diff --git a/sys/conf/options b/sys/conf/options index 555484360a2b..e625fdca214d 100644 --- a/sys/conf/options +++ b/sys/conf/options @@ -1,1024 +1,1025 @@ # # On the handling of kernel options # # All kernel options should be listed in NOTES, with suitable # descriptions. Negative options (options that make some code not # compile) should be commented out; LINT (generated from NOTES) should # compile as much code as possible. Try to structure option-using # code so that a single option only switch code on, or only switch # code off, to make it possible to have a full compile-test. If # necessary, you can check for COMPILING_LINT to get maximum code # coverage. # # All new options shall also be listed in either "conf/options" or # "conf/options.". Options that affect a single source-file # .[c|s] should be directed into "opt_.h", while options # that affect multiple files should either go in "opt_global.h" if # this is a kernel-wide option (used just about everywhere), or in # "opt_.h" if it affects only some files. # Note that the effect of listing only an option without a # header-file-name in conf/options (and cousins) is that the last # convention is followed. # # This handling scheme is not yet fully implemented. # # # Format of this file: # Option name filename # # If filename is missing, the default is # opt_.h AAC_DEBUG opt_aac.h AACRAID_DEBUG opt_aacraid.h AHC_ALLOW_MEMIO opt_aic7xxx.h AHC_TMODE_ENABLE opt_aic7xxx.h AHC_DUMP_EEPROM opt_aic7xxx.h AHC_DEBUG opt_aic7xxx.h AHC_DEBUG_OPTS opt_aic7xxx.h AHC_REG_PRETTY_PRINT opt_aic7xxx.h AHD_DEBUG opt_aic79xx.h AHD_DEBUG_OPTS opt_aic79xx.h AHD_TMODE_ENABLE opt_aic79xx.h AHD_REG_PRETTY_PRINT opt_aic79xx.h # Debugging options. ALT_BREAK_TO_DEBUGGER opt_kdb.h BREAK_TO_DEBUGGER opt_kdb.h BUF_TRACKING opt_global.h DDB DDB_BUFR_SIZE opt_ddb.h DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h DDB_CAPTURE_MAXBUFSIZE opt_ddb.h DDB_CTF opt_ddb.h DDB_NUMSYM opt_ddb.h EARLY_PRINTF opt_global.h FULL_BUF_TRACKING opt_global.h GDB KDB opt_global.h KDB_TRACE opt_kdb.h KDB_UNATTENDED opt_kdb.h KLD_DEBUG opt_kld.h NUM_CORE_FILES opt_global.h QUEUE_MACRO_DEBUG_TRACE opt_global.h QUEUE_MACRO_DEBUG_TRASH opt_global.h SYSCTL_DEBUG opt_sysctl.h TEXTDUMP_PREFERRED opt_ddb.h TEXTDUMP_VERBOSE opt_ddb.h TSLOG opt_global.h TSLOG_PAGEZERO opt_global.h TSLOGSIZE opt_global.h # Miscellaneous options. ALQ ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h ATSE_CFI_HACK opt_cfi.h AUDIT opt_global.h BOOTHOWTO opt_global.h BOOTVERBOSE opt_global.h CALLOUT_PROFILING CAPABILITIES opt_capsicum.h CAPABILITY_MODE opt_capsicum.h CC_CDG opt_global.h CC_CHD opt_global.h CC_CUBIC opt_global.h CC_DEFAULT opt_cc.h CC_DCTCP opt_global.h CC_HD opt_global.h CC_HTCP opt_global.h CC_NEWRENO opt_global.h CC_VEGAS opt_global.h COMPAT_43 opt_global.h COMPAT_43TTY opt_global.h COMPAT_FREEBSD4 opt_global.h COMPAT_FREEBSD5 opt_global.h COMPAT_FREEBSD6 opt_global.h COMPAT_FREEBSD7 opt_global.h COMPAT_FREEBSD9 opt_global.h COMPAT_FREEBSD10 opt_global.h COMPAT_FREEBSD11 opt_global.h COMPAT_FREEBSD12 opt_global.h COMPAT_FREEBSD13 opt_global.h COMPAT_FREEBSD14 opt_global.h COMPAT_LINUXKPI opt_dontuse.h COMPILING_LINT opt_global.h CY_PCI_FASTINTR DEADLKRES opt_watchdog.h EXPERIMENTAL opt_global.h DIRECTIO FILEMON opt_dontuse.h FFCLOCK FULL_PREEMPTION opt_sched.h GZIO opt_gzio.h IMGACT_BINMISC opt_dontuse.h IPI_PREEMPTION opt_sched.h GEOM_BDE opt_geom.h GEOM_CACHE opt_geom.h GEOM_CONCAT opt_geom.h GEOM_ELI opt_geom.h GEOM_GATE opt_geom.h GEOM_JOURNAL opt_geom.h GEOM_LABEL opt_geom.h GEOM_LABEL_GPT opt_geom.h GEOM_LINUX_LVM opt_geom.h GEOM_MAP opt_geom.h GEOM_MIRROR opt_geom.h GEOM_MOUNTVER opt_geom.h GEOM_MULTIPATH opt_geom.h GEOM_NOP opt_geom.h GEOM_PART_APM opt_geom.h GEOM_PART_BSD opt_geom.h GEOM_PART_BSD64 opt_geom.h GEOM_PART_EBR opt_geom.h GEOM_PART_GPT opt_geom.h GEOM_PART_LDM opt_geom.h GEOM_PART_MBR opt_geom.h GEOM_RAID opt_geom.h GEOM_RAID3 opt_geom.h GEOM_SHSEC opt_geom.h GEOM_STRIPE opt_geom.h GEOM_UZIP opt_geom.h GEOM_UZIP_DEBUG opt_geom.h GEOM_VINUM opt_geom.h GEOM_VIRSTOR opt_geom.h GEOM_ZERO opt_geom.h IFLIB opt_iflib.h KDTRACE_HOOKS opt_global.h KDTRACE_FRAME opt_kdtrace.h KN_HASHSIZE opt_kqueue.h KSTACK_MAX_PAGES KSTACK_PAGES KSTACK_USAGE_PROF KTRACE KTRACE_REQUEST_POOL opt_ktrace.h LIBICONV MAC opt_global.h MAC_BIBA opt_dontuse.h MAC_BSDEXTENDED opt_dontuse.h MAC_DDB opt_dontuse.h MAC_IFOFF opt_dontuse.h MAC_IPACL opt_dontuse.h MAC_LOMAC opt_dontuse.h MAC_MLS opt_dontuse.h MAC_NONE opt_dontuse.h MAC_NTPD opt_dontuse.h MAC_PARTITION opt_dontuse.h MAC_PORTACL opt_dontuse.h MAC_PRIORITY opt_dontuse.h MAC_SEEOTHERUIDS opt_dontuse.h MAC_STATIC opt_mac.h MAC_STUB opt_dontuse.h MAC_TEST opt_dontuse.h MAC_GRANTBYLABEL opt_dontuse.h MAC_VERIEXEC opt_dontuse.h MAC_VERIEXEC_SHA1 opt_dontuse.h MAC_VERIEXEC_SHA256 opt_dontuse.h MAC_VERIEXEC_SHA384 opt_dontuse.h MAC_VERIEXEC_SHA512 opt_dontuse.h MD_ROOT opt_md.h MD_ROOT_FSTYPE opt_md.h MD_ROOT_READONLY opt_md.h MD_ROOT_SIZE opt_md.h MD_ROOT_MEM opt_md.h MFI_DEBUG opt_mfi.h MFI_DECODE_LOG opt_mfi.h MPROF_BUFFERS opt_mprof.h MPROF_HASH_SIZE opt_mprof.h NEW_PCIB opt_global.h NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h NO_ADAPTIVE_RWLOCKS NO_ADAPTIVE_SX NO_OBSOLETE_CODE opt_global.h NO_SYSCTL_DESCR opt_global.h NSWBUF_MIN opt_param.h MBUF_PACKET_ZONE_DISABLE opt_global.h PANIC_REBOOT_WAIT_TIME opt_panic.h PCI_HP opt_pci.h PCI_IOV opt_global.h PPC_DEBUG opt_ppc.h PPC_PROBE_CHIPSET opt_ppc.h PPS_SYNC opt_ntp.h PREEMPTION opt_sched.h QUOTA SCHED_4BSD opt_sched.h SCHED_STATS opt_sched.h SCHED_ULE opt_sched.h SLEEPQUEUE_PROFILING SLHCI_DEBUG opt_slhci.h STACK opt_stack.h SUIDDIR MSGMNB opt_sysvipc.h MSGMNI opt_sysvipc.h MSGSEG opt_sysvipc.h MSGSSZ opt_sysvipc.h MSGTQL opt_sysvipc.h SEMMNI opt_sysvipc.h SEMMNS opt_sysvipc.h SEMMNU opt_sysvipc.h SEMMSL opt_sysvipc.h SEMOPM opt_sysvipc.h SEMUME opt_sysvipc.h SHMALL opt_sysvipc.h SHMMAX opt_sysvipc.h SHMMAXPGS opt_sysvipc.h SHMMIN opt_sysvipc.h SHMMNI opt_sysvipc.h SHMSEG opt_sysvipc.h SYSVMSG opt_sysvipc.h SYSVSEM opt_sysvipc.h SYSVSHM opt_sysvipc.h SW_WATCHDOG opt_watchdog.h TCPHPTS TCP_REQUEST_TRK opt_global.h TCP_ACCOUNTING opt_global.h TCP_BBR opt_inet.h TCP_RACK opt_inet.h # # TCP SaD Detection is an experimental Sack attack Detection (SaD) # algorithm that uses "normal" behaviour with SACK's to detect # a possible attack. It is strictly experimental at this point. # TCP_SAD_DETECTION opt_inet.h TURNSTILE_PROFILING UMTX_PROFILING UMTX_CHAINS opt_global.h VERBOSE_SYSINIT ZSTDIO opt_zstdio.h # Sanitizers COVERAGE opt_global.h KASAN opt_global.h KCOV KCSAN opt_global.h KMSAN opt_global.h KUBSAN opt_global.h # POSIX kernel options P1003_1B_MQUEUE opt_posix.h P1003_1B_SEMAPHORES opt_posix.h _KPOSIX_PRIORITY_SCHEDULING opt_posix.h # Do we want the config file compiled into the kernel? INCLUDE_CONFIG_FILE opt_config.h # Options for static filesystems. These should only be used at config # time, since the corresponding lkms cannot work if there are any static # dependencies. Unusability is enforced by hiding the defines for the # options in a never-included header. AUTOFS opt_dontuse.h CD9660 opt_dontuse.h EXT2FS opt_dontuse.h FDESCFS opt_dontuse.h FFS opt_dontuse.h FUSEFS opt_dontuse.h MSDOSFS opt_dontuse.h NULLFS opt_dontuse.h PROCFS opt_dontuse.h PSEUDOFS opt_dontuse.h SMBFS opt_dontuse.h TARFS opt_dontuse.h TMPFS opt_dontuse.h UDF opt_dontuse.h UNIONFS opt_dontuse.h ZFS opt_dontuse.h # Pseudofs debugging PSEUDOFS_TRACE opt_pseudofs.h # Tarfs debugging TARFS_DEBUG opt_tarfs.h # In-kernel GSS-API KGSSAPI opt_kgssapi.h KGSSAPI_DEBUG opt_kgssapi.h # These static filesystems have one slightly bogus static dependency in # sys/i386/i386/autoconf.c. If any of these filesystems are # statically compiled into the kernel, code for mounting them as root # filesystems will be enabled - but look below. # NFSCL - client # NFSD - server NFSCL opt_nfs.h NFSD opt_nfs.h # filesystems and libiconv bridge CD9660_ICONV opt_dontuse.h MSDOSFS_ICONV opt_dontuse.h UDF_ICONV opt_dontuse.h # If you are following the conditions in the copyright, # you can enable soft-updates which will speed up a lot of thigs # and make the system safer from crashes at the same time. # otherwise a STUB module will be compiled in. SOFTUPDATES opt_ffs.h # On small, embedded systems, it can be useful to turn off support for # snapshots. It saves about 30-40k for a feature that would be lightly # used, if it is used at all. NO_FFS_SNAPSHOT opt_ffs.h # Enabling this option turns on support for Access Control Lists in UFS, # which can be used to support high security configurations. Depends on # UFS_EXTATTR. UFS_ACL opt_ufs.h # Enabling this option turns on support for extended attributes in UFS-based # filesystems, which can be used to support high security configurations # as well as new filesystem features. UFS_EXTATTR opt_ufs.h UFS_EXTATTR_AUTOSTART opt_ufs.h # Enable fast hash lookups for large directories on UFS-based filesystems. UFS_DIRHASH opt_ufs.h # Enable gjournal-based UFS journal. UFS_GJOURNAL opt_ufs.h # The below sentence is not in English, and neither is this one. # We plan to remove the static dependences above, with a # _ROOT option to control if it usable as root. This list # allows these options to be present in config files already (though # they won't make any difference yet). NFS_ROOT opt_nfsroot.h # SMB/CIFS requester NETSMB opt_netsmb.h # Enable debugnet(4) networking support. DEBUGNET opt_global.h # Enable netdump(4) client support. NETDUMP opt_global.h # Enable netgdb(4) support. NETGDB opt_global.h # Options used only in subr_param.c. HZ opt_param.h MAXFILES opt_param.h NBUF opt_param.h NSFBUFS opt_param.h VM_BCACHE_SIZE_MAX opt_param.h VM_SWZONE_SIZE_MAX opt_param.h MAXUSERS DFLDSIZ opt_param.h MAXDSIZ opt_param.h MAXSSIZ opt_param.h # Generic SCSI options. CAM_MAX_HIGHPOWER opt_cam.h CAMDEBUG opt_cam.h CAM_DEBUG_COMPILE opt_cam.h CAM_DEBUG_DELAY opt_cam.h CAM_DEBUG_BUS opt_cam.h CAM_DEBUG_TARGET opt_cam.h CAM_DEBUG_LUN opt_cam.h CAM_DEBUG_FLAGS opt_cam.h CAM_BOOT_DELAY opt_cam.h CAM_IOSCHED_DYNAMIC opt_cam.h CAM_IO_STATS opt_cam.h CAM_TEST_FAILURE opt_cam.h SCSI_DELAY opt_scsi.h SCSI_NO_SENSE_STRINGS opt_scsi.h SCSI_NO_OP_STRINGS opt_scsi.h # Options used only in cam/ata/ata_da.c ATA_STATIC_ID opt_ada.h # Options used only in cam/scsi/scsi_cd.c CHANGER_MIN_BUSY_SECONDS opt_cd.h CHANGER_MAX_BUSY_SECONDS opt_cd.h # Options used only in cam/scsi/scsi_da.c DA_TRACK_REFS opt_da.h # Options used only in cam/scsi/scsi_sa.c. SA_IO_TIMEOUT opt_sa.h SA_SPACE_TIMEOUT opt_sa.h SA_REWIND_TIMEOUT opt_sa.h SA_ERASE_TIMEOUT opt_sa.h SA_1FM_AT_EOD opt_sa.h # Options used only in cam/scsi/scsi_pt.c SCSI_PT_DEFAULT_TIMEOUT opt_pt.h # Options used only in cam/scsi/scsi_ses.c SES_ENABLE_PASSTHROUGH opt_ses.h # Options used in dev/sym/ (Symbios SCSI driver). SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 # disabled:0 (default), enabled:1 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking # disabled:0, enabled:1 (default) SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported # default:8, range:[1..64] # Options used only in dev/isp/* ISP_TARGET_MODE opt_isp.h ISP_FW_CRASH_DUMP opt_isp.h ISP_DEFAULT_ROLES opt_isp.h ISP_INTERNAL_TARGET opt_isp.h ISP_FCTAPE_OFF opt_isp.h # Options used only in dev/iscsi ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h # Net stuff. ACCEPT_FILTER_DATA ACCEPT_FILTER_DNS ACCEPT_FILTER_HTTP ALTQ opt_global.h ALTQ_CBQ opt_altq.h ALTQ_CDNR opt_altq.h ALTQ_CODEL opt_altq.h ALTQ_DEBUG opt_altq.h ALTQ_HFSC opt_altq.h ALTQ_FAIRQ opt_altq.h ALTQ_NOPCC opt_altq.h ALTQ_PRIQ opt_altq.h ALTQ_RED opt_altq.h ALTQ_RIO opt_altq.h BOOTP opt_bootp.h BOOTP_BLOCKSIZE opt_bootp.h BOOTP_COMPAT opt_bootp.h BOOTP_NFSROOT opt_bootp.h BOOTP_NFSV3 opt_bootp.h BOOTP_WIRED_TO opt_bootp.h DEVICE_POLLING DUMMYNET opt_ipdn.h RATELIMIT opt_ratelimit.h RATELIMIT_DEBUG opt_ratelimit.h INET opt_inet.h INET6 opt_inet6.h STATS opt_global.h IPDIVERT IPFILTER opt_ipfilter.h IPFILTER_DEFAULT_BLOCK opt_ipfilter.h IPFILTER_LOG opt_ipfilter.h IPFILTER_LOOKUP opt_ipfilter.h IPFIREWALL opt_ipfw.h IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h IPFIREWALL_NAT opt_ipfw.h IPFIREWALL_NAT64 opt_ipfw.h IPFIREWALL_NPTV6 opt_ipfw.h IPFIREWALL_VERBOSE opt_ipfw.h IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h IPFIREWALL_PMOD opt_ipfw.h IPSEC opt_ipsec.h IPSEC_DEBUG opt_ipsec.h IPSEC_SUPPORT opt_ipsec.h IPSTEALTH KERN_TLS KRPC LIBALIAS LIBMCHAIN MBUF_PROFILING MBUF_STRESS_TEST MROUTING opt_mrouting.h NFSLOCKD NETLINK opt_global.h PF_DEFAULT_TO_DROP opt_pf.h ROUTE_MPATH opt_route.h ROUTETABLES opt_route.h FIB_ALGO opt_route.h RSS opt_rss.h SLIP_IFF_OPTS opt_slip.h TCPPCAP opt_global.h SIFTR TCP_BLACKBOX opt_global.h TCP_HHOOK opt_global.h TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading TCP_RFC7413 opt_inet.h TCP_RFC7413_MAX_KEYS opt_inet.h TCP_RFC7413_MAX_PSKS opt_inet.h TCP_SIGNATURE opt_ipsec.h VLAN_ARRAY opt_vlan.h XDR XBONEHACK # # SCTP # SCTP opt_sctp.h SCTP_SUPPORT opt_sctp.h SCTP_DEBUG opt_sctp.h # Enable debug printfs SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns. SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats. SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats # # # # Netgraph(4). Use option NETGRAPH to enable the base netgraph code. # Each netgraph node type can be either