diff --git a/usr.sbin/bsdinstall/scripts/auto b/usr.sbin/bsdinstall/scripts/auto
index 9f4b5b52fe5d..c651d654d62e 100755
--- a/usr.sbin/bsdinstall/scripts/auto
+++ b/usr.sbin/bsdinstall/scripts/auto
@@ -1,404 +1,380 @@
 #!/bin/sh
 #-
 # Copyright (c) 2011 Nathan Whitehorn
 # Copyright (c) 2013-2018 Devin Teske
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
 # are met:
 # 1. Redistributions of source code must retain the above copyright
 #    notice, this list of conditions and the following disclaimer.
 # 2. Redistributions in binary form must reproduce the above copyright
 #    notice, this list of conditions and the following disclaimer in the
 #    documentation and/or other materials provided with the distribution.
 #
 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 # SUCH DAMAGE.
 #
 #
 ############################################################ INCLUDES
 
 BSDCFG_SHARE="/usr/share/bsdconfig"
 . $BSDCFG_SHARE/common.subr || exit 1
 f_include $BSDCFG_SHARE/dialog.subr
 
 ############################################################ GLOBALS
 
 #
 # Strings that should be moved to an i18n file and loaded with f_include_lang()
 #
 hline_arrows_tab_enter="Press arrows, TAB or ENTER"
 hline_arrows_tab_space_enter="Press arrows, TAB, SPACE or ENTER"
 msg_abort="Abort"
 msg_an_installation_step_has_been_aborted="An installation step has been aborted. Would you like\nto restart the installation or exit the installer?"
 msg_auto_ufs="Auto (UFS)"
 msg_auto_ufs_desc="Guided UFS Disk Setup"
 msg_auto_ufs_help="Menu options help choose which disk to setup using UFS and standard partitions"
 msg_auto_zfs="Auto (ZFS)"
 msg_auto_zfs_desc="Guided Root-on-ZFS"
 msg_auto_zfs_help="To use ZFS with less than 8GB RAM, see https://wiki.freebsd.org/ZFSTuningGuide"
 msg_exit="Exit"
 msg_freebsd_installer="$OSNAME Installer"
 msg_gpt_active_fix="Your hardware is known to have issues booting in CSM/Legacy/BIOS mode from GPT partitions that are not set active. Would you like the installer to apply this workaround for you?"
 msg_lenovo_fix="Your model of Lenovo is known to have a BIOS bug that prevents it booting from GPT partitions without UEFI. Would you like the installer to apply a workaround for you?"
 msg_manual="Manual"
 msg_manual_desc="Manual Disk Setup (experts)"
 msg_manual_help="Create customized partitions from menu options"
 msg_no="NO"
 msg_restart="Restart"
 msg_shell="Shell"
 msg_shell_desc="Open a shell and partition by hand"
 msg_shell_help="Create customized partitions using command-line utilities"
 msg_yes="YES"
 
 ############################################################ FUNCTIONS
 
 # error [$msg]
 #
 # Display generic error message when a script fails. An optional message
 # argument can preceed the generic message. User is given the choice of
 # restarting the installer or exiting.
 #
 error()
 {
 	local title="$msg_abort"
 	local btitle="$msg_freebsd_installer"
 	local prompt="${1:+$1\n\n}$msg_an_installation_step_has_been_aborted"
 	local hline="$hline_arrows_tab_space_enter"
 
 	[ -f "$PATH_FSTAB" ] && bsdinstall umount
 
 	local height width
 	f_dialog_buttonbox_size height width \
 		"$title" "$btitle" "$prompt" "$hline"
 
 	if $DIALOG \
 		--title "$title"           \
 		--backtitle "$btitle"      \
 		--hline "$hline"           \
 		--no-label "$msg_exit"     \
 		--yes-label "$msg_restart" \
 		--yesno "$prompt" $height $width
 	then
 		exec $0
 		# NOTREACHED
 	fi
 	exit 1
 }
 
