diff --git a/libexec/rc/rc.conf b/libexec/rc/rc.conf index f5d0605c8436..c92bb0135f4d 100644 --- a/libexec/rc/rc.conf +++ b/libexec/rc/rc.conf @@ -1,784 +1,784 @@ #!/bin/sh # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. You should # not edit this file! Put any overrides into one of the ${rc_conf_files} # instead and you will be able to update these defaults later without # spamming your local configuration information. # # The ${rc_conf_files} files should only contain values which override # values set in this file. This eases the upgrade path when defaults # are changed and new features are added. # # All arguments must be in double or single quotes. # # For a more detailed explanation of all the rc.conf variables, please # refer to the rc.conf(5) manual page. # ############################################################## ### Important initial Boot-time options #################### ############################################################## # Set default value of _localbase if not previously set : ${_localbase:="/usr/local"} # rc_debug can't be set here without interferring with rc.subr's setting it # when the kenv variable rc.debug is set. #rc_debug="NO" # Set to YES to enable debugging output from rc.d rc_info="NO" # Enables display of informational messages at boot. rc_startmsgs="YES" # Show "Starting foo:" messages at boot rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown early_late_divider="FILESYSTEMS" # Script that separates early/late # stages of the boot process. Make sure you know # the ramifications if you change this. # See rc.conf(5) for more details. always_force_depends="NO" # Set to check that indicated dependencies are # running during boot (can increase boot time). apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). apmd_enable="NO" # Run apmd to handle APM event from userland. apmd_flags="" # Flags to apmd (if enabled). ddb_enable="NO" # Set to YES to load ddb scripts at boot. ddb_config="/etc/ddb.conf" # ddb(8) config file. devd_enable="YES" # Run devd, to trigger programs on device tree changes. devd_flags="" # Additional flags for devd(8). devmatch_enable="YES" # Demand load kernel modules based on device ids. devmatch_blocklist="" # List of modules (w/o .ko) to exclude from devmatch. #kld_list="" # Kernel modules to load after local disks are mounted kldxref_enable="YES" # Build linker.hints files with kldxref(8). kldxref_clobber="NO" # Overwrite old linker.hints at boot. kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. powerd_enable="NO" # Run powerd to lower our power usage. powerd_flags="" # Flags to powerd (if enabled). tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never tmpsize="20m" # Size of mfs /tmp if created tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp utx_enable="YES" # Enable user accounting varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never varsize="32m" # Size of mfs /var if created varmfs_flags="-S" # Extra mount options for the mfs /var mfs_type="auto" # "md", "tmpfs", "auto" to prefer tmpfs with md as fallback populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never cleanvar_enable="YES" # Clean the /var directory var_run_enable="NO" # Save/restore /var/run structure at shutdown/reboot var_run_autosave="NO" # Only restore /var/run structure at shutdown/reboot # The user is expected to issue service var_run save to # manually save the /var/run mtree var_run_mtree="/var/db/mtree/BSD.var-run.mtree" # Where to save /var/run mtree local_startup="${_localbase}/etc/rc.d" # startup script dirs. script_name_sep=" " # Change if your startup scripts' names contain spaces rc_conf_files="/etc/rc.conf /etc/rc.conf.local" # ZFS support zfs_enable="NO" # Set to YES to automatically mount ZFS file systems zfskeys_enable="NO" # Set YES to autoload ZFS encryption keys zfs_bootonce_activate="NO" # Set YES to make successful bootonce BE permanent zpool_reguid="" # Set to zpools for which the GUID should be replaced # upon first boot. zpool_upgrade="" # Set to zpools for which the version should be upgraded # upon first boot. # ZFSD support zfsd_enable="NO" # Set to YES to automatically start the ZFS fault # management daemon. gptboot_enable="YES" # GPT boot success/failure reporting. # Experimental - test before enabling gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab gbde_devices="NO" # Devices to automatically attach (list, or AUTO) gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices gbde_lockdir="/etc" # Where to look for gbde lockfiles # GELI disk encryption configuration. geli_devices="" # List of devices to automatically attach in addition to # GELI devices listed in /etc/fstab. geli_groups="" # List of groups containing devices to automatically # attach with the same keyfiles and passphrase geli_tries="" # Number of times to attempt attaching geli device. # If empty, kern.geom.eli.tries will be used. geli_default_flags="" # Default flags for geli(8). geli_autodetach="YES" # Automatically detach