Changeset View
Changeset View
Standalone View
Standalone View
sys/boot/fdt/dts/powerpc/p5020ds.dts
Context not available. | |||||
emi1_rgmii = &hydra_mdio_rgmii; | emi1_rgmii = &hydra_mdio_rgmii; | ||||
emi1_sgmii = &hydra_mdio_sgmii; | emi1_sgmii = &hydra_mdio_sgmii; | ||||
emi2_xgmii = &hydra_mdio_xgmii; | emi2_xgmii = &hydra_mdio_xgmii; | ||||
soc = &soc; | |||||
andrew: Seems unrelated? | |||||
jhibbitsAuthorUnsubmitted Not Done Inline ActionsYup, unrelated. This and a few more were the result of not sanitizing my diff well enough. jhibbits: Yup, unrelated. This and a few more were the result of not sanitizing my diff well enough. | |||||
}; | }; | ||||
memory { | memory { | ||||
device_type = "memory"; | device_type = "memory"; | ||||
reg = <0x00000000 0x00000000 0x00000000 0x80000000>; | reg = <0x00000000 0x00000000 0x00000000 0xc0000000>; | ||||
}; | }; | ||||
dcsr: dcsr@f00000000 { | dcsr: dcsr@f00000000 { | ||||
Context not available. | |||||
enet3: ethernet@e6000 { | enet3: ethernet@e6000 { | ||||
tbi-handle = <&tbi3>; | tbi-handle = <&tbi3>; | ||||
phy-handle = <&phy_sgmii_1f>; | phy-handle = <&phy_rgmii_0>; | ||||
phy-connection-type = "sgmii"; | phy-connection-type = "rgmii"; | ||||
local-mac-address = [ 00 50 c2 20 db 11 ]; | |||||
adrianUnsubmitted Done Inline Actionsalso unrelated? (likely "oh I can now use the board, woo!" changes.) adrian: also unrelated? (likely "oh I can now use the board, woo!" changes.) | |||||
}; | }; | ||||
mdio@e7120 { | mdio@e7120 { | ||||
Context not available. | |||||
tbi-handle = <&tbi4>; | tbi-handle = <&tbi4>; | ||||
phy-handle = <&phy_rgmii_1>; | phy-handle = <&phy_rgmii_1>; | ||||
phy-connection-type = "rgmii"; | phy-connection-type = "rgmii"; | ||||
local-mac-address = [ 00 50 c2 20 db 12 ]; | |||||
}; | }; | ||||
mdio@e9120 { | mdio@e9120 { | ||||
Context not available. | |||||
pci0: pcie@ffe200000 { | pci0: pcie@ffe200000 { | ||||
reg = <0xf 0xfe200000 0 0x1000>; | reg = <0xf 0xfe200000 0 0x1000>; | ||||
ranges = <0x02000000 0 0x80000000 0x0 0x80000000 0x0 0x10000000 | //ranges = <0x02000000 0 0x80000000 0x0 0x80000000 0x0 0x10000000 | ||||
0x01000000 0 0x00000000 0x0 0xff000000 0x0 0x00010000>; | // 0x01000000 0 0x00000000 0x0 0xff000000 0x0 0x00010000>; | ||||
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 | |||||
0x1000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; | |||||
pcie@0 { | pcie@0 { | ||||
ranges = <0x02000000 0 0x80000000 | ranges = <0x02000000 0 0x80000000 | ||||
0x02000000 0 0x80000000 | 0x02000000 0 0x80000000 | ||||
Context not available. | |||||
pci1: pcie@ffe201000 { | pci1: pcie@ffe201000 { | ||||
reg = <0xf 0xfe201000 0 0x1000>; | reg = <0xf 0xfe201000 0 0x1000>; | ||||
ranges = <0x02000000 0x0 0x90000000 0x0 0x90000000 0x0 0x10000000 | //ranges = <0x02000000 0x0 0x90000000 0x0 0x90000000 0x0 0x10000000 | ||||
0x01000000 0x0 0x00000000 0x0 0xff010000 0x0 0x00010000>; | // 0x01000000 0x0 0x00000000 0x0 0xff010000 0x0 0x00010000>; | ||||
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 | |||||
0x1000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; | |||||
pcie@0 { | pcie@0 { | ||||
ranges = <0x02000000 0 0x90000000 | ranges = <0x02000000 0 0x90000000 | ||||
0x02000000 0 0x90000000 | 0x02000000 0 0x90000000 | ||||
Context not available. | |||||
pci2: pcie@ffe202000 { | pci2: pcie@ffe202000 { | ||||
reg = <0xf 0xfe202000 0 0x1000>; | reg = <0xf 0xfe202000 0 0x1000>; | ||||
ranges = <0x02000000 0 0xa0000000 0x0 0xa0000000 0 0x10000000 | //ranges = <0x02000000 0 0xa0000000 0x0 0xa0000000 0 0x10000000 | ||||
0x01000000 0 0x00000000 0x0 0xff020000 0 0x00010000>; | // 0x01000000 0 0x00000000 0x0 0xff020000 0 0x00010000>; | ||||
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 | |||||
0x1000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000>; | |||||
pcie@0 { | pcie@0 { | ||||
ranges = <0x02000000 0 0xa0000000 | ranges = <0x02000000 0 0xa0000000 | ||||
0x02000000 0 0xa0000000 | 0x02000000 0 0xa0000000 | ||||
Context not available. | |||||
pci3: pcie@ffe203000 { | pci3: pcie@ffe203000 { | ||||
reg = <0xf 0xfe203000 0 0x1000>; | reg = <0xf 0xfe203000 0 0x1000>; | ||||
ranges = <0x02000000 0 0xb0000000 0x0 0xb0000000 0 0x08000000 | //ranges = <0x02000000 0 0xb0000000 0x0 0xb0000000 0 0x08000000 | ||||
0x01000000 0 0x00000000 0x0 0xff030000 0 0x00010000>; | // 0x01000000 0 0x00000000 0x0 0xff030000 0 0x00010000>; | ||||
ranges = <0x2000000 0x0 0xe0000000 0xc 0x60000000 0x0 0x20000000 | |||||
0x1000000 0x0 0x00000000 0xf 0xf8030000 0x0 0x00010000>; | |||||
pcie@0 { | pcie@0 { | ||||
ranges = <0x02000000 0 0xb0000000 | ranges = <0x02000000 0 0xb0000000 | ||||
0x02000000 0 0xb0000000 | 0x02000000 0 0xb0000000 | ||||
Context not available. | |||||
compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | ||||
fsl,qman-channel = <&qpool1>; | fsl,qman-channel = <&qpool1>; | ||||
fsl,fman-mac = <&enet0>; | fsl,fman-mac = <&enet0>; | ||||
status = "okay"; | status = "disabled"; | ||||
}; | }; | ||||
ethernet@1 { | ethernet@1 { | ||||
compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | ||||
Context not available. | |||||
compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | ||||
fsl,qman-channel = <&qpool1>; | fsl,qman-channel = <&qpool1>; | ||||
fsl,fman-mac = <&enet3>; | fsl,fman-mac = <&enet3>; | ||||
status = "disabled"; | status = "okay"; | ||||
}; | }; | ||||
ethernet@4 { | ethernet@4 { | ||||
compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; | ||||
Context not available. |
Seems unrelated?