diff --git a/mail/sylpheed/Makefile b/mail/sylpheed/Makefile
index 3931d2c068a5..1f1b3f3da70d 100644
--- a/mail/sylpheed/Makefile
+++ b/mail/sylpheed/Makefile
@@ -1,103 +1,103 @@
 # New ports collection makefile for:	sylpheed
 # Date created:                 15 June 2000
 # Whom:                         shigeri <shigeri@m10.alpha-net.ne.jp>
 #
 # $FreeBSD$
 #
 
 PORTNAME=	sylpheed
-PORTVERSION=	0.8.0
+PORTVERSION=	0.8.1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	http://sylpheed.good-day.net/sylpheed/
 
 MAINTAINER=	lehmann@ans-netz.de
 
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 USE_X_PREFIX=	yes
 USE_GTK=	yes
 USE_LIBTOOL=	yes
 USE_REINPLACE=	yes
 
 CONFIGURE_ENV=	CPPFLAGS="-I${LOCALBASE}/include -I${X11BASE}/include" \
 		LIBS="-L${LOCALBASE}/lib -L${X11BASE}/lib"
 CONFIGURE_ARGS=	--enable-ipv6 --prefix=${PREFIX} --with-included-gettext
 
 .if defined(WITH_PIXBUF)
 LIB_DEPENDS+=	gdk_pixbuf.2:${PORTSDIR}/graphics/gdk-pixbuf
 CONFIGURE_ARGS+=--disable-imlib
 .else
 USE_IMLIB=	yes
 CONFIGURE_ARGS+=--disable-gdk-pixbuf
 .endif
 .if defined(WITH_GPGME)
 LIB_DEPENDS+=	gpgme.8:${PORTSDIR}/security/gpgme
 RUN_DEPENDS+=	gpg:${PORTSDIR}/security/gnupg
 CONFIGURE_ARGS+=--enable-gpgme
 .else
 CONFIGURE_ARGS+=--disable-gpgme
 .endif
 .if defined(WITH_COMPFACE)
 LIB_DEPENDS+=	compface.1:${PORTSDIR}/mail/faces
 CONFIGURE_ARGS+=--enable-compface
 .else
 CONFIGURE_ARGS+=--disable-compface
 .endif
 .if defined(WITH_JCONV)
 LIB_DEPENDS+=	jconv.0:${PORTSDIR}/japanese/libjconv
 CONFIGURE_ARGS+=--enable-jconv
 .else
 CONFIGURE_ARGS+=--disable-jconv
 .endif
 .if defined(WITH_JPILOT)
 LIB_DEPENDS+=	pisock.4:${PORTSDIR}/palm/pilot-link
 RUN_DEPENDS+=	jpilot:${PORTSDIR}/palm/jpilot
 CONFIGURE_ARGS+=--enable-jpilot
 .else
 CONFIGURE_ARGS+=	--disable-jpilot
 .endif
 .if defined(WITH_LDAP)
 LIB_DEPENDS+=	ldap.2:${PORTSDIR}/net/openldap2
 CONFIGURE_ARGS+=--enable-ldap
 .else
 CONFIGURE_ARGS+=--disable-ldap
 .endif
 .if !defined(WITHOUT_SSL)
 USE_OPENSSL=	yes
 CONFIGURE_ARGS+=--enable-ssl
 .else
 CONFIGURE_ARGS+=--disable-ssl
 .endif
 
 pre-everything::
 	@${ECHO} ""
 	@${ECHO} "You may use the following build options:"
 	@${ECHO} ""
 	@${ECHO} "      WITH_PIXBUF=yes   Enable GDK Pixbuf support"
 	@${ECHO} "      WITH_GPGME=yes    Enable GnuPG support using GPGME."
 	@${ECHO} "      WITH_COMPFACE=yes Enable X-Face support."
 	@${ECHO} "      WITH_JCONV=yes    Enable Japanese charset conversion"
 	@${ECHO} "                        library libjconv."
 	@${ECHO} "      WITH_JPILOT=yes   Enable JPilot support."
 	@${ECHO} "      WITH_LDAP=yes     Enable LDAP support."
 	@${ECHO} ""
 	@${ECHO} "      WITHOUT_SSL=yes   Disable OpenSSL support."
 	@${ECHO} ""
 
 post-patch:
 	@${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS:S/"//g}|g; \
 		s|-lresolv||g' ${WRKSRC}/configure
 
 pre-build:
 	${LN} -sf ${LOCALBASE}/bin/${LIBTOOL} ${WRKSRC}/libtool
 
 post-install:
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
 .for i in ChangeLog INSTALL README TODO
 	@${INSTALL_DATA} ${WRKSRC}/${i} ${DOCSDIR}
 	@${INSTALL_DATA} ${WRKSRC}/${i}.jp ${DOCSDIR}
 .endfor
 .endif
 
