Page MenuHomeFreeBSD
Differential D1580 Diff 3299 head/sys/dev/ixgbe/if_ixv.c

Changeset View

Standalone View

View Options

head/sys/dev/ixgbe/if_ixv.c

PropertyOld ValueNew Value
svn:eol-stylenullnative
\ No newline at end of property
svn:keywordsnullFreeBSD=%H
\ No newline at end of property
svn:mime-typenulltext/plain
\ No newline at end of property
/******************************************************************************
Copyright (c) 2001-2015, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
/*$FreeBSD$*/
#ifndef IXGBE_STANDALONE_BUILD
#include "opt_inet.h"
#include "opt_inet6.h"
#endif
#include "ixgbe.h"
/*********************************************************************
* Driver version
*********************************************************************/
char ixv_driver_version[] = "1.2.5";
/*********************************************************************
* PCI Device ID Table
*
* Used by probe to select devices to load on
* Last field stores an index into ixv_strings
* Last entry must be all 0s
*
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
*********************************************************************/
static ixgbe_vendor_info_t ixv_vendor_info_array[] =
{
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_VF, 0, 0, 0},
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_VF, 0, 0, 0},
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550_VF, 0, 0, 0},
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF, 0, 0, 0},
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_VF, 0, 0, 0},
/* required last entry */
{0, 0, 0, 0, 0}
};
/*********************************************************************
* Table of branding strings
*********************************************************************/
static char *ixv_strings[] = {
"Intel(R) PRO/10GbE Virtual Function Network Driver"
sbrunoUnsubmitted
Not Done
Inline Actions

Same as earlier, should this be 10/40GBE?

sbruno: Same as earlier, should this be 10/40GBE?
jfvAuthorUnsubmitted
Not Done
Inline Actions

Are you confusing this with ixl/ixlv, or did you somehow want the 4x10 skew to
be called 40G, I think that would just lead to confusion.

jfv: Are you confusing this with ixl/ixlv, or did you somehow want the 4x10 skew to be called 40G, I…
};
/*********************************************************************
* Function prototypes
*********************************************************************/
static int ixv_probe(device_t);
static int ixv_attach(device_t);
static int ixv_detach(device_t);
static int ixv_shutdown(device_t);
static int ixv_ioctl(struct ifnet *, u_long, caddr_t);
static void ixv_init(void *);
static void ixv_init_locked(struct adapter *);
static void ixv_stop(void *);
static void ixv_media_status(struct ifnet *, struct ifmediareq *);
static int ixv_media_change(struct ifnet *);
static void ixv_identify_hardware(struct adapter *);
static int ixv_allocate_pci_resources(struct adapter *);
static int ixv_allocate_msix(struct adapter *);
static int ixv_setup_msix(struct adapter *);
static void ixv_free_pci_resources(struct adapter *);
static void ixv_local_timer(void *);
static void ixv_setup_interface(device_t, struct adapter *);
static void ixv_config_link(struct adapter *);
static void ixv_initialize_transmit_units(struct adapter *);
static void ixv_initialize_receive_units(struct adapter *);
static void ixv_enable_intr(struct adapter *);
static void ixv_disable_intr(struct adapter *);
static void ixv_set_multi(struct adapter *);
static void ixv_update_link_status(struct adapter *);
static int ixv_sysctl_debug(SYSCTL_HANDLER_ARGS);
static void ixv_set_ivar(struct adapter *, u8, u8, s8);
static void ixv_configure_ivars(struct adapter *);
static u8 * ixv_mc_array_itr(struct ixgbe_hw *, u8 **, u32 *);
static void ixv_setup_vlan_support(struct adapter *);
static void ixv_register_vlan(void *, struct ifnet *, u16);
static void ixv_unregister_vlan(void *, struct ifnet *, u16);
static void ixv_save_stats(struct adapter *);
static void ixv_init_stats(struct adapter *);
static void ixv_update_stats(struct adapter *);
static void ixv_add_stats_sysctls(struct adapter *);
/* The MSI/X Interrupt handlers */
static void ixv_msix_que(void *);
static void ixv_msix_mbx(void *);
/* Deferred interrupt tasklets */
static void ixv_handle_que(void *, int);
static void ixv_handle_mbx(void *, int);
/*********************************************************************
* FreeBSD Device Interface Entry Points
*********************************************************************/
static device_method_t ixv_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ixv_probe),
DEVMETHOD(device_attach, ixv_attach),
DEVMETHOD(device_detach, ixv_detach),
DEVMETHOD(device_shutdown, ixv_shutdown),
DEVMETHOD_END
};
static driver_t ixv_driver = {
"ixv", ixv_methods, sizeof(struct adapter),
};
devclass_t ixgbe_devclass;
DRIVER_MODULE(ixv, pci, ixv_driver, ixgbe_devclass, 0, 0);
MODULE_DEPEND(ixv, pci, 1, 1, 1);
MODULE_DEPEND(ixv, ether, 1, 1, 1);
/*
** TUNEABLE PARAMETERS:
*/
/*
** AIM: Adaptive Interrupt Moderation
** which means that the interrupt rate
** is varied over time based on the
** traffic for that interrupt vector
*/
static int ixv_enable_aim = FALSE;
TUNABLE_INT("hw.ixv.enable_aim", &ixv_enable_aim);
/* How many packets rxeof tries to clean at a time */
static int ixv_rx_process_limit = 256;
TUNABLE_INT("hw.ixv.rx_process_limit", &ixv_rx_process_limit);
/* How many packets txeof tries to clean at a time */
static int ixv_tx_process_limit = 256;
TUNABLE_INT("hw.ixv.tx_process_limit", &ixv_tx_process_limit);
/* Flow control setting, default to full */
static int ixv_flow_control = ixgbe_fc_full;
TUNABLE_INT("hw.ixv.flow_control", &ixv_flow_control);
/*
* Header split: this causes the hardware to DMA
* the header into a seperate mbuf from the payload,
* it can be a performance win in some workloads, but
* in others it actually hurts, its off by default.
*/
static int ixv_header_split = FALSE;
TUNABLE_INT("hw.ixv.hdr_split", &ixv_header_split);
/*
** Number of TX descriptors per ring,
** setting higher than RX as this seems
** the better performing choice.
*/
static int ixv_txd = DEFAULT_TXD;
TUNABLE_INT("hw.ixv.txd", &ixv_txd);
/* Number of RX descriptors per ring */
static int ixv_rxd = DEFAULT_RXD;
TUNABLE_INT("hw.ixv.rxd", &ixv_rxd);
/*
** Shadow VFTA table, this is needed because
** the real filter table gets cleared during
** a soft reset and we need to repopulate it.
*/
static u32 ixv_shadow_vfta[IXGBE_VFTA_SIZE];
/*********************************************************************
* Device identification routine
*
* ixv_probe determines if the driver should be loaded on
* adapter based on PCI vendor/device id of the adapter.
*
* return BUS_PROBE_DEFAULT on success, positive on failure
*********************************************************************/
static int
ixv_probe(device_t dev)
{
ixgbe_vendor_info_t *ent;
u16 pci_vendor_id = 0;
u16 pci_device_id = 0;
u16 pci_subvendor_id = 0;
u16 pci_subdevice_id = 0;
char adapter_name[256];
pci_vendor_id = pci_get_vendor(dev);
if (pci_vendor_id != IXGBE_INTEL_VENDOR_ID)
return (ENXIO);
pci_device_id = pci_get_device(dev);
pci_subvendor_id = pci_get_subvendor(dev);
pci_subdevice_id = pci_get_subdevice(dev);
ent = ixv_vendor_info_array;
while (ent->vendor_id != 0) {
if ((pci_vendor_id == ent->vendor_id) &&
(pci_device_id == ent->device_id) &&
((pci_subvendor_id == ent->subvendor_id) ||
(ent->subvendor_id == 0)) &&
((pci_subdevice_id == ent->subdevice_id) ||
(ent->subdevice_id == 0))) {
sprintf(adapter_name, "%s, Version - %s",
ixv_strings[ent->index],
ixv_driver_version);
device_set_desc_copy(dev, adapter_name);
return (BUS_PROBE_DEFAULT);
}
ent++;
}
return (ENXIO);
}
/*********************************************************************
* Device initialization routine
*
* The attach entry point is called when the driver is being loaded.
