Index: head/release/arm/BANANAPI.conf =================================================================== --- head/release/arm/BANANAPI.conf +++ head/release/arm/BANANAPI.conf @@ -7,7 +7,7 @@ EMBEDDED_TARGET="arm" EMBEDDED_TARGET_ARCH="armv6" EMBEDDEDPORTS="sysutils/u-boot-bananapi" -KERNEL="A20" +KERNEL="ALLWINNER" WORLD_FLAGS="${WORLD_FLAGS} UBLDR_LOADADDR=0x42000000" IMAGE_SIZE="1G" PART_SCHEME="MBR" Index: head/release/arm/CUBIEBOARD2.conf =================================================================== --- head/release/arm/CUBIEBOARD2.conf +++ head/release/arm/CUBIEBOARD2.conf @@ -7,7 +7,7 @@ EMBEDDED_TARGET="arm" EMBEDDED_TARGET_ARCH="armv6" EMBEDDEDPORTS="sysutils/u-boot-cubieboard2" -KERNEL="A20" +KERNEL="ALLWINNER" WORLD_FLAGS="${WORLD_FLAGS} UBLDR_LOADADDR=0x42000000" IMAGE_SIZE="1G" PART_SCHEME="MBR" Index: head/sys/arm/allwinner/a10_padconf.c =================================================================== --- head/sys/arm/allwinner/a10_padconf.c +++ head/sys/arm/allwinner/a10_padconf.c @@ -35,6 +35,8 @@ #include +#ifdef SOC_ALLWINNER_A10 + const static struct allwinner_pins a10_pins[] = { {"PA0", 0, 0, {"gpio_in", "gpio_out", "emac", "spi1", "uart2", NULL, NULL, NULL}}, {"PA1", 0, 1, {"gpio_in", "gpio_out", "emac", "spi1", "uart2", NULL, NULL, NULL}}, @@ -225,3 +227,5 @@ .npins = sizeof(a10_pins) / sizeof(struct allwinner_pins), .pins = a10_pins, }; + +#endif /* SOC_ALLWINNER_A10 */ Index: head/sys/arm/allwinner/a20/a20_if_dwc.c =================================================================== --- head/sys/arm/allwinner/a20/a20_if_dwc.c +++ head/sys/arm/allwinner/a20/a20_if_dwc.c @@ -1,145 +0,0 @@ -/*- - * Copyright (c) 2015 Luiz Otavio O Souza - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -__FBSDID("$FreeBSD$"); - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include "if_dwc_if.h" - -static int -a20_if_dwc_probe(device_t dev) -{ - - if (!ofw_bus_status_okay(dev)) - return (ENXIO); - if (!ofw_bus_is_compatible(dev, "allwinner,sun7i-a20-gmac")) - return (ENXIO); - device_set_desc(dev, "A20 Gigabit Ethernet Controller"); - - return (BUS_PROBE_DEFAULT); -} - -static int -a20_if_dwc_init(device_t dev) -{ - const char *tx_parent_name; - char *phy_type; - clk_t clk_tx, clk_tx_parent; - regulator_t reg; - phandle_t node; - int error; - - node = ofw_bus_get_node(dev); - - /* Configure PHY for MII or RGMII mode */ - if (OF_getprop_alloc(node, "phy-mode", 1, (void **)&phy_type)) { - error = clk_get_by_ofw_name(dev, "allwinner_gmac_tx", &clk_tx); - if (error != 0) { - device_printf(dev, "could not get tx clk\n"); - return (error); - } - - if (strcmp(phy_type, "rgmii") == 0) - tx_parent_name = "gmac_int_tx"; - else - tx_parent_name = "mii_phy_tx"; - - error = clk_get_by_name(dev, tx_parent_name, &clk_tx_parent); - if (error != 0) { - device_printf(dev, "could not get clock '%s'\n", - tx_parent_name); - return (error); - } - - error = clk_set_parent_by_clk(clk_tx, clk_tx_parent); - if (error != 0) { - device_printf(dev, "could not set tx clk parent\n"); - return (error); - } - } - - /* Enable PHY regulator if applicable */ - if (regulator_get_by_ofw_property(dev, "phy-supply", ®) == 0) { - error = regulator_enable(reg); - if (error != 0) { - device_printf(dev, "could not enable PHY regulator\n"); - return (error); - } - } - - return (0); -} - -static int -a20_if_dwc_mac_type(device_t dev) -{ - - return (DWC_GMAC_ALT_DESC); -} - -static int -a20_if_dwc_mii_clk(device_t dev) -{ - - return (GMAC_MII_CLK_150_250M_DIV102); -} - -static device_method_t a20_dwc_methods[] = { - DEVMETHOD(device_probe, a20_if_dwc_probe), - - DEVMETHOD(if_dwc_init, a20_if_dwc_init), - DEVMETHOD(if_dwc_mac_type, a20_if_dwc_mac_type), - DEVMETHOD(if_dwc_mii_clk, a20_if_dwc_mii_clk), - - DEVMETHOD_END -}; - -static devclass_t a20_dwc_devclass; - -extern driver_t dwc_driver; - -DEFINE_CLASS_1(dwc, a20_dwc_driver, a20_dwc_methods, sizeof(struct dwc_softc), - dwc_driver); -DRIVER_MODULE(a20_dwc, simplebus, a20_dwc_driver, a20_dwc_devclass, 0, 0); - -MODULE_DEPEND(a20_dwc, dwc, 1, 1, 1); Index: head/sys/arm/allwinner/a20/a20_padconf.c =================================================================== --- head/sys/arm/allwinner/a20/a20_padconf.c +++ head/sys/arm/allwinner/a20/a20_padconf.c @@ -35,6 +35,8 @@ #include +#ifdef SOC_ALLWINNER_A20 + const static struct allwinner_pins a20_pins[] = { {"PA0", 0, 0, {"gpio_in", "gpio_out", "emac", "spi1", "uart2", "gmac", NULL, NULL}}, {"PA1", 0, 1, {"gpio_in", "gpio_out", "emac", "spi1", "uart2", "gmac", NULL, NULL}}, @@ -225,3 +227,5 @@ .npins = sizeof(a20_pins) / sizeof(struct allwinner_pins), .pins = a20_pins, }; + +#endif /* SOC_ALLWINNER_A20 */ Index: head/sys/arm/allwinner/a20/files.a20 =================================================================== --- head/sys/arm/allwinner/a20/files.a20 +++ head/sys/arm/allwinner/a20/files.a20 @@ -1,5 +1,3 @@ # $FreeBSD$ arm/allwinner/a20/a20_padconf.c standard -arm/allwinner/aw_mp.c optional smp -arm/allwinner/a20/a20_if_dwc.c optional dwc Index: head/sys/arm/allwinner/a31/a31_padconf.c =================================================================== --- head/sys/arm/allwinner/a31/a31_padconf.c +++ head/sys/arm/allwinner/a31/a31_padconf.c @@ -35,6 +35,8 @@ #include +#ifdef SOC_ALLWINNER_A31 + const static struct allwinner_pins a31_pins[] = { {"PA0", 0, 0, {"gpio_in", "gpio_out", "gmac", "lcd1", "uart1", NULL, NULL, NULL}}, {"PA1", 0, 1, {"gpio_in", "gpio_out", "gmac", "lcd1", "uart1", NULL, NULL, NULL}}, @@ -214,3 +216,5 @@ .npins = nitems(a31_pins), .pins = a31_pins, }; + +#endif /* SOC_ALLWINNER_A31 */ Index: head/sys/arm/allwinner/a31/a31s_padconf.c =================================================================== --- head/sys/arm/allwinner/a31/a31s_padconf.c +++ head/sys/arm/allwinner/a31/a31s_padconf.c @@ -35,6 +35,8 @@ #include +#ifdef SOC_ALLWINNER_A31S + const static struct allwinner_pins a31s_pins[] = { {"PA0", 0, 0, {"gpio_in", "gpio_out", "gmac", NULL, "uart1", NULL, NULL, NULL}}, {"PA1", 0, 1, {"gpio_in", "gpio_out", "gmac", NULL, "uart1", NULL, NULL, NULL}}, @@ -194,3 +196,5 @@ .npins = nitems(a31s_pins), .pins = a31s_pins, }; + +#endif /* SOC_ALLWINNER_A31S */ Index: head/sys/arm/allwinner/a31/files.a31 =================================================================== --- head/sys/arm/allwinner/a31/files.a31 +++ head/sys/arm/allwinner/a31/files.a31 @@ -0,0 +1,4 @@ +# $FreeBSD$ + +arm/allwinner/a31/a31_padconf.c standard +arm/allwinner/a31/a31s_padconf.c standard Index: head/sys/arm/allwinner/a31/std.a31 =================================================================== --- head/sys/arm/allwinner/a31/std.a31 +++ head/sys/arm/allwinner/a31/std.a31 @@ -0,0 +1,15 @@ +# Allwinner A31 common options +#$FreeBSD$ + +cpu CPU_CORTEXA +machine arm armv6 +makeoptions