Differential D17965 Diff 51973 sysutils/graylog/files/server.conf.in

Changeset View

Standalone View

sysutils/graylog/files/server.conf.in

	# If you are running more than one instances of graylog2-server you have to select one of these			############################
				# GRAYLOG CONFIGURATION FILE
				############################
				#
				# This is the Graylog configuration file. The file has to use ISO 8859-1/Latin-1 character encoding.
				# Characters that cannot be directly represented in this encoding can be written using Unicode escapes
				# as defined in https://docs.oracle.com/javase/specs/jls/se8/html/jls-3.html#jls-3.3, using the \u prefix.
				# For example, \u002c.
				#
				# * Entries are generally expected to be a single line of the form, one of the following:
				#
				# propertyName=propertyValue
				# propertyName:propertyValue
				#
				# * White space that appears between the property name and property value is ignored,
				# so the following are equivalent:
				#
				# name=Stephen
				# name = Stephen
				#
				# * White space at the beginning of the line is also ignored.
				#
				# * Lines that start with the comment characters ! or # are ignored. Blank lines are also ignored.
				#
				# * The property value is generally terminated by the end of the line. White space following the
				# property value is not ignored, and is treated as part of the property value.
				#
				# * A property value can span several lines if each line is terminated by a backslash (‘\’) character.
				# For example:
				#
				# targetCities=\
				# Detroit,\
				# Chicago,\
				# Los Angeles
				#
				# This is equivalent to targetCities=Detroit,Chicago,Los Angeles (white space at the beginning of lines is ignored).
				#
				# * The characters newline, carriage return, and tab can be inserted with characters \n, \r, and \t, respectively.
				#
				# * The backslash character must be escaped as a double backslash. For example:
				#
				# path=c:\\docs\\doc1
				#

				# If you are running more than one instances of Graylog server you have to select one of these
	# instances as master. The master will perform some periodical tasks that non-masters won't perform.			# instances as master. The master will perform some periodical tasks that non-masters won't perform.
	is_master = true			is_master = true

	# The auto-generated node ID will be stored in this file and read after restarts. It is a good idea			# The auto-generated node ID will be stored in this file and read after restarts. It is a good idea
	# to use an absolute file path here if you are starting graylog2-server from init scripts or similar.			# to use an absolute file path here if you are starting Graylog server from init scripts or similar.
	node_id_file = /var/graylog/server/node-id			node_id_file = %%GRAYLOG_DATA_DIR%%/node-id

	# You MUST set a secret to secure/pepper the stored user passwords here. Use at least 64 characters.			# You MUST set a secret to secure/pepper the stored user passwords here. Use at least 64 characters.
	# Generate one by using for example: pwgen -N 1 -s 96			# Generate one by using for example: pwgen -N 1 -s 96
	password_secret =			password_secret =

	# The default root user is named 'admin'			# The default root user is named 'admin'
	#root_username = admin			#root_username = admin

	# You MUST specify a hash password for the root user (which you only need to initially set up the			# You MUST specify a hash password for the root user (which you only need to initially set up the
	# system and in case you lose connectivity to your authentication backend)			# system and in case you lose connectivity to your authentication backend)
	# This password cannot be changed using the API or via the web interface. If you need to change it,			# This password cannot be changed using the API or via the web interface. If you need to change it,
	# modify it in this file.			# modify it in this file.
	# Create one by using for example: echo -n yourpassword \| shasum -a 256			# Create one by using for example: echo -n yourpassword \| shasum -a 256
	# and put the resulting hash value into the following line			# and put the resulting hash value into the following line
	root_password_sha2 =			root_password_sha2 =

	# The email address of the root user.			# The email address of the root user.
	# Default is empty			# Default is empty
	#root_email = ""			#root_email = ""

	# The time zone setting of the root user.			# The time zone setting of the root user. See http://www.joda.org/joda-time/timezones.html for a list of valid time zones.
	# Default is UTC			# Default is UTC
	#root_timezone = UTC			#root_timezone = UTC

	# Set plugin directory here (relative or absolute)			# Set plugin directory here (relative or absolute)
	plugin_dir = %%DATADIR%%/plugin			plugin_dir = %%DATADIR%%/plugin

	# REST API listen URI. Must be reachable by other graylog2-server nodes if you run a cluster.			# REST API listen URI. Must be reachable by other Graylog server nodes if you run a cluster.
	rest_listen_uri = http://127.0.0.1:12900/			# When using Graylog Collectors, this URI will be used to receive heartbeat messages and must be accessible for all collectors.
				rest_listen_uri = http://127.0.0.1:9000/api/

	# REST API transport address. Defaults to the value of rest_listen_uri. Exception: If rest_listen_uri			# REST API transport address. Defaults to the value of rest_listen_uri. Exception: If rest_listen_uri
	# is set to a wildcard IP address (0.0.0.0) the first non-loopback IPv4 system address is used.			# is set to a wildcard IP address (0.0.0.0) the first non-loopback IPv4 system address is used.
	# If set, his will be promoted in the cluster discovery APIs, so other nodes may try to connect on			# If set, this will be promoted in the cluster discovery APIs, so other nodes may try to connect on
	# this address and it is used to generate URLs addressing entities in the REST API. (see rest_listen_uri)			# this address and it is used to generate URLs addressing entities in the REST API. (see rest_listen_uri)
	# You will need to define this, if your Graylog server is running behind a HTTP proxy that is rewriting			# You will need to define this, if your Graylog server is running behind a HTTP proxy that is rewriting
	# the scheme, host name or URI.			# the scheme, host name or URI.
	#rest_transport_uri = http://192.168.1.1:12900/			# This must not contain a wildcard address (0.0.0.0).
				#rest_transport_uri = http://192.168.1.1:9000/api/

