diff --git a/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml b/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml index cde280cb70..4d36f826c4 100644 --- a/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml @@ -1,3588 +1,3588 @@ Obtaining FreeBSD CD-ROM Publishers FreeBSD is available on CD-ROM from Walnut Creek CDROM:
Walnut Creek CDROM 4041 Pike Lane, Suite F Concord CA, 94520 USA Phone: +1 925 674-0783 Fax: +1 925 674-0821 Email: info@cdrom.com WWW: http://www.cdrom.com/
FTP Sites The official sources for FreeBSD are available via anonymous FTP from:
ftp://ftp.FreeBSD.org/pub/FreeBSD/.
The FreeBSD mirror sites database is more accurate than the mirror listing in the handbook, as it gets its information form the DNS rather than relying on static lists of hosts. Additionally, FreeBSD is available via anonymous FTP from the following mirror sites. If you choose to obtain FreeBSD via anonymous FTP, please try to use a site near you. Argentina, Australia, Brazil, Canada, China, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea, Netherlands, New Zealand, Poland, Portugal, Russia, Saudi Arabia, South Africa, Spain, Slovak Republic, Slovenia, Sweden, Taiwan, Thailand, UK, Ukraine, USA. Argentina In case of problems, please contact the hostmaster hostmaster@ar.FreeBSD.org for this domain. ftp://ftp.ar.FreeBSD.org/pub/FreeBSD/ Australia In case of problems, please contact the hostmaster hostmaster@au.FreeBSD.org for this domain. ftp://ftp.au.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.au.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.au.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.au.FreeBSD.org/pub/FreeBSD/ Brazil In case of problems, please contact the hostmaster hostmaster@br.FreeBSD.org for this domain. ftp://ftp.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp7.br.FreeBSD.org/pub/FreeBSD/ Canada In case of problems, please contact the hostmaster hostmaster@ca.FreeBSD.org for this domain. ftp://ftp.ca.FreeBSD.org/pub/FreeBSD/ China In case of problems, please contact the hostmaster phj@cn.FreeBSD.org for this domain. ftp://ftp.cn.FreeBSD.org/pub/FreeBSD/ Czech Republic In case of problems, please contact the hostmaster hostmaster@cz.FreeBSD.org for this domain. ftp://ftp.cz.FreeBSD.org/pub/FreeBSD/ Contact: calda@dzungle.ms.mff.cuni.cz Denmark In case of problems, please contact the hostmaster hostmaster@dk.FreeBSD.org for this domain. ftp://ftp.dk.FreeBSD.org/pub/FreeBSD/ Estonia In case of problems, please contact the hostmaster hostmaster@ee.FreeBSD.org for this domain. ftp://ftp.ee.FreeBSD.org/pub/FreeBSD/ Finland In case of problems, please contact the hostmaster hostmaster@fi.FreeBSD.org for this domain. ftp://ftp.fi.FreeBSD.org/pub/FreeBSD/ France In case of problems, please contact the hostmaster hostmaster@fr.FreeBSD.org for this domain. ftp://ftp.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp1.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp1.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp2.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp2.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp3.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp3.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp4.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp4.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp5.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp5.fr.FreeBSD.org/pub/FreeBSD/ Germany In case of problems, please contact the mirror admins de-bsd-hubs@de.FreeBSD.org for this domain. ftp://ftp.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp7.de.FreeBSD.org/pub/FreeBSD/ Hong Kong ftp://ftp.hk.super.net/pub/FreeBSD/ Contact: ftp-admin@HK.Super.NET. Ireland In case of problems, please contact the hostmaster hostmaster@ie.FreeBSD.org for this domain. ftp://ftp.ie.FreeBSD.org/pub/FreeBSD/ Israel In case of problems, please contact the hostmaster hostmaster@il.FreeBSD.org for this domain. ftp://ftp.il.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.il.FreeBSD.org/pub/FreeBSD/ Japan In case of problems, please contact the hostmaster hostmaster@jp.FreeBSD.org for this domain. ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.jp.FreeBSD.org/pub/FreeBSD/ Korea In case of problems, please contact the hostmaster hostmaster@kr.FreeBSD.org for this domain. ftp://ftp.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.kr.FreeBSD.org/pub/FreeBSD/ Netherlands In case of problems, please contact the hostmaster hostmaster@nl.FreeBSD.org for this domain. ftp://ftp.nl.FreeBSD.org/pub/FreeBSD/ New Zealand In case of problems, please contact the hostmaster hostmaster@nz.FreeBSD.org for this domain. ftp://ftp.nz.FreeBSD.org/pub/FreeBSD/ Poland In case of problems, please contact the hostmaster hostmaster@pl.FreeBSD.org for this domain. ftp://ftp.pl.FreeBSD.org/pub/FreeBSD/ Portugal In case of problems, please contact the hostmaster hostmaster@pt.FreeBSD.org for this domain. ftp://ftp.pt.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.pt.FreeBSD.org/pub/FreeBSD/ Russia In case of problems, please contact the hostmaster hostmaster@ru.FreeBSD.org for this domain. ftp://ftp.ru.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.ru.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.ru.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.ru.FreeBSD.org/pub/FreeBSD/ Saudi Arabia In case of problems, please contact ftpadmin@isu.net.sa ftp://ftp.isu.net.sa/pub/mirrors/ftp.freebsd.org/ South Africa In case of problems, please contact the hostmaster hostmaster@za.FreeBSD.org for this domain. ftp://ftp.za.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.za.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.za.FreeBSD.org/FreeBSD/ Slovak Republic In case of problems, please contact the hostmaster hostmaster@sk.FreeBSD.org for this domain. ftp://ftp.sk.FreeBSD.org/pub/FreeBSD/ Slovenia In case of problems, please contact the hostmaster hostmaster@si.FreeBSD.org for this domain. ftp://ftp.si.FreeBSD.org/pub/FreeBSD/ Spain In case of problems, please contact the hostmaster hostmaster@es.FreeBSD.org for this domain. ftp://ftp.es.FreeBSD.org/pub/FreeBSD/ Sweden In case of problems, please contact the hostmaster hostmaster@se.FreeBSD.org for this domain. ftp://ftp.se.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.se.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.se.FreeBSD.org/pub/FreeBSD/ Taiwan In case of problems, please contact the hostmaster hostmaster@tw.FreeBSD.org for this domain. ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.tw.FreeBSD.org/pub/FreeBSD/ Thailand ftp://ftp.nectec.or.th/pub/FreeBSD/ Contact: ftpadmin@ftp.nectec.or.th. Ukraine ftp://ftp.ua.FreeBSD.org/pub/FreeBSD/ Contact: freebsd-mnt@lucky.net. UK In case of problems, please contact the hostmaster hostmaster@uk.FreeBSD.org for this domain. ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.uk.FreeBSD.org/pub/FreeBSD/ USA In case of problems, please contact the hostmaster hostmaster@FreeBSD.org for this domain. ftp://ftp.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.FreeBSD.org/pub/FreeBSD/ Anonymous CVS <anchor id="anoncvs-intro">Introduction Anonymous CVS (or, as it is otherwise known, anoncvs) is a feature provided by the CVS utilities bundled with FreeBSD for synchronizing with a remote CVS repository. Among other things, it allows users of FreeBSD to perform, with no special privileges, read-only CVS operations against one of the FreeBSD project's official anoncvs servers. To use it, one simply sets the CVSROOT environment variable to point at the appropriate anoncvs server, provides the well-known password anoncvs with the cvs login command, and then uses the &man.cvs.1; command to access it like any local repository. While it can also be said that the CVSup and anoncvs services both perform essentially the same function, there are various trade-offs which can influence the user's choice of synchronization methods. In a nutshell, CVSup is much more efficient in its usage of network resources and is by far the most technically sophisticated of the two, but at a price. To use CVSup, a special client must first be installed and configured before any bits can be grabbed, and then only in the fairly large chunks which CVSup calls collections. Anoncvs, by contrast, can be used to examine anything from an individual file to a specific program (like ls or grep) by referencing the CVS module name. Of course, anoncvs is also only good for read-only operations on the CVS repository, so if it's your intention to support local development in one repository shared with the FreeBSD project bits then CVSup is really your only option. <anchor id="anoncvs-usage">Using Anonymous CVS Configuring &man.cvs.1; to use an Anonymous CVS repository is a simple matter of setting the CVSROOT environment variable to point to one of the FreeBSD project's anoncvs servers. At the time of this writing, the following servers are available: USA: :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs (Use cvs login and enter the password anoncvs when prompted.) Since CVS allows one to check out virtually any version of the FreeBSD sources that ever existed (or, in some cases, will exist :-), you need to be familiar with the revision () flag to &man.cvs.1; and what some of the permissible values for it in the FreeBSD Project repository are. There are two kinds of tags, revision tags and branch tags. A revision tag refers to a specific revision. Its meaning stays the same from day to day. A branch tag, on the other hand, refers to the latest revision on a given line of development, at any given time. Because a branch tag does not refer to a specific revision, it may mean something different tomorrow than it means today. Here are the branch tags that users might be interested in (keep in mind that the only tags valid for the ports collection is HEAD). HEAD Symbolic name for the main line, or FreeBSD-CURRENT. Also the default when no revision is specified. RELENG_4 The line of development for FreeBSD-4.X, also known as FreeBSD-STABLE. RELENG_3 The line of development for FreeBSD-3.X, also known as 3.X-STABLE. RELENG_2_2 The line of development for FreeBSD-2.2.X, also known as 2.2-STABLE. This branch is mostly obsolete. Here are the revision tags that users might be interested in. Again, none of these are valid for the ports collection since the ports collection does not have multiple revisions. RELENG_4_0_0_RELEASE FreeBSD 4.0. RELENG_3_4_0_RELEASE FreeBSD-3.4. RELENG_3_3_0_RELEASE FreeBSD-3.3. RELENG_3_2_0_RELEASE FreeBSD-3.2. RELENG_3_1_0_RELEASE FreeBSD-3.1. RELENG_3_0_0_RELEASE FreeBSD-3.0. RELENG_2_2_8_RELEASE FreeBSD-2.2.8. RELENG_2_2_7_RELEASE FreeBSD-2.2.7. RELENG_2_2_6_RELEASE FreeBSD-2.2.6. RELENG_2_2_5_RELEASE FreeBSD-2.2.5. RELENG_2_2_2_RELEASE FreeBSD-2.2.2. RELENG_2_2_1_RELEASE FreeBSD-2.2.1. RELENG_2_2_0_RELEASE FreeBSD-2.2.0. When you specify a branch tag, you normally receive the latest versions of the files on that line of development. If you wish to receive some past version, you can do so by specifying a date with the flag. See the &man.cvs.1; man page for more details. Examples While it really is recommended that you read the manual page for &man.cvs.1; thoroughly before doing anything, here are some quick examples which essentially show how to use Anonymous CVS: Checking out something from -CURRENT (&man.ls.1;) and deleting it again: &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs co ls &prompt.user; cvs release -d ls &prompt.user; cvs logout Checking out the version of &man.ls.1; in the 3.X-STABLE branch: &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs co -rRELENG_3 ls &prompt.user; cvs release -d ls &prompt.user; cvs logout Creating a list of changes (as unified diffs) to &man.ls.1; &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs rdiff -u -rRELENG_3_0_0_RELEASE -rRELENG_3_4_0_RELEASE ls &prompt.user; cvs logout Finding out what other module names can be used: &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs co modules &prompt.user; more modules/modules &prompt.user; cvs release -d modules &prompt.user; cvs logout Other Resources The following additional resources may be helpful in learning CVS: CVS Tutorial from Cal Poly. Cyclic Software, commercial maintainers of CVS. CVSWeb is the FreeBSD Project web interface for CVS. Using CTM CTM is a method for keeping a remote directory tree in sync with a central one. It has been developed for usage with FreeBSD's source trees, though other people may find it useful for other purposes as time goes by. Little, if any, documentation currently exists at this time on the process of creating deltas, so talk to &a.phk; for more information should you wish to use CTM for other things. Why should I use <application>CTM</application>? CTM will give you a local copy of the FreeBSD source trees. There are a number of “flavors” of the tree available. Whether you wish to track the entire CVS tree or just one of the branches, CTM can provide you the information. If you are an active developer on FreeBSD, but have lousy or non-existent TCP/IP connectivity, or simply wish to have the changes automatically sent to you, CTM was made for you. You will need to obtain up to three deltas per day for the most active branches. However, you should consider having them sent by automatic email. The sizes of the updates are always kept as small as possible. This is typically less than 5K, with an occasional (one in ten) being 10-50K and every now and then a biggie of 100K+ or more coming around. You will also need to make yourself aware of the various caveats related to working directly from the development sources rather than a pre-packaged release. This is particularly true if you choose the “current” sources. It is recommended that you read Staying current with FreeBSD. What do I need to use <application>CTM</application>? You will need two things: The CTM program, and the initial deltas to feed it (to get up to “current” levels). The CTM program has been part of FreeBSD ever since version 2.0 was released, and lives in /usr/src/usr.sbin/CTM if you have a copy of the source available. If you are running a pre-2.0 version of FreeBSD, you can fetch the current CTM sources directly from: ftp://ftp.FreeBSD.org/pub/FreeBSD/FreeBSD-current/src/usr.sbin/ctm/ The “deltas” you feed CTM can be had two ways, FTP or email. If you have general FTP access to the Internet then the following FTP sites support access to CTM: ftp://ftp.FreeBSD.org/pub/FreeBSD/CTM/ or see section mirrors. FTP the relevant directory and fetch the README file, starting from there. If you wish to get your deltas via email: Send email to &a.majordomo; to subscribe to one of the CTM distribution lists. “ctm-cvs-cur” supports the entire cvs tree. “ctm-src-cur” supports the head of the development branch. “ctm-src-2_2” supports the 2.2 release branch, etc.. (If you do not know how to subscribe yourself using majordomo, send a message first containing the word help — it will send you back usage instructions.) When you begin receiving your CTM updates in the mail, you may use the ctm_rmail program to unpack and apply them. You can actually use the ctm_rmail program directly from a entry in /etc/aliases if you want to have the process run in a fully automated fashion. Check the ctm_rmail man page for more details. No matter what method you use to get the CTM deltas, you should subscribe to the ctm-announce@FreeBSD.org mailing list. In the future, this will be the only place where announcements concerning the operations of the CTM system will be posted. Send an email to &a.majordomo; with a single line of subscribe ctm-announce to get added to the list. Using <application>CTM</application> for the first time Before you can start using CTM deltas, you will need to get to a starting point for the deltas produced subsequently to it. First you should determine what you already have. Everyone can start from an “empty” directory. You must use an initial “Empty” delta to start off your CTM supported tree. At some point it is intended that one of these “started” deltas be distributed on the CD for your convenience, however, this does not currently happen. Since the trees are many tens of megabytes, you should prefer to start from something already at hand. If you have a -RELEASE CD, you can copy or extract an initial source from it. This will save a significant transfer of data. You can recognize these “starter” deltas by the X appended to the number (src-cur.3210XEmpty.gz for instance). The designation following the X corresponds to the origin of your initial “seed”. Empty is an empty directory. As a rule a base transition from Empty is produced every 100 deltas. By the way, they are large! 25 to 30 Megabytes of gzip'd data is common for the XEmpty deltas. Once you've picked a base delta to start from, you will also need all deltas with higher numbers following it. Using <application>CTM</application> in your daily life To apply the deltas, simply say: &prompt.root; cd /where/ever/you/want/the/stuff &prompt.root; ctm -v -v /where/you/store/your/deltas/src-xxx.* CTM understands deltas which have been put through gzip, so you do not need to gunzip them first, this saves disk space. Unless it feels very secure about the entire process, CTM will not touch your tree. To verify a delta you can also use the flag and CTM will not actually touch your tree; it will merely verify the integrity of the delta and see if it would apply cleanly to your current tree. There are other options to CTM as well, see the manual pages or look in the sources for more information. I would also be very happy if somebody could help with the “user interface” portions, as I have realized that I cannot make up my mind on what options should do what, how and when... That is really all there is to it. Every time you get a new delta, just run it through CTM to keep your sources up to date. Do not remove the deltas if they are hard to download again. You just might want to keep them around in case something bad happens. Even if you only have floppy disks, consider using fdwrite to make a copy. Keeping your local changes As a developer one would like to experiment with and change files in the source tree. CTM supports local modifications in a limited way: before checking for the presence of a file foo, it first looks for foo.ctm. If this file exists, CTM will operate on it instead of foo. This behavior gives us a simple way to maintain local changes: simply copy the files you plan to modify to the corresponding file names with a .ctm suffix. Then you can freely hack the code, while CTM keeps the .ctm file up-to-date. Other interesting <application>CTM</application> options Finding out exactly what would be touched by an update You can determine the list of changes that CTM will make on your source repository using the option to CTM. This is useful if you would like to keep logs of the changes, pre- or post- process the modified files in any manner, or just are feeling a tad paranoid :-). Making backups before updating Sometimes you may want to backup all the files that would be changed by a CTM update. Specifying the option causes CTM to backup all files that would be touched by a given CTM delta to backup-file. Restricting the files touched by an update Sometimes you would be interested in restricting the scope of a given CTM update, or may be interested in extracting just a few files from a sequence of deltas. You can control the list of files that CTM would operate on by specifying filtering regular expressions using the and options. For example, to extract an up-to-date copy of lib/libc/Makefile from your collection of saved CTM deltas, run the commands: &prompt.root; cd /where/ever/you/want/to/extract/it/ &prompt.root; ctm -e '^lib/libc/Makefile' ~ctm/src-xxx.* For every file specified in a CTM delta, the and options are applied in the order given on the command line. The file is processed by CTM only if it is marked as eligible after all the and options are applied to it. Future plans for <application>CTM</application> Tons of them: Use some kind of authentication into the CTM system, so as to allow detection of spoofed CTM updates. Clean up the options to CTM, they became confusing and counter intuitive. Miscellaneous stuff There is a sequence of deltas for the ports collection too, but interest has not been all that high yet. Tell me if you want an email list for that too and we will consider setting it up. CTM mirrors CTM/FreeBSD is available via anonymous FTP from the following mirror sites. If you choose to obtain CTM via anonymous FTP, please try to use a site near you. In case of problems, please contact &a.phk;. California, Bay Area, official source ftp://ftp.FreeBSD.org/pub/FreeBSD/development/CTM/ Germany, Trier ftp://ftp.uni-trier.de/pub/unix/systems/BSD/FreeBSD/CTM/ South Africa, backup server for old deltas ftp://ftp.za.FreeBSD.org/pub/FreeBSD/CTM/ Taiwan/R.O.C, Chiayi ftp://ctm.tw.FreeBSD.org/pub/FreeBSD/CTM/ ftp://ctm2.tw.FreeBSD.org/pub/FreeBSD/CTM/ ftp://ctm3.tw.FreeBSD.org/pub/freebsd/CTM/ If you did not find a mirror near to you or the mirror is incomplete, try FTP search at http://ftpsearch.ntnu.no/ftpsearch. FTP search is a great free archie server in Trondheim, Norway. Using CVSup Introduction CVSup is a software package for distributing and updating source trees from a master CVS repository on a remote server host. The FreeBSD sources are maintained in a CVS repository on a central development machine in California. With CVSup, FreeBSD users can easily keep their own source trees up to date. CVSup uses the so-called pull model of updating. Under the pull model, each client asks the server for updates, if and when they are wanted. The server waits passively for update requests from its clients. Thus all updates are instigated by the client. The server never sends unsolicited updates. Users must either run the CVSup client manually to get an update, or they must set up a cron job to run it automatically on a regular basis. The term CVSup, capitalized just so, refers to the entire software package. Its main components are the client cvsup which runs on each user's machine, and the server cvsupd which runs at each of the FreeBSD mirror sites. As you read the FreeBSD documentation and mailing lists, you may see references to sup. Sup was the predecessor of CVSup, and it served a similar purpose.CVSup is in used in much the same way as sup and, in fact, uses configuration files which are backward-compatible with sup's. Sup is no longer used in the FreeBSD project, because CVSup is both faster and more flexible. Installation The easiest way to install CVSup is to use the net/cvsup-bin port from the FreeBSD ports collection. If you prefer to build CVSup from source, you can use the net/cvsup port instead. But be forewarned: the net/cvsup port depends on the Modula-3 system, which takes a substantial amount of time, memory, and disk space to build. If you do not know anything about cvsup at all and want a single package which will install it, set up the configuration file and start the transfer via a pointy-clicky type of interface, then get the cvsupit package. Just hand it to &man.pkg.add.1; and it will lead you through the configuration process in a menu-oriented fashion. CVSup Configuration CVSup's operation is controlled by a configuration file called the supfile. There are some sample supfiles in the directory /usr/share/examples/cvsup/. The information in a supfile answers the following questions for cvsup: Which files do you want to receive? Which versions of them do you want? Where do you want to get them from? Where do you want to put them on your own machine? Where do you want to put your status files? In the following sections, we will construct a typical supfile by answering each of these questions in turn. First, we describe the overall structure of a supfile. A supfile is a text file. Comments begin with # and extend to the end of the line. Lines that are blank and lines