Index: sys/arm64/conf/GENERIC
===================================================================
--- sys/arm64/conf/GENERIC
+++ sys/arm64/conf/GENERIC
@@ -131,6 +131,7 @@
 options 	USB_DEBUG		# enable debug msgs
 device		dwcotg			# DWC OTG controller
 device		ohci			# OHCI PCI->USB interface
+device		ehci			# EHCI PCI->USB interface (USB 2.0)
 device		xhci			# XHCI PCI->USB interface (USB 3.0)
 device		usb			# USB Bus (required)
 device		ukbd			# Keyboard
Index: sys/conf/files.arm64
===================================================================
--- sys/conf/files.arm64
+++ sys/conf/files.arm64
@@ -71,6 +71,7 @@
 dev/uart/uart_cpu_fdt.c		optional	uart fdt
 dev/uart/uart_dev_pl011.c	optional	uart pl011
 dev/usb/controller/dwc_otg_hisi.c optional	dwcotg fdt soc_hisi_hi6220
+dev/usb/controller/generic_ehci.c optional	ehci acpi
 dev/usb/controller/generic_ohci.c optional	ohci fdt
 dev/usb/controller/generic_usb_if.m optional	ohci fdt
 dev/vnic/mrml_bridge.c		optional	vnic fdt
Index: sys/dev/usb/controller/generic_ehci.c
===================================================================
--- /dev/null
+++ sys/dev/usb/controller/generic_ehci.c
@@ -0,0 +1,220 @@
+/*-
+ * Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@freebsd.org>
+ * Copyright (c) 2016 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Andrew Turner under
+ * sponsorship from the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Generic OHCI driver based on the Allwinner A10 OHCI driver
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "opt_bus.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/rman.h>
+#include <sys/condvar.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+
+#include <machine/bus.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbdi.h>
+
+#include <dev/usb/usb_core.h>
+#include <dev/usb/usb_busdma.h>
+#include <dev/usb/usb_process.h>
+#include <dev/usb/usb_util.h>
+
+#include <dev/usb/usb_controller.h>
+#include <dev/usb/usb_bus.h>
+#include <dev/usb/controller/ehci.h>
+#include <dev/usb/controller/ehcireg.h>
+
+#include <contrib/dev/acpica/include/acpi.h>
+#include <contrib/dev/acpica/include/accommon.h>
+#include <dev/acpica/acpivar.h>
+
+static device_attach_t generic_ehci_attach;
+static device_detach_t generic_ehci_detach;
+
+static int
+generic_ehci_probe(device_t self)
+{
+	ACPI_HANDLE h;
+
+	if ((h = acpi_get_handle(self)) == NULL ||
+	    !acpi_MatchHid(h, "PNP0D20"))
+		return (ENXIO);
+
+	device_set_desc(self, "Generic OHCI Controller");
+	return (BUS_PROBE_DEFAULT);
+}
+
+static int
+generic_ehci_attach(device_t self)
+{
+	ehci_softc_t *sc = device_get_softc(self);
+	int err;
+	int rid;
+
+	/* initialise some bus fields */
+	sc->sc_bus.parent = self;
+	sc->sc_bus.devices = sc->sc_devices;
+	sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
+	sc->sc_bus.dma_bits = 32;
+
+	/* get all DMA memory */
+	if (usb_bus_mem_alloc_all(&sc->sc_bus,
+	    USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
+		return (ENOMEM);
+	}
+
+	sc->sc_bus.usbrev = USB_REV_2_0;
+
+	rid = 0;
+	sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
+	    RF_ACTIVE);
+	if (!sc->sc_io_res) {
+		device_printf(self, "Could not map memory\n");
+		goto error;
+	}
+
+	sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
+	sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
+	sc->sc_io_size = rman_get_size(sc->sc_io_res);
+
+	rid = 0;
+	sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
+	    RF_SHAREABLE | RF_ACTIVE);
+	if (sc->sc_irq_res == NULL) {
+		device_printf(self, "Could not allocate irq\n");
+		goto error;
+	}
+	sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
+	if (!sc->sc_bus.bdev) {
+		device_printf(self, "Could not add USB device\n");
+		goto error;
+	}
+	device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
+
+	strlcpy(sc->sc_vendor, "Generic", sizeof(sc->sc_vendor));
+
+	err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
+	    NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
+	if (err) {
+		device_printf(self, "Could not setup irq, %d\n", err);
+		sc->sc_intr_hdl = NULL;
+		goto error;
+	}
+
+	sc->sc_flags |= EHCI_SCFLG_DONTRESET;
+
+	err = ehci_init(sc);
+	if (!err)
+		err = device_probe_and_attach(sc->sc_bus.bdev);
+	if (err)
+		goto error;
+
+	return (0);
+
+error:
+	generic_ehci_detach(self);
+	return (ENXIO);
+}
+
+static int
+generic_ehci_detach(device_t self)
+{
+	ehci_softc_t *sc = device_get_softc(self);
+	device_t bdev;
+	int err;
+
+	if (sc->sc_bus.bdev) {
+		bdev = sc->sc_bus.bdev;
+		device_detach(bdev);
+		device_delete_child(self, bdev);
+	}
+	/* during module unload there are lots of children leftover */
+	device_delete_children(self);
+
+	if (sc->sc_irq_res && sc->sc_intr_hdl) {
+		/*
+		 * only call ehci_detach() after ehci_init()
+		 */
+		ehci_detach(sc);
+
+		err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
+
+		if (err)
+			/* XXX or should we panic? */
+			device_printf(self, "Could not tear down irq, %d\n",
+			    err);
+		sc->sc_intr_hdl = NULL;
+	}
+
+	if (sc->sc_irq_res) {
+		bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
+		sc->sc_irq_res = NULL;
+	}
+	if (sc->sc_io_res) {
+		bus_release_resource(self, SYS_RES_MEMORY, 0,
+		    sc->sc_io_res);
+		sc->sc_io_res = NULL;
+	}
+	usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
+
+	return (0);
+}
+
+static device_method_t ehci_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe,		generic_ehci_probe),
+	DEVMETHOD(device_attach,	generic_ehci_attach),
+	DEVMETHOD(device_detach,	generic_ehci_detach),
+	DEVMETHOD(device_suspend,	bus_generic_suspend),
+	DEVMETHOD(device_resume,	bus_generic_resume),
+	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
+
+	DEVMETHOD_END
+};
+
+static driver_t ehci_driver = {
+	.name = "ehci",
+	.methods = ehci_methods,
+	.size = sizeof(ehci_softc_t),
+};
+
+static devclass_t ehci_devclass;
+
+DRIVER_MODULE(ehci, acpi, ehci_driver, ehci_devclass, 0, 0);
+MODULE_DEPEND(ehci, usb, 1, 1, 1);