	# Enable CORS headers for REST API. This is necessary for JS-clients accessing the server directly.			# Enable CORS headers for REST API. This is necessary for JS-clients accessing the server directly.
	# If these are disabled, modern browsers will not be able to retrieve resources from the server.			# If these are disabled, modern browsers will not be able to retrieve resources from the server.
	# This is disabled by default. Uncomment the next line to enable it.			# This is enabled by default. Uncomment the next line to disable it.
	#rest_enable_cors = true			#rest_enable_cors = false

	# Enable GZIP support for REST API. This compresses API responses and therefore helps to reduce			# Enable GZIP support for REST API. This compresses API responses and therefore helps to reduce
	# overall round trip times. This is disabled by default. Uncomment the next line to enable it.			# overall round trip times. This is enabled by default. Uncomment the next line to disable it.
	#rest_enable_gzip = true			#rest_enable_gzip = false

	# Enable HTTPS support for the REST API. This secures the communication with the REST API with			# Enable HTTPS support for the REST API. This secures the communication with the REST API with
	# TLS to prevent request forgery and eavesdropping. This is disabled by default. Uncomment the			# TLS to prevent request forgery and eavesdropping. This is disabled by default. Uncomment the
	# next line to enable it.			# next line to enable it.
	#rest_enable_tls = true			#rest_enable_tls = true

	# The X.509 certificate file to use for securing the REST API.			# The X.509 certificate chain file in PEM format to use for securing the REST API.
	#rest_tls_cert_file = /path/to/graylog2.crt			#rest_tls_cert_file = /path/to/graylog.crt

	# The private key to use for securing the REST API.			# The PKCS#8 private key file in PEM format to use for securing the REST API.
	#rest_tls_key_file = /path/to/graylog2.key			#rest_tls_key_file = /path/to/graylog.key

	# The password to unlock the private key used for securing the REST API.			# The password to unlock the private key used for securing the REST API.
	#rest_tls_key_password = secret			#rest_tls_key_password = secret

	# The maximum size of a single HTTP chunk in bytes.
	#rest_max_chunk_size = 8192

	# The maximum size of the HTTP request headers in bytes.			# The maximum size of the HTTP request headers in bytes.
	#rest_max_header_size = 8192			#rest_max_header_size = 8192

	# The maximal length of the initial HTTP/1.1 line in bytes.			# The size of the thread pool used exclusively for serving the REST API.
	#rest_max_initial_line_length = 4096

	# The size of the execution handler thread pool used exclusively for serving the REST API.
	#rest_thread_pool_size = 16			#rest_thread_pool_size = 16

	# The size of the worker thread pool used exclusively for serving the REST API.			# Comma separated list of trusted proxies that are allowed to set the client address with X-Forwarded-For
	#rest_worker_threads_max_pool_size = 16			# header. May be subnets, or hosts.
				#trusted_proxies = 127.0.0.1/32, 0:0:0:0:0:0:0:1/128

	# Embedded Elasticsearch configuration file			# Enable the embedded Graylog web interface.
	# pay attention to the working directory of the server, maybe use an absolute path here			# Default: true
	#elasticsearch_config_file = /usr/local/etc/graylog/server/elasticsearch.yml			#web_enable = false

				# Web interface listen URI.
				# Configuring a path for the URI here effectively prefixes all URIs in the web interface. This is a replacement
				# for the application.context configuration parameter in pre-2.0 versions of the Graylog web interface.
				#web_listen_uri = http://127.0.0.1:9000/

				# Web interface endpoint URI. This setting can be overriden on a per-request basis with the X-Graylog-Server-URL header.
				# Default: $rest_transport_uri
				#web_endpoint_uri =

				# Enable CORS headers for the web interface. This is necessary for JS-clients accessing the server directly.
				# If these are disabled, modern browsers will not be able to retrieve resources from the server.
				#web_enable_cors = false

				# Enable/disable GZIP support for the web interface. This compresses HTTP responses and therefore helps to reduce
				# overall round trip times. This is enabled by default. Uncomment the next line to disable it.
				#web_enable_gzip = false

				# Enable HTTPS support for the web interface. This secures the communication of the web browser with the web interface
				# using TLS to prevent request forgery and eavesdropping.
				# This is disabled by default. Uncomment the next line to enable it and see the other related configuration settings.
				#web_enable_tls = true

				# The X.509 certificate chain file in PEM format to use for securing the web interface.
				#web_tls_cert_file = /path/to/graylog-web.crt

				# The PKCS#8 private key file in PEM format to use for securing the web interface.
				#web_tls_key_file = /path/to/graylog-web.key

