diff --git a/Mk/Uses/ruby.mk b/Mk/Uses/ruby.mk
index 9aee42814ac0..bce78c7ed640 100644
--- a/Mk/Uses/ruby.mk
+++ b/Mk/Uses/ruby.mk
@@ -1,357 +1,357 @@
 # Provide support for Ruby releated ports.
 #
 # Feature:		ruby
 # Usage:		USES=ruby[:args,..]
 # Valid ARGS:		build, extconf, run, setup
 # ARGS description:
 # build			Says that ruby is required only for build time.
 # extconf		Says that the port uses extconf.rb to configure.
 # none			Says that no dependency is added to the port.
 #			Intended to be used with lang/ruby*.
 # run			Says that ruby is required only for run time.
 # setup			Says that the port uses setup.rb to configure and
 #			build.
 #
 # [variables that a user may define]
 #
 # RUBY_VER		- (See below)
 # RUBY_DEFAULT_VER	- Set to (e.g.) "3.1" if you want to refer to "ruby31"
 #			  just as "ruby".
 # RUBY_ARCH		- (See below)
 #
 # [variables that each port can define]
 #
 # RUBY			- Set to full path of ruby.  If you set this, the values
 #			  of the following variables are automatically obtained
 #			  from the ruby executable: RUBY_VER, RUBY_VERSION,
 #			  RUBY_ARCH, RUBY_LIBDIR, RUBY_ARCHLIBDIR,
 #			  RUBY_SITELIBDIR, and RUBY_SITEARCHLIBDIR.
 # RUBY_VER		- Set to the alternative short version of ruby in the
 #			  form of `x.y' (see below for current value).
 # RUBY_EXTCONF		- Set to the alternative name of extconf.rb
 #			  (default: extconf.rb).
 # RUBY_EXTCONF_SUBDIRS	- Set to list of subdirectories, if multiple modules
 #			  are included.
 # RUBY_SETUP		- Set to the alternative name of setup.rb
 #			  (default: setup.rb).
 #
 # [variables that each port should not (re)define]
 #
 # RUBY_PKGNAMEPREFIX	- Common PKGNAMEPREFIX for ruby ports
 #			  (default: ruby${RUBY_SUFFIX}-)
 # RUBY_VERSION		- Full version of ruby without preview/beta suffix in
 #			  the form of `x.y.z' (see below for current value).
 # RUBY_VERSION_CODE	- Integer version of RUBY_VERSION in the form of
 #			  `xyz'.
 # RUBY_DISTVERSION	- DISTVERSION for the standard ruby ports (ruby,
 #			  ruby-gdbm, etc.).
 # RUBY_PORTVERSION	- PORTVERSION for the standard ruby ports (ruby,
 #			  ruby-gdbm, etc.).
 # RUBY_PORTREVISION	- PORTREVISION for the standard ruby ports.
 # RUBY_PORTEPOCH	- PORTEPOCH for the standard ruby ports.
 # RUBY_DISTNAME		- DISTNAME for the standard ruby ports, i.e. the
 #			  basename of the ruby distribution tarball.
 # RUBY_PATCHFILES	- PATCHFILES for the standard ruby ports, i.e. the
 #			  basename of the ruby distribution tarball.
 # RUBY_WRKSRC		- WRKSRC for the ruby port.
 # MASTER_SITE_SUBDIR_RUBY	- MASTER_SITE_SUBDIR for the ruby distfiles.
 #
 # RUBY_SHLIBVER		- Major version of libruby (see below for current
 #			  value).
 # RUBY_ARCH		- Set to target architecture name.
 #			  (e.g. i386-freebsd7)
 # RUBY_SUFFIX		- Suffix for ruby binaries and directories
 #			  (${RUBY_VER:S/.//}).
 # RUBY_WITHOUT_SUFFIX	- Always ${LOCALBASE}/bin/ruby.
 # RUBY_WITH_SUFFIX	- Always ${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}.
 #
 # RUBY_MODNAME		- Set to the module name (default: ${PORTNAME}).
 #
 # RUBY_BASE_PORT	- Port path of base ruby without PORTSDIR, without
 #			  suffix except version.
 # RUBY_PORT		- Port path of ruby without PORTSDIR.
 #
 # DEPEND_RUBY		- BUILD_DEPENDS/RUN_DEPENDS entry for ruby.
 #
 # RUBY_LIBDIR		- Installation path for architecture independent
 #			  libraries.
 # RUBY_ARCHLIBDIR	- Installation path for architecture dependent
 #			  libraries.
 # RUBY_SITELIBDIR	- Installation path for site architecture independent
 #			  libraries.
 # RUBY_SITEARCHLIBDIR	- Installation path for site architecture dependent
 #			  libraries.
 # RUBY_DOCDIR		- Installation path for documents.
 # RUBY_EXAMPLESDIR	- Installation path for examples.
 # RUBY_RIDIR		- Installation path for site architecture independent ri
 #			  documents.
 # RUBY_SITERIDIR	- Installation path for site architecture dependent ri
 #			  documents.
 # RUBY_MODDOCDIR	- Installation path for the module's documents.
 # RUBY_MODEXAMPLESDIR	- Installation path for the module's examples.
 #
 # MAINTAINER:		ruby@FreeBSD.org
 