that contain only comments are ignored. Each remaining line describes a set of files that the user wishes to receive. The line begins with the name of a collection, a logical grouping of files defined by the server. The name of the collection tells the server which files you want. After the collection name come zero or more fields, separated by white space. These fields answer the questions listed above. There are two types of fields: flag fields and value fields. A flag field consists of a keyword standing alone, e.g., delete or compress. A value field also begins with a keyword, but the keyword is followed without intervening white space by = and a second word. For example, release=cvs is a value field. A supfile typically specifies more than one collection to receive. One way to structure a supfile is to specify all of the relevant fields explicitly for each collection. However, that tends to make the supfile lines quite long, and it is inconvenient because most fields are the same for all of the collections in a supfile. CVSup provides a defaulting mechanism to avoid these problems. Lines beginning with the special pseudo-collection name *default can be used to set flags and values which will be used as defaults for the subsequent collections in the supfile. A default value can be overridden for an individual collection, by specifying a different value with the collection itself. Defaults can also be changed or augmented in mid-supfile by additional *default lines. With this background, we will now proceed to construct a supfile for receiving and updating the main source tree of FreeBSD-CURRENT. Which files do you want to receive? The files available via CVSup are organized into named groups called collections. The collections that are available are described here. In this example, we wish to receive the entire main source tree for the FreeBSD system. There is a single large collection src-all which will give us all of that. As a first step toward constructing our supfile, we simply list the collections, one per line (in this case, only one line): src-all Which version(s) of them do you want? With CVSup, you can receive virtually any version of the sources that ever existed. That is possible because the cvsupd server works directly from the CVS repository, which contains all of the versions. You specify which one of them you want using the tag= and value fields. Be very careful to specify any tag= fields correctly. Some tags are valid only for certain collections of files. If you specify an incorrect or misspelled tag, CVSup will delete files which you probably do not want deleted. In particular, use only tag=. for the ports-* collections. The tag= field names a symbolic tag in the repository. There are two kinds of tags, revision tags and branch tags. A revision tag refers to a specific revision. Its meaning stays the same from day to day. A branch tag, on the other hand, refers to the latest revision on a given line of development, at any given time. Because a branch tag does not refer to a specific revision, it may mean something different tomorrow than it means today. Here are the branch tags that users might be interested in. Keep in mind that only the tag=. is relevant for the ports collection. tag=. The main line of development, also known as FreeBSD-CURRENT. The . is not punctuation; it is the name of the tag. Valid for all collections. tag=RELENG_4 The line of development for FreeBSD-4.X, also known as FreeBSD-STABLE. tag=RELENG_3 The line of development for FreeBSD-3.X tag=RELENG_2_2 The line of development for FreeBSD-2.2.X, also known as 2.2-STABLE. Here are the revision tags that users might be interested in. Again, these are not valid for the ports collection. tag=RELENG_4_0_0_RELEASE FreeBSD-4.0 tag=RELENG_3_4_0_RELEASE FreeBSD-3.4. tag=RELENG_3_3_0_RELEASE FreeBSD-3.3. tag=RELENG_3_2_0_RELEASE FreeBSD-3.2. tag=RELENG_3_1_0_RELEASE FreeBSD-3.1. tag=RELENG_3_0_0_RELEASE FreeBSD-3.0. tag=RELENG_2_2_8_RELEASE FreeBSD-2.2.8. tag=RELENG_2_2_7_RELEASE FreeBSD-2.2.7. tag=RELENG_2_2_6_RELEASE FreeBSD-2.2.6. tag=RELENG_2_2_5_RELEASE FreeBSD-2.2.5. tag=RELENG_2_2_2_RELEASE FreeBSD-2.2.2. tag=RELENG_2_2_1_RELEASE FreeBSD-2.2.1. tag=RELENG_2_2_0_RELEASE FreeBSD-2.2.0. Be very careful to type the tag name exactly as shown. CVSup cannot distinguish between valid and invalid tags. If you misspell the tag, CVSup will behave as though you had specified a valid tag which happens to refer to no files at all. It will delete your existing sources in that case. When you specify a branch tag, you normally receive the latest versions of the files on that line of development. If you wish to receive some past version, you can do so by specifying a date with the value field. The &man.cvsup.1; manual page explains how to do that. For our example, we wish to receive FreeBSD-CURRENT. We add this line at the beginning of our supfile: *default tag=. There is an important special case that comes into play if you specify neither a tag= field nor a date= field. In that case, you receive the actual RCS files directly from the server's CVS repository, rather than receiving a particular version. Developers generally prefer this mode of operation. By maintaining a copy of the repository itself on their systems, they gain the ability to browse the revision histories and examine past versions of files. This gain is achieved at a large cost in terms of disk space, however. Where do you want to get them from? We use the host= field to tell cvsup where to obtain its updates. Any of the CVSup mirror sites will do, though you should try to select one that is close to you in cyberspace. In this example we will use a fictional FreeBSD distribution site, cvsup666.FreeBSD.org: *default host=cvsup666.FreeBSD.org You will need to change the host to one that actually exists before running CVSup. On any particular run of cvsup, you can override the host setting on the command line, with . Where do you want to put them on your own machine? The prefix= field tells cvsup where to put the files it receives. In this example, we will put the source files directly into our main source tree, /usr/src. The src directory is already implicit in the collections we have chosen to receive, so this is the correct specification: *default prefix=/usr Where should cvsup maintain its status files? The cvsup client maintains certain status files in what is called the base directory. These files help CVSup to work more efficiently, by keeping track of which updates you have already received. We will use the standard base directory, /usr/local/etc/cvsup: *default base=/usr/local/etc/cvsup This setting is used by default if it is not specified in the supfile, so we actually do not need the above line. If your base directory does not already exist, now would be a good time to create it. The cvsup client will refuse to run if the base directory does not exist. Miscellaneous supfile settings: There is one more line of boiler plate that normally needs to be present in the supfile: *default release=cvs delete use-rel-suffix compress release=cvs indicates that the server should get its information out of the main FreeBSD CVS repository. This is virtually always the case, but there are other possibilities which are beyond the scope of this discussion. delete gives CVSup permission to delete files. You should always specify this, so that CVSup can keep your source tree fully up-to-date. CVSup is careful to delete only those files for which it is responsible. Any extra files you happen to have will be left strictly alone. use-rel-suffix is ... arcane. If you really want to know about it, see the &man.cvsup.1; manual page. Otherwise, just specify it and do not worry about it. compress enables the use of gzip-style compression on the communication channel. If your network link is T1 speed or faster, you probably should not use compression. Otherwise, it helps substantially. Putting it all together: Here is the entire supfile for our example: *default tag=. *default host=cvsup666.FreeBSD.org *default prefix=/usr *default base=/usr/local/etc/cvsup *default release=cvs delete use-rel-suffix compress src-all The refuse file As mentioned above, CVSup uses a pull method. Basically, this means that you connect to the CVSup server, and it says, Here's what you can download from me..., and your client responds OK, I'll take this, this, this, and this. In the default configuration, the CVSup client will take every file associated with the collection and tag you chose in the configuration file. However, this is not always what you want, especially if you are synching the doc, ports, or www trees — most people can't read four or five languages, and therefore they don't need to download the language-specific files. If you are CVSuping the ports collection, you can get around this by specifying each collection individually (e.g., ports-astrology, ports-biology, etc instead of simply saying ports-all). However, since the doc and www trees do not have language-specific collections, you must use one of CVSup's many nifty features; the refuse file. The refuse file essentially tells CVSup that it should not take every single file from a collection; in other words, it tells the client to refuse certain files from the server. The refuse file can be found (or, if you do not yet have one, should be placed) in base/sup/refuse. base is defined in your supfile; by default, base is /usr/sup, which means that by default the refuse file is in /usr/sup/refuse. The refuse file has a very simple format; it simply contains the names of files or directories that you do not wish to to download. For example, since I cannot speak any languages except for English and some German, and I do not feel the need to use German applications, I have the following in my refuse file: ports/chinese ports/german ports/japanese ports/korean ports/russian ports/vietnamese doc/es_ES.ISO_8859-1 doc/ja_JP.eucJP and so forth for the other languages. Note that the name of the repository is the first directory in the refuse file. With this very useful feature, those users who are on slow links or pay by the minute for their Internet connection will be able to save valuable time as they will no longer need to download files that they will never use. For more information on refuse files and other neat features of CVSup, please view its man page. Running <application>CVSup</application> You are now ready to try an update. The command line for doing this is quite simple: &prompt.root; cvsup supfile where supfile is of course the name of the supfile you have just created. Assuming you are running under X11, cvsup will display a GUI window with some buttons to do the usual things. Press the go button, and watch it run. Since you are updating your actual /usr/src tree in this example, you will need to run the program as root so that cvsup has the permissions it needs to update your files. Having just created your configuration file, and having never used this program before, that might understandably make you nervous. There is an easy way to do a trial run without touching your precious files. Just create an empty directory somewhere convenient, and name it as an extra argument on the command line: &prompt.root; mkdir /var/tmp/dest &prompt.root; cvsup supfile /var/tmp/dest The directory you specify will be used as the destination directory for all file updates. CVSup will examine your usual files in /usr/src, but it will not modify or delete any of them. Any file updates will instead land in /var/tmp/dest/usr/src. CVSup will also leave its base directory status files untouched when run this way. The new versions of those files will be written into the specified directory. As long as you have read access to /usr/src, you do not even need to be root to perform this kind of trial run. If you are not running X11 or if you just do not like GUIs, you should add a couple of options to the command line when you run cvsup: &prompt.root; cvsup -g -L 2 supfile The tells