Differential D30733 Diff 93982 sys/dev/ixl/ixl_pf_iflib.c

Changeset View

Standalone View

sys/dev/ixl/ixl_pf_iflib.c

	Show First 20 Lines • Show All 397 Lines • ▼ Show 20 Lines
	/*			/*
	** Run when the Admin Queue gets a link state change interrupt.			** Run when the Admin Queue gets a link state change interrupt.
	*/			*/
	void			void
	ixl_link_event(struct ixl_pf pf, struct i40e_arq_event_info e)			ixl_link_event(struct ixl_pf pf, struct i40e_arq_event_info e)
	{			{
	struct i40e_hw *hw = &pf->hw;			struct i40e_hw *hw = &pf->hw;
	device_t dev = iflib_get_dev(pf->vsi.ctx);			device_t dev = iflib_get_dev(pf->vsi.ctx);
	struct i40e_aqc_get_link_status *status =			struct i40e_link_status *link_info = &hw->phy.link_info;
	(struct i40e_aqc_get_link_status *)&e->desc.params.raw;

	/* Request link status from adapter */			/* Driver needs to re-enable delivering of link status events
				* by FW after each event reception. Call i40e_get_link_status
				* to do that. To not lose information about link state changes,
				* which happened between receiving an event and the call,
				* do not rely on status from event but use most recent
				* status information retrieved by the call. */
	hw->phy.get_link_info = TRUE;			hw->phy.get_link_info = TRUE;
	i40e_get_link_status(hw, &pf->link_up);			i40e_get_link_status(hw, &pf->link_up);

	/* Print out message if an unqualified module is found */			/* Print out message if an unqualified module is found */
	if ((status->link_info & I40E_AQ_MEDIA_AVAILABLE) &&			if ((link_info->link_info & I40E_AQ_MEDIA_AVAILABLE) &&
	(pf->advertised_speed) &&			(pf->advertised_speed) &&
	(atomic_load_32(&pf->state) &			(if_getflags(pf->vsi.ifp) & IFF_UP) &&
				stallamr_netapp.comUnsubmitted Not Done Inline Actions This change appears to suppress "unqualified module" message if the link for any reason go down. For instance - admin down vs really an unqualified/unsupported module. If let say, I inserted a SAS cable or FC cable against the port, naturally the link is down but we will loose the ability to advertise "unqualified module" as well. stallamr_netapp.com: This change appears to suppress "unqualified module" message if the link for any reason go down.
				krzysztof.galazka_intel.comAuthorUnsubmitted Done Inline Actions The IFF_UP flag is controlled by ifconfig and it does not depend on the state of a link reported by FW. When interface is brought up by an user and FW reports link down due to unqualified module the message is going to be reported. krzysztof.galazka_intel.com: The IFF_UP flag is controlled by ifconfig and it does not depend on the state of a link…
	IXL_PF_STATE_LINK_ACTIVE_ON_DOWN) != 0 &&			(!(link_info->an_info & I40E_AQ_QUALIFIED_MODULE)) &&
	(!(status->an_info & I40E_AQ_QUALIFIED_MODULE)) &&			(!(link_info->link_info & I40E_AQ_LINK_UP)))
	(!(status->link_info & I40E_AQ_LINK_UP)))
	device_printf(dev, "Link failed because "			device_printf(dev, "Link failed because "
	"an unqualified module was detected!\n");			"an unqualified module was detected!\n");

	/* OS link info is updated elsewhere */			/* OS link info is updated elsewhere */
	}			}

	/*********************************************************************			/*********************************************************************
	*			*
	▲ Show 20 Lines • Show All 677 Lines • Show Last 20 Lines