Differential D10293 Diff 27328 sys/dev/ixgbe/if_bypass.c

Changeset View

Standalone View

sys/dev/ixgbe/if_bypass.c

This file was added.

				/******************************************************************************

				Copyright (c) 2001-2017, Intel Corporation
				All rights reserved.

				Redistribution and use in source and binary forms, with or without
				modification, are permitted provided that the following conditions are met:

				1. Redistributions of source code must retain the above copyright notice,
				this list of conditions and the following disclaimer.

				2. Redistributions in binary form must reproduce the above copyright
				notice, this list of conditions and the following disclaimer in the
				documentation and/or other materials provided with the distribution.

				3. Neither the name of the Intel Corporation nor the names of its
				contributors may be used to endorse or promote products derived from
				this software without specific prior written permission.

				THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
				AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
				IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
				ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
				LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
				CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
				SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
				INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
				CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
				ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
				POSSIBILITY OF SUCH DAMAGE.

				******************************************************************************/
				/$FreeBSD$/


				#include "ixgbe.h"

				/************************************************************************
				* ixgbe_bypass_mutex_enter
				*
				* Mutex support for the bypass feature. Using a dual lock
				* to facilitate a privileged access to the watchdog update
				* over other threads.
				************************************************************************/
				static void
				ixgbe_bypass_mutex_enter(struct adapter *adapter)
				{
				while (atomic_cmpset_int(&adapter->bypass.low, 0, 1) == 0)
				usec_delay(3000);
				smhUnsubmitted Not Done Inline Actions Might be nice to extract the while loop to a little helper so you can do: atomic_cmpset_int_ensure(&adapter->bypass.low, 0, 1, 3000); smh: Might be nice to extract the while loop to a little helper so you can do: ```…
				while (atomic_cmpset_int(&adapter->bypass.high, 0, 1) == 0)
				usec_delay(3000);
				return;
				} /* ixgbe_bypass_mutex_enter */

				/************************************************************************
				* ixgbe_bypass_mutex_clear
				************************************************************************/
				static void
				ixgbe_bypass_mutex_clear(struct adapter *adapter)
				{
				while (atomic_cmpset_int(&adapter->bypass.high, 1, 0) == 0)
				usec_delay(6000);
				while (atomic_cmpset_int(&adapter->bypass.low, 1, 0) == 0)
				usec_delay(6000);
				return;
				} /* ixgbe_bypass_mutex_clear */

				/************************************************************************
				* ixgbe_bypass_wd_mutex_enter
				*
				* Watchdog entry is allowed to simply grab the high priority
				************************************************************************/
				static void
				ixgbe_bypass_wd_mutex_enter(struct adapter *adapter)
				{
				while (atomic_cmpset_int(&adapter->bypass.high, 0, 1) == 0)
				usec_delay(3000);
				return;
				} /* ixgbe_bypass_wd_mutex_enter */

				/************************************************************************
				* ixgbe_bypass_wd_mutex_clear
				************************************************************************/
				static void
				ixgbe_bypass_wd_mutex_clear(struct adapter *adapter)
				{
				while (atomic_cmpset_int(&adapter->bypass.high, 1, 0) == 0)
				usec_delay(6000);
				return;
				} /* ixgbe_bypass_wd_mutex_clear */

				/************************************************************************
				* ixgbe_get_bypass_time
				************************************************************************/
				static void
				ixgbe_get_bypass_time(u32 year, u32 sec)
				{
				struct timespec current;

				year = 1970; / time starts at 01/01/1970 */
				nanotime(&current);
				*sec = current.tv_sec;

				while(sec > SEC_THIS_YEAR(year)) {
				sec -= SEC_THIS_YEAR(year);
				(*year)++;
				}
				} /* ixgbe_get_bypass_time */