cvsup not to use its GUI. This is automatic if you are not running X11, but otherwise you have to specify it. The tells cvsup to print out the details of all the file updates it is doing. There are three levels of verbosity, from to . The default is 0, which means total silence except for error messages. There are plenty of other options available. For a brief list of them, type cvsup -H. For more detailed descriptions, see the manual page. Once you are satisfied with the way updates are working, you can arrange for regular runs of cvsup using &man.cron.8;. Obviously, you should not let cvsup use its GUI when running it from cron. <application>CVSup</application> File Collections The file collections available via CVSup are organized hierarchically. There are a few large collections, and they are divided into smaller sub-collections. Receiving a large collection is equivalent to receiving each of its sub-collections. The hierarchical relationships among collections are reflected by the use of indentation in the list below. The most commonly used collections are src-all, and ports-all. The other collections are used only by small groups of people for specialized purposes, and some mirror sites may not carry all of them. cvs-all release=cvs The main FreeBSD CVS repository, including the cryptography code. distrib release=cvs Files related to the distribution and mirroring of FreeBSD. doc-all release=cvs Sources for the FreeBSD handbook and other documentation. ports-all release=cvs The FreeBSD ports collection. ports-archivers release=cvs Archiving tools. ports-astro release=cvs Astronomical ports. ports-audio release=cvs Sound support. ports-base release=cvs Miscellaneous files at the top of /usr/ports. ports-benchmarks release=cvs Benchmarks. ports-biology release=cvs Biology. ports-cad release=cvs Computer aided design tools. ports-chinese release=cvs Chinese language support. ports-comms release=cvs Communication software. ports-converters release=cvs character code converters. ports-databases release=cvs Databases. ports-deskutils release=cvs Things that used to be on the desktop before computers were invented. ports-devel release=cvs Development utilities. ports-editors release=cvs Editors. ports-emulators release=cvs Emulators for other operating systems. ports-ftp release=cvs FTP client and server utilities. ports-games release=cvs Games. ports-german release=cvs German language support. ports-graphics release=cvs Graphics utilities. ports-irc release=cvs Internet Relay Chat utilities. ports-japanese release=cvs Japanese language support. ports-java release=cvs Java utilities. ports-korean release=cvs Korean language support. ports-lang release=cvs Programming languages. ports-mail release=cvs Mail software. ports-math release=cvs Numerical computation software. ports-mbone release=cvs MBone applications. ports-misc release=cvs Miscellaneous utilities. ports-net release=cvs Networking software. ports-news release=cvs USENET news software. ports-palm release=cvs Software support for 3Com Palm(tm) series. ports-print release=cvs Printing software. ports-russian release=cvs Russian language support. ports-security release=cvs Security utilities. ports-shells release=cvs Command line shells. ports-sysutils release=cvs System utilities. ports-textproc release=cvs text processing utilities (does not include desktop publishing). ports-vietnamese release=cvs Vietnamese language support. ports-www release=cvs Software related to the World Wide Web. ports-x11 release=cvs Ports to support the X window system. ports-x11-clocks release=cvs X11 clocks. ports-x11-fm release=cvs X11 file managers. ports-x11-fonts release=cvs X11 fonts and font utilities. ports-x11-toolkits release=cvs X11 toolkits. ports-x11-servers X11 servers. ports-x11-wm X11 window managers. src-all release=cvs The main FreeBSD sources, including the cryptography code. src-base release=cvs Miscellaneous files at the top of /usr/src. src-bin release=cvs User utilities that may be needed in single-user mode (/usr/src/bin). src-contrib release=cvs Utilities and libraries from outside the FreeBSD project, used relatively unmodified (/usr/src/contrib). src-crypto release=cvs Cryptography utilities and libraries from outside the FreeBSD project, used relatively unmodified (/usr/src/crypto). src-eBones release=cvs Kerberos and DES (/usr/src/eBones). Not used in current releases of FreeBSD. src-etc release=cvs System configuration files (/usr/src/etc). src-games release=cvs Games (/usr/src/games). src-gnu release=cvs Utilities covered by the GNU Public License (/usr/src/gnu). src-include release=cvs Header files (/usr/src/include). src-kerberos5 release=cvs Kerberos5 security package (/usr/src/kerberos5). src-kerberosIV release=cvs KerberosIV security package (/usr/src/kerberosIV). src-lib release=cvs Libraries (/usr/src/lib). src-libexec release=cvs System programs normally executed by other programs (/usr/src/libexec). src-release release=cvs Files required to produce a FreeBSD release (/usr/src/release). src-secure release=cvs DES (/usr/src/secure). src-sbin release=cvs System utilities for single-user mode (/usr/src/sbin). src-share release=cvs Files that can be shared across multiple systems (/usr/src/share). src-sys release=cvs The kernel (/usr/src/sys). src-sys-crypto release=cvs Kernel cryptography code (/usr/src/sys/crypto). src-tools release=cvs Various tools for the maintenance of FreeBSD (/usr/src/tools). src-usrbin release=cvs User utilities (/usr/src/usr.bin). src-usrsbin release=cvs System utilities (/usr/src/usr.sbin). www release=cvs The sources for the World Wide Web data. distrib release=self The CVSup server's own configuration files. Used by CVSup mirror sites. gnats release=current The GNATS bug-tracking database. mail-archive release=current FreeBSD mailing list archive. www release=current The installed World Wide Web data. Used by WWW mirror sites. For more information For the CVSup FAQ and other information about CVSup, see The CVSup Home Page. Most FreeBSD-related discussion of CVSup takes place on the &a.hackers;. New versions of the software are announced there, as well as on the &a.announce;. Questions and bug reports should be addressed to the author of the program at cvsup-bugs@polstra.com. CVSup Sites CVSup servers for FreeBSD are running at the following sites: Argentina cvsup.ar.FreeBSD.org (maintainer msagre@cactus.fi.uba.ar) Australia cvsup.au.FreeBSD.org (maintainer dawes@xfree86.org) cvsup3.au.FreeBSD.org (maintainer FreeBSD@admin.gil.com.au) Austria cvsup.at.FreeBSD.org (maintainer postmaster@wu-wien.ac.at) Brazil cvsup.br.FreeBSD.org (maintainer cvsup@cvsup.br.FreeBSD.org) cvsup2.br.FreeBSD.org (maintainer tps@ti.sk) cvsup3.br.FreeBSD.org (maintainer camposr@matrix.com.br) Canada cvsup.ca.FreeBSD.org (maintainer dan@jaded.net) cvsup2.ca.FreeBSD.org (maintainer mitayai@dreaming.org) China cvsup.cn.FreeBSD.org (maintainer phj@cn.FreeBSD.org) Czech Republic cvsup.cz.FreeBSD.org (maintainer cejkar@dcse.fee.vutbr.cz) Denmark cvsup.dk.FreeBSD.org (maintainer jesper@skriver.dk) Estonia cvsup.ee.FreeBSD.org (maintainer taavi@uninet.ee) Finland cvsup.fi.FreeBSD.org (maintainer count@key.sms.fi) cvsup2.fi.FreeBSD.org (maintainer count@key.sms.fi) France cvsup.fr.FreeBSD.org (maintainer hostmaster@fr.FreeBSD.org) cvsup2.fr.FreeBSD.org (maintainer ftpmaint@uvsq.fr) Germany cvsup.de.FreeBSD.org (maintainer wosch@FreeBSD.org) cvsup2.de.FreeBSD.org (maintainer petzi@FreeBSD.org) cvsup3.de.FreeBSD.org (maintainer ag@leo.org) cvsup4.de.FreeBSD.org (maintainer cvsup@cosmo-project.de) Iceland cvsup.is.FreeBSD.org (maintainer adam@veda.is) Japan cvsup.jp.FreeBSD.org (maintainer cvsupadm@jp.FreeBSD.org) cvsup2.jp.FreeBSD.org (maintainer max@FreeBSD.org) cvsup3.jp.FreeBSD.org (maintainer shige@cin.nihon-u.ac.jp) cvsup4.jp.FreeBSD.org (maintainer cvsup-admin@ftp.media.kyoto-u.ac.jp) cvsup5.jp.FreeBSD.org (maintainer cvsup@imasy.or.jp) cvsup6.jp.FreeBSD.org (maintainer cvsupadm@jp.FreeBSD.org) Korea cvsup.kr.FreeBSD.org (maintainer cjh@kr.FreeBSD.org) cvsup2.kr.FreeBSD.org (maintainer holywar@mail.holywar.net) Netherlands cvsup.nl.FreeBSD.org (maintainer xaa@xaa.iae.nl) cvsup2.nl.FreeBSD.org (maintainer cvsup@nl.uu.net) Norway cvsup.no.FreeBSD.org (maintainer Per.Hove@math.ntnu.no) Poland cvsup.pl.FreeBSD.org (maintainer Mariusz@kam.pl) Portugal cvsup.pt.FreeBSD.org (maintainer jpedras@webvolution.net) Russia cvsup.ru.FreeBSD.org (maintainer ache@nagual.pp.ru) cvsup2.ru.FreeBSD.org (maintainer dv@dv.ru) cvsup3.ru.FreeBSD.org (maintainer fjoe@iclub.nsu.ru) Slovak Republic cvsup.sk.FreeBSD.org (maintainer tps@tps.sk) cvsup2.sk.FreeBSD.org (maintainer tps@tps.sk) Slovenia cvsup.si.FreeBSD.org (maintainer blaz@si.FreeBSD.org) South Africa cvsup.za.FreeBSD.org (maintainer markm@FreeBSD.org) cvsup2.za.FreeBSD.org (maintainer markm@FreeBSD.org) Spain cvsup.es.FreeBSD.org (maintainer jesusr@FreeBSD.org) Sweden cvsup.se.FreeBSD.org (maintainer pantzer@ludd.luth.se) Taiwan cvsup.tw.FreeBSD.org (maintainer jdli@freebsd.csie.nctu.edu.tw) cvsup2.tw.FreeBSD.org (maintainer ycheng@sinica.edu.tw) cvsup3.tw.FreeBSD.org (maintainer foxfair@FreeBSD.org) Ukraine cvsup2.ua.FreeBSD.org (maintainer freebsd-mnt@lucky.net) cvsup3.ua.FreeBSD.org (maintainer ftpmaster@ukr.net), Kiev cvsup4.ua.FreeBSD.org (maintainer phantom@cris.net) United Kingdom cvsup.uk.FreeBSD.org (maintainer joe@pavilion.net) cvsup2.uk.FreeBSD.org (maintainer brian@FreeBSD.org) cvsup3.uk.FreeBSD.org (maintainer ftp-admin@plig.net) USA cvsup1.FreeBSD.org (maintainer skynyrd@opus.cts.cwu.edu), Washington state cvsup2.FreeBSD.org (maintainer jdp@FreeBSD.org), California cvsup3.FreeBSD.org (maintainer wollman@FreeBSD.org), Massachusetts cvsup4.FreeBSD.org (maintainer rgrimes@FreeBSD.org), Oregon cvsup5.FreeBSD.org (maintainer mjr@blackened.com), Arizona cvsup7.FreeBSD.org (maintainer jdp@FreeBSD.org), Washington state cvsup8.FreeBSD.org (maintainer hostmaster@bigmirror.com), Washington state The following CVSup site is especially designed for CTM users. Unlike the other CVSup mirrors, it is kept up-to-date by CTM. That means if you CVSup cvs-all with release=cvs from this site, you get a version of the repository (including the inevitable .ctm_status file) which is suitable for being updated using the CTM cvs-cur deltas. This allows users who track the entire cvs-all tree to go from CVSup to CTM without having to rebuild their repository from scratch using a fresh CTM base delta. This special feature only works for the cvs-all distribution with cvs as the release tag. CVSupping any other distribution and/or release will get you the specified distribution, but it will not be suitable for CTM updating. Because the current version of CTM does not preserve the time stamps of files, the time stamps at this mirror site are not the same as those at other mirror sites. Switching between this site and other sites is not recommended. It will work correctly, but will be somewhat inefficient. Germany ctm.FreeBSD.org (maintainer blank@fox.uni-trier.de) AFS Sites AFS servers for FreeBSD are running at the following sites; Sweden The path to the files are: /afs/stacken.kth.se/ftp/pub/FreeBSD/ stacken.kth.se # Stacken Computer Club, KTH, Sweden 130.237.234.43 #hot.stacken.kth.se 130.237.237.230 #fishburger.stacken.kth.se 130.237.234.3 #milko.stacken.kth.se Maintainer ftp@stacken.kth.se diff --git a/en_US.ISO_8859-1/books/handbook/mirrors/chapter.sgml b/en_US.ISO_8859-1/books/handbook/mirrors/chapter.sgml index cde280cb70..4d36f826c4 100644 --- a/en_US.ISO_8859-1/books/handbook/mirrors/chapter.sgml +++ b/en_US.ISO_8859-1/books/handbook/mirrors/chapter.sgml @@ -1,3588 +1,3588 @@ Obtaining FreeBSD CD-ROM Publishers FreeBSD is available on CD-ROM from Walnut Creek CDROM:
Walnut Creek CDROM 4041 Pike Lane, Suite F Concord CA, 94520 USA Phone: +1 925 674-0783 Fax: +1 925 674-0821 Email: info@cdrom.com WWW: http://www.cdrom.com/
FTP Sites The official sources for FreeBSD are available via anonymous FTP from:
ftp://ftp.FreeBSD.org/pub/FreeBSD/.