				# The password to unlock the private key used for securing the web interface.
				#web_tls_key_password = secret

				# The maximum size of the HTTP request headers in bytes.
				#web_max_header_size = 8192

				# The size of the thread pool used exclusively for serving the web interface.
				#web_thread_pool_size = 16

				# List of Elasticsearch hosts Graylog should connect to.
				# Need to be specified as a comma-separated list of valid URIs for the http ports of your elasticsearch nodes.
				# If one or more of your elasticsearch hosts require authentication, include the credentials in each node URI that
				# requires authentication.
				#
				# Default: http://127.0.0.1:9200
				#elasticsearch_hosts = http://node1:9200,http://user:password@node2:19200

				# Maximum amount of time to wait for successfull connection to Elasticsearch HTTP port.
				#
				# Default: 10 Seconds
				#elasticsearch_connect_timeout = 10s

				# Maximum amount of time to wait for reading back a response from an Elasticsearch server.
				#
				# Default: 60 seconds
				#elasticsearch_socket_timeout = 60s

				# Maximum idle time for an Elasticsearch connection. If this is exceeded, this connection will
				# be tore down.
				#
				# Default: inf
				#elasticsearch_idle_timeout = -1s

				# Maximum number of total connections to Elasticsearch.
				#
				# Default: 20
				#elasticsearch_max_total_connections = 20

				# Maximum number of total connections per Elasticsearch route (normally this means per
				# elasticsearch server).
				#
				# Default: 2
				#elasticsearch_max_total_connections_per_route = 2

				# Maximum number of times Graylog will retry failed requests to Elasticsearch.
				#
				# Default: 2
				#elasticsearch_max_retries = 2

				# Enable automatic Elasticsearch node discovery through Nodes Info,
				# see https://www.elastic.co/guide/en/elasticsearch/reference/5.4/cluster-nodes-info.html
				#
				# WARNING: Automatic node discovery does not work if Elasticsearch requires authentication, e. g. with Shield.
				#
				# Default: false
				#elasticsearch_discovery_enabled = true

				# Filter for including/excluding Elasticsearch nodes in discovery according to their custom attributes,
				# see https://www.elastic.co/guide/en/elasticsearch/reference/5.4/cluster.html#cluster-nodes
				#
				# Default: empty
				#elasticsearch_discovery_filter = rack:42

				# Frequency of the Elasticsearch node discovery.
				#
				# Default: 30s
				# elasticsearch_discovery_frequency = 30s

				# Enable payload compression for Elasticsearch requests.
				#
				# Default: false
				#elasticsearch_compression_enabled = true

	# Graylog will use multiple indices to store documents in. You can configured the strategy it uses to determine			# Graylog will use multiple indices to store documents in. You can configured the strategy it uses to determine
	# when to rotate the currently active write index.			# when to rotate the currently active write index.
	# It supports multiple rotation strategies:			# It supports multiple rotation strategies:
	# - "count" of messages per index, use elasticsearch_max_docs_per_index below to configure			# - "count" of messages per index, use elasticsearch_max_docs_per_index below to configure
	# - "size" per index, use elasticsearch_max_size_per_index below to configure			# - "size" per index, use elasticsearch_max_size_per_index below to configure
	# valid values are "count", "size" and "time", default is "count"			# valid values are "count", "size" and "time", default is "count"
				#
				# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
				# to your previous 1.x settings so they will be migrated to the database!
	rotation_strategy = count			rotation_strategy = count

	# (Approximate) maximum number of documents in an Elasticsearch index before a new index			# (Approximate) maximum number of documents in an Elasticsearch index before a new index
	# is being created, also see no_retention and elasticsearch_max_number_of_indices.			# is being created, also see no_retention and elasticsearch_max_number_of_indices.
	# Configure this if you used 'rotation_strategy = count' above.			# Configure this if you used 'rotation_strategy = count' above.
				#
				# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
				# to your previous 1.x settings so they will be migrated to the database!
	elasticsearch_max_docs_per_index = 20000000			elasticsearch_max_docs_per_index = 20000000

	# (Approximate) maximum size in bytes per Elasticsearch index on disk before a new index is being created, also see			# (Approximate) maximum size in bytes per Elasticsearch index on disk before a new index is being created, also see
	# no_retention and elasticsearch_max_number_of_indices. Default is 1GB.			# no_retention and elasticsearch_max_number_of_indices. Default is 1GB.
	# Configure this if you used 'rotation_strategy = size' above.			# Configure this if you used 'rotation_strategy = size' above.
				#
				# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
				# to your previous 1.x settings so they will be migrated to the database!
	#elasticsearch_max_size_per_index = 1073741824			#elasticsearch_max_size_per_index = 1073741824

