Changeset View
Changeset View
Standalone View
Standalone View
sys/gnu/dts/arm64/broadcom/bcm2711-rpi-4-b.dts
// SPDX-License-Identifier: GPL-2.0 | /dts-v1/; | ||||
#include "arm/bcm2711-rpi-4-b.dts" | |||||
/memreserve/ 0x0 0x1000; | |||||
/ { | |||||
compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; | |||||
model = "Raspberry Pi 4 Model B"; | |||||
#address-cells = <0x2>; | |||||
#size-cells = <0x1>; | |||||
interrupt-parent = <0x1>; | |||||
aliases { | |||||
serial0 = "/soc/serial@7e215040"; | |||||
serial1 = "/soc/serial@7e201000"; | |||||
emmc2bus = "/emmc2bus"; | |||||
ethernet0 = "/scb/ethernet@7d580000"; | |||||
pcie0 = "/scb/pcie@7d500000"; | |||||
audio = "/soc/mailbox@7e00b840/bcm2835_audio"; | |||||
aux = "/soc/aux@7e215000"; | |||||
sound = "/soc/sound"; | |||||
soc = "/soc"; | |||||
dma = "/soc/dma@7e007000"; | |||||
watchdog = "/soc/watchdog@7e100000"; | |||||
random = "/soc/rng@7e104000"; | |||||
mailbox = "/soc/mailbox@7e00b880"; | |||||
gpio = "/soc/gpio@7e200000"; | |||||
uart0 = "/soc/serial@7e201000"; | |||||
uart1 = "/soc/serial@7e215040"; | |||||
sdhost = "/soc/mmc@7e202000"; | |||||
mmc = "/soc/mmc@7e300000"; | |||||
mmc1 = "/soc/mmcnr@7e300000"; | |||||
mmc0 = "/emmc2bus/emmc2@7e340000"; | |||||
i2s = "/soc/i2s@7e203000"; | |||||
i2c0 = "/soc/i2c0mux/i2c@0"; | |||||
i2c1 = "/soc/i2c@7e804000"; | |||||
i2c10 = "/soc/i2c0mux/i2c@1"; | |||||
spi0 = "/soc/spi@7e204000"; | |||||
spi1 = "/soc/spi@7e215080"; | |||||
spi2 = "/soc/spi@7e2150c0"; | |||||
usb = "/soc/usb@7e980000"; | |||||
leds = "/leds"; | |||||
fb = "/soc/fb"; | |||||
thermal = "/soc/avs-monitor@7d5d2000/thermal"; | |||||
axiperf = "/soc/axiperf"; | |||||
mmc2 = "/soc/mmc@7e202000"; | |||||
i2c3 = "/soc/i2c@7e205600"; | |||||
i2c4 = "/soc/i2c@7e205800"; | |||||
i2c5 = "/soc/i2c@7e205a00"; | |||||
i2c6 = "/soc/i2c@7e205c00"; | |||||
}; | |||||
chosen { | |||||
bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1"; | |||||
}; | |||||
reserved-memory { | |||||
#address-cells = <0x2>; | |||||
#size-cells = <0x1>; | |||||
ranges; | |||||
phandle = <0x3f>; | |||||
linux,cma { | |||||
compatible = "shared-dma-pool"; | |||||
size = <0x4000000>; | |||||
reusable; | |||||
linux,cma-default; | |||||
alloc-ranges = <0x0 0x0 0x30000000>; | |||||
phandle = <0x40>; | |||||
}; | |||||
}; | |||||
thermal-zones { | |||||
cpu-thermal { | |||||
polling-delay-passive = <0x0>; | |||||
polling-delay = <0x3e8>; | |||||
coefficients = <0xfffffe19 0x641b8>; | |||||
thermal-sensors = <0x2>; | |||||
phandle = <0x41>; | |||||
cooling-maps { | |||||
}; | |||||
}; | |||||
}; | |||||
soc { | |||||
compatible = "simple-bus"; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x1>; | |||||
ranges = <0x7e000000 0x0 0xfe000000 0x1800000 0x7c000000 0x0 0xfc000000 0x2000000 0x40000000 0x0 0xff800000 0x800000>; | |||||
dma-ranges = <0xc0000000 0x0 0x0 0x40000000>; | |||||
phandle = <0x42>; | |||||
timer@7e003000 { | |||||
compatible = "brcm,bcm2835-system-timer"; | |||||
reg = <0x7e003000 0x1000>; | |||||
interrupts = <0x0 0x40 0x4 0x0 0x41 0x4 0x0 0x42 0x4 0x0 0x43 0x4>; | |||||
clock-frequency = <0xf4240>; | |||||
phandle = <0x43>; | |||||
}; | |||||
txp@7e004000 { | |||||
compatible = "brcm,bcm2835-txp"; | |||||
reg = <0x7e004000 0x20>; | |||||
interrupts = <0x0 0x4b 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0x44>; | |||||
}; | |||||
cprman@7e101000 { | |||||
compatible = "brcm,bcm2711-cprman"; | |||||
#clock-cells = <0x1>; | |||||
reg = <0x7e101000 0x2000>; | |||||
clocks = <0x3 0x4 0x0 0x4 0x1 0x4 0x2 0x5 0x0 0x5 0x1 0x5 0x2>; | |||||
firmware = <0x6>; | |||||
phandle = <0x7>; | |||||
}; | |||||
rng@7e104000 { | |||||
compatible = "brcm,bcm2711-rng200"; | |||||
reg = <0x7e104000 0x10>; | |||||
interrupts = <0x0 0x7d 0x4>; | |||||
status = "okay"; | |||||
phandle = <0x36>; | |||||
}; | |||||
mailbox@7e00b880 { | |||||
compatible = "brcm,bcm2835-mbox"; | |||||
reg = <0x7e00b880 0x40>; | |||||
interrupts = <0x0 0x21 0x4>; | |||||
#mbox-cells = <0x0>; | |||||
phandle = <0x1c>; | |||||
}; | |||||
gpio@7e200000 { | |||||
compatible = "brcm,bcm2711-gpio"; | |||||
reg = <0x7e200000 0xb4>; | |||||
interrupts = <0x0 0x71 0x4 0x0 0x72 0x4>; | |||||
gpio-controller; | |||||
#gpio-cells = <0x2>; | |||||
interrupt-controller; | |||||
#interrupt-cells = <0x2>; | |||||
pinctrl-names = "default"; | |||||
gpio-line-names = "ID_SDA", "ID_SCL", "SDA1", "SCL1", "GPIO_GCLK", "GPIO5", "GPIO6", "SPI_CE1_N", "SPI_CE0_N", "SPI_MISO", "SPI_MOSI", "SPI_SCLK", "GPIO12", "GPIO13", "TXD1", "RXD1", "GPIO16", "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", "GPIO27", "RGMII_MDIO", "RGMIO_MDC", "CTS0", "RTS0", "TXD0", "RXD0", "SD1_CLK", "SD1_CMD", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", "PWM0_MISO", "PWM1_MOSI", "STATUS_LED_G_CLK", "SPIFLASH_CE_N", "SDA0", "SCL0", "RGMII_RXCLK", "RGMII_RXCTL", "RGMII_RXD0", "RGMII_RXD1", "RGMII_RXD2", "RGMII_RXD3", "RGMII_TXCLK", "RGMII_TXCTL", "RGMII_TXD0", "RGMII_TXD1", "RGMII_TXD2", "RGMII_TXD3"; | |||||
phandle = <0xf>; | |||||
dpi_gpio0 { | |||||
brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1a 0x1b>; | |||||
brcm,function = <0x6>; | |||||
phandle = <0x45>; | |||||
}; | |||||
emmc_gpio22 { | |||||
brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x46>; | |||||
}; | |||||
emmc_gpio34 { | |||||
brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>; | |||||
brcm,function = <0x7>; | |||||
brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>; | |||||
phandle = <0x47>; | |||||
}; | |||||
emmc_gpio48 { | |||||
brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x1e>; | |||||
}; | |||||
gpclk0_gpio4 { | |||||
brcm,pins = <0x4>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x48>; | |||||
}; | |||||
gpclk1_gpio5 { | |||||
brcm,pins = <0x5>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x49>; | |||||
}; | |||||
gpclk1_gpio42 { | |||||
brcm,pins = <0x2a>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x4a>; | |||||
}; | |||||
gpclk1_gpio44 { | |||||
brcm,pins = <0x2c>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x4b>; | |||||
}; | |||||
gpclk2_gpio6 { | |||||
brcm,pins = <0x6>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x4c>; | |||||
}; | |||||
gpclk2_gpio43 { | |||||
brcm,pins = <0x2b>; | |||||
brcm,function = <0x4>; | |||||
brcm,pull = <0x0>; | |||||
phandle = <0x4d>; | |||||
}; | |||||
i2c0_gpio0 { | |||||
brcm,pins = <0x0 0x1>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x11>; | |||||
}; | |||||
i2c0_gpio28 { | |||||
brcm,pins = <0x1c 0x1d>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x4e>; | |||||
}; | |||||
i2c0_gpio44 { | |||||
brcm,pins = <0x2c 0x2d>; | |||||
brcm,function = <0x5>; | |||||
phandle = <0x12>; | |||||
}; | |||||
i2c1_gpio2 { | |||||
brcm,pins = <0x2 0x3>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x4f>; | |||||
}; | |||||
i2c1_gpio44 { | |||||
brcm,pins = <0x2c 0x2d>; | |||||
brcm,function = <0x6>; | |||||
phandle = <0x50>; | |||||
}; | |||||
jtag_gpio22 { | |||||
brcm,pins = <0x16 0x17 0x18 0x19 0x1a 0x1b>; | |||||
brcm,function = <0x3>; | |||||
phandle = <0x51>; | |||||
}; | |||||
pcm_gpio18 { | |||||
brcm,pins = <0x12 0x13 0x14 0x15>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x52>; | |||||
}; | |||||
pcm_gpio28 { | |||||
brcm,pins = <0x1c 0x1d 0x1e 0x1f>; | |||||
brcm,function = <0x6>; | |||||
phandle = <0x53>; | |||||
}; | |||||
sdhost_gpio48 { | |||||
brcm,pins = <0x30 0x31 0x32 0x33 0x34 0x35>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x54>; | |||||
}; | |||||
spi0_gpio7 { | |||||
brcm,pins = <0x7 0x8 0x9 0xa 0xb>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x55>; | |||||
}; | |||||
spi0_gpio35 { | |||||
brcm,pins = <0x23 0x24 0x25 0x26 0x27>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x56>; | |||||
}; | |||||
spi1_gpio16 { | |||||
brcm,pins = <0x10 0x11 0x12 0x13 0x14 0x15>; | |||||
brcm,function = <0x3>; | |||||
phandle = <0x57>; | |||||
}; | |||||