				/************************************************************************
				* ixgbe_bp_version
				*
				* Display the feature version
				************************************************************************/
				static int
				ixgbe_bp_version(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int version = 0;
				u32 cmd;

				ixgbe_bypass_mutex_enter(adapter);
				cmd = BYPASS_PAGE_CTL2 \| BYPASS_WE;
				cmd \|= (BYPASS_EEPROM_VER_ADD << BYPASS_CTL2_OFFSET_SHIFT) &
				BYPASS_CTL2_OFFSET_M;
				if ((error = hw->mac.ops.bypass_rw(hw, cmd, &version) != 0))
				goto err;
				smhUnsubmitted Not Done Inline Actions Bracing issue, I would expect this to be: if ((error = hw->mac.ops.bypass_rw(hw, cmd, &version)) != 0) smh: Bracing issue, I would expect this to be: ``` if ((error = hw->mac.ops.bypass_rw(hw, cmd…
				msec_delay(100);
				cmd &= ~BYPASS_WE;
				if ((error = hw->mac.ops.bypass_rw(hw, cmd, &version) != 0))
				goto err;
				smhUnsubmitted Not Done Inline Actions Bracing issue smh: Bracing issue
				ixgbe_bypass_mutex_clear(adapter);
				version &= BYPASS_CTL2_DATA_M;
				error = sysctl_handle_int(oidp, &version, 0, req);
				return (error);
				err:
				ixgbe_bypass_mutex_clear(adapter);
				return (error);

				} /* ixgbe_bp_version */

				/************************************************************************
				* ixgbe_bp_set_state
				*
				* Show/Set the Bypass State:
				* 1 = NORMAL
				* 2 = BYPASS
				* 3 = ISOLATE
				*
				* With no argument the state is displayed,
				* passing a value will set it.
				************************************************************************/
				static int
				ixgbe_bp_set_state(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int state = 0;

				/* Get the current state */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw,
				BYPASS_PAGE_CTL0, &state);
				ixgbe_bypass_mutex_clear(adapter);
				if (error != 0)
				return (error);
				state = (state >> BYPASS_STATUS_OFF_SHIFT) & 0x3;

				error = sysctl_handle_int(oidp, &state, 0, req);
				if ((error != 0) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions excessive bracing smh: excessive bracing

				/* Sanity check new state */
				switch (state) {
				case BYPASS_NORM:
				case BYPASS_BYPASS:
				case BYPASS_ISOLATE:
				break;
				default:
				return (EINVAL);
				}
				ixgbe_bypass_mutex_enter(adapter);
				if ((error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_MODE_OFF_M, state) != 0))
				smhUnsubmitted Not Done Inline Actions Bracing smh: Bracing
				goto out;
				/* Set AUTO back on so FW can receive events */
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_MODE_OFF_M, BYPASS_AUTO);
				out:
				ixgbe_bypass_mutex_clear(adapter);
				usec_delay(6000);
				return (error);
				smhUnsubmitted Not Done Inline Actions Why the delay? If ixgbe_bypass_mutex_clear needs time to settle then would it not be better for it to do that instead of the caller? smh: Why the delay? If ixgbe_bypass_mutex_clear needs time to settle then would it not be better for…
				} /* ixgbe_bp_set_state */

				/************************************************************************
				* The following routines control the operational
				* "rules" of the feature, what behavior will occur
				* when particular events occur.
				* Values are:
				* 0 - no change for the event (NOP)
				* 1 - go to Normal operation
				* 2 - go to Bypass operation
				* 3 - go to Isolate operation
				* Calling the entry with no argument just displays
				* the current rule setting.
				************************************************************************/

				/************************************************************************
				* ixgbe_bp_timeout
				*
				* This is to set the Rule for the watchdog,
				* not the actual watchdog timeout value.
				************************************************************************/
				static int
				ixgbe_bp_timeout(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int timeout = 0;

				/* Get the current value */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL0, &timeout);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (error);
				timeout = (timeout >> BYPASS_WDTIMEOUT_SHIFT) & 0x3;

				error = sysctl_handle_int(oidp, &timeout, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				/* Sanity check on the setting */
				switch (timeout) {
				case BYPASS_NOP:
				case BYPASS_NORM:
				case BYPASS_BYPASS:
				case BYPASS_ISOLATE:
				break;
				default:
				return (EINVAL);
				}

				/* Set the new state */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_WDTIMEOUT_M, timeout << BYPASS_WDTIMEOUT_SHIFT);
				ixgbe_bypass_mutex_clear(adapter);
				usec_delay(6000);
				return (error);
				smhUnsubmitted Not Done Inline Actions As above smh: As above
				} /* ixgbe_bp_timeout */

				/************************************************************************
				* ixgbe_bp_main_on
				************************************************************************/
				static int
				ixgbe_bp_main_on(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int main_on = 0;

