Differential D6888 Diff 17690 sys/arm/broadcom/bcm2835/bcm2835_rng.c

Changeset View

Standalone View

sys/arm/broadcom/bcm2835/bcm2835_rng.c

This file was added.

				/*
				* Copyright (c) 2015, 2016, Stephen J. Kiernan
				* All rights reserved.
				*
				* Redistribution and use in source and binary forms, with or without
				* modification, are permitted provided that the following conditions
				* are met:
				* 1. Redistributions of source code must retain the above copyright
				* notice, this list of conditions and the following disclaimer.
				* 2. Redistributions in binary form must reproduce the above copyright
				* notice, this list of conditions and the following disclaimer in the
				* documentation and/or other materials provided with the distribution.
				*
				* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
				* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
				* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
				* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
				* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
				* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
				* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
				* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
				* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
				* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
				* SUCH DAMAGE.
				*/

				#include <sys/cdefs.h>

				__FBSDID("$FreeBSD$");

				#include <sys/param.h>
				#include <sys/kernel.h>
				#include <sys/lock.h>
				#include <sys/malloc.h>
				#include <sys/module.h>
				#include <sys/random.h>
				#include <sys/sbuf.h>
				#include <sys/sysctl.h>
				#include <sys/selinfo.h>
				#include <sys/systm.h>
				#include <sys/bus.h>
				#include <sys/rman.h>

				#include <machine/bus.h>
				#include <machine/resource.h>

				#include <dev/ofw/openfirm.h>
				#include <dev/ofw/ofw_bus.h>
				#include <dev/ofw/ofw_bus_subr.h>

				#include <dev/random/randomdev.h>
				#include <dev/random/random_harvestq.h>

				#if !defined(BCM2835_RNG_USE_CALLOUT)
				#define BCM2835_RNG_USE_INTERRUPT
				markmUnsubmitted Not Done Inline Actions This mode looks like it may be a liability? Should the callout/interrupt-using method not be the default? markm: This mode looks like it may be a liability? Should the callout/interrupt-using method not be…
				stevekAuthorUnsubmitted Not Done Inline Actions Yes, this bled in from my testing. stevek: Yes, this bled in from my testing.
				#endif

				static device_attach_t bcm2835_rng_attach;
				static device_detach_t bcm2835_rng_detach;
				static device_probe_t bcm2835_rng_probe;

				#define RNG_CTRL 0x00 /* RNG Control Register */
				#define RNG_COMBLK1_OSC 0x003f0000 /* Combiner Blk 1 Oscillator */
				#define RNG_COMBLK1_OSC_SHIFT 16
				#define RNG_COMBLK2_OSC 0x0fc00000 /* Combiner Blk 2 Oscillator */
				#define RNG_COMBLK2_OSC_SHIFT 22
				#define RNG_JCLK_BYP_DIV_CNT 0x0000ff00 /* Jitter clk bypass divider
				count */
				#define RNG_JCLK_BYP_DIV_CNT_SHIFT 8
				#define RNG_JCLK_BYP_SRC 0x00000020 /* Jitter clk bypass source */
				#define RNG_JCLK_BYP_SEL 0x00000010 /* Jitter clk bypass select */
				#define RNG_RBG2X 0x00000002 /* RBG 2X SPEED */
				#define RNG_RBGEN_BIT 0x00000001 /* Enable RNG bit */

				markmUnsubmitted Not Done Inline Actions There is a mix of tabs and spaces in these defines giving a ragged indentation. Please check style(9) and use only one form for uniformity. markm: There is a mix of tabs and spaces in these defines giving a ragged indentation. Please check…
				#define RNG_STATUS 0x04 /* RNG status register */
				#define RND_VAL_SHIFT 24 /* Shift for valid words */
				#define RND_VAL_MASK 0x000000ff /* Number valid words mask */
				#define RND_VAL_WARM_CNT 0x40000 /* RNG Warm Up count */
				#define RND_WARM_CNT 0xfffff /* RNG Warm Up Count mask */

