Page MenuHomeFreeBSD
Files F103283346

D25858.diff
No OneTemporary
Actions

D25858.diff
View Options

Index: head/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c
===================================================================
--- head/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c
+++ head/sys/arm/broadcom/bcm2835/raspberrypi_gpio.c
@@ -0,0 +1,457 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2012 Oleksandr Tymoshenko <gonzo@FreeBSD.org>
+ * Copyright (c) 2012-2015 Luiz Otavio O Souza <loos@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "opt_platform.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/gpio.h>
+#include <sys/kernel.h>
+#include <sys/lock.h>
+#include <sys/module.h>
+#include <sys/sx.h>
+#include <sys/proc.h>
+
+#include <dev/gpio/gpiobusvar.h>
+#include <dev/ofw/ofw_bus.h>
+
+#include <arm/broadcom/bcm2835/bcm2835_firmware.h>
+
+#include "gpio_if.h"
+
+#define RPI_FW_GPIO_PINS 8
+#define RPI_FW_GPIO_BASE 128
+#define RPI_FW_GPIO_DEFAULT_CAPS (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT)
+
+struct rpi_fw_gpio_softc {
+ device_t sc_busdev;
+ device_t sc_firmware;
+ struct sx sc_sx;
+ struct gpio_pin sc_gpio_pins[RPI_FW_GPIO_PINS];
+ uint8_t sc_gpio_state;
+};
+
+#define RPI_FW_GPIO_LOCK(_sc) sx_xlock(&(_sc)->sc_sx)
+#define RPI_FW_GPIO_UNLOCK(_sc) sx_xunlock(&(_sc)->sc_sx)
+
+static struct ofw_compat_data compat_data[] = {
+ {"raspberrypi,firmware-gpio", 1},
+ {NULL, 0}
+};
+
+static int
+rpi_fw_gpio_pin_configure(struct rpi_fw_gpio_softc *sc, struct gpio_pin *pin,
+ unsigned int flags)
+{
+ union msg_get_gpio_config old_cfg;
+ union msg_set_gpio_config new_cfg;
+ int rv;
+
+ bzero(&old_cfg, sizeof(old_cfg));
+ bzero(&new_cfg, sizeof(new_cfg));
+ old_cfg.req.gpio = RPI_FW_GPIO_BASE + pin->gp_pin;
+
+ RPI_FW_GPIO_LOCK(sc);
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_GET_GPIO_CONFIG, &old_cfg, sizeof(old_cfg));
+ if (rv == 0 && old_cfg.resp.gpio != 0)
+ rv = EIO;
+ if (rv != 0)
+ goto fail;
+
+ new_cfg.req.gpio = RPI_FW_GPIO_BASE + pin->gp_pin;
+ if (flags & GPIO_PIN_INPUT) {
+ new_cfg.req.dir = BCM2835_FIRMWARE_GPIO_IN;
+ new_cfg.req.state = 0;
+ pin->gp_flags = GPIO_PIN_INPUT;
+ } else if (flags & GPIO_PIN_OUTPUT) {
+ new_cfg.req.dir = BCM2835_FIRMWARE_GPIO_OUT;
+ if (flags & (GPIO_PIN_PRESET_HIGH | GPIO_PIN_PRESET_LOW)) {
+ if (flags & GPIO_PIN_PRESET_HIGH) {
+ new_cfg.req.state = 1;
+ sc->sc_gpio_state |= (1 << pin->gp_pin);
+ } else {
+ new_cfg.req.state = 0;
+ sc->sc_gpio_state &= ~(1 << pin->gp_pin);
+ }
+ } else {
+ if ((sc->sc_gpio_state & (1 << pin->gp_pin)) != 0) {
+ new_cfg.req.state = 1;
+ } else {
+ new_cfg.req.state = 0;
+ }
+ }
+ pin->gp_flags = GPIO_PIN_OUTPUT;
+ } else {
+ new_cfg.req.dir = old_cfg.resp.dir;
+ /* Use the old state to decide high/low */
