Changeset View
Changeset View
Standalone View
Standalone View
sys/gnu/dts/mips/AP-MT7621A-V60.dts
- This file was added.
/dts-v1/; | |||||
#include "mt7621.dtsi" | |||||
/ { | |||||
compatible = "mediatek,ap-mt7621a-v60", "mediatek,mt7621-soc"; | |||||
model = "Mediatek AP-MT7621A-V60 EVB"; | |||||
memory@0 { | |||||
device_type = "memory"; | |||||
reg = <0x0 0x8000000>; | |||||
}; | |||||
chosen { | |||||
bootargs = "console=ttyS0,57600"; | |||||
}; | |||||
sound { | |||||
compatible = "simple-audio-card"; | |||||
simple-audio-card,name = "Audio-I2S"; | |||||
simple-audio-card,format = "i2s"; | |||||
simple-audio-card,bitclock-master = <&dailink0_master>; | |||||
simple-audio-card,frame-master = <&dailink0_master>; | |||||
simple-audio-card,widgets = | |||||
"Microphone", "Microphone Jack", | |||||
"Headphone", "Headphone Jack"; | |||||
simple-audio-card,routing = | |||||
"LINPUT1", "Microphone Jack", | |||||
"RINPUT1", "Microphone Jack", | |||||
"Headphone Jack", "HP_L", | |||||
"Headphone Jack", "HP_R"; | |||||
simple-audio-card,mclk-fs = <256>; | |||||
simple-audio-card,cpu { | |||||
sound-dai = <&i2s>; | |||||
}; | |||||
dailink0_master: simple-audio-card,codec { | |||||
sound-dai = <&codec>; | |||||
}; | |||||
}; | |||||
}; | |||||
&pinctrl { | |||||
state_default: pinctrl0 { | |||||
gpio { | |||||
ralink,group = "uart2", "rgmii2"; | |||||
ralink,function = "gpio"; | |||||
}; | |||||
}; | |||||
i2s_pins: i2s { | |||||
i2s { | |||||
ralink,group = "uart3"; | |||||
ralink,function = "i2s"; | |||||
}; | |||||
}; | |||||
}; | |||||
&i2c { | |||||
status = "okay"; | |||||
codec: wm8960@1a { | |||||
#sound-dai-cells = <0>; | |||||
compatible = "wlf,wm8960"; | |||||
reg = <0x1a>; | |||||
wlf,shared-lrclk; | |||||
}; | |||||
}; | |||||
&gdma { | |||||
status = "okay"; | |||||
}; | |||||
&i2s { | |||||
#sound-dai-cells = <0>; | |||||
status = "okay"; | |||||
pinctrl-names = "default"; | |||||
pinctrl-0 = <&i2s_pins>; | |||||
}; | |||||
&spi0 { | |||||
status = "okay"; | |||||
mx25l6405d@0 { | |||||
#address-cells = <1>; | |||||
#size-cells = <1>; | |||||
compatible = "mx25l6405d","jedec,spi-nor"; | |||||
reg = <0 0>; | |||||
spi-max-frequency = <10000000>; | |||||
m25p,chunked-io = <32>; | |||||
partition@0 { | |||||
label = "u-boot"; | |||||
reg = <0x0 0x30000>; | |||||
read-only; | |||||
}; | |||||
partition@30000 { | |||||
label = "u-boot-env"; | |||||
reg = <0x30000 0x10000>; | |||||
read-only; | |||||
}; | |||||
factory: partition@40000 { | |||||
label = "factory"; | |||||
reg = <0x40000 0x10000>; | |||||
read-only; | |||||
}; | |||||
partition@50000 { | |||||
label = "firmware"; | |||||
reg = <0x50000 0x7b0000>; | |||||
}; | |||||
}; | |||||
}; | |||||
&sdhci { | |||||
status = "okay"; | |||||
}; | |||||
ðernet { | |||||
mtd-mac-address = <&factory 0x5>; | |||||
}; | |||||
&pcie { | |||||
status = "okay"; | |||||
}; |