 .include <bsd.port.mk>
diff --git a/mail/sylpheed/distinfo b/mail/sylpheed/distinfo
index 90fd89cd7786..ac0b4dfdb9c5 100644
--- a/mail/sylpheed/distinfo
+++ b/mail/sylpheed/distinfo
@@ -1 +1 @@
-MD5 (sylpheed-0.8.0.tar.bz2) = 49c33d2097e339b188eeac561ae5c251
+MD5 (sylpheed-0.8.1.tar.bz2) = ed678ccf9a2eafd54445f4c77cd800a4
diff --git a/mail/sylpheed2-devel/Makefile b/mail/sylpheed2-devel/Makefile
index 3931d2c068a5..1f1b3f3da70d 100644
--- a/mail/sylpheed2-devel/Makefile
+++ b/mail/sylpheed2-devel/Makefile
@@ -1,103 +1,103 @@
 # New ports collection makefile for:	sylpheed
 # Date created:                 15 June 2000
 # Whom:                         shigeri <shigeri@m10.alpha-net.ne.jp>
 #
 # $FreeBSD$
 #
 
 PORTNAME=	sylpheed
-PORTVERSION=	0.8.0
+PORTVERSION=	0.8.1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	http://sylpheed.good-day.net/sylpheed/
 
 MAINTAINER=	lehmann@ans-netz.de
 
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 USE_X_PREFIX=	yes
 USE_GTK=	yes
 USE_LIBTOOL=	yes
 USE_REINPLACE=	yes
 
 CONFIGURE_ENV=	CPPFLAGS="-I${LOCALBASE}/include -I${X11BASE}/include" \
 		LIBS="-L${LOCALBASE}/lib -L${X11BASE}/lib"
 CONFIGURE_ARGS=	--enable-ipv6 --prefix=${PREFIX} --with-included-gettext
 
 .if defined(WITH_PIXBUF)
 LIB_DEPENDS+=	gdk_pixbuf.2:${PORTSDIR}/graphics/gdk-pixbuf
 CONFIGURE_ARGS+=--disable-imlib
 .else
 USE_IMLIB=	yes
 CONFIGURE_ARGS+=--disable-gdk-pixbuf
 .endif
 .if defined(WITH_GPGME)
 LIB_DEPENDS+=	gpgme.8:${PORTSDIR}/security/gpgme
 RUN_DEPENDS+=	gpg:${PORTSDIR}/security/gnupg
 CONFIGURE_ARGS+=--enable-gpgme
 .else
 CONFIGURE_ARGS+=--disable-gpgme
 .endif
 .if defined(WITH_COMPFACE)
 LIB_DEPENDS+=	compface.1:${PORTSDIR}/mail/faces
 CONFIGURE_ARGS+=--enable-compface
 .else
 CONFIGURE_ARGS+=--disable-compface
 .endif
 .if defined(WITH_JCONV)
 LIB_DEPENDS+=	jconv.0:${PORTSDIR}/japanese/libjconv
 CONFIGURE_ARGS+=--enable-jconv
 .else
 CONFIGURE_ARGS+=--disable-jconv
 .endif
 .if defined(WITH_JPILOT)
 LIB_DEPENDS+=	pisock.4:${PORTSDIR}/palm/pilot-link
 RUN_DEPENDS+=	jpilot:${PORTSDIR}/palm/jpilot
 CONFIGURE_ARGS+=--enable-jpilot
 .else
 CONFIGURE_ARGS+=	--disable-jpilot
 .endif
 .if defined(WITH_LDAP)
 LIB_DEPENDS+=	ldap.2:${PORTSDIR}/net/openldap2
 CONFIGURE_ARGS+=--enable-ldap
 .else
 CONFIGURE_ARGS+=--disable-ldap
 .endif
 .if !defined(WITHOUT_SSL)
 USE_OPENSSL=	yes
 CONFIGURE_ARGS+=--enable-ssl
 .else
 CONFIGURE_ARGS+=--disable-ssl
 .endif
 
