diff --git a/net/realtek-re-kmod/Makefile b/net/realtek-re-kmod/Makefile
index d09073b21701..2c0c88b8be27 100644
--- a/net/realtek-re-kmod/Makefile
+++ b/net/realtek-re-kmod/Makefile
@@ -1,24 +1,23 @@
 PORTNAME=	re
-PORTVERSION=	198.00
+PORTVERSION=	199.00
 DISTVERSIONPREFIX=	v
-PORTREVISION=	3
 CATEGORIES=	net
 PKGNAMEPREFIX=	realtek-
 PKGNAMESUFFIX=	-kmod
 
 MAINTAINER=	ale@FreeBSD.org
 COMMENT=	Kernel driver for Realtek PCIe Ethernet Controllers
 WWW=		https://github.com/alexdupre/rtl_bsd_drv
 
 LICENSE=	BSD4CLAUSE
 
 USES=		kmod tar:tgz uidfix
 
 USE_GITHUB=	yes
 GH_ACCOUNT=	alexdupre
 GH_PROJECT=	rtl_bsd_drv
-GH_TAGNAME=	d3a7a3d
+GH_TAGNAME=	9d48464
 
 PLIST_FILES=	${KMODDIR}/if_re.ko
 
 .include <bsd.port.mk>
diff --git a/net/realtek-re-kmod/distinfo b/net/realtek-re-kmod/distinfo
index fffba63c3ca5..0444cec6d82d 100644
--- a/net/realtek-re-kmod/distinfo
+++ b/net/realtek-re-kmod/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1689608993
-SHA256 (alexdupre-rtl_bsd_drv-v198.00-d3a7a3d_GH0.tar.gz) = 43ff94e41a4c674143f9a37299c40b92fd7f94a25fa33cf253114eda0f9f49fa
-SIZE (alexdupre-rtl_bsd_drv-v198.00-d3a7a3d_GH0.tar.gz) = 132723
+TIMESTAMP = 1702987653
+SHA256 (alexdupre-rtl_bsd_drv-v199.00-9d48464_GH0.tar.gz) = 6b4be7f5e17097f430dbeb3a366e51affdaad066221b9352bf32cbcb4ebc504f
+SIZE (alexdupre-rtl_bsd_drv-v199.00-9d48464_GH0.tar.gz) = 162364
diff --git a/net/realtek-re-kmod/pkg-message b/net/realtek-re-kmod/pkg-message
index 223da6049f14..04c8a05a9b71 100644
--- a/net/realtek-re-kmod/pkg-message
+++ b/net/realtek-re-kmod/pkg-message
@@ -1,22 +1,28 @@
 [
 { type: install
   message: <<EOM
 Add the following lines to your /boot/loader.conf
 to override the built-in FreeBSD re(4) driver.
 
 if_re_load="YES"
 if_re_name="/boot/modules/if_re.ko"
 
 By default, the size of allocated mbufs is enough
 to receive the largest Ethernet frame supported
 by the card.  If your memory is highly fragmented,
 trying to allocate contiguous pages (more than
 4096 bytes) may result in driver hangs.
 For this reason the value is tunable at boot time,
 e.g. if you don't need Jumbo frames you can lower
 the memory requirements and avoid this issue with:
 
 hw.re.max_rx_mbuf_sz="2048"
+
+To enable Wake on LAN (WoL) support you might need
+to set the following tunables:
+
+hw.re.s5wol="1"
+hw.re.s0_magic_packet="1"
 EOM
 }
 ]