Index: head/sys/mips/mediatek/mtk_dotg.c =================================================================== --- head/sys/mips/mediatek/mtk_dotg.c +++ head/sys/mips/mediatek/mtk_dotg.c @@ -0,0 +1,220 @@ +#include +__FBSDID("$FreeBSD$"); + +/*- + * Copyright (c) 2015-2016 Stanislav Galabov. All rights reserved. + * Copyright (c) 2010,2011 Aleksandr Rybalko. All rights reserved. + * Copyright (c) 2007-2008 Hans Petter Selasky. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include + +#define MEM_RID 0 + +static device_probe_t dotg_fdt_probe; +static device_attach_t dotg_fdt_attach; +static device_detach_t dotg_fdt_detach; + +static int +dotg_fdt_probe(device_t dev) +{ + + if (!ofw_bus_status_okay(dev)) + return (ENXIO); + + if (!ofw_bus_is_compatible(dev, "ralink,rt3050-otg")) + return (ENXIO); + + device_set_desc(dev, "MTK DWC-OTG USB Controller"); + return (0); +} + +static int +dotg_fdt_attach(device_t dev) +{ + struct dwc_otg_softc *sc = device_get_softc(dev); + int err, rid; + + /* setup controller interface softc */ + + /* initialise some bus fields */ + sc->sc_mode = DWC_MODE_HOST; + sc->sc_bus.parent = dev; + sc->sc_bus.devices = sc->sc_devices; + sc->sc_bus.devices_max = DWC_OTG_MAX_DEVICES; + sc->sc_bus.dma_bits = 32; + + /* get all DMA memory */ + if (usb_bus_mem_alloc_all(&sc->sc_bus, + USB_GET_DMA_TAG(dev), NULL)) { + printf("No mem\n"); + return (ENOMEM); + } + rid = 0; + sc->sc_io_res = + bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); + if (!(sc->sc_io_res)) { + printf("Can`t alloc MEM\n"); + goto error; + } + sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); + sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); + sc->sc_io_size = rman_get_size(sc->sc_io_res); + + rid = 0; + sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, + &rid, RF_ACTIVE); + if (!(sc->sc_irq_res)) { + printf("Can`t alloc IRQ\n"); + goto error; + } + + sc->sc_bus.bdev = device_add_child(dev, "usbus", -1); + if (!(sc->sc_bus.bdev)) { + printf("Can`t add usbus\n"); + goto error; + } + device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); + + err = bus_setup_intr(dev, sc->sc_irq_res, + INTR_TYPE_TTY | INTR_MPSAFE, dwc_otg_filter_interrupt, + dwc_otg_interrupt, sc, &sc->sc_intr_hdl); + if (err) { + sc->sc_intr_hdl = NULL; + printf("Can`t set IRQ handle\n"); + goto error; + } + + err = dwc_otg_init(sc); + if (err) printf("dotg_init fail\n"); + if (!err) { + err = device_probe_and_attach(sc->sc_bus.bdev); + if (err) printf("device_probe_and_attach fail %d\n", err); + } + if (err) { + goto error; + } + return (0); + +error: + dotg_fdt_detach(dev); + return (ENXIO); +} + +static int +dotg_fdt_detach(device_t dev) +{ + struct dwc_otg_softc *sc = device_get_softc(dev); + device_t bdev; + int err; + + if (sc->sc_bus.bdev) { + bdev = sc->sc_bus.bdev; + device_detach(bdev); + device_delete_child(dev, bdev); + } + /* during module unload there are lots of children leftover */ + device_delete_children(dev); + + if (sc->sc_irq_res && sc->sc_intr_hdl) { + /* + * only call dotg_fdt_uninit() after dotg_fdt_init() + */ + dwc_otg_uninit(sc); + + err = bus_teardown_intr(dev, sc->sc_irq_res, + sc->sc_intr_hdl); + sc->sc_intr_hdl = NULL; + } + if (sc->sc_irq_res) { + bus_release_resource(dev, SYS_RES_IRQ, 0, + sc->sc_irq_res); + sc->sc_irq_res = NULL; + } + if (sc->sc_io_res) { + bus_release_resource(dev, SYS_RES_MEMORY, 0, + sc->sc_io_res); + sc->sc_io_res = NULL; + } + usb_bus_mem_free_all(&sc->sc_bus, NULL); + + return (0); +} + +static