				#define RNG_DATA 0x08 /* RNG Data Register */
				#define RNG_FF_THRES 0x0c
				#define RNG_FF_THRES_MASK 0x0000001f

				#define RNG_INT_MASK 0x10
				#define RNG_INT_OFF_BIT 0x00000001

				#define RNG_FF_DEFAULT 0x10 /* FIFO threshold default */

				#define RNG_FIFO_WORDS (RNG_FF_DEFAULT / sizeof(uint32_t))

				#define RNG_NUM_OSCILLATORS 6
				#define RNG_STALL_COUNT_DEFAULT 10

				struct bcm2835_rng_softc {
				device_t sc_dev;
				struct resource * sc_mem_res;
				struct resource * sc_irq_res;
				void * sc_intr_hdl;
				#if defined(BCM2835_RNG_USE_CALLOUT) \|\| defined(BCM2835_RNG_USE_INTERRUPT)
				uint32_t sc_buf[RNG_FIFO_WORDS];
				#endif
				#if defined(BCM2835_RNG_USE_CALLOUT)
				struct callout sc_rngto;
				int sc_rnghz;
				#endif
				int sc_stall_count;
				int sc_rbg2x;
				long sc_underrun;
				};

				static __inline void
				bcm2835_rng_stat_inc_underrun(struct bcm2835_rng_softc *sc)
				{
				markmUnsubmitted Not Done Inline Actions This define looks a little spare here. markm: This define looks a little spare here.

				atomic_add_long(&sc->sc_underrun, 1);
				}

				static __inline uint32_t
				bcm2835_rng_read4(struct bcm2835_rng_softc *sc, bus_size_t off)
				{

				return bus_read_4(sc->sc_mem_res, off);
				}

				static __inline void
				bcm2835_rng_read_multi4(struct bcm2835_rng_softc *sc, bus_size_t off,
				uint32_t *datap, bus_size_t count)
				markmUnsubmitted Not Done Inline Actions An inline function gives slightly better type-safety and better readability, not to mention consistency with the functions below. markm: An inline function gives slightly better type-safety and better readability, not to mention…
				{

				bus_read_multi_4(sc->sc_mem_res, off, datap, count);
				}

				static __inline void
				bcm2835_rng_write4(struct bcm2835_rng_softc *sc, bus_size_t off, uint32_t val)
				{

				bus_write_4(sc->sc_mem_res, off, val);
				}

				static void
				bcm2835_rng_dump_registers(struct bcm2835_rng_softc sc, struct sbuf sbp)
				{
				uint32_t comblk2_osc, comblk1_osc, jclk_byp_div, val;
				int i;

				/* Display RNG control register contents */
				val = bcm2835_rng_read4(sc, RNG_CTRL);
				sbuf_printf(sbp, "RNG_CTRL (%08x)\n", val);

				comblk2_osc = (val & RNG_COMBLK2_OSC) >> RNG_COMBLK2_OSC_SHIFT;
				sbuf_printf(sbp, " RNG_COMBLK2_OSC (%02x)\n", comblk2_osc);
				for (i = 0; i < RNG_NUM_OSCILLATORS; i++)
				if ((comblk2_osc & (1 << i)) == 0)
				sbuf_printf(sbp, " Oscillator %d enabled\n", i + 1);

				comblk1_osc = (val & RNG_COMBLK1_OSC) >> RNG_COMBLK1_OSC_SHIFT;
				sbuf_printf(sbp, " RNG_COMBLK1_OSC (%02x)\n", comblk1_osc);
				for (i = 0; i < RNG_NUM_OSCILLATORS; i++)
				if ((comblk1_osc & (1 << i)) == 0)
				sbuf_printf(sbp, " Oscillator %d enabled\n", i + 1);

