diff --git a/share/man/man4/ath10k.4 b/share/man/man4/ath10k.4
--- a/share/man/man4/ath10k.4
+++ b/share/man/man4/ath10k.4
@@ -34,12 +34,10 @@
 if enabled in
 .Xr rc.conf 5 .
 .Pp
-Only if auto-loading is explicitly disabled, place the following
-lines in
-.Xr rc.conf 5
+Only if auto-loading is explicitly disabled, run the following command
 to manually load the driver as a module at boot time:
 .Bd -literal -offset indent
-kld_list="${kld_list} if_ath10k"
+sysrc kld_list+="if_ath10k"
 .Ed
 .Pp
 It is discouraged to load the driver from
diff --git a/share/man/man4/hwpmc.4 b/share/man/man4/hwpmc.4
--- a/share/man/man4/hwpmc.4
+++ b/share/man/man4/hwpmc.4
@@ -47,7 +47,7 @@
 .Pp
 To load the driver as a module at boot time:
 .Bd -literal -offset indent
-sysrc kld_list+=hwpmc
+sysrc kld_list+="hwpmc"
 .Ed
 .Pp
 Alternatively, to compile the driver into the kernel:
diff --git a/share/man/man4/iwlwifi.4 b/share/man/man4/iwlwifi.4
--- a/share/man/man4/iwlwifi.4
+++ b/share/man/man4/iwlwifi.4
@@ -44,7 +44,7 @@
 .Xr rc.conf 5
 to manually load the driver as a module at boot time:
 .Bd -literal -offset indent
-kld_list="${kld_list} if_iwlwifi"
+sysrc kld_list+="if_iwlwifi"
 .Ed
 .Pp
 The driver should automatically load any
@@ -322,6 +322,7 @@
 .Xr networking 7 ,
 .Xr fwget 8 ,
 .Xr ifconfig 8 ,
+.Xr sysrc 8 ,
 .Xr wpa_supplicant 8
 .Sh HISTORY
 The
diff --git a/share/man/man4/iwx.4 b/share/man/man4/iwx.4
--- a/share/man/man4/iwx.4
+++ b/share/man/man4/iwx.4
@@ -30,7 +30,6 @@
 In
 .Xr rc.conf 5 :
 .Cd devmatch_blocklist="if_iwlwifi"
-.Cd kld_list="if_iwx"
 .Pp
 In
 .Xr sysctl.conf 5 :
@@ -46,6 +45,16 @@
 .Xr rc.conf 5 ,
 the driver will be automatically loaded with
 .Xr devmatch 8 .
+.Pp
+To load the driver manually, use
+.Xr kldload 8
+at runtime.
+.Pp
+To load the driver as a module at boot time:
+.Bd -literal -offset indent
+sysrc kld_list+="if_iwx"
+.Ed
+.Pp
 The
 .Nm
 driver can be configured at runtime with
@@ -138,6 +147,7 @@
 .Xr networking 7 ,
 .Xr fwget 8 ,
 .Xr ifconfig 8 ,
+.Xr sysrc 8 ,
 .Xr wpa_supplicant 8
 .Sh HISTORY
 The
diff --git a/share/man/man4/mt7915.4 b/share/man/man4/mt7915.4
--- a/share/man/man4/mt7915.4
+++ b/share/man/man4/mt7915.4
@@ -36,12 +36,10 @@
 if enabled in
 .Xr rc.conf 5 .
 .Pp
-Only if auto-loading is explicitly disabled, place the following
-lines in
-.Xr rc.conf 5
+Only if auto-loading is explicitly disabled, run the following command
 to manually load the driver as a module at boot time:
 .Bd -literal -offset indent
-kld_list="${kld_list} if_mt7915"
+sysrc kld_list+="if_mt7915"
 .Ed
 .Pp
 The driver should automatically load any
@@ -95,6 +93,7 @@
 .Xr networking 7 ,
 .Xr fwget 8 ,
 .Xr ifconfig 8 ,
+.Xr sysrc 8 ,
 .Xr wpa_supplicant 8
 .Sh HISTORY
 The
diff --git a/share/man/man4/mt7921.4 b/share/man/man4/mt7921.4
--- a/share/man/man4/mt7921.4
+++ b/share/man/man4/mt7921.4
@@ -36,12 +36,10 @@
 if enabled in
 .Xr rc.conf 5 .