				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL0, &main_on);
				main_on = (main_on >> BYPASS_MAIN_ON_SHIFT) & 0x3;
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (error);
				smhUnsubmitted Not Done Inline Actions Should this be earlier? smh: Should this be earlier?

				error = sysctl_handle_int(oidp, &main_on, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				/* Sanity check on the setting */
				switch (main_on) {
				case BYPASS_NOP:
				case BYPASS_NORM:
				case BYPASS_BYPASS:
				case BYPASS_ISOLATE:
				break;
				default:
				return (EINVAL);
				}

				/* Set the new state */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_MAIN_ON_M, main_on << BYPASS_MAIN_ON_SHIFT);
				ixgbe_bypass_mutex_clear(adapter);
				usec_delay(6000);
				return (error);
				smhUnsubmitted Not Done Inline Actions As above smh: As above
				} /* ixgbe_bp_main_on */

				/************************************************************************
				* ixgbe_bp_main_off
				************************************************************************/
				static int
				ixgbe_bp_main_off(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int main_off = 0;

				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL0, &main_off);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (error);
				main_off = (main_off >> BYPASS_MAIN_OFF_SHIFT) & 0x3;

				error = sysctl_handle_int(oidp, &main_off, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				/* Sanity check on the setting */
				switch (main_off) {
				case BYPASS_NOP:
				case BYPASS_NORM:
				case BYPASS_BYPASS:
				case BYPASS_ISOLATE:
				break;
				default:
				return (EINVAL);
				}

				/* Set the new state */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_MAIN_OFF_M, main_off << BYPASS_MAIN_OFF_SHIFT);
				ixgbe_bypass_mutex_clear(adapter);
				usec_delay(6000);
				return (error);
				smhUnsubmitted Not Done Inline Actions as above smh: as above
				} /* ixgbe_bp_main_off */

				/************************************************************************
				* ixgbe_bp_aux_on
				************************************************************************/
				static int
				ixgbe_bp_aux_on(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int aux_on = 0;

				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL0, &aux_on);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (error);
				aux_on = (aux_on >> BYPASS_AUX_ON_SHIFT) & 0x3;

				error = sysctl_handle_int(oidp, &aux_on, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				/* Sanity check on the setting */
				switch (aux_on) {
				case BYPASS_NOP:
				case BYPASS_NORM:
				case BYPASS_BYPASS:
				case BYPASS_ISOLATE:
				break;
				default:
				return (EINVAL);
				}

				/* Set the new state */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_AUX_ON_M, aux_on << BYPASS_AUX_ON_SHIFT);
				ixgbe_bypass_mutex_clear(adapter);
				usec_delay(6000);
				return (error);
				smhUnsubmitted Not Done Inline Actions as above smh: as above
				} /* ixgbe_bp_aux_on */

				/************************************************************************
				* ixgbe_bp_aux_off
				************************************************************************/
				static int
				ixgbe_bp_aux_off(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error = 0;
				static int aux_off = 0;

				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL0, &aux_off);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (error);
				aux_off = (aux_off >> BYPASS_AUX_OFF_SHIFT) & 0x3;

				error = sysctl_handle_int(oidp, &aux_off, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing
				return (error);

				/* Sanity check on the setting */
				switch (aux_off) {
				case BYPASS_NOP:
				case BYPASS_NORM:
				case BYPASS_BYPASS:
				case BYPASS_ISOLATE:
				break;
				default:
				return (EINVAL);
				}

				/* Set the new state */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0,
				BYPASS_AUX_OFF_M, aux_off << BYPASS_AUX_OFF_SHIFT);
				ixgbe_bypass_mutex_clear(adapter);
				usec_delay(6000);
				return (error);
				smhUnsubmitted Not Done Inline Actions as above smh: as above
				} /* ixgbe_bp_aux_off */

				/************************************************************************
				* ixgbe_bp_wd_set - Set the Watchdog timer value
				*
				* Valid settings are:
				* - 0 will disable the watchdog
				* - 1, 2, 3, 4, 8, 16, 32
				* - anything else is invalid and will be ignored
				************************************************************************/
				static int
				ixgbe_bp_wd_set(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				int error, tmp;
				static int timeout = 0;
				u32 mask, arg;

