root@test-epyc:~ # kldload if_axp && sleep 1 && kldunload if_axp ax0: mem 0xef7e0000-0xef7fffff,0xef7c0000-0xef7dffff,0xef80e000-0xef80ffff irq 40 at device 0.4 on pci6 ax0: Using 512 TX descriptors and 512 RX descriptors ax0: Using 4 RX queues 4 TX queues ax0: Using MSI-X interrupts with 8 vectors ax0: xgbe_phy_reset: no phydev ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax1: mem 0xef7a0000-0xef7bffff,0xef780000-0xef79ffff,0xef80c000-0xef80dfff irq 41 at device 0.5 on pci6 ax1: axgbe_if_attach_pre: Device ID: 0x1458 ax1: xpcs window def : 0x00009060 ax1: xpcs window sel : 0x00009064 ax1: xpcs window : 0x0000b000 ax1: xpcs window size : 0x00001000 ax1: xpcs window mask : 0x00000fff ax1: port property 0 = 0x15800801 ax1: port property 1 = 0x10100c10 ax1: port property 2 = 0x000e000e ax1: port property 3 = 0x2980a100 ax1: port property 4 = 0x00801c13 ax1: max tx/rx channel count = 16/16 ax1: max tx/rx hw queue count = 16/12 ax1: xgbe_get_all_hw_features: Tx fifo 0x40000 Rx fifo 0x40000 ax1: ncpu 4 intrcpu 4 ax1: TX/RX max channel count = 16/16 ax1: TX/RX max queue count = 16/12 ax1: TX/RX DMA ring count = 4/4 ax1: TX/RX hardware queue count = 4/12 ax1: max tx/rx max fifo size = 229376/229376 ax1: axgbe_alloc_channels: txqs 4/4 rxqs 12/4 ax1: Channel count set to: 4 ax1: Using 512 TX descriptors and 512 RX descriptors ax1: Using 4 RX queues 4 TX queues ax0: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: Using MSI-X interrupts with 8 vectors ax0: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: axgbe_if_tx_queues_alloc: txqsets 4/4 txqs 1 ax0: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: allocated for 4 tx queues ax1: axgbe_if_rx_queues_alloc: rxqsets 4/4 rxqs 2 ax1: allocated for 4 rx queues ax1: axgbe_if_msix_intr_assign: msix 8 txqsets 4 rxqsets 4 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_if_msix_intr_assign: channel count 4 idx 0 irq 5 [323/2765] ax1: axgbe_if_msix_intr_assign: channel count 4 idx 1 irq 6 ax1: axgbe_if_msix_intr_assign: channel count 4 idx 2 irq 7 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_if_msix_intr_assign: channel count 4 idx 3 irq 8 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_if_attach_post: tx fifo 0x38000 rx fifo 0x38000 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: adjusted TX 4/4 RX 4/12 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: Channel count set to: 4 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: xgbe_i2c_disable: final i2c_disable 0 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: xgbe_i2c_get_features: I2C features: MAX_SPEED_MODE=2, RX_BUFFER_DEPTH=15, TX_BUFFER_DEPTH=15 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: *************** I2C Registers ************** ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: IC_CON : 0000000263 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: IC_TAR : 0000000021 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: IC_HS_MADDR : 0000000000 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: IC_INTR_STAT : 0000000000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: IC_INTR_MASK : 0000000000 ax1: IC_RAW_INTR_STAT : 0000000000 ax1: IC_RX_TL : 000000000f ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: IC_TX_TL : 0000000000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: IC_ENABLE : 0000000000 ax1: IC_STATUS : 0000000006 ax1: IC_TXFLR : 0000000000 ax1: IC_RXFLR : 0000000000 ax1: IC_ENABLE_STATUS : 0000000000 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: IC_COMP_PARAM1 : 00000f0faa ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: port mode=8 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: port id=1 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: port speeds=0xb ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: conn type=1 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: mdio addr=0 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: xgbe_phy_init: redrv addr=0 redrv i/f=1 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: xgbe_phy_init: port mode 8 [268/2765] ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: SFP: mux_address=0x73 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: SFP: mux_channel=1 ax1: SFP: gpio_address=0x21 ax1: SFP: gpio_mask=0x2 ax1: SFP: gpio_rx_los=9 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: SFP: gpio_tx_fault=10 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: SFP: gpio_mod_absent=8 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: SFP: gpio_rate_select=0 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: xgbe_phy_init: start 7 mode 1 adv 0x0 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: xgbe_phy_init: start 7 mode 1 adv 0x0 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: xgbe_phy_init: conn type 1 mode 1 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: xgbe_phy_init: return success ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: xgbe_phy_perform_ratechange: Rate change done ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: phy powered off ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: xgbe_phy_reset: mode 8 ax1: xgbe_phy_reset: no phydev ax1: axgbe_if_attach_post: rx_buf_size 1536 ax1: mtu 1500 ax1: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: axgbe_if_update_admin_status: phy_link -1 speed 1 ax2: mem 0xef760000-0xef77ffff,0xef740000-0xef75ffff,0xef80a000-0xef80bfff irq 42 at device 0.6 on pci6 ax2: axgbe_if_attach_pre: Device ID: 0x1459 ax2: xpcs window def : 0x00009060 ax2: xpcs window sel : 0x00009064 ax2: xpcs window : 0x0000b000 ax2: xpcs window size : 0x00001000 ax2: xpcs window mask : 0x00000fff ax2: port property 0 = 0x15800802 ax2: port property 1 = 0x02020202 ax2: port property 2 = 0x00040004 ax2: port property 3 = 0x25406100 ax2: port property 4 = 0x00801c23 ax2: max tx/rx channel count = 2/2 ax2: max tx/rx hw queue count = 2/2 ax2: xgbe_get_all_hw_features: Tx fifo 0x10000 Rx fifo 0x10000 ax2: ncpu 4 intrcpu 4 ax2: TX/RX max channel count = 2/2 ax2: TX/RX max queue count = 2/2 ax2: TX/RX DMA ring count = 2/2 ax2: TX/RX hardware queue count = 2/2 ax2: max tx/rx max fifo size = 65536/65536 [213/2765] ax2: axgbe_alloc_channels: txqs 2/2 rxqs 2/2 ax2: Channel count set to: 2 ax2: Using 512 TX descriptors and 512 RX descriptors ax2: Using 2 RX queues 2 TX queues ax1: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_if_update_admin_status: phy_link -1 speed 1 ax2: Using MSI-X interrupts with 6 vectors ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax2: axgbe_if_tx_queues_alloc: txqsets 2/2 txqs 1 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: allocated for 2 tx queues ax2: axgbe_if_rx_queues_alloc: rxqsets 2/2 rxqs 2 ax2: allocated for 2 rx queues ax2: axgbe_if_msix_intr_assign: msix 6 txqsets 2 rxqsets 2 ax2: axgbe_dev_isr DMA ISR: 0x20000 ax2: axgbe_dev_isr MAC ISR: 0x2000001 ax2: axgbe_if_msix_intr_assign: channel count 2 idx 0 irq 5 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: axgbe_if_msix_intr_assign: channel count 2 idx 1 irq 6 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax2: axgbe_if_attach_post: tx fifo 0x10000 rx fifo 