diff --git a/Mk/Uses/nodejs.mk b/Mk/Uses/nodejs.mk
index af38aba78e55..23aad97fa580 100644
--- a/Mk/Uses/nodejs.mk
+++ b/Mk/Uses/nodejs.mk
@@ -1,60 +1,58 @@
 # Provide support for NodeJS
 #
 # Feature:      nodejs
 # Usage:        USES=nodejs or USES=nodejs:args
 # Valid ARGS:	build and/or run <version>
-# version:      lts, current, 10, 14, 16, 17
+# version:      lts, current, 14, 16, 17
 # Default is:   build,run
 # Note:			if you define a version, you must provide run and/or build
 #
 # MAINTAINER: bhughes@FreeBSD.org
 
 .if !defined(_INCLUDE_USES_NODEJS_MK)
 _INCLUDE_USES_NODEJS_MK=	yes
 
-_VALID_NODEJS_VERSION=	10 14 16 17 lts current
+_VALID_NODEJS_VERSION=	14 16 17 lts current
 _NODEJS_VERSION_SUFFIX=	${NODEJS_DEFAULT}
 
 .if ! ${_VALID_NODEJS_VERSION:M${_NODEJS_VERSION_SUFFIX}}
 IGNORE=	Invalid nodejs default version ${_NODEJS_VERSION_SUFFIX}; valid versions are ${_VALID_NODEJS_VERSION}
 .endif
 
 .if empty(nodejs_ARGS)
 nodejs_ARGS=	build,run
 .endif
 
-. if ${nodejs_ARGS:M10}
-_NODEJS_VERSION_SUFFIX=	10
-. elif ${nodejs_ARGS:M14}
+. if ${nodejs_ARGS:M14}
 _NODEJS_VERSION_SUFFIX=	14
 . elif ${nodejs_ARGS:M16}
 _NODEJS_VERSION_SUFFIX=	16
 . elif ${nodejs_ARGS:Mlts}
 _NODEJS_VERSION_SUFFIX=	lts
 . elif ${nodejs_ARGS:M17}
 _NODEJS_VERSION_SUFFIX=	17
 . elif ${nodejs_ARGS:Mcurrent}
 _NODEJS_VERSION_SUFFIX=	current
 . elif defined(NODEJS_DEFAULT)
 . endif
 
 # The nodejs 17 version is named www/node
 . if ${_NODEJS_VERSION_SUFFIX:Mcurrent}
 _NODEJS_VERSION_SUFFIX=
 . endif
 . if ${_NODEJS_VERSION_SUFFIX:M17}
 _NODEJS_VERSION_SUFFIX=
 . endif
 # The nodejs LTS is version 16
 . if ${_NODEJS_VERSION_SUFFIX:Mlts}
 _NODEJS_VERSION_SUFFIX=	16
 . endif
 
 . if ${nodejs_ARGS:M*run*}
 RUN_DEPENDS+=	node:www/node${_NODEJS_VERSION_SUFFIX}
 . endif
 . if ${nodejs_ARGS:M*build*}
 BUILD_DEPENDS+=	node:www/node${_NODEJS_VERSION_SUFFIX}
 . endif
 
 .endif
diff --git a/Mk/bsd.default-versions.mk b/Mk/bsd.default-versions.mk
index c4a56a4337ac..1f991e608c70 100644
--- a/Mk/bsd.default-versions.mk
+++ b/Mk/bsd.default-versions.mk
@@ -1,169 +1,169 @@
 # MAINTAINER:	ports@FreeBSD.org
 #
 # Note: before committing to this file, contact portmgr to arrange for an
 # experimental ports run.  Untested commits may be backed out at portmgr's
 # discretion.
 #
 # Provide default versions for ports with multiple versions selectable
 # by the user.
 #
 # Users who want to override these defaults can easily do so by defining
 # DEFAULT_VERSIONS in their make.conf as follows:
 #
 #   DEFAULT_VERSIONS=	perl5=5.20 ruby=2.7
 