 .if !defined(_INCLUDE_USES_RUBY_MK)
 _INCLUDE_USES_RUBY_MK=	yes
 
 _valid_ARGS=		build extconf none run setup
 
 # "USES=gem" implies "USES=ruby"
 .  if defined(_INCLUDE_USES_GEM_MK)
 ruby_ARGS=
 .  endif
 
 # Sanity check
 .  for arg in ${ruby_ARGS}
 .    if empty(_valid_ARGS:M${arg})
 IGNORE= Incorrect 'USES+= ruby:${ruby_ARGS}' usage: argument [${arg}] is not recognized
 .    endif
 .  endfor
 
 
 .  if defined(RUBY_DEFAULT_VER)
 WARNING+=	"RUBY_DEFAULT_VER is defined, consider using DEFAULT_VERSIONS=ruby=${RUBY_DEFAULT_VER} instead"
 .  endif
 
 RUBY_DEFAULT_VER?=	${RUBY_DEFAULT}
 
 RUBY_VER?=		${RUBY_DEFAULT_VER}
 
 .  if defined(RUBY)
 .    if !exists(${RUBY})
 IGNORE=	cannot install: you set the variable RUBY to "${RUBY}", but it does not seem to exist.  Please specify an already installed ruby executable
 .    endif
 
 _RUBY_TEST!=		${RUBY} -e 'begin; require "rbconfig"; puts "ok" ; rescue LoadError; puts "error"; end'
 .    if !empty(_RUBY_TEST) && ${_RUBY_TEST} != "ok"
 IGNORE=	cannot install: you set the variable RUBY to "${RUBY}", but it failed to include rbconfig.  Please specify a properly installed ruby executable
 .    endif
 
 _RUBY_CONFIG=		${RUBY} -r rbconfig -e 'C = RbConfig::CONFIG' -e
 
 RUBY_VERSION!=		${_RUBY_CONFIG} 'puts C["ruby_version"]'
 RUBY_SUFFIX?=		# empty
 
 RUBY_ARCH!=		${_RUBY_CONFIG} 'puts C["target"]'
 
 _RUBY_SYSLIBDIR!=	${_RUBY_CONFIG} 'puts C["libdir"]'
 _RUBY_SITEDIR!=		${_RUBY_CONFIG} 'puts C["sitedir"]'
 _RUBY_VENDORDIR!=	${_RUBY_CONFIG} 'puts C["vendordir"]'
 .  else
 RUBY?=			${LOCALBASE}/bin/ruby${RUBY_SUFFIX}
 
