diff --git a/en/releases/3.5R/notes.sgml b/en/releases/3.5R/notes.sgml index 6e17f2d24b..449495c547 100644 --- a/en/releases/3.5R/notes.sgml +++ b/en/releases/3.5R/notes.sgml @@ -1,653 +1,653 @@ - + %includes; ]> &header; 
                   RELEASE NOTES - FREEBSD 3.5-RELEASE
 
 Welcome to 3.5-RELEASE, a full follow-on to 3.4-RELEASE which was
 shipped in December 1999.  In the months since 3.4 was released, many
 bug fixes and general enhancements have been made to the system.  Please
 see relevant details below.
 
 Any installation failures or crashes should be reported by using the
 send-pr command (those preferring a WEB based interface can also see
 http://www.freebsd.org/send-pr.html).
 
 For information about FreeBSD and the layout of the 3.5-RELEASE
 directory (especially if you're installing from floppies!), see
 ABOUT.TXT.  For installation instructions, see the INSTALL.TXT and
 HARDWARE.TXT files.
 
 Table of contents:
 ------------------
 1. What's new since 3.4-RELEASE
    1.1 KERNEL CHANGES
    1.2 SECURITY FIXES
    1.3 USERLAND CHANGES
 
 2. Supported Configurations
    2.1 Disk Controllers
    2.2 Ethernet cards
    2.3 ATM
    2.4 Misc
 
 3. Obtaining FreeBSD
    3.1 FTP/Mail
    3.2 CDROM
 
 4. Upgrading from previous releases of FreeBSD
 
 5. Reporting problems, making suggestions, submitting code
 
 6. Acknowledgments
 
 
 1. What's new since 3.4-RELEASE
 ---------------------------------
 
 1.1. KERNEL CHANGES
 -------------------
 
 The loader was substantially updated from -current
 
 Various bugs in the CAM driver fixed.
 
 oltr [Olicom NIC] driver updated.
 
 bktr(4) [Brooktree frame-grabber] driver updated.
 
 isp(4) [Compaq Qlogic] driver updated.
 
 sym(4) [NCR/Symbios SCSI controller] driver updated.
 
 A number of bugs in syscons(4) fixed.
 
 A number of bugs in vinum(4) fixed.
 
 Better support for LBA in wd(4) driver.
 
 Audio mixer(8) support substantially updated.
 
 Support for Microsoft Sound Source (MSS) audio devices.
 
 Support for more Linux system calls in the Linux compatability code.
 
 netgraph(4) updated: new node types and documentation added.
 
 Various bugs in msdosfs code fixed.
 
 
 1.2. SECURITY CHANGES
 ---------------------
 
 Many small but meaningful changes, too many to list.  See CVS repository
 for more details.  Suffice it to say from a user perspective that
 "various things were tightened up."
 
 
 1.3. USERLAND CHANGES
 ---------------------
 
 vinum(8) substantially updated.
 
 chmod(1) has gained a -v flag.  See man page for details.
 
 df(1) gains new unit types.  See man page for details.
 
 Various bugs in date(1), ed(1), ln(1), sh(1), camcontrol(8), vinum(8)
 and quite a number of other user commands fixed (see CVS for details :).
 
 groff(1), grep(1) texinfo(1) utilities updated.
 
 Quite a few enhancements to /etc from -current merged.
 
 Many doc bugs fixed in man pages.
 
 Thread locking functions added to dynamic linker (see dllockinit(3)).
 
 pthread_cancel(3) function added.
 
 ppp(8) has undergone some changes and bug fixes.  One change in particular
 may disturb existing configurations.  The # character is now treated
 as a comment start, irrespective of whether it's the first non-blank
 character on the line.  Some ISPs allocate authnames with embedded #
 characters.  These must now be escaped or quoted.
 
 picobsd support (/usr/src/release/picobsd) substantially updated.
 
 HTTP installation option added to system installer (sysinstall(8)).
 
 XFree86 updated from 3.3.5 to 3.3.6 (XFree86 4.0 not quite ready for
 prime-time yet).
 
 
 2. Supported Configurations
 ---------------------------
 FreeBSD currently runs on a wide variety of ISA, VLB, EISA and PCI bus
 based PC's, ranging from 386sx to Pentium class machines (though the
 386sx is not recommended).  Support for generic IDE or ESDI drive
 configurations, various SCSI controller, network and serial cards is
 also provided.
 
 What follows is a list of all peripherals currently known to work with
 FreeBSD.  Other configurations may also work, we have simply not as yet
 received confirmation of this.
 
