MMC: OMAP SD/MMC: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment not set. Validating first E-fuse MAC Net: Could not get PHY for ethernet@4a100000: addr 0 eth0: ethernet@4a100000 Warning: usb_ether MAC addresses don't match: Address in ROM is de:ad:be:ef:00:01 Address in environment is 60:64:05:f1:b9:a4 , eth1: usb_ether Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... 78134 bytes read in 6 ms (12.4 MiB/s) Found EFI removable media binary efi/boot/bootarm.efi Scanning disk mmc@48060000.blk... Found 3 disks BootOrder not defined 608564 bytes read in 40 ms (14.5 MiB/s) ## Starting EFI application at 82000000 ... Consoles: EFI console Reading loader env vars from /efi/freebsd/loader.env Setting currdev to disk0p1: FreeBSD/arm EFI loader, Revision 1.1 Command line arguments: l EFI version: 2.70 EFI Firmware: Das U-Boot (rev 8217.1024) Console: efi (0) Load Path: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x42f,0x18fa8)/efi\boot\bootarm.efi Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x42f,0x18fa8) Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x42f,0x18fa8) Setting currdev to disk0p1: Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,0x01,0,0x193d7,0x5e6c11) Setting currdev to disk0p2: Loading /boot/defaults/loader.conf Loading /boot/device.hints Loading /boot/loader.conf Loading /boot/loader.conf.local Loading kernel... /boot/kernel/kernel text=0x84ae24 data=0xb3de0+0x2583e0 syms=[0x4+0xa8210+0x4+0x10ae7e] Loading configured modules... can't find '/boot/entropy' /boot/kernel/umodem.ko text=0x1be0 text=0x1310 data=0x1088+0xf80 syms=[0x4+0x1070+0x4+0xbcd] loading required module 'ucom' /boot/kernel/ucom.ko text=0x1f74 text=0x2e30 data=0x1088+0x17b4 syms=[0x4+0x14f0+0x4+0xc5d] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 5 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot Using DTB provided by EFI at 0x87ee9000. Kernel entry at 0x95000180... Kernel args: (null) -