	# (Approximate) maximum time before a new Elasticsearch index is being created, also see			# (Approximate) maximum time before a new Elasticsearch index is being created, also see
	# no_retention and elasticsearch_max_number_of_indices. Default is 1 day.			# no_retention and elasticsearch_max_number_of_indices. Default is 1 day.
	# Configure this if you used 'rotation_strategy = time' above.			# Configure this if you used 'rotation_strategy = time' above.
	# Please note that this rotation period does not look at the time specified in the received messages, but is			# Please note that this rotation period does not look at the time specified in the received messages, but is
	# using the real clock value to decide when to rotate the index!			# using the real clock value to decide when to rotate the index!
	# Specify the time using a duration and a suffix indicating which unit you want:			# Specify the time using a duration and a suffix indicating which unit you want:
	# 1w = 1 week			# 1w = 1 week
	# 1d = 1 day			# 1d = 1 day
	# 12h = 12 hours			# 12h = 12 hours
	# Permitted suffixes are: d for day, h for hour, m for minute, s for second.			# Permitted suffixes are: d for day, h for hour, m for minute, s for second.
				#
				# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
				# to your previous 1.x settings so they will be migrated to the database!
	#elasticsearch_max_time_per_index = 1d			#elasticsearch_max_time_per_index = 1d

	# Disable checking the version of Elasticsearch for being compatible with this Graylog release.			# Disable checking the version of Elasticsearch for being compatible with this Graylog release.
	# WARNING: Using Graylog with unsupported and untested versions of Elasticsearch may lead to data loss!			# WARNING: Using Graylog with unsupported and untested versions of Elasticsearch may lead to data loss!
	#elasticsearch_disable_version_check = true			#elasticsearch_disable_version_check = true

	# Disable message retention on this node, i. e. disable Elasticsearch index rotation.			# Disable message retention on this node, i. e. disable Elasticsearch index rotation.
	#no_retention = false			#no_retention = false

	# How many indices do you want to keep?			# How many indices do you want to keep?
				#
				# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
				# to your previous 1.x settings so they will be migrated to the database!
	elasticsearch_max_number_of_indices = 20			elasticsearch_max_number_of_indices = 20

	# Decide what happens with the oldest indices when the maximum number of indices is reached.			# Decide what happens with the oldest indices when the maximum number of indices is reached.
	# The following strategies are availble:			# The following strategies are availble:
	# - delete # Deletes the index completely (Default)			# - delete # Deletes the index completely (Default)
	# - close # Closes the index and hides it from the system. Can be re-opened later.			# - close # Closes the index and hides it from the system. Can be re-opened later.
				#
				# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
				# to your previous 1.x settings so they will be migrated to the database!
	retention_strategy = delete			retention_strategy = delete

	# How many Elasticsearch shards and replicas should be used per index? Note that this only applies to newly created indices.			# How many Elasticsearch shards and replicas should be used per index? Note that this only applies to newly created indices.
				# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
				# to your previous settings so they will be migrated to the database!
	elasticsearch_shards = 4			elasticsearch_shards = 4
	elasticsearch_replicas = 0			elasticsearch_replicas = 0

	# Prefix for all Elasticsearch indices and index aliases managed by Graylog.			# Prefix for all Elasticsearch indices and index aliases managed by Graylog.
	elasticsearch_index_prefix = graylog2			#
				# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
				# to your previous settings so they will be migrated to the database!
				elasticsearch_index_prefix = graylog

				# Name of the Elasticsearch index template used by Graylog to apply the mandatory index mapping.
				# Default: graylog-internal
				#
				# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
				# to your previous settings so they will be migrated to the database!
				#elasticsearch_template_name = graylog-internal

	# Do you want to allow searches with leading wildcards? This can be extremely resource hungry and should only			# Do you want to allow searches with leading wildcards? This can be extremely resource hungry and should only
	# be enabled with care. See also: https://www.graylog.org/documentation/general/queries/			# be enabled with care. See also: http://docs.graylog.org/en/2.1/pages/queries.html
	allow_leading_wildcard_searches = false			allow_leading_wildcard_searches = false

	# Do you want to allow searches to be highlighted? Depending on the size of your messages this can be memory hungry and			# Do you want to allow searches to be highlighted? Depending on the size of your messages this can be memory hungry and
	# should only be enabled after making sure your Elasticsearch cluster has enough memory.			# should only be enabled after making sure your Elasticsearch cluster has enough memory.
	allow_highlighting = false			allow_highlighting = false

	# settings to be passed to elasticsearch's client (overriding those in the provided elasticsearch_config_file)
	# all these
	# this must be the same as for your Elasticsearch cluster
	#elasticsearch_cluster_name = graylog2

	# you could also leave this out, but makes it easier to identify the graylog2 client instance
	#elasticsearch_node_name = graylog2-server

	# we don't want the graylog2 server to store any data, or be master node
	#elasticsearch_node_master = false
	#elasticsearch_node_data = false

	# use a different port if you run multiple Elasticsearch nodes on one machine
	#elasticsearch_transport_tcp_port = 9350

	# we don't need to run the embedded HTTP server here
	#elasticsearch_http_enabled = false

	#elasticsearch_discovery_zen_ping_multicast_enabled = false
	#elasticsearch_discovery_zen_ping_unicast_hosts = 192.168.1.203:9300

	# Change the following setting if you are running into problems with timeouts during Elasticsearch cluster discovery.
	# The setting is specified in milliseconds, the default is 5000ms (5 seconds).
	#elasticsearch_cluster_discovery_timeout = 5000

	# the following settings allow to change the bind addresses for the Elasticsearch client in graylog2
	# these settings are empty by default, letting Elasticsearch choose automatically,
	# override them here or in the 'elasticsearch_config_file' if you need to bind to a special address
	# refer to http://www.elasticsearch.org/guide/en/elasticsearch/reference/0.90/modules-network.html
	# for special values here
	#elasticsearch_network_host =
	#elasticsearch_network_bind_host =
	#elasticsearch_network_publish_host =