be compiled into the kernel # or loaded dynamically. To get the former, include the corresponding # option below. Each type has its own man page, e.g. ng_async(4). NETGRAPH NETGRAPH_DEBUG opt_netgraph.h NETGRAPH_ASYNC opt_netgraph.h NETGRAPH_BLUETOOTH opt_netgraph.h NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h NETGRAPH_BLUETOOTH_H4 opt_netgraph.h NETGRAPH_BLUETOOTH_HCI opt_netgraph.h NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h NETGRAPH_BLUETOOTH_UBT opt_netgraph.h NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h NETGRAPH_BPF opt_netgraph.h NETGRAPH_BRIDGE opt_netgraph.h NETGRAPH_CAR opt_netgraph.h NETGRAPH_CHECKSUM opt_netgraph.h NETGRAPH_CISCO opt_netgraph.h NETGRAPH_DEFLATE opt_netgraph.h NETGRAPH_DEVICE opt_netgraph.h NETGRAPH_ECHO opt_netgraph.h NETGRAPH_EIFACE opt_netgraph.h NETGRAPH_ETHER opt_netgraph.h NETGRAPH_ETHER_ECHO opt_netgraph.h NETGRAPH_FEC opt_netgraph.h NETGRAPH_FRAME_RELAY opt_netgraph.h NETGRAPH_GIF opt_netgraph.h NETGRAPH_GIF_DEMUX opt_netgraph.h NETGRAPH_HOLE opt_netgraph.h NETGRAPH_IFACE opt_netgraph.h NETGRAPH_IP_INPUT opt_netgraph.h NETGRAPH_IPFW opt_netgraph.h NETGRAPH_KSOCKET opt_netgraph.h NETGRAPH_L2TP opt_netgraph.h NETGRAPH_LMI opt_netgraph.h NETGRAPH_MPPC_COMPRESSION opt_netgraph.h NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h NETGRAPH_NAT opt_netgraph.h NETGRAPH_NETFLOW opt_netgraph.h NETGRAPH_ONE2MANY opt_netgraph.h NETGRAPH_PATCH opt_netgraph.h NETGRAPH_PIPE opt_netgraph.h NETGRAPH_PPP opt_netgraph.h NETGRAPH_PPPOE opt_netgraph.h NETGRAPH_PPTPGRE opt_netgraph.h NETGRAPH_PRED1 opt_netgraph.h NETGRAPH_RFC1490 opt_netgraph.h NETGRAPH_SOCKET opt_netgraph.h NETGRAPH_SPLIT opt_netgraph.h NETGRAPH_SPPP opt_netgraph.h NETGRAPH_TAG opt_netgraph.h NETGRAPH_TCPMSS opt_netgraph.h NETGRAPH_TEE opt_netgraph.h NETGRAPH_TTY opt_netgraph.h NETGRAPH_UI opt_netgraph.h NETGRAPH_VJC opt_netgraph.h NETGRAPH_VLAN opt_netgraph.h # DRM options DRM_DEBUG opt_drm.h TI_SF_BUF_JUMBO opt_ti.h TI_JUMBO_HDRSPLIT opt_ti.h # Misc debug flags. Most of these should probably be replaced with # 'DEBUG', and then let people recompile just the interesting modules # with 'make CC="cc -DDEBUG"'. DEBUG_1284 opt_ppb_1284.h LPT_DEBUG opt_lpt.h PLIP_DEBUG opt_plip.h LOCKF_DEBUG opt_debug_lockf.h SI_DEBUG opt_debug_si.h IFMEDIA_DEBUG opt_ifmedia.h # Fb options FB_DEBUG opt_fb.h # ppbus related options PERIPH_1284 opt_ppb_1284.h DONTPROBE_1284 opt_ppb_1284.h # smbus related options ENABLE_ALART opt_intpm.h # These cause changes all over the kernel BLKDEV_IOSIZE opt_global.h BURN_BRIDGES opt_global.h DEBUG opt_global.h DEBUG_LOCKS opt_global.h DEBUG_VFS_LOCKS opt_global.h DFLTPHYS opt_global.h DIAGNOSTIC opt_global.h INVARIANT_SUPPORT opt_global.h INVARIANTS opt_global.h KASSERT_PANIC_OPTIONAL opt_global.h MAXCPU opt_global.h MAXMEMDOM opt_global.h MAXPHYS opt_maxphys.h MCLSHIFT opt_global.h MUTEX_NOINLINE opt_global.h LOCK_PROFILING opt_global.h MSIZE opt_global.h REGRESSION opt_global.h RWLOCK_NOINLINE opt_global.h SX_NOINLINE opt_global.h VFS_BIO_DEBUG opt_global.h # These are VM related options VM_KMEM_SIZE opt_vm.h VM_KMEM_SIZE_SCALE opt_vm.h VM_KMEM_SIZE_MAX opt_vm.h VM_NRESERVLEVEL opt_vm.h VM_LEVEL_0_ORDER opt_vm.h NO_SWAPPING opt_vm.h MALLOC_MAKE_FAILURES opt_vm.h MALLOC_PROFILE opt_vm.h MALLOC_DEBUG_MAXZONES opt_vm.h # The MemGuard replacement allocator used for tamper-after-free detection DEBUG_MEMGUARD opt_vm.h # The RedZone malloc(9) protection DEBUG_REDZONE opt_vm.h # Standard SMP options EARLY_AP_STARTUP opt_global.h SMP opt_global.h NUMA opt_global.h +CPUGRP_SCORE opt_global.h # Size of the kernel message buffer MSGBUF_SIZE opt_msgbuf.h # NFS options NFS_MINATTRTIMO opt_nfs.h NFS_MAXATTRTIMO opt_nfs.h NFS_MINDIRATTRTIMO opt_nfs.h NFS_MAXDIRATTRTIMO opt_nfs.h NFS_DEBUG opt_nfs.h # TMPFS options TMPFS_PAGES_MINRESERVED opt_tmpfs.h # Options for uart(4) UART_PPS_ON_CTS opt_uart.h UART_POLL_FREQ opt_uart.h UART_DEV_TOLERANCE_PCT opt_uart.h # options for bus/device framework BUS_DEBUG opt_bus.h # options for USB support USB_DEBUG opt_usb.h USB_HOST_ALIGN opt_usb.h USB_REQ_DEBUG opt_usb.h USB_TEMPLATE opt_usb.h USB_VERBOSE opt_usb.h USB_DMA_SINGLE_ALLOC opt_usb.h USB_EHCI_BIG_ENDIAN_DESC opt_usb.h U3G_DEBUG opt_u3g.h UKBD_DFLT_KEYMAP opt_ukbd.h UPLCOM_INTR_INTERVAL opt_uplcom.h UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h UVSCOM_INTR_INTERVAL opt_uvscom.h # options for the Realtek rtwn driver RTWN_DEBUG opt_rtwn.h RTWN_WITHOUT_UCODE opt_rtwn.h # Embedded system options INIT_PATH ROOTDEVNAME FDC_DEBUG opt_fdc.h PCFCLOCK_VERBOSE opt_pcfclock.h PCFCLOCK_MAX_RETRIES opt_pcfclock.h KTR opt_global.h KTR_ALQ opt_ktr.h KTR_MASK opt_ktr.h KTR_CPUMASK opt_ktr.h KTR_COMPILE opt_global.h KTR_BOOT_ENTRIES opt_global.h KTR_ENTRIES opt_global.h KTR_VERBOSE opt_ktr.h WITNESS opt_global.h WITNESS_KDB opt_witness.h WITNESS_NO_VNODE opt_witness.h WITNESS_SKIPSPIN opt_witness.h WITNESS_COUNT opt_witness.h OPENSOLARIS_WITNESS opt_global.h EPOCH_TRACE opt_global.h # options for ACPI support ACPI_DEBUG opt_acpi.h ACPI_MAX_TASKS opt_acpi.h ACPI_MAX_THREADS opt_acpi.h DEV_ACPI opt_acpi.h ACPI_EARLY_EPYC_WAR opt_acpi.h # options for IOMMU support IOMMU opt_iommu.h # ISA support DEV_ISA opt_isa.h ISAPNP opt_dontuse.h # various 'device presence' options. DEV_BPF opt_bpf.h DEV_CARP opt_carp.h DEV_NETMAP opt_global.h DEV_PCI opt_pci.h DEV_PF opt_pf.h DEV_PFLOG opt_pf.h DEV_PFSYNC opt_pf.h DEV_SPLASH opt_splash.h DEV_VLAN opt_vlan.h # bce driver BCE_DEBUG opt_bce.h BCE_NVRAM_WRITE_SUPPORT opt_bce.h SOCKBUF_DEBUG opt_global.h # options for hifn driver HIFN_DEBUG opt_hifn.h HIFN_RNDTEST opt_hifn.h # options for safenet driver SAFE_DEBUG opt_safe.h SAFE_NO_RNG opt_safe.h SAFE_RNDTEST opt_safe.h # syscons/vt options MAXCONS opt_syscons.h SC_ALT_MOUSE_IMAGE opt_syscons.h SC_CUT_SPACES2TABS opt_syscons.h SC_CUT_SEPCHARS opt_syscons.h SC_DEBUG_LEVEL opt_syscons.h SC_DFLT_FONT opt_syscons.h SC_DFLT_TERM opt_syscons.h SC_DISABLE_KDBKEY opt_syscons.h SC_DISABLE_REBOOT opt_syscons.h SC_HISTORY_SIZE opt_syscons.h SC_KERNEL_CONS_ATTR opt_syscons.h SC_KERNEL_CONS_ATTRS opt_syscons.h SC_KERNEL_CONS_REV_ATTR opt_syscons.h SC_MOUSE_CHAR opt_syscons.h SC_NO_CUTPASTE opt_syscons.h SC_NO_FONT_LOADING opt_syscons.h SC_NO_HISTORY opt_syscons.h SC_NO_MODE_CHANGE opt_syscons.h SC_NO_SUSPEND_VTYSWITCH opt_syscons.h SC_NO_SYSMOUSE opt_syscons.h SC_NO_TERM_DUMB opt_syscons.h SC_NO_TERM_SC opt_syscons.h SC_NO_TERM_TEKEN opt_syscons.h SC_NORM_ATTR opt_syscons.h SC_NORM_REV_ATTR opt_syscons.h SC_PIXEL_MODE opt_syscons.h SC_RENDER_DEBUG opt_syscons.h SC_TWOBUTTON_MOUSE opt_syscons.h VT_ALT_TO_ESC_HACK opt_syscons.h VT_FB_MAX_WIDTH opt_syscons.h VT_FB_MAX_HEIGHT opt_syscons.h VT_MAXWINDOWS opt_syscons.h VT_TWOBUTTON_MOUSE opt_syscons.h DEV_SC opt_syscons.h DEV_VT opt_syscons.h # teken terminal emulator options TEKEN_CONS25 opt_teken.h TEKEN_UTF8 opt_teken.h TERMINAL_KERN_ATTR opt_teken.h TERMINAL_NORM_ATTR opt_teken.h # options for printf PRINTF_BUFR_SIZE opt_printf.h BOOT_TAG opt_printf.h BOOT_TAG_SZ opt_printf.h # kbd options KBD_DISABLE_KEYMAP_LOAD opt_kbd.h KBD_INSTALL_CDEV opt_kbd.h KBD_MAXRETRY opt_kbd.h KBD_MAXWAIT opt_kbd.h KBD_RESETDELAY opt_kbd.h KBD_DELAY1 opt_kbd.h KBD_DELAY2 opt_kbd.h KBDIO_DEBUG opt_kbd.h KBDMUX_DFLT_KEYMAP opt_kbdmux.h # options for the Atheros driver ATH_DEBUG opt_ath.h ATH_TXBUF opt_ath.h ATH_RXBUF opt_ath.h ATH_DIAGAPI opt_ath.h ATH_TX99_DIAG opt_ath.h ATH_ENABLE_DFS opt_ath.h ATH_EEPROM_FIRMWARE opt_ath.h ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h ATH_DEBUG_ALQ opt_ath.h ATH_KTR_INTR_DEBUG opt_ath.h AH_DEBUG opt_ah.h AH_ASSERT opt_ah.h AH_DEBUG_ALQ opt_ah.h AH_REGOPS_FUNC opt_ah.h AH_WRITE_REGDOMAIN opt_ah.h AH_DEBUG_COUNTRY opt_ah.h AH_WRITE_EEPROM opt_ah.h AH_PRIVATE_DIAG opt_ah.h AH_NEED_DESC_SWAP opt_ah.h AH_USE_INIPDGAIN opt_ah.h AH_MAXCHAN opt_ah.h AH_RXCFG_SDMAMW_4BYTES opt_ah.h AH_INTERRUPT_DEBUGGING opt_ah.h # AR5416 and later interrupt mitigation # XXX do not use this for AR9130 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h # options for the Altera mSGDMA driver (altera_msgdma) ALTERA_MSGDMA_DESC_STD opt_altera_msgdma.h ALTERA_MSGDMA_DESC_EXT opt_altera_msgdma.h ALTERA_MSGDMA_DESC_PF_STD opt_altera_msgdma.h ALTERA_MSGDMA_DESC_PF_EXT opt_altera_msgdma.h # options for the Broadcom BCM43xx driver (bwi) BWI_DEBUG opt_bwi.h BWI_DEBUG_VERBOSE opt_bwi.h # options for the Brodacom BCM43xx driver (bwn) BWN_DEBUG opt_bwn.h BWN_GPL_PHY opt_bwn.h BWN_USE_SIBA opt_bwn.h # Options for the SIBA driver SIBA_DEBUG opt_siba.h # options for the Marvell 8335 wireless driver MALO_DEBUG opt_malo.h MALO_TXBUF opt_malo.h MALO_RXBUF opt_malo.h # options for the Marvell wireless driver MWL_DEBUG opt_mwl.h MWL_TXBUF opt_mwl.h MWL_RXBUF opt_mwl.h MWL_DIAGAPI opt_mwl.h MWL_AGGR_SIZE opt_mwl.h MWL_TX_NODROP opt_mwl.h # Options for the Marvell NETA driver MVNETA_MULTIQUEUE opt_mvneta.h MVNETA_KTR opt_mvneta.h # Options for the Intel 802.11ac wireless driver IWM_DEBUG opt_iwm.h # Options for the Intel 802.11n wireless driver IWN_DEBUG opt_iwn.h # Options for the Intel 3945ABG wireless driver WPI_DEBUG opt_wpi.h # dcons options DCONS_BUF_SIZE opt_dcons.h DCONS_POLL_HZ opt_dcons.h DCONS_FORCE_CONSOLE opt_dcons.h DCONS_FORCE_GDB opt_dcons.h # HWPMC options HWPMC_DEBUG opt_global.h HWPMC_HOOKS # 802.11 support layer IEEE80211_DEBUG opt_wlan.h IEEE80211_DEBUG_REFCNT opt_wlan.h IEEE80211_SUPPORT_MESH opt_wlan.h IEEE80211_SUPPORT_SUPERG opt_wlan.h IEEE80211_SUPPORT_TDMA opt_wlan.h IEEE80211_ALQ opt_wlan.h IEEE80211_DFS_DEBUG opt_wlan.h # 802.11 TDMA support TDMA_SLOTLEN_DEFAULT opt_tdma.h TDMA_SLOTCNT_DEFAULT opt_tdma.h TDMA_BINTVAL_DEFAULT opt_tdma.h TDMA_TXRATE_11B_DEFAULT opt_tdma.h TDMA_TXRATE_11G_DEFAULT opt_tdma.h TDMA_TXRATE_11A_DEFAULT opt_tdma.h TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h TDMA_TXRATE_HALF_DEFAULT opt_tdma.h TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h TDMA_TXRATE_11NA_DEFAULT opt_tdma.h TDMA_TXRATE_11NG_DEFAULT opt_tdma.h # VideoMode PICKMODE_DEBUG opt_videomode.h # Network stack virtualization options VIMAGE opt_global.h VNET_DEBUG opt_global.h # Common Flash Interface (CFI) options CFI_SUPPORT_STRATAFLASH opt_cfi.h CFI_ARMEDANDDANGEROUS opt_cfi.h CFI_HARDWAREBYTESWAP opt_cfi.h # Sound options SND_DEBUG opt_snd.h SND_DIAGNOSTIC opt_snd.h SND_FEEDER_MULTIFORMAT opt_snd.h SND_FEEDER_FULL_MULTIFORMAT opt_snd.h SND_FEEDER_RATE_HP opt_snd.h SND_PCM_64 opt_snd.h SND_OLDSTEREO opt_snd.h X86BIOS # Flattened device tree options FDT opt_platform.h FDT_DTB_STATIC opt_platform.h # OFED Infiniband stack OFED opt_ofed.h OFED_DEBUG_INIT opt_ofed.h SDP opt_ofed.h SDP_DEBUG opt_ofed.h IPOIB opt_ofed.h IPOIB_DEBUG opt_ofed.h IPOIB_CM opt_ofed.h # Resource Accounting RACCT opt_global.h RACCT_DEFAULT_TO_DISABLED opt_global.h # Resource Limits RCTL opt_global.h # Random number generator(s) # Alternative RNG algorithm. RANDOM_FENESTRASX opt_global.h # With this, no entropy processor is loaded, but the entropy # harvesting infrastructure is present. This means an entropy # processor may be loaded as a module. RANDOM_LOADABLE opt_global.h # This turns on high-rate and potentially expensive harvesting in # the uma slab allocator. RANDOM_ENABLE_UMA opt_global.h RANDOM_ENABLE_ETHER opt_global.h # This options turns TPM into entropy source. TPM_HARVEST opt_tpm.h # BHND(4) driver BHND_LOGLEVEL opt_global.h # GPIO and child devices GPIO_SPI_DEBUG opt_gpio.h # SPI devices SPIGEN_LEGACY_CDEVNAME opt_spi.h # etherswitch(4) driver RTL8366_SOFT_RESET opt_etherswitch.h # evdev protocol support EVDEV_SUPPORT opt_evdev.h EVDEV_DEBUG opt_evdev.h UINPUT_DEBUG opt_evdev.h # Hyper-V network driver HN_DEBUG opt_hn.h # CAM-based MMC stack MMCCAM # Encrypted kernel crash dumps EKCD opt_ekcd.h # NVME options NVME_USE_NVD opt_nvme.h # amdsbwd options AMDSBWD_DEBUG opt_amdsbwd.h # gcov support GCOV opt_global.h LINDEBUGFS # options for HID support HID_DEBUG opt_hid.h IICHID_DEBUG opt_hid.h IICHID_SAMPLING opt_hid.h HKBD_DFLT_KEYMAP opt_hkbd.h HIDRAW_MAKE_UHID_ALIAS opt_hid.h # kenv options # The early kernel environment (loader environment, config(8)-provided static) # is typically cleared after the dynamic environment comes up to ensure that # we're not inadvertently holding on to 'secret' values in these stale envs. # This option is insecure except in controlled environments where the static # environment's contents are known to be safe. PRESERVE_EARLY_KENV opt_global.h diff --git a/sys/kern/subr_smp.c b/sys/kern/subr_smp.c index 1f9577fddf9c..ec6b753cdf75 100644 --- a/sys/kern/subr_smp.c +++ b/sys/kern/subr_smp.c @@ -1,1352 +1,1358 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2001, John Baldwin . * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * This module holds the global variables and machine independent functions * used for the kernel SMP support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_sched.h" +#include "opt_global.h" #ifdef SMP MALLOC_DEFINE(M_TOPO, "toponodes", "SMP topology data"); volatile cpuset_t stopped_cpus; volatile cpuset_t started_cpus; volatile cpuset_t suspended_cpus; cpuset_t hlt_cpus_mask; cpuset_t logical_cpus_mask; void (*cpustop_restartfunc)(void); #endif static int sysctl_kern_smp_active(SYSCTL_HANDLER_ARGS); /* This is used in modules that need to work in both SMP and UP. */ cpuset_t all_cpus; int mp_ncpus; /* export this for libkvm