* This routine identifies the type of hardware, allocates all resources
* and initializes the hardware.
*
* return 0 on success, positive on failure
*********************************************************************/
static int
ixv_attach(device_t dev)
{
struct adapter *adapter;
struct ixgbe_hw *hw;
int error = 0;
INIT_DEBUGOUT("ixv_attach: begin");
/* Allocate, clear, and link in our adapter structure */
adapter = device_get_softc(dev);
adapter->dev = adapter->osdep.dev = dev;
hw = &adapter->hw;
/* Core Lock Init*/
IXGBE_CORE_LOCK_INIT(adapter, device_get_nameunit(dev));
/* SYSCTL APIs */
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "debug", CTLTYPE_INT | CTLFLAG_RW,
adapter, 0, ixv_sysctl_debug, "I", "Debug Info");
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "enable_aim", CTLTYPE_INT|CTLFLAG_RW,
&ixv_enable_aim, 1, "Interrupt Moderation");
/* Set up the timer callout */
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
/* Determine hardware revision */
ixv_identify_hardware(adapter);
/* Do base PCI setup - map BAR0 */
if (ixv_allocate_pci_resources(adapter)) {
device_printf(dev, "Allocation of PCI resources failed\n");
error = ENXIO;
goto err_out;
}
/* Do descriptor calc and sanity checks */
if (((ixv_txd * sizeof(union ixgbe_adv_tx_desc)) % DBA_ALIGN) != 0 ||
ixv_txd < MIN_TXD || ixv_txd > MAX_TXD) {
device_printf(dev, "TXD config issue, using default!\n");
adapter->num_tx_desc = DEFAULT_TXD;
} else
adapter->num_tx_desc = ixv_txd;
if (((ixv_rxd * sizeof(union ixgbe_adv_rx_desc)) % DBA_ALIGN) != 0 ||
ixv_rxd < MIN_RXD || ixv_rxd > MAX_RXD) {
device_printf(dev, "RXD config issue, using default!\n");
adapter->num_rx_desc = DEFAULT_RXD;
} else
adapter->num_rx_desc = ixv_rxd;
/* Allocate our TX/RX Queues */
if (ixgbe_allocate_queues(adapter)) {
error = ENOMEM;
goto err_out;
}
/*
** Initialize the shared code: its
** at this point the mac type is set.
*/
error = ixgbe_init_shared_code(hw);
if (error) {
device_printf(dev,"Shared Code Initialization Failure\n");
error = EIO;
goto err_late;
}
/* Setup the mailbox */
ixgbe_init_mbx_params_vf(hw);
ixgbe_reset_hw(hw);
error = ixgbe_init_hw(hw);
if (error) {
device_printf(dev,"Hardware Initialization Failure\n");
error = EIO;
goto err_late;
}
error = ixv_allocate_msix(adapter);
if (error)
goto err_late;
/* If no mac address was assigned, make a random one */
if (!ixv_check_ether_addr(hw->mac.addr)) {
u8 addr[ETHER_ADDR_LEN];
arc4rand(&addr, sizeof(addr), 0);
addr[0] &= 0xFE;
addr[0] |= 0x02;
bcopy(addr, hw->mac.addr, sizeof(addr));
}
/* Setup OS specific network interface */
ixv_setup_interface(dev, adapter);
/* Do the stats setup */
ixv_save_stats(adapter);
ixv_init_stats(adapter);
ixv_add_stats_sysctls(adapter);
/* Register for VLAN events */
adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
ixv_register_vlan, adapter, EVENTHANDLER_PRI_FIRST);
adapter->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig,
ixv_unregister_vlan, adapter, EVENTHANDLER_PRI_FIRST);
INIT_DEBUGOUT("ixv_attach: end");
return (0);
err_late:
ixgbe_free_transmit_structures(adapter);
ixgbe_free_receive_structures(adapter);
err_out:
ixv_free_pci_resources(adapter);
return (error);
}
/*********************************************************************
* Device removal routine
*
* The detach entry point is called when the driver is being removed.
* This routine stops the adapter and deallocates all the resources
* that were allocated for driver operation.
*
* return 0 on success, positive on failure
*********************************************************************/
static int
ixv_detach(device_t dev)
{
struct adapter *adapter = device_get_softc(dev);
struct ix_queue *que = adapter->queues;
INIT_DEBUGOUT("ixv_detach: begin");
/* Make sure VLANS are not using driver */
if (adapter->ifp->if_vlantrunk != NULL) {
device_printf(dev,"Vlan in use, detach first\n");
return (EBUSY);
}
IXGBE_CORE_LOCK(adapter);
ixv_stop(adapter);
IXGBE_CORE_UNLOCK(adapter);
for (int i = 0; i < adapter->num_queues; i++, que++) {
if (que->tq) {
struct tx_ring *txr = que->txr;
taskqueue_drain(que->tq, &txr->txq_task);
taskqueue_drain(que->tq, &que->que_task);
taskqueue_free(que->tq);
}
}
/* Drain the Mailbox(link) queue */
if (adapter->tq) {
taskqueue_drain(adapter->tq, &adapter->link_task);
taskqueue_free(adapter->tq);
}
/* Unregister VLAN events */
if (adapter->vlan_attach != NULL)
EVENTHANDLER_DEREGISTER(vlan_config, adapter->vlan_attach);
if (adapter->vlan_detach != NULL)
EVENTHANDLER_DEREGISTER(vlan_unconfig, adapter->vlan_detach);
ether_ifdetach(adapter->ifp);
callout_drain(&adapter->timer);
ixv_free_pci_resources(adapter);
bus_generic_detach(dev);
if_free(adapter->ifp);
ixgbe_free_transmit_structures(adapter);
ixgbe_free_receive_structures(adapter);
IXGBE_CORE_LOCK_DESTROY(adapter);
return (0);
}
/*********************************************************************
*
* Shutdown entry point
*
**********************************************************************/
static int
ixv_shutdown(device_t dev)
{
struct adapter *adapter = device_get_softc(dev);
IXGBE_CORE_LOCK(adapter);
ixv_stop(adapter);
IXGBE_CORE_UNLOCK(adapter);
return (0);
}
/*********************************************************************
* Ioctl entry point
*
* ixv_ioctl is called when the user wants to configure the
* interface.