				/* Get the current hardware value */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL0, &tmp);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (error);
				/*
				* If armed keep the displayed value,
				* else change the display to zero.
				*/
				if ((tmp & (0x1 << BYPASS_WDT_ENABLE_SHIFT)) == 0)
				timeout = 0;

				error = sysctl_handle_int(oidp, &timeout, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				arg = 0x1 << BYPASS_WDT_ENABLE_SHIFT;
				mask = BYPASS_WDT_ENABLE_M \| BYPASS_WDT_VALUE_M;
				switch (timeout) {
				case 0: /* disables the timer */
				arg = BYPASS_PAGE_CTL0;
				mask = BYPASS_WDT_ENABLE_M;
				break;
				case 1:
				arg \|= BYPASS_WDT_1_5 << BYPASS_WDT_TIME_SHIFT;
				break;
				case 2:
				arg \|= BYPASS_WDT_2 << BYPASS_WDT_TIME_SHIFT;
				break;
				case 3:
				arg \|= BYPASS_WDT_3 << BYPASS_WDT_TIME_SHIFT;
				break;
				case 4:
				arg \|= BYPASS_WDT_4 << BYPASS_WDT_TIME_SHIFT;
				break;
				case 8:
				arg \|= BYPASS_WDT_8 << BYPASS_WDT_TIME_SHIFT;
				break;
				case 16:
				arg \|= BYPASS_WDT_16 << BYPASS_WDT_TIME_SHIFT;
				break;
				case 32:
				arg \|= BYPASS_WDT_32 << BYPASS_WDT_TIME_SHIFT;
				break;
				default:
				return (EINVAL);
				}

				/* Set the new watchdog */
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL0, mask, arg);
				ixgbe_bypass_mutex_clear(adapter);

				return (error);
				} /* ixgbe_bp_wd_set */

				/************************************************************************
				* ixgbe_bp_wd_reset - Reset the Watchdog timer
				*
				* To activate this it must be called with any argument.
				************************************************************************/
				static int
				ixgbe_bp_wd_reset(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				u32 sec, year;
				int cmd, count = 0, error = 0;
				int reset_wd = 0;

				error = sysctl_handle_int(oidp, &reset_wd, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				cmd = BYPASS_PAGE_CTL1 \| BYPASS_WE \| BYPASS_CTL1_WDT_PET;

				/* Resync the FW time while writing to CTL1 anyway */
				ixgbe_get_bypass_time(&year, &sec);

				cmd \|= (sec & BYPASS_CTL1_TIME_M) \| BYPASS_CTL1_VALID;
				cmd \|= BYPASS_CTL1_OFFTRST;

				ixgbe_bypass_wd_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rw(hw, cmd, &reset_wd);

				/* Read until it matches what we wrote, or we time out */
				do {
				if (count++ > 10) {
				error = IXGBE_BYPASS_FW_WRITE_FAILURE;
				break;
				}
				error = hw->mac.ops.bypass_rw(hw, BYPASS_PAGE_CTL1, &reset_wd);
				if (error != 0) {
				error = IXGBE_ERR_INVALID_ARGUMENT;
				break;
				}
				} while (!hw->mac.ops.bypass_valid_rd(cmd, reset_wd));

				reset_wd = 0;
				ixgbe_bypass_wd_mutex_clear(adapter);
				return (error);
				} /* ixgbe_bp_wd_reset */

				/************************************************************************
				* ixgbe_bp_log - Display the bypass log
				*
				* You must pass a non-zero arg to sysctl
				************************************************************************/
				static int
				ixgbe_bp_log(SYSCTL_HANDLER_ARGS)
				{
				struct adapter adapter = (struct adapter ) arg1;
				struct ixgbe_hw *hw = &adapter->hw;
				u32 cmd, base, head;
				u32 log_off, count = 0;
				static int status = 0;
				u8 data;
				struct ixgbe_bypass_eeprom eeprom[BYPASS_MAX_LOGS];
				int i, error = 0;

				error = sysctl_handle_int(oidp, &status, 0, req);
				if ((error) \|\| (req->newptr == NULL))
				return (error);
				smhUnsubmitted Not Done Inline Actions bracing smh: bracing