on last close. # Providers are marked as such when all file systems are # mounted. # Example use. #geli_devices="da1 mirror/home" #geli_da1_flags="-p -k /etc/geli/da1.keys" #geli_da1_autodetach="NO" #geli_mirror_home_flags="-k /etc/geli/home.keys" #geli_groups="storage backup" #geli_storage_flags="-k /etc/geli/storage.keys" #geli_storage_devices="ada0 ada1" #geli_backup_flags="-j /etc/geli/backup.passfile -k /etc/geli/backup.keys" #geli_backup_devices="ada2 ada3" root_rw_mount="YES" # Set to NO to inhibit remounting root read-write. root_hold_delay="30" # Time to wait for root mount hold release. fsck_flags="-p" # May be changed to -f (or -f -y) to force a full fsck fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. fsck_y_flags="-T ffs:-R -T ufs:-R" # Additional flags for fsck -y background_fsck="YES" # Attempt to run fsck in the background where possible. background_fsck_delay="60" # Time to wait (seconds) before starting the fsck. growfs_enable="NO" # Set to YES to attempt to grow the root filesystem on boot growfs_swap_size="" # Set to 0 to disable growfs swap, "" to default size, # size in bytes to specify swap size. netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. extra_netfs_types="NO" # List of network extra filesystem types for delayed # mount at startup (or NO). ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network and firewall/security options: ### hostname="" # Set this! hostid_enable="YES" # Set host UUID. hostid_file="/etc/hostid" # File with hostuuid. hostid_uuidgen_flags="-r" # Flags to uuidgen. machine_id_file="/etc/machine-id" # File with machine-id. nisdomainname="NO" # Set to NIS domain if using NIS (or NO). dhclient_program="/sbin/dhclient" # Path to dhcp client program. dhclient_flags="" # Extra flags to pass to dhcp client. #dhclient_flags_em0="" # Extra dhclient flags for em0 only background_dhclient="NO" # Start dhcp client in the background. #background_dhclient_em0="YES" # Start dhcp client on em0 in the background. synchronous_dhclient="NO" # Start dhclient directly on configured # interfaces during startup. defaultroute_delay="30" # Time to wait for a default route on a DHCP interface. defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route. netif_enable="YES" # Set to YES to initialize network interfaces netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec. wpa_supplicant_program="/usr/sbin/wpa_supplicant" wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant wpa_supplicant_conf_file="/etc/wpa_supplicant.conf" # firewall_enable="NO" # Set to YES to enable firewall functionality firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display firewall_logging="NO" # Set to YES to enable events logging firewall_logif="NO" # Set to YES to create logging-pseudo interface firewall_flags="" # Flags passed to ipfw when type is a file firewall_coscripts="" # List of executables/scripts to run after # firewall starts/stops firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client" # firewall. #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for # "client" firewall. firewall_simple_iif="em1" # Inside network interface for "simple" # firewall. firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple" # firewall. firewall_simple_oif="em0" # Outside network interface for "simple" # firewall. firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple" # firewall. #firewall_simple_iif_ipv6="em1" # Inside IPv6 network interface for "simple" # firewall. #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix # for "simple" firewall. #firewall_simple_oif_ipv6="em0" # Outside IPv6 network interface for "simple" # firewall. #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix # for "simple" firewall. firewall_myservices="" # List of ports/protocols on which this host # offers services for "workstation" firewall. firewall_allowservices="" # List of IPs which have access to # $firewall_myservices for "workstation" # firewall. firewall_trusted="" # List of IPs which have full access to this # host for "workstation" firewall. firewall_logdeny="NO" # Set to YES to log default denied incoming # packets for "workstation" firewall. firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports # for which denied incoming packets are not # logged for "workstation" firewall. firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES) firewall_nat_interface="" # Public interface or IPaddress to use firewall_nat_flags="" # Additional configuration parameters firewall_nat64_enable="NO" # Enable kernel NAT64 module. firewall_nptv6_enable="NO" # Enable kernel NPTv6 module. firewall_pmod_enable="NO" # Enable kernel protocols modification module. dummynet_enable="NO" # Load the dummynet(4) module ipfw_netflow_enable="NO" # Enable netflow logging via ng_netflow ip_portrange_first="NO" # Set first dynamically allocated port ip_portrange_last="NO" # Set last dynamically allocated port ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd) ike_program="${_localbase}/sbin/isakmpd" # Path