CONF_CFLAGS="-march=armv7a" + +makeoptions KERNVIRTADDR=0xc0200000 +options KERNVIRTADDR=0xc0200000 + +options IPI_IRQ_START=0 +options IPI_IRQ_END=15 + +files "../allwinner/files.allwinner" +files "../allwinner/a31/files.a31" Index: head/sys/arm/allwinner/aw_if_dwc.c =================================================================== --- head/sys/arm/allwinner/aw_if_dwc.c +++ head/sys/arm/allwinner/aw_if_dwc.c @@ -0,0 +1,145 @@ +/*- + * Copyright (c) 2015 Luiz Otavio O Souza + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#include +__FBSDID("$FreeBSD$"); + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include "if_dwc_if.h" + +static int +a20_if_dwc_probe(device_t dev) +{ + + if (!ofw_bus_status_okay(dev)) + return (ENXIO); + if (!ofw_bus_is_compatible(dev, "allwinner,sun7i-a20-gmac")) + return (ENXIO); + device_set_desc(dev, "A20 Gigabit Ethernet Controller"); + + return (BUS_PROBE_DEFAULT); +} + +static int +a20_if_dwc_init(device_t dev) +{ + const char *tx_parent_name; + char *phy_type; + clk_t clk_tx, clk_tx_parent; + regulator_t reg; + phandle_t node; + int error; + + node = ofw_bus_get_node(dev); + + /* Configure PHY for MII or RGMII mode */ + if (OF_getprop_alloc(node, "phy-mode", 1, (void **)&phy_type)) { + error = clk_get_by_ofw_name(dev, "allwinner_gmac_tx", &clk_tx); + if (error != 0) { + device_printf(dev, "could not get tx clk\n"); + return (error); + } + + if (strcmp(phy_type, "rgmii") == 0) + tx_parent_name = "gmac_int_tx"; + else + tx_parent_name = "mii_phy_tx"; + + error = clk_get_by_name(dev, tx_parent_name, &clk_tx_parent); + if (error != 0) { + device_printf(dev, "could not get clock '%s'\n", + tx_parent_name); + return (error); + } + + error = clk_set_parent_by_clk(clk_tx, clk_tx_parent); + if (error != 0) { + device_printf(dev, "could not set tx clk parent\n"); + return (error); + } + } + + /* Enable PHY regulator if applicable */ + if (regulator_get_by_ofw_property(dev, "phy-supply", ®) == 0) { + error = regulator_enable(reg); + if (error != 0) { + device_printf(dev, "could not enable PHY regulator\n"); + return (error); + } + } + + return (0); +} + +static int +a20_if_dwc_mac_type(device_t dev) +{ + + return (DWC_GMAC_ALT_DESC); +} + +static int +a20_if_dwc_mii_clk(device_t dev) +{ + + return (GMAC_MII_CLK_150_250M_DIV102); +} + +static device_method_t a20_dwc_methods[] = { + DEVMETHOD(device_probe, a20_if_dwc_probe), + + DEVMETHOD(if_dwc_init, a20_if_dwc_init), + DEVMETHOD(if_dwc_mac_type, a20_if_dwc_mac_type), + DEVMETHOD(if_dwc_mii_clk, a20_if_dwc_mii_clk), + + DEVMETHOD_END +}; + +static devclass_t a20_dwc_devclass; + +extern driver_t dwc_driver; + +DEFINE_CLASS_1(dwc, a20_dwc_driver, a20_dwc_methods, sizeof(struct dwc_softc), + dwc_driver); +DRIVER_MODULE(a20_dwc, simplebus, a20_dwc_driver, a20_dwc_devclass, 0, 0); + +MODULE_DEPEND(a20_dwc, dwc, 1, 1, 1); Index: head/sys/arm/allwinner/files.allwinner =================================================================== --- head/sys/arm/allwinner/files.allwinner +++ head/sys/arm/allwinner/files.allwinner @@ -10,10 +10,12 @@ arm/allwinner/a10_gpio.c optional gpio arm/allwinner/a10_mmc.c optional mmc arm/allwinner/a10_sramc.c standard +arm/allwinner/aw_if_dwc.c optional dwc arm/allwinner/aw_rtc.c standard arm/allwinner/aw_wdog.c standard arm/allwinner/a20/a20_cpu_cfg.c standard arm/allwinner/allwinner_machdep.c standard +arm/allwinner/aw_mp.c