spi2_gpio40 { | |||||
brcm,pins = <0x28 0x29 0x2a 0x2b 0x2c 0x2d>; | |||||
brcm,function = <0x3>; | |||||
phandle = <0x58>; | |||||
}; | |||||
uart0_gpio14 { | |||||
brcm,pins = <0xe 0xf>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x59>; | |||||
}; | |||||
uart0_ctsrts_gpio16 { | |||||
brcm,pins = <0x10 0x11>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x5a>; | |||||
}; | |||||
uart0_ctsrts_gpio30 { | |||||
brcm,pins = <0x1e 0x1f>; | |||||
brcm,function = <0x7>; | |||||
brcm,pull = <0x2 0x0>; | |||||
phandle = <0x5b>; | |||||
}; | |||||
uart0_gpio32 { | |||||
brcm,pins = <0x20 0x21>; | |||||
brcm,function = <0x7>; | |||||
brcm,pull = <0x0 0x2>; | |||||
phandle = <0x5c>; | |||||
}; | |||||
uart0_gpio36 { | |||||
brcm,pins = <0x24 0x25>; | |||||
brcm,function = <0x6>; | |||||
phandle = <0x5d>; | |||||
}; | |||||
uart0_ctsrts_gpio38 { | |||||
brcm,pins = <0x26 0x27>; | |||||
brcm,function = <0x6>; | |||||
phandle = <0x5e>; | |||||
}; | |||||
uart1_gpio14 { | |||||
brcm,pins = <0xe 0xf>; | |||||
brcm,function = <0x2>; | |||||
phandle = <0x5f>; | |||||
}; | |||||
uart1_ctsrts_gpio16 { | |||||
brcm,pins = <0x10 0x11>; | |||||
brcm,function = <0x2>; | |||||
phandle = <0x60>; | |||||
}; | |||||
uart1_gpio32 { | |||||
brcm,pins = <0x20 0x21>; | |||||
brcm,function = <0x2>; | |||||
phandle = <0x61>; | |||||
}; | |||||
uart1_ctsrts_gpio30 { | |||||
brcm,pins = <0x1e 0x1f>; | |||||
brcm,function = <0x2>; | |||||
phandle = <0x62>; | |||||
}; | |||||
uart1_gpio40 { | |||||
brcm,pins = <0x28 0x29>; | |||||
brcm,function = <0x2>; | |||||
phandle = <0x63>; | |||||
}; | |||||
uart1_ctsrts_gpio42 { | |||||
brcm,pins = <0x2a 0x2b>; | |||||
brcm,function = <0x2>; | |||||
phandle = <0x64>; | |||||
}; | |||||
gpclk0_gpio49 { | |||||
phandle = <0x65>; | |||||
pin-gpclk { | |||||
pins = "gpio49"; | |||||
function = "alt1"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
gpclk1_gpio50 { | |||||
phandle = <0x66>; | |||||
pin-gpclk { | |||||
pins = "gpio50"; | |||||
function = "alt1"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
gpclk2_gpio51 { | |||||
phandle = <0x67>; | |||||
pin-gpclk { | |||||
pins = "gpio51"; | |||||
function = "alt1"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c0_gpio46 { | |||||
phandle = <0x68>; | |||||
pin-sda { | |||||
function = "alt0"; | |||||
pins = "gpio46"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt0"; | |||||
pins = "gpio47"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c1_gpio46 { | |||||
phandle = <0x69>; | |||||
pin-sda { | |||||
function = "alt1"; | |||||
pins = "gpio46"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt1"; | |||||
pins = "gpio47"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c3_gpio2 { | |||||
phandle = <0x6a>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio2"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio3"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c3_gpio4 { | |||||
phandle = <0x6b>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio4"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio5"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c4_gpio6 { | |||||
phandle = <0x6c>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio6"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio7"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c4_gpio8 { | |||||
phandle = <0x6d>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio8"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio9"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c5_gpio10 { | |||||
phandle = <0x6e>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio10"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio11"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c5_gpio12 { | |||||
phandle = <0x6f>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio12"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio13"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c6_gpio0 { | |||||
phandle = <0x70>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio0"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio1"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c6_gpio22 { | |||||
phandle = <0x71>; | |||||
pin-sda { | |||||
function = "alt5"; | |||||
pins = "gpio22"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-scl { | |||||
function = "alt5"; | |||||
pins = "gpio23"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
i2c_slave_gpio8 { | |||||
phandle = <0x72>; | |||||
pins-i2c-slave { | |||||
pins = "gpio8", "gpio9", "gpio10", "gpio11"; | |||||
function = "alt3"; | |||||
}; | |||||
}; | |||||
jtag_gpio48 { | |||||
phandle = <0x73>; | |||||
pins-jtag { | |||||
pins = "gpio48", "gpio49", "gpio50", "gpio51", "gpio52", "gpio53"; | |||||
function = "alt4"; | |||||
}; | |||||
}; | |||||
mii_gpio28 { | |||||
phandle = <0x74>; | |||||
pins-mii { | |||||
pins = "gpio28", "gpio29", "gpio30", "gpio31"; | |||||
function = "alt4"; | |||||
}; | |||||
}; | |||||
mii_gpio36 { | |||||
phandle = <0x75>; | |||||
pins-mii { | |||||
pins = "gpio36", "gpio37", "gpio38", "gpio39"; | |||||
function = "alt5"; | |||||
}; | |||||
}; | |||||
pcm_gpio50 { | |||||
phandle = <0x76>; | |||||
pins-pcm { | |||||
pins = "gpio50", "gpio51", "gpio52", "gpio53"; | |||||
function = "alt2"; | |||||
}; | |||||
}; | |||||
pwm0_0_gpio12 { | |||||
phandle = <0x77>; | |||||
pin-pwm { | |||||
pins = "gpio12"; | |||||
function = "alt0"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm0_0_gpio18 { | |||||
phandle = <0x78>; | |||||
pin-pwm { | |||||
pins = "gpio18"; | |||||
function = "alt5"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm1_0_gpio40 { | |||||
phandle = <0x1a>; | |||||
pin-pwm { | |||||
pins = "gpio40"; | |||||
function = "alt0"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm0_1_gpio13 { | |||||
phandle = <0x79>; | |||||
pin-pwm { | |||||
pins = "gpio13"; | |||||
function = "alt0"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm0_1_gpio19 { | |||||
phandle = <0x7a>; | |||||
pin-pwm { | |||||
pins = "gpio19"; | |||||
function = "alt5"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm1_1_gpio41 { | |||||
phandle = <0x1b>; | |||||
pin-pwm { | |||||
pins = "gpio41"; | |||||
function = "alt0"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm0_1_gpio45 { | |||||
phandle = <0x7b>; | |||||
pin-pwm { | |||||
pins = "gpio45"; | |||||
function = "alt0"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm0_0_gpio52 { | |||||
phandle = <0x7c>; | |||||
pin-pwm { | |||||
pins = "gpio52"; | |||||
function = "alt1"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
pwm0_1_gpio53 { | |||||
phandle = <0x7d>; | |||||
pin-pwm { | |||||
pins = "gpio53"; | |||||
function = "alt1"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
rgmii_gpio35 { | |||||
phandle = <0x7e>; | |||||
pin-start-stop { | |||||
pins = "gpio35"; | |||||
function = "alt4"; | |||||
}; | |||||
pin-rx-ok { | |||||
pins = "gpio36"; | |||||
function = "alt4"; | |||||
}; | |||||
}; | |||||
rgmii_irq_gpio34 { | |||||
phandle = <0x7f>; | |||||
pin-irq { | |||||
pins = "gpio34"; | |||||
function = "alt5"; | |||||
}; | |||||
}; | |||||
rgmii_irq_gpio39 { | |||||
phandle = <0x80>; | |||||
pin-irq { | |||||
pins = "gpio39"; | |||||
function = "alt4"; | |||||
}; | |||||
}; | |||||
rgmii_mdio_gpio28 { | |||||
phandle = <0x81>; | |||||
pins-mdio { | |||||
pins = "gpio28", "gpio29"; | |||||
function = "alt5"; | |||||
}; | |||||
}; | |||||
rgmii_mdio_gpio37 { | |||||
phandle = <0x82>; | |||||
pins-mdio { | |||||
pins = "gpio37", "gpio38"; | |||||
function = "alt4"; | |||||
}; | |||||
}; | |||||
spi0_gpio46 { | |||||
phandle = <0x83>; | |||||
pins-spi { | |||||
pins = "gpio46", "gpio47", "gpio48", "gpio49"; | |||||
function = "alt2"; | |||||
}; | |||||
}; | |||||
spi2_gpio46 { | |||||
phandle = <0x84>; | |||||
pins-spi { | |||||
pins = "gpio46", "gpio47", "gpio48", "gpio49", "gpio50"; | |||||
function = "alt5"; | |||||
}; | |||||
}; | |||||