0x10000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: adjusted TX 2/2 RX 2/2 ax2: axgbe_dev_isr DMA ISR: 0x20000 ax2: Channel count set to: 2 ax2: axgbe_dev_isr MAC ISR: 0x2000001 ax2: xgbe_i2c_disable: final i2c_disable 0 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax2: xgbe_i2c_get_features: I2C features: MAX_SPEED_MODE=2, RX_BUFFER_DEPTH=15, TX_BUFFER_DEPTH=15 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: *************** I2C Registers ************** ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: IC_CON : 0000000263 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax2: IC_TAR : 0000000021 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: IC_HS_MADDR : 0000000000 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax2: IC_INTR_STAT : 0000000000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax2: IC_INTR_MASK : 0000000000 ax2: IC_RAW_INTR_STAT : 0000000000 ax2: IC_RX_TL : 000000000f ax2: IC_TX_TL : 0000000000 ax2: IC_ENABLE : 0000000000 ax2: IC_STATUS : 0000000006 ax2: IC_TXFLR : 0000000000 ax2: IC_RXFLR : 0000000000 ax2: IC_ENABLE_STATUS : 0000000000 ax2: IC_COMP_PARAM1 : 00000f0faa [158/2765] ax2: port mode=8 ax2: port id=2 ax2: port speeds=0xb ax2: conn type=1 ax2: mdio addr=0 ax2: xgbe_phy_init: redrv addr=0 redrv i/f=1 ax2: xgbe_phy_init: port mode 8 ax2: SFP: mux_address=0x73 ax2: SFP: mux_channel=2 ax2: SFP: gpio_address=0x21 ax2: SFP: gpio_mask=0x2 ax2: SFP: gpio_rx_los=5 ax2: SFP: gpio_tx_fault=6 ax2: SFP: gpio_mod_absent=4 ax2: SFP: gpio_rate_select=0 ax2: xgbe_phy_init: start 7 mode 1 adv 0x0 ax2: xgbe_phy_init: start 7 mode 1 adv 0x0 ax2: xgbe_phy_init: conn type 1 mode 1 ax2: xgbe_phy_init: return success ax2: xgbe_phy_perform_ratechange: Rate change done ax2: phy powered off ax2: xgbe_phy_reset: mode 8 ax2: xgbe_phy_reset: no phydev ax2: axgbe_if_attach_post: rx_buf_size 1536 ax2: mtu 1500 ax2: axgbe_if_update_admin_status: phy_link -1 speed 1 ax2: axgbe_if_update_admin_status: phy_link -1 speed 1 ax2: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax3: ax0: axgbe_dev_isr MAC ISR: 0x2000001 mem 0xef720000-ax0: axgbe_dev_isr DMA ISR: 0x20000 0xef73ffffax0: axgbe_dev_isr MAC ISR: 0x2000001 ,0xef700000-0xef71ffff,0xef808000-0xef809fff irq 43 at device 0.7 on pci6 ax3: axgbe_if_attach_pre: Device ID: 0x1459 ax3: xpcs window def : 0x00009060 ax3: xpcs window sel : 0x00009064 ax3: xpcs window : 0x0000b000 ax3: xpcs window size : 0x00001000 ax3: xpcs window mask : 0x00000fff ax3: port property 0 = 0x15800803 ax3: port property 1 = 0x02020202 ax3: port property 2 = 0x00040004 ax3: port property 3 = 0x21002100 [103/2765] ax3: port property 4 = 0x00801c33 ax3: max tx/rx channel count = 2/2 ax3: max tx/rx hw queue count = 2/2 ax3: xgbe_get_all_hw_features: Tx fifo 0x10000 Rx fifo 0x10000 ax3: ncpu 4 intrcpu 4 ax3: TX/RX max channel count = 2/2 ax3: TX/RX max queue count = 2/2 ax3: TX/RX DMA ring count = 2/2 ax3: TX/RX hardware queue count = 2/2 ax3: max tx/rx max fifo size = 65536/65536 ax3: axgbe_alloc_channels: txqs 2/2 rxqs 2/2 ax3: Channel count set to: 2 ax3: Using 512 TX descriptors and 512 RX descriptors ax3: Using 2 RX queues 2 TX queues ax3: Using MSI-X interrupts with 6 vectors ax3: axgbe_if_tx_queues_alloc: txqsets 2/2 txqs 1 ax3: allocated for 2 tx queues ax3: axgbe_if_rx_queues_alloc: rxqsets 2/2 rxqs 2 ax3: allocated for 2 rx queues ax3: axgbe_if_msix_intr_assign: msix 6 txqsets 2 rxqsets 2 ax3: axgbe_if_msix_intr_assign: channel count 2 idx 0 irq 5 ax3: axgbe_if_msix_intr_assign: channel count 2 idx 1 irq 6 ax3: axgbe_dev_isr DMA ISR: 0x20000 ax3: axgbe_if_attach_post: tx fifo 