+ if ((sc->sc_gpio_state & (1 << pin->gp_pin)) != 0)
+ new_cfg.req.state = 1;
+ else
+ new_cfg.req.state = 0;
+ }
+ new_cfg.req.pol = old_cfg.resp.pol;
+ new_cfg.req.term_en = 0;
+ new_cfg.req.term_pull_up = 0;
+
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_SET_GPIO_CONFIG, &new_cfg, sizeof(new_cfg));
+
+fail:
+ RPI_FW_GPIO_UNLOCK(sc);
+
+ return (rv);
+}
+
+static device_t
+rpi_fw_gpio_get_bus(device_t dev)
+{
+ struct rpi_fw_gpio_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ return (sc->sc_busdev);
+}
+
+static int
+rpi_fw_gpio_pin_max(device_t dev, int *maxpin)
+{
+
+ *maxpin = RPI_FW_GPIO_PINS - 1;
+ return (0);
+}
+
+static int
+rpi_fw_gpio_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps)
+{
+ struct rpi_fw_gpio_softc *sc;
+ int i;
+
+ sc = device_get_softc(dev);
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ *caps = RPI_FW_GPIO_DEFAULT_CAPS;
+ return (0);
+}
+
+static int
+rpi_fw_gpio_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags)
+{
+ struct rpi_fw_gpio_softc *sc = device_get_softc(dev);
+ int i;
+
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ RPI_FW_GPIO_LOCK(sc);
+ *flags = sc->sc_gpio_pins[i].gp_flags;
+ RPI_FW_GPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+rpi_fw_gpio_pin_getname(device_t dev, uint32_t pin, char *name)
+{
+ struct rpi_fw_gpio_softc *sc;
+ int i;
+
+ sc = device_get_softc(dev);
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ RPI_FW_GPIO_LOCK(sc);
+ memcpy(name, sc->sc_gpio_pins[i].gp_name, GPIOMAXNAME);
+ RPI_FW_GPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+rpi_fw_gpio_pin_setflags(device_t dev, uint32_t pin, uint32_t flags)
+{
+ struct rpi_fw_gpio_softc *sc;
+ int i;
+
+ sc = device_get_softc(dev);
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ return (rpi_fw_gpio_pin_configure(sc, &sc->sc_gpio_pins[i], flags));
+}
+
+static int
+rpi_fw_gpio_pin_set(device_t dev, uint32_t pin, unsigned int value)
+{
+ struct rpi_fw_gpio_softc *sc;
+ union msg_set_gpio_state state;
+ int i, rv;
+
+ sc = device_get_softc(dev);
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ state.req.gpio = RPI_FW_GPIO_BASE + pin;
+ state.req.state = value;
+
+ RPI_FW_GPIO_LOCK(sc);
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_SET_GPIO_STATE, &state, sizeof(state));
+ /* The firmware sets gpio to 0 on success */
+ if (rv == 0 && state.resp.gpio != 0)
+ rv = EINVAL;
+ if (rv == 0) {
+ sc->sc_gpio_pins[i].gp_flags &= ~(GPIO_PIN_PRESET_HIGH |
+ GPIO_PIN_PRESET_LOW);
+ if (value)
+ sc->sc_gpio_state |= (1 << i);
+ else
+ sc->sc_gpio_state &= ~(1 << i);
+ }
+ RPI_FW_GPIO_UNLOCK(sc);
+
+ return (rv);
+}
+
+static int
+rpi_fw_gpio_pin_get(device_t dev, uint32_t pin, unsigned int *val)
+{
+ struct rpi_fw_gpio_softc *sc;
