Changeset View
Changeset View
Standalone View
Standalone View
head/sys/gnu/dts/mips/HC5XXX.dtsi
/include/ "mt7620a.dtsi" | #include "mt7620a.dtsi" | ||||
/ { | / { | ||||
chosen { | chosen { | ||||
bootargs = "console=ttyS0,115200"; | bootargs = "console=ttyS0,115200"; | ||||
}; | }; | ||||
palmbus@10000000 { | gpio-keys-polled { | ||||
sysc@0 { | compatible = "gpio-keys-polled"; | ||||
#address-cells = <1>; | |||||
#size-cells = <0>; | |||||
poll-interval = <20>; | |||||
reset { | |||||
label = "reset"; | |||||
gpios = <&gpio0 12 1>; | |||||
linux,code = <0x198>; | |||||
}; | |||||
}; | |||||
gpio_export { | |||||
compatible = "gpio-export"; | |||||
#size-cells = <0>; | |||||
usbpower { | |||||
gpio-export,name = "usbpower"; | |||||
gpio-export,output = <1>; | |||||
gpios = <&gpio0 13 0>; | |||||
}; | |||||
}; | |||||
}; | |||||
&sysc { | |||||
ralink,gpiomux = "i2c", "jtag"; | ralink,gpiomux = "i2c", "jtag"; | ||||
ralink,uartmux = "gpio"; | ralink,uartmux = "gpio"; | ||||
ralink,wdtmux = <1>; | ralink,wdtmux = <1>; | ||||
}; | }; | ||||
gpio0: gpio@600 { | &gpio0 { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
gpio2: gpio@660 { | &gpio2 { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
gpio3: gpio@688 { | &gpio3 { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
spi@b00 { | &spi0 { | ||||
status = "okay"; | status = "okay"; | ||||
m25p80@0 { | m25p80@0 { | ||||
#address-cells = <1>; | #address-cells = <1>; | ||||
#size-cells = <1>; | #size-cells = <1>; | ||||
compatible = "jedec,spi-nor"; | compatible = "jedec,spi-nor"; | ||||
reg = <0 0>; | reg = <0 0>; | ||||
linux,modalias = "m25p80", "w25q128"; | linux,modalias = "m25p80", "w25q128"; | ||||
spi-max-frequency = <10000000>; | spi-max-frequency = <10000000>; | ||||
partition@0 { | partition@0 { | ||||
label = "u-boot"; | label = "u-boot"; | ||||
reg = <0x0 0x30000>; | reg = <0x0 0x30000>; | ||||
}; | }; | ||||
partition@30000 { | partition@30000 { | ||||
label = "u-boot-env"; | label = "u-boot-env"; | ||||
reg = <0x30000 0x10000>; | reg = <0x30000 0x10000>; | ||||
read-only; | read-only; | ||||
}; | }; | ||||
factory: partition@40000 { | factory: partition@40000 { | ||||
label = "factory"; | label = "factory"; | ||||
reg = <0x40000 0x10000>; | reg = <0x40000 0x10000>; | ||||
}; | }; | ||||
partition@50000 { | partition@50000 { | ||||
label = "firmware"; | label = "firmware"; | ||||
reg = <0x50000 0xf80000>; | reg = <0x50000 0xf80000>; | ||||
}; | }; | ||||
partition@fd0000 { | partition@fd0000 { | ||||
label = "hwf_config"; | label = "hwf_config"; | ||||
reg = <0xfd0000 0x10000>; | reg = <0xfd0000 0x10000>; | ||||
}; | }; | ||||
bdinfo: partition@fe0000 { | bdinfo: partition@fe0000 { | ||||
label = "bdinfo"; | label = "bdinfo"; | ||||
reg = <0xfe0000 0x10000>; | reg = <0xfe0000 0x10000>; | ||||
}; | }; | ||||
partition@ff0000 { | partition@ff0000 { | ||||
label = "backup"; | label = "backup"; | ||||
reg = <0xff0000 0x10000>; | reg = <0xff0000 0x10000>; | ||||
}; | }; | ||||
}; | }; | ||||
}; | }; | ||||
}; | |||||
ehci@101c0000 { | &ehci { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
ohci@101c1000 { | &ohci { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
ethernet@10100000 { | ðernet { | ||||
pinctrl-names = "default"; | pinctrl-names = "default"; | ||||
pinctrl-0 = <&ephy_pins>; | pinctrl-0 = <&ephy_pins>; | ||||
mtd-mac-address = <&factory 0x4>; | mtd-mac-address = <&factory 0x4>; | ||||
mediatek,portmap = "wllll"; | mediatek,portmap = "wllll"; | ||||
}; | }; | ||||
sdhci@10130000 { | &sdhci { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
wmac@10180000 { | &wmac { | ||||
ralink,mtd-eeprom = <&factory 0>; | ralink,mtd-eeprom = <&factory 0>; | ||||
}; | }; | ||||
pcie@10140000 { | &pcie { | ||||
status = "okay"; | status = "okay"; | ||||
}; | }; | ||||
pinctrl { | &pinctrl { | ||||
state_default: pinctrl0 { | state_default { | ||||
gpio { | gpio { | ||||
ralink,group = "uartf", "wled", "nd_sd"; | ralink,group = "uartf", "wled", "nd_sd"; | ||||
ralink,function = "gpio"; | ralink,function = "gpio"; | ||||
}; | }; | ||||
pa { | pa { | ||||
ralink,group = "pa"; | ralink,group = "pa"; | ||||
ralink,function = "pa"; | ralink,function = "pa"; | ||||
}; | |||||
}; | |||||
}; | |||||
gpio-keys-polled { | |||||
compatible = "gpio-keys-polled"; | |||||
#address-cells = <1>; | |||||
#size-cells = <0>; | |||||
poll-interval = <20>; | |||||
reset { | |||||
label = "reset"; | |||||
gpios = <&gpio0 12 1>; | |||||
linux,code = <0x198>; | |||||
}; | |||||
}; | |||||
gpio_export { | |||||
compatible = "gpio-export"; | |||||
#size-cells = <0>; | |||||
usbpower { | |||||
gpio-export,name = "usbpower"; | |||||
gpio-export,output = <1>; | |||||
gpios = <&gpio0 13 0>; | |||||
}; | }; | ||||
}; | }; | ||||
}; | }; |