 
 2.1. Disk Controllers
 ---------------------
 WD1003 (any generic MFM/RLL)
 WD1007 (any generic IDE/ESDI)
 IDE
 ATA
 
 Adaptec 1535 ISA SCSI controllers
 Adaptec 154x series ISA SCSI controllers
 Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
-Adaptec 274X/284X/2920C/294x/2950/3.50/3950 (Narrow/Wide/Twin) series
+Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
 EISA/VLB/PCI SCSI controllers.
 Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
 Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
 Adaptec 152x series ISA SCSI controllers
 Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
 and SoundBlaster SCSI cards.
 
 AdvanSys SCSI controllers (all models).
 
 BusLogic MultiMaster controllers:
 
 [ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
 
 BusLogic MultiMaster "W" Series Host Adapters:
     BT-948, BT-958, BT-958D
 BusLogic MultiMaster "C" Series Host Adapters:
     BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
     BT-540CF
 BusLogic MultiMaster "S" Series Host Adapters:
     BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
     BT-542B
 BusLogic MultiMaster "A" Series Host Adapters:
     BT-742A, BT-542B
 
 AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
 supported.
 
 DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
 SmartRAID IV SCSI/RAID controllers are supported.  The DPT SmartRAID/CACHE V
 is not yet supported.
 
 SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
 53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
         ASUS SC-200
         Data Technology DTC3130 (all variants)
         Diamond FirePort (all)
         NCR cards (all)
         Symbios cards (all)
         Tekram DC390W, 390U and 390F
         Tyan S1365
 
 
 QLogic 1020, 1040, 1040B, 1080 and 1240 SCSI Host Adapters.
 QLogic 2100 Fibre Channel Adapters (private loop only).
 
 DTC 3290 EISA SCSI controller in 1542 emulation mode.
 
 With all supported SCSI controllers, full support is provided for
 SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
 tape drives (including DAT and 8mm Exabyte), medium changers, processor
 target devices and CDROM drives.  WORM devices that support CDROM commands
 are supported for read-only access by the CDROM driver.  WORM/CD-R/CD-RW
 writing support is provided by cdrecord, which is in the ports tree.
 
 The following CD-ROM type systems are supported at this time:
 (cd)    SCSI interface (also includes ProAudio Spectrum and
         SoundBlaster SCSI)
 (matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
         interface (562/563 models)
 (scd)   Sony proprietary interface (all models)
 (wcd)   ATAPI IDE interface
 
 The following drivers were supported under the old SCSI subsystem, but are
 NOT YET supported under the new CAM SCSI subsystem:
 
   NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller. 
 
   UltraStor 14F, 24F and 34F SCSI controllers.
 
   Seagate ST01/02 SCSI controllers.
 
   Future Domain 8xx/950 series SCSI controllers.
 
   WD7000 SCSI controller.
 
   [ Note:  There is work-in-progress to port the UltraStor driver to 
     the new CAM SCSI framework, but no estimates on when or if it will 
     be completed. ]
 
 Unmaintained drivers, they might or might not work for your hardware:
 
   Floppy tape interface (Colorado/Mountain/Insight)
 
   (mcd)   Mitsumi proprietary CD-ROM interface (all models)
 
 2.2. Ethernet cards
 -------------------
 
 Adaptec Duralink PCI fast Ethernet adapters based on the Adaptec
 AIC-6915 fast Ethernet controller chip, including the following:
   ANA-62011 64-bit single port 10/100-BaseTX adapter
   ANA-62022 64-bit dual port 10/100-BaseTX adapter
   ANA-62044 64-bit quad port 10/100-BaseTX adapter
   ANA-69011 32-bit single port 10/100-BaseTX adapter
   ANA-62020 64-bit single port 100-BaseFX adapter
 
 Allied-Telesis AT1700 and RE2000 cards
 
 Alteon Networks PCI gigabit Ethernet NICs based on the Tigon 1 and Tigon 2
 chipsets, including the following:
   Alteon AceNIC (Tigon 1 and 2)
   3Com 3c985-SX (Tigon 1 and 2)
   Netgear GA620 (Tigon 2)
   Silicon Graphics Gigabit Ethernet
   DEC/Compaq EtherWORKS 1000
   NEC Gigabit Ethernet
 
 AMD PCnet/PCI (79c970 & 53c974 or 79c974)
 
 SMC Elite 16 WD8013 Ethernet interface, and most other WD8003E,
 WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
 based clones.  SMC Elite Ultra.  SMC Etherpower II.
 