spi3_gpio0 { | |||||
phandle = <0x85>; | |||||
pins-spi { | |||||
pins = "gpio0", "gpio1", "gpio2", "gpio3"; | |||||
function = "alt3"; | |||||
}; | |||||
}; | |||||
spi4_gpio4 { | |||||
phandle = <0x86>; | |||||
pins-spi { | |||||
pins = "gpio4", "gpio5", "gpio6", "gpio7"; | |||||
function = "alt3"; | |||||
}; | |||||
}; | |||||
spi5_gpio12 { | |||||
phandle = <0x87>; | |||||
pins-spi { | |||||
pins = "gpio12", "gpio13", "gpio14", "gpio15"; | |||||
function = "alt3"; | |||||
}; | |||||
}; | |||||
spi6_gpio18 { | |||||
phandle = <0x88>; | |||||
pins-spi { | |||||
pins = "gpio18", "gpio19", "gpio20", "gpio21"; | |||||
function = "alt3"; | |||||
}; | |||||
}; | |||||
uart2_gpio0 { | |||||
phandle = <0x89>; | |||||
pin-tx { | |||||
pins = "gpio0"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
pin-rx { | |||||
pins = "gpio1"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
}; | |||||
uart2_ctsrts_gpio2 { | |||||
phandle = <0x8a>; | |||||
pin-cts { | |||||
pins = "gpio2"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-rts { | |||||
pins = "gpio3"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
uart3_gpio4 { | |||||
phandle = <0x8b>; | |||||
pin-tx { | |||||
pins = "gpio4"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
pin-rx { | |||||
pins = "gpio5"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
}; | |||||
uart3_ctsrts_gpio6 { | |||||
phandle = <0x8c>; | |||||
pin-cts { | |||||
pins = "gpio6"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-rts { | |||||
pins = "gpio7"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
uart4_gpio8 { | |||||
phandle = <0x8d>; | |||||
pin-tx { | |||||
pins = "gpio8"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
pin-rx { | |||||
pins = "gpio9"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
}; | |||||
uart4_ctsrts_gpio10 { | |||||
phandle = <0x8e>; | |||||
pin-cts { | |||||
pins = "gpio10"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-rts { | |||||
pins = "gpio11"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
uart5_gpio12 { | |||||
phandle = <0x8f>; | |||||
pin-tx { | |||||
pins = "gpio12"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
pin-rx { | |||||
pins = "gpio13"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
}; | |||||
uart5_ctsrts_gpio14 { | |||||
phandle = <0x90>; | |||||
pin-cts { | |||||
pins = "gpio14"; | |||||
function = "alt4"; | |||||
bias-pull-up; | |||||
}; | |||||
pin-rts { | |||||
pins = "gpio15"; | |||||
function = "alt4"; | |||||
bias-disable; | |||||
}; | |||||
}; | |||||
gpioout { | |||||
brcm,pins = <0x6>; | |||||
brcm,function = <0x1>; | |||||
phandle = <0x91>; | |||||
}; | |||||
alt0 { | |||||
brcm,pins = <0x4 0x5 0x7 0x8 0x9 0xa 0xb>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x92>; | |||||
}; | |||||
dpi_18bit_gpio0 { | |||||
brcm,pins = <0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf 0x10 0x11 0x12 0x13 0x14 0x15>; | |||||
brcm,function = <0x6>; | |||||
phandle = <0x93>; | |||||
}; | |||||
spi0_pins { | |||||
brcm,pins = <0x9 0xa 0xb>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0xd>; | |||||
}; | |||||
spi0_cs_pins { | |||||
brcm,pins = <0x8 0x7>; | |||||
brcm,function = <0x1>; | |||||
phandle = <0xe>; | |||||
}; | |||||
spi3_pins { | |||||
brcm,pins = <0x1 0x2 0x3>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x94>; | |||||
}; | |||||
spi3_cs_pins { | |||||
brcm,pins = <0x0 0x18>; | |||||
brcm,function = <0x1>; | |||||
phandle = <0x95>; | |||||
}; | |||||
spi4_pins { | |||||
brcm,pins = <0x5 0x6 0x7>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x96>; | |||||
}; | |||||
spi4_cs_pins { | |||||
brcm,pins = <0x4 0x19>; | |||||
brcm,function = <0x1>; | |||||
phandle = <0x97>; | |||||
}; | |||||
spi5_pins { | |||||
brcm,pins = <0xd 0xe 0xf>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x98>; | |||||
}; | |||||
spi5_cs_pins { | |||||
brcm,pins = <0xc 0x1a>; | |||||
brcm,function = <0x1>; | |||||
phandle = <0x99>; | |||||
}; | |||||
spi6_pins { | |||||
brcm,pins = <0x13 0x14 0x15>; | |||||
brcm,function = <0x7>; | |||||
phandle = <0x9a>; | |||||
}; | |||||
spi6_cs_pins { | |||||
brcm,pins = <0x12 0x1b>; | |||||
brcm,function = <0x1>; | |||||
phandle = <0x9b>; | |||||
}; | |||||
i2c0 { | |||||
brcm,pins = <0x0 0x1>; | |||||
brcm,function = <0x4>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0x9c>; | |||||
}; | |||||
i2c1 { | |||||
brcm,pins = <0x2 0x3>; | |||||
brcm,function = <0x4>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0x17>; | |||||
}; | |||||
i2c3 { | |||||
brcm,pins = <0x4 0x5>; | |||||
brcm,function = <0x2>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0x9d>; | |||||
}; | |||||
i2c4 { | |||||
brcm,pins = <0x8 0x9>; | |||||
brcm,function = <0x2>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0x9e>; | |||||
}; | |||||
i2c5 { | |||||
brcm,pins = <0xc 0xd>; | |||||
brcm,function = <0x2>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0x9f>; | |||||
}; | |||||
i2c6 { | |||||
brcm,pins = <0x16 0x17>; | |||||
brcm,function = <0x2>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0xa0>; | |||||
}; | |||||
i2s { | |||||
brcm,pins = <0x12 0x13 0x14 0x15>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0xc>; | |||||
}; | |||||
sdio_pins { | |||||
brcm,pins = <0x22 0x23 0x24 0x25 0x26 0x27>; | |||||
brcm,function = <0x7>; | |||||
brcm,pull = <0x0 0x2 0x2 0x2 0x2 0x2>; | |||||
phandle = <0x1f>; | |||||
}; | |||||
bt_pins { | |||||
brcm,pins = "-"; | |||||
brcm,function = <0x0>; | |||||
brcm,pull = <0x2>; | |||||
phandle = <0x9>; | |||||
}; | |||||
uart0_pins { | |||||
brcm,pins = <0x20 0x21>; | |||||
brcm,function = <0x7>; | |||||
brcm,pull = <0x0 0x2>; | |||||
phandle = <0x8>; | |||||
}; | |||||
uart1_pins { | |||||
brcm,pins; | |||||
brcm,function; | |||||
brcm,pull; | |||||
phandle = <0x15>; | |||||
}; | |||||
uart2_pins { | |||||
brcm,pins = <0x0 0x1>; | |||||
brcm,function = <0x3>; | |||||
brcm,pull = <0x0 0x2>; | |||||
phandle = <0xa1>; | |||||
}; | |||||
uart3_pins { | |||||
brcm,pins = <0x4 0x5>; | |||||
brcm,function = <0x3>; | |||||
brcm,pull = <0x0 0x2>; | |||||
phandle = <0xa2>; | |||||
}; | |||||
uart4_pins { | |||||
brcm,pins = <0x8 0x9>; | |||||
brcm,function = <0x3>; | |||||
brcm,pull = <0x0 0x2>; | |||||
phandle = <0xa3>; | |||||
}; | |||||
uart5_pins { | |||||
brcm,pins = <0xc 0xd>; | |||||
brcm,function = <0x3>; | |||||
brcm,pull = <0x0 0x2>; | |||||
phandle = <0xa4>; | |||||
}; | |||||
audio_pins { | |||||
brcm,pins = <0x28 0x29>; | |||||
brcm,function = <0x4>; | |||||
phandle = <0x1d>; | |||||
}; | |||||
}; | |||||
serial@7e201000 { | |||||
compatible = "arm,pl011", "arm,primecell"; | |||||
reg = <0x7e201000 0x200>; | |||||
interrupts = <0x0 0x79 0x4>; | |||||
clocks = <0x7 0x13 0x7 0x14>; | |||||
clock-names = "uartclk", "apb_pclk"; | |||||
arm,primecell-periphid = <0x241011>; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x8 0x9>; | |||||
uart-has-rtscts; | |||||
status = "okay"; | |||||
cts-event-workaround; | |||||
skip-init; | |||||
phandle = <0x2e>; | |||||
bluetooth { | |||||
compatible = "brcm,bcm43438-bt"; | |||||
max-speed = <0x2dc6c0>; | |||||
shutdown-gpios = <0xa 0x0 0x0>; | |||||
status = "disabled"; | |||||
phandle = <0x2d>; | |||||
}; | |||||
}; | |||||
mmc@7e202000 { | |||||
compatible = "brcm,bcm2835-sdhost"; | |||||
reg = <0x7e202000 0x100>; | |||||
interrupts = <0x0 0x78 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
status = "disabled"; | |||||
dmas = <0xb 0x2000000d>; | |||||
dma-names = "rx-tx"; | |||||
bus-width = <0x4>; | |||||
brcm,overclock-50 = <0x0>; | |||||
brcm,pio-limit = <0x1>; | |||||
phandle = <0x37>; | |||||
}; | |||||
i2s@7e203000 { | |||||
compatible = "brcm,bcm2835-i2s"; | |||||
reg = <0x7e203000 0x24>; | |||||
clocks = <0x7 0x1f>; | |||||
status = "disabled"; | |||||
#sound-dai-cells = <0x0>; | |||||
dmas = <0xb 0x2 0xb 0x3>; | |||||
dma-names = "tx", "rx"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0xc>; | |||||