	# The total amount of time discovery will look for other Elasticsearch nodes in the cluster
	# before giving up and declaring the current node master.
	#elasticsearch_discovery_initial_state_timeout = 3s

	# Analyzer (tokenizer) to use for message and full_message field. The "standard" filter usually is a good idea.			# Analyzer (tokenizer) to use for message and full_message field. The "standard" filter usually is a good idea.
	# All supported analyzers are: standard, simple, whitespace, stop, keyword, pattern, language, snowball, custom			# All supported analyzers are: standard, simple, whitespace, stop, keyword, pattern, language, snowball, custom
	# Elasticsearch documentation: http://www.elasticsearch.org/guide/reference/index-modules/analysis/			# Elasticsearch documentation: https://www.elastic.co/guide/en/elasticsearch/reference/2.3/analysis.html
	# Note that this setting only takes effect on newly created indices.			# Note that this setting only takes effect on newly created indices.
				#
				# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
				# to your previous settings so they will be migrated to the database!
	elasticsearch_analyzer = standard			elasticsearch_analyzer = standard

				# Global request timeout for Elasticsearch requests (e. g. during search, index creation, or index time-range
				# calculations) based on a best-effort to restrict the runtime of Elasticsearch operations.
				# Default: 1m
				#elasticsearch_request_timeout = 1m

				# Global timeout for index optimization (force merge) requests.
				# Default: 1h
				#elasticsearch_index_optimization_timeout = 1h

				# Maximum number of concurrently running index optimization (force merge) jobs.
				# If you are using lots of different index sets, you might want to increase that number.
				# Default: 20
				#elasticsearch_index_optimization_jobs = 20

				# Time interval for index range information cleanups. This setting defines how often stale index range information
				# is being purged from the database.
				# Default: 1h
				#index_ranges_cleanup_interval = 1h

	# Batch size for the Elasticsearch output. This is the maximum (!) number of messages the Elasticsearch output			# Batch size for the Elasticsearch output. This is the maximum (!) number of messages the Elasticsearch output
	# module will get at once and write to Elasticsearch in a batch call. If the configured batch size has not been			# module will get at once and write to Elasticsearch in a batch call. If the configured batch size has not been
	# reached within output_flush_interval seconds, everything that is available will be flushed at once. Remember			# reached within output_flush_interval seconds, everything that is available will be flushed at once. Remember
	# that every outputbuffer processor manages its own batch and performs its own batch write calls.			# that every outputbuffer processor manages its own batch and performs its own batch write calls.
	# ("outputbuffer_processors" variable)			# ("outputbuffer_processors" variable)
	output_batch_size = 500			output_batch_size = 500

	# Flush interval (in seconds) for the Elasticsearch output. This is the maximum amount of time between two			# Flush interval (in seconds) for the Elasticsearch output. This is the maximum amount of time between two
	# batches of messages written to Elasticsearch. It is only effective at all if your minimum number of messages			# batches of messages written to Elasticsearch. It is only effective at all if your minimum number of messages
	# for this time period is less than output_batch_size * outputbuffer_processors.			# for this time period is less than output_batch_size * outputbuffer_processors.
	output_flush_interval = 1			output_flush_interval = 1

	# As stream outputs are loaded only on demand, an output which is failing to initialize will be tried over and			# As stream outputs are loaded only on demand, an output which is failing to initialize will be tried over and
	# over again. To prevent this, the following configuration options define after how many faults an output will			# over again. To prevent this, the following configuration options define after how many faults an output will
	# not be tried again for an also configurable amount of seconds.			# not be tried again for an also configurable amount of seconds.
	output_fault_count_threshold = 5			output_fault_count_threshold = 5
	output_fault_penalty_seconds = 30			output_fault_penalty_seconds = 30

	# The number of parallel running processors.			# The number of parallel running processors.
	# Raise this number if your buffers are filling up.			# Raise this number if your buffers are filling up.
	processbuffer_processors = 5			processbuffer_processors = 5
	outputbuffer_processors = 3			outputbuffer_processors = 3

				# The following settings (outputbuffer_processor_*) configure the thread pools backing each output buffer processor.
				# See https://docs.oracle.com/javase/8/docs/api/java/util/concurrent/ThreadPoolExecutor.html for technical details

				# When the number of threads is greater than the core (see outputbuffer_processor_threads_core_pool_size),
				# this is the maximum time in milliseconds that excess idle threads will wait for new tasks before terminating.
				# Default: 5000
	#outputbuffer_processor_keep_alive_time = 5000			#outputbuffer_processor_keep_alive_time = 5000

				# The number of threads to keep in the pool, even if they are idle, unless allowCoreThreadTimeOut is set
				# Default: 3
	#outputbuffer_processor_threads_core_pool_size = 3			#outputbuffer_processor_threads_core_pool_size = 3

				# The maximum number of threads to allow in the pool
				# Default: 30
	#outputbuffer_processor_threads_max_pool_size = 30			#outputbuffer_processor_threads_max_pool_size = 30