*
* return 0 on success, positive on failure
**********************************************************************/
static int
ixv_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
{
struct adapter *adapter = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
#if defined(INET) || defined(INET6)
struct ifaddr *ifa = (struct ifaddr *) data;
bool avoid_reset = FALSE;
#endif
int error = 0;
switch (command) {
case SIOCSIFADDR:
#ifdef INET
if (ifa->ifa_addr->sa_family == AF_INET)
avoid_reset = TRUE;
#endif
#ifdef INET6
if (ifa->ifa_addr->sa_family == AF_INET6)
avoid_reset = TRUE;
#endif
#if defined(INET) || defined(INET6)
/*
** Calling init results in link renegotiation,
** so we avoid doing it when possible.
*/
if (avoid_reset) {
ifp->if_flags |= IFF_UP;
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
ixv_init(adapter);
if (!(ifp->if_flags & IFF_NOARP))
arp_ifinit(ifp, ifa);
} else
error = ether_ioctl(ifp, command, data);
break;
#endif
case SIOCSIFMTU:
IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
if (ifr->ifr_mtu > IXGBE_MAX_FRAME_SIZE - ETHER_HDR_LEN) {
error = EINVAL;
} else {
IXGBE_CORE_LOCK(adapter);
ifp->if_mtu = ifr->ifr_mtu;
adapter->max_frame_size =
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
ixv_init_locked(adapter);
IXGBE_CORE_UNLOCK(adapter);
}
break;
case SIOCSIFFLAGS:
IOCTL_DEBUGOUT("ioctl: SIOCSIFFLAGS (Set Interface Flags)");
IXGBE_CORE_LOCK(adapter);
if (ifp->if_flags & IFF_UP) {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
ixv_init_locked(adapter);
} else
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
ixv_stop(adapter);
adapter->if_flags = ifp->if_flags;
IXGBE_CORE_UNLOCK(adapter);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
IOCTL_DEBUGOUT("ioctl: SIOC(ADD|DEL)MULTI");
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
IXGBE_CORE_LOCK(adapter);
ixv_disable_intr(adapter);
ixv_set_multi(adapter);
ixv_enable_intr(adapter);
IXGBE_CORE_UNLOCK(adapter);
}
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
IOCTL_DEBUGOUT("ioctl: SIOCxIFMEDIA (Get/Set Interface Media)");
error = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
break;
case SIOCSIFCAP:
{
int mask = ifr->ifr_reqcap ^ ifp->if_capenable;
IOCTL_DEBUGOUT("ioctl: SIOCSIFCAP (Set Capabilities)");
if (mask & IFCAP_HWCSUM)
ifp->if_capenable ^= IFCAP_HWCSUM;
if (mask & IFCAP_TSO4)
ifp->if_capenable ^= IFCAP_TSO4;
if (mask & IFCAP_LRO)
ifp->if_capenable ^= IFCAP_LRO;
if (mask & IFCAP_VLAN_HWTAGGING)
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
IXGBE_CORE_LOCK(adapter);
ixv_init_locked(adapter);
IXGBE_CORE_UNLOCK(adapter);
}
VLAN_CAPABILITIES(ifp);
break;
}
default:
IOCTL_DEBUGOUT1("ioctl: UNKNOWN (0x%X)\n", (int)command);
error = ether_ioctl(ifp, command, data);
break;
}
return (error);
}
/*********************************************************************
* Init entry point
*
* This routine is used in two ways. It is used by the stack as
* init entry point in network interface structure. It is also used
* by the driver as a hw/sw initialization routine to get to a
* consistent state.
*
* return 0 on success, positive on failure
**********************************************************************/
#define IXGBE_MHADD_MFS_SHIFT 16
static void
ixv_init_locked(struct adapter *adapter)
{
struct ifnet *ifp = adapter->ifp;
device_t dev = adapter->dev;
struct ixgbe_hw *hw = &adapter->hw;
u32 mhadd, gpie;
INIT_DEBUGOUT("ixv_init: begin");
mtx_assert(&adapter->core_mtx, MA_OWNED);
hw->adapter_stopped = FALSE;
ixgbe_stop_adapter(hw);
callout_stop(&adapter->timer);
/* reprogram the RAR[0] in case user changed it. */
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
/* Get the latest mac address, User can use a LAA */
bcopy(IF_LLADDR(adapter->ifp), hw->mac.addr,
IXGBE_ETH_LENGTH_OF_ADDRESS);
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, 1);
hw->addr_ctrl.rar_used_count = 1;
/* Prepare transmit descriptors and buffers */
if (ixgbe_setup_transmit_structures(adapter)) {
device_printf(dev,"Could not setup transmit structures\n");
ixv_stop(adapter);
return;
}
ixgbe_reset_hw(hw);
ixv_initialize_transmit_units(adapter);
/* Setup Multicast table */
ixv_set_multi(adapter);
/*
** Determine the correct mbuf pool
** for doing jumbo/headersplit
*/
if (ifp->if_mtu > ETHERMTU)
adapter->rx_mbuf_sz = MJUMPAGESIZE;
else
adapter->rx_mbuf_sz = MCLBYTES;
/* Prepare receive descriptors and buffers */
if (ixgbe_setup_receive_structures(adapter)) {
device_printf(dev,"Could not setup receive structures\n");
ixv_stop(adapter);
return;
}
/* Configure RX settings */
ixv_initialize_receive_units(adapter);
/* Enable Enhanced MSIX mode */
gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
gpie |= IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_EIAME;
gpie |= IXGBE_GPIE_PBA_SUPPORT | IXGBE_GPIE_OCD;
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
/* Set the various hardware offload abilities */
ifp->if_hwassist = 0;
if (ifp->if_capenable & IFCAP_TSO4)
ifp->if_hwassist |= CSUM_TSO;
if (ifp->if_capenable & IFCAP_TXCSUM) {
ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP);
#if __FreeBSD_version >= 800000
ifp->if_hwassist |= CSUM_SCTP;
#endif
}
/* Set MTU size */
if (ifp->if_mtu > ETHERMTU) {
mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
mhadd &= ~IXGBE_MHADD_MFS_MASK;
mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
}
/* Set up VLAN offload and filter */
ixv_setup_vlan_support(adapter);
callout_reset(&adapter->timer, hz, ixv_local_timer, adapter);
/* Set up MSI/X routing */
ixv_configure_ivars(adapter);
/* Set up auto-mask */
IXGBE_WRITE_REG(hw, IXGBE_VTEIAM, IXGBE_EICS_RTX_QUEUE);
/* Set moderation on the Link interrupt */
IXGBE_WRITE_REG(hw, IXGBE_VTEITR(adapter->vector), IXGBE_LINK_ITR);
/* Stats init */
ixv_init_stats(adapter);
/* Config/Enable Link */
ixv_config_link(adapter);
/* And now turn on interrupts */
ixv_enable_intr(adapter);
/* Now inform the stack we're ready */
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
return;
}
static void
ixv_init(void *arg)
{
struct adapter *adapter = arg;
IXGBE_CORE_LOCK(adapter);
ixv_init_locked(adapter);
IXGBE_CORE_UNLOCK(adapter);
return;
}
/*
**
** MSIX Interrupt Handlers and Tasklets
**
*/
static inline void
ixv_enable_queue(struct adapter *adapter, u32 vector)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 queue = 1 << vector;
u32 mask;
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
}
static inline void
ixv_disable_queue(struct adapter *adapter, u32 vector)
{
struct ixgbe_hw *hw = &adapter->hw;
u64 queue = (u64)(1 << vector);
u32 mask;
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, mask);
}
static inline void
ixv_rearm_queues(struct adapter *adapter, u64 queues)
{
u32 mask = (IXGBE_EIMS_RTX_QUEUE & queues);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VTEICS, mask);
}
static void
ixv_handle_que(void *context, int pending)
{
struct ix_queue *que = context;
struct adapter *adapter = que->adapter;
struct tx_ring *txr = que->txr;
struct ifnet *ifp = adapter->ifp;
bool more;
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
more = ixgbe_rxeof(que);
IXGBE_TX_LOCK(txr);
ixgbe_txeof(txr);
#if __FreeBSD_version >= 800000
if (!drbr_empty(ifp, txr->br))
ixgbe_mq_start_locked(ifp, txr);
#else
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
ixgbe_start_locked(txr, ifp);
#endif
IXGBE_TX_UNLOCK(txr);
if (more) {
taskqueue_enqueue(que->tq, &que->que_task);
return;
}
}
/* Reenable this interrupt */
ixv_enable_queue(adapter, que->msix);
return;
}
/*********************************************************************
*
* MSI Queue Interrupt Service routine
*
**********************************************************************/
void
ixv_msix_que(void *arg)
{
struct ix_queue *que = arg;
struct adapter *adapter = que->adapter;
struct ifnet *ifp = adapter->ifp;
struct tx_ring *txr = que->txr;
struct rx_ring *rxr = que->rxr;
bool more;
u32 newitr = 0;
ixv_disable_queue(adapter, que->msix);
++que->irqs;
more = ixgbe_rxeof(que);
IXGBE_TX_LOCK(txr);
ixgbe_txeof(txr);