The FreeBSD mirror sites database is more accurate than the mirror listing in the handbook, as it gets its information form the DNS rather than relying on static lists of hosts. Additionally, FreeBSD is available via anonymous FTP from the following mirror sites. If you choose to obtain FreeBSD via anonymous FTP, please try to use a site near you. Argentina, Australia, Brazil, Canada, China, Czech Republic, Denmark, Estonia, Finland, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea, Netherlands, New Zealand, Poland, Portugal, Russia, Saudi Arabia, South Africa, Spain, Slovak Republic, Slovenia, Sweden, Taiwan, Thailand, UK, Ukraine, USA. Argentina In case of problems, please contact the hostmaster hostmaster@ar.FreeBSD.org for this domain. ftp://ftp.ar.FreeBSD.org/pub/FreeBSD/ Australia In case of problems, please contact the hostmaster hostmaster@au.FreeBSD.org for this domain. ftp://ftp.au.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.au.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.au.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.au.FreeBSD.org/pub/FreeBSD/ Brazil In case of problems, please contact the hostmaster hostmaster@br.FreeBSD.org for this domain. ftp://ftp.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.br.FreeBSD.org/pub/FreeBSD/ ftp://ftp7.br.FreeBSD.org/pub/FreeBSD/ Canada In case of problems, please contact the hostmaster hostmaster@ca.FreeBSD.org for this domain. ftp://ftp.ca.FreeBSD.org/pub/FreeBSD/ China In case of problems, please contact the hostmaster phj@cn.FreeBSD.org for this domain. ftp://ftp.cn.FreeBSD.org/pub/FreeBSD/ Czech Republic In case of problems, please contact the hostmaster hostmaster@cz.FreeBSD.org for this domain. ftp://ftp.cz.FreeBSD.org/pub/FreeBSD/ Contact: calda@dzungle.ms.mff.cuni.cz Denmark In case of problems, please contact the hostmaster hostmaster@dk.FreeBSD.org for this domain. ftp://ftp.dk.FreeBSD.org/pub/FreeBSD/ Estonia In case of problems, please contact the hostmaster hostmaster@ee.FreeBSD.org for this domain. ftp://ftp.ee.FreeBSD.org/pub/FreeBSD/ Finland In case of problems, please contact the hostmaster hostmaster@fi.FreeBSD.org for this domain. ftp://ftp.fi.FreeBSD.org/pub/FreeBSD/ France In case of problems, please contact the hostmaster hostmaster@fr.FreeBSD.org for this domain. ftp://ftp.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp1.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp1.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp2.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp2.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp3.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp3.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp4.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp4.fr.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.fr.FreeBSD.org/pub/FreeBSD/ + url="ftp://ftp5.fr.FreeBSD.org/pub/FreeBSD/">ftp://ftp5.fr.FreeBSD.org/pub/FreeBSD/ Germany In case of problems, please contact the mirror admins de-bsd-hubs@de.FreeBSD.org for this domain. ftp://ftp.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.de.FreeBSD.org/pub/FreeBSD/ ftp://ftp7.de.FreeBSD.org/pub/FreeBSD/ Hong Kong ftp://ftp.hk.super.net/pub/FreeBSD/ Contact: ftp-admin@HK.Super.NET. Ireland In case of problems, please contact the hostmaster hostmaster@ie.FreeBSD.org for this domain. ftp://ftp.ie.FreeBSD.org/pub/FreeBSD/ Israel In case of problems, please contact the hostmaster hostmaster@il.FreeBSD.org for this domain. ftp://ftp.il.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.il.FreeBSD.org/pub/FreeBSD/ Japan In case of problems, please contact the hostmaster hostmaster@jp.FreeBSD.org for this domain. ftp://ftp.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.jp.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.jp.FreeBSD.org/pub/FreeBSD/ Korea In case of problems, please contact the hostmaster hostmaster@kr.FreeBSD.org for this domain. ftp://ftp.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.kr.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.kr.FreeBSD.org/pub/FreeBSD/ Netherlands In case of problems, please contact the hostmaster hostmaster@nl.FreeBSD.org for this domain. ftp://ftp.nl.FreeBSD.org/pub/FreeBSD/ New Zealand In case of problems, please contact the hostmaster hostmaster@nz.FreeBSD.org for this domain. ftp://ftp.nz.FreeBSD.org/pub/FreeBSD/ Poland In case of problems, please contact the hostmaster hostmaster@pl.FreeBSD.org for this domain. ftp://ftp.pl.FreeBSD.org/pub/FreeBSD/ Portugal In case of problems, please contact the hostmaster hostmaster@pt.FreeBSD.org for this domain. ftp://ftp.pt.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.pt.FreeBSD.org/pub/FreeBSD/ Russia In case of problems, please contact the hostmaster hostmaster@ru.FreeBSD.org for this domain. ftp://ftp.ru.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.ru.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.ru.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.ru.FreeBSD.org/pub/FreeBSD/ Saudi Arabia In case of problems, please contact ftpadmin@isu.net.sa ftp://ftp.isu.net.sa/pub/mirrors/ftp.freebsd.org/ South Africa In case of problems, please contact the hostmaster hostmaster@za.FreeBSD.org for this domain. ftp://ftp.za.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.za.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.za.FreeBSD.org/FreeBSD/ Slovak Republic In case of problems, please contact the hostmaster hostmaster@sk.FreeBSD.org for this domain. ftp://ftp.sk.FreeBSD.org/pub/FreeBSD/ Slovenia In case of problems, please contact the hostmaster hostmaster@si.FreeBSD.org for this domain. ftp://ftp.si.FreeBSD.org/pub/FreeBSD/ Spain In case of problems, please contact the hostmaster hostmaster@es.FreeBSD.org for this domain. ftp://ftp.es.FreeBSD.org/pub/FreeBSD/ Sweden In case of problems, please contact the hostmaster hostmaster@se.FreeBSD.org for this domain. ftp://ftp.se.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.se.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.se.FreeBSD.org/pub/FreeBSD/ Taiwan In case of problems, please contact the hostmaster hostmaster@tw.FreeBSD.org for this domain. ftp://ftp.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.tw.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.tw.FreeBSD.org/pub/FreeBSD/ Thailand ftp://ftp.nectec.or.th/pub/FreeBSD/ Contact: ftpadmin@ftp.nectec.or.th. Ukraine ftp://ftp.ua.FreeBSD.org/pub/FreeBSD/ Contact: freebsd-mnt@lucky.net. UK In case of problems, please contact the hostmaster hostmaster@uk.FreeBSD.org for this domain. ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.uk.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.uk.FreeBSD.org/pub/FreeBSD/ USA In case of problems, please contact the hostmaster hostmaster@FreeBSD.org for this domain. ftp://ftp.FreeBSD.org/pub/FreeBSD/ ftp://ftp2.FreeBSD.org/pub/FreeBSD/ ftp://ftp3.FreeBSD.org/pub/FreeBSD/ ftp://ftp4.FreeBSD.org/pub/FreeBSD/ ftp://ftp5.FreeBSD.org/pub/FreeBSD/ ftp://ftp6.FreeBSD.org/pub/FreeBSD/ Anonymous CVS <anchor id="anoncvs-intro">Introduction Anonymous CVS (or, as it is otherwise known, anoncvs) is a feature provided by the CVS utilities bundled with FreeBSD for synchronizing with a remote CVS repository. Among other things, it allows users of FreeBSD to perform, with no special privileges, read-only CVS operations against one of the FreeBSD project's official anoncvs servers. To use it, one simply sets the CVSROOT environment variable to point at the appropriate anoncvs server, provides the well-known password anoncvs with the cvs login command, and then uses the &man.cvs.1; command to access it like any local repository. While it can also be said that the CVSup and anoncvs services both perform essentially the same function, there are various trade-offs which can influence the user's choice of synchronization methods. In a nutshell, CVSup is much more efficient in its usage of network resources and is by far the most technically sophisticated of the two, but at a price. To use CVSup, a special client must first be installed and configured before any bits can be grabbed, and then only in the fairly large chunks which CVSup calls collections. Anoncvs, by contrast, can be used to examine anything from an individual file to a specific program (like ls or grep) by referencing the CVS module name. Of course, anoncvs is also only good for read-only operations on the CVS repository, so if it's your intention to support local development in one repository shared with the FreeBSD project bits then CVSup is really your only option. <anchor id="anoncvs-usage">Using Anonymous CVS Configuring &man.cvs.1; to use an Anonymous CVS repository is a simple matter of setting the CVSROOT environment variable to point to one of the FreeBSD project's anoncvs servers. At the time of this writing, the following servers are available: USA: :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs (Use cvs login and enter the password anoncvs when prompted.) Since CVS allows one to check out virtually any version of the FreeBSD sources that ever existed (or, in some cases, will exist :-), you need to be familiar with the revision () flag to &man.cvs.1; and what some of the permissible values for it in the FreeBSD Project repository are. There are two kinds of tags, revision tags and branch tags. A revision tag refers to a specific revision. Its meaning stays the same from day to day. A branch tag, on the other hand, refers to the latest revision on a given line of development, at any given time. Because a branch tag does not refer to a specific revision, it may mean something different tomorrow than it means today. Here are the branch tags that users might be interested in (keep in mind that the only tags valid for the ports collection is HEAD). HEAD Symbolic name for the main line, or FreeBSD-CURRENT. Also the default when no revision is specified. RELENG_4 The line of development for FreeBSD-4.X, also known as FreeBSD-STABLE. RELENG_3 The line of development for FreeBSD-3.X, also known as 3.X-STABLE. RELENG_2_2 The line of development for FreeBSD-2.2.X, also known as 2.2-STABLE. This branch is mostly obsolete. Here are the revision tags that users might be interested in. Again, none of these are valid for the ports collection since the ports collection does not have multiple revisions. RELENG_4_0_0_RELEASE FreeBSD 4.0. RELENG_3_4_0_RELEASE FreeBSD-3.4. RELENG_3_3_0_RELEASE FreeBSD-3.3. RELENG_3_2_0_RELEASE FreeBSD-3.2. RELENG_3_1_0_RELEASE FreeBSD-3.1. RELENG_3_0_0_RELEASE FreeBSD-3.0. RELENG_2_2_8_RELEASE FreeBSD-2.2.8. RELENG_2_2_7_RELEASE FreeBSD-2.2.7. RELENG_2_2_6_RELEASE FreeBSD-2.2.6. RELENG_2_2_5_RELEASE FreeBSD-2.2.5. RELENG_2_2_2_RELEASE FreeBSD-2.2.2. RELENG_2_2_1_RELEASE FreeBSD-2.2.1. RELENG_2_2_0_RELEASE FreeBSD-2.2.0. When you specify a branch tag, you normally receive the latest versions of the files on that line of development. If you wish to receive some past version, you can do so by specifying a date with the flag. See the &man.cvs.1; man page for more details. Examples While it really is recommended that you read the manual page for &man.cvs.1; thoroughly before doing anything, here are some quick examples which essentially show how to use Anonymous CVS: Checking out something from -CURRENT (&man.ls.1;) and deleting it again: &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs co ls &prompt.user; cvs release -d ls &prompt.user; cvs logout Checking out the version of &man.ls.1; in the 3.X-STABLE branch: &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs co -rRELENG_3 ls &prompt.user; cvs release -d ls &prompt.user; cvs logout Creating a list of changes (as unified diffs) to &man.ls.1; &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs rdiff -u -rRELENG_3_0_0_RELEASE -rRELENG_3_4_0_RELEASE ls &prompt.user; cvs logout Finding out what other module