 RealTek 8129/8139 fast Ethernet NICs including the following:
   Allied Telesyn AT2550
   Allied Telesyn AT2500TX
   Genius GF100TXR (RTL8139)
   NDC Communications NE100TX-E
   OvisLink LEF-8129TX
   OvisLink LEF-8139TX
   Netronix Inc. EA-1210 NetEther 10/100
   KTX-9130TX 10/100 Fast Ethernet
   Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?)
   SMC EZ Card 10/100 PCI 1211-TX
 
 Lite-On 82c168/82c169 PNIC fast Ethernet NICs including the following:
   LinkSys EtherFast LNE100TX
   NetGear FA310-TX Rev. D1
   Matrox FastNIC 10/100
   Kingston KNE110TX
 
 Macronix 98713, 98713A, 98715, 98715A and 98725 fast Ethernet NICs
   NDC Communications SFA100A (98713A)
   CNet Pro120A (98713 or 98713A)
   CNet Pro120B (98715)
   SVEC PN102TX (98713)
 
 Macronix/Lite-On PNIC II LC82C115 fast Ethernet NICs including the following:
   LinkSys EtherFast LNE100TX Version 2
 
 Winbond W89C840F fast Ethernet NICs including the following:
   Trendware TE100-PCIE
 
-VIA Technologies VT3.53 "Rhine I" and VT86C100A "Rhine II" fast Ethernet
+VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast Ethernet
 NICs including the following:
   Hawking Technologies PN102TX
   D-Link DFE530TX
 
 Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet NICs.
 
 Sundance Technologies ST201 PCI fast ethernet NICs including
 the following:
   D-Link DFE-550TX
 
 SysKonnect SK-984x PCI gigabit Ethernet cards including the following:
   SK-9841 1000baseLX single mode fiber, single port
   SK-9842 1000baseSX multi-mode fiber, single port
   SK-9843 1000baseLX single mode fiber, dual port
   SK-9844 1000baseSX multi-mode fiber, dual port
   
 Texas Instruments ThunderLAN PCI NICs, including the following:
   Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
   Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
   Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
   Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
   Racore 8165 10/100-BaseTX
   Racore 8148 10-BaseT/100-BaseTX/100-BaseFX multi-personality
 
 ADMtek Inc. AL981-based PCI fast Ethernet NICs
 ADMtek Inc. AN985-based PCI fast Ethernet NICs
 
 ASIX Electronics AX88140A PCI NICs, including the following:
   Alfa Inc. GFC2204
   CNet Pro110B
 
 DEC EtherWORKS III NICs (DE203, DE204, and DE205)
 DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
 DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
 DEC FDDI (DEFPA/DEFEA) NICs
 
 Fujitsu MB86960A/MB86965A
 
 HP PC Lan+ cards (model numbers: 27247B and 27252A).
 
 Intel EtherExpress 16
 Intel EtherExpress Pro/10
 Intel EtherExpress Pro/100B PCI Fast Ethernet
 
 Isolan AT 4141-0 (16 bit)
 Isolink 4110     (8 bit)
 
 Novell NE1000, NE2000, and NE2100 Ethernet interface.
 
 PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
 Winbond W89C940, Surecom NE-34, VIA VT86C926.
 
 3Com 3C501 cards
 
 3Com 3C503 Etherlink II
 
 3Com 3c505 Etherlink/+
 
 3Com 3C507 Etherlink 16/TP
 
 3Com 3C509, 3C579, 3C589 (PCMCIA), 3C590/592/595/900/905/905B/905C PCI
 and EISA (Fast) Etherlink III / (Fast) Etherlink XL
 
 3Com 3c980/3c980B Fast Etherlink XL server adapter
 
 3Com 3cSOHO100-TX OfficeConnect adapter
 
 Toshiba Ethernet cards
 
 Crystal Semiconductor CS89x0-based NICs, including:
   IBM Etherjet ISA
 
 PCMCIA Etherjet cards from IBM and National Semiconductor are also
 supported.
 
 
 2.3 ATM
 -------
 
    o ATM Host Interfaces
         - FORE Systems, Inc. PCA-200E ATM PCI Adapters
         - Efficient Networks, Inc. ENI-155p ATM PCI Adapters
 
    o ATM Signaling Protocols
         - The ATM Forum UNI 3.1 signaling protocol
         - The ATM Forum UNI 3.0 signaling protocol
         - The ATM Forum ILMI address registration
         - FORE Systems's proprietary SPANS signaling protocol
         - Permanent Virtual Channels (PVCs)
 
    o IETF "Classical IP and ARP over ATM" model
         - RFC 1483, "Multi-protocol Encapsulation over ATM Adaptation Layer 5"
         - RFC 1577, "Classical IP and ARP over ATM"
         - RFC 1626, "Default IP MTU for use over ATM AAL5"
         - RFC 1755, "ATM Signaling Support for IP over ATM"
         - RFC 2225, "Classical IP and ARP over ATM"
-        - RFC 23.5, "Server Cache Synchronization Protocol (SCSP)"
+        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
         - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                 "A Distributed ATMARP Service Using SCSP"
 
    o ATM Sockets interface
 
 2.4. Misc
 ---------
 
 AST 4 port serial card using shared IRQ.
 