				jclk_byp_div = (val & RNG_JCLK_BYP_DIV_CNT) >>
				RNG_JCLK_BYP_DIV_CNT_SHIFT;
				sbuf_printf(sbp,
				" RNG_JCLK_BYP_DIV_CNT (%02x)\n APB clock frequency / %d\n",
				markmUnsubmitted Not Done Inline Actions Is this right? The general pattern suggests the constant should be 0x1. Also, can the whole block not be done with some arithmetic, rather than having a bunch of nearly identical constant strings? markm: Is this right? The general pattern suggests the constant should be 0x1. Also, can the whole…
				jclk_byp_div, 2 * (jclk_byp_div + 1));

				sbuf_printf(sbp, " RNG_JCLK_BYP_SRC:\n %s\n",
				(val & RNG_JCLK_BYP_SRC) ? "Use divided down APB clock" :
				"Use RNG clock (APB clock)");

				sbuf_printf(sbp, " RNG_JCLK_BYP_SEL:\n %s\n",
				(val & RNG_JCLK_BYP_SEL) ? "Bypass internal jitter clock" :
				"Use internal jitter clock");

				if ((val & RNG_RBG2X) != 0)
				sbuf_cat(sbp, " RNG_RBG2X: RNG 2X SPEED enabled\n");

				if ((val & RNG_RBGEN_BIT) != 0)
				sbuf_cat(sbp, " RNG_RBGEN_BIT: RBG enabled\n");

				/* Display RNG status register contents */
				val = bcm2835_rng_read4(sc, RNG_STATUS);
				sbuf_printf(sbp, "RNG_CTRL (%08x)\n", val);
				sbuf_printf(sbp, " RND_VAL: %02x\n",
				(val >> RND_VAL_SHIFT) & RND_VAL_MASK);
				sbuf_printf(sbp, " RND_WARM_CNT: %05x\n", val & RND_WARM_CNT);

				/* Display FIFO threshold register contents */
				val = bcm2835_rng_read4(sc, RNG_FF_THRES);
				sbuf_printf(sbp, "RNG_FF_THRES: %05x\n", val & RNG_FF_THRES_MASK);

				/* Display interrupt mask register contents */
				val = bcm2835_rng_read4(sc, RNG_INT_MASK);
				sbuf_printf(sbp, "RNG_INT_MASK: interrupt %s\n",
				((val & RNG_INT_OFF_BIT) != 0) ? "disabled" : "enabled");
				}

				static void
				bcm2835_rng_disable_intr(struct bcm2835_rng_softc *sc)
				{
				uint32_t mask;

				/* Set the interrupt off bit in the interrupt mask register */
				mask = bcm2835_rng_read4(sc, RNG_INT_MASK);
				mask \|= RNG_INT_OFF_BIT;
				bcm2835_rng_write4(sc, RNG_INT_MASK, mask);
				}

				#if defined(BCM2835_RNG_USE_INTERRUPT)
				static void
				bcm2835_rng_enable_intr(struct bcm2835_rng_softc *sc)
				{
				uint32_t mask;

				/* Clear the interrupt off bit in the interrupt mask register */
				mask = bcm2835_rng_read4(sc, RNG_INT_MASK);
				mask &= ~RNG_INT_OFF_BIT;
				bcm2835_rng_write4(sc, RNG_INT_MASK, mask);
				}
				#endif

				static void
				bcm2835_rng_start(struct bcm2835_rng_softc *sc)
				{
				uint32_t ctrl;

				/* Disable the interrupt */
				bcm2835_rng_disable_intr(sc);

				/* Set the warmup count */
				bcm2835_rng_write4(sc, RNG_STATUS, RND_VAL_WARM_CNT);

				/* Enable the RNG */
				ctrl = bcm2835_rng_read4(sc, RNG_CTRL);
				ctrl \|= RNG_RBGEN_BIT;
				if (sc->sc_rbg2x)
				ctrl \|= RNG_RBG2X;
				bcm2835_rng_write4(sc, RNG_CTRL, ctrl);

