Changeset View

Standalone View

/dts-v1/;		/dts-v1/;

#include "rt3050.dtsi"		#include "rt3050.dtsi"

		#include <dt-bindings/gpio/gpio.h>
		#include <dt-bindings/input/input.h>

/ {		/ {
compatible = "IP2202", "ralink,rt3052-soc";		compatible = "poray,ip2202", "ralink,rt3052-soc";
model = "Poray IP2202";		model = "Poray IP2202";

cfi@1f000000 {		cfi@1f000000 {
compatible = "cfi-flash";		compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;		reg = <0x1f000000 0x800000>;
bank-width = <2>;		bank-width = <2>;
device-width = <2>;		device-width = <2>;
#address-cells = <1>;		#address-cells = <1>;
Show All 23 Lines	cfi@1f000000 {
};		};
};		};

gpio-leds {		gpio-leds {
compatible = "gpio-leds";		compatible = "gpio-leds";

run {		run {
label = "ip2202:green:run";		label = "ip2202:green:run";
gpios = <&gpio0 9 1>;		gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};		};

net {		net {
label = "ip2202:amber:net";		label = "ip2202:amber:net";
gpios = <&gpio0 13 1>;		gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};		};
};		};

gpio-keys-polled {		gpio-keys-polled {
compatible = "gpio-keys-polled";		compatible = "gpio-keys-polled";
#address-cells = <1>;		#address-cells = <1>;
#size-cells = <0>;		#size-cells = <0>;
poll-interval = <20>;		poll-interval = <20>;

reset {		reset {
label = "reset";		label = "reset";
gpios = <&gpio0 10 1>;		gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <0x198>;		linux,code = <KEY_RESTART>;
};		};
};		};
};		};

&pinctrl {		&pinctrl {
state_default: pinctrl0 {		state_default: pinctrl0 {
gpio {		gpio {
ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";		ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
Show All 16 Lines