diff --git a/sys/sys/buf_ring.h b/sys/sys/buf_ring.h index ad463fba27cb..66e1e55bc5e9 100644 --- a/sys/sys/buf_ring.h +++ b/sys/sys/buf_ring.h @@ -1,382 +1,369 @@ /*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2007-2009 Kip Macy * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #ifndef _SYS_BUF_RING_H_ #define _SYS_BUF_RING_H_ #include #include #include #include #if defined(DEBUG_BUFRING) && defined(_KERNEL) #include #include #endif /* * We only apply the mask to the head and tail values when calculating the * index into br_ring to access. This means the upper bits can be used as * epoch to reduce the chance the atomic_cmpset succeedes when it should * fail, e.g. when the head wraps while the CPU is in an interrupt. This * is a probablistic fix as there is still a very unlikely chance the * value wraps back to the expected value. * */ struct buf_ring { volatile uint32_t br_prod_head; volatile uint32_t br_prod_tail; int br_prod_size; int br_prod_mask; uint64_t br_drops; volatile uint32_t br_cons_head __aligned(CACHE_LINE_SIZE); volatile uint32_t br_cons_tail; int br_cons_size; int br_cons_mask; #if defined(DEBUG_BUFRING) && defined(_KERNEL) struct mtx *br_lock; #endif void *br_ring[0] __aligned(CACHE_LINE_SIZE); }; /* * multi-producer safe lock-free ring buffer enqueue * */ static __inline int buf_ring_enqueue(struct buf_ring *br, void *buf) { uint32_t prod_head, prod_next, prod_idx; uint32_t cons_tail, mask; mask = br->br_prod_mask; #ifdef DEBUG_BUFRING /* * Note: It is possible to encounter an mbuf that was removed * via drbr_peek(), and then re-added via drbr_putback() and * trigger a spurious panic. */ for (uint32_t i = br->br_cons_head; i != br->br_prod_head; i++) if (br->br_ring[i & mask] == buf) panic("buf=%p already enqueue at %d prod=%d cons=%d", buf, i, br->br_prod_tail, br->br_cons_tail); #endif critical_enter(); do { prod_head = br->br_prod_head; prod_next = prod_head + 1; cons_tail = atomic_load_acq_32(&br->br_cons_tail); if ((int32_t)(cons_tail + br->br_prod_size - prod_next) < 1) { rmb(); if (prod_head == br->br_prod_head && cons_tail == br->br_cons_tail) { br->br_drops++; critical_exit(); return (ENOBUFS); } continue; } } while (!atomic_cmpset_acq_32(&br->br_prod_head, prod_head, prod_next)); prod_idx = prod_head & mask; #ifdef DEBUG_BUFRING if (br->br_ring[prod_idx] != NULL) panic("dangling value in enqueue"); #endif br->br_ring[prod_idx] = buf; /* * If there are other enqueues in progress * that preceded us, we need to wait for them * to complete */ while (br->br_prod_tail != prod_head) cpu_spinwait(); atomic_store_rel_32(&br->br_prod_tail, prod_next); critical_exit(); return (0); } /* * multi-consumer safe dequeue * */ static __inline void * buf_ring_dequeue_mc(struct buf_ring *br) { uint32_t cons_head, cons_next, cons_idx; - uint32_t mask; + uint32_t prod_tail, mask; void *buf; critical_enter(); mask = br->br_cons_mask; do { cons_head = br->br_cons_head; cons_next = cons_head + 1; + prod_tail = atomic_load_acq_32(&br->br_prod_tail); - if (cons_head == br->br_prod_tail) { + if (cons_head == prod_tail) { critical_exit(); return (NULL); } } while (!atomic_cmpset_acq_32(&br->br_cons_head, cons_head, cons_next)); cons_idx = cons_head & mask; buf = br->br_ring[cons_idx]; #ifdef DEBUG_BUFRING br->br_ring[cons_idx] = NULL; #endif /* * If there are other dequeues in progress * that preceded us, we need to wait for them * to complete */ while (br->br_cons_tail != cons_head) cpu_spinwait(); atomic_store_rel_32(&br->br_cons_tail, cons_next); critical_exit(); return (buf); } /* * single-consumer dequeue * use where dequeue is protected by a lock * e.g. a network driver's tx queue lock */ static __inline void * buf_ring_dequeue_sc(struct buf_ring *br) { uint32_t cons_head, cons_next, cons_idx; uint32_t prod_tail, mask; void *buf; mask = br->br_cons_mask; cons_head = br->br_cons_head; prod_tail = atomic_load_acq_32(&br->br_prod_tail); cons_next = cons_head + 1; if (cons_head == prod_tail) return (NULL); cons_idx = cons_head & mask; br->br_cons_head = cons_next; buf = br->br_ring[cons_idx]; #ifdef DEBUG_BUFRING br->br_ring[cons_idx] = NULL; #ifdef _KERNEL if (!mtx_owned(br->br_lock)) panic("lock not held on single consumer dequeue"); #endif if (br->br_cons_tail != cons_head) panic("inconsistent list cons_tail=%d cons_head=%d", br->br_cons_tail, cons_head); #endif atomic_store_rel_32(&br->br_cons_tail, cons_next); return (buf); } /* * single-consumer advance after a peek * use where it is protected by a lock * e.g. a network driver's tx queue lock */ static __inline void buf_ring_advance_sc(struct buf_ring *br) { uint32_t cons_head, cons_next, prod_tail; #ifdef DEBUG_BUFRING uint32_t mask; mask = br->br_cons_mask; #endif cons_head = br->br_cons_head; prod_tail = br->br_prod_tail; cons_next = cons_head + 1; if (cons_head == prod_tail) return; br->br_cons_head = cons_next; #ifdef DEBUG_BUFRING br->br_ring[cons_head & mask] = NULL; #endif atomic_store_rel_32(&br->br_cons_tail, cons_next); } /* * Used to return a buffer (most likely already there) * to the top of the ring. The caller should *not* * have used any dequeue to pull it out of the ring * but instead should have used the peek() function. * This is normally used where the transmit queue * of a driver is full, and an mbuf must be returned. * Most likely whats in the ring-buffer is what * is being put back (since it was not removed), but * sometimes the lower transmit function may have * done a pullup or other function that will have * changed it. As an optimization we always put it * back (since jhb says the store is probably cheaper), * if we have to do a multi-queue version we will need * the compare and an atomic. */ static __inline void buf_ring_putback_sc(struct buf_ring *br, void *new) { uint32_t mask; mask = br->br_cons_mask; KASSERT((br->br_cons_head & mask) != (br->br_prod_tail & mask), ("Buf-Ring has none in putback")) ; br->br_ring[br->br_cons_head & mask] = new; } /* * return a pointer to the first entry in the ring * without modifying it, or NULL if the ring is empty * race-prone if not protected by a lock */ static __inline void * buf_ring_peek(struct buf_ring *br) { - uint32_t mask; + uint32_t cons_head, prod_tail, mask; #if defined(DEBUG_BUFRING) && defined(_KERNEL) if ((br->br_lock != NULL) && !mtx_owned(br->br_lock)) panic("lock not held on single consumer dequeue"); #endif mask = br->br_cons_mask; - /* - * I believe it is safe to not have a memory barrier - * here because we control cons and tail is worst case - * a lagging indicator so we worst case we might - * return NULL immediately after a buffer has been enqueued - */ - if (br->br_cons_head == br->br_prod_tail) + prod_tail = atomic_load_acq_32(&br->br_prod_tail); + cons_head = br->br_cons_head; + + if (cons_head == prod_tail) return (NULL); - return (br->br_ring[br->br_cons_head & mask]); + return (br->br_ring[cons_head & mask]); } static __inline void * buf_ring_peek_clear_sc(struct buf_ring *br) { - uint32_t mask; + uint32_t cons_head, prod_tail, mask; void *ret; #if defined(DEBUG_BUFRING) && defined(_KERNEL) if (!mtx_owned(br->br_lock)) panic("lock not held on single consumer dequeue"); #endif mask = br->br_cons_mask; - if (br->br_cons_head == br->br_prod_tail) - return (NULL); + prod_tail = atomic_load_acq_32(&br->br_prod_tail); + cons_head = br->br_cons_head; -#if defined(__arm__) || defined(__aarch64__) - /* - * The barrier is required there on ARM and ARM64 to ensure, that - * br->br_ring[br->br_cons_head] will not be fetched before the above - * condition is checked. - * Without the barrier, it is possible, that buffer will be fetched - * before the enqueue will put mbuf into br, then, in the meantime, the - * enqueue will update the array and the br_prod_tail, and the - * conditional check will be true, so we will return previously fetched - * (and invalid) buffer. - */ - atomic_thread_fence_acq(); -#endif + if (cons_head == prod_tail) + return (NULL); - ret = br->br_ring[br->br_cons_head & mask]; + ret = br->br_ring[cons_head & mask]; #ifdef DEBUG_BUFRING /* * Single consumer, i.e. cons_head will not move while we are * running, so atomic_swap_ptr() is not necessary here. */ - br->br_ring[br->br_cons_head & mask] = NULL; + br->br_ring[cons_head & mask] = NULL; #endif return (ret); } static __inline int buf_ring_full(struct buf_ring *br) { return (br->br_prod_head == br->br_cons_tail + br->br_cons_size - 1); } static __inline int buf_ring_empty(struct buf_ring *br) { return (br->br_cons_head == br->br_prod_tail); } static __inline int buf_ring_count(struct buf_ring *br) { return ((br->br_prod_size + br->br_prod_tail - br->br_cons_tail) & br->br_prod_mask); } #ifdef _KERNEL struct buf_ring *buf_ring_alloc(int count, struct malloc_type *type, int flags, struct mtx *); void buf_ring_free(struct buf_ring *br, struct malloc_type *type); #else #include static inline struct buf_ring * buf_ring_alloc(int count) { struct buf_ring *br; KASSERT(powerof2(count), ("buf ring must be size power of 2")); br = calloc(1, sizeof(struct buf_ring) + count * sizeof(void *)); if (br == NULL) return (NULL); br->br_prod_size = br->br_cons_size = count; br->br_prod_mask = br->br_cons_mask = count - 1; br->br_prod_head = br->br_cons_head = 0; br->br_prod_tail = br->br_cons_tail = 0; return (br); } static inline void buf_ring_free(struct buf_ring *br) { free(br); } #endif /* !_KERNEL */ #endif /* _SYS_BUF_RING_H_ */