diff --git a/Mk/Uses/python.mk b/Mk/Uses/python.mk index 70ff43985dcc..fc650252134c 100644 --- a/Mk/Uses/python.mk +++ b/Mk/Uses/python.mk @@ -1,717 +1,717 @@ # Provide support for Python related ports. This includes detecting Python # interpreters, ports providing package and modules for python as well as # consumer ports requiring Python at build or run time. # # Feature: python # Usage: USES=python[:version-spec][,arg,...] # Valid ARGS: , patch, build, run, test, env # # version-spec Declarative specification for the Python version(s) the # port supports. Subsets and ranges can be specified: # # * # * - # * + # * - # # Examples: # # USES=python:2.7 # Supports Python 2.7 Only # USES=python:3.6+ # Supports Python 3.6 or later # USES=python:3.6-3.9 # Supports Python 3.6 to 3.9 # USES=python:-3.8 # Supports Python up to 3.8 # USES=python # Supports 3.6+ # # NOTE: should be as specific as possible, matching the versions # upstream declares support for, without being incorrect. In particular, # USES=python *without* a means 3.6+, # including unreleased versions, which is probably incorrect. # # Not specifying a should only be used when a more specific # cannot be specified due to syntax limitations, for # example: 2.7,3.4-3.6, but even in this case, X.Y+ (2.7+), or -X.Y (-3.6) # is preferred and likely more correct. # # patch Python is needed at patch time. Adds dependency to PATCH_DEPENDS. # build Python is needed at build time. Adds dependency to BUILD_DEPENDS. # run Python is needed at run time. Adds dependency to RUN_DEPENDS. # test Python is needed at test time. Adds dependency to TEST_DEPENDS. # env Does not depend on Python but needs the environment set up. This # is mainly used when depending on flavored python ports, or when a # correct PYTHON_CMD is required. It has the same effect as setting # PYTHON_NO_DEPENDS. # # If build, run and test are omitted, Python will be added as BUILD_DEPENDS, # RUN_DEPENDS and TEST_DEPENDS. # patch is independant, it does not prevent the default build/run/test # dependency. # env or PYTHON_NO_DEPENDS can be set to not add any dependencies. # # Exported variables: # # PYTHON_VERSION - The chosen Python interpreter including the version, # e.g. python2.7, python3.5, etc. # # Variables, which can be set by the port: # # USE_PYTHON - A list of additional features and functionality to # enable. Supported features are: # # concurrent - Indicates that the port can be installed for # different python versions at the same time. The port # is supposed to use a unique prefix for certain # directories using USES=uniquefiles:dirs (see the # uniquefiles.mk Uses for details about the # directories), if set to yes. Binaries receive an # additional suffix, based on ${PYTHON_VER}. # # The values for the uniquefiles USES are set as # follows: # # UNIQUE_PREFIX= ${PYTHON_PKGNAMEPREFIX} # UNIQUE_SUFFIX= -${PYTHON_VER} # # If the port is installed for the current default # python version, scripts and binaries in # # ${PREFIX}/bin # ${PREFIX}/sbin # ${PREFIX}/libexec # # are linked from the prefixed version to the # prefix-less original name, e.g. # bin/foo-2.7 --> bin/foo. # # cython - Depend on lang/cython at build-time. # # cython_run - Depend on lang/cython at run-time. # # flavors - Force creation of flavors for Python 2 and 3 default # versions, where applicable. # # noflavors - Disable automatic creation of flavors if they would # otherwise be created and they are not wanted. # # allflavors - Generate flavors for all possible versions and not # simply the default ones. Only to be used for py-* # ports that are part of the Python distribution, but # kept as separate ports. # # optsuffix - Set PKGNAMESUFFIX to PYTHON_PKGNAMESUFFIX if not the # default python version. # # distutils - Use distutils as do-configure, do-build and # do-install targets. implies flavors. # # autoplist - Automatically generates the packaging list for a # port that uses distutils when defined. # requires: distutils # # py3kplist - Automatically generates Python 3.x compatible # __pycache__ entries from a Python 2.x packaging list # when defined. Use this for ports that do *not* use # standard Python packaging mechanisms such as # distutils, and support *both* Python 2.x and 3.x. # Not needed, if USE_PYTHON=autoplist is set. # # pythonprefix - Says that the port installs in ${PYTHONBASE} instead # of ${PREFIX}. # # noegginfo - Skip an egg-info entry from plist, if defined. # # PYTHON_CMD - Python's command line file name, including the # version number (used for dependencies). # default: ${PYTHONBASE}/bin/${PYTHON_VERSION} # # PYSETUP - Name of the setup script used by the distutils # package. # default: setup.py # # PYDISTUTILS_PKGNAME # - Internal name in the distutils for egg-info. # default: ${PORTNAME} # # PYDISTUTILS_PKGVERSION # - Internal version in the distutils for egg-info. # default: ${PORTVERSION} # # PYDISTUTILS_CONFIGURE_TARGET # - Pass this command to distutils on configure stage. # default: config # # PYDISTUTILS_BUILD_TARGET # - Pass this command to distutils on build stage. # default: build # # PYDISTUTILS_INSTALL_TARGET # - Pass this command to distutils on install stage. # default: install # # PYDISTUTILS_CONFIGUREARGS # - Arguments to config with distutils. # default: # # PYDISTUTILS_BUILDARGS # - Arguments to build with distutils. # default: # # PYDISTUTILS_INSTALLARGS # - Arguments to install with distutils. # default: -c -O1 --prefix=${PREFIX} --single-version-externally-managed --root=${STAGEDIR} # # PYDISTUTILS_EGGINFO # - Canonical name for egg-info. # default: ${PYDISTUTILS_PKGNAME:C/[^A-Za-z0-9.]+/_/g}-${PYDISTUTILS_PKGVERSION:C/[^A-Za-z0-9.]+/_/g}-py${PYTHON_VER}.egg-info # # The following variables can be read by ports and must not be modified: # # PYTHONBASE - The installation prefix of the chosen Python # interpreter, e.g. /usr/local # # PYTHON_PORTVERSION # - Version number suitable for ${PORTVERSION}. # # PYTHON_PORTSDIR - The port directory of the chosen Python interpreter # # PYTHON_REL - The release number of the chosen Python interpreter # without dots, e.g. 2706, 3401, ... # # PYTHON_SUFFIX - The major-minor release number of the chosen Python # interpreter without dots, e.g. 27, 36, ... # Used for prefixes and suffixes. # # PYTHON_MAJOR_VER - The major release version of the chosen Python # interpreter, e.g. 2, 3, ... # # PYTHON_VER - The major-minor release version of the chosen Python # interpreter, e.g. 2.7, 3.6, ... # # PYTHON_ABIVER - Additional ABI