				#if defined(BCM2835_RNG_USE_INTERRUPT)
				/* Enable the interrupt */
				bcm2835_rng_enable_intr(sc);
				#endif
				}

				static void
				markmUnsubmitted Not Done Inline Actions It might be a good idea to make this tweekable, like a sysctl, instead of a hard constant. A panic is quite harsh, so I agree with the #ifdef defaulting to "off". markm: It might be a good idea to make this tweekable, like a sysctl, instead of a hard constant. A…
				bcm2835_rng_stop(struct bcm2835_rng_softc *sc)
				{
				uint32_t ctrl;

				/* Disable the RNG */
				ctrl = bcm2835_rng_read4(sc, RNG_CTRL);
				ctrl &= ~RNG_RBGEN_BIT;
				bcm2835_rng_write4(sc, RNG_CTRL, ctrl);
				}
				markmUnsubmitted Not Done Inline Actions Yuk :-) A delay here s a no-no. The interrupt/callout method needs to be the default/only method, and this delay needs to go. markm: Yuk :-) A delay here s a no-no. The interrupt/callout method needs to be the default/only…
				stevekAuthorUnsubmitted Not Done Inline Actions Okay, I'll just remove the source registration pieces. Makes sense to just axe them since the RBG is not able to keep up with requests as a pure entropy source. stevek: Okay, I'll just remove the source registration pieces. Makes sense to just axe them since the…

				static void
				bcm2835_rng_harvest(struct bcm2835_rng_softc *sc)
				{
				uint32_t *dest;
				uint32_t status;
				u_int cnt, nread, num_avail, num_words;
				int seen_underrun, num_stalls;

				dest = sc->sc_buf;
				nread = num_words = 0;
				seen_underrun = num_stalls = 0;
				for (cnt = sizeof(sc->sc_buf) / sizeof(uint32_t); cnt > 0;
				cnt -= num_words) {
				/* Read status register to find out how many words available */
				status = bcm2835_rng_read4(sc, RNG_STATUS);
				num_avail = (status >> RND_VAL_SHIFT) & RND_VAL_MASK;

				/* If we have none... */
				if (num_avail == 0) {
				bcm2835_rng_stat_inc_underrun(sc);
				if (++seen_underrun >= sc->sc_stall_count) {
				if (num_stalls++ > 0) {
				device_printf(sc->sc_dev,
				"RNG stalled, disabling device\n");
				bcm2835_rng_stop(sc);
				break;
				} else {
				device_printf(sc->sc_dev,
				"Too many underruns, resetting\n");
				bcm2835_rng_stop(sc);
				bcm2835_rng_start(sc);
				seen_underrun = 0;
				}
				}
				/* Try again */
				continue;
				}

				CTR2(KTR_DEV, "%s: %d words available in RNG FIFO",
				device_get_nameunit(sc->sc_dev), num_avail);

				/* Pull MIN(num_avail, cnt) words from the FIFO */
				num_words = (num_avail > cnt) ? cnt : num_avail;
				bcm2835_rng_read_multi4(sc, RNG_DATA, dest,
				num_words);
				dest += num_words;
				nread += num_words;
				}

				cnt = nread * sizeof(uint32_t);
				if (cnt > 0)
				random_harvest_queue(sc->sc_buf, cnt, cnt * NBBY / 2,
				RANDOM_PURE_BROADCOM);

				#if defined(BCM2835_RNG_USE_CALLOUT)
				callout_reset(&sc->sc_rngto, sc->sc_rnghz, bcm2835_rng_harvest, sc);
				#endif
				}

				static int
				sysctl_bcm2835_rng_2xspeed(SYSCTL_HANDLER_ARGS)
				{
				struct bcm2835_rng_softc *sc = arg1;
				int error, rbg2x;

				rbg2x = sc->sc_rbg2x;
				error = sysctl_handle_int(oidp, &rbg2x, 0, req);
				if (error)
				return (error);
				if (req->newptr == NULL)
				return (error);
				if (rbg2x == sc->sc_rbg2x)
				return (0);