 .if !defined(_INCLUDE_BSD_DEFAULT_VERSIONS_MK)
 _INCLUDE_BSD_DEFAULT_VERSIONS_MK=	yes
 
 LOCALBASE?=	/usr/local
 
 .for lang in APACHE BDB COROSYNC EMACS FIREBIRD FORTRAN FPC GCC GHOSTSCRIPT GL \
 	IMAGEMAGICK JAVA LAZARUS LIBRSVG2 LINUX LLVM LUA MYSQL NINJA NODEJS PERL5 \
 	PGSQL PHP PYTHON PYTHON2 PYTHON3 RUBY RUST SAMBA SSL TCLTK VARNISH
 .if defined(${lang}_DEFAULT)
 ERROR+=	"The variable ${lang}_DEFAULT is set and it should only be defined through DEFAULT_VERSIONS+=${lang:tl}=${${lang}_DEFAULT} in /etc/make.conf"
 .endif
 #.undef ${lang}_DEFAULT
 .endfor
 
 .for lang in ${DEFAULT_VERSIONS}
 _l=		${lang:C/=.*//g}
 ${_l:tu}_DEFAULT=	${lang:C/.*=//g}
 .endfor
 
 # Possible values: 2.4
 APACHE_DEFAULT?=	2.4
 # Possible values: 5, 18
 BDB_DEFAULT?=		5
 # Possible values: 2, 3
 COROSYNC_DEFAULT?=	2
 # Possible_values: full canna nox devel_full devel_nox
 #EMACS_DEFAULT?=	let the flavor be the default if not explicitly set
 # Possible values: 2.5, 3.0, 4.0
 FIREBIRD_DEFAULT?=	2.5
 # Possible values: flang (experimental), gfortran
 FORTRAN_DEFAULT?=	gfortran
 # Possible values: 3.2.2
 FPC_DEFAULT?=		3.2.2
 # Possible values: 8 (last to support powerpcspe), 9, 10, 11
 # (Any other version is completely unsupported and not meant for general use.)
 .if ${ARCH} == "powerpcspe"
 GCC_DEFAULT?=		8
 .else
 GCC_DEFAULT?=		10
 .endif
 # Possible values: mesa-libs, mesa-devel
 GL_DEFAULT?=		mesa-libs
 # Possible values: 7, 8, 9, agpl
 GHOSTSCRIPT_DEFAULT?=	agpl
 # Possible values: 6, 6-nox11, 7, 7-nox11
 IMAGEMAGICK_DEFAULT?=	7
 # Possible values: 7, 8, 11, 12, 13, 14, 15, 16
 JAVA_DEFAULT?=		8
 # Possible values: 2.2.0, 2.3.0
 .if !defined(WANT_LAZARUS_DEVEL)
 LAZARUS_DEFAULT?=       2.2.0
 .else
 LAZARUS_DEFAULT?=       2.3.0
 .endif
 # Possible values: rust, legacy
 .if empty(ARCH:Naarch64:Narmv6:Narmv7:Namd64:Ni386:Npowerpc64:Npowerpc64le:Npowerpc)
 LIBRSVG2_DEFAULT?=	rust
 .else
 LIBRSVG2_DEFAULT?=	legacy
 .endif
 # Possible values: c7
 LINUX_DEFAULT?=		c7
 # Possible values: 70, 80, 90, 10, 11, 12, 13, -devel (to be used when non-base compiler is required)
 # Please give notice to the Graphics Team (x11@FreeBSD.org) in advance before
 # bumping the LLVM version.
 .if ${ARCH} == powerpc
 LLVM_DEFAULT?=		10
 .else
 LLVM_DEFAULT?=		90
 .endif
 # Possible values: 5.1, 5.2, 5.3, 5.4
 LUA_DEFAULT?=		5.2
 # Possible values: 5.10, 5.20, 6.8
 MONO_DEFAULT=		5.10
 # Possible values: 5.5, 5.6, 5.7, 8.0, 10.3m, 10.4m, 10.5m, 5.5p, 5.6p, 5.7p, 5.6w, 5.7w
 MYSQL_DEFAULT?=		5.7
 # Possible values: ninja, samurai
 NINJA_DEFAULT?=		ninja