flags set by the chosen Python # interpreter, e.g. md # # PYTHON_INCLUDEDIR - Location of the Python include files. # default: ${PYTHONBASE}/include/${PYTHON_VERSION} # # PYTHON_LIBDIR - Base of the python library tree # default: ${PYTHONBASE}/lib/${PYTHON_VERSION} # # PYTHON_SITELIBDIR - Location of the site-packages tree. Don't change, # unless you know what you do. # default: ${PYTHON_LIBDIR}/site-packages # # There are PREFIX-clean variants of the PYTHON_*DIR variables above. # They are meant to be used by ports instead of the above variables, so the # ports respect ${PREFIX} (unless USE_PYTHON=pythonprefix is specified). # # PYTHONPREFIX_INCLUDEDIR default: ${PREFIX}/include/${PYTHON_VERSION} # PYTHONPREFIX_LIBDIR default: ${PREFIX}/lib/${PYTHON_VERSION} # PYTHONPREFIX_SITELIBDIR default: ${PYTHONPREFIX_LIBDIR}/site-packages # # PYTHON_PLATFORM - Python's idea of the OS release. # This is faked with ${OPSYS} and ${OSREL} until we # find out how to delay defining a variable until # after a certain target has been built. # # PYTHON_PKGNAMEPREFIX # - Use this as a ${PKGNAMEPREFIX} to distinguish # packages for different Python versions. # default: py${PYTHON_SUFFIX}- # # PYTHON_PKGNAMESUFFIX # - Use this as a ${PKGNAMESUFFIX} to distinguish # packages for different Python versions. # default: -py${PYTHON_SUFFIX} # # Using USES=python also will add some useful entries to PLIST_SUB: # # PYTHON_INCLUDEDIR=${PYTHONPREFIX_INCLUDEDIR:S;${PREFIX}/;;} # PYTHON_LIBDIR=${PYTHONPREFIX_LIBDIR:S;${PREFIX}/;;} # PYTHON_PLATFORM=${PYTHON_PLATFORM} # PYTHON_SITELIBDIR=${PYTHONPREFIX_SITELIBDIR:S;${PREFIX}/;;} # PYTHON_SUFFIX=${PYTHON_SUFFIX} # PYTHON_VER=${PYTHON_VER} # PYTHON_VERSION=${PYTHON_VERSION} # # and PYTHON2 and PYTHON3 will be set according to the Python version: # # PYTHON2="" PYTHON3="@comment " for Python 2.x # PYTHON2="@comment " PYTHON3="" for Python 3.x # # PYDISTUTILS_INSTALLNOSINGLE # - Deprecated without replacement # # MAINTAINER: python@FreeBSD.org .if !defined(_INCLUDE_USES_PYTHON_MK) _INCLUDE_USES_PYTHON_MK= yes # What Python version and what Python interpreters are currently supported? # When adding a version, please keep the comment in # Mk/bsd.default-versions.mk in sync. -_PYTHON_VERSIONS= 2.7 3.8 3.9 3.7 3.6 # preferred first -_PYTHON_PORTBRANCH= 2.7 # ${_PYTHON_VERSIONS:[1]} +_PYTHON_VERSIONS= 3.8 3.9 3.7 3.6 2.7 # preferred first +_PYTHON_PORTBRANCH= 3.8 # ${_PYTHON_VERSIONS:[1]} _PYTHON_BASECMD= ${LOCALBASE}/bin/python _PYTHON_RELPORTDIR= lang/python # List all valid USE_PYTHON features here _VALID_PYTHON_FEATURES= allflavors autoplist concurrent cython cython_run \ distutils flavors noegginfo noflavors optsuffix \ py3kplist pythonprefix _INVALID_PYTHON_FEATURES= .for var in ${USE_PYTHON} . if empty(_VALID_PYTHON_FEATURES:M${var}) _INVALID_PYTHON_FEATURES+= ${var} . endif .endfor .if !empty(_INVALID_PYTHON_FEATURES) IGNORE= uses unknown USE_PYTHON features: ${_INVALID_PYTHON_FEATURES} .endif # Make each individual feature available as _PYTHON_FEATURE_ .for var in ${USE_PYTHON} _PYTHON_FEATURE_${var:C/=.*$//:tu}= ${var:C/.