phandle = <0x30>; | |||||
}; | |||||
spi@7e204000 { | |||||
compatible = "brcm,bcm2835-spi"; | |||||
reg = <0x7e204000 0x200>; | |||||
interrupts = <0x0 0x76 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
dmas = <0xb 0x6 0xb 0x7>; | |||||
dma-names = "tx", "rx"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0xd 0xe>; | |||||
cs-gpios = <0xf 0x8 0x1 0xf 0x7 0x1>; | |||||
phandle = <0x31>; | |||||
spidev@0 { | |||||
compatible = "spidev"; | |||||
reg = <0x0>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
spi-max-frequency = <0x7735940>; | |||||
phandle = <0xa5>; | |||||
}; | |||||
spidev@1 { | |||||
compatible = "spidev"; | |||||
reg = <0x1>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
spi-max-frequency = <0x7735940>; | |||||
phandle = <0xa6>; | |||||
}; | |||||
}; | |||||
i2c@7e205000 { | |||||
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; | |||||
reg = <0x7e205000 0x200>; | |||||
interrupts = <0x0 0x75 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
clock-frequency = <0x186a0>; | |||||
phandle = <0x10>; | |||||
}; | |||||
i2c0mux { | |||||
compatible = "i2c-mux-pinctrl"; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
i2c-parent = <0x10>; | |||||
pinctrl-names = "i2c0", "i2c_csi_dsi"; | |||||
status = "disabled"; | |||||
pinctrl-0 = <0x11>; | |||||
pinctrl-1 = <0x12>; | |||||
phandle = <0x32>; | |||||
i2c@0 { | |||||
reg = <0x0>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
phandle = <0xa7>; | |||||
}; | |||||
i2c@1 { | |||||
reg = <0x1>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
phandle = <0xa8>; | |||||
}; | |||||
}; | |||||
dpi@7e208000 { | |||||
compatible = "brcm,bcm2835-dpi"; | |||||
reg = <0x7e208000 0x8c>; | |||||
clocks = <0x7 0x14 0x7 0x2c>; | |||||
clock-names = "core", "pixel"; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xa9>; | |||||
}; | |||||
dsi@7e209000 { | |||||
compatible = "brcm,bcm2835-dsi0"; | |||||
reg = <0x7e209000 0x78>; | |||||
interrupts = <0x0 0x64 0x4>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
#clock-cells = <0x1>; | |||||
clocks = <0x7 0x20 0x7 0x2f 0x7 0x31>; | |||||
clock-names = "phy", "escape", "pixel"; | |||||
clock-output-names = "dsi0_byte", "dsi0_ddr2", "dsi0_ddr"; | |||||
status = "disabled"; | |||||
power-domains = <0x13 0x11>; | |||||
phandle = <0x4>; | |||||
}; | |||||
aux@7e215000 { | |||||
compatible = "brcm,bcm2835-aux"; | |||||
#clock-cells = <0x1>; | |||||
reg = <0x7e215000 0x8>; | |||||
clocks = <0x7 0x14>; | |||||
phandle = <0x14>; | |||||
}; | |||||
serial@7e215040 { | |||||
compatible = "brcm,bcm2835-aux-uart"; | |||||
reg = <0x7e215040 0x40>; | |||||
interrupts = <0x0 0x5d 0x4>; | |||||
clocks = <0x14 0x0>; | |||||
status = "okay"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x15>; | |||||
skip-init; | |||||
phandle = <0x2f>; | |||||
bluetooth { | |||||
compatible = "brcm,bcm43438-bt"; | |||||
max-speed = <0x70800>; | |||||
shutdown-gpios = <0xa 0x0 0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xaa>; | |||||
}; | |||||
}; | |||||
spi@7e215080 { | |||||
compatible = "brcm,bcm2835-aux-spi"; | |||||
reg = <0x7e215080 0x40>; | |||||
interrupts = <0x0 0x5d 0x4>; | |||||
clocks = <0x14 0x1>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xab>; | |||||
}; | |||||
spi@7e2150c0 { | |||||
compatible = "brcm,bcm2835-aux-spi"; | |||||
reg = <0x7e2150c0 0x40>; | |||||
interrupts = <0x0 0x5d 0x4>; | |||||
clocks = <0x14 0x2>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xac>; | |||||
}; | |||||
pwm@7e20c000 { | |||||
compatible = "brcm,bcm2835-pwm"; | |||||
reg = <0x7e20c000 0x28>; | |||||
clocks = <0x7 0x1e>; | |||||
assigned-clocks = <0x7 0x1e>; | |||||
assigned-clock-rates = <0x989680>; | |||||
#pwm-cells = <0x2>; | |||||
status = "disabled"; | |||||
phandle = <0xad>; | |||||
}; | |||||
hvs@7e400000 { | |||||
compatible = "brcm,bcm2835-hvs"; | |||||
reg = <0x7e400000 0x6000>; | |||||
interrupts = <0x0 0x61 0x4>; | |||||
status = "disabled"; | |||||
clocks = <0x16 0x4>; | |||||
phandle = <0xae>; | |||||
}; | |||||
dsi@7e700000 { | |||||
compatible = "brcm,bcm2835-dsi1"; | |||||
reg = <0x7e700000 0x8c>; | |||||
interrupts = <0x0 0x6c 0x4>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
#clock-cells = <0x1>; | |||||
clocks = <0x7 0x23 0x7 0x30 0x7 0x32>; | |||||
clock-names = "phy", "escape", "pixel"; | |||||
clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; | |||||
status = "disabled"; | |||||
power-domains = <0x13 0x12>; | |||||
phandle = <0x5>; | |||||
}; | |||||
i2c@7e804000 { | |||||
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; | |||||
reg = <0x7e804000 0x1000>; | |||||
interrupts = <0x0 0x75 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x17>; | |||||
clock-frequency = <0x186a0>; | |||||
phandle = <0x33>; | |||||
}; | |||||
vec@7e806000 { | |||||
compatible = "brcm,bcm2835-vec"; | |||||
reg = <0x7e806000 0x1000>; | |||||
clocks = <0x7 0x18>; | |||||
interrupts = <0x0 0x7b 0x4>; | |||||
status = "disabled"; | |||||
power-domains = <0x13 0x7>; | |||||
phandle = <0xaf>; | |||||
}; | |||||
usb@7e980000 { | |||||
compatible = "brcm,bcm2708-usb"; | |||||
reg = <0x7e980000 0x10000 0x7e00b200 0x200>; | |||||
interrupts = <0x0 0x49 0x4 0x0 0x28 0x4>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
clocks = <0x18>; | |||||
clock-names = "otg"; | |||||
phys = <0x19>; | |||||
phy-names = "usb2-phy"; | |||||
power-domains = <0x13 0x6>; | |||||
interrupt-names = "usb", "soft"; | |||||
status = "disabled"; | |||||
phandle = <0xb0>; | |||||
}; | |||||
local_intc@40000000 { | |||||
compatible = "brcm,bcm2836-l1-intc"; | |||||
reg = <0x40000000 0x100>; | |||||
phandle = <0xb1>; | |||||
}; | |||||
interrupt-controller@40041000 { | |||||
interrupt-controller; | |||||
#interrupt-cells = <0x3>; | |||||
compatible = "arm,gic-400"; | |||||
reg = <0x40041000 0x1000 0x40042000 0x2000 0x40044000 0x2000 0x40046000 0x2000>; | |||||
interrupts = <0x1 0x9 0xf04>; | |||||
phandle = <0x1>; | |||||
}; | |||||
avs-monitor@7d5d2000 { | |||||
compatible = "brcm,bcm2711-avs-monitor", "syscon", "simple-mfd"; | |||||
reg = <0x7d5d2000 0xf00>; | |||||
phandle = <0xb2>; | |||||
thermal { | |||||
compatible = "brcm,bcm2711-thermal"; | |||||
#thermal-sensor-cells = <0x0>; | |||||
phandle = <0x2>; | |||||
}; | |||||
}; | |||||
dma@7e007000 { | |||||
compatible = "brcm,bcm2835-dma"; | |||||
reg = <0x7e007000 0xb00>; | |||||
interrupts = <0x0 0x50 0x4 0x0 0x51 0x4 0x0 0x52 0x4 0x0 0x53 0x4 0x0 0x54 0x4 0x0 0x55 0x4 0x0 0x56 0x4 0x0 0x57 0x4 0x0 0x57 0x4 0x0 0x58 0x4 0x0 0x58 0x4>; | |||||
interrupt-names = "dma0", "dma1", "dma2", "dma3", "dma4", "dma5", "dma6", "dma7", "dma8", "dma9", "dma10"; | |||||
#dma-cells = <0x1>; | |||||
brcm,dma-channel-mask = <0x1f5>; | |||||
phandle = <0xb>; | |||||
}; | |||||
watchdog@7e100000 { | |||||
compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; | |||||
#power-domain-cells = <0x1>; | |||||
#reset-cells = <0x1>; | |||||
reg = <0x7e100000 0x114 0x7e00a000 0x24 0x7ec11000 0x20>; | |||||
clocks = <0x7 0x15 0x7 0x1d 0x7 0x17 0x7 0x16>; | |||||
clock-names = "v3d", "peri_image", "h264", "isp"; | |||||
system-power-controller; | |||||
phandle = <0x35>; | |||||
}; | |||||
serial@7e201400 { | |||||
compatible = "arm,pl011", "arm,primecell"; | |||||
reg = <0x7e201400 0x200>; | |||||
interrupts = <0x0 0x79 0x4>; | |||||
clocks = <0x7 0x13 0x7 0x14>; | |||||
clock-names = "uartclk", "apb_pclk"; | |||||
arm,primecell-periphid = <0x241011>; | |||||
status = "disabled"; | |||||
phandle = <0xb3>; | |||||
}; | |||||
serial@7e201600 { | |||||
compatible = "arm,pl011", "arm,primecell"; | |||||
reg = <0x7e201600 0x200>; | |||||
interrupts = <0x0 0x79 0x4>; | |||||
clocks = <0x7 0x13 0x7 0x14>; | |||||
clock-names = "uartclk", "apb_pclk"; | |||||
arm,primecell-periphid = <0x241011>; | |||||
status = "disabled"; | |||||
phandle = <0xb4>; | |||||
}; | |||||
serial@7e201800 { | |||||
compatible = "arm,pl011", "arm,primecell"; | |||||