 # Possible values: 5.30, 5.32, 5.34, devel
 .if !exists(${LOCALBASE}/bin/perl) || (!defined(_PORTS_ENV_CHECK) && \
     defined(PACKAGE_BUILDING))
 PERL5_DEFAULT?=		5.32
 .elif !defined(PERL5_DEFAULT)
 # There's no need to replace development versions, like "5.23" with "devel"
 # because 1) nobody is supposed to use it outside of poudriere, and 2) it must
 # be set manually in /etc/make.conf in the first place, and we're never getting
 # in here.
 .if !defined(_PERL5_FROM_BIN)
 _PERL5_FROM_BIN!=	${LOCALBASE}/bin/perl -e 'printf "%vd\n", $$^V;'
 .endif
 _EXPORTED_VARS+=	_PERL5_FROM_BIN
 PERL5_DEFAULT:=		${_PERL5_FROM_BIN:R}
 .endif
 # Possible values: 10, 11, 12, 13, 14
 PGSQL_DEFAULT?=		13
 # Possible values: 7.4, 8.0, 8.1
 PHP_DEFAULT?=		8.0
 # Possible values: 2.7, 3.7, 3.8, 3.9, 3.10, 3.11
 PYTHON_DEFAULT?=	3.8
 # Possible values: 2.7
 PYTHON2_DEFAULT?=	2.7
 # Possible values: 3.7, 3.8, 3.9, 3.10, 3.11
 PYTHON3_DEFAULT?=	3.8
-# Possible values: 2.6, 2.7, 3.0, 3.1
+# Possible values: 2.7, 3.0, 3.1
 RUBY_DEFAULT?=		2.7
 # Possible values: rust, rust-nightly
 RUST_DEFAULT?=		rust
 # Possible values: 4.12, 4.13
 SAMBA_DEFAULT?=		4.12
 # Possible values: base, openssl, libressl, libressl-devel
 .if !defined(SSL_DEFAULT)
 #	If no preference was set, check for an installed base version
 #	but give an installed port preference over it.
 .  if	!defined(SSL_DEFAULT) && \
 	!exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so) && \
 	exists(${DESTDIR}/usr/include/openssl/opensslv.h)
 SSL_DEFAULT=	base
 .  else
 .    if exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so)
 .      if defined(PKG_BIN)
 # find installed port and use it for dependency
 .        if !defined(OPENSSL_INSTALLED)
 .          if defined(DESTDIR)
 PKGARGS=	-c ${DESTDIR}
 .          else
 PKGARGS=
 .          endif
 OPENSSL_INSTALLED!=	${PKG_BIN} ${PKGARGS} which -qo ${LOCALBASE}/lib/libcrypto.so || :
 .        endif
 .        if defined(OPENSSL_INSTALLED) && !empty(OPENSSL_INSTALLED)
 SSL_DEFAULT:=		${OPENSSL_INSTALLED:T}
 WARNING+=	"You have ${OPENSSL_INSTALLED} installed but do not have DEFAULT_VERSIONS+=ssl=${SSL_DEFAULT} set in your make.conf"
 .        endif
 .      else
 check-makevars::
 	@${ECHO_MSG} "You have a ${LOCALBASE}/lib/libcrypto.so file installed, but the framework is unable"
 	@${ECHO_MSG} "to determine what port it comes from."
 	@${ECHO_MSG} "Add DEFAULT_VERSIONS+=ssl=<openssl package name> to your /etc/make.conf and try again."
 	@${FALSE}
 .      endif
 .    endif
 .  endif
 # Make sure we have a default in the end
 SSL_DEFAULT?=	base
 .endif
 # Possible values: 8.5, 8.6, 8.7
 TCLTK_DEFAULT?=		8.6
 