 # dialog_workaround
 #
 # Ask the user if they wish to apply a workaround
 #
 dialog_workaround()
 {
 	local passed_msg="$1"
 	local title="$DIALOG_TITLE"
 	local btitle="$DIALOG_BACKTITLE"
 	local prompt # Calculated below
 	local hline="$hline_arrows_tab_enter"
 
 	local height=8 width=50 prefix="   "
 	local plen=${#prefix} list= line=
 	local max_width=$(( $width - 3 - $plen ))
 
 	local yes no defaultno extra_args format
 	if [ "$USE_XDIALOG" ]; then
 		yes=ok no=cancel defaultno=default-no
 		extra_args="--wrap --left"
 		format="$passed_msg"
 	else
 		yes=yes no=no defaultno=defaultno
 		extra_args="--cr-wrap"
 		format="$passed_msg"
 	fi
 
 	# Add height for Xdialog(1)
 	[ "$USE_XDIALOG" ] && height=$(( $height + $height / 5 + 3 ))
 
 	prompt=$( printf "$format" )
 	f_dprintf "%s: Workaround prompt" "$0"
 	$DIALOG \
 		--title "$title"        \
 		--backtitle "$btitle"   \
 		--hline "$hline"        \
 		--$yes-label "$msg_yes" \
 		--$no-label "$msg_no"   \
 		$extra_args             \
 		--yesno "$prompt" $height $width
 }
 
 ############################################################ MAIN
 
 f_dprintf "Began Installation at %s" "$( date )"
 
 rm -rf $BSDINSTALL_TMPETC
 mkdir $BSDINSTALL_TMPETC
 
 [ -f /usr/libexec/bsdinstall/local.pre-everything ] && f_dprintf "Running local.pre-everything" && sh /usr/libexec/bsdinstall/local.pre-everything "$BSDINSTALL_CHROOT"
 
 trap true SIGINT	# This section is optional
 [ -z "$BSDINSTALL_SKIP_KEYMAP" ] && bsdinstall keymap
 
 trap error SIGINT	# Catch cntrl-C here
 if [ -z "$BSDINSTALL_SKIP_HOSTNAME" ]; then bsdinstall hostname || error "Set hostname failed"; fi
 
-export DISTRIBUTIONS="${DISTRIBUTIONS:-base.txz kernel.txz}"
-if [ -f $BSDINSTALL_DISTDIR/MANIFEST ]; then
-	DISTMENU=`awk -F'\t' '!/^(kernel\.txz|base\.txz)/{print $1,$5,$6}' $BSDINSTALL_DISTDIR/MANIFEST`
-	DISTMENU="$(echo ${DISTMENU} | sed -E 's/\.txz//g')"
-
-	if [ -n "$DISTMENU" ]; then
-		exec 5>&1
-		EXTRA_DISTS=$( eval bsddialog \
-		    --backtitle \"$OSNAME Installer\" \
-		    --title \"Distribution Select\" --nocancel --separate-output \
-		    --checklist \"Choose optional system components to install:\" \
-		    0 0 0 $DISTMENU \
-		2>&1 1>&5 )
-		for dist in $EXTRA_DISTS; do
-			export DISTRIBUTIONS="$DISTRIBUTIONS $dist.txz"
-		done
-	fi
-fi
-
-FETCH_DISTRIBUTIONS=""
-for dist in $DISTRIBUTIONS; do
-	if [ ! -f $BSDINSTALL_DISTDIR/$dist ]; then
-		FETCH_DISTRIBUTIONS="$FETCH_DISTRIBUTIONS $dist"
-	fi
-done
-
-if [ -n "$FETCH_DISTRIBUTIONS" -a -n "$BSDINSTALL_CONFIGCURRENT" ]; then
-	bsddialog --backtitle "$OSNAME Installer" --title "Network Installation" --msgbox "Some installation files were not found on the boot volume. The next few screens will allow you to configure networking so that they can be downloaded from the Internet." 0 0
-	bsdinstall netconfig || error
-	NETCONFIG_DONE=yes
+if [ -n "$BSDINSTALL_USE_DISTRIBUTIONS" ]; then
+	exec 5>&1
+	export DISTRIBUTIONS=$( `dirname $0`/selectdists 2>&1 1>&5 )
+	exec 5>&-
 fi
 
 rm -f $PATH_FSTAB
 touch $PATH_FSTAB
 
 [ -f /usr/libexec/bsdinstall/local.pre-partition ] && f_dprintf "Running local.pre-partition" && sh /usr/libexec/bsdinstall/local.pre-partition "$BSDINSTALL_CHROOT"
 