to IKE daemon ike_flags="" # Additional flags for IKE daemon ipsec_enable="NO" # Set to YES to run setkey on ipsec_file ipsec_file="/etc/ipsec.conf" # Name of config file for setkey natd_program="/sbin/natd" # path to natd, if you want a different one. natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="" # Public interface or IPaddress to use. natd_flags="" # Additional flags for natd. ipfilter_enable="NO" # Set to YES to enable ipfilter functionality ipfilter_program="/sbin/ipf" # where the ipfilter program lives ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see # /usr/src/contrib/ipfilter/rules for examples ipfilter_flags="" # additional flags for ipfilter ippool_enable="NO" # Set to YES to enable ip filter pools ippool_program="/sbin/ippool" # where the ippool program lives ippool_rules="/etc/ippool.tables" # rules definition file for ippool ippool_flags="" # additional flags for ippool ipnat_enable="NO" # Set to YES to enable ipnat functionality ipnat_program="/sbin/ipnat" # where the ipnat program lives ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat ipnat_flags="" # additional flags for ipnat ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" ipfs_enable="NO" # Set to YES to enable saving and restoring # of state tables at shutdown and boot ipfs_program="/sbin/ipfs" # where the ipfs program lives ipfs_flags="" # additional flags for ipfs pf_enable="NO" # Set to YES to enable packet filter (pf) pf_rules="/etc/pf.conf" # rules definition file for pf (nonexistent # by default) pf_program="/sbin/pfctl" # where the pfctl program lives pf_flags="" # additional flags for pfctl pf_fallback_rules_enable="NO" # fallback if loading ruleset fails pf_fallback_rules="block drop log all" # rules to load on pf ruleset failure #pf_fallback_rules="block drop log all #pass quick on em4" # multi-rule pf_fallback_rules_file="/etc/pf-fallback.conf" # rules file on ruleset failure pflog_enable="NO" # Set to YES to enable packet filter logging pflog_logfile="/var/log/pflog" # where pflogd should store the logfile pflog_program="/sbin/pflogd" # where the pflogd program lives pflog_flags="" # additional flags for pflogd dnctl_enable="NO" dnctl_program="/sbin/dnctl" dnctl_rules="/etc/dnctl.conf" ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf ftpproxy_flags="" # additional flags for ftp-proxy(8) pfsync_enable="NO" # Expose pf state to other hosts for syncing pfsync_syncdev="" # Interface for pfsync to work through pfsync_syncpeer="" # IP address of pfsync peer host pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. log_in_vain="0" # >=1 to log connects to ports w/o listeners. tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN # NOTE: this violates the TCP specification icmp_drop_redirect="auto" # Set to YES to ignore ICMP REDIRECT packets icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets network_interfaces="auto" # List of network interfaces (or "auto"). cloned_interfaces="" # List of cloned network interfaces to create. #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. #ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. #ifconfig_em0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry #ifconfig_em0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias #ifconfig_em0_name="net0" # Change interface name from em0 to net0. #vlans_em0="101 vlan0" # vlan(4) interfaces for em0 device #create_args_vlan0="vlan 102" # vlan tag for vlan0 device #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8) #ipv4_addrs_em0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry. # #autobridge_interfaces="bridge0" # List of bridges to check #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge # User ppp configuration. ppp_enable="NO" # Start user-ppp (or NO). ppp_program="/usr/sbin/ppp" # Path to user-ppp program. ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". # For details see man page for ppp(8). Default is auto. ppp_nat="YES" # Use PPP's internal network address translation or NO. ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. ppp_user="root" # Which user to run ppp as # Start multiple instances of ppp at boot time #ppp_profile="profile1 profile2 profile3" # Which profiles to use #ppp_profile1_mode="ddial" # Override ppp mode for profile1 #ppp_profile2_nat="NO" # Override nat mode for profile2 # profile3 uses default ppp_mode and ppp_nat ### Network daemon (miscellaneous) ### hostapd_program="/usr/sbin/hostapd" hostapd_enable="NO" # Run hostap daemon. syslogd_enable="YES" # Run syslog daemon (or NO). syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. syslogd_flags="-s" # Flags to syslogd (if enabled). syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted. altlog_proglist="" # List of chrooted applicatioins in /var inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. inetd_flags="-wW -C 60" # Optional flags to inetd iscsid_enable="NO" # iSCSI initiator daemon. iscsictl_enable="NO" # iSCSI initiator autostart. iscsictl_flags="-Aa" # Optional