Differential D17955 Diff 50296 sys/gnu/dts/mips/NBG-419N2.dts

Changeset View

Standalone View

sys/gnu/dts/mips/NBG-419N2.dts

This file was added.

				/dts-v1/;

				#include "rt3352.dtsi"

				#include <dt-bindings/gpio/gpio.h>
				#include <dt-bindings/input/input.h>

				/ {
				compatible = "zyxel,nbg-419n-v2", "ralink,rt3352-soc";
				model = "ZyXEL NBG-419N v2";

				palmbus@10000000 {
				spi@b00 {
				status = "okay";
				m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "jedec,spi-nor";
				reg = <0 0>;
				spi-max-frequency = <10000000>;

				partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
				};

				partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
				};

				factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
				};

				partition@50000 {
				label = "firmware";
				reg = <0x50000 0x7b0000>;
				};
				};
				};
				};

				gpio-leds {
				compatible = "gpio-leds";

				power {
				label = "nbg-419n2:green:power";
				gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
				};

				wps {
				label = "nbg-419n2:green:wps";
				gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
				};

				usb {
				label = "nbg-419n2:green:usb";
				gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
				};
				};

				gpio-keys-polled {
				compatible = "gpio-keys-polled";
				#address-cells = <1>;
				#size-cells = <0>;
				poll-interval = <20>;
				reset {
				label = "reset";
				gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
				linux,code = <KEY_RESTART>;
				};
				wps {
				label = "wps";
				gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
				linux,code = <KEY_WPS_BUTTON>;
				};
				rfkill {
				label = "rfkill";
				linux,input-type = <EV_SW>;
				gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
				linux,code = <KEY_RFKILL>;
				};
				};

				};

				&pinctrl {
				state_default: pinctrl0 {
				gpio {
				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
				ralink,function = "gpio";
				};
				};
				};

				&ethernet {
				mtd-mac-address = <&factory 0x28>;
				};

				&esw {
				mediatek,portmap = <0x2f>;
				};

				&wmac {
				ralink,mtd-eeprom = <&factory 0>;
				};

				&ehci {
				status = "okay";
				};

				&ohci {
				status = "okay";
				};