optional smp arm/allwinner/axp209.c optional axp209 arm/allwinner/if_emac.c optional emac arm/allwinner/sunxi_dma_if.m standard Index: head/sys/arm/allwinner/std.allwinner =================================================================== --- head/sys/arm/allwinner/std.allwinner +++ head/sys/arm/allwinner/std.allwinner @@ -0,0 +1,16 @@ +# Allwinner common options +#$FreeBSD$ + +cpu CPU_CORTEXA +machine arm armv6 +makeoptions CONF_CFLAGS="-march=armv7a" + +makeoptions KERNVIRTADDR=0xc0200000 +options KERNVIRTADDR=0xc0200000 + +options IPI_IRQ_START=0 +options IPI_IRQ_END=15 + +files "../allwinner/files.allwinner" +files "../allwinner/a20/files.a20" +files "../allwinner/a31/files.a31" Index: head/sys/arm/conf/A20 =================================================================== --- head/sys/arm/conf/A20 +++ head/sys/arm/conf/A20 @@ -1,141 +0,0 @@ -# -# A20 -- Custom configuration for the Allwinner A20 ARM SoC -# -# For more information on this file, please read the config(5) manual page, -# and/or the handbook section on Kernel Configuration Files: -# -# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -ident A20 - -include "std.armv6" -include "../allwinner/a20/std.a20" - -options INTRNG - -options SOC_ALLWINNER_A20 - -options HZ=100 -options SCHED_ULE # ULE scheduler -options SMP # Enable multiple cores -options PLATFORM -options PLATFORM_SMP - -# Debugging for use in -current -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options ALT_BREAK_TO_DEBUGGER -#options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB # Enable kernel debugger support -# For minimum debugger support (stable branch) use: -#options KDB_TRACE # Print a stack trace for a panic -# For full debugger support use this instead: -options DDB # Enable the kernel debugger -options INVARIANTS # Enable calls of extra sanity checking -options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -options WITNESS # Enable checks to detect deadlocks and cycles -options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed -#options DIAGNOSTIC - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=dwc0 - -# EXT_RESOURCES pseudo devices -options EXT_RESOURCES -device clk -device phy -device hwreset -device regulator - -# Interrupt controller -device gic - -# ARM Generic Timer -device generic_timer - -# MMC/SD/SDIO Card slot support -device mmc # mmc/sd bus -device mmcsd # mmc/sd flash cards - -# ATA controllers -device ahci # AHCI-compatible SATA controllers -#device ata # Legacy ATA/SATA controllers - -# Console and misc -device uart -device uart_snps -device pty -device snp -device md -device random # Entropy device - -# I2C support -device iicbus -device iic -device twsi -device axp209 # AXP209 Power Management Unit - -# GPIO -device gpio -device gpioled - -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device pass # Passthrough device (direct ATA/SCSI access) - -# USB support -options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. -device usb -options USB_DEBUG -#options USB_REQ_DEBUG -#options USB_VERBOSE -#device uhci -#device ohci -device ehci - -device umass - -# Ethernet -device loop -device ether -device mii -device bpf - -#device emac # 10/100 integrated EMAC controller -device dwc # 10/100/1000 integrated GMAC controller - -# USB ethernet support, requires miibus -device miibus - -# Sound support -device sound - -# Pinmux -device