consumers. */ int mp_maxcpus = MAXCPU; volatile int smp_started; u_int mp_maxid; /* Array of CPU contexts saved during a panic. */ struct pcb *stoppcbs; static SYSCTL_NODE(_kern, OID_AUTO, smp, CTLFLAG_RD | CTLFLAG_CAPRD | CTLFLAG_MPSAFE, NULL, "Kernel SMP"); SYSCTL_INT(_kern_smp, OID_AUTO, maxid, CTLFLAG_RD|CTLFLAG_CAPRD, &mp_maxid, 0, "Max CPU ID."); SYSCTL_INT(_kern_smp, OID_AUTO, maxcpus, CTLFLAG_RD|CTLFLAG_CAPRD, &mp_maxcpus, 0, "Max number of CPUs that the system was compiled for."); SYSCTL_PROC(_kern_smp, OID_AUTO, active, CTLFLAG_RD|CTLTYPE_INT|CTLFLAG_MPSAFE, NULL, 0, sysctl_kern_smp_active, "I", "Indicates system is running in SMP mode"); int smp_disabled = 0; /* has smp been disabled? */ SYSCTL_INT(_kern_smp, OID_AUTO, disabled, CTLFLAG_RDTUN|CTLFLAG_CAPRD, &smp_disabled, 0, "SMP has been disabled from the loader"); int smp_cpus = 1; /* how many cpu's running */ SYSCTL_INT(_kern_smp, OID_AUTO, cpus, CTLFLAG_RD|CTLFLAG_CAPRD, &smp_cpus, 0, "Number of CPUs online"); int smp_threads_per_core = 1; /* how many SMT threads are running per core */ SYSCTL_INT(_kern_smp, OID_AUTO, threads_per_core, CTLFLAG_RD|CTLFLAG_CAPRD, &smp_threads_per_core, 0, "Number of SMT threads online per core"); int mp_ncores = -1; /* how many physical cores running */ SYSCTL_INT(_kern_smp, OID_AUTO, cores, CTLFLAG_RD|CTLFLAG_CAPRD, &mp_ncores, 0, "Number of physical cores online"); int smp_topology = 0; /* Which topology we're using. */ SYSCTL_INT(_kern_smp, OID_AUTO, topology, CTLFLAG_RDTUN, &smp_topology, 0, "Topology override setting; 0 is default provided by hardware."); #ifdef SMP /* Variables needed for SMP rendezvous. */ static volatile int smp_rv_ncpus; static void (*volatile smp_rv_setup_func)(void *arg); static void (*volatile smp_rv_action_func)(void *arg); static void (*volatile smp_rv_teardown_func)(void *arg); static void *volatile smp_rv_func_arg; static volatile int smp_rv_waiters[4]; /* * Shared mutex to restrict busywaits between smp_rendezvous() and * smp(_targeted)_tlb_shootdown(). A deadlock occurs if both of these * functions trigger at once and cause multiple CPUs to busywait with * interrupts disabled. */ struct mtx smp_ipi_mtx; /* * Let the MD SMP code initialize mp_maxid very early if it can. */ static void mp_setmaxid(void *dummy) { cpu_mp_setmaxid(); KASSERT(mp_ncpus >= 1, ("%s: CPU count < 1", __func__)); KASSERT(mp_ncpus > 1 || mp_maxid == 0, ("%s: one CPU but mp_maxid is not zero", __func__)); KASSERT(mp_maxid >= mp_ncpus - 1, ("%s: counters out of sync: max %d, count %d", __func__, mp_maxid, mp_ncpus)); cpusetsizemin = howmany(mp_maxid + 1, NBBY); } SYSINIT(cpu_mp_setmaxid, SI_SUB_TUNABLES, SI_ORDER_FIRST, mp_setmaxid, NULL); /* * Call the MD SMP initialization code. */ static void mp_start(void *dummy) { mtx_init(&smp_ipi_mtx, "smp rendezvous", NULL, MTX_SPIN); /* Probe for MP hardware. */ if (smp_disabled != 0 || cpu_mp_probe() == 0) { mp_ncores = 1; mp_ncpus = 1; CPU_SETOF(PCPU_GET(cpuid), &all_cpus); return; } cpu_mp_start(); printf("FreeBSD/SMP: Multiprocessor System Detected: %d CPUs\n", mp_ncpus); /* Provide a default for most architectures that don't have SMT/HTT. */ if (mp_ncores < 0) mp_ncores = mp_ncpus; stoppcbs = mallocarray(mp_maxid + 1, sizeof(struct pcb), M_DEVBUF, M_WAITOK | M_ZERO); cpu_mp_announce(); } SYSINIT(cpu_mp, SI_SUB_CPU, SI_ORDER_THIRD, mp_start, NULL); void forward_signal(struct thread *td) { int id; /* * signotify() has already set TDA_AST and TDA_SIG on td_ast for * this thread, so all we need to do is poke it if it is currently * executing so that it executes ast(). */ THREAD_LOCK_ASSERT(td, MA_OWNED); KASSERT(TD_IS_RUNNING(td), ("forward_signal: thread is not TDS_RUNNING")); CTR1(KTR_SMP, "forward_signal(%p)", td->td_proc); if (!smp_started || cold || KERNEL_PANICKED()) return; /* No need to IPI ourself. */ if (td == curthread) return; id = td->td_oncpu; if (id == NOCPU) return; ipi_cpu(id, IPI_AST); } /* * When called the executing CPU will send an IPI to all other CPUs * requesting that they halt execution. * * Usually (but not necessarily) called with 'other_cpus' as its arg. * * - Signals all CPUs in map to stop. * - Waits for each to stop. * * Returns: * -1: error * 0: NA * 1: ok * */ #if defined(__amd64__) || defined(__i386__) #define X86 1 #else #define X86 0 #endif static int generic_stop_cpus(cpuset_t map, u_int type) { #ifdef KTR char cpusetbuf[CPUSETBUFSIZ]; #endif static volatile u_int stopping_cpu = NOCPU; int i; volatile cpuset_t *cpus; KASSERT( type == IPI_STOP || type == IPI_STOP_HARD #if X86 || type == IPI_SUSPEND #endif , ("%s: invalid stop type", __func__)); if (!smp_started) return (0); CTR2(KTR_SMP, "stop_cpus(%s) with %u type", cpusetobj_strprint(cpusetbuf, &map), type); #if X86 /* * When suspending, ensure there are are no IPIs in progress. * IPIs that have been issued, but not yet delivered (e.g. * not pending on a vCPU when running under virtualization) * will be lost, violating FreeBSD's assumption of reliable * IPI delivery. */ if (type == IPI_SUSPEND) mtx_lock_spin(&smp_ipi_mtx); #endif #if X86 if (!nmi_is_broadcast || nmi_kdb_lock == 0) { #endif if (stopping_cpu != PCPU_GET(cpuid)) while (atomic_cmpset_int(&stopping_cpu, NOCPU, PCPU_GET(cpuid)) == 0) while (stopping_cpu != NOCPU) cpu_spinwait(); /* spin */ /* send the stop IPI to all CPUs in map */ ipi_selected(map, type); #if X86 } #endif #if X86 if (type == IPI_SUSPEND) cpus = &suspended_cpus; else #endif cpus = &stopped_cpus; i = 0; while (!CPU_SUBSET(cpus, &map)) { /* spin */ cpu_spinwait(); i++; if (i == 100000000) { printf("timeout stopping cpus\n"); break; } } #if X86 if (type == IPI_SUSPEND) mtx_unlock_spin(&smp_ipi_mtx); #endif stopping_cpu = NOCPU; return (1); } int stop_cpus(cpuset_t map) { return (generic_stop_cpus(map, IPI_STOP)); } int stop_cpus_hard(cpuset_t map) { return (generic_stop_cpus(map, IPI_STOP_HARD)); } #if X86 int suspend_cpus(cpuset_t map) { return (generic_stop_cpus(map, IPI_SUSPEND)); } #endif /* * Called by a CPU to restart stopped CPUs. * * Usually (but not necessarily) called with 'stopped_cpus' as its arg. * * - Signals all CPUs in map to restart. * - Waits for each to restart. * * Returns: * -1: error * 0: NA * 1: ok */ static int generic_restart_cpus(cpuset_t map, u_int type) { #ifdef KTR char cpusetbuf[CPUSETBUFSIZ]; #endif volatile cpuset_t *cpus; #if X86 KASSERT(type == IPI_STOP || type == IPI_STOP_HARD || type == IPI_SUSPEND, ("%s: invalid stop type", __func__)); if (!smp_started) return (0); CTR1(KTR_SMP, "restart_cpus(%s)", cpusetobj_strprint(cpusetbuf, &map)); if (type == IPI_SUSPEND) cpus = &resuming_cpus; else cpus = &stopped_cpus; /* signal other cpus to restart */ if (type == IPI_SUSPEND) CPU_COPY_STORE_REL(&map, &toresume_cpus); else CPU_COPY_STORE_REL(&map, &started_cpus); /* * Wake up any CPUs stopped with MWAIT. From MI code we can't tell if * MONITOR/MWAIT is enabled, but the potentially redundant writes are * relatively inexpensive. */ if (type == IPI_STOP) { struct monitorbuf *mb; u_int id; CPU_FOREACH(id) { if (!CPU_ISSET(id, &map)) continue; mb = &pcpu_find(id)->pc_monitorbuf; atomic_store_int(&mb->stop_state, MONITOR_STOPSTATE_RUNNING); } } if (!nmi_is_broadcast || nmi_kdb_lock == 0) { /* wait for each to clear its bit */ while (CPU_OVERLAP(cpus, &map)) cpu_spinwait(); } #else /* !X86 */ KASSERT(type == IPI_STOP || type == IPI_STOP_HARD, ("%s: invalid stop type", __func__)); if (!smp_started) return (0); CTR1(KTR_SMP, "restart_cpus(%s)", cpusetobj_strprint(cpusetbuf, &map)); cpus = &stopped_cpus; /* signal other cpus to restart */ CPU_COPY_STORE_REL(&map, &started_cpus); /* wait for each to clear its bit */ while (CPU_OVERLAP(cpus, &map)) cpu_spinwait(); #endif return (1); } int restart_cpus(cpuset_t map) { return (generic_restart_cpus(map, IPI_STOP)); } #if X86 int resume_cpus(cpuset_t map) { return (generic_restart_cpus(map, IPI_SUSPEND)); } #endif #undef X86 /* * All-CPU rendezvous. CPUs are signalled, all execute the setup function * (if specified), rendezvous, execute the action function (if specified), * rendezvous again, execute the teardown function (if specified), and then * resume. * * Note that the supplied external functions _must_ be reentrant and aware * that they are running in parallel and in an unknown lock context. */ void smp_rendezvous_action(void) { struct thread *td; void *local_func_arg; void (*local_setup_func)(void*); void (*local_action_func)(void*); void (*local_teardown_func)(void*); #ifdef INVARIANTS int owepreempt; #endif /* Ensure we have up-to-date values. */ atomic_add_acq_int(&smp_rv_waiters[0], 1); while (smp_rv_waiters[0] < smp_rv_ncpus) cpu_spinwait(); /* Fetch rendezvous parameters after acquire barrier. */ local_func_arg = smp_rv_func_arg; local_setup_func = smp_rv_setup_func; local_action_func = smp_rv_action_func; local_teardown_func = smp_rv_teardown_func; /* * Use a nested critical section to prevent any preemptions * from occurring during a rendezvous action routine. * Specifically, if a rendezvous handler is invoked via an IPI * and the interrupted thread was in the critical_exit() * function after setting td_critnest to 0 but before * performing a deferred preemption, this routine can be * invoked with td_critnest set to 0 and td_owepreempt true. * In that case, a critical_exit() during the rendezvous * action would trigger a preemption which is not permitted in * a rendezvous action. To fix this, wrap all of the * rendezvous action handlers in a critical section. We * cannot use a regular critical section however as having * critical_exit() preempt from this routine would also be * problematic (the preemption must not occur before the IPI * has been acknowledged via an EOI). Instead, we * intentionally ignore td_owepreempt when leaving the * critical section. This should be harmless because we do * not permit rendezvous action routines to schedule threads, * and thus td_owepreempt should never transition from 0 to 1 * during this routine. */ td = curthread; td->td_critnest++; #ifdef INVARIANTS owepreempt = td->td_owepreempt; #endif /* * If requested, run a setup function before the main action * function. Ensure all CPUs have completed the setup * function before moving on to the action function. */ if (local_setup_func != smp_no_rendezvous_barrier) { if (local_setup_func != NULL) local_setup_func(local_func_arg); atomic_add_int(&smp_rv_waiters[1], 1); while (smp_rv_waiters[1] < smp_rv_ncpus) cpu_spinwait(); } if (local_action_func != NULL) local_action_func(local_func_arg); if (local_teardown_func != smp_no_rendezvous_barrier) { /* * Signal that the main action has been completed. If a * full exit rendezvous is requested, then all CPUs will * wait here until all CPUs have finished the main action. */ atomic_add_int(&smp_rv_waiters[2], 1); while (smp_rv_waiters[2] < smp_rv_ncpus) cpu_spinwait(); if (local_teardown_func != NULL) local_teardown_func(local_func_arg); } /* * Signal that the rendezvous is fully completed by this CPU. * This means that no member of smp_rv_* pseudo-structure will be * accessed by this target CPU after this point; in particular, * memory pointed by smp_rv_func_arg. * * The release semantic ensures that all accesses performed by * the current CPU are visible when smp_rendezvous_cpus() * returns, by synchronizing with the * atomic_load_acq_int(&smp_rv_waiters[3]). */ atomic_add_rel_int(&smp_rv_waiters[3], 1); td->td_critnest--; KASSERT(owepreempt == td->td_owepreempt, ("rendezvous action changed td_owepreempt")); } void smp_rendezvous_cpus(cpuset_t map, void (* setup_func)(void *), void (* action_func)(void *), void (* teardown_func)(void *), void *arg) { int curcpumap, i, ncpus = 0; /* See comments in the !SMP case. */ if (!smp_started) { spinlock_enter(); if (setup_func != NULL) setup_func(arg); if (action_func != NULL) action_func(arg); if (teardown_func != NULL) teardown_func(arg); spinlock_exit(); return; } /* * Make sure we come here with interrupts enabled. Otherwise we * livelock if smp_ipi_mtx is owned by a thread which sent us an IPI. */ MPASS(curthread->td_md.md_spinlock_count == 0); CPU_FOREACH(i) { if (CPU_ISSET(i, &map)) ncpus++; } if (ncpus == 0) panic("ncpus is 0 with non-zero map"); mtx_lock_spin(&smp_ipi_mtx); /* Pass rendezvous parameters via global variables. */ smp_rv_ncpus = ncpus; smp_rv_setup_func = setup_func; smp_rv_action_func = action_func; smp_rv_teardown_func = teardown_func; smp_rv_func_arg = arg; smp_rv_waiters[1] = 0; smp_rv_waiters[2] = 0; smp_rv_waiters[3] = 0; atomic_store_rel_int(&smp_rv_waiters[0], 0); /* * Signal other processors, which will enter the IPI with * interrupts off. */ curcpumap = CPU_ISSET(curcpu, &map); CPU_CLR(curcpu, &map); ipi_selected(map, IPI_RENDEZVOUS); /* Check if the current CPU is in the map */ if (curcpumap != 0) smp_rendezvous_action(); /* * Ensure that the master CPU waits for all the other * CPUs to finish the rendezvous, so that smp_rv_* * pseudo-structure and the arg are guaranteed to not * be in use. * * Load acquire synchronizes with the release add in * smp_rendezvous_action(), which ensures that our caller sees * all memory actions done by the called functions on other * CPUs. */ while (atomic_load_acq_int(&smp_rv_waiters[3]) < ncpus) cpu_spinwait(); mtx_unlock_spin(&smp_ipi_mtx); } void smp_rendezvous(void (* setup_func)(void *), void (* action_func)(void *), void (* teardown_func)(void *), void *arg) { smp_rendezvous_cpus(all_cpus, setup_func, action_func, teardown_func, arg); } static void smp_topo_fill(struct cpu_group *cg) { int c; for (c = 0; c < cg->cg_children; c++) smp_topo_fill(&cg->cg_child[c]); cg->cg_first = CPU_FFS(&cg->cg_mask) - 1; cg->cg_last = CPU_FLS(&cg->cg_mask) - 1; } struct cpu_group * smp_topo(void) { char cpusetbuf[CPUSETBUFSIZ], cpusetbuf2[CPUSETBUFSIZ]; static struct cpu_group *top = NULL; /* * The first call to smp_topo() is guaranteed to occur * during the kernel boot while we are still single-threaded. */ if (top != NULL) return (top); /* * Check for a fake topology request for debugging purposes. */ switch (smp_topology) { case 1: /* Dual core with no sharing. */ top = smp_topo_1level(CG_SHARE_NONE, 2, 0); break; case 2: /* No topology, all cpus are equal. */ top = smp_topo_none(); break; case 3: /* Dual core with shared L2. */ top = smp_topo_1level(CG_SHARE_L2, 2, 0); break; case 4: /* quad core, shared l3 among each package, private l2. */ top = smp_topo_1level(CG_SHARE_L3, 4, 0); break; case 5: /* quad core, 2 dualcore parts on each package share l2. */ top = smp_topo_2level(CG_SHARE_NONE, 2, CG_SHARE_L2, 2, 0); break; case 6: /* Single-core 2xHTT */ top = smp_topo_1level(CG_SHARE_L1, 2, CG_FLAG_HTT); break; case 7: /* quad core with a shared l3, 8 threads sharing L2. */ top = smp_topo_2level(CG_SHARE_L3, 4, CG_SHARE_L2, 8, CG_FLAG_SMT); break; default: /* Default, ask the system what it wants. */ top = cpu_topo(); break; } /* * Verify the returned topology. */ if (top->cg_count != mp_ncpus) panic("Built bad topology at %p. CPU count %d != %d", top, top->cg_count, mp_ncpus); if (CPU_CMP(&top->cg_mask, &all_cpus)) panic("Built bad topology at %p. CPU mask (%s) != (%s)", top, cpusetobj_strprint(cpusetbuf, &top->cg_mask), cpusetobj_strprint(cpusetbuf2, &all_cpus)); /* * Collapse nonsense levels that may be created out of convenience by * the MD layers. They cause extra work in the search functions. */ while (top->cg_children == 1) { top = &top->cg_child[0]; top->cg_parent = NULL; } smp_topo_fill(top); return (top); } struct cpu_group * smp_topo_alloc(u_int count) { static struct cpu_group *group = NULL; static u_int index; u_int curr; if (group == NULL) { group = mallocarray((mp_maxid + 1) * MAX_CACHE_LEVELS + 1, sizeof(*group), M_DEVBUF, M_WAITOK | M_ZERO); } curr = index; index += count; return (&group[curr]); } struct cpu_group * smp_topo_none(void) { struct cpu_group *top; top = smp_topo_alloc(1); top->cg_parent = NULL; top->cg_child = NULL; top->cg_mask = all_cpus; top->cg_count = mp_ncpus; top->cg_children = 0; top->cg_level = CG_SHARE_NONE; top->cg_flags = 0; - +#if defined(CPUGRP_SCORE) + memset(top->cg_score, CG_SCORE_DEFAULT, sizeof(top->cg_score)); +#endif return (top); } static int smp_topo_addleaf(struct cpu_group *parent, struct cpu_group *child, int share, int count, int flags, int start) { char cpusetbuf[CPUSETBUFSIZ], cpusetbuf2[CPUSETBUFSIZ]; cpuset_t mask; int i; CPU_ZERO(&mask); for (i = 0; i < count; i++, start++) CPU_SET(start, &mask); child->cg_parent = parent; child->cg_child = NULL; child->cg_children = 0; child->cg_level = share; child->cg_count = count; child->cg_flags = flags; child->cg_mask = mask; +#if defined(CPUGRP_SCORE) + memset(child->cg_score, CG_SCORE_DEFAULT, sizeof(child->cg_score)); +#endif parent->cg_children++; for (; parent != NULL; parent = parent->cg_parent) { if (CPU_OVERLAP(&parent->cg_mask, &child->cg_mask)) panic("Duplicate children in %p. mask (%s) child (%s)", parent, cpusetobj_strprint(cpusetbuf, &parent->cg_mask), cpusetobj_strprint(cpusetbuf2, &child->cg_mask)); CPU_OR(&parent->cg_mask, &parent->cg_mask, &child->cg_mask); parent->cg_count += child->cg_count; } return (start); } struct cpu_group * smp_topo_1level(int share, int count, int flags) { struct cpu_group *child; struct cpu_group *top; int packages; int cpu; int i; cpu = 0; packages = mp_ncpus / count; top = smp_topo_alloc(1 + packages); top->cg_child = child = top + 1; top->cg_level = CG_SHARE_NONE; for (i = 0; i < packages; i++, child++) cpu = smp_topo_addleaf(top, child, share, count, flags, cpu); return (top); } struct cpu_group * smp_topo_2level(int l2share, int l2count, int l1share, int l1count, int l1flags) { struct cpu_group *top; struct cpu_group *l1g; struct cpu_group *l2g; int cpu; int i; int j; cpu = 0; top = smp_topo_alloc(1 + mp_ncpus / (l2count * l1count) + mp_ncpus / l1count); l2g = top + 1; top->cg_child = l2g; top->cg_level = CG_SHARE_NONE; top->cg_children = mp_ncpus / (l2count * l1count); l1g = l2g + top->cg_children; for (i = 0; i < top->cg_children; i++, l2g++) { l2g->cg_parent = top; l2g->cg_child = l1g; l2g->cg_level = l2share; for (j = 0; j < l2count; j++, l1g++) cpu = smp_topo_addleaf(l2g, l1g, l1share, l1count, l1flags, cpu); } return (top); } struct cpu_group * smp_topo_find(struct cpu_group *top, int cpu) { struct cpu_group *cg; cpuset_t mask; int children; int i; CPU_SETOF(cpu, &mask); cg = top; for (;;) { if (!CPU_OVERLAP(&cg->cg_mask, &mask)) return (NULL); if (cg->cg_children == 0) return (cg); children = cg->cg_children; for (i = 0, cg = cg->cg_child; i < children; cg++, i++) if (CPU_OVERLAP(&cg->cg_mask, &mask)) break; } return (NULL); } #else /* !SMP */ void smp_rendezvous_cpus(cpuset_t map, void (*setup_func)(void *), void (*action_func)(void *), void (*teardown_func)(void *), void *arg) { /* * In the !SMP case we just need to ensure the same initial conditions * as the SMP case. */ spinlock_enter(); if (setup_func != NULL) setup_func(arg); if (action_func != NULL) action_func(arg); if (teardown_func != NULL) teardown_func(arg); spinlock_exit(); } void smp_rendezvous(void (*setup_func)(void *), void (*action_func)(void *), void (*teardown_func)(void *), void *arg) { smp_rendezvous_cpus(all_cpus, setup_func, action_func, teardown_func, arg); } /* * Provide dummy SMP support for UP kernels. Modules that need to use SMP * APIs will still work using this dummy support. */ static void mp_setvariables_for_up(void *dummy) { mp_ncpus = 1; mp_ncores = 1; mp_maxid = PCPU_GET(cpuid); CPU_SETOF(mp_maxid, &all_cpus); KASSERT(PCPU_GET(cpuid) == 0, ("UP must have a CPU ID of zero")); } SYSINIT(cpu_mp_setvariables, SI_SUB_TUNABLES, SI_ORDER_FIRST, mp_setvariables_for_up, NULL); #endif /* SMP */ void smp_no_rendezvous_barrier(void *dummy) { #ifdef SMP KASSERT((!smp_started),("smp_no_rendezvous called and smp is started")); #endif } void smp_rendezvous_cpus_retry(cpuset_t map, void (* setup_func)(void *), void (* action_func)(void *), void (* teardown_func)(void *), void (* wait_func)(void *, int), struct smp_rendezvous_cpus_retry_arg *arg) { int cpu; CPU_COPY(&map, &arg->cpus); /* * Only one CPU to execute on. */ if (!smp_started) { spinlock_enter(); if (setup_func != NULL) setup_func(arg); if (action_func != NULL) action_func(arg); if (teardown_func != NULL) teardown_func(arg); spinlock_exit(); return; } /* * Execute an action on all specified CPUs while retrying until they * all acknowledge completion. */ for (;;) { smp_rendezvous_cpus( arg->cpus, setup_func, action_func, teardown_func, arg); if (CPU_EMPTY(&arg->cpus)) break; CPU_FOREACH(cpu) { if (!CPU_ISSET(cpu, &arg->cpus)) continue; wait_func(arg, cpu); } } } void smp_rendezvous_cpus_done(struct smp_rendezvous_cpus_retry_arg *arg) { CPU_CLR_ATOMIC(curcpu, &arg->cpus); } /* * If (prio & PDROP) == 0: * Wait for specified idle threads to switch once. This ensures that even * preempted threads have cycled through the switch function once, * exiting their codepaths. This allows us to change global pointers * with no other synchronization. * If (prio & PDROP) != 0: * Force the specified CPUs to switch context at least once. */ int quiesce_cpus(cpuset_t map, const char *wmesg, int prio) { struct pcpu *pcpu; u_int *gen; int error; int cpu; error = 0; if ((prio & PDROP) == 0) { gen = mallocarray(sizeof(u_int), mp_maxid + 1, M_TEMP, M_WAITOK); for (cpu = 0; cpu <= mp_maxid; cpu++) { if (!CPU_ISSET(cpu, &map) || CPU_ABSENT(cpu)) continue; pcpu = pcpu_find(cpu); gen[cpu] = pcpu->pc_idlethread->td_generation; } } for (cpu = 0; cpu <= mp_maxid; cpu++) { if (!CPU_ISSET(cpu, &map) || CPU_ABSENT(cpu)) continue; pcpu = pcpu_find(cpu); thread_lock(curthread); sched_bind(curthread, cpu); thread_unlock(curthread); if ((prio & PDROP) != 0) continue; while (gen[cpu] == pcpu->pc_idlethread->td_generation) { error = tsleep(quiesce_cpus, prio & ~PDROP, wmesg, 1); if (error != EWOULDBLOCK) goto out; error = 0; } } out: thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); if ((prio & PDROP) == 0) free(gen, M_TEMP); return (error); } int quiesce_all_cpus(const char *wmesg, int prio) { return quiesce_cpus(all_cpus, wmesg, prio); } /* * Observe all CPUs not executing in critical section. * We are not in one so the check for us is safe. If the found * thread changes to something else we know the section was * exited as well. */ void quiesce_all_critical(void) { struct thread *td, *newtd; struct pcpu *pcpu; int cpu; MPASS(curthread->td_critnest == 0); CPU_FOREACH(cpu) { pcpu = cpuid_to_pcpu[cpu]; td = pcpu->pc_curthread; for (;;) { if (td->td_critnest == 0) break; cpu_spinwait(); newtd = (struct thread *) atomic_load_acq_ptr((void *)pcpu->pc_curthread); if (td != newtd) break; } } } static void cpus_fence_seq_cst_issue(void *arg __unused) { atomic_thread_fence_seq_cst(); } /* * Send an IPI forcing a sequentially consistent fence. * * Allows replacement of an explicitly fence with a compiler barrier. * Trades speed up during normal execution for a significant slowdown when * the barrier is needed. */ void cpus_fence_seq_cst(void) { #ifdef SMP smp_rendezvous( smp_no_rendezvous_barrier, cpus_fence_seq_cst_issue, smp_no_rendezvous_barrier, NULL ); #else cpus_fence_seq_cst_issue(NULL); #endif } /* Extra care is taken with this sysctl because the data type is volatile */ static int sysctl_kern_smp_active(SYSCTL_HANDLER_ARGS) { int error, active; active = smp_started; error = SYSCTL_OUT(req, &active, sizeof(active)); return (error); } #ifdef SMP void topo_init_node(struct topo_node *node) { bzero(node, sizeof(*node)); TAILQ_INIT(&node->children); } void topo_init_root(struct topo_node *root) { topo_init_node(root); root->type = TOPO_TYPE_SYSTEM; } /* * Add a child node with the given ID under the given parent. * Do nothing if there is already a child with that ID. */ struct topo_node * topo_add_node_by_hwid(struct topo_node *parent, int hwid, topo_node_type type, uintptr_t subtype) { struct topo_node *node; TAILQ_FOREACH_REVERSE(node, &parent->children, topo_children, siblings) { if (node->hwid == hwid && node->type == type && node->subtype == subtype) { return (node); } } node = malloc(sizeof(*node), M_TOPO, M_WAITOK); topo_init_node(node); node->parent = parent; node->hwid = hwid; node->type = type; node->subtype = subtype; TAILQ_INSERT_TAIL(&parent->children, node, siblings); parent->nchildren++; return (node); } /* * Find a child node with the given ID under the given parent. */ struct topo_node * topo_find_node_by_hwid(struct topo_node *parent, int hwid, topo_node_type type, uintptr_t subtype) { struct topo_node *node; TAILQ_FOREACH(node, &parent->children, siblings) { if (node->hwid == hwid && node->type == type && node->subtype == subtype) { return (node); } } return (NULL); } /* * Given a node change the order of its parent's child nodes such * that the node becomes the firt child while preserving the cyclic * order of the children. In other words, the given node is promoted * by rotation. */ void topo_promote_child(struct topo_node *child) { struct topo_node *next; struct topo_node *node; struct topo_node *parent; parent = child->parent; next = TAILQ_NEXT(child, siblings); TAILQ_REMOVE(&parent->children, child, siblings); TAILQ_INSERT_HEAD(&parent->children, child, siblings); while (next != NULL) { node = next; next = TAILQ_NEXT(node, siblings); TAILQ_REMOVE(&parent->children, node, siblings); TAILQ_INSERT_AFTER(&parent->children, child, node, siblings); child = node; } } /* * Iterate to the next node in the depth-first search (traversal) of * the topology tree. */ struct topo_node * topo_next_node(struct topo_node *top, struct topo_node *node) { struct topo_node *next; if ((next = TAILQ_FIRST(&node->children)) != NULL) return (next); if ((next = TAILQ_NEXT(node, siblings)) != NULL) return (next); while (node != top && (node = node->parent) != top) if ((next = TAILQ_NEXT(node, siblings)) != NULL) return (next); return (NULL); } /* * Iterate to the next node in the depth-first search of the topology tree, * but without descending below the current node. */ struct topo_node * topo_next_nonchild_node(struct topo_node *top, struct topo_node *node) { struct topo_node *next; if ((next = TAILQ_NEXT(node, siblings)) != NULL) return (next); while (node != top && (node = node->parent) != top) if ((next = TAILQ_NEXT(node, siblings)) != NULL) return (next); return (NULL); } /* * Assign the given ID to the given topology node that represents a logical * processor. */ void topo_set_pu_id(struct topo_node *node, cpuid_t id) { KASSERT(node->type == TOPO_TYPE_PU, ("topo_set_pu_id: wrong node type: %u", node->type)); KASSERT(CPU_EMPTY(&node->cpuset) && node->cpu_count == 0, ("topo_set_pu_id: cpuset already not empty")); node->id = id; CPU_SET(id, &node->cpuset); node->cpu_count = 1; node->subtype = 1; while ((node = node->parent) != NULL) { KASSERT(!CPU_ISSET(id, &node->cpuset), ("logical ID %u is already set in node %p", id, node)); CPU_SET(id, &node->cpuset); node->cpu_count++; } } static struct topology_spec { topo_node_type type; bool match_subtype; uintptr_t subtype; } topology_level_table[TOPO_LEVEL_COUNT] = { [TOPO_LEVEL_PKG] = { .type = TOPO_TYPE_PKG, }, [TOPO_LEVEL_GROUP] = { .type = TOPO_TYPE_GROUP, }, [TOPO_LEVEL_CACHEGROUP] = { .type = TOPO_TYPE_CACHE, .match_subtype = true, .subtype = CG_SHARE_L3, }, [TOPO_LEVEL_CORE] = { .type = TOPO_TYPE_CORE, }, [TOPO_LEVEL_THREAD] = { .type = TOPO_TYPE_PU, }, }; static bool topo_analyze_table(struct topo_node *root, int all, enum topo_level level, struct topo_analysis *results) { struct topology_spec *spec; struct topo_node *node; int count; if (level >= TOPO_LEVEL_COUNT) return (true); spec = &topology_level_table[level]; count = 0; node = topo_next_node(root, root); while (node != NULL) { if (node->type != spec->type || (spec->match_subtype && node->subtype != spec->subtype)) { node = topo_next_node(root, node); continue; } if (!all && CPU_EMPTY(&node->cpuset)) { node = topo_next_nonchild_node(root, node); continue; } count++; if (!topo_analyze_table(node, all, level + 1, results)) return (false); node = topo_next_nonchild_node(root, node); } /* No explicit subgroups is essentially one subgroup. */ if (count == 0) { count = 1; if (!topo_analyze_table(root, all, level + 1, results)) return (false); } if (results->entities[level] == -1) results->entities[level] = count; else if (results->entities[level] != count) return (false); return (true); } /* * Check if the topology is uniform, that is, each package has the same number * of cores in it and each core has the same number of threads (logical * processors) in it. If so, calculate the number of packages, the number of * groups per package, the number of cachegroups per group, and the number of * logical processors per cachegroup. 