 ARNET 8 port serial card using shared IRQ.
 ARNET (now Digiboard) Sync 570/i high-speed serial.
 
 Boca BB1004 4-Port serial card (Modems NOT supported)
 Boca IOAT66 6-Port serial card (Modems supported)
 Boca BB1008 8-Port serial card (Modems NOT supported)
 Boca BB2016 16-Port serial card (Modems supported)
 
 Comtrol Rocketport card.
 
 Cyclades Cyclom-y Serial Board.
 
 STB 4 port card using shared IRQ.
 
 SDL Communications Riscom/8 Serial Board.
 SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
 
 Stallion multi-port serial boards: EasyIO, EasyConnection 8/32 & 8/64,
 ONboard 4/16 and Brumby.
 
 Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules.
 
 Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
 and Roland MPU-401 sound cards. (snd driver)
 
 Most ISA audio codecs manufactured by Crystal Semiconductors, OPTi, Creative
 Labs, Avance, Yamaha and ENSONIQ. (pcm driver)
 
 Connectix QuickCam
 Matrox Meteor Video frame grabber
 Creative Labs Video Spigot frame grabber
 Cortex1 frame grabber
 Hauppauge Wincast/TV boards (PCI)
 STB TV PCI
 Intel Smart Video Recorder III
 Various Frame grabbers based on Brooktree Bt848 / Bt878 chip.
 
 HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
 
 PS/2 mice
 
 Standard PC Joystick
 
 X-10 power controllers
 
 GPIB and Transputer drivers.
 
 Genius and Mustek hand scanners.
 
 Xilinx XC6200 based reconfigurable hardware cards compatible with
 the HOT1 from Virtual Computers (www.vcc.com)
 
 Support for Dave Mills experimental Loran-C receiver.
 
 Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
 (2Mbps) and turbo speed (6Mbps) wireless network adapters and work-a-likes
 (NCR WaveLAN/IEEE 802.11, Cabletron RoamAbout 802.11 DS). Note: the
 ISA versions of these adapters are actually PCMCIA cards combined with
 an ISA to PCMCIA bridge card, so both kinds of devices work with
 the same driver.
 
 FreeBSD currently does NOT support IBM's microchannel (MCA) bus.
 
 3. Obtaining FreeBSD
 --------------------
 
 You may obtain FreeBSD in a variety of ways:
 
 3.1. FTP/Mail
 -------------
 
 You can ftp FreeBSD and any or all of its optional packages from
 `ftp.freebsd.org' - the official FreeBSD release site.
 
 For other locations that mirror the FreeBSD software see the file
 MIRROR.SITES.  Please ftp the distribution from the site closest (in
 networking terms) to you.  Additional mirror sites are always welcome!
 Contact freebsd-admin@FreeBSD.org for more details if you'd like to 
 become an official mirror site.
 
 If you do not have access to the Internet and electronic mail is your
 only recourse, then you may still fetch the files by sending mail to
 `ftpmail@ftpmail.vix.com' - putting the keyword "help" in your message
 to get more information on how to fetch files using this mechanism.
 Please do note, however, that this will end up sending many *tens of
 megabytes* through the mail and should only be employed as an absolute
 LAST resort!
 
 
 3.2. CDROM
 ----------
 
 FreeBSD 3.5-RELEASE CDs may be ordered on CDROM from:
 
         Walnut Creek CDROM
         4041 Pike Lane, Suite F
         Concord CA  94520
         1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX)
 
 Or via the Internet from orders@cdrom.com or http://www.cdrom.com.
 Their current catalog can be obtained via ftp from:
 
         ftp://ftp.cdrom.com/cdrom/catalog
 
 Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription.
 FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a
 FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely
 separate).  With a subscription, you will automatically receive updates as
 they are released.  Your credit card will be billed when each disk is
 shipped and you may cancel your subscription at any time without further
 obligation.
 
 Shipping (per order not per disc) is $5 in the US, Canada or Mexico
 and $9.00 overseas.  They accept Visa, Mastercard, Discover, American
 Express or checks in U.S. Dollars and ship COD within the United
 States.  California residents please add 8.25% sales tax.
 
 Should you be dissatisfied for any reason, the CD comes with an
 unconditional return policy.
 