/*
** Make certain that if the stack
** has anything queued the task gets
** scheduled to handle it.
*/
#ifdef IXGBE_LEGACY_TX
if (!IFQ_DRV_IS_EMPTY(&adapter->ifp->if_snd))
ixgbe_start_locked(txr, ifp);
#else
if (!drbr_empty(adapter->ifp, txr->br))
ixgbe_mq_start_locked(ifp, txr);
#endif
IXGBE_TX_UNLOCK(txr);
/* Do AIM now? */
if (ixv_enable_aim == FALSE)
goto no_calc;
/*
** Do Adaptive Interrupt Moderation:
** - Write out last calculated setting
** - Calculate based on average size over
** the last interval.
*/
if (que->eitr_setting)
IXGBE_WRITE_REG(&adapter->hw,
IXGBE_VTEITR(que->msix),
que->eitr_setting);
que->eitr_setting = 0;
/* Idle, do nothing */
if ((txr->bytes == 0) && (rxr->bytes == 0))
goto no_calc;
if ((txr->bytes) && (txr->packets))
newitr = txr->bytes/txr->packets;
if ((rxr->bytes) && (rxr->packets))
newitr = max(newitr,
(rxr->bytes / rxr->packets));
newitr += 24; /* account for hardware frame, crc */
/* set an upper boundary */
newitr = min(newitr, 3000);
/* Be nice to the mid range */
if ((newitr > 300) && (newitr < 1200))
newitr = (newitr / 3);
else
newitr = (newitr / 2);
newitr |= newitr << 16;
/* save for next interrupt */
que->eitr_setting = newitr;
/* Reset state */
txr->bytes = 0;
txr->packets = 0;
rxr->bytes = 0;
rxr->packets = 0;
no_calc:
if (more)
taskqueue_enqueue(que->tq, &que->que_task);
else /* Reenable this interrupt */
ixv_enable_queue(adapter, que->msix);
return;
}
static void
ixv_msix_mbx(void *arg)
{
struct adapter *adapter = arg;
struct ixgbe_hw *hw = &adapter->hw;
u32 reg;
++adapter->vector_irq;
/* First get the cause */
reg = IXGBE_READ_REG(hw, IXGBE_VTEICS);
/* Clear interrupt with write */
IXGBE_WRITE_REG(hw, IXGBE_VTEICR, reg);
/* Link status change */
if (reg & IXGBE_EICR_LSC)
taskqueue_enqueue(adapter->tq, &adapter->link_task);
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, IXGBE_EIMS_OTHER);
return;
}
/*********************************************************************
*
* Media Ioctl callback
*
* This routine is called whenever the user queries the status of
* the interface using ifconfig.
*
**********************************************************************/
static void
ixv_media_status(struct ifnet * ifp, struct ifmediareq * ifmr)
{
struct adapter *adapter = ifp->if_softc;
INIT_DEBUGOUT("ixv_media_status: begin");
IXGBE_CORE_LOCK(adapter);
ixv_update_link_status(adapter);
ifmr->ifm_status = IFM_AVALID;
ifmr->ifm_active = IFM_ETHER;
if (!adapter->link_active) {
IXGBE_CORE_UNLOCK(adapter);
return;
}
ifmr->ifm_status |= IFM_ACTIVE;
switch (adapter->link_speed) {
case IXGBE_LINK_SPEED_1GB_FULL:
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
break;
case IXGBE_LINK_SPEED_10GB_FULL:
ifmr->ifm_active |= IFM_FDX;
break;
}
IXGBE_CORE_UNLOCK(adapter);
return;
}
/*********************************************************************
*
* Media Ioctl callback
*
* This routine is called when the user changes speed/duplex using
* media/mediopt option with ifconfig.
*
**********************************************************************/
static int
ixv_media_change(struct ifnet * ifp)
{
struct adapter *adapter = ifp->if_softc;
struct ifmedia *ifm = &adapter->media;
INIT_DEBUGOUT("ixv_media_change: begin");
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
return (EINVAL);
switch (IFM_SUBTYPE(ifm->ifm_media)) {
case IFM_AUTO:
break;
default:
device_printf(adapter->dev, "Only auto media type\n");
return (EINVAL);
}
return (0);
}
/*********************************************************************
* Multicast Update
*
* This routine is called whenever multicast address list is updated.
*
**********************************************************************/
#define IXGBE_RAR_ENTRIES 16
static void
ixv_set_multi(struct adapter *adapter)
{
u8 mta[MAX_NUM_MULTICAST_ADDRESSES * IXGBE_ETH_LENGTH_OF_ADDRESS];
u8 *update_ptr;
struct ifmultiaddr *ifma;
int mcnt = 0;
struct ifnet *ifp = adapter->ifp;
IOCTL_DEBUGOUT("ixv_set_multi: begin");
#if __FreeBSD_version < 800000
IF_ADDR_LOCK(ifp);
#else
if_maddr_rlock(ifp);
#endif
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
&mta[mcnt * IXGBE_ETH_LENGTH_OF_ADDRESS],
IXGBE_ETH_LENGTH_OF_ADDRESS);
mcnt++;
}
#if __FreeBSD_version < 800000
IF_ADDR_UNLOCK(ifp);
#else
if_maddr_runlock(ifp);
#endif
update_ptr = mta;
ixgbe_update_mc_addr_list(&adapter->hw,
update_ptr, mcnt, ixv_mc_array_itr, TRUE);
return;
}
/*
* This is an iterator function now needed by the multicast
* shared code. It simply feeds the shared code routine the
* addresses in the array of ixv_set_multi() one by one.
*/
static u8 *
ixv_mc_array_itr(struct ixgbe_hw *hw, u8 **update_ptr, u32 *vmdq)
{
u8 *addr = *update_ptr;
u8 *newptr;
*vmdq = 0;
newptr = addr + IXGBE_ETH_LENGTH_OF_ADDRESS;
*update_ptr = newptr;
return addr;
}
/*********************************************************************
* Timer routine
*
* This routine checks for link status,updates statistics,
* and runs the watchdog check.
