diff --git a/website/content/en/releases/13.1R/relnotes.adoc b/website/content/en/releases/13.1R/relnotes.adoc index 1ec6ff4b29..3cb2d04704 100644 --- a/website/content/en/releases/13.1R/relnotes.adoc +++ b/website/content/en/releases/13.1R/relnotes.adoc @@ -1,429 +1,431 @@ --- title: "FreeBSD 13.1-RELEASE Release Notes" sidenav: download --- :releaseCurrent: 13.1-RELEASE :releaseBranch: 13-STABLE :releasePrev: 13.0-RELEASE :releaseNext: 13.2-RELEASE :releaseType: release include::shared/en/urls.adoc[] = FreeBSD {releaseCurrent} Release Notes :doctype: article :toc: macro :toclevels: 1 :icons: font == Abstract [.abstract-title] The release notes for FreeBSD {releaseCurrent} contain a summary of the changes made to the FreeBSD base system on the {releaseBranch} development line. This document lists applicable security advisories that were issued since the last release, as well as significant changes to the FreeBSD kernel and userland. Some brief remarks on upgrading are also presented. [[intro]] == Introduction This document contains the release notes for FreeBSD {releaseCurrent}. It describes recently added, changed, or deleted features of FreeBSD. It also provides some notes on upgrading from previous versions of FreeBSD. The {releaseType} distribution to which these release notes apply represents the latest point along the {releaseBranch} development branch since {releaseBranch} was created. Information regarding pre-built, binary {releaseType} distributions along this branch can be found at https://www.FreeBSD.org/releases/[https://www.FreeBSD.org/releases/]. The {releaseType} distribution to which these release notes apply represents a point along the {releaseBranch} development branch between {releasePrev} and the future {releaseNext}. Information regarding pre-built, binary {releaseType} distributions along this branch can be found at https://www.FreeBSD.org/releases/[https://www.FreeBSD.org/releases/]. This distribution of FreeBSD {releaseCurrent} is a {releaseType} distribution. It can be found at https://www.FreeBSD.org/releases/[https://www.FreeBSD.org/releases/] or any of its mirrors. More information on obtaining this (or other) {releaseType} distributions of FreeBSD can be found in the link:{handbook}/mirrors[Obtaining FreeBSD appendix] to the link:{handbook}/[FreeBSD Handbook]. All users are encouraged to consult the release errata before installing FreeBSD. The errata document is updated with "late-breaking" information discovered late in the release cycle or after the release. Typically, it contains information on known bugs, security advisories, and corrections to documentation. An up-to-date copy of the errata for FreeBSD {releaseCurrent} can be found on the FreeBSD Web site. This document describes the most user-visible new or changed features in FreeBSD since {releasePrev}. In general, changes described here are unique to the {releaseBranch} branch unless specifically marked as MERGED features. Typical release note items document recent security advisories issued after {releasePrev}, new drivers or hardware support, new commands or options, major bug fixes, or contributed software upgrades. They may also list changes to major ports/packages or release engineering practices. Clearly the release notes cannot list every single change made to FreeBSD between releases; this document focuses primarily on security advisories, user-visible changes, and major architectural improvements. [[upgrade]] == Upgrading from Previous Releases of FreeBSD Binary upgrades between RELEASE versions (and snapshots of the various security branches) are supported using the man:freebsd-update[8] utility. The binary upgrade procedure will update unmodified userland utilities, as well as unmodified GENERIC kernels distributed as a part of an official FreeBSD release. The man:freebsd-update[8] utility requires that the host being upgraded have Internet connectivity. Source-based upgrades (those based on recompiling the FreeBSD base system from source code) from previous versions are supported, according to the instructions in [.filename]#/usr/src/UPDATING#. Users of all powerpc architectures, after successful kernel and world installation, will need to run manually "kldxref /boot/kernel". [IMPORTANT] ==== Upgrading FreeBSD should only be attempted after backing up _all_ data and configuration files. ==== [IMPORTANT] ==== After upgrading, sshd (from OpenSSH 8.8p1) will not accept new connections until it is restarted. After installing the new userland, either reboot (as specified in the source update procedure), or execute `service sshd restart`. ==== //// XXX: gjb will fill this in just before the release is final [[security-errata]] == Security and Errata This section lists the various Security Advisories and Errata Notices since {releasePrev}. [[security]] === Security Advisories [width="100%",cols="40%,30%,30%",options="header",] |=== |Advisory |Date |Topic |link:https://www.freebsd.org/security/advisories/FreeBSD-SA-20:31.icmp6.asc[FreeBSD-SA-20:31.icmp6] |1 December 2020 |Use-after-free in error message handling |=== [[errata]] === Errata Notices [width="100%",cols="40%,30%,30%",options="header",] |=== |Errata |Date |Topic |link:https://www.freebsd.org/security/advisories/FreeBSD-EN-20:19.audit.asc[FreeBSD-EN-20:19.audit] |1 December 2020 |execve/fexecve system call auditing |=== //// [[userland]] == Userland This section covers changes and additions to userland applications, contributed software, and system utilities. [[userland-config]] === Userland Configuration Changes // SAMPLE ENTRY: // A new man:rc.conf[5] variable has been added, `linux_mounts_enable`, which controls if Linux(R)-specific filesystems are mounted in [.filename]#/compat/linux# if `linux_enable` is set to `YES`. {{< revision "364883" >}} (Sponsored by The FreeBSD Foundation) The `-i` flag is now added to man:rtsol[8] and man:rtsold[8] by default in `/etc/defaults/rc.conf`. gitref:a0fc5094bf4c[repository=src] (Sponsored by https://www.patreon.com/cperciva[https://www.patreon.com/cperciva]) [[userland-programs]] === Userland Application Changes The `-i` option has been added to man:rtsol[8] and man:rtsold[8] to disable the random delay between zero and one seconds, speeding up the boot process. gitref:8056b73ea163[repository=src] (Sponsored by https://www.patreon.com/cperciva[https://www.patreon.com/cperciva]) For 64-bit architectures, the base system is now built with Position Independent Executable (PIE) support enabled by default. It may be disabled using the `WITHOUT_PIE` knob. A clean build is required. gitref:396e9f259d96[repository=src] There is a new `zfskeys` man:rc[8] service script, which allows for automatic decryption of ZFS datasets encrypted with ZFS native encryption during boot. See the man:rc.conf[5] manual page for more information. gitref:33ff39796ffe[repository=src], gitref:8719e8a951b7[repository=src] (Sponsored by Modirum and Klara Inc.) The NVMe emulation in man:bhyve[8] has been upgraded to version 1.4 of the NVMe specification. gitref:b7a2cf0d9102[repository=src] - gitref:eae02d959363[repository=src] NVMe iovec construction for large IOs in man:bhyve[8] has been fixed. The problem was exposed by the UEFI driver included with Rocky Linux 8.4. gitref:a7761d19dacd[repository=src] Extra Alt Gr mappings for Brazillian Portuguese ABNT2 keyboards were added. gitref:310623908c20[repository=src] The `chroot` facility now supports unprivileged operation, and the man:chroot[8] program now has a `-n` option to enable its use. gitref:460b4b550dc9[repository=src] (Sponsored by EPSRC) The CAM library has been modified to use man:realpath[3] on device names before parsing them, which allows tools such as man:camcontrol[8] and man:smartctl[8] to be friendlier when symlinks are in use. gitref:e32acf95ea25[repository=src] man:md5sum[1] and similar message-digest programs compatible with those on Linux were added by having the corresponding BSD programs run with the `-r` option if the program name ends in `sum`. gitref:c0d5665be0dc[repository=src] (Sponsored by Netflix) man:svnlite[1] is disabled in the build by default. gitref:a4f99b3c2384[repository=src] man:mpsutil[8] has been extended to show adapter information and to control NCQ. gitref:395bc3598b47[repository=src] Problems after downloading firmware to a device using man:camcontrol[8] were fixed by forcing a rescan of the LUN after the firmware download. gitref:327da43602cc[repository=src] (Sponsored by Netflix) A new mode has been added to the scripted partition editor for variant disk names in man:bsdinstall[8]. If the disk parameter `DEFAULT` is set in place of an actual