device_method_t dotg_fdt_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, dotg_fdt_probe), + DEVMETHOD(device_attach, dotg_fdt_attach), + DEVMETHOD(device_detach, dotg_fdt_detach), + DEVMETHOD(device_suspend, bus_generic_suspend), + DEVMETHOD(device_resume, bus_generic_resume), + DEVMETHOD(device_shutdown, bus_generic_shutdown), + + DEVMETHOD_END +}; + +static driver_t dotg_fdt_driver = { + .name = "dwcotg", + .methods = dotg_fdt_methods, + .size = sizeof(struct dwc_otg_softc), +}; + +static devclass_t dotg_fdt_devclass; + +DRIVER_MODULE(dotg, simplebus, dotg_fdt_driver, dotg_fdt_devclass, 0, 0); Index: head/sys/mips/mediatek/mtk_ehci.c =================================================================== --- head/sys/mips/mediatek/mtk_ehci.c +++ head/sys/mips/mediatek/mtk_ehci.c @@ -0,0 +1,223 @@ +#include +__FBSDID("$FreeBSD$"); + +/*- + * Copyright (c) 2015 Stanislav Galabov. All rights reserved. + * Copyright (c) 2010,2011 Aleksandr Rybalko. All rights reserved. + * Copyright (c) 2007-2008 Hans Petter Selasky. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include + +#define EHCI_HC_DEVSTR "MTK USB 2.0 Controller" + +static device_probe_t ehci_fdt_probe; +static device_attach_t ehci_fdt_attach; +static device_detach_t ehci_fdt_detach; + +static int +ehci_fdt_probe(device_t self) +{ + + if (!ofw_bus_status_okay(self)) + return (ENXIO); + + if (!ofw_bus_is_compatible(self, "ralink,rt3xxx-ehci")) + return (ENXIO); + + device_set_desc(self, EHCI_HC_DEVSTR); + + return (BUS_PROBE_DEFAULT); +} + +static int +ehci_fdt_attach(device_t self) +{ + ehci_softc_t *sc = device_get_softc(self); + int err; + int rid; + + /* initialise some bus fields */ + sc->sc_bus.parent = self; + sc->sc_bus.devices = sc->sc_devices; + sc->sc_bus.devices_max = EHCI_MAX_DEVICES; + sc->sc_bus.dma_bits = 32; + + /* get all DMA memory */ + if (usb_bus_mem_alloc_all(&sc->sc_bus, + USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) { + printf("No mem\n"); + return (ENOMEM); + } + + rid = 0; + sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, + RF_ACTIVE); + if (!sc->sc_io_res) { + device_printf(self, "Could not map memory\n"); + goto error; + } + sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); + sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); + sc->sc_io_size = rman_get_size(sc->sc_io_res); + + rid = 0; + sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, + RF_SHAREABLE | RF_ACTIVE); + if (sc->sc_irq_res == NULL) { + device_printf(self, "Could not allocate irq\n"); + goto error; + } + + sc->sc_bus.bdev = device_add_child(self, "usbus", -1); + if (!(sc->sc_bus.bdev)) { + device_printf(self, "Could not add USB device\n"); + goto error; + } + device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); + device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR); + + sprintf(sc->sc_vendor, "MediaTek"); + + err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, + NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); + if (err) { + device_printf(self, "Could not setup irq, %d\n", err); + sc->sc_intr_hdl = NULL; + goto error; + } + + err = ehci_init(sc); + if (!err) { + err = device_probe_and_attach(sc->sc_bus.bdev); + } + if (err) { + device_printf(self, "USB init failed err=%d\n", err); + goto error; + } + return (0); + +error: + ehci_fdt_detach(self); + return (ENXIO); +} + +static int +ehci_fdt_detach(device_t self) +{ + ehci_softc_t *sc = device_get_softc(self); + device_t bdev; + int err; + + if (sc->sc_bus.bdev) { + bdev = sc->sc_bus.bdev; + device_detach(bdev); + device_delete_child(self, bdev); + } + /* during module unload there are lots of children leftover */ + device_delete_children(self); + + if (sc->sc_irq_res && sc->sc_intr_hdl) { + /* + * only call ehci_detach() after ehci_init() + */ + ehci_detach(sc); + + err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); + if (err) + device_printf(self, "Could not tear down irq, %d\n", + err); + sc->sc_intr_hdl = NULL; + } + if (sc->sc_irq_res) { + bus_release_resource(self, SYS_RES_IRQ, 0, + sc->sc_irq_res); + sc->sc_irq_res = NULL; + } + if (sc->sc_io_res) { + bus_release_resource(self, SYS_RES_MEMORY, 0, + sc->sc_io_res); + sc->sc_io_res = NULL; + } + usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); + + return (0); +} + +static device_method_t ehci_fdt_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, ehci_fdt_probe), + DEVMETHOD(device_attach, ehci_fdt_attach), + DEVMETHOD(device_detach, ehci_fdt_detach), + DEVMETHOD(device_suspend, bus_generic_suspend), + DEVMETHOD(device_resume, bus_generic_resume), + DEVMETHOD(device_shutdown, bus_generic_shutdown), + + DEVMETHOD_END +}; + +static driver_t ehci_fdt_driver = { + .name = "ehci", + .methods = ehci_fdt_methods, + .size = sizeof(ehci_softc_t), +}; + +static devclass_t ehci_fdt_devclass; + +DRIVER_MODULE(ehci, simplebus, ehci_fdt_driver, ehci_fdt_devclass, 0, 0); Index: head/sys/mips/mediatek/mtk_ohci.c =================================================================== --- head/sys/mips/mediatek/mtk_ohci.c +++ head/sys/mips/mediatek/mtk_ohci.c @@ -0,0 +1,223 @@ +#include +__FBSDID("$FreeBSD$"); + +/*- + * Copyright (c) 2015 Stanislav Galabov. All rights reserved. + * Copyright (c) 2010,2011 Aleksandr Rybalko. All rights reserved. + * Copyright (c) 2007-2008 Hans Petter Selasky. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include +#include + +#define OHCI_HC_DEVSTR "MTK USB Controller" + +static device_probe_t ohci_fdt_probe; +static device_attach_t ohci_fdt_attach; +static device_detach_t ohci_fdt_detach; + +static int +ohci_fdt_probe(device_t self) +{ + + if (!ofw_bus_status_okay(self)) + return (ENXIO); + + if (!ofw_bus_is_compatible(self, "ralink,rt3xxx-ohci")) + return (ENXIO); + + device_set_desc(self, OHCI_HC_DEVSTR); + + return (BUS_PROBE_DEFAULT); +} + +static int +ohci_fdt_attach(device_t self) +{ + ohci_softc_t *sc = device_get_softc(self); + int err; + int rid; + + /* initialise some bus fields */ + sc->sc_bus.parent = self; + sc->sc_bus.devices = sc->sc_devices; + sc->sc_bus.devices_max = OHCI_MAX_DEVICES; + sc->sc_bus.dma_bits = 32; + + /* get all DMA memory */ + if (usb_bus_mem_alloc_all(&sc->sc_bus, + USB_GET_DMA_TAG(self), &ohci_iterate_hw_softc)) { + printf("No mem\n"); + return (ENOMEM); + } + + rid = 0; + sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, + RF_ACTIVE); + if (!sc->sc_io_res) { + device_printf(self, "Could not map memory\n"); + goto error; + } + sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); + sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); + sc->sc_io_size = rman_get_size(sc->sc_io_res); + + rid = 0; + sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, + RF_SHAREABLE | RF_ACTIVE); + if (sc->sc_irq_res == NULL) { + device_printf(self, "Could not allocate irq\n"); + goto error; + } + + sc->sc_bus.bdev = device_add_child(self, "usbus", -1); + if (!