'all' parameter tells whether to include * administratively disabled logical processors into the analysis. */ int topo_analyze(struct topo_node *topo_root, int all, struct topo_analysis *results) { results->entities[TOPO_LEVEL_PKG] = -1; results->entities[TOPO_LEVEL_CORE] = -1; results->entities[TOPO_LEVEL_THREAD] = -1; results->entities[TOPO_LEVEL_GROUP] = -1; results->entities[TOPO_LEVEL_CACHEGROUP] = -1; if (!topo_analyze_table(topo_root, all, TOPO_LEVEL_PKG, results)) return (0); KASSERT(results->entities[TOPO_LEVEL_PKG] > 0, ("bug in topology or analysis")); return (1); } #endif /* SMP */ diff --git a/sys/sys/smp.h b/sys/sys/smp.h index 252dc9dc1cae..735cad0439a3 100644 --- a/sys/sys/smp.h +++ b/sys/sys/smp.h @@ -1,298 +1,311 @@ /*- * SPDX-License-Identifier: Beerware * * ---------------------------------------------------------------------------- * "THE BEER-WARE LICENSE" (Revision 42): * wrote this file. As long as you retain this notice you * can do whatever you want with this stuff. If we meet some day, and you think * this stuff is worth it, you can buy me a beer in return. Poul-Henning Kamp * ---------------------------------------------------------------------------- */ #ifndef _SYS_SMP_H_ #define _SYS_SMP_H_ #ifdef _KERNEL #ifndef LOCORE #include #include +#include "opt_global.h" + /* * Types of nodes in the topological tree. */ typedef enum { /* No node has this type; can be used in topo API calls. */ TOPO_TYPE_DUMMY, /* Processing unit aka computing unit aka logical CPU. */ TOPO_TYPE_PU, /* Physical subdivision of a package. */ TOPO_TYPE_CORE, /* CPU L1/L2/L3 cache. */ TOPO_TYPE_CACHE, /* Package aka chip, equivalent to socket. */ TOPO_TYPE_PKG, /* NUMA node. */ TOPO_TYPE_NODE, /* Other logical or physical grouping of PUs. */ /* E.g. PUs on the same dye, or PUs sharing an FPU. */ TOPO_TYPE_GROUP, /* The whole system. */ TOPO_TYPE_SYSTEM } topo_node_type; /* Hardware indenitifier of a topology component. */ typedef unsigned int hwid_t; /* Logical CPU idenitifier. */ typedef int cpuid_t; /* A node in the topology. */ struct topo_node { struct topo_node *parent; TAILQ_HEAD(topo_children, topo_node) children; TAILQ_ENTRY(topo_node) siblings; cpuset_t cpuset; topo_node_type type; uintptr_t subtype; hwid_t hwid; cpuid_t id; int nchildren; int cpu_count; }; /* * Scheduling topology of a NUMA or SMP system. * * The top level topology is an array of pointers to groups. Each group * contains a bitmask of cpus in its group or subgroups. It may also * contain a pointer to an array of child groups. * * The bitmasks at non leaf groups may be used by consumers who support * a smaller depth than the hardware provides. * * The topology may be omitted by systems where all CPUs are equal. */ +#if defined(CPUGRP_SCORE) +#define CG_SCORE_CLASS_MAX 8 +#define CG_SCORE_CAPABILITY_MAX 2 + +#define CG_SCORE_DEFAULT 0x80 +#endif + struct cpu_group { struct cpu_group *cg_parent; /* Our parent group. */ struct cpu_group *cg_child; /* Optional children groups. */ cpuset_t cg_mask; /* Mask of cpus in this group. */ int32_t cg_count; /* Count of cpus in this group. */ int32_t cg_first; /* First cpu in this group. */ int32_t cg_last; /* Last cpu in this group. */ int16_t cg_children; /* Number of children groups. */ int8_t cg_level; /* Shared cache level. */ int8_t cg_flags; /* Traversal modifiers. */ +#if defined(CPUGRP_SCORE) + uint8_t cg_score[CG_SCORE_CLASS_MAX][CG_SCORE_CAPABILITY_MAX]; + /* Performance/Efficiency Score from Intel HFI/ITD */ +#endif }; typedef struct cpu_group *cpu_group_t; /* * Defines common resources for CPUs in the group. The highest level * resource should be used when multiple are shared. */ #define CG_SHARE_NONE 0 #define CG_SHARE_L1 1 #define CG_SHARE_L2 2 #define CG_SHARE_L3 3 #define MAX_CACHE_LEVELS CG_SHARE_L3 /* * Behavior modifiers for load balancing and affinity. */ #define CG_FLAG_HTT 0x01 /* Schedule the alternate core last. */ #define CG_FLAG_SMT 0x02 /* New age htt, less crippled. */ #define CG_FLAG_THREAD (CG_FLAG_HTT | CG_FLAG_SMT) /* Any threading. */ #define CG_FLAG_NODE 0x04 /* NUMA node. */ /* * Convenience routines for building and traversing topologies. */ #ifdef SMP void topo_init_node(struct topo_node *node); void topo_init_root(struct topo_node *root); struct topo_node * topo_add_node_by_hwid(struct topo_node *parent, int hwid, topo_node_type type, uintptr_t subtype); struct topo_node * topo_find_node_by_hwid(struct topo_node *parent, int hwid, topo_node_type type, uintptr_t subtype); void topo_promote_child(struct topo_node *child); struct topo_node * topo_next_node(struct topo_node *top, struct topo_node *node); struct topo_node * topo_next_nonchild_node(struct topo_node *top, struct topo_node *node); void topo_set_pu_id(struct topo_node *node, cpuid_t id); enum topo_level { TOPO_LEVEL_PKG = 0, /* * Some systems have useful sub-package core organizations. On these, * a package has one or more subgroups. Each subgroup contains one or * more cache groups (cores that share a last level cache). */ TOPO_LEVEL_GROUP, TOPO_LEVEL_CACHEGROUP, TOPO_LEVEL_CORE, TOPO_LEVEL_THREAD, TOPO_LEVEL_COUNT /* Must be last */ }; struct topo_analysis { int entities[TOPO_LEVEL_COUNT]; }; int topo_analyze(struct topo_node *topo_root, int all, struct topo_analysis *results); #define TOPO_FOREACH(i, root) \ for (i = root; i != NULL; i = topo_next_node(root, i)) struct cpu_group *smp_topo(void); struct cpu_group *smp_topo_alloc(u_int count); struct cpu_group *smp_topo_none(void); struct cpu_group *smp_topo_1level(int l1share, int l1count, int l1flags); struct cpu_group *smp_topo_2level(int l2share, int l2count, int l1share, int l1count, int l1flags); struct cpu_group *smp_topo_find(struct cpu_group *top, int cpu); extern void (*cpustop_restartfunc)(void); /* The suspend/resume cpusets are x86 only, but minimize ifdefs. */ extern volatile cpuset_t resuming_cpus; /* woken up cpus in suspend pen */ extern volatile cpuset_t started_cpus; /* cpus to let out of stop pen */ extern volatile cpuset_t stopped_cpus; /* cpus in stop pen */ extern volatile cpuset_t suspended_cpus; /* cpus [near] sleeping in susp pen */ extern volatile cpuset_t toresume_cpus; /* cpus to let out of suspend pen */ extern cpuset_t hlt_cpus_mask; /* XXX 'mask' is detail in old impl */ extern cpuset_t logical_cpus_mask; #endif /* SMP */ extern u_int mp_maxid; extern int mp_maxcpus; extern int mp_ncores; extern int mp_ncpus; extern int smp_cpus; extern volatile int smp_started; extern int smp_threads_per_core; extern cpuset_t all_cpus; extern cpuset_t cpuset_domain[MAXMEMDOM]; /* CPUs in each NUMA domain. */ struct pcb; extern struct pcb *stoppcbs; /* * Macro allowing us to determine whether a CPU is absent at any given * time, thus permitting us to configure sparse maps of cpuid-dependent * (per-CPU) structures. */ #define CPU_ABSENT(x_cpu) (!CPU_ISSET(x_cpu, &all_cpus)) /* * Macros to iterate over non-absent CPUs. CPU_FOREACH() takes an * integer iterator and iterates over the available set of CPUs. * CPU_FIRST() returns the id of the first non-absent CPU. CPU_NEXT() * returns the id of the next non-absent CPU. It will wrap back to * CPU_FIRST() once the end of the list is reached. The iterators are * currently implemented via inline functions. */ #define CPU_FOREACH(i) \ for ((i) = 0; (i) <= mp_maxid; (i)++) \ if (!CPU_ABSENT((i))) static __inline int cpu_first(void) { int i; for (i = 0;; i++) if (!CPU_ABSENT(i)) return (i); } static __inline int cpu_next(int i) { for (;;) { i++; if ((u_int)i > mp_maxid) i = 0; if (!CPU_ABSENT(i)) return (i); } } #define CPU_FIRST() cpu_first() #define CPU_NEXT(i) cpu_next((i)) #ifdef SMP /* * Machine dependent functions used to initialize MP support. * * The cpu_mp_probe() should check to see if MP support is present and return * zero if it is not or non-zero if it is. If MP support is present, then * cpu_mp_start() will be called so that MP can be enabled. This function * should do things such as startup secondary processors. It should also * setup mp_ncpus, all_cpus, and smp_cpus. It should also ensure that * smp_started is initialized at the appropriate time. * Once cpu_mp_start() returns, machine independent MP startup code will be * executed and a simple message will be output to the console. Finally, * cpu_mp_announce() will be called so that machine dependent messages about * the MP support may be output to the console if desired. * * The cpu_setmaxid() function is called very early during the boot process * so that the MD code may set mp_maxid to provide an upper bound on CPU IDs * that other subsystems may use. If a platform is not able to determine * the exact maximum ID that early, then it may set mp_maxid to MAXCPU - 1. */ struct thread; struct cpu_group *cpu_topo(void); void cpu_mp_announce(void); int cpu_mp_probe(void); void cpu_mp_setmaxid(void); void cpu_mp_start(void); void forward_signal(struct thread *); int restart_cpus(cpuset_t); int stop_cpus(cpuset_t); int stop_cpus_hard(cpuset_t); #if defined(__amd64__) || defined(__i386__) int suspend_cpus(cpuset_t); int resume_cpus(cpuset_t); #endif void smp_rendezvous_action(void); extern struct mtx smp_ipi_mtx; #endif /* SMP */ int quiesce_all_cpus(const char *, int); int quiesce_cpus(cpuset_t, const char *, int); void quiesce_all_critical(void); void cpus_fence_seq_cst(void); void smp_no_rendezvous_barrier(void *); void smp_rendezvous(void (*)(void *), void (*)(void *), void (*)(void *), void *arg); void smp_rendezvous_cpus(cpuset_t, void (*)(void *), void (*)(void *), void (*)(void *), void *arg); struct smp_rendezvous_cpus_retry_arg { cpuset_t cpus; }; void smp_rendezvous_cpus_retry(cpuset_t, void (*)(void *), void (*)(void *), void (*)(void *), void (*)(void *, int), struct smp_rendezvous_cpus_retry_arg *); void smp_rendezvous_cpus_done(struct smp_rendezvous_cpus_retry_arg *); #endif /* !LOCORE */ #endif /* _KERNEL */ #endif /* _SYS_SMP_H_ */ diff --git a/sys/x86/x86/mp_x86.c b/sys/x86/x86/mp_x86.c index 1027c2c8972b..5d9a57c8febe 100644 --- a/sys/x86/x86/mp_x86.c +++ b/sys/x86/x86/mp_x86.c @@ -1,1749 +1,1757 @@ /*- * Copyright (c) 1996, by Steve Passe * Copyright (c) 2003, by Peter Wemm * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the developer may NOT be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include "opt_acpi.h" #ifdef __i386__ #include "opt_apic.h" #endif #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_gdb.h" #include "opt_kstack_pages.h" #include "opt_pmap.h" #include "opt_sched.h" #include "opt_smp.h" #include "opt_stack.h" +#include "opt_global.h" #include #include #include #include #include /* cngetc() */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DEV_ACPI #include #include #endif static MALLOC_DEFINE(M_CPUS, "cpus", "CPU items"); int mp_naps; /* # of Applications processors */ int boot_cpu_id = -1; /* designated BSP */ /* AP uses this during bootstrap. Do not staticize. */ char *bootSTK; int bootAP; /* Free these after use */ void *bootstacks[MAXCPU]; void *dpcpu; struct susppcb **susppcbs; #ifdef COUNT_IPIS /* Interrupt counts. */ static u_long *ipi_preempt_counts[MAXCPU]; static u_long *ipi_ast_counts[MAXCPU]; u_long *ipi_invltlb_counts[MAXCPU]; u_long *ipi_invlrng_counts[MAXCPU]; u_long *ipi_invlpg_counts[MAXCPU]; u_long *ipi_invlcache_counts[MAXCPU]; u_long *ipi_rendezvous_counts[MAXCPU]; static u_long *ipi_hardclock_counts[MAXCPU]; #endif /* Default