device name, or no disk is specified for the `PARTITIONS` parameter, the installer will follow the logic used in the automatic-partitioning mode, in which it will either provide a selection dialog for one of several disks if several are present or automatically select it if there is only one. This simplifies the creation of fully-automatic installation media for hardware or VMs with varying disk names. gitref:5ec4eb443e81[repository=src] [[userland-contrib]] === Contributed Software Building of LLDB has been enabled on all powerpc architectures. gitref:cb1bee9bd34[repository=src] One True Awk has been updated to the latest from upstream (20210215). All the FreeBSD patches but one have now been either upstreamed or discarded. Notable changes include: * Locale is no longer used for ranges * Various bugs fixed * Better compatibility with `gawk` and `mawk` The one remaining FreeBSD change, likely to be removed in FreeBSD 14, is that we still allow hex numbers, prefixed with `0x`, to be parsed and interpreted as hex numbers, while all other awks (now including One True Awk) interpret them as `0`, in line with awk's historic behavior. `zlib` has been upgraded to version 1.2.12. `libarchive` has been upgraded to verion 3.6.0 with additional bug and security fixes from the upcoming patchlevel release. Release notes are available at https://github.com/libarchive/libarchive/releases[https://github.com/libarchive/libarchive/releases]. The `ssh` package has been updated to OpenSSH v8.8p1, including a security update and bug fixes. Other updates include these changes: * man:ssh[1]: When prompting whether to record a new host key, accept that key's fingerprint as a synonym for "yes." * man:ssh-keygen[1]: When acting as a CA and signing certificates with an RSA key, default to using the `rsa-sha2-512` signature algorithm. * man:ssh[1]: `UpdateHostkeys` is enabled by default, subject to some conservative preconditions. * man:scp[1]: The behavior of remote to remote copies (e.g. `scp host-a:/path host-b:`) has been changed to transfer through the local host by default. * man:scp[1] has experimental support for transfers using the SFTP protocol as a replacement for the venerable SCP/RCP protocol that it has traditionally used. The use of FIDO/U2F hardware authenticators has been enabled in `ssh`, using the new public key types `ecdsa-sk` and `ed25519-sk`, along with corresponding certificate types. FIDO/U2F support is described in https://www.openssh.com/txt/release-8.2[https://www.openssh.com/txt/release-8.2]. gitref:a613d68fff9a[repository=src] (Sponsored by The FreeBSD Foundation) [[userland-libraries]] === Runtime Libraries and API Assembly optimized code for OpenSSL has been added on powerpc, powerpc64 and powerpc64le. gitref:ce35a3bc852[repository=src] The detection of CPU features accelerating crypto operations for ARMv7 and ARM64 has been fixed, speeding up `aes-256-gcm` and `sha256` substantially. gitref:32a2fed6e71f[repository=src] (Sponsored by Ampere Computing LLC and Klara Inc.) Building ASAN and UBSAN libraries has been enabled on riscv64 and riscv64sf. gitref:8c56b338da7[repository=src] OFED libraries are now built on riscv64 and riscv64sf. gitref:2b978245733[repository=src] OPENMP libraries are now built on riscv64 and riscv64sf. gitref:aaf56e35569[repository=src] [[kernel]] == Kernel This section covers changes to kernel configurations, system tuning, and system control parameters that are not otherwise categorized. [[kernel-general]] === General Kernel Changes Output corruption on serial console on powerpc64 has been fixed. gitref:dca829138ca[repository=src] CAS has been changed to support Radix MMU. gitref:cc8e726c85b[repository=src] Running FreeBSD with HPT superpages enabled on QEMU with TCG has been fixed on powerpc64(le). gitref:f05174ed354[repository=src] Superpages support has been added to pmap_mincore on powerpc64(le). gitref:32b50b8520d[repository=src] HWCAP/HWCAP2 aux args support was added on arm64 for 32-bit ARM binaries. This fixes build/run of golang under `COMPAT32` emulation. gitref:28e22482279f[repository=src] (Sponsored by Rubicon Communications, LLC ("Netgate")) [[drivers]] == Devices and Drivers This section covers changes and additions to devices and device drivers since {releasePrev}. [[drivers-device]] === Device Drivers The