Changeset View

Standalone View

				/dts-v1/;

				#include "rt2880.dtsi"

				/ {
				compatible = "MZK-W300NAG", "ralink,rt2880-soc";
				model = "Planex MZK-W300NAG";

				memory@0 {
				device_type = "memory";
				reg = <0x08000000 0x1000000>;
				};

				cfi@1f000000 {
				compatible = "cfi-flash";
				reg = <0x1f000000 0x800000>;
				bank-width = <2>;
				device-width = <2>;
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
				label = "Bootloader";
				reg = <0x0 0x30000>;
				read-only;
				};

				devdata: partition@30000 {
				label = "Config";
				reg = <0x00030000 0x00010000>;
				read-only;
				};

				factory: partition@40000 {
				label = "Factory";
				reg = <0x00040000 0x00010000>;
				read-only;
				};
				kernel: partition@50000 {
				label = "kernel";
				reg = <0x00050000 0x000f0000>;
				read-only;
				};
				rootfs: partition@160000 {
				label = "rootfs";
				reg = <0x00140000 0x002a0000>;
				read-only;
				};
				cimage: partition@3e0000 {
				label = "Cimage";
				reg = <0x003e0000 0x00020000>;
				read-only;
				};
				};

				gpio-leds {
				compatible = "gpio-leds";

				status {
				label = "status";
				gpios = <&gpio0 12 0>;
				};

				};
				gpio-keys-polled {
				compatible = "gpio-keys-polled";
				#address-cells = <1>;
				#size-cells = <0>;
				poll-interval = <20>;

				reset {
				label = "reset";
				gpios = <&gpio0 10 1>;
				linux,code = <0x198>;
				};

				};

				gpioiic {
				compatible = "gpioiic";
				gpios = <&gpio0 23 0
				&gpio0 22 0>;
				gpio-names = "scl", "sda";
				};

				rtl8366rb {
				compatible = "realtek,rtl8366rb";
				};

				};

				&ethernet {
				mtd-mac-address = <&factory 0x28>;
				port-mode = "gigasw";
				};

				&wmac {
				ralink,mtd-eeprom = <&factory 0>;
				};

				&i2c {
				status = "okay";
				};