*=//:S/,/ /g} .endfor # distutils automatically generates flavors depending on the supported # versions. .if defined(_PYTHON_FEATURE_DISTUTILS) _PYTHON_FEATURE_FLAVORS= yes .endif .if defined(_PYTHON_FEATURE_NOFLAVORS) .undef _PYTHON_FEATURE_FLAVORS .endif # Make sure that no dependency or some other environment variable # pollutes the build/run dependency detection .undef _PYTHON_BUILD_DEP .undef _PYTHON_RUN_DEP .undef _PYTHON_TEST_DEP _PYTHON_ARGS= ${python_ARGS:S/,/ /g} .if ${_PYTHON_ARGS:Mpatch} _PYTHON_PATCH_DEP= yes _PYTHON_ARGS:= ${_PYTHON_ARGS:Npatch} .endif .if ${_PYTHON_ARGS:Mbuild} _PYTHON_BUILD_DEP= yes _PYTHON_ARGS:= ${_PYTHON_ARGS:Nbuild} .endif .if ${_PYTHON_ARGS:Mrun} _PYTHON_RUN_DEP= yes _PYTHON_ARGS:= ${_PYTHON_ARGS:Nrun} .endif .if ${_PYTHON_ARGS:Mtest} _PYTHON_TEST_DEP= yes _PYTHON_ARGS:= ${_PYTHON_ARGS:Ntest} .endif .if ${_PYTHON_ARGS:Menv} PYTHON_NO_DEPENDS= yes _PYTHON_ARGS:= ${_PYTHON_ARGS:Nenv} .endif # The port does not specify a build, run or test dependency, assume all are # required. .if !defined(_PYTHON_BUILD_DEP) && !defined(_PYTHON_RUN_DEP) && \ !defined(_PYTHON_TEST_DEP) && !defined(PYTHON_NO_DEPENDS) _PYTHON_BUILD_DEP= yes _PYTHON_RUN_DEP= yes _PYTHON_TEST_DEP= yes .endif .if ${PYTHON2_DEFAULT} != ${PYTHON_DEFAULT} && ${PYTHON3_DEFAULT} != ${PYTHON_DEFAULT} WARNING+= "PYTHON_DEFAULT must be a version present in PYTHON2_DEFAULT or PYTHON3_DEFAULT, if you want more Python flavors, set BUILD_ALL_PYTHON_FLAVORS in your make.conf" .endif .if ${_PYTHON_ARGS} == 2.7 DEV_WARNING+= "lang/python27 reached End of Life and will be removed on 2020-12-31, consider converting to a modern version of python" .elif ${_PYTHON_ARGS} == 2 DEV_ERROR+= "USES=python:2 is no longer supported, use USES=python:2.7" .elif ${_PYTHON_ARGS} == 3 DEV_ERROR+= "USES=python:3 is no longer supported, use USES=python:3.6+ or an appropriate version range" .endif # ${_PYTHON_ARGS} == 2.7 _PYTHON_VERSION:= ${PYTHON_DEFAULT} .if empty(_PYTHON_ARGS) _PYTHON_ARGS= 3.6+ .endif # Validate Python version whether it meets the version restriction. _PYTHON_VERSION_CHECK:= ${_PYTHON_ARGS:C/^([1-9]\.[0-9])$/\1-\1/} _PYTHON_VERSION_MINIMUM_TMP:= ${_PYTHON_VERSION_CHECK:C/([1-9]\.[0-9])[-+].*/\1/} _PYTHON_VERSION_MINIMUM:= ${_PYTHON_VERSION_MINIMUM_TMP:M[1-9].[0-9]} _PYTHON_VERSION_MAXIMUM_TMP:= ${_PYTHON_VERSION_CHECK:C/.*-([1-9]\.[0-9])/\1/} _PYTHON_VERSION_MAXIMUM:= ${_PYTHON_VERSION_MAXIMUM_TMP:M[1-9].[0-9]} # At this point we should have no argument left in ${_PYTHON_ARGS} # except a version spec _PYTHON_ARGS:= ${_PYTHON_ARGS:N[1-9].[0-9]-[1-9].[0-9]:N[1-9].[0-9]:N[1-9].[0-9]+:N-[1-9].[0-9]} .if !empty(_PYTHON_ARGS) IGNORE= uses unknown USES=python arguments: ${_PYTHON_ARGS} .endif .undef _PYTHON_VERSION_NONSUPPORTED .if !empty(_PYTHON_VERSION_MINIMUM) && (${_PYTHON_VERSION} < ${_PYTHON_VERSION_MINIMUM}) _PYTHON_VERSION_NONSUPPORTED= ${_PYTHON_VERSION_MINIMUM} at least .elif !empty(_PYTHON_VERSION_MAXIMUM) && (${_PYTHON_VERSION} > ${_PYTHON_VERSION_MAXIMUM}) _PYTHON_VERSION_NONSUPPORTED= ${_PYTHON_VERSION_MAXIMUM} at most .endif # If we have an unsupported version of Python, try another. .if defined(_PYTHON_VERSION_NONSUPPORTED) .undef _PYTHON_VERSION .for ver in ${PYTHON2_DEFAULT} ${PYTHON3_DEFAULT} ${_PYTHON_VERSIONS} __VER= ${ver} .if !defined(_PYTHON_VERSION) && \ !(!empty(_PYTHON_VERSION_MINIMUM) && ( \ ${__VER} < ${_PYTHON_VERSION_MINIMUM})) && \ !