags = ['functional', 'acl', 'posix-sa'] [tests/functional/atime:Linux] tests = ['atime_003_pos', 'root_relatime_on'] tags = ['functional', 'atime'] [tests/functional/block_cloning:Linux] tests = ['block_cloning_copyfilerange', 'block_cloning_copyfilerange_partial', 'block_cloning_copyfilerange_fallback', 'block_cloning_ficlone', 'block_cloning_ficlonerange', 'block_cloning_ficlonerange_partial', 'block_cloning_disabled_copyfilerange', 'block_cloning_disabled_ficlone', 'block_cloning_disabled_ficlonerange', 'block_cloning_copyfilerange_cross_dataset', 'block_cloning_copyfilerange_fallback_same_txg'] tags = ['functional', 'block_cloning'] [tests/functional/chattr:Linux] tests = ['chattr_001_pos', 'chattr_002_neg'] tags = ['functional', 'chattr'] [tests/functional/cli_root/zfs:Linux] tests = ['zfs_003_neg'] tags = ['functional', 'cli_root', 'zfs'] [tests/functional/cli_root/zfs_mount:Linux] tests = ['zfs_mount_006_pos', 'zfs_mount_008_pos', 'zfs_mount_013_pos', 'zfs_mount_014_neg', 'zfs_multi_mount'] tags = ['functional', 'cli_root', 'zfs_mount'] [tests/functional/cli_root/zfs_share:Linux] tests = ['zfs_share_005_pos', 'zfs_share_007_neg', 'zfs_share_009_neg', 'zfs_share_012_pos', 'zfs_share_013_pos'] tags = ['functional', 'cli_root', 'zfs_share'] [tests/functional/cli_root/zfs_unshare:Linux] tests = ['zfs_unshare_008_pos'] tags = ['functional', 'cli_root', 'zfs_unshare'] [tests/functional/cli_root/zfs_sysfs:Linux] tests = ['zfeature_set_unsupported', 'zfs_get_unsupported', 'zfs_set_unsupported', 'zfs_sysfs_live', 'zpool_get_unsupported', 'zpool_set_unsupported'] tags = ['functional', 'cli_root', 'zfs_sysfs'] [tests/functional/cli_root/zpool_add:Linux] tests = ['add_nested_replacing_spare'] tags = ['functional', 'cli_root', 'zpool_add'] [tests/functional/cli_root/zpool_expand:Linux] tests = ['zpool_expand_001_pos', 'zpool_expand_002_pos', 'zpool_expand_003_neg', 'zpool_expand_004_pos', 'zpool_expand_005_pos'] tags = ['functional', 'cli_root', 'zpool_expand'] [tests/functional/cli_root/zpool_import:Linux] tests = ['zpool_import_hostid_changed', 'zpool_import_hostid_changed_unclean_export', 'zpool_import_hostid_changed_cachefile', 'zpool_import_hostid_changed_cachefile_unclean_export'] tags = ['functional', 'cli_root', 'zpool_import'] [tests/functional/cli_root/zpool_reopen:Linux] tests = ['zpool_reopen_001_pos', 'zpool_reopen_002_pos', 'zpool_reopen_003_pos', 'zpool_reopen_004_pos', 'zpool_reopen_005_pos', 'zpool_reopen_006_neg', 'zpool_reopen_007_pos'] tags = ['functional', 'cli_root', 'zpool_reopen'] [tests/functional/cli_root/zpool_split:Linux] tests = ['zpool_split_wholedisk'] tags = ['functional', 'cli_root', 'zpool_split'] [tests/functional/compression:Linux] tests = ['compress_004_pos'] tags = ['functional', 'compression'] [tests/functional/devices:Linux] tests = ['devices_001_pos', 'devices_002_neg', 'devices_003_pos'] tags = ['functional', 'devices'] [tests/functional/events:Linux] tests = ['events_001_pos', 'events_002_pos', 'zed_rc_filter', 'zed_fd_spill', 'zed_cksum_reported', 'zed_cksum_config', 'zed_io_config'] tags = ['functional', 'events'] [tests/functional/fadvise:Linux] tests = ['fadvise_sequential'] tags = ['functional', 'fadvise'] [tests/functional/fallocate:Linux] tests = ['fallocate_prealloc', 'fallocate_zero-range'] tags = ['functional', 'fallocate'] [tests/functional/fault:Linux] tests = ['auto_offline_001_pos', 'auto_online_001_pos', 'auto_online_002_pos', - 'auto_replace_001_pos', 'auto_spare_001_pos', 'auto_spare_002_pos', - 'auto_spare_multiple', 'auto_spare_ashift', 'auto_spare_shared', - 'decrypt_fault', 'decompress_fault', 'scrub_after_resilver', - 'zpool_status_-s'] + 'auto_replace_001_pos', 'auto_replace_002_pos', 'auto_spare_001_pos', + 'auto_spare_002_pos', 'auto_spare_multiple', 'auto_spare_ashift', + 'auto_spare_shared', 'decrypt_fault', 'decompress_fault', + 'scrub_after_resilver', 'zpool_status_-s'] tags = ['functional', 'fault'] [tests/functional/features/large_dnode:Linux] tests = ['large_dnode_002_pos', 'large_dnode_006_pos', 'large_dnode_008_pos'] tags = ['functional', 'features', 'large_dnode'] [tests/functional/io:Linux] tests = ['libaio', 'io_uring'] tags = ['functional', 'io'] [tests/functional/largest_pool:Linux] tests = ['largest_pool_001_pos'] pre = post = tags = ['functional', 'largest_pool'] [tests/functional/mmap:Linux] tests = ['mmap_libaio_001_pos', 'mmap_sync_001_pos'] tags = ['functional', 'mmap'] [tests/functional/mmp:Linux] tests = ['mmp_on_thread', 'mmp_on_uberblocks', 'mmp_on_off', 'mmp_interval', 'mmp_active_import', 'mmp_inactive_import', 'mmp_exported_import', 'mmp_write_uberblocks', 'mmp_reset_interval', 'multihost_history', 'mmp_on_zdb', 'mmp_write_distribution', 'mmp_hostid'] tags = ['functional', 'mmp'] [tests/functional/mount:Linux] tests = ['umount_unlinked_drain'] tags = ['functional', 'mount'] [tests/functional/pam:Linux] tests = ['pam_basic', 'pam_change_unmounted', 'pam_nounmount', 'pam_recursive', 'pam_short_password'] tags = ['functional', 'pam'] [tests/functional/procfs:Linux] tests = ['procfs_list_basic', 'procfs_list_concurrent_readers', 'procfs_list_stale_read', 'pool_state'] tags = ['functional', 'procfs'] [tests/functional/projectquota:Linux] tests = ['projectid_001_pos', 'projectid_002_pos', 'projectid_003_pos', 'projectquota_001_pos', 'projectquota_002_pos', 'projectquota_003_pos', 'projectquota_004_neg', 'projectquota_005_pos', 'projectquota_006_pos', 'projectquota_007_pos', 'projectquota_008_pos', 'projectquota_009_pos', 'projectspace_001_pos', 'projectspace_002_pos', 'projectspace_003_pos', 'projectspace_004_pos', 'projecttree_001_pos', 'projecttree_002_pos', 'projecttree_003_neg'] tags = ['functional', 'projectquota'] [tests/functional/dos_attributes:Linux] tests = ['read_dos_attrs_001', 'write_dos_attrs_001'] tags = ['functional', 'dos_attributes'] [tests/functional/renameat2:Linux] tests = ['renameat2_noreplace', 'renameat2_exchange', 'renameat2_whiteout'] tags = ['functional', 'renameat2'] [tests/functional/rsend:Linux] tests = ['send_realloc_dnode_size', 'send_encrypted_files'] tags = ['functional', 'rsend'] [tests/functional/simd:Linux] pre = post = tests = ['simd_supported'] tags = ['functional', 'simd'] [tests/functional/snapshot:Linux] tests = ['snapshot_015_pos', 'snapshot_016_pos'] tags = ['functional', 'snapshot'] [tests/functional/tmpfile:Linux] tests = ['tmpfile_001_pos', 'tmpfile_002_pos', 'tmpfile_003_pos', 'tmpfile_stat_mode'] tags = ['functional', 'tmpfile'] [tests/functional/upgrade:Linux] tests = ['upgrade_projectquota_001_pos'] tags = ['functional', 'upgrade'] [tests/functional/user_namespace:Linux] tests = ['user_namespace_001', 'user_namespace_002', 'user_namespace_003', 'user_namespace_004'] tags = ['functional', 'user_namespace'] [tests/functional/userquota:Linux] tests = ['groupspace_001_pos', 'groupspace_002_pos', 'groupspace_003_pos', 'userquota_013_pos', 'userspace_003_pos'] tags = ['functional', 'userquota'] [tests/functional/zvol/zvol_misc:Linux] tests = ['zvol_misc_fua'] tags = ['functional', 'zvol', 'zvol_misc'] [tests/functional/idmap_mount:Linux] tests = ['idmap_mount_001', 'idmap_mount_002', 'idmap_mount_003', 'idmap_mount_004', 'idmap_mount_005'] tags = ['functional', 'idmap_mount'] diff --git a/tests/test-runner/bin/zts-report.py.in b/tests/test-runner/bin/zts-report.py.in index 5d1360380de5..4608e87522a3 100755 --- a/tests/test-runner/bin/zts-report.py.in +++ b/tests/test-runner/bin/zts-report.py.in @@ -1,475 +1,476 @@ #!/usr/bin/env @PYTHON_SHEBANG@ # # This file and its contents are supplied under the terms of the # Common Development and Distribution License ("CDDL"), version 1.0. # You may only use this file in accordance with the terms of version # 1.0 of the CDDL. # # A full copy of the text of the CDDL should have accompanied this # source. A copy of the CDDL is also available via the Internet at # http://www.illumos.org/license/CDDL. # # # Copyright (c) 2017 by Delphix. All rights reserved. # Copyright (c) 2018 by Lawrence Livermore National Security, LLC. # # This script must remain compatible with Python 3.6+. # import os import re import sys import argparse # # This script parses the stdout of zfstest, which has this format: # # Test: /path/to/testa (run as root) [00:00] [PASS] # Test: /path/to/testb (run as jkennedy) [00:00] [PASS] # Test: /path/to/testc (run as root) [00:00] [FAIL] # [...many more results...] # # Results Summary # FAIL 22 # SKIP 32 # PASS 1156 # # Running Time: 02:50:31 # Percent passed: 95.5% # Log directory: /var/tmp/test_results/20180615T205926 # # # Common generic reasons for a test or test group to be skipped. # # Some test cases are known to fail in ways which are not harmful or dangerous. # In these cases simply mark the test as a known failure until it can be # updated and the issue resolved. Note that it's preferable to open a unique # issue on the GitHub issue tracker for each test case failure. # known_reason = 'Known issue' # # Some tests require that a test user be able to execute the zfs utilities. # This may not be possible when testing in-tree due to the default permissions # on the user's home directory. When testing this can be resolved by granting # group read access. # # chmod 0750 $HOME # exec_reason = 'Test user execute permissions required for utilities' # # Some tests require that the kernel supports renameat2 syscall. # renameat2_reason = 'Kernel renameat2 support required' # # Some tests require the O_TMPFILE flag which was first introduced in the # 3.11 kernel. # tmpfile_reason = 'Kernel O_TMPFILE support required' # # Some tests require the statx(2) system call on Linux which was first # introduced in the 4.11 kernel. # statx_reason = 'Kernel statx(2) system call required on Linux' # # Some tests require that the lsattr utility support the project id feature. # project_id_reason = 'lsattr with set/show project ID required' # # Some tests require that the kernel support user namespaces. # user_ns_reason = 'Kernel user namespace support required' # # Some rewind tests can fail since nothing guarantees that old MOS blocks # are not overwritten. Snapshots protect datasets and data files but not # the MOS. Reasonable efforts are made in the test case to increase the # odds that some txgs will have their MOS data left untouched, but it is # never a sure thing. # rewind_reason = 'Arbitrary pool rewind is not guaranteed' # # Some tests require a minimum version of the fio benchmark utility. # Older distributions such as CentOS 6.x only provide fio-2.0.13. # fio_reason = 'Fio v2.3 or newer required' # # Some tests require that the DISKS provided support the discard operation. # Normally this is not an issue because loop back devices are used for DISKS # and they support discard (TRIM/UNMAP). # trim_reason = 'DISKS must support discard (TRIM/UNMAP)' # # Some tests on FreeBSD require the fspacectl(2) system call and the # truncate(1) utility supporting the -d option. The system call was first # introduced in FreeBSD version 1400032. # fspacectl_reason = 'fspacectl(2) and truncate -d support required' # # Some tests are not applicable to a platform or need to be updated to operate # in the manor required by the platform. Any tests which are skipped for this # reason will be suppressed in the final analysis output. # na_reason = "Not applicable" # # Some test cases doesn't have all requirements to run on Github actions CI. # ci_reason = 'CI runner doesn\'t have all requirements' # # Idmapped mount is only supported in kernel version >= 5.12 # idmap_reason = 'Idmapped mount needs kernel 5.12+' # # copy_file_range() is not supported by all kernels # cfr_reason = 'Kernel copy_file_range support required' cfr_cross_reason = 'copy_file_range(2) cross-filesystem needs kernel 5.3+' # # These tests are known to fail, thus we use this list to prevent these # failures from failing the job as a whole; only unexpected failures # bubble up to cause this script to exit with a non-zero exit status. # # Format: { 'test-name': ['expected result', 'issue-number | reason'] } # # For each known failure it is recommended to link to a GitHub issue by # setting the reason to the issue number. Alternately, one of the generic # reasons listed above can be used. # known = { 'casenorm/mixed_none_lookup_ci': ['FAIL', 7633], 'casenorm/mixed_formd_lookup_ci': ['FAIL', 7633], 'cli_root/zpool_import/import_rewind_device_replaced': ['FAIL', rewind_reason], 'cli_user/misc/zfs_share_001_neg': ['SKIP', na_reason], 'cli_user/misc/zfs_unshare_001_neg': ['SKIP', na_reason], 'pool_checkpoint/checkpoint_discard_busy': ['SKIP', 12053], 'privilege/setup': ['SKIP', na_reason], 'refreserv/refreserv_004_pos': ['FAIL', known_reason], 'rootpool/setup': ['SKIP', na_reason], 'rsend/rsend_008_pos': ['SKIP', 6066], 'vdev_zaps/vdev_zaps_007_pos': ['FAIL', known_reason], } if sys.platform.startswith('freebsd'): known.update({ 'cli_root/zfs_receive/receive-o-x_props_override': ['FAIL', known_reason], 'cli_root/zpool_resilver/zpool_resilver_concurrent': ['SKIP', na_reason], 'cli_root/zpool_wait/zpool_wait_trim_basic': ['SKIP', trim_reason], 'cli_root/zpool_wait/zpool_wait_trim_cancel': ['SKIP', trim_reason], 'cli_root/zpool_wait/zpool_wait_trim_flag': ['SKIP', trim_reason], 'cli_root/zfs_unshare/zfs_unshare_008_pos': ['SKIP', na_reason], 'link_count/link_count_001': ['SKIP', na_reason], 'casenorm/mixed_create_failure': ['FAIL', 13215], 'mmap/mmap_sync_001_pos': ['SKIP', na_reason], 'rsend/send_raw_ashift': ['SKIP', 14961], }) elif sys.platform.startswith('linux'): known.update({ 'casenorm/mixed_formd_lookup': ['FAIL', 7633], 'casenorm/mixed_formd_delete': ['FAIL', 7633], 'casenorm/sensitive_formd_lookup': ['FAIL', 7633], 'casenorm/sensitive_formd_delete': ['FAIL', 7633], 'removal/removal_with_zdb': ['SKIP', known_reason], 'cli_root/zfs_unshare/zfs_unshare_002_pos': ['SKIP', na_reason], }) # # These tests may occasionally fail or be skipped. We want there failures # to be reported but only unexpected failures should bubble up to cause # this script to exit with a non-zero exit status. # # Format: { 'test-name': ['expected result', 'issue-number | reason'] } # # For each known failure it is recommended to link to a GitHub issue by # setting the reason to the issue number. Alternately, one of the generic # reasons listed above can be used. # maybe = { 'append/threadsappend_001_pos': ['FAIL', 6136], 'chattr/setup': ['SKIP', exec_reason], 'crtime/crtime_001_pos': ['SKIP', statx_reason], 'cli_root/zdb/zdb_006_pos': ['FAIL', known_reason], 'cli_root/zfs_destroy/zfs_destroy_dev_removal_condense': ['FAIL', known_reason], 'cli_root/zfs_get/zfs_get_004_pos': ['FAIL', known_reason], 'cli_root/zfs_get/zfs_get_009_pos': ['SKIP', 5479], 'cli_root/zfs_rollback/zfs_rollback_001_pos': ['FAIL', known_reason], 'cli_root/zfs_rollback/zfs_rollback_002_pos': ['FAIL', known_reason], 'cli_root/zfs_share/zfs_share_concurrent_shares': ['FAIL', known_reason], 'cli_root/zfs_snapshot/zfs_snapshot_002_neg': ['FAIL', known_reason], 'cli_root/zfs_unshare/zfs_unshare_006_pos': ['SKIP', na_reason], 'cli_root/zpool_add/zpool_add_004_pos': ['FAIL', known_reason], 'cli_root/zpool_destroy/zpool_destroy_001_pos': ['SKIP', 6145], 'cli_root/zpool_import/zpool_import_missing_003_pos': ['SKIP', 6839], 'cli_root/zpool_initialize/zpool_initialize_import_export': ['FAIL', 11948], 'cli_root/zpool_labelclear/zpool_labelclear_removed': ['FAIL', known_reason], 'cli_root/zpool_trim/setup': ['SKIP', trim_reason], 'cli_root/zpool_upgrade/zpool_upgrade_004_pos': ['FAIL', 6141], 'delegate/setup': ['SKIP', exec_reason], 'fallocate/fallocate_punch-hole': ['SKIP', fspacectl_reason], 'history/history_004_pos': ['FAIL', 7026], 'history/history_005_neg': ['FAIL', 6680], 'history/history_006_neg': ['FAIL', 5657], 'history/history_008_pos': ['FAIL', known_reason], 'history/history_010_pos': ['SKIP', exec_reason], 'io/mmap': ['SKIP', fio_reason], 'largest_pool/largest_pool_001_pos': ['FAIL', known_reason], 'mmp/mmp_on_uberblocks': ['FAIL', known_reason], 'pam/setup': ['SKIP', "pamtester might be not available"], 'pool_checkpoint/checkpoint_discard_busy': ['FAIL', 11946], 'projectquota/setup': ['SKIP', exec_reason], 'removal/removal_condense_export': ['FAIL', known_reason], 'renameat2/setup': ['SKIP', renameat2_reason], 'reservation/reservation_008_pos': ['FAIL', 7741], 'reservation/reservation_018_pos': ['FAIL', 5642], 'snapshot/clone_001_pos': ['FAIL', known_reason], 'snapshot/snapshot_009_pos': ['FAIL', 7961], 'snapshot/snapshot_010_pos': ['FAIL', 7961], 'snapused/snapused_004_pos': ['FAIL', 5513], 'tmpfile/setup': ['SKIP', tmpfile_reason], 'trim/setup': ['SKIP', trim_reason], 'upgrade/upgrade_projectquota_001_pos': ['SKIP', project_id_reason], 'user_namespace/setup': ['SKIP', user_ns_reason], 'userquota/setup': ['SKIP', exec_reason], 'vdev_zaps/vdev_zaps_004_pos': ['FAIL', known_reason], 'zvol/zvol_ENOSPC/zvol_ENOSPC_001_pos': ['FAIL', 5848], } if sys.platform.startswith('freebsd'): maybe.update({ 'cli_root/zfs_copies/zfs_copies_002_pos': ['FAIL', known_reason], 'cli_root/zfs_inherit/zfs_inherit_001_neg': ['FAIL', known_reason], 'cli_root/zpool_import/zpool_import_012_pos': ['FAIL', known_reason], 'delegate/zfs_allow_003_pos': ['FAIL', known_reason], 'inheritance/inherit_001_pos': ['FAIL', 11829], 'resilver/resilver_restart_001': ['FAIL', known_reason], 