 .    if defined(RUBY_VER)
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
 .      if ${RUBY_VER} == 3.0
 #
 # Ruby 3.0
 #
 RUBY_DISTVERSION=	3.0.6
-RUBY_PORTREVISION=	0
+RUBY_PORTREVISION=	1
 .      elif ${RUBY_VER} == 3.1
 #
 # Ruby 3.1
 #
 RUBY_DISTVERSION=	3.1.4
 RUBY_PORTREVISION=	0
 
 .      elif ${RUBY_VER} == 3.2
 #
 # Ruby 3.2
 #
 RUBY_DISTVERSION=	3.2.2
 RUBY_PORTREVISION=	0
 
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
 .      else
 #
 # Other versions
 #
 IGNORE=	Only ruby 3.0, 3.1 and 3.2 are supported
 _INVALID_RUBY_VER=	1
 .      endif
 RUBY_PORTEPOCH=		1
 RUBY_VERSION=	${RUBY_DISTVERSION:C/^([0-9]+\.[0-9]+\.[0-9]+).*/\1/}
 .    endif # defined(RUBY_VER)
 
 .    if !defined(_INVALID_RUBY_VER)
 
 RUBY30?=		"@comment "
 RUBY31?=		"@comment "
 RUBY32?=		"@comment "
 
 .      if defined(BROKEN_RUBY${RUBY_VER:R}${RUBY_VER:E})
 .        if ${BROKEN_RUBY${RUBY_VER:R}${RUBY_VER:E}} == "yes"
 BROKEN=			does not build with Ruby ${RUBY_VER}
 .        else
 BROKEN=			${BROKEN_RUBY${RUBY_VER:R}${RUBY_VER:E}}
 .        endif
 .      endif
 
 RUBY_WRKSRC=		${WRKDIR}/ruby-${RUBY_DISTVERSION}
 
 RUBY_CONFIGURE_ARGS+=	--with-rubyhdrdir="${PREFIX}/include/ruby-${RUBY_VER}/" \
 			--with-rubylibprefix="${PREFIX}/lib/ruby" \
 			--docdir="${RUBY_DOCDIR}" \
 			--with-soname=ruby${RUBY_SUFFIX}
 
 CONFIGURE_TARGET?=	${ARCH}-portbld-${OPSYS:tl}${OSREL:C/\..*//}
 
 RUBY_ARCH?=		${ARCH}-${OPSYS:tl}${OSREL:C/\..*//}
 
 _RUBY_SYSLIBDIR?=	${PREFIX}/lib
 _RUBY_SITEDIR?=		${_RUBY_SYSLIBDIR}/ruby/site_ruby
 _RUBY_VENDORDIR?=	${_RUBY_SYSLIBDIR}/ruby/vendor_ruby
 .    endif
 .  endif
 #      defined(RUBY)
 
 .  if !defined(_INVALID_RUBY_VER)
 
 RUBY_DEFAULT_SUFFIX?=	${RUBY_DEFAULT_VER:S/.//}
 
 RUBY_PORTVERSION?=	${RUBY_DISTVERSION:tl:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g}
 MASTER_SITE_SUBDIR_RUBY?=	${RUBY_VER}
 RUBY_DISTNAME?=		ruby-${RUBY_DISTVERSION}
 
 RUBY_WRKSRC?=		${WRKDIR}/${RUBY_DISTNAME}
 
 RUBY_RELVERSION_CODE?=	${RUBY_RELVERSION:S/.//g}
 RUBY_VERSION_CODE?=	${RUBY_VERSION:S/.//g}
 RUBY_VER=		${RUBY_VERSION:C/([[:digit:]]+\.[[:digit:]]+).*/\1/}
 RUBY_SUFFIX=		${RUBY_VER:S/.//}
 
 RUBY_WITHOUT_SUFFIX?=	${LOCALBASE}/bin/ruby
 RUBY_WITH_SUFFIX?=	${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}
 
 RUBY_PKGNAMEPREFIX?=	ruby${RUBY_SUFFIX}-
 RUBY_SHLIBVER?=		${RUBY_VER:S/.//}
 
 RUBY_CONFIGURE_ARGS+=	--program-prefix=""
 