 # Possible values: 4, 6
 VARNISH_DEFAULT?=	4
 
-# Possible value: 10, 14, 16, 17, lts, current
+# Possible value: 14, 16, 17, lts, current
 NODEJS_DEFAULT?=    lts
 
 .endif
diff --git a/Mk/bsd.ruby.mk b/Mk/bsd.ruby.mk
index 83bb14174b2a..82bff4d01783 100644
--- a/Mk/bsd.ruby.mk
+++ b/Mk/bsd.ruby.mk
@@ -1,369 +1,358 @@
 # bsd.ruby.mk - Utility definitions for Ruby related ports.
 #
 # Created by: Akinori MUSHA <knu@FreeBSD.org>
 
 .if !defined(Ruby_Include)
 
 Ruby_Include=			bsd.ruby.mk
 Ruby_Include_MAINTAINER=	ruby@FreeBSD.org
 
 #
 # [variables that a user may define]
 #
 # RUBY_VER		- (See below)
 # RUBY_DEFAULT_VER	- Set to (e.g.) "2.7" if you want to refer to "ruby27"
 #			  just as "ruby".
 # RUBY_ARCH		- (See below)
 #
 # [variables that each port can define]
 #
 # RUBY			- Set to full path of ruby.  If you set this, the values
 #			  of the following variables are automatically obtained
 #			  from the ruby executable: RUBY_VER, RUBY_VERSION,
 #			  RUBY_ARCH, RUBY_LIBDIR, RUBY_ARCHLIBDIR,
 #			  RUBY_SITELIBDIR, and RUBY_SITEARCHLIBDIR.
 # RUBY_VER		- Set to the alternative short version of ruby in the
 #			  form of `x.y' (see below for current value).
 # USE_RUBY		- Says that the port uses ruby for building and running.
 # RUBY_NO_BUILD_DEPENDS	- Says that the port should not build-depend on ruby.
 # RUBY_NO_RUN_DEPENDS	- Says that the port should not run-depend on ruby.
 # USE_RUBY_EXTCONF	- Says that the port uses extconf.rb to configure.
 #			  Implies USE_RUBY.
 # RUBY_EXTCONF		- Set to the alternative name of extconf.rb
 #			  (default: extconf.rb).
 # RUBY_EXTCONF_SUBDIRS	- Set to list of subdirectories, if multiple modules
 #			  are included.
 # USE_RUBY_SETUP	- Says that the port uses setup.rb to configure and
 #			  build.
 # RUBY_SETUP		- Set to the alternative name of setup.rb
 #			  (default: setup.rb).
 # USE_RUBYGEMS		- Do not use this -- instead USES=gem
 #
 # [variables that each port should not (re)define]
 #
 # RUBY_PKGNAMEPREFIX	- Common PKGNAMEPREFIX for ruby ports
 #			  (default: ruby${RUBY_SUFFIX}-)
 # RUBY_VERSION		- Full version of ruby without preview/beta suffix in
 #			  the form of `x.y.z' (see below for current value).
 # RUBY_VERSION_CODE	- Integer version of RUBY_VERSION in the form of 
 #			  `xyz'.
 # RUBY_DISTVERSION	- DISTVERSION for the standard ruby ports (ruby,
 #			  ruby-gdbm, etc.).
 # RUBY_PORTVERSION	- PORTVERSION for the standard ruby ports (ruby,
 #			  ruby-gdbm, etc.).
 # RUBY_PORTREVISION	- PORTREVISION for the standard ruby ports.
 # RUBY_PORTEPOCH	- PORTEPOCH for the standard ruby ports.
 # RUBY_DISTNAME		- DISTNAME for the standard ruby ports, i.e. the
 #			  basename of the ruby distribution tarball.
 # RUBY_PATCHFILES	- PATCHFILES for the standard ruby ports, i.e. the
 #			  basename of the ruby distribution tarball.
 # RUBY_WRKSRC		- WRKSRC for the ruby port.
 # MASTER_SITE_SUBDIR_RUBY	- MASTER_SITE_SUBDIR for the ruby distfiles.
 #
 # RUBY_SHLIBVER		- Major version of libruby (see below for current
 #			  value).
 # RUBY_ARCH		- Set to target architecture name.
 #			  (e.g. i386-freebsd7)
 # RUBY_SUFFIX		- Suffix for ruby binaries and directories
 #			  (${RUBY_VER:S/.//}).
 # RUBY_WITHOUT_SUFFIX	- Always ${LOCALBASE}/bin/ruby.
 # RUBY_WITH_SUFFIX	- Always ${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}.
 #
 # RUBY_MODNAME		- Set to the module name (default: ${PORTNAME}).
 #
 # RUBY_RDOC		- Full path of rdoc executable.
 #
 # RUBY_BASE_PORT	- Port path of base ruby without PORTSDIR, without
 #			  suffix except version.
 # RUBY_PORT		- Port path of ruby without PORTSDIR.
 #
 # DEPEND_RUBY		- BUILD_DEPENDS/RUN_DEPENDS entry for ruby.
 #
 # RUBY_LIBDIR		- Installation path for architecture independent
 #			  libraries.
 # RUBY_ARCHLIBDIR	- Installation path for architecture dependent
 #			  libraries.
 # RUBY_SITELIBDIR	- Installation path for site architecture independent
 #			  libraries.
 # RUBY_SITEARCHLIBDIR	- Installation path for site architecture dependent
 #			  libraries.
 # RUBY_DOCDIR		- Installation path for documents.
 # RUBY_EXAMPLESDIR	- Installation path for examples.
 # RUBY_RIDIR		- Installation path for site architecture independent ri
 #			  documents.
 # RUBY_SITERIDIR	- Installation path for site architecture dependent ri
 #			  documents.
 # RUBY_MODDOCDIR	- Installation path for the module's documents.
 # RUBY_MODEXAMPLESDIR	- Installation path for the module's examples.
 #
 