				/* Keep the log display single-threaded */
				while (atomic_cmpset_int(&adapter->bypass.log, 0, 1) == 0)
				usec_delay(3000);

				ixgbe_bypass_mutex_enter(adapter);

				/* Find Current head of the log eeprom offset */
				cmd = BYPASS_PAGE_CTL2 \| BYPASS_WE;
				cmd \|= (0x1 << BYPASS_CTL2_OFFSET_SHIFT) & BYPASS_CTL2_OFFSET_M;
				error = hw->mac.ops.bypass_rw(hw, cmd, &status);
				if (error)
				goto unlock_err;

				/* wait for the write to stick */
				msec_delay(100);

				/* Now read the results */
				cmd &= ~BYPASS_WE;
				error = hw->mac.ops.bypass_rw(hw, cmd, &status);
				if (error)
				goto unlock_err;

				ixgbe_bypass_mutex_clear(adapter);

				base = status & BYPASS_CTL2_DATA_M;
				head = (status & BYPASS_CTL2_HEAD_M) >> BYPASS_CTL2_HEAD_SHIFT;

				/* address of the first log */
				log_off = base + (head * 5);

				/* extract all the log entries */
				while (count < BYPASS_MAX_LOGS) {
				eeprom[count].logs = 0;
				eeprom[count].actions = 0;

				/* Log 5 bytes store in on u32 and a u8 */
				for (i = 0; i < 4; i++) {
				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rd_eep(hw, log_off + i,
				&data);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (EINVAL);
				eeprom[count].logs += data << (8 * i);
				}

				ixgbe_bypass_mutex_enter(adapter);
				error = hw->mac.ops.bypass_rd_eep(hw,
				log_off + i, &eeprom[count].actions);
				ixgbe_bypass_mutex_clear(adapter);
				if (error)
				return (EINVAL);

				smhUnsubmitted Not Done Inline Actions IXGBE_ERR_INVALID_ARGUMENT is used above should they be the same? smh: IXGBE_ERR_INVALID_ARGUMENT is used above should they be the same?
				/* Quit if not a unread log */
				if (!(eeprom[count].logs & BYPASS_LOG_CLEAR_M))
				break;
				smhUnsubmitted Not Done Inline Actions 0 as the value is not bool smh: == 0 as the value is not bool
				/*
				* Log looks good so store the address where it's
				* Unread Log bit is so we can clear it after safely
				* pulling out all of the log data.
				*/
				eeprom[count].clear_off = log_off;

				count++;
				head = head ? head - 1 : BYPASS_MAX_LOGS;
				log_off = base + (head * 5);
				}

				/* reverse order (oldest first) for output */
				while (count--) {
				int year;
				u32 mon, days, hours, min, sec;
				u32 time = eeprom[count].logs & BYPASS_LOG_TIME_M;
				u32 event = (eeprom[count].logs & BYPASS_LOG_EVENT_M) >>
				BYPASS_LOG_EVENT_SHIFT;
				u8 action = eeprom[count].actions & BYPASS_LOG_ACTION_M;
				u16 day_mon[2][13] = {
				{0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365},
				{0, 31, 59, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366}
				};
				char *event_str[] = {"unknown", "main on", "aux on",
				"main off", "aux off", "WDT", "user" };
				char *action_str[] = {"ignore", "normal", "bypass", "isolate",};

				/* verify vaild data 1 - 6 */
				if (event < BYPASS_EVENT_MAIN_ON \|\| event > BYPASS_EVENT_USR)
				event = 0;

				/*
				* time is in sec's this year, so convert to something
				* printable.
				*/
				ixgbe_get_bypass_time(&year, &sec);
				days = time / SEC_PER_DAY;
				for (i = 11; days < day_mon[LEAP_YR(year)][i]; i--)
				continue;
				mon = i + 1; /* display month as 1-12 */
				time -= (day_mon[LEAP_YR(year)][i] * SEC_PER_DAY);
				days = (time / SEC_PER_DAY) + 1; /* first day is 1 */
				time %= SEC_PER_DAY;
				hours = time / (60 * 60);
				time %= (60 * 60);
				min = time / 60;
				sec = time % 60;
				device_printf(adapter->dev,
				"UT %02d/%02d %02d:%02d:%02d %8.8s -> %7.7s\n",
				mon, days, hours, min, sec, event_str[event],
				action_str[action]);
				cmd = BYPASS_PAGE_CTL2 \| BYPASS_WE \| BYPASS_CTL2_RW;
				cmd \|= ((eeprom[count].clear_off + 3)
				<< BYPASS_CTL2_OFFSET_SHIFT) & BYPASS_CTL2_OFFSET_M;
				cmd \|= ((eeprom[count].logs & ~BYPASS_LOG_CLEAR_M) >> 24);

				ixgbe_bypass_mutex_enter(adapter);

				error = hw->mac.ops.bypass_rw(hw, cmd, &status);