'pool_checkpoint/checkpoint_big_rewind': ['FAIL', 12622], 'pool_checkpoint/checkpoint_indirect': ['FAIL', 12623], 'snapshot/snapshot_002_pos': ['FAIL', '14831'], }) elif sys.platform.startswith('linux'): maybe.update({ 'cli_root/zfs_rename/zfs_rename_002_pos': ['FAIL', known_reason], 'cli_root/zpool_reopen/zpool_reopen_003_pos': ['FAIL', known_reason], 'fault/auto_online_002_pos': ['FAIL', 11889], 'fault/auto_replace_001_pos': ['FAIL', 14851], 'fault/auto_spare_002_pos': ['FAIL', 11889], 'fault/auto_spare_multiple': ['FAIL', 11889], 'fault/auto_spare_shared': ['FAIL', 11889], 'fault/decompress_fault': ['FAIL', 11889], 'io/io_uring': ['SKIP', 'io_uring support required'], 'limits/filesystem_limit': ['SKIP', known_reason], 'limits/snapshot_limit': ['SKIP', known_reason], 'mmp/mmp_active_import': ['FAIL', known_reason], 'mmp/mmp_exported_import': ['FAIL', known_reason], 'mmp/mmp_inactive_import': ['FAIL', known_reason], 'zvol/zvol_misc/zvol_misc_snapdev': ['FAIL', 12621], 'zvol/zvol_misc/zvol_misc_volmode': ['FAIL', known_reason], 'zvol/zvol_misc/zvol_misc_fua': ['SKIP', 14872], 'zvol/zvol_misc/zvol_misc_trim': ['SKIP', 14872], 'idmap_mount/idmap_mount_001': ['SKIP', idmap_reason], 'idmap_mount/idmap_mount_002': ['SKIP', idmap_reason], 'idmap_mount/idmap_mount_003': ['SKIP', idmap_reason], 'idmap_mount/idmap_mount_004': ['SKIP', idmap_reason], 'idmap_mount/idmap_mount_005': ['SKIP', idmap_reason], 'block_cloning/block_cloning_disabled_copyfilerange': ['SKIP', cfr_reason], 'block_cloning/block_cloning_copyfilerange': ['SKIP', cfr_reason], 'block_cloning/block_cloning_copyfilerange_partial': ['SKIP', cfr_reason], 'block_cloning/block_cloning_copyfilerange_fallback': ['SKIP', cfr_reason], 'block_cloning/block_cloning_copyfilerange_cross_dataset': ['SKIP', cfr_cross_reason], 'block_cloning/block_cloning_copyfilerange_fallback_same_txg': ['SKIP', cfr_cross_reason], }) # Not all Github actions runners have scsi_debug module, so we may skip # some tests which use it. if os.environ.get('CI') == 'true': known.update({ 'cli_root/zpool_expand/zpool_expand_001_pos': ['SKIP', ci_reason], 'cli_root/zpool_expand/zpool_expand_003_neg': ['SKIP', ci_reason], 'cli_root/zpool_expand/zpool_expand_005_pos': ['SKIP', ci_reason], 'cli_root/zpool_reopen/setup': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_001_pos': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_002_pos': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_003_pos': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_004_pos': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_005_pos': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_006_neg': ['SKIP', ci_reason], 'cli_root/zpool_reopen/zpool_reopen_007_pos': ['SKIP', ci_reason], 'cli_root/zpool_split/zpool_split_wholedisk': ['SKIP', ci_reason], 'fault/auto_offline_001_pos': ['SKIP', ci_reason], 'fault/auto_online_001_pos': ['SKIP', ci_reason], 'fault/auto_online_002_pos': ['SKIP', ci_reason], 'fault/auto_replace_001_pos': ['SKIP', ci_reason], + 'fault/auto_replace_002_pos': ['SKIP', ci_reason], 'fault/auto_spare_ashift': ['SKIP', ci_reason], 'fault/auto_spare_shared': ['SKIP', ci_reason], 'procfs/pool_state': ['SKIP', ci_reason], }) maybe.update({ 'events/events_002_pos': ['FAIL', 11546], }) def process_results(pathname): try: f = open(pathname) except IOError as e: print('Error opening file:', e) sys.exit(1) prefix = '/zfs-tests/tests/(?:functional|perf/regression)/' pattern = \ r'^Test(?:\s+\(\S+\))?:' + \ rf'\s*\S*{prefix}(\S+)' + \ r'\s*\(run as (\S+)\)\s*\[(\S+)\]\s*\[(\S+)\]' pattern_log = r'^\s*Log directory:\s*(\S*)' d = {} logdir = 'Could not determine log directory.' for line in f.readlines(): m = re.match(pattern, line) if m and len(m.groups()) == 4: d[m.group(1)] = m.group(4) continue m = re.match(pattern_log, line) if m: logdir = m.group(1) return d, logdir class ListMaybesAction(argparse.Action): def __init__(self, option_strings, dest="SUPPRESS", default="SUPPRESS", help="list flaky tests and exit"): super(ListMaybesAction, self).__init__( option_strings=option_strings, dest=dest, default=default, nargs=0, help=help) def __call__(self, parser, namespace, values, option_string=None): for test in maybe: print(test) sys.exit(0) if __name__ == "__main__": parser = argparse.ArgumentParser(description='Analyze ZTS logs') parser.add_argument('logfile') parser.add_argument('--list-maybes', action=ListMaybesAction) parser.add_argument('--no-maybes', action='store_false', dest='maybes') args = parser.parse_args() results, logdir = process_results(args.logfile) if not results: print("\n\nNo test results were found.") print("Log directory:", logdir) sys.exit(0) expected = [] unexpected = [] all_maybes = True for test in list(results.keys()): if results[test] == "PASS": continue setup = test.replace(os.path.basename(test), "setup") if results[test] == "SKIP" and test != setup: if setup in known and known[setup][0] == "SKIP": continue if setup in maybe and maybe[setup][0] == "SKIP": continue if (test in known and results[test] in known[test][0]): expected.append(test) elif test in maybe and results[test] in maybe[test][0]: if results[test] == 'SKIP' or args.maybes: expected.append(test) elif not args.maybes: unexpected.append(test) else: unexpected.append(test) all_maybes = False print("\nTests with results other than PASS that are expected:") for test in sorted(expected): issue_url = 'https://github.com/openzfs/zfs/issues/' # Include the reason why the result is expected, given the following: # 1. Suppress test results which set the "Not applicable" reason. # 2. Numerical reasons are assumed to be GitHub issue numbers. # 3. When an entire test group is skipped only report the setup reason. if test in known: if known[test][1] == na_reason: continue elif isinstance(known[test][1], int): expect = f"{issue_url}{known[test][1]}" else: expect = known[test][1] elif test in maybe: if isinstance(maybe[test][1], int): expect = f"{issue_url}{maybe[test][1]}" else: expect = maybe[test][1] elif setup in known and known[setup][0] == "SKIP" and setup != test: continue elif setup in maybe and maybe[setup][0] == "SKIP" and setup != test: continue else: expect = "UNKNOWN REASON" print(f" {results[test]} {test} ({expect})") print("\nTests with result of PASS that are unexpected:") for test in sorted(known.keys()): # We probably should not be silently ignoring the case # where "test" is not in "results". if test not in results or results[test] != "PASS": continue print(f" {results[test]} {test} (expected {known[test][0]})") print("\nTests with results other than PASS that are unexpected:") for test in sorted(unexpected): expect = "PASS" if test not in known else known[test][0] print(f" {results[test]} {test} (expected {expect})") if len(unexpected) == 0: sys.exit(0) elif not args.maybes and all_maybes: sys.exit(2) else: sys.exit(1) diff --git a/tests/zfs-tests/include/commands.cfg b/tests/zfs-tests/include/commands.cfg index fa545e06bbf3..648f2203dfba 100644 --- a/tests/zfs-tests/include/commands.cfg +++ b/tests/zfs-tests/include/commands.cfg @@ -1,233 +1,234 @@ # # Copyright (c) 2016, 2019 by Delphix. All rights reserved. # These variables are used by zfs-tests.sh to constrain which utilities # may be used by the suite. The suite will create a directory which is # the only element of $PATH and create symlinks from that dir to the # binaries listed below. # # Please keep the contents of each variable sorted for ease of reading # and maintenance. # export SYSTEM_FILES_COMMON='awk basename bc bunzip2 bzcat cat chgrp chmod chown cksum cmp cp cpio cut date dd df diff dirname dmesg du echo env expr false file find fio getconf getent getfacl grep gunzip gzip head hostname id iostat kill ksh ldd ln ls mkdir mknod mkfifo mktemp mount mv net od openssl pamtester pax pgrep ping pkill printf ps python3 readlink rm rmdir rsync scp script sed seq setfacl sh sleep sort ssh stat strings sudo swapoff swapon sync tail tar timeout touch tr true truncate umount uname uniq vmstat wc' export SYSTEM_FILES_FREEBSD='chflags compress diskinfo fsck getextattr gpart jail jexec jls lsextattr md5 mdconfig newfs pw rmextattr setextattr sha256 showmount swapctl sysctl trim uncompress' export SYSTEM_FILES_LINUX='attr blkid blkdiscard blockdev chattr exportfs fallocate + flock free getfattr groupadd groupdel groupmod hostid + logger losetup lsattr lsblk lscpu lsmod lsscsi md5sum mkswap modprobe + mountpoint mpstat nsenter parted perf setfattr + setpriv sha256sum udevadm unshare useradd userdel usermod - setpriv - mountpoint - flock - logger' + wipefs' export ZFS_FILES='zdb zfs zhack zinject zpool ztest raidz_test arc_summary arcstat zilstat dbufstat mount.zfs zed zgenhostid zstream zfs_ids_to_path zpool_influxdb' export ZFSTEST_FILES='badsend btree_test chg_usr_exec clonefile devname2devid dir_rd_update draid file_fadvise file_append file_check file_trunc file_write get_diff getversion largest_file libzfs_input_check mkbusy mkfile mkfiles mktree mmap_exec mmap_libaio mmap_seek mmap_sync mmapwrite nvlist_to_lua randfree_file randwritecomp readmmap read_dos_attributes renameat2 rename_dir rm_lnkcnt_zero_file send_doall threadsappend user_ns_exec write_dos_attributes xattrtest stride_dd zed_fd_spill-zedlet suid_write_to_file cp_files blake3_test edonr_test skein_test sha2_test ctime truncate_test ereports zfs_diff-socket dosmode_readonly_write idmap_util' diff --git a/tests/zfs-tests/tests/Makefile.am b/tests/zfs-tests/tests/Makefile.am index 158401e078aa..87b50f59ca7a 100644 --- a/tests/zfs-tests/tests/Makefile.am +++ b/tests/zfs-tests/tests/Makefile.am @@ -1,2073 +1,2074 @@ CLEANFILES = dist_noinst_DATA = include $(top_srcdir)/config/Substfiles.am datadir_zfs_tests_testsdir = $(datadir)/$(PACKAGE)/zfs-tests/tests nobase_dist_datadir_zfs_tests_tests_DATA = \ perf/nfs-sample.cfg \ perf/perf.shlib \ \ perf/fio/mkfiles.fio \ perf/fio/random_reads.fio \ perf/fio/random_readwrite.fio \ perf/fio/random_readwrite_fixed.fio \ perf/fio/random_writes.fio \ perf/fio/sequential_reads.fio \ perf/fio/sequential_readwrite.fio \ perf/fio/sequential_writes.fio nobase_dist_datadir_zfs_tests_tests_SCRIPTS = \ perf/regression/random_reads.ksh \ perf/regression/random_readwrite.ksh \ perf/regression/random_readwrite_fixed.ksh \ perf/regression/random_writes.ksh \ perf/regression/random_writes_zil.ksh \ perf/regression/sequential_reads_arc_cached_clone.ksh \ perf/regression/sequential_reads_arc_cached.ksh \ perf/regression/sequential_reads_dbuf_cached.ksh \ perf/regression/sequential_reads.ksh \ perf/regression/sequential_writes.ksh \ perf/regression/setup.ksh \ \ perf/scripts/prefetch_io.sh # These lists can be regenerated by running make regen-tests at the root, or, on a *clean* source: # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' ! -executable -name '*.in' | sort | sed 's/\.in$//;s/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' -executable -name '*.in' | sort | sed 's/\.in$//;s/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' ! -name '*.in' ! -name '*.c' | grep -Fe /simd -e /tmpfile | sort | sed 's/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' ! -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$!s/$/ \\/' # find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$!s/$/ \\/' # # simd and tmpfile are Linux-only and not installed elsewhere # # C programs are specced in ../Makefile.am above as part of the main Makefile find_common := find functional/ ! -type d ! -name .gitignore ! -name .dirstamp ! -name '*.Po' regen: @$(MAKE) -C $(top_builddir) clean @$(MAKE) clean $(SED) $(ac_inplace) '/^# -- >8 --/q' Makefile.am echo >> Makefile.am echo 'nobase_nodist_datadir_zfs_tests_tests_DATA = \' >> Makefile.am $(find_common) ! -executable -name '*.in' | sort | sed 's/\.in$$//;s/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo 'nobase_nodist_datadir_zfs_tests_tests_SCRIPTS = \' >> Makefile.am $(find_common) -executable -name '*.in' | sort | sed 's/\.in$$//;s/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo >> Makefile.am echo 'SUBSTFILES += $$(nobase_nodist_datadir_zfs_tests_tests_DATA) $$(nobase_nodist_datadir_zfs_tests_tests_SCRIPTS)' >> Makefile.am echo >> Makefile.am echo 'if BUILD_LINUX' >> Makefile.am echo 'nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \' >> Makefile.am $(find_common) ! -name '*.in' ! -name '*.c' | grep -Fe /simd -e /tmpfile | sort | sed 's/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo 'endif' >> Makefile.am echo >> Makefile.am echo 'nobase_dist_datadir_zfs_tests_tests_DATA += \' >> Makefile.am $(find_common) ! -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$$!s/$$/ \\/' >> Makefile.am echo >> Makefile.am echo 'nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \' >> Makefile.am $(find_common) -executable ! -name '*.in' ! -name '*.c' | grep -vFe /simd -e /tmpfile | sort | sed 's/^/\t/;$$!s/$$/ \\/' >> Makefile.am # -- >8 -- nobase_nodist_datadir_zfs_tests_tests_DATA = \ functional/pam/utilities.kshlib nobase_nodist_datadir_zfs_tests_tests_SCRIPTS = \ functional/pyzfs/pyzfs_unittest.ksh SUBSTFILES += $(nobase_nodist_datadir_zfs_tests_tests_DATA) $(nobase_nodist_datadir_zfs_tests_tests_SCRIPTS) if BUILD_LINUX nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \ functional/simd/simd_supported.ksh \ functional/tmpfile/cleanup.ksh \ functional/tmpfile/setup.ksh endif nobase_dist_datadir_zfs_tests_tests_DATA += \ functional/acl/acl.cfg \ functional/acl/acl_common.kshlib \ functional/alloc_class/alloc_class.cfg \ functional/alloc_class/alloc_class.kshlib \ functional/atime/atime.cfg \ functional/atime/atime_common.kshlib \ functional/block_cloning/block_cloning.kshlib \ functional/cache/cache.cfg \ functional/cache/cache.kshlib \ functional/cachefile/cachefile.cfg \ functional/cachefile/cachefile.kshlib \ functional/casenorm/casenorm.cfg \ functional/casenorm/casenorm.kshlib \ functional/channel_program/channel_common.kshlib \ functional/channel_program/lua_core/tst.args_to_lua.out \ functional/channel_program/lua_core/tst.args_to_lua.zcp \ functional/channel_program/lua_core/tst.divide_by_zero.err \ functional/channel_program/lua_core/tst.divide_by_zero.zcp \ functional/channel_program/lua_core/tst.exists.zcp \ functional/channel_program/lua_core/tst.large_prog.out \ functional/channel_program/lua_core/tst.large_prog.zcp \ functional/channel_program/lua_core/tst.lib_base.lua \ functional/channel_program/lua_core/tst.lib_coroutine.lua \ functional/channel_program/lua_core/tst.lib_strings.lua \ functional/channel_program/lua_core/tst.lib_table.lua \ functional/channel_program/lua_core/tst.nested_neg.zcp \ functional/channel_program/lua_core/tst.nested_pos.zcp \ functional/channel_program/lua_core/tst.recursive.zcp \ functional/channel_program/lua_core/tst.return_large.zcp \ functional/channel_program/lua_core/tst.return_recursive_table.zcp \ functional/channel_program/lua_core/tst.stack_gsub.err \ functional/channel_program/lua_core/tst.stack_gsub.zcp \ functional/channel_program/lua_core/tst.timeout.zcp \ functional/channel_program/synctask_core/tst.bookmark.copy.zcp \ functional/channel_program/synctask_core/tst.bookmark.create.zcp \ functional/channel_program/synctask_core/tst.get_index_props.out \ functional/channel_program/synctask_core/tst.get_index_props.zcp \ functional/channel_program/synctask_core/tst.get_number_props.out \ functional/channel_program/synctask_core/tst.get_number_props.zcp \ functional/channel_program/synctask_core/tst.get_string_props.out \ functional/channel_program/synctask_core/tst.get_string_props.zcp \ functional/channel_program/synctask_core/tst.promote_conflict.zcp \ functional/channel_program/synctask_core/tst.set_props.zcp \ functional/channel_program/synctask_core/tst.snapshot_destroy.zcp \ functional/channel_program/synctask_core/tst.snapshot_neg.zcp \ functional/channel_program/synctask_core/tst.snapshot_recursive.zcp \ functional/channel_program/synctask_core/tst.snapshot_rename.zcp \ functional/channel_program/synctask_core/tst.snapshot_simple.zcp \ functional/checksum/default.cfg \ functional/clean_mirror/clean_mirror_common.kshlib \ functional/clean_mirror/default.cfg \ functional/cli_root/cli_common.kshlib \ functional/cli_root/zfs_copies/zfs_copies.cfg \ functional/cli_root/zfs_copies/zfs_copies.kshlib \ functional/cli_root/zfs_create/properties.kshlib \ functional/cli_root/zfs_create/zfs_create.cfg \ functional/cli_root/zfs_create/zfs_create_common.kshlib \ functional/cli_root/zfs_destroy/zfs_destroy.cfg \ functional/cli_root/zfs_destroy/zfs_destroy_common.kshlib \ functional/cli_root/zfs_get/zfs_get_common.kshlib \ functional/cli_root/zfs_get/zfs_get_list_d.kshlib \ functional/cli_root/zfs_jail/jail.conf \ functional/cli_root/zfs_load-key/HEXKEY \ functional/cli_root/zfs_load-key/PASSPHRASE \ functional/cli_root/zfs_load-key/RAWKEY \ functional/cli_root/zfs_load-key/zfs_load-key.cfg \ functional/cli_root/zfs_load-key/zfs_load-key_common.kshlib \ functional/cli_root/zfs_mount/zfs_mount.cfg \ functional/cli_root/zfs_mount/zfs_mount.kshlib \ functional/cli_root/zfs_promote/zfs_promote.cfg \ functional/cli_root/zfs_receive/zstd_test_data.txt \ functional/cli_root/zfs_rename/zfs_rename.cfg \ functional/cli_root/zfs_rename/zfs_rename.kshlib \ functional/cli_root/zfs_rollback/zfs_rollback.cfg \ functional/cli_root/zfs_rollback/zfs_rollback_common.kshlib \ functional/cli_root/zfs_send/zfs_send.cfg \ functional/cli_root/zfs_set/zfs_set_common.kshlib \ functional/cli_root/zfs_share/zfs_share.cfg \ functional/cli_root/zfs_snapshot/zfs_snapshot.cfg \ functional/cli_root/zfs_unmount/zfs_unmount.cfg \ functional/cli_root/zfs_unmount/zfs_unmount.kshlib \ functional/cli_root/zfs_upgrade/zfs_upgrade.kshlib \ functional/cli_root/zfs_wait/zfs_wait.kshlib \ functional/cli_root/zpool_add/zpool_add.cfg \ functional/cli_root/zpool_add/zpool_add.kshlib \ functional/cli_root/zpool_clear/zpool_clear.cfg \ functional/cli_root/zpool_create/draidcfg.gz \ functional/cli_root/zpool_create/zpool_create.cfg \ functional/cli_root/zpool_create/zpool_create.shlib \ functional/cli_root/zpool_destroy/zpool_destroy.cfg \ functional/cli_root/zpool_events/zpool_events.cfg \ functional/cli_root/zpool_events/zpool_events.kshlib \ functional/cli_root/zpool_expand/zpool_expand.cfg \ functional/cli_root/zpool_export/zpool_export.cfg \ functional/cli_root/zpool_export/zpool_export.kshlib \ functional/cli_root/zpool_get/vdev_get.cfg \ functional/cli_root/zpool_get/zpool_get.cfg \ functional/cli_root/zpool_get/zpool_get_parsable.cfg \ functional/cli_root/zpool_import/blockfiles/cryptv0.dat.bz2 \ functional/cli_root/zpool_import/blockfiles/missing_ivset.dat.bz2 \ functional/cli_root/zpool_import/blockfiles/unclean_export.dat.bz2 \ functional/cli_root/zpool_import/zpool_import.cfg \ functional/cli_root/zpool_import/zpool_import.kshlib \ functional/cli_root/zpool_initialize/zpool_initialize.kshlib \ functional/cli_root/zpool_labelclear/labelclear.cfg \ functional/cli_root/zpool_remove/zpool_remove.cfg \ functional/cli_root/zpool_reopen/zpool_reopen.cfg \ functional/cli_root/zpool_reopen/zpool_reopen.shlib \ functional/cli_root/zpool_resilver/zpool_resilver.cfg \ functional/cli_root/zpool_scrub/zpool_scrub.cfg \ functional/cli_root/zpool_split/zpool_split.cfg \ functional/cli_root/zpool_trim/zpool_trim.kshlib \ functional/cli_root/zpool_upgrade/blockfiles/zfs-broken-mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-broken-mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v10.