 pre-everything::
 	@${ECHO} ""
 	@${ECHO} "You may use the following build options:"
 	@${ECHO} ""
 	@${ECHO} "      WITH_PIXBUF=yes   Enable GDK Pixbuf support"
 	@${ECHO} "      WITH_GPGME=yes    Enable GnuPG support using GPGME."
 	@${ECHO} "      WITH_COMPFACE=yes Enable X-Face support."
 	@${ECHO} "      WITH_JCONV=yes    Enable Japanese charset conversion"
 	@${ECHO} "                        library libjconv."
 	@${ECHO} "      WITH_JPILOT=yes   Enable JPilot support."
 	@${ECHO} "      WITH_LDAP=yes     Enable LDAP support."
 	@${ECHO} ""
 	@${ECHO} "      WITHOUT_SSL=yes   Disable OpenSSL support."
 	@${ECHO} ""
 
 post-patch:
 	@${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS:S/"//g}|g; \
 		s|-lresolv||g' ${WRKSRC}/configure
 
 pre-build:
 	${LN} -sf ${LOCALBASE}/bin/${LIBTOOL} ${WRKSRC}/libtool
 
 post-install:
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
 .for i in ChangeLog INSTALL README TODO
 	@${INSTALL_DATA} ${WRKSRC}/${i} ${DOCSDIR}
 	@${INSTALL_DATA} ${WRKSRC}/${i}.jp ${DOCSDIR}
 .endfor
 .endif
 
 .include <bsd.port.mk>
diff --git a/mail/sylpheed2-devel/distinfo b/mail/sylpheed2-devel/distinfo
index 90fd89cd7786..ac0b4dfdb9c5 100644
--- a/mail/sylpheed2-devel/distinfo
+++ b/mail/sylpheed2-devel/distinfo
@@ -1 +1 @@
-MD5 (sylpheed-0.8.0.tar.bz2) = 49c33d2097e339b188eeac561ae5c251
+MD5 (sylpheed-0.8.1.tar.bz2) = ed678ccf9a2eafd54445f4c77cd800a4
diff --git a/mail/sylpheed2/Makefile b/mail/sylpheed2/Makefile
index 3931d2c068a5..1f1b3f3da70d 100644
--- a/mail/sylpheed2/Makefile
+++ b/mail/sylpheed2/Makefile
@@ -1,103 +1,103 @@
 # New ports collection makefile for:	sylpheed
 # Date created:                 15 June 2000
 # Whom:                         shigeri <shigeri@m10.alpha-net.ne.jp>
 #
 # $FreeBSD$
 #
 
 PORTNAME=	sylpheed
-PORTVERSION=	0.8.0
+PORTVERSION=	0.8.1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	http://sylpheed.good-day.net/sylpheed/
 
 MAINTAINER=	lehmann@ans-netz.de
 
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 USE_X_PREFIX=	yes
 USE_GTK=	yes
 USE_LIBTOOL=	yes
 USE_REINPLACE=	yes
 
 CONFIGURE_ENV=	CPPFLAGS="-I${LOCALBASE}/include -I${X11BASE}/include" \
 		LIBS="-L${LOCALBASE}/lib -L${X11BASE}/lib"
 CONFIGURE_ARGS=	--enable-ipv6 --prefix=${PREFIX} --with-included-gettext
 
 .if defined(WITH_PIXBUF)
 LIB_DEPENDS+=	gdk_pixbuf.2:${PORTSDIR}/graphics/gdk-pixbuf
 CONFIGURE_ARGS+=--disable-imlib
 .else
 USE_IMLIB=	yes
 CONFIGURE_ARGS+=--disable-gdk-pixbuf
 .endif
 .if defined(WITH_GPGME)
 LIB_DEPENDS+=	gpgme.8:${PORTSDIR}/security/gpgme
 RUN_DEPENDS+=	gpg:${PORTSDIR}/security/gnupg
 CONFIGURE_ARGS+=--enable-gpgme
 .else
 CONFIGURE_ARGS+=--disable-gpgme
 .endif
 .if defined(WITH_COMPFACE)
 LIB_DEPENDS+=	compface.1:${PORTSDIR}/mail/faces
 CONFIGURE_ARGS+=--enable-compface
 .else
 CONFIGURE_ARGS+=--disable-compface
 .endif
 .if defined(WITH_JCONV)
 LIB_DEPENDS+=	jconv.0:${PORTSDIR}/japanese/libjconv
 CONFIGURE_ARGS+=--enable-jconv
 .else
 CONFIGURE_ARGS+=--disable-jconv
 .endif
 .if defined(WITH_JPILOT)
 LIB_DEPENDS+=	pisock.4:${PORTSDIR}/palm/pilot-link
 RUN_DEPENDS+=	jpilot:${PORTSDIR}/palm/jpilot
 CONFIGURE_ARGS+=--enable-jpilot
 .else
 CONFIGURE_ARGS+=	--disable-jpilot
 .endif
 .if defined(WITH_LDAP)
 LIB_DEPENDS+=	ldap.2:${PORTSDIR}/net/openldap2
 CONFIGURE_ARGS+=--enable-ldap
 .else
 CONFIGURE_ARGS+=--disable-ldap
 .endif
 .if !defined(WITHOUT_SSL)
 USE_OPENSSL=	yes
 CONFIGURE_ARGS+=--enable-ssl
 .else
 CONFIGURE_ARGS+=--disable-ssl
 .endif
 