reg = <0x7e201800 0x200>; | |||||
interrupts = <0x0 0x79 0x4>; | |||||
clocks = <0x7 0x13 0x7 0x14>; | |||||
clock-names = "uartclk", "apb_pclk"; | |||||
arm,primecell-periphid = <0x241011>; | |||||
status = "disabled"; | |||||
phandle = <0xb5>; | |||||
}; | |||||
serial@7e201a00 { | |||||
compatible = "arm,pl011", "arm,primecell"; | |||||
reg = <0x7e201a00 0x200>; | |||||
interrupts = <0x0 0x79 0x4>; | |||||
clocks = <0x7 0x13 0x7 0x14>; | |||||
clock-names = "uartclk", "apb_pclk"; | |||||
arm,primecell-periphid = <0x241011>; | |||||
status = "disabled"; | |||||
phandle = <0xb6>; | |||||
}; | |||||
spi@7e204600 { | |||||
compatible = "brcm,bcm2835-spi"; | |||||
reg = <0x7e204600 0x200>; | |||||
interrupts = <0x0 0x76 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xb7>; | |||||
}; | |||||
spi@7e204800 { | |||||
compatible = "brcm,bcm2835-spi"; | |||||
reg = <0x7e204800 0x200>; | |||||
interrupts = <0x0 0x76 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xb8>; | |||||
}; | |||||
spi@7e204a00 { | |||||
compatible = "brcm,bcm2835-spi"; | |||||
reg = <0x7e204a00 0x200>; | |||||
interrupts = <0x0 0x76 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xb9>; | |||||
}; | |||||
spi@7e204c00 { | |||||
compatible = "brcm,bcm2835-spi"; | |||||
reg = <0x7e204c00 0x200>; | |||||
interrupts = <0x0 0x76 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xba>; | |||||
}; | |||||
i2c@7e205600 { | |||||
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; | |||||
reg = <0x7e205600 0x200>; | |||||
interrupts = <0x0 0x75 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xbb>; | |||||
}; | |||||
i2c@7e205800 { | |||||
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; | |||||
reg = <0x7e205800 0x200>; | |||||
interrupts = <0x0 0x75 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xbc>; | |||||
}; | |||||
i2c@7e205a00 { | |||||
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; | |||||
reg = <0x7e205a00 0x200>; | |||||
interrupts = <0x0 0x75 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xbd>; | |||||
}; | |||||
i2c@7e205c00 { | |||||
compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c"; | |||||
reg = <0x7e205c00 0x200>; | |||||
interrupts = <0x0 0x75 0x4>; | |||||
clocks = <0x7 0x14>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
status = "disabled"; | |||||
phandle = <0xbe>; | |||||
}; | |||||
pwm@7e20c800 { | |||||
compatible = "brcm,bcm2835-pwm"; | |||||
reg = <0x7e20c800 0x28>; | |||||
clocks = <0x7 0x1e>; | |||||
assigned-clocks = <0x7 0x1e>; | |||||
assigned-clock-rates = <0x989680>; | |||||
#pwm-cells = <0x2>; | |||||
status = "disabled"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x1a 0x1b>; | |||||
phandle = <0xbf>; | |||||
}; | |||||
firmware { | |||||
compatible = "raspberrypi,bcm2835-firmware", "simple-bus"; | |||||
mboxes = <0x1c>; | |||||
dma-ranges; | |||||
phandle = <0x6>; | |||||
clocks { | |||||
compatible = "raspberrypi,firmware-clocks"; | |||||
#clock-cells = <0x1>; | |||||
phandle = <0x16>; | |||||
}; | |||||
gpio { | |||||
compatible = "raspberrypi,firmware-gpio"; | |||||
gpio-controller; | |||||
#gpio-cells = <0x2>; | |||||
gpio-line-names = "BT_ON", "WL_ON", "PWR_LED_OFF", "GLOBAL_RESET", "VDD_SD_IO_SEL", "CAM_GPIO", "SD_PWR_ON", "SD_OC_N"; | |||||
status = "okay"; | |||||
phandle = <0xa>; | |||||
}; | |||||
reset { | |||||
compatible = "raspberrypi,firmware-reset"; | |||||
#reset-cells = <0x1>; | |||||
phandle = <0x2b>; | |||||
}; | |||||
}; | |||||
power { | |||||
compatible = "raspberrypi,bcm2835-power"; | |||||
firmware = <0x6>; | |||||
#power-domain-cells = <0x1>; | |||||
phandle = <0x13>; | |||||
}; | |||||
mailbox@7e00b840 { | |||||
compatible = "brcm,bcm2711-vchiq"; | |||||
reg = <0x7e00b840 0x3c>; | |||||
interrupts = <0x0 0x22 0x4>; | |||||
phandle = <0xc0>; | |||||
bcm2835_audio { | |||||
compatible = "brcm,bcm2835-audio"; | |||||
brcm,pwm-channels = <0x8>; | |||||
status = "disabled"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x1d>; | |||||
phandle = <0x34>; | |||||
}; | |||||
}; | |||||
pixelvalve@7e206000 { | |||||
status = "disabled"; | |||||
compatible = "brcm,bcm2711-pixelvalve0"; | |||||
reg = <0x7e206000 0x100>; | |||||
interrupts = <0x0 0x6d 0x4>; | |||||
phandle = <0xc1>; | |||||
}; | |||||
pixelvalve@7e207000 { | |||||
status = "disabled"; | |||||
compatible = "brcm,bcm2711-pixelvalve1"; | |||||
reg = <0x7e207000 0x100>; | |||||
interrupts = <0x0 0x6e 0x4>; | |||||
phandle = <0xc2>; | |||||
}; | |||||
mmc@7e300000 { | |||||
compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; | |||||
reg = <0x7e300000 0x100>; | |||||
interrupts = <0x0 0x7e 0x4>; | |||||
clocks = <0x7 0x1c>; | |||||
dmas = <0xb 0xb>; | |||||
dma-names = "rx-tx"; | |||||
brcm,overclock-50 = <0x0>; | |||||
status = "disabled"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x1e>; | |||||
bus-width = <0x4>; | |||||
phandle = <0x38>; | |||||
}; | |||||
mmcnr@7e300000 { | |||||
compatible = "brcm,bcm2835-mmc", "brcm,bcm2835-sdhci"; | |||||
reg = <0x7e300000 0x100>; | |||||
interrupts = <0x0 0x7e 0x4>; | |||||
clocks = <0x7 0x1c>; | |||||
dmas = <0xb 0xb>; | |||||
dma-names = "rx-tx"; | |||||
brcm,overclock-50 = <0x0>; | |||||
non-removable; | |||||
status = "okay"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <0x1f>; | |||||
bus-width = <0x4>; | |||||
phandle = <0x39>; | |||||
}; | |||||
firmwarekms@7e600000 { | |||||
compatible = "raspberrypi,rpi-firmware-kms-2711"; | |||||
reg = <0x7e600000 0x100>; | |||||
interrupts = <0x0 0x70 0x4>; | |||||
brcm,firmware = <0x6>; | |||||
status = "disabled"; | |||||
phandle = <0xc3>; | |||||
}; | |||||
smi@7e600000 { | |||||
compatible = "brcm,bcm2835-smi"; | |||||
reg = <0x7e600000 0x100>; | |||||
interrupts = <0x0 0x70 0x4>; | |||||
clocks = <0x7 0x2a>; | |||||
assigned-clocks = <0x7 0x2a>; | |||||
assigned-clock-rates = <0x7735940>; | |||||
dmas = <0xb 0x4>; | |||||
dma-names = "rx-tx"; | |||||
status = "disabled"; | |||||
phandle = <0xc4>; | |||||
}; | |||||
csi@7e800000 { | |||||
compatible = "brcm,bcm2835-unicam"; | |||||
reg = <0x7e800000 0x800 0x7e802000 0x4>; | |||||
interrupts = <0x0 0x66 0x4>; | |||||
clocks = <0x7 0x2d 0x16 0x4>; | |||||
clock-names = "lp", "vpu"; | |||||
power-domains = <0x13 0xc>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
#clock-cells = <0x1>; | |||||
status = "disabled"; | |||||
phandle = <0xc5>; | |||||
}; | |||||
csi@7e801000 { | |||||
compatible = "brcm,bcm2835-unicam"; | |||||
reg = <0x7e801000 0x800 0x7e802004 0x4>; | |||||
interrupts = <0x0 0x67 0x4>; | |||||
clocks = <0x7 0x2e 0x16 0x4>; | |||||
clock-names = "lp", "vpu"; | |||||
power-domains = <0x13 0xd>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
#clock-cells = <0x1>; | |||||
status = "disabled"; | |||||
brcm,num-data-lanes = <0x2>; | |||||
phandle = <0xc6>; | |||||
}; | |||||
axiperf { | |||||
compatible = "brcm,bcm2835-axiperf"; | |||||
reg = <0x7e009800 0x100 0x7ee08000 0x100>; | |||||
firmware = <0x6>; | |||||
status = "disabled"; | |||||
phandle = <0x3a>; | |||||
}; | |||||
gpiomem { | |||||
compatible = "brcm,bcm2835-gpiomem"; | |||||
reg = <0x7e200000 0x1000>; | |||||
}; | |||||
fb { | |||||
compatible = "brcm,bcm2708-fb"; | |||||
firmware = <0x6>; | |||||
status = "okay"; | |||||
phandle = <0xc7>; | |||||
}; | |||||
vcsm { | |||||
compatible = "raspberrypi,bcm2835-vcsm"; | |||||
firmware = <0x6>; | |||||
status = "okay"; | |||||
phandle = <0xc8>; | |||||
}; | |||||
sound { | |||||
status = "disabled"; | |||||
phandle = <0xc9>; | |||||
}; | |||||
pixelvalve@7e20a000 { | |||||
compatible = "brcm,bcm2711-pixelvalve2"; | |||||
reg = <0x7e20a000 0x100>; | |||||
interrupts = <0x0 0x65 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0xca>; | |||||
}; | |||||
pixelvalve@7e216000 { | |||||
compatible = "brcm,bcm2711-pixelvalve4"; | |||||
reg = <0x7e216000 0x100>; | |||||
interrupts = <0x0 0x6e 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0xcb>; | |||||