(!empty(_PYTHON_VERSION_MAXIMUM) && ( \ ${__VER} > ${_PYTHON_VERSION_MAXIMUM})) _PYTHON_VERSION= ${ver} .endif .endfor .if !defined(_PYTHON_VERSION) IGNORE= needs an unsupported version of Python .endif .endif # defined(_PYTHON_VERSION_NONSUPPORTED) # Automatically generates FLAVORS if empty .if empty(FLAVORS) && defined(_PYTHON_FEATURE_FLAVORS) . undef _VALID_PYTHON_VERSIONS . for ver in ${PYTHON_DEFAULT} ${PYTHON2_DEFAULT} ${PYTHON3_DEFAULT} ${_PYTHON_VERSIONS} __VER= ${ver} . if !(!empty(_PYTHON_VERSION_MINIMUM) && ( \ ${__VER} < ${_PYTHON_VERSION_MINIMUM})) && \ !(!empty(_PYTHON_VERSION_MAXIMUM) && ( \ ${__VER} > ${_PYTHON_VERSION_MAXIMUM})) . if empty(_VALID_PYTHON_VERSIONS:M${ver}) _VALID_PYTHON_VERSIONS+= ${ver} . endif . endif . endfor # Get all possible flavors depending on version requirements . if defined(_VALID_PYTHON_VERSIONS) _ALL_PYTHON_FLAVORS= ${_VALID_PYTHON_VERSIONS:S/.//:S/^/py/} . else _ALL_PYTHON_FLAVORS= ${_PYTHON_VERSIONS:S/.//:S/^/py/} . endif # Decide how many flavors we want. By default, only generate the default # versions. . if defined(BUILD_ALL_PYTHON_FLAVORS) || defined(_PYTHON_FEATURE_ALLFLAVORS) FLAVORS= ${_ALL_PYTHON_FLAVORS} . else . for _v in ${PYTHON_DEFAULT} ${PYTHON2_DEFAULT} ${PYTHON3_DEFAULT} _f= py${_v:S/.//} . if ${_ALL_PYTHON_FLAVORS:M${_f}} && !${FLAVORS:M${_f}} .if !empty(FLAVORS) FLAVORS:= ${FLAVORS} ${_f} .else FLAVORS:= ${_f} .endif . endif . endfor . endif . if !empty(FLAVORS) && empty(FLAVOR) FLAVOR= ${FLAVORS:[1]} . endif .endif .if ${FLAVOR:Mpy[23][0-9]} _PYTHON_VERSION= ${FLAVOR:S/py//:C/(.)/\1./} .endif .if !empty(FLAVOR) && ${_PYTHON_VERSION} != ${PYTHON_DEFAULT} .if defined(_PYTHON_FEATURE_OPTSUFFIX) DEV_WARNING+= "USE_PYTHON=optsuffix is deprecated, consider migrating to using unconditional PKGNAMESUFFIX or PKGNAMEPREFIX" PKGNAMESUFFIX= ${PYTHON_PKGNAMESUFFIX} .endif .endif # To avoid having dependencies with @ and empty flavor: # _PYTHON_VERSION is either set by (first that matches): # - If using Python flavors, from the current Python flavor # - If using a version restriction (USES=python:3.6+), from the first # acceptable default Python version. # - From PYTHON_DEFAULT PY_FLAVOR= py${_PYTHON_VERSION:S/.//} PYTHON_VERSION= python${_PYTHON_VERSION} # Got the correct python version, set some publicly accessible variables PYTHON_VER= ${_PYTHON_VERSION} PYTHON_SUFFIX= ${_PYTHON_VERSION:S/.//g} PYTHON_MAJOR_VER= ${PYTHON_VER:R} PYTHON_REL= # empty PYTHON_ABIVER= # empty PYTHON_PORTSDIR= ${_PYTHON_RELPORTDIR}${PYTHON_SUFFIX} # Protect partial checkouts from Mk/Scripts/functions.sh:export_ports_env(). .if !defined(_PORTS_ENV_CHECK) || exists(${PORTSDIR}/${PYTHON_PORTSDIR}) .include "${PORTSDIR}/${PYTHON_PORTSDIR}/Makefile.version" .endif # Create a 4 integer version string, prefixing 0 to the last token if # it's a single character. Only use the the first 3 tokens of # PORTVERSION to support pre-release versions (rc3, alpha4, etc) of # any Python port (lang/pythonXY) PYTHON_REL= ${PYTHON_PORTVERSION:C/^([0-9]+\.[0-9]+\.[0-9]+).*/\1/:C/\.([0-9]+)$/.0\1/:C/\.0?([0-9][0-9])$/.\1/:S/.//g} # Might be overridden by calling ports PYTHON_CMD?= ${_PYTHON_BASECMD}${_PYTHON_VERSION} .if ${PYTHON_VER} != 2.7 .if exists(${PYTHON_CMD}-config) PYTHON_ABIVER!