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v11.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v12.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v13.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v14.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v15.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1mirror3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1raidz1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1raidz2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1raidz3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1stripe1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1stripe2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v1stripe3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2mirror3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2raidz1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2raidz2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2raidz3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2stripe1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2stripe2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v2stripe3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3hotspare1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3hotspare2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3hotspare3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3mirror1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3mirror2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3mirror3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz21.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz22.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz23.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3raidz3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3stripe1.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3stripe2.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v3stripe3.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v4.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v5.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v6.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v7.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v8.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v999.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-v9.dat.bz2 \ functional/cli_root/zpool_upgrade/blockfiles/zfs-pool-vBROKEN.dat.bz2 \ functional/cli_root/zpool_upgrade/zpool_upgrade.cfg \ functional/cli_root/zpool_upgrade/zpool_upgrade.kshlib \ functional/cli_root/zpool_wait/zpool_wait.kshlib \ functional/cli_root/zhack/library.kshlib \ functional/cli_user/misc/misc.cfg \ functional/cli_user/zfs_list/zfs_list.cfg \ functional/cli_user/zfs_list/zfs_list.kshlib \ functional/compression/compress.cfg \ functional/compression/testpool_zstd.tar.gz \ functional/deadman/deadman.cfg \ functional/delegate/delegate.cfg \ functional/delegate/delegate_common.kshlib \ functional/devices/devices.cfg \ functional/devices/devices_common.kshlib \ functional/events/events.cfg \ functional/events/events_common.kshlib \ functional/fault/fault.cfg \ functional/grow/grow.cfg \ functional/history/history.cfg \ functional/history/history_common.kshlib \ functional/history/i386.migratedpool.DAT.Z \ functional/history/i386.orig_history.txt \ functional/history/sparc.migratedpool.DAT.Z \ functional/history/sparc.orig_history.txt \ functional/history/zfs-pool-v4.dat.Z \ functional/inheritance/config001.cfg \ functional/inheritance/config002.cfg \ functional/inheritance/config003.cfg \ functional/inheritance/config004.cfg \ functional/inheritance/config005.cfg \ functional/inheritance/config006.cfg \ functional/inheritance/config007.cfg \ functional/inheritance/config008.cfg \ functional/inheritance/config009.cfg \ functional/inheritance/config010.cfg \ functional/inheritance/config011.cfg \ functional/inheritance/config012.cfg \ functional/inheritance/config013.cfg \ functional/inheritance/config014.cfg \ functional/inheritance/config015.cfg \ functional/inheritance/config016.cfg \ functional/inheritance/config017.cfg \ functional/inheritance/config018.cfg \ functional/inheritance/config019.cfg \ functional/inheritance/config020.cfg \ functional/inheritance/config021.cfg \ functional/inheritance/config022.cfg \ functional/inheritance/config023.cfg \ functional/inheritance/config024.cfg \ functional/inheritance/inherit.kshlib \ functional/inheritance/README.config \ functional/inheritance/README.state \ functional/inheritance/state001.cfg \ functional/inheritance/state002.cfg \ functional/inheritance/state003.cfg \ functional/inheritance/state004.cfg \ functional/inheritance/state005.cfg \ functional/inheritance/state006.cfg \ functional/inheritance/state007.cfg \ functional/inheritance/state008.cfg \ functional/inheritance/state009.cfg \ functional/inheritance/state010.cfg \ functional/inheritance/state011.cfg \ functional/inheritance/state012.cfg \ functional/inheritance/state013.cfg \ functional/inheritance/state014.cfg \ functional/inheritance/state015.cfg \ functional/inheritance/state016.cfg \ functional/inheritance/state017.cfg \ functional/inheritance/state018.cfg \ functional/inheritance/state019.cfg \ functional/inheritance/state020.cfg \ functional/inheritance/state021.cfg \ functional/inheritance/state022.cfg \ functional/inheritance/state023.cfg \ functional/inheritance/state024.cfg \ functional/inuse/inuse.cfg \ functional/io/io.cfg \ functional/l2arc/l2arc.cfg \ functional/largest_pool/largest_pool.cfg \ functional/migration/migration.cfg \ functional/migration/migration.kshlib \ functional/mmap/mmap.cfg \ functional/mmp/mmp.cfg \ functional/mmp/mmp.kshlib \ functional/mv_files/mv_files.cfg \ functional/mv_files/mv_files_common.kshlib \ functional/nopwrite/nopwrite.shlib \ functional/no_space/enospc.cfg \ functional/online_offline/online_offline.cfg \ functional/pool_checkpoint/pool_checkpoint.kshlib \ functional/projectquota/projectquota.cfg \ functional/projectquota/projectquota_common.kshlib \ functional/quota/quota.cfg \ functional/quota/quota.kshlib \ functional/redacted_send/redacted.cfg \ functional/redacted_send/redacted.kshlib \ functional/redundancy/redundancy.cfg \ functional/redundancy/redundancy.kshlib \ functional/refreserv/refreserv.cfg \ functional/removal/removal.kshlib \ functional/replacement/replacement.cfg \ functional/reservation/reservation.cfg \ functional/reservation/reservation.shlib \ functional/rsend/dedup_encrypted_zvol.bz2 \ functional/rsend/dedup_encrypted_zvol.zsend.bz2 \ functional/rsend/dedup.zsend.bz2 \ functional/rsend/fs.tar.gz \ functional/rsend/rsend.cfg \ functional/rsend/rsend.kshlib \ functional/scrub_mirror/default.cfg \ functional/scrub_mirror/scrub_mirror_common.kshlib \ functional/slog/slog.cfg \ functional/slog/slog.kshlib \ functional/snapshot/snapshot.cfg \ functional/snapused/snapused.kshlib \ functional/sparse/sparse.cfg \ functional/trim/trim.cfg \ functional/trim/trim.kshlib \ functional/truncate/truncate.cfg \ functional/upgrade/upgrade_common.kshlib \ functional/user_namespace/user_namespace.cfg \ functional/user_namespace/user_namespace_common.kshlib \ functional/userquota/13709_reproducer.bz2 \ functional/userquota/userquota.cfg \ functional/userquota/userquota_common.kshlib \ functional/vdev_zaps/vdev_zaps.kshlib \ functional/xattr/xattr.cfg \ functional/xattr/xattr_common.kshlib \ functional/zvol/zvol.cfg \ functional/zvol/zvol_cli/zvol_cli.cfg \ functional/zvol/zvol_common.shlib \ functional/zvol/zvol_ENOSPC/zvol_ENOSPC.cfg \ functional/zvol/zvol_misc/zvol_misc_common.kshlib \ functional/zvol/zvol_swap/zvol_swap.cfg \ functional/idmap_mount/idmap_mount.cfg \ functional/idmap_mount/idmap_mount_common.kshlib nobase_dist_datadir_zfs_tests_tests_SCRIPTS += \ functional/acl/off/cleanup.ksh \ functional/acl/off/dosmode.ksh \ functional/acl/off/posixmode.ksh \ functional/acl/off/setup.ksh \ functional/acl/posix/cleanup.ksh \ functional/acl/posix/posix_001_pos.ksh \ functional/acl/posix/posix_002_pos.ksh \ functional/acl/posix/posix_003_pos.ksh \ functional/acl/posix/posix_004_pos.ksh \ functional/acl/posix-sa/cleanup.ksh \ functional/acl/posix-sa/posix_001_pos.ksh \ functional/acl/posix-sa/posix_002_pos.ksh \ functional/acl/posix-sa/posix_003_pos.ksh \ functional/acl/posix-sa/posix_004_pos.ksh \ functional/acl/posix-sa/setup.ksh \ functional/acl/posix/setup.ksh \ functional/alloc_class/alloc_class_001_pos.ksh \ functional/alloc_class/alloc_class_002_neg.ksh \ functional/alloc_class/alloc_class_003_pos.ksh \ functional/alloc_class/alloc_class_004_pos.ksh \ functional/alloc_class/alloc_class_005_pos.ksh \ functional/alloc_class/alloc_class_006_pos.ksh \ functional/alloc_class/alloc_class_007_pos.ksh \ functional/alloc_class/alloc_class_008_pos.ksh \ functional/alloc_class/alloc_class_009_pos.ksh \ functional/alloc_class/alloc_class_010_pos.ksh \ functional/alloc_class/alloc_class_011_neg.ksh \ functional/alloc_class/alloc_class_012_pos.ksh \ functional/alloc_class/alloc_class_013_pos.ksh \ functional/alloc_class/alloc_class_014_neg.ksh \ functional/alloc_class/alloc_class_015_pos.ksh \ functional/alloc_class/cleanup.ksh \ functional/alloc_class/setup.ksh \ functional/append/file_append.ksh \ functional/append/threadsappend_001_pos.ksh \ functional/append/cleanup.ksh \ functional/append/setup.ksh \ functional/arc/arcstats_runtime_tuning.ksh \ functional/arc/cleanup.ksh \ functional/arc/dbufstats_001_pos.ksh \ functional/arc/dbufstats_002_pos.ksh \ functional/arc/dbufstats_003_pos.ksh \ functional/arc/setup.ksh \ functional/atime/atime_001_pos.ksh \ functional/atime/atime_002_neg.ksh \ functional/atime/atime_003_pos.ksh \ functional/atime/cleanup.ksh \ functional/atime/root_atime_off.ksh \ functional/atime/root_atime_on.ksh \ functional/atime/root_relatime_on.ksh \ functional/atime/setup.ksh \ functional/block_cloning/cleanup.ksh \ functional/block_cloning/setup.ksh \ functional/block_cloning/block_cloning_copyfilerange_cross_dataset.ksh \ functional/block_cloning/block_cloning_copyfilerange_fallback.ksh \ functional/block_cloning/block_cloning_copyfilerange_fallback_same_txg.ksh \ functional/block_cloning/block_cloning_copyfilerange.ksh \ functional/block_cloning/block_cloning_copyfilerange_partial.ksh \ functional/block_cloning/block_cloning_disabled_copyfilerange.ksh \ functional/block_cloning/block_cloning_disabled_ficlone.ksh \ functional/block_cloning/block_cloning_disabled_ficlonerange.ksh \ functional/block_cloning/block_cloning_ficlone.ksh \ functional/block_cloning/block_cloning_ficlonerange.ksh \ functional/block_cloning/block_cloning_ficlonerange_partial.ksh \ functional/bootfs/bootfs_001_pos.ksh \ functional/bootfs/bootfs_002_neg.ksh \ functional/bootfs/bootfs_003_pos.ksh \ functional/bootfs/bootfs_004_neg.ksh \ functional/bootfs/bootfs_005_neg.ksh \ functional/bootfs/bootfs_006_pos.ksh \ functional/bootfs/bootfs_007_pos.ksh \ functional/bootfs/bootfs_008_pos.ksh \ functional/bootfs/cleanup.ksh \ functional/bootfs/setup.ksh \ functional/btree/btree_negative.ksh \ functional/btree/btree_positive.ksh \ functional/cache/cache_001_pos.ksh \ functional/cache/cache_002_pos.ksh \ functional/cache/cache_003_pos.ksh \ functional/cache/cache_004_neg.ksh \ functional/cache/cache_005_neg.ksh \ functional/cache/cache_006_pos.ksh \ functional/cache/cache_007_neg.ksh \ functional/cache/cache_008_neg.ksh \ functional/cache/cache_009_pos.ksh \ functional/cache/cache_010_pos.ksh \ functional/cache/cache_011_pos.ksh \ functional/cache/cache_012_pos.ksh \ functional/cache/cleanup.ksh \ functional/cachefile/cachefile_001_pos.ksh \ functional/cachefile/cachefile_002_pos.ksh \ functional/cachefile/cachefile_003_pos.ksh \ functional/cachefile/cachefile_004_pos.ksh \ functional/cachefile/cleanup.ksh \ functional/cachefile/setup.ksh \ functional/cache/setup.ksh \ functional/casenorm/case_all_values.ksh \ functional/casenorm/cleanup.ksh \ functional/casenorm/insensitive_formd_delete.ksh \ functional/casenorm/insensitive_formd_lookup.ksh \ functional/casenorm/insensitive_none_delete.ksh \ functional/casenorm/insensitive_none_lookup.ksh \ functional/casenorm/mixed_create_failure.ksh \ functional/casenorm/mixed_formd_delete.ksh \ functional/casenorm/mixed_formd_lookup_ci.ksh \ functional/casenorm/mixed_formd_lookup.ksh \ functional/casenorm/mixed_none_delete.ksh \ functional/casenorm/mixed_none_lookup_ci.ksh \ functional/casenorm/mixed_none_lookup.ksh \ functional/casenorm/norm_all_values.ksh \ functional/casenorm/sensitive_formd_delete.ksh \ functional/casenorm/sensitive_formd_lookup.ksh \ functional/casenorm/sensitive_none_delete.ksh \ functional/casenorm/sensitive_none_lookup.ksh \ functional/casenorm/setup.ksh \ functional/channel_program/lua_core/cleanup.ksh \ functional/channel_program/lua_core/setup.ksh \ functional/channel_program/lua_core/tst.args_to_lua.ksh \ functional/channel_program/lua_core/tst.divide_by_zero.ksh \ functional/channel_program/lua_core/tst.exists.ksh \ functional/channel_program/lua_core/tst.integer_illegal.ksh \ functional/channel_program/lua_core/tst.integer_overflow.ksh \ functional/channel_program/lua_core/tst.language_functions_neg.ksh \ functional/channel_program/lua_core/tst.language_functions_pos.ksh \ functional/channel_program/lua_core/tst.large_prog.ksh \ functional/channel_program/lua_core/tst.libraries.ksh \ functional/channel_program/lua_core/tst.memory_limit.ksh \ functional/channel_program/lua_core/tst.nested_neg.ksh \ functional/channel_program/lua_core/tst.nested_pos.ksh \ functional/channel_program/lua_core/tst.nvlist_to_lua.ksh \ functional/channel_program/lua_core/tst.recursive_neg.ksh \ functional/channel_program/lua_core/tst.recursive_pos.ksh \ functional/channel_program/lua_core/tst.return_large.ksh \ functional/channel_program/lua_core/tst.return_nvlist_neg.ksh \ functional/channel_program/lua_core/tst.return_nvlist_pos.ksh \ functional/channel_program/lua_core/tst.return_recursive_table.ksh \ functional/channel_program/lua_core/tst.stack_gsub.ksh \ functional/channel_program/lua_core/tst.timeout.ksh \ functional/channel_program/synctask_core/cleanup.ksh \ functional/channel_program/synctask_core/setup.ksh \ functional/channel_program/synctask_core/tst.bookmark.copy.ksh \ functional/channel_program/synctask_core/tst.bookmark.create.ksh \ functional/channel_program/synctask_core/tst.destroy_fs.ksh \ functional/channel_program/synctask_core/tst.destroy_snap.ksh \ functional/channel_program/synctask_core/tst.get_count_and_limit.ksh \ functional/channel_program/synctask_core/tst.get_index_props.ksh \ functional/channel_program/synctask_core/tst.get_mountpoint.ksh \ functional/channel_program/synctask_core/tst.get_neg.ksh \ functional/channel_program/synctask_core/tst.get_number_props.ksh \ functional/channel_program/synctask_core/tst.get_string_props.ksh \ functional/channel_program/synctask_core/tst.get_type.ksh \ functional/channel_program/synctask_core/tst.get_userquota.ksh \ functional/channel_program/synctask_core/tst.get_written.ksh \ functional/channel_program/synctask_core/tst.inherit.ksh \ functional/channel_program/synctask_core/tst.list_bookmarks.ksh \ functional/channel_program/synctask_core/tst.list_children.ksh \ functional/channel_program/synctask_core/tst.list_clones.ksh \ functional/channel_program/synctask_core/tst.list_holds.ksh \ functional/channel_program/synctask_core/tst.list_snapshots.ksh \ functional/channel_program/synctask_core/tst.list_system_props.ksh \ functional/channel_program/synctask_core/tst.list_user_props.ksh \ functional/channel_program/synctask_core/tst.parse_args_neg.ksh \ functional/channel_program/synctask_core/tst.promote_conflict.ksh \ functional/channel_program/synctask_core/tst.promote_multiple.ksh \ functional/channel_program/synctask_core/tst.promote_simple.ksh \ functional/channel_program/synctask_core/tst.rollback_mult.ksh \ functional/channel_program/synctask_core/tst.rollback_one.ksh \ functional/channel_program/synctask_core/tst.set_props.ksh \ functional/channel_program/synctask_core/tst.snapshot_destroy.ksh \ functional/channel_program/synctask_core/tst.snapshot_neg.ksh \ functional/channel_program/synctask_core/tst.snapshot_recursive.ksh \ functional/channel_program/synctask_core/tst.snapshot_rename.ksh \ functional/channel_program/synctask_core/tst.snapshot_simple.ksh \ functional/channel_program/synctask_core/tst.terminate_by_signal.ksh \ functional/chattr/chattr_001_pos.ksh \ functional/chattr/chattr_002_neg.ksh \ functional/chattr/cleanup.ksh \ functional/chattr/setup.ksh \ functional/checksum/cleanup.ksh \ functional/checksum/filetest_001_pos.ksh \ functional/checksum/filetest_002_pos.ksh \ functional/checksum/run_blake3_test.ksh \ functional/checksum/run_edonr_test.ksh \ functional/checksum/run_sha2_test.ksh \ functional/checksum/run_skein_test.ksh \ functional/checksum/setup.ksh \ functional/clean_mirror/clean_mirror_001_pos.ksh \ functional/clean_mirror/clean_mirror_002_pos.ksh \ functional/clean_mirror/clean_mirror_003_pos.ksh \ functional/clean_mirror/clean_mirror_004_pos.ksh \ functional/clean_mirror/cleanup.ksh \ functional/clean_mirror/setup.ksh \ functional/cli_root/zdb/zdb_002_pos.ksh \ functional/cli_root/zdb/zdb_003_pos.ksh \ functional/cli_root/zdb/zdb_004_pos.ksh \ functional/cli_root/zdb/zdb_005_pos.ksh \ functional/cli_root/zdb/zdb_006_pos.ksh \ functional/cli_root/zdb/zdb_args_neg.ksh \ functional/cli_root/zdb/zdb_args_pos.ksh \ functional/cli_root/zdb/zdb_backup.ksh \ functional/cli_root/zdb/zdb_block_size_histogram.ksh \ functional/cli_root/zdb/zdb_checksum.ksh \ functional/cli_root/zdb/zdb_decompress.ksh \ functional/cli_root/zdb/zdb_decompress_zstd.ksh \ functional/cli_root/zdb/zdb_display_block.ksh \ functional/cli_root/zdb/zdb_encrypted.ksh \ functional/cli_root/zdb/zdb_label_checksum.ksh \ functional/cli_root/zdb/zdb_object_range_neg.ksh \ functional/cli_root/zdb/zdb_object_range_pos.ksh \ functional/cli_root/zdb/zdb_objset_id.ksh \ functional/cli_root/zdb/zdb_recover_2.ksh \ functional/cli_root/zdb/zdb_recover.ksh \ functional/cli_root/zfs_bookmark/cleanup.ksh \ functional/cli_root/zfs_bookmark/setup.ksh \ functional/cli_root/zfs_bookmark/zfs_bookmark_cliargs.ksh \ functional/cli_root/zfs_change-key/cleanup.ksh \ functional/cli_root/zfs_change-key/setup.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_child.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_clones.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_format.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_inherit.ksh \ functional/cli_root/zfs_change-key/zfs_change-key.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_load.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_location.ksh \ functional/cli_root/zfs_change-key/zfs_change-key_pbkdf2iters.ksh \ functional/cli_root/zfs/cleanup.ksh \ functional/cli_root/zfs_clone/cleanup.ksh \ functional/cli_root/zfs_clone/setup.ksh \ functional/cli_root/zfs_clone/zfs_clone_001_neg.ksh \ functional/cli_root/zfs_clone/zfs_clone_002_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_003_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_004_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_005_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_006_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_007_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_008_neg.ksh \ functional/cli_root/zfs_clone/zfs_clone_009_neg.ksh \ functional/cli_root/zfs_clone/zfs_clone_010_pos.ksh \ functional/cli_root/zfs_clone/zfs_clone_deeply_nested.ksh \ functional/cli_root/zfs_clone/zfs_clone_encrypted.ksh \ functional/cli_root/zfs_clone/zfs_clone_rm_nested.ksh \ functional/cli_root/zfs_copies/cleanup.ksh \ functional/cli_root/zfs_copies/setup.ksh \ functional/cli_root/zfs_copies/zfs_copies_001_pos.ksh \ functional/cli_root/zfs_copies/zfs_copies_002_pos.ksh \ functional/cli_root/zfs_copies/zfs_copies_003_pos.ksh \ functional/cli_root/zfs_copies/zfs_copies_004_neg.ksh \ functional/cli_root/zfs_copies/zfs_copies_005_neg.ksh \ functional/cli_root/zfs_copies/zfs_copies_006_pos.ksh \ functional/cli_root/zfs_create/cleanup.ksh \ functional/cli_root/zfs_create/setup.ksh \ functional/cli_root/zfs_create/zfs_create_001_pos.ksh \ functional/cli_root/zfs_create/zfs_create_002_pos.ksh \ functional/cli_root/zfs_create/zfs_create_003_pos.ksh \ functional/cli_root/zfs_create/zfs_create_004_pos.ksh \ functional/cli_root/zfs_create/zfs_create_005_pos.ksh \ functional/cli_root/zfs_create/zfs_create_006_pos.ksh \ functional/cli_root/zfs_create/zfs_create_007_pos.ksh \ functional/cli_root/zfs_create/zfs_create_008_neg.ksh \ functional/cli_root/zfs_create/zfs_create_009_neg.ksh \ functional/cli_root/zfs_create/zfs_create_010_neg.ksh \ functional/cli_root/zfs_create/zfs_create_011_pos.ksh \ functional/cli_root/zfs_create/zfs_create_012_pos.ksh \ functional/cli_root/zfs_create/zfs_create_013_pos.ksh \ functional/cli_root/zfs_create/zfs_create_014_pos.ksh \ functional/cli_root/zfs_create/zfs_create_crypt_combos.ksh \ functional/cli_root/zfs_create/zfs_create_dryrun.ksh \ functional/cli_root/zfs_create/zfs_create_encrypted.ksh \ functional/cli_root/zfs_create/zfs_create_nomount.ksh \ functional/cli_root/zfs_create/zfs_create_verbose.ksh \ functional/cli_root/zfs_destroy/cleanup.ksh \ functional/cli_root/zfs_destroy/setup.ksh \ functional/cli_root/zfs_destroy/zfs_clone_livelist_condense_and_disable.ksh \ functional/cli_root/zfs_destroy/zfs_clone_livelist_condense_races.ksh \ functional/cli_root/zfs_destroy/zfs_clone_livelist_dedup.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_001_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_002_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_003_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_004_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_005_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_006_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_007_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_008_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_009_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_010_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_011_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_012_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_013_neg.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_014_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_015_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_016_pos.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_clone_livelist.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_dev_removal_condense.ksh \ functional/cli_root/zfs_destroy/zfs_destroy_dev_removal.ksh \ functional/cli_root/zfs_diff/cleanup.ksh \ functional/cli_root/zfs_diff/setup.ksh \ functional/cli_root/zfs_diff/zfs_diff_changes.ksh \ functional/cli_root/zfs_diff/zfs_diff_cliargs.ksh \ functional/cli_root/zfs_diff/zfs_diff_encrypted.ksh \ functional/cli_root/zfs_diff/zfs_diff_mangle.ksh \ functional/cli_root/zfs_diff/zfs_diff_timestamp.ksh \ functional/cli_root/zfs_diff/zfs_diff_types.ksh \ functional/cli_root/zfs_get/cleanup.ksh \ functional/cli_root/zfs_get/setup.ksh \ functional/cli_root/zfs_get/zfs_get_001_pos.ksh \ functional/cli_root/zfs_get/zfs_get_002_pos.ksh \ functional/cli_root/zfs_get/zfs_get_003_pos.ksh \ functional/cli_root/zfs_get/zfs_get_004_pos.ksh \ functional/cli_root/zfs_get/zfs_get_005_neg.ksh \ functional/cli_root/zfs_get/zfs_get_006_neg.ksh \ functional/cli_root/zfs_get/zfs_get_007_neg.ksh \ functional/cli_root/zfs_get/zfs_get_008_pos.ksh \ functional/cli_root/zfs_get/zfs_get_009_pos.ksh \ functional/cli_root/zfs_get/zfs_get_010_neg.ksh \ functional/cli_root/zfs_ids_to_path/cleanup.ksh \ functional/cli_root/zfs_ids_to_path/setup.ksh \ functional/cli_root/zfs_ids_to_path/zfs_ids_to_path_001_pos.ksh \ functional/cli_root/zfs_inherit/cleanup.ksh \ functional/cli_root/zfs_inherit/setup.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_001_neg.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_002_neg.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_003_pos.ksh \ functional/cli_root/zfs_inherit/zfs_inherit_mountpoint.ksh \ functional/cli_root/zfs_jail/cleanup.ksh \ functional/cli_root/zfs_jail/setup.ksh \ functional/cli_root/zfs_jail/zfs_jail_001_pos.ksh \ functional/cli_root/zfs_load-key/cleanup.ksh \ functional/cli_root/zfs_load-key/setup.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_all.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_file.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_https.ksh \ functional/cli_root/zfs_load-key/zfs_load-key.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_location.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_noop.ksh \ functional/cli_root/zfs_load-key/zfs_load-key_recursive.ksh \ functional/cli_root/zfs_mount/cleanup.ksh \ functional/cli_root/zfs_mount/setup.ksh \ functional/cli_root/zfs_mount/zfs_mount_001_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_002_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_003_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_004_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_005_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_006_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_007_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_008_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_009_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_010_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_011_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_012_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_013_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_014_neg.ksh \ functional/cli_root/zfs_mount/zfs_mount_all_001_pos.ksh \ functional/cli_root/zfs_mount/zfs_mount_all_fail.ksh \ functional/cli_root/zfs_mount/zfs_mount_all_mountpoints.ksh \ functional/cli_root/zfs_mount/zfs_mount_encrypted.ksh \ functional/cli_root/zfs_mount/zfs_mount_remount.ksh \ functional/cli_root/zfs_mount/zfs_mount_test_race.ksh \ functional/cli_root/zfs_mount/zfs_multi_mount.ksh \ functional/cli_root/zfs_program/cleanup.ksh \ functional/cli_root/zfs_program/setup.ksh \ functional/cli_root/zfs_program/zfs_program_json.ksh \ functional/cli_root/zfs_promote/cleanup.ksh \ functional/cli_root/zfs_promote/setup.ksh \ functional/cli_root/zfs_promote/zfs_promote_001_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_002_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_003_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_004_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_005_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_006_neg.ksh \ functional/cli_root/zfs_promote/zfs_promote_007_neg.ksh \ functional/cli_root/zfs_promote/zfs_promote_008_pos.ksh \ functional/cli_root/zfs_promote/zfs_promote_encryptionroot.ksh \ functional/cli_root/zfs_property/cleanup.ksh \ functional/cli_root/zfs_property/setup.ksh \ functional/cli_root/zfs_property/zfs_written_property_001_pos.ksh \ functional/cli_root/zfs_receive/cleanup.ksh \ functional/cli_root/zfs_receive/receive-o-x_props_aliases.ksh \ functional/cli_root/zfs_receive/receive-o-x_props_override.ksh \ functional/cli_root/zfs_receive/setup.ksh \ functional/cli_root/zfs_receive/zfs_receive_001_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_002_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_003_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_004_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_005_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_006_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_007_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_008_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_009_neg.ksh \ functional/cli_root/zfs_receive/zfs_receive_010_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_011_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_012_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_014_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_015_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_016_pos.ksh \ functional/cli_root/zfs_receive/zfs_receive_-e.ksh \ functional/cli_root/zfs_receive/zfs_receive_from_encrypted.ksh \ functional/cli_root/zfs_receive/zfs_receive_from_zstd.ksh \ functional/cli_root/zfs_receive/zfs_receive_new_props.ksh \ functional/cli_root/zfs_receive/zfs_receive_raw_-d.ksh \ functional/cli_root/zfs_receive/zfs_receive_raw_incremental.ksh \ functional/cli_root/zfs_receive/zfs_receive_raw.ksh \ functional/cli_root/zfs_receive/zfs_receive_to_encrypted.ksh \ functional/cli_root/zfs_receive/zfs_receive_-wR-encrypted-mix.ksh \ functional/cli_root/zfs_receive/zfs_receive_corrective.ksh \ functional/cli_root/zfs_receive/zfs_receive_compressed_corrective.ksh \ functional/cli_root/zfs_receive/zfs_receive_large_block_corrective.ksh \ functional/cli_root/zfs_rename/cleanup.ksh \ functional/cli_root/zfs_rename/setup.ksh \ functional/cli_root/zfs_rename/zfs_rename_001_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_002_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_003_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_004_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_005_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_006_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_007_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_008_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_009_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_010_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_011_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_012_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_013_pos.ksh \ functional/cli_root/zfs_rename/zfs_rename_014_neg.ksh \ functional/cli_root/zfs_rename/zfs_rename_encrypted_child.ksh \ functional/cli_root/zfs_rename/zfs_rename_mountpoint.ksh \ functional/cli_root/zfs_rename/zfs_rename_nounmount.ksh \ functional/cli_root/zfs_rename/zfs_rename_to_encrypted.ksh \ functional/cli_root/zfs_reservation/cleanup.ksh \ functional/cli_root/zfs_reservation/setup.ksh \ functional/cli_root/zfs_reservation/zfs_reservation_001_pos.ksh \ functional/cli_root/zfs_reservation/zfs_reservation_002_pos.ksh \ functional/cli_root/zfs_rollback/cleanup.ksh \ functional/cli_root/zfs_rollback/setup.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_001_pos.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_002_pos.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_003_neg.ksh \ functional/cli_root/zfs_rollback/zfs_rollback_004_neg.ksh \ functional/cli_root/zfs_send/cleanup.ksh \ functional/cli_root/zfs_send/setup.ksh \ functional/cli_root/zfs_send/zfs_send_001_pos.ksh \ functional/cli_root/zfs_send/zfs_send_002_pos.ksh \ functional/cli_root/zfs_send/zfs_send_003_pos.ksh \ functional/cli_root/zfs_send/zfs_send_004_neg.ksh \ functional/cli_root/zfs_send/zfs_send_005_pos.ksh \ functional/cli_root/zfs_send/zfs_send_006_pos.ksh \ functional/cli_root/zfs_send/zfs_send_007_pos.ksh \ functional/cli_root/zfs_send/zfs_send-b.ksh \ functional/cli_root/zfs_send/zfs_send_encrypted.ksh \ functional/cli_root/zfs_send/zfs_send_encrypted_unloaded.ksh \ functional/cli_root/zfs_send/zfs_send_raw.ksh \ functional/cli_root/zfs_send/zfs_send_skip_missing.ksh \ functional/cli_root/zfs_send/zfs_send_sparse.ksh \ functional/cli_root/zfs_set/cache_001_pos.ksh \ functional/cli_root/zfs_set/cache_002_neg.ksh \ functional/cli_root/zfs_set/canmount_001_pos.ksh \ functional/cli_root/zfs_set/canmount_002_pos.ksh \ functional/cli_root/zfs_set/canmount_003_pos.ksh \ functional/cli_root/zfs_set/canmount_004_pos.ksh \ functional/cli_root/zfs_set/checksum_001_pos.ksh \ functional/cli_root/zfs_set/cleanup.ksh \ functional/cli_root/zfs_set/compression_001_pos.ksh \ functional/cli_root/zfs_set/mountpoint_001_pos.ksh \ functional/cli_root/zfs_set/mountpoint_002_pos.ksh \ functional/cli_root/zfs_set/mountpoint_003_pos.ksh \ functional/cli_root/zfs_set/onoffs_001_pos.ksh \ functional/cli_root/zfs_set/property_alias_001_pos.ksh \ functional/cli_root/zfs_set/readonly_001_pos.ksh \ functional/cli_root/zfs_set/reservation_001_neg.ksh \ functional/cli_root/zfs_set/ro_props_001_pos.ksh \ functional/cli_root/zfs_set/setup.ksh \ functional/cli_root/zfs_set/share_mount_001_neg.ksh \ functional/cli_root/zfs_set/snapdir_001_pos.ksh \ functional/cli_root/zfs/setup.ksh \ functional/cli_root/zfs_set/user_property_001_pos.ksh \ functional/cli_root/zfs_set/user_property_002_pos.ksh \ functional/cli_root/zfs_set/user_property_003_neg.ksh \ functional/cli_root/zfs_set/user_property_004_pos.ksh \ functional/cli_root/zfs_set/version_001_neg.ksh \ functional/cli_root/zfs_set/zfs_set_001_neg.ksh \ functional/cli_root/zfs_set/zfs_set_002_neg.ksh \ functional/cli_root/zfs_set/zfs_set_003_neg.ksh \ functional/cli_root/zfs_set/zfs_set_feature_activation.ksh \ functional/cli_root/zfs_set/zfs_set_keylocation.ksh \ functional/cli_root/zfs_set/zfs_set_nomount.ksh \ functional/cli_root/zfs_share/cleanup.ksh \ functional/cli_root/zfs_share/setup.ksh \ functional/cli_root/zfs_share/zfs_share_001_pos.ksh \ functional/cli_root/zfs_share/zfs_share_002_pos.ksh \ functional/cli_root/zfs_share/zfs_share_003_pos.ksh \ functional/cli_root/zfs_share/zfs_share_004_pos.ksh \ functional/cli_root/zfs_share/zfs_share_005_pos.ksh \ functional/cli_root/zfs_share/zfs_share_006_pos.ksh \ functional/cli_root/zfs_share/zfs_share_007_neg.ksh \ functional/cli_root/zfs_share/zfs_share_008_neg.ksh \ functional/cli_root/zfs_share/zfs_share_009_neg.ksh \ functional/cli_root/zfs_share/zfs_share_010_neg.ksh \ functional/cli_root/zfs_share/zfs_share_011_pos.ksh \ functional/cli_root/zfs_share/zfs_share_012_pos.ksh \ functional/cli_root/zfs_share/zfs_share_013_pos.ksh \ functional/cli_root/zfs_share/zfs_share_concurrent_shares.ksh \ functional/cli_root/zfs_snapshot/cleanup.ksh \ functional/cli_root/zfs_snapshot/setup.