 .if defined(RUBY_DEFAULT_VER)
 WARNING+=	"RUBY_DEFAULT_VER is defined, consider using DEFAULT_VERSIONS=ruby=${RUBY_DEFAULT_VER} instead"
 .endif
 
 RUBY_DEFAULT_VER?=	${RUBY_DEFAULT}
 
 RUBY_VER?=		${RUBY_DEFAULT_VER}
 
 .if defined(RUBY)
 .if !exists(${RUBY})
 IGNORE=	cannot install: you set the variable RUBY to "${RUBY}", but it does not seem to exist.  Please specify an already installed ruby executable
 .endif
 
 _RUBY_TEST!=		${RUBY} -e 'begin; require "rbconfig"; puts "ok" ; rescue LoadError; puts "error"; end'
 .if !empty(_RUBY_TEST) && ${_RUBY_TEST} != "ok"
 IGNORE=	cannot install: you set the variable RUBY to "${RUBY}", but it failed to include rbconfig.  Please specify a properly installed ruby executable
 .endif
 
 _RUBY_CONFIG=		${RUBY} -r rbconfig -e 'C = RbConfig::CONFIG' -e
 
 RUBY_VERSION!=		${_RUBY_CONFIG} 'puts C["ruby_version"]'
 RUBY_SUFFIX?=		# empty
 
 RUBY_ARCH!=		${_RUBY_CONFIG} 'puts C["target"]'
 
 _RUBY_SYSLIBDIR!=	${_RUBY_CONFIG} 'puts C["libdir"]'
 _RUBY_SITEDIR!=		${_RUBY_CONFIG} 'puts C["sitedir"]'
 _RUBY_VENDORDIR!=	${_RUBY_CONFIG} 'puts C["vendordir"]'
 .else
 RUBY?=			${LOCALBASE}/bin/ruby${RUBY_SUFFIX}
 