 #
 # Try to detect known broken platforms and apply their workarounds
 #
 
 if f_interactive; then
 	sys_maker=$( kenv -q smbios.system.maker )
 	f_dprintf "smbios.system.maker=[%s]" "$sys_maker"
 	sys_model=$( kenv -q smbios.system.product )
 	f_dprintf "smbios.system.product=[%s]" "$sys_model"
 	sys_version=$( kenv -q smbios.system.version )
 	f_dprintf "smbios.system.version=[%s]" "$sys_version"
 	sys_mb_maker=$( kenv -q smbios.planar.maker )
 	f_dprintf "smbios.planar.maker=[%s]" "$sys_mb_maker"
 	sys_mb_product=$( kenv -q smbios.planar.product )
 	f_dprintf "smbios.planar.product=[%s]" "$sys_mb_product"
 
 	#
 	# Laptop Models
 	#
 	case "$sys_maker" in
 	"LENOVO")
 		case "$sys_version" in
 		"ThinkPad X220"|"ThinkPad T420"|"ThinkPad T520"|"ThinkPad W520"|"ThinkPad X1")
 			dialog_workaround "$msg_lenovo_fix"
 			retval=$?
 			f_dprintf "lenovofix_prompt=[%s]" "$retval"
 			if [ $retval -eq $DIALOG_OK ]; then
 				export ZFSBOOT_PARTITION_SCHEME="GPT + Lenovo Fix"
 				export WORKAROUND_LENOVO=1
 			fi
 			;;
 		esac
 		;;
 	"Dell Inc.")
 		case "$sys_model" in
 		"Latitude E6330"|"Latitude E7440"|"Latitude E7240"|"Precision Tower 5810")
 			dialog_workaround "$msg_gpt_active_fix"
 			retval=$?
 			f_dprintf "gpt_active_fix_prompt=[%s]" "$retval"
 			if [ $retval -eq $DIALOG_OK ]; then
 				export ZFSBOOT_PARTITION_SCHEME="GPT + Active"
 				export WORKAROUND_GPTACTIVE=1
 			fi
 			;;
 		esac
 		;;
 	"Hewlett-Packard")
 		case "$sys_model" in
 		"HP ProBook 4330s")
 			dialog_workaround "$msg_gpt_active_fix"
 			retval=$?
 			f_dprintf "gpt_active_fix_prompt=[%s]" "$retval"
 			if [ $retval -eq $DIALOG_OK ]; then
 				export ZFSBOOT_PARTITION_SCHEME="GPT + Active"
 				export WORKAROUND_GPTACTIVE=1
 			fi
 			;;
 		esac
 		;;
 	esac
 	#
 	# Motherboard Models
 	#
 	case "$sys_mb_maker" in
 	"Intel Corporation")
 		case "$sys_mb_product" in
 		"DP965LT"|"D510MO")
 			dialog_workaround "$msg_gpt_active_fix"
 			retval=$?
 			f_dprintf "gpt_active_fix_prompt=[%s]" "$retval"
 			if [ $retval -eq $DIALOG_OK ]; then
 				export ZFSBOOT_PARTITION_SCHEME="GPT + Active"
 				export WORKAROUND_GPTACTIVE=1
 			fi
 			;;
 		esac
 		;;
 	"Acer")
 		case "$sys_mb_product" in
 		"Veriton M6630G")
 			dialog_workaround "$msg_gpt_active_fix"
 			retval=$?
 			f_dprintf "gpt_active_fix_prompt=[%s]" "$retval"
 			if [ $retval -eq $DIALOG_OK ]; then
 				export ZFSBOOT_PARTITION_SCHEME="GPT + Active"
 				export WORKAROUND_GPTACTIVE=1
 			fi
 			;;
 		esac
 		;;
 	esac
 fi
 
 PMODES="
 	'$msg_auto_ufs' '$msg_auto_ufs_desc' '$msg_auto_ufs_help'
 	'$msg_manual' '$msg_manual_desc' '$msg_manual_help'
 	'$msg_shell' '$msg_shell_desc' '$msg_shell_help'
 " # END-QUOTE
 