+ union msg_get_gpio_state state;
+ int i, rv;
+
+ sc = device_get_softc(dev);
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ bzero(&state, sizeof(state));
+ state.req.gpio = RPI_FW_GPIO_BASE + pin;
+
+ RPI_FW_GPIO_LOCK(sc);
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_GET_GPIO_STATE, &state, sizeof(state));
+ RPI_FW_GPIO_UNLOCK(sc);
+
+ /* The firmware sets gpio to 0 on success */
+ if (rv == 0 && state.resp.gpio != 0)
+ rv = EINVAL;
+ if (rv == 0)
+ *val = !state.resp.state;
+
+ return (rv);
+}
+
+static int
+rpi_fw_gpio_pin_toggle(device_t dev, uint32_t pin)
+{
+ struct rpi_fw_gpio_softc *sc;
+ union msg_get_gpio_state old_state;
+ union msg_set_gpio_state new_state;
+ int i, rv;
+
+ sc = device_get_softc(dev);
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ if (sc->sc_gpio_pins[i].gp_pin == pin)
+ break;
+ }
+ if (i >= RPI_FW_GPIO_PINS)
+ return (EINVAL);
+
+ bzero(&old_state, sizeof(old_state));
+ bzero(&new_state, sizeof(new_state));
+
+ old_state.req.gpio = RPI_FW_GPIO_BASE + pin;
+ new_state.req.gpio = RPI_FW_GPIO_BASE + pin;
+
+ RPI_FW_GPIO_LOCK(sc);
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_GET_GPIO_STATE, &old_state, sizeof(old_state));
+ /* The firmware sets gpio to 0 on success */
+ if (rv == 0 && old_state.resp.gpio == 0) {
+ /* Set the new state to invert the GPIO */
+ new_state.req.state = !old_state.resp.state;
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_SET_GPIO_STATE, &new_state,
+ sizeof(new_state));
+ }
+ if (rv == 0 && (old_state.resp.gpio != 0 || new_state.resp.gpio != 0))
+ rv = EINVAL;
+ RPI_FW_GPIO_UNLOCK(sc);
+
+ return (rv);
+}
+
+static int
+rpi_fw_gpio_probe(device_t dev)
+{
+
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
+ return (ENXIO);
+
+ device_set_desc(dev, "Raspberry Pi Firmware GPIO controller");
+ return (BUS_PROBE_DEFAULT);
+}
+
+static int
+rpi_fw_gpio_attach(device_t dev)
+{
+ union msg_get_gpio_config cfg;
+ struct rpi_fw_gpio_softc *sc;
+ char *names;
+ phandle_t gpio;
+ int i, nelems, elm_pos, rv;
+
+ sc = device_get_softc(dev);
+ sc->sc_firmware = device_get_parent(dev);
+ sx_init(&sc->sc_sx, "Raspberry Pi firmware gpio");
+ /* Find our node. */
+ gpio = ofw_bus_get_node(dev);
+ if (!OF_hasprop(gpio, "gpio-controller"))
+ /* This is not a GPIO controller. */
+ goto fail;
+
+ nelems = OF_getprop_alloc(gpio, "gpio-line-names", (void **)&names);
+ if (nelems <= 0)
+ names = NULL;
+ elm_pos = 0;
+ for (i = 0; i < RPI_FW_GPIO_PINS; i++) {
+ /* Set the current pin name */
+ if (names != NULL && elm_pos < nelems &&
+ names[elm_pos] != '\0') {
+ snprintf(sc->sc_gpio_pins[i].gp_name, GPIOMAXNAME,
+ "%s", names + elm_pos);
+ /* Find the next pin name */
+ elm_pos += strlen(names + elm_pos) + 1;
+ } else {
