Page MenuHomeFreeBSD
Differential D9213 Diff 24313 Mk/bsd.qt.mk

Changeset View

Standalone View

View Options

Mk/bsd.qt.mk

Show All 21 Lines
.if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include) .if !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)
Qt_Include_MAINTAINER= kde@FreeBSD.org Qt_Include_MAINTAINER= kde@FreeBSD.org
Qt_Pre_Include= bsd.qt.mk Qt_Pre_Include= bsd.qt.mk
# Qt versions currently supported by the framework. # Qt versions currently supported by the framework.
_QT_SUPPORTED?= 4 5 _QT_SUPPORTED?= 4 5
QT4_VERSION?= 4.8.7 QT4_VERSION?= 4.8.7
QT5_VERSION?= 5.6.2 QT5_VERSION?= 5.7.1
_QT_RELNAME= qt${_QT_VERSION:R:R} _QT_RELNAME= qt${_QT_VERSION:R:R}
_QT_VERSION= # empty _QT_VERSION= # empty
.for ver in ${_QT_SUPPORTED} .for ver in ${_QT_SUPPORTED}
. if defined(USE_QT${ver}) . if defined(USE_QT${ver})
. if empty(_QT_VERSION) . if empty(_QT_VERSION)
_QT_VERSION= ${QT${ver}_VERSION} _QT_VERSION= ${QT${ver}_VERSION}
. else . else
# Reject different USE_QT*. # Reject different USE_QT*.
IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #' IGNORE?= can't be installed: different Qt versions specified via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
. endif . endif
. endif . endif
.endfor .endfor
.if empty(_QT_VERSION) .if empty(_QT_VERSION)
# The file was included without USE_QT*. # The file was included without USE_QT*.
IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #' IGNORE?= can't be installed: bsd.qt.mk may only be included via USE_QT[${_QT_SUPPORTED:S/ //g}] #'
.endif .endif
.if defined(QT_DIST) .if defined(QT_DIST)
QT_NONSTANDARD= yes QT_NONSTANDARD= yes
MASTER_SITES= ${MASTER_SITE_QT} MASTER_SITES= ${MASTER_SITE_QT}
# Useless, as it must be defined before including bsd.port.pre.mk (at least
# because of bsd.options.mk).
#PKGNAMEPREFIX?= ${_QT_RELNAME}-
DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo DISTINFO_FILE?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/distinfo
LICENSE?= LGPL21 LICENSE?= LGPL21
. if !exists(${PKGDIR}/pkg-descr) . if !exists(${PKGDIR}/pkg-descr)
DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr DESCR?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/pkg-descr
. endif . endif
Show All 20 Lines
# This could arguably work for Qt4 too, but since it is maintenance mode it is # This could arguably work for Qt4 too, but since it is maintenance mode it is
# better not to fix what is not explicitly broken there. # better not to fix what is not explicitly broken there.
LDFLAGS+= -Wl,--as-needed LDFLAGS+= -Wl,--as-needed
. if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \ . if ${.TARGETS:Mmakesum} || ${.TARGETS:Mfetch} && \
defined(DISABLE_SIZE) && defined(NO_CHECKSUM) defined(DISABLE_SIZE) && defined(NO_CHECKSUM)
# Ensure that the "makesum" target (with its inner "fetch" one) uses # Ensure that the "makesum" target (with its inner "fetch" one) uses
# devel/qt*/distinfo for every port. # devel/qt*/distinfo for every port.
. if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME} . if ${DISTINFO_FILE:H} == ${.CURDIR:H:H}/devel/${_QT_RELNAME}
QT_DIST= 3d base canvas3d connectivity declarative graphicaleffects imageformats \ QT_DIST= 3d base canvas3d charts connectivity datavis3d \
location multimedia quickcontrols quickcontrols2 script sensors serialbus serialport svg tools \ declarative declarative-render2d gamepad \
translations webchannel websockets x11extras xmlpatterns graphicaleffects imageformats location multimedia \
quickcontrols quickcontrols2 script scxml sensors \
serialbus serialport svg tools translations \
virtualkeyboard webchannel webkit websockets \
x11extras xmlpatterns
. endif . endif
matUnsubmitted
Done
Inline Actions

i think there is a level of indentation missing here in all but the first line.

mat: i think there is a level of indentation missing here in all but the first line.
matUnsubmitted
Not Done
Inline Actions

These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4.

mat: These seem to be overwrapped, as if your tabs were 8 spaces wide and not 4.
. endif . endif
. if ${QT_DIST} == "base" && ${PORTNAME} != "qmake" . if ${QT_DIST} == "base" && ${PORTNAME} != "qmake"
# Qt configure requires pkg-config to detect dependencies. # Qt configure requires pkg-config to detect dependencies.
USES+= pkgconfig USES+= pkgconfig
# Set QMAKESPEC when building qtbase so that qmake (called by the configure # Set QMAKESPEC when building qtbase so that qmake (called by the configure
# script) can find the mkspecs we create ourselves in devel/qmake5. # script) can find the mkspecs we create ourselves in devel/qmake5.
Show All 20 LinesCONFIGURE_ARGS+=-opensource -confirm-license \
-plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \ -plugindir ${PREFIX}/${QT_PLUGINDIR_REL} \
-importdir ${PREFIX}/${QT_IMPORTDIR_REL} \ -importdir ${PREFIX}/${QT_IMPORTDIR_REL} \
-datadir ${PREFIX}/${QT_DATADIR_REL} \ -datadir ${PREFIX}/${QT_DATADIR_REL} \
-docdir ${PREFIX}/${QT_DOCDIR_REL} \ -docdir ${PREFIX}/${QT_DOCDIR_REL} \
-translationdir ${PREFIX}/${QT_L10NDIR_REL} \ -translationdir ${PREFIX}/${QT_L10NDIR_REL} \
-sysconfdir ${PREFIX}/${QT_ETCDIR_REL} -sysconfdir ${PREFIX}/${QT_ETCDIR_REL}
. if ${_QT_VERSION:M4*} . if ${_QT_VERSION:M4*}
CONFIGURE_ARGS+=-fast \ CONFIGURE_ARGS+= -fast \
-system-libjpeg -system-libpng \ -system-libjpeg -system-libpng \
-system-libmng -system-libtiff -system-zlib \ -system-libmng -system-libtiff -system-zlib \
-no-phonon-backend \ -no-phonon-backend \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/examples \ -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/examples \
-demosdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/demos -demosdir ${PREFIX}/${QT_EXAMPLEDIR_REL}/demos
. else . else
CONFIGURE_ARGS+=-nomake examples -nomake tests \ CONFIGURE_ARGS+= -nomake examples -nomake tests \
-archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \ -archdatadir ${PREFIX}/${QT_ARCHDIR_REL} \
-libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \ -libexecdir ${PREFIX}/${QT_LIBEXECDIR_REL} \
-qmldir ${PREFIX}/${QT_QMLDIR_REL} \ -qmldir ${PREFIX}/${QT_QMLDIR_REL} \
-examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \ -examplesdir ${PREFIX}/${QT_EXAMPLEDIR_REL} \
-testsdir ${PREFIX}/${QT_TESTDIR_REL} -testsdir ${PREFIX}/${QT_TESTDIR_REL}
. if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2) . if ${ARCH} == i386 && empty(MACHINE_CPU:Msse2)
CONFIGURE_ARGS+=-no-sse2 CONFIGURE_ARGS+= -no-sse2
. endif . endif
. endif . endif
rakucoUnsubmitted
Done
Inline Actions