 
 4. Upgrading from previous releases of FreeBSD
 ----------------------------------------------
 
 If you're upgrading from a previous release of FreeBSD, most likely
 it's 2.2.x or 2.1.x (in some lesser number of cases) and some of the
 following issues may affect you, depending of course on your chosen
 method of upgrading.  There are two popular ways of upgrading
 FreeBSD distributions:
 
         o Using sources, via /usr/src
         o Using sysinstall's (binary) upgrade option.
 
 In the case of using sources, there are simply two targets you need to
 be aware of: The standard ``upgrade'' target, which will upgrade a 2.x
 or 3.0 system to 3.5 and the ``world'' target, which will take an
 already upgraded system and keep it in sync with whatever changes have
 happened since the initial upgrade.
 
 In the case of using the binary upgrade option, the system will go
 straight to 3.5/ELF but also populate the /<basepath>/lib/aout
 directories for backwards compatibility with older binaries.
 
 In either case, going to ELF will mean that you'll have somewhat
 smaller binaries and access to a lot more compiler goodies which have
 been already been ported to other ELF environments (our older and
 somewhat crufty a.out format being largely unsupported by most other
 software projects).  Those who wish to retain access to the older
 a.out dynamic executables should be sure and install the compat22
 distribution. Notice that the a.out libraries won't be accessible
 until the system is rebooted, which may cause trouble with certain
 a.out packages.
 
 Also, do not use install disks or sysinstall from previous versions,
 as version 3.1 introduced a new bootstrapping procedure, requiring
 new boot blocks to be installed (because of elf kernels), and version
 3.2 has further modifications to the bootstrapping procedure.
 
 [ other important upgrading notes should go here]
 
 
 5. Reporting problems, making suggestions, submitting code.
 -----------------------------------------------------------
 Your suggestions, bug reports and contributions of code are always
 valued - please do not hesitate to report any problems you may find
 (preferably with a fix attached, if you can!).
 
 The preferred method to submit bug reports from a machine with
 Internet mail connectivity is to use the send-pr command or use the CGI
 script at http://www.freebsd.org/send-pr.html.  Bug reports
 will be dutifully filed by our faithful bugfiler program and you can
 be sure that we'll do our best to respond to all reported bugs as soon
 as possible.  Bugs filed in this way are also visible on our WEB site
 in the support section and are therefore valuable both as bug reports
 and as "signposts" for other users concerning potential problems to
 watch out for.
 
 If, for some reason, you are unable to use the send-pr command to
 submit a bug report, you can try to send it to:
 
                 freebsd-bugs@FreeBSD.org
 
 Note that send-pr itself is a shell script that should be easy to move
 even onto a totally different system.  We much prefer if you could use
 this interface, since it make it easier to keep track of the problem
 reports.  However, before submitting, please try to make sure whether
 the problem might have already been fixed since.
 
 
 Otherwise, for any questions or tech support issues, please send mail to:
 
                 freebsd-questions@FreeBSD.org
 
 
 Additionally, being a volunteer effort, we are always happy to have
 extra hands willing to help - there are already far more desired
 enhancements than we'll ever be able to manage by ourselves!  To
 contact us on technical matters, or with offers of help, please send
 mail to:
 
                 freebsd-hackers@FreeBSD.org
 
 
 Please note that these mailing lists can experience *significant*
 amounts of traffic and if you have slow or expensive mail access and
 are only interested in keeping up with significant FreeBSD events, you
 may find it preferable to subscribe instead to:
 
                 freebsd-announce@FreeBSD.org
 
 
 All of the mailing lists can be freely joined by anyone wishing
 to do so.  Send mail to MajorDomo@FreeBSD.org and include the keyword
 `help' on a line by itself somewhere in the body of the message.  This
 will give you more information on joining the various lists, accessing
 archives, etc.  There are a number of mailing lists targeted at
 special interest groups not mentioned here, so send mail to majordomo
 and ask about them!
 
 
 6. Acknowledgments
 -------------------
 
 FreeBSD represents the cumulative work of many dozens, if not
 hundreds, of individuals from around the world who have worked very
 hard to bring you this release.  For a complete list of FreeBSD
 project staffers, please see:
 
         http://www.freebsd.org/handbook/staff.html
 
 or, if you've loaded the doc distribution:
 
         file:/usr/share/doc/handbook/staff.html
 
 
 Special mention to:
 
         The donors listed at http://www.freebsd.org/handbook/donors.html
 
         And to the many thousands of FreeBSD users and testers all over the
         world, without whom this release simply would not have been possible.
 
 We sincerely hope you enjoy this release of FreeBSD!
 
                         The FreeBSD Project

Release Home &footer;