Differential D17955 Diff 50296 sys/gnu/dts/mips/Newifi-D1.dts

Changeset View

Standalone View

sys/gnu/dts/mips/Newifi-D1.dts

This file was copied from sys/gnu/dts/mips/ZBT-WG2626.dts.

	/dts-v1/;			/dts-v1/;

	#include "mt7621.dtsi"			#include "mt7621.dtsi"

				#include <dt-bindings/gpio/gpio.h>
				#include <dt-bindings/input/input.h>

	/ {			/ {
	compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";			compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
	model = "ZBT-WG2626";			model = "Newifi-D1";

	memory@0 {			memory@0 {
	device_type = "memory";			device_type = "memory";
	reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;			reg = <0x0 0x10000000>;
	};			};

	chosen {			chosen {
	bootargs = "console=ttyS0,115200";			bootargs = "console=ttyS0,115200";
	};			};

	palmbus: palmbus@1E000000 {			gpio-leds {
	i2c@900 {			compatible = "gpio-leds";
	compatible = "ralink,i2c-mt7621";
	reg = <0x900 0x100>;			status-red {
	#address-cells = <1>;			label = "newifi-d1:red:status";
	#size-cells = <0>;			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c_pins>;
	status = "okay";
	};			};

				status-green {
				label = "newifi-d1:green:status";
				gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
	};			};

				statys-blue {
				label = "newifi-d1:blue:status";
				gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
				};
				};

	gpio-keys-polled {			gpio-keys-polled {
	compatible = "gpio-keys-polled";			compatible = "gpio-keys-polled";
	#address-cells = <1>;			#address-cells = <1>;
	#size-cells = <0>;			#size-cells = <0>;
	poll-interval = <20>;			poll-interval = <20>;

	reset {			reset {
	label = "reset";			label = "reset";
	gpios = <&gpio0 18 1>;			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
	linux,code = <0x198>;			linux,code = <KEY_RESTART>;
	};			};
	};			};

	gpio-leds {			gpio_export {
	compatible = "gpio-leds";			compatible = "gpio-export";
				#size-cells = <0>;

	status {			usb2power {
	label = "zbt-wg2626:green:status";			gpio-export,name = "usb2power";
	gpios = <&gpio0 24 1>;			gpio-export,output = <1>;
				gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
	};			};

				usb3power {
				gpio-export,name = "usb3power";
				gpio-export,output = <1>;
				gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
	};			};
	};			};
				};

	&sdhci {			&sdhci {
	status = "okay";			status = "okay";

				pinctrl-names = "default";
				pinctrl-0 = <&sdhci_pins>;
	};			};

	&spi0 {			&spi0 {
	status = "okay";			status = "okay";

	m25p80@0 {			m25p80@0 {
	#address-cells = <1>;			#address-cells = <1>;
	#size-cells = <1>;			#size-cells = <1>;
	compatible = "jedec,spi-nor";			compatible = "jedec,spi-nor";
	reg = <0>;			reg = <0>;
	linux,modalias = "m25p80";
	spi-max-frequency = <10000000>;			spi-max-frequency = <10000000>;
				m25p,chunked-io = <32>;

	partition@0 {			partition@0 {
	label = "u-boot";			label = "u-boot";
	reg = <0x0 0x30000>;			reg = <0x0 0x30000>;
	read-only;			read-only;
	};			};

	partition@30000 {			partition@30000 {
	label = "u-boot-env";			label = "u-boot-env";
	reg = <0x30000 0x10000>;			reg = <0x30000 0x10000>;
	read-only;			read-only;
	};			};

	factory: partition@40000 {			factory: partition@40000 {
	label = "factory";			label = "factory";
	reg = <0x40000 0x10000>;			reg = <0x40000 0x10000>;
	read-only;			read-only;
	};			};

	partition@50000 {			partition@50000 {
	label = "firmware";			label = "firmware";
	reg = <0x50000 0xfb0000>;			reg = <0x50000 0x1fb0000>;
	};			};
	};			};
	};			};

	&pcie {			&pcie {
	status = "okay";			status = "okay";

	pcie0 {			pcie0 {
	mt76@0,0 {			mt76@0,0 {
	reg = <0x0000 0 0 0 0>;			reg = <0x0000 0 0 0 0>;
	device_type = "pci";			device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x8000>;			mediatek,mtd-eeprom = <&factory 0x8000>;
	mediatek,2ghz = <0>;			ieee80211-freq-limit = <5000000 6000000>;
	};			};
	};			};

	pcie1 {			pcie1 {
	mt76@1,0 {			mt76@1,0 {
	reg = <0x0000 0 0 0 0>;			reg = <0x0000 0 0 0 0>;
	device_type = "pci";			device_type = "pci";
	mediatek,mtd-eeprom = <&factory 0x0000>;			mediatek,mtd-eeprom = <&factory 0x0000>;
	mediatek,5ghz = <0>;
	};			};
	};			};
	};			};

	&ethernet {			&ethernet {
	mtd-mac-address = <&factory 0xe000>;			mtd-mac-address = <&factory 0xe000>;
	};			};

	&pinctrl {			&pinctrl {
	state_default: pinctrl0 {			state_default: pinctrl0 {
	gpio {			gpio {
	ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";			ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
	ralink,function = "gpio";			ralink,function = "gpio";
	};			};
	};			};
	};			};