 pre-everything::
 	@${ECHO} ""
 	@${ECHO} "You may use the following build options:"
 	@${ECHO} ""
 	@${ECHO} "      WITH_PIXBUF=yes   Enable GDK Pixbuf support"
 	@${ECHO} "      WITH_GPGME=yes    Enable GnuPG support using GPGME."
 	@${ECHO} "      WITH_COMPFACE=yes Enable X-Face support."
 	@${ECHO} "      WITH_JCONV=yes    Enable Japanese charset conversion"
 	@${ECHO} "                        library libjconv."
 	@${ECHO} "      WITH_JPILOT=yes   Enable JPilot support."
 	@${ECHO} "      WITH_LDAP=yes     Enable LDAP support."
 	@${ECHO} ""
 	@${ECHO} "      WITHOUT_SSL=yes   Disable OpenSSL support."
 	@${ECHO} ""
 
 post-patch:
 	@${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS:S/"//g}|g; \
 		s|-lresolv||g' ${WRKSRC}/configure
 
 pre-build:
 	${LN} -sf ${LOCALBASE}/bin/${LIBTOOL} ${WRKSRC}/libtool
 
 post-install:
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
 .for i in ChangeLog INSTALL README TODO
 	@${INSTALL_DATA} ${WRKSRC}/${i} ${DOCSDIR}
 	@${INSTALL_DATA} ${WRKSRC}/${i}.jp ${DOCSDIR}
 .endfor
 .endif
 
 .include <bsd.port.mk>
diff --git a/mail/sylpheed2/distinfo b/mail/sylpheed2/distinfo
index 90fd89cd7786..ac0b4dfdb9c5 100644
--- a/mail/sylpheed2/distinfo
+++ b/mail/sylpheed2/distinfo
@@ -1 +1 @@
-MD5 (sylpheed-0.8.0.tar.bz2) = 49c33d2097e339b188eeac561ae5c251
+MD5 (sylpheed-0.8.1.tar.bz2) = ed678ccf9a2eafd54445f4c77cd800a4
diff --git a/mail/sylpheed3/Makefile b/mail/sylpheed3/Makefile
index 3931d2c068a5..1f1b3f3da70d 100644
--- a/mail/sylpheed3/Makefile
+++ b/mail/sylpheed3/Makefile
@@ -1,103 +1,103 @@
 # New ports collection makefile for:	sylpheed
 # Date created:                 15 June 2000
 # Whom:                         shigeri <shigeri@m10.alpha-net.ne.jp>
 #
 # $FreeBSD$
 #
 
 PORTNAME=	sylpheed
-PORTVERSION=	0.8.0
+PORTVERSION=	0.8.1
 CATEGORIES=	mail ipv6
 MASTER_SITES=	http://sylpheed.good-day.net/sylpheed/
 
 MAINTAINER=	lehmann@ans-netz.de
 
 USE_BZIP2=	yes
 USE_GMAKE=	yes
 USE_X_PREFIX=	yes
 USE_GTK=	yes
 USE_LIBTOOL=	yes
 USE_REINPLACE=	yes
 
 CONFIGURE_ENV=	CPPFLAGS="-I${LOCALBASE}/include -I${X11BASE}/include" \
 		LIBS="-L${LOCALBASE}/lib -L${X11BASE}/lib"
 CONFIGURE_ARGS=	--enable-ipv6 --prefix=${PREFIX} --with-included-gettext
 