fdt_pinctrl - -# Framebuffer support -device vt -device kbdmux -device ums -device ukbd -device videomode -device hdmi - -# Flattened Device Tree -options FDT # Configure using FDT/DTB data -makeoptions MODULES_EXTRA=dtb/allwinner Index: head/sys/arm/conf/ALLWINNER =================================================================== --- head/sys/arm/conf/ALLWINNER +++ head/sys/arm/conf/ALLWINNER @@ -0,0 +1,143 @@ +# +# ALLWINNER -- Custom configuration for the Allwinner A20 and A31 ARM SoC +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +ident ALLWINNER + +include "std.armv6" +include "../allwinner/std.allwinner" + +options INTRNG + +options SOC_ALLWINNER_A20 +options SOC_ALLWINNER_A31 +options SOC_ALLWINNER_A31S + +options HZ=100 +options SCHED_ULE # ULE scheduler +options SMP # Enable multiple cores +options PLATFORM +options PLATFORM_SMP + +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options ALT_BREAK_TO_DEBUGGER +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options DIAGNOSTIC + +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=dwc0 + +# EXT_RESOURCES pseudo devices +options EXT_RESOURCES +device clk +device phy +device hwreset +device regulator + +# Interrupt controller +device gic + +# ARM Generic Timer +device generic_timer + +# MMC/SD/SDIO Card slot support +device mmc # mmc/sd bus +device mmcsd # mmc/sd flash cards + +# ATA controllers +device ahci # AHCI-compatible SATA controllers +#device ata # Legacy ATA/SATA controllers + +# Console and misc +device uart +device uart_snps +device pty +device snp +device md +device random # Entropy device + +# I2C support +device iicbus +device iic +device twsi +device axp209 # AXP209 Power Management Unit + +# GPIO +device gpio +device gpioled + +device scbus # SCSI bus (required for ATA/SCSI) +device da # Direct Access (disks) +device pass # Passthrough device (direct ATA/SCSI access) + +# USB support +options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. +device usb +options USB_DEBUG +#options USB_REQ_DEBUG +#options USB_VERBOSE +#device uhci +#device ohci +device ehci + +device umass + +# Ethernet +device loop +device ether +device mii +device bpf + +#device emac # 10/100 integrated EMAC controller +device dwc # 10/100/1000 integrated GMAC controller + +# USB ethernet support, requires miibus +device miibus + +# Sound support +device sound + +# Framebuffer support +device vt +device kbdmux +device ums +device ukbd +device videomode +device hdmi + +# Pinmux +device fdt_pinctrl + +# Flattened Device Tree +options FDT # Configure using FDT/DTB data +makeoptions MODULES_EXTRA=dtb/allwinner Index: head/sys/boot/fdt/dts/arm/bananapim2.dts =================================================================== --- head/sys/boot/fdt/dts/arm/bananapim2.dts +++ head/sys/boot/fdt/dts/arm/bananapim2.dts @@ -0,0 +1,33 @@ +/*- + * Copyright (c) 2016 Emmanuel Vadot + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#include "sun6i-a31s-sinovoip-bpi-m2.dts" + +&mmc2 { + status = "disabled"; +}; Index: head/sys/modules/dtb/allwinner/Makefile =================================================================== --- head/sys/modules/dtb/allwinner/Makefile +++ head/sys/modules/dtb/allwinner/Makefile @@ -2,6 +2,7 @@ # All the dts files for allwinner systems we support. DTS= \ bananapi.dts \ + bananapim2.dts \ cubieboard.dts \ cubieboard2.dts \ olimex-a20-som-evb.dts \