 .    if ${RUBY_VER} != ${RUBY_DEFAULT_VER}
 DEPENDS_ARGS+=		RUBY_VER=${RUBY_VER}
 .    endif
 
 RUBY_CONFIGURE_ARGS+=	--program-suffix="${RUBY_SUFFIX}"
 
 RUBY_MODNAME?=		${PORTNAME}
 
 # Ports
 RUBY_BASE_PORT?=	lang/ruby${RUBY_VER:S/.//}
 RUBY_PORT?=		${RUBY_BASE_PORT}
 
 # Depends
 DEPEND_RUBY?=		${RUBY}:${RUBY_PORT}
 
 # Directories
 RUBY_LIBDIR?=		${_RUBY_SYSLIBDIR}/ruby/${RUBY_VER}
 RUBY_ARCHLIBDIR?=	${RUBY_LIBDIR}/${RUBY_ARCH}
 RUBY_SITELIBDIR?=	${_RUBY_SITEDIR}/${RUBY_VER}
 RUBY_SITEARCHLIBDIR?=	${RUBY_SITELIBDIR}/${RUBY_ARCH}
 RUBY_VENDORLIBDIR?=	${_RUBY_VENDORDIR}/${RUBY_VER}
 RUBY_VENDORARCHLIBDIR?=	${RUBY_VENDORLIBDIR}/${RUBY_ARCH}
 RUBY_DOCDIR?=		${PREFIX}/share/doc/ruby${RUBY_SUFFIX}
 RUBY_EXAMPLESDIR?=	${PREFIX}/share/examples/ruby${RUBY_SUFFIX}
 RUBY_RIDIR?=		${PREFIX}/share/ri/${RUBY_VER}/system
 RUBY_SITERIDIR?=	${PREFIX}/share/ri/${RUBY_VER}/site
 RUBY_MODDOCDIR?=	${RUBY_DOCDIR}/${RUBY_MODNAME}
 RUBY_MODEXAMPLESDIR?=	${RUBY_EXAMPLESDIR}/${RUBY_MODNAME}
 
 # PLIST
 PLIST_RUBY_DIRS=	RUBY_LIBDIR="${RUBY_LIBDIR}" \
 			RUBY_ARCHLIBDIR="${RUBY_ARCHLIBDIR}" \
 			RUBY_SITELIBDIR="${RUBY_SITELIBDIR}" \
 			RUBY_SITEARCHLIBDIR="${RUBY_SITEARCHLIBDIR}" \
 			RUBY_VENDORLIBDIR="${RUBY_VENDORLIBDIR}" \
 			RUBY_VENDORARCHLIBDIR="${RUBY_VENDORARCHLIBDIR}" \
 			RUBY_MODDOCDIR="${RUBY_MODDOCDIR}" \
 			RUBY_MODEXAMPLESDIR="${RUBY_MODEXAMPLESDIR}" \
 			RUBY_DOCDIR="${RUBY_DOCDIR}" \
 			RUBY_EXAMPLESDIR="${RUBY_EXAMPLESDIR}" \
 			RUBY_RIDIR="${RUBY_RIDIR}" \
 			RUBY_SITERIDIR="${RUBY_SITERIDIR}"
 
 PLIST_SUB+=		${PLIST_RUBY_DIRS:C,DIR="(${LOCALBASE}|${PREFIX})/,DIR=",} \
 			RUBY_VERSION="${RUBY_VERSION}" \
 			RUBY_VER="${RUBY_VER}" \
 			RUBY_SHLIBVER="${RUBY_SHLIBVER}" \
 			RUBY_ARCH="${RUBY_ARCH}" \
 			RUBY_SUFFIX="${RUBY_SUFFIX}" \
 			RUBY_DEFAULT_SUFFIX="${RUBY_DEFAULT_SUFFIX}"
 