names can be used: &prompt.user; setenv CVSROOT :pserver:anoncvs@anoncvs.FreeBSD.org:/home/ncvs &prompt.user; cvs login At the prompt, enter the password anoncvs. &prompt.user; cvs co modules &prompt.user; more modules/modules &prompt.user; cvs release -d modules &prompt.user; cvs logout Other Resources The following additional resources may be helpful in learning CVS: CVS Tutorial from Cal Poly. Cyclic Software, commercial maintainers of CVS. CVSWeb is the FreeBSD Project web interface for CVS. Using CTM CTM is a method for keeping a remote directory tree in sync with a central one. It has been developed for usage with FreeBSD's source trees, though other people may find it useful for other purposes as time goes by. Little, if any, documentation currently exists at this time on the process of creating deltas, so talk to &a.phk; for more information should you wish to use CTM for other things. Why should I use <application>CTM</application>? CTM will give you a local copy of the FreeBSD source trees. There are a number of “flavors” of the tree available. Whether you wish to track the entire CVS tree or just one of the branches, CTM can provide you the information. If you are an active developer on FreeBSD, but have lousy or non-existent TCP/IP connectivity, or simply wish to have the changes automatically sent to you, CTM was made for you. You will need to obtain up to three deltas per day for the most active branches. However, you should consider having them sent by automatic email. The sizes of the updates are always kept as small as possible. This is typically less than 5K, with an occasional (one in ten) being 10-50K and every now and then a biggie of 100K+ or more coming around. You will also need to make yourself aware of the various caveats related to working directly from the development sources rather than a pre-packaged release. This is particularly true if you choose the “current” sources. It is recommended that you read Staying current with FreeBSD. What do I need to use <application>CTM</application>? You will need two things: The CTM program, and the initial deltas to feed it (to get up to “current” levels). The CTM program has been part of FreeBSD ever since version 2.0 was released, and lives in /usr/src/usr.sbin/CTM if you have a copy of the source available. If you are running a pre-2.0 version of FreeBSD, you can fetch the current CTM sources directly from: ftp://ftp.FreeBSD.org/pub/FreeBSD/FreeBSD-current/src/usr.sbin/ctm/ The “deltas” you feed CTM can be had two ways, FTP or email. If you have general FTP access to the Internet then the following FTP sites support access to CTM: ftp://ftp.FreeBSD.org/pub/FreeBSD/CTM/ or see section mirrors. FTP the relevant directory and fetch the README file, starting from there. If you wish to get your deltas via email: Send email to &a.majordomo; to subscribe to one of the CTM distribution lists. “ctm-cvs-cur” supports the entire cvs tree. “ctm-src-cur” supports the head of the development branch. “ctm-src-2_2” supports the 2.2 release branch, etc.. (If you do not know how to subscribe yourself using majordomo, send a message first containing the word help — it will send you back usage instructions.) When you begin receiving your CTM updates in the mail, you may use the ctm_rmail program to unpack and apply them. You can actually use the ctm_rmail program directly from a entry in /etc/aliases if you want to have the process run in a fully automated fashion. Check the ctm_rmail man page for more details. No matter what method you use to get the CTM deltas, you should subscribe to the ctm-announce@FreeBSD.org mailing list. In the future, this will be the only place where announcements concerning the operations of the CTM system will be posted. Send an email to &a.majordomo; with a single line of subscribe ctm-announce to get added to the list. Using <application>CTM</application> for the first time Before you can start using CTM deltas, you will need to get to a starting point for the deltas produced subsequently to it. First you should determine what you already have. Everyone can start from an “empty” directory. You must use an initial “Empty” delta to start off your CTM supported tree. At some point it is intended that one of these “started” deltas be distributed on the CD for your convenience, however, this does not currently happen. Since the trees are many tens of megabytes, you should prefer to start from something already at hand. If you have a -RELEASE CD, you can copy or extract an initial source from it. This will save a significant transfer of data. You can recognize these “starter” deltas by the X appended to the number (src-cur.3210XEmpty.gz for instance). The designation following the X corresponds to the origin of your initial “seed”. Empty is an empty directory. As a rule a base transition from Empty is produced every 100 deltas. By the way, they are large! 25 to 30 Megabytes of gzip'd data is common for the XEmpty deltas. Once you've picked a base delta to start from, you will also need all deltas with higher numbers following it. Using <application>CTM</application> in your daily life To apply the deltas, simply say: &prompt.root; cd /where/ever/you/want/the/stuff &prompt.root; ctm -v -v /where/you/store/your/deltas/src-xxx.* CTM understands deltas which have been put through gzip, so you do not need to gunzip them first, this saves disk space. Unless it feels very secure about the entire process, CTM will not touch your tree. To verify a delta you can also use the flag and CTM will not actually touch your tree; it will merely verify the integrity of the delta and see if it would apply cleanly to your current tree. There are other options to CTM as well, see the manual pages or look in the sources for more information. I would also be very happy if somebody could help with the “user interface” portions, as I have realized that I cannot make up my mind on what options should do what, how and when... That is really all there is to it. Every time you get a new delta, just run it through CTM to keep your sources up to date. Do not remove the deltas if they are hard to download again. You just might want to keep them around in case something bad happens. Even if you only have floppy disks, consider using fdwrite to make a copy. Keeping your local changes As a developer one would like to experiment with and change files in the source tree. CTM supports local modifications in a limited way: before checking for the presence of a file foo, it first looks for foo.ctm. If this file exists, CTM will operate on it instead of foo. This behavior gives us a simple way to maintain local changes: simply copy the files you plan to modify to the corresponding file names with a .ctm suffix. Then you can freely hack the code, while CTM keeps the .ctm file up-to-date. Other interesting <application>CTM</application> options Finding out exactly what would be touched by an update You can determine the list of changes that CTM will make on your source repository using the option to CTM. This is useful if you would like to keep logs of the changes, pre- or post- process the modified files in any manner, or just are feeling a tad paranoid :-). Making backups before updating Sometimes you may want to backup all the files that would be changed by a CTM update. Specifying the option causes CTM to backup all files that would be touched by a given CTM delta to backup-file. Restricting the files touched by an update Sometimes you would be interested in restricting the scope of a given CTM update, or may be interested in extracting just a few files from a sequence of deltas. You can control the list of files that CTM would operate on by specifying filtering regular expressions using the and options. For example, to extract an up-to-date copy of lib/libc/Makefile from your collection of saved CTM deltas, run the commands: &prompt.root; cd /where/ever/you/want/to/extract/it/ &prompt.root; ctm -e '^lib/libc/Makefile' ~ctm/src-xxx.* For every file specified in a CTM delta, the and options are applied in the order given on the command line. The file is processed by CTM only if it is marked as eligible after all the and options are applied to it. Future plans for <application>CTM</application> Tons of them: Use some kind of authentication into the CTM system, so as to allow detection of spoofed CTM updates. Clean up the options to CTM, they became confusing and counter intuitive. Miscellaneous stuff There is a sequence of deltas for the ports collection too, but interest has not been all that high yet. Tell me if you want an email list for that too and we will consider setting it up. CTM mirrors CTM/FreeBSD is available via anonymous FTP from the following mirror sites. If you choose to obtain CTM via anonymous FTP, please try to use a site near you. In case of problems, please contact &a.phk;. California, Bay Area, official source ftp://ftp.FreeBSD.org/pub/FreeBSD/development/CTM/ Germany, Trier ftp://ftp.uni-trier.de/pub/unix/systems/BSD/FreeBSD/CTM/ South Africa, backup server for old deltas ftp://ftp.za.FreeBSD.org/pub/FreeBSD/CTM/ Taiwan/R.O.C, Chiayi ftp://ctm.tw.FreeBSD.org/pub/FreeBSD/CTM/ ftp://ctm2.tw.FreeBSD.org/pub/FreeBSD/CTM/ ftp://ctm3.tw.FreeBSD.org/pub/freebsd/CTM/ If you did not find a mirror near to you or the mirror is incomplete, try FTP search at http://ftpsearch.ntnu.no/ftpsearch. FTP search is a great free archie server in Trondheim, Norway. Using CVSup Introduction CVSup is a software package for distributing and updating source trees from a master CVS repository on a remote server host. The FreeBSD sources are maintained in a CVS repository on a central development machine in California. With CVSup, FreeBSD users can easily keep their own source trees up to date. CVSup uses the so-called pull model of updating. Under the pull model, each client asks the server for updates, if and when they are wanted. The server waits passively for update requests from its clients. Thus all updates are instigated by the client. The server never sends unsolicited updates. Users must either run the CVSup client manually to get an update, or they must set up a cron job to run it automatically on a regular basis. The term CVSup, capitalized just so, refers to the entire software package. Its main components are the client cvsup which runs on each user's machine, and the server cvsupd which runs at each of the FreeBSD mirror sites. As you read the FreeBSD documentation and mailing lists, you may see references to sup. Sup was the predecessor of CVSup, and it served a similar purpose.CVSup is in used in much the same way as sup and, in fact, uses configuration files which are backward-compatible with sup's. Sup is no longer used in the FreeBSD project, because CVSup is both faster and more flexible. Installation The easiest way to install CVSup is to use the net/cvsup-bin port from the FreeBSD ports collection. If you prefer to build CVSup from source, you can use the net/cvsup port instead. But be forewarned: the net/cvsup port depends on the Modula-3 system, which takes a substantial amount of time, memory, and disk space to build. If you do not know anything about cvsup at all and want a single package which will install it, set up the configuration file and start the transfer via a pointy-clicky type of interface, then get the cvsupit package. Just hand it to &man.pkg.add.1; and it will lead you through the configuration process in a menu-oriented fashion. CVSup Configuration CVSup's operation is controlled by a configuration file called the supfile. There are some sample supfiles in the directory /usr/share/examples/cvsup/. The information in a supfile answers the following questions for cvsup: Which files do you want to receive? Which versions of them do you want? Where do you want to get them from? Where do you want to put them on