Can you add a bigger description of why we do this?

rakuco: Can you add a bigger description of why we do this?
. if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG) . if defined(WANT_QT_DEBUG) || defined(WITH_DEBUG)
WITH_DEBUG= yes WITH_DEBUG= yes
STRIP= # It's done prior to bsd.qt.mk inclusion. STRIP= # It's done prior to bsd.qt.mk inclusion.
CONFIGURE_ARGS+=-debug -separate-debug-info CONFIGURE_ARGS+= -debug -separate-debug-info
# Override configuration in global qconfig.pri. # Override configuration in global qconfig.pri.
QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \ QMAKE_ARGS+= QT_CONFIG+="debug separate_debug_info" \
QT_CONFIG-="release" QT_CONFIG-="release"
PLIST_SUB+= DEBUG="" PLIST_SUB+= DEBUG=""
. else . else
CONFIGURE_ARGS+=-release -no-separate-debug-info CONFIGURE_ARGS+= -release -no-separate-debug-info
QMAKE_ARGS+= QT_CONFIG+="release" \ QMAKE_ARGS+= QT_CONFIG+="release" \
QT_CONFIG-="debug separate_debug_info" QT_CONFIG-="debug separate_debug_info"
PLIST_SUB+= DEBUG="@comment " PLIST_SUB+= DEBUG="@comment "
. endif . endif
. if defined(WANT_QT_VERBOSE_CONFIGURE) . if defined(WANT_QT_VERBOSE_CONFIGURE)
CONFIGURE_ARGS+=-verbose CONFIGURE_ARGS+= -verbose
. endif . endif
. if ${QT_DIST} == "base" || ${_QT_VERSION:M4*} . if ${QT_DIST} == "base" || ${_QT_VERSION:M4*}
. if ${_QT_VERSION:M4*} . if ${_QT_VERSION:M4*}
_EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \ _EXTRA_PATCHES_QT4= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src-corelib-global-qglobal.h \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-libtool
. else . else
_EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-src_corelib_global_qcompilerdetection.h \ _EXTRA_PATCHES_QT5= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_create__cmake.prf \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-mkspecs_features_qt__module.prf
. endif . endif
EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \ EXTRA_PATCHES?= ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-configure \
${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \ ${.CURDIR:H:H}/devel/${_QT_RELNAME}/files/extrapatch-config.tests-unix-compile.test \
${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5} ${_EXTRA_PATCHES_QT4} ${_EXTRA_PATCHES_QT5}
. endif . endif
# Override settings installed in qconfig.h and *.pri files. The flags will be # Override settings installed in qconfig.h and *.pri files. The flags will be
# installed along with the port, but have to be passed as arguments while # installed along with the port, but have to be passed as arguments while
# building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups") # building the port itself. Flags prefixed with "-" (e.g., "-CUPS" and "-cups")
# are needed to disable some features. # are needed to disable some features.
. if !defined(${QT_MODNAME}) || empty(${QT_MODNAME}) . if !defined(${QT_MODNAME}) || empty(${QT_MODNAME})
# Used for both qconfig-*.h and qt_config_*.pri; it can't be empty. # Used for both qconfig-*.h and qt_config_*.pri; it can't be empty.
QT_MODNAME= ${PORTNAME} QT_MODNAME= ${PORTNAME}
. endif . endif
QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix). QT_DEFINES?= # For qconfig.h flags (without "QT_" prefix).
QT_CONFIG?= # For *.pri files QT_CONFIG flags. QT_CONFIG?= # For *.pri files QT_CONFIG flags.
. if ${QT_DEFINES} . if ${QT_DEFINES}
QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}" QMAKE_ARGS+= DEFINES+="${QT_DEFINES:O:u:C/^([^-])/QT_\1/:C/^-/QT_NO_/:O}"
. if ${QT_DEFINES:N-*} . if ${QT_DEFINES:N-*}
# Use a script to cleanup qconfig-modules.h (see qt-post-install). # Use a script to cleanup qconfig-modules.h (see qt-post-install).
PKGDEINSTALL= ${WRKDIR}/pkg-deinstall PKGDEINSTALL= ${WRKDIR}/pkg-deinstall
. endif . endif
. endif . endif
. if ${QT_CONFIG:N-*} . if ${QT_CONFIG:N-*}
QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}" QMAKE_ARGS+= QT_CONFIG+="${QT_CONFIG:N-*:O:u}"
. endif . endif
. if ${QT_CONFIG:M-*} . if ${QT_CONFIG:M-*}
QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}" QMAKE_ARGS+= QT_CONFIG-="${QT_CONFIG:M-*:O:u:C/^-//}"
. endif . endif
PLIST_SUB+= SHORTVER=${DISTVERSION:R} \ PLIST_SUB+= SHORTVER=${_QT_VERSION:R} \
FULLVER=${DISTVERSION:C/-.*//} FULLVER=${_QT_VERSION:C/-.*//}
.endif # defined(QT_DIST) .endif # defined(QT_DIST)
.if ${_QT_VERSION:M4*}
QT_BINDIR_REL?= bin
QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_PLUGINDIR_REL?= ${QT_LIBDIR_REL}/plugins
QT_IMPORTDIR_REL?= ${QT_LIBDIR_REL}/imports
.endif
# A wrapper (qtchooser) is used to invoke binaries. # A wrapper (qtchooser) is used to invoke binaries.
QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin QT_BINDIR_REL?= ${QT_ARCHDIR_REL}/bin
QT_INCDIR_REL?= include/${_QT_RELNAME} QT_INCDIR_REL?= include/${_QT_RELNAME}
QT_LIBDIR_REL?= lib QT_LIBDIR_REL?= lib/${_QT_RELNAME}
QT_ARCHDIR_REL?=${QT_LIBDIR_REL}/${_QT_RELNAME} QT_ARCHDIR_REL?= ${QT_LIBDIR_REL}
QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins QT_PLUGINDIR_REL?= ${QT_ARCHDIR_REL}/plugins
QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME} QT_LIBEXECDIR_REL?= libexec/${_QT_RELNAME}
QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports QT_IMPORTDIR_REL?= ${QT_ARCHDIR_REL}/imports
QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml QT_QMLDIR_REL?= ${QT_ARCHDIR_REL}/qml
QT_DATADIR_REL?=share/${_QT_RELNAME} QT_DATADIR_REL?= share/${_QT_RELNAME}
QT_DOCDIR_REL?= share/doc/${_QT_RELNAME} QT_DOCDIR_REL?= share/doc/${_QT_RELNAME}
QT_L10NDIR_REL?=${QT_DATADIR_REL}/translations QT_L10NDIR_REL?= ${QT_DATADIR_REL}/translations
QT_ETCDIR_REL?= etc/xdg QT_ETCDIR_REL?= etc/xdg
QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME} QT_EXAMPLEDIR_REL?= share/examples/${_QT_RELNAME}
QT_TESTDIR_REL?=${QT_DATADIR_REL}/tests QT_TESTDIR_REL?= ${QT_DATADIR_REL}/tests
QT_CMAKEDIR_REL?= lib/cmake
QT_QTCHOOSERDIR_REL?= ${QT_ETCDIR_REL}/qtchooser
# Not customizable. # Not customizable.
.if ${_QT_VERSION:M4*} .if ${_QT_VERSION:M4*}
QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs QT_MKSPECDIR_REL= ${QT_DATADIR_REL}/mkspecs
_QT_LIBVER= # empty _QT_LIBVER= # empty
_QT_BINSUFX= -${_QT_RELNAME}
.else .else
QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs QT_MKSPECDIR_REL= ${QT_ARCHDIR_REL}/mkspecs
_QT_LIBVER= ${_QT_VERSION:R:R} _QT_LIBVER= ${_QT_VERSION:R:R}
_QT_BINSUFX= # empty
.endif .endif
LRELEASE?= ${QT_BINDIR}/lrelease${_QT_BINSUFX} LRELEASE?= ${QT_BINDIR}/lrelease
LUPDATE?= ${QT_BINDIR}/lupdate${_QT_BINSUFX} LUPDATE?= ${QT_BINDIR}/lupdate
MOC?= ${QT_BINDIR}/moc${_QT_BINSUFX} MOC?= ${QT_BINDIR}/moc
RCC?= ${QT_BINDIR}/rcc RCC?= ${QT_BINDIR}/rcc
UIC?= ${QT_BINDIR}/uic${_QT_BINSUFX} UIC?= ${QT_BINDIR}/uic
QMAKE?= ${QT_BINDIR}/qmake${_QT_BINSUFX} QMAKE?= ${QT_BINDIR}/qmake
# Needed to redefine the qmake target for internal Qt configuration. # Needed to redefine the qmake target for internal Qt configuration.
matUnsubmitted
Not Done
Inline Actions