	# UDP receive buffer size for all message inputs (e. g. SyslogUDPInput).			# UDP receive buffer size for all message inputs (e. g. SyslogUDPInput).
	#udp_recvbuffer_sizes = 1048576			#udp_recvbuffer_sizes = 1048576

	# Wait strategy describing how buffer processors wait on a cursor sequence. (default: sleeping)			# Wait strategy describing how buffer processors wait on a cursor sequence. (default: sleeping)
	# Possible types:			# Possible types:
	# - yielding			# - yielding
	# Compromise between performance and CPU usage.			# Compromise between performance and CPU usage.
	# - sleeping			# - sleeping
	# Compromise between performance and CPU usage. Latency spikes can occur after quiet periods.			# Compromise between performance and CPU usage. Latency spikes can occur after quiet periods.
	# - blocking			# - blocking
	# High throughput, low latency, higher CPU usage.			# High throughput, low latency, higher CPU usage.
	# - busy_spinning			# - busy_spinning
	# Avoids syscalls which could introduce latency jitter. Best when threads can be bound to specific CPU cores.			# Avoids syscalls which could introduce latency jitter. Best when threads can be bound to specific CPU cores.
	processor_wait_strategy = blocking			processor_wait_strategy = blocking

	# Size of internal ring buffers. Raise this if raising outputbuffer_processors does not help anymore.			# Size of internal ring buffers. Raise this if raising outputbuffer_processors does not help anymore.
	# For optimum performance your LogMessage objects in the ring buffer should fit in your CPU L3 cache.			# For optimum performance your LogMessage objects in the ring buffer should fit in your CPU L3 cache.
	# Start server with --statistics flag to see buffer utilization.
	# Must be a power of 2. (512, 1024, 2048, ...)			# Must be a power of 2. (512, 1024, 2048, ...)
	ring_size = 65536			ring_size = 65536

	inputbuffer_ring_size = 65536			inputbuffer_ring_size = 65536
	inputbuffer_processors = 2			inputbuffer_processors = 2
	inputbuffer_wait_strategy = blocking			inputbuffer_wait_strategy = blocking

	# Enable the disk based message journal.			# Enable the disk based message journal.
	message_journal_enabled = true			message_journal_enabled = true

	# The directory which will be used to store the message journal. The directory must me exclusively used by Graylog and			# The directory which will be used to store the message journal. The directory must me exclusively used by Graylog and
	# must not contain any other files than the ones created by Graylog itself.			# must not contain any other files than the ones created by Graylog itself.
				#
				# ATTENTION:
				# If you create a seperate partition for the journal files and use a file system creating directories like 'lost+found'
				# in the root directory, you need to create a sub directory for your journal.
				# Otherwise Graylog will log an error message that the journal is corrupt and Graylog will not start.
	message_journal_dir = %%GRAYLOG_DATA_DIR%%/journal			message_journal_dir = %%GRAYLOG_DATA_DIR%%/journal

	# Journal hold messages before they could be written to Elasticsearch.			# Journal hold messages before they could be written to Elasticsearch.
	# For a maximum of 12 hours or 5 GB whichever happens first.			# For a maximum of 12 hours or 5 GB whichever happens first.
	# During normal operation the journal will be smaller.			# During normal operation the journal will be smaller.
	#message_journal_max_age = 12h			#message_journal_max_age = 12h
	#message_journal_max_size = 5gb			#message_journal_max_size = 5gb

	#message_journal_flush_age = 1m			#message_journal_flush_age = 1m
	#message_journal_flush_interval = 1000000			#message_journal_flush_interval = 1000000
	#message_journal_segment_age = 1h			#message_journal_segment_age = 1h
	#message_journal_segment_size = 100mb			#message_journal_segment_size = 100mb

	# Number of threads used exclusively for dispatching internal events. Default is 2.			# Number of threads used exclusively for dispatching internal events. Default is 2.
	#async_eventbus_processors = 2			#async_eventbus_processors = 2

	# EXPERIMENTAL: Dead Letters
	# Every failed indexing attempt is logged by default and made visible in the web-interface. You can enable
	# the experimental dead letters feature to write every message that was not successfully indexed into the
	# MongoDB "dead_letters" collection to make sure that you never lose a message. The actual writing of dead
	# letter should work fine already but it is not heavily tested yet and will get more features in future
	# releases.
	dead_letters_enabled = false

	# How many seconds to wait between marking node as DEAD for possible load balancers and starting the actual			# How many seconds to wait between marking node as DEAD for possible load balancers and starting the actual
	# shutdown process. Set to 0 if you have no status checking load balancers in front.			# shutdown process. Set to 0 if you have no status checking load balancers in front.
	lb_recognition_period_seconds = 3			lb_recognition_period_seconds = 3

				# Journal usage percentage that triggers requesting throttling for this server node from load balancers. The feature is
				# disabled if not set.
				#lb_throttle_threshold_percentage = 95