				/* Reset the RNG */
				bcm2835_rng_stop(sc);
				sc->sc_rbg2x = rbg2x;
				bcm2835_rng_start(sc);

				return (0);
				}

				#ifdef BCM2835_RNG_DEBUG_REGISTERS
				static int
				sysctl_bcm2835_rng_dump(SYSCTL_HANDLER_ARGS)
				{
				struct sbuf sb;
				struct bcm2835_rng_softc *sc = arg1;
				int error;

				error = sysctl_wire_old_buffer(req, 0);
				if (error != 0)
				return (error);
				sbuf_new_for_sysctl(&sb, NULL, 128, req);
				bcm2835_rng_dump_registers(sc, &sb);
				error = sbuf_finish(&sb);
				sbuf_delete(&sb);
				return (error);
				}
				#endif

				static int
				bcm2835_rng_probe(device_t dev)
				{

				if (!ofw_bus_status_okay(dev))
				return (ENXIO);

				if (!ofw_bus_is_compatible(dev, "broadcom,bcm2835-rng"))
				return (ENXIO);

				device_set_desc(dev, "Broadcom BCM2835 RNG");

				return (BUS_PROBE_DEFAULT);
				}

				static int
				bcm2835_rng_attach(device_t dev)
				{
				struct bcm2835_rng_softc *sc;
				struct sysctl_ctx_list *sysctl_ctx;
				struct sysctl_oid *sysctl_tree;
				int error, rid;

				error = 0;
				sc = device_get_softc(dev);
				sc->sc_dev = dev;
				sc->sc_stall_count = RNG_STALL_COUNT_DEFAULT;
				#ifdef BCM2835_RNG_USE_CALLOUT
				/* Initialize callout */
				callout_init(&sc->sc_rngto, CALLOUT_MPSAFE);
				#endif
				TUNABLE_INT_FETCH("bcmrng.2xspeed", &sc->sc_rbg2x);
				TUNABLE_INT_FETCH("bcmrng.stall_count", &sc->sc_stall_count);

				/* Allocate memory resources */
				rid = 0;
				sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
				RF_ACTIVE);
				if (sc->sc_mem_res == NULL) {
				bcm2835_rng_detach(dev);
				return (ENXIO);
				}

				#if defined(BCM2835_RNG_USE_INTERRUPT)
				/* Allocate interrupt resource */
				rid = 0;
				sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
				RF_SHAREABLE \| RF_ACTIVE);
				if (sc->sc_irq_res == NULL) {
				bcm2835_rng_detach(dev);
				return (ENXIO);
				}

				/* Set up the interrupt handler */
				error = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_BIO \| INTR_MPSAFE,
				NULL, (driver_intr_t *)bcm2835_rng_harvest, sc, &sc->sc_intr_hdl);
				if (error) {
				device_printf(dev, "Failed to set up IRQ\n");
				sc->sc_intr_hdl = NULL;
				bcm2835_rng_detach(dev);
				return (error);
				}
				#endif

				/* Start the RNG */
				bcm2835_rng_start(sc);

				/* Dump the registers if booting verbose */
				markmUnsubmitted Not Done Inline Actions Can this also be a sysctl? markm: Can this also be a sysctl?
				stevekAuthorUnsubmitted Not Done Inline Actions There is a per-device sysctl. See farther below in this function. stevek: There is a per-device sysctl. See farther below in this function.
				if (bootverbose) {
				struct sbuf sb;

