Page MenuHomeFreeBSD
Differential D12101 Diff 32374 sys/dev/e1000/e1000_82571.c

Changeset View

Standalone View

View Options

sys/dev/e1000/e1000_82571.c

Show First 20 Lines • Show All 64 Lines • ▼ Show 20 Lines
static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
static s32 e1000_led_on_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw);
static s32 e1000_setup_link_82571(struct e1000_hw *hw); static s32 e1000_setup_link_82571(struct e1000_hw *hw);
static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw); static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data); static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data);
static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw);
static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw); static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw,
bool active); bool active);
static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw,
bool active); bool active);
static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
Show All 34 Lines case e1000_82572:
phy->type = e1000_phy_igp_2; phy->type = e1000_phy_igp_2;
phy->ops.get_cfg_done = e1000_get_cfg_done_82571; phy->ops.get_cfg_done = e1000_get_cfg_done_82571;
phy->ops.get_info = e1000_get_phy_info_igp; phy->ops.get_info = e1000_get_phy_info_igp;
phy->ops.check_polarity = e1000_check_polarity_igp; phy->ops.check_polarity = e1000_check_polarity_igp;
phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp;
phy->ops.get_cable_length = e1000_get_cable_length_igp_2; phy->ops.get_cable_length = e1000_get_cable_length_igp_2;
phy->ops.read_reg = e1000_read_phy_reg_igp; phy->ops.read_reg = e1000_read_phy_reg_igp;
phy->ops.write_reg = e1000_write_phy_reg_igp; phy->ops.write_reg = e1000_write_phy_reg_igp;
phy->ops.acquire = e1000_get_hw_semaphore_82571; phy->ops.acquire = e1000_get_hw_semaphore;
phy->ops.release = e1000_put_hw_semaphore_82571; phy->ops.release = e1000_put_hw_semaphore;
break; break;
case e1000_82573: case e1000_82573:
phy->type = e1000_phy_m88; phy->type = e1000_phy_m88;
phy->ops.get_cfg_done = e1000_get_cfg_done_generic; phy->ops.get_cfg_done = e1000_get_cfg_done_generic;
phy->ops.get_info = e1000_get_phy_info_m88; phy->ops.get_info = e1000_get_phy_info_m88;
phy->ops.check_polarity = e1000_check_polarity_m88; phy->ops.check_polarity = e1000_check_polarity_m88;
phy->ops.commit = e1000_phy_sw_reset_generic; phy->ops.commit = e1000_phy_sw_reset_generic;
phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
phy->ops.get_cable_length = e1000_get_cable_length_m88; phy->ops.get_cable_length = e1000_get_cable_length_m88;
phy->ops.read_reg = e1000_read_phy_reg_m88; phy->ops.read_reg = e1000_read_phy_reg_m88;
phy->ops.write_reg = e1000_write_phy_reg_m88; phy->ops.write_reg = e1000_write_phy_reg_m88;
phy->ops.acquire = e1000_get_hw_semaphore_82571; phy->ops.acquire = e1000_get_hw_semaphore;
phy->ops.release = e1000_put_hw_semaphore_82571; phy->ops.release = e1000_put_hw_semaphore;
break; break;
case e1000_82574: case e1000_82574:
case e1000_82583: case e1000_82583:
E1000_MUTEX_INIT(&hw->dev_spec._82571.swflag_mutex);
phy->type = e1000_phy_bm; phy->type = e1000_phy_bm;
phy->ops.get_cfg_done = e1000_get_cfg_done_generic; phy->ops.get_cfg_done = e1000_get_cfg_done_generic;
phy->ops.get_info = e1000_get_phy_info_m88; phy->ops.get_info = e1000_get_phy_info_m88;
phy->ops.check_polarity = e1000_check_polarity_m88; phy->ops.check_polarity = e1000_check_polarity_m88;
phy->ops.commit = e1000_phy_sw_reset_generic; phy->ops.commit = e1000_phy_sw_reset_generic;
phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88;
phy->ops.get_cable_length = e1000_get_cable_length_m88; phy->ops.get_cable_length = e1000_get_cable_length_m88;
▲ Show 20 Lines • Show All 346 Lines • ▼ Show 20 Lines default:
return -E1000_ERR_PHY; return -E1000_ERR_PHY;
break; break;
} }
return E1000_SUCCESS; return E1000_SUCCESS;
} }
/** /**
* e1000_get_hw_semaphore_82571 - Acquire hardware semaphore * e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
erjUnsubmitted
Not Done
Inline Actions

This should be "82574" now.