 .    if ${PORT_OPTIONS:MDEBUG}
 RUBY_FLAGS+=	-d
 .    endif
 
 #
 # extconf.rb support
 #
 .    if ${ruby_ARGS:Mextconf}
 
 RUBY_EXTCONF?=		extconf.rb
 CONFIGURE_ARGS+=	--with-opt-dir="${LOCALBASE}"
 CONFIGURE_ENV+=		RB_USER_INSTALL=yes
 
 do-configure:	ruby-extconf-configure
 
 ruby-extconf-configure:
 .      if defined(RUBY_EXTCONF_SUBDIRS)
 .        for d in ${RUBY_EXTCONF_SUBDIRS}
 	@${ECHO_MSG} "===>  Running ${RUBY_EXTCONF} in ${d} to configure"
 	@cd ${CONFIGURE_WRKSRC}/${d}; \
 	${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
 .        endfor
 .      else
 	@${ECHO_MSG} "===>  Running ${RUBY_EXTCONF} to configure"
 	@cd ${CONFIGURE_WRKSRC}; \
 	${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
 .      endif
 .    endif
 
 #
 # setup.rb support
 #
 .    if ${ruby_ARGS:Msetup}
 RUBY_SETUP?=		setup.rb
 
 do-configure:	ruby-setup-configure
 
 ruby-setup-configure:
 	@${ECHO_MSG} "===>  Running ${RUBY_SETUP} to configure"
 	@cd ${BUILD_WRKSRC}; \
 	${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} config ${CONFIGURE_ARGS}
 
 do-build:	ruby-setup-build
 
 ruby-setup-build:
 	@${ECHO_MSG} "===>  Running ${RUBY_SETUP} to build"
 	@cd ${BUILD_WRKSRC}; \
 	${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} setup
 
 do-install:	ruby-setup-install
 
 ruby-setup-install:
 	@${ECHO_MSG} "===>  Running ${RUBY_SETUP} to install"
 	@cd ${INSTALL_WRKSRC}; \
 	${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} install --prefix=${STAGEDIR}
 .    endif
 
 .    if !${ruby_ARGS:Mbuild} && !${ruby_ARGS:Mrun} && !${ruby_ARGS:Mnone}
 EXTRACT_DEPENDS+=	${DEPEND_RUBY}
 PATCH_DEPENDS+=		${DEPEND_RUBY}
 BUILD_DEPENDS+=		${DEPEND_RUBY}
 RUN_DEPENDS+=		${DEPEND_RUBY}
 .    elif ${ruby_ARGS:Mbuild}
 EXTRACT_DEPENDS+=	${DEPEND_RUBY}
 PATCH_DEPENDS+=		${DEPEND_RUBY}
 BUILD_DEPENDS+=		${DEPEND_RUBY}
 .    elif ${ruby_ARGS:Mrun}
 RUN_DEPENDS+=		${DEPEND_RUBY}
 .    endif
 
 .  endif # _INVALID_RUBY_VER
 .endif
diff --git a/lang/ruby30/Makefile b/lang/ruby30/Makefile
index e3fc6cc8ab7d..7a6038bc3bb8 100644
--- a/lang/ruby30/Makefile
+++ b/lang/ruby30/Makefile
@@ -1,218 +1,218 @@
 PORTNAME=	ruby
 PORTVERSION=	${RUBY_PORTVERSION}
 PORTREVISION=	${RUBY_PORTREVISION}
 PORTEPOCH=	${RUBY_PORTEPOCH}
 CATEGORIES=	lang ruby
 MASTER_SITES=	RUBY/${MASTER_SITE_SUBDIR_RUBY}
 DISTNAME=	${RUBY_DISTNAME}
 DIST_SUBDIR=	ruby
 
 MAINTAINER=	ruby@FreeBSD.org
 COMMENT=	Object-oriented interpreted scripting language
 WWW=		https://www.ruby-lang.org/en/
 
