Changeset View
Changeset View
Standalone View
Standalone View
sys/gnu/dts/mips/Y1.dtsi
- This file was copied to sys/gnu/dts/mips/PSG1218.dtsi.
| #include "mt7620a.dtsi" | #include "mt7620a.dtsi" | ||||
| #include <dt-bindings/gpio/gpio.h> | |||||
| #include <dt-bindings/input/input.h> | |||||
| / { | / { | ||||
| compatible = "lenovo,newifi-y1", "ralink,mt7620a-soc"; | |||||
| chosen { | chosen { | ||||
| bootargs = "console=ttyS0,115200"; | bootargs = "console=ttyS0,115200"; | ||||
| }; | }; | ||||
| gpio-keys-polled { | gpio-keys-polled { | ||||
| compatible = "gpio-keys-polled"; | compatible = "gpio-keys-polled"; | ||||
| #address-cells = <1>; | #address-cells = <1>; | ||||
| #size-cells = <0>; | #size-cells = <0>; | ||||
| poll-interval = <20>; | poll-interval = <20>; | ||||
| reset { | reset { | ||||
| label = "reset"; | label = "reset"; | ||||
| gpios = <&gpio0 11 1>; | gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; | ||||
| linux,code = <0x198>; | linux,code = <KEY_RESTART>; | ||||
| }; | }; | ||||
| }; | }; | ||||
| }; | }; | ||||
| &gpio0 { | &gpio0 { | ||||
| status = "okay"; | status = "okay"; | ||||
| }; | }; | ||||
| &gpio2 { | &gpio2 { | ||||
| status = "okay"; | status = "okay"; | ||||
| }; | }; | ||||
| &gpio3 { | &gpio3 { | ||||
| status = "okay"; | status = "okay"; | ||||
| }; | }; | ||||
| &spi0 { | &spi0 { | ||||
| status = "okay"; | status = "okay"; | ||||
| m25p80@0 { | m25p80@0 { | ||||
| #address-cells = <1>; | #address-cells = <1>; | ||||
| #size-cells = <1>; | #size-cells = <1>; | ||||
| compatible = "jedec,spi-nor"; | compatible = "jedec,spi-nor"; | ||||
| reg = <0>; | reg = <0>; | ||||
| linux,modalias = "m25p80", "w25q128"; | |||||
| spi-max-frequency = <10000000>; | spi-max-frequency = <10000000>; | ||||
| partition@0 { | partition@0 { | ||||
| label = "u-boot"; | label = "u-boot"; | ||||
| reg = <0x0 0x30000>; | reg = <0x0 0x30000>; | ||||
| read-only; | read-only; | ||||
| }; | }; | ||||
| Show All 27 Lines | |||||
| &pcie { | &pcie { | ||||
| status = "okay"; | status = "okay"; | ||||
| pcie-bridge { | pcie-bridge { | ||||
| mt76@0,0 { | mt76@0,0 { | ||||
| reg = <0x0000 0 0 0 0>; | reg = <0x0000 0 0 0 0>; | ||||
| device_type = "pci"; | device_type = "pci"; | ||||
| mediatek,mtd-eeprom = <&factory 0x8000>; | mediatek,mtd-eeprom = <&factory 0x8000>; | ||||
| mediatek,2ghz = <0>; | ieee80211-freq-limit = <5000000 6000000>; | ||||
| }; | }; | ||||
| }; | }; | ||||
| }; | }; | ||||
| &wmac { | &wmac { | ||||
| ralink,mtd-eeprom = <&factory 0>; | ralink,mtd-eeprom = <&factory 0>; | ||||
| pinctrl-names = "default"; | |||||
| pinctrl-0 = <&pa_pins>; | |||||
| }; | }; | ||||
| &pinctrl { | &pinctrl { | ||||
| state_default: pinctrl0 { | state_default: pinctrl0 { | ||||
| gpio { | gpio { | ||||
| ralink,group = "uartf", "wled", "nd_sd"; | ralink,group = "uartf", "wled", "nd_sd"; | ||||
| ralink,function = "gpio"; | ralink,function = "gpio"; | ||||
| }; | |||||
| pa { | |||||
| ralink,group = "pa"; | |||||
| ralink,function = "pa"; | |||||
| }; | }; | ||||
| }; | }; | ||||
| }; | }; | ||||