 .if defined(WITH_PIXBUF)
 LIB_DEPENDS+=	gdk_pixbuf.2:${PORTSDIR}/graphics/gdk-pixbuf
 CONFIGURE_ARGS+=--disable-imlib
 .else
 USE_IMLIB=	yes
 CONFIGURE_ARGS+=--disable-gdk-pixbuf
 .endif
 .if defined(WITH_GPGME)
 LIB_DEPENDS+=	gpgme.8:${PORTSDIR}/security/gpgme
 RUN_DEPENDS+=	gpg:${PORTSDIR}/security/gnupg
 CONFIGURE_ARGS+=--enable-gpgme
 .else
 CONFIGURE_ARGS+=--disable-gpgme
 .endif
 .if defined(WITH_COMPFACE)
 LIB_DEPENDS+=	compface.1:${PORTSDIR}/mail/faces
 CONFIGURE_ARGS+=--enable-compface
 .else
 CONFIGURE_ARGS+=--disable-compface
 .endif
 .if defined(WITH_JCONV)
 LIB_DEPENDS+=	jconv.0:${PORTSDIR}/japanese/libjconv
 CONFIGURE_ARGS+=--enable-jconv
 .else
 CONFIGURE_ARGS+=--disable-jconv
 .endif
 .if defined(WITH_JPILOT)
 LIB_DEPENDS+=	pisock.4:${PORTSDIR}/palm/pilot-link
 RUN_DEPENDS+=	jpilot:${PORTSDIR}/palm/jpilot
 CONFIGURE_ARGS+=--enable-jpilot
 .else
 CONFIGURE_ARGS+=	--disable-jpilot
 .endif
 .if defined(WITH_LDAP)
 LIB_DEPENDS+=	ldap.2:${PORTSDIR}/net/openldap2
 CONFIGURE_ARGS+=--enable-ldap
 .else
 CONFIGURE_ARGS+=--disable-ldap
 .endif
 .if !defined(WITHOUT_SSL)
 USE_OPENSSL=	yes
 CONFIGURE_ARGS+=--enable-ssl
 .else
 CONFIGURE_ARGS+=--disable-ssl
 .endif
 
 pre-everything::
 	@${ECHO} ""
 	@${ECHO} "You may use the following build options:"
 	@${ECHO} ""
 	@${ECHO} "      WITH_PIXBUF=yes   Enable GDK Pixbuf support"
 	@${ECHO} "      WITH_GPGME=yes    Enable GnuPG support using GPGME."
 	@${ECHO} "      WITH_COMPFACE=yes Enable X-Face support."
 	@${ECHO} "      WITH_JCONV=yes    Enable Japanese charset conversion"
 	@${ECHO} "                        library libjconv."
 	@${ECHO} "      WITH_JPILOT=yes   Enable JPilot support."
 	@${ECHO} "      WITH_LDAP=yes     Enable LDAP support."
 	@${ECHO} ""
 	@${ECHO} "      WITHOUT_SSL=yes   Disable OpenSSL support."
 	@${ECHO} ""
 
 post-patch:
 	@${REINPLACE_CMD} -e 's|-lpthread|${PTHREAD_LIBS:S/"//g}|g; \
 		s|-lresolv||g' ${WRKSRC}/configure
 
 pre-build:
 	${LN} -sf ${LOCALBASE}/bin/${LIBTOOL} ${WRKSRC}/libtool
 
 post-install:
 .if !defined(NOPORTDOCS)
 	@${MKDIR} ${DOCSDIR}
 .for i in ChangeLog INSTALL README TODO
 	@${INSTALL_DATA} ${WRKSRC}/${i} ${DOCSDIR}
 	@${INSTALL_DATA} ${WRKSRC}/${i}.jp ${DOCSDIR}
 .endfor
 .endif
 
 .include <bsd.port.mk>
diff --git a/mail/sylpheed3/distinfo b/mail/sylpheed3/distinfo
index 90fd89cd7786..ac0b4dfdb9c5 100644
--- a/mail/sylpheed3/distinfo
+++ b/mail/sylpheed3/distinfo
@@ -1 +1 @@
-MD5 (sylpheed-0.8.0.tar.bz2) = 49c33d2097e339b188eeac561ae5c251
+MD5 (sylpheed-0.8.1.tar.bz2) = ed678ccf9a2eafd54445f4c77cd800a4