diff --git a/devel/openocd/Makefile b/devel/openocd/Makefile
index cc2e2184e4ce..76b3874dbf24 100644
--- a/devel/openocd/Makefile
+++ b/devel/openocd/Makefile
@@ -1,98 +1,101 @@
 PORTNAME=	openocd
 DISTVERSION=	0.12.0
-PORTREVISION=	2
+PORTREVISION=	3
 CATEGORIES=	devel
 MASTER_SITES=	SF
 
 MAINTAINER=	jbo@FreeBSD.org
 COMMENT=	Open On-Chip Debugger
 WWW=		https://openocd.sf.net
 
 LICENSE=	GPLv2
 LICENSE_FILE=	${WRKSRC}/COPYING
 
 # Note: A local patch would be feasible but upstream has removed support for the offending feature
 #       implementation since their last release (0.12.0). As such, this will no longer be relevant
 #       from 0.13.0 onwards. Hence we're not addressing this "limitation" right now.
 BROKEN_aarch64=	fails to build: src/target/nds32_tlb.h:25:2: error: expected identifier PAGE_SIZE_4K = 0
 
 USES=		gmake libtool makeinfo pkgconfig tar:bzip2
 GNU_CONFIGURE=	yes
 GNU_CONFIGURE_MANPREFIX=	${PREFIX}/share
 
+# Required to make OpenOCD's internal libjaylink work
+CONFIGURE_ENV+=	libusb_CFLAGS=" " libusb_LIBS="-lusb"
+
 CFLAGS+=	-Wno-error=strict-prototypes \
 		-Wno-error=unused-but-set-parameter \
 		-Wno-error=unused-but-set-variable \
 
 INFO=		openocd
 
 # Note: Some adapters are not supported or do not currently work on FreeBSD.
 #       These have been consciously left out of this port entirely.
 
 OPTIONS_DEFAULT=	JIMTCL_INTERNAL LIBUSB LIBHIDAPI LIBFTDI SERIAL
 OPTIONS_GROUP=		DEBUG ADAPTERS
 OPTIONS_GROUP_ADAPTERS=	LIBUSB LIBHIDAPI LIBFTDI SERIAL PARPORT
 OPTIONS_GROUP_DEBUG=	VERBOSE_JTAGIO VERBOSE_USBIO VERBOSE_USBCOMM
 OPTIONS_SINGLE=		JIMTCL
 OPTIONS_SINGLE_JIMTCL=	JIMTCL_INTERNAL JIMTCL_EXTERNAL
 
 ADAPTERS_DESC=		Hardware adapters/programmers/debuggers support
 JIMTCL_DESC=		Jim Tcl interpreter
 JIMTCL_EXTERNAL_DESC=	External
 JIMTCL_INTERNAL_DESC=	Internal
 LIBFTDI_DESC=		Adapters using libftdi
 LIBHIDAPI_DESC=		Adapters using libhidapi
 LIBUSB_DESC=		Adapters using libusb
 PARPORT_DESC=		Adapters using parallel port
 SERIAL_DESC=		Adapters using serial port
 VERBOSE_JTAGIO_DESC=	Enable verbose JTAG I/O messages
 VERBOSE_USBCOMM_DESC=	Enable verbose USB communication messages
 VERBOSE_USBIO_DESC=	Enable verbose USB I/O messages
 
 # Internal (built-in) or external Jim Tcl interpreter
 JIMTCL_EXTERNAL_LIB_DEPENDS=		libjim.so:lang/jimtcl
 JIMTCL_EXTERNAL_USES=			localbase:ldflags
 JIMTCL_INTERNAL_CONFIGURE_ENABLE=	internal-jimtcl
 
 # Adapters depending on libftdi
 LIBFTDI_LIB_DEPENDS=		libftdi.so:devel/libftdi
 LIBFTDI_CONFIGURE_ENABLE=	usb_blaster \
 				presto \
 				openjtag
 
 # Adapters depending on libhidapi
 LIBHIDAPI_LIB_DEPENDS=		libhidapi.so:comms/hidapi
 LIBHIDAPI_CONFIGURE_ENABLE=	cmsis_dap \
 				nulink \
 				kitprog
 
 # Adapters depending on libusb
 LIBUSB_CONFIGURE_ENABLE=	ftdi \
 				stlink \
 				ti_icdi \
 				ulink \
 				angie \
 				usb_blaster_2 \
 				ft232r \
 				vsllink \
 				xds110 \
 				cmsis_dap_v2 \
 				osbdm \
 				opendous \
 				armjtagew \
 				rlink \
 				usbprog \
 				esp_usb_jtag
 
 # Parallel port based adapters
 PARPORT_CONFIGURE_ENABLE=	parport
 
 # Serial port based adapters
 SERIAL_CONFIGURE_ENABLE=	buspirate
 
 # Debug options
 VERBOSE_JTAGIO_CONFIGURE_ENABLE=	verbose
 VERBOSE_USBCOMM_CONFIGURE_ENABLE=	verbose-usb-comms
 VERBOSE_USBIO_CONFIGURE_ENABLE=		verbose-usb-io
 
 .include <bsd.port.mk>