diff --git a/en/platforms/amd64/motherboards.sgml b/en/platforms/amd64/motherboards.sgml
index 081c0febe9..99ab3f87eb 100644
--- a/en/platforms/amd64/motherboards.sgml
+++ b/en/platforms/amd64/motherboards.sgml
@@ -1,428 +1,429 @@
-
+
%includes;
]>
&header;
On this page we try to collect information about motherboards
for the amd64 architecture and their ability to run FreeBSD.
If a particular motherboard is not listed here, chances are we do not
know about it. Please submit new entries or correction of existing
entries using
send-pr(1)
or web form. Please set category
to www.
Model |
Northbridge Chipset / Socket |
Issues |
Submitter (optional links) |
Tested FreeBSD version |
Special notes |
K8D Master-F (MS-9131) |
AMD 8131/8111 / 2x Socket 940 |
Fully functional |
Guy Helmer |
5.4-RELEASE |
Tested with dual Opteron 242 CPUs. |
K8D Master3-FA4R (MS-9161) |
AMD 8131/8111 / 2x Socket 940 |
Fully functional |
Guy Helmer |
5.4-RELEASE |
Tested with dual Opteron 252 CPUs. SiI SATA interface untested
(used SCSI drive on Adaptec 29160 instead). |
K8N Neo2 Platinum |
nVidia nForce 3 / Socket 939 |
Does not boot with ACPI. |
Roman Divacky |
6-CURRENT (April 2005) |
Broken IRQ tables in BIOS, ACPI does not work, PS/2 keyboard unusable. Boots with ACPI enabled in RELENG_5. |
K8T Master2-FAR |
VIA K8T800 / Socket 940 - 2x Opteron |
Fully functional |
Damian Gerow |
5.4-STABLE |
Picky about memory modules. SMbus does not work. |
K8T Neo-FSR |
VIA K8T800 / Socket 754 |
Fully functional |
Roland Smith |
5.4-STABLE |
|
K8T Neo2-FIR |
VIA K8T800 / Socket 939 |
Fully functional |
Pav Lucistnik (dmesg) |
5.4-STABLE |
BIOS update was needed to recognize memory sticks. |
RS480M2 |
ATI Radeon XPRESS 200 / Socket 939 |
Does not boot with ACPI. |
Torfinn Ingolfsen
(dmesg) |
5.4-STABLE |
Does not boot with ACPI turned on, needs hint.apic.0.disabled="1"
in /boot/loader.conf. Sound not supported, USB not tested. On-board
Radeon graphics chip not supported (only VESA works). |
Model |
Northbridge Chipset / Socket |
Issues |
Submitter (optional links) |
Tested FreeBSD version |
Special notes |
X6DA8-G2 |
Intel E7525 / 2x 604-pin FC-mPGA4 |
Functional |
Erik Power |
5.4-RELEASE |
The default kernel included with the 5.4-RELEASE amd64 distribution does not
see hard drives attached via the Intel ICH5R SATA/ATA controller.
Workaround is to boot using safe mode during install and when booting
default kernel. After compiling a kernel, ata(4) works fine and the
system boots normally. SMP kernel installed and working. LAN, audio,
USB working. ZCR not tested (no driver for Adaptec 2010-S), AIC7902
U320 SCSI not tested. |
X6DHR-8G |
Intel E7520 / 2x 604-pin FC-mPGA4 |
UP kernel must be booted in "safe mode"
(or hint.apic.0.disabled="0"). SMP Functional. |
Guy Helmer |
5.4-RELEASE |
Boots stock SMP kernel. Boots UP with tweak noted in "issues" column
(tried both BIOS revisions 1.2 and 1.2a).
LAN working. UHCI controllers seem to cause interrupt storm.
AIC7902 U320 SCSI operates successfully with Seagate ST373207LC
drives (gives an "Invalid Sequencer interrupt" when probing the SCSI
bus, but then continues).
|
Model |
Northbridge Chipset / Socket |
Issues |
Submitter (optional links) |
Tested FreeBSD version |
Special notes |
Thunder K8QS Pro (S4882) |
AMD 8111/8131 / Socket 940 - 4x Opteron |
Fully functional |
Ketrien I. Saihr-Kesenchedra |
5.2.1-RELEASE, 5.3-RELEASE, 5-STABLE |
Highly unstable with 5.2.1-R. On-board mpt(4) demonstrated problems.
LSI Logic Ultra320-0 ZCR supported by amr(4), stable. Broadcom occasionally
glitches during normal operation if PXE is enabled and unused. Tested to 8GB.
IPMI unavailable for testing. |
Thunder K8S Pro (S2882GNR, S2882UGNR) |
AMD 8111/8131 / Socket 940 - 2x Opteron |
Fully functional |
Ketrien I. Saihr-Kesenchedra |
5.2.1-RELEASE, 5.3-RELEASE, 5-STABLE |
SilIm SATA untested since 5.2.1. Onboard SCSI is aac. Tested
extensively with amr(4). No stability problems. Tested to 8GB
(8x1GB). IPMI Unavailable for testing. |
Thunder K8SR (S2881) |
AMD 8111/8131 / Socket 940 - 2x Opteron |
Fully functional |
Ketrien I. Saihr-Kesenchedra |
5.2.1-RELEASE |
See K8S Pro notes. The K8SR is essentially identical to the K8S Pro.
IPMI unavailable for testing. |
Thunder K8W (S2885) |
AMD 8111/8131/8151 / Socket 940 - 2x Opteron |
Fully functional |
Sean, Marc Olzheim
(dmesg) |
5.4-STABLE, 6-CURRENT |
Running great. |
Thunder K8WE (S2895) |
AMD 8131 / Socket 940 - 2x Opteron |
Functional |
Damian Gerow |
5.3-RELEASE, 5.4-STABLE |
SCSI untested. On-board nVidia ethernet controllers are not
supported by net/nvnet port. ACPI required. |
Tiger K8W (S2875) |
AMD 8111/8131/8151 / Socket 940 - 2x Opteron |
Fully functional |
Ketrien I. Saihr-Kesenchedra |
5.2.1-RELEASE |
SilIm SATA untested. Early BIOS versions have ACPI problems, and may
be incompatible with certain graphics cards. |
Tiger K8WS (S2875S) |
AMD 8111/8131/8151 / Socket 940 - 2x Opteron |
Fully functional |
Ketrien I. Saihr-Kesenchedra |
5.2.1-RELEASE |
SilIm SATA untested. Early BIOS versions have ACPI problems, and may
be incompatible with certain graphics cards. |
Tomcat K8S (S2850G2N, S2850G2NR) |
AMD 8111/8131 / Socket 940 - 1x Opteron |
Fully functional |
Ketrien I. Saihr-Kesenchedra |
5.2.1-RELEASE |
SilIm SATA untested. Only tested to 1GB (2x512MB). |
&footer;