man:igc[4] driver was introduced for the Intel I225 Ethernet controller. This controller supports 2.5G/1G/100Mb/10Mb speeds, and allows tx/rx checksum offload, TSO, LRO, and multi-queue operation. gitref:d7388d33b4dd[repository=src] (Sponsored by Rubicon Communications, LLC ("Netgate")) A fix for VGA / HDMI console with AST2500 during boot on powerpc64(le) has been added. gitref:c41d129485e[repository=src] PCI common read/write functions are fixed on big endian targets in man:virtio[4]. gitref:7e583075a41[repository=src], gitref:8d589845881[repository=src] Big-endian support has been added to man:mpr[4]. gitref:7d45bf699dc[repository=src], gitref:2954aedb8e5[repository=src], gitref:c80a1c1072d[repository=src] Max I/O size has been reduced to avoid DMA issues in man:aacraid[4]. gitref:572e3575dba[repository=src] A bug preventing a virtual guest using man:virtio_random[8] from shutting down or rebooting has been fixed. gitref:fa67c45842bb[repository=src] The man:ice[4] driver has been updated to 1.34.2-k, adding firmware logging and initial DCB support. gitref:a0cdf45ea1d1[repository=src] (Sponsored by Intel Corporation) The man:mgb[4] network interface driver has been added, with support for Microchip devices LAN7430 PCIe Gigabit Ethernet controller with PHY and LAN7431 PCIe Gigabit Ethernet controller with RGMII interface. The driver has a number of caveats and limitations, but is functional. gitref:e0262ffbc6ae[repository=src] (Sponsored by The FreeBSD Foundation) Support has been added for link status, media, and VLAN MTU with the man:cdce[4] device. gitref:973fb85188ea[repository=src] The man:iwlwifi[4] driver along with a LinuxKPI 802.11 compatibility layer was added to supplement man:iwm[4] for newer Intel Wireless chipsets. (Sponsored by The FreeBSD Foundation) Kernel crash dumps can now be saved on SD cards and eMMC modules using a `dwmmc` controller when the kernel is configured with the `MMCCAM` option. gitref:79c3478e76c3[repository=src] Kernel crash dumps can now be saved on SD cards using an `sdhci` controller when the kernel is configured with the `MMCCAM` option. gitref:8934d3e7b9b9[repository=src] [[drivers-platform]] === Supported Platforms Support has been added for the HiFive Unmatched RISC-V board. [[storage]] == Storage This section covers changes and additions to file systems and other storage subsystems, both local and networked. [[storage-general]] === General Storage [[storage-zfs]] === ZFS Changes ZFS has been upgraded to OpenZFS release 2.1.4. OpenZFS release notes can be found at https://github.com/openzfs/zfs/releases[https://github.com/openzfs/zfs/releases]. [[storage-nfs]] === NFS Changes Two new daemons, man:rpc.tlsclntd[8] and man:rpc.tlsservd[8], are now built by default on amd64 and arm64. They provide support for NFS-over-TLS as described in the Internet Draft entitled "Towards Remote Procedure Call Encryption By Default". These daemons are built when WITH_OPENSSL_KTLS is specified. They use KTLS to encrypt/decrypt all NFS RPC message traffic, and provide optional verification of machine identity via X.509 certificates. gitref:2c76eebca71b[repository=src] gitref:59f6f5e23c1a[repository=src] The default minor version used for an NFSv4 mount has been changed to the highest minor version supported by the NFSv4 server. This default can be overridden by using the `minorversion` mount option. gitref:8a04edfdcbd2[repository=src] A new NFSv4.1/4.2 mount option `nconnect` has been added that can be used to specify the number of TCP connections that will be used for the mount, up to a maximum of 16. The first (default) TCP connection will be used for all RPCs that consist of small RPC messages. The RPCs that can consist of large RPC messages (Read/Readdir/ReaddirPlus/Write) will be sent on the additional TCP connections in a round-robin fashion. If either the NFS client or NFS server have multiple network interfaces aggregated together, or a network interface that uses multiple queues, this can increase NFS performance for the mount. gitref:9ec7dbf46b0a[repository=src] A sysctl called `vfs.nfsd.srvmaxio` has been added that can be used to increase the NFS server's maximum I/O size from 128Kbytes to any power of 2 up to 1Mbyte. It can only be set when the nfsd threads are not running, and will normally require an increase in `kern.ipc.maxsockbuf` to