= ${PYTHON_CMD}-config --abiflags .elif ${PYTHON_REL} < 3800 # Default ABI flags for lang/python3[67] ports PYTHON_ABIVER= m .endif .endif .if ${PYTHON_REL} >= 3807 PYTHON_EXT_SUFFIX= .cpython-${PYTHON_SUFFIX} .else PYTHON_EXT_SUFFIX= # empty .endif .if ${PYTHON_MAJOR_VER} == 2 DEPRECATED?= Uses Python 2.7 which is EOLed upstream EXPIRATION_DATE?= 2020-12-31 .endif .if !defined(PYTHONBASE) PYTHONBASE!= (${PYTHON_CMD} -c 'import sys; print(sys.prefix)' \ 2> /dev/null || ${ECHO_CMD} ${LOCALBASE}) | ${TAIL} -1 .endif _EXPORTED_VARS+= PYTHONBASE PYTHON_INCLUDEDIR= ${PYTHONBASE}/include/python${_PYTHON_VERSION}${PYTHON_ABIVER} PYTHON_LIBDIR= ${PYTHONBASE}/lib/python${_PYTHON_VERSION} PYTHON_PLATFORM= ${OPSYS:tl}${OSREL:C/\.[0-9.]*//} PYTHON_SITELIBDIR= ${PYTHON_LIBDIR}/site-packages PYTHON_PKGNAMEPREFIX= py${PYTHON_SUFFIX}- PYTHON_PKGNAMESUFFIX= -py${PYTHON_SUFFIX} PYTHONPREFIX_INCLUDEDIR= ${PYTHON_INCLUDEDIR:S;${PYTHONBASE};${PREFIX};} PYTHONPREFIX_LIBDIR= ${PYTHON_LIBDIR:S;${PYTHONBASE};${PREFIX};} PYTHONPREFIX_SITELIBDIR= ${PYTHON_SITELIBDIR:S;${PYTHONBASE};${PREFIX};} # Used for recording the installed files. _PYTHONPKGLIST= ${WRKDIR}/.PLIST.pymodtmp # Ports bound to a certain python version SHOULD # - use the PYTHON_PKGNAMEPREFIX # - use directories using the PYTHON_PKGNAMEPREFIX # - install binaries using the required PYTHON_VER, with # the default python version creating a symlink to the original binary # name (for staging-aware ports). # # What makes a port 'bound' to a certain python version? # - it installs data into PYTHON_SITELIBDIR, PYTHON_INCLUDEDIR, ... # - it links against libpython*.so # - it uses USE_PYTHON=distutils # .if defined(_PYTHON_FEATURE_CYTHON) BUILD_DEPENDS+= cython-${PYTHON_VER}:lang/cython@${PY_FLAVOR} .endif .if defined(_PYTHON_FEATURE_CYTHON_RUN) RUN_DEPENDS+= cython-${PYTHON_VER}:lang/cython@${PY_FLAVOR} .endif .if defined(_PYTHON_FEATURE_CONCURRENT) .if !defined(_PYTHON_FEATURE_FLAVORS) && (${_PYTHON_VERSION_MINIMUM:M3*} || ${_PYTHON_VERSION_MAXIMUM:M2*}) DEV_WARNING+= "USE_PYTHON=concurrent when only one of Python 2 or 3 is supported AND not using flavors does not make any sense" .endif _USES_POST+= uniquefiles:dirs .if defined(_PYTHON_FEATURE_FLAVORS) && ${FLAVOR} == ${FLAVORS:[1]} UNIQUE_DEFAULT_LINKS= yes .elif !defined(_PYTHON_FEATURE_FLAVORS) && ${_PYTHON_VERSION} == ${PYTHON_DEFAULT} UNIQUE_DEFAULT_LINKS= yes .else UNIQUE_DEFAULT_LINKS= no .endif UNIQUE_PREFIX= ${PYTHON_PKGNAMEPREFIX} UNIQUE_SUFFIX= -${PYTHON_VER} UNIQUE_SUFFIX_TYPES+= SUFFIX_MAN UNIQUE_SUFFIX_MAN_WITH_EXT= .[1-9ln] UNIQUE_SUFFIX_MAN_EXTRA_EXT= .gz .if defined(_PYTHON_FEATURE_AUTOPLIST) _UNIQUE_FIND_SUFFIX_FILES= ${SED} -e 's|^${PREFIX}/||' ${_PYTHONPKGLIST} ${TMPPLIST} .else _UNIQUE_FIND_SUFFIX_FILES= ${SED} -e 's|^${PREFIX}/||' ${TMPPLIST} 2>/dev/null .endif UNIQUE_FIND_SUFFIX_FILES+= ${_UNIQUE_FIND_SUFFIX_FILES} | \ ${EGREP} -he '^bin/.*$$|^sbin/.*$$|^libexec/.*$$' UNIQUE_FIND_SUFFIX_MAN_FILES+= ${_UNIQUE_FIND_SUFFIX_FILES} | \ ${EGREP} -he '^man/man[1-9ln]/.*$$|^share/man/man[1-9ln]/.*$$' .endif # defined(_PYTHON_FEATURE_CONCURRENT) _CURRENTPORT:= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} .if defined(_PYTHON_FEATURE_DISTUTILS) && \ ${_CURRENTPORT} != ${PYTHON_PKGNAMEPREFIX}setuptools BUILD_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}setuptools>0:devel/py-setuptools@${PY_FLAVOR} RUN_DEPENDS+= ${PYTHON_PKGNAMEPREFIX}setuptools>0:devel/py-setuptools@${PY_FLAVOR} .endif # distutils support PYSETUP?