If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not QT_BINDIR. (If they are the ones in PREFIX/some-qt-directory then it's ok.)

mat: If these are the ones created by qtchooser in PREFIX/bin, it should be PREFIX/bin, not…
tcbernerAuthorUnsubmitted
Not Done
Inline Actions

These are the real binaries, i.e. /usr/local/lib/qt4/bin/lrelease .

tcberner: These are the real binaries, i.e. `/usr/local/lib/qt4/bin/lrelease` .
_QMAKE?= ${QMAKE} _QMAKE?= ${QMAKE}
QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER} QMAKESPEC?= ${QT_MKSPECDIR}/freebsd-${QMAKE_COMPILER}
# The whole Qt distribution should be built with the same compiler, but it's # The whole Qt distribution should be built with the same compiler, but it's
# better to support custom settings. Dereferencing the detection allows to # better to support custom settings. Dereferencing the detection allows to
# avoid forking a shell on each inclusion of this file, and to catch any CXX # avoid forking a shell on each inclusion of this file, and to catch any CXX
# customization (via USE_GCC, etc.). # customization (via USE_GCC, etc.).
QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in *clang*) echo clang ;; *) echo g++ ;; esac) QMAKE_COMPILER= $$(ccver="$$(${CXX} --version)"; case "$$ccver" in *clang*) echo clang ;; *) echo g++ ;; esac)
# Import QMAKE_ENV and QMAKE_ARGS definitions. # Import QMAKE_ENV and QMAKE_ARGS definitions.
USES+= qmake:_env USES+= qmake:_env
.for dir in INC ARCH PLUGIN LIBEXEC IMPORT \ .for dir in BIN INC LIB ARCH PLUGIN LIBEXEC IMPORT \
QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC QML DATA DOC L10N ETC EXAMPLE TEST MKSPEC \
rakucoUnsubmitted
Done
Inline Actions

Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space before "QT_DIST".
Additionally, the comment is basically describing what we can see below, it'd be more helpful if it explained why instead.