at least the value recommended by the console log message generated when setting `vfs.nfsd.srvmaxio` is first attempted. gitref:9fb6e613373c[repository=src] [[boot]] == Boot Loader Changes This section covers the boot loader, boot menu, and other boot-related changes. [[boot-loader]] === Boot Loader Changes +UEFI boot is improved for amd64. The loader detects whether the loaded kernel can handle the in-place staging area (non-copying mode). The default is `copy_staging auto`. Auto-detection can be overridden, for example: with `copy_staging enable`, the loader will unconditionally copy the staging area to 2M, regardless of kernel capabilities. Also, the code to grow the staging area is more robust; for growth to occur, it's no longer necessary to hand-tune and recompile the loader. (Sponsored by https://www.freebsdfoundation.org[The FreeBSD Foundation]) + `boot1` and `loader` have been fixed on powerpc64le. gitref:8a62b07bce7[repository=src] [[boot-process]] === Other Boot Changes Performance improvements have been made to man:loader[8], man:nvme[4], man:random[4], man:rtsold[8], and x86 clock calibration, which collectively yield a significant speedup in system boot time. Configuration changes on the EC2 platform provide additional benefits, resulting in {releaseCurrent} booting over twice as fast as {releasePrev}. (Sponsored by https://www.patreon.com/cperciva[https://www.patreon.com/cperciva]) EC2 images are now built by default to boot using UEFI instead of legacy BIOS. Note that UEFI is not supported by Xen-based EC2 instances or by "bare metal" EC2 instances. gitref:65f22ccf8247[repository=src] (Sponsored by https://www.patreon.com/cperciva[https://www.patreon.com/cperciva]) Support was added for recording EC2 AMI Ids in the AWS Systems Manager Parameter Store. FreeBSD will be using the public prefix `/aws/service/freebsd`, resulting in parameter names which look like `/aws/service/freebsd/amd64/base/ufs/13.1/RELEASE`. gitref:242d1c32e42c[repository=src] (Sponsored by https://www.patreon.com/cperciva[https://www.patreon.com/cperciva]) [[network]] == Networking This section describes changes that affect networking in FreeBSD. [[network-general]] === General Network The handling of the lowest address on an IPv4 (sub)net (host 0) has been changed so that packets are not sent as a broadcast unless this address has been set as the broadcast address. This makes the lowest address usable for a host. The old behavior can be restored with the `net.inet.ip.broadcast_lowest` sysctl. See https://datatracker.ietf.org/doc/draft-schoen-intarea-unicast-lowest-address/[https://datatracker.ietf.org/doc/draft-schoen-intarea-unicast-lowest-address/] for background information. gitref:3ee882bf21af[repository=src] [[future-releases]] == General Notes Regarding Future FreeBSD Releases [[future-releases-cputype]] === Default `CPUTYPE` Change Starting with FreeBSD-13.0, the default `CPUTYPE` for the i386 architecture will change from `486` to `686`. This means that, by default, binaries produced will require a 686-class CPU, including but not limited to binaries provided by the FreeBSD Release Engineering team. FreeBSD 13.0 will continue to support older CPUs, however users needing this functionality will need to build their own releases for official support. As the primary use for i486 and i586 CPUs is generally in the embedded market, the general end-user impact is expected to be minimal, as new hardware with these CPU types has long faded, and much of the deployed base of such systems is nearing retirement age, statistically. There were several factors taken into account for this change. For example, i486 does not have 64-bit atomics, and while they can be emulated in the kernel, they cannot be emulated in the userland. Additionally, the 32-bit amd64 libraries have been i686 since their inception. As the majority of 32-bit testing is done by developers using the lib32 libraries on 64-bit hardware with the `COMPAT_FREEBSD32` option in the kernel, this change ensures better coverage and user experience. This also aligns with what the majority of Linux(R) distributions have been doing for quite some time. This is expected to be the final bump of the default `CPUTYPE` in i386. [IMPORTANT] ==== This change does not affect the FreeBSD 12.x series of releases. ====