 LICENSE=	BSD2CLAUSE RUBY
 LICENSE_COMB=	dual
 LICENSE_FILE_BSD2CLAUSE=${WRKSRC}/BSDL
 LICENSE_FILE_RUBY=	${WRKSRC}/COPYING
 
 DEPRECATED=	Please migrate to newer versions. Ruby 3.0 will reach its EoL on March 30, 2024
 EXPIRATION_DATE=2024-04-30
 
 # Using LIB_DEPENDS finds the libffi from gcc which causes problems
 BUILD_DEPENDS=	libffi>=0:devel/libffi
 LIB_DEPENDS=	libyaml.so:textproc/libyaml
 RUN_DEPENDS=	libffi>=0:devel/libffi
 
 USES=		autoreconf cpe ruby:none ssl tar:xz
 
 CONFIGURE_ARGS=	${RUBY_CONFIGURE_ARGS} \
 		--disable-rpath \
 		--enable-pthread \
 		--enable-shared \
 		--enable-install-static-library \
 		--with-ruby-version=minor \
 		--with-sitedir="${PREFIX}/lib/ruby/site_ruby" \
 		--with-vendordir="${PREFIX}/lib/ruby/vendor_ruby"
 CONFIGURE_ENV=	debugflags=
 CPPFLAGS+=	-I${LOCALBASE}/include
 GNU_CONFIGURE=	yes
 # Keep this, else ruby will fail to load libraries dependent of libpthread.
 LIBS+=		-lpthread -L${LOCALBASE}/lib
 USE_LDCONFIG=	yes
 WRKSRC=		${RUBY_WRKSRC}
 
 RUBY_VER=		3.0
 
 OPTIONS_DEFINE=		CAPIDOCS DEBUG DOCS EXAMPLES GMP RDOC
 OPTIONS_DEFAULT=	RDOC LIBEDIT
 OPTIONS_SINGLE=		EDIT
 OPTIONS_SINGLE_EDIT=	LIBEDIT READLINE
 OPTIONS_SUB=		yes
 CAPIDOCS_DESC=		Build and install C API documents
 GMP_DESC=		Use GMP to accelerate Bignum operations
 RDOC_DESC=		Build and install Rdoc indexes
 EDIT_DESC=		Which line editing lib to use
 LIBEDIT_DESC=		Use libedit
 READLINE_DESC=		Use libreadline
 CAPIDOCS_BUILD_DEPENDS=	doxygen>=1.8.13,2:devel/doxygen \
 			dot:graphics/graphviz
 CAPIDOCS_CONFIGURE_ENABLE=	install-capi
 GMP_CONFIGURE_WITH=	gmp
 GMP_LIB_DEPENDS=	libgmp.so:math/gmp
 LIBEDIT_CONFIGURE_ON=	--enable-libedit --with-libedit-dir=${LOCALBASE}
 LIBEDIT_USES=		libedit
 RDOC_CONFIGURE_ENABLE=	install-rdoc
 READLINE_CONFIGURE_ON=	--disable-libedit --with-readline-dir=${LOCALBASE}
 READLINE_USES=		readline
 
 CPE_VENDOR=	ruby-lang
 CPE_VERSION=	${RUBY_RELVERSION}
 CPE_UPDATE=	p${RUBY_PATCHLEVEL}
 
 .include <bsd.port.pre.mk>
 
 # PORTREVISION/PORTEPOCH hack
 
 .if ${PORTREVISION} != 0
 _SUF1=	_${PORTREVISION}
 .endif
 
 .if ${PORTEPOCH} != 0
 _SUF2=	,${PORTEPOCH}
 .endif
 
 #.if ${OPSYS} == "FreeBSD"
 #.if exists(/usr/sbin/dtrace) && (${ARCH} == amd64 || ${ARCH} == i386 || ${ARCH} == powerpc64le || ${ARCH} == powerpc64 || ${ARCH} == powerpc)
 #CONFIGURE_ARGS+=--enable-dtrace
 #.else
 #CONFIGURE_ARGS+=--disable-dtrace
 #.endif
 #.endif
 
