Differential D14630 Diff 40863 sysutils/u-boot-rpi3/Makefile

Changeset View

Standalone View

sysutils/u-boot-rpi3/Makefile

	# $FreeBSD$			# $FreeBSD$

	PORTNAME= u-boot			MAINTAINER= manu@FreeBSD.org
				manuUnsubmitted Not Done Inline Actions This should be uboot@freebsd.org but I'll change this at commit time. manu: This should be uboot@freebsd.org but I'll change this at commit time.
	PORTVERSION= 2017.01			MASTERDIR= ${.CURDIR}/../u-boot-master
	PORTREVISION= 1
	CATEGORIES= sysutils
	MASTER_SITES= ftp://ftp.denx.de/pub/u-boot/:uboot \
	LOCAL/db:bootfiles
	PKGNAMESUFFIX= -rpi3
	DISTFILES= u-boot-${PORTVERSION}.tar.bz2:uboot \
	rpi3-boot-files-2016.05.tar.bz2:bootfiles \
	rpi3-psci-monitor-master.tgz:pscimon

	MAINTAINER= db@FreeBSD.org			MODEL= rpi3
	COMMENT= Cross-build U-Boot loader for RPi3			BOARD_CONFIG= rpi_3_defconfig
				FAMILY= rpi
				UBOOT_ARCH= aarch64

	LICENSE= GPLv2			DEPENDS= ${LOCALBASE}/share/rpi-firmware/bootcode.bin:sysutils/rpi-firmware
				EXTRA_PATCHES= ${.CURDIR}/files/patch-board_raspberry_rpi_rpi.c:-p1 \
				${.CURDIR}/files/patch-configs_rpi__3__defconfig:-p1 \
				${.CURDIR}/files/patch-drivers_usb_host_dwc2.c:-p1 \
				${.CURDIR}/files/patch-drivers_video_bcm2835.c:-p1 \
				${.CURDIR}/files/patch-include_configs_rpi.h:-p1 \
				${.CURDIR}/files/patch-lib_efi__loader_efi__console.c:-p1

	BUILD_DEPENDS= aarch64-none-elf-gcc:devel/aarch64-none-elf-gcc			.include "${MASTERDIR}/Makefile"

	USE_GITHUB= nodefault
	GH_ACCOUNT= gonzoua:pscimon
	GH_PROJECT= rpi3-psci-monitor:pscimon
	GIT_TAG= 5782052
	GH_TAGNAME= ${GIT_TAG}:pscimon

	NO_ARCH= yes

	USES= gmake tar:bzip2
	SSP_UNSAFE= yes # cross-LD does not support -fstack-protector

	WRK_BOOTFILES= ${WRKDIR}/rpi3-boot-files-2016.05
	PSCI_MONITOR= rpi3-psci-monitor-${GIT_TAG}
	PSCI_DIR= ${WRKDIR}/${PSCI_MONITOR}

	U_BOOT_DIR= share/u-boot/${PORTNAME}${PKGNAMESUFFIX}
	PLIST_FILES= ${U_BOOT_DIR}/u-boot.bin \
	${U_BOOT_DIR}/README \
	${U_BOOT_DIR}/bootcode.bin \
	${U_BOOT_DIR}/fixup.dat \
	${U_BOOT_DIR}/fixup_cd.dat \
	${U_BOOT_DIR}/fixup_db.dat \
	${U_BOOT_DIR}/fixup_x.dat \
	${U_BOOT_DIR}/start.elf \
	${U_BOOT_DIR}/start_cd.elf \
	${U_BOOT_DIR}/start_db.elf \
	${U_BOOT_DIR}/start_x.elf \
	${U_BOOT_DIR}/config.txt \
	${U_BOOT_DIR}/LICENCE.broadcom \
	${U_BOOT_DIR}/armstub8.bin
	MAKE_ARGS+= ARCH=arm \
	CROSS_COMPILE=aarch64-none-elf- \
	CONFIG_EFI=y

	do-configure:
	(cd ${WRKSRC}; ${GMAKE} rpi_3_defconfig)

	do-build:
	(cd ${WRKSRC}; ${GMAKE} ${MAKE_ARGS})
	(cd ${PSCI_DIR}; ${MAKE})

	# The output of the u-boot build process is u-boot.bin. Older firmware
	# versions require a standard header, but the recent versions (our case)
	# are capable of booting u-boot.bin directly. Also copy the entire
	# contents of the bootfiles distribution (these are proprietary binary
	# files required to boot).
	# Also include the armstub8.bin needed to go SMP on RPI3
	do-install:
	${MKDIR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
	${INSTALL_DATA} ${WRKSRC}/u-boot.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/
	${INSTALL_DATA} ${DESCR} ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/README
	${INSTALL_DATA} ${WRK_BOOTFILES}/* ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}
	${INSTALL_DATA} ${PSCI_DIR}/pscimon.bin ${STAGEDIR}/${PREFIX}/${U_BOOT_DIR}/armstub8.bin

	.include <bsd.port.mk>