cpu_ops implementation. */ struct cpu_ops cpu_ops; /* * Local data and functions. */ static volatile cpuset_t ipi_stop_nmi_pending; volatile cpuset_t resuming_cpus; volatile cpuset_t toresume_cpus; /* used to hold the AP's until we are ready to release them */ struct mtx ap_boot_mtx; /* Set to 1 once we're ready to let the APs out of the pen. */ volatile int aps_ready = 0; /* * Store data from cpu_add() until later in the boot when we actually setup * the APs. */ struct cpu_info *cpu_info; int *apic_cpuids; int cpu_apic_ids[MAXCPU]; _Static_assert(MAXCPU <= MAX_APIC_ID, "MAXCPU cannot be larger that MAX_APIC_ID"); _Static_assert(xAPIC_MAX_APIC_ID <= MAX_APIC_ID, "xAPIC_MAX_APIC_ID cannot be larger that MAX_APIC_ID"); static void release_aps(void *dummy); static void cpustop_handler_post(u_int cpu); static int hyperthreading_allowed = 1; SYSCTL_INT(_machdep, OID_AUTO, hyperthreading_allowed, CTLFLAG_RDTUN, &hyperthreading_allowed, 0, "Use Intel HTT logical CPUs"); static int hyperthreading_intr_allowed = 0; SYSCTL_INT(_machdep, OID_AUTO, hyperthreading_intr_allowed, CTLFLAG_RDTUN, &hyperthreading_intr_allowed, 0, "Allow interrupts on HTT logical CPUs"); static int intr_apic_id_limit = -1; SYSCTL_INT(_machdep, OID_AUTO, intr_apic_id_limit, CTLFLAG_RDTUN, &intr_apic_id_limit, 0, "Maximum permitted APIC ID for interrupt delivery (-1 is unlimited)"); static struct topo_node topo_root; static int pkg_id_shift; static int node_id_shift; static int core_id_shift; static int disabled_cpus; struct cache_info { int id_shift; int present; } static caches[MAX_CACHE_LEVELS]; static bool stop_mwait = false; SYSCTL_BOOL(_machdep, OID_AUTO, stop_mwait, CTLFLAG_RWTUN, &stop_mwait, 0, "Use MONITOR/MWAIT when stopping CPU, if available"); void mem_range_AP_init(void) { if (mem_range_softc.mr_op && mem_range_softc.mr_op->initAP) mem_range_softc.mr_op->initAP(&mem_range_softc); } /* * Round up to the next power of two, if necessary, and then * take log2. * Returns -1 if argument is zero. */ static __inline int mask_width(u_int x) { return (fls(x << (1 - powerof2(x))) - 1); } /* * Add a cache level to the cache topology description. */ static int add_deterministic_cache(int type, int level, int share_count) { if (type == 0) return (0); if (type > 3) { printf("unexpected cache type %d\n", type); return (1); } if (type == 2) /* ignore instruction cache */ return (1); if (level == 0 || level > MAX_CACHE_LEVELS) { printf("unexpected cache level %d\n", level); return (1); } if (caches[level - 1].present) { printf("WARNING: multiple entries for L%u data cache\n", level); printf("%u => %u\n", caches[level - 1].id_shift, mask_width(share_count)); } caches[level - 1].id_shift = mask_width(share_count); caches[level - 1].present = 1; if (caches[level - 1].id_shift > pkg_id_shift) { printf("WARNING: L%u data cache covers more " "APIC IDs than a package (%u > %u)\n", level, caches[level - 1].id_shift, pkg_id_shift); caches[level - 1].id_shift = pkg_id_shift; } if (caches[level - 1].id_shift < core_id_shift) { printf("WARNING: L%u data cache covers fewer " "APIC IDs than a core (%u < %u)\n", level, caches[level - 1].id_shift, core_id_shift); caches[level - 1].id_shift = core_id_shift; } return (1); } /* * Determine topology of processing units and caches for AMD CPUs. * See: * - AMD CPUID Specification (Publication # 25481) * - BKDG for AMD NPT Family 0Fh Processors (Publication # 32559) * - BKDG For AMD Family 10h Processors (Publication # 31116) * - BKDG For AMD Family 15h Models 00h-0Fh Processors (Publication # 42301) * - BKDG For AMD Family 16h Models 00h-0Fh Processors (Publication # 48751) * - PPR For AMD Family 17h Models 00h-0Fh Processors (Publication # 54945) */ static void topo_probe_amd(void) { u_int p[4]; uint64_t v; int level; int nodes_per_socket; int share_count; int type; int i; /* No multi-core capability. */ if ((amd_feature2 & AMDID2_CMP) == 0) return; /* * XXX Lack of an AMD IOMMU driver prevents use of APIC IDs above * xAPIC_MAX_APIC_ID. This is a workaround so we boot and function on * AMD systems with high thread counts, albeit with reduced interrupt * performance. * * We should really set the limit to xAPIC_MAX_APIC_ID by default, and * have the IOMMU driver increase it. That way if a driver is present * but disabled, or is otherwise not able to route the interrupts, the * system can fall back to a functional state. That will require a more * substantial change though, including having the IOMMU initialize * earlier. */ if (intr_apic_id_limit == -1) intr_apic_id_limit = xAPIC_MAX_APIC_ID; /* For families 10h and newer. */ pkg_id_shift = (cpu_procinfo2 & AMDID_COREID_SIZE) >> AMDID_COREID_SIZE_SHIFT; /* For 0Fh family. */ if (pkg_id_shift == 0) pkg_id_shift = mask_width((cpu_procinfo2 & AMDID_CMP_CORES) + 1); /* * Families prior to 16h define the following value as * cores per compute unit and we don't really care about the AMD * compute units at the moment. Perhaps we should treat them as * cores and cores within the compute units as hardware threads, * but that's up for debate. * Later families define the value as threads per compute unit, * so we are following AMD's nomenclature here. */ if ((amd_feature2 & AMDID2_TOPOLOGY) != 0 && CPUID_TO_FAMILY(cpu_id) >= 0x16) { cpuid_count(0x8000001e, 0, p); share_count = ((p[1] >> 8) & 0xff) + 1; core_id_shift = mask_width(share_count); /* * For Zen (17h), gather Nodes per Processor. Each node is a * Zeppelin die; TR and EPYC CPUs will have multiple dies per * package. Communication latency between dies is higher than * within them. */ nodes_per_socket = ((p[2] >> 8) & 0x7) + 1; node_id_shift = pkg_id_shift - mask_width(nodes_per_socket); } if ((amd_feature2 & AMDID2_TOPOLOGY) != 0) { for (i = 0; ; i++) { cpuid_count(0x8000001d, i, p); type = p[0] & 0x1f; level = (p[0] >> 5) & 0x7; share_count = 1 + ((p[0] >> 14) & 0xfff); if (!add_deterministic_cache(type, level, share_count)) break; } } else { if (cpu_exthigh >= 0x80000005) { cpuid_count(0x80000005, 0, p); if (((p[2] >> 24) & 0xff) != 0) { caches[0].id_shift = 0; caches[0].present = 1; } } if (cpu_exthigh >= 0x80000006) { cpuid_count(0x80000006, 0, p); if (((p[2] >> 16) & 0xffff) != 0) { caches[1].id_shift = 0; caches[1].present = 1; } if (((p[3] >> 18) & 0x3fff) != 0) { nodes_per_socket = 1; if ((amd_feature2 & AMDID2_NODE_ID) != 0) { /* * Handle multi-node processors that * have multiple chips, each with its * own L3 cache, on the same die. */ v = rdmsr(0xc001100c); nodes_per_socket = 1 + ((v >> 3) & 0x7); } caches[2].id_shift = pkg_id_shift - mask_width(nodes_per_socket); caches[2].present = 1; } } } } /* * Determine topology of processing units for Intel CPUs * using CPUID Leaf 1 and Leaf 4, if supported. * See: * - Intel 64 Architecture Processor Topology Enumeration * - Intel 64 and IA-32 ArchitecturesSoftware Developer’s Manual, * Volume 3A: System Programming Guide, PROGRAMMING CONSIDERATIONS * FOR HARDWARE MULTI-THREADING CAPABLE PROCESSORS */ static void topo_probe_intel_0x4(void) { u_int p[4]; int max_cores; int max_logical; /* Both zero and one here mean one logical processor per package. */ max_logical = (cpu_feature & CPUID_HTT) != 0 ? (cpu_procinfo & CPUID_HTT_CORES) >> 16 : 1; if (max_logical <= 1) return; if (cpu_high >= 0x4) { cpuid_count(0x04, 0, p); max_cores = ((p[0] >> 26) & 0x3f) + 1; } else max_cores = 1; core_id_shift = mask_width(max_logical/max_cores); KASSERT(core_id_shift >= 0, ("intel topo: max_cores > max_logical\n")); pkg_id_shift = core_id_shift + mask_width(max_cores); } /* * Determine topology of processing units for Intel CPUs * using CPUID Leaf 1Fh or 0Bh, if supported. * See: * - Intel 64 Architecture Processor Topology Enumeration * - Intel 64 and IA-32 ArchitecturesSoftware Developer’s Manual, * Volume 3A: System Programming Guide, PROGRAMMING CONSIDERATIONS * FOR HARDWARE MULTI-THREADING CAPABLE PROCESSORS */ static void topo_probe_intel_0xb(void) { u_int leaf; u_int p[4] = { 0 }; int bits; int type; int i; /* Prefer leaf 1Fh (V2 Extended Topology Enumeration). */ if (cpu_high >= 0x1f) { leaf = 0x1f; cpuid_count(leaf, 0, p); } /* Fall back to leaf 0Bh (Extended Topology Enumeration). */ if (p[1] == 0) { leaf = 0x0b; cpuid_count(leaf, 0, p); } /* Fall back to leaf 04h (Deterministic Cache Parameters). */ if (p[1] == 0) { topo_probe_intel_0x4(); return; } /* We only support three levels for now. */ for (i = 0; ; i++) { cpuid_count(leaf, i, p); bits = p[0] & 0x1f; type = (p[2] >> 8) & 0xff; if (type == 0) break; if (type == CPUID_TYPE_SMT) core_id_shift = bits; else if (type == CPUID_TYPE_CORE) pkg_id_shift = bits; else if (bootverbose) printf("Topology level type %d shift: %d\n", type, bits); } if (pkg_id_shift < core_id_shift) { printf("WARNING: core covers more APIC IDs than a package\n"); core_id_shift = pkg_id_shift; } } /* * Determine topology of caches for Intel CPUs. * See: * - Intel 64 Architecture Processor Topology Enumeration * - Intel 64 and IA-32 Architectures Software Developer’s Manual * Volume 2A: Instruction Set Reference, A-M, * CPUID instruction */ static void topo_probe_intel_caches(void) { u_int p[4]; int level; int share_count; int type; int i; if (cpu_high < 0x4) { /* * Available cache level and sizes can be determined * via CPUID leaf 2, but that requires a huge table of hardcoded * values, so for now just assume L1 and L2 caches potentially * shared only by HTT processing units, if HTT is present. */ caches[0].id_shift = pkg_id_shift; caches[0].present = 1; caches[1].id_shift = pkg_id_shift; caches[1].present = 1; return; } for (i = 0; ; i++) { cpuid_count(0x4, i, p); type = p[0] & 0x1f; level = (p[0] >> 5) & 0x7; share_count = 1 + ((p[0] >> 14) & 0xfff); if (!add_deterministic_cache(type, level, share_count)) break; } } /* * Determine topology of processing units and caches for Intel CPUs. * See: * - Intel 64 Architecture Processor Topology Enumeration */ static void topo_probe_intel(void) { /* * Note that 0x1 <= cpu_high < 4 case should be * compatible with topo_probe_intel_0x4() logic when * CPUID.1:EBX[23:16] > 0 (cpu_cores will be 1) * or it should trigger the fallback otherwise. */ if (cpu_high >= 0xb) topo_probe_intel_0xb(); else if (cpu_high >= 0x1) topo_probe_intel_0x4(); topo_probe_intel_caches(); } /* * Topology information is queried only on BSP, on which this * code runs and for which it can query CPUID information. * Then topology is extrapolated on all packages using an * assumption that APIC ID to hardware component ID mapping is * homogenious. * That doesn't necesserily imply that the topology is uniform. */ void topo_probe(void) { static int cpu_topo_probed = 0; struct x86_topo_layer { int type; int subtype; int id_shift; } topo_layers[MAX_CACHE_LEVELS + 5]; struct topo_node *parent; struct topo_node *node; int layer; int nlayers; int node_id; int i; #if defined(DEV_ACPI) && MAXMEMDOM > 1 int d, domain; #endif if (cpu_topo_probed) return; CPU_ZERO(&logical_cpus_mask); if (mp_ncpus <= 1) ; /* nothing */ else if (cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_HYGON) topo_probe_amd(); else if (cpu_vendor_id == CPU_VENDOR_INTEL) topo_probe_intel(); KASSERT(pkg_id_shift >= core_id_shift, ("bug in APIC topology discovery")); nlayers = 0; bzero(topo_layers, sizeof(topo_layers)); topo_layers[nlayers].type = TOPO_TYPE_PKG; topo_layers[nlayers].id_shift = pkg_id_shift; if (bootverbose) printf("Package ID shift: %u\n", topo_layers[nlayers].id_shift); nlayers++; if (pkg_id_shift > node_id_shift && node_id_shift != 0) { topo_layers[nlayers].type = TOPO_TYPE_GROUP; topo_layers[nlayers].id_shift = node_id_shift; if (bootverbose) printf("Node ID shift: %u\n", topo_layers[nlayers].id_shift); nlayers++; } /* * Consider all caches to be within a package/chip * and "in front" of all sub-components like * cores and hardware threads. */ for (i = MAX_CACHE_LEVELS - 1; i >= 0; --i) { if (caches[i].present) { if (node_id_shift != 0) KASSERT(caches[i].id_shift <= node_id_shift, ("bug in APIC topology discovery")); KASSERT(caches[i].id_shift <= pkg_id_shift, ("bug in APIC topology discovery")); KASSERT(caches[i].id_shift >= core_id_shift, ("bug in APIC topology discovery")); topo_layers[nlayers].type = TOPO_TYPE_CACHE; topo_layers[nlayers].subtype = i + 1; topo_layers[nlayers].id_shift = caches[i].id_shift; if (bootverbose) printf("L%u cache ID shift: %u\n", topo_layers[nlayers].subtype, topo_layers[nlayers].id_shift); nlayers++; } } if (pkg_id_shift > core_id_shift) { topo_layers[nlayers].type = TOPO_TYPE_CORE; topo_layers[nlayers].id_shift = core_id_shift; if (bootverbose) printf("Core ID shift: %u\n", topo_layers[nlayers].id_shift); nlayers++; } topo_layers[nlayers].type = TOPO_TYPE_PU; topo_layers[nlayers].id_shift = 0; nlayers++; #if defined(DEV_ACPI) && MAXMEMDOM > 1 if (vm_ndomains > 1) { for (layer = 0; layer < nlayers; ++layer) { for (i = 0; i <= max_apic_id; ++i) { if ((i & ((1 << topo_layers[layer].id_shift) - 1)) == 0) domain = -1; if (!cpu_info[i].cpu_present) continue; d = acpi_pxm_get_cpu_locality(i); if (domain >= 0 && domain != d) break; domain = d; } if (i > max_apic_id) break; } KASSERT(layer < nlayers, ("NUMA domain smaller than PU")); memmove(&topo_layers[layer+1], &topo_layers[layer], sizeof(*topo_layers) * (nlayers - layer)); topo_layers[layer].type = TOPO_TYPE_NODE; topo_layers[layer].subtype = CG_SHARE_NONE; nlayers++; } #endif