rakuco: Very small nitpick: there are two spaces instead of one after the '#'s, and an extra space…
CMAKE QTCHOOSER
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL} QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL}
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}" PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
.endfor .endfor
.for dir in BIN LIB # Pass the chosen qt version to the environment for qtchooser
QT_${dir}DIR= ${PREFIX}/${QT_${dir}DIR_REL} CONFIGURE_ENV+= QT_SELECT=${_QT_RELNAME}
. if defined(QT_DIST) MAKE_ENV+= QT_SELECT=${_QT_RELNAME}
PLIST_SUB+= QT_${dir}DIR="${QT_${dir}DIR_REL}"
. endif
.endfor
.endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include) .endif # !defined(_POSTMKINCLUDED) && !defined(Qt_Pre_Include)
rakucoUnsubmitted
Done
Inline Actions

Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences with a period.

rakuco: Another small style nitpick: "qt" should be "Qt", and it's always good to end the sentences…
.if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include) .if defined(_POSTMKINCLUDED) && !defined(Qt_Post_Include)
Qt_Post_Include= bsd.qt.mk Qt_Post_Include= bsd.qt.mk
.if !defined(QT_NONSTANDARD) .if !defined(QT_NONSTANDARD)
CONFIGURE_ENV+= QTDIR="${PREFIX}" QMAKE="${QMAKE}" \ CONFIGURE_ENV+= QTDIR="${QT_LIBDIR}" QMAKE="${QMAKE}" \
MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \ MOC="${MOC}" RCC="${RCC}" UIC="${UIC}" \
QMAKESPEC="${QMAKESPEC}" QMAKESPEC="${QMAKESPEC}"
CONFIGURE_ARGS+=--with-qt-includes=${QT_INCDIR} \ CONFIGURE_ARGS+= --with-qt-includes=${QT_INCDIR} \
--with-qt-libraries=${QT_LIBDIR} \ --with-qt-libraries=${QT_LIBDIR} \
--with-extra-includes=${LOCALBASE}/include \ --with-extra-includes=${LOCALBASE}/include \
--with-extra-libs=${LOCALBASE}/lib --with-extra-libs=${LOCALBASE}/lib
.endif # !defined(QT_NONSTANDARD) .endif # !defined(QT_NONSTANDARD)
_USE_QT_ALL= assistant dbus declarative designer doc gui help \ _USE_QT_ALL= assistant dbus declarative designer doc gui help \
imageformats l10n linguist linguisttools multimedia \ imageformats l10n linguist linguisttools multimedia \
network opengl pixeltool qdbusviewer qmake script \ network opengl pixeltool qdbusviewer qmake script \
scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \ scripttools sql sql-ibase sql-mysql sql-odbc sql-pgsql \
sql-sqlite2 sql-sqlite3 svg testlib webkit \ sql-sqlite2 sql-sqlite3 svg testlib webkit \
xml xmlpatterns xml xmlpatterns
_USE_QT4_ONLY= accessible assistant-adp assistantclient clucene codecs-cn codecs-jp \ _USE_QT4_ONLY= accessible assistant-adp assistantclient clucene \
codecs-kr codecs-tw corelib demo graphicssystems-opengl \ codecs-cn codecs-jp codecs-kr codecs-tw corelib demo \
rakucoUnsubmitted
Not Done
Inline Actions

Style: "# Components", not "#Components".