*
**********************************************************************/
static void
ixv_local_timer(void *arg)
{
struct adapter *adapter = arg;
device_t dev = adapter->dev;
struct ix_queue *que = adapter->queues;
u64 queues = 0;
int hung = 0;
mtx_assert(&adapter->core_mtx, MA_OWNED);
ixv_update_link_status(adapter);
/* Stats Update */
ixv_update_stats(adapter);
/*
** Check the TX queues status
** - mark hung queues so we don't schedule on them
** - watchdog only if all queues show hung
*/
for (int i = 0; i < adapter->num_queues; i++, que++) {
/* Keep track of queues with work for soft irq */
if (que->txr->busy)
queues |= ((u64)1 << que->me);
/*
** Each time txeof runs without cleaning, but there
** are uncleaned descriptors it increments busy. If
** we get to the MAX we declare it hung.
*/
if (que->busy == IXGBE_QUEUE_HUNG) {
++hung;
/* Mark the queue as inactive */
adapter->active_queues &= ~((u64)1 << que->me);
continue;
} else {
/* Check if we've come back from hung */
if ((adapter->active_queues & ((u64)1 << que->me)) == 0)
adapter->active_queues |= ((u64)1 << que->me);
}
if (que->busy >= IXGBE_MAX_TX_BUSY) {
device_printf(dev,"Warning queue %d "
"appears to be hung!\n", i);
que->txr->busy = IXGBE_QUEUE_HUNG;
++hung;
}
}
/* Only truely watchdog if all queues show hung */
if (hung == adapter->num_queues)
goto watchdog;
else if (queues != 0) { /* Force an IRQ on queues with work */
ixv_rearm_queues(adapter, queues);
}
callout_reset(&adapter->timer, hz, ixv_local_timer, adapter);
return;
watchdog:
device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
adapter->watchdog_events++;
ixv_init_locked(adapter);
}
/*
** Note: this routine updates the OS on the link state
** the real check of the hardware only happens with
** a link interrupt.
*/
static void
ixv_update_link_status(struct adapter *adapter)
{
struct ifnet *ifp = adapter->ifp;
device_t dev = adapter->dev;
if (adapter->link_up){
if (adapter->link_active == FALSE) {
if (bootverbose)
device_printf(dev,"Link is up %d Gbps %s \n",
((adapter->link_speed == 128)? 10:1),
"Full Duplex");
adapter->link_active = TRUE;
if_link_state_change(ifp, LINK_STATE_UP);
}
} else { /* Link down */
if (adapter->link_active == TRUE) {
if (bootverbose)
device_printf(dev,"Link is Down\n");
if_link_state_change(ifp, LINK_STATE_DOWN);
adapter->link_active = FALSE;
}
}
return;
}
/*********************************************************************
*
* This routine disables all traffic on the adapter by issuing a
* global reset on the MAC and deallocates TX/RX buffers.
*
**********************************************************************/
static void
ixv_stop(void *arg)
{
struct ifnet *ifp;
struct adapter *adapter = arg;
struct ixgbe_hw *hw = &adapter->hw;
ifp = adapter->ifp;
mtx_assert(&adapter->core_mtx, MA_OWNED);
INIT_DEBUGOUT("ixv_stop: begin\n");
ixv_disable_intr(adapter);
/* Tell the stack that the interface is no longer active */
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
ixgbe_reset_hw(hw);
adapter->hw.adapter_stopped = FALSE;
ixgbe_stop_adapter(hw);
callout_stop(&adapter->timer);
/* reprogram the RAR[0] in case user changed it. */
ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
return;
}
/*********************************************************************
*
* Determine hardware revision.
*
**********************************************************************/
static void
ixv_identify_hardware(struct adapter *adapter)
{
device_t dev = adapter->dev;
struct ixgbe_hw *hw = &adapter->hw;
/*
** Make sure BUSMASTER is set, on a VM under
** KVM it may not be and will break things.
*/
pci_enable_busmaster(dev);
/* Save off the information about this board */
hw->vendor_id = pci_get_vendor(dev);
hw->device_id = pci_get_device(dev);
hw->revision_id = pci_read_config(dev, PCIR_REVID, 1);
hw->subsystem_vendor_id =
pci_read_config(dev, PCIR_SUBVEND_0, 2);
hw->subsystem_device_id =
pci_read_config(dev, PCIR_SUBDEV_0, 2);
/* We need this to determine device-specific things */
ixgbe_set_mac_type(hw);
/* Set the right number of segments */
adapter->num_segs = IXGBE_82599_SCATTER;
return;
}
/*********************************************************************
*
* Setup MSIX Interrupt resources and handlers
*
**********************************************************************/
static int
ixv_allocate_msix(struct adapter *adapter)
{
device_t dev = adapter->dev;
struct ix_queue *que = adapter->queues;
struct tx_ring *txr = adapter->tx_rings;
int error, rid, vector = 0;
for (int i = 0; i < adapter->num_queues; i++, vector++, que++, txr++) {
rid = vector + 1;
que->res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_SHAREABLE | RF_ACTIVE);
if (que->res == NULL) {
device_printf(dev,"Unable to allocate"
" bus resource: que interrupt [%d]\n", vector);
return (ENXIO);
}
/* Set the handler function */
error = bus_setup_intr(dev, que->res,
INTR_TYPE_NET | INTR_MPSAFE, NULL,
ixv_msix_que, que, &que->tag);
if (error) {
que->res = NULL;
device_printf(dev, "Failed to register QUE handler");
return (error);
}
#if __FreeBSD_version >= 800504
bus_describe_intr(dev, que->res, que->tag, "que %d", i);
#endif
que->msix = vector;
adapter->active_queues |= (u64)(1 << que->msix);
/*
** Bind the msix vector, and thus the
** ring to the corresponding cpu.
*/
if (adapter->num_queues > 1)
bus_bind_intr(dev, que->res, i);
TASK_INIT(&txr->txq_task, 0, ixgbe_deferred_mq_start, txr);
TASK_INIT(&que->que_task, 0, ixv_handle_que, que);
que->tq = taskqueue_create_fast("ixv_que", M_NOWAIT,
taskqueue_thread_enqueue, &que->tq);
taskqueue_start_threads(&que->tq, 1, PI_NET, "%s que",
device_get_nameunit(adapter->dev));
}
/* and Mailbox */
rid = vector + 1;
adapter->res = bus_alloc_resource_any(dev,
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
if (!adapter->res) {
device_printf(dev,"Unable to allocate"
" bus resource: MBX interrupt [%d]\n", rid);
return (ENXIO);
}
/* Set the mbx handler function */
error = bus_setup_intr(dev, adapter->res,
INTR_TYPE_NET | INTR_MPSAFE, NULL,
ixv_msix_mbx, adapter, &adapter->tag);
if (error) {
adapter->res = NULL;
device_printf(dev, "Failed to register LINK handler");
return (error);
}
#if __FreeBSD_version >= 800504
bus_describe_intr(dev, adapter->res, adapter->tag, "mbx");
#endif
adapter->vector = vector;
/* Tasklets for Mailbox */
TASK_INIT(&adapter->link_task, 0, ixv_handle_mbx, adapter);
adapter->tq = taskqueue_create_fast("ixv_mbx", M_NOWAIT,
taskqueue_thread_enqueue, &adapter->tq);
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s mbxq",
device_get_nameunit(adapter->dev));
/*
** Due to a broken design QEMU will fail to properly
** enable the guest for MSIX unless the vectors in
** the table are all set up, so we must rewrite the
** ENABLE in the MSIX control register again at this
** point to cause it to successfully initialize us.
*/
if (adapter->hw.mac.type == ixgbe_mac_82599_vf) {
int msix_ctrl;
pci_find_cap(dev, PCIY_MSIX, &rid);
rid += PCIR_MSIX_CTRL;
msix_ctrl = pci_read_config(dev, rid, 2);
msix_ctrl |= PCIM_MSIXCTRL_MSIX_ENABLE;
pci_write_config(dev, rid, msix_ctrl, 2);
}
return (0);
}
/*
* Setup MSIX resources, note that the VF
* device MUST use MSIX, there is no fallback.