= setup.py PYDISTUTILS_SETUP?= -c \ "import sys; import setuptools; \ __file__='${PYSETUP}'; sys.argv[0]='${PYSETUP}'; \ exec(compile(open(__file__, 'rb').read().replace(b'\\r\\n', b'\\n'), __file__, 'exec'))" PYDISTUTILS_CONFIGUREARGS?= # empty PYDISTUTILS_BUILDARGS?= # empty PYDISTUTILS_INSTALLARGS?= -c -O1 --prefix=${PREFIX} .if defined(_PYTHON_FEATURE_DISTUTILS) . if !defined(PYDISTUTILS_INSTALLNOSINGLE) PYDISTUTILS_INSTALLARGS+= --single-version-externally-managed . endif PYDISTUTILS_INSTALLARGS+= --root=${STAGEDIR} .endif PYDISTUTILS_INSTALLARGS:= --record ${_PYTHONPKGLIST} \ ${PYDISTUTILS_INSTALLARGS} PYDISTUTILS_PKGNAME?= ${PORTNAME} PYDISTUTILS_PKGVERSION?=${PORTVERSION} PYDISTUTILS_EGGINFO?= ${PYDISTUTILS_PKGNAME:C/[^A-Za-z0-9.]+/_/g}-${PYDISTUTILS_PKGVERSION:C/[^A-Za-z0-9.]+/_/g}-py${PYTHON_VER}.egg-info PYDISTUTILS_EGGINFODIR?=${STAGEDIR}${PYTHONPREFIX_SITELIBDIR} .if !defined(_PYTHON_FEATURE_NOEGGINFO) && \ !defined(_PYTHON_FEATURE_AUTOPLIST) && \ defined(_PYTHON_FEATURE_DISTUTILS) && \ defined(PYTHON_REL) _USES_stage+= 933:add-plist-egginfo add-plist-egginfo: . for egginfo in ${PYDISTUTILS_EGGINFO} if [ -d "${PYDISTUTILS_EGGINFODIR}/${egginfo}" ]; then \ ${LS} ${PYDISTUTILS_EGGINFODIR}/${egginfo} | while read f; do \ ${ECHO_CMD} ${PYDISTUTILS_EGGINFODIR:S;^${STAGEDIR}${PREFIX}/;;}/${egginfo}/$${f} >> ${TMPPLIST}; \ done; \ fi; . endfor .endif .if defined(_PYTHON_FEATURE_AUTOPLIST) && defined(_PYTHON_FEATURE_DISTUTILS) _RELSITELIBDIR= ${PYTHONPREFIX_SITELIBDIR:S;${PREFIX}/;;} _RELLIBDIR= ${PYTHONPREFIX_LIBDIR:S;${PREFIX}/;;} _USES_stage+= 934:add-plist-pymod add-plist-pymod: @${SED} -e 's|^"\(.*\)"$$|\1|' \ -e 's|^${STAGEDIR}${PREFIX}/||' \ -e 's|^${PREFIX}/||' \ -e 's|^\(man/.*man[0-9]\)/\(.*\.[0-9]\)$$|\1/\2.gz|' \ -e 's|^\(share/man/.*man[0-9]\)/\(.*\.[0-9]\)$$|\1/\2.gz|' \ -e 's|[[:alnum:]|[:space:]]*/\.\./*||g; s|/\./|/|g' \ ${_PYTHONPKGLIST} | ${SORT} >> ${TMPPLIST} .else .if ${PYTHON_REL} >= 3200 && defined(_PYTHON_FEATURE_PY3KPLIST) # When Python version is 3.2+ we rewrite all the filenames # of TMPPLIST that end with .py[co], so that they conform # to PEP 3147 (see https://www.python.org/dev/peps/pep-3147/) PYMAGICTAG= ${PYTHON_CMD} -c 'import sys; print(sys.implementation.cache_tag)' _USES_stage+= 935:add-plist-python add-plist-python: @${AWK} '\ /\.py[co]$$/ && !($$0 ~ "/" pc "/") {id = match($$0, /\/[^\/]+\.py[co]$$/); if (id != 0) {d = substr($$0, 1, RSTART - 1); dirs[d] = 1}; sub(/\.pyc$$/, "." mt "&"); sub(/\.pyo$$/, "." mt "." pyo); sub(/[^\/]+\.py[co]$$/, pc "/&"); print; next} \ /^@dirrm / {d = substr($$0, 8); if (d in dirs) {print $$0 "/" pc}; print $$0; next} \ /^@dirrmtry / {d = substr($$0, 11); if (d in dirs) {print $$0 "/" pc}; print $$0; next} \ {print} \ ' \ pc="__pycache__" mt="$$(${PYMAGICTAG})" pyo="opt-1.pyc" \ ${TMPPLIST} > ${TMPPLIST}.pyc_tmp @${MV} ${TMPPLIST}.pyc_tmp ${TMPPLIST} .endif # ${PYTHON_REL} >= 3200 && defined(_PYTHON_FEATURE_PY3KPLIST) .endif # defined(_PYTHON_FEATURE_AUTOPLIST) && defined(_PYTHON_FEATURE_DISTUTILS) # Fix for programs