---<<BOOT>>---
VERBOSE_SYSINIT: DDB not enabled, symbol lookups disabled.
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #10 66c05af-c3(master)-dirty: Mon Mar  9 02:53:35 -03 2020
    root@powermac:/usr/obj/usr/src/powerpc.powerpc/sys/GENERIC powerpc
FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a213378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
VT(ofwfb): resolution 1280x854
cpu0: Motorola PowerPC 7447A revision 1.2, 832.43 MHz
cpu0: Features 9c000000<PPC32,ALTIVEC,FPU,MMU>
cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT>
real memory  = 1580265472 (1507 MB)
avail memory = 1530056704 (1459 MB)
random: unblocking device.
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree> on nexus0
unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on ofwbus0
unin0: Version 210
pcib0: <Apple UniNorth Host-PCI bridge> mem 0xf0000000-0xf1ffffff irq 45 on ofwbus0
pci0: <OFW PCI bus> on pcib0
pcib1: <Apple UniNorth Host-PCI bridge> mem 0xf2000000-0xf3ffffff irq 45 on ofwbus0
pci1: <OFW PCI bus> on pcib1
macio0: <Intrepid I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1
macgpio0: <MacIO GPIO Controller> mem 0x50-0x7f on macio0
pcib2: <Apple UniNorth Host-PCI bridge> mem 0xf4000000-0xf5ffffff irq 45 on ofwbus0
pci2: <OFW PCI bus> on pcib2
pmuextint0: <Apple PMU99 External Interrupt> extint-gpio 1 irq 47 on macgpio0
pmu0: <Apple PMU99 Controller> mem 0x16000-0x17fff irq 25 on macio0
pmu0: registered as a time-of-day clock, resolution 0.001000s
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on macio0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
dfs0: <Dynamic Frequency Switching> on cpu0
pmufreq0: <PMU-based frequency scaling> on cpu0
powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0
powermac_nvram0: bank0 generation 276, bank1 generation 277
WARNING: Device "powermac_nvram" is Giant locked and may be deleted before FreeBSD 13.0.
iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 42 on unin0
iicbus0: <OFW I2C bus> on iichb0
adt746x0: <Apple Thermostat Unit ADT746X> at addr 0x5c on iicbus0
ds17750: <Temp-Monitor DS1775> at addr 0x92 on iicbus0
iicbus0: <unknown card> at addr 0xb0
agp0: <Apple UniNorth 2 AGP Bridge> on hostb0
WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 13.0.
vgapci0: <VGA-compatible display> port 0x400-0x4ff mem 0xb8000000-0xbfffffff,0xb0000000-0xb000ffff irq 48 at device 16.0 on pci0
backlight0: <PowerBook backlight for ATI graphics> on vgapci0
vgapci0: Boot video device
vcoregpio0: <CPU Core Voltage Control> gpio 1 on macgpio0
scc0: <Zilog Z8530 dual channel SCC> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,5,6,23,7,8 on macio0
uart0: <z8530, channel A> on scc0
uart1: <z8530, channel B> on scc0
pcm0: <Apple I2S Audio Controller> mem 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 30,1,2,31,3,4 on macio0
iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 26 on macio0
iicbus1: <OFW I2C bus> on iichb1
snapper0: <Texas Instruments TAS3004 Audio Codec> at addr 0x6a on iicbus1
ata0: <Apple MacIO ATA Controller> mem 0x20000-0x20fff,0x8800-0x88ff irq 24,12 on macio0
pci1: <network> at device 18.0 (no driver attached)
pci1: <bridge, PCI-CardBus> at device 19.0 (no driver attached)
ohci0: <Apple KeyLargo/Intrepid USB controller> mem 0xa0003000-0xa0003fff irq 29 at device 26.0 on pci1
usbus0 on ohci0
ohci1: <NEC uPD 9210 USB controller> mem 0xa0002000-0xa0002fff irq 63 at device 27.0 on pci1
usbus1 on ohci1
ohci2: <NEC uPD 9210 USB controller> mem 0xa0001000-0xa0001fff irq 63 at device 27.1 on pci1
usbus2 on ohci2
ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0xa0000000-0xa00000ff irq 63 at device 27.2 on pci1
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci3: <Apple KeyLargo/Intrepid USB controller> at device 25.0 on pci1
usbus4 on ohci3
ata1: <Intrepid Kauai ATA Controller> mem 0xf5004000-0xf5007fff irq 39 at device 13.0 on pci2
pci2: <serial bus, FireWire> at device 14.0 (no driver attached)
gem0: <Apple UniNorth2 GMAC Ethernet> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2
miibus0: <MII bus> on gem0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
gem0: 10kB RX FIFO, 4kB TX FIFO
gem0: Ethernet address: 00:11:24:cb:66:42
cryptosoft0: <software crypto> on nexus0
Timecounter "timebase" frequency 18432000 Hz quality 0
Event timer "decrementer" frequency 18432000 Hz quality 1000
Timecounters tick every 1.000 msec
Obsolete code will be removeusbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
d soon: random(9) is the obsolete Park-Miller LCG from 1988
ugen1.1: <NEC OHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Apple OHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen2.1: <NEC OHCI root HUB> at usbus2
uhub2 on usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <NEC EHCI root HUB> at usbus3
uhub3 on usbus3
uhub3: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 3 ports with 3 removable, self powered
usbus4: 12Mbps Full Speed USB v1.0
uhub1: 2 ports with 2 removable, self powered
ugen4.1: <Apple OHCI root HUB> at usbus4
uhub4 on usbus4
uhub4: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub2: 2 ports with 2 removable, self powered
adt746x0: Dev ID 0x68, Company ID 0x41, Rev ID 0x71 CNF: 0x5 CNF5: 0x1
adt746x0: 2 fans detected!
adt746x0: Sensor format: 1
adt746x0: 6 sensors detected!
ugen0.2: <vendor 0x05ac product 0x1000> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
kbd1 at ukbd0
Trying to mount root from ufs:/dev/ada0s3 [rw]...
Root mount waiting for: CAM usbus0 usbus3 usbus4
ada0 at ata1 bus 0 scbus1 target 0 lun 0
ada0: <Hitachi HTS541080G9AT00 MB4AA5AJ> ATA-6 device
ada0: Serial Number MPB450X6GHB8KC
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors)
ums0 on uhub1
ums0: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus0
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA DVD-R   UJ-845E DMP2> Removable CD-ROM SCSI device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub4: 2 ports with 2 removable, self powered
ums0: 5 buttons and [XY] coordinates ID=0
ugen0.3: <Apple Computer Apple Internal Keyboard/Trackpad> at usbus0
ukbd1 on uhub1
ukbd1: <Keyboard> on usbus0
kbd2 at ukbd1
atp0 on uhub1
atp_attach: device mode switch skipped: Fountain device
atp0: <Touchpad> on usbus0
uhid0 on uhub1
uhid0: <Consumer> on usbus0
Root mount waiting for: usbus3
uhub3: 5 ports with 5 removable, self powered
mountroot: waiting for device /dev/ada0s3...
warning: total configured swap (925459 pages) exceeds maximum recommended amount (748160 pages).
warning: increase kern.maxswzone or reduce amount of swap.
lo0: link state changed to UP