 .if defined(RUBY_VER)
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
-. if ${RUBY_VER} == 2.6
-#
-# Ruby 2.6
-#
-RUBY_DISTVERSION=	2.6.9
-RUBY_PORTREVISION=	1
-RUBY_PORTEPOCH=		1
-RUBY26=			""	# PLIST_SUB helpers
-
-. elif ${RUBY_VER} == 2.7
+. if ${RUBY_VER} == 2.7
 #
 # Ruby 2.7
 #
 RUBY_DISTVERSION=	2.7.5
 RUBY_PORTREVISION=	1
 RUBY_PORTEPOCH=		1
 RUBY27=			""	# PLIST_SUB helpers
 
 . elif ${RUBY_VER} == 3.0
 #
 # Ruby 3.0
 #
 RUBY_DISTVERSION=	3.0.3
 RUBY_PORTREVISION=	0
 RUBY_PORTEPOCH=		1
 RUBY30=			""	# PLIST_SUB helpers
 . elif ${RUBY_VER} == 3.1
 #
 # Ruby 3.1
 #
 RUBY_DISTVERSION=	3.1.1
 RUBY_PORTREVISION=	0
 RUBY_PORTEPOCH=		1
 RUBY31=			""	# PLIST_SUB helpers
 
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
 . else
 #
 # Other versions
 #
-IGNORE=	Only ruby 2.6, 2.7, 3.0 and 3.1 are supported
+IGNORE=	Only ruby 2.7, 3.0 and 3.1 are supported
 _INVALID_RUBY_VER=	1
 . endif
 RUBY_VERSION=	${RUBY_DISTVERSION:C/^([0-9]+\.[0-9]+\.[0-9]+).*/\1/}
 .endif # defined(RUBY_VER)
 
 .if !defined(_INVALID_RUBY_VER)
 
-RUBY26?=		"@comment "
 RUBY27?=		"@comment "
 RUBY30?=		"@comment "
 RUBY31?=		"@comment "
 
 .if defined(BROKEN_RUBY${RUBY_VER:R}${RUBY_VER:E})
 .if ${BROKEN_RUBY${RUBY_VER:R}${RUBY_VER:E}} == "yes"
 BROKEN=			does not build with Ruby ${RUBY_VER}
 .else
 BROKEN=			${BROKEN_RUBY${RUBY_VER:R}${RUBY_VER:E}}
 .endif
 .endif
 
 RUBY_WRKSRC=		${WRKDIR}/ruby-${RUBY_DISTVERSION}
 
 RUBY_CONFIGURE_ARGS+=	--with-rubyhdrdir="${PREFIX}/include/ruby-${RUBY_VER}/" \
 			--with-rubylibprefix="${PREFIX}/lib/ruby" \
 			--docdir="${RUBY_DOCDIR}" \
 			--with-soname=ruby${RUBY_SUFFIX}
 
 CONFIGURE_TARGET?=	${ARCH}-portbld-${OPSYS:tl}${OSREL:C/\..*//}
 
 RUBY_ARCH?=		${ARCH}-${OPSYS:tl}${OSREL:C/\..*//}
 
 _RUBY_SYSLIBDIR?=	${PREFIX}/lib
 _RUBY_SITEDIR?=		${_RUBY_SYSLIBDIR}/ruby/site_ruby
 _RUBY_VENDORDIR?=	${_RUBY_SYSLIBDIR}/ruby/vendor_ruby
 .endif
 .endif
 #      defined(RUBY)
 
 .if !defined(_INVALID_RUBY_VER)
 
 RUBY_DEFAULT_SUFFIX?=	${RUBY_DEFAULT_VER:S/.//}
 
 RUBY_PORTVERSION?=	${RUBY_DISTVERSION:tl:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g}
 MASTER_SITE_SUBDIR_RUBY?=	${RUBY_VER}
 RUBY_DISTNAME?=		ruby-${RUBY_DISTVERSION}
 