				(void) sbuf_new(&sb, NULL, 256,
				SBUF_AUTOEXTEND \| SBUF_INCLUDENUL);
				bcm2835_rng_dump_registers(sc, &sb);
				sbuf_trim(&sb);
				error = sbuf_finish(&sb);
				if (error == 0)
				device_printf(dev, "%s", sbuf_data(&sb));
				markmUnsubmitted Not Done Inline Actions Yuk. I know there is precedent for goto's in the BSD kernel, but I'd prefer not to see any new ones. (Preference not insistence). markm: Yuk. I know there is precedent for goto's in the BSD kernel, but I'd prefer not to see any new…
				sbuf_delete(&sb);
				}

				sysctl_ctx = device_get_sysctl_ctx(dev);
				sysctl_tree = device_get_sysctl_tree(dev);
				SYSCTL_ADD_LONG(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO,
				"underrun", CTLFLAG_RD, &sc->sc_underrun,
				"Number of FIFO underruns");
				SYSCTL_ADD_PROC(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO,
				"2xspeed", CTLTYPE_INT \| CTLFLAG_RW, sc, 0,
				sysctl_bcm2835_rng_2xspeed, "I", "Enable RBG 2X SPEED");
				SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO,
				"stall_count", CTLFLAG_RW, &sc->sc_stall_count,
				RNG_STALL_COUNT_DEFAULT, "Number of underruns to assume RNG stall");
				#ifdef BCM2835_RNG_DEBUG_REGISTERS
				SYSCTL_ADD_PROC(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO,
				"dumpregs", CTLTYPE_STRING \| CTLFLAG_RD, sc, 0,
				sysctl_bcm2835_rng_dump, "S", "Dump RNG registers");
				#endif

				#if defined(BCM2835_RNG_USE_CALLOUT)
				/* Reset callout */
				if (hz >= 100)
				sc->sc_rnghz = hz / 100;
				else
				sc->sc_rnghz = 1;
				callout_reset(&sc->sc_rngto, sc->sc_rnghz, bcm2835_rng_harvest, sc);
				#endif

				return (0);
				}

				static int
				bcm2835_rng_detach(device_t dev)
				{
				struct bcm2835_rng_softc *sc;
				#if defined(BCM2835_RNG_USE_INTERRUPT)
				int error;
				#endif

				sc = device_get_softc(dev);

				/* Stop the RNG */
				bcm2835_rng_stop(sc);

				/* Drain the callout it */
				#if defined(BCM2835_RNG_USE_CALLOUT)
				callout_drain(&sc->sc_rngto);
				#endif

				#if defined(BCM2835_RNG_USE_INTERRUPT)
				/* Tear down the interrupt */
				if (sc->sc_irq_res && sc->sc_intr_hdl) {
				error = bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_intr_hdl);
				if (error != 0) {
				device_printf(dev, "could not tear down IRQ\n");
				return (error);
				}
				sc->sc_intr_hdl = NULL;
				}

				/* Release interrupt resource */
				if (sc->sc_irq_res) {
				bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_irq_res);
				sc->sc_irq_res = NULL;
				}
				#endif

				/* Release memory resource */
				if (sc->sc_mem_res != NULL)
				bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_mem_res);

				return (0);
				}

				static device_method_t bcm2835_rng_methods[] = {
				/* Device interface */
				DEVMETHOD(device_probe, bcm2835_rng_probe),
				DEVMETHOD(device_attach, bcm2835_rng_attach),
				DEVMETHOD(device_detach, bcm2835_rng_detach),

				DEVMETHOD_END
				};

				static driver_t bcm2835_rng_driver = {
				"bcmrng",
				bcm2835_rng_methods,
				sizeof(struct bcm2835_rng_softc)
				};
				static devclass_t bcm2835_rng_devclass;

				DRIVER_MODULE(bcm2835_rng, simplebus, bcm2835_rng_driver,
				bcm2835_rng_devclass, 0, 0);
				DRIVER_MODULE(bcm2835_rng, ofwbus, bcm2835_rng_driver, bcm2835_rng_devclass, 0,
				0);
				MODULE_VERSION(bcm2835_rng, 1);
				MODULE_DEPEND(bcm2835_rng, randomdev, 1, 1, 1);