rakuco: Style: "# Components", not "#Components".
help-tools iconengines inputmethods makeqpf moc phonon \ graphicssystems-opengl help-tools iconengines \
phonon-gst porting qdoc3 qmlviewer qt3support qtconfig \ inputmethods makeqpf moc phonon phonon-gst porting \
qtestlib qvfb rcc uic uic3 xmlpatterns-tool qdoc3 qmlviewer qt3support qtconfig qtestlib qvfb \
rcc uic uic3 xmlpatterns-tool
_USE_QT5_ONLY= 3d buildtools canvas3d concurrent connectivity core \ _USE_QT5_ONLY= 3d buildtools canvas3d charts concurrent connectivity \
examples graphicaleffects location paths phonon4 \ core datavis3d declarative-render2d examples gamepad \
printsupport qdbus qdoc qdoc-data qev qml quick quickcontrols \ graphicaleffects location paths phonon4 printsupport \
quickcontrols2 sensors serialbus serialport sql-tds \ qdbus qdoc qev qml quick quickcontrols quickcontrols2 \
uiplugin uitools webchannel websockets widgets x11extras scxml sensors serialbus serialport sql-tds uiplugin \
uitools virtualkeyboard webchannel websockets \
widgets x11extras
#Components:
# comp_PORT port directory
# comp_PATH file used to check existence, should be the "defining"
# library/binary of the port
# comp_LINK *FOR INTERNAL USE WHEN BUILDING QT5*
# libraries used for linking against the module.
# They will be linked into ${CONFIGURE_WRKSRC}/lib
# for Qt5 ports.
# The approach via _LINK was chosen, to be able to define
# multiple "so" files per component (should that ever be
# necessary). It also allows to only auto symlink in from
# components that are actually needed during the build of
# Qt5.
3d_PORT= graphics/${_QT_RELNAME}-3d 3d_PORT= graphics/${_QT_RELNAME}-3d
3d_LIB= libQt${_QT_LIBVER}3DCore.so 3d_LIB= libQt${_QT_LIBVER}3DCore.so
accessible_PORT= accessibility/${_QT_RELNAME}-accessible accessible_PORT= accessibility/${_QT_RELNAME}-accessible
accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so accessible_PATH= ${QT_PLUGINDIR}/accessible/libqtaccessiblewidgets.so
assistant_PORT= devel/${_QT_RELNAME}-assistant assistant_PORT= devel/${_QT_RELNAME}-assistant
assistant_PATH= ${QT_BINDIR}/assistant${_QT_BINSUFX} assistant_PATH= ${QT_BINDIR}/assistant
assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp assistant-adp_PORT= devel/${_QT_RELNAME}-assistant-adp
assistant-adp_PATH= ${QT_BINDIR}/assistant_adp assistant-adp_PATH= ${QT_BINDIR}/assistant_adp
assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient assistantclient_PORT= devel/${_QT_RELNAME}-libqtassistantclient
assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so assistantclient_LIB= libQt${_QT_LIBVER}AssistantClient.so
buildtools_PORT= devel/${_QT_RELNAME}-buildtools buildtools_PORT= devel/${_QT_RELNAME}-buildtools
buildtools_PATH= ${MOC} buildtools_PATH= ${MOC}
canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d canvas3d_PORT= x11-toolkits/${_QT_RELNAME}-canvas3d
canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir canvas3d_PATH= ${QT_QMLDIR}/QtCanvas3D/qmldir
clucene_PORT= textproc/clucene-${_QT_RELNAME} charts_PORT= x11-toolkits/${_QT_RELNAME}-charts
charts_LIB= libQt${_QT_LIBVER}Charts.so
clucene_PORT= textproc/${_QT_RELNAME}-clucene
clucene_LIB= libQt${_QT_LIBVER}CLucene.so clucene_LIB= libQt${_QT_LIBVER}CLucene.so
codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn codecs-cn_PORT= chinese/${_QT_RELNAME}-codecs-cn
codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so codecs-cn_PATH= ${QT_PLUGINDIR}/codecs/libqcncodecs.so
codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp codecs-jp_PORT= japanese/${_QT_RELNAME}-codecs-jp
codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so codecs-jp_PATH= ${QT_PLUGINDIR}/codecs/libqjpcodecs.so
codecs-kr_PORT= korean/${_QT_RELNAME}-codecs-kr codecs-kr_PORT= korean/${_QT_RELNAME}-codecs-kr
codecs-kr_PATH= ${QT_PLUGINDIR}/codecs/libqkrcodecs.so codecs-kr_PATH= ${QT_PLUGINDIR}/codecs/libqkrcodecs.so
codecs-tw_PORT= chinese/${_QT_RELNAME}-codecs-tw codecs-tw_PORT= chinese/${_QT_RELNAME}-codecs-tw
codecs-tw_PATH= ${QT_PLUGINDIR}/codecs/libqtwcodecs.so codecs-tw_PATH= ${QT_PLUGINDIR}/codecs/libqtwcodecs.so
concurrent_PORT= devel/${_QT_RELNAME}-concurrent concurrent_PORT= devel/${_QT_RELNAME}-concurrent
concurrent_LIB= libQt${_QT_LIBVER}Concurrent.so concurrent_LIB= libQt${_QT_LIBVER}Concurrent.so
connectivity_PORT= comms/${_QT_RELNAME}-connectivity connectivity_PORT= comms/${_QT_RELNAME}-connectivity
connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so connectivity_LIB= libQt${_QT_LIBVER}Bluetooth.so
core_PORT= devel/${_QT_RELNAME}-core core_PORT= devel/${_QT_RELNAME}-core
core_LIB= libQt${_QT_LIBVER}Core.so core_LIB= libQt${_QT_LIBVER}Core.so
core_LINK= ${core_LIB}
corelib_PORT= devel/${_QT_RELNAME}-corelib corelib_PORT= devel/${_QT_RELNAME}-corelib
corelib_LIB= ${core_LIB} corelib_LIB= ${core_LIB}
dbus_PORT= devel/dbus-${_QT_RELNAME} datavis3d_PORT= x11-toolkits/${_QT_RELNAME}-datavis3d
datavis3d_LIB= libQt${_QT_LIBVER}DataVisualization.so
dbus_PORT= devel/${_QT_RELNAME}-dbus
dbus_LIB= libQt${_QT_LIBVER}DBus.so dbus_LIB= libQt${_QT_LIBVER}DBus.so
dbus_LINK= ${dbus_LIB}
declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative declarative_PORT= x11-toolkits/${_QT_RELNAME}-declarative
declarative_LIB= libQt${_QT_LIBVER}Declarative.so declarative_LIB= libQt${_QT_LIBVER}Declarative.so
declarative-render2d_PORT= x11-toolkits/${_QT_RELNAME}-declarative-render2d
declarative-render2d_PATH= ${QT_PLUGINDIR}/scenegraph/libsoftwarecontext.so
demo_PORT= misc/${_QT_RELNAME}-qtdemo demo_PORT= misc/${_QT_RELNAME}-qtdemo
demo_PATH= ${QT_BINDIR}/qtdemo demo_PATH= ${QT_BINDIR}/qtdemo
designer_PORT= devel/${_QT_RELNAME}-designer designer_PORT= devel/${_QT_RELNAME}-designer
designer_PATH= ${QT_BINDIR}/designer${_QT_BINSUFX} designer_PATH= ${QT_BINDIR}/designer
doc_PORT= misc/${_QT_RELNAME}-doc doc_PORT= misc/${_QT_RELNAME}-doc
doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R} doc_PATH= ${_QT_RELNAME}-doc>=${_QT_VERSION:R:R}
examples_PORT= misc/${_QT_RELNAME}-examples examples_PORT= misc/${_QT_RELNAME}-examples
examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R} examples_PATH= ${_QT_RELNAME}-examples>=${_QT_VERSION:R:R}