erj: This should be "82574" now.
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* *
* Acquire the HW semaphore to access the PHY or NVM
**/
static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
{
u32 swsm;
s32 sw_timeout = hw->nvm.word_size + 1;
s32 fw_timeout = hw->nvm.word_size + 1;
s32 i = 0;
DEBUGFUNC("e1000_get_hw_semaphore_82571");
/* If we have timedout 3 times on trying to acquire
* the inter-port SMBI semaphore, there is old code
* operating on the other port, and it is not
* releasing SMBI. Modify the number of times that
* we try for the semaphore to interwork with this
* older code.
*/
if (hw->dev_spec._82571.smb_counter > 2)
sw_timeout = 1;
/* Get the SW semaphore */
while (i < sw_timeout) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
if (!(swsm & E1000_SWSM_SMBI))
break;
usec_delay(50);
i++;
}
if (i == sw_timeout) {
DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
hw->dev_spec._82571.smb_counter++;
}
/* Get the FW semaphore. */
for (i = 0; i < fw_timeout; i++) {
swsm = E1000_READ_REG(hw, E1000_SWSM);
E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
/* Semaphore acquired if bit latched */
if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI)
break;
usec_delay(50);
}
if (i == fw_timeout) {
/* Release semaphores */
e1000_put_hw_semaphore_82571(hw);
DEBUGOUT("Driver can't access the NVM\n");
return -E1000_ERR_NVM;
}
return E1000_SUCCESS;
}
/**
* e1000_put_hw_semaphore_82571 - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
**/
static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
{
u32 swsm;
DEBUGFUNC("e1000_put_hw_semaphore_generic");
swsm = E1000_READ_REG(hw, E1000_SWSM);
swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
E1000_WRITE_REG(hw, E1000_SWSM, swsm);
}
/**
* e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore during reset. * Acquire the HW semaphore during reset.
* *
**/ **/
static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw) static s32
e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
{ {
u32 extcnf_ctrl; u32 extcnf_ctrl;
s32 i = 0; s32 i = 0;
/* XXX assert that mutex is held */
DEBUGFUNC("e1000_get_hw_semaphore_82573"); DEBUGFUNC("e1000_get_hw_semaphore_82573");
ASSERT_CTX_LOCK_HELD(hw);
extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
do { do {
extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl); E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
break; break;
msec_delay(2); msec_delay(2);
i++; i++;
} while (i < MDIO_OWNERSHIP_TIMEOUT); } while (i < MDIO_OWNERSHIP_TIMEOUT);
if (i == MDIO_OWNERSHIP_TIMEOUT) { if (i == MDIO_OWNERSHIP_TIMEOUT) {
/* Release semaphores */ /* Release semaphores */
e1000_put_hw_semaphore_82573(hw); e1000_put_hw_semaphore_82574(hw);
DEBUGOUT("Driver can't access the PHY\n"); DEBUGOUT("Driver can't access the PHY\n");
return -E1000_ERR_PHY; return -E1000_ERR_PHY;
} }
return E1000_SUCCESS; return E1000_SUCCESS;
} }
/** /**
* e1000_put_hw_semaphore_82573 - Release hardware semaphore * e1000_put_hw_semaphore_82574 - Release hardware semaphore
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* *
* Release hardware semaphore used during reset. * Release hardware semaphore used during reset.
* *
**/ **/
static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw) static void
e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
{ {
u32 extcnf_ctrl; u32 extcnf_ctrl;
DEBUGFUNC("e1000_put_hw_semaphore_82573"); DEBUGFUNC("e1000_put_hw_semaphore_82574");
extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL); extcnf_ctrl = E1000_READ_REG(hw, E1000_EXTCNF_CTRL);
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl); E1000_WRITE_REG(hw, E1000_EXTCNF_CTRL, extcnf_ctrl);
} }
/** /**
* e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM.
*
**/
static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
{
s32 ret_val;
DEBUGFUNC("e1000_get_hw_semaphore_82574");
E1000_MUTEX_LOCK(&hw->dev_spec._82571.swflag_mutex);
ret_val = e1000_get_hw_semaphore_82573(hw);
if (ret_val)
E1000_MUTEX_UNLOCK(&hw->dev_spec._82571.swflag_mutex);
return ret_val;
}
/**
* e1000_put_hw_semaphore_82574 - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
*
**/
static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_put_hw_semaphore_82574");
e1000_put_hw_semaphore_82573(hw);
E1000_MUTEX_UNLOCK(&hw->dev_spec._82571.swflag_mutex);
}
/**
* e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* @active: TRUE to enable LPLU, FALSE to disable * @active: TRUE to enable LPLU, FALSE to disable
* *
* Sets the LPLU D0 state according to the active flag. * Sets the LPLU D0 state according to the active flag.