*/
static int
ixv_setup_msix(struct adapter *adapter)
{
device_t dev = adapter->dev;
int rid, want;
/* First try MSI/X */
rid = PCIR_BAR(3);
adapter->msix_mem = bus_alloc_resource_any(dev,
SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (adapter->msix_mem == NULL) {
device_printf(adapter->dev,
"Unable to map MSIX table \n");
goto out;
}
/*
** Want two vectors: one for a queue,
** plus an additional for mailbox.
*/
want = 2;
if ((pci_alloc_msix(dev, &want) == 0) && (want == 2)) {
device_printf(adapter->dev,
"Using MSIX interrupts with %d vectors\n", want);
return (want);
}
/* Release in case alloc was insufficient */
pci_release_msi(dev);
out:
if (adapter->msix_mem != NULL) {
bus_release_resource(dev, SYS_RES_MEMORY,
rid, adapter->msix_mem);
adapter->msix_mem = NULL;
}
device_printf(adapter->dev,"MSIX config error\n");
return (ENXIO);
}
static int
ixv_allocate_pci_resources(struct adapter *adapter)
{
int rid;
device_t dev = adapter->dev;
rid = PCIR_BAR(0);
adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&rid, RF_ACTIVE);
if (!(adapter->pci_mem)) {
device_printf(dev,"Unable to allocate bus resource: memory\n");
return (ENXIO);
}
adapter->osdep.mem_bus_space_tag =
rman_get_bustag(adapter->pci_mem);
adapter->osdep.mem_bus_space_handle =
rman_get_bushandle(adapter->pci_mem);
adapter->hw.hw_addr = (u8 *) &adapter->osdep.mem_bus_space_handle;
adapter->num_queues = 1;
adapter->hw.back = &adapter->osdep;
/*
** Now setup MSI/X, should
** return us the number of
** configured vectors.
*/
adapter->msix = ixv_setup_msix(adapter);
if (adapter->msix == ENXIO)
return (ENXIO);
else
return (0);
}
static void
ixv_free_pci_resources(struct adapter * adapter)
{
struct ix_queue *que = adapter->queues;
device_t dev = adapter->dev;
int rid, memrid;
memrid = PCIR_BAR(MSIX_82598_BAR);
/*
** There is a slight possibility of a failure mode
** in attach that will result in entering this function
** before interrupt resources have been initialized, and
** in that case we do not want to execute the loops below
** We can detect this reliably by the state of the adapter
** res pointer.
*/
if (adapter->res == NULL)
goto mem;
/*
** Release all msix queue resources:
*/
for (int i = 0; i < adapter->num_queues; i++, que++) {
rid = que->msix + 1;
if (que->tag != NULL) {
bus_teardown_intr(dev, que->res, que->tag);
que->tag = NULL;
}
if (que->res != NULL)
bus_release_resource(dev, SYS_RES_IRQ, rid, que->res);
}
/* Clean the Legacy or Link interrupt last */
if (adapter->vector) /* we are doing MSIX */
rid = adapter->vector + 1;
else
(adapter->msix != 0) ? (rid = 1):(rid = 0);
if (adapter->tag != NULL) {
bus_teardown_intr(dev, adapter->res, adapter->tag);
adapter->tag = NULL;
}
if (adapter->res != NULL)
bus_release_resource(dev, SYS_RES_IRQ, rid, adapter->res);
mem:
if (adapter->msix)
pci_release_msi(dev);
if (adapter->msix_mem != NULL)
bus_release_resource(dev, SYS_RES_MEMORY,
memrid, adapter->msix_mem);
if (adapter->pci_mem != NULL)
bus_release_resource(dev, SYS_RES_MEMORY,
PCIR_BAR(0), adapter->pci_mem);
return;
}
/*********************************************************************
*
* Setup networking device structure and register an interface.
*
**********************************************************************/
static void
ixv_setup_interface(device_t dev, struct adapter *adapter)
{
struct ifnet *ifp;
INIT_DEBUGOUT("ixv_setup_interface: begin");
ifp = adapter->ifp = if_alloc(IFT_ETHER);
if (ifp == NULL)
panic("%s: can not if_alloc()\n", device_get_nameunit(dev));
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_baudrate = 1000000000;
ifp->if_init = ixv_init;
ifp->if_softc = adapter;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = ixv_ioctl;
#if __FreeBSD_version >= 800000
ifp->if_transmit = ixgbe_mq_start;
ifp->if_qflush = ixgbe_qflush;
#else
ifp->if_start = ixgbe_start;
#endif
ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 2;
ether_ifattach(ifp, adapter->hw.mac.addr);
adapter->max_frame_size =
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
/*
* Tell the upper layer(s) we support long frames.
*/
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_TSO4 | IFCAP_VLAN_HWCSUM;
ifp->if_capabilities |= IFCAP_JUMBO_MTU;
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING
| IFCAP_VLAN_HWTSO
| IFCAP_VLAN_MTU;
ifp->if_capabilities |= IFCAP_LRO;
ifp->if_capenable = ifp->if_capabilities;
/*
* Specify the media types supported by this adapter and register
* callbacks to update media and link information
*/
ifmedia_init(&adapter->media, IFM_IMASK, ixv_media_change,
ixv_media_status);
ifmedia_add(&adapter->media, IFM_ETHER | IFM_FDX, 0, NULL);
ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
return;
}
static void
ixv_config_link(struct adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 autoneg, err = 0;
if (hw->mac.ops.check_link)
err = hw->mac.ops.check_link(hw, &autoneg,
&adapter->link_up, FALSE);
if (err)
goto out;
if (hw->mac.ops.setup_link)
err = hw->mac.ops.setup_link(hw,
autoneg, adapter->link_up);
out:
return;
}
/*********************************************************************
*
* Enable transmit unit.
*
**********************************************************************/
static void
ixv_initialize_transmit_units(struct adapter *adapter)
{
struct tx_ring *txr = adapter->tx_rings;
struct ixgbe_hw *hw = &adapter->hw;
for (int i = 0; i < adapter->num_queues; i++, txr++) {
u64 tdba = txr->txdma.dma_paddr;
u32 txctrl, txdctl;
/* Set WTHRESH to 8, burst writeback */
txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
txdctl |= (8 << 16);
IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), txdctl);
/* Set the HW Tx Head and Tail indices */
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VFTDH(i), 0);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VFTDT(i), 0);
/* Set Tx Tail register */
txr->tail = IXGBE_VFTDT(i);
/* Set the processing limit */
txr->process_limit = ixv_tx_process_limit;
/* Set Ring parameters */
IXGBE_WRITE_REG(hw, IXGBE_VFTDBAL(i),
(tdba & 0x00000000ffffffffULL));
IXGBE_WRITE_REG(hw, IXGBE_VFTDBAH(i), (tdba >> 32));
IXGBE_WRITE_REG(hw, IXGBE_VFTDLEN(i),
adapter->num_tx_desc *
sizeof(struct ixgbe_legacy_tx_desc));
txctrl = IXGBE_READ_REG(hw, IXGBE_VFDCA_TXCTRL(i));
txctrl &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(i), txctrl);
/* Now enable */
txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
txdctl |= IXGBE_TXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), txdctl);
}
return;
}
/*********************************************************************
*
* Setup receive registers and features.
