Page MenuHomeFreeBSD
Differential D32538 Diff 97009 sys/contrib/device-tree/src/arm/qcom-ipq4018-rt-ac58u.dts

Changeset View

Standalone View

View Options

sys/contrib/device-tree/src/arm/qcom-ipq4018-rt-ac58u.dts

  • This file was added.
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
impUnsubmitted
Not Done
Inline Actions

same comment as manu's here: Either pull this in from upstream, or put it elsewhere.

imp: same comment as manu's here: Either pull this in from upstream, or put it elsewhere.
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ASUS RT-AC58U";
compatible = "asus,rt-ac58u";
memory {
device_type = "memory";
reg = <0x80000000 0x8000000>;
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
serial0 = &blsp1_uart1;
};
chosen {
bootargs-append = " ubi.mtd=UBI_DEV";
// stdout-path = "serial0:115200n8";
stdout-path = "serial0";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb3@8af8800 {
status = "okay";
dwc3@8a00000 {
#address-cells = <1>;
#size-cells = <0>;
usb3_port1: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
usb3_port2: port@2 {
reg = <2>;
#trigger-source-cells = <0>;
};
};
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: status {
label = "blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
wan {
label = "blue:wan";
gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
};
wlan2G {
label = "blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5G {
label = "blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
usb {
label = "blue:usb";
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&usb3_port1>, <&usb3_port2>;
linux,default-trigger = "usbport";
};
lan {
label = "blue:lan";
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
};
};
};
&cryptobam {
status = "okay";
};
&blsp_dma {
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio60", "gpio61";
function = "blsp_uart0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
mux {
function = "blsp_spi0";
pins = "gpio55", "gpio56", "gpio57";
drive-strength = <12>;
bias-disable;
};
mux_cs {
function = "gpio";
pins = "gpio54", "gpio59";
drive-strength = <2>;
bias-disable;
output-high;
};
};
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
<&tlmm 59 GPIO_ACTIVE_HIGH>;
flash@0 {
/*
* U-boot looks for "n25q128a11" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x00040000 0x00020000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x00060000 0x00060000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0x000c0000 0x00010000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0x000d0000 0x00010000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV"; /* uboot env*/
reg = <0x000e0000 0x00010000>;
read-only;
};
partition@f0000 {
label = "APPSBL"; /* uboot */
reg = <0x000f0000 0x00080000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x00170000 0x00010000>;
read-only;
};
/* 0x00180000 - 0x00200000 unused */
};
};
spi-nand@1 {
compatible = "spi-nand";
reg = <1>;
spi-max-frequency = <30000000>;
/*
* U-boot looks for "spinand,mt29f" node,
* if we don't have it, it will spit out the following warning:
* "ipq: fdt fixup unable to find compatible node".
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
/*
* TODO: change to label = "ubi" once we drop 4.14.
* also drop the bootargs-append and all the
* userspace CI_UBIPART="UBI_DEV" remains.
*/
label = "UBI_DEV";
reg = <0x00000000 0x08000000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};