topo_init_root(&topo_root); for (i = 0; i <= max_apic_id; ++i) { if (!cpu_info[i].cpu_present) continue; parent = &topo_root; for (layer = 0; layer < nlayers; ++layer) { #if defined(DEV_ACPI) && MAXMEMDOM > 1 if (topo_layers[layer].type == TOPO_TYPE_NODE) { node_id = acpi_pxm_get_cpu_locality(i); } else #endif node_id = i >> topo_layers[layer].id_shift; parent = topo_add_node_by_hwid(parent, node_id, topo_layers[layer].type, topo_layers[layer].subtype); } } parent = &topo_root; for (layer = 0; layer < nlayers; ++layer) { #if defined(DEV_ACPI) && MAXMEMDOM > 1 if (topo_layers[layer].type == TOPO_TYPE_NODE) node_id = acpi_pxm_get_cpu_locality(boot_cpu_id); else #endif node_id = boot_cpu_id >> topo_layers[layer].id_shift; node = topo_find_node_by_hwid(parent, node_id, topo_layers[layer].type, topo_layers[layer].subtype); topo_promote_child(node); parent = node; } cpu_topo_probed = 1; } /* * Assign logical CPU IDs to local APICs. */ void assign_cpu_ids(void) { struct topo_node *node; u_int smt_mask; int nhyper; smt_mask = (1u << core_id_shift) - 1; /* * Assign CPU IDs to local APIC IDs and disable any CPUs * beyond MAXCPU. CPU 0 is always assigned to the BSP. */ mp_ncpus = 0; nhyper = 0; TOPO_FOREACH(node, &topo_root) { if (node->type != TOPO_TYPE_PU) continue; if ((node->hwid & smt_mask) != (boot_cpu_id & smt_mask)) cpu_info[node->hwid].cpu_hyperthread = 1; if (resource_disabled("lapic", node->hwid)) { if (node->hwid != boot_cpu_id) cpu_info[node->hwid].cpu_disabled = 1; else printf("Cannot disable BSP, APIC ID = %d\n", node->hwid); } if (!hyperthreading_allowed && cpu_info[node->hwid].cpu_hyperthread) cpu_info[node->hwid].cpu_disabled = 1; if (mp_ncpus >= MAXCPU) cpu_info[node->hwid].cpu_disabled = 1; if (cpu_info[node->hwid].cpu_disabled) { disabled_cpus++; continue; } if (cpu_info[node->hwid].cpu_hyperthread) nhyper++; cpu_apic_ids[mp_ncpus] = node->hwid; apic_cpuids[node->hwid] = mp_ncpus; topo_set_pu_id(node, mp_ncpus); mp_ncpus++; } KASSERT(mp_maxid >= mp_ncpus - 1, ("%s: counters out of sync: max %d, count %d", __func__, mp_maxid, mp_ncpus)); mp_ncores = mp_ncpus - nhyper; smp_threads_per_core = mp_ncpus / mp_ncores; } /* * Print various information about the SMP system hardware and setup. */ void cpu_mp_announce(void) { struct topo_node *node; const char *hyperthread; struct topo_analysis topology; printf("FreeBSD/SMP: "); if (topo_analyze(&topo_root, 1, &topology)) { printf("%d package(s)", topology.entities[TOPO_LEVEL_PKG]); if (topology.entities[TOPO_LEVEL_GROUP] > 1) printf(" x %d groups", topology.entities[TOPO_LEVEL_GROUP]); if (topology.entities[TOPO_LEVEL_CACHEGROUP] > 1) printf(" x %d cache groups", topology.entities[TOPO_LEVEL_CACHEGROUP]); if (topology.entities[TOPO_LEVEL_CORE] > 0) printf(" x %d core(s)", topology.entities[TOPO_LEVEL_CORE]); if (topology.entities[TOPO_LEVEL_THREAD] > 1) printf(" x %d hardware threads", topology.entities[TOPO_LEVEL_THREAD]); } else { printf("Non-uniform topology"); } printf("\n"); if (disabled_cpus) { printf("FreeBSD/SMP Online: "); if (topo_analyze(&topo_root, 0, &topology)) { printf("%d package(s)", topology.entities[TOPO_LEVEL_PKG]); if (topology.entities[TOPO_LEVEL_GROUP] > 1) printf(" x %d groups", topology.entities[TOPO_LEVEL_GROUP]); if (topology.entities[TOPO_LEVEL_CACHEGROUP] > 1) printf(" x %d cache groups", topology.entities[TOPO_LEVEL_CACHEGROUP]); if (topology.entities[TOPO_LEVEL_CORE] > 0) printf(" x %d core(s)", topology.entities[TOPO_LEVEL_CORE]); if (topology.entities[TOPO_LEVEL_THREAD] > 1) printf(" x %d hardware threads", topology.entities[TOPO_LEVEL_THREAD]); } else { printf("Non-uniform topology"); } printf("\n"); } if (!bootverbose) return; TOPO_FOREACH(node, &topo_root) { switch (node->type) { case TOPO_TYPE_PKG: printf("Package HW ID = %u\n", node->hwid); break; case TOPO_TYPE_CORE: printf("\tCore HW ID = %u\n", node->hwid); break; case TOPO_TYPE_PU: if (cpu_info[node->hwid].cpu_hyperthread) hyperthread = "/HT"; else hyperthread = ""; if (node->subtype == 0) printf("\t\tCPU (AP%s): APIC ID: %u" "(disabled)\n", hyperthread, node->hwid); else if (node->id == 0) printf("\t\tCPU0 (BSP): APIC ID: %u\n", node->hwid); else printf("\t\tCPU%u (AP%s): APIC ID: %u\n", node->id, hyperthread, node->hwid); break; default: /* ignored */ break; } } } /* * Add a scheduling group, a group of logical processors sharing * a particular cache (and, thus having an affinity), to the scheduling * topology. * This function recursively works on lower level caches. */ static void x86topo_add_sched_group(struct topo_node *root, struct cpu_group *cg_root) { struct topo_node *node; int nchildren; int ncores; int i; KASSERT(root->type == TOPO_TYPE_SYSTEM || root->type == TOPO_TYPE_CACHE || root->type == TOPO_TYPE_NODE || root->type == TOPO_TYPE_GROUP, ("x86topo_add_sched_group: bad type: %u", root->type)); CPU_COPY(&root->cpuset, &cg_root->cg_mask); cg_root->cg_count = root->cpu_count; if (root->type == TOPO_TYPE_CACHE) cg_root->cg_level = root->subtype; else cg_root->cg_level = CG_SHARE_NONE; if (root->type == TOPO_TYPE_NODE) cg_root->cg_flags = CG_FLAG_NODE; else cg_root->cg_flags = 0; +#if defined(CPUGRP_SCORE) + /* + * Set default performance/efficiency score. + */ + memset(cg_root->cg_score, CG_SCORE_DEFAULT, sizeof(cg_root->cg_score)); +#endif + /* * Check how many core nodes we have under the given root node. * If we have multiple logical processors, but not multiple * cores, then those processors must be hardware threads. */ ncores = 0; node = root; while (node != NULL) { if (node->type != TOPO_TYPE_CORE) { node = topo_next_node(root, node); continue; } ncores++; node = topo_next_nonchild_node(root, node); } if (cg_root->cg_level != CG_SHARE_NONE && root->cpu_count > 1 && ncores < 2) cg_root->cg_flags |= CG_FLAG_SMT; /* * Find out how many cache nodes we have under the given root node. * We ignore cache nodes that cover all the same processors as the * root node. Also, we do not descend below found cache nodes. * That is, we count top-level "non-redundant" caches under the root * node. */ nchildren = 0; node = root; while (node != NULL) { /* * When some APICs are disabled by tunables, nodes can end up * with an empty cpuset. Nodes with an empty cpuset will be * translated into cpu groups with empty cpusets. smp_topo_fill * will then set cg_first and cg_last to -1. This isn't * correctly handled in all functions. E.g. when * cpu_search_lowest and cpu_search_highest loop through all * cpus, they call CPU_ISSET on cpu -1 which ends up in a * general protection fault. * * We could fix the scheduler to handle empty cpu groups * correctly. Nevertheless, empty cpu groups are causing * overhead for no value. So, it makes more sense to just don't * create them. */ if (CPU_EMPTY(&node->cpuset)) { node = topo_next_node(root, node); continue; } if (CPU_CMP(&node->cpuset, &root->cpuset) == 0) { if (node->type == TOPO_TYPE_CACHE && cg_root->cg_level < node->subtype) cg_root->cg_level = node->subtype; if (node->type == TOPO_TYPE_NODE) cg_root->cg_flags |= CG_FLAG_NODE; node = topo_next_node(root, node); continue; } if (node->type != TOPO_TYPE_GROUP && node->type != TOPO_TYPE_NODE && node->type != TOPO_TYPE_CACHE) { node = topo_next_node(root, node); continue; } nchildren++; node = topo_next_nonchild_node(root, node); } /* * We are not interested in nodes including only one CPU each. */ if (nchildren == root->cpu_count) return; /* * We are not interested in nodes without children. */ cg_root->cg_children = nchildren; if (nchildren == 0) return; cg_root->cg_child = smp_topo_alloc(nchildren); /* * Now find again the same cache nodes as above and recursively * build scheduling topologies for them. */ node = root; i = 0; while (node != NULL) { if ((node->type != TOPO_TYPE_GROUP && node->type != TOPO_TYPE_NODE && node->type != TOPO_TYPE_CACHE) || CPU_CMP(&node->cpuset, &root->cpuset) == 0 || CPU_EMPTY(&node->cpuset)) { node = topo_next_node(root, node); continue; } cg_root->cg_child[i].cg_parent = cg_root; x86topo_add_sched_group(node, &cg_root->cg_child[i]); i++; node = topo_next_nonchild_node(root, node); } } /* * Build the MI scheduling topology from the discovered hardware topology. */ struct cpu_group * cpu_topo(void) { struct cpu_group *cg_root; if (mp_ncpus <= 1) return (smp_topo_none()); cg_root = smp_topo_alloc(1); x86topo_add_sched_group(&topo_root, cg_root); return (cg_root); } static void cpu_alloc(void *dummy __unused) { /* * Dynamically allocate the arrays that depend on the * maximum APIC ID. */ cpu_info = malloc(sizeof(*cpu_info) * (max_apic_id + 1), M_CPUS, M_WAITOK | M_ZERO); apic_cpuids = malloc(sizeof(*apic_cpuids) * (max_apic_id + 1), M_CPUS, M_WAITOK | M_ZERO); } SYSINIT(cpu_alloc, SI_SUB_CPU, SI_ORDER_FIRST, cpu_alloc, NULL); /* * Add a logical CPU to the topology. */ void cpu_add(u_int apic_id, char boot_cpu) { if (apic_id > max_apic_id) panic("SMP: APIC ID %d too high", apic_id); KASSERT(cpu_info[apic_id].cpu_present == 0, ("CPU %u added twice", apic_id)); cpu_info[apic_id].cpu_present = 1; if (boot_cpu) { KASSERT(boot_cpu_id == -1, ("CPU %u claims to be BSP, but CPU %u already is", apic_id, boot_cpu_id)); boot_cpu_id = apic_id; cpu_info[apic_id].cpu_bsp = 1; } if (bootverbose) printf("SMP: Added CPU %u (%s)\n", apic_id, boot_cpu ? "BSP" : "AP"); } void cpu_mp_setmaxid(void) { /* * mp_ncpus and mp_maxid should be already set by calls to cpu_add(). * If there were no calls to cpu_add() assume this is a UP system. */ if (mp_ncpus == 0) mp_ncpus = 1; } int cpu_mp_probe(void) { /* * Always record BSP in CPU map so that the mbuf init code works * correctly. */ CPU_SETOF(0, &all_cpus); return (mp_ncpus > 1); } /* * AP CPU's call this to initialize themselves. */ void init_secondary_tail(void) { u_int cpuid; pmap_activate_boot(vmspace_pmap(proc0.p_vmspace)); /* * On real hardware, switch to x2apic mode if possible. Do it * after aps_ready was signalled, to avoid manipulating the * mode while BSP might still want to send some IPI to us * (second startup IPI is ignored on modern hardware etc). */ lapic_xapic_mode(); /* Initialize the PAT MSR. */ pmap_init_pat(); /* set up CPU registers and state */ cpu_setregs(); /* set up SSE/NX */ initializecpu(); /* set up FPU state on the AP */ #ifdef __amd64__ fpuinit(); #else npxinit(false); #endif if (cpu_ops.cpu_init) cpu_ops.cpu_init(); /* A quick check from sanity claus */ cpuid = PCPU_GET(cpuid); if (PCPU_GET(apic_id) != lapic_id()) { printf("SMP: cpuid = %d\n", cpuid); printf("SMP: actual apic_id = %d\n", lapic_id()); printf("SMP: correct apic_id = %d\n", PCPU_GET(apic_id)); panic("cpuid mismatch! boom!!"); } /* Initialize curthread. */ KASSERT(PCPU_GET(idlethread) != NULL, ("no idle thread")); PCPU_SET(curthread, PCPU_GET(idlethread)); schedinit_ap(); mtx_lock_spin(&ap_boot_mtx); mca_init(); /* Init local apic for irq's */ lapic_setup(1); /* Set memory range attributes for this CPU to match the BSP */ mem_range_AP_init(); smp_cpus++; CTR1(KTR_SMP, "SMP: AP CPU #%d Launched", cpuid); if (bootverbose) printf("SMP: AP CPU #%d Launched!\n", cpuid); else printf("%s%d%s", smp_cpus == 2 ? "Launching APs: " : "", cpuid, smp_cpus == mp_ncpus ? "\n" : " "); /* Determine if we are a logical CPU. */ if (cpu_info[PCPU_GET(apic_id)].cpu_hyperthread) CPU_SET(cpuid, &logical_cpus_mask); if (bootverbose) lapic_dump("AP"); if (smp_cpus == mp_ncpus) { /* enable IPI's, tlb shootdown, freezes etc */ atomic_store_rel_int(&smp_started, 1); } #ifdef __amd64__ if (pmap_pcid_enabled) load_cr4(rcr4() | CR4_PCIDE); load_ds(_udatasel); load_es(_udatasel); load_fs(_ufssel); #endif mtx_unlock_spin(&ap_boot_mtx); /* Wait until all the AP's are up. */ while (atomic_load_acq_int(&smp_started) == 0) ia32_pause(); kcsan_cpu_init(cpuid); sched_ap_entry(); panic("scheduler returned us to %s", __func__); /* NOTREACHED */ } static void smp_after_idle_runnable(void *arg __unused) { int cpu; if (mp_ncpus == 1) return; KASSERT(smp_started != 0, ("%s: SMP not started yet", __func__)); /* * Wait for all APs to handle an interrupt. After that, we know that * the APs have entered the scheduler at least once, so the boot stacks * are safe to free. */ smp_rendezvous(smp_no_rendezvous_barrier, NULL, smp_no_rendezvous_barrier, NULL); for (cpu = 1; cpu < mp_ncpus; cpu++) { kmem_free(bootstacks[cpu], kstack_pages * PAGE_SIZE); } } SYSINIT(smp_after_idle_runnable, SI_SUB_SMP, SI_ORDER_ANY, smp_after_idle_runnable, NULL); /* * We tell the I/O APIC code about all the CPUs we want to receive * interrupts. If we don't want certain CPUs to receive IRQs we * can simply not tell the I/O APIC code about them in this function. * We also do not tell it about the BSP since it tells itself about * the BSP internally to work with UP kernels and on UP machines. */ void set_interrupt_apic_ids(void) { u_int i, apic_id; for (i = 0; i < MAXCPU; i++) { apic_id = cpu_apic_ids[i]; if (apic_id == -1) continue; if (cpu_info[apic_id].cpu_bsp) continue; if (cpu_info[apic_id].cpu_disabled) continue; if (intr_apic_id_limit >= 0 && apic_id > intr_apic_id_limit) continue; /* Don't let hyperthreads service interrupts. */ if (cpu_info[apic_id].cpu_hyperthread && !hyperthreading_intr_allowed) continue; intr_add_cpu(i); } } #ifdef COUNT_XINVLTLB_HITS u_int xhits_gbl[MAXCPU]; u_int xhits_pg[MAXCPU]; u_int xhits_rng[MAXCPU]; static SYSCTL_NODE(_debug, OID_AUTO, xhits, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, ""); SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, global, CTLFLAG_RW, &xhits_gbl, sizeof(xhits_gbl), "IU", ""); SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, page, CTLFLAG_RW, &xhits_pg, sizeof(xhits_pg), "IU", ""); SYSCTL_OPAQUE(_debug_xhits, OID_AUTO, range, CTLFLAG_RW, &xhits_rng, sizeof(xhits_rng), "IU", ""); u_int ipi_global; u_int ipi_page; u_int ipi_range; u_int ipi_range_size; SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_global, CTLFLAG_RW, &ipi_global, 0, ""); SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_page, CTLFLAG_RW, &ipi_page, 0, ""); SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_range, CTLFLAG_RW, &ipi_range, 0, ""); SYSCTL_INT(_debug_xhits, OID_AUTO, ipi_range_size, CTLFLAG_RW, &ipi_range_size, 0, ""); #endif /* COUNT_XINVLTLB_HITS */ /* * Init and startup IPI. */ void ipi_startup(int apic_id, int vector) { /* * This attempts to follow the algorithm described in the * Intel Multiprocessor Specification v1.4 in section B.4. * For each IPI, we allow the local APIC ~20us to deliver the * IPI. If that times out, we panic. */ /* * first we do an INIT IPI: this INIT IPI might be run, resetting * and running the target CPU. OR this INIT IPI might be latched (P5 * bug), CPU waiting for STARTUP IPI. OR this INIT IPI might be * ignored. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_LEVEL | APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_INIT, apic_id); lapic_ipi_wait(100); /* Explicitly deassert the INIT IPI. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_LEVEL | APIC_LEVEL_DEASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_INIT, apic_id); DELAY(10000); /* wait ~10mS */ /* * next we do a STARTUP IPI: the previous INIT IPI might still be * latched, (P5 bug) this 1st STARTUP would then terminate * immediately, and the previously started INIT IPI would continue. OR * the previous INIT IPI has already run. and this STARTUP IPI will * run. OR the previous INIT IPI was ignored. and this STARTUP IPI * will run. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE | APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_STARTUP | vector, apic_id); if (!lapic_ipi_wait(100)) panic("Failed to deliver first STARTUP IPI to APIC %d", apic_id); DELAY(200); /* wait ~200uS */ /* * finally we do a 2nd STARTUP IPI: this 2nd STARTUP IPI should run IF * the previous STARTUP IPI was cancelled by a latched INIT IPI. OR * this STARTUP IPI will be ignored, as only ONE STARTUP IPI is * recognized after hardware RESET or INIT IPI. */ lapic_ipi_raw(APIC_DEST_DESTFLD | APIC_TRIGMOD_EDGE | APIC_LEVEL_ASSERT | APIC_DESTMODE_PHY | APIC_DELMODE_STARTUP | vector, apic_id); if (!lapic_ipi_wait(100)) panic("Failed to deliver second STARTUP IPI to APIC %d", apic_id); DELAY(200); /* wait ~200uS */ } static bool ipi_bitmap_set(int cpu, u_int ipi) { u_int bitmap, old, new; u_int *cpu_bitmap; bitmap = 1 << ipi; cpu_bitmap = &cpuid_to_pcpu[cpu]->pc_ipi_bitmap; old = *cpu_bitmap; for (;;) { if ((old & bitmap) != 0) break; new = old | bitmap; if (atomic_fcmpset_int(cpu_bitmap, &old, new)) break; } return (old != 0); } /* * Send an IPI to specified CPU handling the bitmap logic. */ static void ipi_send_cpu(int cpu, u_int ipi) { KASSERT((u_int)cpu < MAXCPU && cpu_apic_ids[cpu] != -1, ("IPI to non-existent CPU %d", cpu)); if (IPI_IS_BITMAPED(ipi)) { if (ipi_bitmap_set(cpu, ipi)) return; ipi = IPI_BITMAP_VECTOR; } lapic_ipi_vectored(ipi, cpu_apic_ids[cpu]); } void ipi_bitmap_handler(struct trapframe frame) { struct trapframe *oldframe; struct thread *td; int cpu = PCPU_GET(cpuid); u_int ipi_bitmap; kasan_mark(&frame, sizeof(frame), sizeof(frame), 0); td = curthread; ipi_bitmap = atomic_readandclear_int(&cpuid_to_pcpu[cpu]-> pc_ipi_bitmap); /* * sched_preempt() must be called to clear the pending preempt * IPI to enable delivery of further preempts. However, the * critical section will cause extra scheduler lock thrashing * when used unconditionally. Only critical_enter() if * hardclock must also run, which requires the section entry. */ if (ipi_bitmap & (1 << IPI_HARDCLOCK)) critical_enter(); td->td_intr_nesting_level++; oldframe = td->td_intr_frame; td->td_intr_frame = &frame; #if defined(STACK) || defined(DDB) if (ipi_bitmap & (1 << IPI_TRACE)) stack_capture_intr(); #endif if (ipi_bitmap & (1 << IPI_PREEMPT)) { #ifdef COUNT_IPIS (*ipi_preempt_counts[cpu])++; #endif sched_preempt(td); } if (ipi_bitmap & (1 << IPI_AST)) { #ifdef COUNT_IPIS (*ipi_ast_counts[cpu])++; #endif /* Nothing to do for AST */ } if (ipi_bitmap & (1 << IPI_HARDCLOCK)) { #ifdef COUNT_IPIS (*ipi_hardclock_counts[cpu])++; #endif hardclockintr(); } td->td_intr_frame = oldframe; td->td_intr_nesting_level--; if (ipi_bitmap & (1 << IPI_HARDCLOCK)) critical_exit(); } /* * send an IPI to a set of cpus. */ void ipi_selected(cpuset_t cpus, u_int ipi) { int cpu; /* * IPI_STOP_HARD maps to a NMI and the trap handler needs a bit * of help in order to understand what is the source. * Set the mask of receiving CPUs for this purpose. */ if (ipi == IPI_STOP_HARD) CPU_OR_ATOMIC(&ipi_stop_nmi_pending, &cpus); CPU_FOREACH_ISSET(cpu, &cpus) { CTR3(KTR_SMP, "%s: cpu: %d ipi: %x", __func__, cpu, ipi); ipi_send_cpu(cpu, ipi); } } /* * send an IPI to a specific CPU. */ void ipi_cpu(int cpu, u_int ipi) { /* * IPI_STOP_HARD maps to a NMI and the trap handler needs a bit * of help in order to understand what is the source. * Set the mask of receiving CPUs for this purpose. */ if (ipi == IPI_STOP_HARD) CPU_SET_ATOMIC(cpu, &ipi_stop_nmi_pending); CTR3(KTR_SMP, "%s: cpu: %d ipi: %x", __func__, cpu, ipi); ipi_send_cpu(cpu, ipi); } /* * send an IPI to all CPUs EXCEPT myself */ void ipi_all_but_self(u_int ipi) { cpuset_t other_cpus; int cpu, c; /* * IPI_STOP_HARD maps to a NMI and the trap handler needs a bit * of help in order to understand what is the source. * Set the mask of receiving CPUs for this purpose. */ if (ipi == IPI_STOP_HARD) { other_cpus = all_cpus; CPU_CLR(PCPU_GET(cpuid), &other_cpus); CPU_OR_ATOMIC(&ipi_stop_nmi_pending, &other_cpus); } CTR2(KTR_SMP, "%s: ipi: %x", __func__, ipi); if (IPI_IS_BITMAPED(ipi)) { cpu = PCPU_GET(cpuid); CPU_FOREACH(c) { if (c != cpu) ipi_bitmap_set(c, ipi); } ipi = IPI_BITMAP_VECTOR; } lapic_ipi_vectored(ipi, APIC_IPI_DEST_OTHERS); } void ipi_self_from_nmi(u_int vector) { lapic_ipi_vectored(vector, APIC_IPI_DEST_SELF); /* Wait for IPI to finish. */ if (!lapic_ipi_wait(50000)) { if (KERNEL_PANICKED()) return; else panic("APIC: IPI is stuck"); } } int ipi_nmi_handler(void) { u_int cpuid; /* * As long as there is not a simple way to know about a NMI's * source, if the bitmask for the current CPU is present in * the global pending bitword an IPI_STOP_HARD has been issued * and should be handled. */ cpuid = PCPU_GET(cpuid); if (!CPU_ISSET(cpuid, &ipi_stop_nmi_pending)) return (1); CPU_CLR_ATOMIC(cpuid, &ipi_stop_nmi_pending); cpustop_handler(); return (0); } int nmi_kdb_lock; void nmi_call_kdb_smp(u_int type, struct trapframe *frame) { int cpu; bool call_post; cpu = PCPU_GET(cpuid); if (atomic_cmpset_acq_int(&nmi_kdb_lock, 0, 1)) { nmi_call_kdb(cpu, type, frame); call_post = false; } else { savectx(&stoppcbs[cpu]); CPU_SET_ATOMIC(cpu, &stopped_cpus); while (!atomic_cmpset_acq_int(&nmi_kdb_lock, 0, 1)) ia32_pause(); call_post = true; } atomic_store_rel_int(&nmi_kdb_lock, 0); if (call_post) cpustop_handler_post(cpu); } /* * Handle an IPI_STOP by saving our current context and spinning (or mwaiting, * if available) until we are resumed. */ void cpustop_handler(void) { struct monitorbuf *mb; u_int cpu; bool use_mwait; cpu = PCPU_GET(cpuid); savectx(&stoppcbs[cpu]); use_mwait = (stop_mwait && (cpu_feature2 & CPUID2_MON) != 0 && !mwait_cpustop_broken); if (use_mwait) { mb = PCPU_PTR(monitorbuf); atomic_store_int(&mb->stop_state, MONITOR_STOPSTATE_STOPPED); } /* Indicate that we are stopped */ CPU_SET_ATOMIC(cpu, &stopped_cpus); /* Wait for restart */ while (!CPU_ISSET(cpu, &started_cpus)) { if (use_mwait) { cpu_monitor(mb, 0, 0); if (atomic_load_int(&mb->stop_state) == MONITOR_STOPSTATE_STOPPED) cpu_mwait(0, MWAIT_C1); continue; } ia32_pause(); /* * Halt non-BSP CPUs on panic -- we're never going to need them * again, and might as well save power / release resources * (e.g., overprovisioned VM infrastructure). */ while (__predict_false(!IS_BSP() && KERNEL_PANICKED())) halt(); } cpustop_handler_post(cpu); } static void cpustop_handler_post(u_int cpu) { CPU_CLR_ATOMIC(cpu, &started_cpus); CPU_CLR_ATOMIC(cpu, &stopped_cpus); /* * We don't broadcast TLB invalidations to other CPUs when they are * stopped. Hence, we clear the TLB before resuming. */ invltlb_glob(); #if defined(__amd64__) && (defined(DDB) || defined(GDB)) amd64_db_resume_dbreg(); #endif if (cpu == 0 && cpustop_restartfunc != NULL) { cpustop_restartfunc(); cpustop_restartfunc = NULL; } } /* * Handle an IPI_SUSPEND by saving our current context and spinning until we * are resumed. */ void cpususpend_handler(void) { u_int cpu; mtx_assert(&smp_ipi_mtx, MA_NOTOWNED); cpu = PCPU_GET(cpuid); #ifdef XENHVM /* * Some Xen guest types (PVH) expose a very minimal set of ACPI tables, * and for example have no support for SCI. That leads to the suspend * stacks not being allocated, and hence when attempting to perform a * Xen triggered suspension FreeBSD will hit a #PF. Avoid saving the * CPU and FPU contexts if the stacks are not allocated, as the * hypervisor will already take care of this. Note that we could even * do this for Xen triggered suspensions on guests that have full ACPI * support, but doing so would introduce extra complexity. */ if (susppcbs == NULL) { KASSERT(vm_guest == VM_GUEST_XEN, ("Missing suspend stack")); CPU_SET_ATOMIC(cpu, &suspended_cpus); CPU_SET_ATOMIC(cpu, &resuming_cpus); } else #endif if (savectx(&susppcbs[cpu]->sp_pcb)) { #ifdef __amd64__ fpususpend(susppcbs[cpu]->sp_fpususpend); #else npxsuspend(susppcbs[cpu]->sp_fpususpend); #endif /* * suspended_cpus is cleared shortly after each AP is restarted * by a Startup IPI, so that the BSP can proceed to restarting * the next AP. * * resuming_cpus gets cleared when the AP completes * initialization after having been released by the BSP. * resuming_cpus is probably not the best name for the * variable, because it is actually a set of processors that * haven't resumed yet and haven't necessarily started resuming. * * Note that suspended_cpus is meaningful only for ACPI suspend * as it's not really used for Xen suspend since the APs are * automatically restored to the running state and the correct * context. For the same reason resumectx is never called in * that case. */ CPU_SET_ATOMIC(cpu, &suspended_cpus); CPU_SET_ATOMIC(cpu, &resuming_cpus); /* * Invalidate the cache after setting the global status bits. * The last AP to set its bit may end up being an Owner of the * corresponding cache line in MOESI protocol. The AP may be * stopped before the cache line is written to the main memory. */ wbinvd(); } else { #ifdef __amd64__ fpuresume(susppcbs[cpu]->sp_fpususpend); #else npxresume(susppcbs[cpu]->sp_fpususpend); #endif pmap_init_pat(); initializecpu(); PCPU_SET(switchtime, 0); PCPU_SET(switchticks, ticks); /* Indicate that we have restarted and restored the context. */ CPU_CLR_ATOMIC(cpu, &suspended_cpus); } /* Wait for resume directive */ while (!CPU_ISSET(cpu, &toresume_cpus)) ia32_pause(); /* Re-apply microcode updates. */ ucode_reload(); #ifdef __i386__ /* Finish removing the identity mapping of low memory for this AP. */ invltlb_glob(); #endif if (cpu_ops.cpu_resume) cpu_ops.cpu_resume(); #ifdef __amd64__ if (vmm_resume_p) vmm_resume_p(); #endif /* Resume MCA and local APIC */ lapic_xapic_mode(); mca_resume(); lapic_setup(0); /* Indicate that we are resumed */ CPU_CLR_ATOMIC(cpu, &resuming_cpus); CPU_CLR_ATOMIC(cpu, &suspended_cpus); CPU_CLR_ATOMIC(cpu, &toresume_cpus); } /* * Handle an IPI_SWI by waking delayed SWI thread. */ void ipi_swi_handler(struct trapframe frame) { intr_event_handle(clk_intr_event, &frame); } /* * This is called once the rest of the system is up and running and we're * ready to let the AP's out of the pen. */ static void release_aps(void *dummy __unused) { if (mp_ncpus == 1) return; atomic_store_rel_int(&aps_ready, 1); while (smp_started == 0) ia32_pause(); } SYSINIT(start_aps, SI_SUB_SMP, SI_ORDER_FIRST, release_aps, NULL); #ifdef COUNT_IPIS /* * Setup interrupt counters for IPI handlers. */ static void mp_ipi_intrcnt(void *dummy) { char buf[64]; int i; CPU_FOREACH(i) { snprintf(buf, sizeof(buf), "cpu%d:invltlb", i); intrcnt_add(buf, &ipi_invltlb_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:invlrng", i); intrcnt_add(buf, &ipi_invlrng_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:invlpg", i); intrcnt_add(buf, &ipi_invlpg_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:invlcache", i); intrcnt_add(buf, &ipi_invlcache_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:preempt", i); intrcnt_add(buf, &ipi_preempt_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:ast", i); intrcnt_add(buf, &ipi_ast_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:rendezvous", i); intrcnt_add(buf, &ipi_rendezvous_counts[i]); snprintf(buf, sizeof(buf), "cpu%d:hardclock", i); intrcnt_add(buf, &ipi_hardclock_counts[i]); } } SYSINIT(mp_ipi_intrcnt, SI_SUB_INTR, SI_ORDER_MIDDLE, mp_ipi_intrcnt, NULL); #endif