}; | |||||
pixelvalve@7ec12000 { | |||||
compatible = "brcm,bcm2711-pixelvalve3"; | |||||
reg = <0x7ec12000 0x100>; | |||||
interrupts = <0x0 0x6a 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0xcc>; | |||||
}; | |||||
clock@7ef00000 { | |||||
compatible = "brcm,brcm2711-dvp"; | |||||
reg = <0x7ef00000 0x10>; | |||||
clocks = <0x20>; | |||||
#clock-cells = <0x1>; | |||||
#reset-cells = <0x1>; | |||||
status = "disabled"; | |||||
phandle = <0x21>; | |||||
}; | |||||
hdmi@7ef00700 { | |||||
compatible = "brcm,bcm2711-hdmi0"; | |||||
reg = <0x7ef00700 0x300 0x7ef00300 0x200 0x7ef00f00 0x80 0x7ef00f80 0x80 0x7ef01b00 0x200 0x7ef01f00 0x400 0x7ef00200 0x80 0x7ef04300 0x100 0x7ef20000 0x100 0x7ef00100 0x30>; | |||||
reg-names = "hdmi", "dvp", "phy", "rm", "packet", "metadata", "csc", "cec", "hd", "intr2"; | |||||
clocks = <0x16 0xd>; | |||||
clock-names = "hdmi"; | |||||
resets = <0x21 0x0>; | |||||
ddc = <0x22>; | |||||
dmas = <0xb 0x800000a>; | |||||
dma-names = "audio-rx"; | |||||
interrupts = <0x0 0x60 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0xcd>; | |||||
}; | |||||
i2c@7ef04500 { | |||||
compatible = "brcm,bcm2711-hdmi-i2c"; | |||||
reg = <0x7ef04500 0x100 0x7ef00b00 0x300>; | |||||
reg-names = "bsc", "auto-i2c"; | |||||
clock-frequency = <0x17cdc>; | |||||
status = "disabled"; | |||||
phandle = <0x22>; | |||||
}; | |||||
hdmi@7ef05700 { | |||||
compatible = "brcm,bcm2711-hdmi1"; | |||||
reg = <0x7ef05700 0x300 0x7ef05300 0x200 0x7ef05f00 0x80 0x7ef05f80 0x80 0x7ef06b00 0x200 0x7ef06f00 0x400 0x7ef00280 0x80 0x7ef09300 0x100 0x7ef20000 0x100 0x7ef00100 0x30>; | |||||
reg-names = "hdmi", "dvp", "phy", "rm", "packet", "metadata", "csc", "cec", "hd", "intr2"; | |||||
ddc = <0x23>; | |||||
clocks = <0x16 0xd>; | |||||
clock-names = "hdmi"; | |||||
resets = <0x21 0x1>; | |||||
dmas = <0xb 0x8000011>; | |||||
dma-names = "audio-rx"; | |||||
interrupts = <0x0 0x60 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0xce>; | |||||
}; | |||||
i2c@7ef09500 { | |||||
compatible = "brcm,bcm2711-hdmi-i2c"; | |||||
reg = <0x7ef09500 0x100 0x7ef05b00 0x300>; | |||||
reg-names = "bsc", "auto-i2c"; | |||||
clock-frequency = <0x17cdc>; | |||||
status = "disabled"; | |||||
phandle = <0x23>; | |||||
}; | |||||
}; | |||||
clocks { | |||||
clk-osc { | |||||
compatible = "fixed-clock"; | |||||
#clock-cells = <0x0>; | |||||
clock-output-names = "osc"; | |||||
clock-frequency = <0x337f980>; | |||||
phandle = <0x3>; | |||||
}; | |||||
clk-usb { | |||||
compatible = "fixed-clock"; | |||||
#clock-cells = <0x0>; | |||||
clock-output-names = "otg"; | |||||
clock-frequency = <0x1c9c3800>; | |||||
phandle = <0x18>; | |||||
}; | |||||
}; | |||||
phy { | |||||
compatible = "usb-nop-xceiv"; | |||||
#phy-cells = <0x0>; | |||||
phandle = <0x19>; | |||||
}; | |||||
emmc2bus { | |||||
compatible = "simple-bus"; | |||||
#address-cells = <0x2>; | |||||
#size-cells = <0x1>; | |||||
ranges = <0x0 0x7e000000 0x0 0xfe000000 0x1800000>; | |||||
dma-ranges = <0x0 0xc0000000 0x0 0x0 0x40000000>; | |||||
phandle = <0xcf>; | |||||
emmc2@7e340000 { | |||||
compatible = "brcm,bcm2711-emmc2"; | |||||
reg = <0x0 0x7e340000 0x100>; | |||||
interrupts = <0x0 0x7e 0x4>; | |||||
clocks = <0x7 0x33>; | |||||
status = "okay"; | |||||
vqmmc-supply = <0x24>; | |||||
broken-cd; | |||||
vmmc-supply = <0x25>; | |||||
phandle = <0x3b>; | |||||
}; | |||||
}; | |||||
arm-pmu { | |||||
compatible = "arm,cortex-a72-pmu", "arm,cortex-a15-pmu"; | |||||
interrupts = <0x0 0x10 0x4 0x0 0x11 0x4 0x0 0x12 0x4 0x0 0x13 0x4>; | |||||
interrupt-affinity = <0x26 0x27 0x28 0x29>; | |||||
}; | |||||
timer { | |||||
compatible = "arm,armv8-timer"; | |||||
interrupts = <0x1 0xd 0xf08 0x1 0xe 0xf08 0x1 0xb 0xf08 0x1 0xa 0xf08>; | |||||
arm,cpu-registers-not-fw-configured; | |||||
}; | |||||
cpus { | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x0>; | |||||
enable-method = "brcm,bcm2836-smp"; | |||||
phandle = <0xd0>; | |||||
cpu@0 { | |||||
device_type = "cpu"; | |||||
compatible = "arm,cortex-a72"; | |||||
reg = <0x0>; | |||||
enable-method = "spin-table"; | |||||
cpu-release-addr = <0x0 0xd8>; | |||||
phandle = <0x26>; | |||||
}; | |||||
cpu@1 { | |||||
device_type = "cpu"; | |||||
compatible = "arm,cortex-a72"; | |||||
reg = <0x1>; | |||||
enable-method = "spin-table"; | |||||
cpu-release-addr = <0x0 0xe0>; | |||||
phandle = <0x27>; | |||||
}; | |||||
cpu@2 { | |||||
device_type = "cpu"; | |||||
compatible = "arm,cortex-a72"; | |||||
reg = <0x2>; | |||||
enable-method = "spin-table"; | |||||
cpu-release-addr = <0x0 0xe8>; | |||||
phandle = <0x28>; | |||||
}; | |||||
cpu@3 { | |||||
device_type = "cpu"; | |||||
compatible = "arm,cortex-a72"; | |||||
reg = <0x3>; | |||||
enable-method = "spin-table"; | |||||
cpu-release-addr = <0x0 0xf0>; | |||||
phandle = <0x29>; | |||||
}; | |||||
}; | |||||
scb { | |||||
compatible = "simple-bus"; | |||||
#address-cells = <0x2>; | |||||
#size-cells = <0x2>; | |||||
ranges = <0x0 0x7c000000 0x0 0xfc000000 0x0 0x3800000 0x0 0x40000000 0x0 0xff800000 0x0 0x800000 0x6 0x0 0x6 0x0 0x0 0x40000000 0x0 0x0 0x0 0x0 0x0 0xfc000000>; | |||||
dma-ranges = <0x0 0x0 0x0 0x0 0x4 0x0>; | |||||
phandle = <0xd1>; | |||||
pcie@7d500000 { | |||||
compatible = "brcm,bcm2711-pcie"; | |||||
reg = <0x0 0x7d500000 0x0 0x9310>; | |||||
device_type = "pci"; | |||||
#address-cells = <0x3>; | |||||
#interrupt-cells = <0x1>; | |||||
#size-cells = <0x2>; | |||||
interrupts = <0x0 0x94 0x4 0x0 0x94 0x4>; | |||||
interrupt-names = "pcie", "msi"; | |||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>; | |||||
interrupt-map = <0x0 0x0 0x0 0x1 0x1 0x0 0x8f 0x4>; | |||||
msi-controller; | |||||
msi-parent = <0x2a>; | |||||
ranges = <0x2000000 0x0 0xf8000000 0x6 0x0 0x0 0x4000000>; | |||||
dma-ranges = <0x2000000 0x0 0x0 0x0 0x0 0x0 0xc0000000>; | |||||
brcm,enable-ssc; | |||||
phandle = <0x2a>; | |||||
pci@1,0 { | |||||
#address-cells = <0x3>; | |||||
#size-cells = <0x2>; | |||||
ranges; | |||||
reg = <0x0 0x0 0x0 0x0 0x0>; | |||||
usb@1,0 { | |||||
reg = <0x10000 0x0 0x0 0x0 0x0>; | |||||
resets = <0x2b 0x0>; | |||||
}; | |||||
}; | |||||
}; | |||||
ethernet@7d580000 { | |||||
compatible = "brcm,bcm2711-genet-v5", "brcm,genet-v5"; | |||||
reg = <0x0 0x7d580000 0x0 0x10000>; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x1>; | |||||
interrupts = <0x0 0x9d 0x4 0x0 0x9e 0x4>; | |||||
status = "okay"; | |||||
phy-handle = <0x2c>; | |||||
phy-mode = "rgmii-rxid"; | |||||
phandle = <0xd2>; | |||||
mdio@e14 { | |||||
compatible = "brcm,genet-mdio-v5"; | |||||
reg = <0xe14 0x8>; | |||||
reg-names = "mdio"; | |||||
#address-cells = <0x0>; | |||||
#size-cells = <0x1>; | |||||
phandle = <0xd3>; | |||||
ethernet-phy@1 { | |||||
reg = <0x1>; | |||||
led-modes = <0x0 0x8>; | |||||
phandle = <0x2c>; | |||||
}; | |||||
}; | |||||
}; | |||||
dma@7e007b00 { | |||||
compatible = "brcm,bcm2711-dma"; | |||||
reg = <0x0 0x7e007b00 0x0 0x400>; | |||||
interrupts = <0x0 0x59 0x4 0x0 0x5a 0x4 0x0 0x5b 0x4 0x0 0x5c 0x4>; | |||||
interrupt-names = "dma11", "dma12", "dma13", "dma14"; | |||||
#dma-cells = <0x1>; | |||||
brcm,dma-channel-mask = <0x7000>; | |||||
phandle = <0x3e>; | |||||
}; | |||||
xhci@7e9c0000 { | |||||
compatible = "generic-xhci"; | |||||
status = "disabled"; | |||||
reg = <0x0 0x7e9c0000 0x0 0x100000>; | |||||
interrupts = <0x0 0xb0 0x4>; | |||||
power-domains = <0x13 0x6>; | |||||
phandle = <0xd4>; | |||||
}; | |||||
hevc-decoder@7eb00000 { | |||||
compatible = "raspberrypi,rpivid-hevc-decoder"; | |||||
reg = <0x0 0x7eb00000 0x0 0x10000>; | |||||
status = "okay"; | |||||
}; | |||||
rpivid-local-intc@7eb10000 { | |||||
compatible = "raspberrypi,rpivid-local-intc"; | |||||
reg = <0x0 0x7eb10000 0x0 0x1000>; | |||||
status = "okay"; | |||||
interrupts = <0x0 0x62 0x4>; | |||||
}; | |||||
h264-decoder@7eb20000 { | |||||
compatible = "raspberrypi,rpivid-h264-decoder"; | |||||
reg = <0x0 0x7eb20000 0x0 0x10000>; | |||||