+ snprintf(sc->sc_gpio_pins[i].gp_name, GPIOMAXNAME,
+ "pin %d", i);
+ }
+
+ sc->sc_gpio_pins[i].gp_pin = i;
+ sc->sc_gpio_pins[i].gp_caps = RPI_FW_GPIO_DEFAULT_CAPS;
+
+ bzero(&cfg, sizeof(cfg));
+ cfg.req.gpio = RPI_FW_GPIO_BASE + i;
+ rv = bcm2835_firmware_property(sc->sc_firmware,
+ BCM2835_FIRMWARE_TAG_GET_GPIO_CONFIG, &cfg, sizeof(cfg));
+ if (rv == 0 && cfg.resp.gpio == 0) {
+ if (cfg.resp.dir == BCM2835_FIRMWARE_GPIO_IN)
+ sc->sc_gpio_pins[i].gp_flags = GPIO_PIN_INPUT;
+ else
+ sc->sc_gpio_pins[i].gp_flags = GPIO_PIN_OUTPUT;
+ } else {
+ sc->sc_gpio_pins[i].gp_flags = GPIO_PIN_INPUT;
+ }
+ }
+ free(names, M_OFWPROP);
+ sc->sc_busdev = gpiobus_attach_bus(dev);
+ if (sc->sc_busdev == NULL)
+ goto fail;
+
+ return (0);
+
+fail:
+ sx_destroy(&sc->sc_sx);
+
+ return (ENXIO);
+}
+
+static int
+rpi_fw_gpio_detach(device_t dev)
+{
+
+ return (EBUSY);
+}
+
+static device_method_t rpi_fw_gpio_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, rpi_fw_gpio_probe),
+ DEVMETHOD(device_attach, rpi_fw_gpio_attach),
+ DEVMETHOD(device_detach, rpi_fw_gpio_detach),
+
+ /* GPIO protocol */
+ DEVMETHOD(gpio_get_bus, rpi_fw_gpio_get_bus),
+ DEVMETHOD(gpio_pin_max, rpi_fw_gpio_pin_max),
+ DEVMETHOD(gpio_pin_getname, rpi_fw_gpio_pin_getname),
+ DEVMETHOD(gpio_pin_getflags, rpi_fw_gpio_pin_getflags),
+ DEVMETHOD(gpio_pin_getcaps, rpi_fw_gpio_pin_getcaps),
+ DEVMETHOD(gpio_pin_setflags, rpi_fw_gpio_pin_setflags),
+ DEVMETHOD(gpio_pin_get, rpi_fw_gpio_pin_get),
+ DEVMETHOD(gpio_pin_set, rpi_fw_gpio_pin_set),
+ DEVMETHOD(gpio_pin_toggle, rpi_fw_gpio_pin_toggle),
+
+ DEVMETHOD_END
+};
+
+static devclass_t rpi_fw_gpio_devclass;
+
+static driver_t rpi_fw_gpio_driver = {
+ "gpio",
+ rpi_fw_gpio_methods,
+ sizeof(struct rpi_fw_gpio_softc),
+};
+
+EARLY_DRIVER_MODULE(rpi_fw_gpio, bcm2835_firmware, rpi_fw_gpio_driver,
+ rpi_fw_gpio_devclass, 0, 0, BUS_PASS_INTERRUPT + BUS_PASS_ORDER_LATE);
Index: head/sys/conf/files.arm64
===================================================================
--- head/sys/conf/files.arm64
+++ head/sys/conf/files.arm64
@@ -108,6 +108,7 @@
arm/broadcom/bcm2835/bcm283x_dwc_fdt.c optional dwcotg fdt soc_brcm_bcm2837 | dwcotg fdt soc_brcm_bcm2838
arm/broadcom/bcm2835/bcm2838_pci.c optional soc_brcm_bcm2838 fdt pci
arm/broadcom/bcm2835/bcm2838_xhci.c optional soc_brcm_bcm2838 fdt pci xhci
+arm/broadcom/bcm2835/raspberrypi_gpio.c optional soc_brcm_bcm2837 gpio | soc_brcm_bcm2838 gpio
arm/freescale/vybrid/vf_i2c.c optional vf_i2c iicbus SOC_NXP_LS
arm/mv/a37x0_gpio.c optional a37x0_gpio gpio fdt
arm/mv/a37x0_iic.c optional a37x0_iic iicbus fdt

File Metadata

Mime Type
text/plain
Expires
Sun, Nov 24, 1:29 AM (12 h, 40 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
14812786
Default Alt Text
D25858.diff (12 KB)

Event Timeline