gamepad_PORT= x11-toolkits/${_QT_RELNAME}-gamepad
gamepad_LIB= libQt${_QT_LIBVER}Gamepad.so
graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects graphicaleffects_PORT= graphics/${_QT_RELNAME}-graphicaleffects
graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir graphicaleffects_PATH= ${QT_QMLDIR}/QtGraphicalEffects/qmldir
graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl graphicssystems-opengl_PORT= x11/${_QT_RELNAME}-graphicssystems-opengl
graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so graphicssystems-opengl_PATH= ${QT_PLUGINDIR}/graphicssystems/libqglgraphicssystem.so
gui_PORT= x11-toolkits/${_QT_RELNAME}-gui gui_PORT= x11-toolkits/${_QT_RELNAME}-gui
gui_LIB= libQt${_QT_LIBVER}Gui.so gui_LIB= libQt${_QT_LIBVER}Gui.so
gui_LINK= ${gui_LIB}
help_PORT= devel/${_QT_RELNAME}-help help_PORT= devel/${_QT_RELNAME}-help
help_LIB= libQt${_QT_LIBVER}Help.so help_LIB= libQt${_QT_LIBVER}Help.so
help-tools_PORT= devel/${_QT_RELNAME}-help-tools help-tools_PORT= devel/${_QT_RELNAME}-help-tools
help-tools_PATH= ${QT_BINDIR}/qhelpgenerator help-tools_PATH= ${QT_BINDIR}/qhelpgenerator
iconengines_PORT= graphics/${_QT_RELNAME}-iconengines iconengines_PORT= graphics/${_QT_RELNAME}-iconengines
iconengines_PATH= ${QT_PLUGINDIR}/iconengines/libqsvgicon.so iconengines_PATH= ${QT_PLUGINDIR}/iconengines/libqsvgicon.so
imageformats_PORT= graphics/${_QT_RELNAME}-imageformats imageformats_PORT= graphics/${_QT_RELNAME}-imageformats
imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so imageformats_PATH= ${QT_PLUGINDIR}/imageformats/libqtiff.so
inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods inputmethods_PORT= x11/${_QT_RELNAME}-inputmethods
inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so inputmethods_PATH= ${QT_PLUGINDIR}/inputmethods/libqimsw-multi.so
linguist_PORT= devel/${_QT_RELNAME}-linguist linguist_PORT= devel/${_QT_RELNAME}-linguist
linguist_PATH= ${QT_BINDIR}/linguist${_QT_BINSUFX} linguist_PATH= ${QT_BINDIR}/linguist
linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools linguisttools_PORT= devel/${_QT_RELNAME}-linguisttools
linguisttools_PATH= ${LRELEASE} linguisttools_PATH= ${LRELEASE}
location_PORT= devel/${_QT_RELNAME}-location location_PORT= devel/${_QT_RELNAME}-location
location_LIB= libQt${_QT_LIBVER}Location.so location_LIB= libQt${_QT_LIBVER}Location.so
l10n_PORT= misc/${_QT_RELNAME}-l10n l10n_PORT= misc/${_QT_RELNAME}-l10n
l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R} l10n_PATH= ${_QT_RELNAME}-l10n>=${_QT_VERSION:R:R}
makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf makeqpf_PORT= devel/${_QT_RELNAME}-makeqpf
makeqpf_PATH= ${QT_BINDIR}/makeqpf${_QT_BINSUFX} makeqpf_PATH= ${QT_BINDIR}/makeqpf
moc_PORT= devel/${_QT_RELNAME}-moc moc_PORT= devel/${_QT_RELNAME}-moc
moc_PATH= ${MOC} moc_PATH= ${MOC}
multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia multimedia_PORT= multimedia/${_QT_RELNAME}-multimedia
multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so multimedia_LIB= libQt${_QT_LIBVER}Multimedia.so
network_PORT= net/${_QT_RELNAME}-network network_PORT= net/${_QT_RELNAME}-network
network_LIB= libQt${_QT_LIBVER}Network.so network_LIB= libQt${_QT_LIBVER}Network.so
network_LINK= ${network_LIB}
opengl_PORT= graphics/${_QT_RELNAME}-opengl opengl_PORT= graphics/${_QT_RELNAME}-opengl
opengl_LIB= libQt${_QT_LIBVER}OpenGL.so opengl_LIB= libQt${_QT_LIBVER}OpenGL.so
paths_PORT= sysutils/${_QT_RELNAME}-qtpaths paths_PORT= sysutils/${_QT_RELNAME}-qtpaths
paths_PATH= ${QT_BINDIR}/qtpaths paths_PATH= ${QT_BINDIR}/qtpaths
pixeltool_PORT= graphics/${_QT_RELNAME}-pixeltool pixeltool_PORT= graphics/${_QT_RELNAME}-pixeltool
Show All 9 Lines
phonon-gst_PATH= ${QT_PLUGINDIR}/phonon_backend/libphonon_gstreamer.so phonon-gst_PATH= ${QT_PLUGINDIR}/phonon_backend/libphonon_gstreamer.so
porting_PORT= devel/${_QT_RELNAME}-porting porting_PORT= devel/${_QT_RELNAME}-porting
porting_PATH= ${QT_BINDIR}/qt3to4 porting_PATH= ${QT_BINDIR}/qt3to4
printsupport_PORT= print/${_QT_RELNAME}-printsupport printsupport_PORT= print/${_QT_RELNAME}-printsupport
printsupport_LIB= libQt${_QT_LIBVER}PrintSupport.so printsupport_LIB= libQt${_QT_LIBVER}PrintSupport.so
qdbus_PORT= devel/${_QT_RELNAME}-qdbus qdbus_PORT= devel/${_QT_RELNAME}-qdbus
qdbus_PATH= ${QT_BINDIR}/qdbus qdbus_PATH= ${QT_BINDIR}/qdbus
qdbusviewer_PORT= devel/${_QT_RELNAME}-qdbusviewer qdbusviewer_PORT= devel/${_QT_RELNAME}-qdbusviewer
qdbusviewer_PATH= ${QT_BINDIR}/qdbusviewer qdbusviewer_PATH= ${QT_BINDIR}/qdbusviewer
qdoc_PORT= devel/${_QT_RELNAME}-qdoc qdoc_PORT= devel/${_QT_RELNAME}-qdoc
qdoc_PATH= ${QT_BINDIR}/qdoc qdoc_PATH= ${QT_BINDIR}/qdoc
qdoc-data_PORT= devel/${_QT_RELNAME}-qdoc-data
qdoc-data_PATH= ${QT_DOCDIR}/global/config.qdocconf
qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3 qdoc3_PORT= devel/${_QT_RELNAME}-qdoc3
qdoc3_PATH= ${QT_BINDIR}/qdoc3 qdoc3_PATH= ${QT_BINDIR}/qdoc3
qev_PORT= x11/${_QT_RELNAME}-qev qev_PORT= x11/${_QT_RELNAME}-qev
qev_PATH= ${QT_BINDIR}/qev qev_PATH= ${QT_BINDIR}/qev
qmake_PORT= devel/qmake${_QT_VERSION:R:R} qmake_PORT= devel/${_QT_RELNAME}-qmake
qmake_PATH= ${QMAKE} qmake_PATH= ${QMAKE}
qml_PORT= lang/${_QT_RELNAME}-qml qml_PORT= lang/${_QT_RELNAME}-qml
qml_LIB= libQt${_QT_LIBVER}Qml.so qml_LIB= libQt${_QT_LIBVER}Qml.so
qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer qmlviewer_PORT= devel/${_QT_RELNAME}-qmlviewer
qmlviewer_PATH= ${QT_BINDIR}/qmlviewer qmlviewer_PATH= ${QT_BINDIR}/qmlviewer
qt3support_PORT= devel/${_QT_RELNAME}-qt3support qt3support_PORT= devel/${_QT_RELNAME}-qt3support
qt3support_LIB= libQt${_QT_LIBVER}3Support.so qt3support_LIB= libQt${_QT_LIBVER}3Support.so
qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig qtconfig_PORT= misc/${_QT_RELNAME}-qtconfig
qtconfig_PATH= ${QT_BINDIR}/qtconfig${_QT_BINSUFX} qtconfig_PATH= ${QT_BINDIR}/qtconfig
qtestlib_PORT= ${testlib_PORT} qtestlib_PORT= ${testlib_PORT}
qtestlib_LIB= ${testlib_LIB} qtestlib_LIB= ${testlib_LIB}
quick_PORT= x11-toolkits/${_QT_RELNAME}-quick quick_PORT= x11-toolkits/${_QT_RELNAME}-quick
quick_LIB= libQt${_QT_LIBVER}Quick.so quick_LIB= libQt${_QT_LIBVER}Quick.so
quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols quickcontrols_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols
quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir quickcontrols_PATH= ${QT_QMLDIR}/QtQuick/Controls/qmldir
quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2 quickcontrols2_PORT= x11-toolkits/${_QT_RELNAME}-quickcontrols2
quickcontrols2_LIB= libQt${_QT_LIBVER}LabsTemplates.so quickcontrols2_LIB= libQt${_QT_LIBVER}QuickControls2.so
qvfb_PORT= devel/${_QT_RELNAME}-qvfb qvfb_PORT= devel/${_QT_RELNAME}-qvfb
qvfb_PATH= ${QT_BINDIR}/qvfb${_QT_BINSUFX} qvfb_PATH= ${QT_BINDIR}/qvfb
rcc_PORT= devel/${_QT_RELNAME}-rcc rcc_PORT= devel/${_QT_RELNAME}-rcc
rcc_PATH= ${RCC} rcc_PATH= ${RCC}
sensors_PORT= comms/${_QT_RELNAME}-sensors sensors_PORT= comms/${_QT_RELNAME}-sensors
sensors_LIB= libQt${_QT_LIBVER}Sensors.so sensors_LIB= libQt${_QT_LIBVER}Sensors.so
script_PORT= devel/${_QT_RELNAME}-script script_PORT= devel/${_QT_RELNAME}-script
script_LIB= libQt${_QT_LIBVER}Script.so script_LIB= libQt${_QT_LIBVER}Script.so
scripttools_PORT= devel/${_QT_RELNAME}-scripttools scripttools_PORT= devel/${_QT_RELNAME}-scripttools
scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so scripttools_LIB= libQt${_QT_LIBVER}ScriptTools.so
scxml_PORT= devel/${_QT_RELNAME}-scxml
scxml_LIB= libQt${_QT_LIBVER}Scxml.so
serialbus_PORT= comms/${_QT_RELNAME}-serialbus serialbus_PORT= comms/${_QT_RELNAME}-serialbus
serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so serialbus_LIB= libQt${_QT_LIBVER}SerialBus.so
serialport_PORT= comms/${_QT_RELNAME}-serialport serialport_PORT= comms/${_QT_RELNAME}-serialport
serialport_LIB= libQt${_QT_LIBVER}SerialPort.so serialport_LIB= libQt${_QT_LIBVER}SerialPort.so
sql_PORT= databases/${_QT_RELNAME}-sql sql_PORT= databases/${_QT_RELNAME}-sql
sql_LIB= libQt${_QT_LIBVER}Sql.so sql_LIB= libQt${_QT_LIBVER}Sql.so
sql_LINK= ${sql_LIB}
sql-pgsql_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlpsql.so sql-pgsql_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlpsql.so
. if ${_QT_VERSION:M4*} .if ${_QT_VERSION:M4*}
sql-sqlite2_PORT= databases/${_QT_RELNAME}-sqlite-plugin sql-sqlite2_PORT= databases/${_QT_RELNAME}-sqlite-plugin
. endif .endif
sql-sqlite3_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlite.so sql-sqlite3_PATH= ${QT_PLUGINDIR}/sqldrivers/libqsqlite.so
. for db in ibase mysql odbc pgsql sqlite2 sqlite3 tds .for db in ibase mysql odbc pgsql sqlite2 sqlite3 tds
. if ${_QT_VERSION:M4*} .if ${_QT_VERSION:M4*}
sql-${db}_PORT?= databases/${_QT_RELNAME}-${db}-plugin sql-${db}_PORT?= databases/${_QT_RELNAME}-${db}-plugin
. else .else
sql-${db}_PORT?= databases/${_QT_RELNAME}-sqldrivers-${db} sql-${db}_PORT?= databases/${_QT_RELNAME}-sqldrivers-${db}
. endif .endif
sql-${db}_PATH?= ${QT_PLUGINDIR}/sqldrivers/libqsql${db:C/^sql//}.so sql-${db}_PATH?= ${QT_PLUGINDIR}/sqldrivers/libqsql${db:C/^sql//}.so
. endfor .endfor
svg_PORT= graphics/${_QT_RELNAME}-svg svg_PORT= graphics/${_QT_RELNAME}-svg
svg_LIB= libQt${_QT_LIBVER}Svg.so svg_LIB= libQt${_QT_LIBVER}Svg.so
testlib_PORT= devel/${_QT_RELNAME}-testlib testlib_PORT= devel/${_QT_RELNAME}-testlib
testlib_LIB= libQt${_QT_LIBVER}Test.so testlib_LIB= libQt${_QT_LIBVER}Test.so
uic_PORT= devel/${_QT_RELNAME}-uic uic_PORT= devel/${_QT_RELNAME}-uic
uic_PATH= ${UIC} uic_PATH= ${UIC}
uic3_PORT= devel/${_QT_RELNAME}-uic3 uic3_PORT= devel/${_QT_RELNAME}-uic3
uic3_PATH= ${QT_BINDIR}/uic3 uic3_PATH= ${QT_BINDIR}/uic3
uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin uiplugin_PORT= x11-toolkits/${_QT_RELNAME}-uiplugin
uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin uiplugin_PATH= ${QT_INCDIR}/QtUiPlugin/QtUiPlugin
uitools_PORT= devel/${_QT_RELNAME}-uitools uitools_PORT= devel/${_QT_RELNAME}-uitools
uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a uitools_PATH= ${QT_LIBDIR}/libQt${_QT_LIBVER}UiTools.a
virtualkeyboard_PORT= x11-toolkits/${_QT_RELNAME}-virtualkeyboard
virtualkeyboard_PATH= ${QT_PLUGINDIR}/platforminputcontexts/libqtvirtualkeyboardplugin.so
webchannel_PORT= www/${_QT_RELNAME}-webchannel webchannel_PORT= www/${_QT_RELNAME}-webchannel
webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so webchannel_LIB= libQt${_QT_LIBVER}WebChannel.so
websockets_PORT= www/${_QT_RELNAME}-websockets websockets_PORT= www/${_QT_RELNAME}-websockets
websockets_LIB= libQt${_QT_LIBVER}WebSockets.so websockets_LIB= libQt${_QT_LIBVER}WebSockets.so
webkit_PORT= www/webkit-${_QT_RELNAME} webkit_PORT= www/${_QT_RELNAME}-webkit
webkit_LIB= libQt${_QT_LIBVER}WebKit.so webkit_LIB= libQt${_QT_LIBVER}WebKit.so
widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets widgets_PORT= x11-toolkits/${_QT_RELNAME}-widgets
widgets_LIB= libQt${_QT_LIBVER}Widgets.so widgets_LIB= libQt${_QT_LIBVER}Widgets.so
widgets_LINK= ${widgets_LIB}
x11extras_PORT= x11/${_QT_RELNAME}-x11extras x11extras_PORT= x11/${_QT_RELNAME}-x11extras
x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so x11extras_LIB= libQt${_QT_LIBVER}X11Extras.so
xml_PORT= textproc/${_QT_RELNAME}-xml xml_PORT= textproc/${_QT_RELNAME}-xml
xml_LIB= libQt${_QT_LIBVER}Xml.so xml_LIB= libQt${_QT_LIBVER}Xml.so
xmlpatterns_PORT= textproc/${_QT_RELNAME}-xmlpatterns xmlpatterns_PORT= textproc/${_QT_RELNAME}-xmlpatterns
xmlpatterns_LIB= libQt${_QT_LIBVER}XmlPatterns.so xmlpatterns_LIB= libQt${_QT_LIBVER}XmlPatterns.so
xmlpatterns-tool_PORT= textproc/${_QT_RELNAME}-xmlpatterns-tool xmlpatterns-tool_PORT= textproc/${_QT_RELNAME}-xmlpatterns-tool
xmlpatterns-tool_PATH= ${QT_BINDIR}/xmlpatterns xmlpatterns-tool_PATH= ${QT_BINDIR}/xmlpatterns
_USE_QT= ${USE_QT${_QT_VERSION:R:R}} _USE_QT= ${USE_QT${_QT_VERSION:R:R}}
▲ Show 20 Lines • Show All 54 Lines • ▼ Show 20 Lines
_QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp _QT_TOOLS+= qdbuscpp2xml qdbusxml2cpp
. endif . endif
. if ${PORTNAME} != "widgets" . if ${PORTNAME} != "widgets"
_QT_TOOLS+= ${UIC} _QT_TOOLS+= ${UIC}
. endif . endif
pre-configure: qtbase-pre-configure pre-configure: qtbase-pre-configure
qtbase-pre-configure: qtbase-pre-configure:
. for tool in ${_QT_TOOLS} . for tool in ${_QT_TOOLS}
tcbernerAuthorUnsubmitted
Not Done
Inline Actions