	# Every message is matched against the configured streams and it can happen that a stream contains rules which			# Every message is matched against the configured streams and it can happen that a stream contains rules which
	# take an unusual amount of time to run, for example if its using regular expressions that perform excessive backtracking.			# take an unusual amount of time to run, for example if its using regular expressions that perform excessive backtracking.
	# This will impact the processing of the entire server. To keep such misbehaving stream rules from impacting other			# This will impact the processing of the entire server. To keep such misbehaving stream rules from impacting other
	# streams, Graylog limits the execution time for each stream.			# streams, Graylog limits the execution time for each stream.
	# The default values are noted below, the timeout is in milliseconds.			# The default values are noted below, the timeout is in milliseconds.
	# If the stream matching for one stream took longer than the timeout value, and this happened more than "max_faults" times			# If the stream matching for one stream took longer than the timeout value, and this happened more than "max_faults" times
	# that stream is disabled and a notification is shown in the web interface.			# that stream is disabled and a notification is shown in the web interface.
	#stream_processing_timeout = 2000			#stream_processing_timeout = 2000
	#stream_processing_max_faults = 3			#stream_processing_max_faults = 3

	# Length of the interval in seconds in which the alert conditions for all streams should be checked			# Length of the interval in seconds in which the alert conditions for all streams should be checked
	# and alarms are being sent.			# and alarms are being sent.
	#alert_check_interval = 60			#alert_check_interval = 60

	# Since 0.21 the graylog2 server supports pluggable output modules. This means a single message can be written to multiple			# Since 0.21 the Graylog server supports pluggable output modules. This means a single message can be written to multiple
	# outputs. The next setting defines the timeout for a single output module, including the default output module where all			# outputs. The next setting defines the timeout for a single output module, including the default output module where all
	# messages end up.			# messages end up.
	#			#
	# Time in milliseconds to wait for all message outputs to finish writing a single message.			# Time in milliseconds to wait for all message outputs to finish writing a single message.
	#output_module_timeout = 10000			#output_module_timeout = 10000

	# Time in milliseconds after which a detected stale master node is being rechecked on startup.			# Time in milliseconds after which a detected stale master node is being rechecked on startup.
	#stale_master_timeout = 2000			#stale_master_timeout = 2000

	# Time in milliseconds which Graylog is waiting for all threads to stop on shutdown.			# Time in milliseconds which Graylog is waiting for all threads to stop on shutdown.
	#shutdown_timeout = 30000			#shutdown_timeout = 30000

	# MongoDB Configuration			# MongoDB connection string
	mongodb_useauth = false			# See https://docs.mongodb.com/manual/reference/connection-string/ for details
	#mongodb_user = grayloguser			mongodb_uri = mongodb://localhost/graylog
	#mongodb_password = 123
	mongodb_host = 127.0.0.1
	#mongodb_replica_set = localhost:27017,localhost:27018,localhost:27019
	mongodb_database = graylog2
	mongodb_port = 27017

	# Raise this according to the maximum connections your MongoDB server can handle if you encounter MongoDB connection problems.			# Authenticate against the MongoDB server
	mongodb_max_connections = 100			#mongodb_uri = mongodb://grayloguser:secret@localhost:27017/graylog

				# Use a replica set instead of a single host
				#mongodb_uri = mongodb://grayloguser:secret@localhost:27017,localhost:27018,localhost:27019/graylog

				# Increase this value according to the maximum connections your MongoDB server can handle from a single client
				# if you encounter MongoDB connection problems.
				mongodb_max_connections = 1000

	# Number of threads allowed to be blocked by MongoDB connections multiplier. Default: 5			# Number of threads allowed to be blocked by MongoDB connections multiplier. Default: 5
	# If mongodb_max_connections is 100, and mongodb_threads_allowed_to_block_multiplier is 5, then 500 threads can block. More than that and an exception will be thrown.			# If mongodb_max_connections is 100, and mongodb_threads_allowed_to_block_multiplier is 5,
	# http://api.mongodb.org/java/current/com/mongodb/MongoOptions.html#threadsAllowedToBlockForConnectionMultiplier			# then 500 threads can block. More than that and an exception will be thrown.
				# http://api.mongodb.com/java/current/com/mongodb/MongoOptions.html#threadsAllowedToBlockForConnectionMultiplier
	mongodb_threads_allowed_to_block_multiplier = 5			mongodb_threads_allowed_to_block_multiplier = 5

	# Drools Rule File (Use to rewrite incoming log messages)			# Drools Rule File (Use to rewrite incoming log messages)
	# See: https://www.graylog.org/documentation/general/rewriting/			# See: http://docs.graylog.org/en/2.1/pages/drools.html
	#rules_file = /usr/local/etc/graylog/server/rules.drl			#rules_file = /etc/graylog/server/rules.drl

	# Email transport			# Email transport
	#transport_email_enabled = false			#transport_email_enabled = false
	#transport_email_hostname = mail.example.com			#transport_email_hostname = mail.example.com
	#transport_email_port = 587			#transport_email_port = 587
	#transport_email_use_auth = true			#transport_email_use_auth = true
	#transport_email_use_tls = true			#transport_email_use_tls = true
	#transport_email_use_ssl = true			#transport_email_use_ssl = true
	#transport_email_auth_username = you@example.com			#transport_email_auth_username = you@example.com
	#transport_email_auth_password = secret			#transport_email_auth_password = secret
	#transport_email_subject_prefix = [graylog2]			#transport_email_subject_prefix = [graylog]
	#transport_email_from_email = graylog2@example.com			#transport_email_from_email = graylog@example.com