status = "okay"; | |||||
}; | |||||
vp9-decoder@7eb30000 { | |||||
compatible = "raspberrypi,rpivid-vp9-decoder"; | |||||
reg = <0x0 0x7eb30000 0x0 0x10000>; | |||||
status = "okay"; | |||||
}; | |||||
}; | |||||
leds { | |||||
compatible = "gpio-leds"; | |||||
phandle = <0xd5>; | |||||
act { | |||||
label = "led0"; | |||||
default-state = "keep"; | |||||
linux,default-trigger = "mmc0"; | |||||
gpios = <0xf 0x2a 0x0>; | |||||
phandle = <0x3c>; | |||||
}; | |||||
pwr { | |||||
label = "led1"; | |||||
gpios = <0xa 0x2 0x1>; | |||||
default-state = "keep"; | |||||
linux,default-trigger = "default-on"; | |||||
phandle = <0x3d>; | |||||
}; | |||||
}; | |||||
memory@0 { | |||||
device_type = "memory"; | |||||
reg = <0x0 0x0 0x0>; | |||||
}; | |||||
sd_io_1v8_reg { | |||||
compatible = "regulator-gpio"; | |||||
regulator-name = "vdd-sd-io"; | |||||
regulator-min-microvolt = <0x1b7740>; | |||||
regulator-max-microvolt = <0x325aa0>; | |||||
regulator-boot-on; | |||||
regulator-always-on; | |||||
regulator-settling-time-us = <0x1388>; | |||||
gpios = <0xa 0x4 0x0>; | |||||
states = <0x1b7740 0x1 0x325aa0 0x0>; | |||||
status = "okay"; | |||||
phandle = <0x24>; | |||||
}; | |||||
__overrides__ { | |||||
cam0-pwdn-ctrl; | |||||
cam0-pwdn; | |||||
cam0-led-ctrl; | |||||
cam0-led; | |||||
krnbt = [00 00 00 2d 73 74 61 74 75 73 00]; | |||||
krnbt_baudrate = <0x2d 0x6d61782d 0x73706565 0x643a3000>; | |||||
cache_line_size; | |||||
uart0 = [00 00 00 2e 73 74 61 74 75 73 00]; | |||||
uart1 = [00 00 00 2f 73 74 61 74 75 73 00]; | |||||
i2s = [00 00 00 30 73 74 61 74 75 73 00]; | |||||
spi = [00 00 00 31 73 74 61 74 75 73 00]; | |||||
i2c0 = [00 00 00 10 73 74 61 74 75 73 00 00 00 00 32 73 74 61 74 75 73 00]; | |||||
i2c1 = [00 00 00 33 73 74 61 74 75 73 00]; | |||||
i2c0_baudrate = [00 00 00 10 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |||||
i2c1_baudrate = [00 00 00 33 63 6c 6f 63 6b 2d 66 72 65 71 75 65 6e 63 79 3a 30 00]; | |||||
audio = [00 00 00 34 73 74 61 74 75 73 00]; | |||||
watchdog = [00 00 00 35 73 74 61 74 75 73 00]; | |||||
random = [00 00 00 36 73 74 61 74 75 73 00]; | |||||
sd_overclock = <0x37 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000>; | |||||
sd_force_pio = <0x37 0x6272636d 0x2c666f72 0x63652d70 0x696f3f00>; | |||||
sd_pio_limit = [00 00 00 37 62 72 63 6d 2c 70 69 6f 2d 6c 69 6d 69 74 3a 30 00]; | |||||
sd_debug = [00 00 00 37 62 72 63 6d 2c 64 65 62 75 67 00]; | |||||
sdio_overclock = <0x38 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000 0x39 0x6272636d 0x2c6f7665 0x72636c6f 0x636b2d35 0x303a3000>; | |||||
axiperf = [00 00 00 3a 73 74 61 74 75 73 00]; | |||||
arm_freq; | |||||
sd_poll_once = [00 00 00 3b 6e 6f 6e 2d 72 65 6d 6f 76 61 62 6c 65 3f 00]; | |||||
act_led_gpio = <0x3c 0x6770696f 0x733a3400>; | |||||
act_led_activelow = <0x3c 0x6770696f 0x733a3800>; | |||||
act_led_trigger = [00 00 00 3c 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00]; | |||||
pwr_led_gpio = <0x3d 0x6770696f 0x733a3400>; | |||||
pwr_led_activelow = <0x3d 0x6770696f 0x733a3800>; | |||||
pwr_led_trigger = [00 00 00 3d 6c 69 6e 75 78 2c 64 65 66 61 75 6c 74 2d 74 72 69 67 67 65 72 00]; | |||||
eth_led0 = <0x2c 0x6c65642d 0x6d6f6465 0x733a3000>; | |||||
eth_led1 = <0x2c 0x6c65642d 0x6d6f6465 0x733a3400>; | |||||
spi_dma4 = <0x31 0x646d6173 0x3a303d00 0x3e 0x31 0x646d6173 0x3a383d00 0x3e>; | |||||
}; | |||||
fixedregulator_3v3 { | |||||
compatible = "regulator-fixed"; | |||||
regulator-always-on; | |||||
regulator-max-microvolt = <0x325aa0>; | |||||
regulator-min-microvolt = <0x325aa0>; | |||||
regulator-name = "3v3"; | |||||
phandle = <0xd6>; | |||||
}; | |||||
fixedregulator_5v0 { | |||||
compatible = "regulator-fixed"; | |||||
regulator-always-on; | |||||
regulator-max-microvolt = <0x4c4b40>; | |||||
regulator-min-microvolt = <0x4c4b40>; | |||||
regulator-name = "5v0"; | |||||
phandle = <0xd7>; | |||||
}; | |||||
v3dbus { | |||||
compatible = "simple-bus"; | |||||
#address-cells = <0x1>; | |||||
#size-cells = <0x2>; | |||||
ranges = <0x7c500000 0x0 0xfc500000 0x0 0x3300000 0x40000000 0x0 0xff800000 0x0 0x800000>; | |||||
dma-ranges = <0x0 0x0 0x0 0x4 0x0>; | |||||
phandle = <0xd8>; | |||||
v3d@7ec04000 { | |||||
compatible = "brcm,2711-v3d"; | |||||
reg = <0x7ec00000 0x0 0x4000 0x7ec04000 0x0 0x4000>; | |||||
reg-names = "hub", "core0"; | |||||
power-domains = <0x35 0x1>; | |||||
resets = <0x35 0x0>; | |||||
clocks = <0x16 0x5>; | |||||
clocks-names = "v3d"; | |||||
interrupts = <0x0 0x4a 0x4>; | |||||
status = "disabled"; | |||||
phandle = <0xd9>; | |||||
}; | |||||
}; | |||||
gpu { | |||||
compatible = "brcm,bcm2711-vc5"; | |||||
status = "disabled"; | |||||
phandle = <0xda>; | |||||
}; | |||||
clk-108M { | |||||
#clock-cells = <0x0>; | |||||
compatible = "fixed-clock"; | |||||
clock-frequency = <0x66ff300>; | |||||
clock-output-names = "108MHz-clock"; | |||||
phandle = <0x20>; | |||||
}; | |||||
sd_vcc_reg { | |||||
compatible = "regulator-fixed"; | |||||
regulator-name = "vcc-sd"; | |||||
regulator-min-microvolt = <0x325aa0>; | |||||
regulator-max-microvolt = <0x325aa0>; | |||||
regulator-boot-on; | |||||
enable-active-high; | |||||
gpio = <0xa 0x6 0x0>; | |||||
phandle = <0x25>; | |||||
}; | |||||
__symbols__ { | |||||
rmem = "/reserved-memory"; | |||||
cma = "/reserved-memory/linux,cma"; | |||||
cpu_thermal = "/thermal-zones/cpu-thermal"; | |||||
soc = "/soc"; | |||||
system_timer = "/soc/timer@7e003000"; | |||||
txp = "/soc/txp@7e004000"; | |||||
clocks = "/soc/cprman@7e101000"; | |||||
random = "/soc/rng@7e104000"; | |||||
mailbox = "/soc/mailbox@7e00b880"; | |||||
gpio = "/soc/gpio@7e200000"; | |||||
dpi_gpio0 = "/soc/gpio@7e200000/dpi_gpio0"; | |||||
emmc_gpio22 = "/soc/gpio@7e200000/emmc_gpio22"; | |||||
emmc_gpio34 = "/soc/gpio@7e200000/emmc_gpio34"; | |||||
emmc_gpio48 = "/soc/gpio@7e200000/emmc_gpio48"; | |||||
gpclk0_gpio4 = "/soc/gpio@7e200000/gpclk0_gpio4"; | |||||
gpclk1_gpio5 = "/soc/gpio@7e200000/gpclk1_gpio5"; | |||||
gpclk1_gpio42 = "/soc/gpio@7e200000/gpclk1_gpio42"; | |||||
gpclk1_gpio44 = "/soc/gpio@7e200000/gpclk1_gpio44"; | |||||
gpclk2_gpio6 = "/soc/gpio@7e200000/gpclk2_gpio6"; | |||||
gpclk2_gpio43 = "/soc/gpio@7e200000/gpclk2_gpio43"; | |||||
i2c0_gpio0 = "/soc/gpio@7e200000/i2c0_gpio0"; | |||||
i2c0_gpio28 = "/soc/gpio@7e200000/i2c0_gpio28"; | |||||
i2c0_gpio44 = "/soc/gpio@7e200000/i2c0_gpio44"; | |||||
i2c1_gpio2 = "/soc/gpio@7e200000/i2c1_gpio2"; | |||||
i2c1_gpio44 = "/soc/gpio@7e200000/i2c1_gpio44"; | |||||
jtag_gpio22 = "/soc/gpio@7e200000/jtag_gpio22"; | |||||
pcm_gpio18 = "/soc/gpio@7e200000/pcm_gpio18"; | |||||
pcm_gpio28 = "/soc/gpio@7e200000/pcm_gpio28"; | |||||
sdhost_gpio48 = "/soc/gpio@7e200000/sdhost_gpio48"; | |||||
spi0_gpio7 = "/soc/gpio@7e200000/spi0_gpio7"; | |||||
spi0_gpio35 = "/soc/gpio@7e200000/spi0_gpio35"; | |||||
spi1_gpio16 = "/soc/gpio@7e200000/spi1_gpio16"; | |||||
spi2_gpio40 = "/soc/gpio@7e200000/spi2_gpio40"; | |||||
uart0_gpio14 = "/soc/gpio@7e200000/uart0_gpio14"; | |||||
uart0_ctsrts_gpio16 = "/soc/gpio@7e200000/uart0_ctsrts_gpio16"; | |||||
uart0_ctsrts_gpio30 = "/soc/gpio@7e200000/uart0_ctsrts_gpio30"; | |||||
uart0_gpio32 = "/soc/gpio@7e200000/uart0_gpio32"; | |||||
uart0_gpio36 = "/soc/gpio@7e200000/uart0_gpio36"; | |||||
uart0_ctsrts_gpio38 = "/soc/gpio@7e200000/uart0_ctsrts_gpio38"; | |||||
uart1_gpio14 = "/soc/gpio@7e200000/uart1_gpio14"; | |||||
uart1_ctsrts_gpio16 = "/soc/gpio@7e200000/uart1_ctsrts_gpio16"; | |||||
uart1_gpio32 = "/soc/gpio@7e200000/uart1_gpio32"; | |||||
uart1_ctsrts_gpio30 = "/soc/gpio@7e200000/uart1_ctsrts_gpio30"; | |||||
uart1_gpio40 = "/soc/gpio@7e200000/uart1_gpio40"; | |||||
uart1_ctsrts_gpio42 = "/soc/gpio@7e200000/uart1_ctsrts_gpio42"; | |||||
gpclk0_gpio49 = "/soc/gpio@7e200000/gpclk0_gpio49"; | |||||
gpclk1_gpio50 = "/soc/gpio@7e200000/gpclk1_gpio50"; | |||||
gpclk2_gpio51 = "/soc/gpio@7e200000/gpclk2_gpio51"; | |||||