* LPLU will not be activated unless the * LPLU will not be activated unless the
* device autonegotiation advertisement meets standards of * device autonegotiation advertisement meets standards of
* either 10 or 10/100 or 10/100/1000 at all duplexes. * either 10 or 10/100 or 10/100/1000 at all duplexes.
▲ Show 20 Lines • Show All 54 Lines • ▼ Show 20 Lines
* hardware semaphore. * hardware semaphore.
**/ **/
static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
{ {
s32 ret_val; s32 ret_val;
DEBUGFUNC("e1000_acquire_nvm_82571"); DEBUGFUNC("e1000_acquire_nvm_82571");
ret_val = e1000_get_hw_semaphore_82571(hw); ret_val = e1000_get_hw_semaphore(hw);
if (ret_val) if (ret_val)
return ret_val; return ret_val;
switch (hw->mac.type) { switch (hw->mac.type) {
case e1000_82573: case e1000_82573:
break; break;
default: default:
ret_val = e1000_acquire_nvm_generic(hw); ret_val = e1000_acquire_nvm_generic(hw);
break; break;
} }
if (ret_val) if (ret_val)
e1000_put_hw_semaphore_82571(hw); e1000_put_hw_semaphore(hw);
return ret_val; return ret_val;
} }
/** /**
* e1000_release_nvm_82571 - Release exclusive access to EEPROM * e1000_release_nvm_82571 - Release exclusive access to EEPROM
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* *
* Stop any current commands to the EEPROM and clear the EEPROM request bit. * Stop any current commands to the EEPROM and clear the EEPROM request bit.
**/ **/
static void e1000_release_nvm_82571(struct e1000_hw *hw) static void e1000_release_nvm_82571(struct e1000_hw *hw)
{ {
DEBUGFUNC("e1000_release_nvm_82571"); DEBUGFUNC("e1000_release_nvm_82571");
e1000_release_nvm_generic(hw); e1000_release_nvm_generic(hw);
e1000_put_hw_semaphore_82571(hw); e1000_put_hw_semaphore(hw);
} }
/** /**
* e1000_write_nvm_82571 - Write to EEPROM using appropriate interface * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
* @offset: offset within the EEPROM to be written to * @offset: offset within the EEPROM to be written to
* @words: number of words to write * @words: number of words to write
* @data: 16 bit word(s) to be written to the EEPROM * @data: 16 bit word(s) to be written to the EEPROM
▲ Show 20 Lines • Show All 300 Lines • ▼ Show 20 Linesstatic s32 e1000_reset_hw_82571(struct e1000_hw *hw)
msec_delay(10); msec_delay(10);
/* Must acquire the MDIO ownership before MAC reset. /* Must acquire the MDIO ownership before MAC reset.
* Ownership defaults to firmware after a reset. * Ownership defaults to firmware after a reset.
*/ */
switch (hw->mac.type) { switch (hw->mac.type) {
case e1000_82573: case e1000_82573:
ret_val = e1000_get_hw_semaphore_82573(hw);
break;
case e1000_82574: case e1000_82574:
case e1000_82583: case e1000_82583:
ret_val = e1000_get_hw_semaphore_82574(hw); ret_val = e1000_get_hw_semaphore_82574(hw);
break; break;
default: default:
break; break;
} }
ctrl = E1000_READ_REG(hw, E1000_CTRL); ctrl = E1000_READ_REG(hw, E1000_CTRL);
DEBUGOUT("Issuing a global reset to MAC\n"); DEBUGOUT("Issuing a global reset to MAC\n");
E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
/* Must release MDIO ownership and mutex after MAC reset. */ /* Must release MDIO ownership and mutex after MAC reset. */
switch (hw->mac.type) { switch (hw->mac.type) {
case e1000_82573: case e1000_82573:
/* Release mutex only if the hw semaphore is acquired */
if (!ret_val)
e1000_put_hw_semaphore_82573(hw);
break;
case e1000_82574: case e1000_82574:
case e1000_82583: case e1000_82583:
/* Release mutex only if the hw semaphore is acquired */ /* Release mutex only if the hw semaphore is acquired */
if (!ret_val) if (!ret_val)
e1000_put_hw_semaphore_82574(hw); e1000_put_hw_semaphore_82574(hw);
break; break;
default: default:
panic("unknown mac type %x\n", hw->mac.type);
shurdUnsubmitted
Not Done
Inline Actions

Should this be a panic()?

shurd: Should this be a panic()?
shurdUnsubmitted
Not Done
Inline Actions

Well, looks non-trivial to actually handle failure cases through em_if_init() -> em_reset(), so better to fail than to carry on after knowing you're wrong.

shurd: Well, looks non-trivial to actually handle failure cases through em_if_init() -> em_reset(), so…
break; break;
} }
if (hw->nvm.type == e1000_nvm_flash_hw) { if (hw->nvm.type == e1000_nvm_flash_hw) {
usec_delay(10); usec_delay(10);
ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_EE_RST; ctrl_ext |= E1000_CTRL_EXT_EE_RST;
E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext);
▲ Show 20 Lines • Show All 900 Lines • Show Last 20 Lines