 CURARCH=$( uname -m )
 case $CURARCH in
 	amd64|arm64|i386|riscv)	# Booting ZFS Supported
 		PMODES="
 			'$msg_auto_zfs' '$msg_auto_zfs_desc' '$msg_auto_zfs_help'
 			$PMODES
 		" # END-QUOTE
 		;;
 	*)			# Booting ZFS Unsupported
 		;;
 esac
 
 exec 5>&1
 PARTMODE=`echo $PMODES | xargs -o bsddialog --backtitle "$OSNAME Installer" \
 	--title "Partitioning" \
 	--item-help \
 	--menu "How would you like to partition your disk?" \
 	0 0 0 2>&1 1>&5` || exit 1
 exec 5>&-
 
 case "$PARTMODE" in
 "$msg_auto_zfs")	# ZFS
 	bsdinstall zfsboot || error "ZFS setup failed"
 	bsdinstall mount || error "Failed to mount filesystem"
 	;;
 "$msg_auto_ufs")	# Guided UFS
 	bsdinstall autopart || error "Partitioning error"
 	bsdinstall mount || error "Failed to mount filesystem"
 	;;
 "$msg_shell")		# Shell
 	clear
 	echo "Use this shell to set up partitions for the new system. When finished, mount the system at $BSDINSTALL_CHROOT and place an fstab file for the new system at $PATH_FSTAB. Then type 'exit'. You can also enter the partition editor at any time by entering 'bsdinstall partedit'."
 	sh 2>&1
 	;;
 "$msg_manual")		# Manual
 	if f_isset debugFile; then
 		# Give partedit the path to our logfile so it can append
 		BSDINSTALL_LOG="${debugFile#+}" bsdinstall partedit || error "Partitioning error"
 	else
 		bsdinstall partedit || error "Partitioning error"
 	fi
 	bsdinstall mount || error "Failed to mount filesystem"
 	;;
 *)
 	error "Unknown partitioning mode"
 	;;
 esac
 
 [ -f /usr/libexec/bsdinstall/local.pre-fetch ] && f_dprintf "Running local.pre-fetch" && sh /usr/libexec/bsdinstall/local.pre-fetch "$BSDINSTALL_CHROOT"
 
 if [ -n "$FETCH_DISTRIBUTIONS" ]; then
 	exec 5>&1
 	export BSDINSTALL_DISTDIR=$(`dirname $0`/fetchmissingdists 2>&1 1>&5)
 	FETCH_RESULT=$?
 	exec 5>&-
 
 	[ $FETCH_RESULT -ne 0 ] && error "Could not fetch remote distributions"
 fi
-bsdinstall checksum || error "Distribution checksum failed"
-bsdinstall distextract || error "Distribution extract failed"
+if [ -n "$BSDINSTALL_USE_DISTRIBUTIONS" ]; then
+	bsdinstall checksum || error "Distribution checksum failed"
+	bsdinstall distextract || error "Distribution extract failed"
+fi
 
 # Set up boot loader
 bsdinstall bootconfig || error "Failed to configure bootloader"
 
 [ -f /usr/libexec/bsdinstall/local.pre-configure ] && f_dprintf "Running local.pre-configure" && sh /usr/libexec/bsdinstall/local.pre-configure "$BSDINSTALL_CHROOT"
 
 bsdinstall rootpass || error "Could not set root password"
 
 trap true SIGINT	# This section is optional
 if [ "$NETCONFIG_DONE" != yes ]; then
 	bsdinstall netconfig	# Don't check for errors -- the user may cancel
 fi
 [ -z "$BSDINSTALL_SKIP_TIME" ] && bsdinstall time
 [ -z "$BSDINSTALL_SKIP_SERVICES" ] && bsdinstall services
 [ -z "$BSDINSTALL_SKIP_HARDENING" ] && bsdinstall hardening
 
 [ -z "$BSDINSTALL_SKIP_USERS" ] && bsddialog --backtitle "$OSNAME Installer" \
 	--title "Add User Accounts" --yesno \
     "Would you like to add users to the installed system now?" 0 0 && \
     bsdinstall adduser
 