i2c0_gpio46 = "/soc/gpio@7e200000/i2c0_gpio46"; | |||||
i2c1_gpio46 = "/soc/gpio@7e200000/i2c1_gpio46"; | |||||
i2c3_gpio2 = "/soc/gpio@7e200000/i2c3_gpio2"; | |||||
i2c3_gpio4 = "/soc/gpio@7e200000/i2c3_gpio4"; | |||||
i2c4_gpio6 = "/soc/gpio@7e200000/i2c4_gpio6"; | |||||
i2c4_gpio8 = "/soc/gpio@7e200000/i2c4_gpio8"; | |||||
i2c5_gpio10 = "/soc/gpio@7e200000/i2c5_gpio10"; | |||||
i2c5_gpio12 = "/soc/gpio@7e200000/i2c5_gpio12"; | |||||
i2c6_gpio0 = "/soc/gpio@7e200000/i2c6_gpio0"; | |||||
i2c6_gpio22 = "/soc/gpio@7e200000/i2c6_gpio22"; | |||||
i2c_slave_gpio8 = "/soc/gpio@7e200000/i2c_slave_gpio8"; | |||||
jtag_gpio48 = "/soc/gpio@7e200000/jtag_gpio48"; | |||||
mii_gpio28 = "/soc/gpio@7e200000/mii_gpio28"; | |||||
mii_gpio36 = "/soc/gpio@7e200000/mii_gpio36"; | |||||
pcm_gpio50 = "/soc/gpio@7e200000/pcm_gpio50"; | |||||
pwm0_0_gpio12 = "/soc/gpio@7e200000/pwm0_0_gpio12"; | |||||
pwm0_0_gpio18 = "/soc/gpio@7e200000/pwm0_0_gpio18"; | |||||
pwm1_0_gpio40 = "/soc/gpio@7e200000/pwm1_0_gpio40"; | |||||
pwm0_1_gpio13 = "/soc/gpio@7e200000/pwm0_1_gpio13"; | |||||
pwm0_1_gpio19 = "/soc/gpio@7e200000/pwm0_1_gpio19"; | |||||
pwm1_1_gpio41 = "/soc/gpio@7e200000/pwm1_1_gpio41"; | |||||
pwm0_1_gpio45 = "/soc/gpio@7e200000/pwm0_1_gpio45"; | |||||
pwm0_0_gpio52 = "/soc/gpio@7e200000/pwm0_0_gpio52"; | |||||
pwm0_1_gpio53 = "/soc/gpio@7e200000/pwm0_1_gpio53"; | |||||
rgmii_gpio35 = "/soc/gpio@7e200000/rgmii_gpio35"; | |||||
rgmii_irq_gpio34 = "/soc/gpio@7e200000/rgmii_irq_gpio34"; | |||||
rgmii_irq_gpio39 = "/soc/gpio@7e200000/rgmii_irq_gpio39"; | |||||
rgmii_mdio_gpio28 = "/soc/gpio@7e200000/rgmii_mdio_gpio28"; | |||||
rgmii_mdio_gpio37 = "/soc/gpio@7e200000/rgmii_mdio_gpio37"; | |||||
spi0_gpio46 = "/soc/gpio@7e200000/spi0_gpio46"; | |||||
spi2_gpio46 = "/soc/gpio@7e200000/spi2_gpio46"; | |||||
spi3_gpio0 = "/soc/gpio@7e200000/spi3_gpio0"; | |||||
spi4_gpio4 = "/soc/gpio@7e200000/spi4_gpio4"; | |||||
spi5_gpio12 = "/soc/gpio@7e200000/spi5_gpio12"; | |||||
spi6_gpio18 = "/soc/gpio@7e200000/spi6_gpio18"; | |||||
uart2_gpio0 = "/soc/gpio@7e200000/uart2_gpio0"; | |||||
uart2_ctsrts_gpio2 = "/soc/gpio@7e200000/uart2_ctsrts_gpio2"; | |||||
uart3_gpio4 = "/soc/gpio@7e200000/uart3_gpio4"; | |||||
uart3_ctsrts_gpio6 = "/soc/gpio@7e200000/uart3_ctsrts_gpio6"; | |||||
uart4_gpio8 = "/soc/gpio@7e200000/uart4_gpio8"; | |||||
uart4_ctsrts_gpio10 = "/soc/gpio@7e200000/uart4_ctsrts_gpio10"; | |||||
uart5_gpio12 = "/soc/gpio@7e200000/uart5_gpio12"; | |||||
uart5_ctsrts_gpio14 = "/soc/gpio@7e200000/uart5_ctsrts_gpio14"; | |||||
gpioout = "/soc/gpio@7e200000/gpioout"; | |||||
alt0 = "/soc/gpio@7e200000/alt0"; | |||||
dpi_18bit_gpio0 = "/soc/gpio@7e200000/dpi_18bit_gpio0"; | |||||
spi0_pins = "/soc/gpio@7e200000/spi0_pins"; | |||||
spi0_cs_pins = "/soc/gpio@7e200000/spi0_cs_pins"; | |||||
spi3_pins = "/soc/gpio@7e200000/spi3_pins"; | |||||
spi3_cs_pins = "/soc/gpio@7e200000/spi3_cs_pins"; | |||||
spi4_pins = "/soc/gpio@7e200000/spi4_pins"; | |||||
spi4_cs_pins = "/soc/gpio@7e200000/spi4_cs_pins"; | |||||
spi5_pins = "/soc/gpio@7e200000/spi5_pins"; | |||||
spi5_cs_pins = "/soc/gpio@7e200000/spi5_cs_pins"; | |||||
spi6_pins = "/soc/gpio@7e200000/spi6_pins"; | |||||
spi6_cs_pins = "/soc/gpio@7e200000/spi6_cs_pins"; | |||||
i2c0_pins = "/soc/gpio@7e200000/i2c0"; | |||||
i2c1_pins = "/soc/gpio@7e200000/i2c1"; | |||||
i2c3_pins = "/soc/gpio@7e200000/i2c3"; | |||||
i2c4_pins = "/soc/gpio@7e200000/i2c4"; | |||||
i2c5_pins = "/soc/gpio@7e200000/i2c5"; | |||||
i2c6_pins = "/soc/gpio@7e200000/i2c6"; | |||||
i2s_pins = "/soc/gpio@7e200000/i2s"; | |||||
sdio_pins = "/soc/gpio@7e200000/sdio_pins"; | |||||
bt_pins = "/soc/gpio@7e200000/bt_pins"; | |||||
uart0_pins = "/soc/gpio@7e200000/uart0_pins"; | |||||
uart1_pins = "/soc/gpio@7e200000/uart1_pins"; | |||||
uart2_pins = "/soc/gpio@7e200000/uart2_pins"; | |||||
uart3_pins = "/soc/gpio@7e200000/uart3_pins"; | |||||
uart4_pins = "/soc/gpio@7e200000/uart4_pins"; | |||||
uart5_pins = "/soc/gpio@7e200000/uart5_pins"; | |||||
audio_pins = "/soc/gpio@7e200000/audio_pins"; | |||||
uart0 = "/soc/serial@7e201000"; | |||||
bt = "/soc/serial@7e201000/bluetooth"; | |||||
sdhost = "/soc/mmc@7e202000"; | |||||
i2s = "/soc/i2s@7e203000"; | |||||
spi0 = "/soc/spi@7e204000"; | |||||
spi = "/soc/spi@7e204000"; | |||||
spidev0 = "/soc/spi@7e204000/spidev@0"; | |||||
spidev1 = "/soc/spi@7e204000/spidev@1"; | |||||
i2c0if = "/soc/i2c@7e205000"; | |||||
i2c0mux = "/soc/i2c0mux"; | |||||
i2c0 = "/soc/i2c0mux/i2c@0"; | |||||
i2c_csi_dsi = "/soc/i2c0mux/i2c@1"; | |||||
dpi = "/soc/dpi@7e208000"; | |||||
dsi0 = "/soc/dsi@7e209000"; | |||||
aux = "/soc/aux@7e215000"; | |||||
uart1 = "/soc/serial@7e215040"; | |||||
minibt = "/soc/serial@7e215040/bluetooth"; | |||||
spi1 = "/soc/spi@7e215080"; | |||||
spi2 = "/soc/spi@7e2150c0"; | |||||
pwm = "/soc/pwm@7e20c000"; | |||||
hvs = "/soc/hvs@7e400000"; | |||||
dsi1 = "/soc/dsi@7e700000"; | |||||
i2c1 = "/soc/i2c@7e804000"; | |||||
vec = "/soc/vec@7e806000"; | |||||
usb = "/soc/usb@7e980000"; | |||||
local_intc = "/soc/local_intc@40000000"; | |||||
gicv2 = "/soc/interrupt-controller@40041000"; | |||||
avs_monitor = "/soc/avs-monitor@7d5d2000"; | |||||
thermal = "/soc/avs-monitor@7d5d2000/thermal"; | |||||
dma = "/soc/dma@7e007000"; | |||||
watchdog = "/soc/watchdog@7e100000"; | |||||
pm = "/soc/watchdog@7e100000"; | |||||
uart2 = "/soc/serial@7e201400"; | |||||
uart3 = "/soc/serial@7e201600"; | |||||
uart4 = "/soc/serial@7e201800"; | |||||
uart5 = "/soc/serial@7e201a00"; | |||||
spi3 = "/soc/spi@7e204600"; | |||||
spi4 = "/soc/spi@7e204800"; | |||||
spi5 = "/soc/spi@7e204a00"; | |||||
spi6 = "/soc/spi@7e204c00"; | |||||
i2c3 = "/soc/i2c@7e205600"; | |||||
i2c4 = "/soc/i2c@7e205800"; | |||||
i2c5 = "/soc/i2c@7e205a00"; | |||||
i2c6 = "/soc/i2c@7e205c00"; | |||||
pwm1 = "/soc/pwm@7e20c800"; | |||||
firmware = "/soc/firmware"; | |||||
firmware_clocks = "/soc/firmware/clocks"; | |||||
expgpio = "/soc/firmware/gpio"; | |||||
reset = "/soc/firmware/reset"; | |||||
power = "/soc/power"; | |||||
vchiq = "/soc/mailbox@7e00b840"; | |||||
audio = "/soc/mailbox@7e00b840/bcm2835_audio"; | |||||
pixelvalve0 = "/soc/pixelvalve@7e206000"; | |||||
pixelvalve1 = "/soc/pixelvalve@7e207000"; | |||||
sdhci = "/soc/mmc@7e300000"; | |||||
mmc = "/soc/mmc@7e300000"; | |||||
mmcnr = "/soc/mmcnr@7e300000"; | |||||
firmwarekms = "/soc/firmwarekms@7e600000"; | |||||
smi = "/soc/smi@7e600000"; | |||||
csi0 = "/soc/csi@7e800000"; | |||||
csi1 = "/soc/csi@7e801000"; | |||||
axiperf = "/soc/axiperf"; | |||||
fb = "/soc/fb"; | |||||
vcsm = "/soc/vcsm"; | |||||
sound = "/soc/sound"; | |||||
pixelvalve2 = "/soc/pixelvalve@7e20a000"; | |||||
pixelvalve4 = "/soc/pixelvalve@7e216000"; | |||||
pixelvalve3 = "/soc/pixelvalve@7ec12000"; | |||||
dvp = "/soc/clock@7ef00000"; | |||||
hdmi0 = "/soc/hdmi@7ef00700"; | |||||
ddc0 = "/soc/i2c@7ef04500"; | |||||
hdmi1 = "/soc/hdmi@7ef05700"; | |||||
ddc1 = "/soc/i2c@7ef09500"; | |||||
clk_osc = "/clocks/clk-osc"; | |||||
clk_usb = "/clocks/clk-usb"; | |||||
usbphy = "/phy"; | |||||
emmc2bus = "/emmc2bus"; | |||||
emmc2 = "/emmc2bus/emmc2@7e340000"; | |||||
cpus = "/cpus"; | |||||
cpu0 = "/cpus/cpu@0"; | |||||
cpu1 = "/cpus/cpu@1"; | |||||
cpu2 = "/cpus/cpu@2"; | |||||
cpu3 = "/cpus/cpu@3"; | |||||
scb = "/scb"; | |||||
pcie0 = "/scb/pcie@7d500000"; | |||||
genet = "/scb/ethernet@7d580000"; | |||||
genet_mdio = "/scb/ethernet@7d580000/mdio@e14"; | |||||
phy1 = "/scb/ethernet@7d580000/mdio@e14/ethernet-phy@1"; | |||||
dma40 = "/scb/dma@7e007b00"; | |||||
xhci = "/scb/xhci@7e9c0000"; | |||||
leds = "/leds"; | |||||
act_led = "/leds/act"; | |||||
pwr_led = "/leds/pwr"; | |||||
sd_io_1v8_reg = "/sd_io_1v8_reg"; | |||||
vdd_3v3_reg = "/fixedregulator_3v3"; | |||||
vdd_5v0_reg = "/fixedregulator_5v0"; | |||||
v3dbus = "/v3dbus"; | |||||
v3d = "/v3dbus/v3d@7ec04000"; | |||||
vc4 = "/gpu"; | |||||
clk_108MHz = "/clk-108M"; | |||||
sd_vcc_reg = "/sd_vcc_reg"; | |||||
}; | |||||
}; |