flags to iscsictl. hastd_enable="NO" # Run the HAST daemon (YES/NO). hastd_program="/sbin/hastd" # path to hastd, if you want a different one. hastd_flags="" # Optional flags to hastd. ggated_enable="NO" # Run the ggate daemon (YES/NO). ggated_config="/etc/gg.exports" # ggated(8) exports file. ggated_flags="" # Extra parameters like which port to bind to. ctld_enable="NO" # CAM Target Layer / iSCSI target daemon. local_unbound_enable="NO" # Local caching DNS resolver local_unbound_tls="NO" # Use DNS over TLS blacklistd_enable="NO" # Run blacklistd daemon (YES/NO). blacklistd_flags="" # Optional flags for blacklistd(8). resolv_enable="YES" # Enable resolv / resolvconf # # kerberos. Do not run the admin daemons on slave servers # kdc_enable="NO" # Run a kerberos 5 KDC (or NO). kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC kdc_flags="" # Additional flags to the kerberos 5 KDC kadmind_enable="NO" # Run kadmind (or NO) kadmind_program="/usr/libexec/kadmind" # path to kadmind kpasswdd_enable="NO" # Run kpasswdd (or NO) kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd kfd_enable="NO" # Run kfd (or NO) kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon kfd_flags="" ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon # (master daemon). ipropd_master_program="/usr/libexec/ipropd-master" ipropd_master_flags="" # Flags to ipropd-master. ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master. ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves. ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon # (slave daemon). ipropd_slave_program="/usr/libexec/ipropd-slave" ipropd_slave_flags="" # Flags to ipropd-slave. ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave. ipropd_slave_master="" # master node name. gssd_enable="NO" # Run the gssd daemon (or NO). gssd_program="/usr/sbin/gssd" # Path to gssd. gssd_flags="" # Flags for gssd. rwhod_enable="NO" # Run the rwho daemon (or NO). rwhod_flags="" # Flags for rwhod rarpd_enable="NO" # Run rarpd (or NO). rarpd_flags="-a" # Flags to rarpd. bootparamd_enable="NO" # Run bootparamd (or NO). bootparamd_flags="" # Flags to bootparamd pppoed_enable="NO" # Run the PPP over Ethernet daemon. pppoed_provider="*" # Provider and ppp(8) config file entry. pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). pppoed_interface="em0" # The interface that pppoed runs on. sshd_enable="NO" # Enable sshd sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. sshd_flags="" # Additional flags for sshd. ftpd_enable="NO" # Enable stand-alone ftpd. ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one. ftpd_flags="" # Additional flags to stand-alone ftpd. ### Network daemon (NFS): All need rpcbind_enable="YES" ### autofs_enable="NO" # Run autofs daemons. automount_flags="" # Flags to automount(8) (if autofs enabled). automountd_flags="" # Flags to automountd(8) (if autofs enabled). autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). nfs_client_enable="NO" # This host is an NFS client (or NO). nfs_access_cache="60" # Client cache timeout in seconds nfs_server_enable="NO" # This host is an NFS server (or NO). nfs_server_flags="-u -t" # Flags to nfsd (if enabled). nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO). nfs_server_maxio="131072" # Maximum I/O size for the nfsd. mountd_enable="NO" # Run mountd (or NO). mountd_flags="-r -S" # Flags to mountd (if NFS server enabled). weak_mountd_authentication="NO" # Allow non-root mount requests to be served. nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). nfs_bufpackets="" # bufspace (in packets) for client rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. rpc_statd_flags="" # Flags to rpc.statd (if enabled). rpcbind_enable="NO" # Run the portmapper service (YES/NO). rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. rpcbind_flags="" # Flags to rpcbind (if enabled). rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). keyserv_flags="" # Flags to keyserv (if enabled). nfsv4_server_enable="NO" # Enable support for NFSv4 nfsv4_server_only="NO" # Set NFS server to NFSv4 only nfscbd_enable="NO" # NFSv4 client side callback daemon nfscbd_flags="" # Flags for nfscbd nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon nfsuserd_flags="" # Flags for nfsuserd tlsclntd_enable="NO" # Run rpc.tlsclntd needed for NFS-over-TLS mount tlsclntd_flags="" # Flags for rpc.tlsclntd tlsservd_enable="NO" # Run rpc.tlsservd needed for NFS-over-TLS nfsd tlsservd_flags="" # Flags for rpc.tlsservd ### Network Time Services options: ### ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. ntpdate_flags="-b" # Flags to ntpdate (if enabled). ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers. ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high ntpd_flags="" # Additional flags to ntpd ntp_src_leapfile="/etc/ntp/leap-seconds" # Initial source for ntpd leapfile ntp_db_leapfile="/var/db/ntpd.leap-seconds.list" # Working copy (updated weekly) leapfile -ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list" +ntp_leapfile_sources="https://data.iana.org/time-zones/tzdb/leap-seconds.list" # Source from which to fetch leapfile ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch, # e.g. --no-verify-peer ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to # expiry. ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch # Network Information Services (NIS) options: All need rpcbind_enable="YES" ### nis_client_enable="NO" # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). nis_ypldap_enable="NO" # Run ypldap at boot time (or NO). nis_ypldap_flags="" # Flags to ypldap (if enabled). ### SNMP daemon ### # Be sure to understand the security implications of running SNMP v1/v2 # in your network. bsnmpd_enable="NO" # Run the SNMP daemon (or NO). bsnmpd_flags="" # Flags for bsnmpd. ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). #defaultrouter_fibN="192.0.2.1" # Use this form to set a gateway for FIB N static_arp_pairs="" # Set to static ARP list (or leave empty). static_ndp_pairs="" # Set to static NDP list (or leave empty). static_routes="" # Set to static route list (or leave empty). gateway_enable="NO" # Set to YES if this host will be a gateway. routed_enable="NO" # Set to YES to enable a routing daemon. routed_program="/sbin/routed" # Name of routing daemon to use if enabled. routed_flags="-q" # Flags for routing daemon. arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us ### Bluetooth ### hcsecd_enable="NO" # Enable hcsecd(8) (or NO) hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file sdpd_enable="NO" # Enable sdpd(8) (or NO) sdpd_control="/var/run/sdp" # sdpd(8) control socket sdpd_groupname="nobody" # set spdp(8) user/group to run as after sdpd_username="nobody" # it initializes bthidd_enable="NO" # Enable bthidd(8) (or NO) bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file bthidd_evdev_support="AUTO" # AUTO depends on EVDEV_SUPPORT kernel option rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO) rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf # #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one' rfcomm_pppd_server_one_channel="1" # Override local channel for 'one' #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register #rfcomm_pppd_server_one_register_dun="NO" # for 'one' # #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two' rfcomm_pppd_server_two_channel="3" # Override local channel for 'two' #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register #rfcomm_pppd_server_two_register_dun="NO" # for 'two' ubthidhci_enable="NO" # Switch an USB BT controller present on #ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode. #ubthidhci_addr="2" # Check usbconfig list to find the correct # numbers for your system. ### Network link/usability verification options netwait_enable="NO" # Enable rc.d/netwait (or NO) #netwait_ip="" # Wait for ping response from any IP in this list. netwait_timeout="60" # Total number of seconds to perform pings. #netwait_if="" # Wait for active link on each intf in this list. netwait_if_timeout="30" # Total number of seconds to monitor link state. ### Miscellaneous network options: ### icmp_bmcastecho="NO" # respond to broadcast ping packets ### IPv6 options: ### ipv6_network_interfaces="auto" # List of IPv6 network interfaces # (or "auto" or "none"). ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no # corresponding $ifconfig_IF_ipv6 is # marked as IFDISABLED for security # reason. ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) #ipv6_defaultrouter_fibN="2001:db8::" # Use this form to set a gateway for FIB N ipv6_static_routes="" # Set to static route list (or leave empty). #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 # route toward loopback interface. #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. ipv6_cpe_wanif="NO" # Set to the upstream interface name if this # node will work as a router to forward IPv6 # packets not explicitly addressed to itself. ipv6_privacy="NO" # Use privacy address on RA-receiving IFs # (RFC 4941) route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon. route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. route6d_flags="" # Flags to IPv6 routing daemon. #route6d_flags="-l" # Example for route6d with only IPv6 site local # addrs. #route6d_flags="-q" # If you want to run a routing daemon on an end # node, you should stop advertisement. #ipv6_network_interfaces="em0 em1" # Examples for router # or static configuration for end node. # Choose correct prefix value. #ipv6_prefix_em0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. #ipv6_prefix_em1="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. ipv6_default_interface="NO" # Default output interface for scoped addrs. # This works only with # ipv6_gateway_enable="NO". rtsol_flags="-i" # Flags to IPv6 router solicitation. rtsold_enable="NO" # Set to YES to enable an IPv6 router # solicitation daemon. rtsold_flags="-a -i" # Flags to an IPv6 router solicitation # daemon. rtadvd_enable="NO" # Set to YES to enable an IPv6 router # advertisement daemon. If set to YES, # this router becomes a possible candidate # IPv6 default router for local subnets. rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 # tunneling interface. Specify this entry # to enable 6to4 interface. stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, # to limit peer addr range. Effective value # is 0-31. stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. # If you like, you can set "AUTO" for this. stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr # communication. (like ::ffff:a.b.c.d) ip6addrctl_enable="YES" # Set to YES to enable default address selection ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages ip6addrctl_policy="AUTO" # A pre-defined address selection policy # (ipv4_prefer, ipv6_prefer, or AUTO) ############################################################## ### System console options ################################# ############################################################## keyboard="" # keyboard device to use (default /dev/kbd0). keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. keychange="NO" # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off. saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko moused_nondefault_enable="YES" # Treat non-default mice as enabled unless # specifically overridden in rc.conf(5). moused_enable="NO" # Run the mouse daemon. moused_type="auto" # See man page for rc.conf(5) for available settings. moused_port="/dev/psm0" # Set to your mouse port. moused_flags="" # Any additional flags to moused. mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your # language code table, specify alternative range # start like mousechar_start=3, see vidcontrol(1) allscreens_flags="" # Set this vidcontrol mode for all virtual screens allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens ############################################################## ### Mail Transfer Agent (MTA) options ###################### ############################################################## # Settings for /etc/rc.d/sendmail: sendmail_enable="NONE" # Run the sendmail inbound daemon (YES/NO/NONE). # If NONE, don't start any sendmail processes. sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file sendmail_procname="/usr/sbin/sendmail" # sendmail process name sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) sendmail_cert_create="YES" # Create a server certificate if none (YES/NO) #sendmail_cert_cn="CN" # CN of the generate certificate sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" # Flags for localhost-only MTA sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" # Flags for sendmail_msp_queue daemon. sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO). ############################################################## ### Miscellaneous administrative options ################### ############################################################## auditd_enable="NO" # Run the audit daemon. auditd_program="/usr/sbin/auditd" # Path to the audit daemon. auditd_flags="" # Which options to pass to the audit daemon. auditdistd_enable="NO" # Run the audit daemon. auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon. auditdistd_flags="" # Which options to pass to the auditdistd daemon. cron_enable="YES" # Run the periodic job daemon. cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). cron_dst="YES" # Handle DST transitions intelligently (YES/NO) cron_flags="" # Which options to pass to the cron daemon. cfumass_enable="NO" # Create default LUN for cfumass(4). cfumass_dir="/var/cfumass" # File to LUN's contents. cfumass_image="/var/tmp/cfumass.img" # LUN's backing file path. lpd_enable="NO" # Run the line printer daemon. lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. lpd_flags="" # Flags to lpd (if enabled). nscd_enable="NO" # Run the nsswitch caching daemon. chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd. chkprintcap_flags="-d" # Create missing directories by default. dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO); # this should be commented out here # for stable branches to respect kenv. dumpon_flags="" # Options to pass to dumpon(8), followed by dumpdev. dumpdir="/var/crash" # Directory where crash dumps are to be stored savecore_enable="YES" # Extract core from dump devices if any savecore_flags="-m 10" # Used if dumpdev is enabled above, and present. # By default, only the 10 most recent kernel dumps # are saved. service_delete_empty="NO" # Have 'service delete' remove empty rc.conf.d files. crashinfo_enable="YES" # Automatically generate crash dump summary. crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. quota_enable="NO" # turn on quotas on startup (or NO). check_quotas="YES" # Check quotas on startup (or NO). quotaon_flags="-a" # Turn quotas on for all file systems (if enabled) quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown quotacheck_flags="-a" # Check all file