 # Allow user to change his mind
 [ -z "$BSDINSTALL_SKIP_FINALCONFIG" ] && bsdinstall finalconfig
 
 trap error SIGINT	# SIGINT is bad again
 bsdinstall config  || error "Failed to save config"
 
 if [ ! -z "$BSDINSTALL_FETCHDEST" ]; then
 	rm -rf "$BSDINSTALL_FETCHDEST"
 fi
 
 [ -f /usr/libexec/bsdinstall/local.post-configure ] && f_dprintf "Running local.post-configure" && sh /usr/libexec/bsdinstall/local.post-configure "$BSDINSTALL_CHROOT"
 
 if [ -z "$BSDINSTALL_SKIP_MANUAL" ]; then
 	bsddialog --backtitle "$OSNAME Installer" --title "Manual Configuration" \
 		--default-no --yesno \
 		"The installation is now finished. Before exiting the installer, would you like to open a shell in the new system to make any final manual modifications?" 0 0
 	if [ $? -eq 0 ]; then
 		clear
 		echo This shell is operating in a chroot in the new system. \
 		    When finished making configuration changes, type \"exit\".
 		chroot "$BSDINSTALL_CHROOT" /bin/sh 2>&1
 	fi
 fi
 
 bsdinstall entropy
 bsdinstall umount
 
 f_dprintf "Installation Completed at %s" "$( date )"
 
 ################################################################################
 # END
 ################################################################################
diff --git a/usr.sbin/bsdinstall/scripts/selectdists b/usr.sbin/bsdinstall/scripts/selectdists
new file mode 100644
index 000000000000..b548e82a95f8
--- /dev/null
+++ b/usr.sbin/bsdinstall/scripts/selectdists
@@ -0,0 +1,73 @@
+#!/bin/sh
+#-
+# Copyright (c) 2011 Nathan Whitehorn
+# Copyright (c) 2013-2018 Devin Teske
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+#
+############################################################ INCLUDES
+
+BSDCFG_SHARE="/usr/share/bsdconfig"
+. $BSDCFG_SHARE/common.subr || exit 1
+
+############################################################ CONFIGURATION
+
+#
+# Default distributions
+#
+DISTRIBUTIONS="${DISTRIBUTIONS:-base.txz kernel.txz}"
+
+############################################################ MAIN
+
+if [ -f $BSDINSTALL_DISTDIR/MANIFEST ]; then
+	DISTMENU=`awk -F'\t' '!/^(kernel\.txz|base\.txz)/{print $1,$5,$6}' $BSDINSTALL_DISTDIR/MANIFEST`
+	DISTMENU="$(echo ${DISTMENU} | sed -E 's/\.txz//g')"
+
+	if [ -n "$DISTMENU" ]; then
+		EXTRA_DISTS=$( eval bsddialog \
+			--backtitle \"$OSNAME Installer\" \
+			--title \"Distribution Select\" --nocancel --separate-output \
+			--checklist \"Choose optional system components to install:\" \
+			0 0 0 $DISTMENU \
+			2>&1 >&3 )
+		for dist in $EXTRA_DISTS; do
+			DISTRIBUTIONS="$DISTRIBUTIONS $dist.txz"
+		done
+	fi
+fi
+
+FETCH_DISTRIBUTIONS=""
+for dist in $DISTRIBUTIONS; do
+	if [ ! -f $BSDINSTALL_DISTDIR/$dist ]; then
+		FETCH_DISTRIBUTIONS="$FETCH_DISTRIBUTIONS $dist"
+	fi
+done
+
+if [ -n "$FETCH_DISTRIBUTIONS" -a -n "$BSDINSTALL_CONFIGCURRENT" ]; then
+	bsddialog --backtitle "$OSNAME Installer" --title "Network Installation" --msgbox "Some installation files were not found on the boot volume. The next few screens will allow you to configure networking so that they can be downloaded from the Internet." 0 0
+	bsdinstall netconfig || error
+	NETCONFIG_DONE=yes
+fi
+
+echo $DISTRIBUTIONS >&2
diff --git a/usr.sbin/bsdinstall/startbsdinstall b/usr.sbin/bsdinstall/startbsdinstall
index 63239c969ac6..8d9fb981c11d 100644
--- a/usr.sbin/bsdinstall/startbsdinstall
+++ b/usr.sbin/bsdinstall/startbsdinstall
@@ -1,111 +1,112 @@
 #!/bin/sh
 
 : ${BSDDIALOG_OK=0}
 : ${BSDDIALOG_CANCEL=1}
 : ${BSDDIALOG_HELP=2}
 : ${BSDDIALOG_EXTRA=3}
 : ${BSDDIALOG_ESC=5}
 : ${BSDDIALOG_ERROR=255}
+export BSDINSTALL_USE_DISTRIBUTIONS=y
 
 kbdcontrol -d >/dev/null 2>&1
 if [ $? -eq 0 ]; then
 	# Syscons: use xterm, start interesting things on other VTYs
 	TERM=xterm
 