(sc->sc_bus.bdev)) { + device_printf(self, "Could not add USB device\n"); + goto error; + } + device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); + device_set_desc(sc->sc_bus.bdev, OHCI_HC_DEVSTR); + + sprintf(sc->sc_vendor, "MediaTek"); + + err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, + NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); + if (err) { + device_printf(self, "Could not setup irq, %d\n", err); + sc->sc_intr_hdl = NULL; + goto error; + } + + err = ohci_init(sc); + if (!err) { + err = device_probe_and_attach(sc->sc_bus.bdev); + } + if (err) { + device_printf(self, "USB init failed err=%d\n", err); + goto error; + } + return (0); + +error: + ohci_fdt_detach(self); + return (ENXIO); +} + +static int +ohci_fdt_detach(device_t self) +{ + ohci_softc_t *sc = device_get_softc(self); + device_t bdev; + int err; + + if (sc->sc_bus.bdev) { + bdev = sc->sc_bus.bdev; + device_detach(bdev); + device_delete_child(self, bdev); + } + /* during module unload there are lots of children leftover */ + device_delete_children(self); + + if (sc->sc_irq_res && sc->sc_intr_hdl) { + /* + * only call ohci_detach() after ohci_init() + */ + ohci_detach(sc); + + err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); + if (err) + device_printf(self, "Could not tear down irq, %d\n", + err); + sc->sc_intr_hdl = NULL; + } + if (sc->sc_irq_res) { + bus_release_resource(self, SYS_RES_IRQ, 0, + sc->sc_irq_res); + sc->sc_irq_res = NULL; + } + if (sc->sc_io_res) { + bus_release_resource(self, SYS_RES_MEMORY, 0, + sc->sc_io_res); + sc->sc_io_res = NULL; + } + usb_bus_mem_free_all(&sc->sc_bus, &ohci_iterate_hw_softc); + + return (0); +} + +static device_method_t ohci_fdt_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, ohci_fdt_probe), + DEVMETHOD(device_attach, ohci_fdt_attach), + DEVMETHOD(device_detach, ohci_fdt_detach), + DEVMETHOD(device_suspend, bus_generic_suspend), + DEVMETHOD(device_resume, bus_generic_resume), + DEVMETHOD(device_shutdown, bus_generic_shutdown), + + DEVMETHOD_END +}; + +static driver_t ohci_fdt_driver = { + .name = "ohci", + .methods = ohci_fdt_methods, + .size = sizeof(ohci_softc_t), +}; + +static devclass_t ohci_fdt_devclass; + +DRIVER_MODULE(ohci, simplebus, ohci_fdt_driver, ohci_fdt_devclass, 0, 0); Index: head/sys/mips/mediatek/mtk_usb_phy.h =================================================================== --- head/sys/mips/mediatek/mtk_usb_phy.h +++ head/sys/mips/mediatek/mtk_usb_phy.h @@ -0,0 +1,66 @@ +/*- + * Copyright (c) 2016 Stanislav Galabov. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ +#ifndef _MTK_USB_PHY_H_ +#define _MTK_USB_PHY_H_ + +#define MT7621_FM_FEG_BASE 0x0100 +#define MT7621_U2_BASE 0x0800 +#define MT7621_U2_BASE_P1 0x1000 +#define MT7621_SR_COEF 28 + +#define MT7628_FM_FEG_BASE 0x0f00 +#define MT7628_U2_BASE 0x0800 +#define MT7628_SR_COEF 32 + +#define U2_PHY_AC0 0x00 +#define U2_PHY_AC1 0x04 +#define U2_PHY_AC2 0x08 +#define U2_PHY_ACR0 0x10 +#define SRCAL_EN (1<<23) +#define SRCTRL_MSK 0x7 +#define SRCTRL_OFF 16 +#define SRCTRL (SRCTRL_MSK< +__FBSDID("$FreeBSD$"); + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +#define RESET_ASSERT_DELAY 1000 +#define RESET_DEASSERT_DELAY 10000 + +struct mtk_usb_phy_softc { + device_t dev; + struct resource * res; + uint32_t fm_base; + uint32_t u2_base; + uint32_t sr_coef; + uint32_t socid; +}; + +#define USB_PHY_READ(_sc, _off) bus_read_4((_sc)->res, (_off)) +#define USB_PHY_WRITE(_sc, _off, _val) bus_write_4((_sc)->res, (_off), (_val)) +#define USB_PHY_CLR_SET(_sc, _off, _clr, _set) \ + USB_PHY_WRITE(_sc, _off, ((USB_PHY_READ(_sc, _off) & ~(_clr)) | (_set))) + +#define USB_PHY_READ_U2(_sc, _off) \ + USB_PHY_READ((_sc), ((_sc)->u2_base + (_off))) +#define USB_PHY_WRITE_U2(_sc, _off, _val) \ + USB_PHY_WRITE((_sc), ((_sc)->u2_base + (_off)), (_val)) +#define USB_PHY_CLR_SET_U2(_sc, _off, _clr, _set) \ + USB_PHY_WRITE_U2((_sc), (_off), ((USB_PHY_READ_U2((_sc), (_off)) & \ + ~(_clr)) | (_set))) +#define USB_PHY_BARRIER(_sc) bus_barrier((_sc)->res, 0, 0, \ + BUS_SPACE_BARRIER_WRITE | BUS_SPACE_BARRIER_READ) + +#define USB_PHY_READ_FM(_sc, _off) \ + USB_PHY_READ((_sc), ((_sc)->fm_base + (_off))) +#define USB_PHY_WRITE_FM(_sc, _off) \ + USB_PHY_WRITE((_sc), ((_sc)->fm_base + (_off)), (_val)) +#define USB_PHY_CLR_SET_FM(_sc, _off, _clr, _set) \ + USB_PHY_WRITE_U2((_sc), (_off), ((USB_PHY_READ_U2((_sc), (_off)) & \ + ~(_clr)) | (_set))) + +static void mtk_usb_phy_mt7621_init(device_t); +static void mtk_usb_phy_mt7628_init(device_t); + +static struct ofw_compat_data compat_data[] = { + { "ralink,mt7620a-usbphy", MTK_SOC_MT7620A }, + { "ralink,mt7628an-usbphy", MTK_SOC_MT7628 }, + { "ralink,rt3xxx-usbphy", MTK_SOC_RT3352 }, + { NULL, MTK_SOC_UNKNOWN } +}; + +static int +mtk_usb_phy_probe(device_t dev) +{ + struct mtk_usb_phy_softc *sc = device_get_softc(dev); + + if (!ofw_bus_status_okay(dev)) + return (ENXIO); + if ((sc->socid = + ofw_bus_search_compatible(dev, compat_data)->ocd_data) == + MTK_SOC_UNKNOWN) + return (ENXIO); + + device_set_desc(dev, "MTK USB PHY"); + + return (0); +} + +static int +mtk_usb_phy_attach(device_t dev) +{ + struct mtk_usb_phy_softc * sc = device_get_softc(dev); + phandle_t node; + uint32_t val; + int rid; + + sc->dev = dev; + + /* Get our FDT node and SoC id */ + node = ofw_bus_get_node(dev); + + /* Now let's see about setting USB to host or device mode */ + /* XXX: is it the same for all SoCs? */ + val = mtk_sysctl_get(SYSCTL_SYSCFG1); + if (OF_hasprop(node, "mtk,usb-device")) + val &= ~SYSCFG1_USB_HOST_MODE; + else + val |= SYSCFG1_USB_HOST_MODE; + mtk_sysctl_set(SYSCTL_SYSCFG1, val); + + /* If we have clocks defined - enable them */ + if (OF_hasprop(node, "clocks")) + fdt_clock_enable_all(dev); + + /* If we have resets defined - perform a reset sequence */ + if (OF_hasprop(node, "resets")) { + fdt_reset_assert_all(dev); + DELAY(RESET_ASSERT_DELAY); + fdt_reset_deassert_all(dev); + DELAY(RESET_DEASSERT_DELAY); + } + + /* Careful, some devices actually require resources */ + if (OF_hasprop(node, "reg")) { + rid = 0; + sc->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, + RF_ACTIVE); + if (sc->res == NULL) { + device_printf(dev, "could not map memory\n"); + return (ENXIO); + } + } else { + sc->res = NULL; + } + + /* Some SoCs require specific USB PHY init... handle these */ + switch (sc->socid) { + case MTK_SOC_MT7628: /* Fallthrough */ + case MTK_SOC_MT7688: + if (sc->res == NULL) + return (ENXIO); + sc->fm_base = MT7628_FM_FEG_BASE; + sc->u2_base = MT7628_U2_BASE; + sc->sr_coef = MT7628_SR_COEF; + mtk_usb_phy_mt7628_init(dev); + break; + case MTK_SOC_MT7621: + if (sc->res == NULL) + return (ENXIO); + sc->fm_base = MT7621_FM_FEG_BASE; + sc->u2_base = MT7621_U2_BASE; + sc->sr_coef = MT7621_SR_COEF; + mtk_usb_phy_mt7621_init(dev); + break; + } + + /* We no longer need the resources, release them */ + if (sc->res != NULL) + bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->res); + + return (0); +} + +static int +mtk_usb_phy_detach(device_t dev) +{ + struct mtk_usb_phy_softc *sc = device_get_softc(dev); + phandle_t