 .Pp
-Only if auto-loading is explicitly disabled, place the following
-lines in
-.Xr rc.conf 5
+Only if auto-loading is explicitly disabled, run the following command
 to manually load the driver as a module at boot time:
 .Bd -literal -offset indent
-kld_list="${kld_list} if_mt7921"
+sysrc kld_list+="if_mt7921"
 .Ed
 .Pp
 The driver should automatically load any
@@ -95,6 +93,7 @@
 .Xr networking 7 ,
 .Xr fwget 8 ,
 .Xr ifconfig 8 ,
+.Xr sysrc 8 ,
 .Xr wpa_supplicant 8
 .Sh HISTORY
 The
diff --git a/share/man/man4/rtw88.4 b/share/man/man4/rtw88.4
--- a/share/man/man4/rtw88.4
+++ b/share/man/man4/rtw88.4
@@ -20,7 +20,7 @@
 .Xr rc.conf 5
 to manually load the driver as a module at boot time:
 .Bd -literal -offset indent
-kld_list="${kld_list} if_rtw88"
+sysrc kld_list+="if_rtw88"
 .Ed
 .Pp
 It is not possible to load the driver from
@@ -89,6 +89,7 @@
 .Xr networking 7 ,
 .Xr fwget 8 ,
 .Xr ifconfig 8 ,
+.Xr sysrc 8 ,
 .Xr wpa_supplicant 8
 .Sh HISTORY
 The
diff --git a/share/man/man4/rtw89.4 b/share/man/man4/rtw89.4
--- a/share/man/man4/rtw89.4
+++ b/share/man/man4/rtw89.4
@@ -15,12 +15,10 @@
 if enabled in
 .Xr rc.conf 5 .
 .Pp
-Only if auto-loading is explicitly disabled, place the following
-lines in
-.Xr rc.conf 5
-to manually load the driver as a module at boot time:
+Only if auto-loading is explicitly disabled, run the following
+command to manually load the driver as a module at boot time:
 .Bd -literal -offset indent
-kld_list="${kld_list} if_rtw89"
+sysrc kld_list+="if_rtw89"
 .Ed
 .Pp
 It is not possible to load the driver from
@@ -90,6 +88,7 @@
 .Xr networking 7 ,
 .Xr fwget 8 ,
 .Xr ifconfig 8 ,
+.Xr sysrc 8 ,
 .Xr wpa_supplicant 8
 .Sh HISTORY
 The
diff --git a/share/man/man4/uchcom.4 b/share/man/man4/uchcom.4
--- a/share/man/man4/uchcom.4
+++ b/share/man/man4/uchcom.4
@@ -42,10 +42,6 @@
 .Cd "device uchcom"
 .Pp
 In
-.Xr rc.conf 5 :
-.Cd kld_list="uchcom"
-.Pp
-In
 .Xr sysctl.conf 5 :
 .Cd hw.usb.uchcom.debug=1
 .Sh DESCRIPTION
@@ -55,18 +51,20 @@
 If the appropriate hardware is detected,
 the driver will be loaded automatically by
 .Xr devmatch 8 .
-To load the driver manually, add it to the
-.Ic kld_list
-in
-.Xr rc.conf 5 ,
-or use
-.Xr kldload 8
-at runtime.
 The device is accessed through the
 .Xr ucom 4
 driver, which makes it behave like a
 .Xr tty 4 .
 .Pp
+To load the driver as a module at boot time:
+.Bd -literal -offset indent
+sysrc kld_list+="uchcom"
+.Ed
+.Pp
+To load the driver manually use
+.Xr kldload 8
+at runtime.
+.Pp
 Call out through this interface with applications like
 .Xr cu 1
 or
@@ -115,9 +113,14 @@
 .El
 .Sh SEE ALSO
 .Xr cu 1 ,
+.Xr tip 1 ,
 .Xr tty 4 ,
 .Xr ucom 4 ,
-.Xr usb 4
+.Xr usb 4 ,
+.Xr devmatch 8 ,
+.Xr kldload 8 ,
+.Xr sysctl 8 ,
+.Xr sysrc 8
 .Sh HISTORY
 The
 .Nm
diff --git a/share/man/man4/uftdi.4 b/share/man/man4/uftdi.4
--- a/share/man/man4/uftdi.4
+++ b/share/man/man4/uftdi.4
@@ -42,10 +42,6 @@
 .Cd "device uftdi"
 .Pp
 In
-.Xr rc.conf 5 :
-.Cd kld_list="uftdi"
-.Pp
-In
 .Xr sysctl.conf 5 :
 .Cd hw.usb.uftdi.debug=1
 .Cd hw.usb.uftdi.skip_jtag_interfaces=0
@@ -56,13 +52,16 @@
 If the appropriate hardware is detected,
 the driver will be loaded automatically by
 .Xr devmatch 8 .
-To load the driver manually, add it to the
-.Ic kld_list
-in
-.Xr rc.conf 5 ,
-or use
+.Pp
+To load the driver manually, use
 .Xr kldload 8
 at runtime.
+.Pp
+To load the driver as a module at boot time:
+.Bd -literal -offset indent
+sysrc kld_list+="uftdi"
+.Ed
+.Pp
 The device is accessed through the
 .Xr ucom 4
 driver which makes it behave like a
@@ -267,9 +266,11 @@
 .El
 .Sh SEE ALSO
 .Xr cu 1 ,
+.Xr tip 1 ,
 .Xr tty 4 ,
 .Xr ucom 4 ,
-.Xr usb 4
+.Xr usb 4 ,
+.Xr sysrc 8
 .Sh HISTORY
 The
 .Nm
diff --git a/share/man/man4/vmm.4 b/share/man/man4/vmm.4
--- a/share/man/man4/vmm.4
+++ b/share/man/man4/vmm.4
@@ -46,7 +46,7 @@
 .Xr bhyve 4
 hypervisor.