your own machine? Where do you want to put your status files? In the following sections, we will construct a typical supfile by answering each of these questions in turn. First, we describe the overall structure of a supfile. A supfile is a text file. Comments begin with # and extend to the end of the line. Lines that are blank and lines that contain only comments are ignored. Each remaining line describes a set of files that the user wishes to receive. The line begins with the name of a collection, a logical grouping of files defined by the server. The name of the collection tells the server which files you want. After the collection name come zero or more fields, separated by white space. These fields answer the questions listed above. There are two types of fields: flag fields and value fields. A flag field consists of a keyword standing alone, e.g., delete or compress. A value field also begins with a keyword, but the keyword is followed without intervening white space by = and a second word. For example, release=cvs is a value field. A supfile typically specifies more than one collection to receive. One way to structure a supfile is to specify all of the relevant fields explicitly for each collection. However, that tends to make the supfile lines quite long, and it is inconvenient because most fields are the same for all of the collections in a supfile. CVSup provides a defaulting mechanism to avoid these problems. Lines beginning with the special pseudo-collection name *default can be used to set flags and values which will be used as defaults for the subsequent collections in the supfile. A default value can be overridden for an individual collection, by specifying a different value with the collection itself. Defaults can also be changed or augmented in mid-supfile by additional *default lines. With this background, we will now proceed to construct a supfile for receiving and updating the main source tree of FreeBSD-CURRENT. Which files do you want to receive? The files available via CVSup are organized into named groups called collections. The collections that are available are described here. In this example, we wish to receive the entire main source tree for the FreeBSD system. There is a single large collection src-all which will give us all of that. As a first step toward constructing our supfile, we simply list the collections, one per line (in this case, only one line): src-all Which version(s) of them do you want? With CVSup, you can receive virtually any version of the sources that ever existed. That is possible because the cvsupd server works directly from the CVS repository, which contains all of the versions. You specify which one of them you want using the tag= and value fields. Be very careful to specify any tag= fields correctly. Some tags are valid only for certain collections of files. If you specify an incorrect or misspelled tag, CVSup will delete files which you probably do not want deleted. In particular, use only tag=. for the ports-* collections. The tag= field names a symbolic tag in the repository. There are two kinds of tags, revision tags and branch tags. A revision tag refers to a specific revision. Its meaning stays the same from day to day. A branch tag, on the other hand, refers to the latest revision on a given line of development, at any given time. Because a branch tag does not refer to a specific revision, it may mean something different tomorrow than it means today. Here are the branch tags that users might be interested in. Keep in mind that only the tag=. is relevant for the ports collection. tag=. The main line of development, also known as FreeBSD-CURRENT. The . is not punctuation; it is the name of the tag. Valid for all collections. tag=RELENG_4 The line of development for FreeBSD-4.X, also known as FreeBSD-STABLE. tag=RELENG_3 The line of development for FreeBSD-3.X tag=RELENG_2_2 The line of development for FreeBSD-2.2.X, also known as 2.2-STABLE. Here are the revision tags that users might be interested in. Again, these are not valid for the ports collection. tag=RELENG_4_0_0_RELEASE FreeBSD-4.0 tag=RELENG_3_4_0_RELEASE FreeBSD-3.4. tag=RELENG_3_3_0_RELEASE FreeBSD-3.3. tag=RELENG_3_2_0_RELEASE FreeBSD-3.2. tag=RELENG_3_1_0_RELEASE FreeBSD-3.1. tag=RELENG_3_0_0_RELEASE FreeBSD-3.0. tag=RELENG_2_2_8_RELEASE FreeBSD-2.2.8. tag=RELENG_2_2_7_RELEASE FreeBSD-2.2.7. tag=RELENG_2_2_6_RELEASE FreeBSD-2.2.6. tag=RELENG_2_2_5_RELEASE FreeBSD-2.2.5. tag=RELENG_2_2_2_RELEASE FreeBSD-2.2.2. tag=RELENG_2_2_1_RELEASE FreeBSD-2.2.1. tag=RELENG_2_2_0_RELEASE FreeBSD-2.2.0. Be very careful to type the tag name exactly as shown. CVSup cannot distinguish between valid and invalid tags. If you misspell the tag, CVSup will behave as though you had specified a valid tag which happens to refer to no files at all. It will delete your existing sources in that case. When you specify a branch tag, you normally receive the latest versions of the files on that line of development. If you wish to receive some past version, you can do so by specifying a date with the value field. The &man.cvsup.1; manual page explains how to do that. For our example, we wish to receive FreeBSD-CURRENT. We add this line at the beginning of our supfile: *default tag=. There is an important special case that comes into play if you specify neither a tag= field nor a date= field. In that case, you receive the actual RCS files directly from the server's CVS repository, rather than receiving a particular version. Developers generally prefer this mode of operation. By maintaining a copy of the repository itself on their systems, they gain the ability to browse the revision histories and examine past versions of files. This gain is achieved at a large cost in terms of disk space, however. Where do you want to get them from? We use the host= field to tell cvsup where to obtain its updates. Any of the CVSup mirror sites will do, though you should try to select one that is close to you in cyberspace. In this example we will use a fictional FreeBSD distribution site, cvsup666.FreeBSD.org: *default host=cvsup666.FreeBSD.org You will need to change the host to one that actually exists before running CVSup. On any particular run of cvsup, you can override the host setting on the command line, with . Where do you want to put them on your own machine? The prefix= field tells cvsup where to put the files it receives. In this example, we will put the source files directly into our main source tree, /usr/src. The src directory is already implicit in the collections we have chosen to receive, so this is the correct specification: *default prefix=/usr Where should cvsup maintain its status files? The cvsup client maintains certain status files in what is called the base directory. These files help CVSup to work more efficiently, by keeping track of which updates you have already received. We will use the standard base directory, /usr/local/etc/cvsup: *default base=/usr/local/etc/cvsup This setting is used by default if it is not specified in the supfile, so we actually do not need the above line. If your base directory does not already exist, now would be a good time to create it. The cvsup client will refuse to run if the base directory does not exist. Miscellaneous supfile settings: There is one more line of boiler plate that normally needs to be present in the supfile: *default release=cvs delete use-rel-suffix compress release=cvs indicates that the server should get its information out of the main FreeBSD CVS repository. This is virtually always the case, but there are other possibilities which are beyond the scope of this discussion. delete gives CVSup permission to delete files. You should always specify this, so that CVSup can keep your source tree fully up-to-date. CVSup is careful to delete only those files for which it is responsible. Any extra files you happen to have will be left strictly alone. use-rel-suffix is ... arcane. If you really want to know about it, see the &man.cvsup.1; manual page. Otherwise, just specify it and do not worry about it. compress enables the use of gzip-style compression on the communication channel. If your network link is T1 speed or faster, you probably should not use compression. Otherwise, it helps substantially. Putting it all together: Here is the entire supfile for our example: *default tag=. *default host=cvsup666.FreeBSD.org *default prefix=/usr *default base=/usr/local/etc/cvsup *default release=cvs delete use-rel-suffix compress src-all The refuse file As mentioned above, CVSup uses a pull method. Basically, this means that you connect to the CVSup server, and it says, Here's what you can download from me..., and your client responds OK, I'll take this, this, this, and this. In the default configuration, the CVSup client will take every file associated with the collection and tag you chose in the configuration file. However, this is not always what you want, especially if you are synching the doc, ports, or www trees — most people can't read four or five languages, and therefore they don't need to download the language-specific files. If you are CVSuping the ports collection, you can get around this by specifying each collection individually (e.g., ports-astrology, ports-biology, etc instead of simply saying ports-all). However, since the doc and www trees do not have language-specific collections, you must use one of CVSup's many nifty features; the refuse file. The refuse file essentially tells CVSup that it should not take every single file from a collection; in other words, it tells the client to refuse certain files from the server. The refuse file can be found (or, if you do not yet have one, should be placed) in base/sup/refuse. base is defined in your supfile; by default, base is /usr/sup, which means that by default the refuse file is in /usr/sup/refuse. The refuse file has a very simple format; it simply contains the names of files or directories that you do not wish to to download. For example, since I cannot speak any languages except for English and some German, and I do not feel the need to use German applications, I have the following in my refuse file: ports/chinese ports/german ports/japanese ports/korean ports/russian ports/vietnamese doc/es_ES.ISO_8859-1 doc/ja_JP.eucJP and so forth for the other languages. Note that the name of the repository is the first directory in the refuse file. With this very useful feature, those users who are on slow links or pay by the minute for their Internet connection will be able to save valuable time as they will no longer need to download files that they will never use. For more information on refuse files and other neat features of CVSup, please view its man page. Running <application>CVSup</application> You are now ready to try an update. The command line for doing this is quite simple: &prompt.root; cvsup supfile where supfile is of course the name of the supfile you have just created. Assuming you are running under X11, cvsup will display a GUI window with some buttons to do the usual things. Press the go button, and watch it run. Since you are updating your actual /usr/src tree in this example, you will need to run the program as root so that cvsup has the permissions it needs to update your files. Having just created your configuration file, and having never used this program before, that might understandably make you nervous. There is an easy way to do a trial run without touching your precious files. Just create an empty directory somewhere convenient, and name it as an extra argument on the command line: &prompt.root; mkdir /var/tmp/dest &prompt.root; cvsup supfile /var/tmp/dest The directory you specify will be used as the destination directory for all file updates. CVSup will examine your usual files in /usr/src, but it will not modify or delete any of them. Any file updates