				/* wait for the write to stick */
				msec_delay(100);

				ixgbe_bypass_mutex_clear(adapter);

				if (error)
				return (EINVAL);
				}

				status = 0; /* reset */
				/* Another log command can now run */
				while (atomic_cmpset_int(&adapter->bypass.log, 1, 0) == 0)
				usec_delay(3000);
				return (error);

				unlock_err:
				ixgbe_bypass_mutex_clear(adapter);
				status = 0; /* reset */
				while (atomic_cmpset_int(&adapter->bypass.log, 1, 0) == 0)
				usec_delay(3000);
				return (EINVAL);
				} /* ixgbe_bp_log */

				/************************************************************************
				* ixgbe_bypass_init - Set up infrastructure for the bypass feature
				*
				* Do time and sysctl initialization here. This feature is
				* only enabled for the first port of a bypass adapter.
				************************************************************************/
				void
				ixgbe_bypass_init(struct adapter *adapter)
				{
				struct ixgbe_hw *hw = &adapter->hw;
				device_t dev = adapter->dev;
				struct sysctl_oid *bp_node;
				struct sysctl_oid_list *bp_list;
				u32 mask, value, sec, year;

				if (!(adapter->feat_cap & IXGBE_FEATURE_BYPASS))
				return;

				/* First set up time for the hardware */
				ixgbe_get_bypass_time(&year, &sec);

				mask = BYPASS_CTL1_TIME_M
				\| BYPASS_CTL1_VALID_M
				\| BYPASS_CTL1_OFFTRST_M;

				value = (sec & BYPASS_CTL1_TIME_M)
				\| BYPASS_CTL1_VALID
				\| BYPASS_CTL1_OFFTRST;

				ixgbe_bypass_mutex_enter(adapter);
				hw->mac.ops.bypass_set(hw, BYPASS_PAGE_CTL1, mask, value);
				ixgbe_bypass_mutex_clear(adapter);

				/* Now set up the SYSCTL infrastructure */

				/*
				* The log routine is kept separate from the other
				* children so a general display command like:
				* `sysctl dev.ix.0.bypass` will not show the log.
				*/
				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
				SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
				OID_AUTO, "bypass_log", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_log, "I", "Bypass Log");

				/* All other setting are hung from the 'bypass' node */
				bp_node = SYSCTL_ADD_NODE(device_get_sysctl_ctx(dev),
				SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
				OID_AUTO, "bypass", CTLFLAG_RD, NULL, "Bypass");

				bp_list = SYSCTL_CHILDREN(bp_node);

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "version", CTLTYPE_INT \| CTLFLAG_RD,
				adapter, 0, ixgbe_bp_version, "I", "Bypass Version");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "state", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_set_state, "I", "Bypass State");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "timeout", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_timeout, "I", "Bypass Timeout");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "main_on", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_main_on, "I", "Bypass Main On");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "main_off", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_main_off, "I", "Bypass Main Off");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "aux_on", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_aux_on, "I", "Bypass Aux On");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "aux_off", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_aux_off, "I", "Bypass Aux Off");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "wd_set", CTLTYPE_INT \| CTLFLAG_RW,
				adapter, 0, ixgbe_bp_wd_set, "I", "Set BP Watchdog");

				SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), bp_list,
				OID_AUTO, "wd_reset", CTLTYPE_INT \| CTLFLAG_WR,
				adapter, 0, ixgbe_bp_wd_reset, "S", "Bypass WD Reset");

				adapter->feat_en \|= IXGBE_FEATURE_BYPASS;
				} /* ixgbe_bypass_init */

Changeset View

Standalone View

sys/dev/ixgbe/if_bypass.c

0 as the value is not bool