 The following platforms are supported:
-.Bl -bullet -compat
+.Bl -bullet
 .It
 amd64: An Intel CPU with VT-x/EPT or AMD CPU with SVM support is required.
 .It
@@ -87,8 +87,8 @@
 kernel module almost certainly needs to be loaded from
 .Xr loader.conf 5
 rather than by adding it to
-.Va kld_list in
-.Xr rc.conf 5 .
+.Va kld_list with
+.Xr sysrc 8 .
 .Pp
 A large number of PCI device entries may require a string longer than the
 128-character limit of
@@ -145,7 +145,8 @@
 .Xr bhyve 8 ,
 .Xr bhyveload 8 ,
 .Xr devctl 8 ,
-.Xr kldload 8
+.Xr kldload 8 ,
+.Xr sysrc 8
 .Sh HISTORY
 .Nm vmm.ko
 first appeared in
diff --git a/usr.sbin/jail/jail.8 b/usr.sbin/jail/jail.8
--- a/usr.sbin/jail/jail.8
+++ b/usr.sbin/jail/jail.8
@@ -670,7 +670,8 @@
 .Va kld_list
 in the
 .Xr rc.conf 5
-file outside of the jails.
+file outside of the jails using
+.Xr sysrc 8 .
 Similarily, if the
 .Xr gssd 8
 is to be run in a jail, either the kernel
@@ -1538,6 +1539,7 @@
 .Xr shutdown 8 ,
 .Xr sysctl 8 ,
 .Xr syslogd 8 ,
+.Xr sysrc 8 ,
 .Xr umount 8 ,
 .Xr zfs-jail 8 ,
 .Xr extattr 9
diff --git a/usr.sbin/mountd/mountd.8 b/usr.sbin/mountd/mountd.8
--- a/usr.sbin/mountd/mountd.8
+++ b/usr.sbin/mountd/mountd.8
@@ -30,9 +30,7 @@
 .Os
 .Sh NAME
 .Nm mountd
-.Nd service remote
-.Tn NFS
-mount requests
+.Nd service remote NFS mount requests
 .Sh SYNOPSIS
 .Nm
 .Op Fl 2AadelNnRrSs
@@ -42,12 +40,9 @@
 .Sh DESCRIPTION
 The
 .Nm
-utility is the server for
-.Tn NFS
-mount requests from other client machines.
-It listens for service requests at the port indicated in the
-.Tn NFS
-server specification; see
+utility is the server for NFS mount requests from other client machines.
+It listens for service requests at the port indicated in the NFS server
+specification; see
 .%T "Network File System Protocol Specification" ,
 RFC1094, Appendix A and
 .%T "NFS: Network File System Version 3 Protocol Specification" ,
@@ -57,9 +52,7 @@
 .Bl -tag -width indent
 .It Fl 2
 Allow the administrator to force clients to use only the
-version 2
-.Tn NFS
-protocol to mount file systems from this server.
+version 2 NFS protocol to mount file systems from this server.
 .It Fl A
 Silence the warnings related to
 .Dq administrative controls .
@@ -79,7 +72,7 @@
 for the export file line.
 With this option, the exports line will fail, whereas
 without this option, a warning will be generated by
-.Xr syslog 8 ,
+.Xr syslogd 8 ,
 but the export will be done.
 .It Fl d
 Output debugging information.
@@ -217,26 +210,18 @@
 .Pp
 If
 .Nm
-detects that the running kernel does not include
-.Tn NFS
+detects that the running kernel does not include NFS
 support, it will attempt to load a loadable kernel module containing
-.Tn NFS
-code, using
+NFS code, using
 .Xr kldload 2 .
-If this fails, or no
-.Tn NFS
-KLD was available,
+If this fails, or no NFS KLD was available,
 .Nm
 exits with an error.
 When run in a jail, the
 .Xr kldload 2
-must be done outside the jail, typically by adding
-.Dq nfsd
-to
-.Va kld_list
-in the
-.Xr rc.conf 5
-file on the jail host.
+must be done outside the jail, typically by using
+.Xr sysrc 8
+on the jail host.
 .Sh FILES
 .Bl -tag -width /var/run/mountd.pid -compact
 .It Pa /etc/exports
@@ -256,7 +241,8 @@
 .Xr nfsd 8 ,
 .Xr rpcbind 8 ,
 .Xr showmount 8 ,
-.Xr syslog 8
+.Xr syslogd 8 ,
+.Xr sysrc 8
 .Sh HISTORY
 The
 .Nm