 RUBY_WRKSRC?=		${WRKDIR}/${RUBY_DISTNAME}
 
 RUBY_RELVERSION_CODE?=	${RUBY_RELVERSION:S/.//g}
 RUBY_VERSION_CODE?=	${RUBY_VERSION:S/.//g}
 RUBY_VER=		${RUBY_VERSION:C/([[:digit:]]+\.[[:digit:]]+).*/\1/}
 RUBY_SUFFIX=		${RUBY_VER:S/.//}
 
 RUBY_WITHOUT_SUFFIX?=	${LOCALBASE}/bin/ruby
 RUBY_WITH_SUFFIX?=	${RUBY_WITHOUT_SUFFIX}${RUBY_SUFFIX}
 
 RUBY_PKGNAMEPREFIX?=	ruby${RUBY_SUFFIX}-
 RUBY_SHLIBVER?=		${RUBY_VER:S/.//}
 
 RUBY_CONFIGURE_ARGS+=	--program-prefix=""
 
 .if ${RUBY_VER} != ${RUBY_DEFAULT_VER}
 DEPENDS_ARGS+=		RUBY_VER=${RUBY_VER}
 .endif
 
 RUBY_CONFIGURE_ARGS+=	--program-suffix="${RUBY_SUFFIX}"
 
 RUBY_MODNAME?=		${PORTNAME}
 
 # Commands
 .if ${RUBY_VER} < 2.7
 RUBY_RDOC?=		${LOCALBASE}/bin/rdoc${RUBY_VER:S/.//}
 .else
 RUBY_RDOC?=		${LOCALBASE}/bin/rdoc
 .endif
 
 # Ports
 RUBY_BASE_PORT?=	lang/ruby${RUBY_VER:S/.//}
 RUBY_PORT?=		${RUBY_BASE_PORT}
 
 # Depends
 DEPEND_RUBY?=		${RUBY}:${RUBY_PORT}
 
 # Directories
 RUBY_LIBDIR?=		${_RUBY_SYSLIBDIR}/ruby/${RUBY_VER}
 RUBY_ARCHLIBDIR?=	${RUBY_LIBDIR}/${RUBY_ARCH}
 RUBY_SITELIBDIR?=	${_RUBY_SITEDIR}/${RUBY_VER}
 RUBY_SITEARCHLIBDIR?=	${RUBY_SITELIBDIR}/${RUBY_ARCH}
 RUBY_VENDORLIBDIR?=	${_RUBY_VENDORDIR}/${RUBY_VER}
 RUBY_VENDORARCHLIBDIR?=	${RUBY_VENDORLIBDIR}/${RUBY_ARCH}
 RUBY_DOCDIR?=		${PREFIX}/share/doc/ruby${RUBY_SUFFIX}
 RUBY_EXAMPLESDIR?=	${PREFIX}/share/examples/ruby${RUBY_SUFFIX}
 RUBY_RIDIR?=		${PREFIX}/share/ri/${RUBY_VER}/system
 RUBY_SITERIDIR?=	${PREFIX}/share/ri/${RUBY_VER}/site
 RUBY_MODDOCDIR?=	${RUBY_DOCDIR}/${RUBY_MODNAME}
 RUBY_MODEXAMPLESDIR?=	${RUBY_EXAMPLESDIR}/${RUBY_MODNAME}
 
 # PLIST
 PLIST_RUBY_DIRS=	RUBY_LIBDIR="${RUBY_LIBDIR}" \
 			RUBY_ARCHLIBDIR="${RUBY_ARCHLIBDIR}" \
 			RUBY_SITELIBDIR="${RUBY_SITELIBDIR}" \
 			RUBY_SITEARCHLIBDIR="${RUBY_SITEARCHLIBDIR}" \
 			RUBY_VENDORLIBDIR="${RUBY_VENDORLIBDIR}" \
 			RUBY_VENDORARCHLIBDIR="${RUBY_VENDORARCHLIBDIR}" \
 			RUBY_MODDOCDIR="${RUBY_MODDOCDIR}" \
 			RUBY_MODEXAMPLESDIR="${RUBY_MODEXAMPLESDIR}" \
 			RUBY_DOCDIR="${RUBY_DOCDIR}" \
 			RUBY_EXAMPLESDIR="${RUBY_EXAMPLESDIR}" \
 			RUBY_RIDIR="${RUBY_RIDIR}" \
 			RUBY_SITERIDIR="${RUBY_SITERIDIR}"
 