I've been thinking of dropping this here, and defining _LINK components for these, and handling them like the other base dependencies in lines 680-688.
(This would probably require some modifications to switch between ${QT_LIBDIR}/${comp_lib} resp ${QT_BINDIR}/${comp_bin} or something).

But maybe it would be a nice simplification...

tcberner: I've been thinking of dropping this here, and defining _LINK components for these, and handling…
@${TEST} -e ${QT_BINDIR}/${tool:T} && \ @${TEST} -e ${QT_BINDIR}/${tool:T} && \
${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \ ${LN} -sf ${QT_BINDIR}/${tool:T} ${CONFIGURE_WRKSRC}/bin/${tool:T} || \
${TRUE} ${TRUE}
. endfor
# Symlink in the required libraries to ${CONFIGURE_WRKSRC}/lib of the components
# defined in USE_QT5 which have _LINK defined.
. for comp in ${_USE_QT:O:u}
. if defined(${comp}_LINK)
. for comp_lib in ${${comp}_LINK}
@${TEST} -f ${QT_LIBDIR}/${comp_lib} && ${LN} -sf ${QT_LIBDIR}/${comp_lib} ${CONFIGURE_WRKSRC}/lib || ${TRUE}
. endfor
. endif
. endfor . endfor
# Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out # Add ${LOCALBASE}/lib to DEFAULT_LIBDIRS, which we use to filter out
# certain paths from pkg-config calls (see the explanation in # certain paths from pkg-config calls (see the explanation in
# devel/qt5/files/patch-configure) as well as for setting # devel/qt5/files/patch-configure) as well as for setting
# QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for # QMAKE_DEFAULT_LIBDIR in mkspecs/qconfig.pri. Part of the solution for
# ports/194088. # ports/194088.
post-patch: qtbase-post-patch post-patch: qtbase-post-patch
qtbase-post-patch: qtbase-post-patch:
rakucoUnsubmitted
Done
Inline Actions

I think this can moved before the "Add ${LOCALBASE}/lib" block.

rakuco: I think this can moved before the "Add ${LOCALBASE}/lib" block.
${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \ ${REINPLACE_CMD} -e "/DEFAULT_LIBDIRS=/ s,\\\\\"\\\\n,\\\\n${LOCALBASE}/lib&," \
${WRKSRC}/configure ${WRKSRC}/configure
. if ${PORTNAME} != "qmake" . if ${PORTNAME} != "qmake"
_QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake _QMAKE= ${CONFIGURE_WRKSRC}/bin/qmake
post-configure: qmake-configure post-configure: qmake-configure
. endif . endif
▲ Show 20 Lines • Show All 61 Lines • Show Last 20 Lines