will instead land in /var/tmp/dest/usr/src. CVSup will also leave its base directory status files untouched when run this way. The new versions of those files will be written into the specified directory. As long as you have read access to /usr/src, you do not even need to be root to perform this kind of trial run. If you are not running X11 or if you just do not like GUIs, you should add a couple of options to the command line when you run cvsup: &prompt.root; cvsup -g -L 2 supfile The tells cvsup not to use its GUI. This is automatic if you are not running X11, but otherwise you have to specify it. The tells cvsup to print out the details of all the file updates it is doing. There are three levels of verbosity, from to . The default is 0, which means total silence except for error messages. There are plenty of other options available. For a brief list of them, type cvsup -H. For more detailed descriptions, see the manual page. Once you are satisfied with the way updates are working, you can arrange for regular runs of cvsup using &man.cron.8;. Obviously, you should not let cvsup use its GUI when running it from cron. <application>CVSup</application> File Collections The file collections available via CVSup are organized hierarchically. There are a few large collections, and they are divided into smaller sub-collections. Receiving a large collection is equivalent to receiving each of its sub-collections. The hierarchical relationships among collections are reflected by the use of indentation in the list below. The most commonly used collections are src-all, and ports-all. The other collections are used only by small groups of people for specialized purposes, and some mirror sites may not carry all of them. cvs-all release=cvs The main FreeBSD CVS repository, including the cryptography code. distrib release=cvs Files related to the distribution and mirroring of FreeBSD. doc-all release=cvs Sources for the FreeBSD handbook and other documentation. ports-all release=cvs The FreeBSD ports collection. ports-archivers release=cvs Archiving tools. ports-astro release=cvs Astronomical ports. ports-audio release=cvs Sound support. ports-base release=cvs Miscellaneous files at the top of /usr/ports. ports-benchmarks release=cvs Benchmarks. ports-biology release=cvs Biology. ports-cad release=cvs Computer aided design tools. ports-chinese release=cvs Chinese language support. ports-comms release=cvs Communication software. ports-converters release=cvs character code converters. ports-databases release=cvs Databases. ports-deskutils release=cvs Things that used to be on the desktop before computers were invented. ports-devel release=cvs Development utilities. ports-editors release=cvs Editors. ports-emulators release=cvs Emulators for other operating systems. ports-ftp release=cvs FTP client and server utilities. ports-games release=cvs Games. ports-german release=cvs German language support. ports-graphics release=cvs Graphics utilities. ports-irc release=cvs Internet Relay Chat utilities. ports-japanese release=cvs Japanese language support. ports-java release=cvs Java utilities. ports-korean release=cvs Korean language support. ports-lang release=cvs Programming languages. ports-mail release=cvs Mail software. ports-math release=cvs Numerical computation software. ports-mbone release=cvs MBone applications. ports-misc release=cvs Miscellaneous utilities. ports-net release=cvs Networking software. ports-news release=cvs USENET news software. ports-palm release=cvs Software support for 3Com Palm(tm) series. ports-print release=cvs Printing software. ports-russian release=cvs Russian language support. ports-security release=cvs Security utilities. ports-shells release=cvs Command line shells. ports-sysutils release=cvs System utilities. ports-textproc release=cvs text processing utilities (does not include desktop publishing). ports-vietnamese release=cvs Vietnamese language support. ports-www release=cvs Software related to the World Wide Web. ports-x11 release=cvs Ports to support the X window system. ports-x11-clocks release=cvs X11 clocks. ports-x11-fm release=cvs X11 file managers. ports-x11-fonts release=cvs X11 fonts and font utilities. ports-x11-toolkits release=cvs X11 toolkits. ports-x11-servers X11 servers. ports-x11-wm X11 window managers. src-all release=cvs The main FreeBSD sources, including the cryptography code. src-base release=cvs Miscellaneous files at the top of /usr/src. src-bin release=cvs User utilities that may be needed in single-user mode (/usr/src/bin). src-contrib release=cvs Utilities and libraries from outside the FreeBSD project, used relatively unmodified (/usr/src/contrib). src-crypto release=cvs Cryptography utilities and libraries from outside the FreeBSD project, used relatively unmodified (/usr/src/crypto). src-eBones release=cvs Kerberos and DES (/usr/src/eBones). Not used in current releases of FreeBSD. src-etc release=cvs System configuration files (/usr/src/etc). src-games release=cvs Games (/usr/src/games). src-gnu release=cvs Utilities covered by the GNU Public License (/usr/src/gnu). src-include release=cvs Header files (/usr/src/include). src-kerberos5 release=cvs Kerberos5 security package (/usr/src/kerberos5). src-kerberosIV release=cvs KerberosIV security package (/usr/src/kerberosIV). src-lib release=cvs Libraries (/usr/src/lib). src-libexec release=cvs System programs normally executed by other programs (/usr/src/libexec). src-release release=cvs Files required to produce a FreeBSD release (/usr/src/release). src-secure release=cvs DES (/usr/src/secure). src-sbin release=cvs System utilities for single-user mode (/usr/src/sbin). src-share release=cvs Files that can be shared across multiple systems (/usr/src/share). src-sys release=cvs The kernel (/usr/src/sys). src-sys-crypto release=cvs Kernel cryptography code (/usr/src/sys/crypto). src-tools release=cvs Various tools for the maintenance of FreeBSD (/usr/src/tools). src-usrbin release=cvs User utilities (/usr/src/usr.bin). src-usrsbin release=cvs System utilities (/usr/src/usr.sbin). www release=cvs The sources for the World Wide Web data. distrib release=self The CVSup server's own configuration files. Used by CVSup mirror sites. gnats release=current The GNATS bug-tracking database. mail-archive release=current FreeBSD mailing list archive. www release=current The installed World Wide Web data. Used by WWW mirror sites. For more information For the CVSup FAQ and other information about CVSup, see The CVSup Home Page. Most FreeBSD-related discussion of CVSup takes place on the &a.hackers;. New versions of the software are announced there, as well as on the &a.announce;. Questions and bug reports should be addressed to the author of the program at cvsup-bugs@polstra.com. CVSup Sites CVSup servers for FreeBSD are running at the following sites: Argentina cvsup.ar.FreeBSD.org (maintainer msagre@cactus.fi.uba.ar) Australia cvsup.au.FreeBSD.org (maintainer dawes@xfree86.org) cvsup3.au.FreeBSD.org (maintainer FreeBSD@admin.gil.com.au) Austria cvsup.at.FreeBSD.org (maintainer postmaster@wu-wien.ac.at) Brazil cvsup.br.FreeBSD.org (maintainer cvsup@cvsup.br.FreeBSD.org) cvsup2.br.FreeBSD.org (maintainer tps@ti.sk) cvsup3.br.FreeBSD.org (maintainer camposr@matrix.com.br) Canada cvsup.ca.FreeBSD.org (maintainer dan@jaded.net) cvsup2.ca.FreeBSD.org (maintainer mitayai@dreaming.org) China cvsup.cn.FreeBSD.org (maintainer phj@cn.FreeBSD.org) Czech Republic cvsup.cz.FreeBSD.org (maintainer cejkar@dcse.fee.vutbr.cz) Denmark cvsup.dk.FreeBSD.org (maintainer jesper@skriver.dk) Estonia cvsup.ee.FreeBSD.org (maintainer taavi@uninet.ee) Finland cvsup.fi.FreeBSD.org (maintainer count@key.sms.fi) cvsup2.fi.FreeBSD.org (maintainer count@key.sms.fi) France cvsup.fr.FreeBSD.org (maintainer hostmaster@fr.FreeBSD.org) cvsup2.fr.FreeBSD.org (maintainer ftpmaint@uvsq.fr) Germany cvsup.de.FreeBSD.org (maintainer wosch@FreeBSD.org) cvsup2.de.FreeBSD.org (maintainer petzi@FreeBSD.org) cvsup3.de.FreeBSD.org (maintainer ag@leo.org) cvsup4.de.FreeBSD.org (maintainer cvsup@cosmo-project.de) Iceland cvsup.is.FreeBSD.org (maintainer adam@veda.is) Japan cvsup.jp.FreeBSD.org (maintainer cvsupadm@jp.FreeBSD.org) cvsup2.jp.FreeBSD.org (maintainer max@FreeBSD.org) cvsup3.jp.FreeBSD.org (maintainer shige@cin.nihon-u.ac.jp) cvsup4.jp.FreeBSD.org (maintainer cvsup-admin@ftp.media.kyoto-u.ac.jp) cvsup5.jp.FreeBSD.org (maintainer cvsup@imasy.or.jp) cvsup6.jp.FreeBSD.org (maintainer cvsupadm@jp.FreeBSD.org) Korea cvsup.kr.FreeBSD.org (maintainer cjh@kr.FreeBSD.org) cvsup2.kr.FreeBSD.org (maintainer holywar@mail.holywar.net) Netherlands cvsup.nl.FreeBSD.org (maintainer xaa@xaa.iae.nl) cvsup2.nl.FreeBSD.org (maintainer cvsup@nl.uu.net) Norway cvsup.no.FreeBSD.org (maintainer Per.Hove@math.ntnu.no) Poland cvsup.pl.FreeBSD.org (maintainer Mariusz@kam.pl) Portugal cvsup.pt.FreeBSD.org (maintainer jpedras@webvolution.net) Russia cvsup.ru.FreeBSD.org (maintainer ache@nagual.pp.ru) cvsup2.ru.FreeBSD.org (maintainer dv@dv.ru) cvsup3.ru.FreeBSD.org (maintainer fjoe@iclub.nsu.ru) Slovak Republic cvsup.sk.FreeBSD.org (maintainer tps@tps.sk) cvsup2.sk.FreeBSD.org (maintainer tps@tps.sk) Slovenia cvsup.si.FreeBSD.org (maintainer blaz@si.FreeBSD.org) South Africa cvsup.za.FreeBSD.org (maintainer markm@FreeBSD.org) cvsup2.za.FreeBSD.org (maintainer markm@FreeBSD.org) Spain cvsup.es.FreeBSD.org (maintainer jesusr@FreeBSD.org) Sweden cvsup.se.FreeBSD.org (maintainer pantzer@ludd.luth.se) Taiwan cvsup.tw.FreeBSD.org (maintainer jdli@freebsd.csie.nctu.edu.tw) cvsup2.tw.FreeBSD.org (maintainer ycheng@sinica.edu.tw) cvsup3.tw.FreeBSD.org (maintainer foxfair@FreeBSD.org) Ukraine cvsup2.ua.FreeBSD.org (maintainer freebsd-mnt@lucky.net) cvsup3.ua.FreeBSD.org (maintainer ftpmaster@ukr.net), Kiev cvsup4.ua.FreeBSD.org (maintainer phantom@cris.net) United Kingdom cvsup.uk.FreeBSD.org (maintainer joe@pavilion.net) cvsup2.uk.FreeBSD.org (maintainer brian@FreeBSD.org) cvsup3.uk.FreeBSD.org (maintainer ftp-admin@plig.net) USA cvsup1.FreeBSD.org (maintainer skynyrd@opus.cts.cwu.edu), Washington state cvsup2.FreeBSD.org (maintainer jdp@FreeBSD.org), California cvsup3.FreeBSD.org (maintainer wollman@FreeBSD.org), Massachusetts cvsup4.FreeBSD.org (maintainer rgrimes@FreeBSD.org), Oregon cvsup5.FreeBSD.org (maintainer mjr@blackened.com), Arizona cvsup7.FreeBSD.org (maintainer jdp@FreeBSD.org), Washington state cvsup8.FreeBSD.org (maintainer hostmaster@bigmirror.com), Washington state The following CVSup site is especially designed for CTM users. Unlike the other CVSup mirrors, it is kept up-to-date by CTM. That means if you CVSup cvs-all with release=cvs from this site, you get a version of the repository (including the inevitable .ctm_status file) which is suitable for being updated using the CTM cvs-cur deltas. This allows users who track the entire cvs-all tree to go from CVSup to CTM without having to rebuild their repository from scratch using a fresh CTM base delta. This special feature only works for the cvs-all distribution with cvs as the release tag. CVSupping any other distribution and/or release will get you the specified distribution, but it will not be suitable for CTM updating. Because the current version of CTM does not preserve the time stamps of files, the time stamps at this mirror site are not the same as those at other mirror sites. Switching between this site and other sites is not recommended. It will work correctly, but will be somewhat inefficient. Germany ctm.FreeBSD.org (maintainer blank@fox.uni-trier.de) AFS Sites AFS servers for FreeBSD are running at the following sites; Sweden The path to the files are: /afs/stacken.kth.se/ftp/pub/FreeBSD/ stacken.kth.se # Stacken Computer Club, KTH, Sweden 130.237.234.43 #hot.stacken.kth.se 130.237.237.230 #fishburger.stacken.kth.se 130.237.234.3 #milko.stacken.kth.se Maintainer ftp@stacken.kth.se