*
**********************************************************************/
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
static void
ixv_initialize_receive_units(struct adapter *adapter)
{
struct rx_ring *rxr = adapter->rx_rings;
struct ixgbe_hw *hw = &adapter->hw;
struct ifnet *ifp = adapter->ifp;
u32 bufsz, fctrl, rxcsum, hlreg;
/* Enable broadcasts */
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
fctrl |= IXGBE_FCTRL_BAM;
fctrl |= IXGBE_FCTRL_DPF;
fctrl |= IXGBE_FCTRL_PMCF;
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
/* Set for Jumbo Frames? */
hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
if (ifp->if_mtu > ETHERMTU) {
hlreg |= IXGBE_HLREG0_JUMBOEN;
bufsz = 4096 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
} else {
hlreg &= ~IXGBE_HLREG0_JUMBOEN;
bufsz = 2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
}
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
u64 rdba = rxr->rxdma.dma_paddr;
u32 reg, rxdctl;
/* Setup the Base and Length of the Rx Descriptor Ring */
IXGBE_WRITE_REG(hw, IXGBE_VFRDBAL(i),
(rdba & 0x00000000ffffffffULL));
IXGBE_WRITE_REG(hw, IXGBE_VFRDBAH(i),
(rdba >> 32));
IXGBE_WRITE_REG(hw, IXGBE_VFRDLEN(i),
adapter->num_rx_desc * sizeof(union ixgbe_adv_rx_desc));
/* Set up the SRRCTL register */
reg = IXGBE_READ_REG(hw, IXGBE_VFSRRCTL(i));
reg &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
reg &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
reg |= bufsz;
reg |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(i), reg);
/* Setup the HW Rx Head and Tail Descriptor Pointers */
IXGBE_WRITE_REG(hw, IXGBE_VFRDH(rxr->me), 0);
IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rxr->me),
adapter->num_rx_desc - 1);
/* Set the processing limit */
rxr->process_limit = ixv_rx_process_limit;
/* Set Rx Tail register */
rxr->tail = IXGBE_VFRDT(rxr->me);
/* Do the queue enabling last */
rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
rxdctl |= IXGBE_RXDCTL_ENABLE;
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), rxdctl);
for (int k = 0; k < 10; k++) {
if (IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i)) &
IXGBE_RXDCTL_ENABLE)
break;
else
msec_delay(1);
}
wmb();
}
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
if (ifp->if_capenable & IFCAP_RXCSUM)
rxcsum |= IXGBE_RXCSUM_PCSD;
if (!(rxcsum & IXGBE_RXCSUM_PCSD))
rxcsum |= IXGBE_RXCSUM_IPPCSE;
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
return;
}
static void
ixv_setup_vlan_support(struct adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 ctrl, vid, vfta, retry;
/*
** We get here thru init_locked, meaning
** a soft reset, this has already cleared
** the VFTA and other state, so if there
** have been no vlan's registered do nothing.
*/
if (adapter->num_vlans == 0)
return;
/* Enable the queues */
for (int i = 0; i < adapter->num_queues; i++) {
ctrl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
ctrl |= IXGBE_RXDCTL_VME;
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), ctrl);
}
/*
** A soft reset zero's out the VFTA, so
** we need to repopulate it now.
*/
for (int i = 0; i < IXGBE_VFTA_SIZE; i++) {
if (ixv_shadow_vfta[i] == 0)
continue;
vfta = ixv_shadow_vfta[i];
/*
** Reconstruct the vlan id's
** based on the bits set in each
** of the array ints.
*/
for ( int j = 0; j < 32; j++) {
retry = 0;
if ((vfta & (1 << j)) == 0)
continue;
vid = (i * 32) + j;
/* Call the shared code mailbox routine */
while (ixgbe_set_vfta(hw, vid, 0, TRUE)) {
if (++retry > 5)
break;
}
}
}
}
/*
** This routine is run via an vlan config EVENT,
** it enables us to use the HW Filter table since
** we can get the vlan id. This just creates the
** entry in the soft version of the VFTA, init will
** repopulate the real table.
*/
static void
ixv_register_vlan(void *arg, struct ifnet *ifp, u16 vtag)
{
struct adapter *adapter = ifp->if_softc;
u16 index, bit;
if (ifp->if_softc != arg) /* Not our event */
return;
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
return;
IXGBE_CORE_LOCK(adapter);
index = (vtag >> 5) & 0x7F;
bit = vtag & 0x1F;
ixv_shadow_vfta[index] |= (1 << bit);
++adapter->num_vlans;
/* Re-init to load the changes */
ixv_init_locked(adapter);
IXGBE_CORE_UNLOCK(adapter);
}
/*
** This routine is run via an vlan
** unconfig EVENT, remove our entry
** in the soft vfta.
*/
static void
ixv_unregister_vlan(void *arg, struct ifnet *ifp, u16 vtag)
{
struct adapter *adapter = ifp->if_softc;
u16 index, bit;
if (ifp->if_softc != arg)
return;
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
return;
IXGBE_CORE_LOCK(adapter);
index = (vtag >> 5) & 0x7F;
bit = vtag & 0x1F;
ixv_shadow_vfta[index] &= ~(1 << bit);
--adapter->num_vlans;
/* Re-init to load the changes */
ixv_init_locked(adapter);
IXGBE_CORE_UNLOCK(adapter);
}
static void
ixv_enable_intr(struct adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct ix_queue *que = adapter->queues;
u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
mask = IXGBE_EIMS_ENABLE_MASK;
mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
IXGBE_WRITE_REG(hw, IXGBE_VTEIAC, mask);
for (int i = 0; i < adapter->num_queues; i++, que++)
ixv_enable_queue(adapter, que->msix);
IXGBE_WRITE_FLUSH(hw);
return;
}
static void
ixv_disable_intr(struct adapter *adapter)
{
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VTEIAC, 0);
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VTEIMC, ~0);
IXGBE_WRITE_FLUSH(&adapter->hw);
return;
}
/*
** Setup the correct IVAR register for a particular MSIX interrupt
** - entry is the register array entry
** - vector is the MSIX vector for this queue
** - type is RX/TX/MISC
*/
static void
ixv_set_ivar(struct adapter *adapter, u8 entry, u8 vector, s8 type)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 ivar, index;
vector |= IXGBE_IVAR_ALLOC_VAL;
if (type == -1) { /* MISC IVAR */
ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
ivar &= ~0xFF;
ivar |= vector;
IXGBE_WRITE_REG(hw, IXGBE_VTIVAR_MISC, ivar);
} else { /* RX/TX IVARS */
index = (16 * (entry & 1)) + (8 * type);
ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR(entry >> 1));
ivar &= ~(0xFF << index);
ivar |= (vector << index);
IXGBE_WRITE_REG(hw, IXGBE_VTIVAR(entry >> 1), ivar);
}
}
static void
ixv_configure_ivars(struct adapter *adapter)
{
struct ix_queue *que = adapter->queues;
for (int i = 0; i < adapter->num_queues; i++, que++) {
/* First the RX queue entry */
ixv_set_ivar(adapter, i, que->msix, 0);
/* ... and the TX */
ixv_set_ivar(adapter, i, que->msix, 1);
/* Set an initial value in EITR */
IXGBE_WRITE_REG(&adapter->hw,
IXGBE_VTEITR(que->msix), IXV_EITR_DEFAULT);
}
/* For the mailbox interrupt */
ixv_set_ivar(adapter, 1, adapter->vector, -1);
}
/*
** Tasklet handler for MSIX MBX interrupts
** - do outside interrupt since it might sleep
*/
static void
ixv_handle_mbx(void *context, int pending)
{
struct adapter *adapter = context;
ixgbe_check_link(&adapter->hw,
&adapter->link_speed, &adapter->link_up, 0);
ixv_update_link_status(adapter);