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_001_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_002_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_003_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_004_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_005_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_006_pos.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_007_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_008_neg.ksh \ functional/cli_root/zfs_snapshot/zfs_snapshot_009_pos.ksh \ functional/cli_root/zfs_sysfs/cleanup.ksh \ functional/cli_root/zfs_sysfs/setup.ksh \ functional/cli_root/zfs_sysfs/zfeature_set_unsupported.ksh \ functional/cli_root/zfs_sysfs/zfs_get_unsupported.ksh \ functional/cli_root/zfs_sysfs/zfs_set_unsupported.ksh \ functional/cli_root/zfs_sysfs/zfs_sysfs_live.ksh \ functional/cli_root/zfs_sysfs/zpool_get_unsupported.ksh \ functional/cli_root/zfs_sysfs/zpool_set_unsupported.ksh \ functional/cli_root/zfs_unload-key/cleanup.ksh \ functional/cli_root/zfs_unload-key/setup.ksh \ functional/cli_root/zfs_unload-key/zfs_unload-key_all.ksh \ functional/cli_root/zfs_unload-key/zfs_unload-key.ksh \ functional/cli_root/zfs_unload-key/zfs_unload-key_recursive.ksh \ functional/cli_root/zfs_unmount/cleanup.ksh \ functional/cli_root/zfs_unmount/setup.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_001_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_002_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_003_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_004_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_005_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_006_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_007_neg.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_008_neg.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_009_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_all_001_pos.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_nested.ksh \ functional/cli_root/zfs_unmount/zfs_unmount_unload_keys.ksh \ functional/cli_root/zfs_unshare/cleanup.ksh \ functional/cli_root/zfs_unshare/setup.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_001_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_002_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_003_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_004_neg.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_005_neg.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_006_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_007_pos.ksh \ functional/cli_root/zfs_unshare/zfs_unshare_008_pos.ksh \ functional/cli_root/zfs_upgrade/cleanup.ksh \ functional/cli_root/zfs_upgrade/setup.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_001_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_002_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_003_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_004_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_005_pos.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_006_neg.ksh \ functional/cli_root/zfs_upgrade/zfs_upgrade_007_neg.ksh \ functional/cli_root/zfs_wait/cleanup.ksh \ functional/cli_root/zfs_wait/setup.ksh \ functional/cli_root/zfs_wait/zfs_wait_deleteq.ksh \ functional/cli_root/zfs_wait/zfs_wait_getsubopt.ksh \ functional/cli_root/zfs/zfs_001_neg.ksh \ functional/cli_root/zfs/zfs_002_pos.ksh \ functional/cli_root/zfs/zfs_003_neg.ksh \ functional/cli_root/zhack/zhack_label_repair_001.ksh \ functional/cli_root/zhack/zhack_label_repair_002.ksh \ functional/cli_root/zhack/zhack_label_repair_003.ksh \ functional/cli_root/zhack/zhack_label_repair_004.ksh \ functional/cli_root/zpool_add/add_nested_replacing_spare.ksh \ functional/cli_root/zpool_add/add-o_ashift.ksh \ functional/cli_root/zpool_add/add_prop_ashift.ksh \ functional/cli_root/zpool_add/cleanup.ksh \ functional/cli_root/zpool_add/setup.ksh \ functional/cli_root/zpool_add/zpool_add_001_pos.ksh \ functional/cli_root/zpool_add/zpool_add_002_pos.ksh \ functional/cli_root/zpool_add/zpool_add_003_pos.ksh \ functional/cli_root/zpool_add/zpool_add_004_pos.ksh \ functional/cli_root/zpool_add/zpool_add_005_pos.ksh \ functional/cli_root/zpool_add/zpool_add_006_pos.ksh \ functional/cli_root/zpool_add/zpool_add_007_neg.ksh \ functional/cli_root/zpool_add/zpool_add_008_neg.ksh \ functional/cli_root/zpool_add/zpool_add_009_neg.ksh \ functional/cli_root/zpool_add/zpool_add_010_pos.ksh \ functional/cli_root/zpool_add/zpool_add_dryrun_output.ksh \ functional/cli_root/zpool_attach/attach-o_ashift.ksh \ functional/cli_root/zpool_attach/cleanup.ksh \ functional/cli_root/zpool_attach/setup.ksh \ functional/cli_root/zpool_attach/zpool_attach_001_neg.ksh \ functional/cli_root/zpool/cleanup.ksh \ functional/cli_root/zpool_clear/cleanup.ksh \ functional/cli_root/zpool_clear/setup.ksh \ functional/cli_root/zpool_clear/zpool_clear_001_pos.ksh \ functional/cli_root/zpool_clear/zpool_clear_002_neg.ksh \ functional/cli_root/zpool_clear/zpool_clear_003_neg.ksh \ functional/cli_root/zpool_clear/zpool_clear_readonly.ksh \ functional/cli_root/zpool_create/cleanup.ksh \ functional/cli_root/zpool_create/create-o_ashift.ksh \ functional/cli_root/zpool_create/setup.ksh \ functional/cli_root/zpool_create/zpool_create_001_pos.ksh \ functional/cli_root/zpool_create/zpool_create_002_pos.ksh \ functional/cli_root/zpool_create/zpool_create_003_pos.ksh \ functional/cli_root/zpool_create/zpool_create_004_pos.ksh \ functional/cli_root/zpool_create/zpool_create_005_pos.ksh \ functional/cli_root/zpool_create/zpool_create_006_pos.ksh \ functional/cli_root/zpool_create/zpool_create_007_neg.ksh \ functional/cli_root/zpool_create/zpool_create_008_pos.ksh \ functional/cli_root/zpool_create/zpool_create_009_neg.ksh \ functional/cli_root/zpool_create/zpool_create_010_neg.ksh \ functional/cli_root/zpool_create/zpool_create_011_neg.ksh \ functional/cli_root/zpool_create/zpool_create_012_neg.ksh \ functional/cli_root/zpool_create/zpool_create_014_neg.ksh \ functional/cli_root/zpool_create/zpool_create_015_neg.ksh \ functional/cli_root/zpool_create/zpool_create_016_pos.ksh \ functional/cli_root/zpool_create/zpool_create_017_neg.ksh \ functional/cli_root/zpool_create/zpool_create_018_pos.ksh \ functional/cli_root/zpool_create/zpool_create_019_pos.ksh \ functional/cli_root/zpool_create/zpool_create_020_pos.ksh \ functional/cli_root/zpool_create/zpool_create_021_pos.ksh \ functional/cli_root/zpool_create/zpool_create_022_pos.ksh \ functional/cli_root/zpool_create/zpool_create_023_neg.ksh \ functional/cli_root/zpool_create/zpool_create_024_pos.ksh \ functional/cli_root/zpool_create/zpool_create_crypt_combos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_001_pos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_002_pos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_003_pos.ksh \ functional/cli_root/zpool_create/zpool_create_draid_004_pos.ksh \ functional/cli_root/zpool_create/zpool_create_dryrun_output.ksh \ functional/cli_root/zpool_create/zpool_create_encrypted.ksh \ functional/cli_root/zpool_create/zpool_create_features_001_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_002_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_003_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_004_neg.ksh \ functional/cli_root/zpool_create/zpool_create_features_005_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_006_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_007_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_008_pos.ksh \ functional/cli_root/zpool_create/zpool_create_features_009_pos.ksh \ functional/cli_root/zpool_create/zpool_create_tempname.ksh \ functional/cli_root/zpool_destroy/zpool_destroy_001_pos.ksh \ functional/cli_root/zpool_destroy/zpool_destroy_002_pos.ksh \ functional/cli_root/zpool_destroy/zpool_destroy_003_neg.ksh \ functional/cli_root/zpool_detach/cleanup.ksh \ functional/cli_root/zpool_detach/setup.ksh \ functional/cli_root/zpool_detach/zpool_detach_001_neg.ksh \ functional/cli_root/zpool_events/cleanup.ksh \ functional/cli_root/zpool_events/setup.ksh \ functional/cli_root/zpool_events/zpool_events_clear.ksh \ functional/cli_root/zpool_events/zpool_events_clear_retained.ksh \ functional/cli_root/zpool_events/zpool_events_cliargs.ksh \ functional/cli_root/zpool_events/zpool_events_duplicates.ksh \ functional/cli_root/zpool_events/zpool_events_errors.ksh \ functional/cli_root/zpool_events/zpool_events_follow.ksh \ functional/cli_root/zpool_events/zpool_events_poolname.ksh \ functional/cli_root/zpool_expand/cleanup.ksh \ functional/cli_root/zpool_expand/setup.ksh \ functional/cli_root/zpool_expand/zpool_expand_001_pos.ksh \ functional/cli_root/zpool_expand/zpool_expand_002_pos.ksh \ functional/cli_root/zpool_expand/zpool_expand_003_neg.ksh \ functional/cli_root/zpool_expand/zpool_expand_004_pos.ksh \ functional/cli_root/zpool_expand/zpool_expand_005_pos.ksh \ functional/cli_root/zpool_export/cleanup.ksh \ functional/cli_root/zpool_export/setup.ksh \ functional/cli_root/zpool_export/zpool_export_001_pos.ksh \ functional/cli_root/zpool_export/zpool_export_002_pos.ksh \ functional/cli_root/zpool_export/zpool_export_003_neg.ksh \ functional/cli_root/zpool_export/zpool_export_004_pos.ksh \ functional/cli_root/zpool_get/cleanup.ksh \ functional/cli_root/zpool_get/setup.ksh \ functional/cli_root/zpool_get/vdev_get_001_pos.ksh \ functional/cli_root/zpool_get/zpool_get_001_pos.ksh \ functional/cli_root/zpool_get/zpool_get_002_pos.ksh \ functional/cli_root/zpool_get/zpool_get_003_pos.ksh \ functional/cli_root/zpool_get/zpool_get_004_neg.ksh \ functional/cli_root/zpool_get/zpool_get_005_pos.ksh \ functional/cli_root/zpool_history/cleanup.ksh \ functional/cli_root/zpool_history/setup.ksh \ functional/cli_root/zpool_history/zpool_history_001_neg.ksh \ functional/cli_root/zpool_history/zpool_history_002_pos.ksh \ functional/cli_root/zpool_import/cleanup.ksh \ functional/cli_root/zpool_import/import_cachefile_device_added.ksh \ functional/cli_root/zpool_import/import_cachefile_device_removed.ksh \ functional/cli_root/zpool_import/import_cachefile_device_replaced.ksh \ functional/cli_root/zpool_import/import_cachefile_mirror_attached.ksh \ functional/cli_root/zpool_import/import_cachefile_mirror_detached.ksh \ functional/cli_root/zpool_import/import_cachefile_paths_changed.ksh \ functional/cli_root/zpool_import/import_cachefile_shared_device.ksh \ functional/cli_root/zpool_import/import_devices_missing.ksh \ functional/cli_root/zpool_import/import_log_missing.ksh \ functional/cli_root/zpool_import/import_paths_changed.ksh \ functional/cli_root/zpool_import/import_rewind_config_changed.ksh \ functional/cli_root/zpool_import/import_rewind_device_replaced.ksh \ functional/cli_root/zpool_import/setup.ksh \ functional/cli_root/zpool_import/zpool_import_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_002_pos.ksh \ functional/cli_root/zpool_import/zpool_import_003_pos.ksh \ functional/cli_root/zpool_import/zpool_import_004_pos.ksh \ functional/cli_root/zpool_import/zpool_import_005_pos.ksh \ functional/cli_root/zpool_import/zpool_import_006_pos.ksh \ functional/cli_root/zpool_import/zpool_import_007_pos.ksh \ functional/cli_root/zpool_import/zpool_import_008_pos.ksh \ functional/cli_root/zpool_import/zpool_import_009_neg.ksh \ functional/cli_root/zpool_import/zpool_import_010_pos.ksh \ functional/cli_root/zpool_import/zpool_import_011_neg.ksh \ functional/cli_root/zpool_import/zpool_import_012_pos.ksh \ functional/cli_root/zpool_import/zpool_import_013_neg.ksh \ functional/cli_root/zpool_import/zpool_import_014_pos.ksh \ functional/cli_root/zpool_import/zpool_import_015_pos.ksh \ functional/cli_root/zpool_import/zpool_import_016_pos.ksh \ functional/cli_root/zpool_import/zpool_import_017_pos.ksh \ functional/cli_root/zpool_import/zpool_import_all_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_encrypted.ksh \ functional/cli_root/zpool_import/zpool_import_encrypted_load.ksh \ functional/cli_root/zpool_import/zpool_import_errata3.ksh \ functional/cli_root/zpool_import/zpool_import_errata4.ksh \ functional/cli_root/zpool_import/zpool_import_features_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_features_002_neg.ksh \ functional/cli_root/zpool_import/zpool_import_features_003_pos.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed_unclean_export.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed_cachefile.ksh \ functional/cli_root/zpool_import/zpool_import_hostid_changed_cachefile_unclean_export.ksh \ functional/cli_root/zpool_import/zpool_import_missing_001_pos.ksh \ functional/cli_root/zpool_import/zpool_import_missing_002_pos.ksh \ functional/cli_root/zpool_import/zpool_import_missing_003_pos.ksh \ functional/cli_root/zpool_import/zpool_import_rename_001_pos.ksh \ functional/cli_root/zpool_initialize/cleanup.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_attach_detach_add_remove.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_fault_export_import_online.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_import_export.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_offline_export_import_online.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_online_offline.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_split.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_start_and_cancel_neg.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_start_and_cancel_pos.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_suspend_resume.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_uninit.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_unsupported_vdevs.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_verify_checksums.ksh \ functional/cli_root/zpool_initialize/zpool_initialize_verify_initialized.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_active.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_exported.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_removed.ksh \ functional/cli_root/zpool_labelclear/zpool_labelclear_valid.ksh \ functional/cli_root/zpool_offline/cleanup.ksh \ functional/cli_root/zpool_offline/setup.ksh \ functional/cli_root/zpool_offline/zpool_offline_001_pos.ksh \ functional/cli_root/zpool_offline/zpool_offline_002_neg.ksh \ functional/cli_root/zpool_offline/zpool_offline_003_pos.ksh \ functional/cli_root/zpool_online/cleanup.ksh \ functional/cli_root/zpool_online/setup.ksh \ functional/cli_root/zpool_online/zpool_online_001_pos.ksh \ functional/cli_root/zpool_online/zpool_online_002_neg.ksh \ functional/cli_root/zpool_remove/cleanup.ksh \ functional/cli_root/zpool_remove/setup.ksh \ functional/cli_root/zpool_remove/zpool_remove_001_neg.ksh \ functional/cli_root/zpool_remove/zpool_remove_002_pos.ksh \ functional/cli_root/zpool_remove/zpool_remove_003_pos.ksh \ functional/cli_root/zpool_reopen/cleanup.ksh \ functional/cli_root/zpool_reopen/setup.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_001_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_002_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_003_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_004_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_005_pos.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_006_neg.ksh \ functional/cli_root/zpool_reopen/zpool_reopen_007_pos.ksh \ functional/cli_root/zpool_replace/cleanup.ksh \ functional/cli_root/zpool_replace/replace-o_ashift.ksh \ functional/cli_root/zpool_replace/replace_prop_ashift.ksh \ functional/cli_root/zpool_replace/setup.ksh \ functional/cli_root/zpool_replace/zpool_replace_001_neg.ksh \ functional/cli_root/zpool_resilver/cleanup.ksh \ functional/cli_root/zpool_resilver/setup.ksh \ functional/cli_root/zpool_resilver/zpool_resilver_bad_args.ksh \ functional/cli_root/zpool_resilver/zpool_resilver_restart.ksh \ functional/cli_root/zpool_resilver/zpool_resilver_concurrent.ksh \ functional/cli_root/zpool_scrub/cleanup.ksh \ functional/cli_root/zpool_scrub/setup.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_001_neg.