 PLIST_SUB+=		${PLIST_RUBY_DIRS:C,DIR="(${LOCALBASE}|${PREFIX})/,DIR=",} \
 			RUBY_VERSION="${RUBY_VERSION}" \
 			RUBY_VER="${RUBY_VER}" \
 			RUBY_SHLIBVER="${RUBY_SHLIBVER}" \
 			RUBY_ARCH="${RUBY_ARCH}" \
 			RUBY_SUFFIX="${RUBY_SUFFIX}" \
 			RUBY_DEFAULT_SUFFIX="${RUBY_DEFAULT_SUFFIX}" \
-			RUBY26=${RUBY26} \
 			RUBY27=${RUBY27} \
 			RUBY30=${RUBY30} \
 			RUBY31=${RUBY31}
 
 .if ${PORT_OPTIONS:MDEBUG}
 RUBY_FLAGS+=	-d
 .endif
 
 #
 # extconf.rb support
 #
 .if defined(USE_RUBY_EXTCONF)
 USE_RUBY=		yes
 
 RUBY_EXTCONF?=		extconf.rb
 CONFIGURE_ARGS+=	--with-opt-dir="${LOCALBASE}"
 CONFIGURE_ENV+=		RB_USER_INSTALL=yes
 
 do-configure:	ruby-extconf-configure
 
 ruby-extconf-configure:
 .if defined(RUBY_EXTCONF_SUBDIRS)
 .for d in ${RUBY_EXTCONF_SUBDIRS}
 	@${ECHO_MSG} "===>  Running ${RUBY_EXTCONF} in ${d} to configure"
 	@cd ${CONFIGURE_WRKSRC}/${d}; \
 	${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
 .endfor
 .else
 	@${ECHO_MSG} "===>  Running ${RUBY_EXTCONF} to configure"
 	@cd ${CONFIGURE_WRKSRC}; \
 	${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_EXTCONF} ${CONFIGURE_ARGS}
 .endif
 .endif
 
 #
 # setup.rb support
 #
 .if defined(USE_RUBY_SETUP)
 RUBY_SETUP?=		setup.rb
 
 do-configure:	ruby-setup-configure
 
 ruby-setup-configure:
 	@${ECHO_MSG} "===>  Running ${RUBY_SETUP} to configure"
 	@cd ${BUILD_WRKSRC}; \
 	${SETENV} ${CONFIGURE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} config ${CONFIGURE_ARGS}
 
 do-build:	ruby-setup-build
 
 ruby-setup-build:
 	@${ECHO_MSG} "===>  Running ${RUBY_SETUP} to build"
 	@cd ${BUILD_WRKSRC}; \
 	${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} setup
 
 do-install:	ruby-setup-install
 
 ruby-setup-install:
 	@${ECHO_MSG} "===>  Running ${RUBY_SETUP} to install"
 	@cd ${INSTALL_WRKSRC}; \
 	${SETENV} ${MAKE_ENV} ${RUBY} ${RUBY_FLAGS} ${RUBY_SETUP} install --prefix=${STAGEDIR}
 .endif
 
 .if defined(USE_RUBY)
 .if !defined(RUBY_NO_BUILD_DEPENDS)
 EXTRACT_DEPENDS+=	${DEPEND_RUBY}
 PATCH_DEPENDS+=		${DEPEND_RUBY}
 BUILD_DEPENDS+=		${DEPEND_RUBY}
 .endif
 .if !defined(RUBY_NO_RUN_DEPENDS)
 RUN_DEPENDS+=		${DEPEND_RUBY}
 .endif
 .endif
 
 .endif # _INVALID_RUBY_VER
 .endif