}
/*
** The VF stats registers never have a truely virgin
** starting point, so this routine tries to make an
** artificial one, marking ground zero on attach as
** it were.
*/
static void
ixv_save_stats(struct adapter *adapter)
{
if (adapter->stats.vf.vfgprc || adapter->stats.vf.vfgptc) {
adapter->stats.vf.saved_reset_vfgprc +=
adapter->stats.vf.vfgprc - adapter->stats.vf.base_vfgprc;
adapter->stats.vf.saved_reset_vfgptc +=
adapter->stats.vf.vfgptc - adapter->stats.vf.base_vfgptc;
adapter->stats.vf.saved_reset_vfgorc +=
adapter->stats.vf.vfgorc - adapter->stats.vf.base_vfgorc;
adapter->stats.vf.saved_reset_vfgotc +=
adapter->stats.vf.vfgotc - adapter->stats.vf.base_vfgotc;
adapter->stats.vf.saved_reset_vfmprc +=
adapter->stats.vf.vfmprc - adapter->stats.vf.base_vfmprc;
}
}
static void
ixv_init_stats(struct adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
adapter->stats.vf.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
adapter->stats.vf.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
adapter->stats.vf.last_vfgorc |=
(((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
adapter->stats.vf.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
adapter->stats.vf.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
adapter->stats.vf.last_vfgotc |=
(((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
adapter->stats.vf.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
adapter->stats.vf.base_vfgprc = adapter->stats.vf.last_vfgprc;
adapter->stats.vf.base_vfgorc = adapter->stats.vf.last_vfgorc;
adapter->stats.vf.base_vfgptc = adapter->stats.vf.last_vfgptc;
adapter->stats.vf.base_vfgotc = adapter->stats.vf.last_vfgotc;
adapter->stats.vf.base_vfmprc = adapter->stats.vf.last_vfmprc;
}
#define UPDATE_STAT_32(reg, last, count) \
{ \
u32 current = IXGBE_READ_REG(hw, reg); \
if (current < last) \
count += 0x100000000LL; \
last = current; \
count &= 0xFFFFFFFF00000000LL; \
count |= current; \
}
#define UPDATE_STAT_36(lsb, msb, last, count) \
{ \
u64 cur_lsb = IXGBE_READ_REG(hw, lsb); \
u64 cur_msb = IXGBE_READ_REG(hw, msb); \
u64 current = ((cur_msb << 32) | cur_lsb); \
if (current < last) \
count += 0x1000000000LL; \
last = current; \
count &= 0xFFFFFFF000000000LL; \
count |= current; \
}
/*
** ixv_update_stats - Update the board statistics counters.
*/
void
ixv_update_stats(struct adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
UPDATE_STAT_32(IXGBE_VFGPRC, adapter->stats.vf.last_vfgprc,
adapter->stats.vf.vfgprc);
UPDATE_STAT_32(IXGBE_VFGPTC, adapter->stats.vf.last_vfgptc,
adapter->stats.vf.vfgptc);
UPDATE_STAT_36(IXGBE_VFGORC_LSB, IXGBE_VFGORC_MSB,
adapter->stats.vf.last_vfgorc, adapter->stats.vf.vfgorc);
UPDATE_STAT_36(IXGBE_VFGOTC_LSB, IXGBE_VFGOTC_MSB,
adapter->stats.vf.last_vfgotc, adapter->stats.vf.vfgotc);
UPDATE_STAT_32(IXGBE_VFMPRC, adapter->stats.vf.last_vfmprc,
adapter->stats.vf.vfmprc);
}
/*
* Add statistic sysctls for the VF.
*/
static void
ixv_add_stats_sysctls(struct adapter *adapter)
{
device_t dev = adapter->dev;
struct ix_queue *que = &adapter->queues[0];
struct tx_ring *txr = que->txr;
struct rx_ring *rxr = que->rxr;
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
struct sysctl_oid *tree = device_get_sysctl_tree(dev);
struct sysctl_oid_list *child = SYSCTL_CHILDREN(tree);
struct ixgbevf_hw_stats *stats = &adapter->stats.vf;
struct sysctl_oid *stat_node, *queue_node;
struct sysctl_oid_list *stat_list, *queue_list;
/* Driver Statistics */
SYSCTL_ADD_UQUAD(ctx, child, OID_AUTO, "dropped",
CTLFLAG_RD, &adapter->dropped_pkts,
"Driver dropped packets");
SYSCTL_ADD_UQUAD(ctx, child, OID_AUTO, "mbuf_defrag_failed",
CTLFLAG_RD, &adapter->mbuf_defrag_failed,
"m_defrag() failed");
SYSCTL_ADD_UQUAD(ctx, child, OID_AUTO, "watchdog_events",
CTLFLAG_RD, &adapter->watchdog_events,
"Watchdog timeouts");
stat_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "mac",
CTLFLAG_RD, NULL,
"VF Statistics (read from HW registers)");
stat_list = SYSCTL_CHILDREN(stat_node);
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_rcvd",
CTLFLAG_RD, &stats->vfgprc,
"Good Packets Received");
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_rcvd",
CTLFLAG_RD, &stats->vfgorc,
"Good Octets Received");
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_rcvd",
CTLFLAG_RD, &stats->vfmprc,
"Multicast Packets Received");
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_txd",
CTLFLAG_RD, &stats->vfgptc,
"Good Packets Transmitted");
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_txd",
CTLFLAG_RD, &stats->vfgotc,
"Good Octets Transmitted");
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "que",
CTLFLAG_RD, NULL,
"Queue Statistics (collected by SW)");
queue_list = SYSCTL_CHILDREN(queue_node);
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "irqs",
CTLFLAG_RD, &(que->irqs),
"IRQs on queue");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_irqs",
CTLFLAG_RD, &(rxr->rx_irq),
"RX irqs on queue");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_packets",
CTLFLAG_RD, &(rxr->rx_packets),
"RX packets");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_bytes",
CTLFLAG_RD, &(rxr->rx_bytes),
"RX bytes");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_discarded",
CTLFLAG_RD, &(rxr->rx_discarded),
"Discarded RX packets");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tx_packets",
CTLFLAG_RD, &(txr->total_packets),
"TX Packets");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tx_bytes",
CTLFLAG_RD, &(txr->tx_bytes),
"TX Bytes");
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tx_no_desc",
CTLFLAG_RD, &(txr->no_desc_avail),
"# of times not enough descriptors were available during TX");
}
/**********************************************************************
*
* This routine is called only when em_display_debug_stats is enabled.
* This routine provides a way to take a look at important statistics
* maintained by the driver and hardware.
*
**********************************************************************/
static void
ixv_print_debug_info(struct adapter *adapter)
{
device_t dev = adapter->dev;
struct ixgbe_hw *hw = &adapter->hw;
struct ix_queue *que = adapter->queues;
struct rx_ring *rxr;
struct tx_ring *txr;
struct lro_ctrl *lro;
device_printf(dev,"Error Byte Count = %u \n",
IXGBE_READ_REG(hw, IXGBE_ERRBC));
for (int i = 0; i < adapter->num_queues; i++, que++) {
txr = que->txr;
rxr = que->rxr;
lro = &rxr->lro;
device_printf(dev,"QUE(%d) IRQs Handled: %lu\n",
que->msix, (long)que->irqs);
device_printf(dev,"RX(%d) Packets Received: %lld\n",
rxr->me, (long long)rxr->rx_packets);
device_printf(dev,"RX(%d) Bytes Received: %lu\n",
rxr->me, (long)rxr->rx_bytes);
device_printf(dev,"RX(%d) LRO Queued= %d\n",
rxr->me, lro->lro_queued);
device_printf(dev,"RX(%d) LRO Flushed= %d\n",
rxr->me, lro->lro_flushed);
device_printf(dev,"TX(%d) Packets Sent: %lu\n",
txr->me, (long)txr->total_packets);
device_printf(dev,"TX(%d) NO Desc Avail: %lu\n",
txr->me, (long)txr->no_desc_avail);
}
device_printf(dev,"MBX IRQ Handled: %lu\n",
(long)adapter->vector_irq);
return;
}
static int
ixv_sysctl_debug(SYSCTL_HANDLER_ARGS)
{
int error, result;
struct adapter *adapter;
result = -1;
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
return (error);
if (result == 1) {
adapter = (struct adapter *) arg1;
ixv_print_debug_info(adapter);
}
return error;
}