	# Specify and uncomment this if you want to include links to the stream in your stream alert mails.			# Specify and uncomment this if you want to include links to the stream in your stream alert mails.
	# This should define the fully qualified base url to your web interface exactly the same way as it is accessed by your users.			# This should define the fully qualified base url to your web interface exactly the same way as it is accessed by your users.
	#transport_email_web_interface_url = https://graylog2.example.com			#transport_email_web_interface_url = https://graylog.example.com

	# HTTP proxy for outgoing HTTP calls			# The default connect timeout for outgoing HTTP connections.
				# Values must be a positive duration (and between 1 and 2147483647 when converted to milliseconds).
				# Default: 5s
				#http_connect_timeout = 5s

				# The default read timeout for outgoing HTTP connections.
				# Values must be a positive duration (and between 1 and 2147483647 when converted to milliseconds).
				# Default: 10s
				#http_read_timeout = 10s

				# The default write timeout for outgoing HTTP connections.
				# Values must be a positive duration (and between 1 and 2147483647 when converted to milliseconds).
				# Default: 10s
				#http_write_timeout = 10s

				# HTTP proxy for outgoing HTTP connections
				# ATTENTION: If you configure a proxy, make sure to also configure the "http_non_proxy_hosts" option so internal
				# HTTP connections with other nodes does not go through the proxy.
				# Examples:
				# - http://proxy.example.com:8123
				# - http://username:password@proxy.example.com:8123
	#http_proxy_uri =			#http_proxy_uri =

				# A list of hosts that should be reached directly, bypassing the configured proxy server.
				# This is a list of patterns separated by ",". The patterns may start or end with a "*" for wildcards.
				# Any host matching one of these patterns will be reached through a direct connection instead of through a proxy.
				# Examples:
				# - localhost,127.0.0.1
				# - 10.0.,.example.com
				#http_non_proxy_hosts =

	# Disable the optimization of Elasticsearch indices after index cycling. This may take some load from Elasticsearch			# Disable the optimization of Elasticsearch indices after index cycling. This may take some load from Elasticsearch
	# on heavily used systems with large indices, but it will decrease search performance. The default is to optimize			# on heavily used systems with large indices, but it will decrease search performance. The default is to optimize
	# cycled indices.			# cycled indices.
				#
				# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
				# to your previous settings so they will be migrated to the database!
	#disable_index_optimization = true			#disable_index_optimization = true

	# Optimize the index down to <= index_optimization_max_num_segments. A higher number may take some load from Elasticsearch			# Optimize the index down to <= index_optimization_max_num_segments. A higher number may take some load from Elasticsearch
	# on heavily used systems with large indices, but it will decrease search performance. The default is 1.			# on heavily used systems with large indices, but it will decrease search performance. The default is 1.
				#
				# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
				# to your previous settings so they will be migrated to the database!
	#index_optimization_max_num_segments = 1			#index_optimization_max_num_segments = 1

	# Disable the index range calculation on all open/available indices and only calculate the range for the latest
	# index. This may speed up index cycling on systems with large indices but it might lead to wrong search results
	# in regard to the time range of the messages (i. e. messages within a certain range may not be found). The default
	# is to calculate the time range on all open/available indices.
	#disable_index_range_calculation = true

	# The threshold of the garbage collection runs. If GC runs take longer than this threshold, a system notification			# The threshold of the garbage collection runs. If GC runs take longer than this threshold, a system notification
	# will be generated to warn the administrator about possible problems with the system. Default is 1 second.			# will be generated to warn the administrator about possible problems with the system. Default is 1 second.
	#gc_warning_threshold = 1s			#gc_warning_threshold = 1s

	# Connection timeout for a configured LDAP server (e. g. ActiveDirectory) in milliseconds.			# Connection timeout for a configured LDAP server (e. g. ActiveDirectory) in milliseconds.
	#ldap_connection_timeout = 2000			#ldap_connection_timeout = 2000

	# https://github.com/bazhenov/groovy-shell-server			# Disable the use of SIGAR for collecting system stats
	#groovy_shell_enable = false			#disable_sigar = false
	#groovy_shell_port = 6789

	# Enable collection of Graylog-related metrics into MongoDB			# The default cache time for dashboard widgets. (Default: 10 seconds, minimum: 1 second)
	#enable_metrics_collection = false			#dashboard_widget_default_cache_time = 10s

	# Disable the use of SIGAR for collecting system stats			# Automatically load content packs in "content_packs_dir" on the first start of Graylog.
	disable_sigar = true			#content_packs_loader_enabled = true

				# The directory which contains content packs which should be loaded on the first start of Graylog.
				#content_packs_dir = data/contentpacks

				# A comma-separated list of content packs (files in "content_packs_dir") which should be applied on
				# the first start of Graylog.
				# Default: empty
				content_packs_auto_load = grok-patterns.json

				# For some cluster-related REST requests, the node must query all other nodes in the cluster. This is the maximum number
				# of threads available for this. Increase it, if '/cluster/*' requests take long to complete.
				# Should be rest_thread_pool_size * average_cluster_size if you have a high number of concurrent users.
				proxied_requests_thread_pool_size = 32