diff --git a/sysutils/u-boot-starfive-visionfive2/Makefile b/sysutils/u-boot-starfive-visionfive2/Makefile
index 101a17f18a02..73ce621a2a2b 100644
--- a/sysutils/u-boot-starfive-visionfive2/Makefile
+++ b/sysutils/u-boot-starfive-visionfive2/Makefile
@@ -1,16 +1,18 @@
 MASTERDIR=	${.CURDIR}/../u-boot-master
 
+U_BOOT_SLAVE_PORTREVISION_2024.01=	1
+
 MODEL=		starfive-visionfive2
 BOARD_CONFIG=	starfive_visionfive2_defconfig
 FAMILY=		starfive
 UBOOT_ARCH=	riscv64
 
 # The FIT image will embed an OpenSBI firmware binary
 OPENSBI_FIRM=	${LOCALBASE}/share/opensbi/lp64/generic/firmware/fw_dynamic.bin
 BUILD_DEPENDS+=	${OPENSBI_FIRM}:sysutils/opensbi
 MAKE_ENV+=	OPENSBI=${OPENSBI_FIRM}
 
 UBOOT_MOVE=	${WRKSRC}/spl/u-boot-spl.bin.normal.out
 UBOOT_PLIST=	u-boot.itb u-boot-spl.bin.normal.out
 
 .include "${MASTERDIR}/Makefile"
diff --git a/sysutils/u-boot-starfive-visionfive2/pkg-descr b/sysutils/u-boot-starfive-visionfive2/pkg-descr
index a3fc9635157c..a8ff1c374ff2 100644
--- a/sysutils/u-boot-starfive-visionfive2/pkg-descr
+++ b/sysutils/u-boot-starfive-visionfive2/pkg-descr
@@ -1,15 +1,15 @@
 U-Boot loader and related files for the StarFive VisionFive v2 (JH7110).
 
 The SD card must be formatted with a GPT partition scheme, and expects two
 specific GUID partition types for the SPL and FIT image.
 
 Assuming an SD card device in /dev/da2, execute:
 # gpart create -s gpt da2
-# gpart add -l spl -t !2E54B353-1271-4842-806F-E436D6AF6985 -b 2m -s 2m da2
-# gpart add -l uboot -t !BC13C2FF-59E6-4262-A352-B275FD6F7172 -b 4m -s 4m da2
+# gpart add -l spl -t \!2E54B353-1271-4842-806F-E436D6AF6985 -b 2m -s 2m da2
+# gpart add -l uboot -t \!BC13C2FF-59E6-4262-A352-B275FD6F7172 -b 4m -s 4m da2
 
 Now, copy the u-boot files to the SD card with dd(1).
 dd if=/usr/local/share/u-boot/u-boot-starfive-visionfive2/u-boot-spl.bin.normal.out \
     of=/dev/da2p1 conv=sync
 dd if=/usr/local/share/u-boot/u-boot-starfive-visionfive2/u-boot.itb \
     of=/dev/da2p2 conv=sync