 # keep in sync with all platforms where libunwind is available
-.if ${ARCH} == aarch64 || ${ARCH} == amd64 || ${ARCH} == armv7 || ${ARCH} == i386 || ${ARCH} == powerpc64 || ${ARCH} == powerpc64le
+.if ${ARCH} == aarch64 || ${ARCH} == amd64 || ${ARCH} == armv7 || ${ARCH} == i386 || ${ARCH} == powerpc || ${ARCH} == powerpc64 || ${ARCH} == powerpc64le
 LIB_DEPENDS+=	libunwind.so:devel/libunwind
 .endif
 
 .if defined(PPC_ABI) && ${PPC_ABI} == ELFv1
 USE_GCC=	yes
 .endif
 
 .if ${ARCH} == armv6 || ${ARCH} == armv7 || ${ARCH} == powerpc
 CONFIGURE_ARGS+=--with-setjmp-type=_setjmp
 CONFIGURE_ENV+=	ac_cv_func__setjmp=yes
 .endif
 
 .if ${RUBY_VER} == ${RUBY_DEFAULT_VER}
 PLIST_SUB+=	IF_DEFAULT=""
 .else
 PKGNAMESUFFIX=	${RUBY_SUFFIX}
 PLIST_SUB+=	IF_DEFAULT="@comment "
 .endif
 
 INSTALLED_SCRIPTS=	ruby
 INSTALLED_MANUALS=	ruby
 
 EXTSAMPLES=	bigdecimal/sample/*.rb
 
 EXTDOCS=	readline/README			\
 		ripper/README			\
 		stringio/README.md		\
 		syslog/syslog.txt
 
 # Macros to change variables in rbconfig.rb
 RB_SET_CONF_VAR=${SH} -c '${REINPLACE_CMD} -E -e "s,(CONFIG\[\"$$0\"\][[:space:]]*=[[:space:]]*)(\(?)(.*)(\)?),\1\2$$1\4," ${WRKSRC}/rbconfig.rb' --
 
 post-patch:
 # We get these from other ports
 .for d in bin/* ext/dbm ext/gdbm ext/win32* lib/bundler* libexec/bundler* man/bundle* man/erb.1 man/gemfile* man/irb.1 man/ri.1
 	@${RM} -r ${BUILD_WRKSRC}/${d}
 .endfor
 
 post-build:
 #
 # Hack to allow modules to be installed into separate PREFIX and/or under user
 # privileges
 #
 	@${RB_SET_CONF_VAR} "prefix" "ENV['PREFIX'] || \3"
 	@${RB_SET_CONF_VAR} "INSTALL" "'/usr/bin/install -c'"
 	@${RB_SET_CONF_VAR} "INSTALL_PROGRAM" "ENV['RB_USER_INSTALL'] ? '${INSTALL} ${COPY} ${STRIP} -m ${BINMODE}' : '${INSTALL_PROGRAM}'"
 	@${RB_SET_CONF_VAR} "INSTALL_SCRIPT" "ENV['RB_USER_INSTALL'] ? '${INSTALL} ${COPY} -m ${BINMODE}' : '${INSTALL_SCRIPT}'"
 	@${RB_SET_CONF_VAR} "INSTALL_DATA" "ENV['RB_USER_INSTALL'] ? '${INSTALL} ${COPY} -m ${SHAREMODE}' : '${INSTALL_DATA}'"
 