node; + + /* Get our FDT node */ + node = ofw_bus_get_node(dev); + + /* If we have resets defined - assert them */ + if (OF_hasprop(node, "resets")) + fdt_reset_assert_all(dev); + + /* If we have clocks defined - disable them */ + if (OF_hasprop(node, "clocks")) + fdt_clock_disable_all(dev); + + /* Finally, release resources, if any were allocated */ + if (sc->res != NULL) + bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->res); + + return (0); +} + +static void +mtk_usb_phy_slew_rate_calibration(struct mtk_usb_phy_softc *sc) +{ + uint32_t val; + int i; + + USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, 0, SRCAL_EN); + USB_PHY_BARRIER(sc); + DELAY(1000); + + USB_PHY_CLR_SET_FM(sc, U2_PHY_FMMONR1, 0, FRCK_EN); + USB_PHY_BARRIER(sc); + USB_PHY_CLR_SET_FM(sc, U2_PHY_FMCR0, CYCLECNT, 0x400); + USB_PHY_BARRIER(sc); + USB_PHY_CLR_SET_FM(sc, U2_PHY_FMCR0, 0, FDET_EN); + USB_PHY_BARRIER(sc); + + for (i = 0; i < 1000; i++) { + if ((val = USB_PHY_READ_FM(sc, U2_PHY_FMMONR0)) != 0) { + device_printf(sc->dev, "DONE with FDET\n"); + break; + } + DELAY(10000); + } + device_printf(sc->dev, "After FDET\n"); + + USB_PHY_CLR_SET_FM(sc, U2_PHY_FMCR0, FDET_EN, 0); + USB_PHY_BARRIER(sc); + USB_PHY_CLR_SET_FM(sc, U2_PHY_FMMONR1, FRCK_EN, 0); + USB_PHY_BARRIER(sc); + USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, SRCAL_EN, 0); + USB_PHY_BARRIER(sc); + DELAY(1000); + + if (val == 0) { + USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, SRCTRL, 0x4 << SRCTRL_OFF); + USB_PHY_BARRIER(sc); + } else { + val = ((((1024 * 25 * sc->sr_coef) / val) + 500) / 1000) & + SRCTRL_MSK; + USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, SRCTRL, val << SRCTRL_OFF); + USB_PHY_BARRIER(sc); + } +} + +static void +mtk_usb_phy_mt7621_init(device_t dev) +{ + struct mtk_usb_phy_softc *sc = device_get_softc(dev); + + /* Slew rate calibration only, but for 2 ports */ + mtk_usb_phy_slew_rate_calibration(sc); + + sc->u2_base = MT7621_U2_BASE_P1; + mtk_usb_phy_slew_rate_calibration(sc); +} + +static void +mtk_usb_phy_mt7628_init(device_t dev) +{ + struct mtk_usb_phy_softc *sc = device_get_softc(dev); + + /* XXX: possibly add barriers between the next writes? */ + USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00ffff02); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00555502); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00aaaa02); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00000402); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_AC0, 0x0048086a); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_AC1, 0x4400001c); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_ACR3, 0xc0200000); + USB_PHY_BARRIER(sc); + USB_PHY_WRITE_U2(sc, U2_PHY_DTM0, 0x02000000); + USB_PHY_BARRIER(sc); + + /* Slew rate calibration */ + //mtk_usb_phy_slew_rate_calibration(sc); +} + +static device_method_t mtk_usb_phy_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, mtk_usb_phy_probe), + DEVMETHOD(device_attach, mtk_usb_phy_attach), + DEVMETHOD(device_detach, mtk_usb_phy_detach), + DEVMETHOD(device_suspend, bus_generic_suspend), + DEVMETHOD(device_resume, bus_generic_resume), + DEVMETHOD(device_shutdown, bus_generic_shutdown), + + DEVMETHOD_END +}; + +static driver_t mtk_usb_phy_driver = { + .name = "usbphy", + .methods = mtk_usb_phy_methods, + .size = sizeof(struct mtk_usb_phy_softc), +}; + +static devclass_t mtk_usb_phy_devclass; + +DRIVER_MODULE(usbphy, simplebus, mtk_usb_phy_driver, mtk_usb_phy_devclass, 0, + 0);