that build python from a GNU auto* environment CONFIGURE_ENV+= PYTHON="${PYTHON_CMD}" # By default CMake picks up the highest available version of Python package. # Enforce the version required by the port or the default. CMAKE_ARGS+= -DPython_ADDITIONAL_VERSIONS=${PYTHON_VER} # Python 3rd-party modules PYGAME= ${PYTHON_PKGNAMEPREFIX}game>0:devel/py-game@${PY_FLAVOR} PYNUMPY= ${PYTHON_PKGNAMEPREFIX}numpy>=1.16,1<1.20,1:math/py-numpy@${PY_FLAVOR} # Common Python modules that can be needed but only for some versions of Python. .if ${PYTHON_REL} < 3500 PY_PYGMENTS= ${PYTHON_PKGNAMEPREFIX}pygments-25>=2.5.1<3:textproc/py-pygments-25@${PY_FLAVOR} .else PY_PILLOW= ${PYTHON_PKGNAMEPREFIX}pillow>=7.0.0:graphics/py-pillow@${PY_FLAVOR} PY_PYGMENTS= ${PYTHON_PKGNAMEPREFIX}pygments>=2.5.1<3:textproc/py-pygments@${PY_FLAVOR} .endif .if ${PYTHON_VER} != ${PYTHON_DEFAULT} PY_MERCURIAL= ${PYTHON_PKGNAMEPREFIX}mercurial>=5.5:devel/mercurial@${PY_FLAVOR} .else PY_MERCURIAL= mercurial>=5.5:devel/mercurial@${PY_FLAVOR} .endif CMAKE_ARGS+= -DBOOST_PYTHON_SUFFIX:STRING=${PYTHON_SUFFIX} PY_BOOST_LIB= boost_python${PYTHON_SUFFIX} PY_BOOST= lib${PY_BOOST_LIB}.so:devel/boost-python-libs@${PY_FLAVOR} # dependencies .for _stage in PATCH BUILD RUN TEST . if defined(_PYTHON_${_stage}_DEP) ${_stage}_DEPENDS+= ${PYTHON_CMD}:${PYTHON_PORTSDIR} . endif .endfor # set $PREFIX as Python's one .if defined(_PYTHON_FEATURE_PYTHONPREFIX) PREFIX= ${PYTHONBASE} .endif # Substitutions for pkg-plist # Use a short form of the PYTHONPREFIX_*DIR variables; we don't need the # base directory in the plist file. PLIST_SUB+= PYTHON_INCLUDEDIR=${PYTHONPREFIX_INCLUDEDIR:S;${PREFIX}/;;} \ PYTHON_LIBDIR=${PYTHONPREFIX_LIBDIR:S;${PREFIX}/;;} \ PYTHON_PLATFORM=${PYTHON_PLATFORM} \ PYTHON_SITELIBDIR=${PYTHONPREFIX_SITELIBDIR:S;${PREFIX}/;;} \ PYTHON_SUFFIX=${PYTHON_SUFFIX} \ PYTHON_EXT_SUFFIX=${PYTHON_EXT_SUFFIX} \ PYTHON_VER=${PYTHON_VER} \ PYTHON_VERSION=${PYTHON_VERSION} .if ${PYTHON_REL} < 3000 PLIST_SUB+= PYTHON2="" PYTHON3="@comment " .else PLIST_SUB+= PYTHON2="@comment " PYTHON3="" .endif _USES_POST+= python .endif # _INCLUDE_USES_PYTHON_MK .if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PYTHON_POST_MK) _INCLUDE_USES_PYTHON_POST_MK= yes # py-distutils support PYDISTUTILS_CONFIGURE_TARGET?= config PYDISTUTILS_BUILD_TARGET?= build PYDISTUTILS_INSTALL_TARGET?= install .if defined(_PYTHON_FEATURE_DISTUTILS) LDSHARED?= ${CC} -shared MAKE_ENV+= LDSHARED="${LDSHARED}" PYTHONDONTWRITEBYTECODE= PYTHONOPTIMIZE= .if !target(do-configure) && !defined(HAS_CONFIGURE) && !defined(GNU_CONFIGURE) do-configure: @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PYTHON_CMD} ${PYDISTUTILS_SETUP} ${PYDISTUTILS_CONFIGURE_TARGET} ${PYDISTUTILS_CONFIGUREARGS}) .endif .if !target(do-build) do-build: @(cd ${BUILD_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PYTHON_CMD} ${PYDISTUTILS_SETUP} ${PYDISTUTILS_BUILD_TARGET} ${PYDISTUTILS_BUILDARGS}) .endif .if !target(do-install) do-install: @(cd ${INSTALL_WRKSRC}; ${SETENV} ${MAKE_ENV} ${PYTHON_CMD} ${PYDISTUTILS_SETUP} ${PYDISTUTILS_INSTALL_TARGET} ${PYDISTUTILS_INSTALLARGS}) .endif .endif # defined(_PYTHON_FEATURE_DISTUTILS) .endif # defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_PYTHON_POST_MK)