 	# Don't send ESC on function-key 62/63 (left/right command key)
 	kbdcontrol -f 62 '' > /dev/null 2>&1
 	kbdcontrol -f 63 '' > /dev/null 2>&1
 
 	if [ -z "$EXTERNAL_VTY_STARTED" ]; then
 		# Init will clean these processes up if/when the system
 		# goes multiuser
 		touch /tmp/bsdinstall_log
 		tail -f /tmp/bsdinstall_log > /dev/ttyv2 &
 		/usr/libexec/getty autologin ttyv3 &
 		EXTERNAL_VTY_STARTED=1
 	fi
 else
 	# Serial or other console
 	echo
 	echo "Welcome to FreeBSD!"
 	echo
 	echo "Please choose the appropriate terminal type for your system."
 	echo "Common console types are:"
 	echo "   ansi     Standard ANSI terminal"
 	echo "   vt100    VT100 or compatible terminal"
 	echo "   xterm    xterm terminal emulator (or compatible)"
 	echo
 	echo -n "Console type [vt100]: "
 	read TERM
 	TERM=${TERM:-vt100}
 fi
 export TERM
 
 # Query terminal size; useful for serial lines.
 resizewin -z
 
 if [ -f /etc/installerconfig ]; then
 	if [ "$1" != "primary" ]; then
 		bsddialog --backtitle "FreeBSD Installer" --title "Installing" --msgbox "FreeBSD is being installed from a script; please use the primary console." 0 0
 		. "$0"
 	elif bsdinstall script /etc/installerconfig; then
 		bsddialog --backtitle "FreeBSD Installer" --title "Complete" --no-cancel --ok-label "Reboot" --pause "Installation of FreeBSD complete! Rebooting in 10 seconds" 10 30 10
 		reboot
 	else
 		bsddialog --backtitle "FreeBSD Installer" --title "Error" --textbox /tmp/bsdinstall_log 0 0
 	fi
 	exit 
 fi
 
 bsddialog --backtitle "FreeBSD Installer" --title "Welcome" --extra-button --extra-label "Shell" --ok-label "Install" --cancel-label "Live System" --yesno "Welcome to FreeBSD! Would you like to begin an installation or use the live system?" 0 0
 
 case $? in
 $BSDDIALOG_OK)	# Install
 	# If not netbooting, have the installer configure the network
 	dlv=`/sbin/sysctl -n vfs.nfs.diskless_valid 2> /dev/null`
 	if [ ${dlv:=0} -eq 0 -a ! -f /etc/diskless ]; then
 		BSDINSTALL_CONFIGCURRENT=yes; export BSDINSTALL_CONFIGCURRENT
 	fi
 
 	trap true SIGINT	# Ignore cntrl-C here
 	bsdinstall
 	if [ $? -eq 0 ]; then
 		bsddialog --backtitle "FreeBSD Installer" --title "Complete" --ok-label "Reboot" --extra-button --extra-label "Shutdown" --cancel-label "Live System" --yesno "Installation of FreeBSD complete! Would you like to reboot into the installed system now?" 0 0
 
 		case $? in
 		$BSDDIALOG_OK)		# Reboot
 			reboot
 			;;
 		$BSDDIALOG_EXTRA)	# Shutdown
 			shutdown -p now
 			# shutdown(8) daemonizes, with the actual signal to
 			# init(8) happening in the child, but if we exit the
 			# script then runconsoles will clean up its children
 			# thinking we're trying to go multiuser (and if the
 			# user has disabled multiple console support we'll
 			# still start trying to go multi-user, which gives
 			# confusing output on the console if the daemon is slow
 			# to run). Thus we spin while the daemon runs.
 			while true; do
 				sleep 1
 			done
 			;;
 		$BSDDIALOG_CANCEL)	# Live System
 			exit 0
 			;;
 		esac
 	else
 		. "$0"
 	fi
 	;;
 $BSDDIALOG_CANCEL)	# Live System
 	exit 0
 	;;
 $BSDDIALOG_EXTRA)	# Shell
 	clear
 	echo "When finished, type 'exit' to return to the installer."
 	/bin/sh
 	. "$0"
 	;;
 esac