0x10000 rx fifo 0x10000 ax3: axgbe_dev_isr MAC ISR: 0x2000001 ax3: adjusted TX 2/2 RX 2/2 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax3: Channel count set to: 2 ax3: axgbe_dev_isr DMA ISR: 0x0 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax3: xgbe_i2c_disable: final i2c_disable 0 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax3: xgbe_i2c_get_features: I2C features: MAX_SPEED_MODE=2, RX_BUFFER_DEPTH=15, TX_BUFFER_DEPTH=15 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax3: *************** I2C Registers ************** ax0: axgbe_dev_isr DMA ISR: 0x20000 ax3: IC_CON : 0000000263 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax3: IC_TAR : 0000000073 ax3: IC_HS_MADDR : 0000000000 ax3: IC_INTR_STAT : 0000000000 ax3: IC_INTR_MASK : 0000000000 ax3: IC_RAW_INTR_STAT : 0000000000 ax3: IC_RX_TL : 000000000f ax3: IC_TX_TL : 0000000000 ax3: IC_ENABLE : 0000000000 ax3: IC_STATUS : 0000000006 ax3: IC_TXFLR : 0000000000 ax3: IC_RXFLR : 0000000000 ax3: IC_ENABLE_STATUS : 0000000000 ax3: IC_COMP_PARAM1 : 00000f0faa ax3: port mode=8 ax3: port id=3 ax3: port speeds=0xb ax3: conn type=1 [48/2765] ax3: mdio addr=0 ax3: xgbe_phy_init: redrv addr=0 redrv i/f=1 ax3: xgbe_phy_init: port mode 8 ax3: SFP: mux_address=0x73 ax3: SFP: mux_channel=3 ax3: SFP: gpio_address=0x21 ax3: SFP: gpio_mask=0x2 ax3: SFP: gpio_rx_los=1 ax3: SFP: gpio_tx_fault=2 ax3: SFP: gpio_mod_absent=0 ax3: SFP: gpio_rate_select=0 ax3: xgbe_phy_init: start 7 mode 1 adv 0x0 ax3: xgbe_phy_init: start 7 mode 1 adv 0x0 ax3: xgbe_phy_init: conn type 1 mode 1 ax3: xgbe_phy_init: return success ax2: axgbe_if_update_admin_status: phy_link -1 speed 1 ax3: xgbe_phy_perform_ratechange: Rate change done ax2: axgbe_if_update_admin_status: phy_link -1 speed 1 ax3: phy powered off ax2: axgbe_if_update_admin_status: phy_link -1 speed 1 ax3: xgbe_phy_reset: mode 8 ax3: xgbe_phy_reset: no phydev ax3: axgbe_if_attach_post: rx_buf_size 1536 ax3: mtu 1500 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax3: axgbe_if_update_admin_status: phy_link -1 speed 1 ax3: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax3: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax3: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax3: axgbe_if_update_admin_status: phy_link -1 speed 1 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax3: axgbe_if_update_admin_status: phy_link -1 speed 1 ax0: axgbe_dev_isr DMA ISR: 0x20000 [3/2765] ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_dev_isr DMA ISR: 0x20000 ax0: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax1: axgbe_dev_isr DMA ISR: 0x20000 ax1: axgbe_dev_isr MAC ISR: 0x2000001 ax0: axgbe_pci_stop: Stopping when XGBE_DOWN ax0: axgbe_interrupts_free: mode 2 ax0: axgbe_interrupts_free: rid 5 ax0: axgbe_interrupts_free: rid 6 ax0: axgbe_interrupts_free: rid 7 ax0: axgbe_interrupts_free: rid 8 ax0: detached pci6: at device 0.4 (no driver attached) ax1: axgbe_pci_stop: Stopping when XGBE_DOWN ax1: axgbe_interrupts_free: mode 2 ax1: axgbe_interrupts_free: rid 5 ax1: axgbe_interrupts_free: rid 6 ax1: axgbe_interrupts_free: rid 7 ax1: axgbe_interrupts_free: rid 8 ax1: detached pci6: at device 0.5 (no driver attached) ax2: axgbe_pci_stop: Stopping when XGBE_DOWN ax2: axgbe_interrupts_free: mode 2 ax2: axgbe_interrupts_free: rid 5 ax2: axgbe_interrupts_free: rid 6 ax2: detached pci6: at device 0.6 (no driver attached) ax3: axgbe_pci_stop: Stopping when XGBE_DOWN ax3: axgbe_interrupts_free: mode 2 ax3: axgbe_interrupts_free: rid 5 ax3: axgbe_interrupts_free: rid 6 ax3: detached pci6: at device 0.7 (no driver attached)