 post-build-CAPIDOCS-on:
 	@${FIND} ${WRKSRC}/doc -type d -empty -delete
 
 pre-install:
 	${MKDIR} ${STAGEDIR}${RUBY_SITEARCHLIBDIR}
 	${MKDIR} ${STAGEDIR}${RUBY_VENDORARCHLIBDIR}
 
 pre-install-DOCS-on:
 	${MKDIR} ${STAGEDIR}${RUBY_DOCDIR}
 
 pre-install-EXAMPLES-on:
 	${MKDIR} ${STAGEDIR}${RUBY_EXAMPLESDIR}
 
 pre-install-RDOC-on:
 	${MKDIR} ${STAGEDIR}${RUBY_RIDIR}
 	${MKDIR} ${STAGEDIR}${RUBY_SITERIDIR}
 
 post-install:
 .if ${RUBY_VER} == ${RUBY_DEFAULT_VER}
 #
 # Link just installed "ruby" to "ruby30", etc.
 #
 . for FILE in ${INSTALLED_SCRIPTS}
 	${LN} -fs ${FILE}${RUBY_SUFFIX} ${STAGEDIR}${PREFIX}/bin/${FILE}
 . endfor
 #
 # Link "ruby.1.gz" to "ruby30.1.gz", etc.
 #
 . for FILE in ${INSTALLED_MANUALS}
 	${LN} -fs ${FILE}${RUBY_SUFFIX}.1.gz ${STAGEDIR}${MANPREFIX}/man/man1/${FILE}.1.gz
 . endfor
 .endif
 
 post-install-CAPIDOCS-on:
 	${RM} ${WRKSRC}/doc/capi/.timestamp ${STAGEDIR}${PREFIX}/share/doc/ruby${RUBY_SUFFIX}/capi/.timestamp
 	cd ${STAGEDIR}${PREFIX} && ${FIND} share/doc/ruby${RUBY_SUFFIX}/capi/ -type f >> ${TMPPLIST}
 
 post-install-DEBUG-off:
 #
 # XXX: hack to strip ruby binary. Ruby uses its own install script that seems
 # bogus to hack.
 #
 .if defined(STRIP) && ${STRIP} == -s
 	${STRIP_CMD} ${STAGEDIR}${PREFIX}/bin/ruby${RUBY_SUFFIX}
 	${STRIP_CMD} ${STAGEDIR}${PREFIX}/lib/libruby${RUBY_SHLIBVER}.so.${RUBY_SHLIBVER}
 	${FIND} ${STAGEDIR}${RUBY_ARCHLIBDIR} -type f -name '*\.so' -exec ${STRIP_CMD} {} \;
 .endif
 
 post-install-DOCS-on:
 	# Create all dirs required (":u" isn't available in STABLE yet :-()
 	${MKDIR} ${EXTDOCS:C|^([^/]+)/.*|\1|:S|^|${STAGEDIR}${RUBY_DOCDIR}/|}
 .for FILE in ${EXTDOCS}
 	${INSTALL_DATA} ${WRKSRC}/ext/${FILE} \
 		${STAGEDIR}${RUBY_DOCDIR}/${FILE:C|^([^/]+)/.*|\1|}/
 .endfor
 	@(cd ${WRKSRC}/doc/ && ${COPYTREE_SHARE} \* ${STAGEDIR}${RUBY_DOCDIR}/)
 	${INSTALL_DATA} ${WRKSRC}/COPYING*	\
 			${WRKSRC}/ChangeLog	\
 			${WRKSRC}/LEGAL		\
 			${WRKSRC}/README*	\
 			${STAGEDIR}${RUBY_DOCDIR}/
 
 post-install-EXAMPLES-on:
 	# Create all dirs required (":u" isn't available in STABLE yet :-()
 	${MKDIR} ${EXTSAMPLES:C|^([^/]+)/.*|\1|:S|^|${STAGEDIR}${RUBY_EXAMPLESDIR}/|}
 .for FILE in ${EXTSAMPLES}
 	${INSTALL_DATA} ${WRKSRC}/ext/${FILE} \
 		${STAGEDIR}${RUBY_EXAMPLESDIR}/${FILE:C|^([^/]+)/.*|\1|}/
 .endfor
 	(cd ${WRKSRC}/sample/ && ${COPYTREE_SHARE} . ${STAGEDIR}${RUBY_EXAMPLESDIR}/)
 
 do-test:
 	cd ${WRKSRC} && ${MAKE_CMD} test
 
 .include <bsd.port.post.mk>