system quotas (if enabled) accounting_enable="NO" # Turn on process accounting (or NO). firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if # this file exists. Should be on a R/W filesystem so # the file can be deleted after the boot completes. sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). linux_mounts_enable="YES" # If linux_enable is set to YES, mount Linux-specific # filesystems at startup. clear_tmp_enable="NO" # Clear /tmp at startup. clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks ldconfig_paths="/usr/lib/compat ${_localbase}/lib ${_localbase}/lib/compat/pkg" # shared library search paths ldconfig32_paths="/usr/lib32 /usr/lib32/compat" # 32-bit compatibility shared library search paths ldconfig_local_dirs="${_localbase}/libdata/ldconfig" # Local directories with ldconfig configuration files. ldconfig_local32_dirs="${_localbase}/libdata/ldconfig32" # Local directories with 32-bit compatibility ldconfig # configuration files. kern_securelevel_enable="NO" # kernel security level (see security(7)) kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure # Note that setting securelevel to 0 will result # in the system booting with securelevel set to 1, as # init(8) will raise the level when rc(8) completes. update_motd="YES" # update version info in /var/run/motd (or NO) entropy_boot_file="/boot/entropy" # Set to NO to disable very early # (used at early boot time) entropy caching through reboots. entropy_file="/entropy" # Set to NO to disable late (used when going multi-user) # entropy through reboots. # /var/db/entropy-file is preferred if / is not avail. entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron. entropy_save_sz="4096" # Size of the entropy cache files. entropy_save_num="8" # Number of entropy cache files to save. harvest_mask="511" # Entropy device harvests all but the very invasive sources. # (See 'sysctl kern.random.harvest' and random(4)) osrelease_enable="YES" # Update /var/run/os-release on boot (or NO). osrelease_file="/var/run/os-release" # File to update for os-release. osrelease_perms="444" # Default permission for os-release file. dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot watchdogd_enable="NO" # Start the software watchdog daemon watchdogd_flags="" # Flags to watchdogd (if enabled) watchdogd_timeout="" # watchdogd timeout, overrides -t in watchdogd_flags watchdogd_shutdown_timeout="" # Timeout to use after watchdogd is stopped. # Has effect only for system shutdown. # Overrides -x in watchdogd_flags. devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing # devfs(8) rules. devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to # apply (must be mounted already, i.e. fstab(5)) devfs_load_rulesets="YES" # Enable to always load the default rulesets performance_cx_lowest="NONE" # Online CPU idle state performance_cpu_freq="NONE" # Online CPU frequency economy_cx_lowest="Cmax" # Offline CPU idle state economy_cpu_freq="NONE" # Offline CPU frequency virecover_enable="YES" # Perform housekeeping for the vi(1) editor ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4) # ruleset file. newsyslog_enable="YES" # Run newsyslog at startup. newsyslog_flags="-CN" # Newsyslog flags to create marked files mixer_enable="YES" # Run the sound mixer. opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off # rctl(8) requires kernel options RACCT and RCTL rctl_enable="YES" # Load rctl(8) rules on boot rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5). iovctl_files="" # Config files for iovctl(8) ############################################################## ### Jail Configuration (see rc.conf(5) manual page) ########## ############################################################## jail_enable="NO" # Set to NO to disable starting of any jails jail_conf="/etc/jail.conf" # Configuration file for jail(8) jail_confwarn="YES" # Prevent warning about obsolete per-jail configuration jail_parallel_start="NO" # Start jails in the background jail_list="" # Space separated list of names of jails jail_reverse_stop="NO" # Stop jails in reverse order ############################################################## ### Define source_rc_confs, the mechanism used by /etc/rc.* ## ### scripts to source rc_conf_files overrides safely. ## ############################################################## if [ -z "${source_rc_confs_defined}" ]; then source_rc_confs_defined=yes source_rc_confs() { local i sourced_files for i in ${rc_conf_files}; do case ${sourced_files} in *:$i:*) ;; *) sourced_files="${sourced_files}:$i:" if [ -r $i ]; then . $i fi ;; esac done # Re-do process to pick up [possibly] redefined $rc_conf_files for i in ${rc_conf_files}; do case ${sourced_files} in *:$i:*) ;; *) sourced_files="${sourced_files}:$i:" if [ -r $i ]; then . $i fi ;; esac done } fi # Allow vendors to override FreeBSD defaults in /etc/default/rc.conf # without the need to carefully manage /etc/rc.conf. if [ -r /etc/defaults/vendor.conf ]; then . /etc/defaults/vendor.conf fi