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_002_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_003_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_004_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_005_pos.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_encrypted_unloaded.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_multiple_copies.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_offline_device.ksh \ functional/cli_root/zpool_scrub/zpool_scrub_print_repairing.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_001_pos.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_002_pos.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_003_pos.ksh \ functional/cli_root/zpool_scrub/zpool_error_scrub_004_pos.ksh \ functional/cli_root/zpool_set/cleanup.ksh \ functional/cli_root/zpool_set/setup.ksh \ functional/cli_root/zpool/setup.ksh \ functional/cli_root/zpool_set/vdev_set_001_pos.ksh \ functional/cli_root/zpool_set/zpool_set_common.kshlib \ functional/cli_root/zpool_set/zpool_set_001_pos.ksh \ functional/cli_root/zpool_set/zpool_set_002_neg.ksh \ functional/cli_root/zpool_set/zpool_set_003_neg.ksh \ functional/cli_root/zpool_set/zpool_set_ashift.ksh \ functional/cli_root/zpool_set/user_property_001_pos.ksh \ functional/cli_root/zpool_set/user_property_002_neg.ksh \ functional/cli_root/zpool_set/zpool_set_features.ksh \ functional/cli_root/zpool_split/cleanup.ksh \ functional/cli_root/zpool_split/setup.ksh \ functional/cli_root/zpool_split/zpool_split_cliargs.ksh \ functional/cli_root/zpool_split/zpool_split_devices.ksh \ functional/cli_root/zpool_split/zpool_split_dryrun_output.ksh \ functional/cli_root/zpool_split/zpool_split_encryption.ksh \ functional/cli_root/zpool_split/zpool_split_indirect.ksh \ functional/cli_root/zpool_split/zpool_split_props.ksh \ functional/cli_root/zpool_split/zpool_split_resilver.ksh \ functional/cli_root/zpool_split/zpool_split_vdevs.ksh \ functional/cli_root/zpool_split/zpool_split_wholedisk.ksh \ functional/cli_root/zpool_status/cleanup.ksh \ functional/cli_root/zpool_status/setup.ksh \ functional/cli_root/zpool_status/zpool_status_001_pos.ksh \ functional/cli_root/zpool_status/zpool_status_002_pos.ksh \ functional/cli_root/zpool_status/zpool_status_003_pos.ksh \ functional/cli_root/zpool_status/zpool_status_004_pos.ksh \ functional/cli_root/zpool_status/zpool_status_005_pos.ksh \ functional/cli_root/zpool_status/zpool_status_006_pos.ksh \ functional/cli_root/zpool_status/zpool_status_007_pos.ksh \ functional/cli_root/zpool_status/zpool_status_features_001_pos.ksh \ functional/cli_root/zpool_sync/cleanup.ksh \ functional/cli_root/zpool_sync/setup.ksh \ functional/cli_root/zpool_sync/zpool_sync_001_pos.ksh \ functional/cli_root/zpool_sync/zpool_sync_002_neg.ksh \ functional/cli_root/zpool_trim/cleanup.ksh \ functional/cli_root/zpool_trim/setup.ksh \ functional/cli_root/zpool_trim/zpool_trim_attach_detach_add_remove.ksh \ functional/cli_root/zpool_trim/zpool_trim_fault_export_import_online.ksh \ functional/cli_root/zpool_trim/zpool_trim_import_export.ksh \ functional/cli_root/zpool_trim/zpool_trim_multiple.ksh \ functional/cli_root/zpool_trim/zpool_trim_neg.ksh \ functional/cli_root/zpool_trim/zpool_trim_offline_export_import_online.ksh \ functional/cli_root/zpool_trim/zpool_trim_online_offline.ksh \ functional/cli_root/zpool_trim/zpool_trim_partial.ksh \ functional/cli_root/zpool_trim/zpool_trim_rate.ksh \ functional/cli_root/zpool_trim/zpool_trim_rate_neg.ksh \ functional/cli_root/zpool_trim/zpool_trim_secure.ksh \ functional/cli_root/zpool_trim/zpool_trim_split.ksh \ functional/cli_root/zpool_trim/zpool_trim_start_and_cancel_neg.ksh \ functional/cli_root/zpool_trim/zpool_trim_start_and_cancel_pos.ksh \ functional/cli_root/zpool_trim/zpool_trim_suspend_resume.ksh \ functional/cli_root/zpool_trim/zpool_trim_unsupported_vdevs.ksh \ functional/cli_root/zpool_trim/zpool_trim_verify_checksums.ksh \ functional/cli_root/zpool_trim/zpool_trim_verify_trimmed.ksh \ functional/cli_root/zpool_upgrade/cleanup.ksh \ functional/cli_root/zpool_upgrade/setup.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_001_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_002_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_003_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_004_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_005_neg.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_006_neg.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_007_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_008_pos.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_009_neg.ksh \ functional/cli_root/zpool_upgrade/zpool_upgrade_features_001_pos.ksh \ functional/cli_root/zpool_wait/cleanup.ksh \ functional/cli_root/zpool_wait/scan/cleanup.ksh \ functional/cli_root/zpool_wait/scan/setup.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_rebuild.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_replace_cancel.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_replace.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_resilver.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_scrub_basic.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_scrub_cancel.ksh \ functional/cli_root/zpool_wait/scan/zpool_wait_scrub_flag.ksh \ functional/cli_root/zpool_wait/setup.ksh \ functional/cli_root/zpool_wait/zpool_wait_discard.ksh \ functional/cli_root/zpool_wait/zpool_wait_freeing.ksh \ functional/cli_root/zpool_wait/zpool_wait_initialize_basic.ksh \ functional/cli_root/zpool_wait/zpool_wait_initialize_cancel.ksh \ functional/cli_root/zpool_wait/zpool_wait_initialize_flag.ksh \ functional/cli_root/zpool_wait/zpool_wait_multiple.ksh \ functional/cli_root/zpool_wait/zpool_wait_no_activity.ksh \ functional/cli_root/zpool_wait/zpool_wait_remove_cancel.ksh \ functional/cli_root/zpool_wait/zpool_wait_remove.ksh \ functional/cli_root/zpool_wait/zpool_wait_trim_basic.ksh \ functional/cli_root/zpool_wait/zpool_wait_trim_cancel.ksh \ functional/cli_root/zpool_wait/zpool_wait_trim_flag.ksh \ functional/cli_root/zpool_wait/zpool_wait_usage.ksh \ functional/cli_root/zpool/zpool_001_neg.ksh \ functional/cli_root/zpool/zpool_002_pos.ksh \ functional/cli_root/zpool/zpool_003_pos.ksh \ functional/cli_root/zpool/zpool_colors.ksh \ functional/cli_user/misc/arcstat_001_pos.ksh \ functional/cli_user/misc/arc_summary_001_pos.ksh \ functional/cli_user/misc/arc_summary_002_neg.ksh \ functional/cli_user/misc/zilstat_001_pos.ksh \ functional/cli_user/misc/cleanup.ksh \ functional/cli_user/misc/setup.ksh \ functional/cli_user/misc/zdb_001_neg.ksh \ functional/cli_user/misc/zfs_001_neg.ksh \ functional/cli_user/misc/zfs_allow_001_neg.ksh \ functional/cli_user/misc/zfs_clone_001_neg.ksh \ functional/cli_user/misc/zfs_create_001_neg.ksh \ functional/cli_user/misc/zfs_destroy_001_neg.ksh \ functional/cli_user/misc/zfs_get_001_neg.ksh \ functional/cli_user/misc/zfs_inherit_001_neg.ksh \ functional/cli_user/misc/zfs_mount_001_neg.ksh \ functional/cli_user/misc/zfs_promote_001_neg.ksh \ functional/cli_user/misc/zfs_receive_001_neg.ksh \ functional/cli_user/misc/zfs_rename_001_neg.ksh \ functional/cli_user/misc/zfs_rollback_001_neg.ksh \ functional/cli_user/misc/zfs_send_001_neg.ksh \ functional/cli_user/misc/zfs_set_001_neg.ksh \ functional/cli_user/misc/zfs_share_001_neg.ksh \ functional/cli_user/misc/zfs_snapshot_001_neg.ksh \ functional/cli_user/misc/zfs_unallow_001_neg.ksh \ functional/cli_user/misc/zfs_unmount_001_neg.ksh \ functional/cli_user/misc/zfs_unshare_001_neg.ksh \ functional/cli_user/misc/zfs_upgrade_001_neg.ksh \ functional/cli_user/misc/zpool_001_neg.ksh \ functional/cli_user/misc/zpool_add_001_neg.ksh \ functional/cli_user/misc/zpool_attach_001_neg.ksh \ functional/cli_user/misc/zpool_clear_001_neg.ksh \ functional/cli_user/misc/zpool_create_001_neg.ksh \ functional/cli_user/misc/zpool_destroy_001_neg.ksh \ functional/cli_user/misc/zpool_detach_001_neg.ksh \ functional/cli_user/misc/zpool_export_001_neg.ksh \ functional/cli_user/misc/zpool_get_001_neg.ksh \ functional/cli_user/misc/zpool_history_001_neg.ksh \ functional/cli_user/misc/zpool_import_001_neg.ksh \ functional/cli_user/misc/zpool_import_002_neg.ksh \ functional/cli_user/misc/zpool_offline_001_neg.ksh \ functional/cli_user/misc/zpool_online_001_neg.ksh \ functional/cli_user/misc/zpool_remove_001_neg.ksh \ functional/cli_user/misc/zpool_replace_001_neg.ksh \ functional/cli_user/misc/zpool_scrub_001_neg.ksh \ functional/cli_user/misc/zpool_set_001_neg.ksh \ functional/cli_user/misc/zpool_status_001_neg.ksh \ functional/cli_user/misc/zpool_upgrade_001_neg.ksh \ functional/cli_user/misc/zpool_wait_privilege.ksh \ functional/cli_user/zfs_list/cleanup.ksh \ functional/cli_user/zfs_list/setup.ksh \ functional/cli_user/zfs_list/zfs_list_001_pos.ksh \ functional/cli_user/zfs_list/zfs_list_002_pos.ksh \ functional/cli_user/zfs_list/zfs_list_003_pos.ksh \ functional/cli_user/zfs_list/zfs_list_004_neg.ksh \ functional/cli_user/zfs_list/zfs_list_005_neg.ksh \ functional/cli_user/zfs_list/zfs_list_007_pos.ksh \ functional/cli_user/zfs_list/zfs_list_008_neg.ksh \ functional/cli_user/zpool_iostat/cleanup.ksh \ functional/cli_user/zpool_iostat/setup.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_001_neg.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_002_pos.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_003_neg.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_004_pos.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_005_pos.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_-c_disable.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_-c_homedir.ksh \ functional/cli_user/zpool_iostat/zpool_iostat_-c_searchpath.ksh \ functional/cli_user/zpool_list/cleanup.ksh \ functional/cli_user/zpool_list/setup.ksh \ functional/cli_user/zpool_list/zpool_list_001_pos.ksh \ functional/cli_user/zpool_list/zpool_list_002_neg.ksh \ functional/cli_user/zpool_status/cleanup.ksh \ functional/cli_user/zpool_status/setup.ksh \ functional/cli_user/zpool_status/zpool_status_003_pos.ksh \ functional/cli_user/zpool_status/zpool_status_-c_disable.ksh \ functional/cli_user/zpool_status/zpool_status_-c_homedir.ksh \ functional/cli_user/zpool_status/zpool_status_-c_searchpath.ksh \ functional/compression/cleanup.ksh \ functional/compression/compress_001_pos.ksh \ functional/compression/compress_002_pos.ksh \ functional/compression/compress_003_pos.ksh \ functional/compression/compress_004_pos.ksh \ functional/compression/compress_zstd_bswap.ksh \ functional/compression/l2arc_compressed_arc_disabled.ksh \ functional/compression/l2arc_compressed_arc.ksh \ functional/compression/l2arc_encrypted.ksh \ functional/compression/l2arc_encrypted_no_compressed_arc.ksh \ functional/compression/setup.ksh \ functional/cp_files/cleanup.ksh \ functional/cp_files/cp_files_001_pos.ksh \ functional/cp_files/setup.ksh \ functional/crtime/cleanup.ksh \ functional/crtime/crtime_001_pos.ksh \ functional/crtime/setup.ksh \ functional/ctime/cleanup.ksh \ functional/ctime/ctime_001_pos.ksh \ functional/ctime/setup.ksh \ functional/deadman/deadman_ratelimit.ksh \ functional/deadman/deadman_sync.ksh \ functional/deadman/deadman_zio.ksh \ functional/delegate/cleanup.ksh \ functional/delegate/setup.ksh \ functional/delegate/zfs_allow_001_pos.ksh \ functional/delegate/zfs_allow_002_pos.ksh \ functional/delegate/zfs_allow_003_pos.ksh \ functional/delegate/zfs_allow_004_pos.ksh \ functional/delegate/zfs_allow_005_pos.ksh \ functional/delegate/zfs_allow_006_pos.ksh \ functional/delegate/zfs_allow_007_pos.ksh \ functional/delegate/zfs_allow_008_pos.ksh \ functional/delegate/zfs_allow_009_neg.ksh \ functional/delegate/zfs_allow_010_pos.ksh \ functional/delegate/zfs_allow_011_neg.ksh \ functional/delegate/zfs_allow_012_neg.ksh \ functional/delegate/zfs_unallow_001_pos.ksh \ functional/delegate/zfs_unallow_002_pos.ksh \ functional/delegate/zfs_unallow_003_pos.ksh \ functional/delegate/zfs_unallow_004_pos.ksh \ functional/delegate/zfs_unallow_005_pos.ksh \ functional/delegate/zfs_unallow_006_pos.ksh \ functional/delegate/zfs_unallow_007_neg.ksh \ functional/delegate/zfs_unallow_008_neg.ksh \ functional/devices/cleanup.ksh \ functional/devices/devices_001_pos.ksh \ functional/devices/devices_002_neg.ksh \ functional/devices/devices_003_pos.ksh \ functional/devices/setup.ksh \ functional/dos_attributes/cleanup.ksh \ functional/dos_attributes/read_dos_attrs_001.ksh \ functional/dos_attributes/setup.ksh \ functional/dos_attributes/write_dos_attrs_001.ksh \ functional/events/cleanup.ksh \ functional/events/events_001_pos.ksh \ functional/events/events_002_pos.ksh \ functional/events/setup.ksh \ functional/events/zed_cksum_config.ksh \ functional/events/zed_cksum_reported.ksh \ functional/events/zed_fd_spill.ksh \ functional/events/zed_io_config.ksh \ functional/events/zed_rc_filter.ksh \ functional/exec/cleanup.ksh \ functional/exec/exec_001_pos.ksh \ functional/exec/exec_002_neg.ksh \ functional/exec/setup.ksh \ functional/fadvise/cleanup.ksh \ functional/fadvise/fadvise_sequential.ksh \ functional/fadvise/setup.ksh \ functional/fallocate/cleanup.ksh \ functional/fallocate/fallocate_prealloc.ksh \ functional/fallocate/fallocate_punch-hole.ksh \ functional/fallocate/fallocate_zero-range.ksh \ functional/fallocate/setup.ksh \ functional/fault/auto_offline_001_pos.ksh \ functional/fault/auto_online_001_pos.ksh \ functional/fault/auto_online_002_pos.ksh \ functional/fault/auto_replace_001_pos.ksh \ + functional/fault/auto_replace_002_pos.ksh \ functional/fault/auto_spare_001_pos.ksh \ functional/fault/auto_spare_002_pos.ksh \ functional/fault/auto_spare_ashift.ksh \ functional/fault/auto_spare_multiple.ksh \ functional/fault/auto_spare_shared.ksh \ functional/fault/cleanup.ksh \ functional/fault/decompress_fault.ksh \ functional/fault/decrypt_fault.ksh \ functional/fault/scrub_after_resilver.ksh \ functional/fault/setup.ksh \ functional/fault/zpool_status_-s.ksh \ functional/features/async_destroy/async_destroy_001_pos.ksh \ functional/features/async_destroy/cleanup.ksh \ functional/features/async_destroy/setup.ksh \ functional/features/large_dnode/cleanup.ksh \ functional/features/large_dnode/large_dnode_001_pos.ksh \ functional/features/large_dnode/large_dnode_002_pos.ksh \ functional/features/large_dnode/large_dnode_003_pos.ksh \ functional/features/large_dnode/large_dnode_004_neg.ksh \ functional/features/large_dnode/large_dnode_005_pos.ksh \ functional/features/large_dnode/large_dnode_006_pos.ksh \ functional/features/large_dnode/large_dnode_007_neg.ksh \ functional/features/large_dnode/large_dnode_008_pos.ksh \ functional/features/large_dnode/large_dnode_009_pos.ksh \ functional/features/large_dnode/setup.ksh \ functional/grow/grow_pool_001_pos.ksh \ functional/grow/grow_replicas_001_pos.ksh \ functional/history/cleanup.ksh \ functional/history/history_001_pos.ksh \ functional/history/history_002_pos.ksh \ functional/history/history_003_pos.ksh \ functional/history/history_004_pos.ksh \ functional/history/history_005_neg.ksh \ functional/history/history_006_neg.ksh \ functional/history/history_007_pos.ksh \ functional/history/history_008_pos.ksh \ functional/history/history_009_pos.ksh \ functional/history/history_010_pos.ksh \ functional/history/setup.ksh \ functional/inheritance/cleanup.ksh \ functional/inheritance/inherit_001_pos.ksh \ functional/inuse/inuse_001_pos.ksh \ functional/inuse/inuse_003_pos.ksh \ functional/inuse/inuse_004_pos.ksh \ functional/inuse/inuse_005_pos.ksh \ functional/inuse/inuse_006_pos.ksh \ functional/inuse/inuse_007_pos.ksh \ functional/inuse/inuse_008_pos.ksh \ functional/inuse/inuse_009_pos.ksh \ functional/inuse/setup.ksh \ functional/io/cleanup.ksh \ functional/io/io_uring.ksh \ functional/io/libaio.ksh \ functional/io/mmap.ksh \ functional/io/posixaio.ksh \ functional/io/psync.ksh \ functional/io/setup.ksh \ functional/io/sync.ksh \ functional/l2arc/cleanup.ksh \ functional/l2arc/l2arc_arcstats_pos.ksh \ functional/l2arc/l2arc_l2miss_pos.ksh \ functional/l2arc/l2arc_mfuonly_pos.ksh \ functional/l2arc/persist_l2arc_001_pos.ksh \ functional/l2arc/persist_l2arc_002_pos.ksh \ functional/l2arc/persist_l2arc_003_neg.ksh \ functional/l2arc/persist_l2arc_004_pos.ksh \ functional/l2arc/persist_l2arc_005_pos.ksh \ functional/l2arc/setup.ksh \ functional/large_files/cleanup.ksh \ functional/large_files/large_files_001_pos.ksh \ functional/large_files/large_files_002_pos.ksh \ functional/large_files/setup.ksh \ functional/largest_pool/largest_pool_001_pos.ksh \ functional/libzfs/cleanup.ksh \ functional/libzfs/libzfs_input.ksh \ functional/libzfs/setup.ksh \ functional/limits/cleanup.ksh \ functional/limits/filesystem_count.ksh \ functional/limits/filesystem_limit.ksh \ functional/limits/setup.ksh \ functional/limits/snapshot_count.ksh \ functional/limits/snapshot_limit.ksh \ functional/link_count/cleanup.ksh \ functional/link_count/link_count_001.ksh \ functional/link_count/link_count_root_inode.ksh \ functional/link_count/setup.ksh \ functional/log_spacemap/log_spacemap_import_logs.ksh \ functional/migration/cleanup.ksh \ functional/migration/migration_001_pos.ksh \ functional/migration/migration_002_pos.ksh \ functional/migration/migration_003_pos.ksh \ functional/migration/migration_004_pos.ksh \ functional/migration/migration_005_pos.ksh \ functional/migration/migration_006_pos.ksh \ functional/migration/migration_007_pos.ksh \ functional/migration/migration_008_pos.ksh \ functional/migration/migration_009_pos.ksh \ functional/migration/migration_010_pos.ksh \ functional/migration/migration_011_pos.ksh \ functional/migration/migration_012_pos.ksh \ functional/migration/setup.ksh \ functional/mmap/cleanup.ksh \ functional/mmap/mmap_libaio_001_pos.ksh \ functional/mmap/mmap_mixed.ksh \ functional/mmap/mmap_read_001_pos.ksh \ functional/mmap/mmap_seek_001_pos.ksh \ functional/mmap/mmap_sync_001_pos.ksh \ functional/mmap/mmap_write_001_pos.ksh \ functional/mmap/setup.ksh \ functional/mmp/cleanup.ksh \ functional/mmp/mmp_active_import.ksh \ functional/mmp/mmp_exported_import.ksh \ functional/mmp/mmp_hostid.ksh \ functional/mmp/mmp_inactive_import.ksh \ functional/mmp/mmp_interval.ksh \ functional/mmp/mmp_on_off.ksh \ functional/mmp/mmp_on_thread.ksh \ functional/mmp/mmp_on_uberblocks.ksh \ functional/mmp/mmp_on_zdb.ksh \ functional/mmp/mmp_reset_interval.ksh \ functional/mmp/mmp_write_distribution.ksh \ functional/mmp/mmp_write_uberblocks.ksh \ functional/mmp/multihost_history.ksh \ functional/mmp/setup.ksh \ functional/mount/cleanup.ksh \ functional/mount/setup.ksh \ functional/mount/umount_001.ksh \ functional/mount/umountall_001.ksh \ functional/mount/umount_unlinked_drain.ksh \ functional/mv_files/cleanup.ksh \ functional/mv_files/mv_files_001_pos.ksh \ functional/mv_files/mv_files_002_pos.ksh \ functional/mv_files/random_creation.ksh \ functional/mv_files/setup.ksh \ functional/nestedfs/cleanup.ksh \ functional/nestedfs/nestedfs_001_pos.ksh \ functional/nestedfs/setup.ksh \ functional/nopwrite/cleanup.ksh \ functional/nopwrite/nopwrite_copies.ksh \ functional/nopwrite/nopwrite_mtime.ksh \ functional/nopwrite/nopwrite_negative.ksh \ functional/nopwrite/nopwrite_promoted_clone.ksh \ functional/nopwrite/nopwrite_recsize.ksh \ functional/nopwrite/nopwrite_sync.ksh \ functional/nopwrite/nopwrite_varying_compression.ksh \ functional/nopwrite/nopwrite_volume.ksh \ functional/nopwrite/setup.ksh \ functional/no_space/cleanup.ksh \ functional/no_space/enospc_001_pos.ksh \ functional/no_space/enospc_002_pos.ksh \ functional/no_space/enospc_003_pos.ksh \ functional/no_space/enospc_df.ksh \ functional/no_space/enospc_ganging.ksh \ functional/no_space/enospc_rm.ksh \ functional/no_space/setup.ksh \ functional/online_offline/cleanup.ksh \ functional/online_offline/online_offline_001_pos.ksh \ functional/online_offline/online_offline_002_neg.ksh \ functional/online_offline/online_offline_003_neg.ksh \ functional/online_offline/setup.ksh \ functional/pam/cleanup.ksh \ functional/pam/pam_basic.ksh \ functional/pam/pam_change_unmounted.ksh \ functional/pam/pam_nounmount.ksh \ functional/pam/pam_recursive.ksh \ functional/pam/pam_short_password.ksh \ functional/pam/setup.ksh \ functional/pool_checkpoint/checkpoint_after_rewind.ksh \ functional/pool_checkpoint/checkpoint_big_rewind.ksh \ functional/pool_checkpoint/checkpoint_capacity.ksh \ functional/pool_checkpoint/checkpoint_conf_change.ksh \ functional/pool_checkpoint/checkpoint_discard_busy.ksh \ functional/pool_checkpoint/checkpoint_discard.ksh \ functional/pool_checkpoint/checkpoint_discard_many.ksh \ functional/pool_checkpoint/checkpoint_indirect.ksh \ functional/pool_checkpoint/checkpoint_invalid.ksh \ functional/pool_checkpoint/checkpoint_lun_expsz.ksh \ functional/pool_checkpoint/checkpoint_open.ksh \ functional/pool_checkpoint/checkpoint_removal.ksh \ functional/pool_checkpoint/checkpoint_rewind.ksh \ functional/pool_checkpoint/checkpoint_ro_rewind.ksh \ functional/pool_checkpoint/checkpoint_sm_scale.ksh \ functional/pool_checkpoint/checkpoint_twice.ksh \ functional/pool_checkpoint/checkpoint_vdev_add.ksh \ functional/pool_checkpoint/checkpoint_zdb.ksh \ functional/pool_checkpoint/checkpoint_zhack_feat.ksh \ functional/pool_checkpoint/cleanup.ksh \ functional/pool_checkpoint/setup.ksh \ functional/pool_names/pool_names_001_pos.ksh \ functional/pool_names/pool_names_002_neg.ksh \ functional/poolversion/cleanup.ksh \ functional/poolversion/poolversion_001_pos.ksh \ functional/poolversion/poolversion_002_pos.ksh \ functional/poolversion/setup.ksh \ functional/privilege/cleanup.ksh \ functional/privilege/privilege_001_pos.ksh \ functional/privilege/privilege_002_pos.ksh \ functional/privilege/setup.ksh \ functional/procfs/cleanup.ksh \ functional/procfs/pool_state.ksh \ functional/procfs/procfs_list_basic.ksh \ functional/procfs/procfs_list_concurrent_readers.ksh \ functional/procfs/procfs_list_stale_read.ksh \ functional/procfs/setup.ksh \ functional/projectquota/cleanup.ksh \ functional/projectquota/projectid_001_pos.ksh \ functional/projectquota/projectid_002_pos.ksh \ functional/projectquota/projectid_003_pos.ksh \ functional/projectquota/projectquota_001_pos.ksh \ functional/projectquota/projectquota_002_pos.ksh \ functional/projectquota/projectquota_003_pos.ksh \ functional/projectquota/projectquota_004_neg.ksh \ functional/projectquota/projectquota_005_pos.ksh \ functional/projectquota/projectquota_006_pos.ksh \ functional/projectquota/projectquota_007_pos.ksh \ functional/projectquota/projectquota_008_pos.ksh \ functional/projectquota/projectquota_009_pos.ksh \ functional/projectquota/projectspace_001_pos.ksh \ functional/projectquota/projectspace_002_pos.ksh \ functional/projectquota/projectspace_003_pos.ksh \ functional/projectquota/projectspace_004_pos.ksh \ functional/projectquota/projecttree_001_pos.ksh \ functional/projectquota/projecttree_002_pos.ksh \ functional/projectquota/projecttree_003_neg.ksh \ functional/projectquota/setup.ksh \ functional/quota/cleanup.ksh \ functional/quota/quota_001_pos.ksh \ functional/quota/quota_002_pos.ksh \ functional/quota/quota_003_pos.ksh \ functional/quota/quota_004_pos.ksh \ functional/quota/quota_005_pos.ksh \ functional/quota/quota_006_neg.ksh \ functional/quota/setup.ksh \ functional/raidz/cleanup.ksh \ functional/raidz/raidz_001_neg.ksh \ functional/raidz/raidz_002_pos.ksh \ functional/raidz/raidz_003_pos.ksh \ functional/raidz/raidz_004_pos.ksh \ functional/raidz/setup.ksh \ functional/redacted_send/cleanup.ksh \ functional/redacted_send/redacted_compressed.ksh \ functional/redacted_send/redacted_contents.ksh \ functional/redacted_send/redacted_deleted.ksh \ functional/redacted_send/redacted_disabled_feature.ksh \ functional/redacted_send/redacted_embedded.ksh \ functional/redacted_send/redacted_holes.ksh \ functional/redacted_send/redacted_incrementals.ksh \ functional/redacted_send/redacted_largeblocks.ksh \ functional/redacted_send/redacted_many_clones.ksh \ functional/redacted_send/redacted_mixed_recsize.ksh \ functional/redacted_send/redacted_mounts.ksh \ functional/redacted_send/redacted_negative.ksh \ functional/redacted_send/redacted_origin.ksh \ functional/redacted_send/redacted_panic.ksh \ functional/redacted_send/redacted_props.ksh \ functional/redacted_send/redacted_resume.ksh \ functional/redacted_send/redacted_size.ksh \ functional/redacted_send/redacted_volume.ksh \ functional/redacted_send/setup.ksh \ functional/redundancy/cleanup.ksh \ functional/redundancy/redundancy_draid1.ksh \ functional/redundancy/redundancy_draid2.ksh \ functional/redundancy/redundancy_draid3.ksh \ functional/redundancy/redundancy_draid_damaged1.ksh \ functional/redundancy/redundancy_draid_damaged2.ksh \ functional/redundancy/redundancy_draid.ksh \ functional/redundancy/redundancy_draid_spare1.ksh \ functional/redundancy/redundancy_draid_spare2.ksh \ functional/redundancy/redundancy_draid_spare3.ksh \ functional/redundancy/redundancy_mirror.ksh \ functional/redundancy/redundancy_raidz1.ksh \ functional/redundancy/redundancy_raidz2.ksh \ functional/redundancy/redundancy_raidz3.ksh \ functional/redundancy/redundancy_raidz.ksh \ functional/redundancy/redundancy_stripe.ksh \ functional/redundancy/setup.ksh \ functional/refquota/cleanup.ksh \ functional/refquota/refquota_001_pos.ksh \ functional/refquota/refquota_002_pos.ksh \ functional/refquota/refquota_003_pos.ksh \ functional/refquota/refquota_004_pos.ksh \ functional/refquota/refquota_005_pos.ksh \ functional/refquota/refquota_006_neg.ksh \ functional/refquota/refquota_007_neg.ksh \ functional/refquota/refquota_008_neg.ksh \ functional/refquota/setup.ksh \ functional/refreserv/cleanup.ksh \ functional/refreserv/refreserv_001_pos.ksh \ functional/refreserv/refreserv_002_pos.ksh \ functional/refreserv/refreserv_003_pos.ksh \ functional/refreserv/refreserv_004_pos.ksh \ functional/refreserv/refreserv_005_pos.ksh \ functional/refreserv/refreserv_multi_raidz.ksh \ functional/refreserv/refreserv_raidz.ksh \ functional/refreserv/setup.ksh \ functional/removal/cleanup.ksh \ functional/removal/removal_all_vdev.ksh \ functional/removal/removal_cancel.ksh \ functional/removal/removal_check_space.ksh \ functional/removal/removal_condense_export.ksh \ functional/removal/removal_multiple_indirection.ksh \ functional/removal/removal_nopwrite.ksh \ functional/removal/removal_remap_deadlists.ksh \ functional/removal/removal_reservation.ksh \ functional/removal/removal_resume_export.ksh \ functional/removal/removal_sanity.ksh \ functional/removal/removal_with_add.ksh \ functional/removal/removal_with_create_fs.ksh \ functional/removal/removal_with_dedup.ksh \ functional/removal/removal_with_errors.ksh \ functional/removal/removal_with_export.ksh \ functional/removal/removal_with_faulted.ksh \ functional/removal/removal_with_ganging.ksh \ functional/removal/removal_with_indirect.ksh \ functional/removal/removal_with_remove.ksh \ functional/removal/removal_with_scrub.ksh \ functional/removal/removal_with_send.ksh \ functional/removal/removal_with_send_recv.ksh \ functional/removal/removal_with_snapshot.ksh \ functional/removal/removal_with_write.ksh \ functional/removal/removal_with_zdb.ksh \ functional/removal/remove_attach_mirror.ksh \ functional/removal/remove_expanded.ksh \ functional/removal/remove_indirect.ksh \ functional/removal/remove_mirror.ksh \ functional/removal/remove_mirror_sanity.ksh \ functional/removal/remove_raidz.ksh \ functional/rename_dirs/cleanup.ksh \ functional/rename_dirs/rename_dirs_001_pos.ksh \ functional/rename_dirs/setup.ksh \ functional/renameat2/cleanup.ksh \ functional/renameat2/setup.ksh \ functional/renameat2/renameat2_exchange.ksh \ functional/renameat2/renameat2_noreplace.ksh \ functional/renameat2/renameat2_whiteout.ksh \ functional/replacement/attach_import.ksh \ functional/replacement/attach_multiple.ksh \ functional/replacement/attach_rebuild.ksh \ functional/replacement/attach_resilver.ksh \ functional/replacement/cleanup.ksh \ functional/replacement/detach.ksh \ functional/replacement/rebuild_disabled_feature.ksh \ functional/replacement/rebuild_multiple.ksh \ functional/replacement/rebuild_raidz.ksh \ functional/replacement/replace_import.ksh \ functional/replacement/replace_rebuild.ksh \ functional/replacement/replace_resilver.ksh \ functional/replacement/resilver_restart_001.ksh \ functional/replacement/resilver_restart_002.ksh \ functional/replacement/scrub_cancel.ksh \ functional/replacement/setup.ksh \ functional/reservation/cleanup.ksh \ functional/reservation/reservation_001_pos.ksh \ functional/reservation/reservation_002_pos.ksh \ functional/reservation/reservation_003_pos.ksh \ functional/reservation/reservation_004_pos.ksh \ functional/reservation/reservation_005_pos.ksh \ functional/reservation/reservation_006_pos.ksh \ functional/reservation/reservation_007_pos.ksh \ functional/reservation/reservation_008_pos.ksh \ functional/reservation/reservation_009_pos.ksh \ functional/reservation/reservation_010_pos.ksh \ functional/reservation/reservation_011_pos.ksh \ functional/reservation/reservation_012_pos.ksh \ functional/reservation/reservation_013_pos.ksh \ functional/reservation/reservation_014_pos.ksh \ functional/reservation/reservation_015_pos.ksh \ functional/reservation/reservation_016_pos.ksh \ functional/reservation/reservation_017_pos.ksh \ functional/reservation/reservation_018_pos.ksh \ functional/reservation/reservation_019_pos.ksh \ functional/reservation/reservation_020_pos.ksh \ functional/reservation/reservation_021_neg.ksh \ functional/reservation/reservation_022_pos.ksh \ functional/reservation/setup.ksh \ functional/rootpool/cleanup.ksh \ functional/rootpool/rootpool_002_neg.ksh \ functional/rootpool/rootpool_003_neg.ksh \ functional/rootpool/rootpool_007_pos.ksh \ functional/rootpool/setup.ksh \ functional/rsend/cleanup.ksh \ functional/rsend/recv_dedup_encrypted_zvol.ksh \ functional/rsend/recv_dedup.ksh \ functional/rsend/rsend_001_pos.ksh \ functional/rsend/rsend_002_pos.ksh \ functional/rsend/rsend_003_pos.ksh \ functional/rsend/rsend_004_pos.ksh \ functional/rsend/rsend_005_pos.ksh \ functional/rsend/rsend_006_pos.ksh \ functional/rsend/rsend_007_pos.ksh \ functional/rsend/rsend_008_pos.ksh \ functional/rsend/rsend_009_pos.ksh \ functional/rsend/rsend_010_pos.ksh \ functional/rsend/rsend_011_pos.ksh \ functional/rsend/rsend_012_pos.ksh \ functional/rsend/rsend_013_pos.ksh \ functional/rsend/rsend_014_pos.ksh \ functional/rsend/rsend_016_neg.ksh \ functional/rsend/rsend_019_pos.ksh \ functional/rsend/rsend_020_pos.ksh \ functional/rsend/rsend_021_pos.ksh \ functional/rsend/rsend_022_pos.ksh \ functional/rsend/rsend_024_pos.ksh \ functional/rsend/rsend_025_pos.ksh \ functional/rsend/rsend_026_neg.ksh \ functional/rsend/rsend_027_pos.ksh \ functional/rsend/rsend_028_neg.ksh \ functional/rsend/rsend_029_neg.ksh \ functional/rsend/rsend_030_pos.ksh \ functional/rsend/rsend_031_pos.ksh \ functional/rsend/send-c_embedded_blocks.ksh \ functional/rsend/send-c_incremental.ksh \ functional/rsend/send-c_lz4_disabled.ksh \ functional/rsend/send-c_mixed_compression.ksh \ functional/rsend/send-c_props.ksh \ functional/rsend/send-c_recv_dedup.ksh \ functional/rsend/send-c_recv_lz4_disabled.ksh \ functional/rsend/send-c_resume.ksh \ functional/rsend/send-c_stream_size_estimate.ksh \ functional/rsend/send-c_verify_contents.ksh \ functional/rsend/send-c_verify_ratio.ksh \ functional/rsend/send-c_volume.ksh \ functional/rsend/send-c_zstream_recompress.ksh \ functional/rsend/send-c_zstreamdump.ksh \ functional/rsend/send-cpL_varied_recsize.ksh \ functional/rsend/send_doall.ksh \ functional/rsend/send_encrypted_incremental.ksh \ functional/rsend/send_encrypted_files.ksh \ functional/rsend/send_encrypted_freeobjects.ksh \ functional/rsend/send_encrypted_hierarchy.ksh \ functional/rsend/send_encrypted_props.ksh \ functional/rsend/send_encrypted_truncated_files.ksh \ functional/rsend/send_freeobjects.ksh \ functional/rsend/send_holds.ksh \ functional/rsend/send_hole_birth.ksh \ functional/rsend/send_invalid.ksh \ functional/rsend/send-L_toggle.ksh \ functional/rsend/send_mixed_raw.ksh \ functional/rsend/send_partial_dataset.ksh \ functional/rsend/send_raw_ashift.ksh \ functional/rsend/send_raw_spill_block.ksh \ functional/rsend/send_raw_large_blocks.ksh \ functional/rsend/send_realloc_dnode_size.ksh \ functional/rsend/send_realloc_encrypted_files.ksh \ functional/rsend/send_realloc_files.ksh \ functional/rsend/send_spill_block.ksh \ functional/rsend/send-wR_encrypted_zvol.ksh \ functional/rsend/setup.ksh \ functional/scrub_mirror/cleanup.ksh \ functional/scrub_mirror/scrub_mirror_001_pos.ksh \ functional/scrub_mirror/scrub_mirror_002_pos.ksh \ functional/scrub_mirror/scrub_mirror_003_pos.ksh \ functional/scrub_mirror/scrub_mirror_004_pos.ksh \ functional/scrub_mirror/setup.ksh \ functional/slog/cleanup.ksh \ functional/slog/setup.ksh \ functional/slog/slog_001_pos.ksh \ functional/slog/slog_002_pos.ksh \ functional/slog/slog_003_pos.ksh \ functional/slog/slog_004_pos.ksh \ functional/slog/slog_005_pos.ksh \ functional/slog/slog_006_pos.ksh \ functional/slog/slog_007_pos.ksh \ functional/slog/slog_008_neg.ksh \ functional/slog/slog_009_neg.ksh \ functional/slog/slog_010_neg.ksh \ functional/slog/slog_011_neg.ksh \ functional/slog/slog_012_neg.ksh \ functional/slog/slog_013_pos.ksh \ functional/slog/slog_014_pos.ksh \ functional/slog/slog_015_neg.ksh \ functional/slog/slog_016_pos.ksh \ functional/slog/slog_replay_fs_001.ksh \ functional/slog/slog_replay_fs_002.ksh \ functional/slog/slog_replay_volume.ksh \ functional/snapshot/cleanup.ksh \ functional/snapshot/clone_001_pos.ksh \ functional/snapshot/rollback_001_pos.ksh \ functional/snapshot/rollback_002_pos.ksh \ functional/snapshot/rollback_003_pos.ksh \ functional/snapshot/setup.ksh \ functional/snapshot/snapshot_001_pos.ksh \ functional/snapshot/snapshot_002_pos.ksh \ functional/snapshot/snapshot_003_pos.ksh \ functional/snapshot/snapshot_004_pos.ksh \ functional/snapshot/snapshot_005_pos.ksh \ functional/snapshot/snapshot_006_pos.ksh \ functional/snapshot/snapshot_007_pos.ksh \ functional/snapshot/snapshot_008_pos.ksh \ functional/snapshot/snapshot_009_pos.ksh \ functional/snapshot/snapshot_010_pos.ksh \ functional/snapshot/snapshot_011_pos.ksh \ functional/snapshot/snapshot_012_pos.ksh \ functional/snapshot/snapshot_013_pos.ksh \ functional/snapshot/snapshot_014_pos.ksh \ functional/snapshot/snapshot_015_pos.ksh \ functional/snapshot/snapshot_016_pos.ksh \ functional/snapshot/snapshot_017_pos.ksh \ functional/snapshot/snapshot_018_pos.ksh \ functional/snapused/cleanup.ksh \ functional/snapused/setup.ksh \ functional/snapused/snapused_001_pos.ksh \ functional/snapused/snapused_002_pos.ksh \ functional/snapused/snapused_003_pos.ksh \ functional/snapused/snapused_004_pos.ksh \ functional/snapused/snapused_005_pos.ksh \ functional/sparse/cleanup.ksh \ functional/sparse/setup.ksh \ functional/sparse/sparse_001_pos.ksh \ functional/stat/cleanup.ksh \ functional/stat/setup.ksh \ functional/stat/stat_001_pos.ksh \ functional/suid/cleanup.ksh \ functional/suid/setup.ksh \ functional/suid/suid_write_to_none.ksh \ functional/suid/suid_write_to_sgid.ksh \ functional/suid/suid_write_to_suid.ksh \ functional/suid/suid_write_to_suid_sgid.ksh \ functional/suid/suid_write_zil_replay.ksh \ functional/trim/autotrim_config.ksh \ functional/trim/autotrim_integrity.ksh \ functional/trim/autotrim_trim_integrity.ksh \ functional/trim/cleanup.ksh \ functional/trim/setup.ksh \ functional/trim/trim_config.ksh \ functional/trim/trim_integrity.ksh \ functional/trim/trim_l2arc.ksh \ functional/truncate/cleanup.ksh \ functional/truncate/setup.ksh \ functional/truncate/truncate_001_pos.ksh \ functional/truncate/truncate_002_pos.ksh \ functional/truncate/truncate_timestamps.ksh \ functional/upgrade/cleanup.ksh \ functional/upgrade/setup.ksh \ functional/upgrade/upgrade_projectquota_001_pos.ksh \ functional/upgrade/upgrade_readonly_pool.ksh \ functional/upgrade/upgrade_userobj_001_pos.ksh \ functional/user_namespace/cleanup.ksh \ functional/user_namespace/setup.ksh \ functional/user_namespace/user_namespace_001.ksh \ functional/user_namespace/user_namespace_002.ksh \ functional/user_namespace/user_namespace_003.ksh \ functional/user_namespace/user_namespace_004.ksh \ functional/userquota/cleanup.ksh \ functional/userquota/groupspace_001_pos.ksh \ functional/userquota/groupspace_002_pos.ksh \ functional/userquota/groupspace_003_pos.ksh \ functional/userquota/setup.ksh \ functional/userquota/userquota_001_pos.ksh \ functional/userquota/userquota_002_pos.ksh \ functional/userquota/userquota_003_pos.ksh \ functional/userquota/userquota_004_pos.ksh \ functional/userquota/userquota_005_neg.ksh \ functional/userquota/userquota_006_pos.ksh \ functional/userquota/userquota_007_pos.ksh \ functional/userquota/userquota_008_pos.ksh \ functional/userquota/userquota_009_pos.ksh \ functional/userquota/userquota_010_pos.ksh \ functional/userquota/userquota_011_pos.ksh \ functional/userquota/userquota_012_neg.ksh \ functional/userquota/userquota_013_pos.ksh \ functional/userquota/userspace_001_pos.ksh \ functional/userquota/userspace_002_pos.ksh \ functional/userquota/userspace_003_pos.ksh \ functional/userquota/userspace_encrypted.ksh \ functional/userquota/userspace_send_encrypted.ksh \ functional/userquota/userspace_encrypted_13709.ksh \ functional/vdev_zaps/cleanup.ksh \ functional/vdev_zaps/setup.ksh \ functional/vdev_zaps/vdev_zaps_001_pos.ksh \ functional/vdev_zaps/vdev_zaps_002_pos.ksh \ functional/vdev_zaps/vdev_zaps_003_pos.ksh \ functional/vdev_zaps/vdev_zaps_004_pos.ksh \ functional/vdev_zaps/vdev_zaps_005_pos.ksh \ functional/vdev_zaps/vdev_zaps_006_pos.ksh \ functional/vdev_zaps/vdev_zaps_007_pos.ksh \ functional/write_dirs/cleanup.ksh \ functional/write_dirs/setup.ksh \ functional/write_dirs/write_dirs_001_pos.ksh \ functional/write_dirs/write_dirs_002_pos.ksh \ functional/xattr/cleanup.ksh \ functional/xattr/setup.ksh \ functional/xattr/xattr_001_pos.ksh \ functional/xattr/xattr_002_neg.ksh \ functional/xattr/xattr_003_neg.ksh \ functional/xattr/xattr_004_pos.ksh \ functional/xattr/xattr_005_pos.ksh \ functional/xattr/xattr_006_pos.ksh \ functional/xattr/xattr_007_neg.ksh \ functional/xattr/xattr_008_pos.ksh \ functional/xattr/xattr_009_neg.ksh \ functional/xattr/xattr_010_neg.ksh \ functional/xattr/xattr_011_pos.ksh \ functional/xattr/xattr_012_pos.ksh \ functional/xattr/xattr_013_pos.ksh \ functional/xattr/xattr_compat.ksh \ functional/zpool_influxdb/cleanup.ksh \ functional/zpool_influxdb/setup.ksh \ functional/zpool_influxdb/zpool_influxdb.ksh \ functional/zvol/zvol_cli/cleanup.ksh \ functional/zvol/zvol_cli/setup.ksh \ functional/zvol/zvol_cli/zvol_cli_001_pos.ksh \ functional/zvol/zvol_cli/zvol_cli_002_pos.ksh \ functional/zvol/zvol_cli/zvol_cli_003_neg.ksh \ functional/zvol/zvol_ENOSPC/cleanup.ksh \ functional/zvol/zvol_ENOSPC/setup.ksh \ functional/zvol/zvol_ENOSPC/zvol_ENOSPC_001_pos.ksh \ functional/zvol/zvol_misc/cleanup.ksh \ functional/zvol/zvol_misc/setup.ksh \ functional/zvol/zvol_misc/zvol_misc_001_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_002_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_003_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_004_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_005_neg.ksh \ functional/zvol/zvol_misc/zvol_misc_006_pos.ksh \ functional/zvol/zvol_misc/zvol_misc_fua.ksh \ functional/zvol/zvol_misc/zvol_misc_hierarchy.ksh \ functional/zvol/zvol_misc/zvol_misc_rename_inuse.ksh \ functional/zvol/zvol_misc/zvol_misc_snapdev.ksh \ functional/zvol/zvol_misc/zvol_misc_trim.ksh \ functional/zvol/zvol_misc/zvol_misc_volmode.ksh \ functional/zvol/zvol_misc/zvol_misc_zil.ksh \ functional/zvol/zvol_stress/cleanup.ksh \ functional/zvol/zvol_stress/setup.ksh \ functional/zvol/zvol_stress/zvol_stress.ksh \ functional/zvol/zvol_swap/cleanup.ksh \ functional/zvol/zvol_swap/setup.ksh \ functional/zvol/zvol_swap/zvol_swap_001_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_002_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_003_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_004_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_005_pos.ksh \ functional/zvol/zvol_swap/zvol_swap_006_pos.ksh \ functional/idmap_mount/cleanup.ksh \ functional/idmap_mount/setup.ksh \ functional/idmap_mount/idmap_mount_001.ksh \ functional/idmap_mount/idmap_mount_002.ksh \ functional/idmap_mount/idmap_mount_003.ksh \ functional/idmap_mount/idmap_mount_004.ksh \ functional/idmap_mount/idmap_mount_005.ksh diff --git a/tests/zfs-tests/tests/functional/fault/auto_replace_001_pos.ksh b/tests/zfs-tests/tests/functional/fault/auto_replace_001_pos.ksh index 081e6c18430d..ae56ee9919bf 100755 --- a/tests/zfs-tests/tests/functional/fault/auto_replace_001_pos.ksh +++ b/tests/zfs-tests/tests/functional/fault/auto_replace_001_pos.ksh @@ -1,109 +1,140 @@ #!/bin/ksh -p # # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License (the "License"). # You may not use this file except in compliance with the License. # # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE # or https://opensource.org/licenses/CDDL-1.0. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at usr/src/OPENSOLARIS.LICENSE. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright (c) 2017 by Intel Corporation. All rights reserved. # . $STF_SUITE/include/libtest.shlib . $STF_SUITE/tests/functional/fault/fault.cfg # # DESCRIPTION: # Testing Fault Management Agent ZED Logic - Automated Auto-Replace Test. # # STRATEGY: # 1. Update /etc/zfs/vdev_id.conf with scsidebug alias for a persistent path. # This creates keys ID_VDEV and ID_VDEV_PATH and set phys_path="scsidebug". # 2. Create a pool and set autoreplace=on (auto-replace is opt-in) -# 3. Export a pool +# 3. Export the pool # 4. Wipe and offline the scsi_debug disk -# 5. Import pool with missing disk +# 5. Import the pool with missing disk # 6. Re-online the wiped scsi_debug disk -# 7. Verify the ZED detects the new unused disk and adds it back to the pool +# 7. Verify ZED detects the new blank disk and replaces the missing vdev +# 8. Verify that the scsi_debug disk was re-partitioned # -# Creates a raidz1 zpool using persistent disk path names +# Creates a raidz1 zpool using persistent /dev/disk/by-vdev path names # (ie not /dev/sdc) # # Auto-replace is opt in, and matches by phys_path. # verify_runnable "both" if ! is_physical_device $DISKS; then log_unsupported "Unsupported disks for this test." fi function cleanup { zpool status $TESTPOOL destroy_pool $TESTPOOL sed -i '/alias scsidebug/d' $VDEVID_CONF unload_scsi_debug } log_assert "Testing automated auto-replace FMA test" log_onexit cleanup load_scsi_debug $SDSIZE $SDHOSTS $SDTGTS $SDLUNS '512b' SD=$(get_debug_device) SD_DEVICE_ID=$(get_persistent_disk_name $SD) SD_HOST=$(get_scsi_host $SD) # Register vdev_id alias for scsi_debug device to create a persistent path echo "alias scsidebug /dev/disk/by-id/$SD_DEVICE_ID" >>$VDEVID_CONF block_device_wait SD_DEVICE=$(udevadm info -q all -n $DEV_DSKDIR/$SD | \ awk -F'=' '/ID_VDEV=/ {print $2; exit}') [ -z $SD_DEVICE ] && log_fail "vdev rule was not registered properly" log_must zpool events -c log_must zpool create -f $TESTPOOL raidz1 $SD_DEVICE $DISK1 $DISK2 $DISK3 # Auto-replace is opt-in so need to set property log_must zpool set autoreplace=on $TESTPOOL # Add some data to the pool -log_must mkfile $FSIZE /$TESTPOOL/data +log_must zfs create $TESTPOOL/fs +log_must fill_fs /$TESTPOOL/fs 4 100 4096 512 Z log_must zpool export $TESTPOOL +# Record the partition UUID for later comparison +part_uuid=$(udevadm info --query=property --property=ID_PART_TABLE_UUID \ + --value /dev/disk/by-id/$SD_DEVICE_ID) +[[ -z "$part_uuid" ]] || log_note original disk GPT uuid ${part_uuid} + +# # Wipe and offline the disk +# +# Note that it is not enough to zero the disk to expunge the partitions. +# You also need to inform the kernel (e.g., 'hdparm -z' or 'partprobe'). +# +# Using partprobe is overkill and hdparm is not as common as wipefs. So +# we use wipefs which lets the kernel know the partition was removed +# from the device (i.e., calls BLKRRPART ioctl). +# log_must dd if=/dev/zero of=/dev/disk/by-id/$SD_DEVICE_ID bs=1M count=$SDSIZE +log_must /usr/sbin/wipefs -a /dev/disk/by-id/$SD_DEVICE_ID remove_disk $SD block_device_wait # Re-import pool with drive missing log_must zpool import $TESTPOOL log_must check_state $TESTPOOL "" "DEGRADED" block_device_wait # Online an empty disk in the same physical location insert_disk $SD $SD_HOST # Wait for the new disk to be online and replaced log_must wait_vdev_state $TESTPOOL "scsidebug" "ONLINE" 60 log_must wait_replacing $TESTPOOL 60 # Validate auto-replace was successful log_must check_state $TESTPOOL "" "ONLINE" +# +# Confirm the partition UUID changed so we know the new disk was relabeled +# +# Note: some older versions of udevadm don't support "--property" option so +# we'll # skip this test when it is not supported +# +if [ ! -z "$part_uuid" ]; then + new_uuid=$(udevadm info --query=property --property=ID_PART_TABLE_UUID \ + --value /dev/disk/by-id/$SD_DEVICE_ID) + log_note new disk GPT uuid ${new_uuid} + [[ "$part_uuid" = "$new_uuid" ]] && \ + log_fail "The new disk was not relabeled as expected" +fi + log_pass "Auto-replace test successful" diff --git a/tests/zfs-tests/tests/functional/fault/auto_replace_002_pos.ksh b/tests/zfs-tests/tests/functional/fault/auto_replace_002_pos.ksh new file mode 100755 index 000000000000..2259e604317b --- /dev/null +++ b/tests/zfs-tests/tests/functional/fault/auto_replace_002_pos.ksh @@ -0,0 +1,192 @@ +#!/bin/ksh -p +# +# CDDL HEADER START +# +# The contents of this file are subject to the terms of the +# Common Development and Distribution License (the "License"). +# You may not use this file except in compliance with the License. +# +# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE +# or https://opensource.org/licenses/CDDL-1.0. +# See the License for the specific language governing permissions +# and limitations under the License. +# +# When distributing Covered Code, include this CDDL HEADER in each +# file and include the License file at usr/src/OPENSOLARIS.LICENSE. +# If applicable, add the following below this CDDL HEADER, with the +# fields enclosed by brackets "[]" replaced with your own identifying +# information: Portions Copyright [yyyy] [name of copyright owner] +# +# CDDL HEADER END +# +# +# Copyright (c) 2017 by Intel Corporation. All rights reserved. +# Copyright (c) 2023 by Klara, Inc. All rights reserved. +# + +. $STF_SUITE/include/libtest.shlib +. $STF_SUITE/tests/functional/fault/fault.cfg + +# +# DESCRIPTION: +# Testing Fault Management Agent ZED Logic - Automated Auto-Replace Test. +# Verifys that auto-replace works with by-id paths. +# +# STRATEGY: +# 1. Update /etc/zfs/vdev_id.conf with scsidebug alias for a persistent path. +# This creates keys ID_VDEV and ID_VDEV_PATH and set phys_path="scsidebug". +# 2. Create a pool and set autoreplace=on (auto-replace is opt-in) +# 3. Export the pool +# 4. Wipe and offline the scsi_debug disk +# 5. Import the pool with missing disk +# 6. Re-online the wiped scsi_debug disk with a new serial number +# 7. Verify ZED detects the new blank disk and replaces the missing vdev +# 8. Verify that the scsi_debug disk was re-partitioned +# +# Creates a raidz1 zpool using persistent /dev/disk/by-id path names +# +# Auto-replace is opt in, and matches by phys_path. +# + +verify_runnable "both" + +if ! is_physical_device $DISKS; then + log_unsupported "Unsupported disks for this test." +fi + +function cleanup +{ + zpool status $TESTPOOL + destroy_pool $TESTPOOL + sed -i '/alias scsidebug/d' $VDEVID_CONF + unload_scsi_debug +} + +# +# Wait until a vdev transitions to its replacement vdev +# +# Return 0 when vdev reaches expected state, 1 on timeout. +# +# Note: index +2 is to skip over root and raidz-0 vdevs +# +function wait_vdev_online # pool index oldguid timeout +{ + typeset pool=$1 + typeset -i index=$2+2 + typeset guid=$3 + typeset timeout=${4:-60} + typeset -i i=0 + + while [[ $i -lt $timeout ]]; do + vdev_guids=( $(zpool get -H -o value guid $pool all-vdevs) ) + + if [ "${vdev_guids[$index]}" != "${guid}" ]; then + log_note "new vdev[$((index-2))]: ${vdev_guids[$index]}, replacing ${guid}" + return 0 + fi + + i=$((i+1)) + sleep 1 + done + + return 1 +} +log_assert "automated auto-replace with by-id paths" +log_onexit cleanup + +load_scsi_debug $SDSIZE $SDHOSTS $SDTGTS $SDLUNS '512b' +SD=$(get_debug_device) +SD_DEVICE_ID=$(get_persistent_disk_name $SD) +SD_HOST=$(get_scsi_host $SD) + +# Register vdev_id alias for scsi_debug device to create a persistent path +echo "alias scsidebug /dev/disk/by-id/$SD_DEVICE_ID" >>$VDEVID_CONF +block_device_wait + +SD_DEVICE=$(udevadm info -q all -n $DEV_DSKDIR/$SD | \ + awk -F'=' '/ID_VDEV=/ {print $2; exit}') +[ -z $SD_DEVICE ] && log_fail "vdev rule was not registered properly" + +log_must zpool events -c +log_must zpool create -f $TESTPOOL raidz1 $SD_DEVICE_ID $DISK1 $DISK2 $DISK3 + +vdev_guid=$(zpool get guid -H -o value $TESTPOOL $SD_DEVICE_ID) +log_note original vdev guid ${vdev_guid} + +# Auto-replace is opt-in so need to set property +log_must zpool set autoreplace=on $TESTPOOL + +# Add some data to the pool +log_must zfs create $TESTPOOL/fs +log_must fill_fs /$TESTPOOL/fs 4 100 4096 512 Z +log_must zpool export $TESTPOOL + +# Record the partition UUID for later comparison +part_uuid=$(udevadm info --query=property --property=ID_PART_TABLE_UUID \ + --value /dev/disk/by-id/$SD_DEVICE_ID) +[[ -z "$part_uuid" ]] || log_note original disk GPT uuid ${part_uuid} + +# +# Wipe and offline the disk +# +# Note that it is not enough to zero the disk to expunge the partitions. +# You also need to inform the kernel (e.g., 'hdparm -z' or 'partprobe'). +# +# Using partprobe is overkill and hdparm is not as common as wipefs. So +# we use wipefs which lets the kernel know the partition was removed +# from the device (i.e., calls BLKRRPART ioctl). +# +log_must dd if=/dev/zero of=/dev/disk/by-id/$SD_DEVICE_ID bs=1M count=$SDSIZE +log_must /usr/sbin/wipefs -a /dev/disk/by-id/$SD_DEVICE_ID +remove_disk $SD +block_device_wait + +# Re-import pool with drive missing +log_must zpool import $TESTPOOL +log_must check_state $TESTPOOL "" "DEGRADED" +block_device_wait + +# +# Online an empty disk in the same physical location, with a different by-id +# symlink. We use vpd_use_hostno to make sure the underlying serial number +# changes for the new disk which in turn gives us a different by-id path. +# +# The original names were something like: +# /dev/disk/by-id/scsi-SLinux_scsi_debug_16000-part1 +# /dev/disk/by-id/wwn-0x33333330000007d0-part1 +# +# This new inserted disk, will have different links like: +# /dev/disk/by-id/scsi-SLinux_scsi_debug_2000-part1 +# /dev/disk/by-id/wwn-0x0x3333333000003e80 -part1 +# +echo '0' > /sys/bus/pseudo/drivers/scsi_debug/vpd_use_hostno + +insert_disk $SD $SD_HOST + +# make sure the physical path points to the same scsi-debug device +SD_DEVICE_ID=$(get_persistent_disk_name $SD) +echo "alias scsidebug /dev/disk/by-id/$SD_DEVICE_ID" >>$VDEVID_CONF +block_device_wait + +# Wait for the new disk to be online and replaced +log_must wait_vdev_online $TESTPOOL 0 $vdev_guid 45 +log_must wait_replacing $TESTPOOL 45 + +# Validate auto-replace was successful +log_must check_state $TESTPOOL "" "ONLINE" + +# +# Confirm the partition UUID changed so we know the new disk was relabeled +# +# Note: some older versions of udevadm don't support "--property" option so +# we'll # skip this test when it is not supported +# +if [ ! -z "$part_uuid" ]; then + new_uuid=$(udevadm info --query=property --property=ID_PART_TABLE_UUID \ + --value /dev/disk/by-id/$SD_DEVICE_ID) + log_note new disk GPT uuid ${new_uuid} + [[ "$part_uuid" = "$new_uuid" ]] && \ + log_fail "The new disk was not relabeled as expected" +fi + +log_pass "automated auto-replace with by-id paths"